diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-ppc/e300.h | 2 | ||||
| -rw-r--r-- | include/asm-ppc/fsl_i2c.h | 4 | ||||
| -rw-r--r-- | include/asm-ppc/global_data.h | 16 | ||||
| -rw-r--r-- | include/asm-ppc/i2c.h | 103 | ||||
| -rw-r--r-- | include/asm-ppc/immap_83xx.h | 2130 | ||||
| -rw-r--r-- | include/asm-ppc/immap_qe.h | 550 | ||||
| -rw-r--r-- | include/common.h | 5 | ||||
| -rw-r--r-- | include/configs/MPC8349EMDS.h | 70 | ||||
| -rw-r--r-- | include/configs/MPC8349ITX.h | 804 | ||||
| -rw-r--r-- | include/configs/MPC8360EMDS.h | 635 | ||||
| -rw-r--r-- | include/configs/TQM834x.h | 28 | ||||
| -rw-r--r-- | include/i2c.h | 45 | ||||
| -rw-r--r-- | include/ioports.h | 11 | ||||
| -rw-r--r-- | include/mpc83xx.h | 138 |
14 files changed, 3783 insertions, 758 deletions
diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h index 908007c..79dcae4 100644 --- a/include/asm-ppc/e300.h +++ b/include/asm-ppc/e300.h @@ -12,6 +12,8 @@ #define PVR_83xx 0x80830000 #define PVR_8349_REV10 (PVR_83xx | 0x0010) #define PVR_8349_REV11 (PVR_83xx | 0x0011) +#define PVR_8360_REV10 (PVR_83xx | 0x0020) +#define PVR_8360_REV11 (PVR_83xx | 0x0020) /* * Hardware Implementation-Dependent Register 0 (HID0) diff --git a/include/asm-ppc/fsl_i2c.h b/include/asm-ppc/fsl_i2c.h index 76b1c43..4f71341 100644 --- a/include/asm-ppc/fsl_i2c.h +++ b/include/asm-ppc/fsl_i2c.h @@ -83,8 +83,4 @@ typedef struct fsl_i2c { u8 res6[0xE8]; } fsl_i2c_t; - -#define I2C_READ 1 -#define I2C_WRITE 0 - #endif /* _ASM_I2C_H_ */ diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index b73af96..8bc61b6 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -52,17 +52,29 @@ typedef struct global_data { #if defined(CONFIG_MPC83XX) /* There are other clocks in the MPC83XX */ u32 csb_clk; +#if defined (CONFIG_MPC8349) u32 tsec1_clk; u32 tsec2_clk; - u32 core_clk; u32 usbmph_clk; u32 usbdr_clk; - u32 i2c_clk; +#endif /* CONFIG_MPC8349 */ + u32 core_clk; + u32 i2c1_clk; + u32 i2c2_clk; u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; u32 ddr_clk; u32 pci_clk; +#if defined(CONFIG_QE) + u32 qe_clk; + u32 brg_clk; + uint mp_alloc_base; + uint mp_alloc_top; +#endif /* CONFIG_QE */ +#if defined (CONFIG_MPC8360) + u32 ddr_sec_clk; +#endif /* CONFIG_MPC8360 */ #endif #if defined(CONFIG_MPC5xxx) unsigned long ipb_clk; diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h deleted file mode 100644 index 1680d3a..0000000 --- a/include/asm-ppc/i2c.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Freescale I2C Controller - * - * This software may be used and distributed according to the - * terms of the GNU Public License, Version 2, incorporated - * herein by reference. - * - * Copyright 2004 Freescale Semiconductor. - * (C) Copyright 2003, Motorola, Inc. - * author: Eran Liberty (liberty@freescale.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _ASM_I2C_H_ -#define _ASM_I2C_H_ - -#include <asm/types.h> - -typedef struct i2c -{ - u8 adr; /**< I2C slave address */ -#define I2C_ADR 0xFE -#define I2C_ADR_SHIFT 1 -#define I2C_ADR_RES ~(I2C_ADR) - u8 res0[3]; - u8 fdr; /**< I2C frequency divider register */ -#define IC2_FDR 0x3F -#define IC2_FDR_SHIFT 0 -#define IC2_FDR_RES ~(IC2_FDR) - u8 res1[3]; - u8 cr; /**< I2C control redister */ -#define I2C_CR_MEN 0x80 -#define I2C_CR_MIEN 0x40 -#define I2C_CR_MSTA 0x20 -#define I2C_CR_MTX 0x10 -#define I2C_CR_TXAK 0x08 -#define I2C_CR_RSTA 0x04 -#define I2C_CR_BCST 0x01 - u8 res2[3]; - u8 sr; /**< I2C status register */ -#define I2C_SR_MCF 0x80 -#define I2C_SR_MAAS 0x40 -#define I2C_SR_MBB 0x20 -#define I2C_SR_MAL 0x10 -#define I2C_SR_BCSTM 0x08 -#define I2C_SR_SRW 0x04 -#define I2C_SR_MIF 0x02 -#define I2C_SR_RXAK 0x01 - u8 res3[3]; - u8 dr; /**< I2C data register */ -#define I2C_DR 0xFF -#define I2C_DR_SHIFT 0 -#define I2C_DR_RES ~(I2C_DR) - u8 res4[3]; - u8 dfsrr; /**< I2C digital filter sampling rate register */ -#define I2C_DFSRR 0x3F -#define I2C_DFSRR_SHIFT 0 -#define I2C_DFSRR_RES ~(I2C_DR) - u8 res5[3]; - u8 res6[0xE8]; -} i2c_t; - -#ifndef CFG_HZ -#error CFG_HZ is not defined in /include/configs/${BOARD}.h -#endif -#define I2C_TIMEOUT (CFG_HZ/4) - -#ifndef CFG_IMMRBAR -#error CFG_IMMRBAR is not defined in /include/configs/${BOARD}.h -#endif - -#ifndef CFG_I2C_OFFSET -#error CFG_I2C_OFFSET is not defined in /include/configs/${BOARD}.h -#endif - -#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X) -/* - * MPC8349 have two i2c bus - */ -extern i2c_t * mpc8349_i2c; -#define I2C mpc8349_i2c -#else -#define I2C ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET)) -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#endif /* _ASM_I2C_H_ */ diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index c2b4c5c..2a76a05 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -1,75 +1,116 @@ /* - * MPC8349 Internal Memory Map - * Copyright (c) 2004 Freescale Semiconductor. - * Eran Liberty (liberty@freescale.com) + * (C) Copyright 2004-2006 Freescale Semiconductor, Inc. + * + * MPC83xx Internal Memory Map + * + * History : + * 20060601: Daveliu (daveliu@freescale.com) + * TanyaJiang (tanya.jiang@freescale.com) + * Unified variable names for mpc83xx + * 2005 : Mandy Lavi (mandy.lavi@freescale.com) + * support for mpc8360e + * 2004 : Eran Liberty (liberty@freescale.com) + * Initialized for mpc8349 + * based on: + * MPC8260 Internal Memory Map + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) + * MPC85xx Internal Memory Map + * Copyright(c) 2002,2003 Motorola Inc. + * Xianghua Xiao (x.xiao@motorola.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA * - * based on: - * - MPC8260 Internal Memory Map - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) - * - MPC85xx Internal Memory Map - * Copyright(c) 2002,2003 Motorola Inc. - * Xianghua Xiao (x.xiao@motorola.com) */ -#ifndef __IMMAP_8349__ -#define __IMMAP_8349__ +#ifndef __IMMAP_83xx__ +#define __IMMAP_83xx__ +#include <config.h> #include <asm/types.h> -#include <asm/i2c.h> +#include <asm/fsl_i2c.h> /* * Local Access Window. */ -typedef struct law8349 { - u32 bar; /* LBIU local access window base address register */ +typedef struct law83xx { + u32 bar; /* LBIU local access window base address register */ /* Identifies the 20 most-significant address bits of the base of local * access window n. The specified base address should be aligned to the * window size, as defined by LBLAWARn[SIZE]. */ #define LAWBAR_BAR 0xFFFFF000 #define LAWBAR_RES ~(LAWBAR_BAR) - u32 ar; /* LBIU local access window attribute register */ -} law8349_t; + u32 ar; /* LBIU local access window attribute register */ +} law83xx_t; /* * System configuration registers. */ -typedef struct sysconf8349 { - u32 immrbar; /* Internal memory map base address register */ +typedef struct sysconf83xx { + u32 immrbar; /* Internal memory map base address register */ u8 res0[0x04]; - u32 altcbar; /* Alternate configuration base address register */ + u32 altcbar; /* Alternate configuration base address register */ /* Identifies the12 most significant address bits of an alternate base * address used for boot sequencer configuration accesses. */ #define ALTCBAR_BASE_ADDR 0xFFF00000 -#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */ +#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */ u8 res1[0x14]; - law8349_t lblaw[4]; /* LBIU local access window */ + law83xx_t lblaw[4]; /* LBIU local access window */ u8 res2[0x20]; - law8349_t pcilaw[2]; /* PCI local access window */ + law83xx_t pcilaw[2]; /* PCI local access window */ u8 res3[0x30]; - law8349_t ddrlaw[2]; /* DDR local access window */ + law83xx_t ddrlaw[2]; /* DDR local access window */ u8 res4[0x50]; - u32 sgprl; /* System General Purpose Register Low */ - u32 sgprh; /* System General Purpose Register High */ - u32 spridr; /* System Part and Revision ID Register */ -#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */ -#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */ + u32 sgprl; /* System General Purpose Register Low */ + u32 sgprh; /* System General Purpose Register High */ + u32 spridr; /* System Part and Revision ID Register */ +#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */ +#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */ u8 res5[0x04]; - u32 spcr; /* System Priority Configuration Register */ -#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */ -#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */ -#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */ -#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */ -#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */ -#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */ -#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */ -#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */ -#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */ -#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */ + u32 spcr; /* System Priority Configuration Register */ +#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */ +#define SPCR_PCIHPE_SHIFT (31-3) +#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */ +#define SPCR_PCIPR_SHIFT (31-7) +#define SPCR_OPT 0x00800000 /* Optimize */ +#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */ +#define SPCR_TBEN_SHIFT (31-9) +#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */ +#define SPCR_COREPR_SHIFT (31-11) +#if defined (CONFIG_MPC8349) +#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */ +#define SPCR_TSEC1DP_SHIFT (31-19) +#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */ +#define SPCR_TSEC1BDP_SHIFT (31-21) +#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */ +#define SPCR_TSEC1EP_SHIFT (31-23) +#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */ +#define SPCR_TSEC2DP_SHIFT (31-27) +#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */ +#define SPCR_TSEC2BDP_SHIFT (31-29) +#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */ +#define SPCR_TSEC2EP_SHIFT (31-31) #define SPCR_RES ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \ | SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \ | SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP) - u32 sicrl; /* System General Purpose Register Low */ +#elif defined (CONFIG_MPC8360) +#define SPCR_RES ~(SPCR_PCIHPE|SPCR_PCIPR|SPCR_OPT|SPCR_TBEN|SPCR_COREPR) +#endif + u32 sicrl; /* System General Purpose Register Low */ +#if defined (CONFIG_MPC8349) #define SICRL_LDP_A 0x80000000 #define SICRL_USB1 0x40000000 #define SICRL_USB0 0x20000000 @@ -91,8 +132,18 @@ typedef struct sysconf8349 { | SICRL_GPIO1_D | SICRL_GPIO1_E | SICRL_GPIO1_F \ | SICRL_GPIO1_G | SICRL_GPIO1_H | SICRL_GPIO1_I \ | SICRL_GPIO1_J | SICRL_GPIO1_K | SICRL_GPIO1_L ) - u32 sicrh; /* System General Purpose Register High */ +#elif defined (CONFIG_MPC8360) +#define SICRL_LDP_A 0xC0000000 +#define SICRL_LCLK_1 0x10000000 +#define SICRL_LCLK_2 0x08000000 +#define SICRL_SRCID_A 0x03000000 +#define SICRL_IRQ_CKSTP_A 0x00C00000 +#define SICRL_RES ~(SICRL_LDP_A | SICRL_LCLK_1 | SICRL_LCLK_2 | \ + SICRL_SRCID_A | SICRL_IRQ_CKSTP_A) +#endif + u32 sicrh; /* System General Purpose Register High */ #define SICRH_DDR 0x80000000 +#if defined (CONFIG_MPC8349) #define SICRH_TSEC1_A 0x10000000 #define SICRH_TSEC1_B 0x08000000 #define SICRH_TSEC1_C 0x04000000 @@ -117,7 +168,7 @@ typedef struct sysconf8349 { #define SICRH_GPIO2_H 0x00000060 #define SICRH_TSOBI1 0x00000002 #define SICRH_TSOBI2 0x00000001 -#define SICRh_RES ~( SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \ +#define SICRH_RES ~( SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \ | SICRH_TSEC1_C | SICRH_TSEC1_D | SICRH_TSEC1_E \ | SICRH_TSEC1_F | SICRH_TSEC2_A | SICRH_TSEC2_B \ | SICRH_TSEC2_C | SICRH_TSEC2_D | SICRH_TSEC2_E \ @@ -126,466 +177,758 @@ typedef struct sysconf8349 { | SICRH_GPIO2_D | SICRH_GPIO2_E | SICRH_GPIO2_F \ | SICRH_GPIO2_G | SICRH_GPIO2_H | SICRH_TSOBI1 \ | SICRH_TSOBI2) +#elif defined (CONFIG_MPC8360) +#define SICRH_SECONDARY_DDR 0x40000000 +#define SICRH_SDDROE 0x02000000 /* SDDRIOE bit from reset configuration word high. */ +#define SICRH_UC1EOBI 0x00000004 /* UCC1 Ethernet Output Buffer Impedance. */ +#define SICRH_UC2E1OBI 0x00000002 /* UCC2 Ethernet pin option 1 Output Buffer Impedance. */ +#define SICRH_UC2E2OBI 0x00000001 /* UCC2 Ethernet pin option 2 Output Buffer Impedance. */ +#define SICRH_RES ~(SICRH_DDR | SICRH_SECONDARY_DDR | SICRH_SDDROE | \ + SICRH_UC2E1OBI | SICRH_UC2E2OBI | SICRH_UC2E2OBI) +#endif u8 res6[0xE4]; -} sysconf8349_t; +} sysconf83xx_t; /* * Watch Dog Timer (WDT) Registers */ -typedef struct wdt8349 { +typedef struct wdt83xx { u8 res0[4]; - u32 swcrr; /* System watchdog control register */ - u32 swcnr; /* System watchdog count register */ + u32 swcrr; /* System watchdog control register */ + u32 swcnr; /* System watchdog count register */ #define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field. #define SWCNR_RES ~(SWCNR_SWCN) u8 res1[2]; - u16 swsrr; /* System watchdog service register */ + u16 swsrr; /* System watchdog service register */ +#define SWSRR_WS 0x0000FFFF /* Software Watchdog Service Field. */ u8 res2[0xF0]; -} wdt8349_t; +} wdt83xx_t; /* * RTC/PIT Module Registers */ -typedef struct rtclk8349 { - u32 cnr; /* control register */ -#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */ -#define CNR_CLIN 0x00000040 /* Input Clock Control Bit */ -#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */ -#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */ +typedef struct rtclk83xx { + u32 cnr; /* control register */ +#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */ +#define CNR_CLIN 0x00000040 /* Input Clock Control Bit */ +#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */ +#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */ #define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM) - u32 ldr; /* load register */ - u32 psr; /* prescale register */ - u32 ctr; /* register */ - u32 evr; /* event register */ -#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */ -#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */ -#define RTEVR_RES ~(EVR_SIF | EVR_AIF) - u32 alr; /* alarm register */ + u32 ldr; /* load register */ +#define LDR_CLDV 0xFFFFFFFF /* Contains the 32-bit value to be + * loaded in a 32-bit RTC counter.*/ + u32 psr; /* prescale register */ +#define PSR_PRSC 0xFFFFFFFF /* RTC Prescaler bits. */ + u32 ctr; /* Counter value field register */ +#define CRT_CNTV 0xFFFFFFFF /* RTC Counter value field. */ + u32 evr; /* event register */ +#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */ +#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */ +#define RTEVR_RES ~(RTEVR_SIF | RTEVR_AIF) +#define PTEVR_PIF 0x00000001 /* Periodic interrupt flag bit. */ +#define PTEVR_RES ~(PTEVR_PIF) + u32 alr; /* alarm register */ u8 res0[0xE8]; -} rtclk8349_t; +} rtclk83xx_t; /* * Global timper module */ -typedef struct gtm8349 { - u8 cfr1; /* Timer1/2 Configuration */ -#define CFR1_PCAS 0x80 /* Pair Cascade mode */ -#define CFR1_BCM 0x40 /* Backward compatible mode */ -#define CFR1_STP2 0x20 /* Stop timer */ -#define CFR1_RST2 0x10 /* Reset timer */ -#define CFR1_GM2 0x08 /* Gate mode for pin 2 */ -#define CFR1_GM1 0x04 /* Gate mode for pin 1 */ -#define CFR1_STP1 0x02 /* Stop timer */ -#define CFR1_RST1 0x01 /* Reset timer */ - u8 res0[3]; - u8 cfr2; /* Timer3/4 Configuration */ -#define CFR2_PCAS 0x80 /* Pair Cascade mode */ -#define CFR2_SCAS 0x40 /* Super Cascade mode */ -#define CFR2_STP4 0x20 /* Stop timer */ -#define CFR2_RST4 0x10 /* Reset timer */ -#define CFR2_GM4 0x08 /* Gate mode for pin 4 */ -#define CFR2_GM3 0x04 /* Gate mode for pin 3 */ -#define CFR2_STP3 0x02 /* Stop timer */ -#define CFR2_RST3 0x01 /* Reset timer */ - u8 res1[10]; - u16 mdr1; /* Timer1 Mode Register */ -#define MDR_SPS 0xff00 /* Secondary Prescaler value */ -#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */ -#define MDR_OM 0x0020 /* Output mode */ -#define MDR_ORI 0x0010 /* Output reference interrupt enable */ -#define MDR_FRR 0x0008 /* Free run/restart */ -#define MDR_ICLK 0x0006 /* Input clock source for the timer */ -#define MDR_GE 0x0001 /* Gate enable */ - u16 mdr2; /* Timer2 Mode Register */ - u16 rfr1; /* Timer1 Reference Register */ - u16 rfr2; /* Timer2 Reference Register */ - u16 cpr1; /* Timer1 Capture Register */ - u16 cpr2; /* Timer2 Capture Register */ - u16 cnr1; /* Timer1 Counter Register */ - u16 cnr2; /* Timer2 Counter Register */ - u16 mdr3; /* Timer3 Mode Register */ - u16 mdr4; /* Timer4 Mode Register */ - u16 rfr3; /* Timer3 Reference Register */ - u16 rfr4; /* Timer4 Reference Register */ - u16 cpr3; /* Timer3 Capture Register */ - u16 cpr4; /* Timer4 Capture Register */ - u16 cnr3; /* Timer3 Counter Register */ - u16 cnr4; /* Timer4 Counter Register */ - u16 evr1; /* Timer1 Event Register */ - u16 evr2; /* Timer2 Event Register */ - u16 evr3; /* Timer3 Event Register */ - u16 evr4; /* Timer4 Event Register */ -#define GTEVR_REF 0x0002 /* Output reference event */ -#define GTEVR_CAP 0x0001 /* Counter Capture event */ +typedef struct gtm83xx { + u8 cfr1; /* Timer1/2 Configuration */ +#define CFR1_PCAS 0x80 /* Pair Cascade mode */ +#define CFR1_BCM 0x40 /* Backward compatible mode */ +#define CFR1_STP2 0x20 /* Stop timer */ +#define CFR1_RST2 0x10 /* Reset timer */ +#define CFR1_GM2 0x08 /* Gate mode for pin 2 */ +#define CFR1_GM1 0x04 /* Gate mode for pin 1 */ +#define CFR1_STP1 0x02 /* Stop timer */ +#define CFR1_RST1 0x01 /* Reset timer */ +#define CFR1_RES ~(CFR1_PCAS | CFR1_STP2 | CFR1_RST2 | CFR1_GM2 |\ + CFR1_GM1 | CFR1_STP1 | CFR1_RST1) + u8 res0[3]; + u8 cfr2; /* Timer3/4 Configuration */ +#define CFR2_PCAS 0x80 /* Pair Cascade mode */ +#define CFR2_SCAS 0x40 /* Super Cascade mode */ +#define CFR2_STP4 0x20 /* Stop timer */ +#define CFR2_RST4 0x10 /* Reset timer */ +#define CFR2_GM4 0x08 /* Gate mode for pin 4 */ +#define CFR2_GM3 0x04 /* Gate mode for pin 3 */ +#define CFR2_STP3 0x02 /* Stop timer */ +#define CFR2_RST3 0x01 /* Reset timer */ + u8 res1[10]; + u16 mdr1; /* Timer1 Mode Register */ +#define MDR_SPS 0xff00 /* Secondary Prescaler value */ +#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */ +#define MDR_OM 0x0020 /* Output mode */ +#define MDR_ORI 0x0010 /* Output reference interrupt enable */ +#define MDR_FRR 0x0008 /* Free run/restart */ +#define MDR_ICLK 0x0006 /* Input clock source for the timer */ +#define MDR_GE 0x0001 /* Gate enable */ + u16 mdr2; /* Timer2 Mode Register */ + u16 rfr1; /* Timer1 Reference Register */ + u16 rfr2; /* Timer2 Reference Register */ + u16 cpr1; /* Timer1 Capture Register */ + u16 cpr2; /* Timer2 Capture Register */ + u16 cnr1; /* Timer1 Counter Register */ + u16 cnr2; /* Timer2 Counter Register */ + u16 mdr3; /* Timer3 Mode Register */ + u16 mdr4; /* Timer4 Mode Register */ + u16 rfr3; /* Timer3 Reference Register */ + u16 rfr4; /* Timer4 Reference Register */ + u16 cpr3; /* Timer3 Capture Register */ + u16 cpr4; /* Timer4 Capture Register */ + u16 cnr3; /* Timer3 Counter Register */ + u16 cnr4; /* Timer4 Counter Register */ + u16 evr1; /* Timer1 Event Register */ + u16 evr2; /* Timer2 Event Register */ + u16 evr3; /* Timer3 Event Register */ + u16 evr4; /* Timer4 Event Register */ +#define GTEVR_REF 0x0002 /* Output reference event */ +#define GTEVR_CAP 0x0001 /* Counter Capture event */ #define GTEVR_RES ~(EVR_CAP|EVR_REF) - u16 psr1; /* Timer1 Prescaler Register */ - u16 psr2; /* Timer2 Prescaler Register */ - u16 psr3; /* Timer3 Prescaler Register */ - u16 psr4; /* Timer4 Prescaler Register */ - u8 res[0xC0]; -} gtm8349_t; + u16 psr1; /* Timer1 Prescaler Register */ + u16 psr2; /* Timer2 Prescaler Register */ + u16 psr3; /* Timer3 Prescaler Register */ + u16 psr4; /* Timer4 Prescaler Register */ +#define GTPSR_PPS 0x00FF /* Primary Prescaler Bits. */ +#define GTPSR_RES ~(GTPSR_PPS) + u8 res[0xC0]; +} gtm83xx_t; /* * Integrated Programmable Interrupt