diff options
Diffstat (limited to 'include')
25 files changed, 1110 insertions, 51 deletions
diff --git a/include/asm-arm/arch-davinci/emac_defs.h b/include/asm-arm/arch-davinci/emac_defs.h index ae75f84..96bc80e 100644 --- a/include/asm-arm/arch-davinci/emac_defs.h +++ b/include/asm-arm/arch-davinci/emac_defs.h @@ -50,7 +50,7 @@ #define EMAC_MDIO_BASE_ADDR (0x01c84000) #endif -#ifdef CONFIG_SOC_DM646x +#ifdef CONFIG_SOC_DM646X /* MDIO module input frequency */ #define EMAC_MDIO_BUS_FREQ 76500000 /* MDIO clock output frequency */ @@ -283,7 +283,7 @@ typedef struct { /* EMAC Wrapper Registers Structure */ typedef struct { -#if defined(CONFIG_SOC_DM646x) || defined(CONFIG_SOC_DM365) +#if defined(CONFIG_SOC_DM646X) || defined(CONFIG_SOC_DM365) dv_reg IDVER; dv_reg SOFTRST; dv_reg EMCTRL; diff --git a/include/asm-arm/arch-davinci/gpio_defs.h b/include/asm-arm/arch-davinci/gpio_defs.h new file mode 100644 index 0000000..ec43969 --- /dev/null +++ b/include/asm-arm/arch-davinci/gpio_defs.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2009 Texas Instruments Incorporated + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _GPIO_DEFS_H_ +#define _GPIO_DEFS_H_ + +#define DAVINCI_GPIO_BINTEN 0x01C67008 +#define DAVINCI_GPIO_BANK01 0x01C67010 +#define DAVINCI_GPIO_BANK23 0x01C67038 +#define DAVINCI_GPIO_BANK45 0x01C67060 +#define DAVINCI_GPIO_BANK67 0x01C67088 + +struct davinci_gpio { + unsigned int dir; + unsigned int out_data; + unsigned int set_data; + unsigned int clr_data; + unsigned int in_data; + unsigned int set_rising; + unsigned int clr_rising; + unsigned int set_falling; + unsigned int clr_falling; + unsigned int intstat; +}; + +struct davinci_gpio_bank { + int num_gpio; + unsigned int irq_num; + unsigned int irq_mask; + unsigned long *in_use; + unsigned long base; +}; + +#endif + diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h index 313b3f3..ac32510 100644 --- a/include/asm-arm/arch-davinci/hardware.h +++ b/include/asm-arm/arch-davinci/hardware.h @@ -105,6 +105,13 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x01d10000 #define DAVINCI_MMC_SD0_BASE 0x01d11000 +#elif defined(CONFIG_SOC_DM646X) +#define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x20008000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x44000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x46000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x48000000 + #endif /* Power and Sleep Controller (PSC) Domains */ @@ -153,6 +160,10 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_LPSC_GEM 39 #define DAVINCI_LPSC_IMCOP 40 +#define DAVINCI_DM646X_LPSC_EMAC 14 +#define DAVINCI_DM646X_LPSC_UART0 26 +#define DAVINCI_DM646X_LPSC_I2C 31 + void lpsc_on(unsigned int id); void dsp_on(void); diff --git a/include/asm-arm/arch-davinci/nand_defs.h b/include/asm-arm/arch-davinci/nand_defs.h index 386540e..10f3a39 100644 --- a/include/asm-arm/arch-davinci/nand_defs.h +++ b/include/asm-arm/arch-davinci/nand_defs.h @@ -28,7 +28,7 @@ #include <asm/arch/hardware.h> -#ifdef CONFIG_SOC_DM646x +#ifdef CONFIG_SOC_DM646X #define MASK_CLE 0x80000 #define MASK_ALE 0x40000 #else diff --git a/include/asm-arm/arch-omap3/mmc.h b/include/asm-arm/arch-omap3/mmc.h index 55584d9..196ffdc 100644 --- a/include/asm-arm/arch-omap3/mmc.h +++ b/include/asm-arm/arch-omap3/mmc.h @@ -223,6 +223,13 @@ typedef struct { unsigned short newpublishedrca; } mmc_resp_r6; +typedef union { + unsigned int resp[4]; + mmc_resp_r3 r3; + mmc_resp_r6 r6; + mmc_csd_reg_t Card_CSD; +} mmc_resp_t; + extern mmc_card_data mmc_dev; unsigned char mmc_lowlevel_init(void); diff --git a/include/asm-arm/arch-omap3/omap3.h b/include/asm-arm/arch-omap3/omap3.h index 6459d99..12815f6 100644 --- a/include/asm-arm/arch-omap3/omap3.h +++ b/include/asm-arm/arch-omap3/omap3.h @@ -168,6 +168,8 @@ struct gpio { * ES1 = rev 0 * * ES2 onwards, the value maps to contents of IDCODE register [31:28]. + * + * Note : CPU_3XX_ES20 is used in cache.S. Please review before changing. */ #define CPU_3XX_ES10 0 #define CPU_3XX_ES20 1 diff --git a/include/asm-arm/arch-omap3/sys_proto.h b/include/asm-arm/arch-omap3/sys_proto.h index 7361d08..2246f80 100644 --- a/include/asm-arm/arch-omap3/sys_proto.h +++ b/include/asm-arm/arch-omap3/sys_proto.h @@ -55,7 +55,7 @@ void secureworld_exit(void); void setup_auxcr(void); void try_unlock_memory(void); u32 get_boot_type(void); -void