diff options
Diffstat (limited to 'include')
93 files changed, 15491 insertions, 3882 deletions
diff --git a/include/asm-blackfin/arch-bf533/anomaly.h b/include/asm-blackfin/arch-bf533/anomaly.h new file mode 100644 index 0000000..4fe425c --- /dev/null +++ b/include/asm-blackfin/arch-bf533/anomaly.h @@ -0,0 +1,172 @@ +/* + * File: include/asm-blackfin/arch-bf533/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* This file shoule be up to date with: + * - Revision U, May 17, 2006; ADSP-BF533 Blackfin Processor Anomaly List + * - Revision Y, May 17, 2006; ADSP-BF532 Blackfin Processor Anomaly List + * - Revision T, May 17, 2006; ADSP-BF531 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 or 0.2 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2)) +#error Kernel will not work on BF533 Version 0.1 or 0.2 +#endif + +/* Issues that are common to 0.5, 0.4, and 0.3 silicon */ +#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on + every corresponding match */ +#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive + Channel DMA stops */ +#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR + registers. */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits*/ +#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not + functional */ +#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable + state */ +#define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic + control */ +#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when + killed in a particular stage*/ +#endif + +/* These issues only occur on 0.3 or 0.4 BF533 */ +#if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not + updated at the same time. */ +#define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data + Cache Fill can be corrupted after or during + Instruction DMA if certain core stalls exist */ +#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General + Purpose TX or RX modes */ +#define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by + preceding memory read */ +#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during + inactive channels in certain conditions */ +#define ANOMALY_05000202 /* Possible infinite stall with specific dual dag + situation */ +#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ +#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ +#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect + data*/ +#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate + Differences in certain Conditions */ +#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ +#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to + hardware reset */ +#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or + IDLE around a Change of Control causes + unpredictable results */ +#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the + shadow of a conditional branch */ +#define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware + errors */ +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event + interrupt not functional */ +#define ANOMALY_05000257 /* An interrupt or exception during short Hardware + loops may cause the instruction fetch unit to + malfunction */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of + the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ +#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE + instruction will cause an infinite stall in the + second to last instruction in a hardware loop */ +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + SPORT external receive and transmit clocks. */ +#define ANOMALY_05000269 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to increase. */ +#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to decrease */ +#endif + +/* These issues are only on 0.4 silicon */ +#if (defined(CONFIG_BF_REV_0_4)) +#define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) */ +#endif + +/* These issues are only on 0.3 silicon */ +#if defined(CONFIG_BF_REV_0_3) +#define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with + External Frame Syncs */ +#define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative + Instruction or Data Fetches, or by Fetches at the + boundary of reserved memory space */ +#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs + when polarity setting is changed */ +#define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data + corruption */ +#define ANOMALY_05000199 /* DMA current address shows wrong value during carry + fix */ +#define ANOMALY_05000201 /* Receive frame sync not ignored during active + frames in sport MCM */ +#define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA + stopping */ +#if defined(CONFIG_BF533) +#define ANOMALY_05000204 /* Incorrect data read with write-through cache and + allocate cache lines on reads only mode */ +#endif /* CONFIG_BF533 */ +#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ +#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain + instructions */ +#define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame + Sync Transmit Mode */ +#define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */ +#endif + +#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/cpu/bf533_serial.h b/include/asm-blackfin/arch-bf533/bf533_serial.h index d5e162a..ce58863 100644 --- a/include/asm-blackfin/cpu/bf533_serial.h +++ b/include/asm-blackfin/arch-bf533/bf533_serial.h @@ -22,7 +22,6 @@ * MA 02111-1307 USA */ - #ifndef _BF533_SERIAL_H_ #define _BF533_SERIAL_H_ diff --git a/include/asm-blackfin/cpu/bf533_rtc.h b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h index bc09922..bc09922 100644 --- a/include/asm-blackfin/cpu/bf533_rtc.h +++ b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h diff --git a/include/asm-blackfin/cpu/cdefBF531.h b/include/asm-blackfin/arch-bf533/cdefBF531.h index 68d841d..3877db8 100644 --- a/include/asm-blackfin/cpu/cdefBF531.h +++ b/include/asm-blackfin/arch-bf533/cdefBF531.h @@ -19,6 +19,6 @@ #ifndef _CDEFBF531_H #define _CDEFBF531_H -#include <cdefBF532.h> +#include <asm/arch-bf533/cdefBF532.h> #endif /* _CDEFBF531_H */ diff --git a/include/asm-blackfin/cpu/cdefBF532.h b/include/asm-blackfin/arch-bf533/cdefBF532.h index a4d422f..bca1ed1 100644 --- a/include/asm-blackfin/cpu/cdefBF532.h +++ b/include/asm-blackfin/arch-bf533/cdefBF532.h @@ -26,10 +26,10 @@ */ /* include all Core registers and bit definitions */ -#include <asm/cpu/defBF532.h> +#include <asm/arch-bf533/defBF532.h> /* include core specific register pointer definitions */ -#include <asm/cpu/cdef_LPBlackfin.h> +#include <asm/arch-common/cdef_LPBlackfin.h> /* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */ #define pPLL_CTL ((volatile unsigned short *)PLL_CTL) diff --git a/include/asm-blackfin/cpu/cdefBF533.h b/include/asm-blackfin/arch-bf533/cdefBF533.h index 8c751e6..c72bac9 100644 --- a/include/asm-blackfin/cpu/cdefBF533.h +++ b/include/asm-blackfin/arch-bf533/cdefBF533.h @@ -19,6 +19,6 @@ #ifndef _CDEFBF533_H #define _CDEFBF533_H -#include <asm/cpu/cdefBF532.h> +#include <asm/arch-bf533/cdefBF532.h> #endif /* _CDEFBF533_H */ diff --git a/include/asm-blackfin/arch-bf533/cplbtab.h b/include/asm-blackfin/arch-bf533/cplbtab.h new file mode 100644 index 0000000..89f0325 --- /dev/null +++ b/include/asm-blackfin/arch-bf533/cplbtab.h @@ -0,0 +1,482 @@ +/*This file is subject to the terms and conditions of the GNU General Public + * License. + * + * Blackfin BF533/2.6 support : LG Soft India + * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd + * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's + * shouldn't be victimized. cplbmgr.S search logic is corrected + * to findout the appropriate victim. + * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC + * : LG Soft India + */ +#include <config.h> + +#ifndef __ARCH_BFINNOMMU_CPLBTAB_H +#define __ARCH_BFINNOMMU_CPLBTAB_H + +/************************************************************************* + * ICPLB TABLE + *************************************************************************/ + +.data +/* This table is configurable */ + .align 4; + +/* Data Attibutes*/ + +#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) +#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158 0x200 +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) + +#else /*Write Through */ +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) +#endif + +.align 4; +.global _ipdt_table _ipdt_table:.byte4 0x00000000; +.byte4(SDRAM_IKERNEL); /*SDRAM_Page0 */ +.byte4 0x00400000; +.byte4(SDRAM_IKERNEL); /*SDRAM_Page1 */ +.byte4 0x00800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page2 */ +.byte4 0x00C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page3 */ +.byte4 0x01000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page4 */ +.byte4 0x01400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page5 */ +.byte4 0x01800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page6 */ +.byte4 0x01C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page7 */ +#ifndef CONFIG_EZKIT /*STAMP Memory regions */ +.byte4 0x02000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page8 */ +.byte4 0x02400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page9 */ +.byte4 0x02800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page10 */ +.byte4 0x02C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page11 */ +.byte4 0x03000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page12 */ +.byte4 0x03400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page13 */ +.byte4 0x03800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page14 */ +.byte4 0x03C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page15 */ +#endif +.byte4 0x20000000; +.byte4(SDRAM_EBIU); /* Async Memory Bank 2 (Secnd) */ + +#ifdef CONFIG_STAMP +.byte4 0x04000000; +.byte4(SDRAM_IGENERIC); +.byte4 0x04400000; +.byte4(SDRAM_IGENERIC); +.byte4 0x04800000; +.byte4(SDRAM_IGENERIC); +.byte4 0x04C00000; +.byte4(SDRAM_IGENERIC); +.byte4 0x05000000; +.byte4(SDRAM_IGENERIC); +.byte4 0x05400000; +.byte4(SDRAM_IGENERIC); +.byte4 0x05800000; +.byte4(SDRAM_IGENERIC); +.byte4 0x05C00000; +.byte4(SDRAM_IGENERIC); +.byte4 0x06000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page25 */ +.byte4 0x06400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page26 */ +.byte4 0x06800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page27 */ +.byte4 0x06C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page28 */ +.byte4 0x07000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page29 */ +.byte4 0x07400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page30 */ +.byte4 0x07800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page31 */ +.byte4 0x07C00000; +.byte4(SDRAM_IKERNEL); /*SDRAM_Page32 */ +#endif +.byte4 0xffffffff; /* end of section - termination */ + +/********************************************************************** + * PAGE DESCRIPTOR TABLE + * + **********************************************************************/ + +/* Till here we are discussing about the static memory management model. + * However, the operating envoronments commonly define more CPLB + * descriptors to cover the entire addressable memory than will fit into + * the available on-chip 16 CPLB MMRs. When this happens, the below table + * will be used which will hold all the potentially required CPLB descriptors + * + * This is how Page descriptor Table is implemented in uClinux/Blackfin. + */ +.global _dpdt_table _dpdt_table:.byte4 0x00000000; +.byte4(SDRAM_DKERNEL); /*SDRAM_Page0 */ +.byte4 0x00400000; +.byte4(SDRAM_DKERNEL); /*SDRAM_Page1 */ +.byte4 0x00800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page2 */ +.byte4 0x00C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page3 */ +.byte4 0x01000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page4 */ +.byte4 0x01400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page5 */ +.byte4 0x01800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page6 */ +.byte4 0x01C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page7 */ + +#ifndef CONFIG_EZKIT +.byte4 0x02000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page8 */ +.byte4 0x02400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page9 */ +.byte4 0x02800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page10 */ +.byte4 0x02C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page11 */ +.byte4 0x03000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page12 */ +.byte4 0x03400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page13 */ +.byte4 0x03800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page14 */ +.byte4 0x03C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page15 */ +#endif + +#ifdef CONFIG_STAMP +.byte4 0x04000000; +.byte4(SDRAM_DGENERIC); +.byte4 0x04400000; +.byte4(SDRAM_DGENERIC); +.byte4 0x04800000; +.byte4(SDRAM_DGENERIC); +.byte4 0x04C00000; +.byte4(SDRAM_DGENERIC); +.byte4 0x05000000; +.byte4(SDRAM_DGENERIC); +.byte4 0x05400000; +.byte4(SDRAM_DGENERIC); +.byte4 0x05800000; +.byte4(SDRAM_DGENERIC); +.byte4 0x05C00000; +.byte4(SDRAM_DGENERIC); +.byte4 0x06000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page25 */ +.byte4 0x06400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page26 */ +.byte4 0x06800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page27 */ +.byte4 0x06C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page28 */ +.byte4 0x07000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page29 */ +.byte4 0x07400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page30 */ +.byte4 0x07800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page31 */ +.byte4 0x07C00000; +.byte4(SDRAM_DKERNEL); /*SDRAM_Page32 */ +#endif + +.byte4 0x20000000; +.byte4(SDRAM_EBIU); /* Async Memory Bank 0 (Prim A) */ + +#if (BFIN_CPU == ADSP_BF533) +.byte4 0xFF800000; +.byte4(L1_DMEMORY); +.byte4 0xFF801000; +.byte4(L1_DMEMORY); +.byte4 0xFF802000; +.byte4(L1_DMEMORY); +.byte4 0xFF803000; +.byte4(L1_DMEMORY); +#endif +.byte4 0xFF804000; +.byte4(L1_DMEMORY); +.byte4 0xFF805000; +.byte4(L1_DMEMORY); +.byte4 0xFF806000; +.byte4(L1_DMEMORY); +.byte4 0xFF807000; +.byte4(L1_DMEMORY); +#if (BFIN_CPU == ADSP_BF533) +.byte4 0xFF900000; +.byte4(L1_DMEMORY); +.byte4 0xFF901000; +.byte4(L1_DMEMORY); +.byte4 0xFF902000; +.byte4(L1_DMEMORY); +.byte4 0xFF903000; +.byte4(L1_DMEMORY); +#endif +#if ((BFIN_CPU == ADSP_BF532) || (BFIN_CPU == ADSP_BF533)) +.byte4 0xFF904000; +.byte4(L1_DMEMORY); +.byte4 0xFF905000; +.byte4(L1_DMEMORY); +.byte4 0xFF906000; +.byte4(L1_DMEMORY); +.byte4 0xFF907000; +.byte4(L1_DMEMORY); +#endif +.byte4 0xFFB00000; +.byte4(L1_DMEMORY); + +.byte4 0xffffffff; /*end of section - termination */ + +#ifdef CONFIG_CPLB_INFO +.global _ipdt_swapcount_table; /* swapin count first, then swapout count */ +_ipdt_swapcount_table: +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 10 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 20 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 30 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 40 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 50 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 60 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 70 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 90 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 100 */ + +.global _dpdt_swapcount_table; /* swapin count first, then swapout count */ +_dpdt_swapcount_table: +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 10 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 20 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 30 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 40 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 50 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 60 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 70 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 100 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 110 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 120 */ +#endif + +#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/cpu/defBF531.h b/include/asm-blackfin/arch-bf533/defBF531.h index 6c7cd5a..6c7cd5a 100644 --- a/include/asm-blackfin/cpu/defBF531.h +++ b/include/asm-blackfin/arch-bf533/defBF531.h diff --git a/include/asm-blackfin/cpu/defBF532.h b/include/asm-blackfin/arch-bf533/defBF532.h index 26a5fe6..25a74e6 100644 --- a/include/asm-blackfin/cpu/defBF532.h +++ b/include/asm-blackfin/arch-bf533/defBF532.h @@ -28,7 +28,7 @@ */ /* include all Core registers and bit definitions */ -#include <asm/cpu/def_LPBlackfin.h> +#include <asm/arch-common/def_LPBlackfin.h> /* Helper macros * usage: @@ -51,7 +51,7 @@ #define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ #define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ #define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ -#define CHIPID 0xFFC00014 /* Chip ID register (32-bit) */ +#define CHIPID 0xFFC00014 /* Chip ID register (32-bit) */ #define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ #define SYSCR 0xFFC00104 /* System Configuration register */ @@ -88,7 +88,7 @@ #define UART_LCR 0xFFC0040C /* Line Control Register */ #define UART_MCR 0xFFC00410 /* Modem Control Register */ #define UART_LSR 0xFFC00414 /* Line Status Register */ -/* #define UART_MSR 0xFFC00418 */ /* Modem Status Register (UNUSED in ADSP-BF532) */ +/* #define UART_MSR 0xFFC00418 */ /* Modem Status Register (UNUSED in ADSP-BF532) */ #define UART_SCR 0xFFC0041C /* SCR Scratch Register */ #define UART_GCTL 0xFFC00424 /* Global Control Register */ @@ -405,7 +405,7 @@ #define BYPASS 0x00000100 /* Bypass the PLL */ /* PLL_DIV Masks */ -#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ #define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ #define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ @@ -420,7 +420,7 @@ */ /* SIC_IAR0 Masks */ -#define P0_IVG(x) ((x)-7) /* Peripheral #0 assigned IVG #x */ +#define P0_IVG(x) ((x)-7) /* Peripheral #0 assigned IVG #x */ #define P1_IVG(x) ((x)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ #define P2_IVG(x) ((x)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ #define P3_IVG(x) ((x)-7) << 0xC /* Peripheral #3 assigned IVG #x */ @@ -430,7 +430,7 @@ #define P7_IVG(x) ((x)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ /* SIC_IAR1 Masks */ -#define P8_IVG(x) ((x)-7) /* Peripheral #8 assigned IVG #x */ +#define P8_IVG(x) ((x)-7) /* Peripheral #8 assigned IVG #x */ #define P9_IVG(x) ((x)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ #define P10_IVG(x) ((x)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ #define P11_IVG(x) ((x)-7) << 0xC /* Peripheral #11 assigned IVG #x */ @@ -440,7 +440,7 @@ #define P15_IVG(x) ((x)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ /* SIC_IAR2 Masks */ -#define P16_IVG(x) ((x)-7) /* Peripheral #16 assigned IVG #x */ +#define P16_IVG(x) ((x)-7) /* Peripheral #16 assigned IVG #x */ #define P17_IVG(x) ((x)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ #define P18_IVG(x) ((x)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ #define P19_IVG(x) ((x)-7) << 0xC /* Peripheral #19 assigned IVG #x */ @@ -486,25 +486,25 @@ #define RTDAY 0xFFFE0000 /* Real-Time Clock Days */ /* RTC_ICTL register */ -#define SWIE 0x0001 /* Stopwatch Interrupt Enable */ -#define AIE 0x0002 /* Alarm Interrupt Enable */ -#define SIE 0x0004 /* Seconds (1 Hz) Interrupt Enable */ -#define MIE 0x0008 /* Minutes Interrupt Enable */ -#define HIE 0x0010 /* Hours Interrupt Enable */ -#define DIE 0x0020 /* 24 Hours (Days) Interrupt Enable */ -#define DAIE 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ -#define WCIE 0x8000 /* Write Complete Interrupt Enable */ +#define SWIE 0x0001 /* Stopwatch Interrupt Enable */ +#define AIE 0x0002 /* Alarm Interrupt Enable */ +#define SIE 0x0004 /* Seconds (1 Hz) Interrupt Enable */ +#define MIE 0x0008 /* Minutes Interrupt Enable */ +#define HIE 0x0010 /* Hours Interrupt Enable */ +#define DIE 0x0020 /* 24 Hours (Days) Interrupt Enable */ +#define DAIE 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ +#define WCIE 0x8000 /* Write Complete Interrupt Enable */ /* RTC_ISTAT register */ -#define SWEF 0x0001 /* Stopwatch Event Flag */ -#define AEF 0x0002 /* Alarm Event Flag */ -#define SEF 0x0004 /* Seconds (1 Hz) Event Flag */ -#define MEF 0x0008 /* Minutes Event Flag */ -#define HEF 0x0010 /* Hours Event Flag */ -#define DEF 0x0020 /* 24 Hours (Days) Event Flag */ -#define DAEF 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Event Flag */ -#define WPS 0x4000 /* Write Pending Status (RO) */ -#define WCOM 0x8000 /* Write Complete */ +#define SWEF 0x0001 /* Stopwatch Event Flag */ +#define AEF 0x0002 /* Alarm Event Flag */ +#define SEF 0x0004 /* Seconds (1 Hz) Event Flag */ +#define MEF 0x0008 /* Minutes Event Flag */ +#define HEF 0x0010 /* Hours Event Flag */ +#define DEF 0x0020 /* 24 Hours (Days) Event Flag */ +#define DAEF 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Event Flag */ +#define WPS 0x4000 /* Write Pending Status (RO) */ +#define WCOM 0x8000 /* Write Complete */ /* RTC_FAST Mask (RTC_PREN Mask) */ #define ENABLE_PRESCALE 0x00000001 /* Enable prescaler so RTC runs at 1 Hz */ @@ -588,50 +588,50 @@ * SERIAL PORT MASKS */ /* SPORTx_TCR1 Masks */ -#define TSPEN 0x0001 /* TX enable */ -#define ITCLK 0x0002 /* Internal TX Clock Select */ -#define TDTYPE 0x000C /* TX Data Formatting Select */ -#define TLSBIT 0x0010 /* TX Bit Order */ -#define ITFS 0x0200 /* Internal TX Frame Sync Select */ -#define TFSR 0x0400 /* TX Frame Sync Required Select */ -#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ -#define LTFS 0x1000 /* Low TX Frame Sync Select */ -#define LATFS 0x2000 /* Late TX Frame Sync Select */ -#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ /* SPORTx_TCR2 Masks */ -#define SLEN 0x001F /*TX Word Length */ -#define TXSE 0x0100 /*TX Secondary Enable */ -#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ -#define TRFST 0x0400 /*TX Right-First Data Order */ +#define SLEN 0x001F /*TX Word Length */ +#define TXSE 0x0100 /*TX Secondary Enable */ +#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /*TX Right-First Data Order */ /* SPORTx_RCR1 Masks */ -#define RSPEN 0x0001 /* RX enable */ -#define IRCLK 0x0002 /* Internal RX Clock Select */ -#define RDTYPE 0x000C /* RX Data Formatting Select */ -#define RULAW 0x0008 /* u-Law enable */ -#define RALAW 0x000C /* A-Law enable */ -#define RLSBIT 0x0010 /* RX Bit Order */ -#define IRFS 0x0200 /* Internal RX Frame Sync Select */ -#define RFSR 0x0400 /* RX Frame Sync Required Select */ -#define LRFS 0x1000 /* Low RX Frame Sync Select */ -#define LARFS 0x2000 /* Late RX Frame Sync Select */ -#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define RULAW 0x0008 /* u-Law enable */ +#define RALAW 0x000C /* A-Law enable */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ /* SPORTx_RCR2 Masks */ -#define SLEN 0x001F /* RX Word Length */ -#define RXSE 0x0100 /* RX Secondary Enable */ -#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ -#define RRFST 0x0400 /* Right-First Data Order */ +#define SLEN 0x001F /* RX Word Length */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ /* SPORTx_STAT Masks */ -#define RXNE 0x0001 /* RX FIFO Not Empty Status */ -#define RUVF 0x0002 /* RX Underflow Status */ -#define ROVF 0x0004 /* RX Overflow Status */ -#define TXF 0x0008 /* TX FIFO Full Status */ -#define TUVF 0x0010 /* TX Underflow Status */ -#define TOVF 0x0020 /* TX Overflow Status */ -#define TXHRE 0x0040 /* TX Hold Register Empty */ +#define RXNE 0x0001 /* RX FIFO Not Empty Status */ +#define RUVF 0x0002 /* RX Underflow Status */ +#define ROVF 0x0004 /* RX Overflow Status */ +#define TXF 0x0008 /* TX FIFO Full Status */ +#define TUVF 0x0010 /* TX Underflow Status */ +#define TOVF 0x0020 /* TX Overflow Status */ +#define TXHRE 0x0040 /* TX Hold Register Empty */ /* SPORTx_MCMC1 Masks */ #define WSIZE 0x0000F000 /* Multichannel Window Size Field */ @@ -660,7 +660,7 @@ #define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ #define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ #define DLENGTH 0x00003800 /* PPI Data Length */ -#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ +#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ #define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ #define POL 0x0000C000 /* PPI Signal Polarities */ @@ -689,12 +689,12 @@ #define NDSIZE 0x00000900 /* Next Descriptor Size */ #define FLOW 0x00007000 /* Flow Control */ -#define DMAEN_P 0 /* Channel Enable */ -#define WNR_P 1 /* Channel Direction (W/R*) */ -#define DMA2D_P 4 /* 2D/1D* Mode */ -#define RESTART_P 5 /* Restart */ -#define DI_SEL_P 6 /* Data Interrupt Select */ -#define DI_EN_P 7 /* Data Interrupt Enable */ +#define DMAEN_P 0 /* Channel Enable */ +#define WNR_P 1 /* Channel Direction (W/R*) */ +#define DMA2D_P 4 /* 2D/1D* Mode */ +#define RESTART_P 5 /* Restart */ +#define DI_SEL_P 6 /* Data Interrupt Select */ +#define DI_EN_P 7 /* Data Interrupt Enable */ /* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ #define DMA_DONE 0x00000001 /* DMA Done Indicator */ @@ -702,14 +702,14 @@ #define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ #define DMA_RUN 0x00000008 /* DMA Running Indicator */ -#define DMA_DONE_P 0 /* DMA Done Indicator */ -#define DMA_ERR_P 1 /* DMA Error Indicator */ -#define DFETCH_P 2 /* Descriptor Fetch Indicator */ -#define DMA_RUN_P 3 /* DMA Running Indicator */ +#define DMA_DONE_P 0 /* DMA Done Indicator */ +#define DMA_ERR_P 1 /* DMA Error Indicator */ +#define DFETCH_P 2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 3 /* DMA Running Indicator */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x00000040 /* DMA Channel Type Indicator */ -#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ #define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ #define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ #define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ @@ -1156,4 +1156,4 @@ #define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ #define BGSTAT 0x00000020 /* Bus granted */ -#endif /* _DEF_BF532_H */ +#endif /* _DEF_BF532_H */ diff --git a/include/asm-blackfin/cpu/defBF533.h b/include/asm-blackfin/arch-bf533/defBF533.h index 90e50af..90e50af 100644 --- a/include/asm-blackfin/cpu/defBF533.h +++ b/include/asm-blackfin/arch-bf533/defBF533.h diff --git a/include/asm-blackfin/cpu/defBF533_extn.h b/include/asm-blackfin/arch-bf533/defBF533_extn.h index a9a1c7c..045e8e4 100644 --- a/include/asm-blackfin/cpu/defBF533_extn.h +++ b/include/asm-blackfin/arch-bf533/defBF533_extn.h @@ -19,9 +19,10 @@ #ifndef _DEF_BF533_EXTN_H #define _DEF_BF533_EXTN_H -#define OFFSET_( x ) ((x) & 0x0000FFFF) /* define macro for offset */ +/* define macro for offset */ +#define OFFSET_( x ) ((x) & 0x0000FFFF) /* Delay inserted for PLL transition */ -#define DELAY 0x1000 +#define PLL_DELAY 0x1000 #define L1_ISRAM 0xFFA00000 #define L1_ISRAM_END 0xFFA10000 diff --git a/include/asm-blackfin/cpu/bf533_irq.h b/include/asm-blackfin/arch-bf533/irq.h index 9c5230d..9c5230d 100644 --- a/include/asm-blackfin/cpu/bf533_irq.h +++ b/include/asm-blackfin/arch-bf533/irq.h diff --git a/include/asm-blackfin/arch-bf537/anomaly.h b/include/asm-blackfin/arch-bf537/anomaly.h new file mode 100644 index 0000000..50b44da --- /dev/null +++ b/include/asm-blackfin/arch-bf537/anomaly.h @@ -0,0 +1,116 @@ +/* + * File: include/asm-blackfin/arch-bf537/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* This file shoule be up to date with: + * - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List + * - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List + * - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1)) +#error Kernel will not work on BF537/6/4 Version 0.1 +#endif + +#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive + Channel DMA stops */ +#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR + registers. */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits */ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is + Changed */ +#endif +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + SPORT external receive and transmit clocks. */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic + control */ +#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when + killed in a particular stage */ +#endif + +#if defined(CONFIG_BF_REV_0_2) +#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or + IDLE around a Change of Control causes + unpredictable results */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */ +#endif +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event + interrupt not functional */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */ +#endif +#define ANOMALY_05000257 /* An interrupt or exception during short Hardware + loops may cause the instruction fetch unit to + malfunction */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of + the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ +#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE + instruction will cause an infinite stall in the + second to last instruction in a hardware loop */ +#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running + and non-zero DEB_TRAFFIC_PERIOD value */ +#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000280 /* SPI Master boot mode does not work well with + Atmel Dataflash devices */ + +#endif /* CONFIG_BF_REV_0_2 */ + +#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/arch-bf537/bf537_serial.h b/include/asm-blackfin/arch-bf537/bf537_serial.h new file mode 100644 index 0000000..1610411 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/bf537_serial.h @@ -0,0 +1,78 @@ +/* + * U-boot bf537_serial.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF537_SERIAL_H_ +#define _BF537_SERIAL_H_ + +#define BYTE_REF(addr) (*((volatile char*)addr)) +#define HALFWORD_REF(addr) (*((volatile short*)addr)) +#define WORD_REF(addr) (*((volatile long*)addr)) + +#define UART_THR_LO HALFWORD_REF(UART_THR) +#define UART_RBR_LO HALFWORD_REF(UART_RBR) +#define UART_DLL_LO HALFWORD_REF(UART_DLL) +#define UART_IER_LO HALFWORD_REF(UART_IER) +#define UART_IER_ERBFI 0x01 +#define UART_IER_ETBEI 0x02 +#define UART_IER_ELSI 0x04 +#define UART_IER_EDDSI 0x08 + +#define UART_DLH_LO HALFWORD_REF(UART_DLH) +#define UART_IIR_LO HALFWORD_REF(UART_IIR) +#define UART_IIR_NOINT 0x01 +#define UART_IIR_STATUS 0x06 +#define UART_IIR_LSR 0x06 +#define UART_IIR_RBR 0x04 +#define UART_IIR_THR 0x02 +#define UART_IIR_MSR 0x00 + +#define UART_LCR_LO HALFWORD_REF(UART_LCR) +#define UART_LCR_WLS5 0 +#define UART_LCR_WLS6 0x01 +#define UART_LCR_WLS7 0x02 +#define UART_LCR_WLS8 0x03 +#define UART_LCR_STB 0x04 +#define UART_LCR_PEN 0x08 +#define UART_LCR_EPS 0x10 +#define UART_LCR_SP 0x20 +#define UART_LCR_SB 0x40 +#define UART_LCR_DLAB 0x80 + +#define UART_MCR_LO HALFWORD_REF(UART_MCR) + +#define UART_LSR_LO HALFWORD_REF(UART_LSR) +#define UART_LSR_DR 0x01 +#define UART_LSR_OE 0x02 +#define UART_LSR_PE 0x04 +#define UART_LSR_FE 0x08 +#define UART_LSR_BI 0x10 +#define UART_LSR_THRE 0x20 +#define UART_LSR_TEMT 0x40 + +#define UART_MSR_LO HALFWORD_REF(UART_MSR) +#define UART_SCR_LO HALFWORD_REF(UART_SCR) +#define UART_GCTL_LO HALFWORD_REF(UART_GCTL) +#define UART_GCTL_UCEN 0x01 + +#endif diff --git a/include/asm-blackfin/arch-bf537/bf5xx_rtc.h b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h new file mode 100644 index 0000000..0043e42 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h @@ -0,0 +1,46 @@ +/* + * U-boot - bf537_rtc.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF537_RTC_H_ +#define _BF537_RTC_H_ + +void rtc_init(void); +void wait_for_complete(void); +void rtc_reset(void); + +#define MIN_TO_SECS(_x_) (60 * _x_) +#define HRS_TO_SECS(_x_) (60 * 60 * _x_) +#define DAYS_TO_SECS(_x_) (24 * 60 * 60 * _x_) + +#define NUM_SECS_IN_DAY (24 * 3600) +#define NUM_SECS_IN_HOUR (3600) +#define NUM_SECS_IN_MIN (60) + +/* Shift values for RTC_STAT register */ +#define DAY_BITS_OFF 17 +#define HOUR_BITS_OFF 12 +#define MIN_BITS_OFF 6 +#define SEC_BITS_OFF 0 + +#endif diff --git a/include/asm-blackfin/arch-bf537/cdefBF534.h b/include/asm-blackfin/arch-bf537/cdefBF534.h new file mode 100644 index 0000000..5a89e92 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/cdefBF534.h @@ -0,0 +1,1009 @@ +/* + * Copyright (C) 2005 Analog Devices Inc., All Rights Reserved. + * + *********************************************************************************** + * + * This include file contains a list of macro "defines" to enable the programmer + * to use symbolic names for register-access. + * + * ---------------------------- + * revision 0.1 + * date: 2005/01/27 14:31:01; author: joeb + * Initial revision + */ + +/* + * System MMR Register Map + */ + +#ifndef _CDEF_BF534_H +#define _CDEF_BF534_H + +/* Include all Core registers and bit definitions */ +#include <asm/arch-bf537/defBF534.h> + +/* Include core specific register pointer definitions */ +#include <asm/arch-common/cdef_LPBlackfin.h> + +#define pCHIPID ((volatile unsigned long *)CHIPID) + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define pPLL_CTL ((volatile unsigned short *)PLL_CTL) +#define pPLL_DIV ((volatile unsigned short *)PLL_DIV) +#define pVR_CTL ((volatile unsigned short *)VR_CTL) +#define pPLL_STAT ((volatile unsigned short *)PLL_STAT) +#define pPLL_LOCKCNT ((volatile unsigned short *)PLL_LOCKCNT) + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define pSWRST ((volatile unsigned short *)SWRST) +#define pSYSCR ((volatile unsigned short *)SYSCR) +#define pSIC_RVECT ((void * volatile *)SIC_RVECT) +#define pSIC_IMASK ((volatile unsigned long *)SIC_IMASK) +#define pSIC_IAR0 ((volatile unsigned long *)SIC_IAR0) +#define pSIC_IAR1 ((volatile unsigned long *)SIC_IAR1) +#define pSIC_IAR2 ((volatile unsigned long *)SIC_IAR2) +#define pSIC_IAR3 ((volatile unsigned long *)SIC_IAR3) +#define pSIC_ISR ((volatile unsigned long *)SIC_ISR) +#define pSIC_IWR ((volatile unsigned long *)SIC_IWR) + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define pWDOG_CTL ((volatile unsigned short *)WDOG_CTL) +#define pWDOG_CNT ((volatile unsigned long *)WDOG_CNT) +#define pWDOG_STAT ((volatile unsigned long *)WDOG_STAT) + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define pRTC_STAT ((volatile unsigned long *)RTC_STAT) +#define pRTC_ICTL ((volatile unsigned short *)RTC_ICTL) +#define pRTC_ISTAT ((volatile unsigned short *)RTC_ISTAT) +#define pRTC_SWCNT ((volatile unsigned short *)RTC_SWCNT) +#define pRTC_ALARM ((volatile unsigned long *)RTC_ALARM) +#define pRTC_FAST ((volatile unsigned short *)RTC_FAST) +#define pRTC_PREN ((volatile unsigned short *)RTC_PREN) + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define pUART0_THR ((volatile unsigned short *)UART0_THR) +#define pUART0_RBR ((volatile unsigned short *)UART0_RBR) +#define pUART0_DLL ((volatile unsigned short *)UART0_DLL) +#define pUART0_IER ((volatile unsigned short *)UART0_IER) +#define pUART0_DLH ((volatile unsigned short *)UART0_DLH) +#define pUART0_IIR ((volatile unsigned short *)UART0_IIR) +#define pUART0_LCR ((volatile unsigned short *)UART0_LCR) +#define pUART0_MCR ((volatile unsigned short *)UART0_MCR) +#define pUART0_LSR ((volatile unsigned short *)UART0_LSR) +#define pUART0_MSR ((volatile unsigned short *)UART0_LSR) +#define pUART0_SCR ((volatile unsigned short *)UART0_SCR) +#define pUART0_GCTL ((volatile unsigned short *)UART0_GCTL) + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define pSPI_CTL ((volatile unsigned short *)SPI_CTL) +#define pSPI_FLG ((volatile unsigned short *)SPI_FLG) +#define pSPI_STAT ((volatile unsigned short *)SPI_STAT) +#define pSPI_TDBR ((volatile unsigned short *)SPI_TDBR) +#define pSPI_RDBR ((volatile unsigned short *)SPI_RDBR) +#define pSPI_BAUD ((volatile unsigned short *)SPI_BAUD) +#define pSPI_SHADOW ((volatile unsigned short *)SPI_SHADOW) + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define pTIMER0_CONFIG ((volatile unsigned short *)TIMER0_CONFIG) +#define pTIMER0_COUNTER ((volatile unsigned long *)TIMER0_COUNTER) +#define pTIMER0_PERIOD ((volatile unsigned long *)TIMER0_PERIOD) +#define pTIMER0_WIDTH ((volatile unsigned long *)TIMER0_WIDTH) + +#define pTIMER1_CONFIG ((volatile unsigned short *)TIMER1_CONFIG) +#define pTIMER1_COUNTER ((volatile unsigned long *)TIMER1_COUNTER) +#define pTIMER1_PERIOD ((volatile unsigned long *)TIMER1_PERIOD) +#define pTIMER1_WIDTH ((volatile unsigned long *)TIMER1_WIDTH) + +#define pTIMER2_CONFIG ((volatile unsigned short *)TIMER2_CONFIG) +#define pTIMER2_COUNTER ((volatile unsigned long *)TIMER2_COUNTER) +#define pTIMER2_PERIOD ((volatile unsigned long *)TIMER2_PERIOD) +#define pTIMER2_WIDTH ((volatile unsigned long *)TIMER2_WIDTH) + +#define pTIMER3_CONFIG ((volatile unsigned short *)TIMER3_CONFIG) +#define pTIMER3_COUNTER ((volatile unsigned long *)TIMER3_COUNTER) +#define pTIMER3_PERIOD ((volatile unsigned long *)TIMER3_PERIOD) +#define pTIMER3_WIDTH ((volatile unsigned long *)TIMER3_WIDTH) + +#define pTIMER4_CONFIG ((volatile unsigned short *)TIMER4_CONFIG) +#define pTIMER4_COUNTER ((volatile unsigned long *)TIMER4_COUNTER) +#define pTIMER4_PERIOD ((volatile unsigned long *)TIMER4_PERIOD) +#define pTIMER4_WIDTH ((volatile unsigned long *)TIMER4_WIDTH) + +#define pTIMER5_CONFIG ((volatile unsigned short *)TIMER5_CONFIG) +#define pTIMER5_COUNTER ((volatile unsigned long *)TIMER5_COUNTER) +#define pTIMER5_PERIOD ((volatile unsigned long *)TIMER5_PERIOD) +#define pTIMER5_WIDTH ((volatile unsigned long *)TIMER5_WIDTH) + +#define pTIMER6_CONFIG ((volatile unsigned short *)TIMER6_CONFIG) +#define pTIMER6_COUNTER ((volatile unsigned long *)TIMER6_COUNTER) +#define pTIMER6_PERIOD ((volatile unsigned long *)TIMER6_PERIOD) +#define pTIMER6_WIDTH ((volatile unsigned long *)TIMER6_WIDTH) + +#define pTIMER7_CONFIG ((volatile unsigned short *)TIMER7_CONFIG) +#define pTIMER7_COUNTER ((volatile unsigned long *)TIMER7_COUNTER) +#define pTIMER7_PERIOD ((volatile unsigned long *)TIMER7_PERIOD) +#define pTIMER7_WIDTH ((volatile unsigned long *)TIMER7_WIDTH) + +#define pTIMER_ENABLE ((volatile unsigned short *)TIMER_ENABLE) +#define pTIMER_DISABLE ((volatile unsigned short *)TIMER_DISABLE) +#define pTIMER_STATUS ((volatile unsigned long *)TIMER_STATUS) + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define pPORTFIO ((volatile unsigned short *)PORTFIO) +#define pPORTFIO_CLEAR ((volatile unsigned short *)PORTFIO_CLEAR) +#define pPORTFIO_SET ((volatile unsigned short *)PORTFIO_SET) +#define pPORTFIO_TOGGLE ((volatile unsigned short *)PORTFIO_TOGGLE) +#define pPORTFIO_MASKA ((volatile unsigned short *)PORTFIO_MASKA) +#define pPORTFIO_MASKA_CLEAR ((volatile unsigned short *)PORTFIO_MASKA_CLEAR) +#define pPORTFIO_MASKA_SET ((volatile unsigned short *)PORTFIO_MASKA_SET) +#define pPORTFIO_MASKA_TOGGLE ((volatile unsigned short *)PORTFIO_MASKA_TOGGLE) +#define pPORTFIO_MASKB ((volatile unsigned short *)PORTFIO_MASKB) +#define pPORTFIO_MASKB_CLEAR ((volatile unsigned short *)PORTFIO_MASKB_CLEAR) +#define pPORTFIO_MASKB_SET ((volatile unsigned short *)PORTFIO_MASKB_SET) +#define pPORTFIO_MASKB_TOGGLE ((volatile unsigned short *)PORTFIO_MASKB_TOGGLE) +#define pPORTFIO_DIR ((volatile unsigned short *)PORTFIO_DIR) +#define pPORTFIO_POLAR ((volatile unsigned short *)PORTFIO_POLAR) +#define pPORTFIO_EDGE ((volatile unsigned short *)PORTFIO_EDGE) +#define pPORTFIO_BOTH ((volatile unsigned short *)PORTFIO_BOTH) +#define pPORTFIO_INEN ((volatile unsigned short *)PORTFIO_INEN) + +#define pFIO_DIR pPORTFIO_DIR +#define pFIO_FLAG_C pPORTFIO_CLEAR +#define pFIO_FLAG_S pPORTFIO_SET +#define pFIO_INEN pPORTFIO_INEN +#define pFIO_FLAG_D pPORTFIO + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define pSPORT0_TCR1 ((volatile unsigned short *)SPORT0_TCR1) +#define pSPORT0_TCR2 ((volatile unsigned short *)SPORT0_TCR2) +#define pSPORT0_TCLKDIV ((volatile unsigned short *)SPORT0_TCLKDIV) +#define pSPORT0_TFSDIV ((volatile unsigned short *)SPORT0_TFSDIV) +#define pSPORT0_TX ((volatile unsigned long *)SPORT0_TX) +#define pSPORT0_RX ((volatile unsigned long *)SPORT0_RX) +#define pSPORT0_TX32 ((volatile unsigned long *)SPORT0_TX) +#define pSPORT0_RX32 ((volatile unsigned long *)SPORT0_RX) +#define pSPORT0_TX16 ((volatile unsigned short *)SPORT0_TX) +#define pSPORT0_RX16 ((volatile unsigned short *)SPORT0_RX) +#define pSPORT0_RCR1 ((volatile unsigned short *)SPORT0_RCR1) +#define pSPORT0_RCR2 ((volatile unsigned short *)SPORT0_RCR2) +#define pSPORT0_RCLKDIV ((volatile unsigned short *)SPORT0_RCLKDIV) +#define pSPORT0_RFSDIV ((volatile unsigned short *)SPORT0_RFSDIV) +#define pSPORT0_STAT ((volatile unsigned short *)SPORT0_STAT) +#define pSPORT0_CHNL ((volatile unsigned short *)SPORT0_CHNL) +#define pSPORT0_MCMC1 ((volatile unsigned short *)SPORT0_MCMC1) +#define pSPORT0_MCMC2 ((volatile unsigned short *)SPORT0_MCMC2) +#define pSPORT0_MTCS0 ((volatile unsigned long *)SPORT0_MTCS0) +#define pSPORT0_MTCS1 ((volatile unsigned long *)SPORT0_MTCS1) +#define pSPORT0_MTCS2 ((volatile unsigned long *)SPORT0_MTCS2) +#define pSPORT0_MTCS3 ((volatile unsigned long *)SPORT0_MTCS3) +#define pSPORT0_MRCS0 ((volatile unsigned long *)SPORT0_MRCS0) +#define pSPORT0_MRCS1 ((volatile unsigned long *)SPORT0_MRCS1) +#define pSPORT0_MRCS2 ((volatile unsigned long *)SPORT0_MRCS2) +#define pSPORT0_MRCS3 ((volatile unsigned long *)SPORT0_MRCS3) + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define pSPORT1_TCR1 ((volatile unsigned short *)SPORT1_TCR1) +#define pSPORT1_TCR2 ((volatile unsigned short *)SPORT1_TCR2) +#define pSPORT1_TCLKDIV ((volatile unsigned short *)SPORT1_TCLKDIV) +#define pSPORT1_TFSDIV ((volatile unsigned short *)SPORT1_TFSDIV) +#define pSPORT1_TX ((volatile unsigned long *)SPORT1_TX) +#define pSPORT1_RX ((volatile unsigned long *)SPORT1_RX) +#define pSPORT1_TX32 ((volatile unsigned long *)SPORT1_TX) +#define pSPORT1_RX32 ((volatile unsigned long *)SPORT1_RX) +#define pSPORT1_TX16 ((volatile unsigned short *)SPORT1_TX) +#define pSPORT1_RX16 ((volatile unsigned short *)SPORT1_RX) +#define pSPORT1_RCR1 ((volatile unsigned short *)SPORT1_RCR1) +#define pSPORT1_RCR2 ((volatile unsigned short *)SPORT1_RCR2) +#define pSPORT1_RCLKDIV ((volatile unsigned short *)SPORT1_RCLKDIV) +#define pSPORT1_RFSDIV ((volatile unsigned short *)SPORT1_RFSDIV) +#define pSPORT1_STAT ((volatile unsigned short *)SPORT1_STAT) +#define pSPORT1_CHNL ((volatile unsigned short *)SPORT1_CHNL) +#define pSPORT1_MCMC1 ((volatile unsigned short *)SPORT1_MCMC1) +#define pSPORT1_MCMC2 ((volatile unsigned short *)SPORT1_MCMC2) +#define pSPORT1_MTCS0 ((volatile unsigned long *)SPORT1_MTCS0) +#define pSPORT1_MTCS1 ((volatile unsigned long *)SPORT1_MTCS1) +#define pSPORT1_MTCS2 ((volatile unsigned long *)SPORT1_MTCS2) +#define pSPORT1_MTCS3 ((volatile unsigned long *)SPORT1_MTCS3) +#define pSPORT1_MRCS0 ((volatile unsigned long *)SPORT1_MRCS0) +#define pSPORT1_MRCS1 ((volatile unsigned long *)SPORT1_MRCS1) +#define pSPORT1_MRCS2 ((volatile unsigned long *)SPORT1_MRCS2) +#define pSPORT1_MRCS3 ((volatile unsigned long *)SPORT1_MRCS3) + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define pEBIU_AMGCTL ((volatile unsigned short *)EBIU_AMGCTL) +#define pEBIU_AMBCTL0 ((volatile unsigned long *)EBIU_AMBCTL0) +#define pEBIU_AMBCTL1 ((volatile unsigned long *)EBIU_AMBCTL1) +#define pEBIU_SDGCTL ((volatile unsigned long *)EBIU_SDGCTL) +#define pEBIU_SDBCTL ((volatile unsigned short *)EBIU_SDBCTL) +#define pEBIU_SDRRC ((volatile unsigned short *)EBIU_SDRRC) +#define pEBIU_SDSTAT ((volatile unsigned short *)EBIU_SDSTAT) + +/* DMA Traffic Control Registers */ +#define pDMA_TCPER ((volatile unsigned short *)DMA_TCPER) +#define pDMA_TCCNT ((volatile unsigned short *)DMA_TCCNT) + +/* DMA Controller */ +#define pDMA0_CONFIG ((volatile unsigned short *)DMA0_CONFIG) +#define pDMA0_NEXT_DESC_PTR ((void * volatile *)DMA0_NEXT_DESC_PTR) +#define pDMA0_START_ADDR ((void * volatile *)DMA0_START_ADDR) +#define pDMA0_X_COUNT ((volatile unsigned short *)DMA0_X_COUNT) +#define pDMA0_Y_COUNT ((volatile unsigned short *)DMA0_Y_COUNT) +#define pDMA0_X_MODIFY ((volatile signed short *)DMA0_X_MODIFY) +#define pDMA0_Y_MODIFY ((volatile signed short *)DMA0_Y_MODIFY) +#define pDMA0_CURR_DESC_PTR ((void * volatile *)DMA0_CURR_DESC_PTR) +#define pDMA0_CURR_ADDR ((void * volatile *)DMA0_CURR_ADDR) +#define pDMA0_CURR_X_COUNT ((volatile unsigned short *)DMA0_CURR_X_COUNT) +#define pDMA0_CURR_Y_COUNT ((volatile unsigned short *)DMA0_CURR_Y_COUNT) +#define pDMA0_IRQ_STATUS ((volatile unsigned short *)DMA0_IRQ_STATUS) +#define pDMA0_PERIPHERAL_MAP ((volatile unsigned short *)DMA0_PERIPHERAL_MAP) + +#define pDMA1_CONFIG ((volatile unsigned short *)DMA1_CONFIG) +#define pDMA1_NEXT_DESC_PTR ((void * volatile *)DMA1_NEXT_DESC_PTR) +#define pDMA1_START_ADDR ((void * volatile *)DMA1_START_ADDR) +#define pDMA1_X_COUNT ((volatile unsigned short *)DMA1_X_COUNT) +#define pDMA1_Y_COUNT ((volatile unsigned short *)DMA1_Y_COUNT) +#define pDMA1_X_MODIFY ((volatile signed short *)DMA1_X_MODIFY) +#define pDMA1_Y_MODIFY ((volatile signed short *)DMA1_Y_MODIFY) +#define pDMA1_CURR_DESC_PTR ((void * volatile *)DMA1_CURR_DESC_PTR) +#define pDMA1_CURR_ADDR ((void * volatile *)DMA1_CURR_ADDR) +#define pDMA1_CURR_X_COUNT ((volatile unsigned short *)DMA1_CURR_X_COUNT) +#define pDMA1_CURR_Y_COUNT ((volatile unsigned short *)DMA1_CURR_Y_COUNT) +#define pDMA1_IRQ_STATUS ((volatile unsigned short *)DMA1_IRQ_STATUS) +#define pDMA1_PERIPHERAL_MAP ((volatile unsigned short *)DMA1_PERIPHERAL_MAP) + +#define pDMA2_CONFIG ((volatile unsigned short *)DMA2_CONFIG) +#define pDMA2_NEXT_DESC_PTR ((void * volatile *)DMA2_NEXT_DESC_PTR) +#define pDMA2_START_ADDR ((void * volatile *)DMA2_START_ADDR) +#define pDMA2_X_COUNT ((volatile unsigned short *)DMA2_X_COUNT) +#define pDMA2_Y_COUNT ((volatile unsigned short *)DMA2_Y_COUNT) +#define pDMA2_X_MODIFY ((volatile signed short *)DMA2_X_MODIFY) +#define pDMA2_Y_MODIFY ((volatile signed short *)DMA2_Y_MODIFY) +#define pDMA2_CURR_DESC_PTR ((void * volatile *)DMA2_CURR_DESC_PTR) +#define pDMA2_CURR_ADDR ((void * volatile *)DMA2_CURR_ADDR) +#define pDMA2_CURR_X_COUNT ((volatile unsigned short *)DMA2_CURR_X_COUNT) +#define pDMA2_CURR_Y_COUNT ((volatile unsigned short *)DMA2_CURR_Y_COUNT) +#define pDMA2_IRQ_STATUS ((volatile unsigned short *)DMA2_IRQ_STATUS) +#define pDMA2_PERIPHERAL_MAP ((volatile unsigned short *)DMA2_PERIPHERAL_MAP) + +#define pDMA3_CONFIG ((volatile unsigned short *)DMA3_CONFIG) +#define pDMA3_NEXT_DESC_PTR ((void * volatile *)DMA3_NEXT_DESC_PTR) +#define pDMA3_START_ADDR ((void * volatile *)DMA3_START_ADDR) +#define pDMA3_X_COUNT ((volatile unsigned short *)DMA3_X_COUNT) +#define pDMA3_Y_COUNT ((volatile unsigned short *)DMA3_Y_COUNT) +#define pDMA3_X_MODIFY ((volatile signed short *)DMA3_X_MODIFY) +#define pDMA3_Y_MODIFY ((volatile signed short *)DMA3_Y_MODIFY) +#define pDMA3_CURR_DESC_PTR ((void * volatile *)DMA3_CURR_DESC_PTR) +#define pDMA3_CURR_ADDR ((void * volatile *)DMA3_CURR_ADDR) +#define pDMA3_CURR_X_COUNT ((volatile unsigned short *)DMA3_CURR_X_COUNT) +#define pDMA3_CURR_Y_COUNT ((volatile unsigned short *)DMA3_CURR_Y_COUNT) +#define pDMA3_IRQ_STATUS ((volatile unsigned short *)DMA3_IRQ_STATUS) +#define pDMA3_PERIPHERAL_MAP ((volatile unsigned short *)DMA3_PERIPHERAL_MAP) + +#define pDMA4_CONFIG ((volatile unsigned short *)DMA4_CONFIG) +#define pDMA4_NEXT_DESC_PTR ((void * volatile *)DMA4_NEXT_DESC_PTR) +#define pDMA4_START_ADDR ((void * volatile *)DMA4_START_ADDR) +#define pDMA4_X_COUNT ((volatile unsigned short *)DMA4_X_COUNT) +#define pDMA4_Y_COUNT ((volatile unsigned short *)DMA4_Y_COUNT) +#define pDMA4_X_MODIFY ((volatile signed short *)DMA4_X_MODIFY) +#define pDMA4_Y_MODIFY ((volatile signed short *)DMA4_Y_MODIFY) +#define pDMA4_CURR_DESC_PTR ((void * volatile *)DMA4_CURR_DESC_PTR) +#define pDMA4_CURR_ADDR ((void * volatile *)DMA4_CURR_ADDR) +#define pDMA4_CURR_X_COUNT ((volatile unsigned short *)DMA4_CURR_X_COUNT) +#define pDMA4_CURR_Y_COUNT ((volatile unsigned short *)DMA4_CURR_Y_COUNT) +#define pDMA4_IRQ_STATUS ((volatile unsigned short *)DMA4_IRQ_STATUS) +#define pDMA4_PERIPHERAL_MAP ((volatile unsigned short *)DMA4_PERIPHERAL_MAP) + +#define pDMA5_CONFIG ((volatile unsigned short *)DMA5_CONFIG) +#define pDMA5_NEXT_DESC_PTR ((void * volatile *)DMA5_NEXT_DESC_PTR) +#define pDMA5_START_ADDR ((void * volatile *)DMA5_START_ADDR) +#define pDMA5_X_COUNT ((volatile unsigned short *)DMA5_X_COUNT) +#define pDMA5_Y_COUNT ((volatile unsigned short *)DMA5_Y_COUNT) +#define pDMA5_X_MODIFY ((volatile signed short *)DMA5_X_MODIFY) +#define pDMA5_Y_MODIFY ((volatile signed short *)DMA5_Y_MODIFY) +#define pDMA5_CURR_DESC_PTR ((void * volatile *)DMA5_CURR_DESC_PTR) +#define pDMA5_CURR_ADDR ((void * volatile *)DMA5_CURR_ADDR) +#define pDMA5_CURR_X_COUNT ((volatile unsigned short *)DMA5_CURR_X_COUNT) +#define pDMA5_CURR_Y_COUNT ((volatile unsigned short *)DMA5_CURR_Y_COUNT) +#define pDMA5_IRQ_STATUS ((volatile unsigned short *)DMA5_IRQ_STATUS) +#define pDMA5_PERIPHERAL_MAP ((volatile unsigned short *)DMA5_PERIPHERAL_MAP) + +#define pDMA6_CONFIG ((volatile unsigned short *)DMA6_CONFIG) +#define pDMA6_NEXT_DESC_PTR ((void * volatile *)DMA6_NEXT_DESC_PTR) +#define pDMA6_START_ADDR ((void * volatile *)DMA6_START_ADDR) +#define pDMA6_X_COUNT ((volatile unsigned short *)DMA6_X_COUNT) +#define pDMA6_Y_COUNT ((volatile unsigned short *)DMA6_Y_COUNT) +#define pDMA6_X_MODIFY ((volatile signed short *)DMA6_X_MODIFY) +#define pDMA6_Y_MODIFY ((volatile signed short *)DMA6_Y_MODIFY) +#define pDMA6_CURR_DESC_PTR ((void * volatile *)DMA6_CURR_DESC_PTR) +#define pDMA6_CURR_ADDR ((void * volatile *)DMA6_CURR_ADDR) +#define pDMA6_CURR_X_COUNT ((volatile unsigned short *)DMA6_CURR_X_COUNT) +#define pDMA6_CURR_Y_COUNT ((volatile unsigned short *)DMA6_CURR_Y_COUNT) +#define pDMA6_IRQ_STATUS ((volatile unsigned short *)DMA6_IRQ_STATUS) +#define pDMA6_PERIPHERAL_MAP ((volatile unsigned short *)DMA6_PERIPHERAL_MAP) + +#define pDMA7_CONFIG ((volatile unsigned short *)DMA7_CONFIG) +#define pDMA7_NEXT_DESC_PTR ((void * volatile *)DMA7_NEXT_DESC_PTR) +#define pDMA7_START_ADDR ((void * volatile *)DMA7_START_ADDR) +#define pDMA7_X_COUNT ((volatile unsigned short *)DMA7_X_COUNT) +#define pDMA7_Y_COUNT ((volatile unsigned short *)DMA7_Y_COUNT) +#define pDMA7_X_MODIFY ((volatile signed short *)DMA7_X_MODIFY) +#define pDMA7_Y_MODIFY ((volatile signed short *)DMA7_Y_MODIFY) +#define pDMA7_CURR_DESC_PTR ((void * volatile *)DMA7_CURR_DESC_PTR) +#define pDMA7_CURR_ADDR ((void * volatile *)DMA7_CURR_ADDR) +#define pDMA7_CURR_X_COUNT ((volatile unsigned short *)DMA7_CURR_X_COUNT) +#define pDMA7_CURR_Y_COUNT ((volatile unsigned short *)DMA7_CURR_Y_COUNT) +#define pDMA7_IRQ_STATUS ((volatile unsigned short *)DMA7_IRQ_STATUS) +#define pDMA7_PERIPHERAL_MAP ((volatile unsigned short *)DMA7_PERIPHERAL_MAP) + +#define pDMA8_CONFIG ((volatile unsigned short *)DMA8_CONFIG) +#define pDMA8_NEXT_DESC_PTR ((void * volatile *)DMA8_NEXT_DESC_PTR) +#define pDMA8_START_ADDR ((void * volatile *)DMA8_START_ADDR) +#define pDMA8_X_COUNT ((volatile unsigned short *)DMA8_X_COUNT) +#define pDMA8_Y_COUNT ((volatile unsigned short *)DMA8_Y_COUNT) +#define pDMA8_X_MODIFY ((volatile signed short *)DMA8_X_MODIFY) +#define pDMA8_Y_MODIFY ((volatile signed short *)DMA8_Y_MODIFY) +#define pDMA8_CURR_DESC_PTR ((void * volatile *)DMA8_CURR_DESC_PTR) +#define pDMA8_CURR_ADDR ((void * volatile *)DMA8_CURR_ADDR) +#define pDMA8_CURR_X_COUNT ((volatile unsigned short *)DMA8_CURR_X_COUNT) +#define pDMA8_CURR_Y_COUNT ((volatile unsigned short *)DMA8_CURR_Y_COUNT) +#define pDMA8_IRQ_STATUS ((volatile unsigned short *)DMA8_IRQ_STATUS) +#define pDMA8_PERIPHERAL_MAP ((volatile unsigned short *)DMA8_PERIPHERAL_MAP) + +#define pDMA9_CONFIG ((volatile unsigned short *)DMA9_CONFIG) +#define pDMA9_NEXT_DESC_PTR ((void * volatile *)DMA9_NEXT_DESC_PTR) +#define pDMA9_START_ADDR ((void * volatile *)DMA9_START_ADDR) +#define pDMA9_X_COUNT ((volatile unsigned short *)DMA9_X_COUNT) +#define pDMA9_Y_COUNT ((volatile unsigned short *)DMA9_Y_COUNT) +#define pDMA9_X_MODIFY ((volatile signed short *)DMA9_X_MODIFY) +#define pDMA9_Y_MODIFY ((volatile signed short *)DMA9_Y_MODIFY) +#define pDMA9_CURR_DESC_PTR ((void * volatile *)DMA9_CURR_DESC_PTR) +#define pDMA9_CURR_ADDR ((void * volatile *)DMA9_CURR_ADDR) +#define pDMA9_CURR_X_COUNT ((volatile unsigned short *)DMA9_CURR_X_COUNT) +#define pDMA9_CURR_Y_COUNT ((volatile unsigned short *)DMA9_CURR_Y_COUNT) +#define pDMA9_IRQ_STATUS ((volatile unsigned short *)DMA9_IRQ_STATUS) +#define pDMA9_PERIPHERAL_MAP ((volatile unsigned short *)DMA9_PERIPHERAL_MAP) + +#define pDMA10_CONFIG ((volatile unsigned short *)DMA10_CONFIG) +#define pDMA10_NEXT_DESC_PTR ((void * volatile *)DMA10_NEXT_DESC_PTR) +#define pDMA10_START_ADDR ((void * volatile *)DMA10_START_ADDR) +#define pDMA10_X_COUNT ((volatile unsigned short *)DMA10_X_COUNT) +#define pDMA10_Y_COUNT ((volatile unsigned short *)DMA10_Y_COUNT) +#define pDMA10_X_MODIFY ((volatile signed short *)DMA10_X_MODIFY) +#define pDMA10_Y_MODIFY ((volatile signed short *)DMA10_Y_MODIFY) +#define pDMA10_CURR_DESC_PTR ((void * volatile *)DMA10_CURR_DESC_PTR) +#define pDMA10_CURR_ADDR ((void * volatile *)DMA10_CURR_ADDR) +#define pDMA10_CURR_X_COUNT ((volatile unsigned short *)DMA10_CURR_X_COUNT) +#define pDMA10_CURR_Y_COUNT ((volatile unsigned short *)DMA10_CURR_Y_COUNT) +#define pDMA10_IRQ_STATUS ((volatile unsigned short *)DMA10_IRQ_STATUS) +#define pDMA10_PERIPHERAL_MAP ((volatile unsigned short *)DMA10_PERIPHERAL_MAP) + +#define pDMA11_CONFIG ((volatile unsigned short *)DMA11_CONFIG) +#define pDMA11_NEXT_DESC_PTR ((void * volatile *)DMA11_NEXT_DESC_PTR) +#define pDMA11_START_ADDR ((void * volatile *)DMA11_START_ADDR) +#define pDMA11_X_COUNT ((volatile unsigned short *)DMA11_X_COUNT) +#define pDMA11_Y_COUNT ((volatile unsigned short *)DMA11_Y_COUNT) +#define pDMA11_X_MODIFY ((volatile signed short *)DMA11_X_MODIFY) +#define pDMA11_Y_MODIFY ((volatile signed short *)DMA11_Y_MODIFY) +#define pDMA11_CURR_DESC_PTR ((void * volatile *)DMA11_CURR_DESC_PTR) +#define pDMA11_CURR_ADDR ((void * volatile *)DMA11_CURR_ADDR) +#define pDMA11_CURR_X_COUNT ((volatile unsigned short *)DMA11_CURR_X_COUNT) +#define pDMA11_CURR_Y_COUNT ((volatile unsigned short *)DMA11_CURR_Y_COUNT) +#define pDMA11_IRQ_STATUS ((volatile unsigned short *)DMA11_IRQ_STATUS) +#define pDMA11_PERIPHERAL_MAP ((volatile unsigned short *)DMA11_PERIPHERAL_MAP) + +#define pMDMA_D0_CONFIG ((volatile unsigned short *)MDMA_D0_CONFIG) +#define pMDMA_D0_NEXT_DESC_PTR ((void * volatile *)MDMA_D0_NEXT_DESC_PTR) +#define pMDMA_D0_START_ADDR ((void * volatile *)MDMA_D0_START_ADDR) +#define pMDMA_D0_X_COUNT ((volatile unsigned short *)MDMA_D0_X_COUNT) +#define pMDMA_D0_Y_COUNT ((volatile unsigned short *)MDMA_D0_Y_COUNT) +#define pMDMA_D0_X_MODIFY ((volatile signed short *)MDMA_D0_X_MODIFY) +#define pMDMA_D0_Y_MODIFY ((volatile signed short *)MDMA_D0_Y_MODIFY) +#define pMDMA_D0_CURR_DESC_PTR ((void * volatile *)MDMA_D0_CURR_DESC_PTR) +#define pMDMA_D0_CURR_ADDR ((void * volatile *)MDMA_D0_CURR_ADDR) +#define pMDMA_D0_CURR_X_COUNT ((volatile unsigned short *)MDMA_D0_CURR_X_COUNT) +#define pMDMA_D0_CURR_Y_COUNT ((volatile unsigned short *)MDMA_D0_CURR_Y_COUNT) +#define pMDMA_D0_IRQ_STATUS ((volatile unsigned short *)MDMA_D0_IRQ_STATUS) +#define pMDMA_D0_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_D0_PERIPHERAL_MAP) + +#define pMDMA_S0_CONFIG ((volatile unsigned short *)MDMA_S0_CONFIG) +#define pMDMA_S0_NEXT_DESC_PTR ((void * volatile *)MDMA_S0_NEXT_DESC_PTR) +#define pMDMA_S0_START_ADDR ((void * volatile *)MDMA_S0_START_ADDR) +#define pMDMA_S0_X_COUNT ((volatile unsigned short *)MDMA_S0_X_COUNT) +#define pMDMA_S0_Y_COUNT ((volatile unsigned short *)MDMA_S0_Y_COUNT) +#define pMDMA_S0_X_MODIFY ((volatile signed short *)MDMA_S0_X_MODIFY) +#define pMDMA_S0_Y_MODIFY ((volatile signed short *)MDMA_S0_Y_MODIFY) +#define pMDMA_S0_CURR_DESC_PTR ((void * volatile *)MDMA_S0_CURR_DESC_PTR) +#define pMDMA_S0_CURR_ADDR ((void * volatile *)MDMA_S0_CURR_ADDR) +#define pMDMA_S0_CURR_X_COUNT ((volatile unsigned short *)MDMA_S0_CURR_X_COUNT) +#define pMDMA_S0_CURR_Y_COUNT ((volatile unsigned short *)MDMA_S0_CURR_Y_COUNT) +#define pMDMA_S0_IRQ_STATUS ((volatile unsigned short *)MDMA_S0_IRQ_STATUS) +#define pMDMA_S0_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_S0_PERIPHERAL_MAP) + +#define pMDMA_D1_CONFIG ((volatile unsigned short *)MDMA_D1_CONFIG) +#define pMDMA_D1_NEXT_DESC_PTR ((void * volatile *)MDMA_D1_NEXT_DESC_PTR) +#define pMDMA_D1_START_ADDR ((void * volatile *)MDMA_D1_START_ADDR) +#define pMDMA_D1_X_COUNT ((volatile unsigned short *)MDMA_D1_X_COUNT) +#define pMDMA_D1_Y_COUNT ((volatile unsigned short *)MDMA_D1_Y_COUNT) +#define pMDMA_D1_X_MODIFY ((volatile signed short *)MDMA_D1_X_MODIFY) +#define pMDMA_D1_Y_MODIFY ((volatile signed short *)MDMA_D1_Y_MODIFY) +#define pMDMA_D1_CURR_DESC_PTR ((void * volatile *)MDMA_D1_CURR_DESC_PTR) +#define pMDMA_D1_CURR_ADDR ((void * volatile *)MDMA_D1_CURR_ADDR) +#define pMDMA_D1_CURR_X_COUNT ((volatile unsigned short *)MDMA_D1_CURR_X_COUNT) +#define pMDMA_D1_CURR_Y_COUNT ((volatile unsigned short *)MDMA_D1_CURR_Y_COUNT) +#define pMDMA_D1_IRQ_STATUS ((volatile unsigned short *)MDMA_D1_IRQ_STATUS) +#define pMDMA_D1_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_D1_PERIPHERAL_MAP) + +#define pMDMA_S1_CONFIG ((volatile unsigned short *)MDMA_S1_CONFIG) +#define pMDMA_S1_NEXT_DESC_PTR ((void * volatile *)MDMA_S1_NEXT_DESC_PTR) +#define pMDMA_S1_START_ADDR ((void * volatile *)MDMA_S1_START_ADDR) +#define pMDMA_S1_X_COUNT ((volatile unsigned short *)MDMA_S1_X_COUNT) +#define pMDMA_S1_Y_COUNT ((volatile unsigned short *)MDMA_S1_Y_COUNT) +#define pMDMA_S1_X_MODIFY ((volatile signed short *)MDMA_S1_X_MODIFY) +#define pMDMA_S1_Y_MODIFY ((volatile signed short *)MDMA_S1_Y_MODIFY) +#define pMDMA_S1_CURR_DESC_PTR ((void * volatile *)MDMA_S1_CURR_DESC_PTR) +#define pMDMA_S1_CURR_ADDR ((void * volatile *)MDMA_S1_CURR_ADDR) +#define pMDMA_S1_CURR_X_COUNT ((volatile unsigned short *)MDMA_S1_CURR_X_COUNT) +#define pMDMA_S1_CURR_Y_COUNT ((volatile unsigned short *)MDMA_S1_CURR_Y_COUNT) +#define pMDMA_S1_IRQ_STATUS ((volatile unsigned short *)MDMA_S1_IRQ_STATUS) +#define pMDMA_S1_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_S1_PERIPHERAL_MAP) + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define pPPI_CONTROL ((volatile unsigned short *)PPI_CONTROL) +#define pPPI_STATUS ((volatile unsigned short *)PPI_STATUS) +#define pPPI_DELAY ((volatile unsigned short *)PPI_DELAY) +#define pPPI_COUNT ((volatile unsigned short *)PPI_COUNT) +#define pPPI_FRAME ((volatile unsigned short *)PPI_FRAME) + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define pTWI_CLKDIV ((volatile unsigned short *)TWI_CLKDIV) +#define pTWI_CONTROL ((volatile unsigned short *)TWI_CONTROL) +#define pTWI_SLAVE_CTL ((volatile unsigned short *)TWI_SLAVE_CTL) +#define pTWI_SLAVE_STAT ((volatile unsigned short *)TWI_SLAVE_STAT) +#define pTWI_SLAVE_ADDR ((volatile unsigned short *)TWI_SLAVE_ADDR) +#define pTWI_MASTER_CTL ((volatile unsigned short *)TWI_MASTER_CTL) +#define pTWI_MASTER_STAT ((volatile unsigned short *)TWI_MASTER_STAT) +#define pTWI_MASTER_ADDR ((volatile unsigned short *)TWI_MASTER_ADDR) +#define pTWI_INT_STAT ((volatile unsigned short *)TWI_INT_STAT) +#define pTWI_INT_MASK ((volatile unsigned short *)TWI_INT_MASK) +#define pTWI_FIFO_CTL ((volatile unsigned short *)TWI_FIFO_CTL) +#define pTWI_FIFO_STAT ((volatile unsigned short *)TWI_FIFO_STAT) +#define pTWI_XMT_DATA8 ((volatile unsigned short *)TWI_XMT_DATA8) +#define pTWI_XMT_DATA16 ((volatile unsigned short *)TWI_XMT_DATA16) +#define pTWI_RCV_DATA8 ((volatile unsigned short *)TWI_RCV_DATA8) +#define pTWI_RCV_DATA16 ((volatile unsigned short *)TWI_RCV_DATA16) + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define pPORTGIO ((volatile unsigned short *)PORTGIO) +#define pPORTGIO_CLEAR ((volatile unsigned short *)PORTGIO_CLEAR) +#define pPORTGIO_SET ((volatile unsigned short *)PORTGIO_SET) +#define pPORTGIO_TOGGLE ((volatile unsigned short *)PORTGIO_TOGGLE) +#define pPORTGIO_MASKA ((volatile unsigned short *)PORTGIO_MASKA) +#define pPORTGIO_MASKA_CLEAR ((volatile unsigned short *)PORTGIO_MASKA_CLEAR) +#define pPORTGIO_MASKA_SET ((volatile unsigned short *)PORTGIO_MASKA_SET) +#define pPORTGIO_MASKA_TOGGLE ((volatile unsigned short *)PORTGIO_MASKA_TOGGLE) +#define pPORTGIO_MASKB ((volatile unsigned short *)PORTGIO_MASKB) +#define pPORTGIO_MASKB_CLEAR ((volatile unsigned short *)PORTGIO_MASKB_CLEAR) +#define pPORTGIO_MASKB_SET ((volatile unsigned short *)PORTGIO_MASKB_SET) +#define pPORTGIO_MASKB_TOGGLE ((volatile unsigned short *)PORTGIO_MASKB_TOGGLE) +#define pPORTGIO_DIR ((volatile unsigned short *)PORTGIO_DIR) +#define pPORTGIO_POLAR ((volatile unsigned short *)PORTGIO_POLAR) +#define pPORTGIO_EDGE ((volatile unsigned short *)PORTGIO_EDGE) +#define pPORTGIO_BOTH ((volatile unsigned short *)PORTGIO_BOTH) +#define pPORTGIO_INEN ((volatile unsigned short *)PORTGIO_INEN) + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define pPORTHIO ((volatile unsigned short *)PORTHIO) +#define pPORTHIO_CLEAR ((volatile unsigned short *)PORTHIO_CLEAR) +#define pPORTHIO_SET ((volatile unsigned short *)PORTHIO_SET) +#define pPORTHIO_TOGGLE ((volatile unsigned short *)PORTHIO_TOGGLE) +#define pPORTHIO_MASKA ((volatile unsigned short *)PORTHIO_MASKA) +#define pPORTHIO_MASKA_CLEAR ((volatile unsigned short *)PORTHIO_MASKA_CLEAR) +#define pPORTHIO_MASKA_SET ((volatile unsigned short *)PORTHIO_MASKA_SET) +#define pPORTHIO_MASKA_TOGGLE ((volatile unsigned short *)PORTHIO_MASKA_TOGGLE) +#define pPORTHIO_MASKB ((volatile unsigned short *)PORTHIO_MASKB) +#define pPORTHIO_MASKB_CLEAR ((volatile unsigned short *)PORTHIO_MASKB_CLEAR) +#define pPORTHIO_MASKB_SET ((volatile unsigned short *)PORTHIO_MASKB_SET) +#define pPORTHIO_MASKB_TOGGLE ((volatile unsigned short *)PORTHIO_MASKB_TOGGLE) +#define pPORTHIO_DIR ((volatile unsigned short *)PORTHIO_DIR) +#define pPORTHIO_POLAR ((volatile unsigned short *)PORTHIO_POLAR) +#define pPORTHIO_EDGE ((volatile unsigned short *)PORTHIO_EDGE) +#define pPORTHIO_BOTH ((volatile unsigned short *)PORTHIO_BOTH) +#define pPORTHIO_INEN ((volatile unsigned short *)PORTHIO_INEN) + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define pUART1_THR ((volatile unsigned short *)UART1_THR) +#define pUART1_RBR ((volatile unsigned short *)UART1_RBR) +#define pUART1_DLL ((volatile unsigned short *)UART1_DLL) +#define pUART1_IER ((volatile unsigned short *)UART1_IER) +#define pUART1_DLH ((volatile unsigned short *)UART1_DLH) +#define pUART1_IIR ((volatile unsigned short *)UART1_IIR) +#define pUART1_LCR ((volatile unsigned short *)UART1_LCR) +#define pUART1_MCR ((volatile unsigned short *)UART1_MCR) +#define pUART1_LSR ((volatile unsigned short *)UART1_LSR) +#define pUART1_MSR ((volatile unsigned short *)UART1_LSR) +#define pUART1_SCR ((volatile unsigned short *)UART1_SCR) +#define pUART1_GCTL ((volatile unsigned short *)UART1_GCTL) + +/* default UART controller */ +#if (CONFIG_UART_CONSOLE==1) + +#define pUART_THR pUART1_THR +#define pUART_RBR pUART1_RBR +#define pUART_DLL pUART1_DLL +#define pUART_IER pUART1_IER +#define pUART_DLH pUART1_DLH +#define pUART_IIR pUART1_IIR +#define pUART_LCR pUART1_LCR +#define pUART_MCR pUART1_MCR +#define pUART_LSR pUART1_LSR +#define pUART_MSR pUART1_MSR +#define pUART_SCR pUART1_SCR +#define pUART_GCTL pUART1_GCTL + +#else + +#define pUART_THR pUART0_THR +#define pUART_RBR pUART0_RBR +#define pUART_DLL pUART0_DLL +#define pUART_IER pUART0_IER +#define pUART_DLH pUART0_DLH +#define pUART_IIR pUART0_IIR +#define pUART_LCR pUART0_LCR +#define pUART_MCR pUART0_MCR +#define pUART_LSR pUART0_LSR +#define pUART_MSR pUART0_MSR +#define pUART_SCR pUART0_SCR +#define pUART_GCTL pUART0_GCTL + +#endif + +/* CAN Controller (0xFFC02A00 - 0xFFC02FFF) */ +/* For Mailboxes 0-15 */ +#define pCAN_MC1 ((volatile unsigned short *)CAN_MC1) +#define pCAN_MD1 ((volatile unsigned short *)CAN_MD1) +#define pCAN_TRS1 ((volatile unsigned short *)CAN_TRS1) +#define pCAN_TRR1 ((volatile unsigned short *)CAN_TRR1) +#define pCAN_TA1 ((volatile unsigned short *)CAN_TA1) +#define pCAN_AA1 ((volatile unsigned short *)CAN_AA1) +#define pCAN_RMP1 ((volatile unsigned short *)CAN_RMP1) +#define pCAN_RML1 ((volatile unsigned short *)CAN_RML1) +#define pCAN_MBTIF1 ((volatile unsigned short *)CAN_MBTIF1) +#define pCAN_MBRIF1 ((volatile unsigned short *)CAN_MBRIF1) +#define pCAN_MBIM1 ((volatile unsigned short *)CAN_MBIM1) +#define pCAN_RFH1 ((volatile unsigned short *)CAN_RFH1) +#define pCAN_OPSS1 ((volatile unsigned short *)CAN_OPSS1) + +/* For Mailboxes 16-31 */ +#define pCAN_MC2 ((volatile unsigned short *)CAN_MC2) +#define pCAN_MD2 ((volatile unsigned short *)CAN_MD2) +#define pCAN_TRS2 ((volatile unsigned short *)CAN_TRS2) +#define pCAN_TRR2 ((volatile unsigned short *)CAN_TRR2) +#define pCAN_TA2 ((volatile unsigned short *)CAN_TA2) +#define pCAN_AA2 ((volatile unsigned short *)CAN_AA2) +#define pCAN_RMP2 ((volatile unsigned short *)CAN_RMP2) +#define pCAN_RML2 ((volatile unsigned short *)CAN_RML2) +#define pCAN_MBTIF2 ((volatile unsigned short *)CAN_MBTIF2) +#define pCAN_MBRIF2 ((volatile unsigned short *)CAN_MBRIF2) +#define pCAN_MBIM2 ((volatile unsigned short *)CAN_MBIM2) +#define pCAN_RFH2 ((volatile unsigned short *)CAN_RFH2) +#define pCAN_OPSS2 ((volatile unsigned short *)CAN_OPSS2) + +#define pCAN_CLOCK ((volatile unsigned short *)CAN_CLOCK) +#define pCAN_TIMING ((volatile unsigned short *)CAN_TIMING) +#define pCAN_DEBUG ((volatile unsigned short *)CAN_DEBUG) +#define pCAN_STATUS ((volatile unsigned short *)CAN_STATUS) +#define pCAN_CEC ((volatile unsigned short *)CAN_CEC) +#define pCAN_GIS ((volatile unsigned short *)CAN_GIS) +#define pCAN_GIM ((volatile unsigned short *)CAN_GIM) +#define pCAN_GIF ((volatile unsigned short *)CAN_GIF) +#define pCAN_CONTROL ((volatile unsigned short *)CAN_CONTROL) +#define pCAN_INTR ((volatile unsigned short *)CAN_INTR) +#define pCAN_SFCMVER ((volatile unsigned short *)CAN_SFCMVER) +#define pCAN_MBTD ((volatile unsigned short *)CAN_MBTD) +#define pCAN_EWR ((volatile unsigned short *)CAN_EWR) +#define pCAN_ESR ((volatile unsigned short *)CAN_ESR) +#define pCAN_UCREG ((volatile unsigned short *)CAN_UCREG) +#define pCAN_UCCNT ((volatile unsigned short *)CAN_UCCNT) +#define pCAN_UCRC ((volatile unsigned short *)CAN_UCRC) +#define pCAN_UCCNF ((volatile unsigned short *)CAN_UCCNF) +#define pCAN_SFCMVER2 ((volatile unsigned short *)CAN_SFCMVER2) + +/* Mailbox Acceptance Masks */ +#define pCAN_AM00L ((volatile unsigned short *)CAN_AM00L) +#define pCAN_AM00H ((volatile unsigned short *)CAN_AM00H) +#define pCAN_AM01L ((volatile unsigned short *)CAN_AM01L) +#define pCAN_AM01H ((volatile unsigned short *)CAN_AM01H) +#define pCAN_AM02L ((volatile unsigned short *)CAN_AM02L) +#define pCAN_AM02H ((volatile unsigned short *)CAN_AM02H) +#define pCAN_AM03L ((volatile unsigned short *)CAN_AM03L) +#define pCAN_AM03H ((volatile unsigned short *)CAN_AM03H) +#define pCAN_AM04L ((volatile unsigned short *)CAN_AM04L) +#define pCAN_AM04H ((volatile unsigned short *)CAN_AM04H) +#define pCAN_AM05L ((volatile unsigned short *)CAN_AM05L) +#define pCAN_AM05H ((volatile unsigned short *)CAN_AM05H) +#define pCAN_AM06L ((volatile unsigned short *)CAN_AM06L) +#define pCAN_AM06H ((volatile unsigned short *)CAN_AM06H) +#define pCAN_AM07L ((volatile unsigned short *)CAN_AM07L) +#define pCAN_AM07H ((volatile unsigned short *)CAN_AM07H) +#define pCAN_AM08L ((volatile unsigned short *)CAN_AM08L) +#define pCAN_AM08H ((volatile unsigned short *)CAN_AM08H) +#define pCAN_AM09L ((volatile unsigned short *)CAN_AM09L) +#define pCAN_AM09H ((volatile unsigned short *)CAN_AM09H) +#define pCAN_AM10L ((volatile unsigned short *)CAN_AM10L) +#define pCAN_AM10H ((volatile unsigned short *)CAN_AM10H) +#define pCAN_AM11L ((volatile unsigned short *)CAN_AM11L) +#define pCAN_AM11H ((volatile unsigned short *)CAN_AM11H) +#define pCAN_AM12L ((volatile unsigned short *)CAN_AM12L) +#define pCAN_AM12H ((volatile unsigned short *)CAN_AM12H) +#define pCAN_AM13L ((volatile unsigned short *)CAN_AM13L) +#define pCAN_AM13H ((volatile unsigned short *)CAN_AM13H) +#define pCAN_AM14L ((volatile unsigned short *)CAN_AM14L) +#define pCAN_AM14H ((volatile unsigned short *)CAN_AM14H) +#define pCAN_AM15L ((volatile unsigned short *)CAN_AM15L) +#define pCAN_AM15H ((volatile unsigned short *)CAN_AM15H) + +#define pCAN_AM16L ((volatile unsigned short *)CAN_AM16L) +#define pCAN_AM16H ((volatile unsigned short *)CAN_AM16H) +#define pCAN_AM17L ((volatile unsigned short *)CAN_AM17L) +#define pCAN_AM17H ((volatile unsigned short *)CAN_AM17H) +#define pCAN_AM18L ((volatile unsigned short *)CAN_AM18L) +#define pCAN_AM18H ((volatile unsigned short *)CAN_AM18H) +#define pCAN_AM19L ((volatile unsigned short *)CAN_AM19L) +#define pCAN_AM19H ((volatile unsigned short *)CAN_AM19H) +#define pCAN_AM20L ((volatile unsigned short *)CAN_AM20L) +#define pCAN_AM20H ((volatile unsigned short *)CAN_AM20H) +#define pCAN_AM21L ((volatile unsigned short *)CAN_AM21L) +#define pCAN_AM21H ((volatile unsigned short *)CAN_AM21H) +#define pCAN_AM22L ((volatile unsigned short *)CAN_AM22L) +#define pCAN_AM22H ((volatile unsigned short *)CAN_AM22H) +#define pCAN_AM23L ((volatile unsigned short *)CAN_AM23L) +#define pCAN_AM23H ((volatile unsigned short *)CAN_AM23H) +#define pCAN_AM24L ((volatile unsigned short *)CAN_AM24L) +#define pCAN_AM24H ((volatile unsigned short *)CAN_AM24H) +#define pCAN_AM25L ((volatile unsigned short *)CAN_AM25L) +#define pCAN_AM25H ((volatile unsigned short *)CAN_AM25H) +#define pCAN_AM26L ((volatile unsigned short *)CAN_AM26L) +#define pCAN_AM26H ((volatile unsigned short *)CAN_AM26H) +#define pCAN_AM27L ((volatile unsigned short *)CAN_AM27L) +#define pCAN_AM27H ((volatile unsigned short *)CAN_AM27H) +#define pCAN_AM28L ((volatile unsigned short *)CAN_AM28L) +#define pCAN_AM28H ((volatile unsigned short *)CAN_AM28H) +#define pCAN_AM29L ((volatile unsigned short *)CAN_AM29L) +#define pCAN_AM29H ((volatile unsigned short *)CAN_AM29H) +#define pCAN_AM30L ((volatile unsigned short *)CAN_AM30L) +#define pCAN_AM30H ((volatile unsigned short *)CAN_AM30H) +#define pCAN_AM31L ((volatile unsigned short *)CAN_AM31L) +#define pCAN_AM31H ((volatile unsigned short *)CAN_AM31H) + +/* CAN Acceptance Mask Area Macros */ +#define pCAN_AM_L(x) ((volatile unsigned short *)CAN_AM_L(x)) +#define pCAN_AM_H(x) ((volatile unsigned short *)CAN_AM_H(x)) + +/* Mailbox Registers */ +#define pCAN_MB00_ID1 ((volatile unsigned short *)CAN_MB00_ID1) +#define pCAN_MB00_ID0 ((volatile unsigned short *)CAN_MB00_ID0) +#define pCAN_MB00_TIMESTAMP ((volatile unsigned short *)CAN_MB00_TIMESTAMP) +#define pCAN_MB00_LENGTH ((volatile unsigned short *)CAN_MB00_LENGTH) +#define pCAN_MB00_DATA3 ((volatile unsigned short *)CAN_MB00_DATA3) +#define pCAN_MB00_DATA2 ((volatile unsigned short *)CAN_MB00_DATA2) +#define pCAN_MB00_DATA1 ((volatile unsigned short *)CAN_MB00_DATA1) +#define pCAN_MB00_DATA0 ((volatile unsigned short *)CAN_MB00_DATA0) + +#define pCAN_MB01_ID1 ((volatile unsigned short *)CAN_MB01_ID1) +#define pCAN_MB01_ID0 ((volatile unsigned short *)CAN_MB01_ID0) +#define pCAN_MB01_TIMESTAMP ((volatile unsigned short *)CAN_MB01_TIMESTAMP) +#define pCAN_MB01_LENGTH ((volatile unsigned short *)CAN_MB01_LENGTH) +#define pCAN_MB01_DATA3 ((volatile unsigned short *)CAN_MB01_DATA3) +#define pCAN_MB01_DATA2 ((volatile unsigned short *)CAN_MB01_DATA2) +#define pCAN_MB01_DATA1 ((volatile unsigned short *)CAN_MB01_DATA1) +#define pCAN_MB01_DATA0 ((volatile unsigned short *)CAN_MB01_DATA0) + +#define pCAN_MB02_ID1 ((volatile unsigned short *)CAN_MB02_ID1) +#define pCAN_MB02_ID0 ((volatile unsigned short *)CAN_MB02_ID0) +#define pCAN_MB02_TIMESTAMP ((volatile unsigned short *)CAN_MB02_TIMESTAMP) +#define pCAN_MB02_LENGTH ((volatile unsigned short *)CAN_MB02_LENGTH) +#define pCAN_MB02_DATA3 ((volatile unsigned short *)CAN_MB02_DATA3) +#define pCAN_MB02_DATA2 ((volatile unsigned short *)CAN_MB02_DATA2) +#define pCAN_MB02_DATA1 ((volatile unsigned short *)CAN_MB02_DATA1) +#define pCAN_MB02_DATA0 ((volatile unsigned short *)CAN_MB02_DATA0) + +#define pCAN_MB03_ID1 ((volatile unsigned short *)CAN_MB03_ID1) +#define pCAN_MB03_ID0 ((volatile unsigned short *)CAN_MB03_ID0) +#define pCAN_MB03_TIMESTAMP ((volatile unsigned short *)CAN_MB03_TIMESTAMP) +#define pCAN_MB03_LENGTH ((volatile unsigned short *)CAN_MB03_LENGTH) +#define pCAN_MB03_DATA3 ((volatile unsigned short *)CAN_MB03_DATA3) +#define pCAN_MB03_DATA2 ((volatile unsigned short *)CAN_MB03_DATA2) +#define pCAN_MB03_DATA1 ((volatile unsigned short *)CAN_MB03_DATA1) +#define pCAN_MB03_DATA0 ((volatile unsigned short *)CAN_MB03_DATA0) + +#define pCAN_MB04_ID1 ((volatile unsigned short *)CAN_MB04_ID1) +#define pCAN_MB04_ID0 ((volatile unsigned short *)CAN_MB04_ID0) +#define pCAN_MB04_TIMESTAMP ((volatile unsigned short *)CAN_MB04_TIMESTAMP) +#define pCAN_MB04_LENGTH ((volatile unsigned short *)CAN_MB04_LENGTH) +#define pCAN_MB04_DATA3 ((volatile unsigned short *)CAN_MB04_DATA3) +#define pCAN_MB04_DATA2 ((volatile unsigned short *)CAN_MB04_DATA2) +#define pCAN_MB04_DATA1 ((volatile unsigned short *)CAN_MB04_DATA1) +#define pCAN_MB04_DATA0 ((volatile unsigned short *)CAN_MB04_DATA0) + +#define pCAN_MB05_ID1 ((volatile unsigned short *)CAN_MB05_ID1) +#define pCAN_MB05_ID0 ((volatile unsigned short *)CAN_MB05_ID0) +#define pCAN_MB05_TIMESTAMP ((volatile unsigned short *)CAN_MB05_TIMESTAMP) +#define pCAN_MB05_LENGTH ((volatile unsigned short *)CAN_MB05_LENGTH) +#define pCAN_MB05_DATA3 ((volatile unsigned short *)CAN_MB05_DATA3) +#define pCAN_MB05_DATA2 ((volatile unsigned short *)CAN_MB05_DATA2) +#define pCAN_MB05_DATA1 ((volatile unsigned short *)CAN_MB05_DATA1) +#define pCAN_MB05_DATA0 ((volatile unsigned short *)CAN_MB05_DATA0) + +#define pCAN_MB06_ID1 ((volatile unsigned short *)CAN_MB06_ID1) +#define pCAN_MB06_ID0 ((volatile unsigned short *)CAN_MB06_ID0) +#define pCAN_MB06_TIMESTAMP ((volatile unsigned short *)CAN_MB06_TIMESTAMP) +#define pCAN_MB06_LENGTH ((volatile unsigned short *)CAN_MB06_LENGTH) +#define pCAN_MB06_DATA3 ((volatile unsigned short *)CAN_MB06_DATA3) +#define pCAN_MB06_DATA2 ((volatile unsigned short *)CAN_MB06_DATA2) +#define pCAN_MB06_DATA1 ((volatile unsigned short *)CAN_MB06_DATA1) +#define pCAN_MB06_DATA0 ((volatile unsigned short *)CAN_MB06_DATA0) + +#define pCAN_MB07_ID1 ((volatile unsigned short *)CAN_MB07_ID1) +#define pCAN_MB07_ID0 ((volatile unsigned short *)CAN_MB07_ID0) +#define pCAN_MB07_TIMESTAMP ((volatile unsigned short *)CAN_MB07_TIMESTAMP) +#define pCAN_MB07_LENGTH ((volatile unsigned short *)CAN_MB07_LENGTH) +#define pCAN_MB07_DATA3 ((volatile unsigned short *)CAN_MB07_DATA3) +#define pCAN_MB07_DATA2 ((volatile unsigned short *)CAN_MB07_DATA2) +#define pCAN_MB07_DATA1 ((volatile unsigned short *)CAN_MB07_DATA1) +#define pCAN_MB07_DATA0 ((volatile unsigned short *)CAN_MB07_DATA0) + +#define pCAN_MB08_ID1 ((volatile unsigned short *)CAN_MB08_ID1) +#define pCAN_MB08_ID0 ((volatile unsigned short *)CAN_MB08_ID0) +#define pCAN_MB08_TIMESTAMP ((volatile unsigned short *)CAN_MB08_TIMESTAMP) +#define pCAN_MB08_LENGTH ((volatile unsigned short *)CAN_MB08_LENGTH) +#define pCAN_MB08_DATA3 ((volatile unsigned short *)CAN_MB08_DATA3) +#define pCAN_MB08_DATA2 ((volatile unsigned short *)CAN_MB08_DATA2) +#define pCAN_MB08_DATA1 ((volatile unsigned short *)CAN_MB08_DATA1) +#define pCAN_MB08_DATA0 ((volatile unsigned short *)CAN_MB08_DATA0) + +#define pCAN_MB09_ID1 ((volatile unsigned short *)CAN_MB09_ID1) +#define pCAN_MB09_ID0 ((volatile unsigned short *)CAN_MB09_ID0) +#define pCAN_MB09_TIMESTAMP ((volatile unsigned short *)CAN_MB09_TIMESTAMP) +#define pCAN_MB09_LENGTH ((volatile unsigned short *)CAN_MB09_LENGTH) +#define pCAN_MB09_DATA3 ((volatile unsigned short *)CAN_MB09_DATA3) +#define pCAN_MB09_DATA2 ((volatile unsigned short *)CAN_MB09_DATA2) +#define pCAN_MB09_DATA1 ((volatile unsigned short *)CAN_MB09_DATA1) +#define pCAN_MB09_DATA0 ((volatile unsigned short *)CAN_MB09_DATA0) + +#define pCAN_MB10_ID1 ((volatile unsigned short *)CAN_MB10_ID1) +#define pCAN_MB10_ID0 ((volatile unsigned short *)CAN_MB10_ID0) +#define pCAN_MB10_TIMESTAMP ((volatile unsigned short *)CAN_MB10_TIMESTAMP) +#define pCAN_MB10_LENGTH ((volatile unsigned short *)CAN_MB10_LENGTH) +#define pCAN_MB10_DATA3 ((volatile unsigned short *)CAN_MB10_DATA3) +#define pCAN_MB10_DATA2 ((volatile unsigned short *)CAN_MB10_DATA2) +#define pCAN_MB10_DATA1 ((volatile unsigned short *)CAN_MB10_DATA1) +#define pCAN_MB10_DATA0 ((volatile unsigned short *)CAN_MB10_DATA0) + +#define pCAN_MB11_ID1 ((volatile unsigned short *)CAN_MB11_ID1) +#define pCAN_MB11_ID0 ((volatile unsigned short *)CAN_MB11_ID0) +#define pCAN_MB11_TIMESTAMP ((volatile unsigned short *)CAN_MB11_TIMESTAMP) +#define pCAN_MB11_LENGTH ((volatile unsigned short *)CAN_MB11_LENGTH) +#define pCAN_MB11_DATA3 ((volatile unsigned short *)CAN_MB11_DATA3) +#define pCAN_MB11_DATA2 ((volatile unsigned short *)CAN_MB11_DATA2) +#define pCAN_MB11_DATA1 ((volatile unsigned short *)CAN_MB11_DATA1) +#define pCAN_MB11_DATA0 ((volatile unsigned short *)CAN_MB11_DATA0) + +#define pCAN_MB12_ID1 ((volatile unsigned short *)CAN_MB12_ID1) +#define pCAN_MB12_ID0 ((volatile unsigned short *)CAN_MB12_ID0) +#define pCAN_MB12_TIMESTAMP ((volatile unsigned short *)CAN_MB12_TIMESTAMP) +#define pCAN_MB12_LENGTH ((volatile unsigned short *)CAN_MB12_LENGTH) +#define pCAN_MB12_DATA3 ((volatile unsigned short *)CAN_MB12_DATA3) +#define pCAN_MB12_DATA2 ((volatile unsigned short *)CAN_MB12_DATA2) +#define pCAN_MB12_DATA1 ((volatile unsigned short *)CAN_MB12_DATA1) +#define pCAN_MB12_DATA0 ((volatile unsigned short *)CAN_MB12_DATA0) + +#define pCAN_MB13_ID1 ((volatile unsigned short *)CAN_MB13_ID1) +#define pCAN_MB13_ID0 ((volatile unsigned short *)CAN_MB13_ID0) +#define pCAN_MB13_TIMESTAMP ((volatile unsigned short *)CAN_MB13_TIMESTAMP) +#define pCAN_MB13_LENGTH ((volatile unsigned short *)CAN_MB13_LENGTH) +#define pCAN_MB13_DATA3 ((volatile unsigned short *)CAN_MB13_DATA3) +#define pCAN_MB13_DATA2 ((volatile unsigned short *)CAN_MB13_DATA2) +#define pCAN_MB13_DATA1 ((volatile unsigned short *)CAN_MB13_DATA1) +#define pCAN_MB13_DATA0 ((volatile unsigned short *)CAN_MB13_DATA0) + +#define pCAN_MB14_ID1 ((volatile unsigned short *)CAN_MB14_ID1) +#define pCAN_MB14_ID0 ((volatile unsigned short *)CAN_MB14_ID0) +#define pCAN_MB14_TIMESTAMP ((volatile unsigned short *)CAN_MB14_TIMESTAMP) +#define pCAN_MB14_LENGTH ((volatile unsigned short *)CAN_MB14_LENGTH) +#define pCAN_MB14_DATA3 ((volatile unsigned short *)CAN_MB14_DATA3) +#define pCAN_MB14_DATA2 ((volatile unsigned short *)CAN_MB14_DATA2) +#define pCAN_MB14_DATA1 ((volatile unsigned short *)CAN_MB14_DATA1) +#define pCAN_MB14_DATA0 ((volatile unsigned short *)CAN_MB14_DATA0) + +#define pCAN_MB15_ID1 ((volatile unsigned short *)CAN_MB15_ID1) +#define pCAN_MB15_ID0 ((volatile unsigned short *)CAN_MB15_ID0) +#define pCAN_MB15_TIMESTAMP ((volatile unsigned short *)CAN_MB15_TIMESTAMP) +#define pCAN_MB15_LENGTH ((volatile unsigned short *)CAN_MB15_LENGTH) +#define pCAN_MB15_DATA3 ((volatile unsigned short *)CAN_MB15_DATA3) +#define pCAN_MB15_DATA2 ((volatile unsigned short *)CAN_MB15_DATA2) +#define pCAN_MB15_DATA1 ((volatile unsigned short *)CAN_MB15_DATA1) +#define pCAN_MB15_DATA0 ((volatile unsigned short *)CAN_MB15_DATA0) + +#define pCAN_MB16_ID1 ((volatile unsigned short *)CAN_MB16_ID1) +#define pCAN_MB16_ID0 ((volatile unsigned short *)CAN_MB16_ID0) +#define pCAN_MB16_TIMESTAMP ((volatile unsigned short *)CAN_MB16_TIMESTAMP) +#define pCAN_MB16_LENGTH ((volatile unsigned short *)CAN_MB16_LENGTH) +#define pCAN_MB16_DATA3 ((volatile unsigned short *)CAN_MB16_DATA3) +#define pCAN_MB16_DATA2 ((volatile unsigned short *)CAN_MB16_DATA2) +#define pCAN_MB16_DATA1 ((volatile unsigned short *)CAN_MB16_DATA1) +#define pCAN_MB16_DATA0 ((volatile unsigned short *)CAN_MB16_DATA0) + +#define pCAN_MB17_ID1 ((volatile unsigned short *)CAN_MB17_ID1) +#define pCAN_MB17_ID0 ((volatile unsigned short *)CAN_MB17_ID0) +#define pCAN_MB17_TIMESTAMP ((volatile unsigned short *)CAN_MB17_TIMESTAMP) +#define pCAN_MB17_LENGTH ((volatile unsigned short *)CAN_MB17_LENGTH) +#define pCAN_MB17_DATA3 ((volatile unsigned short *)CAN_MB17_DATA3) +#define pCAN_MB17_DATA2 ((volatile unsigned short *)CAN_MB17_DATA2) +#define pCAN_MB17_DATA1 ((volatile unsigned short *)CAN_MB17_DATA1) +#define pCAN_MB17_DATA0 ((volatile unsigned short *)CAN_MB17_DATA0) + +#define pCAN_MB18_ID1 ((volatile unsigned short *)CAN_MB18_ID1) +#define pCAN_MB18_ID0 ((volatile unsigned short *)CAN_MB18_ID0) +#define pCAN_MB18_TIMESTAMP ((volatile unsigned short *)CAN_MB18_TIMESTAMP) +#define pCAN_MB18_LENGTH ((volatile unsigned short *)CAN_MB18_LENGTH) +#define pCAN_MB18_DATA3 ((volatile unsigned short *)CAN_MB18_DATA3) +#define pCAN_MB18_DATA2 ((volatile unsigned short *)CAN_MB18_DATA2) +#define pCAN_MB18_DATA1 ((volatile unsigned short *)CAN_MB18_DATA1) +#define pCAN_MB18_DATA0 ((volatile unsigned short *)CAN_MB18_DATA0) + +#define pCAN_MB19_ID1 ((volatile unsigned short *)CAN_MB19_ID1) +#define pCAN_MB19_ID0 ((volatile unsigned short *)CAN_MB19_ID0) +#define pCAN_MB19_TIMESTAMP ((volatile unsigned short *)CAN_MB19_TIMESTAMP) +#define pCAN_MB19_LENGTH ((volatile unsigned short *)CAN_MB19_LENGTH) +#define pCAN_MB19_DATA3 ((volatile unsigned short *)CAN_MB19_DATA3) +#define pCAN_MB19_DATA2 ((volatile unsigned short *)CAN_MB19_DATA2) +#define pCAN_MB19_DATA1 ((volatile unsigned short *)CAN_MB19_DATA1) +#define pCAN_MB19_DATA0 ((volatile unsigned short *)CAN_MB19_DATA0) + +#define pCAN_MB20_ID1 ((volatile unsigned short *)CAN_MB20_ID1) +#define pCAN_MB20_ID0 ((volatile unsigned short *)CAN_MB20_ID0) +#define pCAN_MB20_TIMESTAMP ((volatile unsigned short *)CAN_MB20_TIMESTAMP) +#define pCAN_MB20_LENGTH ((volatile unsigned short *)CAN_MB20_LENGTH) +#define pCAN_MB20_DATA3 ((volatile unsigned short *)CAN_MB20_DATA3) +#define pCAN_MB20_DATA2 ((volatile unsigned short *)CAN_MB20_DATA2) +#define pCAN_MB20_DATA1 ((volatile unsigned short *)CAN_MB20_DATA1) +#define pCAN_MB20_DATA0 ((volatile unsigned short *)CAN_MB20_DATA0) + +#define pCAN_MB21_ID1 ((volatile unsigned short *)CAN_MB21_ID1) +#define pCAN_MB21_ID0 ((volatile unsigned short *)CAN_MB21_ID0) +#define pCAN_MB21_TIMESTAMP ((volatile unsigned short *)CAN_MB21_TIMESTAMP) +#define pCAN_MB21_LENGTH ((volatile unsigned short *)CAN_MB21_LENGTH) +#define pCAN_MB21_DATA3 ((volatile unsigned short *)CAN_MB21_DATA3) +#define pCAN_MB21_DATA2 ((volatile unsigned short *)CAN_MB21_DATA2) +#define pCAN_MB21_DATA1 ((volatile unsigned short *)CAN_MB21_DATA1) +#define pCAN_MB21_DATA0 ((volatile unsigned short *)CAN_MB21_DATA0) + +#define pCAN_MB22_ID1 ((volatile unsigned short *)CAN_MB22_ID1) +#define pCAN_MB22_ID0 ((volatile unsigned short *)CAN_MB22_ID0) +#define pCAN_MB22_TIMESTAMP ((volatile unsigned short *)CAN_MB22_TIMESTAMP) +#define pCAN_MB22_LENGTH ((volatile unsigned short *)CAN_MB22_LENGTH) +#define pCAN_MB22_DATA3 ((volatile unsigned short *)CAN_MB22_DATA3) +#define pCAN_MB22_DATA2 ((volatile unsigned short *)CAN_MB22_DATA2) +#define pCAN_MB22_DATA1 ((volatile unsigned short *)CAN_MB22_DATA1) +#define pCAN_MB22_DATA0 ((volatile unsigned short *)CAN_MB22_DATA0) + +#define pCAN_MB23_ID1 ((volatile unsigned short *)CAN_MB23_ID1) +#define pCAN_MB23_ID0 ((volatile unsigned short *)CAN_MB23_ID0) +#define pCAN_MB23_TIMESTAMP ((volatile unsigned short *)CAN_MB23_TIMESTAMP) +#define pCAN_MB23_LENGTH ((volatile unsigned short *)CAN_MB23_LENGTH) +#define pCAN_MB23_DATA3 ((volatile unsigned short *)CAN_MB23_DATA3) +#define pCAN_MB23_DATA2 ((volatile unsigned short *)CAN_MB23_DATA2) +#define pCAN_MB23_DATA1 ((volatile unsigned short *)CAN_MB23_DATA1) +#define pCAN_MB23_DATA0 ((volatile unsigned short *)CAN_MB23_DATA0) + +#define pCAN_MB24_ID1 ((volatile unsigned short *)CAN_MB24_ID1) +#define pCAN_MB24_ID0 ((volatile unsigned short *)CAN_MB24_ID0) +#define pCAN_MB24_TIMESTAMP ((volatile unsigned short *)CAN_MB24_TIMESTAMP) +#define pCAN_MB24_LENGTH ((volatile unsigned short *)CAN_MB24_LENGTH) +#define pCAN_MB24_DATA3 ((volatile unsigned short *)CAN_MB24_DATA3) +#define pCAN_MB24_DATA2 ((volatile unsigned short *)CAN_MB24_DATA2) +#define pCAN_MB24_DATA1 ((volatile unsigned short *)CAN_MB24_DATA1) +#define pCAN_MB24_DATA0 ((volatile unsigned short *)CAN_MB24_DATA0) + +#define pCAN_MB25_ID1 ((volatile unsigned short *)CAN_MB25_ID1) +#define pCAN_MB25_ID0 ((volatile unsigned short *)CAN_MB25_ID0) +#define pCAN_MB25_TIMESTAMP ((volatile unsigned short *)CAN_MB25_TIMESTAMP) +#define pCAN_MB25_LENGTH ((volatile unsigned short *)CAN_MB25_LENGTH) +#define pCAN_MB25_DATA3 ((volatile unsigned short *)CAN_MB25_DATA3) +#define pCAN_MB25_DATA2 ((volatile unsigned short *)CAN_MB25_DATA2) +#define pCAN_MB25_DATA1 ((volatile unsigned short *)CAN_MB25_DATA1) +#define pCAN_MB25_DATA0 ((volatile unsigned short *)CAN_MB25_DATA0) + +#define pCAN_MB26_ID1 ((volatile unsigned short *)CAN_MB26_ID1) +#define pCAN_MB26_ID0 ((volatile unsigned short *)CAN_MB26_ID0) +#define pCAN_MB26_TIMESTAMP ((volatile unsigned short *)CAN_MB26_TIMESTAMP) +#define pCAN_MB26_LENGTH ((volatile unsigned short *)CAN_MB26_LENGTH) +#define pCAN_MB26_DATA3 ((volatile unsigned short *)CAN_MB26_DATA3) +#define pCAN_MB26_DATA2 ((volatile unsigned short *)CAN_MB26_DATA2) +#define pCAN_MB26_DATA1 ((volatile unsigned short *)CAN_MB26_DATA1) +#define pCAN_MB26_DATA0 ((volatile unsigned short *)CAN_MB26_DATA0) + +#define pCAN_MB27_ID1 ((volatile unsigned short *)CAN_MB27_ID1) +#define pCAN_MB27_ID0 ((volatile unsigned short *)CAN_MB27_ID0) +#define pCAN_MB27_TIMESTAMP ((volatile unsigned short *)CAN_MB27_TIMESTAMP) +#define pCAN_MB27_LENGTH ((volatile unsigned short *)CAN_MB27_LENGTH) +#define pCAN_MB27_DATA3 ((volatile unsigned short *)CAN_MB27_DATA3) +#define pCAN_MB27_DATA2 ((volatile unsigned short *)CAN_MB27_DATA2) +#define pCAN_MB27_DATA1 ((volatile unsigned short *)CAN_MB27_DATA1) +#define pCAN_MB27_DATA0 ((volatile unsigned short *)CAN_MB27_DATA0) + +#define pCAN_MB28_ID1 ((volatile unsigned short *)CAN_MB28_ID1) +#define pCAN_MB28_ID0 ((volatile unsigned short *)CAN_MB28_ID0) +#define pCAN_MB28_TIMESTAMP ((volatile unsigned short *)CAN_MB28_TIMESTAMP) +#define pCAN_MB28_LENGTH ((volatile unsigned short *)CAN_MB28_LENGTH) +#define pCAN_MB28_DATA3 ((volatile unsigned short *)CAN_MB28_DATA3) +#define pCAN_MB28_DATA2 ((volatile unsigned short *)CAN_MB28_DATA2) +#define pCAN_MB28_DATA1 ((volatile unsigned short *)CAN_MB28_DATA1) +#define pCAN_MB28_DATA0 ((volatile unsigned short *)CAN_MB28_DATA0) + +#define pCAN_MB29_ID1 ((volatile unsigned short *)CAN_MB29_ID1) +#define pCAN_MB29_ID0 ((volatile unsigned short *)CAN_MB29_ID0) +#define pCAN_MB29_TIMESTAMP ((volatile unsigned short *)CAN_MB29_TIMESTAMP) +#define pCAN_MB29_LENGTH ((volatile unsigned short *)CAN_MB29_LENGTH) +#define pCAN_MB29_DATA3 ((volatile unsigned short *)CAN_MB29_DATA3) +#define pCAN_MB29_DATA2 ((volatile unsigned short *)CAN_MB29_DATA2) +#define pCAN_MB29_DATA1 ((volatile unsigned short *)CAN_MB29_DATA1) +#define pCAN_MB29_DATA0 ((volatile unsigned short *)CAN_MB29_DATA0) + +#define pCAN_MB30_ID1 ((volatile unsigned short *)CAN_MB30_ID1) +#define pCAN_MB30_ID0 ((volatile unsigned short *)CAN_MB30_ID0) +#define pCAN_MB30_TIMESTAMP ((volatile unsigned short *)CAN_MB30_TIMESTAMP) +#define pCAN_MB30_LENGTH ((volatile unsigned short *)CAN_MB30_LENGTH) +#define pCAN_MB30_DATA3 ((volatile unsigned short *)CAN_MB30_DATA3) +#define pCAN_MB30_DATA2 ((volatile unsigned short *)CAN_MB30_DATA2) +#define pCAN_MB30_DATA1 ((volatile unsigned short *)CAN_MB30_DATA1) +#define pCAN_MB30_DATA0 ((volatile unsigned short *)CAN_MB30_DATA0) + +#define pCAN_MB31_ID1 ((volatile unsigned short *)CAN_MB31_ID1) +#define pCAN_MB31_ID0 ((volatile unsigned short *)CAN_MB31_ID0) +#define pCAN_MB31_TIMESTAMP ((volatile unsigned short *)CAN_MB31_TIMESTAMP) +#define pCAN_MB31_LENGTH ((volatile unsigned short *)CAN_MB31_LENGTH) +#define pCAN_MB31_DATA3 ((volatile unsigned short *)CAN_MB31_DATA3) +#define pCAN_MB31_DATA2 ((volatile unsigned short *)CAN_MB31_DATA2) +#define pCAN_MB31_DATA1 ((volatile unsigned short *)CAN_MB31_DATA1) +#define pCAN_MB31_DATA0 ((volatile unsigned short *)CAN_MB31_DATA0) + +/* CAN Mailbox Area Macros */ +#define pCAN_MB_ID1(x) ((volatile unsigned short *)CAN_MB_ID1(x)) +#define pCAN_MB_ID0(x) ((volatile unsigned short *)CAN_MB_ID0(x)) +#define pCAN_MB_TIMESTAMP(x) ((volatile unsigned short *)CAN_MB_TIMESTAMP(x)) +#define pCAN_MB_LENGTH(x) ((volatile unsigned short *)CAN_MB_LENGTH(x)) +#define pCAN_MB_DATA3(x) ((volatile unsigned short *)CAN_MB_DATA3(x)) +#define pCAN_MB_DATA2(x) ((volatile unsigned short *)CAN_MB_DATA2(x)) +#define pCAN_MB_DATA1(x) ((volatile unsigned short *)CAN_MB_DATA1(x)) +#define pCAN_MB_DATA0(x) ((volatile unsigned short *)CAN_MB_DATA0(x)) + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define pPORTF_FER ((volatile unsigned short *)PORTF_FER) +#define pPORTG_FER ((volatile unsigned short *)PORTG_FER) +#define pPORTH_FER ((volatile unsigned short *)PORTH_FER) +#define pPORT_MUX ((volatile unsigned short *)PORT_MUX) + +#define PORTF_UART0_TX 0x0001 +#define PORTF_UART0_RX 0x0002 + +#define PORT_MUX_PFDE 0x0040 /* 0: Enable UART0 RX, UART0 TX; 1: Enable DMAR0, DMAr1 */ + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define pHMDMA0_CONTROL ((volatile unsigned short *)HMDMA0_CONTROL) +#define pHMDMA0_ECINIT ((volatile unsigned short *)HMDMA0_ECINIT) +#define pHMDMA0_BCINIT ((volatile unsigned short *)HMDMA0_BCINIT) +#define pHMDMA0_ECURGENT ((volatile unsigned short *)HMDMA0_ECURGENT) +#define pHMDMA0_ECOVERFLOW ((volatile unsigned short *)HMDMA0_ECOVERFLOW) +#define pHMDMA0_ECOUNT ((volatile unsigned short *)HMDMA0_ECOUNT) +#define pHMDMA0_BCOUNT ((volatile unsigned short *)HMDMA0_BCOUNT) + +#define pHMDMA1_CONTROL ((volatile unsigned short *)HMDMA1_CONTROL) +#define pHMDMA1_ECINIT ((volatile unsigned short *)HMDMA1_ECINIT) +#define pHMDMA1_BCINIT ((volatile unsigned short *)HMDMA1_BCINIT) +#define pHMDMA1_ECURGENT ((volatile unsigned short *)HMDMA1_ECURGENT) +#define pHMDMA1_ECOVERFLOW ((volatile unsigned short *)HMDMA1_ECOVERFLOW) +#define pHMDMA1_ECOUNT ((volatile unsigned short *)HMDMA1_ECOUNT) +#define pHMDMA1_BCOUNT ((volatile unsigned short *)HMDMA1_BCOUNT) + +#endif /* _CDEF_BF534_H */ diff --git a/include/asm-blackfin/arch-bf537/cdefBF537.h b/include/asm-blackfin/arch-bf537/cdefBF537.h new file mode 100644 index 0000000..3de1d93 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/cdefBF537.h @@ -0,0 +1,186 @@ +/* + * Copyright (C) 2004 Analog Devices Inc., All Rights Reserved. + * + *********************************************************************************** + * + * This include file contains a list of macro "defines" to enable the programmer + * to use symbolic names for register-access. + * + * ---------------------------- + * revision 0.1 + * date: 2004/03/01 21:23:01; author: joeb + * Initial revision + * + * ---------------------------- + * revision 0.2 + * date: 2004/05/15 16:30:00; author: joeb + * comments: removed I2C/IIC references to TWI, changed GPIO sections + * + * ---------------------------- + * revision 0.3 + * date: 2004/06/08 12:25:00; author: joeb + * comments: renamed some TWI and GPIO registers + * + * ---------------------------- + * revision 0.4 + * date: 2004/06/09 14:25:00; author: joeb + * comments: changed Timer status register to 32-bit, renamed EMAC count registers + * + * ---------------------------- + * revision 0.5 + * date: 2004/08/10 10:25:00; author: joeb + * comments: Renamed EMAC wake-up registers, changed bit-names in EMAC registers + * + * ---------------------------- + * revision 0.6 + * date: 2004/08/17 16:25:00; author: joeb + * comments: Renamed TWI_INT_ENABLE to TWI_INT_MASK + * + * ---------------------------- + * revision 0.7 + * date: 2004/08/18 13:21:00; author: joeb + * comments: Renamed GPIO registers to remove _D, _S, _C, _T suffixes + * + * ---------------------------- + * revision 0.8 + * date: 2004/08/20 10:27:00; author: joeb + * comments: Renamed External DMA to Handshake DMA + * + * ---------------------------- + * revision 0.9 + * date: 2004/08/23 13:42:00; author: joeb + * comments: Renamed Handshake DMA Register Set + * + * ---------------------------- + * revision 0.10 + * date: 2004/10/28 15:40:00; author: joeb + * comments: Shortened EMAC Count Register Names + * + * ---------------------------- + * revision 0.11 + * date: 2004/12/13 11:05:00; author: joeb + * comments: Fixed address pointers - (volatile void **) to (void * volatile *) + * + * ---------------------------- + * revision 0.12 + * date: 2004/12/17 14:25:00; author: joeb + * comments: Replaced C++ Single-Line Comments w/C-standard Comments + * Changed EMAC EQ1024 TX/RX References to GE1024 + * + * ---------------------------- + * revision 0.13 + * date: 2005/01/05 10:50:00; author: joeb + * comments: Removed excess white space in CAN_AM section + * Added support for CAN Macros to Index AM and Mailbox Areas + * + * ---------------------------- + * revision 0.14 + * date: 2005/01/26 14:10:00; author: joeb + * comments: Fixed Typo In EMAC_RXC_PAUSE register + * + * ---------------------------- + * revision 0.15 + * date: 2005/01/27 14:41:00; author: joeb + * comments: Moved Common MMRs to cdefBF534.h + */ + +/* + * System MMR Register Map + */ + +#ifndef _CDEF_BF537_H +#define _CDEF_BF537_H + +/* Include MMRs Common to BF534 */ +#include <asm/arch-bf537/cdefBF534.h> + +/* Include all Core registers and bit definitions */ +#include <asm/arch-bf537/defBF537.h> + +/* Include Macro "Defines" For EMAC (Unique to BF536/BF537 */ +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ +#define pEMAC_OPMODE ((volatile unsigned long *)EMAC_OPMODE) +#define pEMAC_ADDRLO ((volatile unsigned long *)EMAC_ADDRLO) +#define pEMAC_ADDRHI ((volatile unsigned long *)EMAC_ADDRHI) +#define pEMAC_HASHLO ((volatile unsigned long *)EMAC_HASHLO) +#define pEMAC_HASHHI ((volatile unsigned long *)EMAC_HASHHI) +#define pEMAC_STAADD ((volatile unsigned long *)EMAC_STAADD) +#define pEMAC_STADAT ((volatile unsigned long *)EMAC_STADAT) +#define pEMAC_FLC ((volatile unsigned long *)EMAC_FLC) +#define pEMAC_VLAN1 ((volatile unsigned long *)EMAC_VLAN1) +#define pEMAC_VLAN2 ((volatile unsigned long *)EMAC_VLAN2) +#define pEMAC_WKUP_CTL ((volatile unsigned long *)EMAC_WKUP_CTL) +#define pEMAC_WKUP_FFMSK0 ((volatile unsigned long *)EMAC_WKUP_FFMSK0) +#define pEMAC_WKUP_FFMSK1 ((volatile unsigned long *)EMAC_WKUP_FFMSK1) +#define pEMAC_WKUP_FFMSK2 ((volatile unsigned long *)EMAC_WKUP_FFMSK2) +#define pEMAC_WKUP_FFMSK3 ((volatile unsigned long *)EMAC_WKUP_FFMSK3) +#define pEMAC_WKUP_FFCMD ((volatile unsigned long *)EMAC_WKUP_FFCMD) +#define pEMAC_WKUP_FFOFF ((volatile unsigned long *)EMAC_WKUP_FFOFF) +#define pEMAC_WKUP_FFCRC0 ((volatile unsigned long *)EMAC_WKUP_FFCRC0) +#define pEMAC_WKUP_FFCRC1 ((volatile unsigned long *)EMAC_WKUP_FFCRC1) + +#define pEMAC_SYSCTL ((volatile unsigned long *)EMAC_SYSCTL) +#define pEMAC_SYSTAT ((volatile unsigned long *)EMAC_SYSTAT) +#define pEMAC_RX_STAT ((volatile unsigned long *)EMAC_RX_STAT) +#define pEMAC_RX_STKY ((volatile unsigned long *)EMAC_RX_STKY) +#define pEMAC_RX_IRQE ((volatile unsigned long *)EMAC_RX_IRQE) +#define pEMAC_TX_STAT ((volatile unsigned long *)EMAC_TX_STAT) +#define pEMAC_TX_STKY ((volatile unsigned long *)EMAC_TX_STKY) +#define pEMAC_TX_IRQE ((volatile unsigned long *)EMAC_TX_IRQE) + +#define pEMAC_MMC_CTL ((volatile unsigned long *)EMAC_MMC_CTL) +#define pEMAC_MMC_RIRQS ((volatile unsigned long *)EMAC_MMC_RIRQS) +#define pEMAC_MMC_RIRQE ((volatile unsigned long *)EMAC_MMC_RIRQE) +#define pEMAC_MMC_TIRQS ((volatile unsigned long *)EMAC_MMC_TIRQS) +#define pEMAC_MMC_TIRQE ((volatile unsigned long *)EMAC_MMC_TIRQE) + +#define pEMAC_RXC_OK ((volatile unsigned long *)EMAC_RXC_OK) +#define pEMAC_RXC_FCS ((volatile unsigned long *)EMAC_RXC_FCS) +#define pEMAC_RXC_ALIGN ((volatile unsigned long *)EMAC_RXC_ALIGN) +#define pEMAC_RXC_OCTET ((volatile unsigned long *)EMAC_RXC_OCTET) +#define pEMAC_RXC_DMAOVF ((volatile unsigned long *)EMAC_RXC_DMAOVF) +#define pEMAC_RXC_UNICST ((volatile unsigned long *)EMAC_RXC_UNICST) +#define pEMAC_RXC_MULTI ((volatile unsigned long *)EMAC_RXC_MULTI) +#define pEMAC_RXC_BROAD ((volatile unsigned long *)EMAC_RXC_BROAD) +#define pEMAC_RXC_LNERRI ((volatile unsigned long *)EMAC_RXC_LNERRI) +#define pEMAC_RXC_LNERRO ((volatile unsigned long *)EMAC_RXC_LNERRO) +#define pEMAC_RXC_LONG ((volatile unsigned long *)EMAC_RXC_LONG) +#define pEMAC_RXC_MACCTL ((volatile unsigned long *)EMAC_RXC_MACCTL) +#define pEMAC_RXC_OPCODE ((volatile unsigned long *)EMAC_RXC_OPCODE) +#define pEMAC_RXC_PAUSE ((volatile unsigned long *)EMAC_RXC_PAUSE) +#define pEMAC_RXC_ALLFRM ((volatile unsigned long *)EMAC_RXC_ALLFRM) +#define pEMAC_RXC_ALLOCT ((volatile unsigned long *)EMAC_RXC_ALLOCT) +#define pEMAC_RXC_TYPED ((volatile unsigned long *)EMAC_RXC_TYPED) +#define pEMAC_RXC_SHORT ((volatile unsigned long *)EMAC_RXC_SHORT) +#define pEMAC_RXC_EQ64 ((volatile unsigned long *)EMAC_RXC_EQ64) +#define pEMAC_RXC_LT128 ((volatile unsigned long *)EMAC_RXC_LT128) +#define pEMAC_RXC_LT256 ((volatile unsigned long *)EMAC_RXC_LT256) +#define pEMAC_RXC_LT512 ((volatile unsigned long *)EMAC_RXC_LT512) +#define pEMAC_RXC_LT1024 ((volatile unsigned long *)EMAC_RXC_LT1024) +#define pEMAC_RXC_GE1024 ((volatile unsigned long *)EMAC_RXC_GE1024) + +#define pEMAC_TXC_OK ((volatile unsigned long *)EMAC_TXC_OK) +#define pEMAC_TXC_1COL ((volatile unsigned long *)EMAC_TXC_1COL) +#define pEMAC_TXC_GT1COL ((volatile unsigned long *)EMAC_TXC_GT1COL) +#define pEMAC_TXC_OCTET ((volatile unsigned long *)EMAC_TXC_OCTET) +#define pEMAC_TXC_DEFER ((volatile unsigned long *)EMAC_TXC_DEFER) +#define pEMAC_TXC_LATECL ((volatile unsigned long *)EMAC_TXC_LATECL) +#define pEMAC_TXC_XS_COL ((volatile unsigned long *)EMAC_TXC_XS_COL) +#define pEMAC_TXC_DMAUND ((volatile unsigned long *)EMAC_TXC_DMAUND) +#define pEMAC_TXC_CRSERR ((volatile unsigned long *)EMAC_TXC_CRSERR) +#define pEMAC_TXC_UNICST ((volatile unsigned long *)EMAC_TXC_UNICST) +#define pEMAC_TXC_MULTI ((volatile unsigned long *)EMAC_TXC_MULTI) +#define pEMAC_TXC_BROAD ((volatile unsigned long *)EMAC_TXC_BROAD) +#define pEMAC_TXC_XS_DFR ((volatile unsigned long *)EMAC_TXC_XS_DFR) +#define pEMAC_TXC_MACCTL ((volatile unsigned long *)EMAC_TXC_MACCTL) +#define pEMAC_TXC_ALLFRM ((volatile unsigned long *)EMAC_TXC_ALLFRM) +#define pEMAC_TXC_ALLOCT ((volatile unsigned long *)EMAC_TXC_ALLOCT) +#define pEMAC_TXC_EQ64 ((volatile unsigned long *)EMAC_TXC_EQ64) +#define pEMAC_TXC_LT128 ((volatile unsigned long *)EMAC_TXC_LT128) +#define pEMAC_TXC_LT256 ((volatile unsigned long *)EMAC_TXC_LT256) +#define pEMAC_TXC_LT512 ((volatile unsigned long *)EMAC_TXC_LT512) +#define pEMAC_TXC_LT1024 ((volatile unsigned long *)EMAC_TXC_LT1024) +#define pEMAC_TXC_GE1024 ((volatile unsigned long *)EMAC_TXC_GE1024) +#define pEMAC_TXC_ABORT ((volatile unsigned long *)EMAC_TXC_ABORT) + +#endif /* _CDEF_BF537_H */ diff --git a/include/asm-blackfin/arch-bf537/cplbtab.h b/include/asm-blackfin/arch-bf537/cplbtab.h new file mode 100644 index 0000000..c5151bb --- /dev/null +++ b/include/asm-blackfin/arch-bf537/cplbtab.h @@ -0,0 +1,408 @@ +/*This file is subject to the terms and conditions of the GNU General Public + * License. + * + * Blackfin BF533/2.6 support : LG Soft India + * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd + * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's + * shouldn't be victimized. cplbmgr.S search logic is corrected + * to findout the appropriate victim. + * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC + * : LG Soft India + */ +#include <config.h> + +#ifndef __ARCH_BFINNOMMU_CPLBTAB_H +#define __ARCH_BFINNOMMU_CPLBTAB_H + +/* + * ICPLB TABLE + */ + +.data +/* This table is configurable */ + .align 4; + +/* Data Attibutes*/ + +#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) +#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158 0x200 +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) + +#else /*Write Through */ +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) +#endif + +.align 4; +.global _ipdt_table _ipdt_table:.byte4 0x00000000; +.byte4(SDRAM_IKERNEL); /*SDRAM_Page0 */ +.byte4 0x00400000; +.byte4(SDRAM_IKERNEL); /*SDRAM_Page1 */ +.byte4 0x00800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page2 */ +.byte4 0x00C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page3 */ +.byte4 0x01000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page4 */ +.byte4 0x01400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page5 */ +.byte4 0x01800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page6 */ +.byte4 0x01C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page7 */ +.byte4 0x02000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page8 */ +.byte4 0x02400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page9 */ +.byte4 0x02800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page10 */ +.byte4 0x02C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page11 */ +.byte4 0x03000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page12 */ +.byte4 0x03400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page13 */ +.byte4 0x03800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page14 */ +.byte4 0x03C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page15 */ +.byte4 0x20000000; +.byte4(SDRAM_EBIU); /* Async Memory Bank 2 (Secnd) */ + +.byte4 0xffffffff; /* end of section - termination */ + +/* + * PAGE DESCRIPTOR TABLE + * + */ + +/* + * Till here we are discussing about the static memory management model. + * However, the operating envoronments commonly define more CPLB + * descriptors to cover the entire addressable memory than will fit into + * the available on-chip 16 CPLB MMRs. When this happens, the below table + * will be used which will hold all the potentially required CPLB descriptors + * + * This is how Page descriptor Table is implemented in uClinux/Blackfin. + */ +.global _dpdt_table _dpdt_table:.byte4 0x00000000; +.byte4(SDRAM_DKERNEL); /*SDRAM_Page0 */ +.byte4 0x00400000; +.byte4(SDRAM_DKERNEL); /*SDRAM_Page1 */ +.byte4 0x00800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page2 */ +.byte4 0x00C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page3 */ +.byte4 0x01000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page4 */ +.byte4 0x01400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page5 */ +.byte4 0x01800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page6 */ +.byte4 0x01C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page7 */ +.byte4 0x02000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page8 */ +.byte4 0x02400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page9 */ +.byte4 0x02800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page10 */ +.byte4 0x02C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page11 */ +.byte4 0x03000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page12 */ +.byte4 0x03400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page13 */ +.byte4 0x03800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page14 */ +.byte4 0x03C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page15 */ +.byte4 0x20000000; +.byte4(SDRAM_EBIU); /* Async Memory Bank 0 (Prim A) */ + +#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537)) +.byte4 0xFF800000; +.byte4(L1_DMEMORY); +.byte4 0xFF801000; +.byte4(L1_DMEMORY); +.byte4 0xFF802000; +.byte4(L1_DMEMORY); +.byte4 0xFF803000; +.byte4(L1_DMEMORY); +#endif +.byte4 0xFF804000; +.byte4(L1_DMEMORY); +.byte4 0xFF805000; +.byte4(L1_DMEMORY); +.byte4 0xFF806000; +.byte4(L1_DMEMORY); +.byte4 0xFF807000; +.byte4(L1_DMEMORY); +#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537)) +.byte4 0xFF900000; +.byte4(L1_DMEMORY); +.byte4 0xFF901000; +.byte4(L1_DMEMORY); +.byte4 0xFF902000; +.byte4(L1_DMEMORY); +.byte4 0xFF903000; +.byte4(L1_DMEMORY); +#endif +.byte4 0xFF904000; +.byte4(L1_DMEMORY); +.byte4 0xFF905000; +.byte4(L1_DMEMORY); +.byte4 0xFF906000; +.byte4(L1_DMEMORY); +.byte4 0xFF907000; +.byte4(L1_DMEMORY); + +.byte4 0xFFB00000; +.byte4(L1_DMEMORY); + +.byte4 0xffffffff; /*end of section - termination */ + +#ifdef CONFIG_CPLB_INFO +.global _ipdt_swapcount_table; /* swapin count first, then swapout count */ +_ipdt_swapcount_table: +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 10 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 20 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 30 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 40 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 50 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 60 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 70 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 90 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 100 */ + +.global _dpdt_swapcount_table; /* swapin count first, then swapout count */ +_dpdt_swapcount_table: +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 10 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 20 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 30 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 40 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 50 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 60 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 70 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 100 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 110 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 120 */ + +#endif + +#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/arch-bf537/defBF534.h b/include/asm-blackfin/arch-bf537/defBF534.h new file mode 100644 index 0000000..c603d44 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/defBF534.h @@ -0,0 +1,2627 @@ +/* + * Copyright (C) 2004 Analog Devices Inc., All Rights Reserved. + * + *********************************************************************************** + * + * This include file contains a list of macro "defines" to enable the programmer + * to use symbolic names for register-access and bit-manipulation. + * + * ---------------------------- + * revision 0.1 + * date: 2004/03/01 21:23:01; author: joeb + * Initial revision + * + */ +#ifndef _DEF_BF534_H +#define _DEF_BF534_H + +/* Include all Core registers and bit definitions */ +#include <asm/arch-common/def_LPBlackfin.h> + +#define LO(con32) ((con32) & 0xFFFF) +#define lo(con32) ((con32) & 0xFFFF) +#define HI(con32) (((con32) >> 16) & 0xFFFF) +#define hi(con32) (((con32) >> 16) & 0xFFFF) + +/* + * System MMR Register Map + */ +/* Clock and System Control (0xFFC00000 - 0xFFC000FF)*/ +#define PLL_CTL 0xFFC00000 /* PLL Control Register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define CHIPID 0xFFC00014 /* Chip ID register (32-bit) */ +#define PLL_STAT 0xFFC0000C /* PLL Status Register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register */ +#define SYSCR 0xFFC00104 /* System Configuration Register */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ +#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */ + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART0_THR 0xFFC00400 /* Transmit Holding register */ +#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART0_LCR 0xFFC0040C /* Line Control Register */ +#define UART0_MCR 0xFFC00410 /* Modem Control Register */ +#define UART0_LSR 0xFFC00414 /* Line Status Register */ +#define UART0_MSR 0xFFC00418 /* Modem Status Register */ +#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART0_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ + +#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ + +#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ + +#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */ + +#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ + +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ +#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ +#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ +#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ +#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ +#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ +#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ +#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ +#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ +#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ +#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ +#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ +#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ +#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ +#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ +#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ +#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* DMA Traffic Control Registers */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ + +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ + +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ + +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ + +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ + +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ + +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ + +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ + +#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ + +#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ + +#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ + +#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ + +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ + +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ + +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ + +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ +#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ +#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ +#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ +#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ +#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ +#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ +#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ +#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ +#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ +#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ +#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ +#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ +#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ +#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ +#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ +#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ +#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ +#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ +#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ +#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ +#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ +#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ +#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ +#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ +#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ +#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ +#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ +#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ +#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ +#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ +#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ +#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define UART1_THR 0xFFC02000 /* Transmit Holding register */ +#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ +#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ +#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ +#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ +#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ +#define UART1_LCR 0xFFC0200C /* Line Control Register */ +#define UART1_MCR 0xFFC02010 /* Modem Control Register */ +#define UART1_LSR 0xFFC02014 /* Line Status Register */ +#define UART1_MSR 0xFFC02018 /* Modem Status Register */ +#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ +#define UART1_GCTL 0xFFC02024 /* Global Control Register */ + +/* CAN Controller (0xFFC02A00 - 0xFFC02FFF) */ +/* For Mailboxes 0-15 */ +#define CAN_MC1 0xFFC02A00 /* Mailbox config reg 1 */ +#define CAN_MD1 0xFFC02A04 /* Mailbox direction reg 1 */ +#define CAN_TRS1 0xFFC02A08 /* Transmit Request Set reg 1 */ +#define CAN_TRR1 0xFFC02A0C /* Transmit Request Reset reg 1 */ +#define CAN_TA1 0xFFC02A10 /* Transmit Acknowledge reg 1 */ +#define CAN_AA1 0xFFC02A14 /* Transmit Abort Acknowledge reg 1 */ +#define CAN_RMP1 0xFFC02A18 /* Receive