diff options
Diffstat (limited to 'post')
-rw-r--r-- | post/sysmon.c | 54 |
1 files changed, 19 insertions, 35 deletions
diff --git a/post/sysmon.c b/post/sysmon.c index e28de90..8758ccd 100644 --- a/post/sysmon.c +++ b/post/sysmon.c @@ -115,10 +115,10 @@ struct sysmon_table_s static sysmon_table_t sysmon_table[] = { {"Board temperature", " C", &sysmon_lm87_sgn, NULL, sysmon_ccfl_disable, - 1, 1, -128, 127, 0xFF, 0x58, 0xD5, 0, 0x67, 0xC6, 0, 0x27}, + 1, 1, -128, 127, 0xFF, 0x58, 0xD5, 0, 0x6C, 0xC6, 0, 0x27}, {"Front temperature", " C", &sysmon_lm87, NULL, sysmon_ccfl_disable, - 1, 100, -27316, 8984, 0xFF, 0xA4, 0xFC, 0, 0xAE, 0xF1, 0, 0x29}, + 1, 100, -27316, 8984, 0xFF, 0xA4, 0xFC, 0, 0xB2, 0xF1, 0, 0x29}, {"+3.3V CPU logic", "V", &sysmon_lm87, NULL, NULL, 100, 1000, 0, 4386, 0xFF, 0xB6, 0xC9, 0, 0xB6, 0xC9, 0, 0x22}, @@ -150,8 +150,7 @@ int sysmon_init_f (void) reg |= 0x09; pic_write (0x60, reg); - for (l = sysmon_list; *l; l++) - { + for (l = sysmon_list; *l; l++) { (*l)->init(*l); } @@ -165,15 +164,13 @@ void sysmon_reloc (void) sysmon_t ** l; sysmon_table_t * t; - for (l = sysmon_list; *l; l++) - { + for (l = sysmon_list; *l; l++) { RELOC(*l); RELOC((*l)->init); RELOC((*l)->read); } - for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) - { + for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) { RELOC(t->exec_before); RELOC(t->exec_after); RELOC(t->sysmon); @@ -204,12 +201,10 @@ static char *sysmon_unit_value (sysmon_table_t *s, uint val) dec = s->unit_precision; - if (dec != 1) - { + if (dec != 1) { *p++ = '.'; } - for (dec /= 10; dec != 0; dec /= 10) - { + for (dec /= 10; dec != 0; dec /= 10) { *p++ = '0' + (frac / dec) % 10; } strcpy(p, s->unit_name); @@ -223,24 +218,21 @@ static void sysmon_lm87_init (sysmon_t * this) /* Detect LM87 chip */ if (i2c_read(this->chip, 0x40, 1, &val, 1) || (val & 0x80) != 0 || - i2c_read(this->chip, 0x3E, 1, &val, 1) || val != 0x02) - { + i2c_read(this->chip, 0x3E, 1, &val, 1) || val != 0x02) { printf("Error: LM87 not found at 0x%02X\n", this->chip); return; } /* Configure pins 5,6 as AIN */ val = 0x03; - if (i2c_write(this->chip, 0x16, 1, &val, 1)) - { + if (i2c_write(this->chip, 0x16, 1, &val, 1)) { printf("Error: can't write LM87 config register\n"); return; } /* Start monitoring */ val = 0x01; - if (i2c_write(this->chip, 0x40, 1, &val, 1)) - { + if (i2c_write(this->chip, 0x40, 1, &val, 1)) { printf("Error: can't write LM87 config register\n"); return; } @@ -267,8 +259,7 @@ static uint sysmon_i2c_read_sgn (sysmon_t * this, uint addr) static void sysmon_ccfl_disable (sysmon_table_t * this) { - if (!this->val_valid_alt) - { + if (!this->val_valid_alt) { sysmon_temp_invalid = 1; } } @@ -277,10 +268,9 @@ static void sysmon_ccfl_enable (sysmon_table_t * this) { ulong reg; - if (!sysmon_temp_invalid) - { + if (!sysmon_temp_invalid) { reg = pic_read (0x60); - reg |= 0x02; + reg |= 0x06; pic_write (0x60, reg); } } @@ -296,16 +286,13 @@ int sysmon_post_test (int flags) /* * The A/D conversion on the LM87 sensor takes 300 ms. */ - if (! conversion_done) - { + if (! conversion_done) { while (post_time_ms(gd->post_init_f_time) < 300) WATCHDOG_RESET (); conversion_done = 1; } - for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) - { - if (t->exec_before) - { + for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) { + if (t->exec_before) { t->exec_before(t); } @@ -313,13 +300,11 @@ int sysmon_post_test (int flags) t->val_valid = val >= t->val_min && val <= t->val_max; t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt; - if (t->exec_after) - { + if (t->exec_after) { t->exec_after(t); } - if ((!t->val_valid) || (flags & POST_MANUAL)) - { + if ((!t->val_valid) || (flags & POST_MANUAL)) { printf("%-17s = %-10s ", t->name, sysmon_unit_value(t, val)); printf("allowed range"); printf(" %-8s ..", sysmon_unit_value(t, t->val_min)); @@ -327,8 +312,7 @@ int sysmon_post_test (int flags) printf(" %s\n", t->val_valid ? "OK" : "FAIL"); } - if (!t->val_valid) - { + if (!t->val_valid) { res = -1; } } |