Controller */ -typedef struct ipic8349 { - u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */ -#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */ -#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */ -#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */ -#define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */ -#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */ -#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */ +typedef struct ipic83xx { + u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */ +#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */ +#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */ +#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */ +#define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */ +#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */ +#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */ #define SICFR_RES ~(SICFR_HPI|SICFR_MPSB|SICFR_MPSA|SICFR_IPSD|SICFR_IPSA|SICFR_HPIT) - u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */ -#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */ -#define SICVR_IVEC 0x0000007f /* Interrupt vector */ + u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */ +#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */ +#define SICVR_IVEC 0x0000007f /* Interrupt vector */ #define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC) - u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */ -#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */ -#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */ -#define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */ -#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */ -#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */ -#define SIIH_TSEC2ER 0x04000000 /* TSEC2 Eror interrupt */ -#define SIIH_USB2DR 0x02000000 /* USB2 DR interrupt */ -#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */ -#define SIIH_UART1 0x00000080 /* UART1 interrupt */ -#define SIIH_UART2 0x00000040 /* UART2 interrupt */ -#define SIIH_SEC 0x00000020 /* SEC interrupt */ -#define SIIH_I2C1 0x00000004 /* I2C1 interrupt */ -#define SIIH_I2C2 0x00000002 /* I2C1 interrupt */ -#define SIIH_SPI 0x00000001 /* SPI interrupt */ + u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */ +#if defined (CONFIG_MPC8349) +#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */ +#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */ +#define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */ +#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */ +#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */ +#define SIIH_TSEC2ER 0x04000000 /* TSEC2 Eror interrupt */ +#define SIIH_USB2DR 0x02000000 /* USB2 DR interrupt */ +#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */ +#endif +#if defined (CONFIG_MPC8360) +#define SIIH_H_QE_H 0x80000000 /* QE high interrupt */ +#define SIIH_H_QE_L 0x40000000 /* QE low interrupt */ +#endif +#define SIIH_UART1 0x00000080 /* UART1 interrupt */ +#define SIIH_UART2 0x00000040 /* UART2 interrupt */ +#define SIIH_SEC 0x00000020 /* SEC interrupt */ +#define SIIH_I2C1 0x00000004 /* I2C1 interrupt */ +#define SIIH_I2C2 0x00000002 /* I2C2 interrupt */ +#if defined (CONFIG_MPC8349) +#define SIIH_SPI 0x00000001 /* SPI interrupt */ #define SIIH_RES ~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \ | SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \ | SIIH_USB2DR | SIIH_USB2MPH | SIIH_UART1 \ | SIIH_UART2 | SIIH_SEC | SIIH_I2C1 \ | SIIH_I2C2 | SIIH_SPI) - u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */ -#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */ -#define SIIL_PIT 0x40000000 /* PIT interrupt */ -#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */ -#define SIIL_PCI2 0x10000000 /* PCI2 interrupt */ -#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */ -#define SIIL_MU 0x04000000 /* Message Unit interrupt */ -#define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */ -#define SIIL_DMA 0x01000000 /* DMA interrupt */ -#define SIIL_GTM4 0x00800000 /* GTM4 interrupt */ -#define SIIL_GTM8 0x00400000 /* GTM8 interrupt */ -#define SIIL_GPIO1 0x00200000 /* GPIO1 interrupt */ -#define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */ -#define SIIL_DDR 0x00080000 /* DDR interrupt */ -#define SIIL_LBC 0x00040000 /* LBC interrupt */ -#define SIIL_GTM2 0x00020000 /* GTM2 interrupt */ -#define SIIL_GTM6 0x00010000 /* GTM6 interrupt */ -#define SIIL_PMC 0x00008000 /* PMC interrupt */ -#define SIIL_GTM3 0x00000800 /* GTM3 interrupt */ -#define SIIL_GTM7 0x00000400 /* GTM7 interrupt */ -#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */ -#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */ -#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */ +#endif +#if defined (CONFIG_MPC8360) +#define SIIH_RES ~(SIIH_H_QE_H | SIIH_H_QE_L | SIIH_H_UART1 | \ + SIIH_H_UART2| SIIH_H_SEC | SIIH_H_I2C1 |SIIH_H_I2C2) +#endif + u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */ +#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */ +#define SIIL_PIT 0x40000000 /* PIT interrupt */ +#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */ +#if defined (CONFIG_MPC8349) +#define SIIL_PCI2 0x10000000 /* PCI2 interrupt */ +#endif +#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */ +#define SIIL_MU 0x04000000 /* Message Unit interrupt */ +#define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */ +#define SIIL_DMA 0x01000000 /* DMA interrupt */ +#define SIIL_GTM4 0x00800000 /* GTM4 interrupt */ +#define SIIL_GTM8 0x00400000 /* GTM8 interrupt */ +#if defined (CONFIG_MPC8349) +#define SIIL_GPIO1 0x00200000 /* GPIO1 interrupt */ +#define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */ +#endif +#if defined (CONFIG_MPC8360) +#define SIIL_QEP 0x00200000 /* QE ports interrupt */ +#define SIIL_SDDR 0x00100000 /* SDDR interrupt */ +#endif +#define SIIL_DDR 0x00080000 /* DDR interrupt */ +#define SIIL_LBC 0x00040000 /* LBC interrupt */ +#define SIIL_GTM2 0x00020000 /* GTM2 interrupt */ +#define SIIL_GTM6 0x00010000 /* GTM6 interrupt */ +#define SIIL_PMC 0x00008000 /* PMC interrupt */ +#define SIIL_GTM3 0x00000800 /* GTM3 interrupt */ +#define SIIL_GTM7 0x00000400 /* GTM7 interrupt */ +#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */ +#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */ +#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */ +#if defined (CONFIG_MPC8349) #define SIIL_RES ~(SIIL_RTCS | SIIL_PIT | SIIL_PCI1 | SIIL_PCI2 \ | SIIL_RTCA | SIIL_MU | SIIL_SBA | SIIL_DMA \ | SIIL_GTM4 | SIIL_GTM8 | SIIL_GPIO1 | SIIL_GPIO2 \ | SIIL_DDR | SIIL_LBC | SIIL_GTM2 | SIIL_GTM6 \ | SIIL_PMC |SIIL_GTM3 | SIIL_GTM7 | SIIL_GTM1 \ | SIIL_GTM5 |SIIL_DPTC ) - u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */ - u8 res0[8]; - u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */ - u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */ - u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */ - u8 res1[4]; - u32 sepnr; /* System External Interrupt Pending Register (SEI) */ - u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */ - u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */ -#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */ -#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */ -#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */ -#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */ -#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */ -#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */ -#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */ -#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */ +#endif +#if defined (CONFIG_MPC8360) +#define SIIL_RES ~(SIIL_RTCS |SIIL_PIT |SIIL_PCI1 |SIIL_RTCALR \ + |SIIL_MU |SIIL_SBA |SIIL_DMA |SIIL_GTM4 |SIIL_GTM8 \ + |SIIL_QEP | SIIL_SDDR| SIIL_DDR |SIIL_LBC |SIIL_GTM2 \ + |SIIL_GTM6 |SIIL_PMC |SIIL_GTM3 |SIIL_GTM7 |SIIL_GTM1 \ + |SIIL_GTM5 ) +#endif + u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */ + u8 res0[8]; + u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */ + u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */ + u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */ + u8 res1[4]; + u32 sepnr; /* System External Interrupt Pending Register (SEI) */ + u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */ + u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */ +#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */ +#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */ +#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */ +#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */ +#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */ +#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */ +#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */ +#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */ #define PRR_RES ~(PRR_0|PRR_1|PRR_2|PRR_3|PRR_4|PRR_5|PRR_6|PRR_7) - u32 semsr; /* System External Interrupt Mask Register (SEI) */ -#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */ -#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */ -#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */ -#define SEI_IRQ3 0x10000000 /* IRQ3 external interrupt */ -#define SEI_IRQ4 0x08000000 /* IRQ4 external interrupt */ -#define SEI_IRQ5 0x04000000 /* IRQ5 external interrupt */ -#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */ -#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */ -#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */ + u32 semsr; /* System External Interrupt Mask Register (SEI) */ +#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */ +#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */ +#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */ +#define SEI_IRQ3 0x10000000 /* IRQ3 external interrupt */ +#define SEI_IRQ4 0x08000000 /* IRQ4 external interrupt */ +#define SEI_IRQ5 0x04000000 /* IRQ5 external interrupt */ +#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */ +#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */ +#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */ #define SEI_RES ~( SEI_IRQ0 | SEI_IRQ1 | SEI_IRQ2 | SEI_IRQ3 \ | SEI_IRQ4 | SEI_IRQ5 | SEI_IRQ6 | SEI_IRQ7 \ | SEI_SIRQ0) - u32 secnr; /* System External Interrupt Control Register (SECNR) */ -#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */ -#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */ -#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */ -#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */ -#define SECNR_EDI0 0x00008000 /* IRQ0 external interrupt edge/level detect */ -#define SECNR_EDI1 0x00004000 /* IRQ1 external interrupt edge/level detect */ -#define SECNR_EDI2 0x00002000 /* IRQ2 external interrupt edge/level detect */ -#define SECNR_EDI3 0x00001000 /* IRQ3 external interrupt edge/level detect */ -#define SECNR_EDI4 0x00000800 /* IRQ4 external interrupt edge/level detect */ -#define SECNR_EDI5 0x00000400 /* IRQ5 external interrupt edge/level detect */ -#define SECNR_EDI6 0x00000200 /* IRQ6 external interrupt edge/level detect */ -#define SECNR_EDI7 0x00000100 /* IRQ7 external interrupt edge/level detect */ + u32 secnr; /* System External Interrupt Control Register (SECNR) */ +#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */ +#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */ +#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */ +#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */ +#define SECNR_EDI0 0x00008000 /* IRQ0 external interrupt edge/level detect */ +#define SECNR_EDI1 0x00004000 /* IRQ1 external interrupt edge/level detect */ +#define SECNR_EDI2 0x00002000 /* IRQ2 external interrupt edge/level detect */ +#define SECNR_EDI3 0x00001000 /* IRQ3 external interrupt edge/level detect */ +#define SECNR_EDI4 0x00000800 /* IRQ4 external interrupt edge/level detect */ +#define SECNR_EDI5 0x00000400 /* IRQ5 external interrupt edge/level detect */ +#define SECNR_EDI6 0x00000200 /* IRQ6 external interrupt edge/level detect */ +#define SECNR_EDI7 0x00000100 /* IRQ7 external interrupt edge/level detect */ #define SECNR_RES ~( SECNR_MIXB0T | SECNR_MIXB1T | SECNR_MIXA0T \ | SECNR_SYSA1T | SECNR_EDI0 | SECNR_EDI1 \ | SECNR_EDI2 | SECNR_EDI3 | SECNR_EDI4 \ | SECNR_EDI5 | SECNR_EDI6 | SECNR_EDI7) - u32 sersr; /* System Error Status Register (SERR) */ - u32 sermr; /* System Error Mask Register (SERR) */ -#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */ -#define SERR_WDT 0x40000000 /* WDT MCP request */ -#define SERR_SBA 0x20000000 /* SBA MCP request */ -#define SERR_DDR 0x10000000 /* DDR MCP request */ -#define SERR_LBC 0x08000000 /* LBC MCP request */ -#define SERR_PCI1 0x04000000 /* PCI1 MCP request */ -#define SERR_PCI2 0x02000000 /* PCI2 MCP request */ -#define SERR_MU 0x01000000 /* MU MCP request */ -#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */ + u32 sersr; /* System Error Status Register (SERR) */ + u32 sermr; /* System Error Mask Register (SERR) */ +#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */ +#define SERR_WDT 0x40000000 /* WDT MCP request */ +#define SERR_SBA 0x20000000 /* SBA MCP request */ +#if defined (CONFIG_MPC8349) +#define SERR_DDR 0x10000000 /* DDR MCP request */ +#define SERR_LBC 0x08000000 /* LBC MCP request */ +#define SERR_PCI1 0x04000000 /* PCI1 MCP request */ +#define SERR_PCI2 0x02000000 /* PCI2 MCP request */ +#endif +#if defined (CONFIG_MPC8360) +#define SERR_CIEE 0x10000000 /* CIEE MCP request */ +#define SERR_CMEE 0x08000000 /* CMEEMCP request */ +#define SERR_PCI 0x04000000 /* PCI MCP request */ +#endif +#define SERR_MU 0x01000000 /* MU MCP request */ +#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */ +#if defined (CONFIG_MPC8349) #define SERR_RES ~( SERR_IRQ0 | SERR_WDT | SERR_SBA | SERR_DDR \ |SERR_LBC | SERR_PCI1 | SERR_PCI2 | SERR_MU \ |SERR_RNC ) - u32 sercr; /* System Error Control Register (SERCR) */ -#define SERCR_MCPR 0x00000001 /* MCP Route */ +#elif defined (CONFIG_MPC8360) +#define SERR_RES ~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_CIEE\ + |SERR_CMEE|SERR_PCI|SERR_MU) +#endif + u32 sercr; /* System Error Control Register (SERCR) */ +#define SERCR_MCPR 0x00000001 /* MCP Route */ #define SERCR_RES ~(SERCR_MCPR) - u8 res2[4]; - u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */ - u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */ - u32 sefcr; /* System External Interrupt Force Register (SEI) */ - u32 serfr; /* System Error Force Register (SERR) */ - u8 res3[0xA0]; -} ipic8349_t; + u8 res2[4]; + u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */ + u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */ + u32 sefcr; /* System External Interrupt Force Register (SEI) */ + u32 serfr; /* System Error Force Register (SERR) */ + u32 scvcr; /* System Critical Interrupt Vector Register */ +#define SCVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible + critical interrupt vector. */ +#define SCVCR_CVEC 0x0000007F /* Critical interrupt vector */ +#define SCVCR_RES ~(SCVCR_CVECX|SCVCR_CVEC) + u32 smvcr; /* System Management Interrupt Vector Register */ +#define SMVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible + critical interrupt vector. */ +#define SMVCR_CVEC 0x0000007F /* Critical interrupt vector */ +#define SMVCR_RES ~(SMVCR_CVECX|SMVCR_CVEC) + u8 res3[0x98]; +} ipic83xx_t; /* * System Arbiter Registers */ -typedef struct arbiter8349 { - u32 acr; /* Arbiter Configuration Register */ -#define ACR_COREDIS 0x10000000 /* Core disable. */ -#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */ -#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */ -#define ACR_RPTCNT 0x00000700 /* Repeat count. */ -#define ACR_APARK 0x00000030 /* Address parking. */ -#define ACR_PARKM 0x0000000F /* Parking master. */ +typedef struct arbiter83xx { + u32 acr; /* Arbiter Configuration Register */ +#define ACR_COREDIS 0x10000000 /* Core disable. */ +#define ACR_COREDIS_SHIFT (31-7) +#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */ +#define ACR_PIPE_DEP_SHIFT (31-15) +#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */ +#define ACR_PCI_RPTCNT_SHIFT (31-19) +#define ACR_RPTCNT 0x00000700 /* Repeat count. */ +#define ACR_RPTCNT_SHIFT (31-23) +#define ACR_APARK 0x00000030 /* Address parking. */ +#define ACR_APARK_SHIFT (31-27) +#define ACR_PARKM 0x0000000F /* Parking master. */ +#define ACR_PARKM_SHIFT (31-31) #define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM) - u32 atr; /* Arbiter Timers Register */ -#define ATR_DTO 0x00FF0000 /* Data time out. */ -#define ATR_ATO 0x000000FF /* Address time out. */ + u32 atr; /* Arbiter Timers Register */ +#define ATR_DTO 0x00FF0000 /* Data time out. */ +#define ATR_ATO 0x000000FF /* Address time out. */ #define ATR_RES ~(ATR_DTO|ATR_ATO) u8 res[4]; - u32 aer; /* Arbiter Event Register (AE)*/ - u32 aidr; /* Arbiter Interrupt Definition Register (AE) */ - u32 amr; /* Arbiter Mask Register (AE) */ - u32 aeatr; /* Arbiter Event Attributes Register */ -#define AEATR_EVENT 0x07000000 /* Event type. */ -#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */ -#define AEATR_TBST 0x00000800 /* Transfer burst. */ -#define AEATR_TSIZE 0x00000700 /* Transfer Size. */ -#define AEATR_TTYPE 0x0000001F /* Transfer Type. */ + u32 aer; /* Arbiter Event Register (AE) */ + u32 aidr; /* Arbiter Interrupt Definition Register (AE) */ + u32 amr; /* Arbiter Mask Register (AE) */ + u32 aeatr; /* Arbiter Event Attributes Register */ +#define AEATR_EVENT 0x07000000 /* Event type. */ +#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */ +#define AEATR_TBST 0x00000800 /* Transfer burst. */ +#define AEATR_TSIZE 0x00000700 /* Transfer Size. */ +#define AEATR_TTYPE 0x0000001F /* Transfer Type. */ #define AEATR_RES ~(AEATR_EVENT|AEATR_MSTR_ID|AEATR_TBST|AEATR_TSIZE|AEATR_TTYPE) - u32 aeadr; /* Arbiter Event Address Register */ - u32 aerr; /* Arbiter Event Response Register (AE)*/ -#define AE_ETEA 0x00000020 /* Transfer error. */ -#define AE_RES_ 0x00000010 /* Reserved transfer type. */ -#define AE_ECW 0x00000008 /* External control word transfer type. */ -#define AE_AO 0x00000004 /* Address Only transfer type. */ -#define AE_DTO 0x00000002 /* Data time out. */ -#define AE_ATO 0x00000001 /* Address time out. */ + u32 aeadr; /* Arbiter Event Address Register */ + u32 aerr; /* Arbiter Event Response Register (AE) */ +#define AE_ETEA 0x00000020 /* Transfer error. */ +#define AE_RES_ 0x00000010 /* Reserved transfer type. */ +#define AE_ECW 0x00000008 /* External control word transfer type. */ +#define AE_AO 0x00000004 /* Address Only transfer type. */ +#define AE_DTO 0x00000002 /* Data time out. */ +#define AE_ATO 0x00000001 /* Address time out. */ #define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO) u8 res1[0xDC]; -} arbiter8349_t; +} arbiter83xx_t; /* * Reset Module */ -typedef struct reset8349 { - u32 rcwl; /* RCWL Register */ -#define RCWL_LBIUCM 0x80000000 /* LBIUCM */ +typedef struct reset83xx { + u32 rcwl; /* RCWL Register */ +#define RCWL_LBIUCM 0x80000000 /* LBIUCM */ #define RCWL_LBIUCM_SHIFT 31 -#define RCWL_DDRCM 0x40000000 /* DDRCM */ +#define RCWL_DDRCM 0x40000000 /* DDRCM */ #define RCWL_DDRCM_SHIFT 30 -#define RCWL_SVCOD 0x30000000 /* SVCOD */ -#define RCWL_SPMF 0x0f000000 /* SPMF */ +#if defined (CONFIG_MPC8349) +#define RCWL_SVCOD 0x30000000 /* SVCOD */ +#endif +#define RCWL_SPMF 0x0f000000 /* SPMF */ #define RCWL_SPMF_SHIFT 24 -#define RCWL_COREPLL 0x007F0000 /* COREPLL */ +#define RCWL_COREPLL 0x007F0000 /* COREPLL */ #define RCWL_COREPLL_SHIFT 16 -#define RCWL_CEVCOD 0x000000C0 /* CEVCOD */ -#define RCWL_CEPDF 0x00000020 /* CEPDF */ -#define RCWL_CEPMF 0x0000001F /* CEPMF */ -#define RCWL_RES ~(RCWL_BIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF) - u32 rcwh; /* RCHL Register */ -#define RCWH_PCIHOST 0x80000000 /* PCIHOST */ +#define RCWL_CEVCOD 0x000000C0 /* CEVCOD */ +#define RCWL_CEPDF 0x00000020 /* CEPDF */ +#define RCWL_CEPDF_SHIFT 5 +#define RCWL_CEPMF 0x0000001F /* CEPMF */ +#define RCWL_CEPMF_SHIFT 0 +#if defined (CONFIG_MPC8349) +#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF) +#elif defined (CONFIG_MPC8360) +#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SPMF|RCWL_COREPLL|RCWL_CEPDF|RCWL_CEPMF) +#endif + u32 rcwh; /* RCHL Register */ +#define RCWH_PCIHOST 0x80000000 /* PCIHOST */ #define RCWH_PCIHOST_SHIFT 31 -#define RCWH_PCI64 0x40000000 /* PCI64 */ -#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB */ -#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB */ -#define RCWH_COREDIS 0x08000000 /* COREDIS */ -#define RCWH_BMS 0x04000000 /* BMS */ -#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ */ -#define RCWH_SWEN 0x00800000 /* SWEN */ -#define RCWH_ROMLOC 0x00700000 /* ROMLOC */ -#define RCWH_TSEC1M 0x0000c000 /* TSEC1M */ -#define RCWH_TSEC2M 0x00003000 /* TSEC2M */ -#define RCWH_TPR 0x00000100 /* TPR */ -#define RCWH_TLE 0x00000008 /* TLE */ -#define RCWH_LALE 0x00000004 /* LALE */ +#if defined (CONFIG_MPC8349) +#define RCWH_PCI64 0x40000000 /* PCI64 */ +#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB */ +#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB */ +#elif defined (CONFIG_MPC8360) +#define RCWH_PCIARB 0x20000000 /* PCI internal arbiter mode. */ +#define RCWH_PCICKDRV 0x10000000 /* PCI clock output drive. */ +#endif +#define RCWH_COREDIS 0x08000000 /* COREDIS */ +#define RCWH_BMS 0x04000000 /* BMS */ +#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ */ +#define RCWH_SWEN 0x00800000 /* SWEN */ +#define RCWH_ROMLOC 0x00700000 /* ROMLOC */ +#if defined (CONFIG_MPC8349) +#define RCWH_TSEC1M 0x0000c000 /* TSEC1M */ +#define RCWH_TSEC2M 0x00003000 /* TSEC2M */ +#define RCWH_TPR 0x00000100 /* TPR */ +#elif defined (CONFIG_MPC8360) +#define RCWH_SDDRIOE 0x00000010 /* Secondary DDR IO Enable. */ +#endif +#define RCWH_TLE 0x00000008 /* TLE */ +#define RCWH_LALE 0x00000004 /* LALE */ +#if defined (CONFIG_MPC8349) #define RCWH_RES ~(RCWH_PCIHOST | RCWH_PCI64 | RCWH_PCI1ARB \ | RCWH_PCI2ARB | RCWH_COREDIS | RCWH_BMS \ | RCWH_BOOTSEQ | RCWH_SWEN | RCWH_ROMLOC \ | RCWH_TSEC1M | RCWH_TSEC2M | RCWH_TPR \ | RCWH_TLE | RCWH_LALE) - u8 res0[8]; - u32 rsr; /* Reset status Register */ -#define RSR_RSTSRC 0xE0000000 /* Reset source */ +#elif defined (CONFIG_MPC8360) +#define RCWH_RES ~(RCWH_PCIHOST|RCWH_PCIARB|RCWH_PCICKDRV \ + |RCWH_COREDIS|RCWH_BMS|RCWH_BOOTSEQ|RCWH_SWEN \ + |RCWH_SDDRIOE |RCWH_TLE) +#endif + u8 res0[8]; + u32 rsr; /* Reset status Register */ +#define RSR_RSTSRC 0xE0000000 /* Reset source */ #define RSR_RSTSRC_SHIFT 29 -#define RSR_BSF 0x00010000 /* Boot seq. fail */ +#define RSR_BSF 0x00010000 /* Boot seq. fail */ #define RSR_BSF_SHIFT 16 -#define RSR_SWSR 0x00002000 /* software soft reset */ +#define RSR_SWSR 0x00002000 /* software soft reset */ #define RSR_SWSR_SHIFT 13 -#define RSR_SWHR 0x00001000 /* software hard reset */ +#define RSR_SWHR 0x00001000 /* software hard reset */ #define RSR_SWHR_SHIFT 12 -#define RSR_JHRS 0x00000200 /* jtag hreset */ +#define RSR_JHRS 0x00000200 /* jtag hreset */ #define RSR_JHRS_SHIFT 9 -#define RSR_JSRS 0x00000100 /* jtag sreset status */ +#define RSR_JSRS 0x00000100 /* jtag sreset status */ #define RSR_JSRS_SHIFT 8 -#define RSR_CSHR 0x00000010 /* checkstop reset status */ +#define RSR_CSHR 0x00000010 /* checkstop reset status */ #define RSR_CSHR_SHIFT 4 -#define RSR_SWRS 0x00000008 /* software watchdog reset status */ +#define RSR_SWRS 0x00000008 /* software watchdog reset status */ #define RSR_SWRS_SHIFT 3 -#define RSR_BMRS 0x00000004 /* bus monitop reset status */ +#define RSR_BMRS 0x00000004 /* bus monitop reset status */ #define RSR_BMRS_SHIFT 2 -#define RSR_SRS 0x00000002 /* soft reset status */ +#define RSR_SRS 0x00000002 /* soft reset status */ #define RSR_SRS_SHIFT 1 -#define RSR_HRS 0x00000001 /* hard reset status */ +#define RSR_HRS 0x00000001 /* hard reset status */ #define RSR_HRS_SHIFT 0 #define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR | RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS | RSR_BMRS | RSR_SRS | RSR_HRS) - u32 rmr; /* Reset mode Register */ -#define RMR_CSRE 0x00000001 /* checkstop reset enable */ + u32 rmr; /* Reset mode Register */ +#define RMR_CSRE 0x00000001 /* checkstop reset enable */ #define RMR_CSRE_SHIFT 0 #define RMR_RES ~(RMR_CSRE) - u32 rpr; /* Reset protection Register */ - u32 rcr; /* Reset Control Register */ -#define RCR_SWHR 0x00000002 /* software hard reset */ -#define RCR_SWSR 0x00000001 /* software soft reset */ + u32 rpr; /* Reset protection Register */ + u32 rcr; /* Reset Control Register */ +#define RCR_SWHR 0x00000002 /* software hard reset */ +#define RCR_SWSR 0x00000001 /* software soft reset */ #define RCR_RES ~(RCR_SWHR | RCR_SWSR) - u32 rcer; /* Reset Control Enable Register */ -#define RCER_CRE 0x00000001 /* software hard reset */ + u32 rcer; /* Reset Control Enable Register */ +#define RCER_CRE 0x00000001 /* software hard reset */ #define RCER_RES ~(RCER_CRE) - u8 res1[0xDC]; -} reset8349_t; - -typedef struct clk8349 { - u32 spmr; /* system PLL mode Register */ -#define SPMR_LBIUCM 0x80000000 /* LBIUCM */ -#define SPMR_DDRCM 0x40000000 /* DDRCM */ -#define SPMR_SVCOD 0x30000000 /* SVCOD */ -#define SPMR_SPMF 0x0F000000 /* SPMF */ -#define SPMR_CKID 0x00800000 /* CKID */ + u8 res1[0xDC]; +} reset83xx_t; + +typedef struct clk83xx { + u32 spmr; /* system PLL mode Register */ +#define SPMR_LBIUCM 0x80000000 /* LBIUCM */ +#define SPMR_DDRCM 0x40000000 /* DDRCM */ +#if defined (CONFIG_MPC8349) +#define SPMR_SVCOD 0x30000000 /* SVCOD */ +#endif +#define SPMR_SPMF 0x0F000000 /* SPMF */ +#define SPMR_CKID 0x00800000 /* CKID */ #define SPMR_CKID_SHIFT 23 -#define SPMR_COREPLL 0x007F0000 /* COREPLL */ -#define SPMR_CEVCOD 0x000000C0 /* CEVCOD */ -#define SPMR_CEPDF 0x00000020 /* CEPDF */ -#define SPMR_CEPMF 0x0000001F /* CEPMF */ +#define SPMR_COREPLL 0x007F0000 /* COREPLL */ +#define SPMR_CEVCOD 0x000000C0 /* CEVCOD */ +#define SPMR_CEPDF 0x00000020 /* CEPDF */ +#define SPMR_CEPMF 0x0000001F /* CEPMF */ +#if defined (CONFIG_MPC8349) #define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SVCOD \ | SPMR_SPMF | SPMR_CKID | SPMR_COREPLL \ | SPMR_CEVCOD | SPMR_CEPDF | SPMR_CEPMF) - u32 occr; /* output clock control Register */ -#define OCCR_PCICOE0 0x80000000 /* PCICOE0 */ -#define OCCR_PCICOE1 0x40000000 /* PCICOE1 */ -#define OCCR_PCICOE2 0x20000000 /* PCICOE2 */ -#define OCCR_PCICOE3 0x10000000 /* PCICOE3 */ -#define OCCR_PCICOE4 0x08000000 /* PCICOE4 */ -#define OCCR_PCICOE5 0x04000000 /* PCICOE5 */ -#define OCCR_PCICOE6 0x02000000 /* PCICOE6 */ -#define OCCR_PCICOE7 0x01000000 /* PCICOE7 */ -#define OCCR_PCICD0 0x00800000 /* PCICD0 */ -#define OCCR_PCICD1 0x00400000 /* PCICD1 */ -#define OCCR_PCICD2 0x00200000 /* PCICD2 */ -#define OCCR_PCICD3 0x00100000 /* PCICD3 */ -#define OCCR_PCICD4 0x00080000 /* PCICD4 */ -#define OCCR_PCICD5 0x00040000 /* PCICD5 */ -#define OCCR_PCICD6 0x00020000 /* PCICD6 */ -#define OCCR_PCICD7 0x00010000 /* PCICD7 */ -#define OCCR_PCI1CR 0x00000002 /* PCI1CR */ -#define OCCR_PCI2CR 0x00000001 /* PCI2CR */ +#elif defined (CONFIG_MPC8360) +#define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SPMF \ + | SPMR_CKID | SPMR_COREPLL | SPMR_CEVCOD \ + | SPMR_CEPDF | SPMR_CEPMF) +#endif + u32 occr; /* output clock control Register */ +#define OCCR_PCICOE0 0x80000000 /* PCICOE0 */ +#define OCCR_PCICOE1 0x40000000 /* PCICOE1 */ +#define OCCR_PCICOE2 0x20000000 /* PCICOE2 */ +#if defined (CONFIG_MPC8349) +#define OCCR_PCICOE3 0x10000000 /* PCICOE3 */ +#define OCCR_PCICOE4 0x08000000 /* PCICOE4 */ +#define OCCR_PCICOE5 0x04000000 /* PCICOE5 */ +#define OCCR_PCICOE6 0x02000000 /* PCICOE6 */ +#define OCCR_PCICOE7 0x01000000 /* PCICOE7 */ +#endif +#define OCCR_PCICD0 0x00800000 /* PCICD0 */ +#define OCCR_PCICD1 0x00400000 /* PCICD1 */ +#define OCCR_PCICD2 0x00200000 /* PCICD2 */ +#if defined (CONFIG_MPC8349) +#define OCCR_PCICD3 0x00100000 /* PCICD3 */ +#define OCCR_PCICD4 0x00080000 /* PCICD4 */ +#define OCCR_PCICD5 0x00040000 /* PCICD5 */ +#define OCCR_PCICD6 0x00020000 /* PCICD6 */ +#define OCCR_PCICD7 0x00010000 /* PCICD7 */ +#define OCCR_PCI1CR 0x00000002 /* PCI1CR */ +#define OCCR_PCI2CR 0x00000001 /* PCI2CR */ #define OCCR_RES ~(OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 \ | OCCR_PCICOE3 | OCCR_PCICOE4 | OCCR_PCICOE5 \ | OCCR_PCICOE6 | OCCR_PCICOE7 | OCCR_PCICD0 \ | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICD3 \ | OCCR_PCICD4 | OCCR_PCICD5 | OCCR_PCICD6 \ | OCCR_PCICD7 | OCCR_PCI1CR | OCCR_PCI2CR ) - u32 sccr; /* system clock control Register */ -#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */ +#endif +#if defined (CONFIG_MPC8360) +#define OCCR_PCICR 0x00000002 /* PCI clock rate */ +#define OCCR_RES ~(OCCR_PCICOE0|OCCR_PCICOE1|OCCR_PCICOE2 \ + |OCCR_PCICD0|OCCR_PCICD1|OCCR_PCICD2|OCCR_PCICR ) +#endif + u32 sccr; /* system clock control Register */ +#if defined (CONFIG_MPC8349) +#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */ #define SCCR_TSEC1CM_SHIFT 30 -#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */ +#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */ #define SCCR_TSEC2CM_SHIFT 28 -#define SCCR_ENCCM 0x03000000 /* ENCCM */ +#endif +#define SCCR_ENCCM 0x03000000 /* ENCCM */ #define SCCR_ENCCM_SHIFT 24 -#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM */ +#if defined (CONFIG_MPC8349) +#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM */ #define SCCR_USBMPHCM_SHIFT 22 -#define SCCR_USBDRCM 0x00300000 /* USBDRCM */ +#define SCCR_USBDRCM 0x00300000 /* USBDRCM */ #define SCCR_USBDRCM_SHIFT 20 -#define SCCR_PCICM 0x00010000 /* PCICM */ +#endif +#define SCCR_PCICM 0x00010000 /* PCICM */ +#if defined (CONFIG_MPC8349) #define SCCR_RES ~( SCCR_TSEC1CM | SCCR_TSEC2CM | SCCR_ENCCM \ | SCCR_USBMPHCM | SCCR_USBDRCM | SCCR_PCICM) - u8 res0[0xF4]; -} clk8349_t; +#endif +#if defined (CONFIG_MPC8360) +#define SCCR_RES ~(SCCR_ENCCM | SCCR_PCICM) +#endif + u8 res0[0xF4]; +} clk83xx_t; /* * Power Management Control Module */ -typedef struct pmc8349 { - u32 pmccr; /* PMC Configuration Register */ -#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */ -#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */ -#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN) - u32 pmcer; /* PMC Event Register */ -#define PMCER_PMCI 0x00000001 /* PMC Interrupt */ +typedef struct pmc83xx { + u32 pmccr; /* PMC Configuration Register */ +#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */ +#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */ +#if defined (CONFIG_MPC8360) +#define PMCCR_SDLPEN 0x00000004 /* Secondary DDR SDRAM Low Power Enable */ +#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN | PMCCR_SDLPEN) +#elif defined (CONFIG_MPC8349) +#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN) +#endif + u32 pmcer; /* PMC Event Register */ +#define PMCER_PMCI 0x00000001 /* PMC Interrupt */ #define PMCER_RES ~(PMCER_PMCI) - u32 pmcmr; /* PMC Mask Register */ -#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */ + u32 pmcmr; /* PMC Mask Register */ +#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */ #define PMCMR_RES ~(PMCMR_PMCIE) u8 res0[0xF4]; -} pmc8349_t; - +} pmc83xx_t; +#if defined (CONFIG_MPC8349) /* * general purpose I/O module */ -typedef struct gpio8349 { - u32 dir; /* direction register */ - u32 odr; /* open drain register */ - u32 dat; /* data register */ - u32 ier; /* interrupt event register */ - u32 imr; /* interrupt mask register */ - u32 icr; /* external interrupt control register */ +typedef struct gpio83xx { + u32 dir; /* direction register */ + u32 odr; /* open drain register */ + u32 dat; /* data register */ + u32 ier; /* interrupt event register */ + u32 imr; /* interrupt mask register */ + u32 icr; /* external interrupt control register */ u8 res0[0xE8]; -} gpio8349_t; +} gpio83xx_t; +#endif + +#if defined (CONFIG_MPC8360) +/* + * QE Ports Interrupts Registers + */ +typedef struct qepi83xx { + u8 res0[0xC]; + u32 qepier; /* QE Ports Interrupt Event Register */ +#define QEPIER_PA15 0x80000000 +#define QEPIER_PA16 0x40000000 +#define QEPIER_PA29 0x20000000 +#define QEPIER_PA30 0x10000000 +#define QEPIER_PB3 0x08000000 +#define QEPIER_PB5 0x04000000 +#define QEPIER_PB12 0x02000000 +#define QEPIER_PB13 0x01000000 +#define QEPIER_PB26 0x00800000 +#define QEPIER_PB27 0x00400000 +#define QEPIER_PC27 0x00200000 +#define QEPIER_PC28 0x00100000 +#define QEPIER_PC29 0x00080000 +#define QEPIER_PD12 0x00040000 +#define QEPIER_PD13 0x00020000 +#define QEPIER_PD16 0x00010000 +#define QEPIER_PD17 0x00008000 +#define QEPIER_PD26 0x00004000 +#define QEPIER_PD27 0x00002000 +#define QEPIER_PE12 0x00001000 +#define QEPIER_PE13 0x00000800 +#define QEPIER_PE24 0x00000400 +#define QEPIER_PE25 0x00000200 +#define QEPIER_PE26 0x00000100 +#define QEPIER_PE27 0x00000080 +#define QEPIER_PE31 0x00000040 +#define QEPIER_PF20 0x00000020 +#define QEPIER_PG31 0x00000010 +#define QEPIER_RES ~(QEPIER_PA15|QEPIER_PA16|QEPIER_PA29|QEPIER_PA30|QEPIER_PB3 \ + |QEPIER_PB5|QEPIER_PB12|QEPIER_PB13|QEPIER_PB26|QEPIER_PB27 \ + |QEPIER_PC27|QEPIER_PC28|QEPIER_PC29|QEPIER_PD12|QEPIER_PD13 \ + |QEPIER_PD16|QEPIER_PD17|QEPIER_PD26|QEPIER_PD27|QEPIER_PE12 \ + |QEPIER_PE13|QEPIER_PE24|QEPIER_PE25|QEPIER_PE26|QEPIER_PE27 \ + |QEPIER_PE31|QEPIER_PF20|QEPIER_PG31) + u32 qepimr; /* QE Ports Interrupt Mask Register */ +#define QEPIMR_PA15 0x80000000 +#define QEPIMR_PA16 0x40000000 +#define QEPIMR_PA29 0x20000000 +#define QEPIMR_PA30 0x10000000 +#define QEPIMR_PB3 0x08000000 +#define QEPIMR_PB5 0x04000000 +#define QEPIMR_PB12 0x02000000 +#define QEPIMR_PB13 0x01000000 +#define QEPIMR_PB26 0x00800000 +#define QEPIMR_PB27 0x00400000 +#define QEPIMR_PC27 0x00200000 +#define QEPIMR_PC28 0x00100000 +#define QEPIMR_PC29 0x00080000 +#define QEPIMR_PD12 0x00040000 +#define QEPIMR_PD13 0x00020000 +#define QEPIMR_PD16 0x00010000 +#define QEPIMR_PD17 0x00008000 +#define QEPIMR_PD26 0x00004000 +#define QEPIMR_PD27 0x00002000 +#define QEPIMR_PE12 0x00001000 +#define QEPIMR_PE13 0x00000800 +#define QEPIMR_PE24 0x00000400 +#define QEPIMR_PE25 0x00000200 +#define QEPIMR_PE26 0x00000100 +#define QEPIMR_PE27 0x00000080 +#define QEPIMR_PE31 0x00000040 +#define QEPIMR_PF20 0x00000020 +#define QEPIMR_PG31 0x00000010 +#define QEPIMR_RES ~(QEPIMR_PA15|QEPIMR_PA16|QEPIMR_PA29|QEPIMR_PA30|QEPIMR_PB3 \ + |QEPIMR_PB5|QEPIMR_PB12|QEPIMR_PB13|QEPIMR_PB26|QEPIMR_PB27 \ + |QEPIMR_PC27|QEPIMR_PC28|QEPIMR_PC29|QEPIMR_PD12|QEPIMR_PD13 \ + |QEPIMR_PD16|QEPIMR_PD17|QEPIMR_PD26|QEPIMR_PD27|QEPIMR_PE12 \ + |QEPIMR_PE13|QEPIMR_PE24|QEPIMR_PE25|QEPIMR_PE26|QEPIMR_PE27 \ + |QEPIMR_PE31|QEPIMR_PF20|QEPIMR_PG31) + u32 qepicr; /* QE Ports Interrupt Control Register */ +#define QEPICR_PA15 0x80000000 +#define QEPICR_PA16 0x40000000 +#define QEPICR_PA29 0x20000000 +#define QEPICR_PA30 0x10000000 +#define QEPICR_PB3 0x08000000 +#define QEPICR_PB5 0x04000000 +#define QEPICR_PB12 0x02000000 +#define QEPICR_PB13 0x01000000 +#define QEPICR_PB26 0x00800000 +#define QEPICR_PB27 0x00400000 +#define QEPICR_PC27 0x00200000 +#define QEPICR_PC28 0x00100000 +#define QEPICR_PC29 0x00080000 +#define QEPICR_PD12 0x00040000 +#define QEPICR_PD13 0x00020000 +#define QEPICR_PD16 0x00010000 +#define QEPICR_PD17 0x00008000 +#define QEPICR_PD26 0x00004000 +#define QEPICR_PD27 0x00002000 +#define QEPICR_PE12 0x00001000 +#define QEPICR_PE13 0x00000800 +#define QEPICR_PE24 0x00000400 +#define QEPICR_PE25 0x00000200 +#define QEPICR_PE26 0x00000100 +#define QEPICR_PE27 0x00000080 +#define QEPICR_PE31 0x00000040 +#define QEPICR_PF20 0x00000020 +#define QEPICR_PG31 0x00000010 +#define QEPICR_RES ~(QEPICR_PA15|QEPICR_PA16|QEPICR_PA29|QEPICR_PA30|QEPICR_PB3 \ + |QEPICR_PB5|QEPICR_PB12|QEPICR_PB13|QEPICR_PB26|QEPICR_PB27 \ + |QEPICR_PC27|QEPICR_PC28|QEPICR_PC29|QEPICR_PD12|QEPICR_PD13 \ + |QEPICR_PD16|QEPICR_PD17|QEPICR_PD26|QEPICR_PD27|QEPICR_PE12 \ + |QEPICR_PE13|QEPICR_PE24|QEPICR_PE25|QEPICR_PE26|QEPICR_PE27 \ + |QEPICR_PE31|QEPICR_PF20|QEPICR_PG31) + u8 res1[0xE8]; +} qepi83xx_t; + +/* + * general purpose I/O module + */ +typedef struct gpio_n { + u32 podr; /* Open Drain Register */ + u32 pdat; /* Data Register */ + u32 dir1; /* direction register 1 */ + u32 dir2; /* direction register 2 */ + u32 ppar1; /* Pin Assignment Register 1 */ + u32 ppar2; /* Pin Assignment Register 2 */ +} gpio_n_t; + +typedef struct gpio83xx { + gpio_n_t ioport[0x7]; + u8 res0[0x358]; +} gpio83xx_t; + +/* + * QE Secondary Bus Access Windows + */ + +typedef struct qesba83xx { + u32 lbmcsar; /* Local bus memory controller start address */ +#define LBMCSAR_SA 0x000FFFFF /* 20 most-significant bits of the start address */ +#define LBMCSAR_RES ~(LBMCSAR_SA) + u32 sdmcsar; /* Secondary DDR memory controller start address */ +#define SDMCSAR_SA 0x000FFFFF /* 20 most-significant bits of the start address */ +#define SDMCSAR_RES ~(SDMCSAR_SA) + u8 res0[0x38]; + u32 lbmcear; /* Local bus memory controller end address */ +#define LBMCEAR_EA 0x000FFFFF /* 20 most-significant bits of the end address */ +#define LBMCEAR_RES ~(LBMCEAR_EA) + u32 sdmcear; /* Secondary DDR memory controller end address */ +#define SDMCEAR_EA 0x000FFFFF /* 20 most-significant bits of the end address */ +#define SDMCEAR_RES ~(SDMCEAR_EA) + u8 res1[0x38]; + u32 lbmcar; /* Local bus memory controller attributes */ +#define LBMCAR_WEN 0x00000001 /* Forward transactions to the QE local bus */ +#define LBMCAR_RES ~(LBMCAR_WEN) + u32 sdmcar; /* Secondary DDR memory controller attributes */ +#define SDMCAR_WEN 0x00000001 /* Forward transactions to the second DDR bus */ +#define SDMCAR_RES ~(SDMCAR_WEN) + u8 res2[0x778]; +} qesba83xx_t; +#endif /* * DDR Memory Controller Memory Map */ -typedef struct ddr_cs_bnds{ +typedef struct ddr_cs_bnds { u32 csbnds; #define CSBNDS_SA 0x00FF0000 #define CSBNDS_SA_SHIFT 8 #define CSBNDS_EA 0x000000FF #define CSBNDS_EA_SHIFT 24 - u8 res0[4]; + u8 res0[4]; } ddr_cs_bnds_t; -typedef struct ddr8349{ - ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */ +typedef struct ddr83xx { + ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */ u8 res0[0x60]; - u32 cs_config[4]; /**< Chip Select x Configuration */ + u32 cs_config[4]; /**< Chip Select x Configuration */ #define CSCONFIG_EN 0x80000000 #define CSCONFIG_AP 0x00800000 #define CSCONFIG_ROW_BIT 0x00000700 @@ -598,7 +941,7 @@ typedef struct ddr8349{ #define CSCONFIG_COL_BIT_10 0x00000002 #define CSCONFIG_COL_BIT_11 0x00000003 u8 res1[0x78]; - u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */ + u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */ #define TIMING_CFG1_PRETOACT 0x70000000 #define TIMING_CFG1_PRETOACT_SHIFT 28 #define TIMING_CFG1_ACTTOPRE 0x0F000000 @@ -615,18 +958,18 @@ typedef struct ddr8349{ #define TIMING_CFG1_ACTTOACT_SHIFT 4 #define TIMING_CFG1_WRTORD 0x00000007 #define TIMING_CFG1_WRTORD_SHIFT 0 -#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */ -#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ +#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */ +#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ - u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */ + u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */ #define TIMING_CFG2_CPO 0x0F000000 #define TIMING_CFG2_CPO_SHIFT 24 #define TIMING_CFG2_ACSM 0x00080000 #define TIMING_CFG2_WR_DATA_DELAY 0x00001C00 #define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10 -#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ +#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ - u32 sdram_cfg; /**< SDRAM Control Configuration */ + u32 sdram_cfg; /**< SDRAM Control Configuration */ #define SDRAM_CFG_MEM_EN 0x80000000 #define SDRAM_CFG_SREN 0x40000000 #define SDRAM_CFG_ECC_EN 0x20000000 @@ -641,39 +984,39 @@ typedef struct ddr8349{ #define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 u8 res2[4]; - u32 sdram_mode; /**< SDRAM Mode Configuration */ + u32 sdram_mode; /**< SDRAM Mode Configuration */ #define SDRAM_MODE_ESD 0xFFFF0000 #define SDRAM_MODE_ESD_SHIFT 16 #define SDRAM_MODE_SD 0x0000FFFF #define SDRAM_MODE_SD_SHIFT 0 -#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */ -#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */ -#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */ -#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */ -#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */ -#define DDR_MODE_WEAK 0x0002 /* weak drivers */ -#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */ -#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */ -#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */ -#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */ -#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */ -#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */ -#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */ -#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */ -#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */ -#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */ -#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125 µs */ -#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */ -#define DDR_MODE_MODEREG 0x0000 /* select mode register */ +#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */ +#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */ +#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */ +#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */ +#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */ +#define DDR_MODE_WEAK 0x0002 /* weak drivers */ +#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */ +#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */ +#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */ +#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */ +#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */ +#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */ +#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */ +#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */ +#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */ +#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */ +#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125 µs */ +#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */ +#define DDR_MODE_MODEREG 0x0000 /* select mode register */ u8 res3[8]; - u32 sdram_interval; /**< SDRAM Interval Configuration */ + u32 sdram_interval; /**< SDRAM Interval Configuration */ #define SDRAM_INTERVAL_REFINT 0x3FFF0000 #define SDRAM_INTERVAL_REFINT_SHIFT 16 #define SDRAM_INTERVAL_BSTOPRE 0x00003FFF #define SDRAM_INTERVAL_BSTOPRE_SHIFT 0 - u8 res9[8]; - u32 sdram_clk_cntl; + u8 res9[8]; + u32 sdram_clk_cntl; #define DDR_SDRAM_CLK_CNTL_SS_EN 0x80000000 #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025 0x01000000 #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 0x02000000 @@ -681,39 +1024,39 @@ typedef struct ddr8349{ #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_1 0x04000000 u8 res4[0xCCC]; - u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */ - u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */ - u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */ + u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */ + u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */ + u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */ #define ECC_ERR_INJECT_EMB (0x80000000>>22) /* ECC Mirror Byte */ #define ECC_ERR_INJECT_EIEN (0x80000000>>23) /* Error Injection Enable */ #define ECC_ERR_INJECT_EEIM (0xff000000>>24) /* ECC Erroe Injection Enable */ #define ECC_ERR_INJECT_EEIM_SHIFT 0 u8 res5[0x14]; - u32 capture_data_hi; /**< Memory Data Path Read Capture High */ - u32 capture_data_lo; /**< Memory Data Path Read Capture Low */ - u32 capture_ecc; /**< Memory Data Path Read Capture ECC */ + u32 capture_data_hi; /**< Memory Data Path Read Capture High */ + u32 capture_data_lo; /**< Memory Data Path Read Capture Low */ + u32 capture_ecc; /**< Memory Data Path Read Capture ECC */ #define CAPTURE_ECC_ECE (0xff000000>>24) #define CAPTURE_ECC_ECE_SHIFT 0 u8 res6[0x14]; - u32 err_detect; /**< Memory Error Detect */ -#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ + u32 err_detect; /**< Memory Error Detect */ +#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ #define ECC_ERROR_DETECT_MBE (0x80000000>>28) /* Multiple-Bit Error */ #define ECC_ERROR_DETECT_SBE (0x80000000>>29) /* Single-Bit ECC Error Pickup */ #define ECC_ERROR_DETECT_MSE (0x80000000>>31) /* Memory Select Error */ - u32 err_disable; /**< Memory Error Disable */ + u32 err_disable; /**< Memory Error Disable */ #define ECC_ERROR_DISABLE_MBED (0x80000000>>28) /* Multiple-Bit ECC Error Disable */ #define ECC_ERROR_DISABLE_SBED (0x80000000>>29) /* Sinle-Bit ECC Error disable */ #define ECC_ERROR_DISABLE_MSED (0x80000000>>31) /* Memory Select Error Disable */ #define ECC_ERROR_ENABLE ~(ECC_ERROR_DISABLE_MSED|ECC_ERROR_DISABLE_SBED|ECC_ERROR_DISABLE_MBED) - u32 err_int_en; /**< Memory Error Interrupt Enable */ + u32 err_int_en; /**< Memory Error Interrupt Enable */ #define ECC_ERR_INT_EN_MBEE (0x80000000>>28) /* Multiple-Bit ECC Error Interrupt Enable */ #define ECC_ERR_INT_EN_SBEE (0x80000000>>29) /* Single-Bit ECC Error Interrupt Enable */ #define ECC_ERR_INT_EN_MSEE (0x80000000>>31) /* Memory Select Error Interrupt Enable */ #define ECC_ERR_INT_DISABLE ~(ECC_ERR_INT_EN_MBEE|ECC_ERR_INT_EN_SBEE|ECC_ERR_INT_EN_MSEE) - u32 capture_attributes; /**< Memory Error Attributes Capture */ -#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ + u32 capture_attributes; /**< Memory Error Attributes Capture */ +#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ #define ECC_CAPT_ATTR_BNUM_SHIFT 28 -#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ +#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ #define ECC_CAPT_ATTR_TSIZ_FOUR_DW 0 #define ECC_CAPT_ATTR_TSIZ_ONE_DW 1 #define ECC_CAPT_ATTR_TSIZ_TWO_DW 2 @@ -738,73 +1081,72 @@ typedef struct ddr8349{ #define ECC_CAPT_ATTR_TTYP_R_M_W 0x3 #define ECC_CAPT_ATTR_TTYP_SHIFT 12 #define ECC_CAPT_ATTR_VLD (0x80000000>>31) /* Valid */ - u32 capture_address; /**< Memory Error Address Capture */ + u32 capture_address; /**< Memory Error Address Capture */ u32 capture_ext_address;/**< Memory Error Extended Address Capture */ - u32 err_sbe; /**< Memory Single-Bit ECC Error Management */ -#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255*/ + u32 err_sbe; /**< Memory Single-Bit ECC Error Management */ +#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255 */ #define ECC_ERROR_MAN_SBET_SHIFT 16 -#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255*/ +#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */ #define ECC_ERROR_MAN_SBEC_SHIFT 0 u8 res7[0xA4]; u32 debug_reg; u8 res8[0xFC]; -} ddr8349_t; +} ddr83xx_t; /* * I2C1 Controller */ - /* * DUART */ -typedef struct duart8349{ +typedef struct duart83xx { u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */ - u8 uier_udmb; /**< combined register for UIER and UDMB */ + u8 uier_udmb; /**< combined register for UIER and UDMB */ u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */ - u8 ulcr; /**< line control register */ - u8 umcr; /**< MODEM control register */ - u8 ulsr; /**< line status register */ - u8 umsr; /**< MODEM status register */ - u8 uscr; /**< scratch register */ + u8 ulcr; /**< line control register */ + u8 umcr; /**< MODEM control register */ + u8 ulsr; /**< line status register */ + u8 umsr; /**< MODEM status register */ + u8 uscr; /**< scratch register */ u8 res0[8]; - u8 udsr; /**< DMA status register */ + u8 udsr; /**< DMA status register */ u8 res1[3]; u8 res2[0xEC]; -} duart8349_t; +} duart83xx_t; /* * Local Bus Controller Registers */ -typedef struct lbus_bank{ - u32 br; /**< Base Register */ - u32 or; /**< Base Register */ +typedef struct lbus_bank { + u32 br; /**< Base Register */ + u32 or; /**< Base Register */ } lbus_bank_t; -typedef struct lbus8349 { +typedef struct lbus83xx { lbus_bank_t bank[8]; u8 res0[0x28]; - u32 mar; /**< UPM Address Register */ + u32 mar; /**< UPM Address Register */ u8 res1[0x4]; - u32 mamr; /**< UPMA Mode Register */ - u32 mbmr; /**< UPMB Mode Register */ - u32 mcmr; /**< UPMC Mode Register */ + u32 mamr; /**< UPMA Mode Register */ + u32 mbmr; /**< UPMB Mode Register */ + u32 mcmr; /**< UPMC Mode Register */ u8 res2[0x8]; - u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ - u32 mdr; /**< UPM Data Register */ + u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ + u32 mdr; /**< UPM Data Register */ u8 res3[0x8]; - u32 lsdmr; /**< SDRAM Mode Register */ + u32 lsdmr; /**< SDRAM Mode Register */ u8 res4[0x8]; - u32 lurt; /**< UPM Refresh Timer */ - u32 lsrt; /**< SDRAM Refresh Timer */ + u32 lurt; /**< UPM Refresh Timer */ + u32 lsrt; /**< SDRAM Refresh Timer */ u8 res5[0x8]; - u32 ltesr; /**< Transfer Error Status Register */ - u32 ltedr; /**< Transfer Error Disable Register */ - u32 lteir; /**< Transfer Error Interrupt Register */ - u32 lteatr; /**< Transfer Error Attributes Register */ - u32 ltear; /**< Transfer Error Address Register */ + u32 ltesr; /**< Transfer Error Status Register */ + u32 ltedr; /**< Transfer Error Disable Register */ + u32 lteir; /**< Transfer Error Interrupt Register */ + u32 lteatr; /**< Transfer Error Attributes Register */ + u32 ltear; /**< Transfer Error Address Register */ u8 res6[0xC]; - u32 lbcr; /**< Configuration Register */ + u32 lbcr; /**< Configuration Register */ #define LBCR_LDIS 0x80000000 #define LBCR_LDIS_SHIFT 31 #define LBCR_BCTLC 0x00C00000 @@ -815,7 +1157,7 @@ typedef struct lbus8349 { #define LBCR_EPAR_SHIFT 16 #define LBCR_BMT 0x0000FF00 #define LBCR_BMT_SHIFT 8 - u32 lcrr; /**< Clock Ratio Register */ + u32 lcrr; /**< Clock Ratio Register */ #define LCRR_DBYP 0x80000000 #define LCRR_DBYP_SHIFT 31 #define LCRR_BUFCMDC 0x30000000 @@ -827,120 +1169,119 @@ typedef struct lbus8349 { #define LCRR_CLKDIV 0x0000000F #define LCRR_CLKDIV_SHIFT 0 - u8 res7[0x28]; u8 res8[0xF00]; -} lbus8349_t; +} lbus83xx_t; +#if defined (CONFIG_MPC8349) /* * Serial Peripheral Interface */ -typedef struct spi8349 -{ +typedef struct spi83xx { u32 mode; /**< mode register */ u32 event; /**< event register */ u32 mask; /**< mask register */ u32 com; /**< command register */ u8 res0[0x10]; - u32 tx; /**< transmit register */ - u32 rx; /**< receive register */ + u32 tx; /**< transmit register */ + u32 rx; /**< receive register */ u8 res1[0xD8]; -} spi8349_t; - +} spi83xx_t; +#endif /* * DMA/Messaging Unit */ -typedef struct dma8349 { - u32 res0[0xC]; /* 0x0-0x29 reseverd */ - u32 omisr; /* 0x30 Outbound message interrupt status register */ - u32 omimr; /* 0x34 Outbound message interrupt mask register */ - u32 res1[0x6]; /* 0x38-0x49 reserved */ - - u32 imr0; /* 0x50 Inbound message register 0 */ - u32 imr1; /* 0x54 Inbound message register 1 */ - u32 omr0; /* 0x58 Outbound message register 0 */ - u32 omr1; /* 0x5C Outbound message register 1 */ - - u32 odr; /* 0x60 Outbound doorbell register */ - u32 res2; /* 0x64-0x67 reserved */ - u32 idr; /* 0x68 Inbound doorbell register */ - u32 res3[0x5]; /* 0x6C-0x79 reserved */ - - u32 imisr; /* 0x80 Inbound message interrupt status register */ - u32 imimr; /* 0x84 Inbound message interrupt mask register */ - u32 res4[0x1E]; /* 0x88-0x99 reserved */ - - u32 dmamr0; /* 0x100 DMA 0 mode register */ - u32 dmasr0; /* 0x104 DMA 0 status register */ - u32 dmacdar0; /* 0x108 DMA 0 current descriptor address register */ - u32 res5; /* 0x10C reserved */ - u32 dmasar0; /* 0x110 DMA 0 source address register */ - u32 res6; /* 0x114 reserved */ - u32 dmadar0; /* 0x118 DMA 0 destination address register */ - u32 res7; /* 0x11C reserved */ - u32 dmabcr0; /* 0x120 DMA 0 byte count register */ - u32 dmandar0; /* 0x124 DMA 0 next descriptor address register */ - u32 res8[0x16]; /* 0x128-0x179 reserved */ - - u32 dmamr1; /* 0x180 DMA 1 mode register */ - u32 dmasr1; /* 0x184 DMA 1 status register */ - u32 dmacdar1; /* 0x188 DMA 1 current descriptor address register */ - u32 res9; /* 0x18C reserved */ - u32 dmasar1; /* 0x190 DMA 1 source address register */ - u32 res10; /* 0x194 reserved */ - u32 dmadar1; /* 0x198 DMA 1 destination address register */ - u32 res11; /* 0x19C reserved */ - u32 dmabcr1; /* 0x1A0 DMA 1 byte count register */ - u32 dmandar1; /* 0x1A4 DMA 1 next descriptor address register */ - u32 res12[0x16];/* 0x1A8-0x199 reserved */ - - u32 dmamr2; /* 0x200 DMA 2 mode register */ - u32 dmasr2; /* 0x204 DMA 2 status register */ - u32 dmacdar2; /* 0x208 DMA 2 current descriptor address register */ - u32 res13; /* 0x20C reserved */ - u32 dmasar2; /* 0x210 DMA 2 source address register */ - u32 res14; /* 0x214 reserved */ - u32 dmadar2; /* 0x218 DMA 2 destination address register */ - u32 res15; /* 0x21C reserved */ - u32 dmabcr2; /* 0x220 DMA 2 byte count register */ - u32 dmandar2; /* 0x224 DMA 2 next descriptor address register */ - u32 res16[0x16];/* 0x228-0x279 reserved */ - - u32 dmamr3; /* 0x280 DMA 3 mode register */ - u32 dmasr3; /* 0x284 DMA 3 status register */ - u32 dmacdar3; /* 0x288 DMA 3 current descriptor address register */ - u32 res17; /* 0x28C reserved */ - u32 dmasar3; /* 0x290 DMA 3 source address register */ - u32 res18; /* 0x294 reserved */ - u32 dmadar3; /* 0x298 DMA 3 destination address register */ - u32 res19; /* 0x29C reserved */ - u32 dmabcr3; /* 0x2A0 DMA 3 byte count register */ - u32 dmandar3; /* 0x2A4 DMA 3 next descriptor address register */ - - u32 dmagsr; /* 0x2A8 DMA general status register */ - u32 res20[0x15];/* 0x2AC-0x2FF reserved */ -} dma8349_t; +typedef struct dma83xx { + u32 res0[0xC]; /* 0x0-0x29 reseverd */ + u32 omisr; /* 0x30 Outbound message interrupt status register */ + u32 omimr; /* 0x34 Outbound message interrupt mask register */ + u32 res1[0x6]; /* 0x38-0x49 reserved */ + + u32 imr0; /* 0x50 Inbound message register 0 */ + u32 imr1; /* 0x54 Inbound message register 1 */ + u32 omr0; /* 0x58 Outbound message register 0 */ + u32 omr1; /* 0x5C Outbound message register 1 */ + + u32 odr; /* 0x60 Outbound doorbell register */ + u32 res2; /* 0x64-0x67 reserved */ + u32 idr; /* 0x68 Inbound doorbell register */ + u32 res3[0x5]; /* 0x6C-0x79 reserved */ + + u32 imisr; /* 0x80 Inbound message interrupt status register */ + u32 imimr; /* 0x84 Inbound message interrupt mask register */ + u32 res4[0x1E]; /* 0x88-0x99 reserved */ + + u32 dmamr0; /* 0x100 DMA 0 mode register */ + u32 dmasr0; /* 0x104 DMA 0 status register */ + u32 dmacdar0; /* 0x108 DMA 0 current descriptor address register */ + u32 res5; /* 0x10C reserved */ + u32 dmasar0; /* 0x110 DMA 0 source address register */ + u32 res6; /* 0x114 reserved */ + u32 dmadar0; /* 0x118 DMA 0 destination address register */ + u32 res7; /* 0x11C reserved */ + u32 dmabcr0; /* 0x120 DMA 0 byte count register */ + u32 dmandar0; /* 0x124 DMA 0 next descriptor address register */ + u32 res8[0x16]; /* 0x128-0x179 reserved */ + + u32 dmamr1; /* 0x180 DMA 1 mode register */ + u32 dmasr1; /* 0x184 DMA 1 status register */ + u32 dmacdar1; /* 0x188 DMA 1 current descriptor address register */ + u32 res9; /* 0x18C reserved */ + u32 dmasar1; /* 0x190 DMA 1 source address register */ + u32 res10; /* 0x194 reserved */ + u32 dmadar1; /* 0x198 DMA 1 destination address register */ + u32 res11; /* 0x19C reserved */ + u32 dmabcr1; /* 0x1A0 DMA 1 byte count register */ + u32 dmandar1; /* 0x1A4 DMA 1 next descriptor address register */ + u32 res12[0x16]; /* 0x1A8-0x199 reserved */ + + u32 dmamr2; /* 0x200 DMA 2 mode register */ + u32 dmasr2; /* 0x204 DMA 2 status register */ + u32 dmacdar2; /* 0x208 DMA 2 current descriptor address register */ + u32 res13; /* 0x20C reserved */ + u32 dmasar2; /* 0x210 DMA 2 source address register */ + u32 res14; /* 0x214 reserved */ + u32 dmadar2; /* 0x218 DMA 2 destination address register */ + u32 res15; /* 0x21C reserved */ + u32 dmabcr2; /* 0x220 DMA 2 byte count register */ + u32 dmandar2; /* 0x224 DMA 2 next descriptor address register */ + u32 res16[0x16]; /* 0x228-0x279 reserved */ + + u32 dmamr3; /* 0x280 DMA 3 mode register */ + u32 dmasr3; /* 0x284 DMA 3 status register */ + u32 dmacdar3; /* 0x288 DMA 3 current descriptor address register */ + u32 res17; /* 0x28C reserved */ + u32 dmasar3; /* 0x290 DMA 3 source address register */ + u32 res18; /* 0x294 reserved */ + u32 dmadar3; /* 0x298 DMA 3 destination address register */ + u32 res19; /* 0x29C reserved */ + u32 dmabcr3; /* 0x2A0 DMA 3 byte count register */ + u32 dmandar3; /* 0x2A4 DMA 3 next descriptor address register */ + + u32 dmagsr; /* 0x2A8 DMA general status register */ + u32 res20[0x15]; /* 0x2AC-0x2FF reserved */ +} dma83xx_t; /* DMAMRn bits */ -#define DMA_CHANNEL_START (0x00000001) /* Bit - DMAMRn CS */ -#define DMA_CHANNEL_TRANSFER_MODE_DIRECT (0x00000004) /* Bit - DMAMRn CTM */ -#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN (0x00001000) /* Bit - DMAMRn SAHE */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B (0x00000000) /* 2Bit- DMAMRn SAHTS 1byte */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B (0x00004000) /* 2Bit- DMAMRn SAHTS 2bytes */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B (0x00008000) /* 2Bit- DMAMRn SAHTS 4bytes */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B (0x0000c000) /* 2Bit- DMAMRn SAHTS 8bytes */ -#define DMA_CHANNEL_SNOOP (0x00010000) /* Bit - DMAMRn DMSEN */ +#define DMA_CHANNEL_START (0x00000001) /* Bit - DMAMRn CS */ +#define DMA_CHANNEL_TRANSFER_MODE_DIRECT (0x00000004) /* Bit - DMAMRn CTM */ +#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN (0x00001000) /* Bit - DMAMRn SAHE */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B (0x00000000) /* 2Bit- DMAMRn SAHTS 1byte */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B (0x00004000) /* 2Bit- DMAMRn SAHTS 2bytes */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B (0x00008000) /* 2Bit- DMAMRn SAHTS 4bytes */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B (0x0000c000) /* 2Bit- DMAMRn SAHTS 8bytes */ +#define DMA_CHANNEL_SNOOP (0x00010000) /* Bit - DMAMRn DMSEN */ /* DMASRn bits */ -#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */ -#define DMA_CHANNEL_TRANSFER_ERROR (0x00000080) /* Bit - DMASRn TE */ +#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */ +#define DMA_CHANNEL_TRANSFER_ERROR (0x00000080) /* Bit - DMASRn TE */ /* * PCI Software Configuration Registers */ -typedef struct pciconf8349 { - u32 config_address; +typedef struct pciconf83xx { + u32 config_address; #define PCI_CONFIG_ADDRESS_EN 0x80000000 #define PCI_CONFIG_ADDRESS_BN_SHIFT 16 #define PCI_CONFIG_ADDRESS_BN_MASK 0x00ff0000 @@ -952,31 +1293,32 @@ typedef struct pciconf8349 { #define PCI_CONFIG_ADDRESS_RN_MASK 0x000000fc u32 config_data; u32 int_ack; - u8 res[116]; -} pciconf8349_t; + u8 res[116]; +} pciconf83xx_t; /* * PCI Outbound Translation Register */ typedef struct pci_outbound_window { - u32 potar; - u8 res0[4]; - u32 pobar; - u8 res1[4]; - u32 pocmr; - u8 res2[4]; -} pot8349_t; + u32 potar; + u8 res0[4]; + u32 pobar; + u8 res1[4]; + u32 pocmr; + u8 res2[4]; +} pot83xx_t; + /* * Sequencer */ -typedef struct ios8349 { - pot8349_t pot[6]; +typedef struct ios83xx { + pot83xx_t pot[6]; #define POTAR_TA_MASK 0x000fffff #define POBAR_BA_MASK 0x000fffff #define POCMR_EN 0x80000000 #define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */ #define POCMR_SE 0x20000000 /* streaming enable */ -#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2*/ +#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */ #define POCMR_CM_MASK 0x000fffff #define POCMR_CM_4G 0x00000000 #define POCMR_CM_2G 0x00080000 @@ -999,18 +1341,18 @@ typedef struct ios8349 { #define POCMR_CM_16K 0x000FFFFC #define POCMR_CM_8K 0x000FFFFE #define POCMR_CM_4K 0x000FFFFF - u8 res0[0x60]; - u32 pmcr; - u8 res1[4]; - u32 dtcr; - u8 res2[4]; -} ios8349_t; + u8 res0[0x60]; + u32 pmcr; + u8 res1[4]; + u32 dtcr; + u8 res2[4]; +} ios83xx_t; /* * PCI Controller Control and Status Registers */ -typedef struct pcictrl8349 { - u32 esr; +typedef struct pcictrl83xx { + u32 esr; #define ESR_MERR 0x80000000 #define ESR_APAR 0x00000400 #define ESR_PCISERR 0x00000200 @@ -1018,7 +1360,7 @@ typedef struct pcictrl8349 { #define ESR_TPERR 0x00000080 #define ESR_NORSP 0x00000040 #define ESR_TABT 0x00000020 - u32 ecdr; + u32 ecdr; #define ECDR_APAR 0x00000400 #define ECDR_PCISERR 0x00000200 #define ECDR_MPERR 0x00000100 @@ -1032,7 +1374,7 @@ typedef struct pcictrl8349 { #define EER_TPERR 0x00000080 #define EER_NORSP 0x00000040 #define EER_TABT 0x00000020 - u32 eatcr; + u32 eatcr; #define EATCR_ERRTYPR_MASK 0x70000000 #define EATCR_ERRTYPR_APR 0x00000000 /* address parity error */ #define EATCR_ERRTYPR_WDPR 0x10000000 /* write data parity error */ @@ -1061,37 +1403,46 @@ typedef struct pcictrl8349 { #define EATCR_ES_EM 0x00000000 /* external master */ #define EATCR_ES_DMA 0x00050000 #define EATCR_CMD_MASK 0x0000f000 -#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable*/ +#if defined (CONFIG_MPC8349) +#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable */ +#endif #define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */ +#if defined (CONFIG_MPC8349) #define EATCR_HPB 0x00000004 /* high parity bit */ -#define EATCR_PB 0x00000002 /* parity bit*/ +#endif +#define EATCR_PB 0x00000002 /* parity bit */ #define EATCR_VI 0x00000001 /* error information valid */ - u32 eacr; - u32 eeacr; - u32 edlcr; - u32 edhcr; - u32 gcr; - u32 ecr; - u32 gsr; - u8 res0[12]; - u32 pitar2; - u8 res1[4]; - u32 pibar2; - u32 piebar2; - u32 piwar2; - u8 res2[4]; - u32 pitar1; - u8 res3[4]; - u32 pibar1; - u32 piebar1; - u32 piwar1; - u8 res4[4]; - u32 pitar0; - u8 res5[4]; - u32 pibar0; - u8 res6[4]; - u32 piwar0; - u8 res7[132]; + u32 eacr; + u32 eeacr; +#if defined (CONFIG_MPC8349) + u32 edlcr; + u32 edhcr; +#elif defined (CONFIG_MPC8360) + u32 edcr; /* was edlcr */ + u8 res_edcr[0x4]; +#endif + u32 gcr; + u32 ecr; + u32 gsr; + u8 res0[12]; + u32 pitar2; + u8 res1[4]; + u32 pibar2; + u32 piebar2; + u32 piwar2; + u8 res2[4]; + u32 pitar1; + u8 res3[4]; + u32 pibar1; + u32 piebar1; + u32 piwar1; + u8 res4[4]; + u32 pitar0; + u8 res5[4]; + u32 pibar0; + u8 res6[4]; + u32 piwar0; + u8 res7[132]; #define PITAR_TA_MASK 0x000fffff #define PIBAR_MASK 0xffffffff #define PIEBAR_EBA_MASK 0x000fffff @@ -1124,63 +1475,606 @@ typedef struct pcictrl8349 { #define PIWAR_IWS_512M 0x0000001C #define PIWAR_IWS_1G 0x0000001D #define PIWAR_IWS_2G 0x0000001E -} pcictrl8349_t; +} pcictrl83xx_t; +#if defined (CONFIG_MPC8349) /* * USB */ -typedef struct usb8349 { +typedef struct usb83xx { u8 fixme[0x2000]; -} usb8349_t; +} usb83xx_t; /* * TSEC */ -typedef struct tsec8349 { +typedef struct tsec83xx { u8 fixme[0x1000]; -} tsec8349_t; +} tsec83xx_t; +#endif /* * Security */ -typedef struct security8349 { +typedef struct security83xx { u8 fixme[0x10000]; -} security8349_t; +} security83xx_t; + +#if defined (CONFIG_MPC8360) +/* + * iram + */ +typedef struct iram83xx { + u32 iadd; /* I-RAM address register */ + u32 idata; /* I-RAM data register */ + u8 res0[0x78]; +} iram83xx_t; + +/* + * Interrupt Controller + */ +typedef struct irq83xx { + u32 cicr; /* QE system interrupt configuration */ + u32 civec; /* QE system interrupt vector register */ + u32 cripnr; /* QE RISC interrupt pending register */ + u32 cipnr; /* QE system interrupt pending register */ + u32 cipxcc; /* QE interrupt priority register */ + u32 cipycc; /* QE interrupt priority register */ + u32 cipwcc; /* QE interrupt priority register */ + u32 cipzcc; /* QE interrupt priority register */ + u32 cimr; /* QE system interrupt mask register */ + u32 crimr; /* QE RISC interrupt mask register */ + u32 cicnr; /* QE system interrupt control register */ + u8 res0[0x4]; + u32 ciprta; /* QE system interrupt priority register for RISC tasks A */ + u32 ciprtb; /* QE system interrupt priority register for RISC tasks B */ + u8 res1[0x4]; + u32 cricr; /* QE system RISC interrupt control */ + u8 res2[0x20]; + u32 chivec; /* QE high system interrupt vector */ + u8 res3[0x1C]; +} irq83xx_t; + +/* + * Communications Processor + */ +typedef struct cp83xx { + u32 cecr; /* QE command register */ + u32 ceccr; /* QE controller configuration register */ + u32 cecdr; /* QE command data register */ + u8 res0[0xA]; + u16 ceter; /* QE timer event register */ + u8 res1[0x2]; + u16 cetmr; /* QE timers mask register */ + u32 cetscr; /* QE time-stamp timer control register */ + u32 cetsr1; /* QE time-stamp register 1 */ + u32 cetsr2; /* QE time-stamp register 2 */ + u8 res2[0x8]; + u32 cevter; /* QE virtual tasks event register */ + u32 cevtmr; /* QE virtual tasks mask register */ + u16 cercr; /* QE RAM control register */ + u8 res3[0x2]; + u8 res4[0x24]; + u16 ceexe1; /* QE external request 1 event register */ + u8 res5[0x2]; + u16 ceexm1; /* QE external request 1 mask register */ + u8 res6[0x2]; + u16 ceexe2; /* QE external request 2 event register */ + u8 res7[0x2]; + u16 ceexm2; /* QE external request 2 mask register */ + u8 res8[0x2]; + u16 ceexe3; /* QE external request 3 event register */ + u8 res9[0x2]; + u16 ceexm3; /* QE external request 3 mask register */ + u8 res10[0x2]; + u16 ceexe4; /* QE external request 4 event register */ + u8 res11[0x2]; + u16 ceexm4; /* QE external request 4 mask register */ + u8 res12[0x2]; + u8 res13[0x280]; +} cp83xx_t; + +/* + * QE Multiplexer + */ + +typedef struct qmx83xx { + u32 cmxgcr; /* CMX general clock route register */ + u32 cmxsi1cr_l; /* CMX SI1 clock route low register */ + u32 cmxsi1cr_h; /* CMX SI1 clock route high register */ + u32 cmxsi1syr; /* CMX SI1 SYNC route register */ + u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */ + u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */ + u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */ + u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */ + u32 cmxupcr; /* CMX UPC clock route register */ + u8 res0[0x1C]; +} qmx83xx_t; + +/* +* QE Timers +*/ + +typedef struct qet83xx { + u8 gtcfr1; /* Timer 1 and Timer 2 global configuration register */ + u8 res0[0x3]; + u8 gtcfr2; /* Timer 3 and timer 4 global configuration register */ + u8 res1[0xB]; + u16 gtmdr1; /* Timer 1 mode register */ + u16 gtmdr2; /* Timer 2 mode register */ + u16 gtrfr1; /* Timer 1 reference register */ + u16 gtrfr2; /* Timer 2 reference register */ + u16 gtcpr1; /* Timer 1 capture register */ + u16 gtcpr2; /* Timer 2 capture register */ + u16 gtcnr1; /* Timer 1 counter */ + u16 gtcnr2; /* Timer 2 counter */ + u16 gtmdr3; /* Timer 3 mode register */ + u16 gtmdr4; /* Timer 4 mode register */ + u16 gtrfr3; /* Timer 3 reference register */ + u16 gtrfr4; /* Timer 4 reference register */ + u16 gtcpr3; /* Timer 3 capture register */ + u16 gtcpr4; /* Timer 4 capture register */ + u16 gtcnr3; /* Timer 3 counter */ + u16 gtcnr4; /* Timer 4 counter */ + u16 gtevr1; /* Timer 1 event register */ + u16 gtevr2; /* Timer 2 event register */ + u16 gtevr3; /* Timer 3 event register */ + u16 gtevr4; /* Timer 4 event register */ + u16 gtps; /* Timer 1 prescale register */ + u8 res2[0x46]; +} qet83xx_t; + +/* +* spi +*/ + +typedef struct spi83xx { + u8 res0[0x20]; + u32 spmode; /* SPI mode register */ + u8 res1[0x2]; + u8 spie; /* SPI event register */ + u8 res2[0x1]; + u8 res3[0x2]; + u8 spim; /* SPI mask register */ + u8 res4[0x1]; + u8 res5[0x1]; + u8 spcom; /* SPI command register */ + u8 res6[0x2]; + u32 spitd; /* SPI transmit data register (cpu mode) */ + u32 spird; /* SPI receive data register (cpu mode) */ + u8 res7[0x8]; +} spi83xx_t; + +/* +* mcc +*/ + +typedef struct mcc83xx { + u32 mcce; /* MCC event register */ + u32 mccm; /* MCC mask register */ + u32 mccf; /* MCC configuration register */ + u32 merl; /* MCC emergency request level register */ + u8 res0[0xF0]; +} mcc83xx_t; + +/* +* brg +*/ + +typedef struct brg83xx { + u32 brgc1; /* BRG1 configuration register */ + u32 brgc2; /* BRG2 configuration register */ + u32 brgc3; /* BRG3 configuration register */ + u32 brgc4; /* BRG4 configuration register */ + u32 brgc5; /* BRG5 configuration register */ + u32 brgc6; /* BRG6 configuration register */ + u32 brgc7; /* BRG7 configuration register */ + u32 brgc8; /* BRG8 configuration register */ + u32 brgc9; /* BRG9 configuration register */ + u32 brgc10; /* BRG10 configuration register */ + u32 brgc11; /* BRG11 configuration register */ + u32 brgc12; /* BRG12 configuration register */ + u32 brgc13; /* BRG13 configuration register */ + u32 brgc14; /* BRG14 configuration register */ + u32 brgc15; /* BRG15 configuration register */ + u32 brgc16; /* BRG16 configuration register */ + u8 res0[0x40]; +} brg83xx_t; + +/* +* USB +*/ + +typedef struct usb83xx { + u8 usmod; /* USB mode register */ + u8 usadd; /* USB address register */ + u8 uscom; /* USB command register */ + u8 res0[0x1]; + u16 usep0; /* USB endpoint register 0 */ + u16 usep1; /* USB endpoint register 1 */ + u16 usep2; /* USB endpoint register 2 */ + u16 usep3; /* USB endpoint register 3 */ + u8 res1[0x4]; + u16 usber; /* USB event register */ + u8 res2[0x2]; + u16 usbmr; /* USB mask register */ + u8 res3[0x1]; + u8 usbs; /* USB status register */ + u32 ussft; /* USB start of frame timer */ + u8 res4[0x24]; +} usb83xx_t; + +/* +* SI +*/ + +typedef struct si1_83xx { + u16 siamr1; /* SI1 TDMA mode register */ + u16 sibmr1; /* SI1 TDMB mode register */ + u16 sicmr1; /* SI1 TDMC mode register */ + u16 sidmr1; /* SI1 TDMD mode register */ + u8 siglmr1_h; /* SI1 global mode register high */ + u8 res0[0x1]; + u8 sicmdr1_h; /* SI1 command register high */ + u8 res2[0x1]; + u8 sistr1_h; /* SI1 status register high */ + u8 res3[0x1]; + u16 sirsr1_h; /* SI1 RAM shadow address register high */ + u8 sitarc1; /* SI1 RAM counter Tx TDMA */ + u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ + u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ + u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ + u8 sirarc1; /* SI1 RAM counter Rx TDMA */ + u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ + u8 sircrc1; /* SI1 RAM counter Rx TDMC */ + u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ + u8 res4[0x8]; + u16 siemr1; /* SI1 TDME mode register 16 bits */ + u16 sifmr1; /* SI1 TDMF mode register 16 bits */ + u16 sigmr1; /* SI1 TDMG mode register 16 bits */ + u16 sihmr1; /* SI1 TDMH mode register 16 bits */ + u8 siglmg1_l; /* SI1 global mode register low 8 bits */ + u8 res5[0x1]; + u8 sicmdr1_l; /* SI1 command register low 8 bits */ + u8 res6[0x1]; + u8 sistr1_l; /* SI1 status register low 8 bits */ + u8 res7[0x1]; + u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */ + u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ + u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ + u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ + u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ + u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ + u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ + u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ + u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ + u8 res8[0x8]; + u32 siml1; /* SI1 multiframe limit register */ + u8 siedm1; /* SI1 extended diagnostic mode register */ + u8 res9[0xBB]; +} si1_83xx_t; + +/* +* SI Routing Tables +*/ + +typedef struct sir83xx { + u8 tx[0x400]; + u8 rx[0x400]; + u8 res0[0x800]; +} sir83xx_t; + +/* +* ucc +*/ + +typedef struct uslow { + u32 gumr_l; /* UCCx general mode register (low) */ + u32 gumr_h; /* UCCx general mode register (high) */ + u16 upsmr; /* UCCx protocol-specific mode register */ + u8 res0[0x2]; + u16 utodr; /* UCCx transmit on demand register */ + u16 udsr; /* UCCx data synchronization register */ + u16 ucce; /* UCCx event register */ + u8 res1[0x2]; + u16 uccm; /* UCCx mask register */ + u8 res2[0x1]; + u8 uccs; /* UCCx status register */ + u8 res3[0x1E8]; +} uslow_t; + +typedef struct ufast { + u32 gumr; /* UCCx general mode register */ + u32 upsmr; /* UCCx protocol-specific mode register */ + u16 utodr; /* UCCx transmit on demand register */ + u8 res0[0x2]; + u16 udsr; /* UCCx data synchronization register */ + u8 res1[0x2]; + u32 ucce; /* UCCx event register */ + u32 uccm; /* UCCx mask register. */ + u8 uccs; /* UCCx status register */ + u8 res2[0x7]; + u32 urfb; /* UCC receive FIFO base */ + u16 urfs; /* UCC receive FIFO size */ + u8 res3[0x2]; + u16 urfet; /* UCC receive FIFO emergency threshold */ + u16 urfset; /* UCC receive FIFO special emergency threshold */ + u32 utfb; /* UCC transmit FIFO base */ + u16 utfs; /* UCC transmit FIFO size */ + u8 res4[0x2]; + u16 utfet; /* UCC transmit FIFO emergency threshold */ + u8 res5[0x2]; + u16 utftt; /* UCC transmit FIFO transmit threshold */ + u8 res6[0x2]; + u16 utpt; /* UCC transmit polling timer */ + u32 urtry; /* UCC retry counter register */ + u8 res7[0x4C]; + u8 guemr; /* UCC general extended mode register */ + u8 res8[0x3]; + u8 res9[0x6C]; + u32 maccfg1; /* Mac configuration register #1 */ + u32 maccfg2; /* Mac configuration register #2 */ + u16 ipgifg; /* Interframe gap register */ + u8 res10[0x2]; + u32 hafdup; /* Half-duplex register */ + u8 res11[0xC]; + u32 emtr; /* Ethernet MAC test register */ + u32 miimcfg; /* MII mgmt configuration register */ + u32 miimcom; /* MII mgmt command register */ + u32 miimadd; /* MII mgmt address register */ + u32 miimcon; /* MII mgmt control register */ + u32 miistat; /* MII mgmt status register */ + u32 miimnd; /* MII mgmt indication register */ + u32 ifctl; /* Interface control register */ + u32 ifstat; /* Interface status register */ + u32 macstnaddr1; /* Station address part 1 register */ + u32 macstnaddr2; /* Station address part 2 register */ + u8 res12[0x8]; + u32 uempr; /* UCC Ethernet MAC parameter register */ + u32 utbipa; /* UCC TBI address */ + u16 uescr; /* UCC Ethernet statistics control register */ + u8 res13[0x26]; + u32 tx64; /* Transmit and receive 64-byte frame counter */ + u32 tx127; /* Transmit and receive 65- to 127-byte frame counter */ + u32 tx255; /* Transmit and receive 128- to 255-byte frame counter */ + u32 rx64; /* Receive and receive 64-byte frame counter */ + u32 rx127; /* Receive and receive 65- to 127-byte frame counter */ + u32 rx255; /* Receive and receive 128- to 255-byte frame counter */ + u32 txok; /* Transmit good bytes counter */ + u32 txcf; /* Transmit control frame counter */ + u32 tmca; /* Transmit multicast control frame counter */ + u32 tbca; /* Transmit broadcast packet counter */ + u32 rxfok; /* Receive frame OK counter */ + u32 rbyt; /* Receive good and bad bytes counter */ + u32 rxbok; /* Receive bytes OK counter */ + u32 rmca; /* Receive multicast packet counter */ + u32 rbca; /* Receive broadcast packet counter */ + u32 scar; /* Statistics carry register */ + u32 scam; /* Statistics carry mask register */ + u8 res14[0x3C]; +} ufast_t; + +typedef struct ucc83xx { + union { + uslow_t slow; + ufast_t fast; + }; +} ucc83xx_t; + +/* +* MultiPHY UTOPIA POS Controllers +*/ + +typedef struct upc83xx { + u32 upgcr; /* UTOPIA/POS general configuration register */ +#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ +#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ +#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ +#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing: */ +#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ + u32 uplpa; /* UTOPIA/POS last PHY address */ + u32 uphec; /* ATM HEC register */ + u32 upuc; /* UTOPIA/POS UCC configuration */ + u32 updc1; /* UTOPIA/POS device 1 configuration */ + u32 updc2; /* UTOPIA/POS device 2 configuration */ + u32 updc3; /* UTOPIA/POS device 3 configuration */ + u32 updc4; /* UTOPIA/POS device 4 configuration */ + u32 upstpa; /* UTOPIA/POS STPA threshold */ + u8 res0[0xC]; + u32 updrs1_h; /* UTOPIA/POS device 1 rate select */ + u32 updrs1_l; /* UTOPIA/POS device 1 rate select */ + u32 updrs2_h; /* UTOPIA/POS device 2 rate select */ + u32 updrs2_l; /* UTOPIA/POS device 2 rate select */ + u32 updrs3_h; /* UTOPIA/POS device 3 rate select */ + u32 updrs3_l; /* UTOPIA/POS device 3 rate select */ + u32 updrs4_h; /* UTOPIA/POS device 4 rate select */ + u32 updrs4_l; /* UTOPIA/POS device 4 rate select */ + u32 updrp1; /* UTOPIA/POS device 1 receive priority low */ + u32 updrp2; /* UTOPIA/POS device 2 receive priority low */ + u32 updrp3; /* UTOPIA/POS device 3 receive priority low */ + u32 updrp4; /* UTOPIA/POS device 4 receive priority low */ + u32 upde1; /* UTOPIA/POS device 1 event */ + u32 upde2; /* UTOPIA/POS device 2 event */ + u32 upde3; /* UTOPIA/POS device 3 event */ + u32 upde4; /* UTOPIA/POS device 4 event */ + u16 uprp1; + u16 uprp2; + u16 uprp3; + u16 uprp4; + u8 res1[0x8]; + u16 uptirr1_0; /* Device 1 transmit internal rate 0 */ + u16 uptirr1_1; /* Device 1 transmit internal rate 1 */ + u16 uptirr1_2; /* Device 1 transmit internal rate 2 */ + u16 uptirr1_3; /* Device 1 transmit internal rate 3 */ + u16 uptirr2_0; /* Device 2 transmit internal rate 0 */ + u16 uptirr2_1; /* Device 2 transmit internal rate 1 */ + u16 uptirr2_2; /* Device 2 transmit internal rate 2 */ + u16 uptirr2_3; /* Device 2 transmit internal rate 3 */ + u16 uptirr3_0; /* Device 3 transmit internal rate 0 */ + u16 uptirr3_1; /* Device 3 transmit internal rate 1 */ + u16 uptirr3_2; /* Device 3 transmit internal rate 2 */ + u16 uptirr3_3; /* Device 3 transmit internal rate 3 */ + u16 uptirr4_0; /* Device 4 transmit internal rate 0 */ + u16 uptirr4_1; /* Device 4 transmit internal rate 1 */ + u16 uptirr4_2; /* Device 4 transmit internal rate 2 */ + u16 uptirr4_3; /* Device 4 transmit internal rate 3 */ + u32 uper1; /* Device 1 port enable register */ + u32 uper2; /* Device 2 port enable register */ + u32 uper3; /* Device 3 port enable register */ + u32 uper4; /* Device 4 port enable register */ + u8 res2[0x150]; +} upc83xx_t; + +/* +* SDMA +*/ + +typedef struct sdma83xx { + u32 sdsr; /* Serial DMA status register */ + u32 sdmr; /* Serial DMA mode register */ + u32 sdtr1; /* SDMA system bus threshold register */ + u32 sdtr2; /* SDMA secondary bus threshold register */ + u32 sdhy1; /* SDMA system bus hysteresis register */ + u32 sdhy2; /* SDMA secondary bus hysteresis register */ + u32 sdta1; /* SDMA system bus address register */ + u32 sdta2; /* SDMA secondary bus address register */ + u32 sdtm1; /* SDMA system bus MSNUM register */ + u32 sdtm2; /* SDMA secondary bus MSNUM register */ + u8 res0[0x10]; + u32 sdaqr; /* SDMA address bus qualify register */ + u32 sdaqmr; /* SDMA address bus qualify mask register */ + u8 res1[0x4]; + u32 sdwbcr; /* SDMA CAM entries base register */ + u8 res2[0x38]; +} sdma83xx_t; + +/* +* Debug Space +*/ + +typedef struct dbg83xx { + u32 bpdcr; /* Breakpoint debug command register */ + u32 bpdsr; /* Breakpoint debug status register */ + u32 bpdmr; /* Breakpoint debug mask register */ + u32 bprmrr0; /* Breakpoint request mode risc register 0 */ + u32 bprmrr1; /* Breakpoint request mode risc register 1 */ + u8 res0[0x8]; + u32 bprmtr0; /* Breakpoint request mode trb register 0 */ + u32 bprmtr1; /* Breakpoint request mode trb register 1 */ + u8 res1[0x8]; + u32 bprmir; /* Breakpoint request mode immediate register */ + u32 bprmsr; /* Breakpoint request mode serial register */ + u32 bpemr; /* Breakpoint exit mode register */ + u8 res2[0x48]; +} dbg83xx_t; + +/* +* RISC Special Registers (Trap and Breakpoint) +*/ + +typedef struct rsp83xx { + u8 fixme[0x100]; +} rsp83xx_t; +#endif typedef struct immap { - sysconf8349_t sysconf; /* System configuration */ - wdt8349_t wdt; /* Watch Dog Timer (WDT) Registers */ - rtclk8349_t