diff options
Diffstat (limited to 'include')
39 files changed, 3055 insertions, 129 deletions
diff --git a/include/.gitignore b/include/.gitignore index d8fda80..ab7d4c7 100644 --- a/include/.gitignore +++ b/include/.gitignore @@ -1,3 +1,4 @@ +/autoconf.mk* /asm /asm-ppc/arch /bmp_logo.h diff --git a/include/asm-arm/arch-arm1136/mux.h b/include/asm-arm/arch-arm1136/mux.h index 67c8419..4fdb9c6 100644 --- a/include/asm-arm/arch-arm1136/mux.h +++ b/include/asm-arm/arch-arm1136/mux.h @@ -28,6 +28,7 @@ typedef unsigned int uint32; void muxSetupSDRC(void); void muxSetupGPMC(void); void muxSetupUsb0(void); +void muxSetupUsbHost(void); void muxSetupUart3(void); void muxSetupI2C1(void); void muxSetupUART1(void); @@ -53,6 +54,10 @@ void muxSetupHDQ(void); #define CONTROL_PADCONF_GPMC_NCS0_BYTE1 ((volatile unsigned char *)0x4800008D) #define CONTROL_PADCONF_GPMC_NCS0_BYTE2 ((volatile unsigned char *)0x4800008E) #define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE4 (0x48000090) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE5 (0x48000091) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE6 (0x48000092) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE7 (0x48000093) /* Pin Muxing registers used for SDRC */ #define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0) @@ -70,6 +75,7 @@ void muxSetupHDQ(void); #define CONTROL_PADCONF_SPI1_SIMO ((volatile unsigned char *)0x48000100) #define CONTROL_PADCONF_SPI1_SOMI ((volatile unsigned char *)0x48000101) #define CONTROL_PADCONF_SPI1_NCS0 ((volatile unsigned char *)0x48000102) +#define CONTROL_PADCONF_SPI1_NCS1 (0x48000103) #define CONTROL_PADCONF_MCBSP1_FSR ((volatile unsigned char *)0x4800010B) @@ -151,8 +157,20 @@ void muxSetupHDQ(void); #define CONTROL_PADCONF_USB0_SE0 ((volatile uint8 *)0x48000122) #define CONTROL_PADCONF_USB0_DAT ((volatile uint8 *)0x48000123) +/* Pin Muxing registres used for USB1. */ +#define CONTROL_PADCONF_USB1_RCV (0x480000EB) +#define CONTROL_PADCONF_USB1_TXEN (0x480000EC) + /* Pin Muxing registers used for UART3/IRDA */ #define CONTROL_PADCONF_UART3_TX_IRTX ((volatile uint8 *)0x48000118) #define CONTROL_PADCONF_UART3_RX_IRRX ((volatile uint8 *)0x48000119) +/* Pin Muxing registers used for GPIO */ +#define CONTROL_PADCONF_GPIO69 (0x480000ED) +#define CONTROL_PADCONF_GPIO70 (0x480000EE) +#define CONTROL_PADCONF_GPIO102 (0x48000116) +#define CONTROL_PADCONF_GPIO103 (0x48000117) +#define CONTROL_PADCONF_GPIO104 (0x48000118) +#define CONTROL_PADCONF_GPIO105 (0x48000119) + #endif diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-arm1136/omap2420.h index d833035..0c11bec 100644 --- a/include/asm-arm/arch-arm1136/omap2420.h +++ b/include/asm-arm/arch-arm1136/omap2420.h @@ -77,6 +77,20 @@ #define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) #define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) #define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) +#define GPMC_CONFIG1_2 (OMAP2420_GPMC_BASE+0xC0) +#define GPMC_CONFIG2_2 (OMAP2420_GPMC_BASE+0xC4) +#define GPMC_CONFIG3_2 (OMAP2420_GPMC_BASE+0xC8) +#define GPMC_CONFIG4_2 (OMAP2420_GPMC_BASE+0xCC) +#define GPMC_CONFIG5_2 (OMAP2420_GPMC_BASE+0xD0) +#define GPMC_CONFIG6_2 (OMAP2420_GPMC_BASE+0xD4) +#define GPMC_CONFIG7_2 (OMAP2420_GPMC_BASE+0xD8) +#define GPMC_CONFIG1_3 (OMAP2420_GPMC_BASE+0xF0) +#define GPMC_CONFIG2_3 (OMAP2420_GPMC_BASE+0xF4) +#define GPMC_CONFIG3_3 (OMAP2420_GPMC_BASE+0xF8) +#define GPMC_CONFIG4_3 (OMAP2420_GPMC_BASE+0xFC) +#define GPMC_CONFIG5_3 (OMAP2420_GPMC_BASE+0x100) +#define GPMC_CONFIG6_3 (OMAP2420_GPMC_BASE+0x104) +#define GPMC_CONFIG7_3 (OMAP2420_GPMC_BASE+0x108) /* SMS */ #define OMAP2420_SMS_BASE 0x68008000 @@ -209,13 +223,24 @@ #define SRAM_OFFSET2 0x0000F800 #define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) -#define LOW_LEVEL_SRAM_STACK 0x4020FFFC - -#define PERIFERAL_PORT_BASE 0x480FE003 - /* FPGA on Debug board.*/ #define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) #define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) #endif /* endif CONFIG_2420H4 */ +#if defined(CONFIG_APOLLON) +#define APOLLON_CS0_BASE 0x00000000 /* OneNAND */ +#define APOLLON_CS1_BASE 0x08000000 /* ethernet */ +#define APOLLON_CS2_BASE 0x10000000 /* OneNAND */ +#define APOLLON_CS3_BASE 0x18000000 /* NOR */ + +#define ETH_CONTROL_REG (APOLLON_CS1_BASE + 0x30b) +#define LAN_RESET_REGISTER (APOLLON_CS1_BASE + 0x1c) +#endif /* endif CONFIG_APOLLON */ + +/* Common */ +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC + +#define PERIFERAL_PORT_BASE 0x480FE003 + #endif diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h index f6a5b4f..ab19047 100644 --- a/include/asm-arm/mach-types.h +++ b/include/asm-arm/mach-types.h @@ -737,6 +737,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_CB3RUFC 726 #define MACH_TYPE_MP2USB 727 #define MACH_TYPE_AT91SAM9261EK 848 +#define MACH_TYPE_OMAP_APOLLON 919 #define MACH_TYPE_PDNB3 1002 #define MACH_TYPE_AT91SAM9260EK 1099 #define MACH_TYPE_AT91RM9200DF 1119 @@ -6826,6 +6827,18 @@ extern unsigned int __machine_arch_type; # define machine_is_omap_h4() (0) #endif +#ifdef CONFIG_MACH_OMAP_APOLLON +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP_APOLLON +# endif +# define machine_is_omap_apollon() (machine_arch_type == MACH_TYPE_OMAP_APOLLON) +#else +# define machine_is_omap_apollon() (0) +#endif + #ifdef CONFIG_MACH_N10 # ifdef machine_arch_type # undef machine_arch_type diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index 05aee74..91acf9b 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -55,7 +55,7 @@ typedef struct global_data { #if defined(CONFIG_MPC83XX) /* There are other clocks in the MPC83XX */ u32 csb_clk; -#if defined (CONFIG_MPC834X) || defined(CONFIG_MPC831X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X) u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; @@ -63,6 +63,12 @@ typedef struct global_data { #if defined (CONFIG_MPC834X) u32 usbmph_clk; #endif /* CONFIG_MPC834X */ +#if defined(CONFIG_MPC815) + u32 tdm_clk; +#endif +#if defined(CONFIG_MPC837X) + u32 sdhc_clk; +#endif u32 core_clk; u32 i2c1_clk; u32 i2c2_clk; @@ -71,6 +77,13 @@ typedef struct global_data { u32 lclk_clk; u32 ddr_clk; u32 pci_clk; +#if defined(CONFIG_MPC837X) + u32 pciexp1_clk; + u32 pciexp2_clk; +#endif +#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315) + u32 sata_clk; +#endif #if defined(CONFIG_MPC8360) u32 ddr_sec_clk; #endif /* CONFIG_MPC8360 */ diff --git a/include/asm-ppc/gpio.h b/include/asm-ppc/gpio.h index d0c3eba..c3a4a88 100644 --- a/include/asm-ppc/gpio.h +++ b/include/asm-ppc/gpio.h @@ -88,6 +88,7 @@ typedef struct { void gpio_config(int pin, int in_out, int gpio_alt, int out_val); void gpio_write_bit(int pin, int val); int gpio_read_out_bit(int pin); +int gpio_read_in_bit(int pin); void gpio_set_chip_configuration(void); #endif /* __ASM_PPC_GPIO_H */ diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 0de9338..34ea295 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2004-2006 Freescale Semiconductor, Inc. + * (C) Copyright 2004-2007 Freescale Semiconductor, Inc. * * MPC83xx Internal Memory Map * @@ -63,7 +63,8 @@ typedef struct sysconf83xx { u8 res6[0x0C]; u32 ddrcdr; /* DDR Control Driver Register */ u32 ddrdsr; /* DDR Debug Status Register */ - u8 res7[0xD0]; + u32 obir; /* Output Buffer Impedance Register */ + u8 res7[0xCC]; } sysconf83xx_t; /* @@ -553,6 +554,55 @@ typedef struct security83xx { u8 fixme[0x10000]; } security83xx_t; +/* + * PCI Express + */ +typedef struct pex83xx { + u8 fixme[0x1000]; +} pex83xx_t; + +/* + * SATA + */ +typedef struct sata83xx { + u8 fixme[0x1000]; +} sata83xx_t; + +/* + * eSDHC + */ +typedef struct sdhc83xx { + u8 fixme[0x1000]; +} sdhc83xx_t; + +/* + * SerDes + */ +typedef struct serdes83xx { + u8 fixme[0x100]; +} serdes83xx_t; + +/* + * On Chip ROM + */ +typedef struct rom83xx { + u8 mem[0x10000]; +} rom83xx_t; + +/* + * TDM + */ +typedef struct tdm83xx { + u8 fixme[0x200]; +} tdm83xx_t; + +/* + * TDM DMAC + */ +typedef struct tdmdmac83xx { + u8 fixme[0x2000]; +} tdmdmac83xx_t; + #if defined(CONFIG_MPC834X) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ @@ -590,7 +640,7 @@ typedef struct immap { u8 res7[0xC0000]; } immap_t; -#elif defined(CONFIG_MPC831X) +#elif defined(CONFIG_MPC8313) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ @@ -625,6 +675,95 @@ typedef struct immap { u8 res7[0xC0000]; } immap_t; +#elif defined(CONFIG_MPC8315) +typedef struct immap { + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + gpio83xx_t gpio[1]; /* General purpose I/O module */ + u8 res0[0x1300]; + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res1[0x1300]; + duart83xx_t duart[2]; /* DUART */ + u8 res2[0x900]; + lbus83xx_t lbus; /* Local Bus Controller Registers */ + u8 res3[0x1000]; + spi83xx_t spi; /* Serial Peripheral Interface */ + dma83xx_t dma; /* DMA */ + pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ + u8 res4[0x80]; + ios83xx_t ios; /* Sequencer */ + pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ + u8 res5[0xa00]; + pex83xx_t pciexp[2]; /* PCI Express Controller */ + u8 res6[0xb000]; + tdm83xx_t tdm; /* TDM Controller */ + u8 res7[0x1e00]; + sata83xx_t sata[2]; /* SATA Controller */ + u8 res8[0x9000]; + usb83xx_t usb[1]; /* USB DR Controller */ + tsec83xx_t tsec[2]; + u8 res9[0x6000]; + tdmdmac83xx_t tdmdmac; /* TDM DMAC */ + u8 res10[0x2000]; + security83xx_t security; + u8 res11[0xA3000]; + serdes83xx_t serdes[1]; /* SerDes Registers */ + u8 res12[0x1CF00]; +} immap_t; + +#elif defined(CONFIG_MPC837X) +typedef struct immap { + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + gpio83xx_t gpio[2]; /* General purpose I/O module */ + u8 res0[0x1200]; + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res1[0x1300]; + duart83xx_t duart[2]; /* DUART */ + u8 res2[0x900]; + lbus83xx_t lbus; /* Local Bus Controller Registers */ + u8 res3[0x1000]; + spi83xx_t spi; /* Serial Peripheral Interface */ + dma83xx_t dma; /* DMA */ + pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ + u8 res4[0x80]; + ios83xx_t ios; /* Sequencer */ + pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ + u8 res5[0xa00]; + pex83xx_t pciexp[2]; /* PCI Express Controller */ + u8 res6[0xd000]; + sata83xx_t sata[4]; /* SATA Controller */ + u8 res7[0x7000]; + usb83xx_t usb[1]; /* USB DR Controller */ + tsec83xx_t tsec[2]; + u8 res8[0x8000]; + sdhc83xx_t sdhc; /* SDHC Controller */ + u8 res9[0x1000]; + security83xx_t security; + u8 res10[0xA3000]; + serdes83xx_t serdes[2]; /* SerDes Registers */ + u8 res11[0xCE00]; + rom83xx_t rom; /* On Chip ROM */ +} immap_t; + #elif defined(CONFIG_MPC8360) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ diff --git a/include/asm-ppc/ppc4xx-intvec.h b/include/asm-ppc/ppc4xx-intvec.h new file mode 100644 index 0000000..8d04b69 --- /dev/null +++ b/include/asm-ppc/ppc4xx-intvec.h @@ -0,0 +1,403 @@ +/* +* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +/* + * Interrupt vector number definitions to ease the + * 405 -- 440 porting pain ;-) + * + * NOTE: They're not all here yet ... update as needed. + * + */ + +#ifndef _VECNUMS_H_ +#define _VECNUMS_H_ + +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + +/* UIC 0 */ +#define VECNUM_U0 0 /* UART 0 */ +#define VECNUM_U1 1 /* UART 1 */ +#define VECNUM_IIC0 2 /* IIC */ +#define VECNUM_KRD 3 /* Kasumi Ready for data */ +#define VECNUM_KDA 4 /* Kasumi Data Available */ +#define VECNUM_PCRW 5 /* PCI command register write */ +#define VECNUM_PPM 6 /* PCI power management */ +#define VECNUM_IIC1 7 /* IIC */ +#define VECNUM_SPI 8 /* SPI */ +#define VECNUM_EPCISER 9 /* External PCI SERR */ +#define VECNUM_MTE 10 /* MAL TXEOB */ +#define VECNUM_MRE 11 /* MAL RXEOB */ +#define VECNUM_D0 12 /* DMA channel 0 */ +#define VECNUM_D1 13 /* DMA channel 1 */ +#define VECNUM_D2 14 /* DMA channel 2 */ +#define VECNUM_D3 15 /* DMA channel 3 */ +#define VECNUM_UD0 16 /* UDMA irq 0 */ +#define VECNUM_UD1 17 /* UDMA irq 1 */ +#define VECNUM_UD2 18 /* UDMA irq 2 */ +#define VECNUM_UD3 