diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/bf518f-ezbrd.h | 22 | ||||
| -rw-r--r-- | include/configs/bf526-ezbrd.h | 14 | ||||
| -rw-r--r-- | include/configs/bf527-ad7160-eval.h | 148 | ||||
| -rw-r--r-- | include/configs/bf527-ezkit.h | 2 | ||||
| -rw-r--r-- | include/configs/bf533-ezkit.h | 2 | ||||
| -rw-r--r-- | include/configs/bf533-stamp.h | 18 | ||||
| -rw-r--r-- | include/configs/bf537-pnav.h | 11 | ||||
| -rw-r--r-- | include/configs/bf537-stamp.h | 13 | ||||
| -rw-r--r-- | include/configs/bf538f-ezkit.h | 2 | ||||
| -rw-r--r-- | include/configs/bf548-ezkit.h | 2 | ||||
| -rw-r--r-- | include/configs/bf561-acvilon.h | 9 | ||||
| -rw-r--r-- | include/configs/bf561-ezkit.h | 2 | ||||
| -rw-r--r-- | include/configs/bfin_adi_common.h | 15 | ||||
| -rw-r--r-- | include/configs/cm-bf527.h | 2 | ||||
| -rw-r--r-- | include/configs/cm-bf537e.h | 2 | ||||
| -rw-r--r-- | include/configs/cm-bf537u.h | 2 | ||||
| -rw-r--r-- | include/configs/cm-bf548.h | 2 | ||||
| -rw-r--r-- | include/configs/ibf-dsp561.h | 14 | ||||
| -rw-r--r-- | include/configs/ip04.h | 10 | ||||
| -rw-r--r-- | include/configs/tcm-bf518.h | 2 | ||||
| -rw-r--r-- | include/configs/tcm-bf537.h | 2 | ||||
| -rw-r--r-- | include/environment.h | 21 | ||||
| -rw-r--r-- | include/nand.h | 9 | ||||
| -rw-r--r-- | include/status_led.h | 3 |
24 files changed, 233 insertions, 96 deletions
diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 1e821d9..6eec1c9 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -63,6 +63,26 @@ #if !defined(__ADSPBF512__) && !defined(__ADSPBF514__) #define ADI_CMDS_NETWORK 1 #define CONFIG_BFIN_MAC +#define CONFIG_BFIN_MAC_PINS \ + { \ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxD2, \ + P_MII0_ETxD3, \ + P_MII0_ETxEN, \ + P_MII0_TxCLK, \ + P_MII0_PHYINT, \ + P_MII0_COL, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxD2, \ + P_MII0_ERxD3, \ + P_MII0_ERxDV, \ + P_MII0_ERxCLK, \ + P_MII0_CRS, \ + P_MII0_MDC, \ + P_MII0_MDIO, \ + 0 } #define CONFIG_NETCONSOLE 1 #define CONFIG_NET_MULTI 1 #endif @@ -117,8 +137,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 711fa27..82396d0 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -134,8 +134,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* @@ -160,23 +158,19 @@ /* define to enable run status via led */ /* #define CONFIG_STATUS_LED */ #ifdef CONFIG_STATUS_LED +#define CONFIG_GPIO_LED #define CONFIG_BOARD_SPECIFIC_LED -#ifndef __ASSEMBLY__ -typedef unsigned int led_id_t; -void __led_init(led_id_t mask, int state); -void __led_set(led_id_t mask, int state); -void __led_toggle(led_id_t mask); -#endif /* use LED0 to indicate booting/alive */ #define STATUS_LED_BOOT 0 -#define STATUS_LED_BIT 1 +#define STATUS_LED_BIT GPIO_PF8 #define STATUS_LED_STATE STATUS_LED_ON #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4) /* use LED1 to indicate crash */ #define STATUS_LED_CRASH 1 -#define STATUS_LED_BIT1 2 +#define STATUS_LED_BIT1 GPIO_PG11 #define STATUS_LED_STATE1 STATUS_LED_ON #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +/* #define STATUS_LED_BIT2 GPIO_PG12 */ #endif diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h new file mode 100644 index 0000000..eb3a2b7 --- /dev/null +++ b/include/configs/bf527-ad7160-eval.h @@ -0,0 +1,148 @@ +/* + * U-boot - Configuration file for BF527 AD7160-EVAL board + */ + +#ifndef __CONFIG_BF527_AD7160_EVAL_H__ +#define __CONFIG_BF527_AD7160_EVAL_H__ + +#include <asm/config-pre.h> + + +/* + * Processor Settings + */ +#define CONFIG_BFIN_CPU bf527-0.2 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER + + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 24000000 +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF 0 +/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ +/* 1 = bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-63 (where 0 means 64) */ +#define CONFIG_VCO_MULT 25 +/* CCLK_DIV controls the core clock divider */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 + + +/* + * Memory Settings + */ +#define CONFIG_MEM_ADD_WDTH 10 +#define