diff options
Diffstat (limited to 'post/cpu/ppc4xx/ether.c')
| -rw-r--r-- | post/cpu/ppc4xx/ether.c | 395 |
1 files changed, 395 insertions, 0 deletions
diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c new file mode 100644 index 0000000..391c815 --- /dev/null +++ b/post/cpu/ppc4xx/ether.c @@ -0,0 +1,395 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Igor Lisitsin <igor@emcraft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +/* + * Ethernet test + * + * The Ethernet Media Access Controllers (EMAC) are tested in the + * internal loopback mode. + * The controllers are configured accordingly and several packets + * are transmitted. The configurable test parameters are: + * MIN_PACKET_LENGTH - minimum size of packet to transmit + * MAX_PACKET_LENGTH - maximum size of packet to transmit + * TEST_NUM - number of tests + */ + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_ETHER + +#include <asm/cache.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <405_mal.h> +#include <ppc4xx_enet.h> +#include <malloc.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1)) +#endif + +#define MIN_PACKET_LENGTH 64 +#define MAX_PACKET_LENGTH 256 +#define TEST_NUM 1 + +static volatile mal_desc_t tx __cacheline_aligned; +static volatile mal_desc_t rx __cacheline_aligned; +static char *tx_buf; +static char *rx_buf; + +static void ether_post_init (int devnum, int hw_addr) +{ + int i; + unsigned mode_reg; +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + sys_info_t sysinfo; +#endif +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE) + unsigned long mfr; +#endif + +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + /* Need to get the OPB frequency so we can access the PHY */ + get_sys_info (&sysinfo); +#endif + +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + /* provide clocks for EMAC internal loopback */ + mfsdr (sdr_mfr, mfr); + mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum); + mtsdr (sdr_mfr, mfr); + sync (); +#endif + /* reset emac */ + out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST); + sync (); + + for (i = 0;; i++) { + if (!(in32 (EMAC_M0 + hw_addr) & EMAC_M0_SRST)) + break; + if (i >= 1000) { + printf ("Timeout resetting EMAC\n"); + break; + } + udelay (1000); + } +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + /* Whack the M1 register */ + mode_reg = 0x0; + if (sysinfo.freqOPB <= 50000000); + else if (sysinfo.freqOPB <= 66666667) + mode_reg |= EMAC_M1_OBCI_66; + else if (sysinfo.freqOPB <= 83333333) + mode_reg |= EMAC_M1_OBCI_83; + else if (sysinfo.freqOPB <= 100000000) + mode_reg |= EMAC_M1_OBCI_100; + else + mode_reg |= EMAC_M1_OBCI_GT100; + + out32 (EMAC_M1 + hw_addr, mode_reg); + +#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ + + /* set the Mal configuration reg */ +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | + MAL_CR_PLBLT_DEFAULT | 0x00330000); +#else + mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); + /* Errata 1.12: MAL_1 -- Disable MAL bursting */ + if (get_pvr() == PVR_440GP_RB) { + mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB); + } +#endif + /* setup buffer descriptors */ + tx.ctrl = MAL_TX_CTRL_WRAP; + tx.data_len = 0; + tx.data_ptr = (char*)L1_CACHE_ALIGN((u32)tx_buf); + + rx.ctrl = MAL_TX_CTRL_WRAP | MAL_RX_CTRL_EMPTY; + rx.data_len = 0; + rx.data_ptr = (char*)L1_CACHE_ALIGN((u32)rx_buf); + + switch (devnum) { + case 1: + /* setup MAL tx & rx channel pointers */ +#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR) + mtdcr (maltxctp2r, &tx); +#else + mtdcr (maltxctp1r, &tx); +#endif +#if defined(CONFIG_440) + mtdcr (maltxbattr, 0x0); + mtdcr (malrxbattr, 0x0); +#endif + mtdcr (malrxctp1r, &rx); + /* set RX buffer size */ + mtdcr (malrcbs1, PKTSIZE_ALIGN / 16); + break; + case 0: + default: + /* setup MAL tx & rx channel pointers */ +#if defined(CONFIG_440) + mtdcr (maltxbattr, 0x0); + mtdcr (malrxbattr, 0x0); +#endif + mtdcr (maltxctp0r, &tx); + mtdcr (malrxctp0r, &rx); + /* set RX buffer size */ + mtdcr (malrcbs0, PKTSIZE_ALIGN / 16); + break; + } + + /* Enable MAL transmit and receive channels */ +#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) + mtdcr (maltxcasr, (MAL_TXRX_CASR >> (devnum*2))); +#else + mtdcr (maltxcasr, (MAL_TXRX_CASR >> devnum)); +#endif + mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum)); + + /* set internal loopback mode */ + out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | EMAC_M1_ILE | + EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K | + EMAC_M1_MF_100MBPS | EMAC_M1_IST | + in32 (EMAC_M1)); + + /* set transmit enable & receive enable */ + out32 (EMAC_M0 + hw_addr, EMAC_M0_TXE | EMAC_M0_RXE); + + /* enable broadcast address */ + out32 (EMAC_RXM + hw_addr, EMAC_RMR_BAE); + + /* set transmit request threshold register */ + out32 (EMAC_TRTR + hw_addr, 0x18000000); /* 256 byte threshold */ + + /* set receive low/high water mark register */ +#if defined(CONFIG_440) + /* 440s has a 64 byte burst length */ + out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x80009000); +#else + /* 405s have a 16 byte burst length */ + out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x0f002000); +#endif /* defined(CONFIG_440) */ + out32 (EMAC_TXM1 + hw_addr, 0xf8640000); + + /* Set fifo limit entry in tx mode 0 */ + out32 (EMAC_TXM0 + hw_addr, 0x00000003); + /* Frame gap set */ + out32 (EMAC_I_FRAME_GAP_REG + hw_addr, 0x00000008); + sync (); +} + +static void ether_post_halt (int devnum, int hw_addr) +{ + int i = 0; +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + unsigned long mfr; +#endif + + /* 1st reset MAL channel */ + /* Note: writing a 0 to a channel has no effect */ +#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) + mtdcr (maltxcarr, MAL_TXRX_CASR >> (devnum * 2)); +#else + mtdcr (maltxcarr, MAL_TXRX_CASR >> devnum); +#endif + mtdcr (malrxcarr, MAL_TXRX_CASR >> devnum); + + /* wait for reset */ + while (mfdcr (malrxcasr) & (MAL_TXRX_CASR >> devnum)) { + if (i++ >= 1000) + break; + udelay (1000); + } + /* emac reset */ + out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST); + +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + /* remove clocks for EMAC internal loopback */ + mfsdr (sdr_mfr, mfr); + mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum); + mtsdr (sdr_mfr, mfr); +#endif +} + +static void ether_post_send (int devnum, int hw_addr, void *packet, int length) +{ + int i = 0; + + while (tx.ctrl & MAL_TX_CTRL_READY) { + if (i++ > 100) { + printf ("TX timeout\n"); + return; + } + udelay (1000); + } + tx.ctrl = MAL_TX_CTRL_READY | MAL_TX_CTRL_WRAP | MAL_TX_CTRL_LAST | + EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP; + tx.data_len = length; + memcpy (tx.data_ptr, packet, length); + sync (); + + out32 (EMAC_TXM0 + hw_addr, in32 (EMAC_TXM0 + hw_addr) | EMAC_TXM0_GNP0); + sync (); +} + +static int ether_post_recv (int devnum, int hw_addr, void *packet, int max_length) +{ + int length; + int i = 0; + + while (rx.ctrl & MAL_RX_CTRL_EMPTY) { + if (i++ > 100) { + printf ("RX timeout\n"); + return 0; + } + udelay (1000); + } + length = rx.data_len - 4; + if (length <= max_length) + memcpy(packet, rx.data_ptr, length); + sync (); + + rx.ctrl |= MAL_RX_CTRL_EMPTY; + sync (); + + return length; +} + + /* + * Test routines + */ + +static void packet_fill (char *packet, int length) +{ + char c = (char) length; + int i; + + /* set up ethernet header */ + memset (packet, 0xff, 14); + + for (i = 14; i < length; i++) { + packet[i] = c++; + } +} + +static int packet_check (char *packet, int length) +{ + char c = (char) length; + int i; + + for (i = 14; i < length; i++) { + if (packet[i] != c++) + return -1; + } + + return 0; +} + +static int test_ctlr (int devnum, int hw_addr) +{ + int res = -1; + char packet_send[MAX_PACKET_LENGTH]; + char packet_recv[MAX_PACKET_LENGTH]; + int length; + int i; + int l; + + ether_post_init (devnum, hw_addr); + + for (i = 0; i < TEST_NUM; i++) { + for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) { + packet_fill (packet_send, l); + + ether_post_send (devnum, hw_addr, packet_send, l); + + length = ether_post_recv (devnum, hw_addr, packet_recv, + sizeof (packet_recv)); + + if (length != l || packet_check (packet_recv, length) < 0) { + goto Done; + } + } + } + + res = 0; + +Done: + + ether_post_halt (devnum, hw_addr); + + if (res != 0) { + post_log ("EMAC%d test failed\n", devnum); + } + + return res; +} + +int ether_post_test (int flags) +{ + int res = 0; + + /* Allocate tx & rx packet buffers */ + tx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE); + rx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE); + + if (!tx_buf || !rx_buf) { + printf ("Failed to allocate packet buffers\n"); + res = -1; + goto out_free; + } + + /* EMAC0 */ + if (test_ctlr (0, 0)) + res = -1; + + /* EMAC1 */ + if (test_ctlr (1, 0x100)) + res = -1; + +out_free: + free (tx_buf); + free (rx_buf); + + return res; +} + +#endif /* CONFIG_POST & CFG_POST_ETHER */ +#endif /* CONFIG_POST */ |