19 /* UDMA irq 3 */ +#define VECNUM_HSB2D 20 /* USB2.0 Device */ +#define VECNUM_USBDEV 20 /* USB 1.1/USB 2.0 Device */ +#define VECNUM_OHCI1 21 /* USB2.0 Host OHCI irq 1 */ +#define VECNUM_OHCI2 22 /* USB2.0 Host OHCI irq 2 */ +#define VECNUM_EIP94 23 /* Security EIP94 */ +#define VECNUM_ETH0 24 /* Emac 0 */ +#define VECNUM_ETH1 25 /* Emac 1 */ +#define VECNUM_EHCI 26 /* USB2.0 Host EHCI */ +#define VECNUM_EIR4 27 /* External interrupt 4 */ +#define VECNUM_UIC2NC 28 /* UIC2 non-critical interrupt */ +#define VECNUM_UIC2C 29 /* UIC2 critical interrupt */ +#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ +#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ + +/* UIC 1 */ +#define VECNUM_MS (32 + 0) /* MAL SERR */ +#define VECNUM_MTDE (32 + 1) /* MAL TXDE */ +#define VECNUM_MRDE (32 + 2) /* MAL RXDE */ +#define VECNUM_U2 (32 + 3) /* UART 2 */ +#define VECNUM_U3 (32 + 4) /* UART 3 */ +#define VECNUM_EBCO (32 + 5) /* EBCO interrupt status */ +#define VECNUM_NDFC (32 + 6) /* NDFC */ +#define VECNUM_KSLE (32 + 7) /* KASUMI slave error */ +#define VECNUM_CT5 (32 + 8) /* GPT compare timer 5 */ +#define VECNUM_CT6 (32 + 9) /* GPT compare timer 6 */ +#define VECNUM_PLB34I0 (32 + 10) /* PLB3X4X MIRQ0 */ +#define VECNUM_PLB34I1 (32 + 11) /* PLB3X4X MIRQ1 */ +#define VECNUM_PLB34I2 (32 + 12) /* PLB3X4X MIRQ2 */ +#define VECNUM_PLB34I3 (32 + 13) /* PLB3X4X MIRQ3 */ +#define VECNUM_PLB34I4 (32 + 14) /* PLB3X4X MIRQ4 */ +#define VECNUM_PLB34I5 (32 + 15) /* PLB3X4X MIRQ5 */ +#define VECNUM_CT0 (32 + 16) /* GPT compare timer 0 */ +#define VECNUM_CT1 (32 + 17) /* GPT compare timer 1 */ +#define VECNUM_EIR7 (32 + 18) /* External interrupt 7 */ +#define VECNUM_EIR8 (32 + 19) /* External interrupt 8 */ +#define VECNUM_EIR9 (32 + 20) /* External interrupt 9 */ +#define VECNUM_CT2 (32 + 21) /* GPT compare timer 2 */ +#define VECNUM_CT3 (32 + 22) /* GPT compare timer 3 */ +#define VECNUM_CT4 (32 + 23) /* GPT compare timer 4 */ +#define VECNUM_SRE (32 + 24) /* Serial ROM error */ +#define VECNUM_GPTDC (32 + 25) /* GPT decrementer pulse */ +#define VECNUM_RSVD0 (32 + 26) /* Reserved */ +#define VECNUM_EPCIPER (32 + 27) /* External PCI PERR */ +#define VECNUM_EIR0 (32 + 28) /* External interrupt 0 */ +#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */ +#define VECNUM_EIR1 (32 + 30) /* External interrupt 1 */ +#define VECNUM_EWU1 (32 + 31) /* Ethernet 1 wakeup */ + +#define VECNUM_TXDE VECNUM_MTDE +#define VECNUM_RXDE VECNUM_MRDE + +/* UIC 2 */ +#define VECNUM_EIR5 (64 + 0) /* External interrupt 5 */ +#define VECNUM_EIR6 (64 + 1) /* External interrupt 6 */ +#define VECNUM_OPB (64 + 2) /* OPB to PLB bridge int stat */ +#define VECNUM_EIR2 (64 + 3) /* External interrupt 2 */ +#define VECNUM_EIR3 (64 + 4) /* External interrupt 3 */ +#define VECNUM_DDR2 (64 + 5) /* DDR2 sdram */ +#define VECNUM_MCTX0 (64 + 6) /* MAl intp coalescence TX0 */ +#define VECNUM_MCTX1 (64 + 7) /* MAl intp coalescence TX1 */ +#define VECNUM_MCTR0 (64 + 8) /* MAl intp coalescence TR0 */ +#define VECNUM_MCTR1 (64 + 9) /* MAl intp coalescence TR1 */ + +#elif defined(CONFIG_440SPE) + +/* UIC 0 */ +#define VECNUM_U0 0 /* UART0 */ +#define VECNUM_U1 1 /* UART1 */ +#define VECNUM_IIC0 2 /* IIC0 */ +#define VECNUM_IIC1 3 /* IIC1 */ +#define VECNUM_PIM 4 /* PCI inbound message */ +#define VECNUM_PCRW 5 /* PCI command reg write */ +#define VECNUM_PPM 6 /* PCI power management */ +#define VECNUM_MSI0 7 /* PCI MSI level 0 */ +#define VECNUM_MSI1 8 /* PCI MSI level 0 */ +#define VECNUM_MSI2 9 /* PCI MSI level 0 */ +#define VECNUM_D0 12 /* DMA channel 0 */ +#define VECNUM_D1 13 /* DMA channel 1 */ +#define VECNUM_D2 14 /* DMA channel 2 */ +#define VECNUM_D3 15 /* DMA channel 3 */ +#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ +#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ + +/* UIC 1 */ +#define VECNUM_MS (32 + 1 ) /* MAL SERR */ +#define VECNUM_TXDE (32 + 2 ) /* MAL TXDE */ +#define VECNUM_RXDE (32 + 3 ) /* MAL RXDE */ +#define VECNUM_MTE (32 + 6 ) /* MAL Tx EOB */ +#define VECNUM_MRE (32 + 7 ) /* MAL Rx EOB */ +#define VECNUM_CT0 (32 + 12 ) /* GPT compare timer 0 */ +#define VECNUM_CT1 (32 + 13 ) /* GPT compare timer 1 */ +#define VECNUM_CT2 (32 + 14 ) /* GPT compare timer 2 */ +#define VECNUM_CT3 (32 + 15 ) /* GPT compare timer 3 */ +#define VECNUM_CT4 (32 + 16 ) /* GPT compare timer 4 */ +#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */ +#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */ + +/* UIC 2 */ +#define VECNUM_EIR5 (64 + 24) /* External interrupt 5 */ +#define VECNUM_EIR4 (64 + 25) /* External interrupt 4 */ +#define VECNUM_EIR3 (64 + 26) /* External interrupt 3 */ +#define VECNUM_EIR2 (64 + 27) /* External interrupt 2 */ +#define VECNUM_EIR1 (64 + 28) /* External interrupt 1 */ +#define VECNUM_EIR0 (64 + 29) /* External interrupt 0 */ + +#elif defined(CONFIG_440SP) + +/* UIC 0 */ +#define VECNUM_U0 0 /* UART0 */ +#define VECNUM_U1 1 /* UART1 */ +#define VECNUM_IIC0 2 /* IIC0 */ +#define VECNUM_IIC1 3 /* IIC1 */ +#define VECNUM_PIM 4 /* PCI inbound message */ +#define VECNUM_PCRW 5 /* PCI command reg write */ +#define VECNUM_PPM 6 /* PCI power management */ +#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ +#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ + +/* UIC 1 */ +#define VECNUM_EIR0 (32 + 0) /* External interrupt 0 */ +#define VECNUM_MS (32 + 1) /* MAL SERR */ +#define VECNUM_TXDE (32 + 2) /* MAL TXDE */ +#define VECNUM_RXDE (32 + 3) /* MAL RXDE */ +#define VECNUM_MTE (32 + 6) /* MAL Tx EOB */ +#define VECNUM_MRE (32 + 7) /* MAL Rx EOB */ +#define VECNUM_CT0 (32 + 12) /* GPT compare timer 0 */ +#define VECNUM_CT1 (32 + 13) /* GPT compare timer 1 */ +#define VECNUM_CT2 (32 + 14) /* GPT compare timer 2 */ +#define VECNUM_CT3 (32 + 15) /* GPT compare timer 3 */ +#define VECNUM_CT4 (32 + 16) /* GPT compare timer 4 */ +#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */ +#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */ + +#elif defined(CONFIG_440) + +/* UIC 0 */ +#define VECNUM_U0 0 /* UART0 */ +#define VECNUM_U1 1 /* UART1 */ +#define VECNUM_IIC0 2 /* IIC0 */ +#define VECNUM_IIC1 3 /* IIC1 */ +#define VECNUM_PIM 4 /* PCI inbound message */ +#define VECNUM_PCRW 5 /* PCI command reg write */ +#define VECNUM_PPM 6 /* PCI power management */ +#define VECNUM_MSI0 7 /* PCI MSI level 0 */ +#define VECNUM_MSI1 8 /* PCI MSI level 0 */ +#define VECNUM_MSI2 9 /* PCI MSI level 0 */ +#define VECNUM_MTE 10 /* MAL TXEOB */ +#define VECNUM_MRE 11 /* MAL RXEOB */ +#define VECNUM_D0 12 /* DMA channel 0 */ +#define VECNUM_D1 13 /* DMA channel 1 */ +#define VECNUM_D2 14 /* DMA channel 2 */ +#define VECNUM_D3 15 /* DMA channel 3 */ +#define VECNUM_CT0 18 /* GPT compare timer 0 */ +#define VECNUM_CT1 19 /* GPT compare timer 1 */ +#define VECNUM_CT2 20 /* GPT compare timer 2 */ +#define VECNUM_CT3 21 /* GPT compare timer 3 */ +#define VECNUM_CT4 22 /* GPT compare timer 4 */ +#define VECNUM_EIR0 23 /* External interrupt 0 */ +#define VECNUM_EIR1 24 /* External interrupt 1 */ +#define VECNUM_EIR2 25 /* External interrupt 2 */ +#define VECNUM_EIR3 26 /* External interrupt 3 */ +#define VECNUM_EIR4 27 /* External interrupt 4 */ +#define VECNUM_EIR5 28 /* External interrupt 5 */ +#define VECNUM_EIR6 29 /* External interrupt 6 */ +#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ +#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ + +/* UIC 1 */ +#define VECNUM_MS (32 + 0 ) /* MAL SERR */ +#define VECNUM_TXDE (32 + 1 ) /* MAL TXDE */ +#define VECNUM_RXDE (32 + 2 ) /* MAL RXDE */ +#define VECNUM_USBDEV (32 + 23) /* USB 1.1/USB 2.0 Device */ +#define VECNUM_ETH0 (32 + 28) /* Ethernet 0 interrupt status */ +#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */ + +#else /* !defined(CONFIG_440) */ + +#if defined(CONFIG_405EZ) +#define VECNUM_D0 0 /* DMA channel 0 */ +#define VECNUM_D1 1 /* DMA channel 1 */ +#define VECNUM_D2 2 /* DMA channel 2 */ +#define VECNUM_D3 3 /* DMA channel 3 */ +#define VECNUM_1588 4 /* IEEE 1588 network synchronization */ +#define VECNUM_U0 5 /* UART0 */ +#define VECNUM_U1 6 /* UART1 */ +#define VECNUM_CAN0 7 /* CAN 0 */ +#define VECNUM_CAN1 8 /* CAN 1 */ +#define VECNUM_SPI 9 /* SPI */ +#define VECNUM_IIC0 10 /* I2C */ +#define VECNUM_CHT0 11 /* Chameleon timer high pri interrupt */ +#define VECNUM_CHT1 12 /* Chameleon timer high pri interrupt */ +#define VECNUM_USBH1 13 /* USB Host 1 */ +#define VECNUM_USBH2 14 /* USB Host 2 */ +#define VECNUM_USBDEV 15 /* USB Device */ +#define VECNUM_ETH0 16 /* 10/100 Ethernet interrupt status */ +#define VECNUM_EWU0 17 /* Ethernet wakeup sequence detected */ + +#define VECNUM_MADMAL 18 /* Logical OR of following MadMAL int */ +#define VECNUM_MS 18 /* MAL_SERR_INT */ +#define VECNUM_TXDE 18 /* MAL_TXDE_INT */ +#define VECNUM_RXDE 18 /* MAL_RXDE_INT */ + +#define VECNUM_MTE 19 /* MAL TXEOB */ +#define VECNUM_MTE1 20 /* MAL TXEOB1 */ +#define VECNUM_MRE 21 /* MAL RXEOB */ +#define VECNUM_NAND 22 /* NAND Flash controller */ +#define VECNUM_ADC 23 /* ADC */ +#define VECNUM_DAC 24 /* DAC */ +#define VECNUM_OPB2PLB 25 /* OPB to PLB bridge interrupt */ +#define VECNUM_RESERVED0 26 /* Reserved */ +#define VECNUM_EIR0 27 /* External interrupt 0 */ +#define VECNUM_EIR1 28 /* External interrupt 1 */ +#define VECNUM_EIR2 29 /* External interrupt 2 */ +#define VECNUM_EIR3 30 /* External interrupt 3 */ +#define VECNUM_EIR4 31 /* External interrupt 4 */ + +#elif defined(CONFIG_405EX) + +/* UIC 0 */ +#define VECNUM_U0 00 +#define VECNUM_U1 01 +#define VECNUM_IIC0 02 +#define VECNUM_PKA 03 +#define VECNUM_TRNG 04 +#define VECNUM_EBM 05 +#define VECNUM_BGI 06 +#define VECNUM_IIC1 07 +#define VECNUM_SPI 08 +#define VECNUM_EIR0 09 +#define VECNUM_MTE 10 /* MAL Tx EOB */ +#define VECNUM_MRE 11 /* MAL Rx EOB */ +#define VECNUM_DMA0 12 +#define VECNUM_DMA1 13 +#define VECNUM_DMA2 14 +#define VECNUM_DMA3 15 +#define VECNUM_PCIE0AL 16 +#define VECNUM_PCIE0VPD 17 +#define VECNUM_RPCIE0HRST 18 +#define VECNUM_FPCIE0HRST 19 +#define VECNUM_PCIE0TCR 20 +#define VECNUM_PCIEMSI0 21 +#define VECNUM_PCIEMSI1 22 +#define VECNUM_SECURITY 23 +#define VECNUM_ETH0 24 +#define VECNUM_ETH1 25 +#define VECNUM_PCIEMSI2 26 +#define VECNUM_EIR4 27 +#define VECNUM_UIC2NC 28 +#define VECNUM_UIC2C 29 +#define VECNUM_UIC1NC 30 +#define VECNUM_UIC1C 31 + +/* UIC 1 */ +#define VECNUM_MS (32 + 00) /* MAL SERR */ +#define VECNUM_TXDE (32 + 01) /* MAL TXDE */ +#define VECNUM_RXDE (32 + 02) /* MAL RXDE */ +#define VECNUM_PCIE0BMVC0 (32 + 03) +#define VECNUM_PCIE0DCRERR (32 + 04) +#define VECNUM_EBC (32 + 05) +#define VECNUM_NDFC (32 + 06) +#define VECNUM_PCEI1DCRERR (32 + 07) +#define VECNUM_CT8 (32 + 08) +#define VECNUM_CT9 (32 + 09) +#define VECNUM_PCIE1AL (32 + 10) +#define VECNUM_PCIE1VPD (32 + 11) +#define VECNUM_RPCE1HRST (32 + 12) +#define VECNUM_FPCE1HRST (32 + 13) +#define VECNUM_PCIE1TCR (32 + 14) +#define VECNUM_PCIE1VC0 (32 + 15) +#define VECNUM_CT3 (32 + 16) +#define VECNUM_CT4 (32 + 17) +#define VECNUM_EIR7 (32 + 18) +#define VECNUM_EIR8 (32 + 19) +#define VECNUM_EIR9 (32 + 20) +#define VECNUM_CT5 (32 + 21) +#define VECNUM_CT6 (32 + 22) +#define VECNUM_CT7 (32 + 23) +#define VECNUM_SROM (32 + 24) /* SERIAL ROM */ +#define VECNUM_GPTDECPULS (32 + 25) /* GPT Decrement pulse */ +#define VECNUM_EIR2 (32 + 26) +#define VECNUM_EIR5 (32 + 27) +#define VECNUM_EIR6 (32 + 28) +#define VECNUM_EMAC0WAKE (32 + 29) +#define VECNUM_EIR1 (32 + 30) +#define VECNUM_EMAC1WAKE (32 + 31) + +/* UIC 2 */ +#define VECNUM_PCIE0INTA (64 + 00) /* PCIE0 INTA */ +#define VECNUM_PCIE0INTB (64 + 01) /* PCIE0 INTB */ +#define VECNUM_PCIE0INTC (64 + 02) /* PCIE0 INTC */ +#define VECNUM_PCIE0INTD (64 + 03) /* PCIE0 INTD */ +#define VECNUM_EIR3 (64 + 04) /* External IRQ 3 */ +#define VECNUM_DDRMCUE (64 + 05) +#define VECNUM_DDRMCCE (64 + 06) +#define VECNUM_MALINTCOATX0 (64 + 07) /* Interrupt coalecence TX0 */ +#define VECNUM_MALINTCOATX1 (64 + 08) /* Interrupt coalecence TX1 */ +#define VECNUM_MALINTCOARX0 (64 + 09) /* Interrupt coalecence RX0 */ +#define