diff options
Diffstat (limited to 'include')
20 files changed, 759 insertions, 1 deletions
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index 47c18e7..029b7f9 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -34,6 +34,32 @@ static inline void sync(void) } /* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + +/* * Generic virtual read/write. Note that we don't support half-word * read/writes. We define __arch_*[bl] here, and leave __arch_*w * to the architecture specific code. diff --git a/include/asm-avr32/arch-at32ap700x/chip-features.h b/include/asm-avr32/arch-at32ap700x/chip-features.h new file mode 100644 index 0000000..29b1fd6 --- /dev/null +++ b/include/asm-avr32/arch-at32ap700x/chip-features.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2007 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_ARCH_CHIP_FEATURES_H__ +#define __ASM_AVR32_ARCH_CHIP_FEATURES_H__ + +/* Currently, all the AP700x chips have these */ +#define AT32AP700x_CHIP_HAS_USART +#define AT32AP700x_CHIP_HAS_MMCI + +/* Only AP7000 has ethernet interface */ +#ifdef CONFIG_AT32AP7000 +#define AT32AP700x_CHIP_HAS_MACB +#endif + +#endif /* __ASM_AVR32_ARCH_CHIP_FEATURES_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h index 7e20d97..ea84c08 100644 --- a/include/asm-avr32/arch-at32ap7000/clk.h +++ b/include/asm-avr32/arch-at32ap700x/clk.h @@ -22,6 +22,8 @@ #ifndef __ASM_AVR32_ARCH_CLK_H__ #define __ASM_AVR32_ARCH_CLK_H__ +#include <asm/arch/chip-features.h> + #ifdef CONFIG_PLL #define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL) #else @@ -50,10 +52,13 @@ static inline unsigned long get_sdram_clk_rate(void) { return get_hsb_clk_rate(); } +#ifdef AT32AP700x_CHIP_HAS_USART static inline unsigned long get_usart_clk_rate(unsigned int dev_id) { return get_pba_clk_rate(); } +#endif +#ifdef AT32AP700x_CHIP_HAS_USART static inline unsigned long get_macb_pclk_rate(unsigned int dev_id) { return get_pbb_clk_rate(); @@ -62,9 +67,12 @@ static inline unsigned long get_macb_hclk_rate(unsigned int dev_id) { return get_hsb_clk_rate(); } +#endif +#ifdef AT32AP700x_CHIP_HAS_MMCI static inline unsigned long get_mci_clk_rate(void) { return get_pbb_clk_rate(); } +#endif #endif /* __ASM_AVR32_ARCH_CLK_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/gpio.h b/include/asm-avr32/arch-at32ap700x/gpio.h index e4812d4..b10a3e4 100644 --- a/include/asm-avr32/arch-at32ap7000/gpio.h +++ b/include/asm-avr32/arch-at32ap700x/gpio.h @@ -22,6 +22,7 @@ #ifndef __ASM_AVR32_ARCH_GPIO_H__ #define __ASM_AVR32_ARCH_GPIO_H__ +#include <asm/arch/chip-features.h> #include <asm/arch/memory-map.h> #define NR_GPIO_CONTROLLERS 5 @@ -201,12 +202,19 @@ void gpio_select_periph_A(unsigned int pin, int use_pullup); void gpio_select_periph_B(unsigned int pin, int use_pullup); void gpio_enable_ebi(void); + +#ifdef AT32AP700x_CHIP_HAS_USART void gpio_enable_usart0(void); void gpio_enable_usart1(void); void gpio_enable_usart2(void); void gpio_enable_usart3(void); +#endif +#ifdef AT32AP700x_CHIP_HAS_MACB void gpio_enable_macb0(void); void gpio_enable_macb1(void); +#endif +#ifdef AT32AP700x_CHIP_HAS_MMCI void gpio_enable_mmci(void); +#endif #endif /* __ASM_AVR32_ARCH_GPIO_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/hmatrix2.h b/include/asm-avr32/arch-at32ap700x/hmatrix2.h index b0e787a..b0e787a 100644 --- a/include/asm-avr32/arch-at32ap7000/hmatrix2.h +++ b/include/asm-avr32/arch-at32ap700x/hmatrix2.h diff --git a/include/asm-avr32/arch-at32ap7000/memory-map.h b/include/asm-avr32/arch-at32ap700x/memory-map.h index 5513e88..5513e88 100644 --- a/include/asm-avr32/arch-at32ap7000/memory-map.h +++ b/include/asm-avr32/arch-at32ap700x/memory-map.h diff --git a/include/asm-avr32/arch-at32ap7000/mmc.h b/include/asm-avr32/arch-at32ap700x/mmc.h index fcfbbb3..fcfbbb3 100644 --- a/include/asm-avr32/arch-at32ap7000/mmc.h +++ b/include/asm-avr32/arch-at32ap700x/mmc.h diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h index 3c0d569..ba14674 100644 --- a/include/asm-avr32/io.h +++ b/include/asm-avr32/io.h @@ -93,4 +93,36 @@ static inline void sync(void) { } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + * + * This implementation works for memory below 512MiB (flash, etc.) as + * well as above 3.5GiB (internal peripherals.) + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (1 << 7) +#define MAP_WRBACK (MAP_WRCOMBINE | (1 << 9)) +#define MAP_WRTHROUGH (MAP_WRBACK | (1 << 0)) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + if (flags == MAP_WRBACK) + return (void *)P1SEGADDR(paddr); + else + return (void *)P2SEGADDR(paddr); +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long len) +{ + +} + #endif /* __ASM_AVR32_IO_H */ diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index 332d2c6..512e13d 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -41,6 +41,32 @@ static inline void sync(void) } /* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + +/* * These are for ISA/PCI shared memory _only_ and should never be used * on any other type of memory, including Zorro memory. They are meant to * access the bus in the bus byte order which is little-endian!. diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h index e64d788..db4f442 100644 --- a/include/asm-i386/io.h +++ b/include/asm-i386/io.h @@ -205,4 +205,30 @@ static inline void sync(void) { } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + #endif diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h index e14a581..91d7592 100644 --- a/include/asm-m68k/io.h +++ b/include/asm-m68k/io.h @@ -28,6 +28,20 @@ #include <asm/byteorder.h> +/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates + * two accesses to memory, which may be undesirable for some devices. + */ +#define __raw_readb(addr) \ + ({ u8 __v = (*(volatile u8 *) (addr)); __v; }) +#define __raw_readw(addr) \ + ({ u16 __v = (*(volatile u16 *) (addr)); __v; }) +#define __raw_readl(addr) \ + ({ u32 __v = (*(volatile u32 *) (addr)); __v; }) + +#define __raw_writeb(addr,b) (void)((*(volatile u8 *) (addr)) = (b)) +#define __raw_writew(addr,w) (void)((*(volatile u16 *) (addr)) = (w)) +#define __raw_writel(addr,l) (void)((*(volatile u32 *) (addr)) = (l)) + #define readb(addr) in_8((volatile u8 *)(addr)) #define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) #if !defined(__BIG_ENDIAN) @@ -218,4 +232,31 @@ static inline void sync(void) * compatibility (CFI driver) */ } + +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + #endif /* __ASM_M68K_IO_H__ */ diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h index 1c77ade..90d1842 100644 --- a/include/asm-microblaze/io.h +++ b/include/asm-microblaze/io.h @@ -129,4 +129,30 @@ static inline void sync(void) { } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + #endif /* __MICROBLAZE_IO_H__ */ diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 1e060f7..e27d1f1 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -465,4 +465,30 @@ static inline void sync(void) { } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + #endif /* _ASM_IO_H */ diff --git a/include/asm-nios/io.h b/include/asm-nios/io.h index d77695a..6fc339f 100644 --- a/include/asm-nios/io.h +++ b/include/asm-nios/io.h @@ -23,6 +23,14 @@ #ifndef __ASM_NIOS_IO_H_ #define __ASM_NIOS_IO_H_ +#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) + +#define __raw_readb(a) (*(volatile unsigned char *)(a)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_readl(a) (*(volatile unsigned int *)(a)) + #define readb(addr)\ ({unsigned char val;\ asm volatile( " pfxio 0 \n"\ @@ -101,4 +109,30 @@ static inline void sync(void) { } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + #endif /* __ASM_NIOS_IO_H_ */ diff --git a/include/asm-nios2/io.h b/include/asm-nios2/io.h index 5bb5322..a52b95c 100644 --- a/include/asm-nios2/io.h +++ b/include/asm-nios2/io.h @@ -29,10 +29,44 @@ static inline void sync(void) __asm__ __volatile__ ("sync" : : : "memory"); } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + extern unsigned char inb (unsigned char *port); extern unsigned short inw (unsigned short *port); extern unsigned inl (unsigned port); +#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) + +#define __raw_readb(a) (*(volatile unsigned char *)(a)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_readl(a) (*(volatile unsigned int *)(a)) + #define readb(addr)\ ({unsigned char val;\ asm volatile( "ldbio %0, 0(%1)" :"=r"(val) : "r" (addr)); val;}) diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index 11dfa1c..91c9c1e 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -121,13 +121,43 @@ static inline void isync(void) #define iobarrier_w() eieio() /* + * Non ordered and non-swapping "raw" accessors + */ +#define __iomem +#define PCI_FIX_ADDR(addr) (addr) + +static inline unsigned char __raw_readb(const volatile void __iomem *addr) +{ + return *(volatile unsigned char *)PCI_FIX_ADDR(addr); +} +static inline unsigned short __raw_readw(const volatile void __iomem *addr) +{ + return *(volatile unsigned short *)PCI_FIX_ADDR(addr); +} +static inline unsigned int __raw_readl(const volatile void __iomem *addr) +{ + return *(volatile unsigned int *)PCI_FIX_ADDR(addr); +} +static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) +{ + *(volatile unsigned char *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) +{ + *(volatile unsigned short *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) +{ + *(volatile unsigned int *)PCI_FIX_ADDR(addr) = v; +} + +/* * 8, 16 and 32 bit, big and little endian I/O operations, with barrier. * * Read operations have additional twi & isync to make sure the read * is actually performed (i.e. the data has come back) before we start * executing any following instructions. */ -#define __iomem extern inline int in_8(const volatile unsigned char __iomem *addr) { int ret; @@ -208,4 +238,30 @@ extern inline void out_be32(volatile unsigned __iomem *addr, int val) __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); } +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +typedef unsigned long phys_addr_t; + +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + #endif diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h new file mode 100644 index 0000000..194788b --- /dev/null +++ b/include/configs/atstk1003.h @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2007 Atmel Corporation + * + * Configuration settings for the ATSTK1003 CPU daughterboard + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_AVR32 1 +#define CONFIG_AT32AP 1 +#define CONFIG_AT32AP7001 1 +#define CONFIG_ATSTK1003 1 +#define CONFIG_ATSTK1000 1 + +#define CONFIG_ATSTK1000_EXT_FLASH 1 + +/* + * Timer clock frequency. We're using the CPU-internal COUNT register + * for this, so this is equivalent to the CPU core clock frequency + */ +#define CFG_HZ 1000 + +/* + * Set up the PLL to run at 140 MHz, the CPU to run at the PLL + * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the + * PLL frequency. + * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz + */ +#define CONFIG_PLL 1 +#define CFG_POWER_MANAGER 1 +#define CFG_OSC0_HZ 20000000 +#define CFG_PLL0_DIV 1 +#define CFG_PLL0_MUL 7 +#define CFG_PLL0_SUPPRESS_CYCLES 16 +/* + * Set the CPU running at: + * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz + */ +#define CFG_CLKDIV_CPU 0 +/* + * Set the HSB running at: + * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz + */ +#define CFG_CLKDIV_HSB 1 +/* + * Set the PBA running at: + * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz + */ +#define CFG_CLKDIV_PBA 2 +/* + * Set the PBB running at: + * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz + */ +#define CFG_CLKDIV_PBB 1 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CFG_PLL0_OPT 0x04 + +#undef CONFIG_USART0 +#define CONFIG_USART1 1 +#undef CONFIG_USART2 +#undef CONFIG_USART3 + +/* User serviceable stuff */ +#define CONFIG_DOS_PARTITION 1 + +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "console=ttyS0 root=/dev/mmcblk0p1 rootwait" + +#define CONFIG_BOOTCOMMAND \ + "mmcinit; ext2load mmc 0:1 0x10400000 /boot/uImage; bootm" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_AUTOBOOT 1 +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#define CONFIG_ATMEL_USART 1 +#define CONFIG_PIO2 1 +#define CFG_HSDRAMC 1 +#define CONFIG_MMC 1 + +#define CFG_DCACHE_LINESZ 32 +#define CFG_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +/* External flash on STK1000 */ +#if 0 +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#endif + +#define CFG_FLASH_BASE 0x00000000 +#define CFG_FLASH_SIZE 0x800000 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 135 + +#define CFG_MONITOR_BASE CFG_FLASH_BASE + +#define CFG_INTRAM_BASE 0x24000000 +#define CFG_INTRAM_SIZE 0x8000 + +#define CFG_SDRAM_BASE 0x10000000 + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 65536 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE) + +#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) + +#define CFG_MALLOC_LEN (256*1024) + +/* Allow 4MB for the kernel run-time image */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000) +#define CFG_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CFG_PROMPT "Uboot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000) +#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } + +#endif /* __CONFIG_H */ diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h new file mode 100644 index 0000000..1bad171 --- /dev/null +++ b/include/configs/atstk1004.h @@ -0,0 +1,185 @@ +/* + * Copyright (C) 2007 Atmel Corporation + * + * Configuration settings for the ATSTK1003 CPU daughterboard + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_AVR32 1 +#define CONFIG_AT32AP 1 +#define CONFIG_AT32AP7002 1 +#define CONFIG_ATSTK1004 1 +#define CONFIG_ATSTK1000 1 + +#define CONFIG_ATSTK1000_EXT_FLASH 1 + +/* + * Timer clock frequency. We're using the CPU-internal COUNT register + * for this, so this is equivalent to the CPU core clock frequency + */ +#define CFG_HZ 1000 + +/* + * Set up the PLL to run at 140 MHz, the CPU to run at the PLL + * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the + * PLL frequency. + * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz + */ +#define CONFIG_PLL 1 +#define CFG_POWER_MANAGER 1 +#define CFG_OSC0_HZ 20000000 +#define CFG_PLL0_DIV 1 +#define CFG_PLL0_MUL 7 +#define CFG_PLL0_SUPPRESS_CYCLES 16 +/* + * Set the CPU running at: + * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz + */ +#define CFG_CLKDIV_CPU 0 +/* + * Set the HSB running at: + * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz + */ +#define CFG_CLKDIV_HSB 1 +/* + * Set the PBA running at: + * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz + */ +#define CFG_CLKDIV_PBA 2 +/* + * Set the PBB running at: + * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz + */ +#define CFG_CLKDIV_PBB 1 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CFG_PLL0_OPT 0x04 + +#undef CONFIG_USART0 +#define CONFIG_USART1 1 +#undef CONFIG_USART2 +#undef CONFIG_USART3 + +/* User serviceable stuff */ +#define CONFIG_DOS_PARTITION 1 + +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "console=ttyS0 root=/dev/mmcblk0p1 rootwait" + +#define CONFIG_BOOTCOMMAND \ + "mmcinit; ext2load mmc 0:1 0x10200000 /boot/uImage; bootm" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_AUTOBOOT 1 +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#define CONFIG_ATMEL_USART 1 +#define CONFIG_PIO2 1 +#define CFG_HSDRAMC 1 +#define CONFIG_MMC 1 + +#define CFG_DCACHE_LINESZ 32 +#define CFG_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +/* External flash on STK1000 */ +#if 0 +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#endif + +#define CFG_FLASH_BASE 0x00000000 +#define CFG_FLASH_SIZE 0x800000 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 135 + +#define CFG_MONITOR_BASE CFG_FLASH_BASE + +#define CFG_INTRAM_BASE 0x24000000 +#define CFG_INTRAM_SIZE 0x8000 + +#define CFG_SDRAM_BASE 0x10000000 +#define CFG_SDRAM_16BIT 1 + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 65536 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE) + +#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) + +#define CFG_MALLOC_LEN (256*1024) + +/* Allow 4MB for the kernel run-time image */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000) +#define CFG_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CFG_PROMPT "Uboot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000) +#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } + +#endif /* __CONFIG_H */ diff --git a/include/fdt_support.h b/include/fdt_support.h index 8f781d4..3d6c1a8 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -44,6 +44,7 @@ void do_fixup_by_compat(void *fdt, const char *compat, const char *prop, const void *val, int len, int create); void do_fixup_by_compat_u32(void *fdt, const char *compat, const char *prop, u32 val, int create); +int fdt_fixup_memory(void *blob, u64 start, u64 size); void fdt_fixup_ethernet(void *fdt, bd_t *bd); #ifdef CONFIG_OF_HAS_UBOOT_ENV diff --git a/include/flash.h b/include/flash.h index b0bf733..2ed1e20 100644 --- a/include/flash.h +++ b/include/flash.h @@ -52,6 +52,9 @@ typedef struct { ushort ext_addr; /* extended query table address */ ushort cfi_version; /* cfi version */ ushort cfi_offset; /* offset for cfi query */ + ulong addr_unlock1; /* unlock address 1 for AMD flash roms */ + ulong addr_unlock2; /* unlock address 2 for AMD flash roms */ + const char *name; /* human-readable name */ #endif } flash_info_t; @@ -77,6 +80,7 @@ typedef struct { #define FLASH_CFI_X8 0x00 #define FLASH_CFI_X16 0x01 #define FLASH_CFI_X8X16 0x02 +#define FLASH_CFI_X16X32 0x05 /* convert between bit value and numeric value */ #define CFI_FLASH_SHIFT_WIDTH 3 @@ -101,6 +105,13 @@ extern void flash_read_user_serial(flash_info_t * info, void * buffer, int offse extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int offset, int len); #endif /* CFG_FLASH_PROTECTION */ +#ifdef CONFIG_FLASH_CFI_LEGACY +extern ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info); +extern int jedec_flash_match(flash_info_t *info, ulong base); +#define CFI_CMDSET_AMD_LEGACY 0xFFF0 +#endif + + /*----------------------------------------------------------------------- * return codes from flash_write(): */ |