diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/KAREF.h | 284 | ||||
| -rw-r--r-- | include/configs/METROBOX.h | 349 |
2 files changed, 0 insertions, 633 deletions
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h deleted file mode 100644 index 546b725..0000000 --- a/include/configs/KAREF.h +++ /dev/null @@ -1,284 +0,0 @@ -/* - * (C) Copyright 2004 Sandburst Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * KAMINOREFDES.h - configuration for the Sandburst Kamino Reference - * design. - ***********************************************************************/ - -/* - * $Id: KAREF.h,v 1.6 2005/06/03 15:05:25 tsawyer Exp $ - * - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */ -#define CONFIG_440GX 1 /* Specifc GX support */ -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF80000 - -#undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time!*/ -#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ - -#define CONFIG_VERY_BIG_RAM 1 -#define CONFIG_VERSION_VARIABLE - -#define CONFIG_IDENT_STRING " Sandburst Kamino Reference Design" - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */ -#define CONFIG_SYS_MONITOR_BASE 0xfff80000 /* start of monitor */ -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ - -#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) -#define CONFIG_SYS_KAREF_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08200000) -#define CONFIG_SYS_OFEM_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08400000) -#define CONFIG_SYS_BME32_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08500000) -#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700) - -/* Here for completeness */ -#define CONFIG_SYS_OFEMAC_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08600000) - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */ - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -/*----------------------------------------------------------------------- - * NVRAM/RTC - * - * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located. - * The DS1743 code assumes this condition (i.e. -- it assumes the base - * address for the RTC registers is: - * - * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - * - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/ -#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/ -#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */ - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F -#define CONFIG_SYS_I2C_PPC4XX_CH1 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 /* I2C speed 400kHz */ -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F -#define CONFIG_SYS_I2C_NOPROBES { { 0, 0x69} } /* Don't probe these addrs */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */ -#undef CONFIG_ENV_IS_IN_FLASH /* ... not in flash */ -#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ -#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */ - -#define CONFIG_ENV_SIZE 0x1000 /* Size of Env vars */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_NVRAM_BASE_ADDR) - -#define CONFIG_BOOTDELAY 5 /* 5 second autoboot */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/*----------------------------------------------------------------------- - * Networking - *----------------------------------------------------------------------*/ -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ -#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ -#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */ -#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */ -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */ -#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */ -#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */ -#define CONFIG_PHY_RESET_DELAY 1000 -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */ -#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */ -#define CONFIG_SYS_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_PING -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_NET -#define CONFIG_CMD_ELF -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT - - -/* Include NetConsole support */ -#define CONFIG_NETCONSOLE - -/* Include auto complete with tabs */ -#define CONFIG_AUTO_COMPLETE 1 -#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "KaRefDes=> " /* Monitor Command Prompt */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* HUSH for ext'd cli */ - - -/*----------------------------------------------------------------------- - * Console Buffer - *----------------------------------------------------------------------*/ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ - -/*----------------------------------------------------------------------- - * Memory Test - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -/*----------------------------------------------------------------------- - * Compact Flash (in true IDE mode) - *----------------------------------------------------------------------*/ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ - -#define CONFIG_SYS_ATA_BASE_ADDR 0xF0000000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */ - -#define CONFIG_SYS_ATA_STRIDE 2 /* Directly connected CF, needs a stride - to get to the correct offset */ -#define CONFIG_DOS_PARTITION 1 /* Include dos partition */ - -/*----------------------------------------------------------------------- - * PCI - *----------------------------------------------------------------------*/ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices */ -#define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE) - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target*/ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ -#endif - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - *----------------------------------------------------------------------*/ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h deleted file mode 100644 index 69ab5bb..0000000 --- a/include/configs/METROBOX.h +++ /dev/null @@ -1,349 +0,0 @@ -/* - * (C) Copyright 2004 Sandburst Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * METROBOX.h - configuration Sandburst MetroBox - ***********************************************************************/ - -/* - * $Id: METROBOX.h,v 1.21 2005/06/03 15:05:25 tsawyer Exp $ - * - * - * $Log: METROBOX.h,v $ - * Revision 1.21 2005/06/03 15:05:25 tsawyer - * MB rev 2.0.3 KA rev 0.0.7. Add CONFIG_VERSION_VARIABLE, Add fakeled to MB - * - * Revision 1.20 2005/04/11 20:51:11 tsawyer - * fix ethernet - * - * Revision 1.19 2005/04/06 15:13:36 tsawyer - * Update appropriate files to coincide with u-boot 1.1.3 - * - * Revision 1.18 2005/03/10 14:16:02 tsawyer - * add def'n for cis8201 short etch option. - * - * Revision 1.17 