diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/bootstage.h | 1 | ||||
| -rw-r--r-- | include/configs/minnowmax.h | 2 | ||||
| -rw-r--r-- | include/configs/sama5d2_ptc.h | 155 | ||||
| -rw-r--r-- | include/configs/x86-common.h | 9 | ||||
| -rw-r--r-- | include/configs/xilinx_zynqmp.h | 59 | ||||
| -rw-r--r-- | include/configs/xilinx_zynqmp_zcu102.h | 6 | ||||
| -rw-r--r-- | include/configs/zynq-common.h | 6 | ||||
| -rw-r--r-- | include/image.h | 7 | ||||
| -rw-r--r-- | include/qfw.h | 176 | ||||
| -rw-r--r-- | include/spl.h | 1 |
10 files changed, 411 insertions, 11 deletions
diff --git a/include/bootstage.h b/include/bootstage.h index 9765360..0880a68 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -198,6 +198,7 @@ enum bootstage_id { BOOTSTAGE_ID_ACCUM_SCSI, BOOTSTAGE_ID_ACCUM_SPI, BOOTSTAGE_ID_ACCUM_DECOMP, + BOOTSTAGE_ID_FPGA_INIT, /* a few spare for the user, from here */ BOOTSTAGE_ID_USER, diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h index 674d1f6..95ad128 100644 --- a/include/configs/minnowmax.h +++ b/include/configs/minnowmax.h @@ -40,6 +40,6 @@ #define CONFIG_X86EMU_RAW_IO #define CONFIG_ENV_SECT_SIZE 0x1000 -#define CONFIG_ENV_OFFSET 0x007fe000 +#define CONFIG_ENV_OFFSET 0x006ef000 #endif /* __CONFIG_H */ diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h new file mode 100644 index 0000000..d91d75e --- /dev/null +++ b/include/configs/sama5d2_ptc.h @@ -0,0 +1,155 @@ +/* + * Configuration settings for the SAMA5D2 PTC Engineering board. + * + * Copyright (C) 2016 Atmel + * Wenyou Yang <wenyou.yang@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* No NOR flash, this definition should put before common header */ +#define CONFIG_SYS_NO_FLASH + +#include "at91-sama5_common.h" + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_UART0 +#define CONFIG_USART_ID ATMEL_ID_UART0 + +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_SIZE 0x20000000 + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x210000 +#else +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#undef CONFIG_AT91_GPIO +#define CONFIG_ATMEL_PIO4 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 + +/* SerialFlash */ +#ifdef CONFIG_CMD_SF +#define CONFIG_ATMEL_SPI +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#endif + +/* NAND flash */ +#define CONFIG_CMD_NAND + +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ONFI_DETECTION +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC +#define CONFIG_ATMEL_NAND_HW_PMECC +#define CONFIG_CMD_NAND_TRIMFFS +#endif + +/* USB */ +#define CONFIG_CMD_USB + +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_ATMEL +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_USB_STORAGE +#endif + +/* USB device */ +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_ATMEL_USBA +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D2_PTC" + +#if defined(CONFIG_CMD_USB) +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* Ethernet Hardware */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY + +#ifdef CONFIG_SYS_USE_NANDFLASH +#undef CONFIG_ENV_OFFSET +#undef CONFIG_ENV_OFFSET_REDUND +#undef CONFIG_BOOTCOMMAND +/* u-boot env in nand flash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x200000 +#define CONFIG_ENV_OFFSET_REDUND 0x400000 +#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0xb80000 0x80000;" \ + "nand read 0x22000000 0x600000 0x600000;" \ + "bootz 0x22000000 - 0x21000000" +#endif + +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTARGS \ + "console=ttyS0,57600 earlyprintk " \ + "mtdparts=atmel_nand:6M(bootstrap)ro, 6M(kernel)ro,-(rootfs) " \ + "rootfstype=ubifs ubi.mtd=2 root=ubi0:rootfs" + +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x200000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#ifdef