diff options
Diffstat (limited to 'nand_spl')
| -rw-r--r-- | nand_spl/nand_boot_fsl_nfc.c | 72 |
1 files changed, 57 insertions, 15 deletions
diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c index a9df2a8..f4040a7 100644 --- a/nand_spl/nand_boot_fsl_nfc.c +++ b/nand_spl/nand_boot_fsl_nfc.c @@ -26,11 +26,15 @@ #include <common.h> #include <nand.h> +#ifdef CONFIG_MX31 #include <asm-arm/arch/mx31-regs.h> +#else +#include <asm-arm/arch/imx-regs.h> +#endif #include <asm/io.h> #include <fsl_nfc.h> -static struct fsl_nfc_regs *nfc; +struct fsl_nfc_regs *nfc; static void nfc_wait_ready(void) { @@ -45,13 +49,35 @@ static void nfc_wait_ready(void) writew(tmp, &nfc->nand_flash_config2); } -static void nfc_nand_init(void) +void nfc_nand_init(void) { +#if defined(MXC_NFC_V1_1) + int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512; + int config1; + + writew(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size); + + /* unlocking RAM Buff */ + writew(0x2, &nfc->configuration); + + /* hardware ECC checking and correct */ + config1 = readw(&nfc->nand_flash_config1) | NFC_ECC_EN | 0x800; + /* + * if spare size is larger that 16 bytes per 512 byte hunk + * then use 8 symbol correction instead of 4 + */ + if ((CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page) > 16) + config1 &= ~NFC_4_8N_ECC; + else + config1 |= NFC_4_8N_ECC; + writew(config1, &nfc->nand_flash_config1); +#elif defined(MXC_NFC_V1) /* unlocking RAM Buff */ writew(0x2, &nfc->configuration); /* hardware ECC checking and correct */ writew(NFC_ECC_EN, &nfc->nand_flash_config1); +#endif } static void nfc_nand_command(unsigned short command) @@ -65,12 +91,12 @@ static void nfc_nand_page_address(unsigned int page_address) { unsigned int page_count; - writew(0x00, &nfc->flash_cmd); + writew(0x00, &nfc->flash_add); writew(NFC_ADDR, &nfc->nand_flash_config2); nfc_wait_ready(); - /* code only for 2kb flash */ - if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800) { + /* code only for large page flash */ + if (CONFIG_SYS_NAND_PAGE_SIZE > 512) { writew(0x00, &nfc->flash_add); writew(NFC_ADDR, &nfc->nand_flash_config2); nfc_wait_ready(); @@ -88,22 +114,38 @@ static void nfc_nand_page_address(unsigned int page_address) page_count = page_count >> 8; } while (page_count); } + + writew(0x00, &nfc->flash_add); + writew(NFC_ADDR, &nfc->nand_flash_config2); + nfc_wait_ready(); } static void nfc_nand_data_output(void) { + int config1 = readw(&nfc->nand_flash_config1); +#ifdef NAND_MXC_2K_MULTI_CYCLE int i; +#endif + config1 |= NFC_ECC_EN | NFC_INT_MSK; + writew(config1, &nfc->nand_flash_config1); + writew(0, &nfc->buffer_address); + writew(NFC_OUTPUT, &nfc->nand_flash_config2); + nfc_wait_ready(); +#ifdef NAND_MXC_2K_MULTI_CYCLE /* - * The NAND controller requires four output commands for - * large page devices. + * This NAND controller requires multiple input commands + * for pages larger than 512 bytes. */ - for (i = 0; i < (CONFIG_SYS_NAND_PAGE_SIZE / 512); i++) { - writew(NFC_ECC_EN, &nfc->nand_flash_config1); - writew(i, &nfc->buffer_address); /* read in i:th buffer */ + for (i = 1; i < (CONFIG_SYS_NAND_PAGE_SIZE / 512); i++) { + config1 = readw(&nfc->nand_flash_config1); + config1 |= NFC_ECC_EN | NFC_INT_MSK; + writew(config1, &nfc->nand_flash_config1); + writew(i, &nfc->buffer_address); writew(NFC_OUTPUT, &nfc->nand_flash_config2); nfc_wait_ready(); } +#endif } static int nfc_nand_check_ecc(void) @@ -121,7 +163,7 @@ static int nfc_read_page(unsigned int page_address, unsigned char *buf) nfc_nand_command(NAND_CMD_READ0); nfc_nand_page_address(page_address); - if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800) + if (CONFIG_SYS_NAND_PAGE_SIZE > 512) nfc_nand_command(NAND_CMD_READSTART); nfc_nand_data_output(); /* fill the main buffer 0 */ @@ -129,7 +171,7 @@ static int nfc_read_page(unsigned int page_address, unsigned char *buf) if (nfc_nand_check_ecc()) return -1; - src = &nfc->main_area0[0]; + src = &nfc->main_area[0][0]; dst = (u32 *)buf; /* main copy loop from NAND-buffer to SDRAM memory */ @@ -154,12 +196,12 @@ static int is_badblock(int pagenumber) nfc_nand_command(NAND_CMD_READ0); nfc_nand_page_address(page); - if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800) + if (CONFIG_SYS_NAND_PAGE_SIZE > 512) nfc_nand_command(NAND_CMD_READSTART); nfc_nand_data_output(); /* fill the main buffer 0 */ - src = &nfc->spare_area0[0]; + src = &nfc->spare_area[0][0]; /* * IMPORTANT NOTE: The nand flash controller uses a non- @@ -209,7 +251,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf) if (!(page % CONFIG_SYS_NAND_PAGE_COUNT)) { /* * Yes, new block. See if this block is good. If not, - * loop until we find i good block. + * loop until we find a good block. */ while (is_badblock(page)) { page = page + CONFIG_SYS_NAND_PAGE_COUNT; |