CONFIG_MEM_SIZE 64 + +#define CONFIG_EBIU_SDRRC_VAL 0x03F6 +#define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_3 | PASR_ALL | TRAS_6 | TRP_3 | TRCD_3 | TWR_2 | PSS) + +#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL) +#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL) +#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL) + +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) +#define CONFIG_SYS_MALLOC_LEN (640 * 1024) + + +/* + * NAND Settings + * (can't be used same time as ethernet) + */ +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) +# define CONFIG_BFIN_NFC +# define CONFIG_BFIN_NFC_BOOTROM_ECC +#endif +#ifdef CONFIG_BFIN_NFC +#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 +#define CONFIG_DRIVER_NAND_BFIN +#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#endif + + +/* + * Flash Settings + */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_BASE 0x20000000 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 259 + + +/* + * SPI Settings + */ +#define CONFIG_BFIN_SPI +#define CONFIG_ENV_SPI_MAX_HZ 30000000 +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO + + +/* + * Env Storage Settings + */ +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x10000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SIZE 0x20000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x2000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#endif + + +/* + * I2C Settings + */ +#define CONFIG_BFIN_TWI_I2C 1 +#define CONFIG_HARD_I2C 1 + + +/* + * SPI_MMC Settings + */ +#define CONFIG_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_SPI_MMC +#define CONFIG_SPI_MMC_DEFAULT_CS (7 + GPIO_PH3) + + +/* + * Misc Settings + */ +#define CONFIG_MISC_INIT_R +#define CONFIG_UART_CONSOLE 0 + + +/* + * Pull in common ADI header for remaining command/environment setup + */ +#include <configs/bfin_adi_common.h> + +#endif diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 7800c32..07e4ce8 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -138,8 +138,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index c80ddca..37a7059 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -136,8 +136,6 @@ } while (0) #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 #endif diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 80c4884..02c8bc3 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -180,8 +180,6 @@ } while (0) #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 #endif @@ -230,23 +228,19 @@ /* define to enable run status via led */ /* #define CONFIG_STATUS_LED */ #ifdef CONFIG_STATUS_LED +#define CONFIG_GPIO_LED #define CONFIG_BOARD_SPECIFIC_LED -#ifndef __ASSEMBLY__ -typedef unsigned int led_id_t; -void __led_init(led_id_t mask, int state); -void __led_set(led_id_t mask, int state); -void __led_toggle(led_id_t mask); -#endif -/* use LED1 to indicate booting/alive */ +/* use LED0 to indicate booting/alive */ #define STATUS_LED_BOOT 0 -#define STATUS_LED_BIT 1 +#define STATUS_LED_BIT GPIO_PF2 #define STATUS_LED_STATE STATUS_LED_ON #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4) -/* use LED2 to indicate crash */ +/* use LED1 to indicate crash */ #define STATUS_LED_CRASH 1 -#define STATUS_LED_BIT1 2 +#define STATUS_LED_BIT1 GPIO_PF3 #define STATUS_LED_STATE1 STATUS_LED_ON #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +/* #define STATUS_LED_BIT2 GPIO_PF4 */ #endif /* define to enable splash screen support */ diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index cf40d06..39bbb41 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -132,7 +132,6 @@ #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) -#define BFIN_NAND_READY PF12 #define BFIN_NAND_WRITE(addr, cmd) \ do { \ bfin_write8(addr, cmd); \ @@ -141,13 +140,7 @@ #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) -#define NAND_PLAT_DEV_READY(chip) (bfin_read_PORTHIO() & BFIN_NAND_READY) -#define NAND_PLAT_INIT() \ - do { \ - bfin_write_PORTH_FER(bfin_read_PORTH_FER() & ~BFIN_NAND_READY); \ - bfin_write_PORTHIO_DIR(bfin_read_PORTHIO_DIR() & ~BFIN_NAND_READY); \ - bfin_write_PORTHIO_INEN(bfin_read_PORTHIO_INEN() | BFIN_NAND_READY); \ - } while (0) +#define NAND_PLAT_GPIO_DEV_READY GPIO_PF12 /* @@ -155,8 +148,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 92ceb38..96704d7 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -137,8 +137,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* @@ -157,7 +155,6 @@ #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) -#define BFIN_NAND_READY PF3 #define BFIN_NAND_WRITE(addr, cmd) \ do { \ bfin_write8(addr, cmd); \ @@ -166,13 +163,7 @@ #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) -#define NAND_PLAT_DEV_READY(chip) (bfin_read_PORTFIO() & BFIN_NAND_READY) -#define NAND_PLAT_INIT() \ - do { \ - bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~BFIN_NAND_READY); \ - bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() & ~BFIN_NAND_READY); \ - bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() | BFIN_NAND_READY); \ - } while (0) +#define NAND_PLAT_GPIO_DEV_READY GPIO_PF3 /* @@ -268,8 +259,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -/* #define CONFIG_BF537_STAMP_LEDCMD 1 */ - /* Define if want to do post memory test */ #undef CONFIG_POST #ifdef CONFIG_POST diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index 59e0565..1c14b6b 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -134,8 +134,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index f9c9711..60cca0c 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -140,8 +140,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 0be170c..0c0204f 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -131,7 +131,6 @@ #define CONFIG_ENV_SECT_SIZE (1056 * 8) #define CONFIG_ENV_OFFSET ((16 + 256) * 1056) #define CONFIG_ENV_SIZE (8 * 1056) -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) /* @@ -145,7 +144,6 @@ #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 3)) -#define BFIN_NAND_READY PF10 #define BFIN_NAND_WRITE(addr, cmd) \ do { \ bfin_write8(addr, cmd); \ @@ -154,12 +152,7 @@ #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) -#define NAND_PLAT_DEV_READY(chip) (bfin_read_FIO0_FLAG_D() & BFIN_NAND_READY) -#define NAND_PLAT_INIT() \ - do { \ - bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() & ~BFIN_NAND_READY); \ - bfin_write_FIO0_INEN(bfin_read_FIO0_INEN() | BFIN_NAND_READY); \ - } while (0) +#define NAND_PLAT_GPIO_DEV_READY GPIO_PF10 /* diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 1e3fdef..036bfe4 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -151,8 +151,6 @@ } while (0) #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 #endif diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 1896cf5..901a32f 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -83,6 +83,7 @@ # define CONFIG_CMD_CPLBINFO # define CONFIG_CMD_ELF # define CONFIG_ELF_SIMPLE_LOAD +# define CONFIG_CMD_GPIO # define CONFIG_CMD_KGDB # define CONFIG_CMD_REGINFO # define CONFIG_CMD_STRINGS @@ -247,12 +248,26 @@ # define CONFIG_SYS_AUTOLOAD "no" # endif # endif +# define CONFIG_IP_DEFRAG # define CONFIG_NET_RETRY_COUNT 20 #endif /* + * I2C Settings + */ +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +# ifndef CONFIG_SYS_I2C_SPEED +# define CONFIG_SYS_I2C_SPEED 50000 +# endif +# ifndef CONFIG_SYS_I2C_SLAVE +# define CONFIG_SYS_I2C_SLAVE 0 +# endif +#endif + +/* * Misc Settings */ +#define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */ #define CONFIG_LZMA #endif diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index ad1dd12..e0c6d53 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -117,8 +117,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 8d0bc12..742df9c 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -119,8 +119,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index bbea3ab..9def99f 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -120,8 +120,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 93c4c8d..63b9399 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -107,8 +107,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index 