summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ENGR00116472-1 U-BOOT upgrade to V2009.08Fred Fan2009-09-14-715/+202
| | | | | | | | | | U-BOOT upgrade from V2009.01 to V2009.08 Initial version for i.MX51 BBG board. Support: FEC, SPI, spi Nor Flash Boot from spi nor flash and mmc/sd Signed-off-by:Fred Fan <r01011@freescale.com>
* ENGR00116243: I2C support for mx51 3ds board.Terry Lv2009-09-10-25/+108
| | | | | | I2C support for mx51 3ds board. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116203: Change nand Makefile to use CONFIG_MXC_NAND.Terry Lv2009-09-10-5/+8
| | | | | | Change nand Makefile to use CONFIG_MXC_NAND. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116083: Recovery mode support for Android on mx51.Terry Lv2009-09-10-13/+1695
| | | | | | Recovery mode support for Android on mx51. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116140 MX51 3stack low level does not set M4IF correctlyXinyu Chen2009-09-10-2/+11
| | | | | | Copy babbage settings to 3stack Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
* ENGR00115592: Replace whitespaces with tabs in MakefileTerry Lv2009-09-10-1/+1
| | | | | | Replace whitespaces with tabs in Makefile. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00115046: Add new MMC config option for mx35.Terry Lv2009-09-10-28/+257
| | | | | | Add new MMC config option for mx35. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00115333: Enable cp command for MMCTerry Lv2009-09-10-101/+103
| | | | | | Enable cp command for MMC. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113941 MX233: Make UBOOT v2009.01 work on EVK boardLionel Xu2009-09-10-1/+2720
| | | | | | | | Porting MX233 UBOOT from 1.3.3 to V2009.01. Clear old cfg macro, such as CFG_HZ. Change MAC address getting source from initial configuration to On-Chip OTP. Signed-off-by: Lionel Xu <r63889@freescale.com>
* ENGR00114746: Disable flash header for mx35 nand bootTerry Lv2009-09-10-4/+7
| | | | | | Disable flash header for mx35 nand boot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114367: Add BABBAGE machine id, BBG2.5 rev id for rootfs init.Terry Lv2009-09-10-3/+19
| | | | | | Update mach-types for BBG board. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114393: Support Atmel AT45DB321D SPI NOR flash.Terry Lv2009-09-10-2/+551
| | | | | | Support Atmel AT45DB321D SPI NOR flash. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114178 Support MMC/SD boot and enable dhcp in uboot on MX25Sammy2009-09-10-2/+355
| | | | | | | | 1. Support MMC/SD boot in uboot, however, it is disabled default and user needs to enable manually by changing mx25_3stack.h; 2. Enable dhcp for network. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00114201: Add MMC configs to mx35 3stack config file.Terry Lv2009-09-10-86/+81
| | | | | | Add MMC configs to mx35 3stack config file. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114236 Disable NAND driver interleave mode supportJason2009-09-10-23/+13
| | | | | | Disable NAND driver interleave mode support Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00114233 Add support for programming ubifs image on nand flashJason2009-09-10-0/+67
| | | | | | Add support for programming ubifs image on nand flash Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00111465: Remove Watchdog disable codes in MX51 uboot.Terry Lv2009-09-10-2/+0
| | | | | | Remove Watchdog disable codes in MX51 uboot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113611: Add FEC support for BBG2.Terry Lv2009-09-10-61/+289
| | | | | | Add FEC support for BBG2. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113475: Add auto-complete and platform prompt for each platform.Terry Lv2009-09-10-4/+8
| | | | | | Add auto-complete and platform prompt for each platform. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113439: BBG2, enable SPI NOR and MMC in one image.Terry Lv2009-09-10-19/+20
| | | | | | BBG2, enable SPI NOR and MMC in one image. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113148 Add build option to uboot for different media typeJason2009-09-10-9/+18
| | | | | | | 1. Add build option to uboot for different media type 2. fix the spi-nor link error Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00112845 spi nor boot and pmic support for BBG2.Terry Lv2009-09-10-5/+1295
| | | | | | spi nor boot support for BBG2. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00112273 BBG2: MMC boot support.Terry Lv2009-09-10-61/+4234
| | | | | | BBG2: MMC boot support. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00112298 BBG2: Basic boot.r653882009-09-10-0/+1103
| | | | | | Basic boot on BBG2 board. Signed-off-by: r65388 <r65388@freescale.com>
* ENGR00110586 MX31: Resolve Copyright issue for mx31 filesr653882009-09-10-0/+5
| | | | | | Add freescale copyright. Signed-off-by: r65388 <r65388@freescale.com>
* ENGR00109851 Add nand driver for MX51 ubootJason2009-09-10-344/+548
| | | | | | Add nand driver for MX51 uboot Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00107840 Add U-Boot for MX25 PDK boardAlan Carvalho de Assis2009-09-10-0/+677
| | | | | | | These patches add functional support to iMX25PDK. Currently only the internal FEC is supported. Signed-off-by: Alan Carvalho de Assis <alan.assis@freescale.com>
* ENGR00108673 Add i.MX25 core to U-BootAlan Carvalho de Assis2009-09-10-62/+1965
| | | | | | This patch add support on U-Boot to i.MX25 processor. Signed-off-by: Alan Carvalho de Assis <alan.assis@freescale.com>
* ENGR00108473 Porting i.MX51 3stack TO2 support to V2009.01Fred Fan2009-09-10-0/+3862
| | | | | | | Support i.MX51 TO2.0 3stack board. And enable LAN9217 support. NAND is not supported in this patch. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00107886 Porting MX31, MX35 3stack to u-boot V2009.01Fred Fan2009-09-10-129/+144
