diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-arm/arch-pxa/mmc.h | 17 | ||||
| -rw-r--r-- | include/asm-arm/mach-types.h | 13 | ||||
| -rw-r--r-- | include/asm-arm/u-boot-arm.h | 2 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap700x/mmc.h | 19 | ||||
| -rw-r--r-- | include/asm-ppc/bitops.h | 52 | ||||
| -rw-r--r-- | include/asm-ppc/processor.h | 7 | ||||
| -rw-r--r-- | include/common.h | 7 | ||||
| -rw-r--r-- | include/configs/MPC8349EMDS.h | 1 | ||||
| -rw-r--r-- | include/configs/MVBLM7.h | 7 | ||||
| -rw-r--r-- | include/configs/davinci_sffsdr.h | 177 | ||||
| -rw-r--r-- | include/configs/ml300.h | 1 | ||||
| -rw-r--r-- | include/configs/sacsng.h | 12 | ||||
| -rw-r--r-- | include/exports.h | 2 | ||||
| -rw-r--r-- | include/lmb.h | 1 | ||||
| -rw-r--r-- | include/mmc.h | 24 | ||||
| -rw-r--r-- | include/ppc440.h | 2 | ||||
| -rw-r--r-- | include/sha256.h | 16 | ||||
| -rw-r--r-- | include/spi.h | 9 |
18 files changed, 321 insertions, 48 deletions
diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h index 9440d80..85e144b 100644 --- a/include/asm-arm/arch-pxa/mmc.h +++ b/include/asm-arm/arch-pxa/mmc.h @@ -110,23 +110,6 @@ #define MMC_DEFAULT_RCA 1 #define MMC_BLOCK_SIZE 512 -#define MMC_CMD_RESET 0 -#define MMC_CMD_SEND_OP_COND 1 -#define MMC_CMD_ALL_SEND_CID 2 -#define MMC_CMD_SET_RCA 3 -#define MMC_CMD_SELECT_CARD 7 -#define MMC_CMD_SEND_CSD 9 -#define MMC_CMD_SEND_CID 10 -#define MMC_CMD_SEND_STATUS 13 -#define MMC_CMD_SET_BLOCKLEN 16 -#define MMC_CMD_READ_BLOCK 17 -#define MMC_CMD_RD_BLK_MULTI 18 -#define MMC_CMD_WRITE_BLOCK 24 -#define MMC_CMD_APP_CMD 55 - -#define SD_CMD_APP_SET_BUS_WIDTH 6 -#define SD_CMD_APP_OP_COND 41 - #define MMC_MAX_BLOCK_SIZE 512 #define MMC_R1_IDLE_STATE 0x01 diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h index aaf2ea2..b347857 100644 --- a/include/asm-arm/mach-types.h +++ b/include/asm-arm/mach-types.h @@ -1595,6 +1595,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_P300 1602 #define MACH_TYPE_XDACOMET 1603 #define MACH_TYPE_DEXFLEX2 1604 +#define MACH_TYPE_SFFSDR 1657 #ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type @@ -16500,6 +16501,18 @@ extern unsigned int __machine_arch_type; # define machine_is_schmoogie() (0) #endif +#ifdef CONFIG_MACH_SFFSDR +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SFFSDR +# endif +# define machine_is_sffsdr() (machine_arch_type == MACH_TYPE_SFFSDR) +#else +# define machine_is_sffsdr() (0) +#endif + #ifdef CONFIG_MACH_AZTOOL # ifdef machine_arch_type # undef machine_arch_type diff --git a/include/asm-arm/u-boot-arm.h b/include/asm-arm/u-boot-arm.h index 41e7a8f..4ee5a32 100644 --- a/include/asm-arm/u-boot-arm.h +++ b/include/asm-arm/u-boot-arm.h @@ -52,7 +52,7 @@ void setup_revision_tag (struct tag **params); /* To be fixed! */ /* ------------------------------------------------------------ */ /* common/cmd_nvedit.c */ -void setenv (char *, char *); +int setenv (char *, char *); /* cpu/.../interrupt.c */ void reset_timer_masked (void); diff --git a/include/asm-avr32/arch-at32ap700x/mmc.h b/include/asm-avr32/arch-at32ap700x/mmc.h index 6a33fef..9caba91 100644 --- a/include/asm-avr32/arch-at32ap700x/mmc.h +++ b/include/asm-avr32/arch-at32ap700x/mmc.h @@ -71,25 +71,6 @@ struct mmc_csd u8 one:1; }; -/* MMC Command numbers */ -#define MMC_CMD_GO_IDLE_STATE 0 -#define MMC_CMD_SEND_OP_COND 1 -#define MMC_CMD_ALL_SEND_CID 2 -#define MMC_CMD_SET_RELATIVE_ADDR 3 -#define MMC_CMD_SD_SEND_RELATIVE_ADDR 3 -#define MMC_CMD_SET_DSR 4 -#define MMC_CMD_SELECT_CARD 7 -#define MMC_CMD_SEND_CSD 9 -#define MMC_CMD_SEND_CID 10 -#define MMC_CMD_SEND_STATUS 13 -#define