Message Pending reg 1 */ +#define CAN_RML1 0xFFC02A1C /* Receive Message Lost reg 1 */ +#define CAN_MBTIF1 0xFFC02A20 /* Mailbox Transmit Interrupt Flag reg 1 */ +#define CAN_MBRIF1 0xFFC02A24 /* Mailbox Receive Interrupt Flag reg 1 */ +#define CAN_MBIM1 0xFFC02A28 /* Mailbox Interrupt Mask reg 1 */ +#define CAN_RFH1 0xFFC02A2C /* Remote Frame Handling reg 1 */ +#define CAN_OPSS1 0xFFC02A30 /* Overwrite Protection Single Shot Xmit reg 1 */ + +/* For Mailboxes 16-31 */ +#define CAN_MC2 0xFFC02A40 /* Mailbox config reg 2 */ +#define CAN_MD2 0xFFC02A44 /* Mailbox direction reg 2 */ +#define CAN_TRS2 0xFFC02A48 /* Transmit Request Set reg 2 */ +#define CAN_TRR2 0xFFC02A4C /* Transmit Request Reset reg 2 */ +#define CAN_TA2 0xFFC02A50 /* Transmit Acknowledge reg 2 */ +#define CAN_AA2 0xFFC02A54 /* Transmit Abort Acknowledge reg 2 */ +#define CAN_RMP2 0xFFC02A58 /* Receive Message Pending reg 2 */ +#define CAN_RML2 0xFFC02A5C /* Receive Message Lost reg 2 */ +#define CAN_MBTIF2 0xFFC02A60 /* Mailbox Transmit Interrupt Flag reg 2 */ +#define CAN_MBRIF2 0xFFC02A64 /* Mailbox Receive Interrupt Flag reg 2 */ +#define CAN_MBIM2 0xFFC02A68 /* Mailbox Interrupt Mask reg 2 */ +#define CAN_RFH2 0xFFC02A6C /* Remote Frame Handling reg 2 */ +#define CAN_OPSS2 0xFFC02A70 /* Overwrite Protection Single Shot Xmit reg 2 */ + +/* CAN Configuration, Control, and Status Registers */ +#define CAN_CLOCK 0xFFC02A80 /* Bit Timing Configuration register 0 */ +#define CAN_TIMING 0xFFC02A84 /* Bit Timing Configuration register 1 */ +#define CAN_DEBUG 0xFFC02A88 /* Debug Register */ +#define CAN_STATUS 0xFFC02A8C /* Global Status Register */ +#define CAN_CEC 0xFFC02A90 /* Error Counter Register */ +#define CAN_GIS 0xFFC02A94 /* Global Interrupt Status Register */ +#define CAN_GIM 0xFFC02A98 /* Global Interrupt Mask Register */ +#define CAN_GIF 0xFFC02A9C /* Global Interrupt Flag Register */ +#define CAN_CONTROL 0xFFC02AA0 /* Master Control Register */ +#define CAN_INTR 0xFFC02AA4 /* Interrupt Pending Register */ +#define CAN_SFCMVER 0xFFC02AA8 /* Version Code Register */ +#define CAN_MBTD 0xFFC02AAC /* Mailbox Temporary Disable Feature */ +#define CAN_EWR 0xFFC02AB0 /* Programmable Warning Level */ +#define CAN_ESR 0xFFC02AB4 /* Error Status Register */ +#define CAN_UCREG 0xFFC02AC0 /* Universal Counter Register/Capture Register */ +#define CAN_UCCNT 0xFFC02AC4 /* Universal Counter */ +#define CAN_UCRC 0xFFC02AC8 /* Universal Counter Force Reload Register */ +#define CAN_UCCNF 0xFFC02ACC /* Universal Counter Configuration Register */ + +/* Mailbox Acceptance Masks */ +#define CAN_AM00L 0xFFC02B00 /* Mailbox 0 Low Acceptance Mask */ +#define CAN_AM00H 0xFFC02B04 /* Mailbox 0 High Acceptance Mask */ +#define CAN_AM01L 0xFFC02B08 /* Mailbox 1 Low Acceptance Mask */ +#define CAN_AM01H 0xFFC02B0C /* Mailbox 1 High Acceptance Mask */ +#define CAN_AM02L 0xFFC02B10 /* Mailbox 2 Low Acceptance Mask */ +#define CAN_AM02H 0xFFC02B14 /* Mailbox 2 High Acceptance Mask */ +#define CAN_AM03L 0xFFC02B18 /* Mailbox 3 Low Acceptance Mask */ +#define CAN_AM03H 0xFFC02B1C /* Mailbox 3 High Acceptance Mask */ +#define CAN_AM04L 0xFFC02B20 /* Mailbox 4 Low Acceptance Mask */ +#define CAN_AM04H 0xFFC02B24 /* Mailbox 4 High Acceptance Mask */ +#define CAN_AM05L 0xFFC02B28 /* Mailbox 5 Low Acceptance Mask */ +#define CAN_AM05H 0xFFC02B2C /* Mailbox 5 High Acceptance Mask */ +#define CAN_AM06L 0xFFC02B30 /* Mailbox 6 Low Acceptance Mask */ +#define CAN_AM06H 0xFFC02B34 /* Mailbox 6 High Acceptance Mask */ +#define CAN_AM07L 0xFFC02B38 /* Mailbox 7 Low Acceptance Mask */ +#define CAN_AM07H 0xFFC02B3C /* Mailbox 7 High Acceptance Mask */ +#define CAN_AM08L 0xFFC02B40 /* Mailbox 8 Low Acceptance Mask */ +#define CAN_AM08H 0xFFC02B44 /* Mailbox 8 High Acceptance Mask */ +#define CAN_AM09L 0xFFC02B48 /* Mailbox 9 Low Acceptance Mask */ +#define CAN_AM09H 0xFFC02B4C /* Mailbox 9 High Acceptance Mask */ +#define CAN_AM10L 0xFFC02B50 /* Mailbox 10 Low Acceptance Mask */ +#define CAN_AM10H 0xFFC02B54 /* Mailbox 10 High Acceptance Mask */ +#define CAN_AM11L 0xFFC02B58 /* Mailbox 11 Low Acceptance Mask */ +#define CAN_AM11H 0xFFC02B5C /* Mailbox 11 High Acceptance Mask */ +#define CAN_AM12L 0xFFC02B60 /* Mailbox 12 Low Acceptance Mask */ +#define CAN_AM12H 0xFFC02B64 /* Mailbox 12 High Acceptance Mask */ +#define CAN_AM13L 0xFFC02B68 /* Mailbox 13 Low Acceptance Mask */ +#define CAN_AM13H 0xFFC02B6C /* Mailbox 13 High Acceptance Mask */ +#define CAN_AM14L 0xFFC02B70 /* Mailbox 14 Low Acceptance Mask */ +#define CAN_AM14H 0xFFC02B74 /* Mailbox 14 High Acceptance Mask */ +#define CAN_AM15L 0xFFC02B78 /* Mailbox 15 Low Acceptance Mask */ +#define CAN_AM15H 0xFFC02B7C /* Mailbox 15 High Acceptance Mask */ + +#define CAN_AM16L 0xFFC02B80 /* Mailbox 16 Low Acceptance Mask */ +#define CAN_AM16H 0xFFC02B84 /* Mailbox 16 High Acceptance Mask */ +#define CAN_AM17L 0xFFC02B88 /* Mailbox 17 Low Acceptance Mask */ +#define CAN_AM17H 0xFFC02B8C /* Mailbox 17 High Acceptance Mask */ +#define CAN_AM18L 0xFFC02B90 /* Mailbox 18 Low Acceptance Mask */ +#define CAN_AM18H 0xFFC02B94 /* Mailbox 18 High Acceptance Mask */ +#define CAN_AM19L 0xFFC02B98 /* Mailbox 19 Low Acceptance Mask */ +#define CAN_AM19H 0xFFC02B9C /* Mailbox 19 High Acceptance Mask */ +#define CAN_AM20L 0xFFC02BA0 /* Mailbox 20 Low Acceptance Mask */ +#define CAN_AM20H 0xFFC02BA4 /* Mailbox 20 High Acceptance Mask */ +#define CAN_AM21L 0xFFC02BA8 /* Mailbox 21 Low Acceptance Mask */ +#define CAN_AM21H 0xFFC02BAC /* Mailbox 21 High Acceptance Mask */ +#define CAN_AM22L 0xFFC02BB0 /* Mailbox 22 Low Acceptance Mask */ +#define CAN_AM22H 0xFFC02BB4 /* Mailbox 22 High Acceptance Mask */ +#define CAN_AM23L 0xFFC02BB8 /* Mailbox 23 Low Acceptance Mask */ +#define CAN_AM23H 0xFFC02BBC /* Mailbox 23 High Acceptance Mask */ +#define CAN_AM24L 0xFFC02BC0 /* Mailbox 24 Low Acceptance Mask */ +#define CAN_AM24H 0xFFC02BC4 /* Mailbox 24 High Acceptance Mask */ +#define CAN_AM25L 0xFFC02BC8 /* Mailbox 25 Low Acceptance Mask */ +#define CAN_AM25H 0xFFC02BCC /* Mailbox 25 High Acceptance Mask */ +#define CAN_AM26L 0xFFC02BD0 /* Mailbox 26 Low Acceptance Mask */ +#define CAN_AM26H 0xFFC02BD4 /* Mailbox 26 High Acceptance Mask */ +#define CAN_AM27L 0xFFC02BD8 /* Mailbox 27 Low Acceptance Mask */ +#define CAN_AM27H 0xFFC02BDC /* Mailbox 27 High Acceptance Mask */ +#define CAN_AM28L 0xFFC02BE0 /* Mailbox 28 Low Acceptance Mask */ +#define CAN_AM28H 0xFFC02BE4 /* Mailbox 28 High Acceptance Mask */ +#define CAN_AM29L 0xFFC02BE8 /* Mailbox 29 Low Acceptance Mask */ +#define CAN_AM29H 0xFFC02BEC /* Mailbox 29 High Acceptance Mask */ +#define CAN_AM30L 0xFFC02BF0 /* Mailbox 30 Low Acceptance Mask */ +#define CAN_AM30H 0xFFC02BF4 /* Mailbox 30 High Acceptance Mask */ +#define CAN_AM31L 0xFFC02BF8 /* Mailbox 31 Low Acceptance Mask */ +#define CAN_AM31H 0xFFC02BFC /* Mailbox 31 High Acceptance Mask */ + +/* CAN Acceptance Mask Macros */ +#define CAN_AM_L(x) (CAN_AM00L+((x)*0x8)) +#define CAN_AM_H(x) (CAN_AM00H+((x)*0x8)) + +/* Mailbox Registers */ +#define CAN_MB00_DATA0 0xFFC02C00 /* Mailbox 0 Data Word 0 [15:0] Register */ +#define CAN_MB00_DATA1 0xFFC02C04 /* Mailbox 0 Data Word 1 [31:16] Register */ +#define CAN_MB00_DATA2 0xFFC02C08 /* Mailbox 0 Data Word 2 [47:32] Register */ +#define CAN_MB00_DATA3 0xFFC02C0C /* Mailbox 0 Data Word 3 [63:48] Register */ +#define CAN_MB00_LENGTH 0xFFC02C10 /* Mailbox 0 Data Length Code Register */ +#define CAN_MB00_TIMESTAMP 0xFFC02C14 /* Mailbox 0 Time Stamp Value Register */ +#define CAN_MB00_ID0 0xFFC02C18 /* Mailbox 0 Identifier Low Register */ +#define CAN_MB00_ID1 0xFFC02C1C /* Mailbox 0 Identifier High Register */ + +#define CAN_MB01_DATA0 0xFFC02C20 /* Mailbox 1 Data Word 0 [15:0] Register */ +#define CAN_MB01_DATA1 0xFFC02C24 /* Mailbox 1 Data Word 1 [31:16] Register */ +#define CAN_MB01_DATA2 0xFFC02C28 /* Mailbox 1 Data Word 2 [47:32] Register */ +#define CAN_MB01_DATA3 0xFFC02C2C /* Mailbox 1 Data Word 3 [63:48] Register */ +#define CAN_MB01_LENGTH 0xFFC02C30 /* Mailbox 1 Data Length Code Register */ +#define CAN_MB01_TIMESTAMP 0xFFC02C34 /* Mailbox 1 Time Stamp Value Register */ +#define CAN_MB01_ID0 0xFFC02C38 /* Mailbox 1 Identifier Low Register */ +#define CAN_MB01_ID1 0xFFC02C3C /* Mailbox 1 Identifier High Register */ + +#define CAN_MB02_DATA0 0xFFC02C40 /* Mailbox 2 Data Word 0 [15:0] Register */ +#define CAN_MB02_DATA1 0xFFC02C44 /* Mailbox 2 Data Word 1 [31:16] Register */ +#define CAN_MB02_DATA2 0xFFC02C48 /* Mailbox 2 Data Word 2 [47:32] Register */ +#define CAN_MB02_DATA3 0xFFC02C4C /* Mailbox 2 Data Word 3 [63:48] Register */ +#define CAN_MB02_LENGTH 0xFFC02C50 /* Mailbox 2 Data Length Code Register */ +#define CAN_MB02_TIMESTAMP 0xFFC02C54 /* Mailbox 2 Time Stamp Value Register */ +#define CAN_MB02_ID0 0xFFC02C58 /* Mailbox 2 Identifier Low Register */ +#define CAN_MB02_ID1 0xFFC02C5C /* Mailbox 2 Identifier High Register */ + +#define CAN_MB03_DATA0 0xFFC02C60 /* Mailbox 3 Data Word 0 [15:0] Register */ +#define CAN_MB03_DATA1 0xFFC02C64 /* Mailbox 3 Data Word 1 [31:16] Register */ +#define CAN_MB03_DATA2 0xFFC02C68 /* Mailbox 3 Data Word 2 [47:32] Register */ +#define CAN_MB03_DATA3 0xFFC02C6C /* Mailbox 3 Data Word 3 [63:48] Register */ +#define CAN_MB03_LENGTH 0xFFC02C70 /* Mailbox 3 Data Length Code Register */ +#define CAN_MB03_TIMESTAMP 0xFFC02C74 /* Mailbox 3 Time Stamp Value Register */ +#define CAN_MB03_ID0 0xFFC02C78 /* Mailbox 3 Identifier Low Register */ +#define CAN_MB03_ID1 0xFFC02C7C /* Mailbox 3 Identifier High Register */ + +#define CAN_MB04_DATA0 0xFFC02C80 /* Mailbox 4 Data Word 0 [15:0] Register */ +#define CAN_MB04_DATA1 0xFFC02C84 /* Mailbox 4 Data Word 1 [31:16] Register */ +#define CAN_MB04_DATA2 0xFFC02C88 /* Mailbox 4 Data Word 2 [47:32] Register */ +#define CAN_MB04_DATA3 0xFFC02C8C /* Mailbox 4 Data Word 3 [63:48] Register */ +#define CAN_MB04_LENGTH 0xFFC02C90 /* Mailbox 4 Data Length Code Register */ +#define CAN_MB04_TIMESTAMP 0xFFC02C94 /* Mailbox 4 Time Stamp Value Register */ +#define CAN_MB04_ID0 0xFFC02C98 /* Mailbox 4 Identifier Low Register */ +#define CAN_MB04_ID1 0xFFC02C9C /* Mailbox 4 Identifier High Register */ + +#define CAN_MB05_DATA0 0xFFC02CA0 /* Mailbox 5 Data Word 0 [15:0] Register */ +#define CAN_MB05_DATA1 0xFFC02CA4 /* Mailbox 5 Data Word 1 [31:16] Register */ +#define CAN_MB05_DATA2 0xFFC02CA8 /* Mailbox 5 Data Word 2 [47:32] Register */ +#define CAN_MB05_DATA3 0xFFC02CAC /* Mailbox 5 Data Word 3 [63:48] Register */ +#define CAN_MB05_LENGTH 0xFFC02CB0 /* Mailbox 5 Data Length Code Register */ +#define CAN_MB05_TIMESTAMP 0xFFC02CB4 /* Mailbox 5 Time Stamp Value Register */ +#define CAN_MB05_ID0 0xFFC02CB8 /* Mailbox 5 Identifier Low Register */ +#define CAN_MB05_ID1 0xFFC02CBC /* Mailbox 5 Identifier High Register */ + +#define CAN_MB06_DATA0 0xFFC02CC0 /* Mailbox 6 Data Word 0 [15:0] Register */ +#define CAN_MB06_DATA1 0xFFC02CC4 /* Mailbox 6 Data Word 1 [31:16] Register */ +#define CAN_MB06_DATA2 0xFFC02CC8 /* Mailbox 6 Data Word 2 [47:32] Register */ +#define CAN_MB06_DATA3 0xFFC02CCC /* Mailbox 6 Data Word 3 [63:48] Register */ +#define CAN_MB06_LENGTH 0xFFC02CD0 /* Mailbox 6 Data Length Code Register */ +#define CAN_MB06_TIMESTAMP 0xFFC02CD4 /* Mailbox 6 Time Stamp Value Register */ +#define CAN_MB06_ID0 0xFFC02CD8 /* Mailbox 6 Identifier Low Register */ +#define CAN_MB06_ID1 0xFFC02CDC /* Mailbox 6 Identifier High Register */ + +#define CAN_MB07_DATA0 0xFFC02CE0 /* Mailbox 7 Data Word 0 [15:0] Register */ +#define CAN_MB07_DATA1 0xFFC02CE4 /* Mailbox 7 Data Word 1 [31:16] Register */ +#define CAN_MB07_DATA2 0xFFC02CE8 /* Mailbox 7 Data Word 2 [47:32] Register */ +#define CAN_MB07_DATA3 0xFFC02CEC /* Mailbox 7 Data Word 3 [63:48] Register */ +#define CAN_MB07_LENGTH 0xFFC02CF0 /* Mailbox 7 Data Length Code Register */ +#define CAN_MB07_TIMESTAMP 0xFFC02CF4 /* Mailbox 7 Time Stamp Value Register */ +#define CAN_MB07_ID0 0xFFC02CF8 /* Mailbox 7 Identifier Low Register */ +#define CAN_MB07_ID1 0xFFC02CFC /* Mailbox 7 Identifier High Register */ + +#define CAN_MB08_DATA0 0xFFC02D00 /* Mailbox 8 Data Word 0 [15:0] Register */ +#define CAN_MB08_DATA1 0xFFC02D04 /* Mailbox 8 Data Word 1 [31:16] Register */ +#define CAN_MB08_DATA2 0xFFC02D08 /* Mailbox 8 Data Word 2 [47:32] Register */ +#define CAN_MB08_DATA3 0xFFC02D0C /* Mailbox 8 Data Word 3 [63:48] Register */ +#define CAN_MB08_LENGTH 0xFFC02D10 /* Mailbox 8 Data Length Code Register */ +#define CAN_MB08_TIMESTAMP 0xFFC02D14 /* Mailbox 8 Time Stamp Value Register */ +#define CAN_MB08_ID0 0xFFC02D18 /* Mailbox 8 Identifier Low Register */ +#define CAN_MB08_ID1 0xFFC02D1C /* Mailbox 8 Identifier High Register */ + +#define CAN_MB09_DATA0 0xFFC02D20 /* Mailbox 9 Data Word 0 [15:0] Register */ +#define CAN_MB09_DATA1 0xFFC02D24 /* Mailbox 9 Data Word 1 [31:16] Register */ +#define CAN_MB09_DATA2 0xFFC02D28 /* Mailbox 9 Data Word 2 [47:32] Register */ +#define CAN_MB09_DATA3 0xFFC02D2C /* Mailbox 9 Data Word 3 [63:48] Register */ +#define CAN_MB09_LENGTH 0xFFC02D30 /* Mailbox 9 Data Length Code Register */ +#define CAN_MB09_TIMESTAMP 0xFFC02D34 /* Mailbox 9 Time Stamp Value Register */ +#define CAN_MB09_ID0 0xFFC02D38 /* Mailbox 9 Identifier Low Register */ +#define CAN_MB09_ID1 0xFFC02D3C /* Mailbox 9 Identifier High Register */ + +#define CAN_MB10_DATA0 0xFFC02D40 /* Mailbox 10 Data Word 0 [15:0] Register */ +#define CAN_MB10_DATA1 0xFFC02D44 /* Mailbox 10 Data Word 1 [31:16] Register */ +#define CAN_MB10_DATA2 0xFFC02D48 /* Mailbox 10 Data Word 2 [47:32] Register */ +#define CAN_MB10_DATA3 0xFFC02D4C /* Mailbox 10 Data Word 3 [63:48] Register */ +#define CAN_MB10_LENGTH 0xFFC02D50 /* Mailbox 10 Data Length Code Register */ +#define CAN_MB10_TIMESTAMP 0xFFC02D54 /* Mailbox 10 Time Stamp Value Register */ +#define CAN_MB10_ID0 0xFFC02D58 /* Mailbox 10 Identifier Low Register */ +#define CAN_MB10_ID1 0xFFC02D5C /* Mailbox 10 Identifier High Register */ + +#define CAN_MB11_DATA0 0xFFC02D60 /* Mailbox 11 Data Word 0 [15:0] Register */ +#define CAN_MB11_DATA1 0xFFC02D64 /* Mailbox 11 Data Word 1 [31:16] Register */ +#define CAN_MB11_DATA2 0xFFC02D68 /* Mailbox 11 Data Word 2 [47:32] Register */ +#define CAN_MB11_DATA3 0xFFC02D6C /* Mailbox 11 Data Word 3 [63:48] Register */ +#define CAN_MB11_LENGTH 0xFFC02D70 /* Mailbox 11 Data Length Code Register */ +#define CAN_MB11_TIMESTAMP 0xFFC02D74 /* Mailbox 11 Time Stamp Value Register */ +#define CAN_MB11_ID0 0xFFC02D78 /* Mailbox 11 Identifier Low Register */ +#define CAN_MB11_ID1 0xFFC02D7C /* Mailbox 11 Identifier High Register */ + +#define CAN_MB12_DATA0 0xFFC02D80 /* Mailbox 12 Data Word 0 [15:0] Register */ +#define CAN_MB12_DATA1 0xFFC02D84 /* Mailbox 12 Data Word 1 [31:16] Register */ +#define CAN_MB12_DATA2 0xFFC02D88 /* Mailbox 12 Data Word 2 [47:32] Register */ +#define CAN_MB12_DATA3 0xFFC02D8C /* Mailbox 12 Data Word 3 [63:48] Register */ +#define CAN_MB12_LENGTH 0xFFC02D90 /* Mailbox 12 Data Length Code Register */ +#define CAN_MB12_TIMESTAMP 0xFFC02D94 /* Mailbox 12 Time Stamp Value Register */ +#define CAN_MB12_ID0 0xFFC02D98 /* Mailbox 12 Identifier Low Register */ +#define CAN_MB12_ID1 0xFFC02D9C /* Mailbox 12 Identifier High Register */ + +#define CAN_MB13_DATA0 0xFFC02DA0 /* Mailbox 13 Data Word 0 [15:0] Register */ +#define CAN_MB13_DATA1 0xFFC02DA4 /* Mailbox 13 Data Word 1 [31:16] Register */ +#define CAN_MB13_DATA2 0xFFC02DA8 /* Mailbox 13 Data Word 2 [47:32] Register */ +#define CAN_MB13_DATA3 0xFFC02DAC /* Mailbox 13 Data Word 3 [63:48] Register */ +#define CAN_MB13_LENGTH 0xFFC02DB0 /* Mailbox 13 Data Length Code Register */ +#define CAN_MB13_TIMESTAMP 0xFFC02DB4 /* Mailbox 13 Time Stamp Value Register */ +#define CAN_MB13_ID0 0xFFC02DB8 /* Mailbox 13 Identifier Low Register */ +#define CAN_MB13_ID1 0xFFC02DBC /* Mailbox 13 Identifier High Register */ + +#define CAN_MB14_DATA0 0xFFC02DC0 /* Mailbox 14 Data Word 0 [15:0] Register */ +#define CAN_MB14_DATA1 0xFFC02DC4 /* Mailbox 14 Data Word 1 [31:16] Register */ +#define CAN_MB14_DATA2 0xFFC02DC8 /* Mailbox 14 Data Word 2 [47:32] Register */ +#define CAN_MB14_DATA3 0xFFC02DCC /* Mailbox 14 Data Word 3 [63:48] Register */ +#define CAN_MB14_LENGTH 0xFFC02DD0 /* Mailbox 14 Data Length Code Register */ +#define CAN_MB14_TIMESTAMP 0xFFC02DD4 /* Mailbox 14 Time Stamp Value Register */ +#define CAN_MB14_ID0 0xFFC02DD8 /* Mailbox 14 Identifier Low Register */ +#define CAN_MB14_ID1 0xFFC02DDC /* Mailbox 14 Identifier High Register */ + +#define CAN_MB15_DATA0 0xFFC02DE0 /* Mailbox 15 Data Word 0 [15:0] Register */ +#define CAN_MB15_DATA1 0xFFC02DE4 /* Mailbox 15 Data Word 1 [31:16] Register */ +#define CAN_MB15_DATA2 0xFFC02DE8 /* Mailbox 15 Data Word 2 [47:32] Register */ +#define CAN_MB15_DATA3 0xFFC02DEC /* Mailbox 15 Data Word 3 [63:48] Register */ +#define CAN_MB15_LENGTH 0xFFC02DF0 /* Mailbox 15 Data Length Code Register */ +#define CAN_MB15_TIMESTAMP 0xFFC02DF4 /* Mailbox 15 Time Stamp Value Register */ +#define CAN_MB15_ID0 0xFFC02DF8 /* Mailbox 15 Identifier Low Register */ +#define CAN_MB15_ID1 0xFFC02DFC /* Mailbox 15 Identifier High Register */ + +#define CAN_MB16_DATA0 0xFFC02E00 /* Mailbox 16 Data Word 0 [15:0] Register */ +#define CAN_MB16_DATA1 0xFFC02E04 /* Mailbox 16 Data Word 1 [31:16] Register */ +#define CAN_MB16_DATA2 0xFFC02E08 /* Mailbox 16 Data Word 2 [47:32] Register */ +#define CAN_MB16_DATA3 0xFFC02E0C /* Mailbox 16 Data Word 3 [63:48] Register */ +#define CAN_MB16_LENGTH 0xFFC02E10 /* Mailbox 16 Data Length Code Register */ +#define CAN_MB16_TIMESTAMP 0xFFC02E14 /* Mailbox 16 Time Stamp Value Register */ +#define CAN_MB16_ID0 0xFFC02E18 /* Mailbox 16 Identifier Low Register */ +#define CAN_MB16_ID1 0xFFC02E1C /* Mailbox 16 Identifier High Register */ + +#define CAN_MB17_DATA0 0xFFC02E20 /* Mailbox 17 Data Word 0 [15:0] Register */ +#define CAN_MB17_DATA1 0xFFC02E24 /* Mailbox 17 Data Word 1 [31:16] Register */ +#define CAN_MB17_DATA2 0xFFC02E28 /* Mailbox 17 Data Word 2 [47:32] Register */ +#define CAN_MB17_DATA3 0xFFC02E2C /* Mailbox 17 Data Word 3 [63:48] Register */ +#define CAN_MB17_LENGTH 0xFFC02E30 /* Mailbox 17 Data Length Code Register */ +#define CAN_MB17_TIMESTAMP 0xFFC02E34 /* Mailbox 17 Time Stamp Value Register */ +#define CAN_MB17_ID0 0xFFC02E38 /* Mailbox 17 Identifier Low Register */ +#define CAN_MB17_ID1 0xFFC02E3C /* Mailbox 17 Identifier High Register */ + +#define CAN_MB18_DATA0 0xFFC02E40 /* Mailbox 18 Data Word 0 [15:0] Register */ +#define CAN_MB18_DATA1 0xFFC02E44 /* Mailbox 18 Data Word 1 [31:16] Register */ +#define CAN_MB18_DATA2 0xFFC02E48 /* Mailbox 18 Data Word 2 [47:32] Register */ +#define CAN_MB18_DATA3 0xFFC02E4C /* Mailbox 18 Data Word 3 [63:48] Register */ +#define CAN_MB18_LENGTH 0xFFC02E50 /* Mailbox 18 Data Length Code Register */ +#define CAN_MB18_TIMESTAMP 0xFFC02E54 /* Mailbox 18 Time Stamp Value Register */ +#define CAN_MB18_ID0 0xFFC02E58 /* Mailbox 18 Identifier Low Register */ +#define CAN_MB18_ID1 0xFFC02E5C /* Mailbox 18 Identifier High Register */ + +#define CAN_MB19_DATA0 0xFFC02E60 /* Mailbox 19 Data Word 0 [15:0] Register */ +#define CAN_MB19_DATA1 0xFFC02E64 /* Mailbox 19 Data Word 1 [31:16] Register */ +#define CAN_MB19_DATA2 0xFFC02E68 /* Mailbox 19 Data Word 2 [47:32] Register */ +#define CAN_MB19_DATA3 0xFFC02E6C /* Mailbox 19 Data Word 3 [63:48] Register */ +#define CAN_MB19_LENGTH 0xFFC02E70 /* Mailbox 19 Data Length Code Register */ +#define CAN_MB19_TIMESTAMP 0xFFC02E74 /* Mailbox 19 Time Stamp Value Register */ +#define CAN_MB19_ID0 0xFFC02E78 /* Mailbox 19 Identifier Low Register */ +#define CAN_MB19_ID1 0xFFC02E7C /* Mailbox 19 Identifier High Register */ + +#define CAN_MB20_DATA0 0xFFC02E80 /* Mailbox 20 Data Word 0 [15:0] Register */ +#define CAN_MB20_DATA1 0xFFC02E84 /* Mailbox 20 Data Word 1 [31:16] Register */ +#define CAN_MB20_DATA2 0xFFC02E88 /* Mailbox 20 Data Word 2 [47:32] Register */ +#define CAN_MB20_DATA3 0xFFC02E8C /* Mailbox 20 Data Word 3 [63:48] Register */ +#define CAN_MB20_LENGTH 0xFFC02E90 /* Mailbox 20 Data Length Code Register */ +#define CAN_MB20_TIMESTAMP 0xFFC02E94 /* Mailbox 20 Time Stamp Value Register */ +#define CAN_MB20_ID0 0xFFC02E98 /* Mailbox 20 Identifier Low Register */ +#define CAN_MB20_ID1 0xFFC02E9C /* Mailbox 20 Identifier High Register */ + +#define CAN_MB21_DATA0 0xFFC02EA0 /* Mailbox 21 Data Word 0 [15:0] Register */ +#define CAN_MB21_DATA1 0xFFC02EA4 /* Mailbox 21 Data Word 1 [31:16] Register */ +#define CAN_MB21_DATA2 0xFFC02EA8 /* Mailbox 21 Data Word 2 [47:32] Register */ +#define CAN_MB21_DATA3 0xFFC02EAC /* Mailbox 21 Data Word 3 [63:48] Register */ +#define CAN_MB21_LENGTH 0xFFC02EB0 /* Mailbox 21 Data Length Code Register */ +#define CAN_MB21_TIMESTAMP 0xFFC02EB4 /* Mailbox 21 Time Stamp Value Register */ +#define CAN_MB21_ID0 0xFFC02EB8 /* Mailbox 21 Identifier Low Register */ +#define CAN_MB21_ID1 0xFFC02EBC /* Mailbox 21 Identifier High Register */ + +#define CAN_MB22_DATA0 0xFFC02EC0 /* Mailbox 22 Data Word 0 [15:0] Register */ +#define CAN_MB22_DATA1 0xFFC02EC4 /* Mailbox 22 Data Word 1 [31:16] Register */ +#define CAN_MB22_DATA2 0xFFC02EC8 /* Mailbox 22 Data Word 2 [47:32] Register */ +#define CAN_MB22_DATA3 0xFFC02ECC /* Mailbox 22 Data Word 3 [63:48] Register */ +#define CAN_MB22_LENGTH 0xFFC02ED0 /* Mailbox 22 Data Length Code Register */ +#define CAN_MB22_TIMESTAMP 0xFFC02ED4 /* Mailbox 22 Time Stamp Value Register */ +#define CAN_MB22_ID0 0xFFC02ED8 /* Mailbox 22 Identifier Low Register */ +#define CAN_MB22_ID1 0xFFC02EDC /* Mailbox 22 Identifier High Register */ + +#define CAN_MB23_DATA0 0xFFC02EE0 /* Mailbox 23 Data Word 0 [15:0] Register */ +#define CAN_MB23_DATA1 0xFFC02EE4 /* Mailbox 23 Data Word 1 [31:16] Register */ +#define CAN_MB23_DATA2 0xFFC02EE8 /* Mailbox 23 Data Word 2 [47:32] Register */ +#define CAN_MB23_DATA3 0xFFC02EEC /* Mailbox 23 Data Word 3 [63:48] Register */ +#define CAN_MB23_LENGTH 0xFFC02EF0 /* Mailbox 23 Data Length Code Register */ +#define CAN_MB23_TIMESTAMP 0xFFC02EF4 /* Mailbox 23 Time Stamp Value Register */ +#define CAN_MB23_ID0 0xFFC02EF8 /* Mailbox 23 Identifier Low Register */ +#define CAN_MB23_ID1 0xFFC02EFC /* Mailbox 23 Identifier High Register */ + +#define CAN_MB24_DATA0 0xFFC02F00 /* Mailbox 24 Data Word 0 [15:0] Register */ +#define CAN_MB24_DATA1 0xFFC02F04 /* Mailbox 24 Data Word 1 [31:16] Register */ +#define CAN_MB24_DATA2 0xFFC02F08 /* Mailbox 24 Data Word 2 [47:32] Register */ +#define CAN_MB24_DATA3 0xFFC02F0C /* Mailbox 24 Data Word 3 [63:48] Register */ +#define CAN_MB24_LENGTH 0xFFC02F10 /* Mailbox 24 Data Length Code Register */ +#define CAN_MB24_TIMESTAMP 0xFFC02F14 /* Mailbox 24 Time Stamp Value Register */ +#define CAN_MB24_ID0 0xFFC02F18 /* Mailbox 24 Identifier Low Register */ +#define CAN_MB24_ID1 0xFFC02F1C /* Mailbox 24 Identifier High Register */ + +#define CAN_MB25_DATA0 0xFFC02F20 /* Mailbox 25 Data Word 0 [15:0] Register */ +#define CAN_MB25_DATA1 0xFFC02F24 /* Mailbox 25 Data Word 1 [31:16] Register */ +#define CAN_MB25_DATA2 0xFFC02F28 /* Mailbox 25 Data Word 2 [47:32] Register */ +#define CAN_MB25_DATA3 0xFFC02F2C /* Mailbox 25 Data Word 3 [63:48] Register */ +#define CAN_MB25_LENGTH 0xFFC02F30 /* Mailbox 25 Data Length Code Register */ +#define CAN_MB25_TIMESTAMP 0xFFC02F34 /* Mailbox 25 Time Stamp Value Register */ +#define CAN_MB25_ID0 0xFFC02F38 /* Mailbox 25 Identifier Low Register */ +#define CAN_MB25_ID1 0xFFC02F3C /* Mailbox 25 Identifier High Register */ + +#define CAN_MB26_DATA0 0xFFC02F40 /* Mailbox 26 Data Word 0 [15:0] Register */ +#define CAN_MB26_DATA1 0xFFC02F44 /* Mailbox 26 Data Word 1 [31:16] Register */ +#define CAN_MB26_DATA2 0xFFC02F48 /* Mailbox 26 Data Word 2 [47:32] Register */ +#define CAN_MB26_DATA3 0xFFC02F4C /* Mailbox 26 Data Word 3 [63:48] Register */ +#define CAN_MB26_LENGTH 0xFFC02F50 /* Mailbox 26 Data Length Code Register */ +#define CAN_MB26_TIMESTAMP 0xFFC02F54 /* Mailbox 26 Time Stamp Value Register */ +#define CAN_MB26_ID0 0xFFC02F58 /* Mailbox 26 Identifier Low Register */ +#define CAN_MB26_ID1 0xFFC02F5C /* Mailbox 26 Identifier High Register */ + +#define CAN_MB27_DATA0 0xFFC02F60 /* Mailbox 27 Data Word 0 [15:0] Register */ +#define CAN_MB27_DATA1 0xFFC02F64 /* Mailbox 27 Data Word 1 [31:16] Register */ +#define CAN_MB27_DATA2 0xFFC02F68 /* Mailbox 27 Data Word 2 [47:32] Register */ +#define CAN_MB27_DATA3 0xFFC02F6C /* Mailbox 27 Data Word 3 [63:48] Register */ +#define CAN_MB27_LENGTH 0xFFC02F70 /* Mailbox 27 Data Length Code Register */ +#define CAN_MB27_TIMESTAMP 0xFFC02F74 /* Mailbox 27 Time Stamp Value Register */ +#define CAN_MB27_ID0 0xFFC02F78 /* Mailbox 27 Identifier Low Register */ +#define CAN_MB27_ID1 0xFFC02F7C /* Mailbox 27 Identifier High Register */ + +#define CAN_MB28_DATA0 0xFFC02F80 /* Mailbox 28 Data Word 0 [15:0] Register */ +#define CAN_MB28_DATA1 0xFFC02F84 /* Mailbox 28 Data Word 1 [31:16] Register */ +#define CAN_MB28_DATA2 0xFFC02F88 /* Mailbox 28 Data Word 2 [47:32] Register */ +#define CAN_MB28_DATA3 0xFFC02F8C /* Mailbox 28 Data Word 3 [63:48] Register */ +#define CAN_MB28_LENGTH 0xFFC02F90 /* Mailbox 28 Data Length Code Register */ +#define CAN_MB28_TIMESTAMP 0xFFC02F94 /* Mailbox 28 Time Stamp Value Register */ +#define CAN_MB28_ID0 0xFFC02F98 /* Mailbox 28 Identifier Low Register */ +#define CAN_MB28_ID1 0xFFC02F9C /* Mailbox 28 Identifier High Register */ + +#define CAN_MB29_DATA0 0xFFC02FA0 /* Mailbox 29 Data Word 0 [15:0] Register */ +#define CAN_MB29_DATA1 0xFFC02FA4 /* Mailbox 29 Data Word 1 [31:16] Register */ +#define CAN_MB29_DATA2 0xFFC02FA8 /* Mailbox 29 Data Word 2 [47:32] Register */ +#define CAN_MB29_DATA3 0xFFC02FAC /* Mailbox 29 Data Word 3 [63:48] Register */ +#define CAN_MB29_LENGTH 0xFFC02FB0 /* Mailbox 29 Data Length Code Register */ +#define CAN_MB29_TIMESTAMP 0xFFC02FB4 /* Mailbox 29 Time Stamp Value Register */ +#define CAN_MB29_ID0 0xFFC02FB8 /* Mailbox 29 Identifier Low Register */ +#define CAN_MB29_ID1 0xFFC02FBC /* Mailbox 29 Identifier High Register */ + +#define CAN_MB30_DATA0 0xFFC02FC0 /* Mailbox 30 Data Word 0 [15:0] Register */ +#define CAN_MB30_DATA1 0xFFC02FC4 /* Mailbox 30 Data Word 1 [31:16] Register */ +#define CAN_MB30_DATA2 0xFFC02FC8 /* Mailbox 30 Data Word 2 [47:32] Register */ +#define CAN_MB30_DATA3 0xFFC02FCC /* Mailbox 30 Data Word 3 [63:48] Register */ +#define CAN_MB30_LENGTH 0xFFC02FD0 /* Mailbox 30 Data Length Code Register */ +#define CAN_MB30_TIMESTAMP 0xFFC02FD4 /* Mailbox 30 Time Stamp Value Register */ +#define CAN_MB30_ID0 0xFFC02FD8 /* Mailbox 30 Identifier Low Register */ +#define CAN_MB30_ID1 0xFFC02FDC /* Mailbox 30 Identifier High Register */ + +#define CAN_MB31_DATA0 0xFFC02FE0 /* Mailbox 31 Data Word 0 [15:0] Register */ +#define CAN_MB31_DATA1 0xFFC02FE4 /* Mailbox 31 Data Word 1 [31:16] Register */ +#define CAN_MB31_DATA2 0xFFC02FE8 /* Mailbox 31 Data Word 2 [47:32] Register */ +#define CAN_MB31_DATA3 0xFFC02FEC /* Mailbox 31 Data Word 3 [63:48] Register */ +#define CAN_MB31_LENGTH 0xFFC02FF0 /* Mailbox 31 Data Length Code Register */ +#define CAN_MB31_TIMESTAMP 0xFFC02FF4 /* Mailbox 31 Time Stamp Value Register */ +#define CAN_MB31_ID0 0xFFC02FF8 /* Mailbox 31 Identifier Low Register */ +#define CAN_MB31_ID1 0xFFC02FFC /* Mailbox 31 Identifier High Register */ + +/* CAN Mailbox Area Macros */ +#define CAN_MB_ID1(x) (CAN_MB00_ID1+((x)*0x20)) +#define CAN_MB_ID0(x) (CAN_MB00_ID0+((x)*0x20)) +#define CAN_MB_TIMESTAMP(x) (CAN_MB00_TIMESTAMP+((x)*0x20)) +#define CAN_MB_LENGTH(x) (CAN_MB00_LENGTH+((x)*0x20)) +#define CAN_MB_DATA3(x) (CAN_MB00_DATA3+((x)*0x20)) +#define CAN_MB_DATA2(x) (CAN_MB00_DATA2+((x)*0x20)) +#define CAN_MB_DATA1(x) (CAN_MB00_DATA1+((x)*0x20)) +#define CAN_MB_DATA0(x) (CAN_MB00_DATA0+((x)*0x20)) + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ +#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ +#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ +#define PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ + +#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ + +/* + * System MMR Register Bits And Macros + * + * Disclaimer: All macros are intended to make C and Assembly code more readable. + * Use these macros carefully, as any that do left shifts for field + * depositing will result in the lower order bits being destroyed. Any + * macro that shifts left to properly position the bit-field should be + * used as part of an OR to initialize a register and NOT as a dynamic + * modifier UNLESS the lower order bits are saved and ORed back in when + * the macro is used. + */ +/* + * PLL AND RESET MASKS + * PLL_CTL Masks + */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* PLL Not Powered */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Enter Deep Sleep Mode */ +#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#define BYPASS 0x0100 /* Bypass the PLL */ +#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ +/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ + +#define CCLK_DIV1 CSEL_DIV1 +#define CCLK_DIV2 CSEL_DIV2 +#define CCLK_DIV4 CSEL_DIV4 +#define CCLK_DIV8 CSEL_DIV8 +/* PLL_DIV Macros */ +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ + +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5 */ +#define GAIN_10 0x0004 /* GAIN = 10 */ +#define GAIN_20 0x0008 /* GAIN = 20 */ +#define GAIN_50 0x000C /* GAIN = 50 */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ +#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ +#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ +#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ +#define CKELOW 0x8000 /* Enable Drive CKE Low During Reset */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* SWRST Masks */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ + +/* + * SYSTEM INTERRUPT CONTROLLER MASKS + */ +/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */ +#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */ +#define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */ +#define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */ +#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */ +#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */ +#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */ +#define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */ +#define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */ + +#define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */ +#define IRQ_TWI 0x00000200 /* TWI Interrupt */ +#define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */ +#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */ +#define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */ +#define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */ +#define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */ +#define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */ + +#define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */ +#define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */ +#define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */ +#define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */ +#define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */ +#define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */ +#define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */ +#define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */ +#define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */ +#define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */ + +#define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */ +#define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */ +#define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */ +#define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */ +#define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */ +#define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */ +#define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */ +#define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */ +#define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */ +#define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */ +#define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */ + +/* SIC_IAR0 Macros */ +#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Macros */ +#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Macros */ +#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IAR3 Macros */ +#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */ +#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */ +#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */ +#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */ +#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */ +#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */ +#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */ +#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */ + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ + +/* ********* WATCHDOG TIMER MASKS ******************** */ + +/* Watchdog Timer WDOG_CTL Register Masks */ + +#define WDEV(x) ((x<<1) & 0x0006) /* event generated on roll over */ +#define WDEV_RESET 0x0000 /* generate reset event on roll over */ +#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ +#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ +#define WDEV_NONE 0x0006 /* no event on roll over */ +#define WDEN 0x0FF0 /* enable watchdog */ +#define WDDIS 0x0AD0 /* disable watchdog */ +#define WDRO 0x8000 /* watchdog rolled over latch */ + +/* depreciated WDOG_CTL Register Masks for legacy code */ + +#define ICTL WDEV +#define ENABLE_RESET WDEV_RESET +#define WDOG_RESET WDEV_RESET +#define ENABLE_NMI WDEV_NMI +#define WDOG_NMI WDEV_NMI +#define ENABLE_GPI WDEV_GPI +#define WDOG_GPI WDEV_GPI +#define DISABLE_EVT WDEV_NONE +#define WDOG_NONE WDEV_NONE + +#define TMR_EN WDEN +#define TMR_DIS WDDIS +#define TRO WDRO +#define ICTL_P0 0x01 +#define ICTL_P1 0x02 +#define TRO_P 0x0F + +/* + * REAL TIME CLOCK MASKS + */ +/* RTC_STAT and RTC_ALARM Masks */ +#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */ +#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */ +#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */ +#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */ + +/* + * RTC_ALARM Macro + * z=day y=hr x=min w=sec + */ +#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F)) + +/* RTC_ICTL and RTC_ISTAT Masks */ +#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */ +#define ALARM 0x0002 /* Alarm Interrupt Enable */ +#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */ +#define MINUTE 0x0008 /* Minutes Interrupt Enable */ +#define HOUR 0x0010 /* Hours Interrupt Enable */ +#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */ +#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ +#define WRITE_PENDING 0x4000 /* Write Pending Status */ +#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */ + +/* RTC_FAST / RTC_PREN Mask */ +#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */ + +/* + * UART CONTROLLER MASKS + */ +/* UARTx_LCR Masks */ +#define WLS(x) ((((x)&0x3)-5) & 0x03) /* Word Length Select */ +#define STB 0x04 /* Stop Bits */ +#define PEN 0x08 /* Parity Enable */ +#define EPS 0x10 /* Even Parity Select */ +#define STP 0x20 /* Stick Parity */ +#define SB 0x40 /* Set Break */ +#define DLAB 0x80 /* Divisor Latch Access */ + +/* UARTx_MCR Mask */ +#define LOOP 0x10 /* Loopback Mode Enable */ + +/* UARTx_LSR Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x40 /* TSR and UART_THR Empty */ + +/* UARTx_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ + +/* UARTx_IIR Masks */ +#define NINT 0x01 /* Pending Interrupt */ +#define STATUS 0x06 /* Highest Priority Pending Interrupt */ + +/* UARTx_GCTL Masks */ +#define UCEN 0x01 /* Enable UARTx Clocks */ +#define IREN 0x02 /* Enable IrDA Mode */ +#define TPOLC 0x04 /* IrDA TX Polarity Change */ +#define RPOLC 0x08 /* IrDA RX Polarity Change */ +#define FPE 0x10 /* Force Parity Error On Transmit */ +#define FFE 0x20 /* Force Framing Error On Transmit */ + +/* + * SERIAL PERIPHERAL INTERFACE (SPI) MASKS + */ +/* SPI_CTL Masks */ +#define TIMOD 0x0003 /* Transfer Initiate Mode */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ +#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ +#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ +#define PSSE 0x0010 /* Slave-Select Input Enable */ +#define EMISO 0x0020 /* Enable MISO As Output */ +#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ +#define LSBF 0x0200 /* LSB First */ +#define CPHA 0x0400 /* Clock Phase */ +#define CPOL 0x0800 /* Clock Polarity */ +#define MSTR 0x1000 /* Master/Slave* */ +#define WOM 0x2000 /* Write Open Drain Master */ +#define SPE 0x4000 /* SPI Enable */ + +/* SPI_FLG Masks */ +#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ +#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ +#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ +#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ +#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ +#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ +#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ +#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ + +/* SPI_STAT Masks */ +#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ +#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ +#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ +#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ +#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ +#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ +#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ + +/* + * GENERAL PURPOSE TIMER MASKS + */ +/* TIMER_ENABLE Masks */ +#define TIMEN0 0x0001 /* Enable Timer 0 */ +#define TIMEN1 0x0002 /* Enable Timer 1 */ +#define TIMEN2 0x0004 /* Enable Timer 2 */ +#define TIMEN3 0x0008 /* Enable Timer 3 */ +#define TIMEN4 0x0010 /* Enable Timer 4 */ +#define TIMEN5 0x0020 /* Enable Timer 5 */ +#define TIMEN6 0x0040 /* Enable Timer 6 */ +#define TIMEN7 0x0080 /* Enable Timer 7 */ + +/* TIMER_DISABLE Masks */ +#define TIMDIS0 TIMEN0 /* Disable Timer 0 */ +#define TIMDIS1 TIMEN1 /* Disable Timer 1 */ +#define TIMDIS2 TIMEN2 /* Disable Timer 2 */ +#define TIMDIS3 TIMEN3 /* Disable Timer 3 */ +#define TIMDIS4 TIMEN4 /* Disable Timer 4 */ +#define TIMDIS5 TIMEN5 /* Disable Timer 5 */ +#define TIMDIS6 TIMEN6 /* Disable Timer 6 */ +#define TIMDIS7 TIMEN7 /* Disable Timer 7 */ + +/* TIMER_STATUS Masks */ +#define TIMIL0 0x00000001 /* Timer 0 Interrupt */ +#define TIMIL1 0x00000002 /* Timer 1 Interrupt */ +#define TIMIL2 0x00000004 /* Timer 2 Interrupt */ +#define TIMIL3 0x00000008 /* Timer 3 Interrupt */ +#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */ +#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */ +#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ +#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ +#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ +#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */ +#define TIMIL4 0x00010000 /* Timer 4 Interrupt */ +#define TIMIL5 0x00020000 /* Timer 5 Interrupt */ +#define TIMIL6 0x00040000 /* Timer 6 Interrupt */ +#define TIMIL7 0x00080000 /* Timer 7 Interrupt */ +#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */ +#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */ +#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */ +#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */ +#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ +#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ +#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ +#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR3 TOVF_ERR3 +#define TOVL_ERR4 TOVF_ERR4 +#define TOVL_ERR5 TOVF_ERR5 +#define TOVL_ERR6 TOVF_ERR6 +#define TOVL_ERR7 TOVF_ERR7 + +/* TIMERx_CONFIG Masks */ +#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ +#define WDTH_CAP 0x0002 /* Width Capture Input Mode */ +#define EXT_CLK 0x0003 /* External Clock Mode */ +#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */ +#define PERIOD_CNT 0x0008 /* Period Count */ +#define IRQ_ENA 0x0010 /* Interrupt Request Enable */ +#define TIN_SEL 0x0020 /* Timer Input Select */ +#define OUT_DIS 0x0040 /* Output Pad Disable */ +#define CLK_SEL 0x0080 /* Timer Clock Select */ +#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */ +#define EMU_RUN 0x0200 /* Emulation Behavior Select */ +#define ERR_TYP 0xC000 /* Error Type */ + +/* + * GPIO PORTS F, G, H MASKS + * General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks + */ +/* Port F Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* Port G Masks */ +#define PG0 0x0001 +#define PG1 0x0002 +#define PG2 0x0004 +#define PG3 0x0008 +#define PG4 0x0010 +#define PG5 0x0020 +#define PG6 0x0040 +#define PG7 0x0080 +#define PG8 0x0100 +#define PG9 0x0200 +#define PG10 0x0400 +#define PG11 0x0800 +#define PG12 0x1000 +#define PG13 0x2000 +#define PG14 0x4000 +#define PG15 0x8000 + +/* Port H Masks */ +#define PH0 0x0001 +#define PH1 0x0002 +#define PH2 0x0004 +#define PH3 0x0008 +#define PH4 0x0010 +#define PH5 0x0020 +#define PH6 0x0040 +#define PH7 0x0080 +#define PH8 0x0100 +#define PH9 0x0200 +#define PH10 0x0400 +#define PH11 0x0800 +#define PH12 0x1000 +#define PH13 0x2000 +#define PH14 0x4000 +#define PH15 0x8000 + +/* + * SERIAL PORT MASKS + */ +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* Transmit Enable */ +#define ITCLK 0x0002 /* Internal Transmit Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* Transmit Bit Order */ +#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */ +#define TFSR 0x0400 /* Transmit Frame Sync Required Select */ +#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */ +#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ +#define LATFS 0x2000 /* Late Transmit Frame Sync Select */ +#define TCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks and Macro */ +#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* Receive Enable */ +#define IRCLK 0x0002 /* Internal Receive Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define RLSBIT 0x0010 /* Receive Bit Order */ +#define IRFS 0x0200 /* Internal Receive Frame Sync Select */ +#define RFSR 0x0400 /* Receive Frame Sync Required Select */ +#define LRFS 0x1000 /* Low Receive Frame Sync Select */ +#define LARFS 0x2000 /* Late Receive Frame Sync Select */ +#define RCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* Receive FIFO Not Empty Status */ +#define RUVF 0x0002 /* Sticky Receive Underflow Status */ +#define ROVF 0x0004 /* Sticky Receive Overflow Status */ +#define TXF 0x0008 /* Transmit FIFO Full Status */ +#define TUVF 0x0010 /* Sticky Transmit Underflow Status */ +#define TOVF 0x0020 /* Sticky Transmit Overflow Status */ +#define TXHRE 0x0040 /* Transmit Hold Register Empty */ + +/* SPORTx_MCMC1 Macros */ +#define WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ + +/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ + +/* SPORTx_MCMC2 Masks */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ + +/* + * ASYNCHRONOUS MEMORY CONTROLLER MASKS + */ +/* EBIU_AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x0000 /* All Banks Disabled */ +#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ + +/* EBIU_AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */ +#define B0RDYPOL 0x00000002 /* B0 RDY Active High */ +#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */ +#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */ +#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */ +#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */ +#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */ + +#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */ +#define B1RDYPOL 0x00020000 /* B1 RDY Active High */ +#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */ +#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */ +#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */ +#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */ +#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */ + +/* EBIU_AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */ +#define B2RDYPOL 0x00000002 /* B2 RDY Active High */ +#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */ +#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */ +#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */ +#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */ +#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */ + +#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */ +#define B3RDYPOL 0x00020000 /* B3 RDY Active High */ +#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */ +#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */ +#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */ +#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */ +#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */ + +/* + * SDRAM CONTROLLER MASKS + */ +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SDRAM Signals */ +#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */ +#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */ +#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */ +#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */ +#define EBUFE 0x02000000 /* Enable External Buffering Timing */ +#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */ +#define EMREN 0x10000000 /* Extended Mode Register Enable */ +#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */ +#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x0001 /* Enable SDRAM External Bank */ +#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */ +#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */ +#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */ +#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */ +#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */ +#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */ +#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */ +#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x0001 /* SDRAM Controller Idle */ +#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */ +#define SDPUA 0x0004 /* SDRAM Power-Up Active */ +#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */ +#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */ +#define BGSTAT 0x0020 /* Bus Grant Status */ + +/* + * DMA CONTROLLER MASKS + */ +/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x0001 /* DMA Channel Enable */ +#define WNR 0x0002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ +#define RESTART 0x0020 /* DMA Buffer Clear */ +#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ +#define DI_EN 0x0080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define FLOW_STOP 0x0000 /* Stop Mode */ +#define FLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define FLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define FLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define FLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ +#define PMAP 0xF000 /* Peripheral Mapped To This Channel */ +#define PMAP_PPI 0x0000 /* PPI Port DMA */ +#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */ +#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */ +#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */ +#define PMAP_SPI 0x7000 /* SPI Port DMA */ +#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */ +#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */ +#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ +#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ +#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ +#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ + +/* + * PARALLEL PERIPHERAL INTERFACE (PPI) MASKS + */ +/* PPI_CONTROL Masks */ +#define PORT_EN 0x0001 /* PPI Port Enable */ +#define PORT_DIR 0x0002 /* PPI Port Direction */ +#define XFR_TYPE 0x000C /* PPI Transfer Type */ +#define PORT_CFG 0x0030 /* PPI Port Configuration */ +#define FLD_SEL 0x0040 /* PPI Active Field Select */ +#define PACK_EN 0x0080 /* PPI Packing Mode */ +#define DMA32 0x0100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x0200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ +#define DLEN_8 0x0000 /* Data Length = 8 Bits */ +#define DLEN_10 0x0800 /* Data Length = 10 Bits */ +#define DLEN_11 0x1000 /* Data Length = 11 Bits */ +#define DLEN_12 0x1800 /* Data Length = 12 Bits */ +#define DLEN_13 0x2000 /* Data Length = 13 Bits */ +#define DLEN_14 0x2800 /* Data Length = 14 Bits */ +#define DLEN_15 0x3000 /* Data Length = 15 Bits */ +#define DLEN_16 0x3800 /* Data Length = 16 Bits */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ + +/* PPI_STATUS Masks */ +#define FLD 0x0400 /* Field Indicator */ +#define FT_ERR 0x0800 /* Frame Track Error */ +#define OVR 0x1000 /* FIFO Overflow Error */ +#define UNDR 0x2000 /* FIFO Underrun Error */ +#define ERR_DET 0x4000 /* Error Detected Indicator */ +#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ + +/* + * TWO-WIRE INTERFACE (TWI) MASKS + */ +/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ +#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ + +/* TWI_PRESCALE Masks */ +#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ +#define TWI_ENA 0x0080 /* TWI Enable */ +#define SCCB 0x0200 /* SCCB Compatibility Enable */ + +/* TWI_SLAVE_CTRL Masks */ +#define SEN 0x0001 /* Slave Enable */ +#define SADD_LEN 0x0002 /* Slave Address Length */ +#define STDVAL 0x0004 /* Slave Transmit Data Valid */ +#define TSC_NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ +#define GEN 0x0010 /* General Call Adrress Matching Enabled */ + +/* TWI_SLAVE_STAT Masks */ +#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ +#define GCALL 0x0002 /* General Call Indicator */ + +/* TWI_MASTER_CTRL Masks */ +#define MEN 0x0001 /* Master Mode Enable */ +#define MADD_LEN 0x0002 /* Master Address Length */ +#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ +#define FAST 0x0008 /* Use Fast Mode Timing Specs */ +#define STOP 0x0010 /* Issue Stop Condition */ +#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ +#define DCNT 0x3FC0 /* Data Bytes To Transfer */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* TWI_MASTER_STAT Masks */ +#define MPROG 0x0001 /* Master Transfer In Progress */ +#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ +#define ANAK 0x0004 /* Address Not Acknowledged */ +#define DNAK 0x0008 /* Data Not Acknowledged */ +#define BUFRDERR 0x0010 /* Buffer Read Error */ +#define BUFWRERR 0x0020 /* Buffer Write Error */ +#define SDASEN 0x0040 /* Serial Data Sense */ +#define SCLSEN 0x0080 /* Serial Clock Sense */ +#define BUSBUSY 0x0100 /* Bus Busy Indicator */ + +/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ +#define SINIT 0x0001 /* Slave Transfer Initiated */ +#define SCOMP 0x0002 /* Slave Transfer Complete */ +#define SERR 0x0004 /* Slave Transfer Error */ +#define SOVF 0x0008 /* Slave Overflow */ +#define MCOMP 0x0010 /* Master Transfer Complete */ +#define MERR 0x0020 /* Master Transfer Error */ +#define XMTSERV 0x0040 /* Transmit FIFO Service */ +#define RCVSERV 0x0080 /* Receive FIFO Service */ + +/* TWI_FIFO_CTRL Masks */ +#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ +#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ + +/* TWI_FIFO_STAT Masks */ +#define XMTSTAT 0x0003 /* Transmit FIFO Status */ +#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ +#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ +#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ + +#define RCVSTAT 0x000C /* Receive FIFO Status */ +#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ +#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ +#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ + +/* + * CONTROLLER AREA NETWORK (CAN) MASKS + */ +/* CAN_CONTROL Masks */ +#define SRS 0x0001 /* Software Reset */ +#define DNM 0x0002 /* Device Net Mode */ +#define ABO 0x0004 /* Auto-Bus On Enable */ +#define TXPRIO 0x0008 /* TX Priority (Priority/Mailbox*) */ +#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */ +#define SMR 0x0020 /* Sleep Mode Request */ +#define CSR 0x0040 /* CAN Suspend Mode Request */ +#define CCR 0x0080 /* CAN Configuration Mode Request */ + +/* CAN_STATUS Masks */ +#define WT 0x0001 /* TX Warning Flag */ +#define WR 0x0002 /* RX Warning Flag */ +#define EP 0x0004 /* Error Passive Mode */ +#define EBO 0x0008 /* Error Bus Off Mode */ +#define SMA 0x0020 /* Sleep Mode Acknowledge */ +#define CSA 0x0040 /* Suspend Mode Acknowledge */ +#define CCA 0x0080 /* Configuration Mode Acknowledge */ +#define MBPTR 0x1F00 /* Mailbox Pointer */ +#define TRM 0x4000 /* Transmit Mode */ +#define REC 0x8000 /* Receive Mode */ + +/* CAN_CLOCK Masks */ +#define BRP 0x03FF /* Bit-Rate Pre-Scaler */ + +/* CAN_TIMING Masks */ +#define TSEG1 0x000F /* Time Segment 1 */ +#define TSEG2 0x0070 /* Time Segment 2 */ +#define SAM 0x0080 /* Sampling */ +#define SJW 0x0300 /* Synchronization Jump Width */ + +/* CAN_DEBUG Masks */ +#define DEC 0x0001 /* Disable CAN Error Counters */ +#define DRI 0x0002 /* Disable CAN RX Input */ +#define DTO 0x0004 /* Disable CAN TX Output */ +#define DIL 0x0008 /* Disable CAN Internal Loop */ +#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */ +#define MRB 0x0020 /* Mode Read Back Enable */ +#define CDE 0x8000 /* CAN Debug Enable */ + +/* CAN_CEC Masks */ +#define RXECNT 0x00FF /* Receive Error Counter */ +#define TXECNT 0xFF00 /* Transmit Error Counter */ + +/* CAN_INTR Masks */ +#define MBRIF 0x0001 /* Mailbox Receive Interrupt */ +#define MBTIF 0x0002 /* Mailbox Transmit Interrupt */ +#define GIRQ 0x0004 /* Global Interrupt */ +#define SMACK 0x0008 /* Sleep Mode Acknowledge */ +#define CANTX 0x0040 /* CAN TX Bus Value */ +#define CANRX 0x0080 /* CAN RX Bus Value */ + +/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */ +#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define IDE 0x2000 /* Identifier Extension */ +#define RTR 0x4000 /* Remote Frame Transmission Request */ +#define AME 0x8000 /* Acceptance Mask Enable */ + +/* CAN_MBxx_TIMESTAMP Masks */ +#define TSV 0xFFFF /* Timestamp */ + +/* CAN_MBxx_LENGTH Masks */ +#define DLC 0x000F /* Data Length Code */ + +/* CAN_AMxxH and CAN_AMxxL Masks */ +#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */ +#define FMD 0x4000 /* Full Mask Data Field Enable */ +#define FDF 0x8000 /* Filter On Data Field Enable */ + +/* CAN_MC1 Masks */ +#define MC0 0x0001 /* Enable Mailbox 0 */ +#define MC1 0x0002 /* Enable Mailbox 1 */ +#define MC2 0x0004 /* Enable Mailbox 2 */ +#define MC3 0x0008 /* Enable Mailbox 3 */ +#define MC4 0x0010 /* Enable Mailbox 4 */ +#define MC5 0x0020 /* Enable Mailbox 5 */ +#define MC6 0x0040 /* Enable Mailbox 6 */ +#define MC7 0x0080 /* Enable Mailbox 7 */ +#define MC8 0x0100 /* Enable Mailbox 8 */ +#define MC9 0x0200 /* Enable Mailbox 9 */ +#define MC10 0x0400 /* Enable Mailbox 10 */ +#define MC11 0x0800 /* Enable Mailbox 11 */ +#define MC12 0x1000 /* Enable Mailbox 12 */ +#define MC13 0x2000 /* Enable Mailbox 13 */ +#define MC14 0x4000 /* Enable Mailbox 14 */ +#define MC15 0x8000 /* Enable Mailbox 15 */ + +/* CAN_MC2 Masks */ +#define MC16 0x0001 /* Enable Mailbox 16 */ +#define MC17 0x0002 /* Enable Mailbox 17 */ +#define MC18 0x0004 /* Enable Mailbox 18 */ +#define MC19 0x0008 /* Enable Mailbox 19 */ +#define MC20 0x0010 /* Enable Mailbox 20 */ +#define MC21 0x0020 /* Enable Mailbox 21 */ +#define MC22 0x0040 /* Enable Mailbox 22 */ +#define MC23 0x0080 /* Enable Mailbox 23 */ +#define MC24 0x0100 /* Enable Mailbox 24 */ +#define MC25 0x0200 /* Enable Mailbox 25 */ +#define MC26 0x0400 /* Enable Mailbox 26 */ +#define MC27 0x0800 /* Enable Mailbox 27 */ +#define MC28 0x1000 /* Enable Mailbox 28 */ +#define MC29 0x2000 /* Enable Mailbox 29 */ +#define MC30 0x4000 /* Enable Mailbox 30 */ +#define MC31 0x8000 /* Enable Mailbox 31 */ + +/* CAN_MD1 Masks */ +#define MD0 0x0001 /* Enable Mailbox 0 For Receive */ +#define MD1 0x0002 /* Enable Mailbox 1 For Receive */ +#define MD2 0x0004 /* Enable Mailbox 2 For Receive */ +#define MD3 0x0008 /* Enable Mailbox 3 For Receive */ +#define MD4 0x0010 /* Enable Mailbox 4 For Receive */ +#define MD5 0x0020 /* Enable Mailbox 5 For Receive */ +#define MD6 0x0040 /* Enable Mailbox 6 For Receive */ +#define MD7 0x0080 /* Enable Mailbox 7 For Receive */ +#define MD8 0x0100 /* Enable Mailbox 8 For Receive */ +#define MD9 0x0200 /* Enable Mailbox 9 For Receive */ +#define MD10 0x0400 /* Enable Mailbox 10 For Receive */ +#define MD11 0x0800 /* Enable Mailbox 11 For Receive */ +#define MD12 0x1000 /* Enable Mailbox 12 For Receive */ +#define MD13 0x2000 /* Enable Mailbox 13 For Receive */ +#define MD14 0x4000 /* Enable Mailbox 14 For Receive */ +#define MD15 0x8000 /* Enable Mailbox 15 For Receive */ + +/* CAN_MD2 Masks */ +#define MD16 0x0001 /* Enable Mailbox 16 For Receive */ +#define MD17 0x0002 /* Enable Mailbox 17 For Receive */ +#define MD18 0x0004 /* Enable Mailbox 18 For Receive */ +#define MD19 0x0008 /* Enable Mailbox 19 For Receive */ +#define MD20 0x0010 /* Enable Mailbox 20 For Receive */ +#define MD21 0x0020 /* Enable Mailbox 21 For Receive */ +#define MD22 0x0040 /* Enable Mailbox 22 For Receive */ +#define MD23 0x0080 /* Enable Mailbox 23 For Receive */ +#define MD24 0x0100 /* Enable Mailbox 24 For Receive */ +#define MD25 0x0200 /* Enable Mailbox 25 For Receive */ +#define MD26 0x0400 /* Enable Mailbox 26 For Receive */ +#define MD27 0x0800 /* Enable Mailbox 27 For Receive */ +#define MD28 0x1000 /* Enable Mailbox 28 For Receive */ +#define MD29 0x2000 /* Enable Mailbox 29 For Receive */ +#define MD30 0x4000 /* Enable Mailbox 30 For Receive */ +#define MD31 0x8000 /* Enable Mailbox 31 For Receive */ + +/* CAN_RMP1 Masks */ +#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */ +#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */ +#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */ +#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */ +#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */ +#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */ +#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */ +#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */ +#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */ +#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */ +#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */ +#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */ +#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */ +#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */ +#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */ +#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */ + +/* CAN_RMP2 Masks */ +#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */ +#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */ +#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */ +#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */ +#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */ +#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */ +#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */ +#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */ +#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */ +#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */ +#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */ +#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */ +#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */ +#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */ +#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */ +#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */ + +/* CAN_RML1 Masks */ +#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */ +#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */ +#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */ +#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */ +#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */ +#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */ +#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */ +#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */ +#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */ +#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */ +#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */ +#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */ +#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */ +#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */ +#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */ +#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */ + +/* CAN_RML2 Masks */ +#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */ +#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */ +#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */ +#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */ +#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */ +#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */ +#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */ +#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */ +#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */ +#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */ +#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */ +#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */ +#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */ +#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */ +#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */ +#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */ + +/* CAN_OPSS1 Masks */ +#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */ +#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */ +#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */ +#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */ +#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */ +#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */ +#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */ +#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */ +#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */ +#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */ +#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */ +#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */ +#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */ +#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */ +#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */ +#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */ + +/* CAN_OPSS2 Masks */ +#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */ +#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */ +#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */ +#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */ +#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */ +#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */ +#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */ +#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */ +#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */ +#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */ +#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */ +#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */ +#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */ +#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */ +#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */ +#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */ + +/* CAN_TRR1 Masks */ +#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */ +#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */ +#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */ +#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */ +#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */ +#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */ +#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */ +#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */ +#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */ +#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */ +#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */ +#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */ +#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */ +#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */ +#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */ +#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */ + +/* CAN_TRR2 Masks */ +#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */ +#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */ +#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */ +#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */ +#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */ +#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */ +#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */ +#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */ +#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */ +#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */ +#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */ +#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */ +#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */ +#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */ +#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */ +#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */ + +/* CAN_TRS1 Masks */ +#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */ +#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */ +#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */ +#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */ +#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */ +#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */ +#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */ +#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */ +#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */ +#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */ +#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */ +#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */ +#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */ +#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */ +#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */ +#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */ + +/* CAN_TRS2 Masks */ +#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */ +#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */ +#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */ +#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */ +#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */ +#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */ +#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */ +#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */ +#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */ +#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */ +#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */ +#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */ +#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */ +#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */ +#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */ +#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */ + +/* CAN_AA1 Masks */ +#define AA0 0x0001 /* Aborted Message In Mailbox 0 */ +#define AA1 0x0002 /* Aborted Message In Mailbox 1 */ +#define AA2 0x0004 /* Aborted Message In Mailbox 2 */ +#define AA3 0x0008 /* Aborted Message In Mailbox 3 */ +#define AA4 0x0010 /* Aborted Message In Mailbox 4 */ +#define AA5 0x0020 /* Aborted Message In Mailbox 5 */ +#define AA6 0x0040 /* Aborted Message In Mailbox 6 */ +#define AA7 0x0080 /* Aborted Message In Mailbox 7 */ +#define AA8 0x0100 /* Aborted Message In Mailbox 8 */ +#define AA9 0x0200 /* Aborted Message In Mailbox 9 */ +#define AA10 0x0400 /* Aborted Message In Mailbox 10 */ +#define AA11 0x0800 /* Aborted Message In Mailbox 11 */ +#define AA12 0x1000 /* Aborted Message In Mailbox 12 */ +#define AA13 0x2000 /* Aborted Message In Mailbox 13 */ +#define AA14 0x4000 /* Aborted Message In Mailbox 14 */ +#define AA15 0x8000 /* Aborted Message In Mailbox 15 */ + +/* CAN_AA2 Masks */ +#define AA16 0x0001 /* Aborted Message In Mailbox 16 */ +#define AA17 0x0002 /* Aborted Message In Mailbox 17 */ +#define AA18 0x0004 /* Aborted Message In Mailbox 18 */ +#define AA19 0x0008 /* Aborted Message In Mailbox 19 */ +#define AA20 0x0010 /* Aborted Message In Mailbox 20 */ +#define AA21 0x0020 /* Aborted Message In Mailbox 21 */ +#define AA22 0x0040 /* Aborted Message In Mailbox 22 */ +#define AA23 0x0080 /* Aborted Message In Mailbox 23 */ +#define AA24 0x0100 /* Aborted Message In Mailbox 24 */ +#define AA25 0x0200 /* Aborted Message In Mailbox 25 */ +#define AA26 0x0400 /* Aborted Message In Mailbox 26 */ +#define AA27 0x0800 /* Aborted Message In Mailbox 27 */ +#define AA28 0x1000 /* Aborted Message In Mailbox 28 */ +#define AA29 0x2000 /* Aborted Message In Mailbox 29 */ +#define AA30 0x4000 /* Aborted Message In Mailbox 30 */ +#define AA31 0x8000 /* Aborted Message In Mailbox 31 */ + +/* CAN_TA1 Masks */ +#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */ +#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */ +#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */ +#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */ +#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */ +#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */ +#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */ +#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */ +#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */ +#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */ +#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */ +#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */ +#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */ +#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */ +#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */ +#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */ + +/* CAN_TA2 Masks */ +#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */ +#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */ +#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */ +#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */ +#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */ +#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */ +#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */ +#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */ +#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */ +#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */ +#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */ +#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */ +#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */ +#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */ +#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */ +#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */ + +/* CAN_MBTD Masks */ +#define TDPTR 0x001F /* Mailbox To Temporarily Disable */ +#define TDA 0x0040 /* Temporary Disable Acknowledge */ +#define TDR 0x0080 /* Temporary Disable Request */ + +/* CAN_RFH1 Masks */ +#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */ +#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */ +#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */ +#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */ +#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */ +#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */ +#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */ +#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */ +#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */ +#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */ +#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */ +#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */ +#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */ +#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */ +#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */ +#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */ + +/* CAN_RFH2 Masks */ +#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */ +#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */ +#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */ +#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */ +#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */ +#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */ +#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */ +#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */ +#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */ +#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */ +#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */ +#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */ +#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */ +#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */ +#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */ +#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */ + +/* CAN_MBTIF1 Masks */ +#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */ +#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */ +#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */ +#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */ +#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */ +#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */ +#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */ +#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */ +#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */ +#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */ +#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */ +#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */ +#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */ +#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */ +#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */ +#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */ + +/* CAN_MBTIF2 Masks */ +#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */ +#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */ +#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */ +#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */ +#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */ +#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */ +#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */ +#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */ +#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */ +#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */ +#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */ +#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */ +#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */ +#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */ +#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */ +#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */ + +/* CAN_MBRIF1 Masks */ +#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */ +#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */ +#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */ +#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */ +#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */ +#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */ +#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */ +#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */ +#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */ +#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */ +#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */ +#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */ +#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */ +#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */ +#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */ +#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */ + +/* CAN_MBRIF2 Masks */ +#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */ +#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */ +#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */ +#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */ +#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */ +#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */ +#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */ +#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */ +#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */ +#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */ +#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */ +#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */ +#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */ +#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */ +#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */ +#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */ + +/* CAN_MBIM1 Masks */ +#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */ +#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */ +#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */ +#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */ +#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */ +#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */ +#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */ +#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */ +#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */ +#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */ +#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */ +#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */ +#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */ +#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */ +#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */ +#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */ + +/* CAN_MBIM2 Masks */ +#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */ +#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */ +#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */ +#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */ +#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */ +#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */ +#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */ +#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */ +#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */ +#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */ +#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */ +#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */ +#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */ +#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */ +#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */ +#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */ + +/* CAN_GIM Masks */ +#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */ +#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */ +#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */ +#define BOIM 0x0008 /* Enable Bus Off Interrupt */ +#define WUIM 0x0010 /* Enable Wake-Up Interrupt */ +#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */ +#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */ +#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */ +#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */ +#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */ +#define ADIM 0x0400 /* Enable Access Denied Interrupt */ + +/* CAN_GIS Masks */ +#define EWTIS 0x0001 /* TX Error Count IRQ Status */ +#define EWRIS 0x0002 /* RX Error Count IRQ Status */ +#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */ +#define BOIS 0x0008 /* Bus Off IRQ Status */ +#define WUIS 0x0010 /* Wake-Up IRQ Status */ +#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */ +#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */ +#define RMLIS 0x0080 /* RX Message Lost IRQ Status */ +#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */ +#define EXTIS 0x0200 /* External Trigger Output IRQ Status */ +#define ADIS 0x0400 /* Access Denied IRQ Status */ + +/* CAN_GIF Masks */ +#define EWTIF 0x0001 /* TX Error Count IRQ Flag */ +#define EWRIF 0x0002 /* RX Error Count IRQ Flag */ +#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */ +#define BOIF 0x0008 /* Bus Off IRQ Flag */ +#define WUIF 0x0010 /* Wake-Up IRQ Flag */ +#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */ +#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */ +#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */ +#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */ +#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */ +#define ADIF 0x0400 /* Access Denied IRQ Flag */ + +/* CAN_UCCNF Masks */ +#define UCCNF 0x000F /* Universal Counter Mode */ +#define UC_STAMP 0x0001 /* Timestamp Mode */ +#define UC_WDOG 0x0002 /* Watchdog Mode */ +#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */ +#define UC_ERROR 0x0006 /* CAN Error Frame Count */ +#define UC_OVER 0x0007 /* CAN Overload Frame Count */ +#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */ +#define UC_AA 0x0009 /* TX Abort Count */ +#define UC_TA 0x000A /* TX Successful Count */ +#define UC_REJECT 0x000B /* RX Message Rejected Count */ +#define UC_RML 0x000C /* RX Message Lost Count */ +#define UC_RX 0x000D /* Total Successful RX Messages Count */ +#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */ +#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */ +#define UCRC 0x0020 /* Universal Counter Reload/Clear */ +#define UCCT 0x0040 /* Universal Counter CAN Trigger */ +#define UCE 0x0080 /* Universal Counter Enable */ + +/* CAN_ESR Masks */ +#define ACKE 0x0004 /* Acknowledge Error */ +#define SER 0x0008 /* Stuff Error */ +#define CRCE 0x0010 /* CRC Error */ +#define SA0 0x0020 /* Stuck At Dominant Error */ +#define BEF 0x0040 /* Bit Error Flag */ +#define FER 0x0080 /* Form Error Flag */ + +/* CAN_EWR Masks */ +#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */ +#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */ + +/* + * PIN CONTROL REGISTER MASKS + */ +/* PORT_MUX Masks */ +#define PJSE 0x0001 /* Port J SPI/SPORT Enable */ +#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */ +#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */ + +#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */ +#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */ +#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */ +#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */ + +#define PFDE 0x0008 /* Port F DMA Request Enable */ +#define PGDE_UART 0x0000 /* Enable UART0 RX/TX */ +#define PGDE_DMA 0x0008 /* Enable DMAR1:0 */ + +#define PFTE 0x0010 /* Port F Timer Enable */ +#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */ +#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */ + +#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */ +#define PFS6E_TIMER 0x0000 /* Enable TMR5 */ +#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */ + +#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */ +#define PFS5E_TIMER 0x0000 /* Enable TMR4 */ +#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */ + +#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */ +#define PFS4E_TIMER 0x0000 /* Enable TMR3 */ +#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */ + +#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */ +#define PFFE_TIMER 0x0000 /* Enable TMR2 */ +#define PFFE_PPI 0x0100 /* Enable PPI FS3 */ + +#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */ +#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */ +#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */ + +#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */ +#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */ +#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */ + +#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */ +#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ +#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ + +/* + * HANDSHAKE DMA (HDMA) MASKS + */ +/* HDMAx_CTL Masks */ +#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */ +#define REP 0x0002 /* HDMA Request Polarity */ +#define UTE 0x0004 /* Urgency Threshold Enable */ +#define OIE 0x0010 /* Overflow Interrupt Enable */ +#define BDIE 0x0020 /* Block Done Interrupt Enable */ +#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */ +#define DRQ 0x0300 /* HDMA Request Type */ +#define DRQ_NONE 0x0000 /* No Request */ +#define DRQ_SINGLE 0x0100 /* Channels Request Single */ +#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */ +#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */ +#define RBC 0x1000 /* Reload BCNT With IBCNT */ +#define PS 0x2000 /* HDMA Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +/* entry addresses of the user-callable Boot ROM functions */ + +#define _BOOTROM_RESET 0xEF000000 +#define _BOOTROM_FINAL_INIT 0xEF000002 +#define _BOOTROM_DO_MEMORY_DMA 0xEF000006 +#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 +#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A +#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C +#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 +#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 +#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 + +#endif /* _DEF_BF534_H */ diff --git a/include/asm-blackfin/arch-bf537/defBF537.h b/include/asm-blackfin/arch-bf537/defBF537.h new file mode 100644 index 0000000..8d16c37 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/defBF537.h @@ -0,0 +1,488 @@ +/* + * Copyright (C) 2004-2005 Analog Devices Inc., All Rights Reserved. + * + *********************************************************************************** + * + * This include file contains a list of macro "defines" to enable the programmer + * to use symbolic names for register-access and bit-manipulation. + * + * ---------------------------- + * revision 0.1 + * date: 2004/03/01 21:23:01; author: joeb + * Initial revision + * + * ---------------------------- + * revision 0.2 + * date: 2004/05/15 16:30:00; author: joeb + * comments: removed I2C/IIC references, changed GPIO sections + * + * ---------------------------- + * revision 0.3 + * date: 2004/06/08 12:25:00; author: joeb + * comments: fixed mis-mapped TIMER registers, changed TWI register names, fixed + * FLAG references in GPIO register names + * + * ---------------------------- + * revision 0.4 + * date: 2004/06/09 2:25:00; author: joeb + * comments: fixed bit-defines for EMAC section, renamed EMAC count registers, + * combined 2 Timer status registers into one + * + * ---------------------------- + * revision 0.5 + * date: 2004/08/10 10:25:00; author: joeb + * comments: Renamed EMAC wake-up registers, changed bit-names in EMAC registers + * + * ---------------------------- + * revision 0.6 + * date: 2004/08/17 16:25:00; author: joeb + * comments: Renamed TWI_INT_ENABLE to TWI_INT_MASK + * + * ---------------------------- + * revision 0.7 + * date: 2004/08/18 13:21:00; author: joeb + * comments: Renamed GPIO registers to remove _D, _S, _C, _T suffixes + * + * ---------------------------- + * revision 0.8 + * date: 2004/08/20 10:24:00; author: joeb + * comments: Renamed External DMA to Handshake MDMA + * + * ---------------------------- + * revision 0.9 + * date: 2004/08/23 13:42:00; author: joeb + * comments: Renamed Handshake DMA Register Set + * + * ---------------------------- + * revision 0.10 + * date: 2004/09/07 11:21:00; author: joeb + * comments: Fixed EMAC TX/RX DMA Priority (DMA and SIC Bit Names) + * + * ---------------------------- + * revision 0.11 + * date: 2004/09/28 15:14:00; author: joeb + * comments: Fixed CAN Mailbox Area + * + * ---------------------------- + * revision 0.12 + * date: 2004/10/27 13:18:00; author: joeb + * comments: Added IEEE EMAC Register Support + * + * ---------------------------- + * revision 0.13 + * date: 2004/10/28 15:40:00; author: joeb + * comments: Shortened EMAC Count Register Names + * + * ---------------------------- + * revision 0.14 + * date: 2004/11/09 10:45:00; author: joeb + * comments: Fixed WDSIZE macros + * + * ---------------------------- + * revision 0.15 + * date: 2004/11/18 07:45:00; author: joeb + * comments: Fixed TIMER_STATUS register, added EMAC macros + * + * ---------------------------- + * revision 0.16 + * date: 2004/12/13 11:05:00; author: joeb + * comments: Removed HI/LO macros (now Assembler mnemonics) + * Renamed enable bit for HMDMA from EN to HMDMAEN + * + * ---------------------------- + * revision 0.17 + * date: 2004/12/17 14:25:00; author: joeb + * comments: Replaced C++ Single-Line Comments w/C-standard Comments + * Changed EMAC EQ1024 TX/RX References to GE1024 + * + * ---------------------------- + * revision 0.18 + * date: 2005/01/05 10:50:00; author: joeb + * comments: Added CAN Macros To Index Mailbox Area and Acceptance Masks + * Added mask values for field deposit protection + * + * ---------------------------- + * revision 0.19 + * date: 2005/01/10 10:30:00; author: joeb + * comments: Made all Macro argument syntax compliant to MISRA-C 2004 rule 19.10. + * + * ---------------------------- + * revision 0.20 + * date: 2005/01/27 14:25:15; author: joeb + * comments: Moved MMRs common to BF534 to BF534 header. + */ +#ifndef _DEF_BF537_H +#define _DEF_BF537_H + +/* Include all Core registers and bit definitions */ +#include <asm/arch-common/def_LPBlackfin.h> + +/* Include all MMR and bit defines common to BF534 */ +#include <asm/arch-bf537/defBF534.h> + +/* + * Define EMAC Section Unique to BF536/BF537 + */ + +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ +#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ +#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ +#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ +#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ +#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ +#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ +#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ +#define EMAC_FLC 0xFFC0301C /* Flow Control Register */ +#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ +#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ +#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ +#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ +#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ +#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ +#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ +#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ +#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ +#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ +#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ + +#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ +#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ +#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ +#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ +#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ +#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ +#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ +#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ + +#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ +#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ +#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ +#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ +#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ + +#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ +#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ +#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ +#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ +#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ +#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ +#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ +#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ +#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ +#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ +#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ +#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ +#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ +#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ +#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ +#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ +#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ +#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ +#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ +#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 <= x < 128 */ +#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ +#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ +#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ +#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ +#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ +#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ +#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ +#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ +#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ +#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ +#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ +#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ +#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ +#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ +#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ +#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ +#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ +#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 <= x < 128 */ +#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ + +/* Listing for IEEE-Supported Count Registers */ +#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ +#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ +#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ +#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ +#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ +#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ +#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ +#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ +#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ +#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ +#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ +#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ +#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ +#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ +#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ +#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ +#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ +#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ +#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 <= x < 128 */ +#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ +#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ +#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ +#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ +#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ +#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ +#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ +#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ +#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ +#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ +#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ +#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ +#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ +#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ +#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ +#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ +#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 <= x < 128 */ +#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ + +/* + * System MMR Register Bits And Macros + * + * Disclaimer: All macros are intended to make C and Assembly code more readable. + * Use these macros carefully, as any that do left shifts for field + * depositing will result in the lower order bits being destroyed. Any + * macro that shifts left to properly position the bit-field should be + * used as part of an OR to initialize a register and NOT as a dynamic + * modifier UNLESS the lower order bits are saved and ORed back in when + * the macro is used. + */ +/* + * ETHERNET 10/100 CONTROLLER MASKS + */ +/* EMAC_OPMODE Masks */ +#define RE 0x00000001 /* Receiver Enable */ +#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ +#define HU 0x00000010 /* Hash Filter Unicast Address */ +#define HM 0x00000020 /* Hash Filter Multicast Address */ +#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ +#define PR 0x00000080 /* Promiscuous Mode Enable */ +#define IFE 0x00000100 /* Inverse Filtering Enable */ +#define DBF 0x00000200 /* Disable Broadcast Frame Reception */ +#define PBF 0x00000400 /* Pass Bad Frames Enable */ +#define PSF 0x00000800 /* Pass Short Frames Enable */ +#define RAF 0x00001000 /* Receive-All Mode */ +#define TE 0x00010000 /* Transmitter Enable */ +#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ +#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ +#define DC 0x00080000 /* Deferral Check */ +#define BOLMT 0x00300000 /* Back-Off Limit */ +#define BOLMT_10 0x00000000 /* 10-bit range */ +#define BOLMT_8 0x00100000 /* 8-bit range */ +#define BOLMT_4 0x00200000 /* 4-bit range */ +#define BOLMT_1 0x00300000 /* 1-bit range */ +#define DRTY 0x00400000 /* Disable TX Retry On Collision */ +#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ +#define RMII 0x01000000 /* RMII/MII* Mode */ +#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ +#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ +#define LB 0x08000000 /* Internal Loopback Enable */ +#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ + +/* EMAC_STAADD Masks */ +#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ +#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ +#define STADISPRE 0x00000004 /* Disable Preamble Generation */ +#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ +#define REGAD 0x000007C0 /* STA Register Address */ +#define PHYAD 0x0000F800 /* PHY Device Address */ + +#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ +#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ + +/* EMAC_STADAT Mask */ +#define STADATA 0x0000FFFF /* Station Management Data */ + +/* EMAC_FLC Masks */ +#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ +#define FLCE 0x00000002 /* Flow Control Enable */ +#define PCF 0x00000004 /* Pass Control Frames */ +#define BKPRSEN 0x00000008 /* Enable Backpressure */ +#define FLCPAUSE 0xFFFF0000 /* Pause Time */ + +#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ + +/* EMAC_WKUP_CTL Masks */ +#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ +#define MPKE 0x00000002 /* Magic Packet Enable */ +#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ +#define GUWKE 0x00000008 /* Global Unicast Wake Enable */ +#define MPKS 0x00000020 /* Magic Packet Received Status */ +#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ + +/* EMAC_WKUP_FFCMD Masks */ +#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ +#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ +#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ +#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ +#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ +#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ +#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ +#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ + +/* EMAC_WKUP_FFOFF Masks */ +#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ +#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ +#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ +#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ + +#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ +#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ +#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ +#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ +/* Set ALL Offsets */ +#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) + +/* EMAC_WKUP_FFCRC0 Masks */ +#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ +#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ + +#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0) /* Set Wake-Up Filter 0 Target CRC */ +#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16) /* Set Wake-Up Filter 1 Target CRC */ + +/* EMAC_WKUP_FFCRC1 Masks */ +#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ +#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ + +#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0) /* Set Wake-Up Filter 2 Target CRC */ +#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16) /* Set Wake-Up Filter 3 Target CRC */ + +/* EMAC_SYSCTL Masks */ +#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ +#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ +#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ +#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ + +#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ + +/* EMAC_SYSTAT Masks */ +#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ +#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ +#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ +#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ +#define WAKEDET 0x00000010 /* Wake-Up Detected Status */ +#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ +#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ +#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ + +/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ +#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ +#define RX_COMP 0x00001000 /* RX Frame Complete */ +#define RX_OK 0x00002000 /* RX Frame Received With No Errors */ +#define RX_LONG 0x00004000 /* RX Frame Too Long Error */ +#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ +#define RX_CRC 0x00010000 /* RX Frame CRC Error */ +#define RX_LEN 0x00020000 /* RX Frame Length Error */ +#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ +#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ +#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ +#define RX_PHY 0x00200000 /* RX Frame PHY Error */ +#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ +#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ +#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ +#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ +#define RX_CTL 0x04000000 /* RX Control Frame Indicator */ +#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ +#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ +#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ +#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ +#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ + +/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ +#define TX_COMP 0x00000001 /* TX Frame Complete */ +#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ +#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ +#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ +#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ +#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ +#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ +#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ +#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ +#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ +#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ +#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ +#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ +#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ +#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ + +/* EMAC_MMC_CTL Masks */ +#define RSTC 0x00000001 /* Reset All Counters */ +#define CROLL 0x00000002 /* Counter Roll-Over Enable */ +#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ +#define MMCE 0x00000008 /* Enable MMC Counter Operation */ + +/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ +#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ +#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ +#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ +#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ +#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ +#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ +#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ +#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ +#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ +#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ +#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ +#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ +#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ +#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ +#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ +#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ +#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ +#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ +#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ +#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ +#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ +#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ +#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ +#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ + +/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ +#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ +#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ +#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ +#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ +#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ +#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ +#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ +#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ +#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ +#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ +#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ +#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ +#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ +#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ +#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ +#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ +#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ +#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ +#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ +#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ +#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ +#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ +#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ + +#endif /* _DEF_BF537_H */ diff --git a/include/asm-blackfin/arch-bf537/defBF537_extn.h b/include/asm-blackfin/arch-bf537/defBF537_extn.h new file mode 100644 index 0000000..8090da6 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/defBF537_extn.h @@ -0,0 +1,76 @@ +/* + * defBF537_extn.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _DEF_BF537_EXTN_H +#define _DEF_BF537_EXTN_H + +#define OFFSET_( x ) ((x) & 0x0000FFFF) /* define macro for offset */ +/* Delay inserted for PLL transition */ +#define PLL_DELAY 0x1000 + +#define L1_ISRAM 0xFFA00000 +#define L1_ISRAM_END 0xFFA10000 +#define DATA_BANKA_SRAM 0xFF800000 +#define DATA_BANKA_SRAM_END 0xFF808000 +#define DATA_BANKB_SRAM 0xFF900000 +#define DATA_BANKB_SRAM_END 0xFF908000 +#define SYSMMR_BASE 0xFFC00000 +#define WDSIZE16 0x00000004 + +/* Event Vector Table Address */ +#define EVT_EMULATION_ADDR 0xffe02000 +#define EVT_RESET_ADDR 0xffe02004 +#define EVT_NMI_ADDR 0xffe02008 +#define EVT_EXCEPTION_ADDR 0xffe0200c +#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010 +#define EVT_HARDWARE_ERROR_ADDR 0xffe02014 +#define EVT_TIMER_ADDR 0xffe02018 +#define EVT_IVG7_ADDR 0xffe0201c +#define EVT_IVG8_ADDR 0xffe02020 +#define EVT_IVG9_ADDR 0xffe02024 +#define EVT_IVG10_ADDR 0xffe02028 +#define EVT_IVG11_ADDR 0xffe0202c +#define EVT_IVG12_ADDR 0xffe02030 +#define EVT_IVG13_ADDR 0xffe02034 +#define EVT_IVG14_ADDR 0xffe02038 +#define EVT_IVG15_ADDR 0xffe0203c +#define EVT_OVERRIDE_ADDR 0xffe02100 + +/* IMASK Bit values */ +#define IVG15_POS 0x00008000 +#define IVG14_POS 0x00004000 +#define IVG13_POS 0x00002000 +#define IVG12_POS 0x00001000 +#define IVG11_POS 0x00000800 +#define IVG10_POS 0x00000400 +#define IVG9_POS 0x00000200 +#define IVG8_POS 0x00000100 +#define IVG7_POS 0x00000080 +#define IVGTMR_POS 0x00000040 +#define IVGHW_POS 0x00000020 + +#define WDOG_TMR_DISABLE (0xAD << 4) +#define ICTL_RST 0x00000000 +#define ICTL_NMI 0x00000002 +#define ICTL_GP 0x00000004 +#define ICTL_DISABLE 0x00000003 + +/* Watch Dog timer values setup */ +#define WATCHDOG_DISABLE WDOG_TMR_DISABLE | ICTL_DISABLE + +#endif /* _DEF_BF537_EXTN_H */ diff --git a/include/asm-blackfin/arch-bf537/irq.h b/include/asm-blackfin/arch-bf537/irq.h new file mode 100644 index 0000000..4cb4c15 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/irq.h @@ -0,0 +1,94 @@ +/* + * U-boot bf537_irq.