diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/AT91RM9200.h | 349 | ||||
| -rw-r--r-- | include/asm-ppc/u-boot.h | 4 | ||||
| -rw-r--r-- | include/cmd_confdefs.h | 2 | ||||
| -rw-r--r-- | include/cmd_nand.h | 55 | ||||
| -rw-r--r-- | include/commproc.h | 51 | ||||
| -rw-r--r-- | include/configs/at91rm9200dk.h | 153 | ||||
| -rw-r--r-- | include/configs/dnp1110.h | 12 | ||||
| -rw-r--r-- | include/configs/svm_sc8xx.h | 470 | ||||
| -rw-r--r-- | include/flash.h | 3 | ||||
| -rw-r--r-- | include/linux/mtd/nand.h | 115 | ||||
| -rw-r--r-- | include/pcmcia.h | 2 | ||||
| -rw-r--r-- | include/status_led.h | 14 |
12 files changed, 1220 insertions, 10 deletions
diff --git a/include/AT91RM9200.h b/include/AT91RM9200.h new file mode 100644 index 0000000..f65328f --- /dev/null +++ b/include/AT91RM9200.h @@ -0,0 +1,349 @@ +/* ---------------------------------------------------------------------------- */ +/* ATMEL Microcontroller Software Support - ROUSSET - */ +/* ---------------------------------------------------------------------------- */ +/* The software is delivered "AS IS" without warranty or condition of any */ +/* kind, either express, implied or statutory. This includes without */ +/* limitation any warranty or condition with respect to merchantability or */ +/* fitness for any particular purpose, or against the infringements of */ +/* intellectual property rights of others. */ +/* ---------------------------------------------------------------------------- */ +/* File Name : AT91RM9200.h */ +/* Object : AT91RM9200 definitions */ +/* Generated : AT91 SW Application Group 10/29/2002 (16:10:51) */ +#ifndef AT91RM9200_H +#define AT91RM9200_H + +typedef volatile unsigned int AT91_REG;/* Hardware register definition */ + +/* ***************************************************************************** */ +/* SOFTWARE API DEFINITION FOR Timer Counter Channel Interface */ +/* ***************************************************************************** */ +typedef struct _AT91S_TC { + AT91_REG TC_CCR; /* Channel Control Register */ + AT91_REG TC_CMR; /* Channel Mode Register */ + AT91_REG Reserved0[2]; /* */ + AT91_REG TC_CV; /* Counter Value */ + AT91_REG TC_RA; /* Register A */ + AT91_REG TC_RB; /* Register B */ + AT91_REG TC_RC; /* Register C */ + AT91_REG TC_SR; /* Status Register */ + AT91_REG TC_IER; /* Interrupt Enable Register */ + AT91_REG TC_IDR; /* Interrupt Disable Register */ + AT91_REG TC_IMR; /* Interrupt Mask Register */ +} AT91S_TC, *AT91PS_TC; + +/* ***************************************************************************** */ +/* SOFTWARE API DEFINITION FOR Usart */ +/* ***************************************************************************** */ +typedef struct _AT91S_USART { + AT91_REG US_CR; /* Control Register */ + AT91_REG US_MR; /* Mode Register */ + AT91_REG US_IER; /* Interrupt Enable Register */ + AT91_REG US_IDR; /* Interrupt Disable Register */ + AT91_REG US_IMR; /* Interrupt Mask Register */ + AT91_REG US_CSR; /* Channel Status Register */ + AT91_REG US_RHR; /* Receiver Holding Register */ + AT91_REG US_THR; /* Transmitter Holding Register */ + AT91_REG US_BRGR; /* Baud Rate Generator Register */ + AT91_REG US_RTOR; /* Receiver Time-out Register */ + AT91_REG US_TTGR; /* Transmitter Time-guard Register */ + AT91_REG Reserved0[5]; /* */ + AT91_REG US_FIDI; /* FI_DI_Ratio Register */ + AT91_REG US_NER; /* Nb Errors Register */ + AT91_REG US_XXR; /* XON_XOFF Register */ + AT91_REG US_IF; /* IRDA_FILTER Register */ + AT91_REG Reserved1[44]; /* */ + AT91_REG US_RPR; /* Receive Pointer Register */ + AT91_REG US_RCR; /* Receive Counter Register */ + AT91_REG US_TPR; /* Transmit Pointer Register */ + AT91_REG US_TCR; /* Transmit Counter Register */ + AT91_REG US_RNPR; /* Receive Next Pointer Register */ + AT91_REG US_RNCR; /* Receive Next Counter Register */ + AT91_REG US_TNPR; /* Transmit Next Pointer Register */ + AT91_REG US_TNCR; /* Transmit Next Counter Register */ + AT91_REG US_PTCR; /* PDC Transfer Control Register */ + AT91_REG US_PTSR; /* PDC Transfer Status Register */ +} AT91S_USART, *AT91PS_USART; + +/* ***************************************************************************** */ +/* SOFTWARE API DEFINITION FOR Parallel Input Output Controler */ +/* ***************************************************************************** */ +typedef struct _AT91S_PIO { + AT91_REG PIO_PER; /* PIO Enable Register */ + AT91_REG PIO_PDR; /* PIO Disable Register */ + AT91_REG PIO_PSR; /* PIO Status Register */ + AT91_REG Reserved0[1]; /* */ + AT91_REG PIO_OER; /* Output Enable Register */ + AT91_REG PIO_ODR; /* Output Disable Registerr */ + AT91_REG PIO_OSR; /* Output Status Register */ + AT91_REG Reserved1[1]; /* */ + AT91_REG PIO_IFER; /* Input Filter Enable Register */ + AT91_REG PIO_IFDR; /* Input Filter Disable Register */ + AT91_REG PIO_IFSR; /* Input Filter Status Register */ + AT91_REG Reserved2[1]; /* */ + AT91_REG PIO_SODR; /* Set Output Data Register */ + AT91_REG PIO_CODR; /* Clear Output Data Register */ + AT91_REG PIO_ODSR; /* Output Data Status Register */ + AT91_REG PIO_PDSR; /* Pin Data Status Register */ + AT91_REG PIO_IER; /* Interrupt Enable Register */ + AT91_REG PIO_IDR; /* Interrupt Disable Register */ + AT91_REG PIO_IMR; /* Interrupt Mask Register */ + AT91_REG PIO_ISR; /* Interrupt Status Register */ + AT91_REG PIO_MDER; /* Multi-driver Enable Register */ + AT91_REG PIO_MDDR; /* Multi-driver Disable Register */ + AT91_REG PIO_MDSR; /* Multi-driver Status Register */ + AT91_REG Reserved3[1]; /* */ + AT91_REG PIO_PPUDR; /* Pull-up Disable Register */ + AT91_REG PIO_PPUER; /* Pull-up Enable Register */ + AT91_REG PIO_PPUSR; /* Pad Pull-up Status Register */ + AT91_REG Reserved4[1]; /* */ + AT91_REG PIO_ASR; /* Select A Register */ + AT91_REG PIO_BSR; /* Select B Register */ + AT91_REG PIO_ABSR; /* AB Select Status Register */ + AT91_REG Reserved5[9]; /* */ + AT91_REG PIO_OWER; /* Output Write Enable Register */ + AT91_REG PIO_OWDR; /* Output Write Disable Register */ + AT91_REG PIO_OWSR; /* Output Write Status Register */ +} AT91S_PIO, *AT91PS_PIO; + + +/* ***************************************************************************** */ +/* SOFTWARE API DEFINITION FOR Debug Unit */ +/* ***************************************************************************** */ +typedef struct _AT91S_DBGU { + AT91_REG DBGU_CR; /* Control Register */ + AT91_REG DBGU_MR; /* Mode Register */ + AT91_REG DBGU_IER; /* Interrupt Enable Register */ + AT91_REG DBGU_IDR; /* Interrupt Disable Register */ + AT91_REG DBGU_IMR; /* Interrupt Mask Register */ + AT91_REG DBGU_CSR; /* Channel Status Register */ + AT91_REG DBGU_RHR; /* Receiver Holding Register */ + AT91_REG DBGU_THR; /* Transmitter Holding Register */ + AT91_REG DBGU_BRGR; /* Baud Rate Generator Register */ + AT91_REG Reserved0[7]; /* */ + AT91_REG DBGU_C1R; /* Chip ID1 Register */ + AT91_REG DBGU_C2R; /* Chip ID2 Register */ + AT91_REG DBGU_FNTR; /* Force NTRST Register */ + AT91_REG Reserved1[45]; /* */ + AT91_REG DBGU_RPR; /* Receive Pointer Register */ + AT91_REG DBGU_RCR; /* Receive Counter Register */ + AT91_REG DBGU_TPR; /* Transmit Pointer Register */ + AT91_REG DBGU_TCR; /* Transmit Counter Register */ + AT91_REG DBGU_RNPR; /* Receive Next Pointer Register */ + AT91_REG DBGU_RNCR; /* Receive Next Counter Register */ + AT91_REG DBGU_TNPR; /* Transmit Next Pointer Register */ + AT91_REG DBGU_TNCR; /* Transmit Next Counter Register */ + AT91_REG DBGU_PTCR; /* PDC Transfer Control Register */ + AT91_REG DBGU_PTSR; /* PDC Transfer Status Register */ +} AT91S_DBGU, *AT91PS_DBGU; + + +/* ***************************************************************************** */ +/* SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface */ +/* ***************************************************************************** */ +typedef struct _AT91S_SMC2 { + AT91_REG SMC2_CSR[8]; /* SMC2 Chip Select Register */ +} AT91S_SMC2, *AT91PS_SMC2; + +/* ***************************************************************************** */ +/* SOFTWARE API DEFINITION FOR Ethernet MAC */ +/* ***************************************************************************** */ +typedef struct _AT91S_EMAC { + AT91_REG EMAC_CTL; /* Network Control Register */ + AT91_REG EMAC_CFG; /* Network Configuration Register */ + AT91_REG EMAC_SR; /* Network Status Register */ + AT91_REG EMAC_TAR; /* Transmit Address Register */ + AT91_REG EMAC_TCR; /* Transmit Control Register */ + AT91_REG EMAC_TSR; /* Transmit Status Register */ + AT91_REG EMAC_RBQP; /* Receive Buffer Queue Pointer */ + AT91_REG Reserved0[1]; /* */ + AT91_REG EMAC_RSR; /* Receive Status Register */ + AT91_REG EMAC_ISR; /* Interrupt Status Register */ + AT91_REG EMAC_IER; /* Interrupt Enable Register */ + AT91_REG EMAC_IDR; /* Interrupt Disable Register */ + AT91_REG EMAC_IMR; /* Interrupt Mask Register */ + AT91_REG EMAC_MAN; /* PHY Maintenance Register */ + AT91_REG Reserved1[2]; /* */ + AT91_REG EMAC_FRA; /* Frames Transmitted OK Register */ + AT91_REG EMAC_SCOL; /* Single Collision Frame Register */ + AT91_REG EMAC_MCOL; /* Multiple Collision Frame Register */ + AT91_REG EMAC_OK; /* Frames Received OK Register */ + AT91_REG EMAC_SEQE; /* Frame Check Sequence Error Register */ + AT91_REG EMAC_ALE; /* Alignment Error Register */ + AT91_REG EMAC_DTE; /* Deferred Transmission Frame Register */ + AT91_REG EMAC_LCOL; /* Late Collision Register */ + AT91_REG EMAC_ECOL; /* Excessive Collision Register */ + AT91_REG EMAC_CSE; /* Carrier Sense Error Register */ + AT91_REG EMAC_TUE; /* Transmit Underrun Error Register */ + AT91_REG EMAC_CDE; /* Code Error Register */ + AT91_REG EMAC_ELR; /* Excessive Length Error Register */ + AT91_REG EMAC_RJB; /* Receive Jabber Register */ + AT91_REG EMAC_USF; /* Undersize Frame Register */ + AT91_REG EMAC_SQEE; /* SQE Test Error Register */ + AT91_REG EMAC_DRFC; /* Discarded RX Frame Register */ + AT91_REG Reserved2[3]; /* */ + AT91_REG EMAC_HSH; /* Hash Address High[63:32] */ + AT91_REG EMAC_HSL; /* Hash Address Low[31:0] */ + AT91_REG EMAC_SA1L; /* Specific Address 1 Low, First 4 bytes */ + AT91_REG EMAC_SA1H; /* Specific Address 1 High, Last 2 bytes */ + AT91_REG EMAC_SA2L; /* Specific Address 2 Low, First 4 bytes */ + AT91_REG EMAC_SA2H; /* Specific Address 2 High, Last 2 bytes */ + AT91_REG EMAC_SA3L; /* Specific Address 3 Low, First 4 bytes */ + AT91_REG EMAC_SA3H; /* Specific Address 3 High, Last 2 bytes */ + AT91_REG EMAC_SA4L; /* Specific Address 4 Low, First 4 bytes */ + AT91_REG EMAC_SA4H; /* Specific Address 4 High, Last 2 bytesr */ +} AT91S_EMAC, *AT91PS_EMAC; + +/* -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- */ +#define AT91C_US_RXRDY ((unsigned int) 0x1 << 0) /* (DBGU) RXRDY Interrupt */ +#define AT91C_US_TXRDY ((unsigned int) 0x1 << 1) /* (DBGU) TXRDY Interrupt */ +#define AT91C_US_ENDRX ((unsigned int) 0x1 << 3) /* (DBGU) End of Receive Transfer Interrupt */ +#define AT91C_US_ENDTX ((unsigned int) 0x1 << 4) /* (DBGU) End of Transmit Interrupt */ +#define AT91C_US_OVRE ((unsigned int) 0x1 << 5) /* (DBGU) Overrun Interrupt */ +#define AT91C_US_FRAME ((unsigned int) 0x1 << 6) /* (DBGU) Framing Error Interrupt */ +#define AT91C_US_PARE ((unsigned int) 0x1 << 7) /* (DBGU) Parity Error Interrupt */ +#define AT91C_US_TXEMPTY ((unsigned int) 0x1 << 9) /* (DBGU) TXEMPTY Interrupt */ +#define AT91C_US_TXBUFE ((unsigned int) 0x1 << 11) /* (DBGU) TXBUFE Interrupt */ +#define AT91C_US_RXBUFF ((unsigned int) 