diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/ahci.h | 190 | ||||
| -rw-r--r-- | include/configs/MPC8641HPCN.h | 31 |
2 files changed, 216 insertions, 5 deletions
diff --git a/include/ahci.h b/include/ahci.h new file mode 100644 index 0000000..80701e2 --- /dev/null +++ b/include/ahci.h @@ -0,0 +1,190 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * Author: Jason Jin<Jason.jin@freescale.com> + * Zhang Wei<wei.zhang@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#ifndef _AHCI_H_ +#define _AHCI_H_ + +#define AHCI_PCI_BAR 0x24 +#define AHCI_MAX_SG 56 /* hardware max is 64K */ +#define AHCI_CMD_SLOT_SZ 32 +#define AHCI_RX_FIS_SZ 256 +#define AHCI_CMD_TBL_HDR 0x80 +#define AHCI_CMD_TBL_CDB 0x40 +#define AHCI_CMD_TBL_SZ AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16) +#define AHCI_PORT_PRIV_DMA_SZ AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ \ + + AHCI_RX_FIS_SZ +#define AHCI_CMD_ATAPI (1 << 5) +#define AHCI_CMD_WRITE (1 << 6) +#define AHCI_CMD_PREFETCH (1 << 7) +#define AHCI_CMD_RESET (1 << 8) +#define AHCI_CMD_CLR_BUSY (1 << 10) + +#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */ + +/* Global controller registers */ +#define HOST_CAP 0x00 /* host capabilities */ +#define HOST_CTL 0x04 /* global host control */ +#define HOST_IRQ_STAT 0x08 /* interrupt status */ +#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */ +#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */ + +/* HOST_CTL bits */ +#define HOST_RESET (1 << 0) /* reset controller; self-clear */ +#define HOST_IRQ_EN (1 << 1) /* global IRQ enable */ +#define HOST_AHCI_EN (1 << 31) /* AHCI enabled */ + +/* Registers for each SATA port */ +#define PORT_LST_ADDR 0x00 /* command list DMA addr */ +#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */ +#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */ +#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */ +#define PORT_IRQ_STAT 0x10 /* interrupt status */ +#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */ +#define PORT_CMD 0x18 /* port command */ +#define PORT_TFDATA 0x20 /* taskfile data */ +#define PORT_SIG 0x24 /* device TF signature */ +#define PORT_CMD_ISSUE 0x38 /* command issue */ +#define PORT_SCR 0x28 /* SATA phy register block */ +#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */ +#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */ +#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */ +#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */ + +/* PORT_IRQ_{STAT,MASK} bits */ +#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */ +#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */ +#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */ +#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */ +#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */ +#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */ +#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */ +#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */ + +#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */ +#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */ +#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */ +#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */ +#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */ +#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */ +#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */ +#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */ +#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */ + +#define PORT_IRQ_FATAL PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_ERR \ + | PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_ERR + +#define DEF_PORT_IRQ PORT_IRQ_FATAL | PORT_IRQ_PHYRDY \ + | PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE \ + | PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS \ + | PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS \ + | PORT_IRQ_D2H_REG_FIS + +/* PORT_CMD bits */ +#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */ +#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */ +#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */ +#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */ +#define PORT_CMD_CLO (1 << 3) /* Command list override */ +#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */ +#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */ +#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */ + +#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */ +#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */ +#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */ + +#define AHCI_MAX_PORTS 32 + +/* SETFEATURES stuff */ +#define SETFEATURES_XFER 0x03 +#define XFER_UDMA_7 0x47 +#define XFER_UDMA_6 0x46 +#define XFER_UDMA_5 0x45 +#define XFER_UDMA_4 0x44 +#define XFER_UDMA_3 0x43 +#define XFER_UDMA_2 0x42 +#define XFER_UDMA_1 0x41 +#define XFER_UDMA_0 0x40 +#define XFER_MW_DMA_2 0x22 +#define XFER_MW_DMA_1 0x21 +#define XFER_MW_DMA_0 0x20 +#define XFER_SW_DMA_2 0x12 +#define XFER_SW_DMA_1 0x11 +#define XFER_SW_DMA_0 0x10 +#define XFER_PIO_4 0x0C +#define XFER_PIO_3 0x0B +#define XFER_PIO_2 0x0A +#define XFER_PIO_1 0x09 +#define XFER_PIO_0 0x08 +#define XFER_PIO_SLOW 0x00 + +#define ATA_FLAG_SATA (1 << 3) +#define ATA_FLAG_NO_LEGACY (1 << 4) /* no legacy mode check */ +#define ATA_FLAG_MMIO (1 << 6) /* use MMIO, not PIO */ +#define ATA_FLAG_SATA_RESET (1 << 7) /* (obsolete) use COMRESET */ +#define ATA_FLAG_PIO_DMA (1 << 8) /* PIO cmds via DMA */ +#define ATA_FLAG_NO_ATAPI (1 << 11) /* No ATAPI support */ + +struct ahci_cmd_hdr { + u32 opts; + u32 status; + u32 tbl_addr; + u32 tbl_addr_hi; + u32 reserved[4]; +}; + +struct ahci_sg { + u32 addr; + u32 addr_hi; + u32 reserved; + u32 flags_size; +}; + +struct ahci_ioports { + u32 cmd_addr; + u32 scr_addr; + u32 port_mmio; + struct ahci_cmd_hdr *cmd_slot; + struct ahci_sg *cmd_tbl_sg; + u32 cmd_tbl; + u32 rx_fis; +}; + +struct ahci_probe_ent { + pci_dev_t dev; + struct ahci_ioports port[AHCI_MAX_PORTS]; + u32 n_ports; + u32 hard_port_no; + u32 host_flags; + u32 host_set_flags; + u32 mmio_base; + u32 pio_mask; + u32 udma_mask; + u32 flags; + u32 cap; /* cache of HOST_CAP register */ + u32 port_map; /* cache of HOST_PORTS_IMPL reg */ + u32 link_port_map; /*linkup port map*/ +}; + +#endif diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 200a38f..7097b3e 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -340,6 +340,17 @@ #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#define CONFIG_SCSI_AHCI + +#ifdef CONFIG_SCSI_AHCI +#define CONFIG_SATA_ULI5288 +#define CFG_SCSI_MAX_SCSI_ID 4 +#define CFG_SCSI_MAX_LUN 1 +#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) +#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE +#endif + #endif /* CONFIG_PCI */ @@ -477,7 +488,9 @@ #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ | CFG_CMD_PING \ | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ + | CFG_CMD_I2C \ + | CFG_CMD_SCSI \ + | CFG_CMD_EXT2) \ & \ ~(CFG_CMD_ENV \ | CFG_CMD_IMLS \ @@ -486,7 +499,9 @@ #else #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ | CFG_CMD_PING \ - | CFG_CMD_I2C) \ + | CFG_CMD_I2C \ + | CFG_CMD_SCSI \ + | CGF_CMD_EXT2) \ & \ ~(CFG_CMD_ENV \ | CFG_CMD_IMLS \ @@ -498,7 +513,9 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_PCI \ | CFG_CMD_PING \ - | CFG_CMD_I2C) + | CFG_CMD_I2C \ + | CFG_CMD_SCSI \ + | CFG_CMD_EXT2) #else #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_PING \ @@ -595,6 +612,8 @@ "consoledev=ttyS0\0" \ "ramdiskaddr=400000\0" \ "ramdiskfile=your.ramdisk.u-boot\0" \ + "dtbaddr=2000000\0" \ + "dtbfile=mpc8641_hpcn.dtb\0" \ "pex0=echo ---------------------------; echo --------- PCI EXPRESS -----\0"\ "pexstat=mw f8008000 84000004; echo -expect:- 16000000; md f8008004 1\0" \ "pex1=pci write 1.0.0 4 146; pci write 1.0.0 10 80000000\0" \ @@ -611,14 +630,16 @@ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr" + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr $ramdiskaddr" + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr $ramdiskaddr $dtbaddr" #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND |