diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/PM520.h | 239 | ||||
| -rw-r--r-- | include/configs/PM826.h | 28 | ||||
| -rw-r--r-- | include/configs/PM828.h | 565 | ||||
| -rw-r--r-- | include/configs/trab.h | 4 | ||||
| -rw-r--r-- | include/configs/xm250.h | 355 | ||||
| -rw-r--r-- | include/flash.h | 4 |
6 files changed, 1184 insertions, 11 deletions
diff --git a/include/configs/PM520.h b/include/configs/PM520.h new file mode 100644 index 0000000..66e5282 --- /dev/null +++ b/include/configs/PM520.h @@ -0,0 +1,239 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5200 +#define CONFIG_MPC5XXX 1 /* This is an MPC5xxx CPU */ +#define CONFIG_PM520 1 /* ... on PM520 board */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 9600 /* ... at 9600 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + + +#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ +/* + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + */ +#define CONFIG_PCI 1 +#define CONFIG_PCI_PNP 1 +#define CONFIG_PCI_SCAN_SHOW 1 + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 + +#define CONFIG_NET_MULTI 1 +#define CONFIG_EEPRO100 1 +#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#undef CONFIG_NS8382X + +#define ADD_PCI_CMD CFG_CMD_PCI + +#else /* MPC5100 */ + +#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ + +#endif + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | ADD_PCI_CMD | \ + CFG_CMD_I2C | CFG_CMD_EEPROM | CFG_CMD_DATE) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */ +#define CONFIG_BOOTARGS "root=/dev/ram rw" + +#if defined(CONFIG_MPC5200) +/* + * IPB Bus clocking configuration. + */ +#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#endif +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ + +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR 0x58 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* + * RTC configuration + */ +#define CONFIG_RTC_PCF8563 +#define CFG_I2C_RTC_ADDR 0x51 + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE 0xff800000 +#define CFG_FLASH_SIZE 0x00800000 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x740000) +#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ + +#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ + +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ +#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ + +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ + +#undef CONFIG_FLASH_16BIT /* Flash is 32-bit */ + + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x40000 +#define CONFIG_ENV_OVERWRITE 1 + +/* + * Memory map + */ +#define CFG_MBAR 0xf0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5XXX_FEC 1 +#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration + */ +#define CFG_GPS_PORT_CONFIG 0x10000004 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE +#else +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x0004fb00 +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333333 + +#define CFG_RESET_ADDRESS 0xff000000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/PM826.h b/include/configs/PM826.h index dc70515..942678f 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2001 + * (C) Copyright 2001-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -220,15 +220,18 @@ /*----------------------------------------------------------------------- * Flash and Boot ROM mapping */ - +#ifdef CONFIG_FLASH_32MB +#define CFG_FLASH0_BASE 0x40000000 +#define CFG_FLASH0_SIZE 0x02000000 +#else +#define CFG_FLASH0_BASE 0xFF000000 +#define CFG_FLASH0_SIZE 0x00800000 +#endif #define CFG_BOOTROM_BASE 0xFF800000 #define