v7_flush_dcache_all(u32); +void invalidate_dcache(u32); void sr32(void *, u32, u32, u32); u32 wait_on_value(u32, u32, void *, u32); void sdelay(unsigned long); diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h new file mode 100644 index 0000000..4ef8566 --- /dev/null +++ b/include/configs/cpu9260.h @@ -0,0 +1,453 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * Ilko Iliev <www.ronetix.at> + * + * (C) Copyright 2009 + * Eric Benard <eric@eukrea.com> + * + * Configuration settings for the Eukrea CPU9260 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_DISPLAY_CPUINFO 1 + +#define AT91_MAIN_CLOCK 18432000 +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_ARM926EJS 1 + +#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9260) +#define CONFIG_CPU9260 1 +#elif defined(CONFIG_CPU9G20_128M) || defined(CONFIG_CPU9G20) +#define CONFIG_CPU9G20 1 +#endif + +#if defined(CONFIG_CPU9G20) +#define CONFIG_AT91SAM9G20 1 +#elif defined(CONFIG_CPU9260) +#define CONFIG_AT91SAM9260 1 +#else +#error "Unknown board" +#endif + +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_USE_IRQ + +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* clocks */ +#if defined(CONFIG_CPU9G20) +#define MASTER_PLL_DIV 0x01 +#define MASTER_PLL_MUL 0x2B +#elif defined(CONFIG_CPU9260) +#define MASTER_PLL_DIV 0x09 +#define MASTER_PLL_MUL 0x61 +#endif + +/* CKGR_MOR - enable main osc. */ +#define CONFIG_SYS_MOR_VAL \ + (AT91_PMC_MOSCEN | \ + (255 << 8)) /* Main Oscillator Start-up Time */ +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_PLLAR_VAL \ + (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_PLLAR_VAL \ + (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ + AT91_PMC_OUT | \ + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) +#endif + +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_MCKR1_VAL \ + (AT91_PMC_CSS_PLLA | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_6 | \ + AT91_PMC_PDIV_2) +#define CONFIG_SYS_MCKR2_VAL \ + CONFIG_SYS_MCKR1_VAL +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_MCKR1_VAL \ + (AT91_PMC_CSS_SLOW | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_2 | \ + AT91_PMC_PDIV_1) +#define CONFIG_SYS_MCKR2_VAL \ + (AT91_PMC_CSS_PLLA | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_2 | \ + AT91_PMC_PDIV_1) +#endif + +/* define PDC[31:16] as DATA[31:16] */ +#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 +/* no pull-up for D[31:16] */ +#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 + +/* EBI_CSA, 3.3V, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ +#define CONFIG_SYS_MATRIX_EBICSA_VAL \ + (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC |\ + AT91_MATRIX_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_VDDIOMSEL) + +/* SDRAM */ +/* SDRAMC_MR Mode register */ +#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL +/* SDRAMC_TR - Refresh Timer register */ +#define CONFIG_SYS_SDRC_TR_VAL1 0x287 +/* SDRAMC_CR - Configuration register*/ +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_SDRC_CR_VAL_64MB \ + (AT91_SDRAMC_NC_9 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_2 | \ + AT91_SDRAMC_DBW_32 | \ + (2 << 8) | /* Write Recovery Delay */ \ + (9 << 12) | /* Row Cycle Delay */ \ + (3 << 16) | /* Row Precharge Delay */ \ + (3 << 20) | /* Row to Column Delay */ \ + (6 << 24) | /* Active to Precharge Delay */ \ + (10 << 28)) /* Exit Self Refresh to Active Delay */ + +#define CONFIG_SYS_SDRC_CR_VAL_128MB \ + (AT91_SDRAMC_NC_10 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_2 | \ + AT91_SDRAMC_DBW_32 | \ + (2 << 8) | /* Write Recovery Delay */ \ + (9 << 12) | /* Row Cycle Delay */ \ + (3 << 16) | /* Row Precharge Delay */ \ + (3 << 20) | /* Row to Column Delay */ \ + (6 << 24) | /* Active to Precharge Delay */ \ + (10 << 28)) /* Exit Self Refresh to Active Delay */ +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_SDRC_CR_VAL_64MB \ + (AT91_SDRAMC_NC_9 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_2 | \ + AT91_SDRAMC_DBW_32 | \ + (2 << 8) | /* Write Recovery Delay */ \ + (7 << 12) | /* Row Cycle Delay */ \ + (2 << 16) | /* Row Precharge Delay */ \ + (2 << 20) | /* Row to Column Delay */ \ + (5 << 24) | /* Active to Precharge Delay */ \ + (8 << 28)) /* Exit Self Refresh to Active Delay */ + +#define CONFIG_SYS_SDRC_CR_VAL_128MB \ + (AT91_SDRAMC_NC_10 