summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* p2041rdb: fix serdes clock mapShaohui Xie2011-12-06-10/+15
| | | | | | | | | | | | | | | | | | Description of SerDes clock Bank2 setting in p2041 hardware specification is wrong, the clock map which based on it is wrong either, so fix the serdes clock map. wrong setting of SERDES Reference Clocks Bank2: SW2[5:6] = ON OFF =>100MHz for PCI mode SW2[5:6] = OFF ON =>125MHz for SGMII mode right setting of SERDES Reference Clocks Bank2: SW2[5:6] = OFF OFF =>100MHz for PCI mode SW2[5:6] = OFF ON =>125MHz for SGMII mode SW2[5:6] = ON OFF =>156.25MHZ Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk2011-12-05-15/+9
|\ | | | | | | | | | | | | | | | | | | * 'agust@denx.de' of git://git.denx.de/u-boot-staging: Makefile: add tools/mkenvimage to target 'clean' mv_common.c: get rid of 'defined but not used' warning m68k: fix ambiguous bit testing sparc: fix unknown escape sequence warnings sparc: fix unused variable warnings sf: fix erase debug output
| * Makefile: add tools/mkenvimage to target 'clean'Horst Kronstorfer2011-12-05-1/+1
| | | | | | | | | | Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
| * mv_common.c: get rid of 'defined but not used' warningMichael Jones2011-12-05-1/+1
| | | | | | | | | | | | | | | | | | When CONFIG_ENV_IS_NOWHERE, got following warning: mv_common.c:32:14: warning: 'entries_to_keep' defined but not used. Get rid of this warning. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
| * m68k: fix ambiguous bit testingMike Frysinger2011-12-05-1/+1
| | | | | | | | | | | | | | | | | | | | Building for some m68k boards results in the warning: cpu_init.c: In function 'cpu_init_f': cpu_init.c:287: warning: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sparc: fix unknown escape sequence warningsMike Frysinger2011-12-05-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I don't know what exactly the code was going for, but the object code is the same before/after my change, and in looking at the env strings, this seems to be OK. Otherwise gcc warns: cc1: warning: unknown escape sequence: '\$' cc1: warning: unknown escape sequence: '\)' cc1: warning: unknown escape sequence: '\040' cc1: warning: unknown escape sequence: '\$' cc1: warning: unknown escape sequence: '\)' Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sparc: fix unused variable warningsMike Frysinger2011-12-05-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the build warnings: board.c: In function 'board_init_f': board.c:179:8: warning: unused variable 'e' board.c:178:6: warning: unused variable 'i' board.c:173:13: warning: unused variable 'cmdtp' bootm.c: In function 'do_bootm_linux': bootm.c:101:28: warning: unused variable 'kernend' bootm.c:101:15: warning: unused variable 'initrd_addr' bootm.c:100:26: warning: unused variable 'checksum' bootm.c:100:21: warning: unused variable 'len' bootm.c:100:15: warning: unused variable 'data' Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: fix erase debug outputVadim Bendebury2011-12-05-2/+1
| | | | | | | | | | | | | | | | We want to show the length, so multiplying by sector size makes no sense. This is a hold over from the erase code before the big refactor. Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | common/menu.c: Fix build warningAnatolij Gustschin2011-12-05-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix: menu.c: In function 'menu_item_print': menu.c:91: warning: passing argument 1 of 'putc' makes integer from pointer without a cast Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Marek Vasut <marek.vasut@gmail.com>
* | board/amcc/taihu/flash.c: Fix GCC 4.6 build warningsWolfgang Denk2011-12-05-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: flash.c: In function 'flash_erase_1': flash.c:514:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable] flash.c: In function 'flash_erase_2': flash.c:956:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de>
* | board/amcc/yucca/flash.c: Fix GCC 4.6 build warningsWolfgang Denk2011-12-05-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: flash.c: In function 'flash_erase_1': flash.c:425:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable] flash.c: In function 'flash_erase_2': flash.c:834:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de>
* | board/amcc/common/flash.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-05-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | Fix: In file included from flash.c:45:0: ../common/flash.c: In function 'flash_erase': ../common/flash.c:399:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de>
* | pci_ftpci100: Implementation FTPCI100 PCI driverGavin Guo2011-12-05-0/+425