MMC_CMD_SET_BLOCKLEN 16 -#define MMC_CMD_READ_SINGLE_BLOCK 17 -#define MMC_CMD_READ_MULTIPLE_BLOCK 18 -#define MMC_CMD_WRITE_BLOCK 24 -#define MMC_CMD_APP_CMD 55 - -#define MMC_ACMD_SD_SEND_OP_COND 41 - #define R1_ILLEGAL_COMMAND (1 << 22) #define R1_APP_CMD (1 << 5) diff --git a/include/asm-ppc/bitops.h b/include/asm-ppc/bitops.h index 4e9c608..daa66cf 100644 --- a/include/asm-ppc/bitops.h +++ b/include/asm-ppc/bitops.h @@ -152,6 +152,7 @@ extern __inline__ int test_bit(int nr, __const__ volatile void *addr) } /* Return the bit position of the most significant 1 bit in a word */ +/* - the result is undefined when x == 0 */ extern __inline__ int __ilog2(unsigned int x) { int lz; @@ -167,6 +168,57 @@ extern __inline__ int ffz(unsigned int x) return __ilog2(x & -x); } +/* + * fls: find last (most-significant) bit set. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + * + * On powerpc, __ilog2(0) returns -1, but this is not safe in general + */ +static __inline__ int fls(unsigned int x) +{ + return __ilog2(x) + 1; +} + +/** + * fls64 - find last set bit in a 64-bit word + * @x: the word to search + * + * This is defined in a similar way as the libc and compiler builtin + * ffsll, but returns the position of the most significant set bit. + * + * fls64(value) returns 0 if value is 0 or the position of the last + * set bit if value is nonzero. The last (most significant) bit is + * at position 64. + */ +#if BITS_PER_LONG == 32 +static inline int fls64(__u64 x) +{ + __u32 h = x >> 32; + if (h) + return fls(h) + 32; + return fls(x); +} +#elif BITS_PER_LONG == 64 +static inline int fls64(__u64 x) +{ + if (x == 0) + return 0; + return __ilog2(x) + 1; +} +#else +#error BITS_PER_LONG not 32 or 64 +#endif + +static inline int __ilog2_u64(u64 n) +{ + return fls64(n) - 1; +} + +static inline int ffs64(u64 x) +{ + return __ilog2_u64(x & -x) + 1ull; +} + #ifdef __KERNEL__ /* diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 5b50679..10fd478 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -970,8 +970,15 @@ struct cpu_type { struct cpu_type *identify_cpu(u32 ver); +#if defined(CONFIG_MPC85xx) #define CPU_TYPE_ENTRY(n, v) \ { .name = #n, .soc_ver = SVR_##v, } +#else +#if defined(CONFIG_MPC83XX) +#define CPU_TYPE_ENTRY(x) {#x, SPR_##x} +#endif +#endif + #ifndef CONFIG_MACH_SPECIFIC extern int _machine; diff --git a/include/common.h b/include/common.h index fd5adb3..10b997e 100644 --- a/include/common.h +++ b/include/common.h @@ -243,9 +243,9 @@ char *getenv (char *); int getenv_r (char *name, char *buf, unsigned len); int saveenv (void); #ifdef CONFIG_PPC /* ARM version to be fixed! */ -void inline setenv (char *, char *); +int inline setenv (char *, char *); #else -void setenv (char *, char *); +int setenv (char *, char *); #ifdef CONFIG_HAS_UID void forceenv (char *, char *); #endif @@ -682,6 +682,9 @@ void __attribute__((weak)) show_boot_progress (int val); #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) +#define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1) +#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask)) + /* Multicore arch functions */ #ifdef CONFIG_MP int cpu_status(int nr); diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 37e3ca4..8705838 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -355,7 +355,6 @@ /* SPI */ #define CONFIG_MPC8XXX_SPI -#define CONFIG_HARD_SPI /* SPI with hardware support */ #undef CONFIG_SOFT_SPI /* SPI bit-banged */ /* GPIOs. Used as SPI chip selects */ diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 349ca14..b412655 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -27,7 +27,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define