diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/M5253EVBE.h | 2 | ||||
| -rw-r--r-- | include/configs/M5282EVB.h | 2 | ||||
| -rw-r--r-- | include/configs/M5329EVB.h | 2 | ||||
| -rw-r--r-- | include/configs/M54455EVB.h | 36 | ||||
| -rw-r--r-- | include/configs/atstk1002.h | 11 |
5 files changed, 26 insertions, 27 deletions
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 48170e7..f5e1b64 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -146,7 +146,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ #ifdef CONFIG_MONITOR_IS_IN_RAM #define CFG_MONITOR_BASE 0x20000 diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 3c17c1e..7bb9f60 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -163,7 +163,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #define CFG_INT_FLASH_BASE 0xf0000000 #define CFG_INT_FLASH_ENABLE 0x21 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index d3b1605..47d74a3 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -175,7 +175,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x40000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 32 /* SDRAM size in MB */ #define CFG_SDRAM_CFG1 0x53722730 #define CFG_SDRAM_CFG2 0x56670000 #define CFG_SDRAM_CTRL 0xE1092000 diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 6f4859c..ba050cb 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -27,8 +27,8 @@ * board/config.h - configuration options, board specific */ -#ifndef _JAMICA54455_H -#define _JAMICA54455_H +#ifndef _M54455EVB_H +#define _M54455EVB_H /* * High Level Configuration Options @@ -75,7 +75,7 @@ #define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_NET -#define CONFIG_CMD_PCI +#undef CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO @@ -129,8 +129,8 @@ "u-boot=u-boot.bin\0" \ "load=tftp ${loadaddr) ${u-boot}\0" \ "upd=run load; run prog\0" \ - "prog=prot off 0 2ffff;" \ - "era 0 2ffff;" \ + "prog=prot off 4000000 402ffff;" \ + "era 4000000 402ffff;" \ "cp.b ${loadaddr} 0 ${filesize};" \ "save\0" \ "" @@ -174,6 +174,7 @@ #define CFG_IMMR CFG_MBAR /* PCI */ +#ifdef CONFIG_CMD_PCI #define CONFIG_PCI 1 #define CFG_PCI_MEM_BUS 0xA0000000 @@ -187,6 +188,7 @@ #define CFG_PCI_CFG_BUS 0xB0000000 #define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS #define CFG_PCI_CFG_SIZE 0x01000000 +#endif /* FPGA - Spartan 2 */ /* experiment @@ -268,8 +270,6 @@ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ -#define CFG_ENV_OFFSET 0x4000 -#define CFG_ENV_SECT_SIZE 0x2000 #define CFG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_OVERWRITE 1 #undef CFG_ENV_IS_EMBEDDED @@ -278,13 +278,17 @@ * FLASH organization */ #ifdef CFG_ATMEL_BOOT -# define CFG_FLASH_BASE 0 +# define CFG_FLASH_BASE CFG_CS0_BASE # define CFG_FLASH0_BASE CFG_CS0_BASE # define CFG_FLASH1_BASE CFG_CS1_BASE +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) +# define CFG_ENV_SECT_SIZE 0x2000 #else # define CFG_FLASH_BASE CFG_FLASH0_BASE # define CFG_FLASH0_BASE CFG_CS1_BASE # define CFG_FLASH1_BASE CFG_CS0_BASE +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000) +# define CFG_ENV_SECT_SIZE 0x20000 #endif /* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system @@ -328,9 +332,9 @@ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ #ifdef CFG_ATMEL_BOOT -# define CONFIG_JFFS2_DEV "nor0" +# define CONFIG_JFFS2_DEV "nor1" # define CONFIG_JFFS2_PART_SIZE 0x01000000 -# define CONFIG_JFFS2_PART_OFFSET CFG_FLASH1_BASE +# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH1_BASE + 0x500000) #else # define CONFIG_JFFS2_DEV "nor0" # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) @@ -356,20 +360,20 @@ #ifdef CFG_ATMEL_BOOT /* Atmel Flash */ -#define CFG_CS0_BASE 0 +#define CFG_CS0_BASE 0x04000000 #define CFG_CS0_MASK 0x00070001 #define CFG_CS0_CTRL 0x00001140 /* Intel Flash */ -#define CFG_CS1_BASE 0x04000000 +#define CFG_CS1_BASE 0x00000000 #define CFG_CS1_MASK 0x01FF0001 -#define CFG_CS1_CTRL 0x003F3D60 +#define CFG_CS1_CTRL 0x00000D60 #define CFG_ATMEL_BASE CFG_CS0_BASE #else /* Intel Flash */ -#define CFG_CS0_BASE 0 +#define CFG_CS0_BASE 0x00000000 #define CFG_CS0_MASK 0x01FF0001 -#define CFG_CS0_CTRL 0x003F3D60 +#define CFG_CS0_CTRL 0x00000D60 /* Atmel Flash */ #define CFG_CS1_BASE 0x04000000 #define CFG_CS1_MASK 0x00070001 @@ -388,4 +392,4 @@ #define CFG_CS3_MASK 0x00070001 #define CFG_CS3_CTRL 0x00000020 -#endif /* _JAMICA54455_H */ +#endif /* _M54455EVB_H */ diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 1809fc5..b33e26f 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -114,15 +114,10 @@ #define CONFIG_AUTOBOOT_STOP_STR " " /* - * These are "locally administered ethernet addresses" generated by - * ./tools/gen_eth_addr - * - * After booting the board for the first time, new addresses should be - * generated and assigned to the environment variables "ethaddr" and - * "eth1addr". + * After booting the board for the first time, new ethernet addresses + * should be generated and assigned to the environment variables + * "ethaddr" and "eth1addr". This is normally done during production. */ -#define CONFIG_ETHADDR 6a:87:71:14:cd:cb -#define CONFIG_ETH1ADDR ca:f8:15:e6:3e:e6 #define CONFIG_OVERWRITE_ETHADDR_ONCE 1 #define CONFIG_NET_MULTI 1 |