0x1 << 12) /* (DBGU) RXBUFF Interrupt */ +#define AT91C_US_COMM_TX ((unsigned int) 0x1 << 30) /* (DBGU) COMM_TX Interrupt */ +#define AT91C_US_COMM_RX ((unsigned int) 0x1 << 31) /* (DBGU) COMM_RX Interrupt */ + +/* -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- */ +#define AT91C_US_RSTRX ((unsigned int) 0x1 << 2) /* (DBGU) Reset Receiver */ +#define AT91C_US_RSTTX ((unsigned int) 0x1 << 3) /* (DBGU) Reset Transmitter */ +#define AT91C_US_RXEN ((unsigned int) 0x1 << 4) /* (DBGU) Receiver Enable */ +#define AT91C_US_RXDIS ((unsigned int) 0x1 << 5) /* (DBGU) Receiver Disable */ +#define AT91C_US_TXEN ((unsigned int) 0x1 << 6) /* (DBGU) Transmitter Enable */ +#define AT91C_US_TXDIS ((unsigned int) 0x1 << 7) /* (DBGU) Transmitter Disable */ + +#define AT91C_US_CLKS_CLOCK ((unsigned int) 0x0 << 4) /* (USART) Clock */ +#define AT91C_US_CHRL_8_BITS ((unsigned int) 0x3 << 6) /* (USART) Character Length: 8 bits */ +#define AT91C_US_PAR_NONE ((unsigned int) 0x4 << 9) /* (DBGU) No Parity */ +#define AT91C_US_NBSTOP_1_BIT ((unsigned int) 0x0 << 12) /* (USART) 1 stop bit */ + +#define AT91C_PMC_PCER ((AT91_REG *) 0xFFFFFC10) /* (PMC) Peripheral Clock Enable Register */ +#define AT91C_PIOA_PDR ((AT91_REG *) 0xFFFFF404) /* (PIOA) PIO Disable Register */ +#define AT91C_PIO_PA30 ((unsigned int) 1 << 30) /* Pin Controlled by PA30 */ +#define AT91C_PIO_PC0 ((unsigned int) 1 << 0) /* Pin Controlled by PC0 */ +#define AT91C_PC0_BFCK ((unsigned int) AT91C_PIO_PC0) /* Burst Flash Clock */ +#define AT91C_PA30_DRXD ((unsigned int) AT91C_PIO_PA30) /* DBGU Debug Receive Data */ +#define AT91C_PIO_PA31 ((unsigned int) 1 << 31) /* Pin Controlled by PA31 */ +#define AT91C_PA31_DTXD ((unsigned int) AT91C_PIO_PA31) /* DBGU Debug Transmit Data */ + +#define AT91C_ID_SYS ((unsigned int) 1) /* System Peripheral */ +#define AT91C_ID_TC0 ((unsigned int) 17) /* Timer Counter 0 */ +#define AT91C_ID_EMAC ((unsigned int) 24) /* Ethernet MAC */ + +#define AT91C_PIO_PC1 ((unsigned int) 1 << 1) /* Pin Controlled by PC1 */ +#define AT91C_PC1_BFRDY_SMOE ((unsigned int) AT91C_PIO_PC1) /* Burst Flash Ready */ +#define AT91C_PIO_PC3 ((unsigned int) 1 << 3) /* Pin Controlled by PC3 */ +#define AT91C_PC3_BFBAA_SMWE ((unsigned int) AT91C_PIO_PC3) /* Burst Flash Address Advance / SmartMedia Write Enable */ +#define AT91C_PIO_PC2 ((unsigned int) 1 << 2) /* Pin Controlled by PC2 */ +#define AT91C_PC2_BFAVD ((unsigned int) AT91C_PIO_PC2) /* Burst Flash Address Valid */ +#define AT91C_PIO_PB1 ((unsigned int) 1 << 1) /* Pin Controlled by PB1 */ + +#define AT91C_TC_TIMER_DIV1_CLOCK ((unsigned int) 0x0 << 0) /* (TC) MCK/2 */ +#define AT91C_TC_TIMER_DIV2_CLOCK ((unsigned int) 0x1 << 0) /* (TC) MCK/8 */ +#define AT91C_TC_TIMER_DIV3_CLOCK ((unsigned int) 0x2 << 0) /* (TC) MCK/32 */ +#define AT91C_TC_TIMER_DIV4_CLOCK ((unsigned int) 0x3 << 0) /* (TC) MCK/128 */ +#define AT91C_TC_SLOW_CLOCK ((unsigned int) 0x4 << 0) /* (TC) SLOW CLK */ +#define AT91C_TC_XC0_CLOCK ((unsigned int) 0x5 << 0) /* (TC) XC0 */ +#define AT91C_TC_XC1_CLOCK ((unsigned int) 0x6 << 0) /* (TC) XC1 */ +#define AT91C_TC_XC2_CLOCK ((unsigned int) 0x7 << 0) /* (TC) XC2 */ +#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) /* (TCB) None signal connected to XC0 */ +#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) /* (TCB) None signal connected to XC1 */ +#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) /* (TCB) None signal connected to XC2 */ +#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) /* (TC) Counter Clock Disable Command */ +#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) /* (TC) Software Trigger Command */ +#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) /* (TC) Counter Clock Enable Command */ + +#define AT91C_EMAC_BNQ ((unsigned int) 0x1 << 4) /* (EMAC) */ +#define AT91C_EMAC_COMP ((unsigned int) 0x1 << 5) /* (EMAC) */ +#define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) /* (EMAC) */ +#define AT91C_EMAC_RE ((unsigned int) 0x1 << 2) /* (EMAC) Receive enable. */ +#define AT91C_EMAC_TE ((unsigned int) 0x1 << 3) /* (EMAC) Transmit enable. */ +#define AT91C_EMAC_CLK ((unsigned int) 0x3 << 10) /* (EMAC) */ +#define AT91C_EMAC_RMII ((unsigned int) 0x1 << 13) /* (EMAC) */ +#define AT91C_EMAC_NBC ((unsigned int) 0x1 << 5) /* (EMAC) No broadcast. */ +#define AT91C_EMAC_CAF ((unsigned int) 0x1 << 4) /* (EMAC) Copy all frames. */ +#define AT91C_EMAC_BNA ((unsigned int) 0x1 << 0) /* (EMAC) */ +#define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) /* (EMAC) */ +#define AT91C_EMAC_RSR_OVR ((unsigned int) 0x1 << 2) /* (EMAC) */ +#define AT91C_EMAC_CSR ((unsigned int) 0x1 << 5) /* (EMAC) Clear statistics registers. */ +#define AT91C_EMAC_SPD ((unsigned int) 0x1 << 0) /* (EMAC) Speed. */ +#define AT91C_EMAC_FD ((unsigned int) 0x1 << 1) /* (EMAC) Full duplex. */ +#define AT91C_EMAC_LINK ((unsigned int) 0x1 << 0) /* (EMAC) */ +#define AT91C_EMAC_MPE ((unsigned int) 0x1 << 4) /* (EMAC) Management port enable. */ +#define AT91C_PIO_PA16 ((unsigned int) 1 << 16) /* Pin Controlled by PA16 */ +#define AT91C_PA16_EMDIO ((unsigned int) AT91C_PIO_PA16) /* Ethernet MAC Management Data Input/Output */ +#define AT91C_PIO_PA15 ((unsigned int) 1 << 15) /* Pin Controlled by PA15 */ +#define AT91C_PA15_EMDC ((unsigned int) AT91C_PIO_PA15) /* Ethernet MAC Management Data Clock */ +#define AT91C_PIO_PA14 ((unsigned int) 1 << 14) /* Pin Controlled by PA14 */ +#define AT91C_PA14_ERXER ((unsigned int) AT91C_PIO_PA14) /* Ethernet MAC Receive Error */ +#define AT91C_PIO_PA13 ((unsigned int) 1 << 13) /* Pin Controlled by PA13 */ +#define AT91C_PA13_ERX1 ((unsigned int) AT91C_PIO_PA13) /* Ethernet MAC Receive Data 1 */ +#define AT91C_PIO_PA12 ((unsigned int) 1 << 12) /* Pin Controlled by PA12 */ +#define AT91C_PA12_ERX0 ((unsigned int) AT91C_PIO_PA12) /* Ethernet MAC Receive Data 0 */ +#define AT91C_PIO_PA11 ((unsigned int) 1 << 11) /* Pin Controlled by PA11 */ +#define AT91C_PA11_ECRS_ECRSDV ((unsigned int) AT91C_PIO_PA11) /* Ethernet MAC Carrier Sense/Carrier Sense and Data Valid */ +#define AT91C_PIO_PA10 ((unsigned int) 1 << 10) /* Pin Controlled by PA10 */ +#define AT91C_PA10_ETX1 ((unsigned int) AT91C_PIO_PA10) /* Ethernet MAC Transmit Data 1 */ +#define AT91C_PIO_PA9 ((unsigned int) 1 << 9) /* Pin Controlled by PA9 */ +#define AT91C_PA9_ETX0 ((unsigned int) AT91C_PIO_PA9) /* Ethernet MAC Transmit Data 0 */ +#define AT91C_PIO_PA8 ((unsigned int) 1 << 8) /* Pin Controlled by PA8 */ +#define AT91C_PA8_ETXEN ((unsigned int) AT91C_PIO_PA8) /* Ethernet MAC Transmit Enable */ +#define AT91C_PIO_PA7 ((unsigned int) 1 << 7) /* Pin Controlled by PA7 */ +#define AT91C_PA7_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PA7) /* Ethernet MAC Transmit Clock/Reference Clock */ +#define AT91C_PIO_PB25 ((unsigned int) 1 << 25) /* Pin Controlled by PB25 */ +#define AT91C_PB25_DSR1 ((unsigned int) AT91C_PIO_PB25) /* USART 1 Data Set ready */ +#define AT91C_PB25_EF100 ((unsigned int) AT91C_PIO_PB25) /* Ethernet MAC Force 100 Mbits */ +#define AT91C_PIO_PB19 ((unsigned int) 1 << 19) /* Pin Controlled by PB19 */ +#define AT91C_PB19_DTR1 ((unsigned int) AT91C_PIO_PB19) /* USART 1 Data Terminal ready */ +#define AT91C_PB19_ERXCK ((unsigned int) AT91C_PIO_PB19) /* Ethernet MAC Receive Clock */ +#define AT91C_PIO_PB18 ((unsigned int) 1 << 18) /* Pin Controlled by PB18 */ +#define AT91C_PB18_RI1 ((unsigned int) AT91C_PIO_PB18) /* USART 1 Ring Indicator */ +#define AT91C_PB18_ECOL ((unsigned int) AT91C_PIO_PB18) /* Ethernet MAC Collision Detected */ +#define AT91C_PIO_PB17 ((unsigned int) 1 << 17) /* Pin Controlled by PB17 */ +#define AT91C_PB17_RF2 ((unsigned int) AT91C_PIO_PB17) /* SSC Receive Frame Sync 2 */ +#define AT91C_PB17_ERXDV ((unsigned int) AT91C_PIO_PB17) /* Ethernet MAC Receive Data Valid */ +#define AT91C_PIO_PB16 ((unsigned int) 1 << 16) /* Pin Controlled by PB16 */ +#define AT91C_PB16_RK2 ((unsigned int) AT91C_PIO_PB16) /* SSC Receive Clock 2 */ +#define AT91C_PB16_ERX3 ((unsigned int) AT91C_PIO_PB16) /* Ethernet MAC Receive Data 3 */ +#define AT91C_PIO_PB15 ((unsigned int) 1 << 15) /* Pin Controlled by PB15 */ +#define AT91C_PB15_RD2 ((unsigned int) AT91C_PIO_PB15) /* SSC Receive Data 2 */ +#define AT91C_PB15_ERX2 ((unsigned int) AT91C_PIO_PB15) /* Ethernet MAC Receive Data 2 */ +#define AT91C_PIO_PB14 ((unsigned int) 1 << 14) /* Pin Controlled by PB14 */ +#define AT91C_PB14_TD2 ((unsigned int) AT91C_PIO_PB14) /* SSC Transmit Data 2 */ +#define AT91C_PB14_ETXER ((unsigned int) AT91C_PIO_PB14) /* Ethernet MAC Transmikt Coding Error */ +#define AT91C_PIO_PB13 ((unsigned int) 1 << 13) /* Pin Controlled by PB13 */ +#define AT91C_PB13_TK2 ((unsigned int) AT91C_PIO_PB13) /* SSC Transmit Clock 2 */ +#define AT91C_PB13_ETX3 ((unsigned int) AT91C_PIO_PB13) /* Ethernet MAC Transmit Data 3 */ +#define AT91C_PIO_PB12 ((unsigned int) 1 << 12) /* Pin Controlled by PB12 */ +#define AT91C_PB12_TF2 ((unsigned int) AT91C_PIO_PB12) /* SSC Transmit Frame Sync 2 */ +#define AT91C_PB12_ETX2 ((unsigned int) AT91C_PIO_PB12) /* Ethernet MAC Transmit Data 2 */ + +#define AT91C_PIOB_BSR ((AT91_REG *) 0xFFFFF674) /* (PIOB) Select B Register */ +#define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) /* (EMAC) Base Address */ +#define AT91C_PIOB_PDR ((AT91_REG *) 0xFFFFF604) /* (PIOB) PIO Disable Register */ + +#define AT91C_EBI_CS3A_SMC_SmartMedia ((unsigned int) 0x1 << 3) /* (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. */ +#define AT91C_SMC2_ACSS_STANDARD ((unsigned int) 0x0 << 16) /* (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. */ +#define AT91C_SMC2_DBW_8 ((unsigned int) 0x2 << 13) /* (SMC2) 8-bit. */ +#define AT91C_SMC2_WSEN ((unsigned int) 0x1 << 7) /* (SMC2) Wait State Enable */ +#define AT91C_PIOC_ASR ((AT91_REG *) 0xFFFFF870) /* (PIOC) Select A Register */ + +#define AT91C_BASE_TC0 ((AT91PS_TC) 0xFFFA0000) /* (TC0) Base Address */ +#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) /* (DBGU) Base Address */ +#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF400) /* (PIOA) Base Address */ +#define AT91C_EBI_CSA ((AT91_REG *) 0xFFFFFF60) /* (EBI) Chip Select Assignment Register */ +#define AT91C_BASE_SMC2 ((AT91PS_SMC2) 0xFFFFFF70) /* (SMC2) Base Address */ +#define AT91C_BASE_US1 ((AT91PS_USART) 0xFFFC4000) /* (US1) Base Address */ +#define AT91C_TCB0_BMR ((AT91_REG *) 0xFFFA00C4) /* (TCB0) TC Block Mode Register */ +#define AT91C_TCB0_BCR ((AT91_REG *) 0xFFFA00C0) /* (TCB0) TC Block Control Register */ +#define AT91C_PIOC_PDR ((AT91_REG *) 0xFFFFF804) /* (PIOC) PIO Disable Register */ +#define AT91C_PIOC_PER ((AT91_REG *) 0xFFFFF800) /* (PIOC) PIO Enable Register */ +#define AT91C_PIOC_ODR ((AT91_REG *) 0xFFFFF814) /* (PIOC) Output Disable Registerr */ +#define AT91C_PIOB_PER ((AT91_REG *) 0xFFFFF600) /* (PIOB) PIO Enable Register */ +#define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) /* (PIOB) Output Disable Registerr */ +#define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) /* (PIOB) Pin Data Status Register */ +#endif diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h index eea9c7c..e417e0d 100644 --- a/include/asm-ppc/u-boot.h +++ b/include/asm-ppc/u-boot.h @@ -68,11 +68,11 @@ typedef struct bd_info { #if defined(CONFIG_HYMOD) hymod_conf_t bi_hymod_conf; /* hymod configuration information */ #endif -#if defined(CONFIG_EVB64260) || defined(CONFIG_PN62) +#if defined(CONFIG_EVB64260) || defined(CONFIG_PN62) || defined(CONFIG_SVM_SC8xx) /* second onboard ethernet port */ unsigned