2eef5ef..2c0a263 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -58,6 +58,18 @@ /* + * Network Settings + */ +#define ADI_CMDS_NETWORK 1 +#define CONFIG_NET_MULTI +#define CONFIG_DRIVER_AX88180 1 +#define AX88180_BASE 0x2c000000 +#define CONFIG_HOSTNAME ibf-dsp561 +/* Uncomment next line to use fixed MAC address */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ + + +/* * Flash Settings */ #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ @@ -126,8 +138,6 @@ } while (0) #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 #endif diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 425a745..c024d78 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -116,7 +116,6 @@ #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) -#define BFIN_NAND_READY PF10 #define BFIN_NAND_WRITE(addr, cmd) \ do { \ bfin_write8(addr, cmd); \ @@ -125,14 +124,7 @@ #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) -#define NAND_PLAT_DEV_READY(chip) (bfin_read_FIO_FLAG_D() & BFIN_NAND_READY) -#define NAND_PLAT_INIT() \ - do { \ - bfin_write_FIO_DIR(bfin_read_FIO_DIR() & ~BFIN_NAND_READY); \ - bfin_write_FIO_INEN(bfin_read_FIO_INEN() | BFIN_NAND_READY); \ - bfin_write_FIO_EDGE(bfin_read_FIO_EDGE() & ~BFIN_NAND_READY); \ - bfin_write_FIO_POLAR(bfin_read_FIO_POLAR() & ~BFIN_NAND_READY); \ - } while (0) +#define NAND_PLAT_GPIO_DEV_READY GPIO_PF10 /* diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index 9c04d8a..52055e8 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -106,8 +106,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 409a042..24ce8f8 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -120,8 +120,6 @@ */ #define CONFIG_BFIN_TWI_I2C 1 #define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* diff --git a/include/environment.h b/include/environment.h index 203f731..fbccf6a 100644 --- a/include/environment.h +++ b/include/environment.h @@ -74,15 +74,24 @@ #endif /* CONFIG_ENV_IS_IN_FLASH */ #if defined(CONFIG_ENV_IS_IN_NAND) -# ifndef CONFIG_ENV_OFFSET -# error "Need to define CONFIG_ENV_OFFSET when using CONFIG_ENV_IS_IN_NAND" -# endif +# if defined(CONFIG_ENV_OFFSET_OOB) +# ifdef CONFIG_ENV_OFFSET_REDUND +# error "CONFIG_ENV_OFFSET_REDUND is not supported when CONFIG_ENV_OFFSET_OOB" +# error "is set" +# endif +extern unsigned long nand_env_oob_offset; +# define CONFIG_ENV_OFFSET nand_env_oob_offset +# else +# ifndef CONFIG_ENV_OFFSET +# error "Need to define CONFIG_ENV_OFFSET when using CONFIG_ENV_IS_IN_NAND" +# endif +# ifdef CONFIG_ENV_OFFSET_REDUND +# define CONFIG_SYS_REDUNDAND_ENVIRONMENT +# endif +# endif /* CONFIG_ENV_OFFSET_OOB */ # ifndef CONFIG_ENV_SIZE # error "Need to define CONFIG_ENV_SIZE when using CONFIG_ENV_IS_IN_NAND" # endif -# ifdef CONFIG_ENV_OFFSET_REDUND -# define CONFIG_SYS_REDUNDAND_ENVIRONMENT -# endif #endif /* CONFIG_ENV_IS_IN_NAND */ #if defined(CONFIG_ENV_IS_IN_MG_DISK) diff --git a/include/nand.h b/include/nand.h index 2a81597..8bdf419 100644 --- a/include/nand.h +++ b/include/nand.h @@ -130,3 +130,12 @@ void board_nand_select_device(struct nand_chip *nand, int chip); __attribute__((noreturn)) void nand_boot(void); #endif + +#ifdef CONFIG_ENV_OFFSET_OOB +#define ENV_OOB_MARKER 0x30425645 /*"EVB0" in little-endian -- offset is stored + as block number*/ +#define ENV_OOB_MARKER_OLD 0x30564e45 /*"ENV0" in little-endian -- offset is + stored as byte number */ +#define ENV_OFFSET_SIZE 8 +int get_nand_env_oob(nand_info_t *nand, unsigned long *result); +#endif diff --git a/include/status_led.h b/include/status_led.h index 9dbf01f..f213595 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -346,9 +346,6 @@ void status_led_set (int led, int state); #elif defined(CONFIG_NIOS2) /* XXX empty just to avoid the error */ /************************************************************************/ -#elif defined(CONFIG_BLACKFIN) -/* XXX empty just to avoid the error */ -/************************************************************************/ #elif defined(CONFIG_V38B) # define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */ |