summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field MnemonicsGrant Erickson2008-07-11-0/+52
| | | | | | | | | Add additional DDR2 SDRAM memory controller DCR mneomnics, condition revision ID DCR based on 405EX, and add field mnemonics for bus error status and ECC error status registers. Signed-off-by: Grant Erickson <gerickson@nuovations.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r)Grant Erickson2008-07-11-0/+36
| | | | | | | This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register. Signed-off-by: Grant Erickson <gerickson@nuovations.com> Signed-off-by: Stefan Roese <sr@denx.de>
* PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)Grant Erickson2008-07-11-0/+4
| | | | | | | | | | | | | While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in the 405EX(r), SDRAM_MCSTAT has a different DCR value. Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF which causes SDRAM initialization to periodically fail since it can prematurely indicate SDRAM ready status. Signed-off-by: Grant Erickson <gerickson@nuovations.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.Feng Kan2008-07-11-0/+865
| | | | | | | | | | Add AMCC Redwood reference board that uses the latest PPC 464 CPU processor combined with a rich mix of peripheral controllers. The board will support PCIe, mutiple Gig ethernet ports, advanced hardware RAID assistance and IEEE 1588. Signed-off-by: Feng Kan <fkan@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add initial 460SX reference board (redwood) config file and defines.Feng Kan2008-07-11-9/+207
| | | | | Signed-off-by: Feng Kan <fkan@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory.Feng Kan2008-07-11-4/+54
| | | | | Signed-off-by: Feng Kan <fkan@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* Fix some more print() format errors.Wolfgang Denk2008-07-11-63/+73
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* silence misc printf formatting compiler warningsKim Phillips2008-07-10-16/+16
| | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc512xWolfgang Denk2008-07-10-65/+389
|\
| * Configuration changes for ADS5121 Rev 3Martha Marx2008-07-10-16/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ADS5121 Rev 3 board is now the default config config targets are now ads5121_config Rev 3 board with PCI M41T62 on board RTC 512MB DRAM ads5121_rev2_config Rev 2 board with No PCI 256MB DRAM Signed-off-by: Martha Marx <mmarx@silicontkx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: John Rigby <jrigby@freescale.com>
| * Consolidate ADS5121 IO Pin configurationMartha Marx2008-07-10-49/+322
| | | | | | | | | | | | | | | | | | | | | | Consolidate ADS5121 IO Pin configuration to one file board/ads5121/iopin.c. Remove pin config from cpu/mpc512x/fec.c Signed-off-by: Martha Marx <mmarx@silicontkx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: John Rigby <jrigby@freescale.com>
| * Fix "usb part" commandChristian Eggers2008-07-10-4/+15
| | | | | | | | | | | | | | | | Only print partition for selected device if user supplied the <dev> arg with the "usb part [dev]" command. Signed-off-by: Christian Eggers <ceggers@gmx.de> Acked-by: Markus Klotzbuecher <mk@denx.de>
| * fix USB devices with multiple configurationsHarald Welte2008-07-10-15/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bugs in usbdcore*.c related to the use of devices with multiple configurations. The original code made mistakes about the meaning of configuration value and configuration index, and the resulting off-by-one errors resulted in: * SET_CONFIGURATION always selected the first configuration, no matter what wValue is being passed. * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first configuration (index 0). Signed-off-by: Harald Welte <laforge@openmoko.org> Acked-by: Markus Klotzbuecher <mk@denx.de>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xxWolfgang Denk2008-07-10-5/+40
|\ \
| * \ Merge commit 'wd/master'Jon Loeliger2008-07-10-1385/+8989
| |\ \
| * | | Feed the watchdog in u-boot for 8610 board.Jason Jin2008-07-07-2/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The watchdog on 8610 board is enabled by setting sw[6] to on. Once enabled, the watchdog can not be disabled by software. So feed the dog in u-boot is necessary for normal operation. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
| * | | MPC8610HPCD: Report board id, board version and fpga version.Kumar Gala2008-06-19-1/+4
| | | | | | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | MPC8641HPCN: Report board id, board version and fpga version.Kumar Gala2008-06-19-2/+4
| | | | | | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | USB: shutdown USB before bootingMarkus Klotzbücher2008-07-10-0/+18
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a potentially serious issue related to USB which was discouvered by Martin Krause <martin.krause@tqs.de> and fixed for ARM920T. Martin wrote: Turn off USB to prevent the host controller from writing to the SDRAM while Linux is booting. This could happen, because the HCCA (Host Controller Communication Area) lies within the SDRAM and the host controller writes continously to this area (as busmaster!), for example to increase the HccaFrameNumber variable, which happens every 1 ms. This is a slightly modified version of the patch in order to shutdown USB when booting on all architectures. Signed-off-by: Markus Klotzbuecher <mk@denx.de>
* | | Merge branch 'master' of ssh://10.10.0.7/home/wd/git/u-boot/masterWolfgang Denk2008-07-10-19/+21
|\ \ \ | |_|/ |/| |
| * | Fix "usb part" commandChristian Eggers2008-07-10-4/+15
| | | | | | | | | | | | | | | | | | | | | | | | Only print partition for selected device if user supplied the <dev> arg with the "usb part [dev]" command. Signed-off-by: Christian Eggers <ceggers@gmx.de> Acked-by: Markus Klotzbuecher <mk@denx.de>
| * | fix USB devices with multiple configurationsHarald Welte2008-07-10-15/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bugs in usbdcore*.c related to the use of devices with multiple configurations. The original code made mistakes about the meaning of configuration value and configuration index, and the resulting off-by-one errors resulted in: * SET_CONFIGURATION always selected the first configuration, no matter what wValue is being passed. * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first configuration (index 0). Signed-off-by: Harald Welte <laforge@openmoko.org> Acked-by: Markus Klotzbuecher <mk@denx.de>
* | | Fix some more print() format errors.Wolfgang Denk2008-07-10-14/+14
|/ / | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk2008-07-10-91/+133
|\ \