VECNUM_MALINTCOARX1 (64 + 10) /* Interrupt coalecence RX1 */ +#define VECNUM_PCIE1INTA (64 + 11) /* PCIE0 INTA */ +#define VECNUM_PCIE1INTB (64 + 12) /* PCIE0 INTB */ +#define VECNUM_PCIE1INTC (64 + 13) /* PCIE0 INTC */ +#define VECNUM_PCIE1INTD (64 + 14) /* PCIE0 INTD */ +#define VECNUM_RPCIEMSI2 (64 + 15) /* MSI level 2 */ +#define VECNUM_PCIEMSI3 (64 + 16) /* MSI level 2 */ +#define VECNUM_PCIEMSI4 (64 + 17) /* MSI level 2 */ +#define VECNUM_PCIEMSI5 (64 + 18) /* MSI level 2 */ +#define VECNUM_PCIEMSI6 (64 + 19) /* MSI level 2 */ +#define VECNUM_PCIEMSI7 (64 + 20) /* MSI level 2 */ +#define VECNUM_PCIEMSI8 (64 + 21) /* MSI level 2 */ +#define VECNUM_PCIEMSI9 (64 + 22) /* MSI level 2 */ +#define VECNUM_PCIEMSI10 (64 + 23) /* MSI level 2 */ +#define VECNUM_PCIEMSI11 (64 + 24) /* MSI level 2 */ +#define VECNUM_PCIEMSI12 (64 + 25) /* MSI level 2 */ +#define VECNUM_PCIEMSI13 (64 + 26) /* MSI level 2 */ +#define VECNUM_PCIEMSI14 (64 + 27) /* MSI level 2 */ +#define VECNUM_PCIEMSI15 (64 + 28) /* MSI level 2 */ +#define VECNUM_PLB4XAHB (64 + 29) /* PLBxAHB bridge */ +#define VECNUM_USBWAKE (64 + 30) /* USB wakup */ +#define VECNUM_USBOTG (64 + 31) /* USB OTG */ + +#else /* !CONFIG_405EZ */ + +#define VECNUM_U0 0 /* UART0 */ +#define VECNUM_U1 1 /* UART1 */ +#define VECNUM_D0 5 /* DMA channel 0 */ +#define VECNUM_D1 6 /* DMA channel 1 */ +#define VECNUM_D2 7 /* DMA channel 2 */ +#define VECNUM_D3 8 /* DMA channel 3 */ +#define VECNUM_EWU0 9 /* Ethernet wakeup */ +#define VECNUM_MS 10 /* MAL SERR */ +#define VECNUM_MTE 11 /* MAL TXEOB */ +#define VECNUM_MRE 12 /* MAL RXEOB */ +#define VECNUM_TXDE 13 /* MAL TXDE */ +#define VECNUM_RXDE 14 /* MAL RXDE */ +#define VECNUM_ETH0 15 /* Ethernet interrupt status */ +#define VECNUM_EIR0 25 /* External interrupt 0 */ +#define VECNUM_EIR1 26 /* External interrupt 1 */ +#define VECNUM_EIR2 27 /* External interrupt 2 */ +#define VECNUM_EIR3 28 /* External interrupt 3 */ +#define VECNUM_EIR4 29 /* External interrupt 4 */ +#define VECNUM_EIR5 30 /* External interrupt 5 */ +#define VECNUM_EIR6 31 /* External interrupt 6 */ +#endif /* defined(CONFIG_405EZ) */ + +#endif /* defined(CONFIG_440) */ + +#endif /* _VECNUMS_H_ */ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index f58b38a..9fbbdf8 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -884,6 +884,7 @@ #define SVR_8544_E 0x803C #define SVR_8548 0x8031 #define SVR_8548_E 0x8039 +#define SVR_8610 0x80A0 #define SVR_8641 0x8090 #define SVR_8568_E 0x807D diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index d7ef65d..f3965ef 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -73,6 +73,7 @@ #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ #define CONFIG_CMD_SNTP /* SNTP support */ #define CONFIG_CMD_SPI /* SPI utility */ +#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ #define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */ #define CONFIG_CMD_USB /* USB Support */ #define CONFIG_CMD_VFD /* VFD support (TRAB) */ diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index bfbf3a8..3eb3131 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -273,7 +273,9 @@ * Virtex2 FPGA configuration support */ #define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA CFG_XILINX_VIRTEX2 +#define CONFIG_FPGA +#define CONFIG_FPGA_XILINX +#define CONFIG_FPGA_VIRTEX2 #define CFG_FPGA_PROG_FEEDBACK diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index db30958..35637f9 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -192,7 +192,9 @@ /* FPGA - Spartan 2 */ /* experiment -#define CONFIG_FPGA CFG_SPARTAN3 +#define CONFIG_FPGA +#define CONFIG_FPGA_XILINX +#define CONFIG_FPGA_SPARTAN3 #define CONFIG_FPGA_COUNT 1 #define CFG_FPGA_PROG_FEEDBACK #define CFG_FPGA_CHECK_CTRLC diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 6568fe1..c9a9c83 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -178,6 +178,7 @@ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ #define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ @@ -230,11 +231,7 @@ /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8313@0" -#define OF_SOC "soc8313@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc8313@e0000000/serial@4500" +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* * Serial Port @@ -326,7 +323,7 @@ */ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 - #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 376973b..564de02 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -116,6 +116,7 @@ #undef CFG_RAMBOOT #endif +/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ @@ -269,12 +270,7 @@ /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8323@0" -#define OF_SOC "soc8323@e0000000" -#define OF_QE "qe@e0100000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500" +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ @@ -354,8 +350,8 @@ */ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 - #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + #define CFG_ENV_SECT_SIZE 0x20000 #define CFG_ENV_SIZE 0x2000 #else #define CFG_NO_FLASH 1 /* Flash is not usable now */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index c9c6d88..a48b311 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -145,6 +145,7 @@ #undef CFG_RAMBOOT #endif +/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ @@ -320,12 +321,7 @@ /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8323@0" -#define OF_SOC "soc8323@e0000000" -#define OF_QE "qe@e0100000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500" +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ @@ -410,8 +406,8 @@ */ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 - #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + #define CFG_ENV_SECT_SIZE 0x20000 #define CFG_ENV_SIZE 0x2000 #else #define CFG_NO_FLASH 1 /* Flash is not usable now */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 92555ba..03409bb 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -341,11 +341,7 @@ /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8349@0" -#define OF_SOC "soc8349@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ @@ -456,7 +452,7 @@ */ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 - #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 54cab52..49dc0de 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -261,6 +261,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ @@ -297,12 +298,8 @@ boards, we say we have two, but don't display a message if we find only one. */ /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP - -#define OF_CPU "PowerPC,8349@0" -#define OF_SOC "soc8349@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* * PCI @@ -404,8 +401,8 @@ boards, we say we have two, but don't display a message if we find only one. */ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ - #define CFG_ENV_ADDR (CFG_MONITOR_BASE + (4 * CFG_ENV_SECT_SIZE)) #define CFG_ENV_SIZE 0x2000 #else #define CFG_NO_FLASH /* Flash is not usable now */ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 41f062c..fedb8a9 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -170,6 +170,7 @@ #undef CFG_RAMBOOT #endif +/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ @@ -346,16 +347,8 @@ /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 -#undef CONFIG_OF_FLAT_TREE #define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_HAS_BD_T 1 -#define CONFIG_OF_HAS_UBOOT_ENV 1 - -#define OF_CPU "PowerPC,8360@0" -#define OF_SOC "soc8360@e0000000" -#define OF_QE "qe@e0100000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc8360@e0000000/serial@4500" +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ @@ -443,8 +436,8 @@ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 - #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + #define CFG_ENV_SECT_SIZE 0x20000 #define CFG_ENV_SIZE 0x2000 #else #define CFG_NO_FLASH 1 /* Flash is not usable now */ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h new file mode 100644 index 0000000..0958e6b --- /dev/null +++ b/include/configs/MPC837XEMDS.h @@ -0,0 +1,600 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_MPC83XX 1 /* MPC83XX family */ +#define CONFIG_MPC837X 1 /* MPC837X CPU specific */ +#define CONFIG_MPC837XEMDS 1 /* MPC837XEMDS board specific */ + +/* + * System Clock Setup + */ +#ifdef CONFIG_PCISLAVE +#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ +#else +#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ 66000000 +#endif + +/* + * Hardware Reset Configuration Word + * if CLKIN is 66MHz, then + * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz + */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_SVCOD_DIV_2 |\ + HRCWL_CSB_TO_CLKIN_6X1 |\ + HRCWL_CORE_TO_CSB_1_5X1) + +#ifdef CONFIG_PCISLAVE +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_AGENT |\ + HRCWH_PCI1_ARBITER_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LDP_CLEAR) +#else +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LDP_CLEAR) +#endif + +/* + * eTSEC Clock Config + */ +#define CFG_SCCR_TSEC1CM 1 /* CSB:eTSEC1 = 1:1 */ +#define CFG_SCCR_TSEC2CM 1 /* CSB:eTSEC2 = 1:1 */ + +/* + * System IO Config + */ +#define CFG_SICRH 0x00000000 +#define CFG_SICRL 0x00000000 + +/* + * Output Buffer Impedance + */ +#define CFG_OBIR 0x31100000 + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R + +/* + * IMMR new address + */ +#define CFG_IMMR 0xE0000000 + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 +#define CFG_83XX_DDR_USES_CS0 +#define CFG_DDRCDR_VALUE 0x80080001 /* ODT 150ohm on SoC */ + +#undef CONFIG_DDR_ECC /* support DDR ECC function */ +#undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ + +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#define CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */ + +#if defined(CONFIG_SPD_EEPROM) +#define SPD_EEPROM_ADDRESS 0x51 /* I2C address of DDR SODIMM SPD */ +#else +/* + * Manually set up DDR parameters + * WHITE ELECTRONIC DESGGNS - W3HG64M72EEU403PD4 SO-DIMM + * consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5 + */ +#define CFG_DDR_SIZE 512 /* MB */ +#define CFG_DDR_CS0_BNDS 0x0000001f +#define CFG_DDR_CS0_CONFIG ( CSCONFIG_EN \ + | 0x00010000 /* ODT_WR to CSn */ \ + | CSCONFIG_ROW_BIT_14 | CSCONFIG_COL_BIT_10 ) + /* 0x80010202 */ +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_RRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WWT_SHIFT ) \ + | ( 6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \ + | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) + /* 0x00620802 */ +#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \ + | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ + | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \ + | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ + | (13 << TIMING_CFG1_REFREC_SHIFT ) \ + | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \ + | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ + | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) + /* 0x3935d322 */ +#define CFG_DDR_TIMING_2 ( ( 2 << TIMING_CFG2_ADD_LAT_SHIFT ) \ + | ( 6 << TIMING_CFG2_CPO_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ + | ( 4 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ + | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ + | ( 8 << TIMING_CFG2_FOUR_ACT_SHIFT) ) + /* 0x231088c8 */ +#define CFG_DDR_INTERVAL ( ( 0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT ) \ + | ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) + /* 0x03E00100 */ +#define CFG_DDR_SDRAM_CFG 0x43000000 +#define CFG_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */ +#define CFG_DDR_MODE ( ( 0x0450 << SDRAM_MODE_ESD_SHIFT ) \ + | ( 0x1432 << SDRAM_MODE_SD_SHIFT ) ) + /* ODT 150ohm CL=3, AL=2 on SDRAM */ +#define CFG_DDR_MODE2 0x00000000 +#endif + +/* + * Memory test + */ +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00040000 /* memtest region */ +#define CFG_MEMTEST_END 0x00140000 + +/* + * The reserved memory + */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) +#define CFG_LBC_LBCR 