CFG_BOOTROM_SIZE 0x00080000 -#define CFG_FLASH0_BASE 0xFF000000 -#define CFG_FLASH0_SIZE 0x02000000 #define CFG_DOC_BASE 0xFF800000 #define CFG_DOC_SIZE 0x00100000 - /* Flash bank size (for preliminary settings) */ #define CFG_FLASH_SIZE CFG_FLASH0_SIZE @@ -237,8 +240,11 @@ * FLASH organization */ #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#ifdef CONFIG_FLASH_32MB +#define CFG_MAX_FLASH_SECT 135 /* max num of sects on one chip */ +#else #define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - +#endif #define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ @@ -426,7 +432,6 @@ * ---- --- ------- ------ ------ * 0 60x GPCM 64 bit FLASH * 1 60x SDRAM 64 bit SDRAM - * 2 Local SDRAM 32 bit SDRAM * */ @@ -440,7 +445,12 @@ */ #define CFG_MIN_AM_MASK 0xC0000000 -#define CFG_MPTPR 0x1F00 +/* + * we use the same values for 32 MB and 128 MB SDRAM + * refresh rate = 7.73 uS (64 MHz Bus Clock) + */ +#define CFG_MPTPR 0x2000 +#define CFG_PSRT 0x0E #define CFG_MRS_OFFS 0x00000000 @@ -512,7 +522,7 @@ /* Bank 2 - SDRAM */ -#define CFG_PSRT 0x0F + #ifndef CFG_RAMBOOT #define CFG_BR2_PRELIM ((CFG_SDRAM_BASE & BRx_BA_MSK) |\ BRx_PS_64 |\ diff --git a/include/configs/PM828.h b/include/configs/PM828.h new file mode 100644 index 0000000..d6a926d --- /dev/null +++ b/include/configs/PM828.h @@ -0,0 +1,565 @@ +/* + * (C) Copyright 2001-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef CFG_RAMBOOT + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ +#define CONFIG_PM828 1 /* ...on a PM828 module */ + +#undef CONFIG_DB_CR826_J30x_ON /* J30x jumpers on D.B. carrier */ + +#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" + +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTCOMMAND \ + "bootp;" \ + "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \ + "bootm" + +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +# define CFG_I2C_SPEED 50000 +# define CFG_I2C_SLAVE 0xFE +/* + * Software (bit-bang) I2C driver configuration + */ +#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ +#define I2C_ACTIVE (iop->pdir |= 0x00010000) +#define I2C_TRISTATE (iop->pdir &= ~0x00010000) +#define I2C_READ ((iop->pdat & 0x00010000) != 0) +#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ + else iop->pdat &= ~0x00010000 +#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ + else iop->pdat &= ~0x00020000 +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + + +#define CONFIG_RTC_PCF8563 +#define CFG_I2C_RTC_ADDR 0x51 + +/* + * select serial console configuration + * + * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then + * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 + * for SCC). + * + * if CONFIG_CONS_NONE is defined, then the serial console routines must + * defined elsewhere (for example, on the cogent platform, there are serial + * ports on the motherboard which are used for the serial console - see + * cogent/cma101/serial.[ch]). + */ +#define CONFIG_CONS_ON_SMC /* define if console on SMC */ +#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ +#undef CONFIG_CONS_NONE /* define if console on something else*/ +#define CONFIG_CONS_INDEX 2 /* which serial channel for console */ + +/* + * select ethernet configuration + * + * if CONFIG_ETHER_ON_SCC is selected, then + * - CONFIG_ETHER_INDEX must be set to the channel number (1-4) + * - CONFIG_NET_MULTI must not be defined + * + * if CONFIG_ETHER_ON_FCC is selected, then + * - one or more CONFIG_ETHER_ON_FCCx (x=1,2,3) must also be selected + * - CONFIG_NET_MULTI must be defined + * + * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be + * defined elsewhere (as for the console), or CFG_CMD_NET must be removed + * from CONFIG_COMMANDS to remove support for networking. + */ +#define CONFIG_NET_MULTI +#undef CONFIG_ETHER_NONE /* define if ether on something else */ + +#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ +#define CONFIG_ETHER_INDEX 1 /* which SCC channel for ethernet */ + +#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ +/* + * - Rx-CLK is CLK11 + * - Tx-CLK is CLK10 + */ +#define CONFIG_ETHER_ON_FCC1 +# define CFG_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) +#ifndef CONFIG_DB_CR826_J30x_ON +# define CFG_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK10) +#else +# define CFG_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12) +#endif +/* + * - Rx-CLK is CLK15 + * - Tx-CLK is CLK14 + */ +#define CONFIG_ETHER_ON_FCC2 +# define CFG_CMXFCR_MASK2 (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK) +# define CFG_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14) +/* + * - RAM for BD/Buffers is on the 60x Bus (see 28-13) + * - Enable Full Duplex in FSMR + */ +# define CFG_CPMFCR_RAMTYPE 0 +# define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) + +/* system clock rate (CLKIN) - equal to the 60x and local bus speed */ +#define CONFIG_8260_CLKIN 100000000 /* in Hz */ + +#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC) +#define CONFIG_BAUDRATE 230400 +#else +#define CONFIG_BAUDRATE 9600 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) + +#ifdef CONFIG_PCI +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_DATE | \ + CFG_CMD_DOC | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_PCI) +#else /* ! PCI */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_DATE | \ + CFG_CMD_DOC | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C ) +#endif /* CONFIG_PCI */ + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Disk-On-Chip configuration + */ + +#define CFG_DOC_SHORT_TIMEOUT +#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ + +#define CFG_DOC_SUPPORT_2000 +#define CFG_DOC_SUPPORT_MILLENNIUM + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * Flash and Boot ROM mapping + */ + +#define CFG_BOOTROM_BASE 0xFF800000 +#define CFG_BOOTROM_SIZE 0x00080000 +#define CFG_FLASH0_BASE 0x40000000 +#define CFG_FLASH0_SIZE 0x02000000 +#define CFG_DOC_BASE 0xFF800000 +#define CFG_DOC_SIZE 0x00100000 + + +/* Flash bank size (for preliminary settings) + */ +#define CFG_FLASH_SIZE CFG_FLASH0_SIZE + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CFG_MAX_FLASH_SECT 135 /* max num of sects on one chip */ + +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +#if 0 +/* Start port with environment in flash; switch to EEPROM later */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_FLASH_BASE+0x40000) +#define CFG_ENV_SIZE 0x40000 +#define CFG_ENV_SECT_SIZE 0x40000 +#else +/* Final version: environment in EEPROM */ +#define CFG_ENV_IS_IN_EEPROM 1 +#define CFG_I2C_EEPROM_ADDR 0x58 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ +#define CFG_ENV_OFFSET 512 +#define CFG_ENV_SIZE (2048 - 512) +#endif + +/*----------------------------------------------------------------------- + * Hard Reset Configuration Words + * + * if you change bits in the HRCW, you must also change the CFG_* + * defines for the various registers affected by the HRCW e.g. changing + * HRCW_DPPCxx requires you to also change CFG_SIUMCR. + */ +#if defined(CONFIG_BOOT_ROM) +#define CFG_HRCW_MASTER (HRCW_BPS01 | HRCW_CIP | HRCW_ISB100 | HRCW_BMS) +#else +#define CFG_HRCW_MASTER (HRCW_CIP | HRCW_ISB100 | HRCW_BMS) +#endif + +/* no slaves so