char bi_enet1addr[6]; #endif -#if defined(CONFIG_EVB64260) +#if defined(CONFIG_EVB64260) || defined(CONFIG_SVM_SC8xx) /* third onboard ethernet port */ unsigned char bi_enet2addr[6]; #endif diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h index c462c3f..4e7ab9b 100644 --- a/include/cmd_confdefs.h +++ b/include/cmd_confdefs.h @@ -78,6 +78,7 @@ #define CFG_CMD_SPI 0x0000100000000000 /* SPI utility */ #define CFG_CMD_FDOS 0x0000200000000000 /* Floppy DOS support */ #define CFG_CMD_VFD 0x0000400000000000 /* VFD support (TRAB) */ +#define CFG_CMD_NAND 0x0000800000000000 /* NAND support */ #define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFF /* ALL commands */ @@ -106,6 +107,7 @@ CFG_CMD_JFFS2 | \ CFG_CMD_KGDB | \ CFG_CMD_MII | \ + CFG_CMD_NAND | \ CFG_CMD_PCI | \ CFG_CMD_PCMCIA | \ CFG_CMD_REGINFO | \ diff --git a/include/cmd_nand.h b/include/cmd_nand.h new file mode 100644 index 0000000..febb27d --- /dev/null +++ b/include/cmd_nand.h @@ -0,0 +1,55 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * NAND support + */ +#ifndef _CMD_NAND_H +#define _CMD_NAND_H + +#include <common.h> +#include <command.h> + + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#define CMD_TBL_NAND MK_CMD_TBL_ENTRY( \ + "nand", 3, 5, 1, do_nand, \ + "nand - NAND sub-system\n", \ + "info - show available NAND devices\n" \ + "nand device [dev] - show or set current device\n" \ + "nand read addr off size\n" \ + "nand write addr off size - read/write `size'" \ + " bytes starting at offset `off'\n" \ + " to/from memory address `addr'\n" \ + "nand erase off size - erase `size' bytes of NAND from offset `off'\n" \ +), + +#define CMD_TBL_NANDBOOT MK_CMD_TBL_ENTRY( \ + "nboot", 4, 4, 1, do_nandboot, \ + "nboot - boot from NAND device\n", \ + "loadAddr dev\n" \ +), + +int do_nand (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +#else +#define CMD_TBL_NAND +#define CMD_TBL_NANDBOOT +#endif + +#endif /* _CMD_NAND_H */ diff --git a/include/commproc.h b/include/commproc.h index 5ff82b7..a7d8dbd 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -1128,6 +1128,57 @@ typedef struct scc_enet { /*** NETVIA *******************************************************/ +/* SinoVee Microsystems SC8xx series FEL8xx-AT,SC823,SC850,SC855T,SC860T */ +#if ( defined CONFIG_SVM_SC8xx ) +# ifndef CONFIG_FEC_ENET + +#define PROFF_ENET PROFF_SCC2 +#define CPM_CR_ENET CPM_CR_CH_SCC2 +#define SCC_ENET 1 + + /* Bits in parallel I/O port registers that have to be set/cleared + * * * * to configure the pins for SCC2 use. + * * * */ +#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ +#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ +#define PA_ENET_RCLK ((ushort)0x0400) /* PA 5 */ +#define PA_ENET_TCLK ((ushort)0x0800) /* PA 4 */ + +#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ + +#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ +#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ +/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to + * * * * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. + * * * */ +#define SICR_ENET_MASK ((uint)0x0000ff00) +#define SICR_ENET_CLKRT ((uint)0x00003700) + +# else /* Use FEC for Fast Ethernet */ + +#undef SCC_ENET +#define FEC_ENET + +#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ +#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ +#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ +#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ +#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ +#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ +#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ +#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ +#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ +#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ +#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ +#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ +#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ + +#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ + +# endif /* CONFIG_FEC_ENET */ +#endif /* CONFIG_SVM_SC8xx */ + + #if defined(CONFIG_NETVIA) /* Bits in parallel I/O port registers that have to be set/cleared * to configure the pins for SCC2 use. diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h new file mode 100644 index 0000000..6315f0a --- /dev/null +++ b/include/configs/at91rm9200dk.h @@ -0,0 +1,153 @@ +/* + * Rick Bronson <rick@efn.org> + * + * Configuation settings for the AT91RM9200DK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ +#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ + +#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CONFIG_BAUDRATE 115200 +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL3 1 /* we use SERIAL 3 */ + +#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ + +#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ + +#define CONFIG_COMMANDS \ + (CONFIG_CMD_DFL | \ + CFG_CMD_DHCP | \ + CFG_CMD_NAND ) +/* CFG_CMD_EEPROM | \ might consider these + CFG_CMD_I2C | \ + CFG_CMD_USB | \ + CFG_CMD_MII | \ + CFG_CMD_SDRAM | \ */ +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ +#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ + +#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) +#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) + +#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2)) + +#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0) +#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0) +#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) +#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +/* the following are NOP's in our implementation */ +#define NAND_CTL_CLRALE(nandptr) +#define NAND_CTL_SETALE(nandptr) +#define NAND_CTL_CLRCLE(nandptr) +#define