rtc; /* Real Time Clock Module Registers */ - rtclk8349_t pit; /* Periodic Interval Timer */ - gtm8349_t gtm[2]; /* Global Timers Module */ - ipic8349_t ipic; /* Integrated Programmable Interrupt Controller */ - arbiter8349_t arbiter; /* System Arbiter Registers */ - reset8349_t reset; /* Reset Module */ - clk8349_t clk; /* System Clock Module */ - pmc8349_t pmc; /* Power Management Control Module */ - gpio8349_t pgio[2]; /* general purpose I/O module */ + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ +#if defined (CONFIG_MPC8349) + gpio83xx_t pgio[2]; /* general purpose I/O module */ +#elif defined (CONFIG_MPC8360) + qepi83xx_t qepi; /* QE Ports Interrupts Registers */ +#endif u8 res0[0x200]; +#if defined (CONFIG_MPC8360) + u8 DLL_LBDDR[0x100]; +#endif u8 DDL_DDR[0x100]; u8 DDL_LBIU[0x100]; +#if defined (CONFIG_MPC8349) u8 res1[0xE00]; - ddr8349_t ddr; /* DDR Memory Controller Memory */ - i2c_t i2c[2]; /* I2C1 Controller */ +#elif defined (CONFIG_MPC8360) + u8 res1[0x200]; + gpio83xx_t gpio; /* General purpose I/O module */ + qesba83xx_t qesba; /* QE Secondary Bus Access Windows */ +#endif + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ u8 res2[0x1300]; - duart8349_t duart[2];/* DUART */ + duart83xx_t duart[2]; /* DUART */ +#if defined (CONFIG_MPC8349) u8 res3[0x900]; - lbus8349_t lbus; /* Local Bus Controller Registers */ + lbus83xx_t lbus; /* Local Bus Controller Registers */ u8 res4[0x1000]; - spi8349_t spi; /* Serial Peripheral Interface */ + spi83xx_t spi; /* Serial Peripheral Interface */ u8 res5[0xF00]; - dma8349_t dma; /* DMA */ - pciconf8349_t pci_conf[2]; /* PCI Software Configuration Registers */ - ios8349_t ios; /* Sequencer */ - pcictrl8349_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ +#elif defined (CONFIG_MPC8360) + u8 res3[0x900]; + lbus83xx_t lbus; /* Local Bus Controller */ + u8 res4[0x2000]; +#endif + dma83xx_t dma; /* DMA */ +#if defined (CONFIG_MPC8349) + pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */ + ios83xx_t ios; /* Sequencer */ + pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ u8 res6[0x19900]; - usb8349_t usb; - tsec8349_t tsec[2]; + usb83xx_t usb; + tsec83xx_t tsec[2]; u8 res7[0xA000]; - security8349_t security; + security83xx_t security; +#elif defined (CONFIG_MPC8360) + pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ + u8 res_5[128]; + ios83xx_t ios; /* Sequencer (IOS) */ + pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ + u8 res6[0x4A00]; + ddr83xx_t ddr_secondary; /* Secondary DDR Memory Controller Memory Map */ + u8 res7[0x22000]; + security83xx_t security; + u8 res8[0xC0000]; + iram83xx_t iram; /* IRAM */ + irq83xx_t irq; /* Interrupt Controller */ + cp83xx_t cp; /* Communications Processor */ + qmx83xx_t qmx; /* QE Multiplexer */ + qet83xx_t qet; /* QE Timers */ + spi83xx_t spi[0x2]; /* spi */ + mcc83xx_t mcc; /* mcc */ + brg83xx_t brg; /* brg */ + usb83xx_t usb; /* USB */ + si1_83xx_t si1; /* SI */ + u8 res9[0x800]; + sir83xx_t sir; /* SI Routing Tables */ + ucc83xx_t ucc1; /* ucc1 */ + ucc83xx_t ucc3; /* ucc3 */ + ucc83xx_t ucc5; /* ucc5 */ + ucc83xx_t ucc7; /* ucc7 */ + u8 res10[0x600]; + upc83xx_t upc1; /* MultiPHY UTOPIA POS Controller 1 */ + ucc83xx_t ucc2; /* ucc2 */ + ucc83xx_t ucc4; /* ucc4 */ + ucc83xx_t ucc6; /* ucc6 */ + ucc83xx_t ucc8; /* ucc8 */ + u8 res11[0x600]; + upc83xx_t upc2; /* MultiPHY UTOPIA POS Controller 2 */ + sdma83xx_t sdma; /* SDMA */ + dbg83xx_t dbg; /* Debug Space */ + rsp83xx_t rsp[0x2]; /* RISC Special Registers (Trap and Breakpoint) */ + u8 res12[0x300]; + u8 res13[0x3A00]; + u8 res14[0x8000]; /* 0x108000 - 0x110000 */ + u8 res15[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ + u8 res16[0x24000]; /* 0x11C000 - 0x140000 */ + u8 res17[0xC0000]; /* 0x140000 - 0x200000 */ +#endif } immap_t; -#endif /* __IMMAP_8349__ */ +#endif /* __IMMAP_83xx__ */ diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h new file mode 100644 index 0000000..f385032 --- /dev/null +++ b/include/asm-ppc/immap_qe.h @@ -0,0 +1,550 @@ +/* + * QUICC Engine (QE) Internal Memory Map. + * The Internal Memory Map for devices with QE on them. This + * is the superset of all QE devices (8360, etc.). + * + * Copyright (c) 2006 Freescale Semiconductor, Inc. + * Author: Shlomi Gridih <gridish@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __IMMAP_QE_H__ +#define __IMMAP_QE_H__ + +/* QE I-RAM +*/ +typedef struct qe_iram { + u32 iadd; /* I-RAM Address Register */ + u32 idata; /* I-RAM Data Register */ + u8 res0[0x78]; +} __attribute__ ((packed)) qe_iram_t; + +/* QE Interrupt Controller +*/ +typedef struct qe_ic { + u32 qicr; + u32 qivec; + u32 qripnr; + u32 qipnr; + u32 qipxcc; + u32 qipycc; + u32 qipwcc; + u32 qipzcc; + u32 qimr; + u32 qrimr; + u32 qicnr; + u8 res0[0x4]; + u32 qiprta; + u32 qiprtb; + u8 res1[0x4]; + u32 qricr; + u8 res2[0x20]; + u32 qhivec; + u8 res3[0x1C]; +} __attribute__ ((packed)) qe_ic_t; + +/* Communications Processor +*/ +typedef struct cp_qe { + u32 cecr; /* QE command register */ + u32 ceccr; /* QE controller configuration register */ + u32 cecdr; /* QE command data register */ + u8 res0[0xA]; + u16 ceter; /* QE timer event register */ + u8 res1[0x2]; + u16 cetmr; /* QE timers mask register */ + u32 cetscr; /* QE time-stamp timer control register */ + u32 cetsr1; /* QE time-stamp register 1 */ + u32 cetsr2; /* QE time-stamp register 2 */ + u8 res2[0x8]; + u32 cevter; /* QE virtual tasks event register */ + u32 cevtmr; /* QE virtual tasks mask register */ + u16 cercr; /* QE RAM control register */ + u8 res3[0x2]; + u8 res4[0x24]; + u16 ceexe1; /* QE external request 1 event register */ + u8 res5[0x2]; + u16 ceexm1; /* QE external request 1 mask register */ + u8 res6[0x2]; + u16 ceexe2; /* QE external request 2 event register */ + u8 res7[0x2]; + u16 ceexm2; /* QE external request 2 mask register */ + u8 res8[0x2]; + u16 ceexe3; /* QE external request 3 event register */ + u8 res9[0x2]; + u16 ceexm3; /* QE external request 3 mask register */ + u8 res10[0x2]; + u16 ceexe4; /* QE external request 4 event register */ + u8 res11[0x2]; + u16 ceexm4; /* QE external request 4 mask register */ + u8 res12[0x2]; + u8 res13[0x280]; +} __attribute__ ((packed)) cp_qe_t; + +/* QE Multiplexer +*/ +typedef struct qe_mux { + u32 cmxgcr; /* CMX general clock route register */ + u32 cmxsi1cr_l; /* CMX SI1 clock route low register */ + u32 cmxsi1cr_h; /* CMX SI1 clock route high register */ + u32 cmxsi1syr; /* CMX SI1 SYNC route register */ + u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */ + u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */ + u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */ + u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */ + u32 cmxupcr; /* CMX UPC clock route register */ + u8 res0[0x1C]; +} __attribute__ ((packed)) qe_mux_t; + +/* QE Timers +*/ +typedef struct qe_timers { + u8 gtcfr1; /* Timer 1 2 global configuration register */ + u8 res0[0x3]; + u8 gtcfr2; /* Timer 3 4 global configuration register */ + u8 res1[0xB]; + u16 gtmdr1; /* Timer 1 mode register */ + u16 gtmdr2; /* Timer 2 mode register */ + u16 gtrfr1; /* Timer 1 reference register */ + u16 gtrfr2; /* Timer 2 reference register */ + u16 gtcpr1; /* Timer 1 capture register */ + u16 gtcpr2; /* Timer 2 capture register */ + u16 gtcnr1; /* Timer 1 counter */ + u16 gtcnr2; /* Timer 2 counter */ + u16 gtmdr3; /* Timer 3 mode register */ + u16 gtmdr4; /* Timer 4 mode register */ + u16 gtrfr3; /* Timer 3 reference register */ + u16 gtrfr4; /* Timer 4 reference register */ + u16 gtcpr3; /* Timer 3 capture register */ + u16 gtcpr4; /* Timer 4 capture register */ + u16 gtcnr3; /* Timer 3 counter */ + u16 gtcnr4; /* Timer 4 counter */ + u16 gtevr1; /* Timer 1 event register */ + u16 gtevr2; /* Timer 2 event register */ + u16 gtevr3; /* Timer 3 event register */ + u16 gtevr4; /* Timer 4 event register */ + u16 gtps; /* Timer 1 prescale register */ + u8 res2[0x46]; +} __attribute__ ((packed)) qe_timers_t; + +/* BRG +*/ +typedef struct qe_brg { + u32 brgc1; /* BRG1 configuration register */ + u32 brgc2; /* BRG2 configuration register */ + u32 brgc3; /* BRG3 configuration register */ + u32 brgc4; /* BRG4 configuration register */ + u32 brgc5; /* BRG5 configuration register */ + u32 brgc6; /* BRG6 configuration register */ + u32 brgc7; /* BRG7 configuration register */ + u32 brgc8; /* BRG8 configuration register */ + u32 brgc9; /* BRG9 configuration register */ + u32 brgc10; /* BRG10 configuration register */ + u32 brgc11; /* BRG11 configuration register */ + u32 brgc12; /* BRG12 configuration register */ + u32 brgc13; /* BRG13 configuration register */ + u32 brgc14; /* BRG14 configuration register */ + u32 brgc15; /* BRG15 configuration register */ + u32 brgc16; /* BRG16 configuration register */ + u8 res0[0x40]; +} __attribute__ ((packed)) qe_brg_t; + +/* SPI +*/ +typedef struct spi { + u8 res0[0x20]; + u32 spmode; /* SPI mode register */ + u8 res1[0x2]; + u8 spie; /* SPI event register */ + u8 res2[0x1]; + u8 res3[0x2]; + u8 spim; /* SPI mask register */ + u8 res4[0x1]; + u8 res5[0x1]; + u8 spcom; /* SPI command register */ + u8 res6[0x2]; + u32 spitd; /* SPI transmit data register (cpu mode) */ + u32 spird; /* SPI receive data register (cpu mode) */ + u8 res7[0x8]; +} __attribute__ ((packed)) spi_t; + +/* SI +*/ +typedef struct si1 { + u16 siamr1; /* SI1 TDMA mode register */ + u16 sibmr1; /* SI1 TDMB mode register */ + u16 sicmr1; /* SI1 TDMC mode register */ + u16 sidmr1; /* SI1 TDMD mode register */ + u8 siglmr1_h; /* SI1 global mode register high */ + u8 res0[0x1]; + u8 sicmdr1_h; /* SI1 command register high */ + u8 res2[0x1]; + u8 sistr1_h; /* SI1 status register high */ + u8 res3[0x1]; + u16 sirsr1_h; /* SI1 RAM shadow address register high */ + u8 sitarc1; /* SI1 RAM counter Tx TDMA */ + u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ + u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ + u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ + u8 sirarc1; /* SI1 RAM counter Rx TDMA */ + u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ + u8 sircrc1; /* SI1 RAM counter Rx TDMC */ + u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ + u8 res4[0x8]; + u16 siemr1; /* SI1 TDME mode register 16 bits */ + u16 sifmr1; /* SI1 TDMF mode register 16 bits */ + u16 sigmr1; /* SI1 TDMG mode register 16 bits */ + u16 sihmr1; /* SI1 TDMH mode register 16 bits */ + u8 siglmg1_l; /* SI1 global mode register low 8 bits */ + u8 res5[0x1]; + u8 sicmdr1_l; /* SI1 command register low 8 bits */ + u8 res6[0x1]; + u8 sistr1_l; /* SI1 status register low 8 bits */ + u8 res7[0x1]; + u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */ + u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ + u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ + u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ + u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ + u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ + u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ + u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ + u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ + u8 res8[0x8]; + u32 siml1; /* SI1 multiframe limit register */ + u8 siedm1; /* SI1 extended diagnostic mode register */ + u8 res9[0xBB]; +} __attribute__ ((packed)) si1_t; + +/* SI Routing Tables +*/ +typedef struct sir { + u8 tx[0x400]; + u8 rx[0x400]; + u8 res0[0x800]; +} __attribute__ ((packed)) sir_t; + +/* USB Controller. +*/ +typedef struct usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + u16 usb_usep1; + u16 usb_usep2; + u16 usb_usep3; + u16 usb_usep4; + u8 res2[4]; + u16 usb_usber; + u8 res3[2]; + u16 usb_usbmr; + u8 res4[1]; + u8 usb_usbs; + u16 usb_ussft; + u8 res5[2]; + u16 usb_usfrn; + u8 res6[0x22]; +} __attribute__ ((packed)) usb_t; + +/* MCC +*/ +typedef struct mcc { + u32 mcce; /* MCC event register */ + u32 mccm; /* MCC mask register */ + u32 mccf; /* MCC configuration register */ + u32 merl; /* MCC emergency request level register */ + u8 res0[0xF0]; +} __attribute__ ((packed)) mcc_t; + +/* QE UCC Slow +*/ +typedef struct ucc_slow { + u32 gumr_l; /* UCCx general mode register (low) */ + u32 gumr_h; /* UCCx general mode register (high) */ + u16 upsmr; /* UCCx protocol-specific mode register */ + u8 res0[0x2]; + u16 utodr; /* UCCx transmit on demand register */ + u16 udsr; /* UCCx data synchronization register */ + u16 ucce; /* UCCx event register */ + u8 res1[0x2]; + u16 uccm; /* UCCx mask register */ + u8 res2[0x1]; + u8 uccs; /* UCCx status register */ + u8 res3[0x24]; + u16 utpt; + u8 guemr; /* UCC general extended mode register */ + u8 res4[0x200 - 0x091]; +} __attribute__ ((packed)) ucc_slow_t; + +typedef struct ucc_ethernet { + u32 maccfg1; /* mac configuration reg. 1 */ + u32 maccfg2; /* mac configuration reg. 2 */ + u32 ipgifg; /* interframe gap reg. */ + u32 hafdup; /* half-duplex reg. */ + u8 res1[0x10]; + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ + u32 ifctl; /* interface control reg */ + u32 ifstat; /* interface statux reg */ + u32 macstnaddr1; /* mac station address part 1 reg */ + u32 macstnaddr2; /* mac station address part 2 reg */ + u8 res2[0x8]; + u32 uempr; /* UCC Ethernet Mac parameter reg */ + u32 utbipar; /* UCC tbi address reg */ + u16 uescr; /* UCC Ethernet statistics control reg */ + u8 res3[0x180 - 0x15A]; + u32 tx64; /* Total number of frames (including bad + * frames) transmitted that were exactly + * of the minimal length (64 for un tagged, + * 68 for tagged, or with length exactly + * equal to the parameter MINLength */ + u32 tx127; /* Total number of frames (including bad + * frames) transmitted that were between + * MINLength (Including FCS length==4) + * and 127 octets */ + u32 tx255; /* Total number of frames (including bad + * frames) transmitted that were between + * 128 (Including FCS length==4) and 255 + * octets */ + u32 rx64; /* Total number of frames received including + * bad frames that were exactly of the + * mninimal length (64 bytes) */ + u32 rx127; /* Total number of frames (including bad + * frames) received that were between + * MINLength (Including FCS length==4) + * and 127 octets */ + u32 rx255; /* Total number of frames (including + * bad frames) received that were between + * 128 (Including FCS length==4) and 255 + * octets */ + u32 txok; /* Total number of octets residing in frames + * that where involved in succesfull + * transmission */ + u16 txcf; /* Total number of PAUSE control frames + * transmitted by this MAC */ + u8 res4[0x2]; + u32 tmca; /* Total number of frames that were transmitted + * succesfully with the group address bit set + * that are not broadcast frames */ + u32 tbca; /* Total number of frames transmitted + * succesfully that had destination address + * field equal to the broadcast address */ + u32 rxfok; /* Total number of frames received OK */ + u32 rxbok; /* Total number of octets received OK */ + u32 rbyt; /* Total number of octets received including + * octets in bad frames. Must be implemented + * in HW because it includes octets in frames + * that never even reach the UCC */ + u32 rmca; /* Total number of frames that were received + * succesfully with the group address bit set + * that are not broadcast frames */ + u32 rbca; /* Total number of frames received succesfully + * that had destination address equal to the + * broadcast address */ + u32 scar; /* Statistics carry register */ + u32 scam; /* Statistics caryy mask register */ + u8 res5[0x200 - 0x1c4]; +} __attribute__ ((packed)) uec_t; + +/* QE UCC Fast +*/ +typedef struct ucc_fast { + u32 gumr; /* UCCx general mode register */ + u32 upsmr; /* UCCx protocol-specific mode register */ + u16 utodr; /* UCCx transmit on demand register */ + u8 res0[0x2]; + u16 udsr; /* UCCx data synchronization register */ + u8 res1[0x2]; + u32 ucce; /* UCCx event register */ + u32 uccm; /* UCCx mask register. */ + u8 uccs; /* UCCx status register */ + u8 res2[0x7]; + u32 urfb; /* UCC receive FIFO base */ + u16 urfs; /* UCC receive FIFO size */ + u8 res3[0x2]; + u16 urfet; /* UCC receive FIFO emergency threshold */ + u16 urfset; /* UCC receive FIFO special emergency + * threshold */ + u32 utfb; /* UCC transmit FIFO base */ + u16 utfs; /* UCC transmit FIFO size */ + u8 res4[0x2]; + u16 utfet; /* UCC transmit FIFO emergency threshold */ + u8 res5[0x2]; + u16 utftt; /* UCC transmit FIFO transmit threshold */ + u8 res6[0x2]; + u16 utpt; /* UCC transmit polling timer */ + u8 res7[0x2]; + u32 urtry; /* UCC retry counter register */ + u8 res8[0x4C]; + u8 guemr; /* UCC general extended mode register */ + u8 res9[0x100 - 0x091]; + uec_t ucc_eth; +} __attribute__ ((packed)) ucc_fast_t; + +/* QE UCC +*/ +typedef struct ucc_common { + u8 res1[0x90]; + u8 guemr; + u8 res2[0x200 - 0x091]; +} __attribute__ ((packed)) ucc_common_t; + +typedef struct ucc { + union { + ucc_slow_t slow; + ucc_fast_t fast; + ucc_common_t common; + }; +} __attribute__ ((packed)) ucc_t; + +/* MultiPHY UTOPIA POS Controllers (UPC) +*/ +typedef struct upc { + u32 upgcr; /* UTOPIA/POS general configuration register */ + u32 uplpa; /* UTOPIA/POS last PHY address */ + u32 uphec; /* ATM HEC register */ + u32 upuc; /* UTOPIA/POS UCC configuration */ + u32 updc1; /* UTOPIA/POS device 1 configuration */ + u32 updc2; /* UTOPIA/POS device 2 configuration */ + u32 updc3; /* UTOPIA/POS device 3 configuration */ + u32 updc4; /* UTOPIA/POS device 4 configuration */ + u32 upstpa; /* UTOPIA/POS STPA threshold */ + u8 res0[0xC]; + u32 updrs1_h; /* UTOPIA/POS device 1 rate select */ + u32 updrs1_l; /* UTOPIA/POS device 1 rate select */ + u32 updrs2_h; /* UTOPIA/POS device 2 rate select */ + u32 updrs2_l; /* UTOPIA/POS device 2 rate select */ + u32 updrs3_h; /* UTOPIA/POS device 3 rate select */ + u32 updrs3_l; /* UTOPIA/POS device 3 rate select */ + u32 updrs4_h; /* UTOPIA/POS device 4 rate select */ + u32 updrs4_l; /* UTOPIA/POS device 4 rate select */ + u32 updrp1; /* UTOPIA/POS device 1 receive priority low */ + u32 updrp2; /* UTOPIA/POS device 2 receive priority low */ + u32 updrp3; /* UTOPIA/POS device 3 receive priority low */ + u32 updrp4; /* UTOPIA/POS device 4 receive priority low */ + u32 upde1; /* UTOPIA/POS device 1 event */ + u32 upde2; /* UTOPIA/POS device 2 event */ + u32 upde3; /* UTOPIA/POS device 3 event */ + u32 upde4; /* UTOPIA/POS device 4 event */ + u16 uprp1; + u16 uprp2; + u16 uprp3; + u16 uprp4; + u8 res1[0x8]; + u16 uptirr1_0; /* Device 1 transmit internal rate 0 */ + u16 uptirr1_1; /* Device 1 transmit internal rate 1 */ + u16 uptirr1_2; /* Device 1 transmit internal rate 2 */ + u16 uptirr1_3; /* Device 1 transmit internal rate 3 */ + u16 uptirr2_0; /* Device 2 transmit internal rate 0 */ + u16 uptirr2_1; /* Device 2 transmit internal rate 1 */ + u16 uptirr2_2; /* Device 2 transmit internal rate 2 */ + u16 uptirr2_3; /* Device 2 transmit internal rate 3 */ + u16 uptirr3_0; /* Device 3 transmit internal rate 0 */ + u16 uptirr3_1; /* Device 3 transmit internal rate 1 */ + u16 uptirr3_2; /* Device 3 transmit internal rate 2 */ + u16 uptirr3_3; /* Device 3 transmit internal rate 3 */ + u16 uptirr4_0; /* Device 4 transmit internal rate 0 */ + u16 uptirr4_1; /* Device 4 transmit internal rate 1 */ + u16 uptirr4_2; /* Device 4 transmit internal rate 2 */ + u16 uptirr4_3; /* Device 4 transmit internal rate 3 */ + u32 uper1; /* Device 1 port enable register */ + u32 uper2; /* Device 2 port enable register */ + u32 uper3; /* Device 3 port enable register */ + u32 uper4; /* Device 4 port enable register */ + u8 res2[0x150]; +} __attribute__ ((packed)) upc_t; + +/* SDMA +*/ +typedef struct sdma { + u32 sdsr; /* Serial DMA status register */ + u32 sdmr; /* Serial DMA mode register */ + u32 sdtr1; /* SDMA system bus threshold register */ + u32 sdtr2; /* SDMA secondary bus threshold register */ + u32 sdhy1; /* SDMA system bus hysteresis register */ + u32 