diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/vpac270.h | 106 |
1 files changed, 61 insertions, 45 deletions
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index d3e22d9..694a8f9 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -10,7 +10,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -19,8 +19,8 @@ * MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __CONFIG_H +#define __CONFIG_H /* * High Level Board Configuration Options @@ -28,20 +28,13 @@ #define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ #define CONFIG_VPAC270 1 /* Voipac PXA270 board */ -#undef BOARD_LATE_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT -#undef CONFIG_USE_IRQ -#undef CONFIG_SKIP_LOWLEVEL_INIT - /* * Environment settings */ -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_MALLOC_LEN (128*1024) #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_ENV_OVERWRITE /* override default environment */ - #define CONFIG_BOOTCOMMAND \ "if mmc init && fatload mmc 0 0xa4000000 uImage; then " \ "bootm 0xa4000000; " \ @@ -49,6 +42,9 @@ "if usb reset && fatload usb 0 0xa4000000 uImage; then " \ "bootm 0xa4000000; " \ "fi; " \ + "if ide reset && fatload ide 0 0xa4000000 uImage; then " \ + "bootm 0xa4000000; " \ + "fi; " \ "bootm 0x40000;" #define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" #define CONFIG_TIMESTAMP @@ -97,9 +93,9 @@ #define CONFIG_NET_MULTI 1 #define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x08000300 /* CS2 */ -#define DM9000_IO (CONFIG_DM9000_BASE) -#define DM9000_DATA (CONFIG_DM9000_BASE + 4) +#define CONFIG_DM9000_BASE 0x08000300 /* CS2 */ +#define DM9000_IO (CONFIG_DM9000_BASE) +#define DM9000_DATA (CONFIG_DM9000_BASE + 4) #define CONFIG_NET_RETRY_COUNT 10 #define CONFIG_BOOTP_BOOTFILESIZE @@ -116,6 +112,7 @@ #define CONFIG_PXA_MMC #define CONFIG_SYS_MMC_BASE 0xF0000000 #define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #endif @@ -123,8 +120,8 @@ * KGDB */ #ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* @@ -133,16 +130,17 @@ #define CONFIG_SYS_HUSH_PARSER 1 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LONGHELP #ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "$ " #else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "=> " #endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_DEVICE_NULLDEV 1 /* @@ -150,12 +148,10 @@ */ #undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ -#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ +#define CONFIG_SYS_CPUSPEED 0x190 /* 312MHz */ /* * Stack sizes - * - * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ #ifdef CONFIG_USE_IRQ @@ -166,17 +162,24 @@ /* * DRAM Map */ -#define CONFIG_NR_DRAM_BANKS 2 /* We have 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 2 /* 2 banks of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ + +#ifdef CONFIG_256M_U_BOOT #define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #2 */ #define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ +#endif #define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ +#ifdef CONFIG_256M_U_BOOT #define CONFIG_SYS_DRAM_SIZE 0x10000000 /* 256 MB DRAM */ +#else +#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */ +#endif -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR (0x5c000000) @@ -185,14 +188,22 @@ */ #if defined(CONFIG_CMD_FLASH) /* NOR */ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +#ifdef CONFIG_256M_U_BOOT #define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */ +#endif #define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER 1 #define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) +#ifdef CONFIG_256M_U_BOOT #define CONFIG_SYS_MAX_FLASH_BANKS 2 #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } +#else +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#endif #define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) #define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) @@ -200,25 +211,26 @@ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 #define CONFIG_SYS_FLASH_PROTECTION 1 -#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x4000 #elif defined(CONFIG_CMD_ONENAND) /* OneNAND */ #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_ONENAND_BASE 0x00000000 + #define CONFIG_ENV_IS_IN_ONENAND 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 #else /* No flash */ #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_ENV_IS_NOWHERE #endif -#define CONFIG_SYS_MONITOR_BASE 0x000000 +#define CONFIG_SYS_MONITOR_BASE 0x0 #define CONFIG_SYS_MONITOR_LEN 0x40000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE 0x40000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#define CONFIG_ENV_ADDR 0x40000 +#define CONFIG_ENV_SIZE 0x4000 /* * IDE @@ -230,15 +242,15 @@ #define __io -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 +#define CONFIG_SYS_IDE_MAXBUS 1 +#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_SYS_ATA_BASE_ADDR 0x0c000000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0 +#define CONFIG_SYS_ATA_BASE_ADDR 0x0c000000 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0 -#define CONFIG_SYS_ATA_DATA_OFFSET 0x120 -#define CONFIG_SYS_ATA_REG_OFFSET 0x120 -#define CONFIG_SYS_ATA_ALT_OFFSET 0x120 +#define CONFIG_SYS_ATA_DATA_OFFSET 0x120 +#define CONFIG_SYS_ATA_REG_OFFSET 0x120 +#define CONFIG_SYS_ATA_ALT_OFFSET 0x120 #define CONFIG_SYS_ATA_STRIDE 2 #endif @@ -284,7 +296,11 @@ #define CONFIG_SYS_MSC0_VAL 0x3ffc95fa #define CONFIG_SYS_MSC1_VAL 0x02ccf974 #define CONFIG_SYS_MSC2_VAL 0x00000000 +#ifdef CONFIG_256M_U_BOOT #define CONFIG_SYS_MDCNFG_VAL 0x8ad30ad3 +#else +#define CONFIG_SYS_MDCNFG_VAL 0x88000ad3 +#endif #define CONFIG_SYS_MDREFR_VAL 0x201fe01e #define CONFIG_SYS_MDMRS_VAL 0x00000000 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 @@ -306,13 +322,13 @@ * LCD */ #ifdef CONFIG_LCD -#define CONFIG_VOIPAC_LCD +#define CONFIG_VOIPAC_LCD #endif /* * USB */ -#ifdef CONFIG_CMD_USB +#ifdef CONFIG_CMD_USB #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_BOARD_INIT |