2005/03/09 19:49:51 tsawyer - * Remove KGDB to allow use of 2nd serial port - * - * Revision 1.16 2004/12/02 19:00:23 tsawyer - * Add misc_init_f to turn on i2c-1 and all four fans before sdram init - * - * Revision 1.15 2004/09/15 18:04:12 tsawyer - * add multiple serial port support - * - * Revision 1.14 2004/09/03 15:27:51 tsawyer - * All metrobox boards are at 66.66 sys clock - * - * Revision 1.13 2004/08/05 20:27:46 tsawyer - * Remove system ace definitions, add net console support - * - * Revision 1.12 2004/07/29 20:00:13 tsawyer - * Add i2c bus 1 - * - * Revision 1.11 2004/07/21 13:44:18 tsawyer - * SystemACE is out, CF direct to local bus is in - * - * Revision 1.10 2004/06/29 19:08:55 tsawyer - * Add CONFIG_MISC_INIT_R - * - * Revision 1.9 2004/06/28 21:30:53 tsawyer - * Fix default BOOTARGS - * - * Revision 1.8 2004/06/17 15:51:08 tsawyer - * auto complete - * - * Revision 1.7 2004/06/17 15:08:49 tsawyer - * Add autocomplete - * - * Revision 1.6 2004/06/15 12:33:57 tsawyer - * debugging checkpoint - * - * Revision 1.5 2004/06/12 19:48:28 tsawyer - * Debugging checkpoint - * - * Revision 1.4 2004/06/02 13:03:06 tsawyer - * Fix eth addrs - * - * Revision 1.3 2004/05/18 19:56:10 tsawyer - * Change default bootcommand to pImage.metrobox - * - * Revision 1.2 2004/05/18 14:13:44 tsawyer - * Add bringup values for bootargs and bootcommand. - * Remove definition of ipaddress and serverip addresses. - * - * Revision 1.1 2004/04/16 15:08:54 tsawyer - * Initial Revision - * - * - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_METROBOX 1 /* Board is Metrobox */ -#define CONFIG_440GX 1 /* Specifc GX support */ -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF80000 - -#undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time!*/ -#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ - -#define CONFIG_VERY_BIG_RAM 1 -#define CONFIG_VERSION_VARIABLE - -#define CONFIG_IDENT_STRING " Sandburst Metrobox" - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */ -#define CONFIG_SYS_MONITOR_BASE 0xfff80000 /* start of monitor */ -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ - -#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08200000) -#define CONFIG_SYS_BME32_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08500000) -#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700) - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */ - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -/*----------------------------------------------------------------------- - * NVRAM/RTC - * - * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located. - * The DS1743 code assumes this condition (i.e. -- it assumes the base - * address for the RTC registers is: - * - * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - * - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/ -#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/ -#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */ - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F -#define CONFIG_SYS_I2C_PPC4XX_CH1 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 /* I2C speed 400kHz */ -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F -#define CONFIG_SYS_I2C_NOPROBES { { 0, 0x69} } /* Don't probe these addrs */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */ -#undef CONFIG_ENV_IS_IN_FLASH /* ... not in flash */ -#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ -#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */ - -#define CONFIG_ENV_SIZE 0x1000 /* Size of Env vars */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_NVRAM_BASE_ADDR) - -#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/nfs rw nfsroot=$serverip:/home/metrobox0 nfsaddrs=$ipaddr:::::eth0:none " -#define CONFIG_BOOTCOMMAND "tftp 8000000 pImage.metrobox;bootm 8000000" -#define CONFIG_BOOTDELAY 5 /* disable autoboot */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/*----------------------------------------------------------------------- - * Networking - *----------------------------------------------------------------------*/ -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ -#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ -#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */ -#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */ -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */ -#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */ -#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */ -#define CONFIG_PHY_RESET_DELAY 1000 -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */ -#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */ -#define CONFIG_SYS_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_PING -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_NET -#define CONFIG_CMD_ELF -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT - - -/* Include NetConsole support */ -#define CONFIG_NETCONSOLE - -/* Include auto complete with tabs */ -#define CONFIG_AUTO_COMPLETE 1 -#define CONFIG_AUTO_COMPLETE 1 -#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "MetroBox=> " /* Monitor Command Prompt */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* HUSH for ext'd cli */ - - -/*----------------------------------------------------------------------- - * Console Buffer - *----------------------------------------------------------------------*/ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ - -/*----------------------------------------------------------------------- - * Memory Test - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -/*----------------------------------------------------------------------- - * Compact Flash (in true IDE mode) - *----------------------------------------------------------------------*/ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ - -#define CONFIG_SYS_ATA_BASE_ADDR 0xF0000000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */ - -#define CONFIG_SYS_ATA_STRIDE 2 /* Directly connected CF, needs a stride - to get to the correct offset */ -#define CONFIG_DOS_PARTITION 1 /* Include dos partition */ - -/*----------------------------------------------------------------------- - * PCI - *----------------------------------------------------------------------*/ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices */ -#define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE) - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target*/ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ -#endif - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - *----------------------------------------------------------------------*/ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */ - -#endif /* __CONFIG_H */ |