MV_VERSION "v1.0.1" +#include <version.h> /* * High Level Configuration Options @@ -262,7 +262,7 @@ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE -#define CONFIG_LOADS_ECHO +#define CONFIG_LOADS_ECHO #define CFG_LOADS_BAUD_CHANGE /* @@ -336,6 +336,7 @@ #define CFG_HID0_FINAL CFG_HID0_INIT #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* DDR */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) @@ -446,7 +447,7 @@ "mv_dtb_addr=" MV_DTB_ADDR "\0" \ "mv_dtb_addr_ram=" MV_DTB_ADDR_RAM "\0" \ "dtb_name=" MV_DTB_NAME "\0" \ - "mv_version=" MV_VERSION "\0" \ + "mv_version=" U_BOOT_VERSION "\0" \ "dhcp_client_id=" MV_CI "\0" \ "dhcp_vendor-class-identifier=" MV_VCI "\0" \ "netretry=no\0" \ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h new file mode 100644 index 0000000..41a6763 --- /dev/null +++ b/include/configs/davinci_sffsdr.h @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/*=======*/ +/* Board */ +/*=======*/ +#define SFFSDR +#define CFG_NAND_LARGEPAGE +#define CFG_USE_NAND +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +/*==================================================*/ +/* EEPROM definitions for Atmel 24LC64 EEPROM chip */ +/*==================================================*/ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ +#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_OVERWRITE_ETHADDR_ONCE +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#undef CFG_ENV_IS_IN_FLASH +#define CFG_NO_FLASH +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_128K +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CFG_NAND_BASE 0x02000000 +#define CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +/*=====================*/ +/* Board related stuff */ +/*=====================*/ +/*==========================================*/ +/* I2C switch definitions for PCA9543 chip */ +/* on Lyrtech SFF SDR board. */ +/* This chip has a single register. */ +/*==========================================*/ +#define CFG_I2C_PCA9543_ADDR 0x70 +#define CFG_I2C_PCA9543_ADDR_LEN 0 +#define CFG_I2C_PCA9543_ENABLE_CH0 0x01 /* Enable channel 0. */ +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +/* Print buffer size */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* Default Linux kernel + * load address. */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, + * may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +/* + * Define this to load an Integrity kernel. + * +#define CONFIG_CMD_ELF + */ + +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS \ + "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot" + +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_NAND +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/ml300.h b/include/configs/ml300.h index 1945918..319923a 100644 --- a/include/configs/ml300.h +++ b/include/configs/ml300.h @@ -54,6 +54,7 @@ #define CONFIG_405 1 /* This is a PPC405 CPU */ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ +#define CONFIG_XILINX_405 1 #define CONFIG_XILINX_ML300 1 /* ...on a Xilinx ML300 board */ #define CONFIG_SYSTEMACE 1 diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 4974fb4..2a398e8 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -272,10 +272,14 @@ #undef SPI_INIT /* no port initialization needed */ #define SPI_READ ((immr->im_ioport.iop_pdatd & I2C_MISO) != 0) -#define SPI_SDA(bit) if(bit) immr->im_ioport.iop_pdatd |= I2C_MOSI; \ - else immr->im_ioport.iop_pdatd &= ~I2C_MOSI -#define SPI_SCL(bit) if(bit) immr->im_ioport.iop_pdatd |= I2C_SCLK; \ - else immr->im_ioport.iop_pdatd &= ~I2C_SCLK +#define SPI_SDA(bit) do { \ + if(bit) immr->im_ioport.iop_pdatd |= I2C_MOSI; \ + else immr->im_ioport.iop_pdatd &= ~I2C_MOSI; \ + } while (0) +#define SPI_SCL(bit) do { \ + if(bit) immr->im_ioport.iop_pdatd |= I2C_SCLK; \ + else immr->im_ioport.iop_pdatd &= ~I2C_SCLK; \ + } while (0) #define SPI_DELAY /* No delay is needed */ #endif /* CONFIG_SOFT_SPI */ diff --git a/include/exports.h b/include/exports.h index d6512cb..6377875 100644 --- a/include/exports.h +++ b/include/exports.h @@ -22,7 +22,7 @@ void vprintf(const char *, va_list); void do_reset (void); unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base); char *getenv (char *name); -void setenv (char *varname, char *varvalue); +int setenv (char *varname, char *varvalue); long simple_strtol(const char *cp,char **endp,unsigned int base); int strcmp(const char * cs,const char * ct); #ifdef CONFIG_HAS_UID diff --git a/include/lmb.h b/include/lmb.h index 03d7667..0283075 100644 --- a/include/lmb.h +++ b/include/lmb.h @@ -43,6 +43,7 @@ extern phys_addr_t lmb_alloc_base(struct lmb *lmb, phys_size_t size, ulong align extern phys_addr_t __lmb_alloc_base(struct lmb *lmb, phys_size_t size, ulong align, phys_addr_t max_addr); extern int lmb_is_reserved(struct lmb *lmb, phys_addr_t addr); +extern long lmb_free(struct lmb *lmb, u64 base, u64 size); extern void lmb_dump_all(struct lmb *lmb); diff --git a/include/mmc.h b/include/mmc.h index a271695..19c76fe 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -25,6 +25,30 @@ #define _MMC_H_ #include <asm/arch/mmc.h> +/* MMC command numbers */ +#define MMC_CMD_GO_IDLE_STATE 0 +#define MMC_CMD_SEND_OP_COND 1 +#define MMC_CMD_ALL_SEND_CID 2 +#define MMC_CMD_SET_RELATIVE_ADDR 3 +#define MMC_CMD_SET_DSR 4 +#define MMC_CMD_SELECT_CARD 7 +#define MMC_CMD_SEND_CSD 9 +#define MMC_CMD_SEND_CID 10 +#define MMC_CMD_SEND_STATUS 13 +#define MMC_CMD_SET_BLOCKLEN 16 +#define MMC_CMD_READ_SINGLE_BLOCK 17 +#define MMC_CMD_READ_MULTIPLE_BLOCK 18 +#define MMC_CMD_WRITE_BLOCK 24 +#define MMC_CMD_APP_CMD 55 + +/* SD Card command numbers */ +#define SD_CMD_SEND_RELATIVE_ADDR 3 +#define SD_CMD_SWITCH 6 +#define SD_CMD_SEND_IF_COND 8 + +#define SD_CMD_APP_SET_BUS_WIDTH 6 +#define SD_CMD_APP_SEND_OP_COND 41 + int mmc_init(int verbose); int mmc_read(ulong src, uchar *dst, int size); int mmc_write(uchar *src, ulong dst, int size); diff --git a/include/ppc440.h b/include/ppc440.h index 62f1680..c581f1b 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -2471,6 +2471,8 @@ #define AHB_TOP 0xA4 #define AHB_BOT 0xA5 +#define SDR0_AHB_CFG 0x370 +#define SDR0_USB2HOST_CFG 0x371 #endif /* CONFIG_460EX || CONFIG_460GT */ #define SDR0_SDCS_SDD (0x80000000 >> 31) diff --git a/include/sha256.h b/include/sha256.h new file mode 100644 index 0000000..e38ea89 --- /dev/null +++ b/include/sha256.h @@ -0,0 +1,16 @@ +#ifndef _SHA256_H +#define _SHA256_H + +#define SHA256_SUM_LEN 32 + +typedef struct { + uint32_t total[2]; + uint32_t state[8]; + uint8_t buffer[64]; +} sha256_context; + +void sha256_starts(sha256_context * ctx); +void sha256_update(sha256_context * ctx, uint8_t * input, uint32_t length); +void sha256_finish(sha256_context * ctx, uint8_t digest[SHA256_SUM_LEN]); + +#endif /* _SHA256_H */ diff --git a/include/spi.h b/include/spi.h index 7744c2e..320e50e 100644 --- a/include/spi.h +++ b/include/spi.h @@ -24,6 +24,15 @@ #ifndef _SPI_H_ #define _SPI_H_ +/* Controller-specific definitions: */ + +/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */ +#ifdef CONFIG_MPC8XXX_SPI +# ifndef CONFIG_HARD_SPI +# define CONFIG_HARD_SPI +# endif +#endif + /* SPI mode flags */ #define SPI_CPHA 0x01 /* clock phase */ #define SPI_CPOL 0x02 /* clock polarity */ |