| | | | | | Modify and Verfiy MX31 & MX35 3stack according to the changes in V2009.01 Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00104583 MX35 can not boot up kernelFred Fan2009-09-10-9/+30
| | | | | | | | uboot can not boot kernel. There are no more messages excepts uncompression message. The root cause is wrong romfile version offset. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00103914 Support i.MX35 TO2 and 3stack board version 2Fred Fan2009-09-09-23/+125
| | | | | | | | | 1. Check Soc version 2. Check Board version based on TO2 pmic chip version. 3. Based on soc version, skips To1 workaround code 4. based on board version, enables FEC power and select pin mux. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00102788 Remove CONFIG_NAND_BOOT on i.MX31 3stackFred Fan2009-09-09-4/+1
| | | | | | | | | 1. Change NAND driver Makefile to bulild individual nand driver on i.MX31 and i.MX35. 2. Remove CONFIG_NAND_BOOT to common boot code which supports boot from nand and nor. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00102776 Support boot from NAND on i.mx35 3stack TO1Fred Fan2009-09-09-22/+334
| | | | | | | | | 1. Support boot from NAND Changes link script to separate initial code to multiple sections. 2. One binary support boot from NOR and NAND Changes common file start.S to support multiple sections. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00099697 Add nand driver for mx35Fred Fan2009-09-09-14/+1380
| | | | | | Add nand driver for mx35 Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00094619 Support i.MX31 3stack boardFred Fan2009-09-09-30/+1925
| | | | | | | | Support boot from NAND Flash Add driver for i.MX31 NFC Upgate U-Boot to support NAND boot Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
* ENGR00094618 Update .gitignore configure fileFred Fan2009-09-09-0/+1
| | | | | | Update .gitignore configure file to ignore vim swap and ctags file Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
* ENGR00081147 Support i.MX35 3stack boardFred Fan2009-09-09-63/+4518
| | | | | | | | Support boot from NOR flash Support Multiple ethernet:LAN9217 and FEC Support upgrade u-boot Signed-off-by: Fred Fan <r01011@freescale.com>
* Prepare 2009.08v2009.08Wolfgang Denk2009-08-31-1/+187
| | | | | | Update CHANGELOG Signed-off-by: Wolfgang Denk <wd@denx.de>
* Add common code dir for Matrix Vision boards.Andre Schwarz2009-08-31-0/+206
| | | | | | | | | | | This fixes current build failure. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> mvblm7.c: fix warning: implicit declaration of function 'mv_reset_environment' Signed-off-by: Wolfgang Denk <wd@denx.de>
* bugfix CONFIG_SYS_CONSOLE_INFO_QUIETDavid Brownell2009-08-30-1/+1
| | | | | | | | | The "console: unify printing current devices" patch goofed: CONFIG_SYS_CONSOLE_INFO_QUIET is supposed to *REMOVE* boot time noise, not add it. Said patch changed the #ifndefs to #ifdef; this one restores them to the proper sense. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Use common code for Matrix Vision boardsAndré Schwarz2009-08-28-175/+77
| | | | | | | Clean up existing boards (mvBC-P/MPC5200 and mvBL-M7/MPC8343) by using common code. Signed-off-by: André Schwarz <andre.schwarz@matrix-vision.de>
* mpc83xx: mpc8349itx - accommodate larger kernel sizes & unzero the bootdelayKim Phillips2009-08-26-3/+3
| | | | | | | | | | apparently the ITX was missed last round. Also make bootdelay consistent with other boards, so as to give on the opportunity to fix mistakenly set bootcmd without having checked for an bootdelay zero setting first. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: match dtb filename references to their dts equivalents in the linux ↵Kim Phillips2009-08-26-2/+2
| | | | | | kernel Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2009-08-25-2/+2
|\
| * ppc4xx: Fix ECC Correction bug with SMC ordering for NDFC driverFeng Kan2009-08-25-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix ECC Correction bug where the byte offset location were double flipped causing correction routine to toggle the wrong byte location in the ECC segment. The ndfc_calculate_ecc routine change the order of getting the ECC code. /* The NDFC uses Smart Media (SMC) bytes order */ ecc_code[0] = p[2]; ecc_code[1] = p[1]; ecc_code[2] = p[3]; But in the Correction algorithm when calculating the byte offset location, the s1 is used as the upper part of the address. Which again reverse the order making the final byte offset address location incorrect. byteoffs = (s1 << 0) & 0x80; . . byteoffs |= (s0 >> 4) & 0x08; The order is change to read it in straight and let the correction function to revert it to SMC order. Signed-off-by: Feng Kan <fkan@amcc.com> Acked-by: Victor Gallardo <vgallardo@amcc.com> Acked-by: Prodyut Hazarika <phazarika@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2009-08-25-11/+11
|\ \
| * | Blackfin: fix typos in gpio commentsMike Frysinger2009-08-23-9/+9
| | | | | | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | Blackfin: cm-bf527/cm-bf537: increase flash sectorsHarald Krapfenbauer2009-08-23-2/+2
| |/ | | | | | | | | | | | | | | Newer revisions of these boards have slightly larger flashes, so increase the configured number of sectors so that U-Boot works on all revisions. Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | include/s3c24x0.h: fix S3C24X0_SPI_CHANNEL declarationWolfgang Denk2009-08-25-8/+14
|/ | | | | | | The SPI controller on the S3C24X0 has 8 bit registers, not 32 bit. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
generated by cgit v1.1 at 2024-11-19 23:16:46 +0000