just fill with zeros */ +#define CFG_HRCW_SLAVE1 0 +#define CFG_HRCW_SLAVE2 0 +#define CFG_HRCW_SLAVE3 0 +#define CFG_HRCW_SLAVE4 0 +#define CFG_HRCW_SLAVE5 0 +#define CFG_HRCW_SLAVE6 0 +#define CFG_HRCW_SLAVE7 0 + +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xF0000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + * + * 60x SDRAM is mapped at CFG_SDRAM_BASE, local SDRAM + * is mapped at SDRAM_BASE2_PRELIM. + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE CFG_FLASH0_BASE +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT +#endif + +#ifdef CONFIG_PCI +#define CONFIG_PCI_PNP +#define CONFIG_EEPRO100 +#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH*/ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * HIDx - Hardware Implementation-dependent Registers 2-11 + *----------------------------------------------------------------------- + * HID0 also contains cache control - initially enable both caches and + * invalidate contents, then the final state leaves only the instruction + * cache enabled. Note that Power-On and Hard reset invalidate the caches, + * but Soft reset does not. + * + * HID1 has only read-only information - nothing to set. + */ +#define CFG_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\ + HID0_IFEM|HID0_ABE) +#define CFG_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE) +#define CFG_HID2 0 + +/*----------------------------------------------------------------------- + * RMR - Reset Mode Register 5-5 + *----------------------------------------------------------------------- + * turn on Checkstop Reset Enable + */ +#define CFG_RMR RMR_CSRE + +/*----------------------------------------------------------------------- + * BCR - Bus Configuration 4-25 + *----------------------------------------------------------------------- + */ + +#define BCR_APD01 0x10000000 +#define CFG_BCR (BCR_APD01|BCR_ETM|BCR_LETM) /* 8260 mode */ + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 4-31 + *----------------------------------------------------------------------- + */ +#if 0 +#define CFG_SIUMCR (SIUMCR_DPPC00|SIUMCR_APPC10|SIUMCR_CS10PC01) +#else +#define CFG_SIUMCR (SIUMCR_DPPC10|SIUMCR_APPC10) +#endif + + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 4-35 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ + SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) +#else +#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ + SYPCR_SWRI|SYPCR_SWP) +#endif /* CONFIG_WATCHDOG */ + +/*----------------------------------------------------------------------- + * TMCNTSC - Time Counter Status and Control 4-40 + *----------------------------------------------------------------------- + * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, + * and enable Time Counter + */ +#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 4-42 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable + * Periodic timer + */ +#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) + +/*----------------------------------------------------------------------- + * SCCR - System Clock Control 9-8 + *----------------------------------------------------------------------- + */ +#define CFG_SCCR (SCCR_DFBRG00) + +/*----------------------------------------------------------------------- + * RCCR - RISC Controller Configuration 13-7 + *----------------------------------------------------------------------- + */ +#define CFG_RCCR 0 + +/* + * Init Memory Controller: + * + * Bank Bus Machine PortSz Device + * ---- --- ------- ------ ------ + * 0 60x GPCM 64 bit FLASH + * 1 60x SDRAM 64 bit SDRAM + * + */ + + /* Initialize SDRAM on local bus + */ +#define CFG_INIT_LOCAL_SDRAM + + +/* Minimum mask to separate preliminary + * address ranges for CS[0:2] + */ +#define CFG_MIN_AM_MASK 0xC0000000 + +/* + * we use the same values for 32 MB and 128 MB SDRAM + * refresh rate = 7.68 uS (100 MHz Bus Clock) + */ +#define CFG_MPTPR 0x2000 +#define CFG_PSRT 0x16 + +#define CFG_MRS_OFFS 0x00000000 + + +#if defined(CONFIG_BOOT_ROM) +/* + * Bank 0 - Boot ROM (8 bit wide) + */ +#define CFG_BR0_PRELIM ((CFG_BOOTROM_BASE & BRx_BA_MSK)|\ + BRx_PS_8 |\ + BRx_MS_GPCM_P |\ + BRx_V) + +#define CFG_OR0_PRELIM (P2SZ_TO_AM(CFG_BOOTROM_SIZE) |\ + ORxG_CSNT |\ + ORxG_ACS_DIV1 |\ + ORxG_SCY_5_CLK |\ + ORxG_EHTR |\ + ORxG_TRLX) + +/* + * Bank 1 - Flash (64 bit wide) + */ +#define CFG_BR1_PRELIM ((CFG_FLASH_BASE & BRx_BA_MSK) |\ + BRx_PS_64 |\ + BRx_MS_GPCM_P |\ + BRx_V) + +#define CFG_OR1_PRELIM (P2SZ_TO_AM(CFG_FLASH_SIZE) |\ + ORxG_CSNT |\ + ORxG_ACS_DIV1 |\ + ORxG_SCY_5_CLK |\ + ORxG_EHTR |\ + ORxG_TRLX) + +#else /* ! CONFIG_BOOT_ROM */ + +/* + * Bank 0 - Flash (64 bit wide) + */ +#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BRx_BA_MSK) |\ + BRx_PS_64 |\ + BRx_MS_GPCM_P |\ + BRx_V) + +#define CFG_OR0_PRELIM (P2SZ_TO_AM(CFG_FLASH_SIZE) |\ + ORxG_CSNT |\ + ORxG_ACS_DIV1 |\ + ORxG_SCY_5_CLK |\ + ORxG_EHTR |\ + ORxG_TRLX) + +/* + * Bank 1 - Disk-On-Chip + */ +#define CFG_BR1_PRELIM ((CFG_DOC_BASE & BRx_BA_MSK) |\ + BRx_PS_8 |\ + BRx_MS_GPCM_P |\ + BRx_V) + +#define CFG_OR1_PRELIM (P2SZ_TO_AM(CFG_DOC_SIZE) |\ + ORxG_CSNT |\ + ORxG_ACS_DIV1 |\ + ORxG_SCY_5_CLK |\ + ORxG_EHTR |\ + ORxG_TRLX) + +#endif /* CONFIG_BOOT_ROM */ + +/* Bank 2 - SDRAM + */ + +#ifndef CFG_RAMBOOT +#define CFG_BR2_PRELIM ((CFG_SDRAM_BASE & BRx_BA_MSK) |\ + BRx_PS_64 |\ + BRx_MS_SDRAM_P |\ + BRx_V) + + /* SDRAM initialization values for 8-column chips + */ +#define CFG_OR2_8COL (CFG_MIN_AM_MASK |\ + ORxS_BPD_4 |\ + ORxS_ROWST_PBI0_A9 |\ + ORxS_NUMR_12) + +#define CFG_PSDMR_8COL (PSDMR_SDAM_A13_IS_A5 |\ + PSDMR_BSMA_A14_A16 |\ + PSDMR_SDA10_PBI0_A10 |\ + PSDMR_RFRC_7_CLK |\ + PSDMR_PRETOACT_2W |\ + PSDMR_ACTTORW_2W |\ + PSDMR_LDOTOPRE_1C |\ + PSDMR_WRC_1C |\ + PSDMR_CL_2) + + /* SDRAM initialization values for 9-column chips + */ +#define CFG_OR2_9COL (CFG_MIN_AM_MASK |\ + ORxS_BPD_4 |\ + ORxS_ROWST_PBI0_A7 |\ + ORxS_NUMR_13) + +#define CFG_PSDMR_9COL (PSDMR_SDAM_A14_IS_A5 |\ + PSDMR_BSMA_A13_A15 |\ + PSDMR_SDA10_PBI0_A9 |\ + PSDMR_RFRC_7_CLK |\ + PSDMR_PRETOACT_2W |\ + PSDMR_ACTTORW_2W |\ + PSDMR_LDOTOPRE_1C |\ + PSDMR_WRC_1C |\ + PSDMR_CL_2) + +#define CFG_OR2_PRELIM CFG_OR2_9COL +#define CFG_PSDMR CFG_PSDMR_9COL + +#endif /* CFG_RAMBOOT */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/trab.h b/include/configs/trab.h index 5e0b14f..55a6f69 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -250,7 +250,7 @@ "add_net=setenv bootargs $bootargs ethaddr=$ethaddr " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ "add_misc=setenv bootargs $bootargs console=ttyS0 panic=1\0" \ - "u-boot=/tftpboot/TRAB/u-boot.bin-old\0" \ + "u-boot=/tftpboot/TRAB/u-boot.bin\0" \ "load=tftp C100000 ${u-boot}\0" \ "update=protect off 0 3FFFF;era 0 3FFFF;" \ "cp.b C100000 0 $filesize;" \ @@ -273,7 +273,7 @@ "add_net=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \ "add_misc=setenv bootargs $(bootargs) console=ttyS0 panic=1\0" \ - "u-boot=/tftpboot/TRAB/u-boot.bin-old\0" \ + "u-boot=/tftpboot/TRAB/u-boot.bin\0" \ "load=tftp C100000 $(u-boot)\0" \ "update=protect off 0 3FFFF;era 0 3FFFF;" \ "cp.b C100000 0 $(filesize);" \ diff --git a/include/configs/xm250.h b/include/configs/xm250.h new file mode 