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_2 | \ + AT91_SDRAMC_DBW_32 | \ + (2 << 8) | /* Write Recovery Delay */ \ + (7 << 12) | /* Row Cycle Delay */ \ + (2 << 16) | /* Row Precharge Delay */ \ + (2 << 20) | /* Row to Column Delay */ \ + (5 << 24) | /* Active to Precharge Delay */ \ + (8 << 28)) /* Exit Self Refresh to Active Delay */ +#endif + +/* Memory Device Register -> SDRAM */ +#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM +#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE +#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH +#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR +#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL +#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ +#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ + +/* setup SMC0, CS0 (NOR Flash) - 16-bit */ +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_SMC0_SETUP0_VAL \ + (AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | \ + AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)) +#define CONFIG_SYS_SMC0_PULSE0_VAL \ + (AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(8) | \ + AT91_SMC_NRDPULSE_(14) | AT91_SMC_NCS_RDPULSE_(14)) +#define CONFIG_SYS_SMC0_CYCLE0_VAL \ + (AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(14)) +#define CONFIG_SYS_SMC0_MODE0_VAL \ + (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ + AT91_SMC_DBW_16 | \ + AT91_SMC_TDFMODE | \ + AT91_SMC_TDF_(3)) +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_SMC0_SETUP0_VAL \ + (AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | \ + AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)) +#define CONFIG_SYS_SMC0_PULSE0_VAL \ + (AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(6) | \ + AT91_SMC_NRDPULSE_(10) | AT91_SMC_NCS_RDPULSE_(10)) +#define CONFIG_SYS_SMC0_CYCLE0_VAL \ + (AT91_SMC_NWECYCLE_(6) | AT91_SMC_NRDCYCLE_(10)) +#define CONFIG_SYS_SMC0_MODE0_VAL \ + (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ + AT91_SMC_DBW_16 | \ + AT91_SMC_TDFMODE | \ + AT91_SMC_TDF_(2)) +#endif + +/* user reset enable */ +#define CONFIG_SYS_RSTC_RMR_VAL \ + (AT91_RSTC_KEY | \ + AT91_RSTC_PROCRST | \ + AT91_RSTC_RSTTYP_WAKEUP | \ + AT91_RSTC_RSTTYP_WATCHDOG) + +/* Disable Watchdog */ +#define CONFIG_SYS_WDTC_WDMR_VAL \ + (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ + AT91_WDT_WDV | \ + AT91_WDT_WDDIS | \ + AT91_WDT_WDD) + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 +#define CONFIG_CMD_FAT 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9G20_128M) +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 MB */ +#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_128MB +#else +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 MB */ +#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_64MB +#endif + +/* NAND flash */ +#define CONFIG_NAND_ATMEL 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) + +/* NOR flash */ +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define PHYS_FLASH_1 0x10000000 +#define PHYS_FLASH_2 0x12000000 +#define CONFIG_SYS_FLASH_BANKS_LIST \ + { PHYS_FLASH_1, PHYS_FLASH_2 } +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_SECT (255+4) +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_EMPTY_INFO 1 +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_RESET_PHY_R 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY 1 + +/* LEDS */ +/* Status LED */ +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED 1 +#define STATUS_LED_RED 0 +#define STATUS_LED_GREEN 1 +#define STATUS_LED_YELLOW 2 +#define STATUS_LED_BLUE 3 +/* Red */ +#define STATUS_LED_BIT STATUS_LED_RED +#define STATUS_LED_STATE STATUS_LED_OFF +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +/* Green */ +#define STATUS_LED_BIT1 STATUS_LED_GREEN +#define STATUS_LED_STATE1 STATUS_LED_OFF +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +/* Yellow */ +#define STATUS_LED_BIT2 STATUS_LED_YELLOW +#define STATUS_LED_STATE2 STATUS_LED_OFF +#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) +/* Blue */ +#define STATUS_LED_BIT3 STATUS_LED_BLUE +#define STATUS_LED_STATE3 STATUS_LED_ON +#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) +/* Optional value */ +#define STATUS_LED_BOOT STATUS_LED_BIT + +#define CONFIG_RED_LED AT91_PIN_PC11 +#define CONFIG_GREEN_LED AT91_PIN_PC12 +#define CONFIG_YELLOW_LED AT91_PIN_PC7 +#define CONFIG_BLUE_LED