0x00000000 + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CFG_FLASH_SIZE 32 /* max FLASH size is 32M */ + +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ + OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +/* + * BCSR on the Local Bus + */ +#define CFG_BCSR 0xF8000000 +#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ + +#define CFG_BR1_PRELIM (CFG_BCSR | 0x00000801) /* Port size=8bit, MSEL=GPCM */ +#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ + +/* + * NAND Flash on the Local Bus + */ +#define CFG_NAND_BASE 0xE0600000 /* 0xE0600000 */ +#define CFG_BR3_PRELIM ( CFG_NAND_BASE \ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V ) /* valid */ +#define CFG_OR3_PRELIM ( 0xFFFF8000 /* length 32K */ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR ) + /* 0xFFFF8396 */ + +#define CFG_LBLAWBAR3_PRELIM CFG_NAND_BASE +#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* Pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +/* + * Config on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI_MEM_BASE 0x80000000 +#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE +#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI_MMIO_BASE 0x90000000 +#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE +#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI_IO_BASE 0xE0300000 +#define CFG_PCI_IO_PHYS 0xE0300000 +#define CFG_PCI_IO_SIZE 0x100000 /* 1M */ + +#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE +#define CFG_PCI_SLV_MEM_BUS 0x00000000 +#define CFG_PCI_SLV_MEM_SIZE 0x80000000 + +#ifdef CONFIG_PCI +#define CONFIG_83XX_GENERIC_PCI 1 /* Use generic PCI setup */ +#define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */ + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ +#endif /* CONFIG_PCI */ + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* + * TSEC + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ +#define CFG_TSEC1_OFFSET 0x24000 +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) +#define CFG_TSEC2_OFFSET 0x25000 +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) + +/* + * TSEC ethernet configuration + */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC1" +#define TSEC1_PHY_ADDR 2 +#define TSEC2_PHY_ADDR 3 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "eTSEC1" + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_DATE + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS +#endif + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if defined(CONFIG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Cache Config + */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ +#endif + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CFG_SDRAM_LOWER CFG_SDRAM_BASE +#define CFG_SDRAM_UPPER (CFG_SDRAM_BASE + 0x10000000) + +#define CFG_IBAT0L (CFG_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +#define CFG_IBAT1L (CFG_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ +#define CFG_IBAT2L (CFG_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP) +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U + +/* BCSR: cache-inhibit and guarded */ +#define CFG_IBAT3L (CFG_BCSR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT3U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CFG_IBAT4L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT4U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_DBAT4L (CFG_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT4U CFG_IBAT4U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10) +#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U + +#ifdef CONFIG_PCI +/* PCI MEM space: cacheable */ +#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +/* PCI MMIO space: cache-inhibit and guarded */ +#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#else +#define CFG_IBAT6L (0) +#define CFG_IBAT6U (0) +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 +#define CONFIG_ETHADDR 00:E0:0C:00:83:79 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:E0:0C:00:83:78 +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=ramfs.83xx\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc837xemds.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + + +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h new file mode 100644 index 0000000..55df5aa --- /dev/null +++ b/include/configs/MPC8610HPCD.h @@ -0,0 +1,692 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +/* + * MPC8610HPCD board configuration file + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_MPC86xx 1 /* MPC86xx */ +#define CONFIG_MPC8610 1 /* MPC8610 specific */ +#define CONFIG_MPC8610HPCD 1 /* MPC8610HPCD board specific */ +#define CONFIG_NUM_CPUS 1 /* Number of CPUs in the system */ +#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ + +#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ + +/* video */ +#define CONFIG_VIDEO + +#if defined(CONFIG_VIDEO) +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#endif + +#ifdef RUN_DIAG +#define CFG_DIAG_ADDR 0xff800000 +#endif + +#define CFG_RESET_ADDRESS 0xfff00100 + +#define CONFIG_PCI 1 /* Enable PCI/PCIE*/ +#define CONFIG_PCI1 1 /* PCI controler 1 */ +#define CONFIG_PCIE1 1 /* PCIe 1 connected to ULI bridge */ +#define CONFIG_PCIE2 1 /* PCIe 2 connected to slot */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_SPD_EEPROM /* Use SPD for DDR */ +#undef CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ + +#define CONFIG_ALTIVEC 1 + +/* + * L2CR setup -- make sure this is right for your board! + */ +#define CFG_L2 +#define L2_INIT 0 +#define L2_ENABLE (L2CR_L2E |0x00100000 ) + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) +#endif + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_MISC_INIT_R 1 + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 +#define CFG_ALT_MEMTEST + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ +#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ + +#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) +#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000) +#define CFG_PCIE2_ADDR (CFG_CCSRBAR+0x9000) + +#define CFG_DIU_ADDR (CFG_CCSRBAR+0x2c000) + +/* + * DDR Setup + */ +#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CONFIG_VERY_BIG_RAM + +#define MPC86xx_DDR_SDRAM_CLK_CNTL + +#if defined(CONFIG_SPD_EEPROM) +/* + * Determine DDR configuration from I2C interface. + */ +#define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */ +#else +/* + * Manually set up DDR1 parameters + */ + +#define CFG_SDRAM_SIZE 256 /* DDR is 256MB */ + +#if 0 /* TODO */ +#define CFG_DDR_CS0_BNDS 0x0000000F +#define CFG_DDR_CS0_CONFIG 0x80010202 /* Enable, no interleaving */ +#define CFG_DDR_EXT_REFRESH 0x00000000 +#define CFG_DDR_TIMING_0 0x00260802 +#define CFG_DDR_TIMING_1 0x3935d322 +#define CFG_DDR_TIMING_2 0x14904cc8 +#define CFG_DDR_MODE_1 0x00480432 +#define CFG_DDR_MODE_2 0x00000000 +#define CFG_DDR_INTERVAL 0x06180100 +#define CFG_DDR_DATA_INIT 0xdeadbeef +#define CFG_DDR_CLK_CTRL 0x03800000 +#define CFG_DDR_OCD_CTRL 0x00000000 +#define CFG_DDR_OCD_STATUS 0x00000000 +#define CFG_DDR_CONTROL 0xe3008000 /* Type = DDR2 */ +#define CFG_DDR_CONTROL2 0x04400010 + +#define CFG_DDR_ERR_INT_EN 0x00000000 +#define CFG_DDR_ERR_DIS 0x00000000 +#define CFG_DDR_SBE 0x000f0000 + /* Not used in fixed_sdram function */ +#define CFG_DDR_MODE 0x00000022 +#define CFG_DDR_CS1_BNDS 0x00000000 +#define CFG_DDR_CS2_BNDS 0x00000FFF /* Not done */ +#define CFG_DDR_CS3_BNDS 0x00000FFF /* Not done */ +#define CFG_DDR_CS4_BNDS 0x00000FFF /* Not done */ +#define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */ +#endif +#endif + +#define CFG_ID_EEPROM +#define ID_EEPROM_ADDR 0x57 + + +#define CFG_FLASH_BASE 0xf0000000 /* start of FLASH 128M */ +#define CFG_FLASH_BASE2 0xf8000000 + +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2} + +#define CFG_BR0_PRELIM 0xf8001001 /* port size 16bit */ +#define CFG_OR0_PRELIM 0xf8006e65 /* 128MB NOR Flash*/ + +#define CFG_BR1_PRELIM 0xf0001001 /* port size 16bit */ +#define CFG_OR1_PRELIM 0xf8006e65 /* 128MB Promjet */ +#if 0 /* TODO */ +#define CFG_BR2_PRELIM 0xf0000000 +#define CFG_OR2_PRELIM 0xf0000000 /* 256MB NAND Flash - bank 1 */ +#endif +#define CFG_BR3_PRELIM 0xe8000801 /* port size 8bit */ +#define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ + + +#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ +#define PIXIS_BASE 0xe8000000 /* PIXIS registers */ +#define PIXIS_ID 0x0 /* Board ID at offset 0 */ +#define PIXIS_VER 0x1 /* Board version at offset 1 */ +#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ +#define PIXIS_RST 0x4 /* PIXIS Reset Control register */ +#define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch */ +#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ +#define PIXIS_BRDCFG0 0x8 /* PIXIS Board Configuration Register0*/ +#define PIXIS_VCTL 0x10 /* VELA Control Register */ +#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ +#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ +#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ +#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ +#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ +#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ +#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ +#define CFG_PIXIS_VBOOT_MASK 0x0C /* Reset altbank mask*/ + +#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ +#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_FLASH_EMPTY_INFO + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#if defined(CFG_RAMBOOT) +#undef CONFIG_SPD_EEPROM +#define CFG_SDRAM_SIZE 256 +#endif + +#undef CONFIG_CLOCKS_IN_MHZ + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#ifndef CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ +#else +#define CFG_INIT_RAM_ADDR 0xe4000000 /* Initial RAM address */ +#endif +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ +#define CFG_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* + * Pass open firmware flat tree to kernel + */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8610@0" +#define OF_SOC "soc@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc@e0000000/serial@4500" + +#define CFG_64BIT_VSPRINTF 1 +#define CFG_64BIT_STRTOUL 1 + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xe1000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ + +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 + +/* For RTL8139 */ +#define KSEG1ADDR(x) ({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); }) +#define _IO_BASE 0x00000000 + +/* controller 1, Base address 0xa000 */ +#define CFG_PCIE1_MEM_BASE 0xa0000000 +#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE +#define CFG_PCIE1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCIE1_IO_BASE 0x00000000 +#define CFG_PCIE1_IO_PHYS 0xe3000000 +#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */ + +/* controller 2, Base Address 0x9000 */ +#define CFG_PCIE2_MEM_BASE 0x90000000 +#define CFG_PCIE2_MEM_PHYS CFG_PCIE2_MEM_BASE +#define CFG_PCIE2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCIE2_IO_BASE 0x00000000 /* reuse mem LAW */ +#define CFG_PCIE2_IO_PHYS 0xe2000000 +#define CFG_PCIE2_IO_SIZE 0x00100000 /* 1M */ + + +#if defined(CONFIG_PCI) + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#define CONFIG_NET_MULTI +#define CONFIG_CMD_NET +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#define CONFIG_RTL8139 +#define CONFIG_SK98 +#define CONFIG_EEPRO100 +#define CONFIG_TULIP +#ifdef CONFIG_TULIP +#define CONFIG_ETHADDR 00:E0:0C:00:00:01 +#endif + +/************************************************************ + * USB support + ************************************************************/ +#define CONFIG_PCI_OHCI 1 +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_USB_KEYBOARD 1 +#define CFG_DEVICE_DEREGISTER +#define CFG_USB_EVENT_POLL 1 +#define CFG_USB_OHCI_SLOT_NAME "ohci_pci" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 +#define CFG_OHCI_SWAP_REG_ACCESS 1 + +#if !defined(CONFIG_PCI_PNP) +#define PCI_ENET0_IOADDR 