diff options
Diffstat (limited to 'test')
| -rw-r--r-- | test/dm/Makefile | 1 | ||||
| -rw-r--r-- | test/dm/i2c.c | 216 | ||||
| -rw-r--r-- | test/dm/test.dts | 17 |
3 files changed, 234 insertions, 0 deletions
diff --git a/test/dm/Makefile b/test/dm/Makefile index 75d3d41..612aa95 100644 --- a/test/dm/Makefile +++ b/test/dm/Makefile @@ -20,4 +20,5 @@ ifneq ($(CONFIG_SANDBOX),) obj-$(CONFIG_DM_GPIO) += gpio.o obj-$(CONFIG_DM_SPI) += spi.o obj-$(CONFIG_DM_SPI_FLASH) += sf.o +obj-$(CONFIG_DM_I2C) += i2c.o endif diff --git a/test/dm/i2c.c b/test/dm/i2c.c new file mode 100644 index 0000000..a53e28d --- /dev/null +++ b/test/dm/i2c.c @@ -0,0 +1,216 @@ +/* + * Copyright (C) 2013 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Note: Test coverage does not include 10-bit addressing + */ + +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <i2c.h> +#include <dm/device-internal.h> +#include <dm/test.h> +#include <dm/uclass-internal.h> +#include <dm/ut.h> +#include <dm/util.h> +#include <asm/state.h> +#include <asm/test.h> + +static const int busnum; +static const int chip = 0x2c; + +/* Test that we can find buses and chips */ +static int dm_test_i2c_find(struct dm_test_state *dms) +{ + struct udevice *bus, *dev; + const int no_chip = 0x10; + + ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_I2C, busnum, + false, &bus)); + + /* + * i2c_post_bind() will bind devices to chip selects. Check this then + * remove the emulation and the slave device. + */ + ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); + ut_assertok(i2c_probe(bus, chip, 0, &dev)); + ut_asserteq(-ENODEV, i2c_probe(bus, no_chip, 0, &dev)); + ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_I2C, 1, &bus)); + + return 0; +} +DM_TEST(dm_test_i2c_find, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +static int dm_test_i2c_read_write(struct dm_test_state *dms) +{ + struct udevice *bus, *dev; + uint8_t buf[5]; + + ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); + ut_assertok(i2c_get_chip(bus, chip, &dev)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf))); + ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(memcmp(buf, "\0\0AB\0", sizeof(buf))); + + return 0; +} +DM_TEST(dm_test_i2c_read_write, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +static int dm_test_i2c_speed(struct dm_test_state *dms) +{ + struct udevice *bus, *dev; + uint8_t buf[5]; + + ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); + ut_assertok(i2c_get_chip(bus, chip, &dev)); + ut_assertok(i2c_set_bus_speed(bus, 100000)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(i2c_set_bus_speed(bus, 400000)); + ut_asserteq(400000, i2c_get_bus_speed(bus)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_asserteq(-EINVAL, i2c_write(dev, 0, buf, 5)); + + return 0; +} +DM_TEST(dm_test_i2c_speed, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +static int dm_test_i2c_offset_len(struct dm_test_state *dms) +{ + struct udevice *bus, *dev; + uint8_t buf[5]; + + ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); + ut_assertok(i2c_get_chip(bus, chip, &dev)); + ut_assertok(i2c_set_chip_offset_len(dev, 1)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + + /* This is not supported by the uclass */ + ut_asserteq(-EINVAL, i2c_set_chip_offset_len(dev, 5)); + + return 0; +} +DM_TEST(dm_test_i2c_offset_len, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +static int dm_test_i2c_probe_empty(struct dm_test_state *dms) +{ + struct udevice *bus, *dev; + + ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); + ut_assertok(i2c_probe(bus, SANDBOX_I2C_TEST_ADDR, 0, &dev)); + + return 0; +} +DM_TEST(dm_test_i2c_probe_empty, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +static int dm_test_i2c_bytewise(struct dm_test_state *dms) +{ + struct udevice *bus, *dev; + struct udevice *eeprom; + uint8_t buf[5]; + + ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); + ut_assertok(i2c_get_chip(bus, chip, &dev)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf))); + + /* Tell the EEPROM to only read/write one register at a time */ + ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom)); + ut_assertnonnull(eeprom); + sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_SINGLE_BYTE); + + /* Now we only get the first byte - the rest will be 0xff */ + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf))); + + /* If we do a separate transaction for each byte, it works */ + ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf))); + + /* This will only write A */ + ut_assertok(i2c_set_chip_flags(dev, 0)); + ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf))); + + /* Check that the B was ignored */ + ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(memcmp(buf, "\0\0A\0\0\0", sizeof(buf))); + + /* Now write it again with the new flags, it should work */ + ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS)); + ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf))); + + ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS | + DM_I2C_CHIP_RD_ADDRESS)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(memcmp(buf, "\0\0AB\0\0", sizeof(buf))); + + /* Restore defaults */ + sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_NONE); + ut_assertok(i2c_set_chip_flags(dev, 0)); + + return 0; +} +DM_TEST(dm_test_i2c_bytewise, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +static int dm_test_i2c_offset(struct dm_test_state *dms) +{ + struct udevice *eeprom; + struct udevice *dev; + uint8_t buf[5]; + + ut_assertok(i2c_get_chip_for_busnum(busnum, chip, &dev)); + + /* Do a transfer so we can find the emulator */ + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom)); + + /* Offset length 0 */ + sandbox_i2c_eeprom_set_offset_len(eeprom, 0); + ut_assertok(i2c_set_chip_offset_len(dev, 0)); + ut_assertok(i2c_write(dev, 10 /* ignored */, (uint8_t *)"AB", 2)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(memcmp(buf, "AB\0\0\0\0", sizeof(buf))); + + /* Offset length 1 */ + sandbox_i2c_eeprom_set_offset_len(eeprom, 1); + ut_assertok(i2c_set_chip_offset_len(dev, 1)); + ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2)); + ut_assertok(i2c_read(dev, 0, buf, 5)); + ut_assertok(memcmp(buf, "ABAB\0", sizeof(buf))); + + /* Offset length 2 */ + sandbox_i2c_eeprom_set_offset_len(eeprom, 2); + ut_assertok(i2c_set_chip_offset_len(dev, 2)); + ut_assertok(i2c_write(dev, 0x210, (uint8_t *)"AB", 2)); + ut_assertok(i2c_read(dev, 0x210, buf, 5)); + ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf))); + + /* Offset length 3 */ + sandbox_i2c_eeprom_set_offset_len(eeprom, 2); + ut_assertok(i2c_set_chip_offset_len(dev, 2)); + ut_assertok(i2c_write(dev, 0x410, (uint8_t *)"AB", 2)); + ut_assertok(i2c_read(dev, 0x410, buf, 5)); + ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf))); + + /* Offset length 4 */ + sandbox_i2c_eeprom_set_offset_len(eeprom, 2); + ut_assertok(i2c_set_chip_offset_len(dev, 2)); + ut_assertok(i2c_write(dev, 0x420, (uint8_t *)"AB", 2)); + ut_assertok(i2c_read(dev, 0x420, buf, 5)); + ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf))); + + /* Restore defaults */ + sandbox_i2c_eeprom_set_offset_len(eeprom, 1); + + return 0; +} +DM_TEST(dm_test_i2c_offset, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); diff --git a/test/dm/test.dts b/test/dm/test.dts index 1fba792..fb0272a 100644 --- a/test/dm/test.dts +++ b/test/dm/test.dts @@ -93,6 +93,23 @@ num-gpios = <10>; }; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + compatible = "sandbox,i2c"; + clock-frequency = <100000>; + eeprom@2c { + reg = <0x2c>; + compatible = "i2c-eeprom"; + emul { + compatible = "sandbox,i2c-eeprom"; + sandbox,filename = "i2c.bin"; + sandbox,size = <256>; + }; + }; + }; + spi@0 { #address-cells = <1>; #size-cells = <0>; |