AT91_PIN_PC9 + +/* USB */ +#define CONFIG_USB_ATMEL 1 +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +#define CONFIG_SYS_LOAD_ADDR 0x21000000 + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END 0x21e00000 + +#undef CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SYS_USE_FLASH 1 + +#if defined(CONFIG_SYS_USE_FLASH) +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_OVERWRITE 1 + +#define CONFIG_BOOTCOMMAND "run flashboot" + +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:" \ + "256k(u-boot)ro," \ + "128k(u-boot-env)ro," \ + "1792k(kernel)," \ + "-(rootfs);" \ + "atmel_nand:-(nand)" + +#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 " + +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_BASEDIR "cpu9G20" +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_BASEDIR "cpu9260" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "partition=nand0,0\0" \ + "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "ramboot=tftpboot 0x22000000 cpu9260/uImage;" \ + "run ramargs;bootm 22000000\0" \ + "flashboot=run ramargs;bootm 0x10060000\0" \ + "basedir=" CONFIG_SYS_BASEDIR "\0" \ + "updtub=tftp 0x24000000 $(basedir)/u-boot.bin;protect " \ + "off 0x10000000 0x1003ffff;erase 0x10000000 " \ + "0x1003ffff;cp.b 0x24000000 0x10000000 " \ + "$(filesize)\0" \ + "updtui=tftp 0x24000000 $(basedir)/uImage;protect off" \ + " 0x10060000 0x1021ffff;erase 0x10060000 " \ + "0x1021ffff;cp.b 0x24000000 0x10060000 " \ + "$(filesize)\0" \ + "updtrfs=tftp 0x24000000 $(basedir)/rootfs.jffs2; " \ + "protect off 0x10220000 0x13ffffff;erase " \ + "0x10220000 0x13ffffff;cp.b 0x24000000 " \ + "0x10220000 $(filesize)\0" \ + "" +#endif + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_PROMPT "CPU9G20=> " +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_PROMPT "CPU9260=> " +#endif +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_SILENT_CONSOLE 1 +#define CONFIG_NETCONSOLE 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN \ + ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +#define CONFIG_STACKSIZE (32 * 1024) + +#if defined(CONFIG_USE_IRQ) +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h new file mode 100644 index 0000000..0d3acf6 --- /dev/null +++ b/include/configs/cpuat91.h @@ -0,0 +1,228 @@ +/* + * CPUAT91 by (C) Copyright 2006 Eric Benard + * eric@eukrea.com + * + * Configuration settings for the CPUAT91 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#ifdef CONFIG_CPUAT91_RAM +#define CONFIG_SKIP_LOWLEVEL_INIT 1 +#define CONFIG_SKIP_RELOCATE_UBOOT 1 +#define CONFIG_CPUAT91 1 +#else +#define CONFIG_BOOTDELAY 1 +#endif + +#define AT91C_MAIN_CLOCK 179712000 +#define AT91C_MASTER_CLOCK 59904000 + +#define AT91_SLOW_CLOCK 32768 + +#define CONFIG_ARM920T 1 +#define CONFIG_AT91RM9200 1 + +#undef CONFIG_USE_IRQ +#define USE_920T_MMU 1 + +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 +/* flash */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ + +/* clocks */ +#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz for USB */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock */ + +/* sdram */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as D16/D31 */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x2188C155 /* set up the SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + +/* define one of these to choose the DBGU, USART0 or USART1 as console */ +#define CONFIG_AT91RM9200_USART 1 +#define CONFIG_DBGU 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 + +#define CONFIG_HARD_I2C 1 + +#if defined(CONFIG_HARD_I2C) +#define CONFIG_SYS_I2C_SPEED 50000 +#define CONFIG_SYS_I2C_SLAVE 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +#endif + +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_MII 1 +#define CONFIG_CMD_CACHE 1 +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_NFS + +#if defined(CONFIG_HARD_I2C) +#define CONFIG_CMD_EEPROM 1 +#define CONFIG_CMD_I2C 1 +#endif + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x02000000 + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END \ + (CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512 * 1024) + +#define CONFIG_DRIVER_ETHER 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_AT91C_USE_RMII 1 +#define CONFIG_PHY_ADDRESS (1 << 5) +#define CONFIG_KS8721_PHY 1 + +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_EMPTY_INFO 1 +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_PROTECTION 1 +#define PHYS_FLASH_1 0x10000000 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_SECT 128 + +#if defined(CONFIG_CMD_USB) +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_AT91C_PQFP_UHPBU 1 +#undef CONFIG_SYS_USB_OHCI_BOARD_INIT +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 +#endif + +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_SECT_SIZE 0x20000 + +#define CONFIG_SYS_LOAD_ADDR 0x21000000 + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } + +#define CONFIG_SYS_PROMPT "CPUAT91=> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 32 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_SYS_LONGHELP 1 + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) + +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_STACKSIZE (32 * 1024) + +#if defined(CONFIG_USE_IRQ) +#error CONFIG_USE_IRQ not supported +#endif + +#define CONFIG_DEVICE_NULLDEV 1 +#define CONFIG_SILENT_CONSOLE 1 + +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_STOP_STR " " +#define CONFIG_AUTOBOOT_DELAY_STR "d" + +#define CONFIG_VERSION_VARIABLE 1 + +#define MTDIDS_DEFAULT "nor0=physmap-flash.0" +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:" \ + "128k(u-boot)ro," \ + "128k(u-boot-env)," \ + "1408k(kernel)," \ + "-(rootfs)" + +#define CONFIG_BOOTARGS \ + "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200" + +#define CONFIG_BOOTCOMMAND "run flashboot" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdid=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "flub=tftp 21000000 cpuat91/u-boot.bin; protect off 10000000 " \ + "1001FFFF; erase 10000000 1001FFFF; cp.b 21000000 " \ + "10000000 ${filesize}\0" \ + "flui=tftp 21000000 cpuat91/uImage; protect off 10040000 " \ + "1019ffff; erase 10040000 1019ffff; cp.b 21000000 " \ + "10040000 ${filesize}\0" \ + "flrfs=tftp 21000000 cpuat91/rootfs.jffs2; protect off " \ + "101a0000 10ffffff; erase 101a0000 10ffffff; cp.b " \ + "21000000 101A0000 ${filesize}\0" \ + "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "flashboot=run ramargs;bootm 10040000\0" \ + "netboot=run ramargs;tftpboot 21000000 cpuat91/uImage;" \ + "bootm 21000000\0" +#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index c35f5c9..d092fb8 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -19,7 +19,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/sizes.h> /* Spectrum Digital TMS320DM355 EVM board */ #define DAVINCI_DM355EVM @@ -40,7 +39,7 @@ /* Memory Info */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE SZ_128M +#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */ /* Serial Driver info: UART0 for console */ #define CONFIG_SYS_NS16550 @@ -66,9 +65,10 @@ #define CONFIG_SYS_I2C_SLAVE 0x10 /* SMBus host address */ /* NAND: socketed, two chipselects, normally 2 GBytes */ -/* NYET -- #define CONFIG_NAND_DAVINCI */ -#define CONFIG_SYS_NAND_HW_ECC +#define CONFIG_NAND_DAVINCI #define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_PAGE_2K #define CONFIG_SYS_NAND_LARGEPAGE #define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } @@ -96,15 +96,12 @@ #ifdef CONFIG_NAND_DAVINCI #define CONFIG_CMD_MTDPARTS #define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE #define CONFIG_CMD_NAND #define CONFIG_CMD_UBI #define CONFIG_RBTREE #endif -/* TEMPORARY -- no safe place to save env, yet */ -#define CONFIG_ENV_IS_NOWHERE -#undef CONFIG_CMD_SAVEENV - #ifdef CONFIG_USB_DAVINCI #define CONFIG_MUSB_HCD #define CONFIG_CMD_USB @@ -130,9 +127,14 @@ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_LONGHELP -#define CONFIG_ENV_SIZE SZ_16K +#ifdef CONFIG_NAND_DAVINCI +#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x3C0000 +#undef CONFIG_ENV_IS_IN_FLASH +#endif -/* NYET -- #define CONFIG_BOOTDELAY 5 */ +#define CONFIG_BOOTDELAY 5 #define CONFIG_BOOTCOMMAND \ "dhcp;bootm" #define CONFIG_BOOTARGS \ @@ -146,8 +148,8 @@ #define CONFIG_NET_RETRY_COUNT 10 /* U-Boot memory configuration */ -#define CONFIG_STACKSIZE SZ_256K /* regular stack */ -#define CONFIG_SYS_MALLOC_LEN SZ_512K /* malloc() arena */ +#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ +#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index 47cb554..2797f82 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -18,7 +18,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/sizes.h> /* Spectrum Digital