sdhy2; /* SDMA secondary bus hysteresis register */ + u32 sdta1; /* SDMA system bus address register */ + u32 sdta2; /* SDMA secondary bus address register */ + u32 sdtm1; /* SDMA system bus MSNUM register */ + u32 sdtm2; /* SDMA secondary bus MSNUM register */ + u8 res0[0x10]; + u32 sdaqr; /* SDMA address bus qualify register */ + u32 sdaqmr; /* SDMA address bus qualify mask register */ + u8 res1[0x4]; + u32 sdwbcr; /* SDMA CAM entries base register */ + u8 res2[0x38]; +} __attribute__ ((packed)) sdma_t; + +/* Debug Space +*/ +typedef struct dbg { + u32 bpdcr; /* Breakpoint debug command register */ + u32 bpdsr; /* Breakpoint debug status register */ + u32 bpdmr; /* Breakpoint debug mask register */ + u32 bprmrr0; /* Breakpoint request mode risc register 0 */ + u32 bprmrr1; /* Breakpoint request mode risc register 1 */ + u8 res0[0x8]; + u32 bprmtr0; /* Breakpoint request mode trb register 0 */ + u32 bprmtr1; /* Breakpoint request mode trb register 1 */ + u8 res1[0x8]; + u32 bprmir; /* Breakpoint request mode immediate register */ + u32 bprmsr; /* Breakpoint request mode serial register */ + u32 bpemr; /* Breakpoint exit mode register */ + u8 res2[0x48]; +} __attribute__ ((packed)) dbg_t; + +/* RISC Special Registers (Trap and Breakpoint) +*/ +typedef struct rsp { + u8 fixme[0x100]; +} __attribute__ ((packed)) rsp_t; + +typedef struct qe_immap { + qe_iram_t iram; /* I-RAM */ + qe_ic_t ic; /* Interrupt Controller */ + cp_qe_t cp; /* Communications Processor */ + qe_mux_t qmx; /* QE Multiplexer */ + qe_timers_t qet; /* QE Timers */ + spi_t spi[0x2]; /* spi */ + mcc_t mcc; /* mcc */ + qe_brg_t brg; /* brg */ + usb_t usb; /* USB */ + si1_t si1; /* SI */ + u8 res11[0x800]; + sir_t sir; /* SI Routing Tables */ + ucc_t ucc1; /* ucc1 */ + ucc_t ucc3; /* ucc3 */ + ucc_t ucc5; /* ucc5 */ + ucc_t ucc7; /* ucc7 */ + u8 res12[0x600]; + upc_t upc1; /* MultiPHY UTOPIA POS Controller 1 */ + ucc_t ucc2; /* ucc2 */ + ucc_t ucc4; /* ucc4 */ + ucc_t ucc6; /* ucc6 */ + ucc_t ucc8; /* ucc8 */ + u8 res13[0x600]; + upc_t upc2; /* MultiPHY UTOPIA POS Controller 2 */ + sdma_t sdma; /* SDMA */ + dbg_t dbg; /* Debug Space */ + rsp_t rsp[0x2]; /* RISC Special Registers + * (Trap and Breakpoint) */ + u8 res14[0x300]; + u8 res15[0x3A00]; + u8 res16[0x8000]; /* 0x108000 - 0x110000 */ + u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ + u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ + u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ +} __attribute__ ((packed)) qe_map_t; + +extern qe_map_t *qe_immr; + +#endif /* __IMMAP_QE_H__ */ diff --git a/include/common.h b/include/common.h index ac78d1c..982d6a8 100644 --- a/include/common.h +++ b/include/common.h @@ -402,6 +402,11 @@ void ppcSync(void); void ppcDcbz(unsigned long value); #endif +#if defined (CONFIG_MPC83XX) +void ppcDWload(unsigned int *addr, unsigned int *ret); +void ppcDWstore(unsigned int *addr, unsigned int *value); +#endif + /* $(CPU)/cpu.c */ int checkcpu (void); int checkicache (void); diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 66f1646..5bed2d0 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -36,6 +36,7 @@ */ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC83XX 1 /* MPC83XX family */ +#define CONFIG_MPC834X 1 /* MPC834X family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ @@ -59,9 +60,20 @@ #endif #endif +#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK)) +#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */ +#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */ +#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */ +#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */ +#define CFG_SCCR_VAL ( CFG_SCCR_INIT \ + | CFG_SCCR_TSEC1CM \ + | CFG_SCCR_TSEC2CM \ + | CFG_SCCR_ENCCM \ + | CFG_SCCR_USBCM ) + #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ -#define CFG_IMMRBAR 0xE0000000 +#define CFG_IMMR 0xE0000000 #undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00000000 /* memtest region */ @@ -299,8 +311,8 @@ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CFG_NS16550_COM1 (CFG_IMMRBAR+0x4500) -#define CFG_NS16550_COM2 (CFG_IMMRBAR+0x4600) +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) /* Use the HUSH parser */ #define CFG_HUSH_PARSER @@ -308,20 +320,35 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8349@0" +#define OF_SOC "soc8349@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" + /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 /* TSEC */ #define CFG_TSEC1_OFFSET 0x24000 -#define CFG_TSEC1 (CFG_IMMRBAR+CFG_TSEC1_OFFSET) +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) #define CFG_TSEC2_OFFSET 0x25000 -#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET) +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) /* USB */ #define CFG_USE_MPC834XSYS_USB_PHY 1 /* Use SYS board PHY */ @@ -615,8 +642,8 @@ #endif /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ -#define CFG_IBAT5L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_IBAT5U (CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ #define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) @@ -666,11 +693,11 @@ #define CONFIG_ETH1ADDR 00:E0:0C:00:7E:21 #endif -#define CONFIG_IPADDR 192.168.205.5 +#define CONFIG_IPADDR 192.168.1.253 #define CONFIG_HOSTNAME mpc8349emds -#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx -#define CONFIG_BOOTFILE /tftpboot/tqm83xx/uImage +#define CONFIG_ROOTPATH /nfsroot/rootfs +#define CONFIG_BOOTFILE uImage #define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 @@ -703,14 +730,31 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/mpc8349emds/uImage\0" \ "load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0" \ "update=protect off fe000000 fe03ffff; " \ "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0" \ "upd=run load;run update\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8349emds.dtb\0" \ "" +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + #define CONFIG_BOOTCOMMAND "run flash_self" #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h new file mode 100644 index 0000000..8dc9635 --- /dev/null +++ b/include/configs/MPC8349ITX.h @@ -0,0 +1,804 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + MPC8349E-mITX board configuration file + + Memory map: + + 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB) + 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB) + 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB) + 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) + 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) + 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) + 0xF000_0000-0xF000_FFFF Compact Flash + 0xF001_0000-0xF001_FFFF Local bus expansion slot + 0xF800_0000-0xF801_FFFF GBE L2 Switch VSC7385 + 0xFF00_0000-0xFF7F_FFFF Alternative bank of Flash memory (8MB) + 0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB) + + I2C address list: + Align. Board + Bus Addr Part No. Description Length Location + ---------------------------------------------------------------- + I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 + + I2C1 0x20 PCF8574 I2C Expander 0 U8 + I2C1 0x21 PCF8574 I2C Expander 0 U10 + I2C1 0x38 PCF8574A I2C Expander 0 U8 + I2C1 0x39 PCF8574A I2C Expander 0 U10 + I2C1 0x51 (DDR) DDR EEPROM 1 U1 + I2C1 0x68 DS1339 RTC 1 U68 + + Note that a given board has *either* a pair of 8574s or a pair of 8574As. +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_MPC834X /* MPC834x family (8343, 8347, 8349) */ +#define CONFIG_MPC8349 /* MPC8349 specific */ + +#define CONFIG_PCI + +#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ +#define CONFIG_RTC_DS1337 + +/* I2C */ +#define CONFIG_HARD_I2C + +#ifdef CONFIG_HARD_I2C + +#define CONFIG_MISC_INIT_F +#define CONFIG_MISC_INIT_R + +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 +#define CFG_SPD_BUS_NUM 1 /* The I2C bus for SPD */ + +#define CFG_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ +#define CFG_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ +#define CFG_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ +#define CFG_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ +#define CFG_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ +#define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ + +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* Don't probe these addresses: */ +#define CFG_I2C_NOPROBES {{1, CFG_I2C_8574_ADDR1}, \ + {1, CFG_I2C_8574_ADDR2}, \ + {1, CFG_I2C_8574A_ADDR1}, \ + {1, CFG_I2C_8574A_ADDR2}} +/* Bit definitions for the 8574[A] I2C expander */ +#define I2C_8574_REVISION 0x03 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ +#define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ +#define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ +#define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ +#define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ + +#undef CONFIG_SOFT_I2C + +#endif + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE + +#define PCI_66M +#ifdef PCI_66M +#define CONFIG_83XX_CLKIN 66666666 /* in Hz */ +#else +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#ifdef PCI_66M +#define CONFIG_SYS_CLK_FREQ 66666666 +#else +#define CONFIG_SYS_CLK_FREQ 33333333 +#endif +#endif + +#define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00003000 /* memtest region */ +#define CFG_MEMTEST_END 0x07100000 /* only has 128M */ + +/* + * DDR Setup + */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ +#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ + +/* + * 32-bit data path mode. + * + * Please note that using this mode for devices with the real density of 64-bit + * effectively reduces the amount of available memory due to the effect of + * wrapping around while translating address to row/columns, for example in the + * 256MB module the upper 128MB get aliased with contents of the lower + * 128MB); normally this define should be used for devices with real 32-bit + * data path. + */ +#undef CONFIG_DDR_32BIT + +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#undef CONFIG_DDR_2T_TIMING +#define CFG_83XX_DDR_USES_CS0 + +#ifndef CONFIG_SPD_EEPROM +/* + * Manually set up DDR parameters + */ + #define CFG_DDR_SIZE 256 /* Mb */ + #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) + + #define CFG_DDR_TIMING_1 0x26242321 + #define CFG_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ +#endif + +/* FLASH on the Local Bus */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 16 /* FLASH size in MB */ +#define CFG_FLASH_EMPTY_INFO + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V) +#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ + OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16Mb window bytes */ + +/* VSC7385 on the Local Bus */ +#define CFG_VSC7385_BASE 0xF8000000 /* start of VSC7385 */ + +#define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V) +#define CFG_OR1_PRELIM (0xFFFE0000 /* 128KB */ | \ + OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_SETA | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) + +#define CFG_LBLAWBAR1_PRELIM CFG_VSC7385_BASE /* Access window base at VSC7385 base */ +#define CFG_LBLAWAR1_PRELIM 0x80000010 /* Access window size 128K */ + +#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ +#define CFG_MAX_FLASH_SECT 135 /* sectors per device */ + +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000} + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CFG_LED_BASE 0xF9000000 /* start of LED and Board ID */ +#define CFG_BR2_PRELIM (CFG_LED_BASE | BR_PS_8 | BR_V) +#define CFG_OR2_PRELIM (0xFFE00000 /* 2MB */ | \ + OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | \ + OR_GPCM_SCY_9 | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) + +#ifdef CONFIG_COMPACT_FLASH + +#define CFG_CF_BASE 0xF0000000 + +#define CFG_BR3_PRELIM (CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V) +#define CFG_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) + +#define CFG_LBLAWBAR2_PRELIM CFG_CF_BASE /* Window base at flash base + LED & Board ID */ +#define CFG_LBLAWAR2_PRELIM 0x8000000F /* 64K bytes */ + +#undef CONFIG_IDE_RESET +#undef CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 1 + +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CFG_ATA_BASE_ADDR CFG_CF_BASE +#define CFG_ATA_DATA_OFFSET 0x0000 +#define CFG_ATA_REG_OFFSET 0 +#define CFG_ATA_ALT_OFFSET 0x0200 +#define CFG_ATA_STRIDE 2 + +#define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */ + +#endif + +#define CONFIG_DOS_PARTITION + +#define CFG_MID_FLASH_JUMP 0x7F000000 +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Local Bus LCRR and LBCR regs + * LCRR: DLL bypass, Clock divider is 4 + * External Local Bus rate is + * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CFG_LBC_LBCR 0x00000000 + +#undef CFG_LB_SDRAM /* if board has SRDAM on local bus */ + +#ifdef CFG_LB_SDRAM +/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port-size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 + */ + +#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#define CFG_LBLAWBAR2_PRELIM 0xF0000000 +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64M */ + +#define CFG_BR2_PRELIM (CFG_LBC_SDRAM_BASE | BR_PS_32 | BR_MS_SDRAM | BR_V) +#define CFG_OR2_PRELIM (0xFC000000 /* 64 MB */ | \ + OR_SDRAM_XAM | \ + ((9 - 7) << OR_SDRAM_COLS_SHIFT) | \ + ((13 - 9) << OR_SDRAM_ROWS_SHIFT) | \ + OR_SDRAM_EAD) + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1)) +#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10)) +#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10)) +#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16)) +#define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16)) +#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16)) +#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) +#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22)) +#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) +#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) +#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23)) +#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27)) +#define CFG_LBC_LSDMR_WRC3 (3 << (31 - 27)) +#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27)) +#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29)) +#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31)) + +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \ + | CFG_LBC_LSDMR_BSMA1516 \ + | CFG_LBC_LSDMR_RFCR8 \ + | CFG_LBC_LSDMR_PRETOACT6 \ + | CFG_LBC_LSDMR_ACTTORW3 \ + | CFG_LBC_LSDMR_BL8 \ + | CFG_LBC_LSDMR_WRC3 \ + | CFG_LBC_LSDMR_CL3 \ + ) + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) +#endif + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8349@0" +#define OF_SOC "soc8349@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" + +#ifdef CONFIG_PCI + +#define CONFIG_MPC83XX_PCI2 + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE) +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */ + +#ifdef CONFIG_MPC83XX_PCI2 +#define CFG_PCI2_MEM_BASE (CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE) +#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_MMIO_BASE (CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE) +#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE +#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_IO_BASE 0x00000000 +#define CFG_PCI2_IO_PHYS (CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE) +#define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */ +#endif + +#define _IO_BASE 0x00000000 /* points to PCI I/O space */ + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#ifdef CONFIG_RTL8139 +/* This macro is used by RTL8139 but not defined in PPC architecture */ +#define KSEG1ADDR(x) (x) +#endif + +#ifndef CONFIG_PCI_PNP + #define PCI_ENET0_IOADDR 0x00000000 + #define PCI_ENET0_MEMADDR CFG_PCI2_MEM_BASE + #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */ +#endif + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#endif + +/* TSEC */ + +#ifdef CONFIG_TSEC_ENET + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI +#endif + +#define CONFIG_MII +#define CONFIG_PHY_GIGE /* In case CFG_CMD_MII is specified */ + +#define CONFIG_MPC83XX_TSEC1 + +#ifdef CONFIG_MPC83XX_TSEC1 +#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" +#define CFG_TSEC1_OFFSET 0x24000 +#define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ +#define TSEC1_PHYIDX 0 +#endif + +#ifdef CONFIG_MPC83XX_TSEC2 +#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CFG_TSEC2_OFFSET 0x25000 +#define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ +#define TSEC2_PHY_ADDR 4 +#define TSEC2_PHYIDX 0 +#endif + +#define CONFIG_ETHPRIME "Freescale TSEC" + +#endif + + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* CONFIG_COMMANDS */ + +#ifdef CONFIG_COMPACT_FLASH +#define CONFIG_COMMANDS_CF (CFG_CMD_IDE | CFG_CMD_FAT) +#else +#define CONFIG_COMMANDS_CF 0 +#endif + +#ifdef CONFIG_PCI +#define CONFIG_COMMANDS_PCI CFG_CMD_PCI +#else +#define CONFIG_COMMANDS_PCI 0 +#endif + +#ifdef CONFIG_HARD_I2C +#define CONFIG_COMMANDS_I2C CFG_CMD_I2C +#else +#define CONFIG_COMMANDS_I2C 0 +#endif + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CONFIG_COMMANDS_CF | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CONFIG_COMMANDS_I2C | \ + CONFIG_COMMANDS_PCI | \ + CFG_CMD_SDRAM | \ + CFG_CMD_DATE | \ + CFG_CMD_CACHE | \ + CFG_CMD_IRQ) +#include <cmd_confdefs.h> + +/* Watchdog */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ +#ifdef CONFIG_WATCHDOG +#define CFG_WATCHDOG_VALUE 0xFFFFFFC3 +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log2 of the above value */ +#endif + +#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN_4X1 |\ + HRCWL_VCO_1X2 |\ + HRCWL_CORE_TO_CSB_2X1) + +#ifdef PCI_64BIT +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_64_BIT_PCI |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCI2_ARBITER_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_TSEC1M_IN_GMII |\ + HRCWH_TSEC2M_IN_GMII ) +#else +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_32_BIT_PCI |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCI2_ARBITER_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_TSEC1M_IN_GMII |\ + HRCWH_TSEC2M_IN_GMII ) +#endif + +/* System performance */ +#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ +#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ +#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ +#define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ +#define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count */ + +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ +#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1) + +#define CFG_HID0_INIT 0x000000000 + +#define CFG_HID0_FINAL CFG_HID0_INIT + +#define CFG_HID2 HID2_HBE + +/* DDR @ 0x00000000 */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#ifdef CONFIG_PCI +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT1L 0 +#define CFG_IBAT1U 0 +#define CFG_IBAT2L 0 +#define CFG_IBAT2U 0 +#endif + +#ifdef CONFIG_MPC83XX_PCI2 +#define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT3L 0 +#define CFG_IBAT3U 0 +#define CFG_IBAT4L 0 +#define CFG_IBAT4U 0 +#endif + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT7L 0 +#define CFG_IBAT7U 0 + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_MPC83XX_TSEC1 +#define CONFIG_ETHADDR 00:E0:0C:00:8C:01 +#endif + +#ifdef CONFIG_MPC83XX_TSEC2 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 +#endif + +#if 1 +#define CONFIG_IPADDR 10.82.19.159 +#define CONFIG_SERVERIP 10.82.48.106 +#define CONFIG_GATEWAYIP 10.82.19.254 +#define CONFIG_NETMASK 255.255.252.0 +#define CONFIG_NETDEV eth0 + +#define CONFIG_HOSTNAME mpc8349emitx +#define CONFIG_ROOTPATH /nfsroot0/u/timur/itx-ltib/rootfs +#define CONFIG_BOOTFILE timur/uImage + +#define CONFIG_UBOOTPATH timur/u-boot.bin +#else +#define CONFIG_IPADDR 192.168.1.253 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.252.0 +#define CONFIG_NETDEV eth0 + +#define CONFIG_HOSTNAME mpc8349emitx +#define CONFIG_ROOTPATH /nfsroot/rootfs +#define CONFIG_BOOTFILE uImage + +#define CONFIG_UBOOTPATH u-boot.bin +#endif + +#define CONFIG_UBOOTSTART fe700000 +#define CONFIG_UBOOTEND fe77ffff + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BAUDRATE 115200 + +#undef CONFIG_BOOTCOMMAND +#ifdef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTDELAY 6 +#else +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#endif + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_BOOTARGS \ + "root=/dev/nfs rw" \ + " nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \ + " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \ + MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \ + MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \ + " console=ttyS0," MK_STR(CONFIG_BAUDRATE) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \ + "erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ + "cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \ + "cmp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize\0" \ + "tftpupdate=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \ + "protect off FEF00000 FEF7FFFF; " \ + "erase FEF00000 FEF7FFFF; " \ + "cp.b $loadaddr FEF00000 $filesize; " \ + "protect on FEF00000 FEF7FFFF; " \ + "cmp.b $loadaddr FEF00000 $filesize\0" \ + "tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \ + "copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ + "cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8349emitx.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + + +#undef MK_STR +#undef XMK_STR + +#endif diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h new file mode 100644 index 0000000..2ff5f48 --- /dev/null +++ b/include/configs/MPC8360EMDS.h @@ -0,0 +1,635 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu <daveliu@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_QE 1 /* Has QE */ +#define CONFIG_MPC83XX 1 /* MPC83XX family */ +#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ +#define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ + +/* + * System Clock Setup + */ +#ifdef CONFIG_PCISLAVE +#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ +#else +#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ 66000000 +#endif + +/* + * Hardware Reset Configuration Word + */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN_4X1 |\ + HRCWL_VCO_1X2 |\ + HRCWL_CE_PLL_VCO_DIV_4 |\ + HRCWL_CE_PLL_DIV_1X1 |\ + HRCWL_CE_TO_PLL_1X6 |\ + HRCWL_CORE_TO_CSB_2X1) + +#ifdef CONFIG_PCISLAVE +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_AGENT |\ + HRCWH_PCI1_ARBITER_DISABLE |\ + HRCWH_PCICKDRV_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT) +#else +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCICKDRV_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT) +#endif + +/* + * System IO Config + */ +#define CFG_SICRH 0x00000000 +#define CFG_SICRL 0x40000000 + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +/* + * IMMR new address + */ +#define CFG_IMMR 0xE0000000 + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE + +#define CFG_83XX_DDR_USES_CS0 + +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ + +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#if defined(CONFIG_SPD_EEPROM) +/* + * Determine DDR configuration from I2C interface. + */ +#define SPD_EEPROM_ADDRESS 0x52 /* DDR SODIMM */ +#else +/* + * Manually set up DDR parameters + */ +#define CFG_DDR_SIZE 256 /* MB */ +#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9) +#define CFG_DDR_TIMING_1 0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */ +#define CFG_DDR_TIMING_2 0x00000800 /* may need tuning */ +#define CFG_DDR_CONTROL 0x42008000 /* Self refresh,2T timing */ +#define CFG_DDR_MODE 0x20000162 /* DLL,normal,seq,4/2.5 */ +#define CFG_DDR_INTERVAL 0x045b0100 /* page mode */ +#endif + +/* + * Memory test + */ +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00000000 /* memtest region */ +#define CFG_MEMTEST_END 0x00100000 + +/* + * The reserved memory + */ + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CFG_LBC_LBCR 0x00000000 + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */ + +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM + +/* + * BCSR on the Local Bus + */ +#define CFG_BCSR 0xF8000000 +#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ + +#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */ +#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ + +/* + * SDRAM on the Local Bus + */ +#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#define CFG_LB_SDRAM /* if board has SRDAM on local bus */ + +#ifdef CFG_LB_SDRAM +#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ + +/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 + * + * CFG_LBC_SDRAM_BASE should be masked and OR'ed into + * the top 17 bits of BR2. + */ + +#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */ + +/* + * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. + * + * For OR2, need: + * 64MB mask for AM, OR2[0:7] = 1111 1100 + * XAM, OR2[17:18] = 11 + * 9 columns OR2[19-21] = 010 + * 13 rows OR2[23-25] = 100 + * EAD set for extra time OR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 + */ + +#define CFG_OR2_PRELIM 0xfc006901 + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON 0x0063b723 + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) + +#endif + +/* + * Windows to access PIB via local bus + */ +#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */ +#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ + +/* + * CS4 on Local Bus, to PIB + */ +#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */ +#define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ + +/* + * CS5 on Local Bus, to PIB + */ +#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */ +#define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8360@0" +#define OF_SOC "soc8360@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8360@e0000000/serial@4500" + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x52} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +/* + * Config on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI_MEM_BASE 0x80000000 +#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE +#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI_MMIO_BASE 0x90000000 +#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE +#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI_IO_BASE 0xE0300000 +#define CFG_PCI_IO_PHYS 0xE0300000 +#define CFG_PCI_IO_SIZE 0x100000 /* 1M */ + +#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE +#define CFG_PCI_SLV_MEM_BUS 0x00000000 +#define CFG_PCI_SLV_MEM_SIZE 0x80000000 + + +#ifdef CONFIG_PCI + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + +#endif /* CONFIG_PCI */ + + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#define CONFIG_ETHPRIME "Freescale GETH" +#define CONFIG_PHY_MODE_NEED_CHANGE + +#define CONFIG_UEC_ETH1 /* GETH1 */ + +#ifdef CONFIG_UEC_ETH1 +#define CFG_UEC1_UCC_NUM 0 /* UCC1 */ +#define CFG_UEC1_RX_CLK QE_CLK_NONE +#define CFG_UEC1_TX_CLK QE_CLK9 +#define CFG_UEC1_ETH_TYPE GIGA_ETH +#define CFG_UEC1_PHY_ADDR 0 +#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII +#endif + +#define CONFIG_UEC_ETH2 /* GETH2 */ + +#ifdef CONFIG_UEC_ETH2 +#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ +#define CFG_UEC2_RX_CLK QE_CLK_NONE +#define CFG_UEC2_TX_CLK QE_CLK4 +#define CFG_UEC2_ETH_TYPE GIGA_ETH +#define CFG_UEC2_PHY_ADDR 1 +#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII +#endif + +/* + * Environment + */ + +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_PCI \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#else +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#endif +#else +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PCI \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C) +#else +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C ) +#endif +#endif + +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Cache Config + */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ +#endif + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +/* IMMRBAR & PCI IO: cache-inhibit and guarded */ +#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* BCSR: cache-inhibit and guarded */ +#define CFG_IBAT2L (CFG_BCSR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CFG_IBAT3L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT3U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_DBAT3L (CFG_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U CFG_IBAT3U + +/* Local bus SDRAM: cacheable */ +#define CFG_IBAT4L (CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT4U (CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP) +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10) +#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U + +#ifdef CONFIG_PCI +/* PCI MEM space: cacheable */ +#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +/* PCI MMIO space: cache-inhibit and guarded */ +#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#else +#define CFG_IBAT6L (0) +#define CFG_IBAT6U (0) +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_UEC_ETH) +#define CONFIG_ETHADDR 00:04:9f:ef:01:01 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:04:9f:ef:01:02 +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=ramfs.83xx\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8349emds.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + + +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 4bbee97..728083b 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -37,10 +37,11 @@ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC834X 1 /* MPC834X specific */ +#define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_TQM834X 1 /* TQM834X board specific */ /* IMMR Base Addres Register, use Freescale default: 0xff400000 */ -#define CFG_IMMRBAR 0xff400000 +#define CFG_IMMR 0xff400000 /* System clock. Primary input clock when in PCI host mode */ #define CONFIG_83XX_CLKIN 66666000 /* 66,666 MHz */ @@ -56,6 +57,17 @@ */ #define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) +#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK)) +#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */ +#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */ +#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */ +#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */ +#define CFG_SCCR_VAL ( CFG_SCCR_INIT \ + | CFG_SCCR_TSEC1CM \ + | CFG_SCCR_TSEC2CM \ + | CFG_SCCR_ENCCM \ + | CFG_SCCR_USBCM ) + /* board pre init: do not call, nothing to do */ #undef CONFIG_BOARD_EARLY_INIT_F @@ -83,6 +95,7 @@ #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_BASE 0x80000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 8 /* FLASH size in MB */ /* buffered writes in the AMD chip set is not supported yet */ #undef CFG_FLASH_USE_BUFFER_WRITE @@ -197,14 +210,15 @@ extern int tqm834x_num_flash_banks; #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CFG_NS16550_COM1 (CFG_IMMRBAR + 0x4500) -#define CFG_NS16550_COM2 (CFG_IMMRBAR + 0x4600) +#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) /* * I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C #define CFG_I2C_SPEED 400000 /* I2C speed: 400KHz */ #define CFG_I2C_SLAVE 0x7F /* slave address */ #define CFG_I2C_OFFSET 0x3000 @@ -235,9 +249,9 @@ extern int tqm834x_num_flash_banks; #define CONFIG_MII #define CFG_TSEC1_OFFSET 0x24000 -#define CFG_TSEC1 (CFG_IMMRBAR + CFG_TSEC1_OFFSET) +#define CFG_TSEC1 (CFG_IMMR + CFG_TSEC1_OFFSET) #define CFG_TSEC2_OFFSET 0x25000 -#define CFG_TSEC2 (CFG_IMMRBAR + CFG_TSEC2_OFFSET) +#define CFG_TSEC2 (CFG_IMMR + CFG_TSEC2_OFFSET) #if defined(CONFIG_TSEC_ENET) @@ -460,8 +474,8 @@ extern int tqm834x_num_flash_banks; #endif /* IMMRBAR */ -#define CFG_IBAT6L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_IBAT6U (CFG_IMMRBAR | BATU_BL_1M | BATU_VS | BATU_VP) +#define CFG_IBAT6L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT6U (CFG_IMMR | BATU_BL_1M | BATU_VS | BATU_VP) /* FLASH */ #define CFG_IBAT7L (CFG_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) diff --git a/include/i2c.h b/include/i2c.h index 6d39080..a8f729a 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -82,4 +82,49 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len); uchar i2c_reg_read (uchar chip, uchar reg); void i2c_reg_write(uchar chip, uchar reg, uchar val); +/* + * Functions for setting the current I2C bus and its speed + */ + +/* + * i2c_set_bus_num: + * + * Change the active I2C bus. Subsequent read/write calls will + * go to this one. + * + * bus - bus index, zero based + * + * Returns: 0 on success, not 0 on failure + * + */ +int i2c_set_bus_num(unsigned int bus); + +/* + * i2c_get_bus_num: + * + * Returns index of currently active I2C bus. Zero-based. + */ + +unsigned int i2c_get_bus_num(void); + +/* + * i2c_set_bus_speed: + * + * Change the speed of the active I2C bus + * + * speed - bus speed in Hz + * + * Returns: 0 on success, not 0 on failure + * + */ +int i2c_set_bus_speed(unsigned int); + +/* + * i2c_get_bus_speed: + * + * Returns speed of currently active I2C bus in Hz + */ + +unsigned int i2c_get_bus_speed(void); + #endif /* _I2C_H_ */ diff --git a/include/ioports.h b/include/ioports.h index d7e19e1..91ca6fb 100644 --- a/include/ioports.h +++ b/include/ioports.h @@ -53,3 +53,14 @@ typedef struct { * like the table in the 8260UM (and in the hymod manuals). */ extern const iop_conf_t iop_conf_tab[4][32]; + +typedef struct { + unsigned char port; + unsigned char pin; + int dir; + int open_drain; + int assign; +} qe_iop_conf_t; + +#define QE_IOP_TAB_END (-1) + diff --git a/include/mpc83xx.h b/include/mpc83xx.h index ea40bad3..03dd0ca 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -8,16 +8,6 @@ * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA */ /* @@ -29,6 +19,7 @@ #ifndef __MPC83XX_H__ #define __MPC83XX_H__ +#include <config.h> #if defined(CONFIG_E300) #include <asm/e300.h> #endif @@ -85,6 +76,33 @@ #define LBLAWBAR3 0x0038 #define LBLAWAR3 0x003C +/* + * The device ID and revision numbers + */ +#define SPR_8349E_REV10 0x80300100 +#define SPR_8349_REV10 0x80310100 +#define SPR_8347E_REV10_TBGA 0x80320100 +#define SPR_8347_REV10_TBGA 0x80330100 +#define SPR_8347E_REV10_PBGA 0x80340100 +#define SPR_8347_REV10_PBGA 0x80350100 +#define SPR_8343E_REV10 0x80360100 +#define SPR_8343_REV10 0x80370100 + +#define SPR_8349E_REV11 0x80300101 +#define SPR_8349_REV11 0x80310101 +#define SPR_8347E_REV11_TBGA 0x80320101 +#define SPR_8347_REV11_TBGA 0x80330101 +#define SPR_8347E_REV11_PBGA 0x80340101 +#define SPR_8347_REV11_PBGA 0x80350101 +#define SPR_8343E_REV11 0x80360101 +#define SPR_8343_REV11 0x80370101 + +#define SPR_8360E_REV10 0x80480010 +#define SPR_8360_REV10 0x80490010 +#define SPR_8360E_REV11 0x80480011 +#define SPR_8360_REV11 0x80490011 +#define SPR_8360E_REV12 0x80480012 +#define SPR_8360_REV12 0x80490012 /* * Base Registers & Option Registers @@ -116,9 +134,17 @@ #define BR_MS_UPMA 0x00000080 /* UPMA */ #define BR_MS_UPMB 0x000000A0 /* UPMB */ #define BR_MS_UPMC 0x000000C0 /* UPMC */ +#if defined (CONFIG_MPC8360) +#define BR_ATOM 0x0000000C +#define BR_ATOM_SHIFT 2 +#endif #define BR_V 0x00000001 #define BR_V_SHIFT 0 +#if defined (CONFIG_MPC8349) #define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) +#elif defined (CONFIG_MPC8360) +#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_ATOM|BR_V) +#endif #define OR0 0x5004 #define OR1 0x500C @@ -201,14 +227,21 @@ #define HRCWH_PCI_AGENT 0x00000000 #define HRCWH_PCI_HOST 0x80000000 +#if defined (CONFIG_MPC8349) #define HRCWH_32_BIT_PCI 0x00000000 #define HRCWH_64_BIT_PCI 0x40000000 +#endif #define HRCWH_PCI1_ARBITER_DISABLE 0x00000000 #define HRCWH_PCI1_ARBITER_ENABLE 0x20000000 +#if defined (CONFIG_MPC8349) #define HRCWH_PCI2_ARBITER_DISABLE 0x00000000 #define HRCWH_PCI2_ARBITER_ENABLE 0x10000000 +#elif defined (CONFIG_MPC8360) +#define HRCWH_PCICKDRV_DISABLE 0x00000000 +#define HRCWH_PCICKDRV_ENABLE 0x10000000 +#endif #define HRCWH_CORE_DISABLE 0x08000000 #define HRCWH_CORE_ENABLE 0x00000000 @@ -225,11 +258,14 @@ #define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000 #define HRCWH_ROM_LOC_PCI1 0x00100000 +#if defined (CONFIG_MPC8349) #define HRCWH_ROM_LOC_PCI2 0x00200000 +#endif #define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000 #define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 #define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 +#if defined (CONFIG_MPC8349) #define HRCWH_TSEC1M_IN_RGMII 0x00000000 #define HRCWH_TSEC1M_IN_RTBI 0x00004000 #define HRCWH_TSEC1M_IN_GMII 0x00008000 @@ -239,10 +275,22 @@ #define HRCWH_TSEC2M_IN_RTBI 0x00001000 #define HRCWH_TSEC2M_IN_GMII 0x00002000 #define HRCWH_TSEC2M_IN_TBI 0x00003000 +#endif + +#if defined (CONFIG_MPC8360) +#define HRCWH_SECONDARY_DDR_DISABLE 0x00000000 +#define HRCWH_SECONDARY_DDR_ENABLE 0x00000010 +#endif #define HRCWH_BIG_ENDIAN 0x00000000 #define HRCWH_LITTLE_ENDIAN 0x00000008 +#define HRCWH_LALE_NORMAL 0x00000000 +#define HRCWH_LALE_EARLY 0x00000004 + +#define HRCWH_LDP_SET 0x00000000 +#define HRCWH_LDP_CLEAR 0x00000002 + /* * Hard Reset Configration Word - Low */ @@ -281,6 +329,47 @@ #define HRCWL_CORE_TO_CSB_2_5X1 0x00050000 #define HRCWL_CORE_TO_CSB_3X1 0x00060000 +#if defined (CONFIG_MPC8360) +#define HRCWL_CE_PLL_VCO_DIV_4 0x00000000 +#define HRCWL_CE_PLL_VCO_DIV_8 0x00000040 +#define HRCWL_CE_PLL_VCO_DIV_2 0x00000080 + +#define HRCWL_CE_PLL_DIV_1X1 0x00000000 +#define HRCWL_CE_PLL_DIV_2X1 0x00000020 + +#define HRCWL_CE_TO_PLL_1X16_ 0x00000000 +#define HRCWL_CE_TO_PLL_1X2 0x00000002 +#define HRCWL_CE_TO_PLL_1X3 0x00000003 +#define HRCWL_CE_TO_PLL_1X4 0x00000004 +#define HRCWL_CE_TO_PLL_1X5 0x00000005 +#define HRCWL_CE_TO_PLL_1X6 0x00000006 +#define HRCWL_CE_TO_PLL_1X7 0x00000007 +#define HRCWL_CE_TO_PLL_1X8 0x00000008 +#define HRCWL_CE_TO_PLL_1X9 0x00000009 +#define HRCWL_CE_TO_PLL_1X10 0x0000000A +#define HRCWL_CE_TO_PLL_1X11 0x0000000B +#define HRCWL_CE_TO_PLL_1X12 0x0000000C +#define HRCWL_CE_TO_PLL_1X13 0x0000000D +#define HRCWL_CE_TO_PLL_1X14 0x0000000E +#define HRCWL_CE_TO_PLL_1X15 0x0000000F +#define HRCWL_CE_TO_PLL_1X16 0x00000010 +#define HRCWL_CE_TO_PLL_1X17 0x00000011 +#define HRCWL_CE_TO_PLL_1X18 0x00000012 +#define HRCWL_CE_TO_PLL_1X19 0x00000013 +#define HRCWL_CE_TO_PLL_1X20 0x00000014 +#define HRCWL_CE_TO_PLL_1X21 0x00000015 +#define HRCWL_CE_TO_PLL_1X22 0x00000016 +#define HRCWL_CE_TO_PLL_1X23 0x00000017 +#define HRCWL_CE_TO_PLL_1X24 0x00000018 +#define HRCWL_CE_TO_PLL_1X25 0x00000019 +#define HRCWL_CE_TO_PLL_1X26 0x0000001A +#define HRCWL_CE_TO_PLL_1X27 0x0000001B +#define HRCWL_CE_TO_PLL_1X28 0x0000001C +#define HRCWL_CE_TO_PLL_1X29 0x0000001D +#define HRCWL_CE_TO_PLL_1X30 0x0000001E +#define HRCWL_CE_TO_PLL_1X31 0x0000001F +#endif + /* * LCRR - Clock Ratio Register (10.3.1.16) */ @@ -310,4 +399,31 @@ #define LCRR_CLKDIV_8 0x00000008 #define LCRR_CLKDIV_SHIFT 0 +/* + * SCCR-System Clock Control Register + */ +#define SCCR_TSEC1CM_0 0x00000000 +#define SCCR_TSEC1CM_1 0x40000000 +#define SCCR_TSEC1CM_2 0x80000000 +#define SCCR_TSEC1CM_3 0xC0000000 +#define SCCR_TSEC2CM_0 0x00000000 +#define SCCR_TSEC2CM_1 0x10000000 +#define SCCR_TSEC2CM_2 0x20000000 +#define SCCR_TSEC2CM_3 0x30000000 +#define SCCR_ENCCM_0 0x00000000 +#define SCCR_ENCCM_1 0x01000000 +#define SCCR_ENCCM_2 0x02000000 +#define SCCR_ENCCM_3 0x03000000 +#define SCCR_USBCM_0 0x00000000 +#define SCCR_USBCM_1 0x00500000 +#define SCCR_USBCM_2 0x00A00000 +#define SCCR_USBCM_3 0x00F00000 + +#define SCCR_CLK_MASK ( SCCR_TSEC1CM_3 \ + | SCCR_TSEC2CM_3 \ + | SCCR_ENCCM_3 \ + | SCCR_USBCM_3 ) + +#define SCCR_DEFAULT 0xFFFFFFFF + #endif /* __MPC83XX_H__ */ |