diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/tny_a9260.h | 85 |
1 files changed, 42 insertions, 43 deletions
diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index 7b18022..986aeba 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -30,19 +30,11 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_AT91_LEGACY - -#if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9260_EEPROM) -#define CONFIG_TNY_A9260 -#elif defined(CONFIG_TNY_A9G20_NANDFLASH) || defined(CONFIG_TNY_A9G20_EEPROM) -#define CONFIG_TNY_A9G20 -#endif - -#ifdef CONFIG_TNY_A9260 -#define CONFIG_AT91SAM9260 -#else -#define CONFIG_AT91SAM9G20 -#endif +/* + * SoC must be defined first, before hardware.h is included. + * In this case SoC is defined in boards.cfg. + */ +#include <asm/hardware.h> #if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9G20_NANDFLASH) #define CONFIG_ENV_IS_IN_NAND @@ -50,29 +42,36 @@ #define CONFIG_ENV_IS_IN_EEPROM #endif +/* Define actual evaluation board type from used processor type */ +#ifdef CONFIG_AT91SAM9G20 +# define CONFIG_TNY_A9G20 +#else +# define CONFIG_TNY_A9260 +#endif + /* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ 1000 -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG #define CONFIG_SKIP_LOWLEVEL_INIT /* * Hardware drivers */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 -#undef CONFIG_USART0 -#undef CONFIG_USART1 -#undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_ATMEL_LEGACY +#define CONFIG_AT91_GPIO + +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_BOOTDELAY 3 @@ -86,13 +85,16 @@ #undef CONFIG_CMD_IMLS #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS #undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_USB /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 +#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */ +# define CONFIG_SYS_INIT_SP_ADDR \ + (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) /* SPI EEPROM */ #define CONFIG_SPI @@ -109,8 +111,8 @@ #define CONFIG_CMD_NAND #define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_DBW_8 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ @@ -119,27 +121,27 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 /* NOR flash - no real flash on this board */ -#define CONFIG_SYS_NO_FLASH 1 +#define CONFIG_SYS_NO_FLASH -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_CMD_FAT 1 +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FAT #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END 0x23e00000 /* Env in EEPROM, bootstrap + u-boot in NAND*/ #ifdef CONFIG_ENV_IS_IN_EEPROM #define CONFIG_ENV_OFFSET 0x20 -#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_SIZE 0x1000 #endif /* Env, bootstrap and u-boot in NAND */ #ifdef CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SIZE 0x20000 #endif #define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000" @@ -149,15 +151,12 @@ "120M(rootfs),-(other) " \ "rw rootfstype=jffs2" -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } - #define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING /* * Size of malloc() pool |