NAND_CTL_SETCLE(nandptr) + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ + +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 + +#define CONFIG_DRIVER_ETHER + +#define PHYS_FLASH_1 0x10000000 +#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */ +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 40 +#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) +#define CFG_ENV_SIZE 0x2000 +#define CFG_LOAD_ADDR 0x21000000 /* default load address */ + +#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CFG_PROMPT "Uboot> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ + +#ifndef __ASSEMBLY__ +/*----------------------------------------------------------------------- + * Board specific extension for bd_info + * + * This structure is embedded in the global bd_info (bd_t) structure + * and can be used by the board specific code (eg board/...) + */ + +struct bd_info_ext +{ + /* helper variable for board environment handling + * + * env_crc_valid == 0 => uninitialised + * env_crc_valid > 0 => environment crc in flash is valid + * env_crc_valid < 0 => environment crc in flash is invalid + */ + int env_crc_valid; +}; +#endif + +#define CFG_HZ AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to + AT91C_TC_TIMER_DIV1_CLOCK */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index 5a7642b..8594e65 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -76,7 +76,7 @@ #define CONFIG_NETMASK 255.255.0.0 #define CONFIG_IPADDR 172.22.2.23 #define CONFIG_SERVERIP 172.22.2.22 -#define CONFIG_BOOTFILE "elinos-dnp1110" +#define CONFIG_BOOTFILE "dnp1110" #define CONFIG_BOOTCOMMAND "tftp; bootm" #if (CONFIG_COMMANDS & CFG_CMD_KGDB) @@ -128,21 +128,23 @@ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ +#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 32 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ #define CFG_FLASH_BASE PHYS_FLASH_1 /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT (31+8) /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ /* timeout values are in ticks */ #define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */ -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xF80000) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ #endif /* __CONFIG_H */ diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h new file mode 100644 index 0000000..b46b0be --- /dev/null +++ b/include/configs/svm_sc8xx.h @@ -0,0 +1,470 @@ +/* + * (C) Copyright 2000, 2001, 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific, + * for SinoVee Microsystems SC8xx series SBC + * http://www.fel.com.cn (Chinese) + * http://www.sinovee.com (English) + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* Custom configuration */ +/* SC823,SC850,SC860SAR, FEL8xx-AT(823/850/860) */ +/* SC85T,SC860T, FEL8xx-AT(855T/860T) */ +/*#define CONFIG_FEL8xx_AT */ +/*#define CONFIG_LCD */ +/* if core > 50MHz , un-comment CONFIG_BUS_DIV2 */ +/* #define CONFIG_50MHz */ +/* #define CONFIG_66MHz */ +/* #define CONFIG_75MHz */ +#define CONFIG_80MHz +/*#define CONFIG_100MHz */ +/* #define CONFIG_BUS_DIV2 1 */ +/* for BOOT device port size */ +/* #define CONFIG_BOOT_8B */ +#define CONFIG_BOOT_16B +/* #define CONFIG_BOOT_32B */ +/* #define CONFIG_CAN_DRIVER */ +/* #define DEBUG */ +#define CONFIG_FEC_ENET + +/* #define CONFIG_SDRAM_16M */ +#define CONFIG_SDRAM_32M +/* #define CONFIG_SDRAM_64M */ +#define CFG_RESET_ADDRESS 0xffffffff +/* + * High Level Configuration Options + * (easy to change) + */ + +/* #define CONFIG_MPC823 1 */ +/* #define CONFIG_MPC850 1 */ +#define CONFIG_MPC855 1 +/* #define CONFIG_MPC860 1 */ +/* #define CONFIG_MPC860T 1 */ + +#undef CONFIG_WATCHDOG /* watchdog */ + +#define CONFIG_SVM_SC8xx 1 /* ...on SVM SC8xx series */ + +#ifdef CONFIG_LCD /* with LCD controller ? */ +/* #define CONFIG_NEC_NL6648BC20 1 / * use NEC NL6648BC20 display */ +#endif + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#undef CONFIG_8xx_CONS_SMC2 +#undef CONFIG_8xx_CONS_NONE +#define CONFIG_BAUDRATE 19200 /* console baudrate = 115kbps */ +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ + +#define CONFIG_BOARD_TYPES 1 /* support board types */ + +#define CONFIG_PREBOOT "echo;echo Welcome to U-Boot SVM port;echo;echo Type \"? or help\" to get on-line help;echo" + +#undef CONFIG_BOOTARGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "net_nfs=tftp 0x210000 $(bootfile);run nfsargs addip;bootm\0" \ + "rootpath=/opt/sinovee/ppc8xx-linux-2.0/target\0" \ + "bootfile=pImage-sc855t\0" \ + "kernel_addr=48000000\0" \ + "ramdisk_addr=48100000\0" \ + "" +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \ + "tftpboot 0x210000 pImage-sc855t;bootm 0x210000" + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + + +#ifdef CONFIG_LCD +# undef CONFIG_STATUS_LED /* disturbs display */ +#else +# define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#endif /* CONFIG_LCD */ + +#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_DOC | \ +/* CFG_CMD_IDE |*/ \ + CFG_CMD_DATE ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFF000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x40000000 +#define CFG_MONITOR_LEN (384 << 10) /* Reserve 192 kB for Monitor */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_IS_IN_FLASH 1 + +#ifdef CONFIG_BOOT_8B +#define CFG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ +#elif defined (CONFIG_BOOT_16B) +#define CFG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ +#elif defined (CONFIG_BOOT_32B) +#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#endif + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + + +/*----------------------------------------------------------------------- + * Hardware Information Block + */ +#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ +#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */ +#define CFG_HWINFO_MAGIC 0x46454C38 /* 'SVM8' */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +/*#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +*/ +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CFG_SYPCR 0xffffff88 +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#ifndef CONFIG_CAN_DRIVER +/*#define CFG_SIUMCR 0x00610c00 */ +#define CFG_SIUMCR 0x00000000 +#else /* we must activate GPL5 in the SIUMCR for CAN */ +#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#endif /* CONFIG_CAN_DRIVER */ + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR 0x0001 + +/*----------------------------------------------------------------------- + * RTCSC - Real-Time Clock Status and Control Register 11-27 + *----------------------------------------------------------------------- + */ +#define CFG_RTCSC 0x00c3 + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR 0x0000 + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * Reset PLL lock status sticky bit, timer expired status bit and timer + * interrupt status bit + */ +#if defined (CONFIG_100MHz) +#define CFG_PLPRCR 0x06301000 +#define CONFIG_8xx_GCLK_FREQ 100000000 +#elif defined (CONFIG_80MHz) +#define CFG_PLPRCR 0x04f01000 +#define CONFIG_8xx_GCLK_FREQ 80000000 +#elif defined(CONFIG_75MHz) +#define CFG_PLPRCR 0x04a00100 +#define CONFIG_8xx_GCLK_FREQ 75000000 +#elif defined(CONFIG_66MHz) +#define CFG_PLPRCR 0x04101000 +#define CONFIG_8xx_GCLK_FREQ 66000000 +#elif defined(CONFIG_50MHz) +#define CFG_PLPRCR 0x03101000 +#define CONFIG_8xx_GCLK_FREQ 50000000 +#endif + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF11 +#ifdef CONFIG_BUS_DIV2 +#define CFG_SCCR 0x02020000 | SCCR_RTSEL +#else /* up to 50 MHz we use a 1:1 clock */ +#define CFG_SCCR 0x02000000 | SCCR_RTSEL +#endif + +/*----------------------------------------------------------------------- + * PCMCIA stuff + *----------------------------------------------------------------------- + * + */ +#define CFG_PCMCIA_MEM_ADDR (0xE0000000) +#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_DMA_ADDR (0xE4000000) +#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000) +#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_IO_ADDR (0xEC000000) +#define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) + +/*----------------------------------------------------------------------- + * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#define CONFIG_IDE_8xx_DIRECT 1 /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_RESET /* reset for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_BASE_ADDR 0xFE100010 +#define CFG_ATA_IDE0_OFFSET 0x0000 +/*#define CFG_ATA_IDE1_OFFSET 0x0C00 */ +#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O + */ +#define CFG_ATA_REG_OFFSET 0x0200 /* Offset for normal register accesses + */ +#define CFG_ATA_ALT_OFFSET 0x0210 /* Offset for alternate registers + */ +#define CONFIG_ATAPI +#define CFG_PIO_MODE 0 + +/*----------------------------------------------------------------------- + * + *----------------------------------------------------------------------- + * + */ +/*#define CFG_DER 0x2002000F*/ +#define CFG_DER 0x0 + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ +#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ +#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ + +/* + * FLASH timing: + */ +#if defined(CONFIG_100MHz) +#define CFG_OR_TIMING_FLASH 0x000002f4 +#define CFG_OR_TIMING_DOC 0x000002f4 +#define CFG_MxMR_PTx 0x61000000 +#define CFG_MPTPR 0x400 + +#elif defined(CONFIG_80MHz) +#define CFG_OR_TIMING_FLASH 0x00000ff4 +#define CFG_OR_TIMING_DOC 0x000001f4 +#define CFG_MxMR_PTx 0x4e000000 +#define CFG_MPTPR 0x400 + +#elif defined(CONFIG_75MHz) +#define CFG_OR_TIMING_FLASH 0x000008f4 +#define CFG_OR_TIMING_DOC 0x000002f4 +#define CFG_MxMR_PTx 0x49000000 +#define CFG_MPTPR 0x400 + +#elif defined(CONFIG_66MHz) +#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ + OR_SCY_3_CLK | OR_EHTR | OR_BI) +/*#define CFG_OR_TIMING_FLASH 0x000001f4 */ +#define CFG_OR_TIMING_DOC 0x000003f4 +#define CFG_MxMR_PTx 0x40000000 +#define CFG_MPTPR 0x400 + +#else /* 50 MHz */ +#define CFG_OR_TIMING_FLASH 0x00000ff4 +#define CFG_OR_TIMING_DOC 0x000001f4 +#define CFG_MxMR_PTx 0x30000000 +#define CFG_MPTPR 0x400 +#endif /*CONFIG_??MHz */ + + +#if defined (CONFIG_BOOT_8B) /* 512K X 8 ,29F040 , 2MB space */ +#define CFG_OR0_PRELIM (0xffe00000 | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8) +#elif defined (CONFIG_BOOT_16B) /* 29lv160 X 16 , 4MB space */ +#define CFG_OR0_PRELIM (0xffc00000 | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16) +#elif defined( CONFIG_BOOT_32B ) /* 29lv160 X 2 X 32, 4/8/16MB , 64MB space */ +#define CFG_OR0_PRELIM (0xfc000000 | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) +#else +#error Boot device port size missing. +#endif + +/* + * Disk-On-Chip configuration + */ + +#define CFG_DOC_SHORT_TIMEOUT +#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ + +#define CFG_DOC_SUPPORT_2000 +#define CFG_DOC_SUPPORT_MILLENNIUM +#define CFG_DOC_BASE 0x80000000 + + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */ diff --git a/include/flash.h b/include/flash.h index b4c8bad..b7f13d3 100644 --- a/include/flash.h +++ b/include/flash.h @@ -105,6 +105,7 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot); #define AMD_MANUFACT 0x00010001 /* AMD manuf. ID in D23..D16, D7..D0 */ #define FUJ_MANUFACT 0x00040004 /* FUJITSU manuf. ID in D23..D16, D7..D0 */ +#define ATM_MANUFACT 0x001F001F /* ATMEL */ #define STM_MANUFACT 0x00200020 /* STM (Thomson) manuf. ID in D23.. -"- */ #define SST_MANUFACT 0x00BF00BF /* SST manuf. ID in D23..D16, D7..D0 */ #define MT_MANUFACT 