diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/imx31_litekit.h | 4 | ||||
| -rw-r--r-- | include/configs/imx31_phycore.h | 2 | ||||
| -rw-r--r-- | include/configs/mx31ads.h | 4 | ||||
| -rw-r--r-- | include/configs/mx31pdk.h | 4 | ||||
| -rw-r--r-- | include/configs/mx51evk.h | 2 | ||||
| -rw-r--r-- | include/configs/qong.h | 6 | ||||
| -rw-r--r-- | include/configs/vision2.h | 214 | ||||
| -rw-r--r-- | include/mc13892.h | 3 | ||||
| -rw-r--r-- | include/mxc_gpio.h | 52 |
9 files changed, 280 insertions, 11 deletions
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 4904856..88c62d1 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -66,13 +66,13 @@ #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 #define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH) +#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC #define CONFIG_FSL_PMIC_BUS 1 #define CONFIG_FSL_PMIC_CS 0 #define CONFIG_FSL_PMIC_CLK 1000000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_2 | SPI_CS_HIGH) +#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_RTC_MC13783 1 diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 1dbafa0..62944a9 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -183,7 +183,7 @@ #ifdef CONFIG_IMX31_PHYCORE_EET #define BOARD_LATE_INIT -#define CONFIG_MX31_GPIO 1 +#define CONFIG_MXC_GPIO #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index dedecd7..57955df 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -63,13 +63,13 @@ #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 #define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH) +#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC #define CONFIG_FSL_PMIC_BUS 1 #define CONFIG_FSL_PMIC_CS 0 #define CONFIG_FSL_PMIC_CLK 1000000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_2 | SPI_CS_HIGH) +#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_RTC_MC13783 1 /* allow to overwrite serial and ethaddr */ diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 0414cc3..4b4fb1a 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -67,13 +67,13 @@ #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 #define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH) +#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC #define CONFIG_FSL_PMIC_BUS 1 #define CONFIG_FSL_PMIC_CS 2 #define CONFIG_FSL_PMIC_CLK 1000000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_2 | SPI_CS_HIGH) +#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_RTC_MC13783 1 /* allow to overwrite serial and ethaddr */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 86a4731..8864f3a 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -73,7 +73,7 @@ #define CONFIG_FSL_PMIC_BUS 0 #define CONFIG_FSL_PMIC_CS 0 #define CONFIG_FSL_PMIC_CLK 2500000 -#define CONFIG_FSL_PMIC_MODE (SPI_CPOL | SPI_CS_HIGH) +#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) /* * MMC Configs diff --git a/include/configs/qong.h b/include/configs/qong.h index 7a68b7b..cbb53dd 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -52,18 +52,18 @@ #define CONFIG_MXC_UART 1 #define CONFIG_SYS_MX31_UART1 1 -#define CONFIG_MX31_GPIO +#define CONFIG_MXC_GPIO #define CONFIG_MXC_SPI #define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH) +#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_RTC_MC13783 #define CONFIG_FSL_PMIC #define CONFIG_FSL_PMIC_BUS 1 #define CONFIG_FSL_PMIC_CS 0 #define CONFIG_FSL_PMIC_CLK 100000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_2 | SPI_CS_HIGH) +#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) /* FPGA */ #define CONFIG_QONG_FPGA 1 diff --git a/include/configs/vision2.h b/include/configs/vision2.h new file mode 100644 index 0000000..44a6f8b --- /dev/null +++ b/include/configs/vision2.h @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * Configuration settings for the MX51-3Stack Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> + +#define CONFIG_MX51 /* in a mx51 */ +#define CONFIG_L2_OFF + +#define CONFIG_MX51_HCLK_FREQ 24000000 +#define CONFIG_MX51_CLK32 32768 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define BOARD_LATE_INIT + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (2048 * 1024) + +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX51_UART3 +#define CONFIG_MXC_GPIO +#define CONFIG_MXC_SPI +#define CONFIG_HW_WATCHDOG + + /* + * SPI Configs + * */ +#define CONFIG_FSL_SF +#define CONFIG_CMD_SF + +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO + +/* + * Use gpio 4 pin 25 as chip select for SPI flash + * This corresponds to gpio 121 + */ +#define CONFIG_SPI_FLASH_CS (1 | (121 << 8)) +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 25000000 + +#define CONFIG_ENV_SPI_CS (1 | (121 << 8)) +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_MAX_HZ 25000000 +#define CONFIG_ENV_SPI_MODE SPI_MODE_0 + +#define CONFIG_ENV_OFFSET (6 * 64 * 1024) +#define CONFIG_ENV_SECT_SIZE (1 * 64 * 1024) +#define CONFIG_ENV_SIZE (4 * 1024) + +#define CONFIG_FSL_ENV_IN_SF +#define CONFIG_ENV_IS_IN_SPI_FLASH + +/* PMIC Controller */ +#define CONFIG_FSL_PMIC +#define CONFIG_FSL_PMIC_BUS 0 +#define CONFIG_FSL_PMIC_CS 0 +#define CONFIG_FSL_PMIC_CLK 2500000 +#define CONFIG_FSL_PMIC_MODE SPI_MODE_0 +#define CONFIG_RTC_MC13783 + +/* + * MMC Configs + */ +#define CONFIG_FSL_ESDHC +#ifdef CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR (0x70004000) +#define CONFIG_SYS_FSL_ESDHC_NUM 1 + +#define CONFIG_MMC + +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_CMD_DATE + +/* + * Eth Configs + */ +#define CONFIG_HAS_ETH1 +#define CONFIG_NET_MULTI +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY + +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE FEC_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x1F + +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 3 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_SPI +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=0x90800000\0" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "Vision II U-boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 64 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START 0x90000000 +#define CONFIG_SYS_MEMTEST_END 0x10000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "Vision II U-boot > " + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (256 * 1024 * 1024) +#define PHYS_SDRAM_2 CSD1_BASE_ADDR +#define PHYS_SDRAM_2_SIZE (256 * 1024 * 1024) +#define CONFIG_SYS_SDRAM_BASE 0x90000000 +#define CONFIG_SYS_INIT_RAM_ADDR 0x1FFE8000 + +#ifndef CONFIG_SYS_ARM_WITHOUT_RELOC +#define CONFIG_SYS_INIT_RAM_END (64 * 1024) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_GBL_DATA_OFFSET) +#undef CONFIG_SKIP_RELOCATE_UBOOT +#else +#define CONFIG_SKIP_RELOCATE_UBOOT +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + 0x2000) +#endif + +#define CONFIG_BOARD_EARLY_INIT_F + +/* 166 MHz DDR RAM */ +#define CONFIG_SYS_DDR_CLKSEL 0 +#define CONFIG_SYS_CLKTL_CBCDR 0x19239100 + +#define CONFIG_SYS_NO_FLASH + +#endif /* __CONFIG_H */ diff --git a/include/mc13892.h b/include/mc13892.h index b291757..791e3ec 100644 --- a/include/mc13892.h +++ b/include/mc13892.h @@ -157,4 +157,7 @@ #define VSDSTBY (1 << 19) #define VSDMODE (1 << 20) +/* Reg Power Control 2*/ +#define WDIRESET (1 << 12) + #endif diff --git a/include/mxc_gpio.h b/include/mxc_gpio.h new file mode 100644 index 0000000..002ba61 --- /dev/null +++ b/include/mxc_gpio.h @@ -0,0 +1,52 @@ +/* + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MXC_GPIO_H +#define __MXC_GPIO_H + +enum mxc_gpio_direction { + MXC_GPIO_DIRECTION_IN, + MXC_GPIO_DIRECTION_OUT, +}; + +#ifdef CONFIG_MXC_GPIO +extern int mxc_gpio_direction(unsigned int gpio, + enum mxc_gpio_direction direction); +extern void mxc_gpio_set(unsigned int gpio, unsigned int value); +extern int mxc_gpio_get(unsigned int gpio); +#else +static inline int mxc_gpio_direction(unsigned int gpio, + enum mxc_gpio_direction direction) +{ + return 1; +} +static inline int mxc_gpio_get(unsigned int gpio) +{ + return 1; +} +static inline void mxc_gpio_set(unsigned int gpio, unsigned int value) +{ +} +#endif + +#endif |