0xe0000000 +#define PCI_ENET0_MEMADDR 0xe0000000 +#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ +#endif + +#define CONFIG_DOS_PARTITION +#define CONFIG_SCSI_AHCI + +#ifdef CONFIG_SCSI_AHCI +#define CONFIG_SATA_ULI5288 +#define CFG_SCSI_MAX_SCSI_ID 4 +#define CFG_SCSI_MAX_LUN 1 +#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) +#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE +#endif + +#endif /* CONFIG_PCI */ + +/* + * BAT0 2G Cacheable, non-guarded + * 0x0000_0000 2G DDR + */ +#define CFG_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) +#define CFG_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) +#define CFG_IBAT0U CFG_DBAT0U + +/* + * BAT1 1G Cache-inhibited, guarded + * 0x8000_0000 256M PCI-1 Memory + * 0xa000_0000 256M PCI-Express 1 Memory + * 0x9000_0000 256M PCI-Express 2 Memory + */ + +#define CFG_DBAT1L (CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CFG_DBAT1U (CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP) +#define CFG_IBAT1L (CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT1U CFG_DBAT1U + +/* + * BAT2 16M Cache-inhibited, guarded + * 0xe100_0000 1M PCI-1 I/O + */ + +#define CFG_DBAT2L (CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U (CFG_PCI1_IO_PHYS | BATU_BL_16M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT2U CFG_DBAT2U + +/* + * BAT3 32M Cache-inhibited, guarded + * 0xe200_0000 1M PCI-Express 2 I/O + * 0xe300_0000 1M PCI-Express 1 I/O + */ + +#define CFG_DBAT3L (CFG_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U (CFG_PCIE2_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT3L (CFG_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT3U CFG_DBAT3U + +/* + * BAT4 4M Cache-inhibited, guarded + * 0xe000_0000 4M CCSR + */ +#define CFG_DBAT4L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CFG_DBAT4U (CFG_CCSRBAR | BATU_BL_1M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT4U CFG_DBAT4U + +/* + * BAT5 128K Cacheable, non-guarded + * 0xe400_0000 128K Init RAM for stack in the CPU DCache (no backing memory) + */ +#define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_DBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_IBAT5L CFG_DBAT5L +#define CFG_IBAT5U CFG_DBAT5U + +/* + * BAT6 256M Cache-inhibited, guarded + * 0xf000_0000 256M FLASH + */ +#define CFG_DBAT6L (CFG_FLASH_BASE | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CFG_DBAT6U (CFG_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT6L (CFG_FLASH_BASE | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_IBAT6U CFG_DBAT6U + +/* + * BAT7 4M Cache-inhibited, guarded + * 0xe800_0000 4M PIXIS + */ +#define CFG_DBAT7L (PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CFG_DBAT7U (PIXIS_BASE | BATU_BL_1M | BATU_VS | BATU_VP) +#define CFG_IBAT7L (PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT7U CFG_DBAT7U + + +/* + * Environment + */ +#ifndef CFG_RAMBOOT +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_SECT_SIZE 0x20000 /* 126k (one sector) for env */ +#define CFG_ENV_SIZE 0x2000 +#else +#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) +#define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII + +#if defined(CFG_RAMBOOT) +#undef CONFIG_CMD_ENV +#endif + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SCSI +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_USB +#endif + + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/*DIU Configuration*/ +#define DIU_CONNECT_TO_DVI /* DIU controller connects to DVI encoder*/ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_IPADDR 192.168.1.100 + +#define CONFIG_HOSTNAME unknown +#define CONFIG_ROOTPATH /opt/nfsroot +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH 8610hpcd/u-boot.bin + +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.255.0 + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#if defined(CONFIG_PCI1) +#define PCI_ENV \ + "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ + "echo e;md ${a}e00 9\0" \ + "pci1regs=setenv a e0008; run pcireg\0" \ + "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ + "pci d.w $b.0 56 1\0" \ + "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \ + "pci w.w $b.0 56 ffff\0" \ + "pci1err=setenv a e0008; run pcierr\0" \ + "pci1errc=setenv a e0008; run pcierrc\0" +#else +#define PCI_ENV "" +#endif + +#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) +#define PCIE_ENV \ + "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \ + "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \ + "pcie1regs=setenv a e000a; run pciereg\0" \ + "pcie2regs=setenv a e0009; run pciereg\0" \ + "pcieerr=md ${a}020 1; md ${a}e00; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;"\ + "pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \ + "pci d $b.0 130 1\0" \ + "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;"\ + "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;" \ + "pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \ + "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \ + "pcie1err=setenv a e000a; run pcieerr\0" \ + "pcie2err=setenv a e0009; run pcieerr\0" \ + "pcie1errc=setenv a e000a; run pcieerrc\0" \ + "pcie2errc=setenv a e0009; run pcieerrc\0" +#else +#define PCIE_ENV "" +#endif + +#define DMA_ENV \ + "dma0=mw ${d}104 ffffffff;mw ${d}110 50000;mw ${d}114 $sad0;mw ${d}118 50000;"\ + "mw ${d}120 $bc0;mw ${d}100 f03c404; mw ${d}11c $dad0; md ${d}100 9\0" \ + "dma1=mw ${d}184 ffffffff;mw ${d}190 50000;mw ${d}194 $sad1;mw ${d}198 50000;"\ + "mw ${d}1a0 $bc1;mw ${d}180 f03c404; mw ${d}19c $dad1; md ${d}180 9\0" \ + "dma2=mw ${d}204 ffffffff;mw ${d}210 50000;mw ${d}214 $sad2;mw ${d}218 50000;"\ + "mw ${d}220 $bc2;mw ${d}200 f03c404; mw ${d}21c $dad2; md ${d}200 9\0" \ + "dma3=mw ${d}284 ffffffff;mw ${d}290 50000;mw ${d}294 $sad3;mw ${d}298 50000;"\ + "mw ${d}2a0 $bc3;mw ${d}280 f03c404; mw ${d}29c $dad3; md ${d}280 9\0" + +#ifdef ENV_DEBUG +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=8610hpcd/ramdisk.uboot\0" \ + "dtbaddr=c00000\0" \ + "dtbfile=8610hpcd/mpc8610_hpcd.dtb\0" \ + "bdev=sda3\0" \ + "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ + "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ + "maxcpus=1" \ + "eoi=mw e00400b0 0\0" \ + "iack=md e00400a0 1\0" \ + "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4;" \ + "md ${a}bf0 4; md ${a}e00 3; md ${a}e20 3; md ${a}e40 7;" \ + "md ${a}f00 5\0" \ + "ddr1regs=setenv a e0002; run ddrreg\0" \ + "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}800 1;" \ + "md ${a}900 6; md ${a}a00 1; md ${a}b20 3; md ${a}e00 1;" \ + "md ${a}e60 1; md ${a}ef0 1d\0" \ + "guregs=setenv a e00e0; run gureg\0" \ + "mcmreg=md ${a}000 1b; md ${a}bf8 2; md ${a}e00 5\0" \ + "mcmregs=setenv a e0001; run mcmreg\0" \ + "diuregs=md e002c000 1d\0" \ + "dium=mw e002c01c\0" \ + "diuerr=md e002c014 1\0" \ + "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 debug\0" \ + "monitor=0-DVI\0" \ + "pmregs=md e00e1000 2b\0" \ + "lawregs=md e0000c08 4b\0" \ + "lbcregs=md e0005000 36\0" \ + "dma0regs=md e0021100 12\0" \ + "dma1regs=md e0021180 12\0" \ + "dma2regs=md e0021200 12\0" \ + "dma3regs=md e0021280 12\0" \ + PCI_ENV \ + PCIE_ENV \ + DMA_ENV +#else +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=8610hpcd/ramdisk.uboot\0" \ + "dtbaddr=c00000\0" \ + "dtbfile=8610hpcd/mpc8610_hpcd.dtb\0" \ + "bdev=sda3\0" \ + "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0\0"\ + "monitor=0-DVI\0" +#endif + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr $ramdiskaddr $dtbaddr" + +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 6f87240..575bbae 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -38,7 +38,6 @@ #define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */ #define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */ #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ -#undef DEBUG #ifdef RUN_DIAG #define CFG_DIAG_ADDR 0xff800000 @@ -267,13 +266,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * Pass open firmware flat tree to kernel */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define OF_CPU "PowerPC,8641@0" -#define OF_SOC "soc8641@f8000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc8641@f8000000/serial@4500" #define CFG_64BIT_VSPRINTF 1 #define CFG_64BIT_STRTOUL 1 @@ -645,8 +641,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=your.ramdisk.u-boot\0" \ - "dtbaddr=c00000\0" \ - "dtbfile=mpc8641_hpcn.dtb\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=mpc8641_hpcn.dtb\0" \ "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ "maxcpus=2" @@ -658,16 +654,16 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr - $dtbaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr $ramdiskaddr $dtbaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 3d2ed1e..87fca3c 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -167,6 +167,7 @@ * set up. While still running from cache, I experienced problems accessing * the NAND controller. sr - 2006-08-25 */ +#if defined (CONFIG_NAND_U_BOOT) #define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ #define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ #define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */ @@ -195,6 +196,7 @@ #define CFG_NAND_OOBSIZE 16 #define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) #define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} +#endif #ifdef CFG_ENV_IS_IN_NAND /* @@ -501,6 +503,7 @@ #define NAND_MAX_CHIPS 1 #define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) #define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +#define CFG_NAND_QUIET_TEST 1 /* * Internal Definitions diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 7ecc275..9a0e9b8 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -131,6 +131,7 @@ /* USB */ #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) #define CONFIG_USB_OHCI_NEW +#define CFG_OHCI_BE_CONTROLLER #define CONFIG_USB_STORAGE #define CONFIG_CMD_FAT #define CONFIG_CMD_USB diff --git a/include/configs/alpr.h b/include/configs/alpr.h index aff9823..cfe08c8 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -296,7 +296,9 @@ /*----------------------------------------------------------------------- * FPGA stuff *-----------------------------------------------------------------------*/ -#define CONFIG_FPGA CFG_ALTERA_CYCLON2 +#define CONFIG_FPGA +#define CONFIG_FPGA_ALTERA +#define CONFIG_FPGA_CYCLON2 #define CFG_FPGA_CHECK_CTRLC #define CFG_FPGA_PROG_FEEDBACK #define CONFIG_FPGA_COUNT 1 /* Ich habe 2 ... aber in diff --git a/include/configs/apollon.h b/include/configs/apollon.h new file mode 100755 index 0000000..f101206 --- /dev/null +++ b/include/configs/apollon.h @@ -0,0 +1,238 @@ +/* + * (C) Copyright 2005-2007 + * Samsung Electronics, + * Kyungmin Park <kyungmin.park@samsung.com> + * + * Configuration settings for the 2420 Samsung Apollon board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP2420 1 /* which is in a 2420 */ +#define CONFIG_OMAP2420_APOLLON 1 +#define CONFIG_APOLLON 1 +#define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */ + +/* Clock config to target*/ +#define PRCM_CONFIG_I 1 +/* #define PRCM_CONFIG_II 1 */ + +/* Boot method */ +/* uncomment if you use NOR boot */ +/* #define CFG_NOR_BOOT 1 */ + +/* uncomment if you use NOR on CS3 */ +/* #define CFG_USE_NOR 1 */ + +#ifdef CFG_NOR_BOOT +#undef CFG_USE_NOR +#define CFG_USE_NOR 1 +#endif + +#include <asm/arch/omap2420.h> /* get chip and board defs */ + +#define V_SCLK 12000000 + +/* input clock of PLL */ +/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ +#define CONFIG_SYS_CLK_FREQ V_SCLK + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) +#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * SMC91c96 Etherent + */ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE (APOLLON_CS1_BASE+0x300) +#define CONFIG_LAN91C96_EXT_PHY + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ +#define CFG_NS16550_COM1 OMAP2420_UART1 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* UART1 on H4 */ + + /* + * I2C configuration + */ +#define CONFIG_HARD_I2C +#define CFG_I2C_SPEED 100000 +#define CFG_I2C_SLAVE 1 +#define CONFIG_DRIVER_OMAP24XX_I2C + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ONENAND + +#undef CONFIG_CMD_AUTOSCRIPT + +#ifndef CFG_USE_NOR +# undef CONFIG_CMD_FLASH +# undef CONFIG_CMD_IMLS +#endif + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +#define CONFIG_BOOTDELAY 1 + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.116.25 +#define CONFIG_SERVERIP 192.168.116.1 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_ETHADDR 00:0E:99:00:24:20 + +#ifdef CONFIG_APOLLON_PLUS +# define CONFIG_BOOTARGS "root=/dev/nfs rw mem=64M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2" +#else +# define CONFIG_BOOTARGS "root=/dev/nfs rw mem=128M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "Image=tftp 0x80008000 Image; go 0x80008000\0" \ + "zImage=tftp 0x80180000 zImage; go 0x80180000\0" \ + "uImage=tftp 0x80180000 uImage; bootm 0x80180000\0" \ + "uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0" \ + "xloader=tftp 0x80180000 x-load.bin; cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0" \ + "syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0" \ + "syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0" \ + "norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0" \ + "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0"\ + "onesyncboot=run syncmode oneboot\0" \ + "bootcmd=run uboot\0" + +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "Apollon # " + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT V_PROMPT +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ +#define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ + +/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) + * or by 32KHz clk, or from external sig. This rate is divided by a local + * divisor. + */ +#define V_PVT 7 /* use with 12MHz/128 */ + +#define CFG_TIMERBASE OMAP2420_GPT2 +#define CFG_PVT V_PVT /* 2^(pvt+1) */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +# define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +# define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_128M +#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#ifdef CFG_USE_NOR +/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */ +# define CFG_FLASH_BASE 0x18000000 +# define CFG_MAX_FLASH_BANKS 1 +# define CFG_MAX_FLASH_SECT 1024 +/*----------------------------------------------------------------------- + + * CFI FLASH driver setup + */ +# define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +# define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */ +# define CFG_FLASH_PROTECTION 1 /* Use h/w sector protection*/ + +#else /* !CFG_USE_NOR */ +# define CFG_NO_FLASH 1 +#endif /* CFG_USE_NOR */ + +/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */ +#define CFG_ONENAND_BASE 0x00000000 +#define CFG_ENV_IS_IN_ONENAND 1 +#define CFG_ENV_ADDR 0x00020000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 0fac28f..206007d 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -142,7 +142,7 @@ "cp.l 100000 f0000b28 1\0" \ "ideargs=setenv bootargs root=/dev/hda1 rw\0" \ "ide_boot=ext2load ide 0:1 200000 uImage;" \ - "run ideargs addip addcons enable_disp;bootm" \ + "run ideargs addip addcons enable_disp;bootm\0" \ "brightness=255\0" \ "" @@ -156,24 +156,24 @@ /* * Flash configuration */ -#define CFG_FLASH_BASE 0xFFE00000 - -#define CFG_FLASH_SIZE 0x00200000 /* 2 MByte */ -#define CFG_MAX_FLASH_SECT 35 /* max num of sects on one chip */ - -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) /* second sector */ -#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks - (= chip selects) */ -#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_BASE 0xffe00000 +#define CFG_FLASH_SIZE 0x00200000 +#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ /* * Environment settings */ #define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_SECT_SIZE 0x2000 #define CONFIG_ENV_OVERWRITE 1 +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /* * Memory map @@ -182,7 +182,14 @@ #define CFG_SDRAM_BASE 0x00000000 #define CFG_DEFAULT_MBAR 0x80000000 -#define CONFIG_MPC5200_DDR +/* + * SDRAM controller configuration + */ +#undef CONFIG_SDR_MT48LC16M16A2 +#undef CONFIG_DDR_MT46V16M16 +#undef CONFIG_DDR_MT46V32M16 +#undef CONFIG_DDR_HYB25D512160BF +#define CONFIG_DDR_K4H511638C /* Use ON-Chip SRAM until RAM will be available */ #define CFG_INIT_RAM_ADDR MPC5XXX_SRAM @@ -203,7 +210,7 @@ # define CFG_RAMBOOT 1 #endif -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 0aa4f2d..78c794a 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -111,6 +111,7 @@ #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses*/ #define CONFIG_DDR_ECC 1 /* with ECC support */ +#define CONFIG_DDR_RQDC_FIXED 0x80000038 /* optimal value found by GDA*/ #undef CONFIG_STRESS /*----------------------------------------------------------------------- diff --git a/include/configs/korat.h b/include/configs/korat.h index 1ea7d48..7d0640b 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Larry Johnson, lrj@acm.org * * (C) Copyright 2006-2007 @@ -361,6 +361,157 @@ #define CFG_EBC_PB2AP 0x04017300 #define CFG_EBC_PB2CR (CFG_CPLD_BASE | 0x00038000) +/*----------------------------------------------------------------------- + * GPIO Setup + * + * Korat GPIO usage: + * + * Init. + * Pin Source I/O value Function + * ------ ------ --- ----- --------------------------------- + * GPIO00 Alt1 I/O x PerAddr07 + * GPIO01 Alt1 I/O x PerAddr06 + * GPIO02 Alt1 I/O x PerAddr05 + * GPIO03 GPIO x x GPIO03 to expansion bus connector + * GPIO04 GPIO x x GPIO04 to expansion bus connector + * GPIO05 GPIO x x GPIO05 to expansion bus connector + * GPIO06 Alt1 O x PerCS1 (2nd NOR flash) + * GPIO07 Alt1 O x PerCS2 (CPLD) + * GPIO08 Alt1 O x PerCS3 to expansion bus connector + * GPIO09 Alt1 O x PerCS4 to expansion bus connector + * GPIO10 Alt1 O x PerCS5 to expansion bus connector + * GPIO11 Alt1 I x PerErr + * GPIO12 GPIO O 0 ATMega !Reset + * GPIO13 GPIO O 1 SPI Atmega !SS + * GPIO14 GPIO O 1 Write protect EEPROM #1 (0xA8) + * GPIO15 GPIO O 0 CPU Run LED !On + * GPIO16 Alt1 O x GMC1TxD0 + * GPIO17 Alt1 O x GMC1TxD1 + * GPIO18 Alt1 O x GMC1TxD2 + * GPIO19 Alt1 O x GMC1TxD3 + * GPIO20 Alt1 I x RejectPkt0 + * GPIO21 Alt1 I x RejectPkt1 + * GPIO22 GPIO I x PGOOD_DDR + * GPIO23 Alt1 O x SCPD0 + * GPIO24 Alt1 O x GMC0TxD2 + * GPIO25 Alt1 O x GMC0TxD3 + * GPIO26 GPIO? I/O x IIC0SDA (selected in SDR0_PFC4) + * GPIO27 GPIO O 0 PHY #0 1000BASE-X select + * GPIO28 GPIO O 0 PHY #1 1000BASE-X select + * GPIO29 GPIO I x Test jumper !Present + * GPIO30 GPIO I x SFP module #0 !Present + * GPIO31 GPIO I x SFP module #1 !Present + * + * GPIO32 GPIO O 1 SFP module #0 Tx !Enable + * GPIO33 GPIO O 1 SFP module #1 Tx !Enable + * GPIO34 Alt2 I x !UART1_CTS + * GPIO35 Alt2 O x !UART1_RTS + * GPIO36 Alt1 I x !UART0_CTS + * GPIO37 Alt1 O x !UART0_RTS + * GPIO38 Alt2 O x UART1_Tx + * GPIO39 Alt2 I x UART1_Rx + * GPIO40 Alt1 I x IRQ0 (Ethernet 0) + * GPIO41 Alt1 I x IRQ1 (Ethernet 1) + * GPIO42 Alt1 I x IRQ2 (PCI interrupt) + * GPIO43 Alt1 I x IRQ3 (System Alert from CPLD) + * GPIO44 xxxx x x (grounded through pulldown) + * GPIO45 GPIO O 0 PHY #0 Enable + * GPIO46 GPIO O 0 PHY #1 Enable + * GPIO47 GPIO I x Reset switch !Pressed + * GPIO48 GPIO I x Shutdown switch !Pressed + * GPIO49 xxxx x x (reserved for trace port) + * . . . . . + * . . . . . + * . . . . . + * GPIO63 xxxx x x (reserved for trace port) +*----------------------------------------------------------------------*/ + +#define CFG_GPIO_ATMEGA_SS_ 13 +#define CFG_GPIO_PHY0_FIBER_SEL 27 +#define CFG_GPIO_PHY1_FIBER_SEL 28 +#define CFG_GPIO_SFP0_PRESENT_ 30 +#define CFG_GPIO_SFP1_PRESENT_ 31 +#define CFG_GPIO_SFP0_TX_EN_ 32 +#define CFG_GPIO_SFP1_TX_EN_ 33 +#define CFG_GPIO_PHY0_EN 45 +#define CFG_GPIO_PHY1_EN 46 + +/*----------------------------------------------------------------------- + * PPC440 GPIO Configuration + */ +#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ +{ \ +/* GPIO Core 0 */ \ +{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ +{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ +{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ +{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ +{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ +{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO13 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ +}, \ +{ \ +/* GPIO Core 1 */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ +} \ +} + /* * Internal Definitions * diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 5210024..0bf536b 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -71,15 +71,20 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer *----------------------------------------------------------------------*/ -/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ -#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ -#define CFG_OCM_DATA_ADDR CFG_OCM_BASE - +/* + * On LWMON5 we use D-cache as init-ram and stack pointer. We also move + * the POST_WORD from OCM to a 440EPx register that preserves it's + * content during reset (GPT0_COM6). This way we reserve the OCM (16k) + * for logbuffer only. + */ +#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ +#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (4 << 10) -#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) -#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6) + /* unused GPT0 COMP reg */ /*----------------------------------------------------------------------- * Serial Port diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index e7d8a5a..9efe3c4 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -310,13 +310,9 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8349@0" -#define OF_SOC "soc8349@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ @@ -458,7 +454,7 @@ #define CONFIG_CMD_PING #if defined(CONFIG_PCI) - #define CONFG_CMD_PCI + #define CONFIG_CMD_PCI #endif #if defined(CFG_RAMBOOT) diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 1f72b54..8929134 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -476,6 +476,83 @@ #define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) #define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +/*----------------------------------------------------------------------- + * PPC440 GPIO Configuration + */ +/* test-only: take GPIO init from pcs440ep ???? in config file */ +#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ +{ \ +/* GPIO Core 0 */ \ +{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ +{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO14 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO23 SCPD0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO28 USB2D_TXVALID */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ +}, \ +{ \ +/* GPIO Core 1 */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \ +{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ +} \ +} + /* * Internal Definitions * diff --git a/include/fdt_support.h b/include/fdt_support.h index 3d6c1a8..58e26ab 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -46,6 +46,8 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat, const char *prop, u32 val, int create); int fdt_fixup_memory(void *blob, u64 start, u64 size); void fdt_fixup_ethernet(void *fdt, bd_t *bd); +int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, + const void *val, int len, int create); #ifdef CONFIG_OF_HAS_UBOOT_ENV int fdt_env(void *fdt); diff --git a/include/libfdt.h b/include/libfdt.h index 8050049..6c05236 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -655,8 +655,65 @@ int fdt_node_offset_by_compatible(const void *fdt, int startoffset, /* Write-in-place functions */ /**********************************************************************/ +/** + * fdt_setprop_inplace - change a property's value, but not its size + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to replace the property value with + * @len: length of the property value + * + * fdt_setprop_inplace() replaces the value of a given property with + * the data in val, of length len. This function cannot change the + * size of a property, and so will only work if len is equal to the + * current length of the property. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if len is not equal to the property's current length + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, const void *val, int len); + +/** + * fdt_setprop_inplace_cell - change the value of a single-cell property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: cell (32-bit integer) value to replace the property with + * + * fdt_setprop_inplace_cell() replaces the value of a given property + * with the 32-bit integer cell value in val, converting val to + * big-endian if necessary. This function cannot change the size of a + * property, and so will only work if the property already exists and + * has length 4. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, const char *name, uint32_t val) { @@ -664,7 +721,54 @@ static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); } +/** + * fdt_nop_property - replace a property with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_nop_property() will replace a given property's representation + * in the blob with FDT_NOP tags, effectively removing it from the + * tree. + * + * This function will alter only the bytes in the blob which contain + * the property, and will not alter or move any other part of the + * tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ int fdt_nop_property(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_nop_node - replace a node (subtree) with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_nop_node() will replace a given node's representation in the + * blob, including all its subnodes, if any, with FDT_NOP tags, + * effectively removing it from the tree. + * + * This function will alter only the bytes in the blob which contain + * the node and its properties and subnodes, and will not alter or + * move any other part of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ int fdt_nop_node(void *fdt, int nodeoffset); /**********************************************************************/ @@ -693,23 +797,242 @@ int fdt_finish(void *fdt); int fdt_open_into(const void *fdt, void *buf, int bufsize); int fdt_pack(void *fdt); +/** + * fdt_add_mem_rsv - add one memory reserve map entry + * @fdt: pointer to the device tree blob + * @addres, @size: 64-bit values (native endian) + * + * Adds a reserve map entry to the given blob reserving a region at + * address address of length size. + * + * This function will insert data into the reserve map and will + * therfore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new reservation entry + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); + +/** + * fdt_del_mem_rsv - remove a memory reserve map entry + * @fdt: pointer to the device tree blob + * @n: entry to remove + * + * fdt_del_mem_rsv() removes the n-th memory reserve map entry from + * the blob. + * + * This function will delete data from the reservation table and will + * therfore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there + * are less than n+1 reserve map entries) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ int fdt_del_mem_rsv(void *fdt, int n); +/** + * fdt_setprop - create or change a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to set the property value to + * @len: length of the property value + * + * fdt_setprop() sets the value of the named property in the given + * node to the given value and length, creeating the property if it + * does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ int fdt_setprop(void *fdt, int nodeoffset, const char *name, const void *val, int len); + +/** + * fdt_setprop_cell - set a property to a single cell value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value for the property (native endian) + * + * fdt_setprop_cell() sets the value of the named property in the + * given node to the given cell value (converting to big-endian if + * necessary), or creates a new property with that value if it does + * not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, uint32_t val) { val = cpu_to_fdt32(val); return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); } + +/** + * fdt_setprop_string - set a property to a string value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @str: string value for the property + * + * fdt_setprop_string() sets the value of the named property in the + * given node to the given string value (using the length of the + * string to determine the new length of the property), or creates a + * new property with that value if it does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ #define fdt_setprop_string(fdt, nodeoffset, name, str) \ fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) + +/** + * fdt_delprop - delete a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_del_property() will delete the given property. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ int fdt_delprop(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_add_subnode_namelen - creates a new node based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_add_subnode(), but use only the first namelen + * characters of name as the name of the new node. This is useful for + * creating subnodes based on a portion of a larger string, such as a + * full path. + */ int fdt_add_subnode_namelen(void *fdt, int parentoffset, const char *name, int namelen); + +/** + * fdt_add_subnode - creates a new node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_add_subnode() creates a new node as a subnode of the node at + * structure block offset parentoffset, with the given name (which + * should include the unit address, if any). + * + * This function will insert data into the blob, and will therefore + * change the offsets of some existing nodes. + + * returns: + * structure block offset of the created nodeequested subnode (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag + * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of + * the given name + * -FDT_ERR_NOSPACE, if there is insufficient free space in the + * blob to contain the new node + * -FDT_ERR_NOSPACE + * -FDT_ERR_BADLAYOUT + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ int fdt_add_subnode(void *fdt, int parentoffset, const char *name); + +/** + * fdt_del_node - delete a node (subtree) + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_del_node() will remove the given node, including all its + * subnodes if any, from the blob. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ int fdt_del_node(void *fdt, int nodeoffset); /**********************************************************************/ diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 4d32c6a..dba1aea 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -98,10 +98,21 @@ #define SPR_8321E_REV11 0x80660011 #define SPR_8321_REV11 0x80670011 -#define SPR_8311_REV10 0x80B30010 -#define SPR_8311E_REV10 0x80B20010 -#define SPR_8313_REV10 0x80B10010 #define SPR_8313E_REV10 0x80B00010 +#define SPR_8313_REV10 0x80B10010 +#define SPR_8311E_REV10 0x80B20010 +#define SPR_8311_REV10 0x80B30010 +#define SPR_8315E_REV10 0x80B40010 +#define SPR_8315_REV10 0x80B50010 +#define SPR_8314E_REV10 0x80B60010 +#define SPR_8314_REV10 0x80B70010 + +#define SPR_8379E_REV10 0x80C20010 +#define SPR_8379_REV10 0x80C30010 +#define SPR_8378E_REV10 0x80C40010 +#define SPR_8378_REV10 0x80C50010 +#define SPR_8377E_REV10 0x80C60010 +#define SPR_8377_REV10 0x80C70010 /* SPCR - System Priority Configuration Register */ @@ -130,8 +141,8 @@ #define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */ #define SPCR_TSEC2EP_SHIFT (31-31) -#elif defined(CONFIG_MPC831X) -/* SPCR bits - MPC831x specific */ +#elif defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X) +/* SPCR bits - MPC831x and MPC837x specific */ #define SPCR_TSECDP 0x00003000 /* TSEC data priority */ #define SPCR_TSECDP_SHIFT (31-19) #define SPCR_TSECEP 0x00000C00 /* TSEC emergency priority */ @@ -213,8 +224,8 @@ #define SICRL_URT_CTPR 0x06000000 #define SICRL_IRQ_CTPR 0x00C00000 -#elif defined(CONFIG_MPC831X) -/* SICRL bits - MPC831x specific */ +#elif defined(CONFIG_MPC8313) +/* SICRL bits - MPC8313 specific */ #define SICRL_LBC 0x30000000 #define SICRL_UART 0x0C000000 #define SICRL_SPI_A 0x03000000 @@ -225,7 +236,7 @@ #define SICRL_ETSEC1_A 0x0000000C #define SICRL_ETSEC2_A 0x00000003 -/* SICRH bits - MPC831x specific */ +/* SICRH bits - MPC8313 specific */ #define SICRH_INTR_A 0x02000000 #define SICRH_INTR_B 0x00C00000 #define SICRH_IIC 0x00300000 @@ -242,6 +253,90 @@ #define SICRH_TSOBI1 0x00000002 #define SICRH_TSOBI2 0x00000001 +#elif defined(CONFIG_MPC8315) +/* SICRL bits - MPC8315 specific */ +#define SICRL_DMA_CH0 0xc0000000 +#define SICRL_DMA_SPI 0x30000000 +#define SICRL_UART 0x0c000000 +#define SICRL_IRQ4 0x02000000 +#define SICRL_IRQ5 0x01800000 +#define SICRL_IRQ6_7 0x00400000 +#define SICRL_IIC1 0x00300000 +#define SICRL_TDM 0x000c0000 +#define SICRL_TDM_SHARED 0x00030000 +#define SICRL_PCI_A 0x0000c000 +#define SICRL_ELBC_A 0x00003000 +#define SICRL_ETSEC1_A 0x000000c0 +#define SICRL_ETSEC1_B 0x00000030 +#define SICRL_ETSEC1_C 0x0000000c +#define SICRL_TSEXPOBI 0x00000001 + +/* SICRH bits - MPC8315 specific */ +#define SICRH_GPIO_0 0xc0000000 +#define SICRH_GPIO_1 0x30000000 +#define SICRH_GPIO_2 0x0c000000 +#define SICRH_GPIO_3 0x03000000 +#define SICRH_GPIO_4 0x00c00000 +#define SICRH_GPIO_5 0x00300000 +#define SICRH_GPIO_6 0x000c0000 +#define SICRH_GPIO_7 0x00030000 +#define SICRH_GPIO_8 0x0000c000 +#define SICRH_GPIO_9 0x00003000 +#define SICRH_GPIO_10 0x00000c00 +#define SICRH_GPIO_11 0x00000300 +#define SICRH_ETSEC2_A 0x000000c0 +#define SICRH_TSOBI1 0x00000002 +#define SICRH_TSOBI2 0x00000001 + +#elif defined(CONFIG_MPC837X) +/* SICRL bits - MPC837x specific */ +#define SICRL_USB_A 0xC0000000 +#define SICRL_USB_B 0x30000000 +#define SICRL_UART 0x0C000000 +#define SICRL_GPIO_A 0x02000000 +#define SICRL_GPIO_B 0x01000000 +#define SICRL_GPIO_C 0x00800000 +#define SICRL_GPIO_D 0x00400000 +#define SICRL_GPIO_E 0x00200000 +#define SICRL_GPIO_F 0x00180000 +#define SICRL_GPIO_G 0x00040000 +#define SICRL_GPIO_H 0x00020000 +#define SICRL_GPIO_I 0x00010000 +#define SICRL_GPIO_J 0x00008000 +#define SICRL_GPIO_K 0x00004000 +#define SICRL_GPIO_L 0x00003000 +#define SICRL_DMA_A 0x00000800 +#define SICRL_DMA_B 0x00000400 +#define SICRL_DMA_C 0x00000200 +#define SICRL_DMA_D 0x00000100 +#define SICRL_DMA_E 0x00000080 +#define SICRL_DMA_F 0x00000040 +#define SICRL_DMA_G 0x00000020 +#define SICRL_DMA_H 0x00000010 +#define SICRL_DMA_I 0x00000008 +#define SICRL_DMA_J 0x00000004 +#define SICRL_LDP_A 0x00000002 +#define SICRL_LDP_B 0x00000001 + +/* SICRH bits - MPC837x specific */ +#define SICRH_DDR 0x80000000 +#define SICRH_TSEC1_A 0x10000000 +#define SICRH_TSEC1_B 0x08000000 +#define SICRH_TSEC2_A 0x00400000 +#define SICRH_TSEC2_B 0x00200000 +#define SICRH_TSEC2_C 0x00100000 +#define SICRH_TSEC2_D 0x00080000 +#define SICRH_TSEC2_E 0x00040000 +#define SICRH_TMR 0x00010000 +#define SICRH_GPIO2_A 0x00008000 +#define SICRH_GPIO2_B 0x00004000 +#define SICRH_GPIO2_C 0x00002000 +#define SICRH_GPIO2_D 0x00001000 +#define SICRH_GPIO2_E 0x00000C00 +#define SICRH_GPIO2_F 0x00000300 +#define SICRH_GPIO2_G 0x000000C0 +#define SICRH_GPIO2_H 0x00000030 +#define SICRH_SPI 0x00000003 #endif /* SWCRR - System Watchdog Control Register @@ -390,6 +485,14 @@ #define HRCWL_CE_TO_PLL_1X29 0x0000001D #define HRCWL_CE_TO_PLL_1X30 0x0000001E #define HRCWL_CE_TO_PLL_1X31 0x0000001F + +#elif defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315) +#define HRCWL_SVCOD 0x30000000 +#define HRCWL_SVCOD_SHIFT 28 +#define HRCWL_SVCOD_DIV_4 0x00000000 +#define HRCWL_SVCOD_DIV_8 0x10000000 +#define HRCWL_SVCOD_DIV_2 0x20000000 +#define