| | | | | | | | | | | | | | | | | | FTPCI100 is a SoC PCI componenet of Faraday company. Which is usually built into SoC chips for providing embedded PCI functions. Signed-off-by: Gavin Guo <gavinguo@andestech.com> Signed-off-by: Macpaul Lin <macpaul@andestech.com>
* | phy: Add support for SMSC LAN87xx PHYsNobuhiro Iwamatsu2011-12-05-0/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the SMSC LAN87xx PHYs. Following PHYs can be used by set CONFIG_PHY_SMSC to config. - SMSC LAN8700 - SMSC LAN8710/LAN8720 - SMSC LAN8710/LAN8720 A setup of PHY was copied from linux kenrel. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Fixed white space errors; modified commit message a bit. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Fix tsize warning in tools/aisimage.cSimon Glass2011-12-05-3/+3
| | | | | | | | | | | | | | | | | | This fixes the following warning with gcc 4.4.3. aisimage.c: In function 'aisimage_generate': aisimage.c:365: warning: 'tsize' may be used uninitialized in this function Signed-off-by: Simon Glass <sjg@chromium.org>
* | drivers/net/mvgbe.c: Fix GCC 4.6 warningsAnatolij Gustschin2011-12-05-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: mvgbe.c: In function 'mvgbe_send': mvgbe.c:555:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] mvgbe.c: In function 'mvgbe_recv': mvgbe.c:640:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
* | serial: constify serial_assign()Gerlando Falauto2011-12-05-2/+2
| | | | | | | | | | Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* | serial: cosmetic checkpatch complianceGerlando Falauto2011-12-05-35/+35
| | | | | | | | | | Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* | disk: part_efi: fix regression due to incorrect buffer usageStephen Warren2011-12-05-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit deb5ca80275e8cfa74d5680b41204e08a095eca5 "disk: part_efi: fix **pgpt_pte == NULL" modified the code to pass "&gpt_head" to is_gpt_valid() rather than the previous "gpt_head". However, gpt_head is a pointer to the buffer, not the actual buffer, since it was allocated using ALLOC_CACHE_ALIGN_BUFFER. This caused is_gpt_valid() to read the disk block onto the stack rather than into the buffer, causing the code to fail. This change reverts that portion of the commit mentioned above. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Doug Anderson <dianders@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Anton Staaf <robotboy@chromium.org>
* | miiphy: Note that miiphy_* API is deprecatedAndy Fleming2011-12-05-0/+21
| | | | | | | | | | | | | | We want to move everything to phylib, and we definitely don't want new drivers using the miiphy infrastructure. Signed-off-by: Andy Fleming <afleming@freescale.com>
* | Phy/Marvell: Rewrite the MV88E1111 phy config function based on kernel codeZang Roy-R619112011-12-05-6/+107
| | | | | | | | | | | | | | | | | | | | The original m88e1111s_config() does not do the SGMII mode initialization and is buggy. Rewrite the function according to 3.0.6 kernel function m88e1111_config_init() in drivers/net/phy/marvell.c Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org>
* | Merge branch 'marek.vasut@gmail.com' of git://git.denx.de/u-boot-stagingWolfgang Denk2011-12-05-7/+2
|\ \ | | | | | | | | | | | | | | | | | | * 'marek.vasut@gmail.com' of git://git.denx.de/u-boot-staging: tools/os_support: add OS X Lion support board/esd/dasa_sim/flash.c: Fix GCC 4.6 warning board/esd/common/xilinx_jtag_micro.c: Fix GCC 4.6 warning
| * | tools/os_support: add OS X Lion supportAndreas Bießmann2011-12-02-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OS X Lion's c-library implements getline(), therefore prevent including the old helper implementation for __DARWIN_C_LEVEL < 200809L. Without this patch following error occours: ---8<--- In file included from os_support.h:32, from img2srec.c:55: getline.h:1: error: conflicting types for ‘getline’ /usr/include/stdio.h:449: error: previous declaration of ‘getline’ was here --->8--- Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | board/esd/dasa_sim/flash.c: Fix GCC 4.6 warningMatthias Fuchs2011-12-02-3/+0
| | | | | | | | | | | | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
| * | board/esd/common/xilinx_jtag_micro.c: Fix GCC 4.6 warningMatthias Fuchs2011-12-02-2/+0
| |/ | | | | | | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
* | sh: Add support for ecovec boardNobuhiro Iwamatsu2011-12-02-0/+575
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The ecovec board has SH7724, 256MB DDR2-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - 256MB DDR2-SDRAM - USB - I2C - Ethernet Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: Add support Renesas SH7724Nobuhiro Iwamatsu2011-12-02-0/+236
| | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: Add updating method of SPI ROM to README of sh7757lcrNobuhiro Iwamatsu2011-12-02-0/+14
| | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: espt: change config for new sh_eth driverYoshihiro Shimoda2011-12-02-0/+4
| | | | | | | | | | | | | | The new sh_eth driver uses the phy driver. So, this patch enables it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh7763rdp: change config for new sh_eth driverYoshihiro Shimoda2011-12-02-0/+4
| | | | | | | | | | | | | | The new sh_eth driver uses the phy driver. So, this patch enables it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: avoid multiple definition errors with cache funcsMike Frysinger2011-12-02-21/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | Recent builds for SH4 boards fail with a lot of errors like: cmd_mem.o: In function 'dcache_invalid_range': include/asm/cache.h:25: multiple definition of 'dcache_invalid_range' include/asm/cache.h:25: first defined here This is due to the funcs being defined in the header, but not static or inline or extern. So move them to the sh4-specific cache.c file. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: Add a flag which controls the DDR ECC mode of sh7757lcrNobuhiro Iwamatsu2011-12-02-1/+3
| | | | | | | | | | | | | | | | | | | | | | When DDR-ECC is effective, the physical memory which can be used reduces this boardby half. However, this mode can chenge to disable. When it was disabled, user can use 512 MB of physical memory. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: "Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com> Acked-by: "Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: Add ashrsi3 libgcc functionPhil Edworthy2011-12-02-0/+186
| | | | | | | | | | | | | | | | | | | | | | The ashrsi3 function is used by some commands that aren't in SH2A default configs (e.g. JFFS2). The ashrsi3.S file has been copied from Linux. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: only add -mno-fdpic if the compiler supports itMike Frysinger2011-12-02-1/+2
| | | | | | | | | | | | | | | | | | Not all SuperH toolchains support -mno-fdpic. Chances are good that if the flag doesn't work, it isn't defaulting to the FDPIC ABI, so the flag isn't needed. So only add it if it is actually supported. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh7757lcr: change config for new sh_eth driverYoshihiro Shimoda2011-12-02-0/+4
| | | | | | | | | | | | | | The new sh_eth driver uses the phy driver. So, this patch enables it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | net: sh_eth: use miiphybb instead of own mii functionsYoshihiro Shimoda2011-12-02-248/+104
|/ | | | | | | | | | The sh_eth driver had an own mii functions. However the function didn't support the gigabit PHY. The U-Boot has the general phy driver and miiphybb driver, and they already support it. So this patch removes the own functions and uses the phy driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/masterWolfgang Denk2011-12-02-1936/+6602
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of ssh://gemini/home/wd/git/u-boot/master: board/emk/top860/top860.c: Fix GCC 4.6 build warning board/sbc405/strataflash.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc86xx/cpu.c: Fix GCC 4.6 build warning board/freescale/mpc8610hpcd/mpc8610hpcd.c: Fix GCC 4.6 build warning board/mpl/common/flash.c: Fix GCC 4.6 build warning post/board/lwmon5/gdc.c: Fix GCC 4.6 build warning drivers/usb/host/sl811-hcd.c: Fix GCC 4.6 build warning board/sandburst/common/flash.c: Fix GCC 4.6 build warning DB64460: Fix GCC 4.6 build warnings DB64360: Fix GCC 4.6 build warnings board/cray/L1/flash.c: Fix GCC 4.6 build warning drivers/block/sata_dwc.c: Fix GCC 4.6 build warning board/amirix/ap1000/flash.c: Fix GCC 4.6 build warning alpr board: Fix GCC 4.6 build warnings image: Don't detect XIP images as overlapping. image: Implement IH_TYPE_KERNEL_NOLOAD ppc4xx: Add Io64 board support ppc4xx: fix PMC440 painit command ppc4xx: remove invalid access to PCI_BRDGOPT2 register ppc4xx: use CONFIG_PCI_BOOTDELAY instead of private implementation mpc85xx: support for Freescale COM Express P2020 arch/powerpc/cpu/mpc8xxx/ddr/interactive.c: Fix GCC 4.6 build warning mpc85xx: support board-specific reset function powerpc/85xx: verify the localbus device tree address before booting the OS mpc8xxx: update module_type values from JEDEC DDR3 SPD Specification powerpc/p3060qds: Add board related support for P3060QDS platform powerpc/85xx: clean up and