summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/tegra-common-post.h57
-rw-r--r--include/configs/tegra-common.h20
-rw-r--r--include/configs/tegra114-common.h10
-rw-r--r--include/configs/tegra124-common.h6
-rw-r--r--include/configs/tegra20-common.h10
-rw-r--r--include/configs/tegra30-common.h10
6 files changed, 67 insertions, 46 deletions
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index e1a3bbc..76dad4e 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -66,27 +66,63 @@
#define BOOT_TARGETS_DHCP ""
#endif
+#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE)
+#define BOOTCMDS_PXE \
+ "bootcmd_pxe=" \
+ BOOTCMD_INIT_USB \
+ "dhcp; " \
+ "if pxe get; then " \
+ "pxe boot; " \
+ "fi\0"
+#define BOOT_TARGETS_PXE "pxe"
+#else
+#define BOOTCMDS_PXE ""
+#define BOOT_TARGETS_PXE ""
+#endif
+
#define BOOTCMDS_COMMON \
"rootpart=1\0" \
\
+ "do_script_boot=" \
+ "load ${devtype} ${devnum}:${rootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "source ${scriptaddr}\0" \
+ \
"script_boot=" \
- "if load ${devtype} ${devnum}:${rootpart} " \
- "${scriptaddr} ${prefix}${script}; then " \
- "echo ${script} found! Executing ...;" \
- "source ${scriptaddr};" \
- "fi;\0" \
+ "for script in ${boot_scripts}; do " \
+ "if test -e ${devtype} ${devnum}:${rootpart} " \
+ "${prefix}${script}; then " \
+ "echo Found U-Boot script " \
+ "${prefix}${script}; " \
+ "run do_script_boot; " \
+ "echo SCRIPT FAILED: continuing...; " \
+ "fi; " \
+ "done\0" \
+ \
+ "do_sysboot_boot=" \
+ "sysboot ${devtype} ${devnum}:${rootpart} any " \
+ "${scriptaddr} ${prefix}extlinux.conf\0" \
+ \
+ "sysboot_boot=" \
+ "if test -e ${devtype} ${devnum}:${rootpart} " \
+ "${prefix}extlinux.conf; then " \
+ "echo Found extlinux config " \
+ "${prefix}extlinux.conf; " \
+ "run do_sysboot_boot; " \
+ "echo SCRIPT FAILED: continuing...; " \
+ "fi\0" \
\
"scan_boot=" \
"echo Scanning ${devtype} ${devnum}...; " \
"for prefix in ${boot_prefixes}; do " \
- "for script in ${boot_scripts}; do " \
- "run script_boot; " \
- "done; " \
- "done;\0" \
+ "run sysboot_boot; " \
+ "run script_boot; " \
+ "done\0" \
\
"boot_targets=" \
BOOT_TARGETS_MMC " " \
BOOT_TARGETS_USB " " \
+ BOOT_TARGETS_PXE " " \
BOOT_TARGETS_DHCP " " \
"\0" \
\
@@ -96,7 +132,8 @@
\
BOOTCMDS_MMC \
BOOTCMDS_USB \
- BOOTCMDS_DHCP
+ BOOTCMDS_DHCP \
+ BOOTCMDS_PXE
#define CONFIG_BOOTCOMMAND \
"set usb_need_init; " \
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 522cd41..bbe417a 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -29,7 +29,6 @@
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_OF_LIBFDT /* enable passing of devicetree */
/* Environment */
#define CONFIG_ENV_VARS_UBOOT_CONFIG
@@ -69,33 +68,20 @@
#undef CONFIG_CMD_NET /* network support */
/* turn on command-line edit/hist/auto */
-#define CONFIG_CMDLINE_EDITING
#define CONFIG_COMMAND_HISTORY
-#define CONFIG_AUTO_COMPLETE
/* turn on commonly used storage-related commands */
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
#define CONFIG_PARTITION_UUIDS
-#define CONFIG_FS_EXT4
-#define CONFIG_FS_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_PART
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT V_PROMPT
/*
* Increasing the size of the IO buffer as default nfsargs size is more
@@ -133,8 +119,6 @@
#define CONFIG_TEGRA_GPIO
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_ENTERRCM
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_SUPPORT_RAW_INITRD
/* Defines for SPL */
#define CONFIG_SPL
@@ -157,4 +141,8 @@
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CRC32_VERIFY
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+#endif
+
#endif /* _TEGRA_COMMON_H_ */
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index a4e8a5f..555c237 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -26,11 +26,6 @@
*/
#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA114 /* in a NVidia Tegra114 core */
-
/* Environment information, boards can override if required */
#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */
@@ -51,6 +46,9 @@
* scriptaddr can be pretty much anywhere that doesn't conflict with something
* else. Put it above BOOTMAPSZ to eliminate conflicts.
*
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ * something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
* kernel_addr_r must be within the first 128M of RAM in order for the
* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -68,6 +66,7 @@
*/
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x90000000\0" \
+ "pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=0x81000000\0" \
"fdt_addr_r=0x82000000\0" \
"ramdisk_addr_r=0x82100000\0"
@@ -83,5 +82,6 @@
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
#endif /* _TEGRA114_COMMON_H_ */
diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h
index 0a4541b..61e5026 100644
--- a/include/configs/tegra124-common.h
+++ b/include/configs/tegra124-common.h
@@ -18,11 +18,6 @@
*/
#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA124 /* is an NVIDIA Tegra124 core */
-
/* Environment information, boards can override if required */
#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */
@@ -79,5 +74,6 @@
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
#endif /* _TEGRA124_COMMON_H_ */
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index b009a31..21bf977 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -24,11 +24,6 @@
*/
#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA20 /* in a NVidia Tegra20 core */
-
/* Environment information, boards can override if required */
#define CONFIG_LOADADDR 0x00408000 /* def. location for kernel */
@@ -49,6 +44,9 @@
* scriptaddr can be pretty much anywhere that doesn't conflict with something
* else. Put it above BOOTMAPSZ to eliminate conflicts.
*
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ * something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
* kernel_addr_r must be within the first 128M of RAM in order for the
* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -66,6 +64,7 @@
*/
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x10000000\0" \
+ "pxefile_addr_r=0x10100000\0" \
"kernel_addr_r=0x01000000\0" \
"fdt_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x02100000\0"
@@ -96,6 +95,7 @@
*/
#define CONFIG_USB_EHCI_TXFIFO_THRESH 10
#define CONFIG_EHCI_IS_TDI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
/* Total I2C ports on Tegra20 */
#define TEGRA_I2C_NUM_CONTROLLERS 4
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index b5550d7..443c842 100644
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -23,11 +23,6 @@
*/
#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA30 /* in a NVidia Tegra30 core */
-
/* Environment information, boards can override if required */
#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */
@@ -48,6 +43,9 @@
* scriptaddr can be pretty much anywhere that doesn't conflict with something
* else. Put it above BOOTMAPSZ to eliminate conflicts.
*
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ * something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
* kernel_addr_r must be within the first 128M of RAM in order for the
* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -65,6 +63,7 @@
*/
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x90000000\0" \
+ "pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=0x81000000\0" \
"fdt_addr_r=0x82000000\0" \
"ramdisk_addr_r=0x82100000\0"
@@ -80,5 +79,6 @@
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
#endif /* _TEGRA30_COMMON_H_ */
generated by cgit v1.1 at 2024-12-27 06:10:45 +0000