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c + * Changed by HuTao Apr18, 2003 + * + * Copyright was missing when I got the code so took from MIPS arch ...MaTed--- + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle + * + * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca> + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com> + * + * Adapted for BlackFin BF537 by Bas Vermeulen <bas@buyways.nl> + * Copyright (c) 2003 BuyWays B.V. (www.buyways.nl) + + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF537_IRQ_H_ +#define _BF537_IRQ_H_ + +/* + * Interrupt source definitions + * Event Source Core Event Name Number + * EMU 0 + * Reset RST 1 + * NMI NMI 2 + * Exception EVX 3 + * Reserved -- 4 + * Hardware Error IVHW 5 + * Core Timer IVTMR 6 + * PLL Wakeup Interrupt IVG7 7 + * DMA Error (generic) IVG7 8 + * PPI Error Interrupt IVG7 9 + * SPORT0 Error Interrupt IVG7 10 + * SPORT1 Error Interrupt IVG7 11 + * SPI Error Interrupt IVG7 12 + * UART Error Interrupt IVG7 13 + * RTC Interrupt IVG8 14 + * DMA0 Interrupt (PPI) IVG8 15 + * DMA1 (SPORT0 RX) IVG9 16 + * DMA2 (SPORT0 TX) IVG9 17 + * DMA3 (SPORT1 RX) IVG9 18 + * DMA4 (SPORT1 TX) IVG9 19 + * DMA5 (PPI) IVG10 20 + * DMA6 (UART RX) IVG10 21 + * DMA7 (UART TX) IVG10 22 + * Timer0 IVG11 23 + * Timer1 IVG11 24 + * Timer2 IVG11 25 + * PF Interrupt A IVG12 26 + * PF Interrupt B IVG12 27 + * DMA8/9 Interrupt IVG13 28 + * DMA10/11 Interrupt IVG13 29 + * Watchdog Timer IVG13 30 + * Software Interrupt 1 IVG14 31 + * Software Interrupt 2 -- + * (lowest priority) IVG15 32 + */ + +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* reset */ +#define IRQ_NMI 2 /* Non Maskable */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* - unused interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define IRQ_UART_RX_BIT 0x0800 +#define IRQ_UART_TX_BIT 0x1000 +#define IRQ_UART_ERROR_BIT 0x40 + +#endif diff --git a/include/asm-blackfin/arch-bf561/anomaly.h b/include/asm-blackfin/arch-bf561/anomaly.h new file mode 100644 index 0000000..467649b --- /dev/null +++ b/include/asm-blackfin/arch-bf561/anomaly.h @@ -0,0 +1,181 @@ +/* + * File: include/asm-blackfin/arch-bf561/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * This file shoule be up to date with: + * - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 or 0.4 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4)) +#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4 +#endif + +/* Issues that are common to 0.5 and 0.3 silicon */ +#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not + updated at the same time. */ +#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned + memory locations */ +#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR + registers */ +#define ANOMALY_05000127 /* Signbits instruction not functional under certain + conditions */ +#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits */ +#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz + and higher devices */ +#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */ +#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */ +#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not + functional */ +#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the + shadow of a conditional branch */ +#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop + may cause bad instruction fetches */ +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + external SPORT TX and RX clocks */ +#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */ +#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal + voltage regulator (VDDint) to increase */ +#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal + voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000274 /* Data cache write back to external synchronous memory + may be lost */ +#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */ +#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */ + +#if (defined(CONFIG_BF_REV_0_5)) +#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT + mode with external clock */ +#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to + using IMDMA */ +#endif + +#if (defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input) + Mode with 0 Frame Syncs */ +#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through + cache data writes */ +#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */ +#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */ +#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an + accumulator saturation */ +#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General + Purpose TX or RX modes */ +#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration + registers */ +#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with + External Frame Syncs */ +#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits + (not a meaningful mode) */ +#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer + Placement in Memory */ +#define ANOMALY_05000189 /* False Protection Exception */ +#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs + when polarity setting is changed */ +#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data + corruption */ +#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding + memory read */ +#define ANOMALY_05000199 /* DMA current address shows wrong value during carry + fix */ +#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during + inactive channels in certain conditions */ +#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG + situation */ +#define ANOMALY_05000204 /* Incorrect data read with write-through cache and + allocate cache lines on reads only mode */ +#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA + stopping */ +#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ +#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain + instructions */ +#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ +#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable + state */ +#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and + Non-Cached On-Chip L2 Memory */ +#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ +#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect + data */ +#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate + Differences in certain Conditions */ +#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ +#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in + multichannel mode */ +#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to + hardware reset */ +#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of + Control causes failures */ +#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) mode in certain conditions */ +#define ANOMALY_05000251 /* Exception not generated for MMR accesses in + reserved region */ +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12 + of the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB + exception */ +#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second + to last instruction in hardware loop */ +#define ANOMALY_05000276 /* Timing requirements change for External Frame + Sync PPI Modes with non-zero PPI_DELAY */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed + in a particular stage */ +#define ANOMALY_05000287 /* A read will receive incorrect data under certain + conditions */ +#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */ +#endif + +#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/arch-bf561/bf561_serial.h b/include/asm-blackfin/arch-bf561/bf561_serial.h new file mode 100644 index 0000000..0810228 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/bf561_serial.h @@ -0,0 +1,78 @@ +/* + * U-boot bf561_serial.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF561_SERIAL_H_ +#define _BF561_SERIAL_H_ + +#define BYTE_REF(addr) (*((volatile char*)addr)) +#define HALFWORD_REF(addr) (*((volatile short*)addr)) +#define WORD_REF(addr) (*((volatile long*)addr)) + +#define UART_THR_LO HALFWORD_REF(UART_THR) +#define UART_RBR_LO HALFWORD_REF(UART_RBR) +#define UART_DLL_LO HALFWORD_REF(UART_DLL) +#define UART_IER_LO HALFWORD_REF(UART_IER) +#define UART_IER_ERBFI 0x01 +#define UART_IER_ETBEI 0x02 +#define UART_IER_ELSI 0x04 +#define UART_IER_EDDSI 0x08 + +#define UART_DLH_LO HALFWORD_REF(UART_DLH) +#define UART_IIR_LO HALFWORD_REF(UART_IIR) +#define UART_IIR_NOINT 0x01 +#define UART_IIR_STATUS 0x06 +#define UART_IIR_LSR 0x06 +#define UART_IIR_RBR 0x04 +#define UART_IIR_THR 0x02 +#define UART_IIR_MSR 0x00 + +#define UART_LCR_LO HALFWORD_REF(UART_LCR) +#define UART_LCR_WLS5 0 +#define UART_LCR_WLS6 0x01 +#define UART_LCR_WLS7 0x02 +#define UART_LCR_WLS8 0x03 +#define UART_LCR_STB 0x04 +#define UART_LCR_PEN 0x08 +#define UART_LCR_EPS 0x10 +#define UART_LCR_SP 0x20 +#define UART_LCR_SB 0x40 +#define UART_LCR_DLAB 0x80 + +#define UART_MCR_LO HALFWORD_REF(UART_MCR) + +#define UART_LSR_LO HALFWORD_REF(UART_LSR) +#define UART_LSR_DR 0x01 +#define UART_LSR_OE 0x02 +#define UART_LSR_PE 0x04 +#define UART_LSR_FE 0x08 +#define UART_LSR_BI 0x10 +#define UART_LSR_THRE 0x20 +#define UART_LSR_TEMT 0x40 + +#define UART_MSR_LO HALFWORD_REF(UART_MSR) +#define UART_SCR_LO HALFWORD_REF(UART_SCR) +#define UART_GCTL_LO HALFWORD_REF(UART_GCTL) +#define UART_GCTL_UCEN 0x01 + +#endif diff --git a/include/asm-blackfin/arch-bf561/cdefBF561.h b/include/asm-blackfin/arch-bf561/cdefBF561.h new file mode 100644 index 0000000..f217ba7 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/cdefBF561.h @@ -0,0 +1,998 @@ +/* + * cdefBF561.h + * + * (c) Copyright 2001-2004 Analog Devices, Inc. All rights reserved. + * + */ + +/* C POINTERS TO SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 */ + +#ifndef _CDEF_BF561_H +#define _CDEF_BF561_H + +/* + * #if !defined(__ADSPBF561__) + * #warning cdefBF561.h should only be included for BF561 chip. + * #endif + */ + +/* include all Core registers and bit definitions */ +#include <asm/arch-bf561/defBF561.h> +#include <asm/arch-common/cdef_LPBlackfin.h> + +/* + * System MMR Register Map + */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define pPLL_CTL (volatile unsigned short *)PLL_CTL +#define pPLL_DIV (volatile unsigned short *)PLL_DIV +#define pVR_CTL (volatile unsigned short *)VR_CTL +#define pPLL_STAT (volatile unsigned short *)PLL_STAT +#define pPLL_LOCKCNT (volatile unsigned short *)PLL_LOCKCNT + +/* + * System Reset and Interrupt Controller registers for + * core A (0xFFC0 0100-0xFFC0 01FF) + */ +#define pSICA_SWRST (volatile unsigned short *)SICA_SWRST +#define pSICA_SYSCR (volatile unsigned short *)SICA_SYSCR +#define pSICA_RVECT (volatile unsigned short *)SICA_RVECT +#define pSICA_IMASK (volatile unsigned long *)SICA_IMASK +#define pSICA_IMASK0 (volatile unsigned long *)SICA_IMASK0 +#define pSICA_IMASK1 (volatile unsigned long *)SICA_IMASK1 +#define pSICA_IAR0 (volatile unsigned long *)SICA_IAR0 +#define pSICA_IAR1 (volatile unsigned long *)SICA_IAR1 +#define pSICA_IAR2 (volatile unsigned long *)SICA_IAR2 +#define pSICA_IAR3 (volatile unsigned long *)SICA_IAR3 +#define pSICA_IAR4 (volatile unsigned long *)SICA_IAR4 +#define pSICA_IAR5 (volatile unsigned long *)SICA_IAR5 +#define pSICA_IAR6 (volatile unsigned long *)SICA_IAR6 +#define pSICA_IAR7 (volatile unsigned long *)SICA_IAR7 +#define pSICA_ISR0 (volatile unsigned long *)SICA_ISR0 +#define pSICA_ISR1 (volatile unsigned long *)SICA_ISR1 +#define pSICA_IWR0 (volatile unsigned long *)SICA_IWR0 +#define pSICA_IWR1 (volatile unsigned long *)SICA_IWR1 + +/* + * System Reset and Interrupt Controller registers for + * Core B (0xFFC0 1100-0xFFC0 11FF) + */ +#define pSICB_SWRST (volatile unsigned short *)SICB_SWRST +#define pSICB_SYSCR (volatile unsigned short *)SICB_SYSCR +#define pSICB_RVECT (volatile unsigned short *)SICB_RVECT +#define pSICB_IMASK0 (volatile unsigned long *)SICB_IMASK0 +#define pSICB_IMASK1 (volatile unsigned long *)SICB_IMASK1 +#define pSICB_IAR0 (volatile unsigned long *)SICB_IAR0 +#define pSICB_IAR1 (volatile unsigned long *)SICB_IAR1 +#define pSICB_IAR2 (volatile unsigned long *)SICB_IAR2 +#define pSICB_IAR3 (volatile unsigned long *)SICB_IAR3 +#define pSICB_IAR4 (volatile unsigned long *)SICB_IAR4 +#define pSICB_IAR5 (volatile unsigned long *)SICB_IAR5 +#define pSICB_IAR6 (volatile unsigned long *)SICB_IAR6 +#define pSICB_IAR7 (volatile unsigned long *)SICB_IAR7 +#define pSICB_ISR0 (volatile unsigned long *)SICB_ISR0 +#define pSICB_ISR1 (volatile unsigned long *)SICB_ISR1 +#define pSICB_IWR0 (volatile unsigned long *)SICB_IWR0 +#define pSICB_IWR1 (volatile unsigned long *)SICB_IWR1 + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define pWDOGA_CTL (volatile unsigned short *)WDOGA_CTL +#define pWDOGA_CNT (volatile unsigned long *)WDOGA_CNT +#define pWDOGA_STAT (volatile unsigned long *)WDOGA_STAT + +/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */ +#define pWDOGB_CTL (volatile unsigned short *)WDOGB_CTL +#define pWDOGB_CNT (volatile unsigned long *)WDOGB_CNT +#define pWDOGB_STAT (volatile unsigned long *)WDOGB_STAT + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ +#define pUART_THR (volatile unsigned short *)UART_THR +#define pUART_RBR (volatile unsigned short *)UART_RBR +#define pUART_DLL (volatile unsigned short *)UART_DLL +#define pUART_IER (volatile unsigned short *)UART_IER +#define pUART_DLH (volatile unsigned short *)UART_DLH +#define pUART_IIR (volatile unsigned short *)UART_IIR +#define pUART_LCR (volatile unsigned short *)UART_LCR +#define pUART_MCR (volatile unsigned short *)UART_MCR +#define pUART_LSR (volatile unsigned short *)UART_LSR +#define pUART_MSR (volatile unsigned short *)UART_MSR +#define pUART_SCR (volatile unsigned short *)UART_SCR +#define pUART_GCTL (volatile unsigned short *)UART_GCTL + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define pSPI_CTL (volatile unsigned short *)SPI_CTL +#define pSPI_FLG (volatile unsigned short *)SPI_FLG +#define pSPI_STAT (volatile unsigned short *)SPI_STAT +#define pSPI_TDBR (volatile unsigned short *)SPI_TDBR +#define pSPI_RDBR (volatile unsigned short *)SPI_RDBR +#define pSPI_BAUD (volatile unsigned short *)SPI_BAUD +#define pSPI_SHADOW (volatile unsigned short *)SPI_SHADOW + +/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */ +#define pTIMER0_CONFIG (volatile unsigned short *)TIMER0_CONFIG +#define pTIMER0_COUNTER (volatile unsigned long *)TIMER0_COUNTER +#define pTIMER0_PERIOD (volatile unsigned long *)TIMER0_PERIOD +#define pTIMER0_WIDTH (volatile unsigned long *)TIMER0_WIDTH +#define pTIMER1_CONFIG (volatile unsigned short *)TIMER1_CONFIG +#define pTIMER1_COUNTER (volatile unsigned long *)TIMER1_COUNTER +#define pTIMER1_PERIOD (volatile unsigned long *)TIMER1_PERIOD +#define pTIMER1_WIDTH (volatile unsigned long *)TIMER1_WIDTH +#define pTIMER2_CONFIG (volatile unsigned short *)TIMER2_CONFIG +#define pTIMER2_COUNTER (volatile unsigned long *)TIMER2_COUNTER +#define pTIMER2_PERIOD (volatile unsigned long *)TIMER2_PERIOD +#define pTIMER2_WIDTH (volatile unsigned long *)TIMER2_WIDTH +#define pTIMER3_CONFIG (volatile unsigned short *)TIMER3_CONFIG +#define pTIMER3_COUNTER (volatile unsigned long *)TIMER3_COUNTER +#define pTIMER3_PERIOD (volatile unsigned long *)TIMER3_PERIOD +#define pTIMER3_WIDTH (volatile unsigned long *)TIMER3_WIDTH +#define pTIMER4_CONFIG (volatile unsigned short *)TIMER4_CONFIG +#define pTIMER4_COUNTER (volatile unsigned long *)TIMER4_COUNTER +#define pTIMER4_PERIOD (volatile unsigned long *)TIMER4_PERIOD +#define pTIMER4_WIDTH (volatile unsigned long *)TIMER4_WIDTH +#define pTIMER5_CONFIG (volatile unsigned short *)TIMER5_CONFIG +#define pTIMER5_COUNTER (volatile unsigned long *)TIMER5_COUNTER +#define pTIMER5_PERIOD (volatile unsigned long *)TIMER5_PERIOD +#define pTIMER5_WIDTH (volatile unsigned long *)TIMER5_WIDTH +#define pTIMER6_CONFIG (volatile unsigned short *)TIMER6_CONFIG +#define pTIMER6_COUNTER (volatile unsigned long *)TIMER6_COUNTER +#define pTIMER6_PERIOD (volatile unsigned long *)TIMER6_PERIOD +#define pTIMER6_WIDTH (volatile unsigned long *)TIMER6_WIDTH +#define pTIMER7_CONFIG (volatile unsigned short *)TIMER7_CONFIG +#define pTIMER7_COUNTER (volatile unsigned long *)TIMER7_COUNTER +#define pTIMER7_PERIOD (volatile unsigned long *)TIMER7_PERIOD +#define pTIMER7_WIDTH (volatile unsigned long *)TIMER7_WIDTH + +/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */ +#define pTMRS8_ENABLE (volatile unsigned short *)TMRS8_ENABLE +#define pTMRS8_DISABLE (volatile unsigned short *)TMRS8_DISABLE +#define pTMRS8_STATUS (volatile unsigned long *)TMRS8_STATUS +#define pTIMER8_CONFIG (volatile unsigned short *)TIMER8_CONFIG +#define pTIMER8_COUNTER (volatile unsigned long *)TIMER8_COUNTER +#define pTIMER8_PERIOD (volatile unsigned long *)TIMER8_PERIOD +#define pTIMER8_WIDTH (volatile unsigned long *)TIMER8_WIDTH +#define pTIMER9_CONFIG (volatile unsigned short *)TIMER9_CONFIG +#define pTIMER9_COUNTER (volatile unsigned long *)TIMER9_COUNTER +#define pTIMER9_PERIOD (volatile unsigned long *)TIMER9_PERIOD +#define pTIMER9_WIDTH (volatile unsigned long *)TIMER9_WIDTH +#define pTIMER10_CONFIG (volatile unsigned short *)TIMER10_CONFIG +#define pTIMER10_COUNTER (volatile unsigned long *)TIMER10_COUNTER +#define pTIMER10_PERIOD (volatile unsigned long *)TIMER10_PERIOD +#define pTIMER10_WIDTH (volatile unsigned long *)TIMER10_WIDTH +#define pTIMER11_CONFIG (volatile unsigned short *)TIMER11_CONFIG +#define pTIMER11_COUNTER (volatile unsigned long *)TIMER11_COUNTER +#define pTIMER11_PERIOD (volatile unsigned long *)TIMER11_PERIOD +#define pTIMER11_WIDTH (volatile unsigned long *)TIMER11_WIDTH +#define pTMRS4_ENABLE (volatile unsigned short *)TMRS4_ENABLE +#define pTMRS4_DISABLE (volatile unsigned short *)TMRS4_DISABLE +#define pTMRS4_STATUS (volatile unsigned long *)TMRS4_STATUS + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define pFIO0_FLAG_D (volatile unsigned short *)FIO0_FLAG_D +#define pFIO0_FLAG_C (volatile unsigned short *)FIO0_FLAG_C +#define pFIO0_FLAG_S (volatile unsigned short *)FIO0_FLAG_S +#define pFIO0_FLAG_T (volatile unsigned short *)FIO0_FLAG_T +#define pFIO0_MASKA_D (volatile unsigned short *)FIO0_MASKA_D +#define pFIO0_MASKA_C (volatile unsigned short *)FIO0_MASKA_C +#define pFIO0_MASKA_S (volatile unsigned short *)FIO0_MASKA_S +#define pFIO0_MASKA_T (volatile unsigned short *)FIO0_MASKA_T +#define pFIO0_MASKB_D (volatile unsigned short *)FIO0_MASKB_D +#define pFIO0_MASKB_C (volatile unsigned short *)FIO0_MASKB_C +#define pFIO0_MASKB_S (volatile unsigned short *)FIO0_MASKB_S +#define pFIO0_MASKB_T (volatile unsigned short *)FIO0_MASKB_T +#define pFIO0_DIR (volatile unsigned short *)FIO0_DIR +#define pFIO0_POLAR (volatile unsigned short *)FIO0_POLAR +#define pFIO0_EDGE (volatile unsigned short *)FIO0_EDGE +#define pFIO0_BOTH (volatile unsigned short *)FIO0_BOTH +#define pFIO0_INEN (volatile unsigned short *)FIO0_INEN + +/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */ +#define pFIO1_FLAG_D (volatile unsigned short *)FIO1_FLAG_D +#define pFIO1_FLAG_C (volatile unsigned short *)FIO1_FLAG_C +#define pFIO1_FLAG_S (volatile unsigned short *)FIO1_FLAG_S +#define pFIO1_FLAG_T (volatile unsigned short *)FIO1_FLAG_T +#define pFIO1_MASKA_D (volatile unsigned short *)FIO1_MASKA_D +#define pFIO1_MASKA_C (volatile unsigned short *)FIO1_MASKA_C +#define pFIO1_MASKA_S (volatile unsigned short *)FIO1_MASKA_S +#define pFIO1_MASKA_T (volatile unsigned short *)FIO1_MASKA_T +#define pFIO1_MASKB_D (volatile unsigned short *)FIO1_MASKB_D +#define pFIO1_MASKB_C (volatile unsigned short *)FIO1_MASKB_C +#define pFIO1_MASKB_S (volatile unsigned short *)FIO1_MASKB_S +#define pFIO1_MASKB_T (volatile unsigned short *)FIO1_MASKB_T +#define pFIO1_DIR (volatile unsigned short *)FIO1_DIR +#define pFIO1_POLAR (volatile unsigned short *)FIO1_POLAR +#define pFIO1_EDGE (volatile unsigned short *)FIO1_EDGE +#define pFIO1_BOTH (volatile unsigned short *)FIO1_BOTH +#define pFIO1_INEN (volatile unsigned short *)FIO1_INEN + +/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */ +#define pFIO2_FLAG_D (volatile unsigned short *)FIO2_FLAG_D +#define pFIO2_FLAG_C (volatile unsigned short *)FIO2_FLAG_C +#define pFIO2_FLAG_S (volatile unsigned short *)FIO2_FLAG_S +#define pFIO2_FLAG_T (volatile unsigned short *)FIO2_FLAG_T +#define pFIO2_MASKA_D (volatile unsigned short *)FIO2_MASKA_D +#define pFIO2_MASKA_C (volatile unsigned short *)FIO2_MASKA_C +#define pFIO2_MASKA_S (volatile unsigned short *)FIO2_MASKA_S +#define pFIO2_MASKA_T (volatile unsigned short *)FIO2_MASKA_T +#define pFIO2_MASKB_D (volatile unsigned short *)FIO2_MASKB_D +#define pFIO2_MASKB_C (volatile unsigned short *)FIO2_MASKB_C +#define pFIO2_MASKB_S (volatile unsigned short *)FIO2_MASKB_S +#define pFIO2_MASKB_T (volatile unsigned short *)FIO2_MASKB_T +#define pFIO2_DIR (volatile unsigned short *)FIO2_DIR +#define pFIO2_POLAR (volatile unsigned short *)FIO2_POLAR +#define pFIO2_EDGE (volatile unsigned short *)FIO2_EDGE +#define pFIO2_BOTH (volatile unsigned short *)FIO2_BOTH +#define pFIO2_INEN (volatile unsigned short *)FIO2_INEN + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define pSPORT0_TCR1 (volatile unsigned short *)SPORT0_TCR1 +#define pSPORT0_TCR2 (volatile unsigned short *)SPORT0_TCR2 +#define pSPORT0_TCLKDIV (volatile unsigned short *)SPORT0_TCLKDIV +#define pSPORT0_TFSDIV (volatile unsigned short *)SPORT0_TFSDIV +#define pSPORT0_TX (volatile unsigned long *)SPORT0_TX +#define pSPORT0_RX (volatile unsigned long *)SPORT0_RX +#define pSPORT0_TX32 ((volatile long *)SPORT0_TX) +#define pSPORT0_RX32 ((volatile long *)SPORT0_RX) +#define pSPORT0_TX16 ((volatile unsigned short *)SPORT0_TX) +#define pSPORT0_RX16 ((volatile unsigned short *)SPORT0_RX) +#define pSPORT0_RCR1 (volatile unsigned short *)SPORT0_RCR1 +#define pSPORT0_RCR2 (volatile unsigned short *)SPORT0_RCR2 +#define pSPORT0_RCLKDIV (volatile unsigned short *)SPORT0_RCLKDIV +#define pSPORT0_RFSDIV (volatile unsigned short *)SPORT0_RFSDIV +#define pSPORT0_STAT (volatile unsigned short *)SPORT0_STAT +#define pSPORT0_CHNL (volatile unsigned short *)SPORT0_CHNL +#define pSPORT0_MCMC1 (volatile unsigned short *)SPORT0_MCMC1 +#define pSPORT0_MCMC2 (volatile unsigned short *)SPORT0_MCMC2 +#define pSPORT0_MTCS0 (volatile unsigned long *)SPORT0_MTCS0 +#define pSPORT0_MTCS1 (volatile unsigned long *)SPORT0_MTCS1 +#define pSPORT0_MTCS2 (volatile unsigned long *)SPORT0_MTCS2 +#define pSPORT0_MTCS3 (volatile unsigned long *)SPORT0_MTCS3 +#define pSPORT0_MRCS0 (volatile unsigned long *)SPORT0_MRCS0 +#define pSPORT0_MRCS1 (volatile unsigned long *)SPORT0_MRCS1 +#define pSPORT0_MRCS2 (volatile unsigned long *)SPORT0_MRCS2 +#define pSPORT0_MRCS3 (volatile unsigned long *)SPORT0_MRCS3 + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define pSPORT1_TCR1 (volatile unsigned short *)SPORT1_TCR1 +#define pSPORT1_TCR2 (volatile unsigned short *)SPORT1_TCR2 +#define pSPORT1_TCLKDIV (volatile unsigned short *)SPORT1_TCLKDIV +#define pSPORT1_TFSDIV (volatile unsigned short *)SPORT1_TFSDIV +#define pSPORT1_TX (volatile unsigned long *)SPORT1_TX +#define pSPORT1_RX (volatile unsigned long *)SPORT1_RX +#define pSPORT1_TX32 ((volatile long *)SPORT1_TX) +#define pSPORT1_RX32 ((volatile long *)SPORT1_RX) +#define pSPORT1_TX16 ((volatile unsigned short *)SPORT1_TX) +#define pSPORT1_RX16 ((volatile unsigned short *)SPORT1_RX) +#define pSPORT1_RCR1 (volatile unsigned short *)SPORT1_RCR1 +#define pSPORT1_RCR2 (volatile unsigned short *)SPORT1_RCR2 +#define pSPORT1_RCLKDIV (volatile unsigned short *)SPORT1_RCLKDIV +#define pSPORT1_RFSDIV (volatile unsigned short *)SPORT1_RFSDIV +#define pSPORT1_STAT (volatile unsigned short *)SPORT1_STAT +#define pSPORT1_CHNL (volatile unsigned short *)SPORT1_CHNL +#define pSPORT1_MCMC1 (volatile unsigned short *)SPORT1_MCMC1 +#define pSPORT1_MCMC2 (volatile unsigned short *)SPORT1_MCMC2 +#define pSPORT1_MTCS0 (volatile unsigned long *)SPORT1_MTCS0 +#define pSPORT1_MTCS1 (volatile unsigned long *)SPORT1_MTCS1 +#define pSPORT1_MTCS2 (volatile unsigned long *)SPORT1_MTCS2 +#define pSPORT1_MTCS3 (volatile unsigned long *)SPORT1_MTCS3 +#define pSPORT1_MRCS0 (volatile unsigned long *)SPORT1_MRCS0 +#define pSPORT1_MRCS1 (volatile unsigned long *)SPORT1_MRCS1 +#define pSPORT1_MRCS2 (volatile unsigned long *)SPORT1_MRCS2 +#define pSPORT1_MRCS3 (volatile unsigned long *)SPORT1_MRCS3 + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define pEBIU_AMGCTL (volatile unsigned short *)EBIU_AMGCTL +#define pEBIU_AMBCTL0 (volatile unsigned long *)EBIU_AMBCTL0 +#define pEBIU_AMBCTL1 (volatile unsigned long *)EBIU_AMBCTL1 + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define pEBIU_SDGCTL (volatile unsigned long *)EBIU_SDGCTL +#define pEBIU_SDBCTL (volatile unsigned long *)EBIU_SDBCTL +#define pEBIU_SDRRC (volatile unsigned short *)EBIU_SDRRC +#define pEBIU_SDSTAT (volatile unsigned short *)EBIU_SDSTAT + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF)*/ +#define pPPI0_CONTROL (volatile unsigned short *)PPI0_CONTROL +#define pPPI0_STATUS (volatile unsigned short *)PPI0_STATUS +#define pPPI0_COUNT (volatile unsigned short *)PPI0_COUNT +#define pPPI0_DELAY (volatile unsigned short *)PPI0_DELAY +#define pPPI0_FRAME (volatile unsigned short *)PPI0_FRAME + +/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF)*/ +#define pPPI1_CONTROL (volatile unsigned short *)PPI1_CONTROL +#define pPPI1_STATUS (volatile unsigned short *)PPI1_STATUS +#define pPPI1_COUNT (volatile unsigned short *)PPI1_COUNT +#define pPPI1_DELAY (volatile unsigned short *)PPI1_DELAY +#define pPPI1_FRAME (volatile unsigned short *)PPI1_FRAME + +/*DMA Traffic controls*/ +#define pDMA_TCPER ((volatile unsigned short *)DMA_TCPER) +#define pDMA_TCCNT ((volatile unsigned short *)DMA_TCCNT) +#define pDMA_TC_PER ((volatile unsigned short *)DMA_TC_PER) +#define pDMA_TC_CNT ((volatile unsigned short *)DMA_TC_CNT) + +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define pDMA1_0_CONFIG (volatile unsigned short *)DMA1_0_CONFIG +#define pDMA1_0_NEXT_DESC_PTR (volatile void **)DMA1_0_NEXT_DESC_PTR +#define pDMA1_0_START_ADDR (volatile void **)DMA1_0_START_ADDR +#define pDMA1_0_X_COUNT (volatile unsigned short *)DMA1_0_X_COUNT +#define pDMA1_0_Y_COUNT (volatile unsigned short *)DMA1_0_Y_COUNT +#define pDMA1_0_X_MODIFY (volatile unsigned short *)DMA1_0_X_MODIFY +#define pDMA1_0_Y_MODIFY (volatile unsigned short *)DMA1_0_Y_MODIFY +#define pDMA1_0_CURR_DESC_PTR (volatile void **)DMA1_0_CURR_DESC_PTR +#define pDMA1_0_CURR_ADDR (volatile void **)DMA1_0_CURR_ADDR +#define pDMA1_0_CURR_X_COUNT (volatile unsigned short *)DMA1_0_CURR_X_COUNT +#define pDMA1_0_CURR_Y_COUNT (volatile unsigned short *)DMA1_0_CURR_Y_COUNT +#define pDMA1_0_IRQ_STATUS (volatile unsigned short *)DMA1_0_IRQ_STATUS +#define pDMA1_0_PERIPHERAL_MAP (volatile unsigned short *)DMA1_0_PERIPHERAL_MAP +#define pDMA1_1_CONFIG (volatile unsigned short *)DMA1_1_CONFIG +#define pDMA1_1_NEXT_DESC_PTR (volatile void **)DMA1_1_NEXT_DESC_PTR +#define pDMA1_1_START_ADDR (volatile void **)DMA1_1_START_ADDR +#define pDMA1_1_X_COUNT (volatile unsigned short *)DMA1_1_X_COUNT +#define pDMA1_1_Y_COUNT (volatile unsigned short *)DMA1_1_Y_COUNT +#define pDMA1_1_X_MODIFY (volatile unsigned short *)DMA1_1_X_MODIFY +#define pDMA1_1_Y_MODIFY (volatile unsigned short *)DMA1_1_Y_MODIFY +#define pDMA1_1_CURR_DESC_PTR (volatile void **)DMA1_1_CURR_DESC_PTR +#define pDMA1_1_CURR_ADDR (volatile void **)DMA1_1_CURR_ADDR +#define pDMA1_1_CURR_X_COUNT (volatile unsigned short *)DMA1_1_CURR_X_COUNT +#define pDMA1_1_CURR_Y_COUNT (volatile unsigned short *)DMA1_1_CURR_Y_COUNT +#define pDMA1_1_IRQ_STATUS (volatile unsigned short *)DMA1_1_IRQ_STATUS +#define pDMA1_1_PERIPHERAL_MAP (volatile unsigned short *)DMA1_1_PERIPHERAL_MAP +#define pDMA1_2_CONFIG (volatile unsigned short *)DMA1_2_CONFIG +#define pDMA1_2_NEXT_DESC_PTR (volatile void **)DMA1_2_NEXT_DESC_PTR +#define pDMA1_2_START_ADDR (volatile void **)DMA1_2_START_ADDR +#define pDMA1_2_X_COUNT (volatile unsigned short *)DMA1_2_X_COUNT +#define pDMA1_2_Y_COUNT (volatile unsigned short *)DMA1_2_Y_COUNT +#define pDMA1_2_X_MODIFY (volatile unsigned short *)DMA1_2_X_MODIFY +#define pDMA1_2_Y_MODIFY (volatile unsigned short *)DMA1_2_Y_MODIFY +#define pDMA1_2_CURR_DESC_PTR (volatile void **)DMA1_2_CURR_DESC_PTR +#define pDMA1_2_CURR_ADDR (volatile void **)DMA1_2_CURR_ADDR +#define pDMA1_2_CURR_X_COUNT (volatile unsigned short *)DMA1_2_CURR_X_COUNT +#define pDMA1_2_CURR_Y_COUNT (volatile unsigned short *)DMA1_2_CURR_Y_COUNT +#define pDMA1_2_IRQ_STATUS (volatile unsigned short *)DMA1_2_IRQ_STATUS +#define pDMA1_2_PERIPHERAL_MAP (volatile unsigned short *)DMA1_2_PERIPHERAL_MAP +#define pDMA1_3_CONFIG (volatile unsigned short *)DMA1_3_CONFIG +#define pDMA1_3_NEXT_DESC_PTR (volatile void **)DMA1_3_NEXT_DESC_PTR +#define pDMA1_3_START_ADDR (volatile void **)DMA1_3_START_ADDR +#define pDMA1_3_X_COUNT (volatile unsigned short *)DMA1_3_X_COUNT +#define pDMA1_3_Y_COUNT (volatile unsigned short *)DMA1_3_Y_COUNT +#define pDMA1_3_X_MODIFY (volatile unsigned short *)DMA1_3_X_MODIFY +#define pDMA1_3_Y_MODIFY (volatile unsigned short *)DMA1_3_Y_MODIFY +#define pDMA1_3_CURR_DESC_PTR (volatile void **)DMA1_3_CURR_DESC_PTR +#define pDMA1_3_CURR_ADDR (volatile void **)DMA1_3_CURR_ADDR +#define pDMA1_3_CURR_X_COUNT (volatile unsigned short *)DMA1_3_CURR_X_COUNT +#define pDMA1_3_CURR_Y_COUNT (volatile unsigned short *)DMA1_3_CURR_Y_COUNT +#define pDMA1_3_IRQ_STATUS (volatile unsigned short *)DMA1_3_IRQ_STATUS +#define pDMA1_3_PERIPHERAL_MAP (volatile unsigned short *)DMA1_3_PERIPHERAL_MAP +#define pDMA1_4_CONFIG (volatile unsigned short *)DMA1_4_CONFIG +#define pDMA1_4_NEXT_DESC_PTR (volatile void **)DMA1_4_NEXT_DESC_PTR +#define pDMA1_4_START_ADDR (volatile void **)DMA1_4_START_ADDR +#define pDMA1_4_X_COUNT (volatile unsigned short *)DMA1_4_X_COUNT +#define pDMA1_4_Y_COUNT (volatile unsigned short *)DMA1_4_Y_COUNT +#define pDMA1_4_X_MODIFY (volatile unsigned short *)DMA1_4_X_MODIFY +#define pDMA1_4_Y_MODIFY (volatile unsigned short *)DMA1_4_Y_MODIFY +#define pDMA1_4_CURR_DESC_PTR (volatile void **)DMA1_4_CURR_DESC_PTR +#define pDMA1_4_CURR_ADDR (volatile void **)DMA1_4_CURR_ADDR +#define pDMA1_4_CURR_X_COUNT (volatile unsigned short *)DMA1_4_CURR_X_COUNT +#define pDMA1_4_CURR_Y_COUNT (volatile unsigned short *)DMA1_4_CURR_Y_COUNT +#define pDMA1_4_IRQ_STATUS (volatile unsigned short *)DMA1_4_IRQ_STATUS +#define pDMA1_4_PERIPHERAL_MAP (volatile unsigned short *)DMA1_4_PERIPHERAL_MAP +#define pDMA1_5_CONFIG (volatile unsigned short *)DMA1_5_CONFIG +#define pDMA1_5_NEXT_DESC_PTR (volatile void **)DMA1_5_NEXT_DESC_PTR +#define pDMA1_5_START_ADDR (volatile void **)DMA1_5_START_ADDR +#define pDMA1_5_X_COUNT (volatile unsigned short *)DMA1_5_X_COUNT +#define pDMA1_5_Y_COUNT (volatile unsigned short *)DMA1_5_Y_COUNT +#define pDMA1_5_X_MODIFY (volatile unsigned short *)DMA1_5_X_MODIFY +#define pDMA1_5_Y_MODIFY (volatile unsigned short *)DMA1_5_Y_MODIFY +#define pDMA1_5_CURR_DESC_PTR (volatile void **)DMA1_5_CURR_DESC_PTR +#define pDMA1_5_CURR_ADDR (volatile void **)DMA1_5_CURR_ADDR +#define pDMA1_5_CURR_X_COUNT (volatile unsigned short *)DMA1_5_CURR_X_COUNT +#define pDMA1_5_CURR_Y_COUNT (volatile unsigned short *)DMA1_5_CURR_Y_COUNT +#define pDMA1_5_IRQ_STATUS (volatile unsigned short *)DMA1_5_IRQ_STATUS +#define pDMA1_5_PERIPHERAL_MAP (volatile unsigned short *)DMA1_5_PERIPHERAL_MAP +#define pDMA1_6_CONFIG (volatile unsigned short *)DMA1_6_CONFIG +#define pDMA1_6_NEXT_DESC_PTR (volatile void **)DMA1_6_NEXT_DESC_PTR +#define pDMA1_6_START_ADDR (volatile void **)DMA1_6_START_ADDR +#define pDMA1_6_X_COUNT (volatile unsigned short *)DMA1_6_X_COUNT +#define pDMA1_6_Y_COUNT (volatile unsigned short *)DMA1_6_Y_COUNT +#define pDMA1_6_X_MODIFY (volatile unsigned short *)DMA1_6_X_MODIFY +#define pDMA1_6_Y_MODIFY (volatile unsigned short *)DMA1_6_Y_MODIFY +#define pDMA1_6_CURR_DESC_PTR (volatile void **)DMA1_6_CURR_DESC_PTR +#define pDMA1_6_CURR_ADDR (volatile void **)DMA1_6_CURR_ADDR +#define pDMA1_6_CURR_X_COUNT (volatile unsigned short *)DMA1_6_CURR_X_COUNT +#define pDMA1_6_CURR_Y_COUNT (volatile unsigned short *)DMA1_6_CURR_Y_COUNT +#define pDMA1_6_IRQ_STATUS (volatile unsigned short *)DMA1_6_IRQ_STATUS +#define pDMA1_6_PERIPHERAL_MAP (volatile unsigned short *)DMA1_6_PERIPHERAL_MAP +#define pDMA1_7_CONFIG (volatile unsigned short *)DMA1_7_CONFIG +#define pDMA1_7_NEXT_DESC_PTR (volatile void **)DMA1_7_NEXT_DESC_PTR +#define pDMA1_7_START_ADDR (volatile void **)DMA1_7_START_ADDR +#define pDMA1_7_X_COUNT (volatile unsigned short *)DMA1_7_X_COUNT +#define pDMA1_7_Y_COUNT (volatile unsigned short *)DMA1_7_Y_COUNT +#define pDMA1_7_X_MODIFY (volatile unsigned short *)DMA1_7_X_MODIFY +#define pDMA1_7_Y_MODIFY (volatile unsigned short *)DMA1_7_Y_MODIFY +#define pDMA1_7_CURR_DESC_PTR (volatile void **)DMA1_7_CURR_DESC_PTR +#define pDMA1_7_CURR_ADDR (volatile void **)DMA1_7_CURR_ADDR +#define pDMA1_7_CURR_X_COUNT (volatile unsigned short *)DMA1_7_CURR_X_COUNT +#define pDMA1_7_CURR_Y_COUNT (volatile unsigned short *)DMA1_7_CURR_Y_COUNT +#define pDMA1_7_IRQ_STATUS (volatile unsigned short *)DMA1_7_IRQ_STATUS +#define pDMA1_7_PERIPHERAL_MAP (volatile unsigned short *)DMA1_7_PERIPHERAL_MAP +#define pDMA1_8_CONFIG (volatile unsigned short *)DMA1_8_CONFIG +#define pDMA1_8_NEXT_DESC_PTR (volatile void **)DMA1_8_NEXT_DESC_PTR +#define pDMA1_8_START_ADDR (volatile void **)DMA1_8_START_ADDR +#define pDMA1_8_X_COUNT (volatile unsigned short *)DMA1_8_X_COUNT +#define pDMA1_8_Y_COUNT (volatile unsigned short *)DMA1_8_Y_COUNT +#define pDMA1_8_X_MODIFY (volatile unsigned short *)DMA1_8_X_MODIFY +#define pDMA1_8_Y_MODIFY (volatile unsigned short *)DMA1_8_Y_MODIFY +#define pDMA1_8_CURR_DESC_PTR (volatile void **)DMA1_8_CURR_DESC_PTR +#define pDMA1_8_CURR_ADDR (volatile void **)DMA1_8_CURR_ADDR +#define pDMA1_8_CURR_X_COUNT (volatile unsigned short *)DMA1_8_CURR_X_COUNT +#define pDMA1_8_CURR_Y_COUNT (volatile unsigned short *)DMA1_8_CURR_Y_COUNT +#define pDMA1_8_IRQ_STATUS (volatile unsigned short *)DMA1_8_IRQ_STATUS +#define pDMA1_8_PERIPHERAL_MAP (volatile unsigned short *)DMA1_8_PERIPHERAL_MAP +#define pDMA1_9_CONFIG (volatile unsigned short *)DMA1_9_CONFIG +#define pDMA1_9_NEXT_DESC_PTR (volatile void **)DMA1_9_NEXT_DESC_PTR +#define pDMA1_9_START_ADDR (volatile void **)DMA1_9_START_ADDR +#define pDMA1_9_X_COUNT (volatile unsigned short *)DMA1_9_X_COUNT +#define pDMA1_9_Y_COUNT (volatile unsigned short *)DMA1_9_Y_COUNT +#define pDMA1_9_X_MODIFY (volatile unsigned short *)DMA1_9_X_MODIFY +#define pDMA1_9_Y_MODIFY (volatile unsigned short *)DMA1_9_Y_MODIFY +#define pDMA1_9_CURR_DESC_PTR (volatile void **)DMA1_9_CURR_DESC_PTR +#define pDMA1_9_CURR_ADDR (volatile void **)DMA1_9_CURR_ADDR +#define pDMA1_9_CURR_X_COUNT (volatile unsigned short *)DMA1_9_CURR_X_COUNT +#define pDMA1_9_CURR_Y_COUNT (volatile unsigned short *)DMA1_9_CURR_Y_COUNT +#define pDMA1_9_IRQ_STATUS (volatile unsigned short *)DMA1_9_IRQ_STATUS +#define pDMA1_9_PERIPHERAL_MAP (volatile unsigned short *)DMA1_9_PERIPHERAL_MAP +#define pDMA1_10_CONFIG (volatile unsigned short *)DMA1_10_CONFIG +#define pDMA1_10_NEXT_DESC_PTR (volatile void **)DMA1_10_NEXT_DESC_PTR +#define pDMA1_10_START_ADDR (volatile void **)DMA1_10_START_ADDR +#define pDMA1_10_X_COUNT (volatile unsigned short *)DMA1_10_X_COUNT +#define pDMA1_10_Y_COUNT (volatile unsigned short *)DMA1_10_Y_COUNT +#define pDMA1_10_X_MODIFY (volatile unsigned short *)DMA1_10_X_MODIFY +#define pDMA1_10_Y_MODIFY (volatile unsigned short *)DMA1_10_Y_MODIFY +#define pDMA1_10_CURR_DESC_PTR (volatile void **)DMA1_10_CURR_DESC_PTR +#define pDMA1_10_CURR_ADDR (volatile void **)DMA1_10_CURR_ADDR +#define pDMA1_10_CURR_X_COUNT (volatile unsigned short *)DMA1_10_CURR_X_COUNT +#define pDMA1_10_CURR_Y_COUNT (volatile unsigned short *)DMA1_10_CURR_Y_COUNT +#define pDMA1_10_IRQ_STATUS (volatile unsigned short *)DMA1_10_IRQ_STATUS +#define pDMA1_10_PERIPHERAL_MAP (volatile unsigned short *)DMA1_10_PERIPHERAL_MAP +#define pDMA1_11_CONFIG (volatile unsigned short *)DMA1_11_CONFIG +#define pDMA1_11_NEXT_DESC_PTR (volatile void **)DMA1_11_NEXT_DESC_PTR +#define pDMA1_11_START_ADDR (volatile void **)DMA1_11_START_ADDR +#define pDMA1_11_X_COUNT (volatile unsigned short *)DMA1_11_X_COUNT +#define pDMA1_11_Y_COUNT (volatile unsigned short *)DMA1_11_Y_COUNT +#define pDMA1_11_X_MODIFY (volatile signed short *)DMA1_11_X_MODIFY +#define pDMA1_11_Y_MODIFY (volatile signed short *)DMA1_11_Y_MODIFY +#define pDMA1_11_CURR_DESC_PTR (volatile void **)DMA1_11_CURR_DESC_PTR +#define pDMA1_11_CURR_ADDR (volatile void **)DMA1_11_CURR_ADDR +#define pDMA1_11_CURR_X_COUNT (volatile unsigned short *)DMA1_11_CURR_X_COUNT +#define pDMA1_11_CURR_Y_COUNT (volatile unsigned short *)DMA1_11_CURR_Y_COUNT +#define pDMA1_11_IRQ_STATUS (volatile unsigned short *)DMA1_11_IRQ_STATUS +#define pDMA1_11_PERIPHERAL_MAP (volatile unsigned short *)DMA1_11_PERIPHERAL_MAP + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF)*/ +#define pMDMA1_D0_CONFIG (volatile unsigned short *)MDMA1_D0_CONFIG +#define pMDMA1_D0_NEXT_DESC_PTR (volatile void **)MDMA1_D0_NEXT_DESC_PTR +#define pMDMA1_D0_START_ADDR (volatile void **)MDMA1_D0_START_ADDR +#define pMDMA1_D0_X_COUNT (volatile unsigned short *)MDMA1_D0_X_COUNT +#define pMDMA1_D0_Y_COUNT (volatile unsigned short *)MDMA1_D0_Y_COUNT +#define pMDMA1_D0_X_MODIFY (volatile signed short *)MDMA1_D0_X_MODIFY +#define pMDMA1_D0_Y_MODIFY (volatile signed short *)MDMA1_D0_Y_MODIFY +#define pMDMA1_D0_CURR_DESC_PTR (volatile void **)MDMA1_D0_CURR_DESC_PTR +#define pMDMA1_D0_CURR_ADDR (volatile void **)MDMA1_D0_CURR_ADDR +#define pMDMA1_D0_CURR_X_COUNT (volatile unsigned short *)MDMA1_D0_CURR_X_COUNT +#define pMDMA1_D0_CURR_Y_COUNT (volatile unsigned short *)MDMA1_D0_CURR_Y_COUNT +#define pMDMA1_D0_IRQ_STATUS (volatile unsigned short *)MDMA1_D0_IRQ_STATUS +#define pMDMA1_D0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D0_PERIPHERAL_MAP +#define pMDMA1_S0_CONFIG (volatile unsigned short *)MDMA1_S0_CONFIG +#define pMDMA1_S0_NEXT_DESC_PTR (volatile void **)MDMA1_S0_NEXT_DESC_PTR +#define pMDMA1_S0_START_ADDR (volatile void **)MDMA1_S0_START_ADDR +#define pMDMA1_S0_X_COUNT (volatile unsigned short *)MDMA1_S0_X_COUNT +#define pMDMA1_S0_Y_COUNT (volatile unsigned short *)MDMA1_S0_Y_COUNT +#define pMDMA1_S0_X_MODIFY (volatile signed short *)MDMA1_S0_X_MODIFY +#define pMDMA1_S0_Y_MODIFY (volatile signed short *)MDMA1_S0_Y_MODIFY +#define pMDMA1_S0_CURR_DESC_PTR (volatile void **)MDMA1_S0_CURR_DESC_PTR +#define pMDMA1_S0_CURR_ADDR (volatile void **)MDMA1_S0_CURR_ADDR +#define pMDMA1_S0_CURR_X_COUNT (volatile unsigned short *)MDMA1_S0_CURR_X_COUNT +#define pMDMA1_S0_CURR_Y_COUNT (volatile unsigned short *)MDMA1_S0_CURR_Y_COUNT +#define pMDMA1_S0_IRQ_STATUS (volatile unsigned short *)MDMA1_S0_IRQ_STATUS +#define pMDMA1_S0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S0_PERIPHERAL_MAP +#define pMDMA1_D1_CONFIG (volatile unsigned short *)MDMA1_D1_CONFIG +#define pMDMA1_D1_NEXT_DESC_PTR (volatile void **)MDMA1_D1_NEXT_DESC_PTR +#define pMDMA1_D1_START_ADDR (volatile void **)MDMA1_D1_START_ADDR +#define pMDMA1_D1_X_COUNT (volatile unsigned short *)MDMA1_D1_X_COUNT +#define pMDMA1_D1_Y_COUNT (volatile unsigned short *)MDMA1_D1_Y_COUNT +#define pMDMA1_D1_X_MODIFY (volatile signed short *)MDMA1_D1_X_MODIFY +#define pMDMA1_D1_Y_MODIFY (volatile signed short *)MDMA1_D1_Y_MODIFY +#define pMDMA1_D1_CURR_DESC_PTR (volatile void **)MDMA1_D1_CURR_DESC_PTR +#define pMDMA1_D1_CURR_ADDR (volatile void **)MDMA1_D1_CURR_ADDR +#define pMDMA1_D1_CURR_X_COUNT (volatile unsigned short *)MDMA1_D1_CURR_X_COUNT +#define pMDMA1_D1_CURR_Y_COUNT (volatile unsigned short *)MDMA1_D1_CURR_Y_COUNT +#define pMDMA1_D1_IRQ_STATUS (volatile unsigned short *)MDMA1_D1_IRQ_STATUS +#define pMDMA1_D1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D1_PERIPHERAL_MAP +#define pMDMA1_S1_CONFIG (volatile unsigned short *)MDMA1_S1_CONFIG +#define pMDMA1_S1_NEXT_DESC_PTR (volatile void **)MDMA1_S1_NEXT_DESC_PTR +#define pMDMA1_S1_START_ADDR (volatile void **)MDMA1_S1_START_ADDR +#define pMDMA1_S1_X_COUNT (volatile unsigned short *)MDMA1_S1_X_COUNT +#define pMDMA1_S1_Y_COUNT (volatile unsigned short *)MDMA1_S1_Y_COUNT +#define pMDMA1_S1_X_MODIFY (volatile signed short *)MDMA1_S1_X_MODIFY +#define pMDMA1_S1_Y_MODIFY (volatile signed short *)MDMA1_S1_Y_MODIFY +#define pMDMA1_S1_CURR_DESC_PTR (volatile void **)MDMA1_S1_CURR_DESC_PTR +#define pMDMA1_S1_CURR_ADDR (volatile void **)MDMA1_S1_CURR_ADDR +#define pMDMA1_S1_CURR_X_COUNT (volatile unsigned short *)MDMA1_S1_CURR_X_COUNT +#define pMDMA1_S1_CURR_Y_COUNT (volatile unsigned short *)MDMA1_S1_CURR_Y_COUNT +#define pMDMA1_S1_IRQ_STATUS (volatile unsigned short *)MDMA1_S1_IRQ_STATUS +#define pMDMA1_S1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S1_PERIPHERAL_MAP + +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define pDMA2_0_CONFIG (volatile unsigned short *)DMA2_0_CONFIG +#define pDMA2_0_NEXT_DESC_PTR (volatile void **)DMA2_0_NEXT_DESC_PTR +#define pDMA2_0_START_ADDR (volatile void **)DMA2_0_START_ADDR +#define pDMA2_0_X_COUNT (volatile unsigned short *)DMA2_0_X_COUNT +#define pDMA2_0_Y_COUNT (volatile unsigned short *)DMA2_0_Y_COUNT +#define pDMA2_0_X_MODIFY (volatile signed short *)DMA2_0_X_MODIFY +#define pDMA2_0_Y_MODIFY (volatile signed short *)DMA2_0_Y_MODIFY +#define pDMA2_0_CURR_DESC_PTR (volatile void **)DMA2_0_CURR_DESC_PTR +#define pDMA2_0_CURR_ADDR (volatile void **)DMA2_0_CURR_ADDR +#define pDMA2_0_CURR_X_COUNT (volatile unsigned short *)DMA2_0_CURR_X_COUNT +#define pDMA2_0_CURR_Y_COUNT (volatile unsigned short *)DMA2_0_CURR_Y_COUNT +#define pDMA2_0_IRQ_STATUS (volatile unsigned short *)DMA2_0_IRQ_STATUS +#define pDMA2_0_PERIPHERAL_MAP (volatile unsigned short *)DMA2_0_PERIPHERAL_MAP +#define pDMA2_1_CONFIG (volatile unsigned short *)DMA2_1_CONFIG +#define pDMA2_1_NEXT_DESC_PTR (volatile void **)DMA2_1_NEXT_DESC_PTR +#define pDMA2_1_START_ADDR (volatile void **)DMA2_1_START_ADDR +#define pDMA2_1_X_COUNT (volatile unsigned short *)DMA2_1_X_COUNT +#define pDMA2_1_Y_COUNT (volatile unsigned short *)DMA2_1_Y_COUNT +#define pDMA2_1_X_MODIFY (volatile signed short *)DMA2_1_X_MODIFY +#define pDMA2_1_Y_MODIFY (volatile signed short *)DMA2_1_Y_MODIFY +#define pDMA2_1_CURR_DESC_PTR (volatile void **)DMA2_1_CURR_DESC_PTR +#define pDMA2_1_CURR_ADDR (volatile void **)DMA2_1_CURR_ADDR +#define pDMA2_1_CURR_X_COUNT (volatile unsigned short *)DMA2_1_CURR_X_COUNT +#define pDMA2_1_CURR_Y_COUNT (volatile unsigned short *)DMA2_1_CURR_Y_COUNT +#define pDMA2_1_IRQ_STATUS (volatile unsigned short *)DMA2_1_IRQ_STATUS +#define pDMA2_1_PERIPHERAL_MAP (volatile unsigned short *)DMA2_1_PERIPHERAL_MAP +#define pDMA2_2_CONFIG (volatile unsigned short *)DMA2_2_CONFIG +#define pDMA2_2_NEXT_DESC_PTR (volatile void **)DMA2_2_NEXT_DESC_PTR +#define pDMA2_2_START_ADDR (volatile void **)DMA2_2_START_ADDR +#define pDMA2_2_X_COUNT (volatile unsigned short *)DMA2_2_X_COUNT +#define pDMA2_2_Y_COUNT (volatile unsigned short *)DMA2_2_Y_COUNT +#define pDMA2_2_X_MODIFY (volatile signed short *)DMA2_2_X_MODIFY +#define pDMA2_2_Y_MODIFY (volatile signed short *)DMA2_2_Y_MODIFY +#define pDMA2_2_CURR_DESC_PTR (volatile void **)DMA2_2_CURR_DESC_PTR +#define pDMA2_2_CURR_ADDR (volatile void **)DMA2_2_CURR_ADDR +#define pDMA2_2_CURR_X_COUNT (volatile unsigned short *)DMA2_2_CURR_X_COUNT +#define pDMA2_2_CURR_Y_COUNT (volatile unsigned short *)DMA2_2_CURR_Y_COUNT +#define pDMA2_2_IRQ_STATUS (volatile unsigned short *)DMA2_2_IRQ_STATUS +#define pDMA2_2_PERIPHERAL_MAP (volatile unsigned short *)DMA2_2_PERIPHERAL_MAP +#define pDMA2_3_CONFIG (volatile unsigned short *)DMA2_3_CONFIG +#define pDMA2_3_NEXT_DESC_PTR (volatile void **)DMA2_3_NEXT_DESC_PTR +#define pDMA2_3_START_ADDR (volatile void **)DMA2_3_START_ADDR +#define pDMA2_3_X_COUNT (volatile unsigned short *)DMA2_3_X_COUNT +#define pDMA2_3_Y_COUNT (volatile unsigned short *)DMA2_3_Y_COUNT +#define pDMA2_3_X_MODIFY (volatile signed short *)DMA2_3_X_MODIFY +#define pDMA2_3_Y_MODIFY (volatile signed short *)DMA2_3_Y_MODIFY +#define pDMA2_3_CURR_DESC_PTR (volatile void **)DMA2_3_CURR_DESC_PTR +#define pDMA2_3_CURR_ADDR (volatile void **)DMA2_3_CURR_ADDR +#define pDMA2_3_CURR_X_COUNT (volatile unsigned short *)DMA2_3_CURR_X_COUNT +#define pDMA2_3_CURR_Y_COUNT (volatile unsigned short *)DMA2_3_CURR_Y_COUNT +#define pDMA2_3_IRQ_STATUS (volatile unsigned short *)DMA2_3_IRQ_STATUS +#define pDMA2_3_PERIPHERAL_MAP (volatile unsigned short *)DMA2_3_PERIPHERAL_MAP +#define pDMA2_4_CONFIG (volatile unsigned short *)DMA2_4_CONFIG +#define pDMA2_4_NEXT_DESC_PTR (volatile void **)DMA2_4_NEXT_DESC_PTR +#define pDMA2_4_START_ADDR (volatile void **)DMA2_4_START_ADDR +#define pDMA2_4_X_COUNT (volatile unsigned short *)DMA2_4_X_COUNT +#define pDMA2_4_Y_COUNT (volatile unsigned short *)DMA2_4_Y_COUNT +#define pDMA2_4_X_MODIFY (volatile signed short *)DMA2_4_X_MODIFY +#define pDMA2_4_Y_MODIFY (volatile signed short *)DMA2_4_Y_MODIFY +#define pDMA2_4_CURR_DESC_PTR (volatile void **)DMA2_4_CURR_DESC_PTR +#define pDMA2_4_CURR_ADDR (volatile void **)DMA2_4_CURR_ADDR +#define pDMA2_4_CURR_X_COUNT (volatile unsigned short *)DMA2_4_CURR_X_COUNT +#define pDMA2_4_CURR_Y_COUNT (volatile unsigned short *)DMA2_4_CURR_Y_COUNT +#define pDMA2_4_IRQ_STATUS (volatile unsigned short *)DMA2_4_IRQ_STATUS +#define pDMA2_4_PERIPHERAL_MAP (volatile unsigned short *)DMA2_4_PERIPHERAL_MAP +#define pDMA2_5_CONFIG (volatile unsigned short *)DMA2_5_CONFIG +#define pDMA2_5_NEXT_DESC_PTR (volatile void **)DMA2_5_NEXT_DESC_PTR +#define pDMA2_5_START_ADDR (volatile void **)DMA2_5_START_ADDR +#define pDMA2_5_X_COUNT (volatile unsigned short *)DMA2_5_X_COUNT +#define pDMA2_5_Y_COUNT (volatile unsigned short *)DMA2_5_Y_COUNT +#define pDMA2_5_X_MODIFY (volatile signed short *)DMA2_5_X_MODIFY +#define pDMA2_5_Y_MODIFY (volatile signed short *)DMA2_5_Y_MODIFY +#define pDMA2_5_CURR_DESC_PTR (volatile void **)DMA2_5_CURR_DESC_PTR +#define pDMA2_5_CURR_ADDR (volatile void **)DMA2_5_CURR_ADDR +#define pDMA2_5_CURR_X_COUNT (volatile unsigned short *)DMA2_5_CURR_X_COUNT +#define pDMA2_5_CURR_Y_COUNT (volatile unsigned short *)DMA2_5_CURR_Y_COUNT +#define pDMA2_5_IRQ_STATUS (volatile unsigned short *)DMA2_5_IRQ_STATUS +#define pDMA2_5_PERIPHERAL_MAP (volatile unsigned short *)DMA2_5_PERIPHERAL_MAP +#define pDMA2_6_CONFIG (volatile unsigned short *)DMA2_6_CONFIG +#define pDMA2_6_NEXT_DESC_PTR (volatile void **)DMA2_6_NEXT_DESC_PTR +#define pDMA2_6_START_ADDR (volatile void **)DMA2_6_START_ADDR +#define pDMA2_6_X_COUNT (volatile unsigned short *)DMA2_6_X_COUNT +#define pDMA2_6_Y_COUNT (volatile unsigned short *)DMA2_6_Y_COUNT +#define pDMA2_6_X_MODIFY (volatile signed short *)DMA2_6_X_MODIFY +#define pDMA2_6_Y_MODIFY (volatile signed short *)DMA2_6_Y_MODIFY +#define pDMA2_6_CURR_DESC_PTR (volatile void **)DMA2_6_CURR_DESC_PTR +#define pDMA2_6_CURR_ADDR (volatile void **)DMA2_6_CURR_ADDR +#define pDMA2_6_CURR_X_COUNT (volatile unsigned short *)DMA2_6_CURR_X_COUNT +#define pDMA2_6_CURR_Y_COUNT (volatile unsigned short *)DMA2_6_CURR_Y_COUNT +#define pDMA2_6_IRQ_STATUS (volatile unsigned short *)DMA2_6_IRQ_STATUS +#define pDMA2_6_PERIPHERAL_MAP (volatile unsigned short *)DMA2_6_PERIPHERAL_MAP +#define pDMA2_7_CONFIG (volatile unsigned short *)DMA2_7_CONFIG +#define pDMA2_7_NEXT_DESC_PTR (volatile void **)DMA2_7_NEXT_DESC_PTR +#define pDMA2_7_START_ADDR (volatile void **)DMA2_7_START_ADDR +#define pDMA2_7_X_COUNT (volatile unsigned short *)DMA2_7_X_COUNT +#define pDMA2_7_Y_COUNT (volatile unsigned short *)DMA2_7_Y_COUNT +#define pDMA2_7_X_MODIFY (volatile signed short *)DMA2_7_X_MODIFY +#define pDMA2_7_Y_MODIFY (volatile signed short *)DMA2_7_Y_MODIFY +#define pDMA2_7_CURR_DESC_PTR (volatile void **)DMA2_7_CURR_DESC_PTR +#define pDMA2_7_CURR_ADDR (volatile void **)DMA2_7_CURR_ADDR +#define pDMA2_7_CURR_X_COUNT (volatile unsigned short *)DMA2_7_CURR_X_COUNT +#define pDMA2_7_CURR_Y_COUNT (volatile unsigned short *)DMA2_7_CURR_Y_COUNT +#define pDMA2_7_IRQ_STATUS (volatile unsigned short *)DMA2_7_IRQ_STATUS +#define pDMA2_7_PERIPHERAL_MAP (volatile unsigned short *)DMA2_7_PERIPHERAL_MAP +#define pDMA2_8_CONFIG (volatile unsigned short *)DMA2_8_CONFIG +#define pDMA2_8_NEXT_DESC_PTR (volatile void **)DMA2_8_NEXT_DESC_PTR +#define pDMA2_8_START_ADDR (volatile void **)DMA2_8_START_ADDR +#define pDMA2_8_X_COUNT (volatile unsigned short *)DMA2_8_X_COUNT +#define pDMA2_8_Y_COUNT (volatile unsigned short *)DMA2_8_Y_COUNT +#define pDMA2_8_X_MODIFY (volatile signed short *)DMA2_8_X_MODIFY +#define pDMA2_8_Y_MODIFY (volatile signed short *)DMA2_8_Y_MODIFY +#define pDMA2_8_CURR_DESC_PTR (volatile void **)DMA2_8_CURR_DESC_PTR +#define pDMA2_8_CURR_ADDR (volatile void **)DMA2_8_CURR_ADDR +#define pDMA2_8_CURR_X_COUNT (volatile unsigned short *)DMA2_8_CURR_X_COUNT +#define pDMA2_8_CURR_Y_COUNT (volatile unsigned short *)DMA2_8_CURR_Y_COUNT +#define pDMA2_8_IRQ_STATUS (volatile unsigned short *)DMA2_8_IRQ_STATUS +#define pDMA2_8_PERIPHERAL_MAP (volatile unsigned short *)DMA2_8_PERIPHERAL_MAP +#define pDMA2_9_CONFIG (volatile unsigned short *)DMA2_9_CONFIG +#define pDMA2_9_NEXT_DESC_PTR (volatile void **)DMA2_9_NEXT_DESC_PTR +#define pDMA2_9_START_ADDR (volatile void **)DMA2_9_START_ADDR +#define pDMA2_9_X_COUNT (volatile unsigned short *)DMA2_9_X_COUNT +#define pDMA2_9_Y_COUNT (volatile unsigned short *)DMA2_9_Y_COUNT +#define pDMA2_9_X_MODIFY (volatile signed short *)DMA2_9_X_MODIFY +#define pDMA2_9_Y_MODIFY (volatile signed short *)DMA2_9_Y_MODIFY +#define pDMA2_9_CURR_DESC_PTR (volatile void **)DMA2_9_CURR_DESC_PTR +#define pDMA2_9_CURR_ADDR (volatile void **)DMA2_9_CURR_ADDR +#define pDMA2_9_CURR_X_COUNT (volatile unsigned short *)DMA2_9_CURR_X_COUNT +#define pDMA2_9_CURR_Y_COUNT (volatile unsigned short *)DMA2_9_CURR_Y_COUNT +#define pDMA2_9_IRQ_STATUS (volatile unsigned short *)DMA2_9_IRQ_STATUS +#define pDMA2_9_PERIPHERAL_MAP (volatile unsigned short *)DMA2_9_PERIPHERAL_MAP +#define pDMA2_10_CONFIG (volatile unsigned short *)DMA2_10_CONFIG +#define pDMA2_10_NEXT_DESC_PTR (volatile void **)DMA2_10_NEXT_DESC_PTR +#define pDMA2_10_START_ADDR (volatile void **)DMA2_10_START_ADDR +#define pDMA2_10_X_COUNT (volatile unsigned short *)DMA2_10_X_COUNT +#define pDMA2_10_Y_COUNT (volatile unsigned short *)DMA2_10_Y_COUNT +#define pDMA2_10_X_MODIFY (volatile signed short *)DMA2_10_X_MODIFY +#define pDMA2_10_Y_MODIFY (volatile signed short *)DMA2_10_Y_MODIFY +#define pDMA2_10_CURR_DESC_PTR (volatile void **)DMA2_10_CURR_DESC_PTR +#define pDMA2_10_CURR_ADDR (volatile void **)DMA2_10_CURR_ADDR +#define pDMA2_10_CURR_X_COUNT (volatile unsigned short *)DMA2_10_CURR_X_COUNT +#define pDMA2_10_CURR_Y_COUNT (volatile unsigned short *)DMA2_10_CURR_Y_COUNT +#define pDMA2_10_IRQ_STATUS (volatile unsigned short *)DMA2_10_IRQ_STATUS +#define pDMA2_10_PERIPHERAL_MAP (volatile unsigned short *)DMA2_10_PERIPHERAL_MAP +#define pDMA2_11_CONFIG (volatile unsigned short *)DMA2_11_CONFIG +#define pDMA2_11_NEXT_DESC_PTR (volatile void **)DMA2_11_NEXT_DESC_PTR +#define pDMA2_11_START_ADDR (volatile void **)DMA2_11_START_ADDR +#define pDMA2_11_X_COUNT (volatile unsigned short *)DMA2_11_X_COUNT +#define pDMA2_11_Y_COUNT (volatile unsigned short *)DMA2_11_Y_COUNT +#define pDMA2_11_X_MODIFY (volatile signed short *)DMA2_11_X_MODIFY +#define pDMA2_11_Y_MODIFY (volatile signed short *)DMA2_11_Y_MODIFY +#define pDMA2_11_CURR_DESC_PTR (volatile void **)DMA2_11_CURR_DESC_PTR +#define pDMA2_11_CURR_ADDR (volatile void **)DMA2_11_CURR_ADDR +#define pDMA2_11_CURR_X_COUNT (volatile unsigned short *)DMA2_11_CURR_X_COUNT +#define pDMA2_11_CURR_Y_COUNT (volatile unsigned short *)DMA2_11_CURR_Y_COUNT +#define pDMA2_11_IRQ_STATUS (volatile unsigned short *)DMA2_11_IRQ_STATUS +#define pDMA2_11_PERIPHERAL_MAP (volatile unsigned short *)DMA2_11_PERIPHERAL_MAP + +/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */ +#define pMDMA2_D0_CONFIG (volatile unsigned short *)MDMA2_D0_CONFIG +#define pMDMA2_D0_NEXT_DESC_PTR (volatile void **)MDMA2_D0_NEXT_DESC_PTR +#define pMDMA2_D0_START_ADDR (volatile void **)MDMA2_D0_START_ADDR +#define pMDMA2_D0_X_COUNT (volatile unsigned short *)MDMA2_D0_X_COUNT +#define pMDMA2_D0_Y_COUNT (volatile unsigned short *)MDMA2_D0_Y_COUNT +#define pMDMA2_D0_X_MODIFY (volatile signed short *)MDMA2_D0_X_MODIFY +#define pMDMA2_D0_Y_MODIFY (volatile signed short *)MDMA2_D0_Y_MODIFY +#define pMDMA2_D0_CURR_DESC_PTR (volatile void **)MDMA2_D0_CURR_DESC_PTR +#define pMDMA2_D0_CURR_ADDR (volatile void **)MDMA2_D0_CURR_ADDR +#define pMDMA2_D0_CURR_X_COUNT (volatile unsigned short *)MDMA2_D0_CURR_X_COUNT +#define pMDMA2_D0_CURR_Y_COUNT (volatile unsigned short *)MDMA2_D0_CURR_Y_COUNT +#define pMDMA2_D0_IRQ_STATUS (volatile unsigned short *)MDMA2_D0_IRQ_STATUS +#define pMDMA2_D0_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_D0_PERIPHERAL_MAP +#define pMDMA2_S0_CONFIG (volatile unsigned short *)MDMA2_S0_CONFIG +#define pMDMA2_S0_NEXT_DESC_PTR (volatile void **)MDMA2_S0_NEXT_DESC_PTR +#define pMDMA2_S0_START_ADDR (volatile void **)MDMA2_S0_START_ADDR +#define pMDMA2_S0_X_COUNT (volatile unsigned short *)MDMA2_S0_X_COUNT +#define pMDMA2_S0_Y_COUNT (volatile unsigned short *)MDMA2_S0_Y_COUNT +#define pMDMA2_S0_X_MODIFY (volatile signed short *)MDMA2_S0_X_MODIFY +#define pMDMA2_S0_Y_MODIFY (volatile signed short *)MDMA2_S0_Y_MODIFY +#define pMDMA2_S0_CURR_DESC_PTR (volatile void **)MDMA2_S0_CURR_DESC_PTR +#define pMDMA2_S0_CURR_ADDR (volatile void **)MDMA2_S0_CURR_ADDR +#define pMDMA2_S0_CURR_X_COUNT (volatile unsigned short *)MDMA2_S0_CURR_X_COUNT +#define pMDMA2_S0_CURR_Y_COUNT (volatile unsigned short *)MDMA2_S0_CURR_Y_COUNT +#define pMDMA2_S0_IRQ_STATUS (volatile unsigned short *)MDMA2_S0_IRQ_STATUS +#define pMDMA2_S0_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_S0_PERIPHERAL_MAP +#define pMDMA2_D1_CONFIG (volatile unsigned short *)MDMA2_D1_CONFIG +#define pMDMA2_D1_NEXT_DESC_PTR (volatile void **)MDMA2_D1_NEXT_DESC_PTR +#define pMDMA2_D1_START_ADDR (volatile void **)MDMA2_D1_START_ADDR +#define pMDMA2_D1_X_COUNT (volatile unsigned short *)MDMA2_D1_X_COUNT +#define pMDMA2_D1_Y_COUNT (volatile unsigned short *)MDMA2_D1_Y_COUNT +#define pMDMA2_D1_X_MODIFY (volatile signed short *)MDMA2_D1_X_MODIFY +#define pMDMA2_D1_Y_MODIFY (volatile signed short *)MDMA2_D1_Y_MODIFY +#define pMDMA2_D1_CURR_DESC_PTR (volatile void **)MDMA2_D1_CURR_DESC_PTR +#define pMDMA2_D1_CURR_ADDR (volatile void **)MDMA2_D1_CURR_ADDR +#define pMDMA2_D1_CURR_X_COUNT (volatile unsigned short *)MDMA2_D1_CURR_X_COUNT +#define pMDMA2_D1_CURR_Y_COUNT (volatile unsigned short *)MDMA2_D1_CURR_Y_COUNT +#define pMDMA2_D1_IRQ_STATUS (volatile unsigned short *)MDMA2_D1_IRQ_STATUS +#define pMDMA2_D1_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_D1_PERIPHERAL_MAP +#define pMDMA2_S1_CONFIG (volatile unsigned short *)MDMA2_S1_CONFIG +#define pMDMA2_S1_NEXT_DESC_PTR (volatile void **)MDMA2_S1_NEXT_DESC_PTR +#define pMDMA2_S1_START_ADDR (volatile void **)MDMA2_S1_START_ADDR +#define pMDMA2_S1_X_COUNT (volatile unsigned short *)MDMA2_S1_X_COUNT +#define pMDMA2_S1_Y_COUNT (volatile unsigned short *)MDMA2_S1_Y_COUNT +#define pMDMA2_S1_X_MODIFY (volatile signed short *)MDMA2_S1_X_MODIFY +#define pMDMA2_S1_Y_MODIFY (volatile signed short *)MDMA2_S1_Y_MODIFY +#define pMDMA2_S1_CURR_DESC_PTR (volatile void **)MDMA2_S1_CURR_DESC_PTR +#define pMDMA2_S1_CURR_ADDR (volatile void **)MDMA2_S1_CURR_ADDR +#define pMDMA2_S1_CURR_X_COUNT (volatile unsigned short *)MDMA2_S1_CURR_X_COUNT +#define pMDMA2_S1_CURR_Y_COUNT (volatile unsigned short *)MDMA2_S1_CURR_Y_COUNT +#define pMDMA2_S1_IRQ_STATUS (volatile unsigned short *)MDMA2_S1_IRQ_STATUS +#define pMDMA2_S1_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_S1_PERIPHERAL_MAP + +/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ +#define pIMDMA_D0_CONFIG (volatile unsigned short *)IMDMA_D0_CONFIG +#define pIMDMA_D0_NEXT_DESC_PTR (volatile void **)IMDMA_D0_NEXT_DESC_PTR +#define pIMDMA_D0_START_ADDR (volatile void **)IMDMA_D0_START_ADDR +#define pIMDMA_D0_X_COUNT (volatile unsigned short *)IMDMA_D0_X_COUNT +#define pIMDMA_D0_Y_COUNT (volatile unsigned short *)IMDMA_D0_Y_COUNT +#define pIMDMA_D0_X_MODIFY (volatile signed short *)IMDMA_D0_X_MODIFY +#define pIMDMA_D0_Y_MODIFY (volatile signed short *)IMDMA_D0_Y_MODIFY +#define pIMDMA_D0_CURR_DESC_PTR (volatile void **)IMDMA_D0_CURR_DESC_PTR +#define pIMDMA_D0_CURR_ADDR (volatile void **)IMDMA_D0_CURR_ADDR +#define pIMDMA_D0_CURR_X_COUNT (volatile unsigned short *)IMDMA_D0_CURR_X_COUNT +#define pIMDMA_D0_CURR_Y_COUNT (volatile unsigned short *)IMDMA_D0_CURR_Y_COUNT +#define pIMDMA_D0_IRQ_STATUS (volatile unsigned short *)IMDMA_D0_IRQ_STATUS +#define pIMDMA_S0_CONFIG (volatile unsigned short *)IMDMA_S0_CONFIG +#define pIMDMA_S0_NEXT_DESC_PTR (volatile void **)IMDMA_S0_NEXT_DESC_PTR +#define pIMDMA_S0_START_ADDR (volatile void **)IMDMA_S0_START_ADDR +#define pIMDMA_S0_X_COUNT (volatile unsigned short *)IMDMA_S0_X_COUNT +#define pIMDMA_S0_Y_COUNT (volatile unsigned short *)IMDMA_S0_Y_COUNT +#define pIMDMA_S0_X_MODIFY (volatile signed short *)IMDMA_S0_X_MODIFY +#define pIMDMA_S0_Y_MODIFY (volatile signed short *)IMDMA_S0_Y_MODIFY +#define pIMDMA_S0_CURR_DESC_PTR (volatile void **)IMDMA_S0_CURR_DESC_PTR +#define pIMDMA_S0_CURR_ADDR (volatile void **)IMDMA_S0_CURR_ADDR +#define pIMDMA_S0_CURR_X_COUNT (volatile unsigned short *)IMDMA_S0_CURR_X_COUNT +#define pIMDMA_S0_CURR_Y_COUNT (volatile unsigned short *)IMDMA_S0_CURR_Y_COUNT +#define pIMDMA_S0_IRQ_STATUS (volatile unsigned short *)IMDMA_S0_IRQ_STATUS +#define pIMDMA_D1_CONFIG (volatile unsigned short *)IMDMA_D1_CONFIG +#define pIMDMA_D1_NEXT_DESC_PTR (volatile void **)IMDMA_D1_NEXT_DESC_PTR +#define pIMDMA_D1_START_ADDR (volatile void **)IMDMA_D1_START_ADDR +#define pIMDMA_D1_X_COUNT (volatile unsigned short *)IMDMA_D1_X_COUNT +#define pIMDMA_D1_Y_COUNT (volatile unsigned short *)IMDMA_D1_Y_COUNT +#define pIMDMA_D1_X_MODIFY (volatile signed short *)IMDMA_D1_X_MODIFY +#define pIMDMA_D1_Y_MODIFY (volatile signed short *)IMDMA_D1_Y_MODIFY +#define pIMDMA_D1_CURR_DESC_PTR (volatile void **)IMDMA_D1_CURR_DESC_PTR +#define pIMDMA_D1_CURR_ADDR (volatile void **)IMDMA_D1_CURR_ADDR +#define pIMDMA_D1_CURR_X_COUNT (volatile unsigned short *)IMDMA_D1_CURR_X_COUNT +#define pIMDMA_D1_CURR_Y_COUNT (volatile unsigned short *)IMDMA_D1_CURR_Y_COUNT +#define pIMDMA_D1_IRQ_STATUS (volatile unsigned short *)IMDMA_D1_IRQ_STATUS +#define pIMDMA_S1_CONFIG (volatile unsigned short *)IMDMA_S1_CONFIG +#define pIMDMA_S1_NEXT_DESC_PTR (volatile void **)IMDMA_S1_NEXT_DESC_PTR +#define pIMDMA_S1_START_ADDR (volatile void **)IMDMA_S1_START_ADDR +#define pIMDMA_S1_X_COUNT (volatile unsigned short *)IMDMA_S1_X_COUNT +#define pIMDMA_S1_Y_COUNT (volatile unsigned short *)IMDMA_S1_Y_COUNT +#define pIMDMA_S1_X_MODIFY (volatile signed short *)IMDMA_S1_X_MODIFY +#define pIMDMA_S1_Y_MODIFY (volatile signed short *)IMDMA_S1_Y_MODIFY +#define pIMDMA_S1_CURR_DESC_PTR (volatile void **)IMDMA_S1_CURR_DESC_PTR +#define pIMDMA_S1_CURR_ADDR (volatile void **)IMDMA_S1_CURR_ADDR +#define pIMDMA_S1_CURR_X_COUNT (volatile unsigned short *)IMDMA_S1_CURR_X_COUNT +#define pIMDMA_S1_CURR_Y_COUNT (volatile unsigned short *)IMDMA_S1_CURR_Y_COUNT +#define pIMDMA_S1_IRQ_STATUS (volatile unsigned short *)IMDMA_S1_IRQ_STATUS + +/* + * System Reset and Interrupt Controller registers for + * core A (0xFFC0 0100-0xFFC0 01FF) + */ +#define pSWRST (volatile unsigned short *)SICA_SWRST +#define pSYSCR (volatile unsigned short *)SICA_SYSCR +#define pRVECT (volatile unsigned short *)SICA_RVECT +#define pSIC_SWRST (volatile unsigned short *)SICA_SWRST +#define pSIC_SYSCR (volatile unsigned short *)SICA_SYSCR +#define pSIC_RVECT (volatile unsigned short *)SICA_RVECT +#define pSIC_IMASK (volatile unsigned long *)SICA_IMASK +#define pSIC_IAR0 ((volatile unsigned long *)SICA_IAR0) +#define pSIC_IAR1 (volatile unsigned long *)SICA_IAR1 +#define pSIC_IAR2 (volatile unsigned long *)SICA_IAR2 +#define pSIC_ISR (volatile unsigned long *)SICA_ISR0 +#define pSIC_IWR (volatile unsigned long *)SICA_IWR0 + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define pWDOG_CTL (volatile unsigned short *)WDOGA_CTL +#define pWDOG_CNT (volatile unsigned long *)WDOGA_CNT +#define pWDOG_STAT (volatile unsigned long *)WDOGA_STAT + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define