summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* drivers/qe: Add more SNUM number for QEHaiying Wang2009-06-12-5/+16
| | | | | | | | | Some QE chips like 8569 need more SNUM numbers for supporting 4 UECs in RGMII- 1000 mode. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* drivers/qe: Change QE RISC ALLOCATION to support 4 RISCsHaiying Wang2009-06-12-12/+52
| | | | | | | | | Also define the QE_RISC_ALLOCATION_RISCs to MACROs instead of using enum, and define MAX_QE_RISC for QE based silicons. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add QE clk supportHaiying Wang2009-06-12-1/+21
| | | | | | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <Timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Added MPC8535/E identifiersKumar Gala2009-06-12-0/+4
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Always attempt ethernet device tree fixupKumar Gala2009-06-12-3/+0
| | | | | | | | | | | Its reasonable that we may have ethernet devices but dont have drivers or support enabled for them in u-boot and want the device tree fixed up. Unconditionally calling the ethernet fixup is fine since if we dont have ethernet nodes that match (or aliases) we will not attempt to do anything. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Timur Tabi <timur@freescale.com>
* drivers/qe: Rename the camel-case identifiers in uecHaiying Wang2009-06-12-18/+18
| | | | | | Rename riscRx/riscTx to risc_rx/risc_tx to comply with Codingstyle. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* 85xx: Add P2020DS supportSrikanth Srinivasan2009-06-12-0/+1882
| | | | | | | | | | | | | The patch adds support for P2020DS reference platform. DDR3 interface uses hard-coded initialization rather than SPD for now and was tested at 667Mhz. Some PIXIS register definitions and associated code sections need to be fixed. TSEC1/2/3, NOR flash, MAC/SYS ID EEPROM, PCIE1/2/3 are all tested under u-boot. Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc512x: MPC5121ADS: Add NAND supportStefan Roese2009-06-12-8/+55
| | | | | | | | | | This patch adds NAND support to the MPC5121ADS board. Please note that the image size increased since NAND support didn't fit in the current image size (256k). Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* nand/mpc512x: Add MPC512x NAND support (NFC)Stefan Roese2009-06-12-0/+693
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds NAND Flash Controller driver for MPC5121 revision 2. All device features, except hardware ECC and power management, are supported. This NFC driver replaces the one orignally posted by John Rigby: "[PATCH] Freescale NFC NAND driver" It's a port of the Linux driver version posted by Piotr Ziecik a few weeks ago. Using this driver has the following advantages (from my point of view): - Compatibility with the Linux NAND driver (e.g. ECC usage) - Better code quality in general - Resulting U-Boot image is a bit smaller (approx. 3k) - Better to sync with newer Linux driver versions The only disadvantage I can see, is that HW-ECC is not supported right now. But this could be added later (e.g. port from Linux driver after it's supported there). Using HW-ECC on the MCP5121 NFC has a general problem because of the ECC usage in the spare area. This collides with JFFS2 for example. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Piotr Ziecik <kosmo@semihalf.com> Cc: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com> Cc: Scott Wood <scottwood@freescale.com>
* mpc512x: Add esd gmbh mecp5123 board supportStefan Roese2009-06-12-0/+917
| | | | | | | MECP5123 is a MPC5121E based module by esd gmbh. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* mcp512x: Add macros for SCFR LPC divisor accessStefan Roese2009-06-12-0/+3
| | | | | | Thos macros will be used by the esd mecp5123 board. Signed-off-by: Stefan Roese <sr@denx.de>
* mpc512x: Fix problem with I2C access before relocationStefan Roese2009-06-12-1/+1
| | | | | | | | | This is needed for the upcoming esd MECP5123 board port which uses I2C EEPROM for environment storage. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Acked-by: Heiko Schocher<hs@denx.de>
* 74xx_7xx: CPCI750: Add CPCI adapter/target supportStefan Roese2009-06-12-15/+49
| | | | | | | | The CPCI750 can be built as CPCI host or adapter/target board. This patch adds support for runtime detection of those variants. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* 74xx_7xx: CPCI750: Enable access to PCI function > 0Stefan Roese2009-06-12-8/+22