| * | ppc4xx: Fix printf format warnings now visible with the updated format checkStefan Roese2008-07-10-31/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes ppc4xx related printf format warning. Those warnings are now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is really helpful. Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Enable support for > 2GB SDRAM on AMCC KatmaiStefan Roese2008-07-10-13/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM. To support such configurations, we "only" map the first 2GB via the TLB's. We need some free virtual address space for the remaining peripherals like, SoC devices, FLASH etc. Note that ECC is currently not supported on configurations with more than 2GB SDRAM. This is because we only map the first 2GB on such systems, and therefore the ECC parity byte of the remaining area can't be written. Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Remove implementation of testdram() from Korat board supportLarry Johnson2008-07-10-39/+0
| | | | | | | | | | | | | | | Signed-off-by: Larry Johnson <lrj@acm.org> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Update and add FDT to Korat board supportLarry Johnson2008-07-10-5/+47
| | | | | | | | | | | | | | | Signed-off-by: Larry Johnson <lrj@acm.org> Signed-off-by: Stefan Roese <sr@denx.de>
| * | Merge branch 'master' of /home/stefan/git/u-boot/u-bootStefan Roese2008-07-10-870/+2785
| |\ \
| * \ \ Merge branch 'master' of /home/stefan/git/u-boot/u-bootStefan Roese2008-07-07-619/+6191
| |\ \ \
| * | | | ppc4xx: Fix 460EX/GT PCIe port initializationStefan Roese2008-07-01-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing this out. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | MTD/NAND: Fix printf format warning in nand codeStefan Roese2008-07-10-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes NAND related printf format warning. Those warnings are now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is really helpful. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | rtc: Fix printf format warning in m41t60.cStefan Roese2008-07-10-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | pci: Move PCI device configuration check into a separate weak functionStefan Roese2008-07-10-24/+46
| |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the check, if a device should be skipped in PCI PNP configuration into the function pci_skip_dev(). This function is defined as weak so that it can be overwritten by a platform specific one if needed. The check if the device should get printed in the PCI summary upon bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function pci_print_dev() which is also defined as weak too. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | Minor coding style cleanup; update CHANGELOGWolfgang Denk2008-07-10-2/+698
| | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | Merge branch 'master' of git://www.denx.de/git/u-boot-nand-flashWolfgang Denk2008-07-10-95/+140
|\ \ \ \
| * | | | NAND: ifdef-protect most of nand.h when using legacy NAND.Scott Wood2008-07-09-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some macros such as NAND_CTL_SETALE conflict between current and legacy NAND, being defined by the subsystem in the former case and the board config file in the latter. Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | | | NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.Marcel Ziswiler2008-07-09-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The writeenv() and readenv() calls introduced by the recently added bad block management for environment variables were missing casts therefore producing compile time warnings. While at it fixing some typo in a comment and indentation. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | | | NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.Scott Wood2008-07-09-90/+132
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is particularly problematic now that non-NAND-specific code is including <nand.h>, and thus all debugging code is being compiled regardless of whether it was requested, as reported by Scott McNutt <smcnutt@psyent.com>. Signed-off-by: Scott Wood <scottwood@freescale.com>
* | | | e1000: add support for 82545GM 64bit PCI-X copper variantPaul Gortmaker2008-07-10-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This PCI-X e1000 variant works by just adding in the correct PCI IDs in the appropriate places. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | | | SPARC: Build error fixDaniel Hellstrom2008-07-10-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378) This patch makes SPARC targets build again. It is caused by phys_addr_t and phys_size_t being defined in the wrong header file. include/lmb.h need those typedefs to build. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* | | | Many spelling fixes in README.Marcel Ziswiler2008-07-10-70/+71
| | | | | | | | | | | | | | | | Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* | | | Minor spelling fix in comment.Marcel Ziswiler2008-07-10-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* | | | Round the serial port clock divisor value returned by calc_divisor()Hugo Villeneuve2008-07-10-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Round the serial port clock divisor value returned by calc_divisor(). Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: John Roberts <john.roberts@pwav.com>
* | | | ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)Hugo Villeneuve2008-07-10-267/+342
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARM: Fix for incorrect version of patch applied when adding support for the Lyrtech SFF-SDR board. Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
* | | | Remove useless print message at apollonKyungmin Park2008-07-10-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | Remove useless print message at apollon Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* | | | Fix LMB type issuesAndy Fleming2008-07-10-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The LMB code now uses phys_addr_t and phys_size_t. Also, there were a couple of casting problems in the bootm code that called the LMB functions. Signed-off-by: Andy Fleming <afleming@freescale.com>
* | | | Fix compiler warningsKumar Gala2008-07-10-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gcc-4.3.x generates the following: bootm.c: In function 'do_bootm_linux': bootm.c:208: warning: cast from pointer to integer of different size bootm.c:215: warning: cast from pointer to integer of different size Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | Remove code duplication for setting the default environmentHarald Welte2008-07-10-29/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | common/env_common.c (default_env): new function that resets the environment to the default value common/env_common.c (env_relocate): use default_env instead of own copy common/env_nand.c (env_relocate_spec): use default_env instead of own copy include/environment.h: added default_env prototype Signed-off-by: Werner Almesberger <werner@openmoko.org> Signed-off-by: Harald Welte <laforge@openmoko.org>
* | | | mmc: Move atmel_mci driver into drivers/mmcHaavard Skinnemoen2008-07-10-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes it easier to use the driver on other platforms. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
generated by cgit v1.1 at 2024-11-16 20:53:24 +0000