100644 index 0000000..10f69d9 --- /dev/null +++ b/include/configs/xm250.h @@ -0,0 +1,355 @@ +/* + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ +#define CONFIG_XM250 1 /* on a MicroSys XM250 Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool; this lives below the uppermost 128 KiB which are + * used for the RAM copy of the uboot code + * + */ +#define CFG_MALLOC_LEN (256*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE 0x04000300 +#undef CONFIG_SMC91111_EXT_PHY +#define CONFIG_SMC_USE_32_BIT +#undef CONFIG_SHOW_ACTIVITY +#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ + +/* + * I2C bus + */ +#define CONFIG_HARD_I2C 1 +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xfe + +#define CONFIG_RTC_PCF8563 1 +#define CFG_I2C_RTC_ADDR 0x51 + +#define CFG_I2C_EEPROM_ADDR 0x58 /* A0 = 0 (hardwired) */ +#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* 4 bits = 16 octets */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* length of address */ +#define CFG_EEPROM_SIZE 2048 /* size in bytes */ +#undef CFG_I2C_INIT_BOARD /* board has no own init */ + +/* + * select serial console configuration + */ +#define CONFIG_FFUART 1 /* we use FFUART */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ELF | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DATE | \ + CFG_CMD_I2C ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa3000000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x161 /* set core clock to 400/400/100 MHz */ + + /* valid baudrates */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Definitions related to passing arguments to kernel. + */ +#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ +#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ +#undef CONFIG_INITRD_TAG /* do not send initrd params */ +#undef CONFIG_VFD /* do not send framebuffer setup */ + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x04000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ +#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/* + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ +#define CFG_FLASH_LOCK_TOUT (2*CFG_HZ) /* Timeout for Flash Set Lock Bit */ +#define CFG_FLASH_UNLOCK_TOUT (2*CFG_HZ) /* Timeout for Flash Clear Lock Bits */ +#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x4000 +#define CFG_ENV_SECT_SIZE 0x40000 /* Size of the Environment Sector */ +#define CFG_MONITOR_LEN 0x20000 /* 128 KiB */ + +/****************************************************************************** + * + * CPU specific defines + * + ******************************************************************************/ + +/* + * GPIO settings + * + * GPIO pin assignments + * GPIO Name Dir Out AF + * 0 NC + * 1 NC + * 2 SIRQ1 I + * 3 SIRQ2 I + * 4 SIRQ3 I + * 5 DMAACK1 O 0 + * 6 DMAACK2 O 0 + * 7 DMAACK3 O 0 + * 8 TC1 O 0 + * 9 TC2 O 0 + * 10 TC3 O 0 + * 11 nDMAEN O 1 + * 12 AENCTRL O 0 + * 13 PLDTC O 0 + * 14 ETHIRQ I + * 15 NC + * 16 NC + * 17 NC + * 18 RDY I + * 19 DMASIO I + * 20 ETHIRQ NC + * 21 NC + * 22 PGMEN O 1 FIXME for debug only enable flash + * 23 NC + * 24 NC + * 25 NC + * 26 NC + * 27 NC + * 28 NC + * 29 NC + * 30 NC + * 31 NC + * 32 NC + * 33 NC + * 34 FFRXD I 01 + * 35 FFCTS I 01 + * 36 FFDCD I 01 + * 37 FFDSR I 01 + * 38 FFRI I 01 + * 39 FFTXD O 1 10 + * 40 FFDTR O 0 10 + * 41 FFRTS O 0 10 + * 42 RS232FOFF O 0 00 + * 43 NC + * 44 NC + * 45 IRSL0 O 0 + * 46 IRRX0 I 01 + * 47 IRTX0 O 0 10 + * 48 NC + * 49 nIOWE O 0 + * 50 NC + * 51 NC + * 52 NC + * 53 NC + * 54 NC + * 55 NC + * 56 NC + * 57 NC + * 58 DKDIRQ I + * 59 NC + * 60 NC + * 61 NC + * 62 NC + * 63 NC + * 64 COMLED O 0 + * 