document the QE/FMAN microcode macros powerpc/85xx: always implement the work-around for Erratum SATA_A001 powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h powerpc/85xx: Add workaround for erratum A-003474 powerpc/85xx: fixup flexcan device tree clock-frequency powerpc/85xx: Add workaround for erratum CPU-A003999 x86: Fix some bugs in the i8402 driver when no controller is present x86: Make the i8042 driver checkpatch clean x86: Wrap small helper functions from libgcc to avoid an ABI mismatch x86: Import the glibc memset implementation x86: Fix a few recently added bugs x86: Don't relocate symbols which point to things that aren't relocated x86: Fix how the location of the realmode and bios blobs are calculated x86: Misc cleanups x86: Misc PCI touchups x86: Ensure IDT and GDT remain 16-byte aligned post relocation x86: Provide more configuration granularity x86: Add multiboot header sc520: Create arch asm-offsets x86: Punt cold- and warm-boot flags cosmetic: checkpatch cleanup of board/eNET/*.c cosmetic: checkpatch cleanup of arch/x86/lib/*.c cosmetic: checkpatch cleanup of arch/x86/cpu/sc520/*.c cosmetic: checkpatch cleanup of arch/x86/cpu/*.c x86: Call hang() on unrecoverable exception menu.c: use puts() instead of printf() where possible MAKEALL: drop obsolete mx31pdk_nand target dataflash: fix parameters order in write_dataflash() hawkboard: Replace HAWKBOARD_KICK{0, 1}_UNLOCK defines davinci_sonata: define CONFIG_MACH_TYPE for davinci_sonata board davinci_schmoogie: define CONFIG_MACH_TYPE for davinci_schmoogie board arm: a320evb: define mach-type in board config file OMAP3: Use sdelay from arch/arm/cpu/armv7/syslib.c instead of cloning that. Fix Stelian's email address DIU: 1080P and 720P support CFB: Fix font rendering on mx5 framebuffer
| * board/emk/top860/top860.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-02-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix: top860.c: In function 'initdram': top860.c:90:11: warning: variable 'j' set but not used [-Wunused-but-set-variable] Note: No attempts were made to convert this file completely to using I/O accessors. This is left as an exercise for the board maintainer. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
| * board/sbc405/strataflash.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-02-3/+0
| | | | | | | | | | | | | | | | | | | | Fix: strataflash.c: In function 'flash_write_cfiword': strataflash.c:673:11: warning: variable 'ctladdr' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Marek Vasut <marek.vasut@gmail.com>
| * arch/powerpc/cpu/mpc86xx/cpu.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-02-3/+0
| | | | | | | | | | | | | | | | | | | | | | Fix: cpu.c: In function 'checkcpu': cpu.c:51:7: warning: variable 'ver' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org>
| * board/freescale/mpc8610hpcd/mpc8610hpcd.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-02-2/+1
| | | | | | | | | | | | | | | | | | | | | | Fix: mpc8610hpcd.c: In function 'pci_init_board': mpc8610hpcd.c:238:15: warning: variable 'pordevsr' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org>
| * board/mpl/common/flash.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-02-2/+1
| | | | | | | | | | | | | | | | | | | | | | Fix: ../common/flash.c: In function 'flash_init': ../common/flash.c:160:16: warning: variable 'size_b1' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Denis Peter <d.peter@mpl.ch> Acked-by: Marek Vasut <marek.vasut@gmail.com>
| * post/board/lwmon5/gdc.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-02-2/+1
| | | | | | | | | | | | | | | | | | | | | | Fix: gdc.c: In function 'gdc_test_reg_one': gdc.c:66:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de>
| * drivers/usb/host/sl811-hcd.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-02-7/+5
| | | | | | | | | | | | | | | | | | | | Fix: sl811-hcd.c: In function 'sl811_rh_submit_urb': sl811-hcd.c:556:8: warning: variable 'wIndex' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Remy Bohmer <linux@bohmer.net>
| * board/sandburst/common/flash.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-02-4/+1
| | | | | | | | | | | | | | | | | | | | | | Fix: ../common/flash.c: In function 'flash_erase': ../common/flash.c:307:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Travis Sawyer <travis.sawyer@sandburst.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
| * DB64460: Fix GCC 4.6 build warningsWolfgang Denk2011-12-02-296/+255