TMS320DM365 EVM board */ #define DAVINCI_DM365EVM @@ -38,7 +37,7 @@ /* Memory Info */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE SZ_128M +#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */ /* Serial Driver info: UART0 for console */ #define CONFIG_SYS_NS16550 @@ -74,7 +73,6 @@ /* NAND: socketed, two chipselects, normally 2 GBytes */ #define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST #define CONFIG_SYS_NAND_PAGE_2K @@ -98,7 +96,6 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_SAVEENV #ifdef CONFIG_NAND_DAVINCI #define CONFIG_CMD_MTDPARTS @@ -125,7 +122,7 @@ #define CONFIG_SYS_LONGHELP #ifdef CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE SZ_256K +#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x3C0000 #undef CONFIG_ENV_IS_IN_FLASH @@ -143,8 +140,8 @@ #define CONFIG_TIMESTAMP /* U-Boot memory configuration */ -#define CONFIG_STACKSIZE SZ_256K /* regular stack */ -#define CONFIG_SYS_MALLOC_LEN SZ_1M /* malloc() arena */ +#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ +#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index 96b6afc..f7d2399 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -19,7 +19,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/sizes.h> /* * Define this to make U-Boot skip low level initialization when loaded @@ -120,8 +119,9 @@ #define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ #ifdef CONFIG_SYS_NAND_SMALLPAGE #define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */ -#define CONFIG_ENV_SIZE SZ_16K +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ #define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE #define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT \ "nand0=davinci_nand.0" @@ -129,7 +129,7 @@ "mtdparts=davinci_nand.0:384k(bootloader)ro,4m(kernel),-(filesystem)" #else #define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE SZ_128K +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #endif #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ #define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 7909569..9384cdd 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -19,7 +19,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/sizes.h> /*=======*/ /* Board */ @@ -86,7 +85,7 @@ #define CONFIG_NAND_DAVINCI #define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ #define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE SZ_128K +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ #define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 531baf1..71d48fb 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -22,7 +22,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/sizes.h> /* Board */ #define SFFSDR @@ -81,7 +80,7 @@ #define CONFIG_NAND_DAVINCI #define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ #define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE SZ_128K +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ #define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 82901b3..5a55c56 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -19,7 +19,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/sizes.h> /* * Define this to make U-Boot skip low level initialization when loaded @@ -119,7 +118,7 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ #define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */ -#define CONFIG_ENV_SIZE SZ_16K +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ #define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index cd40da6..a8ac786 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -98,6 +98,7 @@ #define CONFIG_DOS_PARTITION 1 /* I2C */ +#define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 8253172..b996854 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -36,13 +36,14 @@ #define CONFIG_MEESC 1 /* Board is esd MEESC */ #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ #define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */ -#define CONFIG_ENV_OVERWRITE 1 /* necessary on prototypes */ #define CONFIG_DISPLAY_BOARDINFO 1 #define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 +#define CONFIG_SERIAL_TAG 1 +#define CONFIG_REVISION_TAG 1 #undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_SKIP_LOWLEVEL_INIT @@ -138,12 +139,13 @@ #define CONFIG_SYS_USE_DATAFLASH 1 #undef CONFIG_SYS_USE_NANDFLASH -#ifdef CONFIG_SYS_USE_DATAFLASH - /* CAN */ #define CONFIG_AT91_CAN 1 -/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +/* hw-controller addresses */ +#define CONFIG_ET1100_BASE 0x70000000 + +/* bootstrap + u-boot + env in dataflash on CS0 */ #define CONFIG_ENV_IS_IN_DATAFLASH 1 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ 0x8400) @@ -151,18 +153,6 @@ #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ CONFIG_ENV_OFFSET) #define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_BOOTCOMMAND "cp.b C0042000 22000000 210000; bootm" - -#else /* CONFIG_SYS_USE_NANDFLASH */ - -/* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 22000000 A0000 200000; bootm" - -#endif #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } @@ -178,7 +168,8 @@ /* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN 0x2D000 +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ + 128*1024, 0x1000) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 61629f8..55eeb94 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -123,6 +123,7 @@ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 9f0f34b..72e9626 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -121,6 +121,7 @@ #undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 07a031b..1a91921 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -28,7 +28,7 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ -#define CONFIG_OMAP3_OVERO 1 /* working with overo */ +#define CONFIG_OMAP3_OVERO 1 /* working with overo */ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> @@ -105,10 +105,11 @@ #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ #undef CONFIG_CMD_IMI /* iminfo */ #undef CONFIG_CMD_IMLS /* List all found images */ -#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #undef CONFIG_CMD_NFS /* NFS support */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 @@ -293,4 +294,17 @@ extern unsigned int boot_flash_sec; extern unsigned int boot_flash_type; #endif +#if defined(CONFIG_CMD_NET) +/*---------------------------------------------------------------------------- + * SMSC9211 Ethernet from SMSC9118 family + *---------------------------------------------------------------------------- + */ + +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X 1 +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE 0x2C000000 + +#endif /* (CONFIG_CMD_NET) */ + #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 1cfd7e9..064c0bc 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -112,6 +112,7 @@ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 61a41e7..b55b8f0 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -119,6 +119,7 @@ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index 03f92f5..75ab980 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -140,6 +140,7 @@ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h new file mode 100644 index 0000000..2aba0cb --- /dev/null +++ b/include/configs/openrd_base.h @@ -0,0 +1,220 @@ +/* + * (C) Copyright 2009 + * Net Insight <www.netinsight.net> + * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> + * + * Based on sheevaplug.h: + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_OPENRD_BASE_H +#define _CONFIG_OPENRD_BASE_H + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nOpenRD_base" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_MARVELL 1 +#define CONFIG_ARM926EJS 1 /* Basic Architecture */ +#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ +#define CONFIG_KW88F6281 1 /* SOC Name */ +#define CONFIG_MACH_OPENRD_BASE /* Machine type */ + +#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ +#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ +#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 for kernel */ + +/* + * CLKs configurations + */ +#define CONFIG_SYS_HZ 1000 + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ + +#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ + 115200,230400, 460800, 921600 } +/* auto boot */ +#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ + +#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#include <config_cmd_default.h> +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FAT +#define CONFIG_CMD_NAND +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB + +/* + * NAND configuration + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_KIRKWOOD +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ +#define NAND_ALLOW_ERASE_ALL 