65 COMLED O 0 + * 66 COMLED O 0 + * 67 COMLED O 0 + * 68 COMLED O 0 + * 69 COMLED O 0 + * 70 COMLED O 0 + * 71 COMLED O 0 + * 72 NC + * 73 NC + * 74 NC + * 75 NC + * 76 NC + * 77 NC + * 78 CSIO O 1 + * 79 NC + * 80 CSETH O 1 + * + * NOTE: All NC's are defined to be outputs + * + */ +/* Pin direction control */ +#define CFG_GPDR0_VAL 0xd3808000 +#define CFG_GPDR1_VAL 0xfcffab83 +#define CFG_GPDR2_VAL 0x0001ffff +/* Set and Clear registers */ +#define CFG_GPSR0_VAL 0x00008000 +#define CFG_GPSR1_VAL 0x00ff0002 +#define CFG_GPSR2_VAL 0x0001c000 +#define CFG_GPCR0_VAL 0x00000000 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 +/* Edge detect registers (these are set by the kernel) */ +#define CFG_GRER0_VAL 0x00002180 +#define CFG_GRER1_VAL 0x00000000 +#define CFG_GRER2_VAL 0x00000000 +#define CFG_GFER0_VAL 0x000043e0 +#define CFG_GFER1_VAL 0x00000000 +#define CFG_GFER2_VAL 0x00000000 +/* Alternate function registers */ +#define CFG_GAFR0_L_VAL 0x80000004 +#define CFG_GAFR0_U_VAL 0x595a8010 +#define CFG_GAFR1_L_VAL 0x699a9559 +#define CFG_GAFR1_U_VAL 0xaaa5aaaa +#define CFG_GAFR2_L_VAL 0xaaaaaaaa +#define CFG_GAFR2_U_VAL 0x00000002 + +/* + * Clocks, power control and interrupts + */ +#define CFG_PSSR_VAL 0x00000030 +#define CFG_CCCR_VAL 0x00000161 /* 100 MHz memory, 400 MHz CPU, 400 Turbo */ +#define CFG_CKEN_VAL 0x000141ec /* FFUART and STUART enabled */ +#define CFG_ICMR_VAL 0x00000000 /* No interrupts enabled */ + +/* FIXME + * + * RTC settings + * Watchdog + * + */ + +/* + * Memory settings + * + */ +#define CFG_MSC0_VAL 0x122423f0 /* FLASH / LAN (cs0)/(cS1) */ +#define CFG_MSC1_VAL 0x35f4aa4c /* USB / ST3+ST5 (cs2)/(cS3) */ +#define CFG_MSC2_VAL 0x35f435fc /* IDE / BCR + WatchDog (cs4)/(cS5) */ +#define CFG_MDCNFG_VAL 0x000009c9 +#define CFG_MDMRS_VAL 0x00220022 +#define CFG_MDREFR_VAL 0x000da018 /* Initial setting, individual bits set in memsetup.S */ + +/* + * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init) + */ +#define CFG_MECR_VAL 0x00000000 +#define CFG_MCMEM0_VAL 0x00010504 +#define CFG_MCMEM1_VAL 0x00010504 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00004715 +#define CFG_MCIO1_VAL 0x00004715 + +/* Board specific defines */ + +#ifndef __ASSEMBLY__ + +/* global prototypes */ +void led_code(int code, int color); + +#endif + +#endif /* __CONFIG_H */ diff --git a/include/flash.h b/include/flash.h index ce140b3..5221907 100644 --- a/include/flash.h +++ b/include/flash.h @@ -168,7 +168,9 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define AMD_ID_DL163B 0x222B222B /* 29DL163B ID (16 M, bottom boot sect) */ #define AMD_ID_LV320T 0x22F622F6 /* 29LV320T ID (32 M, top boot sector) */ +#define MX_ID_LV320T 0x22A722A7 /* 29LV320T by Macronix, AMD compatible */ #define AMD_ID_LV320B 0x22F922F9 /* 29LV320B ID (32 M, bottom boot sect) */ +#define MX_ID_LV320B 0x22A822A8 /* 29LV320B by Macronix, AMD compatible */ #define AMD_ID_DL322T 0x22552255 /* 29DL322T ID (32 M, top boot sector) */ #define AMD_ID_DL322B 0x22562256 /* 29DL322B ID (32 M, bottom boot sect) */ @@ -348,6 +350,8 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define FLASH_AMLV320B 0x00A7 /* AMD 29LV320MB ( 32M = 2M x 16 ) */ #define FLASH_AMLV320T 0x00A8 /* AMD 29LV320MT ( 32M = 2M x 16 ) */ #define FLASH_AMLV256U 0x00AA /* AMD 29LV256M ( 256M = 16M x 16 ) */ +#define FLASH_MXLV320B 0x00AB /* MX 29LV320MB ( 32M = 2M x 16 ) */ +#define FLASH_MXLV320T 0x00AC /* MX 29LV320MT ( 32M = 2M x 16 ) */ /* Intel 28F256L18T 256M = 128K x 255 + 32k x 4 */ #define FLASH_28F256L18T 0x00B0 #define FLASH_AMDL163T 0x00B2 /* AMD AM29DL163T (2M x 16 ) */ |