HRCWL_SVCOD_DIV_1 0x30000000 #endif /* HRCWH - Hardware Reset Configuration Word High @@ -436,11 +539,14 @@ #if defined(CONFIG_MPC834X) #define HRCWH_ROM_LOC_PCI2 0x00200000 #endif +#if defined(CONIFG_MPC837X) +#define HRCWH_ROM_LOC_ON_CHIP_ROM 0x00300000 +#endif #define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000 #define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 #define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 -#if defined(CONFIG_MPC831X) +#if defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X) #define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000 #define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000 #define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000 @@ -489,8 +595,13 @@ /* RSR - Reset Status Register */ +#if defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X) +#define RSR_RSTSRC 0xF0000000 /* Reset source */ +#define RSR_RSTSRC_SHIFT 28 +#else #define RSR_RSTSRC 0xE0000000 /* Reset source */ #define RSR_RSTSRC_SHIFT 29 +#endif #define RSR_BSF 0x00010000 /* Boot seq. fail */ #define RSR_BSF_SHIFT 16 #define RSR_SWSR 0x00002000 /* software soft reset */ @@ -577,8 +688,8 @@ #define SCCR_PCICM 0x00010000 #define SCCR_PCICM_SHIFT 16 -/* SCCR bits - MPC8349 specific */ -#ifdef CONFIG_MPC834X +#if defined(CONFIG_MPC834X) +/* SCCR bits - MPC834x specific */ #define SCCR_TSEC1CM 0xc0000000 #define SCCR_TSEC1CM_SHIFT 30 #define SCCR_TSEC1CM_0 0x00000000 @@ -593,7 +704,19 @@ #define SCCR_TSEC2CM_2 0x20000000 #define SCCR_TSEC2CM_3 0x30000000 -#elif defined(CONFIG_MPC831X) +/* The MPH must have the same clock ratio as DR, unless its clock disabled */ +#define SCCR_USBMPHCM 0x00c00000 +#define SCCR_USBMPHCM_SHIFT 22 +#define SCCR_USBDRCM 0x00300000 +#define SCCR_USBDRCM_SHIFT 20 +#define SCCR_USBCM 0x00f00000 +#define SCCR_USBCM_SHIFT 20 +#define SCCR_USBCM_0 0x00000000 +#define SCCR_USBCM_1 0x00500000 +#define SCCR_USBCM_2 0x00A00000 +#define SCCR_USBCM_3 0x00F00000 + +#elif defined(CONFIG_MPC8313) /* TSEC1 bits are for TSEC2 as well */ #define SCCR_TSEC1CM 0xc0000000 #define SCCR_TSEC1CM_SHIFT 30 @@ -606,17 +729,109 @@ #define SCCR_TSEC2ON 0x10000000 #define SCCR_TSEC2ON_SHIFT 28 -#endif +#define SCCR_USBDRCM 0x00300000 +#define SCCR_USBDRCM_SHIFT 20 +#define SCCR_USBDRCM_0 0x00000000 +#define SCCR_USBDRCM_1 0x00100000 +#define SCCR_USBDRCM_2 0x00200000 +#define SCCR_USBDRCM_3 0x00300000 + +#elif defined(CONFIG_MPC8315) +/* SCCR bits - MPC8315 specific */ +#define SCCR_TSEC1CM 0xc0000000 +#define SCCR_TSEC1CM_SHIFT 30 +#define SCCR_TSEC1CM_0 0x00000000 +#define SCCR_TSEC1CM_1 0x40000000 +#define SCCR_TSEC1CM_2 0x80000000 +#define SCCR_TSEC1CM_3 0xC0000000 + +#define SCCR_TSEC2CM 0x30000000 +#define SCCR_TSEC2CM_SHIFT 28 +#define SCCR_TSEC2CM_0 0x00000000 +#define SCCR_TSEC2CM_1 0x10000000 +#define SCCR_TSEC2CM_2 0x20000000 +#define SCCR_TSEC2CM_3 0x30000000 -#define SCCR_USBMPHCM 0x00c00000 -#define SCCR_USBMPHCM_SHIFT 22 #define SCCR_USBDRCM 0x00300000 #define SCCR_USBDRCM_SHIFT 20 +#define SCCR_USBDRCM_0 0x00000000 +#define SCCR_USBDRCM_1 0x00100000 +#define SCCR_USBDRCM_2 0x00200000 +#define SCCR_USBDRCM_3 0x00300000 + +#define SCCR_PCIEXP1CM 0x00080000 +#define SCCR_PCIEXP2CM 0x00040000 + +#define SCCR_SATA1CM 0x0000c000 +#define SCCR_SATA1CM_SHIFT 14 +#define SCCR_SATACM 0x0000f000 +#define SCCR_SATACM_SHIFT 8 +#define SCCR_SATACM_0 0x00000000 +#define SCCR_SATACM_1 0x00005000 +#define SCCR_SATACM_2 0x0000a000 +#define SCCR_SATACM_3 0x0000f000 + +#define SCCR_TDMCM 0x000000c0 +#define SCCR_TDMCM_SHIFT 6 +#define SCCR_TDMCM_0 0x00000000 +#define SCCR_TDMCM_1 0x00000040 +#define SCCR_TDMCM_2 0x00000080 +#define SCCR_TDMCM_3 0x000000c0 + +#elif defined(CONFIG_MPC837X) +/* SCCR bits - MPC837x specific */ +#define SCCR_TSEC1CM 0xc0000000 +#define SCCR_TSEC1CM_SHIFT 30 +#define SCCR_TSEC1CM_0 0x00000000 +#define SCCR_TSEC1CM_1 0x40000000 +#define SCCR_TSEC1CM_2 0x80000000 +#define SCCR_TSEC1CM_3 0xC0000000 -#define SCCR_USBCM_0 0x00000000 -#define SCCR_USBCM_1 0x00500000 -#define SCCR_USBCM_2 0x00A00000 -#define SCCR_USBCM_3 0x00F00000 +#define SCCR_TSEC2CM 0x30000000 +#define SCCR_TSEC2CM_SHIFT 28 +#define SCCR_TSEC2CM_0 0x00000000 +#define SCCR_TSEC2CM_1 0x10000000 +#define SCCR_TSEC2CM_2 0x20000000 +#define SCCR_TSEC2CM_3 0x30000000 + +#define SCCR_SDHCCM 0x0c000000 +#define SCCR_SDHCCM_SHIFT 26 +#define SCCR_SDHCCM_0 0x00000000 +#define SCCR_SDHCCM_1 0x04000000 +#define SCCR_SDHCCM_2 0x08000000 +#define SCCR_SDHCCM_3 0x0c000000 + +#define SCCR_USBDRCM 0x00c00000 +#define SCCR_USBDRCM_SHIFT 22 +#define SCCR_USBDRCM_0 0x00000000 +#define SCCR_USBDRCM_1 0x00400000 +#define SCCR_USBDRCM_2 0x00800000 +#define SCCR_USBDRCM_3 0x00c00000 + +#define SCCR_PCIEXP1CM 0x00300000 +#define SCCR_PCIEXP1CM_SHIFT 20 +#define SCCR_PCIEXP1CM_0 0x00000000 +#define SCCR_PCIEXP1CM_1 0x00100000 +#define SCCR_PCIEXP1CM_2 0x00200000 +#define SCCR_PCIEXP1CM_3 0x00300000 + +#define SCCR_PCIEXP2CM 0x000c0000 +#define SCCR_PCIEXP2CM_SHIFT 18 +#define SCCR_PCIEXP2CM_0 0x00000000 +#define SCCR_PCIEXP2CM_1 0x00040000 +#define SCCR_PCIEXP2CM_2 0x00080000 +#define SCCR_PCIEXP2CM_3 0x000c0000 + +/* All of the four SATA controllers must have the same clock ratio */ +#define SCCR_SATA1CM 0x000000c0 +#define SCCR_SATA1CM_SHIFT 6 +#define SCCR_SATACM 0x000000ff +#define SCCR_SATACM_SHIFT 0 +#define SCCR_SATACM_0 0x00000000 +#define SCCR_SATACM_1 0x00000055 +#define SCCR_SATACM_2 0x000000aa +#define SCCR_SATACM_3 0x000000ff +#endif /* CSn_BDNS - Chip Select memory Bounds Register */ @@ -860,7 +1075,7 @@ #define BR_MS_UPMA 0x00000080 /* UPMA */ #define BR_MS_UPMB 0x000000A0 /* UPMB */ #define BR_MS_UPMC 0x000000C0 /* UPMC */ -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) +#if !defined(CONFIG_MPC834X) #define BR_ATOM 0x0000000C #define BR_ATOM_SHIFT 2 #endif @@ -869,7 +1084,7 @@ #if defined(CONFIG_MPC834X) #define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V) -#elif defined(CONFIG_MPC8360) +#else #define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V) #endif @@ -1255,7 +1470,7 @@ #define LTESR_CS 0x00080000 #define LTESR_CC 0x00000001 -/* DDR Control Driver Register +/* DDRCDR - DDR Control Driver Register */ #define DDRCDR_EN 0x40000000 #define DDRCDR_PZ 0x3C000000 diff --git a/include/net.h b/include/net.h index 603452a..f6decdc 100644 --- a/include/net.h +++ b/include/net.h @@ -122,6 +122,9 @@ extern void eth_set_enetaddr(int num, char* a); /* Set new MAC address */ extern int eth_init(bd_t *bis); /* Initialize the device */ extern int eth_send(volatile void *packet, int length); /* Send a packet */ +#ifdef CONFIG_API +extern int eth_receive(volatile void *packet, int length); /* Receive a packet */ +#endif extern int eth_rx(void); /* Check for received packets */ extern void eth_halt(void); /* stop SCC */ extern char *eth_get_name(void); /* get name of current device */ diff --git a/include/ppc440.h b/include/ppc440.h index 90e56b0..907744b 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -492,6 +492,7 @@ #define SDRAM_ECCCR 0x98 /* ECC error status */ #define SDRAM_CID 0xA4 /* core ID */ #define SDRAM_RID 0xA8 /* revision ID */ +#define SDRAM_RTSR 0xB1 /* run time status tracking */ /*-----------------------------------------------------------------------------+ | Memory Controller Status @@ -605,8 +606,8 @@ #define SDRAM_RFDC_ARSE_ENABLE 0x00000000 #define SDRAM_RFDC_RFOS_MASK 0x007F0000 #define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) -#define SDRAM_RFDC_RFFD_MASK 0x000003FF -#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define SDRAM_RFDC_RFFD_MASK 0x000007FF +#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x7FF)<<0) #define SDRAM_RFDC_RFFD_MAX 0x7FF @@ -690,6 +691,7 @@ #define SDRAM_CLKTR_CLKP_MASK 0xC0000000 #define SDRAM_CLKTR_CLKP_0_DEG 0x00000000 #define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000 +#define SDRAM_CLKTR_CLKP_90_DEG_ADV 0x40000000 /*-----------------------------------------------------------------------------+ | SDRAM Write Timing Register @@ -790,6 +792,12 @@ #define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */ #define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */ +#define SDRAM_RTSR_TRK1SM_MASK 0xC0000000 /* Tracking State Mach 1*/ +#define SDRAM_RTSR_TRK1SM_ATBASE 0x00000000 /* atbase state */ +#define SDRAM_RTSR_TRK1SM_MISSED 0x40000000 /* missed state */ +#define SDRAM_RTSR_TRK1SM_ATPLS1 0x80000000 /* atpls1 state */ +#define SDRAM_RTSR_TRK1SM_RESET 0xC0000000 /* reset state */ + #define SDR0_MFR_FIXD 0x10000000 /* Workaround for PCI/DMA */ #endif /* CONFIG_440SPE */ @@ -1354,8 +1362,6 @@ #define plb1_bearl (PLB_ARBITER_BASE+ 0x0C) #define plb1_bearh (PLB_ARBITER_BASE+ 0x0D) -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* Pin Function Control Register 1 */ #define SDR0_PFC1 0x4101 #define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */ @@ -1421,7 +1427,7 @@ #define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */ #define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */ -#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */ +#define GPT0_COMP6 0x00000098 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define SDR0_USB2D0CR 0x0320 diff --git a/include/spartan2.h b/include/spartan2.h index d2e81e3..bd159e1 100644 --- a/include/spartan2.h +++ b/include/spartan2.h @@ -58,6 +58,7 @@ typedef struct { Xilinx_init_fn init; Xilinx_done_fn done; Xilinx_wr_fn wr; + Xilinx_post_fn post; int relocated; } Xilinx_Spartan2_Slave_Serial_fns; @@ -69,6 +70,7 @@ typedef struct { #define XILINX_XC2S50_SIZE 559232/8 #define XILINX_XC2S100_SIZE 781248/8 #define XILINX_XC2S150_SIZE 1040128/8 +#define XILINX_XC2S200_SIZE 1335872/8 /* Spartan-IIE (1.8V) */ #define XILINX_XC2S50E_SIZE 630048/8 @@ -95,6 +97,9 @@ typedef struct { #define XILINX_XC2S150_DESC(iface, fn_table, cookie) \ { Xilinx_Spartan2, iface, XILINX_XC2S150_SIZE, fn_table, cookie } +#define XILINX_XC2S200_DESC(iface, fn_table, cookie) \ +{ Xilinx_Spartan2, iface, XILINX_XC2S200_SIZE, fn_table, cookie } + #define XILINX_XC2S50E_DESC(iface, fn_table, cookie) \ { Xilinx_Spartan2, iface, XILINX_XC2S50E_SIZE, fn_table, cookie } diff --git a/include/spartan3.h b/include/spartan3.h index 65a3f5a..c203eeb 100644 --- a/include/spartan3.h +++ b/include/spartan3.h @@ -58,6 +58,7 @@ typedef struct { Xilinx_init_fn init; Xilinx_done_fn done; Xilinx_wr_fn wr; + Xilinx_post_fn post; int relocated; } Xilinx_Spartan3_Slave_Serial_fns; @@ -80,9 +81,12 @@ typedef struct { #define XILINX_XC3S1200E_SIZE 3841184/8 #define XILINX_XC3S1600E_SIZE 5969696/8 +/* Spartan-IIIE (1.2V) */ +#define XILINX_XC3S1200E_SIZE 3841184/8 + /* Descriptor Macros *********************************************************************/ -/* Spartan-II devices */ +/* Spartan-III devices */ #define XILINX_XC3S50_DESC(iface, fn_table, cookie) \ { Xilinx_Spartan3, iface, XILINX_XC3S50_SIZE, fn_table, cookie } @@ -124,4 +128,9 @@ typedef struct { #define XILINX_XC3S1600E_DESC(iface, fn_table, cookie) \ { Xilinx_Spartan3, iface, XILINX_XC3S1600E_SIZE, fn_table, cookie } + +/* Spartan-IIIE devices */ +#define XILINX_XC3S1200E_DESC(iface, fn_table, cookie) \ +{ Xilinx_Spartan3, iface, XILINX_XC3S1200E_SIZE, fn_table, cookie } + #endif /* _SPARTAN3_H_ */ diff --git a/include/xilinx.h b/include/xilinx.h index 3704e1d..95ebe3d 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -31,11 +31,11 @@ *********************************************************************/ #define CFG_SPARTAN2 CFG_FPGA_DEV( 0x1 ) #define CFG_VIRTEX_E CFG_FPGA_DEV( 0x2 ) -#define CFG_VIRTEX2 CFG_FPGA_DEV( 0x4 ) +#define CFG_VIRTEX2 CFG_FPGA_DEV( 0x4 ) #define CFG_SPARTAN3 CFG_FPGA_DEV( 0x8 ) #define CFG_XILINX_SPARTAN2 (CFG_FPGA_XILINX | CFG_SPARTAN2) #define CFG_XILINX_VIRTEX_E (CFG_FPGA_XILINX | CFG_VIRTEX_E) -#define CFG_XILINX_VIRTEX2 (CFG_FPGA_XILINX | CFG_VIRTEX2) +#define CFG_XILINX_VIRTEX2 (CFG_FPGA_XILINX | CFG_VIRTEX2) #define CFG_XILINX_SPARTAN3 (CFG_FPGA_XILINX | CFG_SPARTAN3) /* XXX - Add new models here */ |