pFIO_FLAG_D (volatile unsigned short *)FIO0_FLAG_D +#define pFIO_FLAG_C (volatile unsigned short *)FIO0_FLAG_C +#define pFIO_FLAG_S (volatile unsigned short *)FIO0_FLAG_S +#define pFIO_FLAG_T (volatile unsigned short *)FIO0_FLAG_T +#define pFIO_MASKA_D (volatile unsigned short *)FIO0_MASKA_D +#define pFIO_MASKA_C (volatile unsigned short *)FIO0_MASKA_C +#define pFIO_MASKA_S (volatile unsigned short *)FIO0_MASKA_S +#define pFIO_MASKA_T (volatile unsigned short *)FIO0_MASKA_T +#define pFIO_MASKB_D (volatile unsigned short *)FIO0_MASKB_D +#define pFIO_MASKB_C (volatile unsigned short *)FIO0_MASKB_C +#define pFIO_MASKB_S (volatile unsigned short *)FIO0_MASKB_S +#define pFIO_MASKB_T (volatile unsigned short *)FIO0_MASKB_T +#define pFIO_DIR (volatile unsigned short *)FIO0_DIR +#define pFIO_POLAR (volatile unsigned short *)FIO0_POLAR +#define pFIO_EDGE (volatile unsigned short *)FIO0_EDGE +#define pFIO_BOTH (volatile unsigned short *)FIO0_BOTH +#define pFIO_INEN (volatile unsigned short *)FIO0_INEN + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF)*/ +#define pPPI_CONTROL (volatile unsigned short *)PPI0_CONTROL +#define pPPI_STATUS (volatile unsigned short *)PPI0_STATUS +#define pPPI_COUNT (volatile unsigned short *)PPI0_COUNT +#define pPPI_DELAY (volatile unsigned short *)PPI0_DELAY +#define pPPI_FRAME (volatile unsigned short *)PPI0_FRAME + +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define pDMA0_CONFIG (volatile unsigned short *)DMA1_0_CONFIG +#define pDMA0_NEXT_DESC_PTR (volatile void **)DMA1_0_NEXT_DESC_PTR +#define pDMA0_START_ADDR (volatile void **)DMA1_0_START_ADDR +#define pDMA0_X_COUNT (volatile unsigned short *)DMA1_0_X_COUNT +#define pDMA0_Y_COUNT (volatile unsigned short *)DMA1_0_Y_COUNT +#define pDMA0_X_MODIFY (volatile unsigned short *)DMA1_0_X_MODIFY +#define pDMA0_Y_MODIFY (volatile unsigned short *)DMA1_0_Y_MODIFY +#define pDMA0_CURR_DESC_PTR (volatile void **)DMA1_0_CURR_DESC_PTR +#define pDMA0_CURR_ADDR (volatile void **)DMA1_0_CURR_ADDR +#define pDMA0_CURR_X_COUNT (volatile unsigned short *)DMA1_0_CURR_X_COUNT +#define pDMA0_CURR_Y_COUNT (volatile unsigned short *)DMA1_0_CURR_Y_COUNT +#define pDMA0_IRQ_STATUS (volatile unsigned short *)DMA1_0_IRQ_STATUS +#define pDMA0_PERIPHERAL_MAP (volatile unsigned short *)DMA1_0_PERIPHERAL_MAP + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define pMDMA_D0_CONFIG (volatile unsigned short *)MDMA1_D0_CONFIG +#define pMDMA_D0_NEXT_DESC_PTR (volatile void **)MDMA1_D0_NEXT_DESC_PTR +#define pMDMA_D0_START_ADDR (volatile void **)MDMA1_D0_START_ADDR +#define pMDMA_D0_X_COUNT (volatile unsigned short *)MDMA1_D0_X_COUNT +#define pMDMA_D0_Y_COUNT (volatile unsigned short *)MDMA1_D0_Y_COUNT +#define pMDMA_D0_X_MODIFY (volatile unsigned short *)MDMA1_D0_X_MODIFY +#define pMDMA_D0_Y_MODIFY (volatile unsigned short *)MDMA1_D0_Y_MODIFY +#define pMDMA_D0_CURR_DESC_PTR (volatile void **)MDMA1_D0_CURR_DESC_PTR +#define pMDMA_D0_CURR_ADDR (volatile void **)MDMA1_D0_CURR_ADDR +#define pMDMA_D0_CURR_X_COUNT (volatile unsigned short *)MDMA1_D0_CURR_X_COUNT +#define pMDMA_D0_CURR_Y_COUNT (volatile unsigned short *)MDMA1_D0_CURR_Y_COUNT +#define pMDMA_D0_IRQ_STATUS (volatile unsigned short *)MDMA1_D0_IRQ_STATUS +#define pMDMA_D0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D0_PERIPHERAL_MAP +#define pMDMA_S0_CONFIG (volatile unsigned short *)MDMA1_S0_CONFIG +#define pMDMA_S0_NEXT_DESC_PTR (volatile void **)MDMA1_S0_NEXT_DESC_PTR +#define pMDMA_S0_START_ADDR (volatile void **)MDMA1_S0_START_ADDR +#define pMDMA_S0_X_COUNT (volatile unsigned short *)MDMA1_S0_X_COUNT +#define pMDMA_S0_Y_COUNT (volatile unsigned short *)MDMA1_S0_Y_COUNT +#define pMDMA_S0_X_MODIFY (volatile unsigned short *)MDMA1_S0_X_MODIFY +#define pMDMA_S0_Y_MODIFY (volatile unsigned short *)MDMA1_S0_Y_MODIFY +#define pMDMA_S0_CURR_DESC_PTR (volatile void **)MDMA1_S0_CURR_DESC_PTR +#define pMDMA_S0_CURR_ADDR (volatile void **)MDMA1_S0_CURR_ADDR +#define pMDMA_S0_CURR_X_COUNT (volatile unsigned short *)MDMA1_S0_CURR_X_COUNT +#define pMDMA_S0_CURR_Y_COUNT (volatile unsigned short *)MDMA1_S0_CURR_Y_COUNT +#define pMDMA_S0_IRQ_STATUS (volatile unsigned short *)MDMA1_S0_IRQ_STATUS +#define pMDMA_S0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S0_PERIPHERAL_MAP +#define pMDMA_D1_CONFIG (volatile unsigned short *)MDMA1_D1_CONFIG +#define pMDMA_D1_NEXT_DESC_PTR (volatile void **)MDMA1_D1_NEXT_DESC_PTR +#define pMDMA_D1_START_ADDR (volatile void **)MDMA1_D1_START_ADDR +#define pMDMA_D1_X_COUNT (volatile unsigned short *)MDMA1_D1_X_COUNT +#define pMDMA_D1_Y_COUNT (volatile unsigned short *)MDMA1_D1_Y_COUNT +#define pMDMA_D1_X_MODIFY (volatile unsigned short *)MDMA1_D1_X_MODIFY +#define pMDMA_D1_Y_MODIFY (volatile unsigned short *)MDMA1_D1_Y_MODIFY +#define pMDMA_D1_CURR_DESC_PTR (volatile void **)MDMA1_D1_CURR_DESC_PTR +#define pMDMA_D1_CURR_ADDR (volatile void **)MDMA1_D1_CURR_ADDR +#define pMDMA_D1_CURR_X_COUNT (volatile unsigned short *)MDMA1_D1_CURR_X_COUNT +#define pMDMA_D1_CURR_Y_COUNT (volatile unsigned short *)MDMA1_D1_CURR_Y_COUNT +#define pMDMA_D1_IRQ_STATUS (volatile unsigned short *)MDMA1_D1_IRQ_STATUS +#define pMDMA_D1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D1_PERIPHERAL_MAP +#define pMDMA_S1_CONFIG (volatile unsigned short *)MDMA1_S1_CONFIG +#define pMDMA_S1_NEXT_DESC_PTR (volatile void **)MDMA1_S1_NEXT_DESC_PTR +#define pMDMA_S1_START_ADDR (volatile void **)MDMA1_S1_START_ADDR +#define pMDMA_S1_X_COUNT (volatile unsigned short *)MDMA1_S1_X_COUNT +#define pMDMA_S1_Y_COUNT (volatile unsigned short *)MDMA1_S1_Y_COUNT +#define pMDMA_S1_X_MODIFY (volatile unsigned short *)MDMA1_S1_X_MODIFY +#define pMDMA_S1_Y_MODIFY (volatile unsigned short *)MDMA1_S1_Y_MODIFY +#define pMDMA_S1_CURR_DESC_PTR (volatile void **)MDMA1_S1_CURR_DESC_PTR +#define pMDMA_S1_CURR_ADDR (volatile void **)MDMA1_S1_CURR_ADDR +#define pMDMA_S1_CURR_X_COUNT (volatile unsigned short *)MDMA1_S1_CURR_X_COUNT +#define pMDMA_S1_CURR_Y_COUNT (volatile unsigned short *)MDMA1_S1_CURR_Y_COUNT +#define pMDMA_S1_IRQ_STATUS (volatile unsigned short *)MDMA1_S1_IRQ_STATUS +#define pMDMA_S1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S1_PERIPHERAL_MAP + +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define pDMA1_CONFIG (volatile unsigned short *)DMA2_0_CONFIG +#define pDMA1_NEXT_DESC_PTR (volatile void **)DMA2_0_NEXT_DESC_PTR +#define pDMA1_START_ADDR (volatile void **)DMA2_0_START_ADDR +#define pDMA1_X_COUNT (volatile unsigned short *)DMA2_0_X_COUNT +#define pDMA1_Y_COUNT (volatile unsigned short *)DMA2_0_Y_COUNT +#define pDMA1_X_MODIFY (volatile unsigned short *)DMA2_0_X_MODIFY +#define pDMA1_Y_MODIFY (volatile unsigned short *)DMA2_0_Y_MODIFY +#define pDMA1_CURR_DESC_PTR (volatile void **)DMA2_0_CURR_DESC_PTR +#define pDMA1_CURR_ADDR (volatile void **)DMA2_0_CURR_ADDR +#define pDMA1_CURR_X_COUNT (volatile unsigned short *)DMA2_0_CURR_X_COUNT +#define pDMA1_CURR_Y_COUNT (volatile unsigned short *)DMA2_0_CURR_Y_COUNT +#define pDMA1_IRQ_STATUS (volatile unsigned short *)DMA2_0_IRQ_STATUS +#define pDMA1_PERIPHERAL_MAP (volatile unsigned short *)DMA2_0_PERIPHERAL_MAP +#define pDMA2_CONFIG (volatile unsigned short *)DMA2_1_CONFIG +#define pDMA2_NEXT_DESC_PTR (volatile void **)DMA2_1_NEXT_DESC_PTR +#define pDMA2_START_ADDR (volatile void **)DMA2_1_START_ADDR +#define pDMA2_X_COUNT (volatile unsigned short *)DMA2_1_X_COUNT +#define pDMA2_Y_COUNT (volatile unsigned short *)DMA2_1_Y_COUNT +#define pDMA2_X_MODIFY (volatile unsigned short *)DMA2_1_X_MODIFY +#define pDMA2_Y_MODIFY (volatile unsigned short *)DMA2_1_Y_MODIFY +#define pDMA2_CURR_DESC_PTR (volatile void **)DMA2_1_CURR_DESC_PTR +#define pDMA2_CURR_ADDR (volatile void **)DMA2_1_CURR_ADDR +#define pDMA2_CURR_X_COUNT (volatile unsigned short *)DMA2_1_CURR_X_COUNT +#define pDMA2_CURR_Y_COUNT (volatile unsigned short *)DMA2_1_CURR_Y_COUNT +#define pDMA2_IRQ_STATUS (volatile unsigned short *)DMA2_1_IRQ_STATUS +#define pDMA2_PERIPHERAL_MAP (volatile unsigned short *)DMA2_1_PERIPHERAL_MAP +#define pDMA3_CONFIG (volatile unsigned short *)DMA2_2_CONFIG +#define pDMA3_NEXT_DESC_PTR (volatile void **)DMA2_2_NEXT_DESC_PTR +#define pDMA3_START_ADDR (volatile void **)DMA2_2_START_ADDR +#define pDMA3_X_COUNT (volatile unsigned short *)DMA2_2_X_COUNT +#define pDMA3_Y_COUNT (volatile unsigned short *)DMA2_2_Y_COUNT +#define pDMA3_X_MODIFY (volatile unsigned short *)DMA2_2_X_MODIFY +#define pDMA3_Y_MODIFY (volatile unsigned short *)DMA2_2_Y_MODIFY +#define pDMA3_CURR_DESC_PTR (volatile void **)DMA2_2_CURR_DESC_PTR +#define pDMA3_CURR_ADDR (volatile void **)DMA2_2_CURR_ADDR +#define pDMA3_CURR_X_COUNT (volatile unsigned short *)DMA2_2_CURR_X_COUNT +#define pDMA3_CURR_Y_COUNT (volatile unsigned short *)DMA2_2_CURR_Y_COUNT +#define pDMA3_IRQ_STATUS (volatile unsigned short *)DMA2_2_IRQ_STATUS +#define pDMA3_PERIPHERAL_MAP (volatile unsigned short *)DMA2_2_PERIPHERAL_MAP +#define pDMA4_CONFIG (volatile unsigned short *)DMA2_3_CONFIG +#define pDMA4_NEXT_DESC_PTR (volatile void **)DMA2_3_NEXT_DESC_PTR +#define pDMA4_START_ADDR (volatile void **)DMA2_3_START_ADDR +#define pDMA4_X_COUNT (volatile unsigned short *)DMA2_3_X_COUNT +#define pDMA4_Y_COUNT (volatile unsigned short *)DMA2_3_Y_COUNT +#define pDMA4_X_MODIFY (volatile unsigned short *)DMA2_3_X_MODIFY +#define pDMA4_Y_MODIFY (volatile unsigned short *)DMA2_3_Y_MODIFY +#define pDMA4_CURR_DESC_PTR (volatile void **)DMA2_3_CURR_DESC_PTR +#define pDMA4_CURR_ADDR (volatile void **)DMA2_3_CURR_ADDR +#define pDMA4_CURR_X_COUNT (volatile unsigned short *)DMA2_3_CURR_X_COUNT +#define pDMA4_CURR_Y_COUNT (volatile unsigned short *)DMA2_3_CURR_Y_COUNT +#define pDMA4_IRQ_STATUS (volatile unsigned short *)DMA2_3_IRQ_STATUS +#define pDMA4_PERIPHERAL_MAP (volatile unsigned short *)DMA2_3_PERIPHERAL_MAP +#define pDMA5_CONFIG (volatile unsigned short *)DMA2_4_CONFIG +#define pDMA5_NEXT_DESC_PTR (volatile void **)DMA2_4_NEXT_DESC_PTR +#define pDMA5_START_ADDR (volatile void **)DMA2_4_START_ADDR +#define pDMA5_X_COUNT (volatile unsigned short *)DMA2_4_X_COUNT +#define pDMA5_Y_COUNT (volatile unsigned short *)DMA2_4_Y_COUNT +#define pDMA5_X_MODIFY (volatile unsigned short *)DMA2_4_X_MODIFY +#define pDMA5_Y_MODIFY (volatile unsigned short *)DMA2_4_Y_MODIFY +#define pDMA5_CURR_DESC_PTR (volatile void **)DMA2_4_CURR_DESC_PTR +#define pDMA5_CURR_ADDR (volatile void **)DMA2_4_CURR_ADDR +#define pDMA5_CURR_X_COUNT (volatile unsigned short *)DMA2_4_CURR_X_COUNT +#define pDMA5_CURR_Y_COUNT (volatile unsigned short *)DMA2_4_CURR_Y_COUNT +#define pDMA5_IRQ_STATUS (volatile unsigned short *)DMA2_4_IRQ_STATUS +#define pDMA5_PERIPHERAL_MAP (volatile unsigned short *)DMA2_4_PERIPHERAL_MAP +#define pDMA6_CONFIG (volatile unsigned short *)DMA2_5_CONFIG +#define pDMA6_NEXT_DESC_PTR (volatile void **)DMA2_5_NEXT_DESC_PTR +#define pDMA6_START_ADDR (volatile void **)DMA2_5_START_ADDR +#define pDMA6_X_COUNT (volatile unsigned short *)DMA2_5_X_COUNT +#define pDMA6_Y_COUNT (volatile unsigned short *)DMA2_5_Y_COUNT +#define pDMA6_X_MODIFY (volatile unsigned short *)DMA2_5_X_MODIFY +#define pDMA6_Y_MODIFY (volatile unsigned short *)DMA2_5_Y_MODIFY +#define pDMA6_CURR_DESC_PTR (volatile void **)DMA2_5_CURR_DESC_PTR +#define pDMA6_CURR_ADDR (volatile void **)DMA2_5_CURR_ADDR +#define pDMA6_CURR_X_COUNT (volatile unsigned short *)DMA2_5_CURR_X_COUNT +#define pDMA6_CURR_Y_COUNT (volatile unsigned short *)DMA2_5_CURR_Y_COUNT +#define pDMA6_IRQ_STATUS (volatile unsigned short *)DMA2_5_IRQ_STATUS +#define pDMA6_PERIPHERAL_MAP (volatile unsigned short *)DMA2_5_PERIPHERAL_MAP +#define pDMA7_CONFIG (volatile unsigned short *)DMA2_6_CONFIG +#define pDMA7_NEXT_DESC_PTR (volatile void **)DMA2_6_NEXT_DESC_PTR +#define pDMA7_START_ADDR (volatile void **)DMA2_6_START_ADDR +#define pDMA7_X_COUNT (volatile unsigned short *)DMA2_6_X_COUNT +#define pDMA7_Y_COUNT (volatile unsigned short *)DMA2_6_Y_COUNT +#define pDMA7_X_MODIFY (volatile unsigned short *)DMA2_6_X_MODIFY +#define pDMA7_Y_MODIFY (volatile unsigned short *)DMA2_6_Y_MODIFY +#define pDMA7_CURR_DESC_PTR (volatile void **)DMA2_6_CURR_DESC_PTR +#define pDMA7_CURR_ADDR (volatile void **)DMA2_6_CURR_ADDR +#define pDMA7_CURR_X_COUNT (volatile unsigned short *)DMA2_6_CURR_X_COUNT +#define pDMA7_CURR_Y_COUNT (volatile unsigned short *)DMA2_6_CURR_Y_COUNT +#define pDMA7_IRQ_STATUS (volatile unsigned short *)DMA2_6_IRQ_STATUS +#define pDMA7_PERIPHERAL_MAP (volatile unsigned short *)DMA2_6_PERIPHERAL_MAP + +#endif /* _CDEF_BF561_H */ diff --git a/include/asm-blackfin/arch-bf561/defBF561.h b/include/asm-blackfin/arch-bf561/defBF561.h new file mode 100644 index 0000000..c6e3de5 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/defBF561.h @@ -0,0 +1,1941 @@ +/* + * defBF561.h + * + * (c) Copyright 2001-2003 Analog Devices, Inc. All rights reserved. + * + */ + +/* SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 */ + +#ifndef _DEF_BF561_H +#define _DEF_BF561_H + +/* + * #if !defined(__ADSPBF561__) + * #warning defBF561.h should only be included for BF561 chip. + * #endif + */ + +/* include all Core registers and bit definitions */ +#include <asm/arch-common/def_LPBlackfin.h> + +/* + * Helper macros + * usage: + * P0.H = HI(UART_THR); + * P0.L = LO(UART_THR); + */ + +#define LO(con32) ((con32) & 0xFFFF) +#define lo(con32) ((con32) & 0xFFFF) +#define HI(con32) (((con32) >> 16) & 0xFFFF) +#define hi(con32) (((con32) >> 16) & 0xFFFF) + +/* + * System MMR Register Map + */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define PLL_CTL 0xFFC00000 /* PLL Control register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xFFC0000C /* PLL Status register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register */ + +/* + * System Reset and Interrupt Controller registers for + * core A (0xFFC0 0100-0xFFC0 01FF) + */ +#define SICA_SWRST 0xFFC00100 /* Software Reset register */ +#define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */ +#define SICA_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ +#define SICA_IMASK 0xFFC0010C /* SIC Interrupt Mask register 0 */ +#define SICA_IMASK0 0xFFC0010C /* SIC Interrupt Mask register 0 */ +#define SICA_IMASK1 0xFFC00110 /* SIC Interrupt Mask register 1 */ +#define SICA_IAR0 0xFFC00124 /* SIC Interrupt Assignment Register 0 */ +#define SICA_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */ +#define SICA_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */ +#define SICA_IAR3 0xFFC00130 /* SIC Interrupt Assignment Register 3 */ +#define SICA_IAR4 0xFFC00134 /* SIC Interrupt Assignment Register 4 */ +#define SICA_IAR5 0xFFC00138 /* SIC Interrupt Assignment Register 5 */ +#define SICA_IAR6 0xFFC0013C /* SIC Interrupt Assignment Register 6 */ +#define SICA_IAR7 0xFFC00140 /* SIC Interrupt Assignment Register 7 */ +#define SICA_ISR0 0xFFC00114 /* SIC Interrupt Status register 0 */ +#define SICA_ISR1 0xFFC00118 /* SIC Interrupt Status register 1 */ +#define SICA_IWR0 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */ +#define SICA_IWR1 0xFFC00120 /* SIC Interrupt Wakeup-Enable register 1 */ + +/* + * System Reset and Interrupt Controller registers for + * Core B (0xFFC0 1100-0xFFC0 11FF) + */ +#define SICB_SWRST 0xFFC01100 /* reserved */ +#define SICB_SYSCR 0xFFC01104 /* reserved */ +#define SICB_RVECT 0xFFC01108 /* SIC Reset Vector Address Register */ +#define SICB_IMASK0 0xFFC0110C /* SIC Interrupt Mask register 0 */ +#define SICB_IMASK1 0xFFC01110 /* SIC Interrupt Mask register 1 */ +#define SICB_IAR0 0xFFC01124 /* SIC Interrupt Assignment Register 0 */ +#define SICB_IAR1 0xFFC01128 /* SIC Interrupt Assignment Register 1 */ +#define SICB_IAR2 0xFFC0112C /* SIC Interrupt Assignment Register 2 */ +#define SICB_IAR3 0xFFC01130 /* SIC Interrupt Assignment Register 3 */ +#define SICB_IAR4 0xFFC01134 /* SIC Interrupt Assignment Register 4 */ +#define SICB_IAR5 0xFFC01138 /* SIC Interrupt Assignment Register 5 */ +#define SICB_IAR6 0xFFC0113C /* SIC Interrupt Assignment Register 6 */ +#define SICB_IAR7 0xFFC01140 /* SIC Interrupt Assignment Register 7 */ +#define SICB_ISR0 0xFFC01114 /* SIC Interrupt Status register 0 */ +#define SICB_ISR1 0xFFC01118 /* SIC Interrupt Status register 1 */ +#define SICB_IWR0 0xFFC0111C /* SIC Interrupt Wakeup-Enable register 0 */ +#define SICB_IWR1 0xFFC01120 /* SIC Interrupt Wakeup-Enable register 1 */ + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define WDOGA_CTL 0xFFC00200 /* Watchdog Control register */ +#define WDOGA_CNT 0xFFC00204 /* Watchdog Count register */ +#define WDOGA_STAT 0xFFC00208 /* Watchdog Status register */ + +/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */ +#define WDOGB_CTL 0xFFC01200 /* Watchdog Control register */ +#define WDOGB_CNT 0xFFC01204 /* Watchdog Count register */ +#define WDOGB_STAT 0xFFC01208 /* Watchdog Status register */ + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART_THR 0xFFC00400 /* Transmit Holding register */ +#define UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART_LCR 0xFFC0040C /* Line Control Register */ +#define UART_MCR 0xFFC00410 /* Modem Control Register */ +#define UART_LSR 0xFFC00414 /* Line Status Register */ +#define UART_MSR 0xFFC00418 /* Modem Status Register */ +#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer0 Configuration register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer0 Counter register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer0 Period register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer0 Width register */ +#define TIMER1_CONFIG 0xFFC00610 /* Timer1 Configuration register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer1 Counter register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer1 Period register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer1 Width register */ +#define TIMER2_CONFIG 0xFFC00620 /* Timer2 Configuration register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer2 Counter register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer2 Period register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer2 Width register */ +#define TIMER3_CONFIG 0xFFC00630 /* Timer3 Configuration register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer3 Counter register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer3 Period register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer3 Width register */ +#define TIMER4_CONFIG 0xFFC00640 /* Timer4 Configuration register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer4 Counter register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer4 Period register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer4 Width register */ +#define TIMER5_CONFIG 0xFFC00650 /* Timer5 Configuration register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer5 Counter register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer5 Period register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer5 Width register */ +#define TIMER6_CONFIG 0xFFC00660 /* Timer6 Configuration register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer6 Counter register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer6 Period register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer6 Width register */ +#define TIMER7_CONFIG 0xFFC00670 /* Timer7 Configuration register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer7 Counter register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer7 Period register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer7 Width register */ +#define TMRS8_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TMRS8_DISABLE 0xFFC00684 /* Timer Disable register */ +#define TMRS8_STATUS 0xFFC00688 /* Timer Status register */ + +/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */ +#define TIMER8_CONFIG 0xFFC01600 /* Timer8 Configuration register */ +#define TIMER8_COUNTER 0xFFC01604 /* Timer8 Counter register */ +#define TIMER8_PERIOD 0xFFC01608 /* Timer8 Period register */ +#define TIMER8_WIDTH 0xFFC0160C /* Timer8 Width register */ +#define TIMER9_CONFIG 0xFFC01610 /* Timer9 Configuration register */ +#define TIMER9_COUNTER 0xFFC01614 /* Timer9 Counter register */ +#define TIMER9_PERIOD 0xFFC01618 /* Timer9 Period register */ +#define TIMER9_WIDTH 0xFFC0161C /* Timer9 Width register */ +#define TIMER10_CONFIG 0xFFC01620 /* Timer10 Configuration register */ +#define TIMER10_COUNTER 0xFFC01624 /* Timer10 Counter register */ +#define TIMER10_PERIOD 0xFFC01628 /* Timer10 Period register */ +#define TIMER10_WIDTH 0xFFC0162C /* Timer10 Width register */ +#define TIMER11_CONFIG 0xFFC01630 /* Timer11 Configuration register */ +#define TIMER11_COUNTER 0xFFC01634 /* Timer11 Counter register */ +#define TIMER11_PERIOD 0xFFC01638 /* Timer11 Period register */ +#define TIMER11_WIDTH 0xFFC0163C /* Timer11 Width register */ +#define TMRS4_ENABLE 0xFFC01640 /* Timer Enable Register */ +#define TMRS4_DISABLE 0xFFC01644 /* Timer Disable register */ +#define TMRS4_STATUS 0xFFC01648 /* Timer Status register */ + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define FIO0_FLAG_D 0xFFC00700 /* Flag Data register */ +#define FIO0_FLAG_C 0xFFC00704 /* Flag Clear register */ +#define FIO0_FLAG_S 0xFFC00708 /* Flag Set register */ +#define FIO0_FLAG_T 0xFFC0070C /* Flag Toggle register */ +#define FIO0_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Data register */ +#define FIO0_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Clear register */ +#define FIO0_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Set register */ +#define FIO0_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Toggle register */ +#define FIO0_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Data register */ +#define FIO0_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Clear register */ +#define FIO0_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Set register */ +#define FIO0_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Toggle register */ +#define FIO0_DIR 0xFFC00730 /* Flag Direction register */ +#define FIO0_POLAR 0xFFC00734 /* Flag Polarity register */ +#define FIO0_EDGE 0xFFC00738 /* Flag Interrupt Sensitivity register */ +#define FIO0_BOTH 0xFFC0073C /* Flag Set on Both Edges register */ +#define FIO0_INEN 0xFFC00740 /* Flag Input Enable register */ + +/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */ +#define FIO1_FLAG_D 0xFFC01500 /* Flag Data register */ +#define FIO1_FLAG_C 0xFFC01504 /* Flag Clear register */ +#define FIO1_FLAG_S 0xFFC01508 /* Flag Set register */ +#define FIO1_FLAG_T 0xFFC0150C /* Flag Toggle register */ +#define FIO1_MASKA_D 0xFFC01510 /* Flag Mask Interrupt A Data register */ +#define FIO1_MASKA_C 0xFFC01514 /* Flag Mask Interrupt A Clear register */ +#define FIO1_MASKA_S 0xFFC01518 /* Flag Mask Interrupt A Set register */ +#define FIO1_MASKA_T 0xFFC0151C /* Flag Mask Interrupt A Toggle register */ +#define FIO1_MASKB_D 0xFFC01520 /* Flag Mask Interrupt B Data register */ +#define FIO1_MASKB_C 0xFFC01524 /* Flag Mask Interrupt B Clear register */ +#define FIO1_MASKB_S 0xFFC01528 /* Flag Mask Interrupt B Set register */ +#define FIO1_MASKB_T 0xFFC0152C /* Flag Mask Interrupt B Toggle register */ +#define FIO1_DIR 0xFFC01530 /* Flag Direction register */ +#define FIO1_POLAR 0xFFC01534 /* Flag Polarity register */ +#define FIO1_EDGE 0xFFC01538 /* Flag Interrupt Sensitivity register */ +#define FIO1_BOTH 0xFFC0153C /* Flag Set on Both Edges register */ +#define FIO1_INEN 0xFFC01540 /* Flag Input Enable register */ + +/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */ +#define FIO2_FLAG_D 0xFFC01700 /* Flag Data register */ +#define FIO2_FLAG_C 0xFFC01704 /* Flag Clear register */ +#define FIO2_FLAG_S 0xFFC01708 /* Flag Set register */ +#define FIO2_FLAG_T 0xFFC0170C /* Flag Toggle register */ +#define FIO2_MASKA_D 0xFFC01710 /* Flag Mask Interrupt A Data register */ +#define FIO2_MASKA_C 0xFFC01714 /* Flag Mask Interrupt A Clear register */ +#define FIO2_MASKA_S 0xFFC01718 /* Flag Mask Interrupt A Set register */ +#define FIO2_MASKA_T 0xFFC0171C /* Flag Mask Interrupt A Toggle register */ +#define FIO2_MASKB_D 0xFFC01720 /* Flag Mask Interrupt B Data register */ +#define FIO2_MASKB_C 0xFFC01724 /* Flag Mask Interrupt B Clear register */ +#define FIO2_MASKB_S 0xFFC01728 /* Flag Mask Interrupt B Set register */ +#define FIO2_MASKB_T 0xFFC0172C /* Flag Mask Interrupt B Toggle register */ +#define FIO2_DIR 0xFFC01730 /* Flag Direction register */ +#define FIO2_POLAR 0xFFC01734 /* Flag Polarity register */ +#define FIO2_EDGE 0xFFC01738 /* Flag Interrupt Sensitivity register */ +#define FIO2_BOTH 0xFFC0173C /* Flag Set on Both Edges register */ +#define FIO2_INEN 0xFFC01740 /* Flag Input Enable register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */ +#define PPI0_CONTROL 0xFFC01000 /* PPI0 Control register */ +#define PPI0_STATUS 0xFFC01004 /* PPI0 Status register */ +#define PPI0_COUNT 0xFFC01008 /* PPI0 Transfer Count register */ +#define PPI0_DELAY 0xFFC0100C /* PPI0 Delay Count register */ +#define PPI0_FRAME 0xFFC01010 /* PPI0 Frame Length register */ + +/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */ +#define PPI1_CONTROL 0xFFC01300 /* PPI1 Control register */ +#define PPI1_STATUS 0xFFC01304 /* PPI1 Status register */ +#define PPI1_COUNT 0xFFC01308 /* PPI1 Transfer Count register */ +#define PPI1_DELAY 0xFFC0130C /* PPI1 Delay Count register */ +#define PPI1_FRAME 0xFFC01310 /* PPI1 Frame Length register */ + +/* DMA Traffic controls */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ +#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define DMA1_0_CONFIG 0xFFC01C08 /* DMA1 Channel 0 Configuration register */ +#define DMA1_0_NEXT_DESC_PTR 0xFFC01C00 /* DMA1 Channel 0 Next Descripter Ptr Reg */ +#define DMA1_0_START_ADDR 0xFFC01C04 /* DMA1 Channel 0 Start Address */ +#define DMA1_0_X_COUNT 0xFFC01C10 /* DMA1 Channel 0 Inner Loop Count */ +#define DMA1_0_Y_COUNT 0xFFC01C18 /* DMA1 Channel 0 Outer Loop Count */ +#define DMA1_0_X_MODIFY 0xFFC01C14 /* DMA1 Channel 0 Inner Loop Addr Increment */ +#define DMA1_0_Y_MODIFY 0xFFC01C1C /* DMA1 Channel 0 Outer Loop Addr Increment */ +#define DMA1_0_CURR_DESC_PTR 0xFFC01C20 /* DMA1 Channel 0 Current Descriptor Pointer */ +#define DMA1_0_CURR_ADDR 0xFFC01C24 /* DMA1 Channel 0 Current Address Pointer */ +#define DMA1_0_CURR_X_COUNT 0xFFC01C30 /* DMA1 Channel 0 Current Inner Loop Count */ +#define DMA1_0_CURR_Y_COUNT 0xFFC01C38 /* DMA1 Channel 0 Current Outer Loop Count */ +#define DMA1_0_IRQ_STATUS 0xFFC01C28 /* DMA1 Channel 0 Interrupt Status Register */ +#define DMA1_0_PERIPHERAL_MAP 0xFFC01C2C /* DMA1 Channel 0 Peripheral Map Register */ + +#define DMA1_1_CONFIG 0xFFC01C48 /* DMA1 Channel 1 Configuration register */ +#define DMA1_1_NEXT_DESC_PTR 0xFFC01C40 /* DMA1 Channel 1 Next Descripter Ptr Reg */ +#define DMA1_1_START_ADDR 0xFFC01C44 /* DMA1 Channel 1 Start Address */ +#define DMA1_1_X_COUNT 0xFFC01C50 /* DMA1 Channel 1 Inner Loop Count */ +#define DMA1_1_Y_COUNT 0xFFC01C58 /* DMA1 Channel 1 Outer Loop Count */ +#define DMA1_1_X_MODIFY 0xFFC01C54 /* DMA1 Channel 1 Inner Loop Addr Increment */ +#define DMA1_1_Y_MODIFY 0xFFC01C5C /* DMA1 Channel 1 Outer Loop Addr Increment */ +#define DMA1_1_CURR_DESC_PTR 0xFFC01C60 /* DMA1 Channel 1 Current Descriptor Pointer */ +#define DMA1_1_CURR_ADDR 0xFFC01C64 /* DMA1 Channel 1 Current Address Pointer */ +#define DMA1_1_CURR_X_COUNT 0xFFC01C70 /* DMA1 Channel 1 Current Inner Loop Count */ +#define DMA1_1_CURR_Y_COUNT 0xFFC01C78 /* DMA1 Channel 1 Current Outer Loop Count */ +#define DMA1_1_IRQ_STATUS 0xFFC01C68 /* DMA1 Channel 1 Interrupt Status Register */ +#define DMA1_1_PERIPHERAL_MAP 0xFFC01C6C /* DMA1 Channel 1 Peripheral Map Register */ + +#define DMA1_2_CONFIG 0xFFC01C88 /* DMA1 Channel 2 Configuration register */ +#define DMA1_2_NEXT_DESC_PTR 0xFFC01C80 /* DMA1 Channel 2 Next Descripter Ptr Reg */ +#define DMA1_2_START_ADDR 0xFFC01C84 /* DMA1 Channel 2 Start Address */ +#define DMA1_2_X_COUNT 0xFFC01C90 /* DMA1 Channel 2 Inner Loop Count */ +#define DMA1_2_Y_COUNT 0xFFC01C98 /* DMA1 Channel 2 Outer Loop Count */ +#define DMA1_2_X_MODIFY 0xFFC01C94 /* DMA1 Channel 2 Inner Loop Addr Increment */ +#define DMA1_2_Y_MODIFY 0xFFC01C9C /* DMA1 Channel 2 Outer Loop Addr Increment */ +#define DMA1_2_CURR_DESC_PTR 0xFFC01CA0 /* DMA1 Channel 2 Current Descriptor Pointer */ +#define DMA1_2_CURR_ADDR 0xFFC01CA4 /* DMA1 Channel 2 Current Address Pointer */ +#define DMA1_2_CURR_X_COUNT 0xFFC01CB0 /* DMA1 Channel 2 Current Inner Loop Count */ +#define DMA1_2_CURR_Y_COUNT 0xFFC01CB8 /* DMA1 Channel 2 Current Outer Loop Count */ +#define DMA1_2_IRQ_STATUS 0xFFC01CA8 /* DMA1 Channel 2 Interrupt Status Register */ +#define DMA1_2_PERIPHERAL_MAP 0xFFC01CAC /* DMA1 Channel 2 Peripheral Map Register */ + +#define DMA1_3_CONFIG 0xFFC01CC8 /* DMA1 Channel 3 Configuration register */ +#define DMA1_3_NEXT_DESC_PTR 0xFFC01CC0 /* DMA1 Channel 3 Next Descripter Ptr Reg */ +#define DMA1_3_START_ADDR 0xFFC01CC4 /* DMA1 Channel 3 Start Address */ +#define DMA1_3_X_COUNT 0xFFC01CD0 /* DMA1 Channel 3 Inner Loop Count */ +#define DMA1_3_Y_COUNT 0xFFC01CD8 /* DMA1 Channel 3 Outer Loop Count */ +#define DMA1_3_X_MODIFY 0xFFC01CD4 /* DMA1 Channel 3 Inner Loop Addr Increment */ +#define DMA1_3_Y_MODIFY 0xFFC01CDC /* DMA1 Channel 3 Outer Loop Addr Increment */ +#define DMA1_3_CURR_DESC_PTR 0xFFC01CE0 /* DMA1 Channel 3 Current Descriptor Pointer */ +#define DMA1_3_CURR_ADDR 0xFFC01CE4 /* DMA1 Channel 3 Current Address Pointer */ +#define DMA1_3_CURR_X_COUNT 0xFFC01CF0 /* DMA1 Channel 3 Current Inner Loop Count */ +#define DMA1_3_CURR_Y_COUNT 0xFFC01CF8 /* DMA1 Channel 3 Current Outer Loop Count */ +#define DMA1_3_IRQ_STATUS 0xFFC01CE8 /* DMA1 Channel 3 Interrupt Status Register */ +#define DMA1_3_PERIPHERAL_MAP 0xFFC01CEC /* DMA1 Channel 3 Peripheral Map Register */ + +#define DMA1_4_CONFIG 0xFFC01D08 /* DMA1 Channel 4 Configuration register */ +#define DMA1_4_NEXT_DESC_PTR 0xFFC01D00 /* DMA1 Channel 4 Next Descripter Ptr Reg */ +#define DMA1_4_START_ADDR 0xFFC01D04 /* DMA1 Channel 4 Start Address */ +#define DMA1_4_X_COUNT 0xFFC01D10 /* DMA1 Channel 4 Inner Loop Count */ +#define DMA1_4_Y_COUNT 0xFFC01D18 /* DMA1 Channel 4 Outer Loop Count */ +#define DMA1_4_X_MODIFY 0xFFC01D14 /* DMA1 Channel 4 Inner Loop Addr Increment */ +#define DMA1_4_Y_MODIFY 0xFFC01D1C /* DMA1 Channel 4 Outer Loop Addr Increment */ +#define DMA1_4_CURR_DESC_PTR 0xFFC01D20 /* DMA1 Channel 4 Current Descriptor Pointer */ +#define DMA1_4_CURR_ADDR 0xFFC01D24 /* DMA1 Channel 4 Current Address Pointer */ +#define DMA1_4_CURR_X_COUNT 0xFFC01D30 /* DMA1 Channel 4 Current Inner Loop Count */ +#define DMA1_4_CURR_Y_COUNT 0xFFC01D38 /* DMA1 Channel 4 Current Outer Loop Count */ +#define DMA1_4_IRQ_STATUS 0xFFC01D28 /* DMA1 Channel 4 Interrupt Status Register */ +#define DMA1_4_PERIPHERAL_MAP 0xFFC01D2C /* DMA1 Channel 4 Peripheral Map Register */ + +#define DMA1_5_CONFIG 0xFFC01D48 /* DMA1 Channel 5 Configuration register */ +#define DMA1_5_NEXT_DESC_PTR 0xFFC01D40 /* DMA1 Channel 5 Next Descripter Ptr Reg */ +#define DMA1_5_START_ADDR 0xFFC01D44 /* DMA1 Channel 5 Start Address */ +#define DMA1_5_X_COUNT 0xFFC01D50 /* DMA1 Channel 5 Inner Loop Count */ +#define DMA1_5_Y_COUNT 0xFFC01D58 /* DMA1 Channel 5 Outer Loop Count */ +#define DMA1_5_X_MODIFY 0xFFC01D54 /* DMA1 Channel 5 Inner Loop Addr Increment */ +#define DMA1_5_Y_MODIFY 0xFFC01D5C /* DMA1 Channel 5 Outer Loop Addr Increment */ +#define DMA1_5_CURR_DESC_PTR 0xFFC01D60 /* DMA1 Channel 5 Current Descriptor Pointer */ +#define DMA1_5_CURR_ADDR 0xFFC01D64 /* DMA1 Channel 5 Current Address Pointer */ +#define DMA1_5_CURR_X_COUNT 0xFFC01D70 /* DMA1 Channel 5 Current Inner Loop Count */ +#define DMA1_5_CURR_Y_COUNT 0xFFC01D78 /* DMA1 Channel 5 Current Outer Loop Count */ +#define DMA1_5_IRQ_STATUS 0xFFC01D68 /* DMA1 Channel 5 Interrupt Status Register */ +#define DMA1_5_PERIPHERAL_MAP 0xFFC01D6C /* DMA1 Channel 5 Peripheral Map Register */ + +#define DMA1_6_CONFIG 0xFFC01D88 /* DMA1 Channel 6 Configuration register */ +#define DMA1_6_NEXT_DESC_PTR 0xFFC01D80 /* DMA1 Channel 6 Next Descripter Ptr Reg */ +#define DMA1_6_START_ADDR 0xFFC01D84 /* DMA1 Channel 6 Start Address */ +#define DMA1_6_X_COUNT 0xFFC01D90 /* DMA1 Channel 6 Inner Loop Count */ +#define DMA1_6_Y_COUNT 0xFFC01D98 /* DMA1 Channel 6 Outer Loop Count */ +#define DMA1_6_X_MODIFY 0xFFC01D94 /* DMA1 Channel 6 Inner Loop Addr Increment */ +#define DMA1_6_Y_MODIFY 0xFFC01D9C /* DMA1 Channel 6 Outer Loop Addr Increment */ +#define DMA1_6_CURR_DESC_PTR 0xFFC01DA0 /* DMA1 Channel 6 Current Descriptor Pointer */ +#define DMA1_6_CURR_ADDR 0xFFC01DA4 /* DMA1 Channel 6 Current Address Pointer */ +#define DMA1_6_CURR_X_COUNT 0xFFC01DB0 /* DMA1 Channel 6 Current Inner Loop Count */ +#define DMA1_6_CURR_Y_COUNT 0xFFC01DB8 /* DMA1 Channel 6 Current Outer Loop Count */ +#define DMA1_6_IRQ_STATUS 0xFFC01DA8 /* DMA1 Channel 6 Interrupt Status Register */ +#define DMA1_6_PERIPHERAL_MAP 0xFFC01DAC /* DMA1 Channel 6 Peripheral Map Register */ + +#define DMA1_7_CONFIG 0xFFC01DC8 /* DMA1 Channel 7 Configuration register */ +#define DMA1_7_NEXT_DESC_PTR 0xFFC01DC0 /* DMA1 Channel 7 Next Descripter Ptr Reg */ +#define DMA1_7_START_ADDR 0xFFC01DC4 /* DMA1 Channel 7 Start Address */ +#define DMA1_7_X_COUNT 0xFFC01DD0 /* DMA1 Channel 7 Inner Loop Count */ +#define DMA1_7_Y_COUNT 0xFFC01DD8 /* DMA1 Channel 7 Outer Loop Count */ +#define DMA1_7_X_MODIFY 0xFFC01DD4 /* DMA1 Channel 7 Inner Loop Addr Increment */ +#define DMA1_7_Y_MODIFY 0xFFC01DDC /* DMA1 Channel 7 Outer Loop Addr Increment */ +#define DMA1_7_CURR_DESC_PTR 0xFFC01DE0 /* DMA1 Channel 7 Current Descriptor Pointer */ +#define DMA1_7_CURR_ADDR 0xFFC01DE4 /* DMA1 Channel 7 Current Address Pointer */ +#define DMA1_7_CURR_X_COUNT 0xFFC01DF0 /* DMA1 Channel 7 Current Inner Loop Count */ +#define DMA1_7_CURR_Y_COUNT 0xFFC01DF8 /* DMA1 Channel 7 Current Outer Loop Count */ +#define DMA1_7_IRQ_STATUS 0xFFC01DE8 /* DMA1 Channel 7 Interrupt Status Register */ +#define DMA1_7_PERIPHERAL_MAP 0xFFC01DEC /* DMA1 Channel 7 Peripheral Map Register */ + +#define DMA1_8_CONFIG 0xFFC01E08 /* DMA1 Channel 8 Configuration register */ +#define DMA1_8_NEXT_DESC_PTR 0xFFC01E00 /* DMA1 Channel 8 Next Descripter Ptr Reg */ +#define DMA1_8_START_ADDR 0xFFC01E04 /* DMA1 Channel 8 Start Address */ +#define DMA1_8_X_COUNT 0xFFC01E10 /* DMA1 Channel 8 Inner Loop Count */ +#define DMA1_8_Y_COUNT 0xFFC01E18 /* DMA1 Channel 8 Outer Loop Count */ +#define DMA1_8_X_MODIFY 0xFFC01E14 /* DMA1 Channel 8 Inner Loop Addr Increment */ +#define DMA1_8_Y_MODIFY 0xFFC01E1C /* DMA1 Channel 8 Outer Loop Addr Increment */ +#define DMA1_8_CURR_DESC_PTR 0xFFC01E20 /* DMA1 Channel 8 Current Descriptor Pointer */ +#define DMA1_8_CURR_ADDR 0xFFC01E24 /* DMA1 Channel 8 Current Address Pointer */ +#define DMA1_8_CURR_X_COUNT 0xFFC01E30 /* DMA1 Channel 8 Current Inner Loop Count */ +#define DMA1_8_CURR_Y_COUNT 0xFFC01E38 /* DMA1 Channel 8 Current Outer Loop Count */ +#define DMA1_8_IRQ_STATUS 0xFFC01E28 /* DMA1 Channel 8 Interrupt Status Register */ +#define DMA1_8_PERIPHERAL_MAP 0xFFC01E2C /* DMA1 Channel 8 Peripheral Map Register */ + +#define DMA1_9_CONFIG 0xFFC01E48 /* DMA1 Channel 9 Configuration register */ +#define DMA1_9_NEXT_DESC_PTR 0xFFC01E40 /* DMA1 Channel 9 Next Descripter Ptr Reg */ +#define DMA1_9_START_ADDR 0xFFC01E44 /* DMA1 Channel 9 Start Address */ +#define DMA1_9_X_COUNT 0xFFC01E50 /* DMA1 Channel 9 Inner Loop Count */ +#define DMA1_9_Y_COUNT 0xFFC01E58 /* DMA1 Channel 9 Outer Loop Count */ +#define DMA1_9_X_MODIFY 0xFFC01E54 /* DMA1 Channel 9 Inner Loop Addr Increment */ +#define DMA1_9_Y_MODIFY 0xFFC01E5C /* DMA1 Channel 9 Outer Loop Addr Increment */ +#define DMA1_9_CURR_DESC_PTR 0xFFC01E60 /* DMA1 Channel 9 Current Descriptor Pointer */ +#define DMA1_9_CURR_ADDR 0xFFC01E64 /* DMA1 Channel 9 Current Address Pointer */ +#define DMA1_9_CURR_X_COUNT 0xFFC01E70 /* DMA1 Channel 9 Current Inner Loop Count */ +#define DMA1_9_CURR_Y_COUNT 0xFFC01E78 /* DMA1 Channel 9 Current Outer Loop Count */ +#define DMA1_9_IRQ_STATUS 0xFFC01E68 /* DMA1 Channel 9 Interrupt Status Register */ +#define DMA1_9_PERIPHERAL_MAP 0xFFC01E6C /* DMA1 Channel 9 Peripheral Map Register */ + +#define DMA1_10_CONFIG 0xFFC01E88 /* DMA1 Channel 10 Configuration register */ +#define DMA1_10_NEXT_DESC_PTR 0xFFC01E80 /* DMA1 Channel 10 Next Descripter Ptr Reg */ +#define DMA1_10_START_ADDR 0xFFC01E84 /* DMA1 Channel 10 Start Address */ +#define DMA1_10_X_COUNT 0xFFC01E90 /* DMA1 Channel 10 Inner Loop Count */ +#define DMA1_10_Y_COUNT 0xFFC01E98 /* DMA1 Channel 10 Outer Loop Count */ +#define DMA1_10_X_MODIFY 0xFFC01E94 /* DMA1 Channel 10 Inner Loop Addr Increment */ +#define DMA1_10_Y_MODIFY 0xFFC01E9C /* DMA1 Channel 10 Outer Loop Addr Increment */ +#define DMA1_10_CURR_DESC_PTR 0xFFC01EA0 /* DMA1 Channel 10 Current Descriptor Pointer */ +#define DMA1_10_CURR_ADDR 0xFFC01EA4 /* DMA1 Channel 10 Current Address Pointer */ +#define DMA1_10_CURR_X_COUNT 0xFFC01EB0 /* DMA1 Channel 10 Current Inner Loop Count */ +#define DMA1_10_CURR_Y_COUNT 0xFFC01EB8 /* DMA1 Channel 10 Current Outer Loop Count */ +#define DMA1_10_IRQ_STATUS 0xFFC01EA8 /* DMA1 Channel 10 Interrupt Status Register */ +#define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC /* DMA1 Channel 10 Peripheral Map Register */ + +#define DMA1_11_CONFIG 0xFFC01EC8 /* DMA1 Channel 11 Configuration register */ +#define DMA1_11_NEXT_DESC_PTR 0xFFC01EC0 /* DMA1 Channel 11 Next Descripter Ptr Reg */ +#define DMA1_11_START_ADDR 0xFFC01EC4 /* DMA1 Channel 11 Start Address */ +#define DMA1_11_X_COUNT 0xFFC01ED0 /* DMA1 Channel 11 Inner Loop Count */ +#define DMA1_11_Y_COUNT 0xFFC01ED8 /* DMA1 Channel 11 Outer Loop Count */ +#define DMA1_11_X_MODIFY 0xFFC01ED4 /* DMA1 Channel 11 Inner Loop Addr Increment */ +#define DMA1_11_Y_MODIFY 0xFFC01EDC /* DMA1 Channel 11 Outer Loop Addr Increment */ +#define DMA1_11_CURR_DESC_PTR 0xFFC01EE0 /* DMA1 Channel 11 Current Descriptor Pointer */ +#define DMA1_11_CURR_ADDR 0xFFC01EE4 /* DMA1 Channel 11 Current Address Pointer */ +#define DMA1_11_CURR_X_COUNT 0xFFC01EF0 /* DMA1 Channel 11 Current Inner Loop Count */ +#define DMA1_11_CURR_Y_COUNT 0xFFC01EF8 /* DMA1 Channel 11 Current Outer Loop Count */ +#define DMA1_11_IRQ_STATUS 0xFFC01EE8 /* DMA1 Channel 11 Interrupt Status Register */ +#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC /* DMA1 Channel 11 Peripheral Map Register */ + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define MDMA1_D0_CONFIG 0xFFC01F08 /* MemDMA1 Stream 0 Destination Configuration */ +#define MDMA1_D0_NEXT_DESC_PTR 0xFFC01F00 /* MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA1_D0_START_ADDR 0xFFC01F04 /* MemDMA1 Stream 0 Destination Start Address */ +#define MDMA1_D0_X_COUNT 0xFFC01F10 /* MemDMA1 Stream 0 Destination Inner-Loop Count */ +#define MDMA1_D0_Y_COUNT 0xFFC01F18 /* MemDMA1 Stream 0 Destination Outer-Loop Count */ +#define MDMA1_D0_X_MODIFY 0xFFC01F14 /* MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA1_D0_Y_MODIFY 0xFFC01F1C /* MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA1_D0_CURR_DESC_PTR 0xFFC01F20 /* MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA1_D0_CURR_ADDR 0xFFC01F24 /* MemDMA1 Stream 0 Destination Current Address */ +#define MDMA1_D0_CURR_X_COUNT 0xFFC01F30 /* MemDMA1 Stream 0 Dest Current Inner-Loop Count */ +#define MDMA1_D0_CURR_Y_COUNT 0xFFC01F38 /* MemDMA1 Stream 0 Dest Current Outer-Loop Count */ +#define MDMA1_D0_IRQ_STATUS 0xFFC01F28 /* MemDMA1 Stream 0 Destination Interrupt/Status */ +#define MDMA1_D0_PERIPHERAL_MAP 0xFFC01F2C /* MemDMA1 Stream 0 Destination Peripheral Map */ + +#define MDMA1_S0_CONFIG 0xFFC01F48 /* MemDMA1 Stream 0 Source Configuration */ +#define MDMA1_S0_NEXT_DESC_PTR 0xFFC01F40 /* MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA1_S0_START_ADDR 0xFFC01F44 /* MemDMA1 Stream 0 Source Start Address */ +#define MDMA1_S0_X_COUNT 0xFFC01F50 /* MemDMA1 Stream 0 Source Inner-Loop Count */ +#define MDMA1_S0_Y_COUNT 0xFFC01F58 /* MemDMA1 Stream 0 Source Outer-Loop Count */ +#define MDMA1_S0_X_MODIFY 0xFFC01F54 /* MemDMA1 Stream 0 Source Inner-Loop Address-Increment */ +#define MDMA1_S0_Y_MODIFY 0xFFC01F5C /* MemDMA1 Stream 0 Source Outer-Loop Address-Increment */ +#define MDMA1_S0_CURR_DESC_PTR 0xFFC01F60 /* MemDMA1 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA1_S0_CURR_ADDR 0xFFC01F64 /* MemDMA1 Stream 0 Source Current Address */ +#define MDMA1_S0_CURR_X_COUNT 0xFFC01F70 /* MemDMA1 Stream 0 Source Current Inner-Loop Count */ +#define MDMA1_S0_CURR_Y_COUNT ` 0xFFC01F78 /* MemDMA1 Stream 0 Source Current Outer-Loop Count */ +#define MDMA1_S0_IRQ_STATUS 0xFFC01F68 /* MemDMA1 Stream 0 Source Interrupt/Status */ +#define MDMA1_S0_PERIPHERAL_MAP 0xFFC01F6C /* MemDMA1 Stream 0 Source Peripheral Map */ + +#define MDMA1_D1_CONFIG 0xFFC01F88 /* MemDMA1 Stream 1 Destination Configuration */ +#define MDMA1_D1_NEXT_DESC_PTR 0xFFC01F80 /* MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA1_D1_START_ADDR 0xFFC01F84 /* MemDMA1 Stream 1 Destination Start Address */ +#define MDMA1_D1_X_COUNT 0xFFC01F90 /* MemDMA1 Stream 1 Destination Inner-Loop Count */ +#define MDMA1_D1_Y_COUNT 0xFFC01F98 /* MemDMA1 Stream 1 Destination Outer-Loop Count */ +#define MDMA1_D1_X_MODIFY 0xFFC01F94 /* MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA1_D1_Y_MODIFY 0xFFC01F9C /* MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA1_D1_CURR_DESC_PTR 0xFFC01FA0 /* MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */ +#define MDMA1_D1_CURR_ADDR 0xFFC01FA4 /* MemDMA1 Stream 1 Dest Current Address */ +#define MDMA1_D1_CURR_X_COUNT 0xFFC01FB0 /* MemDMA1 Stream 1 Dest Current Inner-Loop Count */ +#define MDMA1_D1_CURR_Y_COUNT 0xFFC01FB8 /* MemDMA1 Stream 1 Dest Current Outer-Loop Count */ +#define MDMA1_D1_IRQ_STATUS 0xFFC01FA8 /* MemDMA1 Stream 1 Dest Interrupt/Status */ +#define MDMA1_D1_PERIPHERAL_MAP 0xFFC01FAC /* MemDMA1 Stream 1 Dest Peripheral Map */ + +#define MDMA1_S1_CONFIG 0xFFC01FC8 /* MemDMA1 Stream 1 Source Configuration */ +#define MDMA1_S1_NEXT_DESC_PTR 0xFFC01FC0 /* MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA1_S1_START_ADDR 0xFFC01FC4 /* MemDMA1 Stream 1 Source Start Address */ +#define MDMA1_S1_X_COUNT 0xFFC01FD0 /* MemDMA1 Stream 1 Source Inner-Loop Count */ +#define MDMA1_S1_Y_COUNT 0xFFC01FD8 /* MemDMA1 Stream 1 Source Outer-Loop Count */ +#define MDMA1_S1_X_MODIFY 0xFFC01FD4 /* MemDMA1 Stream 1 Source Inner-Loop Address-Increment */ +#define MDMA1_S1_Y_MODIFY 0xFFC01FDC /* MemDMA1 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA1_S1_CURR_DESC_PTR 0xFFC01FE0 /* MemDMA1 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA1_S1_CURR_ADDR 0xFFC01FE4 /* MemDMA1 Stream 1 Source Current Address */ +#define MDMA1_S1_CURR_X_COUNT 0xFFC01FF0 /* MemDMA1 Stream 1 Source Current Inner-Loop Count */ +#define MDMA1_S1_CURR_Y_COUNT 0xFFC01FF8 /* MemDMA1 Stream 1 Source Current Outer-Loop Count */ +#define MDMA1_S1_IRQ_STATUS 0xFFC01FE8 /* MemDMA1 Stream 1 Source Interrupt/Status */ +#define MDMA1_S1_PERIPHERAL_MAP 0xFFC01FEC /* MemDMA1 Stream 1 Source Peripheral Map */ + +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define DMA2_0_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */ +#define DMA2_0_NEXT_DESC_PTR 0xFFC00C00 /* DMA2 Channel 0 Next Descripter Ptr Reg */ +#define DMA2_0_START_ADDR 0xFFC00C04 /* DMA2 Channel 0 Start Address */ +#define DMA2_0_X_COUNT 0xFFC00C10 /* DMA2 Channel 0 Inner Loop Count */ +#define DMA2_0_Y_COUNT 0xFFC00C18 /* DMA2 Channel 0 Outer Loop Count */ +#define DMA2_0_X_MODIFY 0xFFC00C14 /* DMA2 Channel 0 Inner Loop Addr Increment */ +#define DMA2_0_Y_MODIFY 0xFFC00C1C /* DMA2 Channel 0 Outer Loop Addr Increment */ +#define DMA2_0_CURR_DESC_PTR 0xFFC00C20 /* DMA2 Channel 0 Current Descriptor Pointer */ +#define DMA2_0_CURR_ADDR 0xFFC00C24 /* DMA2 Channel 0 Current Address Pointer */ +#define DMA2_0_CURR_X_COUNT 0xFFC00C30 /* DMA2 Channel 0 Current Inner Loop Count */ +#define DMA2_0_CURR_Y_COUNT 0xFFC00C38 /* DMA2 Channel 0 Current Outer Loop Count */ +#define DMA2_0_IRQ_STATUS 0xFFC00C28 /* DMA2 Channel 0 Interrupt Status Register */ +#define DMA2_0_PERIPHERAL_MAP 0xFFC00C2C /* DMA2 Channel 0 Peripheral Map Register */ + +#define DMA2_1_CONFIG 0xFFC00C48 /* DMA2 Channel 1 Configuration register */ +#define DMA2_1_NEXT_DESC_PTR 0xFFC00C40 /* DMA2 Channel 1 Next Descripter Ptr Reg */ +#define DMA2_1_START_ADDR 0xFFC00C44 /* DMA2 Channel 1 Start Address */ +#define DMA2_1_X_COUNT 0xFFC00C50 /* DMA2 Channel 1 Inner Loop Count */ +#define DMA2_1_Y_COUNT 0xFFC00C58 /* DMA2 Channel 1 Outer Loop Count */ +#define DMA2_1_X_MODIFY 0xFFC00C54 /* DMA2 Channel 1 Inner Loop Addr Increment */ +#define DMA2_1_Y_MODIFY 0xFFC00C5C /* DMA2 Channel 1 Outer Loop Addr Increment */ +#define DMA2_1_CURR_DESC_PTR 0xFFC00C60 /* DMA2 Channel 1 Current Descriptor Pointer */ +#define DMA2_1_CURR_ADDR 0xFFC00C64 /* DMA2 Channel 1 Current Address Pointer */ +#define DMA2_1_CURR_X_COUNT 0xFFC00C70 /* DMA2 Channel 1 Current Inner Loop Count */ +#define DMA2_1_CURR_Y_COUNT 0xFFC00C78 /* DMA2 Channel 1 Current Outer Loop Count */ +#define DMA2_1_IRQ_STATUS 0xFFC00C68 /* DMA2 Channel 1 Interrupt Status Register */ +#define DMA2_1_PERIPHERAL_MAP 0xFFC00C6C /* DMA2 Channel 1 Peripheral Map Register */ + +#define DMA2_2_CONFIG 0xFFC00C88 /* DMA2 Channel 2 Configuration register */ +#define DMA2_2_NEXT_DESC_PTR 0xFFC00C80 /* DMA2 Channel 2 Next Descripter Ptr Reg */ +#define DMA2_2_START_ADDR 0xFFC00C84 /* DMA2 Channel 2 Start Address */ +#define DMA2_2_X_COUNT 0xFFC00C90 /* DMA2 Channel 2 Inner Loop Count */ +#define DMA2_2_Y_COUNT 0xFFC00C98 /* DMA2 Channel 2 Outer Loop Count */ +#define DMA2_2_X_MODIFY 0xFFC00C94 /* DMA2 Channel 2 Inner Loop Addr Increment */ +#define DMA2_2_Y_MODIFY 0xFFC00C9C /* DMA2 Channel 2 Outer Loop Addr Increment */ +#define DMA2_2_CURR_DESC_PTR 0xFFC00CA0 /* DMA2 Channel 2 Current Descriptor Pointer */ +#define DMA2_2_CURR_ADDR 0xFFC00CA4 /* DMA2 Channel 2 Current Address Pointer */ +#define DMA2_2_CURR_X_COUNT 0xFFC00CB0 /* DMA2 Channel 2 Current Inner Loop Count */ +#define DMA2_2_CURR_Y_COUNT 0xFFC00CB8 /* DMA2 Channel 2 Current Outer Loop Count */ +#define DMA2_2_IRQ_STATUS 0xFFC00CA8 /* DMA2 Channel 2 Interrupt Status Register */ +#define DMA2_2_PERIPHERAL_MAP 0xFFC00CAC /* DMA2 Channel 2 Peripheral Map Register */ + +#define DMA2_3_CONFIG 0xFFC00CC8 /* DMA2 Channel 3 Configuration register */ +#define DMA2_3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA2 Channel 3 Next Descripter Ptr Reg */ +#define DMA2_3_START_ADDR 0xFFC00CC4 /* DMA2 Channel 3 Start Address */ +#define DMA2_3_X_COUNT 0xFFC00CD0 /* DMA2 Channel 3 Inner Loop Count */ +#define DMA2_3_Y_COUNT 0xFFC00CD8 /* DMA2 Channel 3 Outer Loop Count */ +#define DMA2_3_X_MODIFY 0xFFC00CD4 /* DMA2 Channel 3 Inner Loop Addr Increment */ +#define DMA2_3_Y_MODIFY 0xFFC00CDC /* DMA2 Channel 3 Outer Loop Addr Increment */ +#define DMA2_3_CURR_DESC_PTR 0xFFC00CE0 /* DMA2 Channel 3 Current Descriptor Pointer */ +#define DMA2_3_CURR_ADDR 0xFFC00CE4 /* DMA2 Channel 3 Current Address Pointer */ +#define DMA2_3_CURR_X_COUNT 0xFFC00CF0 /* DMA2 Channel 3 Current Inner Loop Count */ +#define DMA2_3_CURR_Y_COUNT 0xFFC00CF8 /* DMA2 Channel 3 Current Outer Loop Count */ +#define DMA2_3_IRQ_STATUS 0xFFC00CE8 /* DMA2 Channel 3 Interrupt Status Register */ +#define DMA2_3_PERIPHERAL_MAP 0xFFC00CEC /* DMA2 Channel 3 Peripheral Map Register */ + +#define DMA2_4_CONFIG 0xFFC00D08 /* DMA2 Channel 4 Configuration register */ +#define DMA2_4_NEXT_DESC_PTR 0xFFC00D00 /* DMA2 Channel 4 Next Descripter Ptr Reg */ +#define DMA2_4_START_ADDR 0xFFC00D04 /* DMA2 Channel 4 Start Address */ +#define DMA2_4_X_COUNT 0xFFC00D10 /* DMA2 Channel 4 Inner Loop Count */ +#define DMA2_4_Y_COUNT 0xFFC00D18 /* DMA2 Channel 4 Outer Loop Count */ +#define DMA2_4_X_MODIFY 0xFFC00D14 /* DMA2 Channel 4 Inner Loop Addr Increment */ +#define DMA2_4_Y_MODIFY 0xFFC00D1C /* DMA2 Channel 4 Outer Loop Addr Increment */ +#define DMA2_4_CURR_DESC_PTR 0xFFC00D20 /* DMA2 Channel 4 Current Descriptor Pointer */ +#define DMA2_4_CURR_ADDR 0xFFC00D24 /* DMA2 Channel 4 Current Address Pointer */ +#define DMA2_4_CURR_X_COUNT 0xFFC00D30 /* DMA2 Channel 4 Current Inner Loop Count */ +#define DMA2_4_CURR_Y_COUNT 0xFFC00D38 /* DMA2 Channel 4 Current Outer Loop Count */ +#define DMA2_4_IRQ_STATUS 0xFFC00D28 /* DMA2 Channel 4 Interrupt Status Register */ +#define DMA2_4_PERIPHERAL_MAP 0xFFC00D2C /* DMA2 Channel 4 Peripheral Map Register */ + +#define DMA2_5_CONFIG 0xFFC00D48 /* DMA2 Channel 5 Configuration register */ +#define DMA2_5_NEXT_DESC_PTR 0xFFC00D40 /* DMA2 Channel 5 Next Descripter Ptr Reg */ +#define DMA2_5_START_ADDR 0xFFC00D44 /* DMA2 Channel 5 Start Address */ +#define DMA2_5_X_COUNT 0xFFC00D50 /* DMA2 Channel 5 Inner Loop Count */ +#define DMA2_5_Y_COUNT 0xFFC00D58 /* DMA2 Channel 5 Outer Loop Count */ +#define DMA2_5_X_MODIFY 0xFFC00D54 /* DMA2 Channel 5 Inner Loop Addr Increment */ +#define DMA2_5_Y_MODIFY 0xFFC00D5C /* DMA2 Channel 5 Outer Loop Addr Increment */ +#define DMA2_5_CURR_DESC_PTR 0xFFC00D60 /* DMA2 Channel 5 Current Descriptor Pointer */ +#define DMA2_5_CURR_ADDR 0xFFC00D64 /* DMA2 Channel 5 Current Address Pointer */ +#define DMA2_5_CURR_X_COUNT 0xFFC00D70 /* DMA2 Channel 5 Current Inner Loop Count */ +#define DMA2_5_CURR_Y_COUNT 0xFFC00D78 /* DMA2 Channel 5 Current Outer Loop Count */ +#define DMA2_5_IRQ_STATUS 0xFFC00D68 /* DMA2 Channel 5 Interrupt Status Register */ +#define DMA2_5_PERIPHERAL_MAP 0xFFC00D6C /* DMA2 Channel 5 Peripheral Map Register */ + +#define DMA2_6_CONFIG 0xFFC00D88 /* DMA2 Channel 6 Configuration register */ +#define DMA2_6_NEXT_DESC_PTR 0xFFC00D80 /* DMA2 Channel 6 Next Descripter Ptr Reg */ +#define DMA2_6_START_ADDR 0xFFC00D84 /* DMA2 Channel 6 Start Address */ +#define DMA2_6_X_COUNT 0xFFC00D90 /* DMA2 Channel 6 Inner Loop Count */ +#define DMA2_6_Y_COUNT 0xFFC00D98 /* DMA2 Channel 6 Outer Loop Count */ +#define DMA2_6_X_MODIFY 0xFFC00D94 /* DMA2 Channel 6 Inner Loop Addr Increment */ +#define DMA2_6_Y_MODIFY 0xFFC00D9C /* DMA2 Channel 6 Outer Loop Addr Increment */ +#define DMA2_6_CURR_DESC_PTR 0xFFC00DA0 /* DMA2 Channel 6 Current Descriptor Pointer */ +#define DMA2_6_CURR_ADDR 0xFFC00DA4 /* DMA2 Channel 6 Current Address Pointer */ +#define DMA2_6_CURR_X_COUNT 0xFFC00DB0 /* DMA2 Channel 6 Current Inner Loop Count */ +#define DMA2_6_CURR_Y_COUNT 0xFFC00DB8 /* DMA2 Channel 6 Current Outer Loop Count */ +#define DMA2_6_IRQ_STATUS 0xFFC00DA8 /* DMA2 Channel 6 Interrupt Status Register */ +#define DMA2_6_PERIPHERAL_MAP 0xFFC00DAC /* DMA2 Channel 6 Peripheral Map Register */ + +#define DMA2_7_CONFIG 0xFFC00DC8 /* DMA2 Channel 7 Configuration register */ +#define DMA2_7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA2 Channel 7 Next Descripter Ptr Reg */ +#define DMA2_7_START_ADDR 0xFFC00DC4 /* DMA2 Channel 7 Start Address */ +#define DMA2_7_X_COUNT 0xFFC00DD0 /* DMA2 Channel 7 Inner Loop Count */ +#define DMA2_7_Y_COUNT 0xFFC00DD8 /* DMA2 Channel 7 Outer Loop Count */ +#define DMA2_7_X_MODIFY 0xFFC00DD4 /* DMA2 Channel 7 Inner Loop Addr Increment */ +#define DMA2_7_Y_MODIFY 0xFFC00DDC /* DMA2 Channel 7 Outer Loop Addr Increment */ +#define DMA2_7_CURR_DESC_PTR 0xFFC00DE0 /* DMA2 Channel 7 Current Descriptor Pointer */ +#define DMA2_7_CURR_ADDR 0xFFC00DE4 /* DMA2 Channel 7 Current Address Pointer */ +#define DMA2_7_CURR_X_COUNT 0xFFC00DF0 /* DMA2 Channel 7 Current Inner Loop Count */ +#define DMA2_7_CURR_Y_COUNT 0xFFC00DF8 /* DMA2 Channel 7 Current Outer Loop Count */ +#define DMA2_7_IRQ_STATUS 0xFFC00DE8 /* DMA2 Channel 7 Interrupt Status Register */ +#define DMA2_7_PERIPHERAL_MAP 0xFFC00DEC /* DMA2 Channel 7 Peripheral Map Register */ + +#define DMA2_8_CONFIG 0xFFC00E08 /* DMA2 Channel 8 Configuration register */ +#define DMA2_8_NEXT_DESC_PTR 0xFFC00E00 /* DMA2 Channel 8 Next Descripter Ptr Reg */ +#define DMA2_8_START_ADDR 0xFFC00E04 /* DMA2 Channel 8 Start Address */ +#define DMA2_8_X_COUNT 0xFFC00E10 /* DMA2 Channel 8 Inner Loop Count */ +#define DMA2_8_Y_COUNT 0xFFC00E18 /* DMA2 Channel 8 Outer Loop Count */ +#define DMA2_8_X_MODIFY 0xFFC00E14 /* DMA2 Channel 8 Inner Loop Addr Increment */ +#define DMA2_8_Y_MODIFY 0xFFC00E1C /* DMA2 Channel 8 Outer Loop Addr Increment */ +#define DMA2_8_CURR_DESC_PTR 0xFFC00E20 /* DMA2 Channel 8 Current Descriptor Pointer */ +#define DMA2_8_CURR_ADDR 0xFFC00E24 /* DMA2 Channel 8 Current Address Pointer */ +#define DMA2_8_CURR_X_COUNT 0xFFC00E30 /* DMA2 Channel 8 Current Inner Loop Count */ +#define DMA2_8_CURR_Y_COUNT 0xFFC00E38 /* DMA2 Channel 8 Current Outer Loop Count */ +#define DMA2_8_IRQ_STATUS 0xFFC00E28 /* DMA2 Channel 8 Interrupt Status Register */ +#define DMA2_8_PERIPHERAL_MAP 0xFFC00E2C /* DMA2 Channel 8 Peripheral Map Register */ + +#define DMA2_9_CONFIG 0xFFC00E48 /* DMA2 Channel 9 Configuration register */ +#define DMA2_9_NEXT_DESC_PTR 0xFFC00E40 /* DMA2 Channel 9 Next Descripter Ptr Reg */ +#define DMA2_9_START_ADDR 0xFFC00E44 /* DMA2 Channel 9 Start Address */ +#define DMA2_9_X_COUNT 0xFFC00E50 /* DMA2 Channel 9 Inner Loop Count */ +#define DMA2_9_Y_COUNT 0xFFC00E58 /* DMA2 Channel 9 Outer Loop Count */ +#define DMA2_9_X_MODIFY 0xFFC00E54 /* DMA2 Channel 9 Inner Loop Addr Increment */ +#define DMA2_9_Y_MODIFY 0xFFC00E5C /* DMA2 Channel 9 Outer Loop Addr Increment */ +#define DMA2_9_CURR_DESC_PTR 0xFFC00E60 /* DMA2 Channel 9 Current Descriptor Pointer */ +#define DMA2_9_CURR_ADDR 0xFFC00E64 /* DMA2 Channel 9 Current Address Pointer */ +#define DMA2_9_CURR_X_COUNT 0xFFC00E70 /* DMA2 Channel 9 Current Inner Loop Count */ +#define DMA2_9_CURR_Y_COUNT 0xFFC00E78 /* DMA2 Channel 9 Current Outer Loop Count */ +#define DMA2_9_IRQ_STATUS 0xFFC00E68 /* DMA2 Channel 9 Interrupt Status Register */ +#define DMA2_9_PERIPHERAL_MAP 0xFFC00E6C /* DMA2 Channel 9 Peripheral Map Register */ + +#define DMA2_10_CONFIG 0xFFC00E88 /* DMA2 Channel 10 Configuration register */ +#define DMA2_10_NEXT_DESC_PTR 0xFFC00E80 /* DMA2 Channel 10 Next Descripter Ptr Reg */ +#define DMA2_10_START_ADDR 0xFFC00E84 /* DMA2 Channel 10 Start Address */ +#define DMA2_10_X_COUNT 0xFFC00E90 /* DMA2 Channel 10 Inner Loop Count */ +#define DMA2_10_Y_COUNT 0xFFC00E98 /* DMA2 Channel 10 Outer Loop Count */ +#define DMA2_10_X_MODIFY 0xFFC00E94 /* DMA2 Channel 10 Inner Loop Addr Increment */ +#define DMA2_10_Y_MODIFY 0xFFC00E9C /* DMA2 Channel 10 Outer Loop Addr Increment */ +#define DMA2_10_CURR_DESC_PTR 0xFFC00EA0 /* DMA2 Channel 10 Current Descriptor Pointer */ +#define DMA2_10_CURR_ADDR 0xFFC00EA4 /* DMA2 Channel 10 Current Address Pointer */ +#define DMA2_10_CURR_X_COUNT 0xFFC00EB0 /* DMA2 Channel 10 Current Inner Loop Count */ +#define DMA2_10_CURR_Y_COUNT 0xFFC00EB8 /* DMA2 Channel 10 Current Outer Loop Count */ +#define DMA2_10_IRQ_STATUS 0xFFC00EA8 /* DMA2 Channel 10 Interrupt Status Register */ +#define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC /* DMA2 Channel 10 Peripheral Map Register */ + +#define DMA2_11_CONFIG 0xFFC00EC8 /* DMA2 Channel 11 Configuration register */ +#define DMA2_11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA2 Channel 11 Next Descripter Ptr Reg */ +#define DMA2_11_START_ADDR 0xFFC00EC4 /* DMA2 Channel 11 Start Address */ +#define DMA2_11_X_COUNT 0xFFC00ED0 /* DMA2 Channel 11 Inner Loop Count */ +#define DMA2_11_Y_COUNT 0xFFC00ED8 /* DMA2 Channel 11 Outer Loop Count */ +#define DMA2_11_X_MODIFY 0xFFC00ED4 /* DMA2 Channel 11 Inner Loop Addr Increment */ +#define DMA2_11_Y_MODIFY 0xFFC00EDC /* DMA2 Channel 11 Outer Loop Addr Increment */ +#define DMA2_11_CURR_DESC_PTR 0xFFC00EE0 /* DMA2 Channel 11 Current Descriptor Pointer */ +#define DMA2_11_CURR_ADDR 0xFFC00EE4 /* DMA2 Channel 11 Current Address Pointer */ +#define DMA2_11_CURR_X_COUNT 0xFFC00EF0 /* DMA2 Channel 11 Current Inner Loop Count */ +#define DMA2_11_CURR_Y_COUNT 0xFFC00EF8 /* DMA2 Channel 11 Current Outer Loop Count */ +#define DMA2_11_IRQ_STATUS 0xFFC00EE8 /* DMA2 Channel 11 Interrupt Status Register */ +#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC /* DMA2 Channel 11 Peripheral Map Register */ + +/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */ +#define MDMA2_D0_CONFIG 0xFFC00F08 /* MemDMA2 Stream 0 Destination Configuration register */ +#define MDMA2_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA2_D0_START_ADDR 0xFFC00F04 /* MemDMA2 Stream 0 Destination Start Address */ +#define MDMA2_D0_X_COUNT 0xFFC00F10 /* MemDMA2 Stream 0 Dest Inner-Loop Count register */ +#define MDMA2_D0_Y_COUNT 0xFFC00F18 /* MemDMA2 Stream 0 Dest Outer-Loop Count register */ +#define MDMA2_D0_X_MODIFY 0xFFC00F14 /* MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA2_D0_Y_MODIFY 0xFFC00F1C /* MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA2_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA2_D0_CURR_ADDR 0xFFC00F24 /* MemDMA2 Stream 0 Destination Current Address */ +#define MDMA2_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */ +#define MDMA2_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */ +#define MDMA2_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA2 Stream 0 Dest Interrupt/Status Register */ +#define MDMA2_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA2 Stream 0 Destination Peripheral Map register */ + +#define MDMA2_S0_CONFIG 0xFFC00F48 /* MemDMA2 Stream 0 Source Configuration register */ +#define MDMA2_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA2_S0_START_ADDR 0xFFC00F44 /* MemDMA2 Stream 0 Source Start Address */ +#define MDMA2_S0_X_COUNT 0xFFC00F50 /* MemDMA2 Stream 0 Source Inner-Loop Count register */ +#define MDMA2_S0_Y_COUNT 0xFFC00F58 /* MemDMA2 Stream 0 Source Outer-Loop Count register */ +#define MDMA2_S0_X_MODIFY 0xFFC00F54 /* MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */ +#define MDMA2_S0_Y_MODIFY 0xFFC00F5C /* MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */ +#define MDMA2_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA2 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA2_S0_CURR_ADDR 0xFFC00F64 /* MemDMA2 Stream 0 Source Current Address */ +#define MDMA2_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA2 Stream 0 Src Current Inner-Loop Count reg */ +#define MDMA2_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA2 Stream 0 Src Current Outer-Loop Count reg */ +#define MDMA2_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA2 Stream 0 Source Interrupt/Status Register */ +#define MDMA2_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA2 Stream 0 Source Peripheral Map register */ + +#define MDMA2_D1_CONFIG 0xFFC00F88 /* MemDMA2 Stream 1 Destination Configuration register */ +#define MDMA2_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA2_D1_START_ADDR 0xFFC00F84 /* MemDMA2 Stream 1 Destination Start Address */ +#define MDMA2_D1_X_COUNT 0xFFC00F90 /* MemDMA2 Stream 1 Dest Inner-Loop Count register */ +#define MDMA2_D1_Y_COUNT 0xFFC00F98 /* MemDMA2 Stream 1 Dest Outer-Loop Count register */ +#define MDMA2_D1_X_MODIFY 0xFFC00F94 /* MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA2_D1_Y_MODIFY 0xFFC00F9C /* MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA2_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA2 Stream 1 Destination Current Descriptor Ptr */ +#define MDMA2_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA2 Stream 1 Destination Current Address reg */ +#define MDMA2_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */ +#define MDMA2_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */ +#define MDMA2_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA2 Stream 1 Destination Interrupt/Status Reg */ +#define MDMA2_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA2 Stream 1 Destination Peripheral Map register */ + +#define MDMA2_S1_CONFIG 0xFFC00FC8 /* MemDMA2 Stream 1 Source Configuration register */ +#define MDMA2_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA2_S1_START_ADDR 0xFFC00FC4 /* MemDMA2 Stream 1 Source Start Address */ +#define MDMA2_S1_X_COUNT 0xFFC00FD0 /* MemDMA2 Stream 1 Source Inner-Loop Count register */ +#define MDMA2_S1_Y_COUNT 0xFFC00FD8 /* MemDMA2 Stream 1 Source Outer-Loop Count register */ +#define MDMA2_S1_X_MODIFY 0xFFC00FD4 /* MemDMA2 Stream 1 Src Inner-Loop Address-Increment */ +#define MDMA2_S1_Y_MODIFY 0xFFC00FDC /* MemDMA2 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA2_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA2 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA2_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA2 Stream 1 Source Current Address */ +#define MDMA2_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA2 Stream 1 Source Current Inner-Loop Count */ +#define MDMA2_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA2 Stream 1 Source Current Outer-Loop Count */ +#define MDMA2_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA2 Stream 1 Source Interrupt/Status Register */ +#define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA2 Stream 1 Source Peripheral Map register */ + +/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ +#define IMDMA_D0_CONFIG 0xFFC01808 /* IMDMA Stream 0 Destination Configuration */ +#define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800 /* IMDMA Stream 0 Destination Next Descriptor Ptr Reg */ +#define IMDMA_D0_START_ADDR 0xFFC01804 /* IMDMA Stream 0 Destination Start Address */ +#define IMDMA_D0_X_COUNT 0xFFC01810 /* IMDMA Stream 0 Destination Inner-Loop Count */ +#define IMDMA_D0_Y_COUNT 0xFFC01818 /* IMDMA Stream 0 Destination Outer-Loop Count */ +#define IMDMA_D0_X_MODIFY 0xFFC01814 /* IMDMA Stream 0 Dest Inner-Loop Address-Increment */ +#define IMDMA_D0_Y_MODIFY 0xFFC0181C /* IMDMA Stream 0 Dest Outer-Loop Address-Increment */ +#define IMDMA_D0_CURR_DESC_PTR 0xFFC01820 /* IMDMA Stream 0 Destination Current Descriptor Ptr */ +#define IMDMA_D0_CURR_ADDR 0xFFC01824 /* IMDMA Stream 0 Destination Current Address */ +#define IMDMA_D0_CURR_X_COUNT 0xFFC01830 /* IMDMA Stream 0 Destination Current Inner-Loop Count */ +#define IMDMA_D0_CURR_Y_COUNT 0xFFC01838 /* IMDMA Stream 0 Destination Current Outer-Loop Count */ +#define IMDMA_D0_IRQ_STATUS 0xFFC01828 /* IMDMA Stream 0 Destination Interrupt/Status */ + +#define IMDMA_S0_CONFIG 0xFFC01848 /* IMDMA Stream 0 Source Configuration */ +#define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840 /* IMDMA Stream 0 Source Next Descriptor Ptr Reg */ +#define IMDMA_S0_START_ADDR 0xFFC01844 /* IMDMA Stream 0 Source Start Address */ +#define IMDMA_S0_X_COUNT 0xFFC01850 /* IMDMA Stream 0 Source Inner-Loop Count */ +#define IMDMA_S0_Y_COUNT 0xFFC01858 /* IMDMA Stream 0 Source Outer-Loop Count */ +#define IMDMA_S0_X_MODIFY 0xFFC01854 /* IMDMA Stream 0 Source Inner-Loop Address-Increment */ +#define IMDMA_S0_Y_MODIFY 0xFFC0185C /* IMDMA Stream 0 Source Outer-Loop Address-Increment */ +#define IMDMA_S0_CURR_DESC_PTR 0xFFC01860 /* IMDMA Stream 0 Source Current Descriptor Ptr reg */ +#define IMDMA_S0_CURR_ADDR 0xFFC01864 /* IMDMA Stream 0 Source Current Address */ +#define IMDMA_S0_CURR_X_COUNT 0xFFC01870 /* IMDMA Stream 0 Source Current Inner-Loop Count */ +#define IMDMA_S0_CURR_Y_COUNT 0xFFC01878 /* IMDMA Stream 0 Source Current Outer-Loop Count */ +#define IMDMA_S0_IRQ_STATUS 0xFFC01868 /* IMDMA Stream 0 Source Interrupt/Status */ + +#define IMDMA_D1_CONFIG 0xFFC01888 /* IMDMA Stream 1 Destination Configuration */ +#define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880 /* IMDMA Stream 1 Destination Next Descriptor Ptr Reg */ +#define IMDMA_D1_START_ADDR 0xFFC01884 /* IMDMA Stream 1 Destination Start Address */ +#define IMDMA_D1_X_COUNT 0xFFC01890 /* IMDMA Stream 1 Destination Inner-Loop Count */ +#define IMDMA_D1_Y_COUNT 0xFFC01898 /* IMDMA Stream 1 Destination Outer-Loop Count */ +#define IMDMA_D1_X_MODIFY 0xFFC01894 /* IMDMA Stream 1 Dest Inner-Loop Address-Increment */ +#define IMDMA_D1_Y_MODIFY 0xFFC0189C /* IMDMA Stream 1 Dest Outer-Loop Address-Increment */ +#define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0 /* IMDMA Stream 1 Destination Current Descriptor Ptr */ +#define IMDMA_D1_CURR_ADDR 0xFFC018A4 /* IMDMA Stream 1 Destination Current Address */ +#define IMDMA_D1_CURR_X_COUNT 0xFFC018B0 /* IMDMA Stream 1 Destination Current Inner-Loop Count */ +#define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8 /* IMDMA Stream 1 Destination Current Outer-Loop Count */ +#define IMDMA_D1_IRQ_STATUS 0xFFC018A8 /* IMDMA Stream 1 Destination Interrupt/Status */ + +#define IMDMA_S1_CONFIG 0xFFC018C8 /* IMDMA Stream 1 Source Configuration */ +#define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0 /* IMDMA Stream 1 Source Next Descriptor Ptr Reg */ +#define IMDMA_S1_START_ADDR 0xFFC018C4 /* IMDMA Stream 1 Source Start Address */ +#define IMDMA_S1_X_COUNT 0xFFC018D0 /* IMDMA Stream 1 Source Inner-Loop Count */ +#define IMDMA_S1_Y_COUNT 0xFFC018D8 /* IMDMA Stream 1 Source Outer-Loop Count */ +#define IMDMA_S1_X_MODIFY 0xFFC018D4 /* IMDMA Stream 1 Source Inner-Loop Address-Increment */ +#define IMDMA_S1_Y_MODIFY 0xFFC018DC /* IMDMA Stream 1 Source Outer-Loop Address-Increment */ +#define IMDMA_S1_CURR_DESC_PTR 0xFFC018E0 /* IMDMA Stream 1 Source Current Descriptor Ptr reg */ +#define IMDMA_S1_CURR_ADDR 0xFFC018E4 /* IMDMA Stream 1 Source Current Address */ +#define IMDMA_S1_CURR_X_COUNT 0xFFC018F0 /* IMDMA Stream 1 Source Current Inner-Loop Count */ +#define IMDMA_S1_CURR_Y_COUNT 0xFFC018F8 /* IMDMA Stream 1 Source Current Outer-Loop Count */ +#define IMDMA_S1_IRQ_STATUS 0xFFC018E8 /* IMDMA Stream 1 Source Interrupt/Status */ + +/* + * System MMR Register Bits + */ + +/* PLL AND RESET MASKS */ + +/* PLL_CTL Masks */ +#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ +#define PLL_OFF 0x00000002 /* Shut off PLL clocks */ +#define STOPCK_OFF 0x00000008 /* Core clock off */ +#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ +#define BYPASS 0x00000100 /* Bypass the PLL */ + +/* PLL_DIV Masks */ + +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ + +/* SWRST Mask */ +#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */ +#define SWRST_DBL_FAULT_B 0x00000800 /* SWRST Core B Double Fault */ +#define SWRST_DBL_FAULT_A 0x00001000 /* SWRST Core A Double Fault */ +#define SWRST_WDT_B 0x00002000 /* SWRST Watchdog B */ +#define SWRST_WDT_A 0x00004000 /* SWRST Watchdog A */ +#define SWRST_OCCURRED 0x00008000 /* SWRST Status */ + +/* + * SYSTEM INTERRUPT CONTROLLER MASKS + * SICu_IARv Masks + * u = A or B + * v = 0 to 7 + * w = 0 or 1 + + * Per_number = 0 to 63 + * IVG_number = 7 to 15 + * Peripheral #Per_number assigned IVG #IVG_number + * Usage: + * r0.l = lo(Peripheral_IVG(62, 10)); + * r0.h = hi(Peripheral_IVG(62, 10)); + */ +#define Peripheral_IVG(Per_number, IVG_number) \ + ( (IVG_number) -7) << ( ((Per_number)%8) *4) + +/* SICx_IMASKw Masks */ +/* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))/* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +/* x = pos 0 to 31, for 32-63 use value-32 */ +#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ +/* Wakeup Disable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) + +/* + * WATCHDOG TIMER MASKS + */ + +/* Watchdog Timer WDOG_CTL Register */ +#define WDOGA_CTL 0xFFC00200 +#define WDOGA_CNT 0xFFC00204 +#define WDOGA_STAT 0xFFC00208 +#define WDOGB_CTL 0xFFC01200 +#define WDOGB_CNT 0xFFC01204 +#define WDOGB_STAT 0xFFC01208 +#define ICTL(x) ((x<<1) & 0x0006) +#define ENABLE_RESET 0x00000000 /* Set Watchdog Timer to generate reset */ +#define ENABLE_NMI 0x00000002 /* Set Watchdog Timer to generate non-maskable interrupt */ +#define ENABLE_GPI 0x00000004 /* Set Watchdog Timer to generate general-purpose interrupt */ +#define DISABLE_EVT 0x00000006 /* Disable Watchdog Timer interrupts */ + +#define TMR_EN 0x0000 +#define TMR_DIS 0x0AD0 +#define TRO 0x8000 + +#define ICTL_P0 0x01 +#define ICTL_P1 0x02 +#define TRO_P 0x0F + +/* + * UART CONTROLLER MASKS + */ + +/* UART_LCR Register */ + +#define DLAB 0x80 +#define SB 0x40 +#define STP 0x20 +#define EPS 0x10 +#define PEN 0x08 +#define STB 0x04 +#define WLS(x) ((x-5) & 0x03) + +#define DLAB_P 0x07 +#define SB_P 0x06 +#define STP_P 0x05 +#define EPS_P 0x04 +#define PEN_P 0x03 +#define STB_P 0x02 +#define WLS_P1 0x01 +#define WLS_P0 0x00 + +/* UART_MCR Register */ +#define LOOP_ENA 0x10 +#define LOOP_ENA_P 0x04 + +/* UART_LSR Register */ +#define TEMT 0x40 +#define THRE 0x20 +#define BI 0x10 +#define FE 0x08 +#define PE 0x04 +#define OE 0x02 +#define DR 0x01 + +#define TEMP_P 0x06 +#define THRE_P 0x05 +#define BI_P 0x04 +#define FE_P 0x03 +#define PE_P 0x02 +#define OE_P 0x01 +#define DR_P 0x00 + +/* UART_IER Register */ +#define ELSI 0x04 +#define ETBEI 0x02 +#define ERBFI 0x01 + +#define ELSI_P 0x02 +#define ETBEI_P 0x01 +#define ERBFI_P 0x00 + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define NINT 0x01 +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 +#define NINT_P 0x00 + +/* UART_GCTL Register */ +#define FFE 0x20 +#define FPE 0x10 +#define RPOLC 0x08 +#define TPOLC 0x04 +#define IREN 0x02 +#define UCEN 0x01 + +#define FFE_P 0x05 +#define FPE_P 0x04 +#define RPOLC_P 0x03 +#define TPOLC_P 0x02 +#define IREN_P 0x01 +#define UCEN_P 0x00 + +/* + * SERIAL PORT MASKS + */ + +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks */ +#define SLEN 0x001F /* TX Word Length */ +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* TX Right-First Data Order */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define RULAW 0x0008 /* u-Law enable */ +#define RALAW 0x000C /* A-Law enable */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN 0x001F /* RX Word Length */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* RX FIFO Not Empty Status */ +#define RUVF 0x0002 /* RX Underflow Status */ +#define ROVF 0x0004 /* RX Overflow Status */ +#define TXF 0x0008 /* TX FIFO Full Status */ +#define TUVF 0x0010 /* TX Underflow Status */ +#define TOVF 0x0020 /* TX Overflow Status */ +#define TXHRE 0x0040 /* TX Hold Register Empty */ + +/* SPORTx_MCMC1 Masks */ +#define WSIZE 0x0000F000 /* Multichannel Window Size Field */ +#define WOFF 0x000003FF /* Multichannel Window Offset Field */ + +/* SPORTx_MCMC2 Masks */ +#define MCCRM 0x00000003 /* Multichannel Clock Recovery Mode */ +#define MCDTXPE 0x00000004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x00000008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x00000010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x00000080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD 0x0000F000 /* Multichannel Frame Delay */ + +/* + * PARALLEL PERIPHERAL INTERFACE (PPI) MASKS + */ + +/* PPI_CONTROL Masks */ +#define PORT_EN 0x00000001 /* PPI Port Enable */ +#define PORT_DIR 0x00000002 /* PPI Port Direction */ +#define XFR_TYPE 0x0000000C /* PPI Transfer Type */ +#define PORT_CFG 0x00000030 /* PPI Port Configuration */ +#define FLD_SEL 0x00000040 /* PPI Active Field Select */ +#define PACK_EN 0x00000080 /* PPI Packing Mode */ +#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x00003800 /* PPI Data Length */ +#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ +#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#define POL 0x0000C000 /* PPI Signal Polarities */ + +/* PPI_STATUS Masks */ +#define FLD 0x00000400 /* Field Indicator */ +#define FT_ERR 0x00000800 /* Frame Track Error */ +#define OVR 0x00001000 /* FIFO Overflow Error */ +#define UNDR 0x00002000 /* FIFO Underrun Error */ +#define ERR_DET 0x00004000 /* Error Detected Indicator */ +#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ + +/* + * DMA CONTROLLER MASKS + */ + +/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */ +#define DMAEN 0x00000001 /* Channel Enable */ +#define WNR 0x00000002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ +#define DMA2D 0x00000010 /* 2D/1D* Mode */ +#define RESTART 0x00000020 /* Restart */ +#define DI_SEL 0x00000040 /* Data Interrupt Select */ +#define DI_EN 0x00000080 /* Data Interrupt Enable */ +#define NDSIZE 0x00000900 /* Next Descriptor Size */ +#define FLOW 0x00007000 /* Flow Control */ + +#define DMAEN_P 0 /* Channel Enable */ +#define WNR_P 1 /* Channel Direction (W/R*) */ +#define DMA2D_P 4 /* 2D/1D* Mode */ +#define RESTART_P 5 /* Restart */ +#define DI_SEL_P 6 /* Data Interrupt Select */ +#define DI_EN_P 7 /* Data Interrupt Enable */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */ + +#define DMA_DONE 0x00000001 /* DMA Done Indicator */ +#define DMA_ERR 0x00000002 /* DMA Error Indicator */ +#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ +#define DMA_RUN 0x00000008 /* DMA Running Indicator */ + +#define DMA_DONE_P 0 /* DMA Done Indicator */ +#define DMA_ERR_P 1 /* DMA Error Indicator */ +#define DFETCH_P 2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 3 /* DMA Running Indicator */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */ + +#define CTYPE 0x00000040 /* DMA Channel Type Indicator */ +#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ +#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ +#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ +#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ +#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ +#define PMAP 0x00007000 /* DMA Peripheral Map Field */ + +/* + * GENERAL PURPOSE TIMER MASKS + */ + +/* PWM Timer bit definitions */ + +/* TIMER_ENABLE Register */ +#define TIMEN0 0x0001 +#define TIMEN1 0x0002 +#define TIMEN2 0x0004 +#define TIMEN3 0x0008 +#define TIMEN4 0x0010 +#define TIMEN5 0x0020 +#define TIMEN6 0x0040 +#define TIMEN7 0x0080 +#define TIMEN8 0x0001 +#define TIMEN9 0x0002 +#define TIMEN10 0x0004 +#define TIMEN11 0x0008 + +#define TIMEN0_P 0x00 +#define TIMEN1_P 0x01 +#define TIMEN2_P 0x02 +#define TIMEN3_P 0x03 +#define TIMEN4_P 0x04 +#define TIMEN5_P 0x05 +#define TIMEN6_P 0x06 +#define TIMEN7_P 0x07 +#define TIMEN8_P 0x00 +#define TIMEN9_P 0x01 +#define TIMEN10_P 0x02 +#define TIMEN11_P 0x03 + +/* TIMER_DISABLE Register */ +#define TIMDIS0 0x0001 +#define TIMDIS1 0x0002 +#define TIMDIS2 0x0004 +#define TIMDIS3 0x0008 +#define TIMDIS4 0x0010 +#define TIMDIS5 0x0020 +#define TIMDIS6 0x0040 +#define TIMDIS7 0x0080 +#define TIMDIS8 0x0001 +#define TIMDIS9 0x0002 +#define TIMDIS10 0x0004 +#define TIMDIS11 0x0008 + +#define TIMDIS0_P 0x00 +#define TIMDIS1_P 0x01 +#define TIMDIS2_P 0x02 +#define TIMDIS3_P 0x03 +#define TIMDIS4_P 0x04 +#define TIMDIS5_P 0x05 +#define TIMDIS6_P 0x06 +#define TIMDIS7_P 0x07 +#define TIMDIS8_P 0x00 +#define TIMDIS9_P 0x01 +#define TIMDIS10_P 0x02 +#define TIMDIS11_P 0x03 + +/* TIMER_STATUS Register */ +#define TIMIL0 0x00000001 +#define TIMIL1 0x00000002 +#define TIMIL2 0x00000004 +#define TIMIL3 0x00000008 +#define TIMIL4 0x00010000 +#define TIMIL5 0x00020000 +#define TIMIL6 0x00040000 +#define TIMIL7 0x00080000 +#define TIMIL8 0x0001 +#define TIMIL9 0x0002 +#define TIMIL10 0x0004 +#define TIMIL11 0x0008 +#define TOVL_ERR0 0x00000010 +#define TOVL_ERR1 0x00000020 +#define TOVL_ERR2 0x00000040 +#define TOVL_ERR3 0x00000080 +#define TOVL_ERR4 0x00100000 +#define TOVL_ERR5 0x00200000 +#define TOVL_ERR6 0x00400000 +#define TOVL_ERR7 0x00800000 +#define TOVL_ERR8 0x0010 +#define TOVL_ERR9 0x0020 +#define TOVL_ERR10 0x0040 +#define TOVL_ERR11 0x0080 +#define TRUN0 0x00001000 +#define TRUN1 0x00002000 +#define TRUN2 0x00004000 +#define TRUN3 0x00008000 +#define TRUN4 0x10000000 +#define TRUN5 0x20000000 +#define TRUN6 0x40000000 +#define TRUN7 0x80000000 +#define TRUN8 0x1000 +#define TRUN9 0x2000 +#define TRUN10 0x4000 +#define TRUN11 0x8000 + +#define TIMIL0_P 0x00 +#define TIMIL1_P 0x01 +#define TIMIL2_P 0x02 +#define TIMIL3_P 0x03 +#define TIMIL4_P 0x10 +#define TIMIL5_P 0x11 +#define TIMIL6_P 0x12 +#define TIMIL7_P 0x13 +#define TIMIL8_P 0x00 +#define TIMIL9_P 0x01 +#define TIMIL10_P 0x02 +#define TIMIL11_P 0x03 +#define TOVL_ERR0_P 0x04 +#define TOVL_ERR1_P 0x05 +#define TOVL_ERR2_P 0x06 +#define TOVL_ERR3_P 0x07 +#define TOVL_ERR4_P 0x14 +#define TOVL_ERR5_P 0x15 +#define TOVL_ERR6_P 0x16 +#define TOVL_ERR7_P 0x17 +#define TOVL_ERR8_P 0x04 +#define TOVL_ERR9_P 0x05 +#define TOVL_ERR10_P 0x06 +#define TOVL_ERR11_P 0x07 +#define TRUN0_P 0x0C +#define TRUN1_P 0x0D +#define TRUN2_P 0x0E +#define TRUN3_P 0x0F +#define TRUN4_P 0x1C +#define TRUN5_P 0x1D +#define TRUN6_P 0x1E +#define TRUN7_P 0x1F +#define TRUN8_P 0x0C +#define TRUN9_P 0x0D +#define TRUN10_P 0x0E +#define TRUN11_P 0x0F + +/* TIMERx_CONFIG Registers */ +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 +#define PULSE_HI 0x0004 +#define PERIOD_CNT 0x0008 +#define IRQ_ENA 0x0010 +#define TIN_SEL 0x0020 +#define OUT_DIS 0x0040 +#define CLK_SEL 0x0080 +#define TOGGLE_HI 0x0100 +#define EMU_RUN 0x0200 +#define ERR_TYP(x) ((x & 0x03) << 14) + +#define TMODE_P0 0x00 +#define TMODE_P1 0x01 +#define PULSE_HI_P 0x02 +#define PERIOD_CNT_P 0x03 +#define IRQ_ENA_P 0x04 +#define TIN_SEL_P 0x05 +#define OUT_DIS_P 0x06 +#define CLK_SEL_P 0x07 +#define TOGGLE_HI_P 0x08 +#define EMU_RUN_P 0x09 +#define ERR_TYP_P0 0x0E +#define ERR_TYP_P1 0x0F + +/* + * PROGRAMMABLE FLAG MASKS + */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ +#define PF0_P 0 +#define PF1_P 1 +#define PF2_P 2 +#define PF3_P 3 +#define PF4_P 4 +#define PF5_P 5 +#define PF6_P 6 +#define PF7_P 7 +#define PF8_P 8 +#define PF9_P 9 +#define PF10_P 10 +#define PF11_P 11 +#define PF12_P 12 +#define PF13_P 13 +#define PF14_P 14 +#define PF15_P 15 + +/* + * SERIAL PERIPHERAL INTERFACE (SPI) MASKS + */ + +/* SPI_CTL Masks */ +#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ +#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ +#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ +#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ +#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ +#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ +#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ + +/* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer.*/ +#define CPHA 0x00000400 +#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ +#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ +#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ +#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ + +/* SPI_FLG Masks */ +#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_FLG Bit Positions */ +#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_STAT Masks */ +#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ +#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ +#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ +#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ +#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ +#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ +#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ + +/* + * ASYNCHRONOUS MEMORY CONTROLLER MASKS + */ + +/* AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_B0 0x0002 /* Enable Asynchronous Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0,/ 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ +#define B0_PEN 0x0010 /* Enable 16-bit packing Bank 0 */ +#define B1_PEN 0x0020 /* Enable 16-bit packing Bank 1 */ +#define B2_PEN 0x0040 /* Enable 16-bit packing Bank 2 */ +#define B3_PEN 0x0080 /* Enable 16-bit packing Bank 3 */ + +/* AMGCTL Bit Positions */ +#define AMCKEN_P 0x00000000 /* Enable CLKOUT */ +#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ +#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ +#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ +#define B0_PEN_P 0x004 /* Enable 16-bit packing Bank 0 */ +#define B1_PEN_P 0x005 /* Enable 16-bit packing Bank 1 */ +#define B2_PEN_P 0x006 /* Enable 16-bit packing Bank 2 */ +#define B3_PEN_P 0x007 /* Enable 16-bit packing Bank 3 */ + +/* AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ +#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ +#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ +#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ +#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ +#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ +#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ +#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ +#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ +#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ +#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ +#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ +#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ +#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ +#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ +#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ +#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ +#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ +#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ +#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ +#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ +#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ + +/* AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ +#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ +#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ +#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ +#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ +#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ +#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ +#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ +#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ +#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ +#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ +#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ +#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ +#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ + +/* + * SDRAM CONTROLLER MASKS + */ + +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ +#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ +#define PFE 0x00000010 /* Enable SDRAM prefetch */ +#define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-up start delay */ +#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ +#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ +#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ +#define EBUFE 0x02000000 /* Enable external buffering timing */ +#define FBBRW 0x04000000 /* Fast back-to-back read write enable */ +#define EMREN 0x10000000 /* Extended mode register enable */ +#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ +#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ + +/* EBIU_SDBCTL Masks */ +#define EB0_E 0x00000001 /* Enable SDRAM external bank 0 */ +#define EB0_SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB0_SZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EB0_SZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EB0_SZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EB0_CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB0_CAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EB0_CAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EB0_CAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +#define EB1_E 0x00000100 /* Enable SDRAM external bank 1 */ +#define EB1__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB1__SZ_32 0x00000200 /* SDRAM external bank size = 32MB */ +#define EB1__SZ_64 0x00000400 /* SDRAM external bank size = 64MB */ +#define EB1__SZ_128 0x00000600 /* SDRAM external bank size = 128MB */ +#define EB1__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB1__CAW_9 0x00001000 /* SDRAM external bank column address width = 9 bits */ +#define EB1__CAW_10 0x00002000 /* SDRAM external bank column address width = 9 bits */ +#define EB1__CAW_11 0x00003000 /* SDRAM external bank column address width = 9 bits */ + +#define EB2__E 0x00010000 /* Enable SDRAM external bank 2 */ +#define EB2__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB2__SZ_32 0x00020000 /* SDRAM external bank size = 32MB */ +#define EB2__SZ_64 0x00040000 /* SDRAM external bank size = 64MB */ +#define EB2__SZ_128 0x00060000 /* SDRAM external bank size = 128MB */ +#define EB2__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB2__CAW_9 0x00100000 /* SDRAM external bank column address width = 9 bits */ +#define EB2__CAW_10 0x00200000 /* SDRAM external bank column address width = 9 bits */ +#define EB2__CAW_11 0x00300000 /* SDRAM external bank column address width = 9 bits */ + +#define EB3__E 0x01000000 /* Enable SDRAM external bank 3 */ +#define EB3__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB3__SZ_32 0x02000000 /* SDRAM external bank size = 32MB */ +#define EB3__SZ_64 0x04000000 /* SDRAM external bank size = 64MB */ +#define EB3__SZ_128 0x06000000 /* SDRAM external bank size = 128MB */ +#define EB3__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB3__CAW_9 0x10000000 /* SDRAM external bank column address width = 9 bits */ +#define EB3__CAW_10 0x20000000 /* SDRAM external bank column address width = 9 bits */ +#define EB3__CAW_11 0x30000000 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x00000001 /* SDRAM controller is idle */ +#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ +#define SDPUA 0x00000004 /* SDRAM power up active */ +#define SDRS 0x00000008 /* SDRAM is in reset state */ +#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ +#define BGSTAT 0x00000020 /* Bus granted */ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status register */ + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define FIO_FLAG_D 0xFFC00700 /* Flag Data register */ +#define FIO_FLAG_C 0xFFC00704 /* Flag Clear register */ +#define FIO_FLAG_S 0xFFC00708 /* Flag Set register */ +#define FIO_FLAG_T 0xFFC0070C /* Flag Toggle register */ +#define FIO_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Data register */ +#define FIO_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Clear register */ +#define FIO_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Set register */ +#define FIO_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Toggle register */ +#define FIO_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Data register */ +#define FIO_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Clear register */ +#define FIO_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Set register */ +#define FIO_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Toggle register */ +#define FIO_DIR 0xFFC00730 /* Flag Direction register */ +#define FIO_POLAR 0xFFC00734 /* Flag Polarity register */ +#define FIO_EDGE 0xFFC00738 /* Flag Interrupt Sensitivity register */ +#define FIO_BOTH 0xFFC0073C /* Flag Set on Both Edges register */ +#define FIO_INEN 0xFFC00740 /* Flag Input Enable register */ + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI0 Control register */ +#define PPI_STATUS 0xFFC01004 /* PPI0 Status register */ +#define PPI_COUNT 0xFFC01008 /* PPI0 Transfer Count register */ +#define PPI_DELAY 0xFFC0100C /* PPI0 Delay Count register */ +#define PPI_FRAME 0xFFC01010 /* PPI0 Frame Length register */ + +/* + * System Reset and Interrupt Controller registers for + * core A (0xFFC0 0100-0xFFC0 01FF) + */ +#define SWRST 0xFFC00100 /* Software Reset register */ +#define SYSCR 0xFFC00104 /* System Reset Configuration register */ +#define RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ +#define SIC_SWRST 0xFFC00100 /* Software Reset register */ +#define SIC_SYSCR 0xFFC00104 /* System Reset Configuration register */ +#define SIC_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* SIC Interrupt Mask register 0 - hack to fix old tests */ +#define SIC_IAR 0xFFC00124 /* SIC Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */ +#define SIC_ISR 0xFFC00114 /* SIC Interrupt Status register 0 */ +#define SIC_IWR 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */ + +/* EBIU_SDBCTL Masks */ +#define EB_E 0x00000001 /* Enable SDRAM external bank 0 */ +#define EB_SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB_SZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EB_SZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EB_SZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EB_CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB_CAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EB_CAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EB_CAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x00000001 /* Enable SDRAM external bank 0 */ +#define EBSZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EBSZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EBSZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EBSZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EBCAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EBCAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define MDMA_D0_CONFIG 0xFFC01F08 /* MemDMA1 Stream 0 Destination Configuration */ +#define MDMA_D0_NEXT_DESC_PTR 0xFFC01F00 /* MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA_D0_START_ADDR 0xFFC01F04 /* MemDMA1 Stream 0 Destination Start Address */ +#define MDMA_D0_X_COUNT 0xFFC01F10 /* MemDMA1 Stream 0 Destination Inner-Loop Count */ +#define MDMA_D0_Y_COUNT 0xFFC01F18 /* MemDMA1 Stream 0 Destination Outer-Loop Count */ +#define MDMA_D0_X_MODIFY 0xFFC01F14 /* MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA_D0_Y_MODIFY 0xFFC01F1C /* MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC01F20 /* MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA_D0_CURR_ADDR 0xFFC01F24 /* MemDMA1 Stream 0 Destination Current Address */ +#define MDMA_D0_CURR_X_COUNT 0xFFC01F30 /* MemDMA1 Stream 0 Dest Current Inner-Loop Count */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC01F38 /* MemDMA1 Stream 0 Dest Current Outer-Loop Count */ +#define MDMA_D0_IRQ_STATUS 0xFFC01F28 /* MemDMA1 Stream 0 Destination Interrupt/Status */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC01F2C /* MemDMA1 Stream 0 Destination Peripheral Map */ + +#define MDMA_S0_CONFIG 0xFFC01F48 /* MemDMA1 Stream 0 Source Configuration */ +#define MDMA_S0_NEXT_DESC_PTR 0xFFC01F40 /* MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA_S0_START_ADDR 0xFFC01F44 /* MemDMA1 Stream 0 Source Start Address */ +#define MDMA_S0_X_COUNT 0xFFC01F50 /* MemDMA1 Stream 0 Source Inner-Loop Count */ +#define MDMA_S0_Y_COUNT 0xFFC01F58 /* MemDMA1 Stream 0 Source Outer-Loop Count */ +#define MDMA_S0_X_MODIFY 0xFFC01F54 /* MemDMA1 Stream 0 Source Inner-Loop Address-Increment */ +#define MDMA_S0_Y_MODIFY 0xFFC01F5C /* MemDMA1 Stream 0 Source Outer-Loop Address-Increment */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC01F60 /* MemDMA1 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA_S0_CURR_ADDR 0xFFC01F64 /* MemDMA1 Stream 0 Source Current Address */ +#define MDMA_S0_CURR_X_COUNT 0xFFC01F70 /* MemDMA1 Stream 0 Source Current Inner-Loop Count */ +#define MDMA_S0_CURR_Y_COUNT ` 0xFFC01F78 /* MemDMA1 Stream 0 Source Current Outer-Loop Count */ +#define MDMA_S0_IRQ_STATUS 0xFFC01F68 /* MemDMA1 Stream 0 Source Interrupt/Status */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC01F6C /* MemDMA1 Stream 0 Source Peripheral Map */ + +#define MDMA_D1_CONFIG 0xFFC01F88 /* MemDMA1 Stream 1 Destination Configuration */ +#define MDMA_D1_NEXT_DESC_PTR 0xFFC01F80 /* MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA_D1_START_ADDR 0xFFC01F84 /* MemDMA1 Stream 1 Destination Start Address */ +#define MDMA_D1_X_COUNT 0xFFC01F90 /* MemDMA1 Stream 1 Destination Inner-Loop Count */ +#define MDMA_D1_Y_COUNT 0xFFC01F98 /* MemDMA1 Stream 1 Destination Outer-Loop Count */ +#define MDMA_D1_X_MODIFY 0xFFC01F94 /* MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA_D1_Y_MODIFY 0xFFC01F9C /* MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC01FA0 /* MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */ +#define MDMA_D1_CURR_ADDR 0xFFC01FA4 /* MemDMA1 Stream 1 Dest Current Address */ +#define MDMA_D1_CURR_X_COUNT 0xFFC01FB0 /* MemDMA1 Stream 1 Dest Current Inner-Loop Count */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC01FB8 /* MemDMA1 Stream 1 Dest Current Outer-Loop Count */ +#define MDMA_D1_IRQ_STATUS 0xFFC01FA8 /* MemDMA1 Stream 1 Dest Interrupt/Status */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC01FAC /* MemDMA1 Stream 1 Dest Peripheral Map */ + +#define MDMA_S1_CONFIG 0xFFC01FC8 /* MemDMA1 Stream 1 Source Configuration */ +#define MDMA_S1_NEXT_DESC_PTR 0xFFC01FC0 /* MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA_S1_START_ADDR 0xFFC01FC4 /* MemDMA1 Stream 1 Source Start Address */ +#define MDMA_S1_X_COUNT 0xFFC01FD0 /* MemDMA1 Stream 1 Source Inner-Loop Count */ +#define MDMA_S1_Y_COUNT 0xFFC01FD8 /* MemDMA1 Stream 1 Source Outer-Loop Count */ +#define MDMA_S1_X_MODIFY 0xFFC01FD4 /* MemDMA1 Stream 1 Source Inner-Loop Address-Increment */ +#define MDMA_S1_Y_MODIFY 0xFFC01FDC /* MemDMA1 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC01FE0 /* MemDMA1 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA_S1_CURR_ADDR 0xFFC01FE4 /* MemDMA1 Stream 1 Source Current Address */ +#define MDMA_S1_CURR_X_COUNT 0xFFC01FF0 /* MemDMA1 Stream 1 Source Current Inner-Loop Count */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC01FF8 /* MemDMA1 Stream 1 Source Current Outer-Loop Count */ +#define MDMA_S1_IRQ_STATUS 0xFFC01FE8 /* MemDMA1 Stream 1 Source Interrupt/Status */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC01FEC /* MemDMA1 Stream 1 Source Peripheral Map */ + +#define DMA0_CONFIG 0xFFC01C08 /* DMA1 Channel 0 Configuration register */ +#define DMA0_NEXT_DESC_PTR 0xFFC01C00 /* DMA1 Channel 0 Next Descripter Ptr Reg */ +#define DMA0_START_ADDR 0xFFC01C04 /* DMA1 Channel 0 Start Address */ +#define DMA0_X_COUNT 0xFFC01C10 /* DMA1 Channel 0 Inner Loop Count */ +#define DMA0_Y_COUNT 0xFFC01C18 /* DMA1 Channel 0 Outer Loop Count */ +#define DMA0_X_MODIFY 0xFFC01C14 /* DMA1 Channel 0 Inner Loop Addr Increment */ +#define DMA0_Y_MODIFY 0xFFC01C1C /* DMA1 Channel 0 Outer Loop Addr Increment */ +#define DMA0_CURR_DESC_PTR 0xFFC01C20 /* DMA1 Channel 0 Current Descriptor Pointer */ +#define DMA0_CURR_ADDR 0xFFC01C24 /* DMA1 Channel 0 Current Address Pointer */ +#define DMA0_CURR_X_COUNT 0xFFC01C30 /* DMA1 Channel 0 Current Inner Loop Count */ +#define DMA0_CURR_Y_COUNT 0xFFC01C38 /* DMA1 Channel 0 Current Outer Loop Count */ +#define DMA0_IRQ_STATUS 0xFFC01C28 /* DMA1 Channel 0 Interrupt Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC01C2C /* DMA1 Channel 0 Peripheral Map Register */ + +#define DMA1_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */ +#define DMA1_NEXT_DESC_PTR 0xFFC00C00 /* DMA2 Channel 0 Next Descripter Ptr Reg */ +#define DMA1_START_ADDR 0xFFC00C04 /* DMA2 Channel 0 Start Address */ +#define DMA1_X_COUNT 0xFFC00C10 /* DMA2 Channel 0 Inner Loop Count */ +#define DMA1_Y_COUNT 0xFFC00C18 /* DMA2 Channel 0 Outer Loop Count */ +#define DMA1_X_MODIFY 0xFFC00C14 /* DMA2 Channel 0 Inner Loop Addr Increment */ +#define DMA1_Y_MODIFY 0xFFC00C1C /* DMA2 Channel 0 Outer Loop Addr Increment */ +#define DMA1_CURR_DESC_PTR 0xFFC00C20 /* DMA2 Channel 0 Current Descriptor Pointer */ +#define DMA1_CURR_ADDR 0xFFC00C24 /* DMA2 Channel 0 Current Address Pointer */ +#define DMA1_CURR_X_COUNT 0xFFC00C30 /* DMA2 Channel 0 Current Inner Loop Count */ +#define DMA1_CURR_Y_COUNT 0xFFC00C38 /* DMA2 Channel 0 Current Outer Loop Count */ +#define DMA1_IRQ_STATUS 0xFFC00C28 /* DMA2 Channel 0 Interrupt /Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C2C /* DMA2 Channel 0 Peripheral Map Register */ + +#define DMA2_CONFIG 0xFFC00C48 /* DMA2 Channel 1 Configuration register */ +#define DMA2_NEXT_DESC_PTR 0xFFC00C40 /* DMA2 Channel 1 Next Descripter Ptr Reg */ +#define DMA2_START_ADDR 0xFFC00C44 /* DMA2 Channel 1 Start Address */ +#define DMA2_X_COUNT 0xFFC00C50 /* DMA2 Channel 1 Inner Loop Count */ +#define DMA2_Y_COUNT 0xFFC00C58 /* DMA2 Channel 1 Outer Loop Count */ +#define DMA2_X_MODIFY 0xFFC00C54 /* DMA2 Channel 1 Inner Loop Addr Increment */ +#define DMA2_Y_MODIFY 0xFFC00C5C /* DMA2 Channel 1 Outer Loop Addr Increment */ +#define DMA2_CURR_DESC_PTR 0xFFC00C60 /* DMA2 Channel 1 Current Descriptor Pointer */ +#define DMA2_CURR_ADDR 0xFFC00C64 /* DMA2 Channel 1 Current Address Pointer */ +#define DMA2_CURR_X_COUNT 0xFFC00C70 /* DMA2 Channel 1 Current Inner Loop Count */ +#define DMA2_CURR_Y_COUNT 0xFFC00C78 /* DMA2 Channel 1 Current Outer Loop Count */ +#define DMA2_IRQ_STATUS 0xFFC00C68 /* DMA2 Channel 1 Interrupt /Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00C6C /* DMA2 Channel 1 Peripheral Map Register */ + +#define DMA3_CONFIG 0xFFC00C88 /* DMA2 Channel 2 Configuration register */ +#define DMA3_NEXT_DESC_PTR 0xFFC00C80 /* DMA2 Channel 2 Next Descripter Ptr Reg */ +#define DMA3_START_ADDR 0xFFC00C84 /* DMA2 Channel 2 Start Address */ +#define DMA3_X_COUNT 0xFFC00C90 /* DMA2 Channel 2 Inner Loop Count */ +#define DMA3_Y_COUNT 0xFFC00C98 /* DMA2 Channel 2 Outer Loop Count */ +#define DMA3_X_MODIFY 0xFFC00C94 /* DMA2 Channel 2 Inner Loop Addr Increment */ +#define DMA3_Y_MODIFY 0xFFC00C9C /* DMA2 Channel 2 Outer Loop Addr Increment */ +#define DMA3_CURR_DESC_PTR 0xFFC00CA0 /* DMA2 Channel 2 Current Descriptor Pointer */ +#define DMA3_CURR_ADDR 0xFFC00CA4 /* DMA2 Channel 2 Current Address Pointer */ +#define DMA3_CURR_X_COUNT 0xFFC00CB0 /* DMA2 Channel 2 Current Inner Loop Count */ +#define DMA3_CURR_Y_COUNT 0xFFC00CB8 /* DMA2 Channel 2 Current Outer Loop Count */ +#define DMA3_IRQ_STATUS 0xFFC00CA8 /* DMA2 Channel 2 Interrupt /Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CAC /* DMA2 Channel 2 Peripheral Map Register */ + +#define DMA4_CONFIG 0xFFC00CC8 /* DMA2 Channel 3 Configuration register */ +#define DMA4_NEXT_DESC_PTR 0xFFC00CC0 /* DMA2 Channel 3 Next Descripter Ptr Reg */ +#define DMA4_START_ADDR 0xFFC00CC4 /* DMA2 Channel 3 Start Address */ +#define DMA4_X_COUNT 0xFFC00CD0 /* DMA2 Channel 3 Inner Loop Count */ +#define DMA4_Y_COUNT 0xFFC00CD8 /* DMA2 Channel 3 Outer Loop Count */ +#define DMA4_X_MODIFY 0xFFC00CD4 /* DMA2 Channel 3 Inner Loop Addr Increment */ +#define DMA4_Y_MODIFY 0xFFC00CDC /* DMA2 Channel 3 Outer Loop Addr Increment */ +#define DMA4_CURR_DESC_PTR 0xFFC00CE0 /* DMA2 Channel 3 Current Descriptor Pointer */ +#define DMA4_CURR_ADDR 0xFFC00CE4 /* DMA2 Channel 3 Current Address Pointer */ +#define DMA4_CURR_X_COUNT 0xFFC00CF0 /* DMA2 Channel 3 Current Inner Loop Count */ +#define DMA4_CURR_Y_COUNT 0xFFC00CF8 /* DMA2 Channel 3 Current Outer Loop Count */ +#define DMA4_IRQ_STATUS 0xFFC00CE8 /* DMA2 Channel 3 Interrupt /Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00CEC /* DMA2 Channel 3 Peripheral Map Register */ + +#define DMA5_CONFIG 0xFFC00D08 /* DMA2 Channel 4 Configuration register */ +#define DMA5_NEXT_DESC_PTR 0xFFC00D00 /* DMA2 Channel 4 Next Descripter Ptr Reg */ +#define DMA5_START_ADDR 0xFFC00D04 /* DMA2 Channel 4 Start Address */ +#define DMA5_X_COUNT 0xFFC00D10 /* DMA2 Channel 4 Inner Loop Count */ +#define DMA5_Y_COUNT 0xFFC00D18 /* DMA2 Channel 4 Outer Loop Count */ +#define DMA5_X_MODIFY 0xFFC00D14 /* DMA2 Channel 4 Inner Loop Addr Increment */ +#define DMA5_Y_MODIFY 0xFFC00D1C /* DMA2 Channel 4 Outer Loop Addr Increment */ +#define DMA5_CURR_DESC_PTR 0xFFC00D20 /* DMA2 Channel 4 Current Descriptor Pointer */ +#define DMA5_CURR_ADDR 0xFFC00D24 /* DMA2 Channel 4 Current Address Pointer */ +#define DMA5_CURR_X_COUNT 0xFFC00D30 /* DMA2 Channel 4 Current Inner Loop Count */ +#define DMA5_CURR_Y_COUNT 0xFFC00D38 /* DMA2 Channel 4 Current Outer Loop Count */ +#define DMA5_IRQ_STATUS 0xFFC00D28 /* DMA2 Channel 4 Interrupt /Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D2C /* DMA2 Channel 4 Peripheral Map Register */ + +#define DMA6_CONFIG 0xFFC00D48 /* DMA2 Channel 5 Configuration register */ +#define DMA6_NEXT_DESC_PTR 0xFFC00D40 /* DMA2 Channel 5 Next Descripter Ptr Reg */ +#define DMA6_START_ADDR 0xFFC00D44 /* DMA2 Channel 5 Start Address */ +#define DMA6_X_COUNT 0xFFC00D50 /* DMA2 Channel 5 Inner Loop Count */ +#define DMA6_Y_COUNT 0xFFC00D58 /* DMA2 Channel 5 Outer Loop Count */ +#define DMA6_X_MODIFY 0xFFC00D54 /* DMA2 Channel 5 Inner Loop Addr Increment */ +#define DMA6_Y_MODIFY 0xFFC00D5C /* DMA2 Channel 5 Outer Loop Addr Increment */ +#define DMA6_CURR_DESC_PTR 0xFFC00D60 /* DMA2 Channel 5 Current Descriptor Pointer */ +#define DMA6_CURR_ADDR 0xFFC00D64 /* DMA2 Channel 5 Current Address Pointer */ +#define DMA6_CURR_X_COUNT 0xFFC00D70 /* DMA2 Channel 5 Current Inner Loop Count */ +#define DMA6_CURR_Y_COUNT 0xFFC00D78 /* DMA2 Channel 5 Current Outer Loop Count */ +#define DMA6_IRQ_STATUS 0xFFC00D68 /* DMA2 Channel 5 Interrupt /Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00D6C /* DMA2 Channel 5 Peripheral Map Register */ + +#define DMA7_CONFIG 0xFFC00D88 /* DMA2 Channel 6 Configuration register */ +#define DMA7_NEXT_DESC_PTR 0xFFC00D80 /* DMA2 Channel 6 Next Descripter Ptr Reg */ +#define DMA7_START_ADDR 0xFFC00D84 /* DMA2 Channel 6 Start Address */ +#define DMA7_X_COUNT 0xFFC00D90 /* DMA2 Channel 6 Inner Loop Count */ +#define DMA7_Y_COUNT 0xFFC00D98 /* DMA2 Channel 6 Outer Loop Count */ +#define DMA7_X_MODIFY 0xFFC00D94 /* DMA2 Channel 6 Inner Loop Addr Increment */ +#define DMA7_Y_MODIFY 0xFFC00D9C /* DMA2 Channel 6 Outer Loop Addr Increment */ +#define DMA7_CURR_DESC_PTR 0xFFC00DA0 /* DMA2 Channel 6 Current Descriptor Pointer */ +#define DMA7_CURR_ADDR 0xFFC00DA4 /* DMA2 Channel 6 Current Address Pointer */ +#define DMA7_CURR_X_COUNT 0xFFC00DB0 /* DMA2 Channel 6 Current Inner Loop Count */ +#define DMA7_CURR_Y_COUNT 0xFFC00DB8 /* DMA2 Channel 6 Current Outer Loop Count */ +#define DMA7_IRQ_STATUS 0xFFC00DA8 /* DMA2 Channel 6 Interrupt /Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DAC /* DMA2 Channel 6 Peripheral Map Register */ + +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status register */ + +/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */ +#define WDSIZE8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE32 0x00000008 /* Word Size 32 bits */ + +#endif /* _DEF_BF561_H */ diff --git a/include/asm-blackfin/arch-bf561/defBF561_extn.h b/include/asm-blackfin/arch-bf561/defBF561_extn.h new file mode 100644 index 0000000..b309b74 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/defBF561_extn.h @@ -0,0 +1,76 @@ +/* + * defBF561_extn.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _DEF_BF561_EXTN_H +#define _DEF_BF561_EXTN_H + +#define OFFSET_( x ) ((x) & 0x0000FFFF) /* define macro for offset */ +/* Delay inserted for PLL transition */ +#define PLL_DELAY 0x1000 + +#define L1_ISRAM 0xFFA00000 +#define L1_ISRAM_END 0xFFA10000 +#define DATA_BANKA_SRAM 0xFF800000 +#define DATA_BANKA_SRAM_END 0xFF808000 +#define DATA_BANKB_SRAM 0xFF900000 +#define DATA_BANKB_SRAM_END 0xFF908000 +#define SYSMMR_BASE 0xFFC00000 +#define WDSIZE16 0x00000004 + +/* Event Vector Table Address */ +#define EVT_EMULATION_ADDR 0xffe02000 +#define EVT_RESET_ADDR 0xffe02004 +#define EVT_NMI_ADDR 0xffe02008 +#define EVT_EXCEPTION_ADDR 0xffe0200c +#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010 +#define EVT_HARDWARE_ERROR_ADDR 0xffe02014 +#define EVT_TIMER_ADDR 0xffe02018 +#define EVT_IVG7_ADDR 0xffe0201c +#define EVT_IVG8_ADDR 0xffe02020 +#define EVT_IVG9_ADDR 0xffe02024 +#define EVT_IVG10_ADDR 0xffe02028 +#define EVT_IVG11_ADDR 0xffe0202c +#define EVT_IVG12_ADDR 0xffe02030 +#define EVT_IVG13_ADDR 0xffe02034 +#define EVT_IVG14_ADDR 0xffe02038 +#define EVT_IVG15_ADDR 0xffe0203c +#define EVT_OVERRIDE_ADDR 0xffe02100 + +/* IMASK Bit values */ +#define IVG15_POS 0x00008000 +#define IVG14_POS 0x00004000 +#define IVG13_POS 0x00002000 +#define IVG12_POS 0x00001000 +#define IVG11_POS 0x00000800 +#define IVG10_POS 0x00000400 +#define IVG9_POS 0x00000200 +#define IVG8_POS 0x00000100 +#define IVG7_POS 0x00000080 +#define IVGTMR_POS 0x00000040 +#define IVGHW_POS 0x00000020 + +#define WDOG_TMR_DISABLE (0xAD << 4) +#define ICTL_RST 0x00000000 +#define ICTL_NMI 0x00000002 +#define ICTL_GP 0x00000004 +#define ICTL_DISABLE 0x00000003 + +/* Watch Dog timer values setup */ +#define WATCHDOG_DISABLE WDOG_TMR_DISABLE | ICTL_DISABLE + +#endif /* _DEF_BF561_EXTN_H */ diff --git a/include/asm-blackfin/arch-bf561/irq.h b/include/asm-blackfin/arch-bf561/irq.h new file mode 100644 index 0000000..2f7dd99 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/irq.h @@ -0,0 +1,137 @@ +/* + * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * Changed by HuTao Apr18, 2003 + * + * Copyright was missing when I got the code so took from MIPS arch ...MaTed--- + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle + * + * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca> + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com> + * + * Adapted for BlackFin BF533 by Bas Vermeulen <bas@buyways.nl> + * Copyright (c) 2003 BuyWays B.V. (www.buyways.nl) + * Copyright (c) 2004 LG Soft India. + * Copyright (c) 2004 HHTech. + * + * Adapted for BlackFin BF561 by Bas Vermeulen <bas@buyways.nl> + * Copyright (c) 2005 BuyWays B.V. (www.buyways.nl) + */ + +#ifndef _BF561_IRQ_H_ +#define _BF561_IRQ_H_ + +/* + * Interrupt source definitions: + * Event Source Core Event Name IRQ No + * Emulation Events EMU 0 + * Reset RST 1 + * NMI NMI 2 + * Exception EVX 3 + * Reserved -- 4 + * Hardware Error IVHW 5 + * Core Timer IVTMR 6 + * + * PLL Wakeup Interrupt IVG7 7 + * DMA1 Error (generic) IVG7 8 + * DMA2 Error (generic) IVG7 9 + * IMDMA Error (generic) IVG7 10 + * PPI1 Error Interrupt IVG7 11 + * PPI2 Error Interrupt IVG7 12 + * SPORT0 Error Interrupt IVG7 13 + * SPORT1 Error Interrupt IVG7 14 + * SPI Error Interrupt IVG7 15 + * UART Error Interrupt IVG7 16 + * Reserved Interrupt IVG7 17 + * + * DMA1 0 Interrupt(PPI1) IVG8 18 + * DMA1 1 Interrupt(PPI2) IVG8 19 + * DMA1 2 Interrupt IVG8 20 + * DMA1 3 Interrupt IVG8 21 + * DMA1 4 Interrupt IVG8 22 + * DMA1 5 Interrupt IVG8 23 + * DMA1 6 Interrupt IVG8 24 + * DMA1 7 Interrupt IVG8 25 + * DMA1 8 Interrupt IVG8 26 + * DMA1 9 Interrupt IVG8 27 + * DMA1 10 Interrupt IVG8 28 + * DMA1 11 Interrupt IVG8 29 + * + * DMA2 0 (SPORT0 RX) IVG9 30 + * DMA2 1 (SPORT0 TX) IVG9 31 + * DMA2 2 (SPORT1 RX) IVG9 32 + * DMA2 3 (SPORT2 TX) IVG9 33 + * DMA2 4 (SPI) IVG9 34 + * DMA2 5 (UART RX) IVG9 35 + * DMA2 6 (UART TX) IVG9 36 + * DMA2 7 Interrupt IVG9 37 + * DMA2 8 Interrupt IVG9 38 + * DMA2 9 Interrupt IVG9 39 + * DMA2 10 Interrupt IVG9 40 + * DMA2 11 Interrupt IVG9 41 + * + * TIMER 0 Interrupt IVG10 42 + * TIMER 1 Interrupt IVG10 43 + * TIMER 2 Interrupt IVG10 44 + * TIMER 3 Interrupt IVG10 45 + * TIMER 4 Interrupt IVG10 46 + * TIMER 5 Interrupt IVG10 47 + * TIMER 6 Interrupt IVG10 48 + * TIMER 7 Interrupt IVG10 49 + * TIMER 8 Interrupt IVG10 50 + * TIMER 9 Interrupt IVG10 51 + * TIMER 10 Interrupt IVG10 52 + * TIMER 11 Interrupt IVG10 53 + * + * Programmable Flags0 A (8) IVG11 54 + * Programmable Flags0 B (8) IVG11 55 + * Programmable Flags1 A (8) IVG11 56 + * Programmable Flags1 B (8) IVG11 57 + * Programmable Flags2 A (8) IVG11 58 + * Programmable Flags2 B (8) IVG11 59 + * + * MDMA1 0 write/read INT IVG8 60 + * MDMA1 1 write/read INT IVG8 61 + * + * MDMA2 0 write/read INT IVG9 62 + * MDMA2 1 write/read INT IVG9 63 + * + * IMDMA 0 write/read INT IVG12 64 + * IMDMA 1 write/read INT IVG12 65 + * + * Watch Dog Timer IVG13 66 + * + * Reserved interrupt IVG7 67 + * Reserved interrupt IVG7 68 + * Supplemental interrupt 0 IVG7 69 + * supplemental interrupt 1 IVG7 70 + * + * Software Interrupt 1 IVG14 71 + * Software Interrupt 2 IVG15 72 + */ + +/* + * The ABSTRACT IRQ definitions + * the first seven of the following are fixed, + * the rest you change if you need to. + */ +/* IVG 0-6 */ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* Reset */ +#define IRQ_NMI 2 /* Non Maskable Interrupt */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* Reserved interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define IRQ_UART_RX_BIT 0x10000000 +#define IRQ_UART_TX_BIT 0x20000000 +#define IRQ_UART_ERROR_BIT 0x200 + +#endif /* _BF561_IRQ_H_ */ diff --git a/include/asm-blackfin/arch-common/bf53x_rtc.h b/include/asm-blackfin/arch-common/bf53x_rtc.h new file mode 100644 index 0000000..bc09922 --- /dev/null +++ b/include/asm-blackfin/arch-common/bf53x_rtc.h @@ -0,0 +1,46 @@ +/* + * U-boot - bf533_rtc.