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +#endif + +/* + * Environment variables configurations + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ +#else +#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ +#endif +/* + * max 4k env size is enough, but in case of nand + * it has to be rounded to sector size + */ +#define CONFIG_ENV_SIZE 0x20000 /* 128k */ +#define CONFIG_ENV_ADDR 0x60000 +#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ + "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ + "${x_bootcmd_usb}; bootm 0x6400000;" + +#define MTDIDS_DEFAULT "nand0=nand_mtd" +#define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\ + "0x400000@0x100000(uImage),"\ + "0x1fb00000@0x500000(rootfs)" + +#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ + "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ + "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ + "x_bootcmd_usb=usb start\0" \ + "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \ + "mtdids="MTDIDS_DEFAULT"\0" \ + "mtdparts="MTDPARTS_DEFAULT"\0" + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1MiB for malloc() */ +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Other required minimal configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ +#define CONFIG_NR_DRAM_BANKS 4 +#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ +#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* specify more that one ports available */ +#define CONFIG_MII /* expose smi ove miiphy interface */ +#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ +#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0x8 +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ +#endif /* CONFIG_CMD_NET */ + +/* + * USB/EHCI + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_SUPPORT_VFAT +#endif /* CONFIG_CMD_USB */ + +/* + * File system + */ +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_LZO + +#endif /* _CONFIG_OPENRD_BASE_H */ diff --git a/include/ks8721.h b/include/ks8721.h new file mode 100644 index 0000000..185d9bd --- /dev/null +++ b/include/ks8721.h @@ -0,0 +1,78 @@ +/* + * NOTE: MICREL ethernet Physical layer + * + * Version: KS8721.h + * + * Authors: Eric Benard (based on dm9161.h) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* MICREL PHYSICAL LAYER TRANSCEIVER KS8721 */ + +#define KS8721_BMCR 0 +#define KS8721_BMSR 1 +#define KS8721_PHYID1 2 +#define KS8721_PHYID2 3 +#define KS8721_ANAR 4 +#define KS8721_ANLPAR 5 +#define KS8721_ANER 6 +#define KS8721_RECR 15 +#define KS8721_MDINTR 27 +#define KS8721_100BT 31 + +/* --Bit definitions: KS8721_BMCR */ +#define KS8721_RESET (1 << 15) +#define KS8721_LOOPBACK (1 << 14) +#define KS8721_SPEED_SELECT (1 << 13) +#define KS8721_AUTONEG (1 << 12) +#define KS8721_POWER_DOWN (1 << 11) +#define KS8721_ISOLATE (1 << 10) +#define KS8721_RESTART_AUTONEG (1 << 9) +#define KS8721_DUPLEX_MODE (1 << 8) +#define KS8721_COLLISION_TEST (1 << 7) +#define KS8721_DISABLE (1 << 0) + +/*--Bit definitions: KS8721_BMSR */ +#define KS8721_100BASE_T4 (1 << 15) +#define KS8721_100BASE_TX_FD (1 << 14) +#define KS8721_100BASE_T4_HD (1 << 13) +#define KS8721_10BASE_T_FD (1 << 12) +#define KS8721_10BASE_T_HD (1 << 11) +#define KS8721_MF_PREAMB_SUPPR (1 << 6) +#define KS8721_AUTONEG_COMP (1 << 5) +#define KS8721_REMOTE_FAULT (1 << 4) +#define KS8721_AUTONEG_ABILITY (1 << 3) +#define KS8721_LINK_STATUS (1 << 2) +#define KS8721_JABBER_DETECT (1 << 1) +#define KS8721_EXTEND_CAPAB (1 << 0) + +/*--Bit definitions: KS8721_PHYID */ +#define KS8721_PHYID_OUI 0x0885 +#define KS8721_LSB_MASK 0x3F + +#define KS8721BL_MODEL 0x21 +#define KS8721_MODELMASK 0x3F0 +#define KS8721BL_REV 0x9 +#define KS8721_REVMASK 0xF + +/*--Bit definitions: KS8721_ANAR, KS8721_ANLPAR */ +#define KS8721_NP (1 << 15) +#define KS8721_ACK (1 << 14) +#define KS8721_RF (1 << 13) +#define KS8721_PAUSE (1 << 10) +#define KS8721_T4 (1 << 9) +#define KS8721_TX_FDX (1 << 8) +#define KS8721_TX_HDX (1 << 7) +#define KS8721_10_FDX (1 << 6) +#define KS8721_10_HDX (1 << 5) +#define KS8721_AN_IEEE_802_3 0x0001 + +/****************** function prototypes **********************/ +unsigned int ks8721_isphyconnected(AT91PS_EMAC p_mac); +unsigned char ks8721_getlinkspeed(AT91PS_EMAC p_mac); +unsigned char ks8721_autonegotiate(AT91PS_EMAC p_mac, int *status); +unsigned char ks8721_initphy(AT91PS_EMAC p_mac); |