diff options
Diffstat (limited to 'include')
45 files changed, 0 insertions, 60 deletions
diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h index 6d8780a..4a8acab 100644 --- a/include/configs/SMN42.h +++ b/include/configs/SMN42.h @@ -31,7 +31,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 9cd0bc6..36a2a46 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -42,7 +42,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index cde5aed..49c923f 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -44,7 +44,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index fb9d0a5..15de310 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -69,8 +69,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * Size of malloc() pool diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 02401b8..5e7dee5 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -49,7 +49,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 05e12dd..401478b 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -47,7 +47,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 0905638..f6cb406 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -43,7 +43,6 @@ #ifndef CONFIG_SYS_USE_BOOT_NORFLASH #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 67288d0..de74dcf 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -47,7 +47,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 22054cf..8dbd082 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -44,7 +44,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index ff4f306..a197635 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -68,8 +68,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index a523189..23bfbeb 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -29,7 +29,6 @@ #define CONFIG_VPAC270 1 /* Toradex Colibri PXA270 board */ #undef BOARD_LATE_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #undef CONFIG_USE_IRQ #undef CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index 5f40908..f31081d 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -28,7 +28,6 @@ #ifdef CONFIG_CPUAT91_RAM #define CONFIG_SKIP_LOWLEVEL_INIT 1 -#define CONFIG_SKIP_RELOCATE_UBOOT 1 #else #define CONFIG_BOOTDELAY 1 #endif diff --git a/include/configs/csb637.h b/include/configs/csb637.h index f92f3c7..7a85d65 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -69,8 +69,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * Size of malloc() pool diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 906b8e7..1feada9 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_TEXT_BASE 0xc1080000 /* diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index d4c3697..8a69052 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -24,7 +24,6 @@ #define DAVINCI_DM355EVM #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index 4b1f029..c953032 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -23,7 +23,6 @@ #define DAVINCI_DM355LEOPARD #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index 04b6044..b78fe83 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -24,7 +24,6 @@ #define DAVINCI_DM365EVM #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ #define CONFIG_SYS_CONSOLE_INFO_QUIET diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 6b5d865..f0a8e98 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -24,7 +24,6 @@ #define DAVINCI_DM6467EVM #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* SoC Configuration */ #define CONFIG_ARM926EJS /* arm926ejs CPU */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index ec05aba..186726d 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -133,7 +133,6 @@ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #endif #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_HW_ECC @@ -143,10 +142,8 @@ #elif defined(CONFIG_SYS_USE_NOR) #ifdef CONFIG_NOR_UART_BOOT #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #else #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #endif #define CONFIG_ENV_IS_IN_FLASH #undef CONFIG_SYS_NO_FLASH diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 409c5a4..967ebcc 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -88,7 +88,6 @@ #define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index c7e0e56..4d866d0 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -83,7 +83,6 @@ #define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 3035f79..0dc89ef 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -122,7 +122,6 @@ #define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */ #define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ @@ -131,10 +130,8 @@ #elif defined(CONFIG_SYS_USE_NOR) #ifdef CONFIG_NOR_UART_BOOT #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #else #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #endif #define CONFIG_ENV_IS_IN_FLASH #undef CONFIG_SYS_NO_FLASH diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index 5c05e4d..69c6420 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -32,7 +32,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #define CONFIG_SKIP_LOWLEVEL_INIT 1 -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index 82e70f7..fd39ab4 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -39,7 +39,6 @@ * we use lowlevel_init (!CONFIG_SKIP_LOWLEVEL_INIT) to remedy that problem. */ #undef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT 1 /* * High Level Configuration Options diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h index a2edaf9..cfb7cea 100644 --- a/include/configs/kb9202.h +++ b/include/configs/kb9202.h @@ -53,8 +53,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* undef this for direct boot from */ - /* NOR flash without preloader */ #define CONFIG_SYS_LONGHELP diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index a0fe32e..17972d7 100644 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -31,7 +31,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 41a953e..a27b36b 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -48,7 +48,6 @@ #undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_MISC_INIT_R /* Call misc_init_r */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 956603a..8e398d7 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -73,8 +73,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 47e7c86..3b90a01 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -47,7 +47,6 @@ #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index f31fc4e..b6868b2 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -28,7 +28,6 @@ /* High Level Configuration Options */ #define CONFIG_MX51 /* in a mx51 */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_MX5_HCLK 24000000 #define CONFIG_SYS_MX5_CLK32 32768 diff --git a/include/configs/netstar.h b/include/configs/netstar.h index ee5a995..f159013 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -119,9 +119,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/*#define CONFIG_SKIP_RELOCATE_UBOOT*/ -/*#define CONFIG_SKIP_LOWLEVEL_INIT */ - /* * Partitions (mtdparts command line support) */ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index af0202c..ca3bf26 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -48,7 +48,6 @@ #undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index aee842f..7fcc9ba 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -152,7 +152,6 @@ #define CONFIG_INITRD_TAG 1 #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 42ec855..619af2d 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -161,7 +161,6 @@ #define CONFIG_INITRD_TAG 1 #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_USER_LOWLEVEL_INIT 1 /* diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 2fbe5c6..3ed6b56 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -47,7 +47,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 1ff35e3..c1c7f80 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -42,7 +42,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */ -#undef CONFIG_SKIP_RELOCATE_UBOOT /* define for developing */ #define CONFIG_SYS_TEXT_BASE 0x0 /* diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 47b8a55..541aec0 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -40,8 +40,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SKIP_RELOCATE_UBOOT - /* input clock of PLL: has 24MHz input clock at S5PC110 */ #define CONFIG_SYS_CLK_FREQ_C110 24000000 diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index cdbe710..00f4dc9 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -54,7 +54,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/shannon.h b/include/configs/shannon.h index e02d5e7..c0e6643 100644 --- a/include/configs/shannon.h +++ b/include/configs/shannon.h @@ -34,7 +34,6 @@ */ #define CONFIG_INFERNO /* we are using the inferno bootldr */ #define CONFIG_SKIP_LOWLEVEL_INIT 1 -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index f89fc3e..671f2c7 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -40,8 +40,6 @@ #define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */ #define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */ -#define CONFIG_SKIP_RELOCATE_UBOOT - #define CONFIG_PERIPORT_REMAP #define CONFIG_PERIPORT_BASE 0x70000000 #define CONFIG_PERIPORT_SIZE 0x13 diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 6bea5b2..e36b262 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -45,8 +45,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SKIP_RELOCATE_UBOOT - /* input clock of PLL: SMDKC100 has 12MHz input clock */ #define CONFIG_SYS_CLK_FREQ 12000000 diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index 31a0bdf..7b18022 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -63,7 +63,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 67dca27..a5c116b 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -195,8 +195,6 @@ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_GBL_DATA_OFFSET) -#undef CONFIG_SKIP_RELOCATE_UBOOT - #define CONFIG_BOARD_EARLY_INIT_F /* 166 MHz DDR RAM */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index a8b88da..615d5c1 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_TEXT_BASE 0x0 #undef BOARD_LATE_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #undef CONFIG_USE_IRQ #undef CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 4ecef94..1e03b01 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -45,7 +45,6 @@ #undef CONFIG_MMC #define BOARD_LATE_INIT 1 -#undef CONFIG_SKIP_RELOCATE_UBOOT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* we will never enable dcache, because we have to setup MMU first */ |