| | | | | | | | The Marvell bridge 64360 supports serveral PCI functions, not only 0. This patch enables access to those functions. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* 74xx_7xx: CPCI750: Minor coding style cleanup of cpci750.cStefan Roese2009-06-12-6/+5
| | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* 74xx_7xx: CPCI750: Add loadpci commandStefan Roese2009-06-12-0/+76
| | | | | | | | This command is used to load/boot an OS-image which is transferred from the CPCI host to the CPCI target/adapter. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* 74xx_7xx: CPCI750: Add commandline editing/historyStefan Roese2009-06-12-1/+2
| | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* UBI: Add compile-time check for correct malloc area configurationStefan Roese2009-06-12-0/+4
| | | | | | | | UBI is quite memory greedy and requires at least approx. 512k of malloc area. This patch adds a compile-time check, so that boards will not build with less memory reserved for this area (CONFIG_SYS_MALLOC_LEN). Signed-off-by: Stefan Roese <sr@denx.de>
* sf: new Macronix MX25xx SPI flash driverPrafulla Wadaskar2009-06-12-0/+319
| | | | | | | | | Added macronix SF driver for MTD framework MX25L12805D is supported and tested TBD: sector erase implementation, other deivces support Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* sf: atmel: implement power-of-two write/erase funcsTodor I Mollov2009-06-12-0/+139
| | | | | | Signed-off-by: Todor I Mollov <tmollov@ucsd.edu> Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* mpc85xx: 8536ds: Add USB related CONFIGsVivek Mahajan2009-06-12-2/+12
| | | | | | | | | This patch adds CONFIGs for enabling USB in mpc8536ds and also adds usb_phy_type in CONFIG_EXTRA_ENV_SETTINGS. Also revamps its Copyright. Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* mpc83xx: 8315erdb: Add USB related CONFIGsVivek Mahajan2009-06-12-1/+10
| | | | | | | | | This patch adds CONFIGs for enabling USB in mpc8315erdb and also adds usb_phy_type in CONFIG_EXTRA_ENV_SETTINGS. Also revamps its Copyright. Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* mpc85xx: USB: Add supportVivek Mahajan2009-06-12-1/+6
| | | | | | | | The following patch adds 85xx-specific USB support and also revamps Copyright in immap_85xx.h Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* mpc83xx: USB: Reorganized its supportVivek Mahajan2009-06-12-38/+102
| | | | | | | | | | | | | | | | | The following patch reorganizes/reworks the USB support for mpc83xx as under:- * Moves the 83xx USB clock init from drivers/usb/host/ehci-fsl.c to cpu/mpx83xx/cpu_init.c * Board specific usb_phy_type is read from the environment * Adds USB EHCI specific structure in include/usb/ehci-fsl.h * Copyrights revamped in most of the following files Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* mpc8xxx: USB: Relocates ehci-fsl.h to include/usbVivek Mahajan2009-06-12-1/+1
| | | | | | | | The following patch moves 8xxx-specifc USB #defines from drivers/usb/host/ehci-fsl.h to include/usb. Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* mpc8xxx: USB: Removed reenablement of its interfaceVivek Mahajan2009-06-12-4/+0
| | | | | | | | | | To prepare for the 85xx USB support, which requires interface enablement only once in (specified) order, no different than instructions for enabling the interface under 83xx. It is unknown why the original author enabled the interface twice (checked for references in errata, etc). Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* 83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]xPeter Tyser2009-06-12-85/+85
| | | | | | | | Use the standard lowercase "x" capitalization that other Freescale architectures use for CPU defines to prevent confusion and errors Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xxPeter Tyser2009-06-12-41/+41
| | | | | | | | Use the standard lowercase "xx" capitalization that other Freescale architectures use for CPU defines to prevent confusion and errors Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc512x: Use serial_setbrg() in serial_init() to not duplicate the codeStefan Roese2009-06-12-21/+15
| | | | | | | | This patch removes the duplicated code for baudrate generator configuration in the PSC serial_init() implementation by calling serial_setbrg() instead of duplicating the code. Signed-off-by: Stefan Roese <sr@denx.de>