0x00890089 /* MT manuf. ID in D23..D16, D7..D0 */ @@ -156,6 +157,8 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot); #define AMD_ID_DL640 0x227E227E /* 29DL640D ID (64 M, dual boot sectors)*/ #define AMD_ID_LV640U 0x22D722D7 /* 29LV640U ID (64 M, uniform sectors) */ +#define ATM_ID_BV1614 0x000000C0 /* 49BV1614 ID */ + #define FUJI_ID_29F800BA 0x22582258 /* MBM29F800BA ID (8M) */ #define FUJI_ID_29F800TA 0x22D622D6 /* MBM29F800TA ID (8M) */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index a3a7ec3..4425187 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -1,10 +1,11 @@ /* - * u-boot/include/linux/mtd/nand.h + * linux/include/linux/mtd/nand.h * * Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com> * Steven J. Hill <sjhill@cotw.com> + * Thomas Gleixner <gleixner@autronix.de> * - * $Id: nand.h,v 1.8 2000/10/30 17:16:17 sjhill Exp $ + * $Id: nand.h,v 1.13 2002/04/28 13:40:41 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -23,6 +24,14 @@ * bat later if I did something naughty. * 10-11-2000 SJH Added private NAND flash structure for driver * 10-24-2000 SJH Added prototype for 'nand_scan' function + * 10-29-2001 TG changed nand_chip structure to support + * hardwarespecific function for accessing control lines + * 02-21-2002 TG added support for different read/write adress and + * ready/busy line access function + * 02-26-2002 TG added chip_delay to nand_chip structure to optimize + * command delay times for different chips + * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate + * defines in jffs2/wbuf.c */ #ifndef __LINUX_MTD_NAND_H #define __LINUX_MTD_NAND_H @@ -42,6 +51,82 @@ #define NAND_CMD_RESET 0xff /* + * Enumeration for NAND flash chip state + */ +typedef enum { + FL_READY, + FL_READING, + FL_WRITING, + FL_ERASING, + FL_SYNCING +} nand_state_t; + + +/* + * NAND Private Flash Chip Data + * + * Structure overview: + * + * IO_ADDR - address to access the 8 I/O lines of the flash device + * + * hwcontrol - hardwarespecific function for accesing control-lines + * + * dev_ready - hardwarespecific function for accesing device ready/busy line + * + * chip_lock - spinlock used to protect access to this structure + * + * wq - wait queue to sleep on if a NAND operation is in progress + * + * state - give the current state of the NAND device + * + * page_shift - number of address bits in a page (column address bits) + * + * data_buf - data buffer passed to/from MTD user modules + * + * data_cache - data cache for redundant page access and shadow for + * ECC failure + * + * ecc_code_buf - used only for holding calculated or read ECCs for + * a page read or written when ECC is in use + * + * reserved - padding to make structure fall on word boundary if + * when ECC is in use + */ +struct Nand { + char floor, chip; + unsigned long curadr; + unsigned char curmode; + /* Also some erase/write/pipeline info when we get that far */ +}; + +struct nand_chip { + int page_shift; + u_char *data_buf; + u_char *data_cache; + int cache_page; + u_char ecc_code_buf[6]; + u_char reserved[2]; + char ChipID; /* Type of DiskOnChip */ + struct Nand *chips; + int chipshift; + char* chips_name; + unsigned long erasesize; + unsigned long mfr; /* Flash IDs - only one type of flash per device */ + unsigned long id; + char* name; + struct NFTLrecord nftl; + int nftl_found; + int numchips; + char page256; + char pageadrlen; + unsigned long IO_ADDR; /* address to access the 8 I/O lines to the flash device */ + unsigned long totlen; + uint oobblock; // Size of OOB blocks (e.g. 512) + uint oobsize; // Amount of OOB data per block (e.g. 16) + uint eccsize; +}; + +/* * NAND Flash Manufacturer ID Codes */ #define NAND_MFR_TOSHIBA 0x98 @@ -84,4 +169,30 @@ struct nand_flash_dev { unsigned long erasesize; }; +/* +* Constants for oob configuration +*/ +#define NAND_NOOB_ECCPOS0 0 +#define NAND_NOOB_ECCPOS1 1 +#define NAND_NOOB_ECCPOS2 2 +#define NAND_NOOB_ECCPOS3 3 +#define NAND_NOOB_ECCPOS4 4 +#define NAND_NOOB_ECCPOS5 5 +#define NAND_NOOB_BADBPOS -1 +#define NAND_NOOB_ECCVPOS -1 + +#define NAND_JFFS2_OOB_ECCPOS0 0 +#define NAND_JFFS2_OOB_ECCPOS1 1 +#define NAND_JFFS2_OOB_ECCPOS2 2 +#define NAND_JFFS2_OOB_ECCPOS3 3 +#define NAND_JFFS2_OOB_ECCPOS4 6 +#define NAND_JFFS2_OOB_ECCPOS5 7 +#define NAND_JFFS2_OOB_BADBPOS 5 +#define NAND_JFFS2_OOB_ECCVPOS 4 + +#define NAND_JFFS2_OOB8_FSDAPOS 6 +#define NAND_JFFS2_OOB16_FSDAPOS 8 +#define NAND_JFFS2_OOB8_FSDALEN 2 +#define NAND_JFFS2_OOB16_FSDALEN 8 + #endif /* __LINUX_MTD_NAND_H */ diff --git a/include/pcmcia.h b/include/pcmcia.h index beb1c16..16653f3 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -48,7 +48,7 @@ # else # define CONFIG_PCMCIA_SLOT_B # endif -#elif defined(CONFIG_TQM8xxL) +#elif defined(CONFIG_TQM8xxL) || defined(CONFIG_SVM_SC8xx) # define CONFIG_PCMCIA_SLOT_B /* The TQM8xxL use SLOT_B */ #elif defined(CONFIG_SPD823TS) /* The SPD8xx use SLOT_B */ # define CONFIG_PCMCIA_SLOT_B diff --git a/include/status_led.h b/include/status_led.h index 369cce2..79d9fb4 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -269,6 +269,20 @@ void status_led_set (int led, int state); # define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ +#elif defined(CONFIG_SVM_SC8xx) +# define STATUS_LED_PAR im_cpm.cp_pbpar +# define STATUS_LED_DIR im_cpm.cp_pbdir +# define STATUS_LED_ODR im_cpm.cp_pbodr +# define STATUS_LED_DAT im_cpm.cp_pbdat + +# define STATUS_LED_BIT 0x00000001 +# define STATUS_LED_PERIOD (CFG_HZ / 2) +# define STATUS_LED_STATE STATUS_LED_BLINKING + +# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ + +# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ + /************************************************************************/ #else # error Status LED configuration missing |