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: db64460.c: In function 'debug_led': db64460.c:413:6: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_real_open': mv_eth.c:423:6: warning: variable 'port_status' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_stop': mv_eth.c:641:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_xmit': mv_eth.c:717:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_receive': mv_eth.c:802:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_get_stats': mv_eth.c:901:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_update_stat': mv_eth.c:929:24: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] mv_eth.c:928:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64460_eth_print_stat': mv_eth.c:1010:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'eth_clear_mib_counters': mv_eth.c:2067:15: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'check_dimm': sdram_init.c:289:50: warning: variable 'trrd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:289:37: warning: variable 'tras_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:289:24: warning: variable 'trcd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:289:8: warning: variable 'trp_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:279:34: warning: variable 'devicesForErrCheck' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'setup_sdram': sdram_init.c:1255:13: warning: variable 'check' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'initdram': sdram_init.c:1744:25: warning: variable 'check' set but not used [-Wunused-but-set-variable] sdram_init.c:1742:14: warning: variable 's1' set but not used [-Wunused-but-set-variable] sdram_init.c:1742:6: warning: variable 's0' set but not used [-Wunused-but-set-variable] Note: no attempt was make to clean up the mess coding style and other issues in sdram_init.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * DB64360: Fix GCC 4.6 build warningsWolfgang Denk2011-12-02-299/+254
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: db64360.c: In function 'debug_led': db64360.c:413:6: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_real_open': mv_eth.c:424:6: warning: variable 'port_status' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_stop': mv_eth.c:642:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_xmit': mv_eth.c:718:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_receive': mv_eth.c:803:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_get_stats': mv_eth.c:902:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_update_stat': mv_eth.c:930:24: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] mv_eth.c:929:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_print_stat': mv_eth.c:1011:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'eth_clear_mib_counters': mv_eth.c:2068:15: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'check_dimm': sdram_init.c:289:50: warning: variable 'trrd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:289:37: warning: variable 'tras_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:289:24: warning: variable 'trcd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:289:8: warning: variable 'trp_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:279:34: warning: variable 'devicesForErrCheck' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'setup_sdram': sdram_init.c:1256:13: warning: variable 'check' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'initdram': sdram_init.c:1735:25: warning: variable 'check' set but not used [-Wunused-but-set-variable] sdram_init.c:1733:14: warning: variable 's1' set but not used [-Wunused-but-set-variable] sdram_init.c:1733:6: warning: variable 's0' set but not used [-Wunused-but-set-variable] Note: no attempt was make to clean up the mess coding style and other issues in sdram_init.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * board/cray/L1/flash.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-02-14/+11
| | | | | | | | | | | | | | | | | | | | Fix: flash.c: In function 'flash_erase': flash.c:276:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Marek Vasut <marek.vasut@gmail.com>
| * drivers/block/sata_dwc.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-02-5/+1
| | | | | | | | | | | | | | | | | | | | Fix: sata_dwc.c: In function 'scan_sata': sata_dwc.c:535:38: warning: variable 'udma_mask' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kazuaki Ichinohe <kazuichi@fsi.co.jp>
| * board/amirix/ap1000/flash.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-02-3/+0
| | | | | | | | | | | | | | | | | | | | Fix: flash.c: In function 'flash_write_cfiword': flash.c:778:11: warning: variable 'ctladdr' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Marek Vasut <marek.vasut@gmail.com>
generated by cgit v1.1 at 2024-12-24 00:39:18 +0000