* mpc512x: Fix PSC divisor calculation for baudrate settingStefan Roese2009-06-12-1/+1
| | | | | | | The wrong input frequency was used in serial_setbrg(). This patch fixes this by using ips_clk as input frequency for the PSC baudrate generator. Signed-off-by: Stefan Roese <sr@denx.de>
* MPC512x: add support for ARIA boardWolfgang Denk2009-06-12-1/+949
| | | | | | | ARIA is a MPC5121E based COM Express module by Dave/DENX. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
* MPC512x: remove include/mpc512x.hWolfgang Denk2009-06-12-760/+383
| | | | | | | | | | | | | | | | | | | | Move needed definitions (register descriptions etc.) from include/mpc512x.h into include/asm-ppc/immap_512x.h. Instead of using a #define'd register offset, use a function that provides the PATA controller's base address. All the rest of include/mpc512x.h are register offset definitions which can be eliminated by proper use of C structures. There are only a few register offsets remaining that are needed in cpu/mpc512x/start.S; for these we provide cpu/mpc512x/asm-offsets.h which is intended as a temporary workaround only. In a later patch this file will be removed, too, and then auto-generated from the respective C structs. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
* MPC512x FEC: get rid of duplicated struct ethernet_regsWolfgang Denk2009-06-12-131/+10
| | | | | | | | Use existing struct fec512x instead. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* MPC512x: use I/O accessors instead of pointer accessesWolfgang Denk2009-06-12-264/+324
| | | | | | | | This commit changes the MPC512x code to use I/O accessor calls (i.e. out_*() and in_*()) instead of using deprecated pointer accesses. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
* MPC512x: add more hardware description to immap_512x.hWolfgang Denk2009-06-12-9/+252
| | | | | | | | | | | | | - add GPIO module description - add Address Latch Timing Register description - add IO Control Memory Map - add FEC Memory Map Also change board/freescale/mpc5121ads/mpc5121ads.c and cpu/mpc512x/iopin.c as needed. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
* Rename ads5121 board into mpc5121adsWolfgang Denk2009-06-12-23/+24
| | | | | | | | | We rename the board so we use a consistent name in U-Boot and in Linux. Also, we use this opportunity to move the board into the Freecale vendor directory. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
* cpu/mpc512x/diu.c: fix warning: assignment from incompatible pointer typeWolfgang Denk2009-06-12-1/+1
| | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
* cpu/mpc512x/pci.c: minor coding style cleanupWolfgang Denk2009-06-12-6/+3
| | | | | | | Get rid of variable declaration in the middle of the code. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
* mpc512x: Move common files to share them by several boardsWolfgang Denk2009-06-12-120/+150
| | | | | | | | | | We will soon see several new MPC521x based boards added. This patch moves files that are not board specific to a common directory so they can be shared by all such ports. It also splits off common IDE code into a new file, cpu/mpc512x/ide.c . Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
* mpc512x: change cpu/mpc512x/Makefile to use Kconfig styleWolfgang Denk2009-06-12-5/+4
| | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
* General help message cleanupWolfgang Denk2009-06-12-496/+507
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk <wd@denx.de>
* Make "usage" messages more helpful.Wolfgang Denk2009-06-12-18/+17
| | | | | | | | | | | | | | | | | | In case of incorrect command invocations U-Boot used to print pretty useless "usage" messages, for example: => nand markbad Usage: nand - NAND sub-system In the result, the user would have to run the "help" command to get the (available) information about correct command usage. Change this, so that this information gets always printed. Note that this changes the user interface of all commands, but hopefully to the better. Signed-off-by: Wolfgang Denk <wd@denx.de>
* nvedit: speed up printing of environmentMike Frysinger2009-06-12-39/+55