CONFIG_SYS_USE_SERIALFLASH +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_PMECC_CAP 8 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 224 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER +#endif + +#endif diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index b79f47b..b4aad6c 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -193,14 +193,19 @@ #define CONFIG_HOSTNAME x86 #define CONFIG_BOOTFILE "bzImage" #define CONFIG_LOADADDR 0x1000000 -#define CONFIG_RAMDISK_ADDR 0x4000000 +#define CONFIG_RAMDISK_ADDR 0x4000000 +#ifdef CONFIG_GENERATE_ACPI_TABLE +#define CONFIG_OTHBOOTARGS "othbootargs=\0" +#else +#define CONFIG_OTHBOOTARGS "othbootargs=acpi=off\0" +#endif #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_STD_DEVICES_SETTINGS \ "pciconfighost=1\0" \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ - "othbootargs=acpi=off\0" \ + CONFIG_OTHBOOTARGS \ "ramdiskaddr=0x4000000\0" \ "ramdiskfile=initramfs.gz\0" diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 6b8e3ea..b2fa164 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -41,7 +41,7 @@ # define CONFIG_IDENT_STRING " Xilinx ZynqMP" #endif -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_INIT_SP_ADDR 0xfffffffc /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */ #if !defined(COUNTER_FREQUENCY) @@ -65,6 +65,9 @@ #define CONFIG_CMD_ENV #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#ifndef CONFIG_SPL_BUILD +# define CONFIG_ISO_PARTITION +#endif #define CONFIG_MP /* BOOTP options */ @@ -74,10 +77,24 @@ #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_MAY_FAIL #define CONFIG_BOOTP_SERVERIP +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_PXE +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 + +/* Diff from config_distro_defaults.h */ +#define CONFIG_SUPPORT_RAW_INITRD +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_AUTO_COMPLETE + +/* PXE */ +#define CONFIG_CMD_PXE +#define CONFIG_MENU #if defined(CONFIG_ZYNQ_SDHCI) # define CONFIG_MMC # define CONFIG_GENERIC_MMC +# define CONFIG_SUPPORT_EMMC_BOOT # define CONFIG_SDHCI # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ # define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000 @@ -133,6 +150,7 @@ #endif /* Initial environment variables */ +#ifndef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_addr=0x80000\0" \ "fdt_addr=0x7000000\0" \ @@ -143,8 +161,8 @@ "load mmc $sdbootdev:$partid $kernel_addr Image && " \ "booti $kernel_addr - $fdt_addr\0" \ DFU_ALT_INFO +#endif -#define CONFIG_PREBOOT "run bootargs" #define CONFIG_BOOTCOMMAND "run $modeboot" #define CONFIG_BOOTDELAY 3 @@ -212,4 +230,41 @@ #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_CLOCKS +#define CONFIG_SPL_TEXT_BASE 0xfffc0000 +#define CONFIG_SPL_MAX_SIZE 0x20000 + +/* Just random location in OCM */ +#define CONFIG_SPL_BSS_START_ADDR 0x1000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x2000000 + +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_RAM_DEVICE + +#define CONFIG_SPL_OS_BOOT +/* u-boot is like dtb */ +#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin" +#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000 + +/* ATF is my kernel image */ +#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf.ub" + +/* FIT load address for RAM boot */ +#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000 + +/* MMC support */ +#ifdef CONFIG_ZYNQ_SDHCI +# define CONFIG_SPL_MMC_SUPPORT +# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */ +# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */ +# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */ +# define CONFIG_SPL_LIBDISK_SUPPORT +# define CONFIG_SPL_FAT_SUPPORT +# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#endif + #endif /* __XILINX_ZYNQMP_H */ diff --git a/include/configs/xilinx_zynqmp_zcu102.h b/include/configs/xilinx_zynqmp_zcu102.h index 30db2e4..81079fe 100644 --- a/include/configs/xilinx_zynqmp_zcu102.h +++ b/include/configs/xilinx_zynqmp_zcu102.h @@ -48,6 +48,12 @@ #define CONFIG_IDENT_STRING " Xilinx ZynqMP ZCU102" +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_CMD_EEPROM +#define CONFIG_ZYNQ_EEPROM_BUS 5 +#define CONFIG_ZYNQ_GEM_EEPROM_ADDR 0x54 +#define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0x20 + #define CONFIG_KERNEL_FDT_OFST_SIZE \ "kernel_offset=0x180000\0" \ "fdt_offset=0x100000\0" \ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index a3e4aec..82ece0d 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -315,11 +315,7 @@ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_FAT_SUPPORT -#ifdef CONFIG_OF_SEPARATE -# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" -#else -# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif /* Disable dcache for SPL just for sure */ diff --git a/include/image.h b/include/image.h index f9ee564..a8f6bd1 100644 --- a/include/image.h +++ b/include/image.h @@ -246,8 +246,10 @@ struct lmb; #define IH_TYPE_RKSD 24 /* Rockchip SD card */ #define IH_TYPE_RKSPI 25 /* Rockchip SPI image */ #define IH_TYPE_ZYNQIMAGE 26 /* Xilinx Zynq Boot Image */ +#define IH_TYPE_ZYNQMPIMAGE 27 /* Xilinx ZynqMP Boot Image */ +#define IH_TYPE_FPGA 28 /* FPGA Image */ -#define IH_TYPE_COUNT 27 /* Number of image types */ +#define IH_TYPE_COUNT 29 /* Number of image types */ /* * Compression Types @@ -494,6 +496,8 @@ int genimg_get_format(const void *img_addr); int genimg_has_config(bootm_headers_t *images); ulong genimg_get_image(ulong img_addr); +int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images, + uint8_t arch, const ulong *ld_start, ulong * const ld_len); int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, uint8_t arch, ulong *rd_start, ulong *rd_end); @@ -809,6 +813,7 @@ int bootz_setup(ulong image, ulong *start, ulong *end); #define FIT_LOADABLE_PROP "loadables" #define FIT_DEFAULT_PROP "default" #define FIT_SETUP_PROP "setup" +#define FIT_FPGA_PROP "fpga" #define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE diff --git a/include/qfw.h b/include/qfw.h new file mode 100644 index 0000000..b0b3b59 --- /dev/null +++ b/include/qfw.h @@ -0,0 +1,176 @@ +/* + * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __FW_CFG__ +#define __FW_CFG__ + +#include <linux/list.h> + +enum qemu_fwcfg_items { + FW_CFG_SIGNATURE = 0x00, + FW_CFG_ID = 0x01, + FW_CFG_UUID = 0x02, + FW_CFG_RAM_SIZE = 0x03, + FW_CFG_NOGRAPHIC = 0x04, + FW_CFG_NB_CPUS = 0x05, + FW_CFG_MACHINE_ID = 0x06, + FW_CFG_KERNEL_ADDR = 0x07, + FW_CFG_KERNEL_SIZE = 0x08, + FW_CFG_KERNEL_CMDLINE = 0x09, + FW_CFG_INITRD_ADDR = 0x0a, + FW_CFG_INITRD_SIZE = 0x0b, + FW_CFG_BOOT_DEVICE = 0x0c, + FW_CFG_NUMA = 0x0d, + FW_CFG_BOOT_MENU = 0x0e, + FW_CFG_MAX_CPUS = 0x0f, + FW_CFG_KERNEL_ENTRY = 0x10, + FW_CFG_KERNEL_DATA = 0x11, + FW_CFG_INITRD_DATA = 0x12, + FW_CFG_CMDLINE_ADDR = 0x13, + FW_CFG_CMDLINE_SIZE = 0x14, + FW_CFG_CMDLINE_DATA = 0x15, + FW_CFG_SETUP_ADDR = 0x16, + FW_CFG_SETUP_SIZE = 0x17, + FW_CFG_SETUP_DATA = 0x18, + FW_CFG_FILE_DIR = 0x19, + FW_CFG_FILE_FIRST = 0x20, + FW_CFG_WRITE_CHANNEL = 0x4000, + FW_CFG_ARCH_LOCAL = 0x8000, + FW_CFG_INVALID = 0xffff, +}; + +enum { + BIOS_LINKER_LOADER_COMMAND_ALLOCATE = 0x1, + BIOS_LINKER_LOADER_COMMAND_ADD_POINTER = 0x2, + BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM = 0x3, +}; + +enum { + BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH = 0x1, + BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG = 0x2, +}; + +#define FW_CFG_FILE_SLOTS 0x10 +#define FW_CFG_MAX_ENTRY (FW_CFG_FILE_FIRST + FW_CFG_FILE_SLOTS) +#define FW_CFG_ENTRY_MASK ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL) + +#define FW_CFG_MAX_FILE_PATH 56 +#define BIOS_LINKER_LOADER_FILESZ FW_CFG_MAX_FILE_PATH + +#define QEMU_FW_CFG_SIGNATURE (('Q' << 24) | ('E' << 16) | ('M' << 8) | 'U') + +#define FW_CFG_DMA_ERROR (1 << 0) +#define FW_CFG_DMA_READ (1 << 1) +#define FW_CFG_DMA_SKIP (1 << 2) +#define FW_CFG_DMA_SELECT (1 << 3) + +#define FW_CFG_DMA_ENABLED (1 << 1) + +struct fw_cfg_file { + __be32 size; + __be16 select; + __be16 reserved; + char name[FW_CFG_MAX_FILE_PATH]; +}; + +struct fw_file { + struct fw_cfg_file cfg; /* firmware file information */ + unsigned long addr; /* firmware file in-memory address */ + struct list_head list; /* list node to link to fw_list */ +}; + +struct fw_cfg_file_iter { + struct list_head *entry; /* structure to iterate file list */ +}; + +struct fw_cfg_dma_access { + __be32 control; + __be32 length; + __be64 address; +}; + +struct fw_cfg_arch_ops { + void (*arch_read_pio)(uint16_t selector, uint32_t size, + void *address); + void (*arch_read_dma)(struct fw_cfg_dma_access *dma); +}; + +struct bios_linker_entry { + __le32 command; + union { + /* + * COMMAND_ALLOCATE - allocate a table from @alloc.file + * subject to @alloc.align alignment (must be power of 2) + * and @alloc.zone (can be HIGH or FSEG) requirements. + * + * Must appear exactly once for each file, and before + * this file is referenced by any other command. + */ + struct { + char file[BIOS_LINKER_LOADER_FILESZ]; + __le32 align; + uint8_t zone; + } alloc; + + /* + * COMMAND_ADD_POINTER - patch the table (originating from + * @dest_file) at @pointer.offset, by adding a pointer to the + * table originating from @src_file. 1,2,4 or 8 byte unsigned + * addition is used depending on @pointer.size. + */ + struct { + char dest_file[BIOS_LINKER_LOADER_FILESZ]; + char src_file[BIOS_LINKER_LOADER_FILESZ]; + __le32 offset; + uint8_t size; + } pointer; + + /* + * COMMAND_ADD_CHECKSUM - calculate checksum of the range + * specified by @cksum_start and @cksum_length fields, + * and then add the value at @cksum.offset. + * Checksum simply sums -X for each byte X in the range + * using 8-bit math. + */ + struct { + char file[BIOS_LINKER_LOADER_FILESZ]; + __le32 offset; + __le32 start; + __le32 length; + } cksum; + + /* padding */ + char pad[124]; + }; +} __packed; + +/** + * Initialize QEMU fw_cfg interface + * + * @ops: arch specific read operations + */ +void qemu_fwcfg_init(struct fw_cfg_arch_ops *ops); + +void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address); +int qemu_fwcfg_read_firmware_list(void); +struct fw_file *qemu_fwcfg_find_file(const char *name); + +/** + * Get system cpu number + * + * @return: cpu number in system + */ +int qemu_fwcfg_online_cpus(void); + +/* helper functions to iterate firmware file list */ +struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter); +struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter); +bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter); + +bool qemu_fwcfg_present(void); +bool qemu_fwcfg_dma_present(void); + +#endif diff --git a/include/spl.h b/include/spl.h index 7edfab4..335b76a 100644 --- a/include/spl.h +++ b/include/spl.h @@ -58,6 +58,7 @@ u32 spl_boot_mode(void); void spl_set_header_raw_uboot(void); int spl_parse_image_header(const struct image_header *header); void spl_board_prepare_for_linux(void); +void spl_board_prepare_for_boot(void); void __noreturn jump_to_image_linux(void *arg); int spl_start_uboot(void); void spl_display_print(void); |