| | | | | | | | | | | | The printing code would check the same environment byte multiple times and write to the console one byte at a time. For some devices (such as the Blackfin JTAG console which operates in 8 bytes at a time), this is pretty damned slow. So create a small 16 byte buffer to fill up and send to puts as needed. In the process, unify the different print functions, shrink the resulting code (source and compiled), and avoid excess env reads as those too can be somewhat expensive depending on the board. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* config.mk: remove un-needed REMOTE_BUILD checkJean-Christophe PLAGNIOL-VILLARD2009-06-12-12/+0
| | | | | | | | | | | | | | | | | as $(obj) is empty when in tree build %.s: %.S $(CPP) $(AFLAGS) -o $@ $< and $(obj)%.s: %.S $(CPP) $(AFLAGS) -o $@ $< are the same Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* FAT replace compare_sign with strncmp.Tom Rix2009-06-12-33/+3
| | | | | | | | | | | The static function compare_sign is only used to compare the fs_type string and does not do anything more than what strncmp does. The addition of the trailing '\0' to fs_type, while legal, is not needed because the it is never printed out and strncmp does not depend on NULL terminated strings. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
* Add support for Linux-like kallsysmsMike Frysinger2009-06-12-53/+75
| | | | | | | The kernel stores address<->symbol names in it so things can be decoded at runtime. Do it in U-Boot, and we get nice symbol decoding when crashing. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* cmd_mtdparts.c: allow to omit definitions for default settingsWolfgang Denk2009-06-12-4/+4
| | | | | | | | | | | | There is actually no good reason to enforce that all board configuations must define default settings for "mtdids" and "mtdparts". Actually this may be difficult to handle, especially on boards where different sizes of flash chips can be fit, so there is no real "default" partition map for all boards. Lift this arbitrary limitation. Signed-off-by: Wolfgang Denk <wd@denx.de>
* cmd_mtdparts: Move to common handling of FLASH devices via MTD layerStefan Roese2009-06-12-160/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes all references to the direct CFI FLASH interface (via flash_info[]). Now that all FLASH types currently handled in mtdparts are available (if selected, see below) via the MTD infrastructure. This is NOR, NAND and OneNAND right now. This can be achieved by defining the following options: CONFIG_MTD_DEVICE (for all FLASH types) plus CONFIG_FLASH_CFI_MTD (for NOR FLASH) So we need to add those defines to the board config headers currently using the mtdparts commands. This is done via another patch, so we shouldn't break mtdparts compatibility. One big advantage from this solution is that the cmd_mtdparts.c is *much* cleaner now. Lot's of #ifdef's are removed and the code itself is smaller. Additionally the newly added MDT concatenation feature can new be used via the mtdparts infrastructure and therefor via UBI etc. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Scott Wood <scottwood@freescale.com>
* mtd: Introduce CONFIG_MTD_DEVICE to select compilation of mtdcore.oStefan Roese2009-06-12-3/+15
| | | | | | | | | | | | | This new define enables mtdcore.c compilation and with this we can select the MTD device infrastructure needed for the reworked mtdparts command. We now have the 2 MTD infrastructure defines, CONFIG_MTD_DEVICE and CONFIG_MTD_PARTITIONS. CONFIG_MTD_DEVICE is needed (as explained above) for the "mtdparts" command and CONFIG_MTD_PARTITIONS is needed for UBI. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Scott Wood <scottwood@freescale.com>
* mtd: MTD related config header changes (mtdparts command)Stefan Roese2009-06-12-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | By changing the cmd_mtdparts to only use the MTD infrastructure and not the direct interface to the CFI NOR FLASH driver we now need to add the MTD infrastructure to all boards using those mtdparts commands. This patch adds those components: CONFIG_MTD_DEVICE (for all FLASH types) plus CONFIG_FLASH_CFI_MTD (for NOR FLASH) To all board maintainers: Please test this on your platforms and report any problems/issues found. Thanks. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Ron Madrid <info@sheldoninst.com> Cc: Georg Schardt <schardt@team-ctech.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Martin Krause <martin.krause@tqs.de> Cc: Gary Jennejohn <garyj@denx.de> Cc: Ricardo Ribalda <ricardo.ribalda@uam.es>
generated by cgit v1.1 at 2024-11-17 19:19:27 +0000