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF533_RTC_H_ +#define _BF533_RTC_H_ + +void rtc_init(void); +void wait_for_complete(void); +void rtc_reset(void); + +#define MIN_TO_SECS(_x_) (60 * _x_) +#define HRS_TO_SECS(_x_) (60 * 60 * _x_) +#define DAYS_TO_SECS(_x_) (24 * 60 * 60 * _x_) + +#define NUM_SECS_IN_DAY (24 * 3600) +#define NUM_SECS_IN_HOUR (3600) +#define NUM_SECS_IN_MIN (60) + +/* Shift values for RTC_STAT register */ +#define DAY_BITS_OFF 17 +#define HOUR_BITS_OFF 12 +#define MIN_BITS_OFF 6 +#define SEC_BITS_OFF 0 + +#endif diff --git a/include/asm-blackfin/arch-common/cdefBF5xx.h b/include/asm-blackfin/arch-common/cdefBF5xx.h new file mode 100644 index 0000000..aec70ce --- /dev/null +++ b/include/asm-blackfin/arch-common/cdefBF5xx.h @@ -0,0 +1,40 @@ +/************************************************************************ + * + * cdefBF53x.h + * + * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. + * + ************************************************************************/ + +#ifndef _CDEFBF53x_H +#define _CDEFBF53x_H + +#if defined(__ADSPBF531__) + #include <asm/arch-bf533/cdefBF531.h> +#elif defined(__ADSPBF532__) + #include <asm/arch-bf533/cdefBF532.h> +#elif defined(__ADSPBF533__) + #include <asm/arch-bf533/cdefBF533.h> + #include <asm/arch-bf533/defBF533_extn.h> + #include <asm/arch-bf533/bf533_serial.h> +#elif defined(__ADSPBF537__) + #include <asm/arch-bf537/cdefBF537.h> + #include <asm/arch-bf537/defBF537_extn.h> + #include <asm/arch-bf537/bf537_serial.h> +#elif defined(__ADSPBF561__) + #include <asm/arch-bf561/cdefBF561.h> + #include <asm/arch-bf561/defBF561_extn.h> + #include <asm/arch-bf561/bf561_serial.h> +#elif defined(__ADSPBF535__) + #include <asm/cpu/cdefBF5d35.h> +#elif defined(__AD6532__) + #include <asm/cpu/cdefAD6532.h> +#else + #if defined(__ADSPLPBLACKFIN__) + #include <asm/arch-bf533/cdefBF532.h> + #else + #include <asm/arch-bf533/cdefBF535.h> + #endif +#endif + +#endif /* _CDEFBF53x_H */ diff --git a/include/asm-blackfin/cpu/cdef_LPBlackfin.h b/include/asm-blackfin/arch-common/cdef_LPBlackfin.h index e6471cb..90b21e5 100644 --- a/include/asm-blackfin/cpu/cdef_LPBlackfin.h +++ b/include/asm-blackfin/arch-common/cdef_LPBlackfin.h @@ -1,38 +1,24 @@ -/* - * cdef_LPBlackfin.h - * - * This file is subject to the terms and conditions of the GNU Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Non-GPL License also available as part of VisualDSP++ +/************************************************************************ * - * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html - * - * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * cdef_LPBlackfin.h * - * This file under source code control, please send bugs or changes to: - * dsptools.support@analog.com + * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. * - */ + ************************************************************************/ #ifndef _CDEF_LPBLACKFIN_H #define _CDEF_LPBLACKFIN_H -/* - * #if !defined(__ADSPLPBLACKFIN__) - * #warning cdef_LPBlackfin.h should only be included for 532 compatible chips. - * #endif - */ -#include <asm/cpu/def_LPBlackfin.h> +#if !defined(__ADSPLPBLACKFIN__) +#warning cdef_LPBlackfin.h should only be included for 532 compatible chips. +#endif +#include <asm/arch-common/def_LPBlackfin.h> -/* Cache & SRAM Memory */ +/* Cache & SRAM Memory */ #define pSRAM_BASE_ADDRESS ((volatile void **)SRAM_BASE_ADDRESS) #define pDMEM_CONTROL ((volatile unsigned long *)DMEM_CONTROL) #define pDCPLB_STATUS ((volatile unsigned long *)DCPLB_STATUS) #define pDCPLB_FAULT_ADDR ((volatile void **)DCPLB_FAULT_ADDR) - -/* #define MMR_TIMEOUT 0xFFE00010 */ /* Memory-Mapped Register Timeout Register */ #define pDCPLB_ADDR0 ((volatile void **)DCPLB_ADDR0) #define pDCPLB_ADDR1 ((volatile void **)DCPLB_ADDR1) #define pDCPLB_ADDR2 ((volatile void **)DCPLB_ADDR2) @@ -66,15 +52,8 @@ #define pDCPLB_DATA14 ((volatile unsigned long *)DCPLB_DATA14) #define pDCPLB_DATA15 ((volatile unsigned long *)DCPLB_DATA15) #define pDTEST_COMMAND ((volatile unsigned long *)DTEST_COMMAND) - -/* #define DTEST_INDEX 0xFFE00304 */ /* Data Test Index Register */ #define pDTEST_DATA0 ((volatile unsigned long *)DTEST_DATA0) #define pDTEST_DATA1 ((volatile unsigned long *)DTEST_DATA1) - -/* - * # define DTEST_DATA2 0xFFE00408 Data Test Data Register - * #define DTEST_DATA3 0xFFE0040C Data Test Data Register - */ #define pIMEM_CONTROL ((volatile unsigned long *)IMEM_CONTROL) #define pICPLB_STATUS ((volatile unsigned long *)ICPLB_STATUS) #define pICPLB_FAULT_ADDR ((volatile void **)ICPLB_FAULT_ADDR) @@ -111,8 +90,6 @@ #define pICPLB_DATA14 ((volatile unsigned long *)ICPLB_DATA14) #define pICPLB_DATA15 ((volatile unsigned long *)ICPLB_DATA15) #define pITEST_COMMAND ((volatile unsigned long *)ITEST_COMMAND) - -/* #define ITEST_INDEX 0xFFE01304 */ /* Instruction Test Index Register */ #define pITEST_DATA0 ((volatile unsigned long *)ITEST_DATA0) #define pITEST_DATA1 ((volatile unsigned long *)ITEST_DATA1) @@ -180,6 +157,4 @@ #define pPFCNTR0 ((volatile unsigned long *)PFCNTR0) #define pPFCNTR1 ((volatile unsigned long *)PFCNTR1) -/* #define IPRIO 0xFFE02110 */ /* Core Interrupt Priority Register */ - -#endif /* _CDEF_LPBLACKFIN_H */ +#endif /* _CDEF_LPBLACKFIN_H */ diff --git a/include/asm-blackfin/cpu/def_LPBlackfin.h b/include/asm-blackfin/arch-common/def_LPBlackfin.h index 9ac78c8..ebeeea0 100644 --- a/include/asm-blackfin/cpu/def_LPBlackfin.h +++ b/include/asm-blackfin/arch-common/def_LPBlackfin.h @@ -92,13 +92,13 @@ /* ** Masks */ /* Exception cause */ -#define SEQSTAT_EXCAUSE MK_BMSK_(SEQSTAT_EXCAUSE0_P ) | \ +#define SEQSTAT_EXCAUSE ( MK_BMSK_(SEQSTAT_EXCAUSE0_P ) | \ MK_BMSK_(SEQSTAT_EXCAUSE1_P ) | \ MK_BMSK_(SEQSTAT_EXCAUSE2_P ) | \ MK_BMSK_(SEQSTAT_EXCAUSE3_P ) | \ MK_BMSK_(SEQSTAT_EXCAUSE4_P ) | \ MK_BMSK_(SEQSTAT_EXCAUSE5_P ) | \ - 0 + 0 ) /* Indicates whether the last reset was a software reset (=1) */ #define SEQSTAT_SFTRESET MK_BMSK_(SEQSTAT_SFTRESET_P ) diff --git a/include/asm-blackfin/bitops.h b/include/asm-blackfin/bitops.h index 65d2c25..7766c4a 100644 --- a/include/asm-blackfin/bitops.h +++ b/include/asm-blackfin/bitops.h @@ -59,7 +59,7 @@ static __inline__ unsigned long ffz(unsigned long word) static __inline__ void set_bit(int nr, volatile void *addr) { - int *a = (int *) addr; + int *a = (int *)addr; int mask; unsigned long flags; @@ -72,7 +72,7 @@ static __inline__ void set_bit(int nr, volatile void *addr) static __inline__ void __set_bit(int nr, volatile void *addr) { - int *a = (int *) addr; + int *a = (int *)addr; int mask; a += nr >> 5; @@ -88,7 +88,7 @@ static __inline__ void __set_bit(int nr, volatile void *addr) static __inline__ void clear_bit(int nr, volatile void *addr) { - int *a = (int *) addr; + int *a = (int *)addr; int mask; unsigned long flags; @@ -102,7 +102,7 @@ static __inline__ void clear_bit(int nr, volatile void *addr) static __inline__ void change_bit(int nr, volatile void *addr) { int mask, flags; - unsigned long *ADDR = (unsigned long *) addr; + unsigned long *ADDR = (unsigned long *)addr; ADDR += nr >> 5; mask = 1 << (nr & 31); @@ -114,7 +114,7 @@ static __inline__ void change_bit(int nr, volatile void *addr) static __inline__ void __change_bit(int nr, volatile void *addr) { int mask; - unsigned long *ADDR = (unsigned long *) addr; + unsigned long *ADDR = (unsigned long *)addr; ADDR += nr >> 5; mask = 1 << (nr & 31); @@ -124,7 +124,7 @@ static __inline__ void __change_bit(int nr, volatile void *addr) static __inline__ int test_and_set_bit(int nr, volatile void *addr) { int mask, retval; - volatile unsigned int *a = (volatile unsigned int *) addr; + volatile unsigned int *a = (volatile unsigned int *)addr; unsigned long flags; a += nr >> 5; @@ -140,7 +140,7 @@ static __inline__ int test_and_set_bit(int nr, volatile void *addr) static __inline__ int __test_and_set_bit(int nr, volatile void *addr) { int mask, retval; - volatile unsigned int *a = (volatile unsigned int *) addr; + volatile unsigned int *a = (volatile unsigned int *)addr; a += nr >> 5; mask = 1 << (nr & 0x1f); @@ -152,7 +152,7 @@ static __inline__ int __test_and_set_bit(int nr, volatile void *addr) static __inline__ int test_and_clear_bit(int nr, volatile void *addr) { int mask, retval; - volatile unsigned int *a = (volatile unsigned int *) addr; + volatile unsigned int *a = (volatile unsigned int *)addr; unsigned long flags; a += nr >> 5; @@ -168,7 +168,7 @@ static __inline__ int test_and_clear_bit(int nr, volatile void *addr) static __inline__ int __test_and_clear_bit(int nr, volatile void *addr) { int mask, retval; - volatile unsigned int *a = (volatile unsigned int *) addr; + volatile unsigned int *a = (volatile unsigned int *)addr; a += nr >> 5; mask = 1 << (nr & 0x1f); @@ -180,7 +180,7 @@ static __inline__ int __test_and_clear_bit(int nr, volatile void *addr) static __inline__ int test_and_change_bit(int nr, volatile void *addr) { int mask, retval; - volatile unsigned int *a = (volatile unsigned int *) addr; + volatile unsigned int *a = (volatile unsigned int *)addr; unsigned long flags; a += nr >> 5; @@ -196,7 +196,7 @@ static __inline__ int test_and_change_bit(int nr, volatile void *addr) static __inline__ int __test_and_change_bit(int nr, volatile void *addr) { int mask, retval; - volatile unsigned int *a = (volatile unsigned int *) addr; + volatile unsigned int *a = (volatile unsigned int *)addr; a += nr >> 5; mask = 1 << (nr & 0x1f); @@ -208,16 +208,15 @@ static __inline__ int __test_and_change_bit(int nr, volatile void *addr) /* * This routine doesn't need to be atomic. */ -static __inline__ int __constant_test_bit(int nr, - const volatile void *addr) +static __inline__ int __constant_test_bit(int nr, const volatile void *addr) { return ((1UL << (nr & 31)) & - (((const volatile unsigned int *) addr)[nr >> 5])) != 0; + (((const volatile unsigned int *)addr)[nr >> 5])) != 0; } static __inline__ int __test_bit(int nr, volatile void *addr) { - int *a = (int *) addr; + int *a = (int *)addr; int mask; a += nr >> 5; @@ -235,7 +234,7 @@ static __inline__ int __test_bit(int nr, volatile void *addr) static __inline__ int find_next_zero_bit(void *addr, int size, int offset) { - unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long *p = ((unsigned long *)addr) + (offset >> 5); unsigned long result = offset & ~31UL; unsigned long tmp; @@ -290,7 +289,7 @@ static __inline__ int ext2_set_bit(int nr, volatile void *addr) { int mask, retval; unsigned long flags; - volatile unsigned char *ADDR = (unsigned char *) addr; + volatile unsigned char *ADDR = (unsigned char *)addr; ADDR += nr >> 3; mask = 1 << (nr & 0x07); @@ -305,7 +304,7 @@ static __inline__ int ext2_clear_bit(int nr, volatile void *addr) { int mask, retval; unsigned long flags; - volatile unsigned char *ADDR = (unsigned char *) addr; + volatile unsigned char *ADDR = (unsigned char *)addr; ADDR += nr >> 3; mask = 1 << (nr & 0x07); @@ -319,7 +318,7 @@ static __inline__ int ext2_clear_bit(int nr, volatile void *addr) static __inline__ int ext2_test_bit(int nr, const volatile void *addr) { int mask; - const volatile unsigned char *ADDR = (const unsigned char *) addr; + const volatile unsigned char *ADDR = (const unsigned char *)addr; ADDR += nr >> 3; mask = 1 << (nr & 0x07); @@ -331,10 +330,9 @@ static __inline__ int ext2_test_bit(int nr, const volatile void *addr) static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, - unsigned long - offset) + unsigned long offset) { - unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long *p = ((unsigned long *)addr) + (offset >> 5); unsigned long result = offset & ~31UL; unsigned long tmp; diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h index fbdbf30..0ec9207 100644 --- a/include/asm-blackfin/blackfin.h +++ b/include/asm-blackfin/blackfin.h @@ -25,22 +25,16 @@ #ifndef _BLACKFIN_H_ #define _BLACKFIN_H_ -#include <asm/cpu/defBF533.h> -#include <asm/cpu/bf533_serial.h> +#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY)) +# ifdef SHARED_RESOURCES +# include <asm/shared_resources.h> +# endif -#ifndef __ASSEMBLY__ -#ifndef ASSEMBLY +# include <linux/types.h> -#ifdef SHARED_RESOURCES - #include <asm/shared_resources.h> +extern u_long get_sclk(void); #endif -#include <asm/cpu/cdefBF53x.h> -#endif -#endif - -#include <asm/cpu/defBF533.h> -#include <asm/cpu/defBF533_extn.h> -#include <asm/cpu/bf533_serial.h> +#include <asm/arch-common/cdefBF5xx.h> #endif diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h index 7715f64..dd695e1 100644 --- a/include/asm-blackfin/cplb.h +++ b/include/asm-blackfin/cplb.h @@ -7,14 +7,15 @@ ************************************************************************/ /* Defines necessary for cplb initialisation routines. */ - #ifndef _CPLB_H #define _CPLB_H +#define CONFIG_BLKFIN_WT + #define CPLB_ENABLE_ICACHE_P 0 #define CPLB_ENABLE_DCACHE_P 1 #define CPLB_ENABLE_DCACHE2_P 2 -#define CPLB_ENABLE_CPLBS_P 3 /* Deprecated!*/ +#define CPLB_ENABLE_CPLBS_P 3 /* Deprecated! */ #define CPLB_ENABLE_ICPLBS_P 4 #define CPLB_ENABLE_DCPLBS_P 5 @@ -45,4 +46,35 @@ #define CPLB_INOCACHE CPLB_USER_RD | CPLB_VALID #define CPLB_IDOCACHE CPLB_INOCACHE | CPLB_L1_CHBL -#endif /* _CPLB_H */ +/* Data Attibutes*/ + +#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) +#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158 0x200 + +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) + +#else /*Write Through */ +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) +#endif + +#if defined(CONFIG_BF561) +#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2) /* SDRAM +L1 + ASYNC_Memory */ +#else +#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 3) /* SDRAM + L1 + ASYNC_Memory */ +#endif +#endif /* _CPLB_H */ diff --git a/include/asm-blackfin/cplbtab.h b/include/asm-blackfin/cplbtab.h deleted file mode 100644 index ab7d989..0000000 --- a/include/asm-blackfin/cplbtab.h +++ /dev/null @@ -1,572 +0,0 @@ -/*This file is subject to the terms and conditions of the GNU General Public - * License. - * - * Blackfin BF533/2.6 support : LG Soft India - * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd - * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's - * shouldn't be victimized. cplbmgr.S search logic is corrected - * to findout the appropriate victim. - * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC - * : LG Soft India - */ -#include <config.h> - -#ifndef __ARCH_BFINNOMMU_CPLBTAB_H -#define __ARCH_BFINNOMMU_CPLBTAB_H - -/************************************************************************* - * ICPLB TABLE - *************************************************************************/ - -.data - -/* This table is configurable */ - -.align 4; - -/* Data Attibutes*/ - -#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) -#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ - #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) - #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) - #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) - #define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) - #define SDRAM_EBIU (PAGE_SIZE_1MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) - -#else /*Write Through*/ - #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) - #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) - #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) - #define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) - #define SDRAM_EBIU (PAGE_SIZE_1MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) -#endif - -.global icplb_table -icplb_table: -.byte4 0xFFA00000; -.byte4 (L1_IMEMORY); -.byte4 0x00000000; -.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/ -.byte4 0x00400000; -.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/ -.byte4 0x07C00000; -.byte4 (SDRAM_IKERNEL); /*SDRAM_Page14*/ -.byte4 0x00800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page2*/ -.byte4 0x00C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page2*/ -.byte4 0x01000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page4*/ -.byte4 0x01400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page5*/ -.byte4 0x01800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page6*/ -.byte4 0x01C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page7*/ -#ifndef CONFIG_EZKIT /*STAMP Memory regions*/ -.byte4 0x02000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page8*/ -.byte4 0x02400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page9*/ -.byte4 0x02800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page10*/ -.byte4 0x02C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page11*/ -.byte4 0x03000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page12*/ -.byte4 0x03400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page13*/ -#endif -.byte4 0xffffffff; /* end of section - termination*/ - -.align 4; -.global ipdt_table -ipdt_table: -#ifdef CONFIG_CPLB_INFO -.byte4 0x00000000; -.byte4 (SDRAM_IKERNEL); /*SDRAM_Page0*/ -.byte4 0x00400000; -.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/ -#endif -.byte4 0x00800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page2*/ -.byte4 0x00C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page3*/ -.byte4 0x01000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page4*/ -.byte4 0x01400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page5*/ -.byte4 0x01800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page6*/ -.byte4 0x01C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page7*/ -#ifndef CONFIG_EZKIT /*STAMP Memory regions*/ -.byte4 0x02000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page8*/ -.byte4 0x02400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page9*/ -.byte4 0x02800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page10*/ -.byte4 0x02C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page11*/ -.byte4 0x03000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page12*/ -.byte4 0x03400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page13*/ -.byte4 0x03800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page14*/ -.byte4 0x03C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page15*/ -#endif -.byte4 0x20200000; -.byte4 (SDRAM_EBIU); /* Async Memory Bank 2 (Secnd)*/ -.byte4 0x20100000; -.byte4 (SDRAM_EBIU); /* Async Memory Bank 1 (Prim B)*/ -.byte4 0x20000000; -.byte4 (SDRAM_EBIU); /* Async Memory Bank 0 (Prim A)*/ -.byte4 0x20300000; /*Fix for Network*/ -.byte4 (SDRAM_EBIU); /*Async Memory bank 3*/ - -#ifdef CONFIG_STAMP -.byte4 0x04000000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x04400000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x04800000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x04C00000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x05000000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x05400000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x05800000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x05C00000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x06000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page25*/ -.byte4 0x06400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page26*/ -.byte4 0x06800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page27*/ -.byte4 0x06C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page28*/ -.byte4 0x07000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page29*/ -.byte4 0x07400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page30*/ -.byte4 0x07800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page31*/ -#ifdef CONFIG_CPLB_INFO -.byte4 0x07C00000; -.byte4 (SDRAM_IKERNEL); /*SDRAM_Page32*/ -#endif -#endif -.byte4 0xffffffff; /* end of section - termination*/ - -/********************************************************************* - * DCPLB TABLE - ********************************************************************/ - -.global dcplb_table -dcplb_table: -.byte4 0x00000000; -.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/ -.byte4 0x00400000; -.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/ -.byte4 0x07C00000; -.byte4 (SDRAM_DKERNEL); /*SDRAM_Page15*/ -.byte4 0x00800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page2*/ -.byte4 0x00C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page3*/ -.byte4 0x01000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page4*/ -.byte4 0x01400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page5*/ -.byte4 0x01800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page6*/ -.byte4 0x01C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page7*/ -#ifndef CONFIG_EZKIT -.byte4 0x02000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page8*/ -.byte4 0x02400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page9*/ -.byte4 0x02800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page10*/ -.byte4 0x02C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page11*/ -.byte4 0x03000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page12*/ -.byte4 0x03400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page13*/ -.byte4 0x03800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page14*/ -#endif -.byte4 0xffffffff; /*end of section - termination*/ - -/********************************************************************** - * PAGE DESCRIPTOR TABLE - * - **********************************************************************/ - -/* Till here we are discussing about the static memory management model. - * However, the operating envoronments commonly define more CPLB - * descriptors to cover the entire addressable memory than will fit into - * the available on-chip 16 CPLB MMRs. When this happens, the below table - * will be used which will hold all the potentially required CPLB descriptors - * - * This is how Page descriptor Table is implemented in uClinux/Blackfin. - */ -.global dpdt_table -dpdt_table: -#ifdef CONFIG_CPLB_INFO -.byte4 0x00000000; -.byte4 (SDRAM_DKERNEL); /*SDRAM_Page0*/ -.byte4 0x00400000; -.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/ -#endif -.byte4 0x00800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page2*/ -.byte4 0x00C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page3*/ -.byte4 0x01000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page4*/ -.byte4 0x01400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page5*/ -.byte4 0x01800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page6*/ -.byte4 0x01C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page7*/ - -#ifndef CONFIG_EZKIT -.byte4 0x02000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page8*/ -.byte4 0x02400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page9*/ -.byte4 0x02800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page10*/ -.byte4 0x02C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page11*/ -.byte4 0x03000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page12*/ -.byte4 0x03400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page13*/ -.byte4 0x03800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page14*/ -.byte4 0x03C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page15*/ -#endif -.byte4 0x20200000; -.byte4 (SDRAM_EBIU); /* Async Memory Bank 2 (Secnd)*/ -.byte4 0x20100000; -.byte4 (SDRAM_EBIU); /* Async Memory Bank 1 (Prim B)*/ -.byte4 0x20000000; -.byte4 (SDRAM_EBIU); /* Async Memory Bank 0 (Prim A)*/ -.byte4 0x20300000; /*Fix for Network*/ -.byte4 (SDRAM_EBIU); /*Async Memory bank 3*/ - -#ifdef CONFIG_STAMP -.byte4 0x04000000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x04400000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x04800000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x04C00000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x05000000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x05400000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x05800000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x05C00000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x06000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page25*/ -.byte4 0x06400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page26*/ -.byte4 0x06800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page27*/ -.byte4 0x06C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page28*/ -.byte4 0x07000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page29*/ -.byte4 0x07400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page30*/ -.byte4 0x07800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page31*/ -#ifdef CONFIG_CPLB_INFO -.byte4 0x07C00000; -.byte4 (SDRAM_DKERNEL); /*SDRAM_Page32*/ -#endif -#endif - -.byte4 0xFF900000; -.byte4 (L1_DMEMORY); -.byte4 0xFF901000; -.byte4 (L1_DMEMORY); -.byte4 0xFF902000; -.byte4 (L1_DMEMORY); -.byte4 0xFF903000; -.byte4 (L1_DMEMORY); -.byte4 0xFF904000; -.byte4 (L1_DMEMORY); -.byte4 0xFF905000; -.byte4 (L1_DMEMORY); -.byte4 0xFF906000; -.byte4 (L1_DMEMORY); -.byte4 0xFF907000; -.byte4 (L1_DMEMORY); -.byte4 0xFF800000; -.byte4 (L1_DMEMORY); -.byte4 0xFF801000; -.byte4 (L1_DMEMORY); -.byte4 0xFF802000; -.byte4 (L1_DMEMORY); -.byte4 0xFF803000; -.byte4 (L1_DMEMORY); - -.byte4 0xffffffff; /*end of section - termination*/ - -#ifdef CONFIG_CPLB_INFO -.global ipdt_swapcount_table; /* swapin count first, then swapout count*/ -ipdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 90 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ - -.global dpdt_swapcount_table; /* swapin count first, then swapout count*/ -dpdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 110 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 120 */ - -#endif - -#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/cpu/cdefBF53x.h b/include/asm-blackfin/cpu/cdefBF53x.h deleted file mode 100644 index db4eaa9..0000000 --- a/include/asm-blackfin/cpu/cdefBF53x.h +++ /dev/null @@ -1,32 +0,0 @@ -/************************************************************************ - * - * cdefBF53x.h - * - * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. - * - ************************************************************************/ - -#ifndef _CDEFBF53x_H -#define _CDEFBF53x_H - -#if defined(__ADSPBF531__) - #include <asm/cpu/cdefBF531.h> -#elif defined(__ADSPBF532__) - #include <asm/cpu/cdefBF532.h> -#elif defined(__ADSPBF533__) - #include <asm/cpu/cdefBF533.h> -#elif defined(__ADSPBF561__) - #include <asm/cpu/cdefBF561.h> -#elif defined(__ADSPBF535__) - #include <asm/cpu/cdefBF535.h> -#elif defined(__AD6532__) - #include <sam/cpu/cdefAD6532.h> -#else - #if defined(__ADSPLPBLACKFIN__) - #include <asm/cpu/cdefBF532.h> - #else - #include <asm/cpu/cdefBF535.h> - #endif -#endif - -#endif /* _CDEFBF53x_H */ diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h index dbb7388..0c01e9f 100644 --- a/include/asm-blackfin/delay.h +++ b/include/asm-blackfin/delay.h @@ -35,9 +35,9 @@ extern __inline__ void __delay(unsigned long loops) { __asm__ __volatile__("1:\t%0 += -1;\n\t" - "cc = %0 == 0;\n\t" - "if ! cc jump 1b;\n":"=d"(loops) - :"0"(loops)); + "cc = %0 == 0;\n\t" + "if ! cc jump 1b;\n":"=d"(loops) + :"0"(loops)); } /* diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h index 607a5b8..b64d406 100644 --- a/include/asm-blackfin/entry.h +++ b/include/asm-blackfin/entry.h @@ -370,16 +370,12 @@ #define STR1(X) #X #if defined(NEW_PT_REGS) - #define PT_OFF_ORIG_R0 208 #define PT_OFF_SR 8 - #else - #define PT_OFF_ORIG_R0 0x54 #define PT_OFF_SR 0x38 /* seqstat in pt_regs */ - -#endif #endif #endif +#endif diff --git a/include/asm-blackfin/global_data.h b/include/asm-blackfin/global_data.h index 56a12f0..1c73853 100644 --- a/include/asm-blackfin/global_data.h +++ b/include/asm-blackfin/global_data.h @@ -45,11 +45,16 @@ typedef struct global_data { unsigned long board_type; unsigned long baudrate; unsigned long have_console; /* serial_init() was called */ - unsigned long ram_size; /* RAM size */ + unsigned long ram_size; /* RAM size */ unsigned long reloc_off; /* Relocation Offset */ - unsigned long env_addr; /* Address of Environment struct */ + unsigned long env_addr; /* Address of Environment struct */ unsigned long env_valid; /* Checksum of Environment valid? */ - void **jt; /* jump table */ +#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) + unsigned long post_log_word; /* Record POST activities */ + unsigned long post_init_f_time; /* When post_init_f started */ +#endif + + void **jt; /* jump table */ } gd_t; /* @@ -59,6 +64,6 @@ typedef struct global_data { #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ -#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("P5") +#define DECLARE_GLOBAL_DATA_PTR register gd_t * volatile gd asm ("P5") #endif diff --git a/include/asm-blackfin/hw_irq.h b/include/asm-blackfin/hw_irq.h index 1ee050e..baa3e0c 100644 --- a/include/asm-blackfin/hw_irq.h +++ b/include/asm-blackfin/hw_irq.h @@ -30,8 +30,14 @@ #include <linux/config.h> #ifdef CONFIG_EZKIT533 -#include <asm/board/bf533_irq.h> +#include <asm/arch-bf533/irq.h> +#endif +#ifdef CONFIG_EZKIT561 +#include <asm/arch-bf561/irq.h> #endif #ifdef CONFIG_STAMP -#include <asm/board/bf533_irq.h> +#include <asm/arch-bf533/irq.h> +#endif +#ifdef CONFIG_BF537 +#include <asm/arch-bf537/irq.h> #endif diff --git a/include/asm-blackfin/io-kernel.h b/include/asm-blackfin/io-kernel.h index 0b0572f..3c087c3 100644 --- a/include/asm-blackfin/io-kernel.h +++ b/include/asm-blackfin/io-kernel.h @@ -87,7 +87,8 @@ #define IOMAP_WRITETHROUGH 3 #ifndef __ASSEMBLY__ -extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); +extern void *__ioremap(unsigned long physaddr, unsigned long size, + int cacheflag); extern void __iounmap(void *addr, unsigned long size); extern inline void *ioremap(unsigned long physaddr, unsigned long size) { @@ -97,11 +98,13 @@ extern inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) { return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); } -extern inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size) +extern inline void *ioremap_writethrough(unsigned long physaddr, + unsigned long size) { return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); } -extern inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) +extern inline void *ioremap_fullcache(unsigned long physaddr, + unsigned long size) { return __ioremap(physaddr, size, IOMAP_FULL_CACHING); } diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index fc27194..6bab6e7 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -25,11 +25,6 @@ #ifndef _BLACKFIN_IO_H #define _BLACKFIN_IO_H -static inline void sync(void) -{ - __asm__ __volatile__ asm("ssync" : : : "memory"); -} - #ifdef __KERNEL__ #include <linux/config.h> @@ -38,7 +33,11 @@ static inline void sync(void) extern void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words); extern void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words); extern unsigned char cf_inb(volatile unsigned char *addr); -extern void cf_outb(unsigned char val, volatile unsigned char* addr); +extern void cf_outb(unsigned char val, volatile unsigned char *addr); + +static inline void sync(void) +{ +} /* * These are for ISA/PCI shared memory _only_ and should never be used @@ -51,7 +50,6 @@ extern void cf_outb(unsigned char val, volatile unsigned char* addr); * memory location directly. */ - #define readb(addr) ({ unsigned char __v = (*(volatile unsigned char *) (addr));asm("ssync;"); __v; }) #define readw(addr) ({ unsigned short __v = (*(volatile unsigned short *) (addr)); asm("ssync;");__v; }) #define readl(addr) ({ unsigned int __v = (*(volatile unsigned int *) (addr));asm("ssync;"); __v; }) @@ -100,8 +98,7 @@ extern inline void *ioremap(unsigned long physaddr, unsigned long size) { return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); } -extern inline void *ioremap_nocache(unsigned long physaddr, - unsigned long size) +extern inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) { return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); } diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h index 5fbc5a3..aede742 100644 --- a/include/asm-blackfin/irq.h +++ b/include/asm-blackfin/irq.h @@ -39,7 +39,7 @@ #define _BLACKFIN_IRQ_H_ #include <linux/config.h> -#include <asm/cpu/bf533_irq.h> +#include <asm/hw_irq.h> /* * On the Blackfin, the interrupt structure allows remmapping of the hardware @@ -85,8 +85,8 @@ static __inline__ int irq_cannonicalize(int irq) extern void (*mach_enable_irq) (unsigned int); extern void (*mach_disable_irq) (unsigned int); extern int sys_request_irq(unsigned int, - void (*)(int, void *, struct pt_regs *), - unsigned long, const char *, void *); + void (*)(int, void *, struct pt_regs *), + unsigned long, const char *, void *); extern void sys_free_irq(unsigned int, void *); /* diff --git a/include/asm-blackfin/machdep.h b/include/asm-blackfin/machdep.h index 0a43ba1..4fea74c 100644 --- a/include/asm-blackfin/machdep.h +++ b/include/asm-blackfin/machdep.h @@ -39,7 +39,8 @@ struct hwclk_time; struct gendisk; struct buffer_head; -extern void (*mach_sched_init) (void (*handler) (int, void *, struct pt_regs *)); +extern + void (*mach_sched_init) (void (*handler) (int, void *, struct pt_regs *)); /* machine dependent keyboard functions */ extern int (*mach_keyb_init) (void); diff --git a/include/asm-blackfin/mem_init.h b/include/asm-blackfin/mem_init.h index 1a13d90..d9d8bf9 100644 --- a/include/asm-blackfin/mem_init.h +++ b/include/asm-blackfin/mem_init.h @@ -22,7 +22,13 @@ * MA 02111-1307 USA */ -#if ( CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E ) +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || \ + CONFIG_MEM_MT48LC64M4A2FB_7E || \ + CONFIG_MEM_MT48LC16M8A2TG_75 || \ + CONFIG_MEM_MT48LC8M16A2TG_7E || \ + CONFIG_MEM_MT48LC8M32B2B5_7 || \ + CONFIG_MEM_MT48LC32M8A2_75) + #if ( CONFIG_SCLK_HZ > 119402985 ) #define SDRAM_tRP TRP_2 #define SDRAM_tRP_num 2 @@ -66,7 +72,7 @@ #if ( CONFIG_SCLK_HZ > 59701493 ) && ( CONFIG_SCLK_HZ <= 66666667 ) #define SDRAM_tRP TRP_1 #define SDRAM_tRP_num 1 - #define SDRAM_tRAS TRAS_4 + #define SDRAM_tRAS TRAS_3 #define SDRAM_tRAS_num 3 #define SDRAM_tRCD TRCD_1 #define SDRAM_tWR TWR_2 @@ -99,18 +105,46 @@ #if (CONFIG_MEM_MT48LC16M16A2TG_75) /*SDRAM INFORMATION: */ - #define SDRAM_Tref 64 /* Refresh period in milliseconds */ - #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ #define SDRAM_CL CL_3 #endif #if (CONFIG_MEM_MT48LC64M4A2FB_7E) /*SDRAM INFORMATION: */ - #define SDRAM_Tref 64 /* Refresh period in milliseconds */ - #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ + #define SDRAM_CL CL_2 +#endif + +#if (CONFIG_MEM_MT48LC16M8A2TG_75) + /*SDRAM INFORMATION: */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ + #define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC32M8A2_75) +/*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC8M16A2TG_7E) + /*SDRAM INFORMATION: */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ #define SDRAM_CL CL_2 #endif +#if (CONFIG_MEM_MT48LC8M32B2B5_7) + /*SDRAM INFORMATION: */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ + #define SDRAM_CL CL_3 +#endif + #if ( CONFIG_MEM_SIZE == 128 ) #define SDRAM_SIZE EBSZ_128 #endif diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h index 406ece5..d59828c 100644 --- a/include/asm-blackfin/page.h +++ b/include/asm-blackfin/page.h @@ -112,11 +112,6 @@ extern __inline__ int get_order(unsigned long size) #define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) #define VALID_PAGE(page) ((page - mem_map) < max_mapnr) -#define BUG() do { \ - \ - while (1); /* dead-loop */ \ -} while (0) - #define PAGE_BUG(page) do { \ BUG(); \ } while (0) diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h index 19bd720..df49bed 100644 --- a/include/asm-blackfin/processor.h +++ b/include/asm-blackfin/processor.h @@ -126,8 +126,7 @@ static inline void release_thread(struct task_struct *dead_task) { } -extern int kernel_thread(int (*fn) (void *), void *arg, - unsigned long flags); +extern int kernel_thread(int (*fn) (void *), void *arg, unsigned long flags); #define copy_segments(tsk, mm) do { } while (0) #define release_segments(mm) do { } while (0) diff --git a/include/asm-blackfin/setup.h b/include/asm-blackfin/setup.h index 6ce9688..a3c1715 100644 --- a/include/asm-blackfin/setup.h +++ b/include/asm-blackfin/setup.h @@ -75,12 +75,13 @@ extern unsigned long vme_brdtype; extern int blackfin_num_memory; /* # of memory blocks found (and used) */ extern int blackfin_realnum_memory; /* real # of memory blocks found */ -extern struct mem_info blackfin_memory[NUM_MEMINFO]; /* memory description */ struct mem_info { unsigned long addr; /* physical address of memory chunk */ unsigned long size; /* length of memory chunk (in bytes) */ }; + +extern struct mem_info blackfin_memory[NUM_MEMINFO]; /* memory description */ #endif #endif diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h index ffd81d6..aac6bc9 100644 --- a/include/asm-blackfin/string.h +++ b/include/asm-blackfin/string.h @@ -31,21 +31,26 @@ #include <asm/setup.h> #include <asm/page.h> -#include <asm/cpu/defBF533.h> +#include <config.h> +#include <asm/blackfin.h> #define __HAVE_ARCH_STRCPY #define __HAVE_ARCH_STRNCPY #define __HAVE_ARCH_STRCMP #define __HAVE_ARCH_STRNCMP #define __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMCMP +#define __HAVE_ARCH_MEMSET +#define __HAVE_ARCH_MEMMOVE extern char *strcpy(char *dest, const char *src); extern char *strncpy(char *dest, const char *src, size_t n); extern int strcmp(const char *cs, const char *ct); extern int strncmp(const char *cs, const char *ct, size_t count); -extern void * memcpy(void * dest,const void *src,size_t count); +extern void *memcpy(void *dest, const void *src, size_t count); extern void *memset(void *s, int c, size_t count); extern int memcmp(const void *, const void *, __kernel_size_t); +extern void *memmove(void *dest, const void *src, size_t count); #else /* KERNEL */ diff --git a/include/asm-blackfin/u-boot.h b/include/asm-blackfin/u-boot.h index ec39338..e1a435a 100644 --- a/include/asm-blackfin/u-boot.h +++ b/include/asm-blackfin/u-boot.h @@ -29,7 +29,7 @@ #define _U_BOOT_H_ 1 typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + int bi_baudrate; /* serial console baudrate */ unsigned long bi_ip_addr; /* IP Address */ unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned long bi_arch_number; /* unique id for this board */ diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h index 8578166..61e2bfe 100644 --- a/include/asm-blackfin/uaccess.h +++ b/include/asm-blackfin/uaccess.h @@ -41,11 +41,10 @@ /* We let the MMU do all checking */ static inline int access_ok(int type, const void *addr, unsigned long size) { - return ((unsigned long) addr < 0x10f00000); /* need final decision - Tony */ + return ((unsigned long)addr < 0x10f00000); /* need final decision - Tony */ } -static inline int verify_area(int type, const void *addr, - unsigned long size) +static inline int verify_area(int type, const void *addr, unsigned long size) { return access_ok(type, addr, size) ? 0 : -EFAULT; } @@ -173,12 +172,11 @@ static inline int bad_user_access_length(void) * Copy a null terminated string from userspace. */ -static inline long strncpy_from_user(char *dst, const char *src, - long count) +static inline long strncpy_from_user(char *dst, const char *src, long count) { char *tmp; strncpy(dst, src, count); - for (tmp = dst; *tmp && count > 0; tmp++, count--); + for (tmp = dst; *tmp && count > 0; tmp++, count--) ; return (tmp - dst); /* DAVIDM should we count a NUL ? check getname */ } diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h index 79dcae4..ff9512f 100644 --- a/include/asm-ppc/e300.h +++ b/include/asm-ppc/e300.h @@ -15,6 +15,11 @@ #define PVR_8360_REV10 (PVR_83xx | 0x0020) #define PVR_8360_REV11 (PVR_83xx | 0x0020) +#if defined(CONFIG_MPC832X) +#undef PVR_83xx +#define PVR_83xx 0x80840000 +#endif + /* * Hardware Implementation-Dependent Register 0 (HID0) */ diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index 8bc61b6..c113b7e 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -52,12 +52,12 @@ typedef struct global_data { #if defined(CONFIG_MPC83XX) /* There are other clocks in the MPC83XX */ u32 csb_clk; -#if defined (CONFIG_MPC8349) +#if defined (CONFIG_MPC834X) u32 tsec1_clk; u32 tsec2_clk; u32 usbmph_clk; u32 usbdr_clk; -#endif /* CONFIG_MPC8349 */ +#endif /* CONFIG_MPC834X */ u32 core_clk; u32 i2c1_clk; u32 i2c2_clk; diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 43cde5e..5e088d6 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -3,20 +3,11 @@ * * MPC83xx Internal Memory Map * - * History : - * 20060601: Daveliu (daveliu@freescale.com) - * TanyaJiang (tanya.jiang@freescale.com) - * Unified variable names for mpc83xx - * 2005 : Mandy Lavi (mandy.lavi@freescale.com) - * support for mpc8360e - * 2004 : Eran Liberty (liberty@freescale.com) - * Initialized for mpc8349 - * based on: - * MPC8260 Internal Memory Map - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) - * MPC85xx Internal Memory Map - * Copyright(c) 2002,2003 Motorola Inc. - * Xianghua Xiao (x.xiao@motorola.com) + * Contributors: + * Dave Liu <daveliu@freescale.com> + * Tanya Jiang <tanya.jiang@freescale.com> + * Mandy Lavi <mandy.lavi@freescale.com> + * Eran Liberty <liberty@freescale.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -25,7 +16,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -37,36 +28,24 @@ #ifndef __IMMAP_83xx__ #define __IMMAP_83xx__ -#include <config.h> #include <asm/types.h> #include <asm/fsl_i2c.h> /* - * Local Access Window. + * Local Access Window */ typedef struct law83xx { u32 bar; /* LBIU local access window base address register */ -/* Identifies the 20 most-significant address bits of the base of local - * access window n. The specified base address should be aligned to the - * window size, as defined by LBLAWARn[SIZE]. - */ -#define LAWBAR_BAR 0xFFFFF000 -#define LAWBAR_RES ~(LAWBAR_BAR) u32 ar; /* LBIU local access window attribute register */ } law83xx_t; /* - * System configuration registers. + * System configuration registers */ typedef struct sysconf83xx { u32 immrbar; /* Internal memory map base address register */ u8 res0[0x04]; u32 altcbar; /* Alternate configuration base address register */ -/* Identifies the12 most significant address bits of an alternate base - * address used for boot sequencer configuration accesses. - */ -#define ALTCBAR_BASE_ADDR 0xFFF00000 -#define ALTCBAR_RES ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */ u8 res1[0x14]; law83xx_t lblaw[4]; /* LBIU local access window */ u8 res2[0x20]; @@ -77,116 +56,14 @@ typedef struct sysconf83xx { u32 sgprl; /* System General Purpose Register Low */ u32 sgprh; /* System General Purpose Register High */ u32 spridr; /* System Part and Revision ID Register */ -#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification. */ -#define SPRIDR_REVID 0x0000FFFF /* Revision Identification. */ u8 res5[0x04]; u32 spcr; /* System Priority Configuration Register */ -#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable. */ -#define SPCR_PCIHPE_SHIFT (31-3) -#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority. */ -#define SPCR_PCIPR_SHIFT (31-7) -#define SPCR_OPT 0x00800000 /* Optimize */ -#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable. */ -#define SPCR_TBEN_SHIFT (31-9) -#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority. */ -#define SPCR_COREPR_SHIFT (31-11) -#if defined (CONFIG_MPC8349) -#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority. */ -#define SPCR_TSEC1DP_SHIFT (31-19) -#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */ -#define SPCR_TSEC1BDP_SHIFT (31-21) -#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority. */ -#define SPCR_TSEC1EP_SHIFT (31-23) -#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority. */ -#define SPCR_TSEC2DP_SHIFT (31-27) -#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */ -#define SPCR_TSEC2BDP_SHIFT (31-29) -#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority. */ -#define SPCR_TSEC2EP_SHIFT (31-31) -#define SPCR_RES ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \ - | SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \ - | SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP) -#elif defined (CONFIG_MPC8360) -#define SPCR_RES ~(SPCR_PCIHPE|SPCR_PCIPR|SPCR_OPT|SPCR_TBEN|SPCR_COREPR) -#endif - u32 sicrl; /* System General Purpose Register Low */ -#if defined (CONFIG_MPC8349) -#define SICRL_LDP_A 0x80000000 -#define SICRL_USB1 0x40000000 -#define SICRL_USB0 0x20000000 -#define SICRL_UART 0x0C000000 -#define SICRL_GPIO1_A 0x02000000 -#define SICRL_GPIO1_B 0x01000000 -#define SICRL_GPIO1_C 0x00800000 -#define SICRL_GPIO1_D 0x00400000 -#define SICRL_GPIO1_E 0x00200000 -#define SICRL_GPIO1_F 0x00180000 -#define SICRL_GPIO1_G 0x00040000 -#define SICRL_GPIO1_H 0x00020000 -#define SICRL_GPIO1_I 0x00010000 -#define SICRL_GPIO1_J 0x00008000 -#define SICRL_GPIO1_K 0x00004000 -#define SICRL_GPIO1_L 0x00003000 -#define SICRL_RES ~(SICRL_LDP_A | SICRL_USB0 | SICRL_USB1 | SICRL_UART \ - | SICRL_GPIO1_A | SICRL_GPIO1_B | SICRL_GPIO1_C \ - | SICRL_GPIO1_D | SICRL_GPIO1_E | SICRL_GPIO1_F \ - | SICRL_GPIO1_G | SICRL_GPIO1_H | SICRL_GPIO1_I \ - | SICRL_GPIO1_J | SICRL_GPIO1_K | SICRL_GPIO1_L ) -#elif defined (CONFIG_MPC8360) -#define SICRL_LDP_A 0xC0000000 -#define SICRL_LCLK_1 0x10000000 -#define SICRL_LCLK_2 0x08000000 -#define SICRL_SRCID_A 0x03000000 -#define SICRL_IRQ_CKSTP_A 0x00C00000 -#define SICRL_RES ~(SICRL_LDP_A | SICRL_LCLK_1 | SICRL_LCLK_2 | \ - SICRL_SRCID_A | SICRL_IRQ_CKSTP_A) -#endif - u32 sicrh; /* System General Purpose Register High */ -#define SICRH_DDR 0x80000000 -#if defined (CONFIG_MPC8349) -#define SICRH_TSEC1_A 0x10000000 -#define SICRH_TSEC1_B 0x08000000 -#define SICRH_TSEC1_C 0x04000000 -#define SICRH_TSEC1_D 0x02000000 -#define SICRH_TSEC1_E 0x01000000 -#define SICRH_TSEC1_F 0x00800000 -#define SICRH_TSEC2_A 0x00400000 -#define SICRH_TSEC2_B 0x00200000 -#define SICRH_TSEC2_C 0x00100000 -#define SICRH_TSEC2_D 0x00080000 -#define SICRH_TSEC2_E 0x00040000 -#define SICRH_TSEC2_F 0x00020000 -#define SICRH_TSEC2_G 0x00010000 -#define SICRH_TSEC2_H 0x00008000 -#define SICRH_GPIO2_A 0x00004000 -#define SICRH_GPIO2_B 0x00002000 -#define SICRH_GPIO2_C 0x00001000 -#define SICRH_GPIO2_D 0x00000800 -#define SICRH_GPIO2_E 0x00000400 -#define SICRH_GPIO2_F 0x00000200 -#define SICRH_GPIO2_G 0x00000180 -#define SICRH_GPIO2_H 0x00000060 -#define SICRH_TSOBI1 0x00000002 -#define SICRH_TSOBI2 0x00000001 -#define SICRH_RES ~( SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \ - | SICRH_TSEC1_C | SICRH_TSEC1_D | SICRH_TSEC1_E \ - | SICRH_TSEC1_F | SICRH_TSEC2_A | SICRH_TSEC2_B \ - | SICRH_TSEC2_C | SICRH_TSEC2_D | SICRH_TSEC2_E \ - | SICRH_TSEC2_F | SICRH_TSEC2_G | SICRH_TSEC2_H \ - | SICRH_GPIO2_A | SICRH_GPIO2_B | SICRH_GPIO2_C \ - | SICRH_GPIO2_D | SICRH_GPIO2_E | SICRH_GPIO2_F \ - | SICRH_GPIO2_G | SICRH_GPIO2_H | SICRH_TSOBI1 \ - | SICRH_TSOBI2) -#elif defined (CONFIG_MPC8360) -#define SICRH_SECONDARY_DDR 0x40000000 -#define SICRH_SDDROE 0x02000000 /* SDDRIOE bit from reset configuration word high. */ -#define SICRH_UC1EOBI 0x00000004 /* UCC1 Ethernet Output Buffer Impedance. */ -#define SICRH_UC2E1OBI 0x00000002 /* UCC2 Ethernet pin option 1 Output Buffer Impedance. */ -#define SICRH_UC2E2OBI 0x00000001 /* UCC2 Ethernet pin option 2 Output Buffer Impedance. */ -#define SICRH_RES ~(SICRH_DDR | SICRH_SECONDARY_DDR | SICRH_SDDROE | \ - SICRH_UC2E1OBI | SICRH_UC2E2OBI | SICRH_UC2E2OBI) -#endif - u8 res6[0xE4]; + u32 sicrl; /* System I/O Configuration Register Low */ + u32 sicrh; /* System I/O Configuration Register High */ + u8 res6[0x0C]; + u32 ddrcdr; /* DDR Control Driver Register */ + u32 ddrdsr; /* DDR Debug Status Register */ + u8 res7[0xD0]; } sysconf83xx_t; /* @@ -196,11 +73,8 @@ typedef struct wdt83xx { u8 res0[4]; u32 swcrr; /* System watchdog control register */ u32 swcnr; /* System watchdog count register */ -#define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field. -#define SWCNR_RES ~(SWCNR_SWCN) u8 res1[2]; u16 swsrr; /* System watchdog service register */ -#define SWSRR_WS 0x0000FFFF /* Software Watchdog Service Field. */ u8 res2[0xF0]; } wdt83xx_t; @@ -209,91 +83,46 @@ typedef struct wdt83xx { */ typedef struct rtclk83xx { u32 cnr; /* control register */ -#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit */ -#define CNR_CLIN 0x00000040 /* Input Clock Control Bit */ -#define CNR_AIM 0x00000002 /* Alarm Interrupt Mask Bit */ -#define CNR_SIM 0x00000001 /* Second Interrupt Mask Bit */ -#define CNR_RES ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM) u32 ldr; /* load register */ -#define LDR_CLDV 0xFFFFFFFF /* Contains the 32-bit value to be - * loaded in a 32-bit RTC counter.*/ u32 psr; /* prescale register */ -#define PSR_PRSC 0xFFFFFFFF /* RTC Prescaler bits. */ - u32 ctr; /* Counter value field register */ -#define CRT_CNTV 0xFFFFFFFF /* RTC Counter value field. */ + u32 ctr; /* counter value field register */ u32 evr; /* event register */ -#define RTEVR_SIF 0x00000001 /* Second Interrupt Flag Bit */ -#define RTEVR_AIF 0x00000002 /* Alarm Interrupt Flag Bit */ -#define RTEVR_RES ~(RTEVR_SIF | RTEVR_AIF) -#define PTEVR_PIF 0x00000001 /* Periodic interrupt flag bit. */ -#define PTEVR_RES ~(PTEVR_PIF) u32 alr; /* alarm register */ u8 res0[0xE8]; } rtclk83xx_t; /* - * Global timper module + * Global timer module */ - typedef struct gtm83xx { - u8 cfr1; /* Timer1/2 Configuration */ -#define CFR1_PCAS 0x80 /* Pair Cascade mode */ -#define CFR1_BCM 0x40 /* Backward compatible mode */ -#define CFR1_STP2 0x20 /* Stop timer */ -#define CFR1_RST2 0x10 /* Reset timer */ -#define CFR1_GM2 0x08 /* Gate mode for pin 2 */ -#define CFR1_GM1 0x04 /* Gate mode for pin 1 */ -#define CFR1_STP1 0x02 /* Stop timer */ -#define CFR1_RST1 0x01 /* Reset timer */ -#define CFR1_RES ~(CFR1_PCAS | CFR1_STP2 | CFR1_RST2 | CFR1_GM2 |\ - CFR1_GM1 | CFR1_STP1 | CFR1_RST1) + u8 cfr1; /* Timer1/2 Configuration */ u8 res0[3]; - u8 cfr2; /* Timer3/4 Configuration */ -#define CFR2_PCAS 0x80 /* Pair Cascade mode */ -#define CFR2_SCAS 0x40 /* Super Cascade mode */ -#define CFR2_STP4 0x20 /* Stop timer */ -#define CFR2_RST4 0x10 /* Reset timer */ -#define CFR2_GM4 0x08 /* Gate mode for pin 4 */ -#define CFR2_GM3 0x04 /* Gate mode for pin 3 */ -#define CFR2_STP3 0x02 /* Stop timer */ -#define CFR2_RST3 0x01 /* Reset timer */ + u8 cfr2; /* Timer3/4 Configuration */ u8 res1[10]; - u16 mdr1; /* Timer1 Mode Register */ -#define MDR_SPS 0xff00 /* Secondary Prescaler value */ -#define MDR_CE 0x00c0 /* Capture edge and enable interrupt */ -#define MDR_OM 0x0020 /* Output mode */ -#define MDR_ORI 0x0010 /* Output reference interrupt enable */ -#define MDR_FRR 0x0008 /* Free run/restart */ -#define MDR_ICLK 0x0006 /* Input clock source for the timer */ -#define MDR_GE 0x0001 /* Gate enable */ - u16 mdr2; /* Timer2 Mode Register */ - u16 rfr1; /* Timer1 Reference Register */ - u16 rfr2; /* Timer2 Reference Register */ - u16 cpr1; /* Timer1 Capture Register */ - u16 cpr2; /* Timer2 Capture Register */ - u16 cnr1; /* Timer1 Counter Register */ - u16 cnr2; /* Timer2 Counter Register */ - u16 mdr3; /* Timer3 Mode Register */ - u16 mdr4; /* Timer4 Mode Register */ - u16 rfr3; /* Timer3 Reference Register */ - u16 rfr4; /* Timer4 Reference Register */ - u16 cpr3; /* Timer3 Capture Register */ - u16 cpr4; /* Timer4 Capture Register */ - u16 cnr3; /* Timer3 Counter Register */ - u16 cnr4; /* Timer4 Counter Register */ - u16 evr1; /* Timer1 Event Register */ - u16 evr2; /* Timer2 Event Register */ - u16 evr3; /* Timer3 Event Register */ - u16 evr4; /* Timer4 Event Register */ -#define GTEVR_REF 0x0002 /* Output reference event */ -#define GTEVR_CAP 0x0001 /* Counter Capture event */ -#define GTEVR_RES ~(EVR_CAP|EVR_REF) - u16 psr1; /* Timer1 Prescaler Register */ - u16 psr2; /* Timer2 Prescaler Register */ - u16 psr3; /* Timer3 Prescaler Register */ - u16 psr4; /* Timer4 Prescaler Register */ -#define GTPSR_PPS 0x00FF /* Primary Prescaler Bits. */ -#define GTPSR_RES ~(GTPSR_PPS) + u16 mdr1; /* Timer1 Mode Register */ + u16 mdr2; /* Timer2 Mode Register */ + u16 rfr1; /* Timer1 Reference Register */ + u16 rfr2; /* Timer2 Reference Register */ + u16 cpr1; /* Timer1 Capture Register */ + u16 cpr2; /* Timer2 Capture Register */ + u16 cnr1; /* Timer1 Counter Register */ + u16 cnr2; /* Timer2 Counter Register */ + u16 mdr3; /* Timer3 Mode Register */ + u16 mdr4; /* Timer4 Mode Register */ + u16 rfr3; /* Timer3 Reference Register */ + u16 rfr4; /* Timer4 Reference Register */ + u16 cpr3; /* Timer3 Capture Register */ + u16 cpr4; /* Timer4 Capture Register */ + u16 cnr3; /* Timer3 Counter Register */ + u16 cnr4; /* Timer4 Counter Register */ + u16 evr1; /* Timer1 Event Register */ + u16 evr2; /* Timer2 Event Register */ + u16 evr3; /* Timer3 Event Register */ + u16 evr4; /* Timer4 Event Register */ + u16 psr1; /* Timer1 Prescaler Register */ + u16 psr2; /* Timer2 Prescaler Register */ + u16 psr3; /* Timer3 Prescaler Register */ + u16 psr4; /* Timer4 Prescaler Register */ u8 res[0xC0]; } gtm83xx_t; @@ -301,188 +130,31 @@ typedef struct gtm83xx { * Integrated Programmable Interrupt Controller */ typedef struct ipic83xx { - u32 sicfr; /* System Global Interrupt Configuration Register (SICFR) */ -#define SICFR_HPI 0x7f000000 /* Highest Priority Interrupt */ -#define SICFR_MPSB 0x00400000 /* Mixed interrupts Priority Scheme for group B */ -#define SICFR_MPSA 0x00200000 /* Mixed interrupts Priority Scheme for group A */ -#define SICFR_IPSD 0x00080000 /* Internal interrupts Priority Scheme for group D */ -#define SICFR_IPSA 0x00010000 /* Internal interrupts Priority Scheme for group A */ -#define SICFR_HPIT 0x00000300 /* HPI priority position IPIC output interrupt Type */ -#define SICFR_RES ~(SICFR_HPI|SICFR_MPSB|SICFR_MPSA|SICFR_IPSD|SICFR_IPSA|SICFR_HPIT) - u32 sivcr; /* System Global Interrupt Vector Register (SIVCR) */ -#define SICVR_IVECX 0xfc000000 /* Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation) */ -#define SICVR_IVEC 0x0000007f /* Interrupt vector */ -#define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC) - u32 sipnr_h; /* System Internal Interrupt Pending Register - High (SIPNR_H) */ -#if defined (CONFIG_MPC8349) -#define SIIH_TSEC1TX 0x80000000 /* TSEC1 Tx interrupt */ -#define SIIH_TSEC1RX 0x40000000 /* TSEC1 Rx interrupt */ -#define SIIH_TSEC1ER 0x20000000 /* TSEC1 Eror interrupt */ -#define SIIH_TSEC2TX 0x10000000 /* TSEC2 Tx interrupt */ -#define SIIH_TSEC2RX 0x08000000 /* TSEC2 Rx interrupt */ -#define SIIH_TSEC2ER 0x04000000 /* TSEC2 Eror interrupt */ -#define SIIH_USB2DR 0x02000000 /* USB2 DR interrupt */ -#define SIIH_USB2MPH 0x01000000 /* USB2 MPH interrupt */ -#endif -#if defined (CONFIG_MPC8360) -#define SIIH_H_QE_H 0x80000000 /* QE high interrupt */ -#define SIIH_H_QE_L 0x40000000 /* QE low interrupt */ -#endif -#define SIIH_UART1 0x00000080 /* UART1 interrupt */ -#define SIIH_UART2 0x00000040 /* UART2 interrupt */ -#define SIIH_SEC 0x00000020 /* SEC interrupt */ -#define SIIH_I2C1 0x00000004 /* I2C1 interrupt */ -#define SIIH_I2C2 0x00000002 /* I2C2 interrupt */ -#if defined (CONFIG_MPC8349) -#define SIIH_SPI 0x00000001 /* SPI interrupt */ -#define SIIH_RES ~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \ - | SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \ - | SIIH_USB2DR | SIIH_USB2MPH | SIIH_UART1 \ - | SIIH_UART2 | SIIH_SEC | SIIH_I2C1 \ - | SIIH_I2C2 | SIIH_SPI) -#endif -#if defined (CONFIG_MPC8360) -#define SIIH_RES ~(SIIH_H_QE_H | SIIH_H_QE_L | SIIH_H_UART1 | \ - SIIH_H_UART2| SIIH_H_SEC | SIIH_H_I2C1 |SIIH_H_I2C2) -#endif - u32 sipnr_l; /* System Internal Interrupt Pending Register - Low (SIPNR_L) */ -#define SIIL_RTCS 0x80000000 /* RTC SECOND interrupt */ -#define SIIL_PIT 0x40000000 /* PIT interrupt */ -#define SIIL_PCI1 0x20000000 /* PCI1 interrupt */ -#if defined (CONFIG_MPC8349) -#define SIIL_PCI2 0x10000000 /* PCI2 interrupt */ -#endif -#define SIIL_RTCA 0x08000000 /* RTC ALARM interrupt */ -#define SIIL_MU 0x04000000 /* Message Unit interrupt */ -#define SIIL_SBA 0x02000000 /* System Bus Arbiter interrupt */ -#define SIIL_DMA 0x01000000 /* DMA interrupt */ -#define SIIL_GTM4 0x00800000 /* GTM4 interrupt */ -#define SIIL_GTM8 0x00400000 /* GTM8 interrupt */ -#if defined (CONFIG_MPC8349) -#define SIIL_GPIO1 0x00200000 /* GPIO1 interrupt */ -#define SIIL_GPIO2 0x00100000 /* GPIO2 interrupt */ -#endif -#if defined (CONFIG_MPC8360) -#define SIIL_QEP 0x00200000 /* QE ports interrupt */ -#define SIIL_SDDR 0x00100000 /* SDDR interrupt */ -#endif -#define SIIL_DDR 0x00080000 /* DDR interrupt */ -#define SIIL_LBC 0x00040000 /* LBC interrupt */ -#define SIIL_GTM2 0x00020000 /* GTM2 interrupt */ -#define SIIL_GTM6 0x00010000 /* GTM6 interrupt */ -#define SIIL_PMC 0x00008000 /* PMC interrupt */ -#define SIIL_GTM3 0x00000800 /* GTM3 interrupt */ -#define SIIL_GTM7 0x00000400 /* GTM7 interrupt */ -#define SIIL_GTM1 0x00000020 /* GTM1 interrupt */ -#define SIIL_GTM5 0x00000010 /* GTM5 interrupt */ -#define SIIL_DPTC 0x00000001 /* DPTC interrupt (!!! Invisible for user !!!) */ -#if defined (CONFIG_MPC8349) -#define SIIL_RES ~(SIIL_RTCS | SIIL_PIT | SIIL_PCI1 | SIIL_PCI2 \ - | SIIL_RTCA | SIIL_MU | SIIL_SBA | SIIL_DMA \ - | SIIL_GTM4 | SIIL_GTM8 | SIIL_GPIO1 | SIIL_GPIO2 \ - | SIIL_DDR | SIIL_LBC | SIIL_GTM2 | SIIL_GTM6 \ - | SIIL_PMC |SIIL_GTM3 | SIIL_GTM7 | SIIL_GTM1 \ - | SIIL_GTM5 |SIIL_DPTC ) -#endif -#if defined (CONFIG_MPC8360) -#define SIIL_RES ~(SIIL_RTCS |SIIL_PIT |SIIL_PCI1 |SIIL_RTCALR \ - |SIIL_MU |SIIL_SBA |SIIL_DMA |SIIL_GTM4 |SIIL_GTM8 \ - |SIIL_QEP | SIIL_SDDR| SIIL_DDR |SIIL_LBC |SIIL_GTM2 \ - |SIIL_GTM6 |SIIL_PMC |SIIL_GTM3 |SIIL_GTM7 |SIIL_GTM1 \ - |SIIL_GTM5 ) -#endif - u32 siprr_a; /* System Internal Interrupt Group A Priority Register (PRR) */ + u32 sicfr; /* System Global Interrupt Configuration Register */ + u32 sivcr; /* System Global Interrupt Vector Register */ + u32 sipnr_h; /* System Internal Interrupt Pending Register - High */ + u32 sipnr_l; /* System Internal Interrupt Pending Register - Low */ + u32 siprr_a; /* System Internal Interrupt Group A Priority Register */ u8 res0[8]; - u32 siprr_d; /* System Internal Interrupt Group D Priority Register (PRR) */ - u32 simsr_h; /* System Internal Interrupt Mask Register - High (SIIH) */ - u32 simsr_l; /* System Internal Interrupt Mask Register - Low (SIIL) */ + u32 siprr_d; /* System Internal Interrupt Group D Priority Register */ + u32 simsr_h; /* System Internal Interrupt Mask Register - High */ + u32 simsr_l; /* System Internal Interrupt Mask Register - Low */ u8 res1[4]; - u32 sepnr; /* System External Interrupt Pending Register (SEI) */ - u32 smprr_a; /* System Mixed Interrupt Group A Priority Register (PRR) */ - u32 smprr_b; /* System Mixed Interrupt Group B Priority Register (PRR) */ -#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */ -#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */ -#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */ -#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */ -#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */ -#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */ -#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */ -#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */ -#define PRR_RES ~(PRR_0|PRR_1|PRR_2|PRR_3|PRR_4|PRR_5|PRR_6|PRR_7) - u32 semsr; /* System External Interrupt Mask Register (SEI) */ -#define SEI_IRQ0 0x80000000 /* IRQ0 external interrupt */ -#define SEI_IRQ1 0x40000000 /* IRQ1 external interrupt */ -#define SEI_IRQ2 0x20000000 /* IRQ2 external interrupt */ -#define SEI_IRQ3 0x10000000 /* IRQ3 external interrupt */ -#define SEI_IRQ4 0x08000000 /* IRQ4 external interrupt */ -#define SEI_IRQ5 0x04000000 /* IRQ5 external interrupt */ -#define SEI_IRQ6 0x02000000 /* IRQ6 external interrupt */ -#define SEI_IRQ7 0x01000000 /* IRQ7 external interrupt */ -#define SEI_SIRQ0 0x00008000 /* SIRQ0 external interrupt */ -#define SEI_RES ~( SEI_IRQ0 | SEI_IRQ1 | SEI_IRQ2 | SEI_IRQ3 \ - | SEI_IRQ4 | SEI_IRQ5 | SEI_IRQ6 | SEI_IRQ7 \ - | SEI_SIRQ0) - u32 secnr; /* System External Interrupt Control Register (SECNR) */ -#define SECNR_MIXB0T 0xc0000000 /* MIXB0 priority position IPIC output interrupt type */ -#define SECNR_MIXB1T 0x30000000 /* MIXB1 priority position IPIC output interrupt type */ -#define SECNR_MIXA0T 0x00c00000 /* MIXA0 priority position IPIC output interrupt type */ -#define SECNR_SYSA1T 0x00300000 /* MIXA1 priority position IPIC output interrupt type */ -#define SECNR_EDI0 0x00008000 /* IRQ0 external interrupt edge/level detect */ -#define SECNR_EDI1 0x00004000 /* IRQ1 external interrupt edge/level detect */ -#define SECNR_EDI2 0x00002000 /* IRQ2 external interrupt edge/level detect */ -#define SECNR_EDI3 0x00001000 /* IRQ3 external interrupt edge/level detect */ -#define SECNR_EDI4 0x00000800 /* IRQ4 external interrupt edge/level detect */ -#define SECNR_EDI5 0x00000400 /* IRQ5 external interrupt edge/level detect */ -#define SECNR_EDI6 0x00000200 /* IRQ6 external interrupt edge/level detect */ -#define SECNR_EDI7 0x00000100 /* IRQ7 external interrupt edge/level detect */ -#define SECNR_RES ~( SECNR_MIXB0T | SECNR_MIXB1T | SECNR_MIXA0T \ - | SECNR_SYSA1T | SECNR_EDI0 | SECNR_EDI1 \ - | SECNR_EDI2 | SECNR_EDI3 | SECNR_EDI4 \ - | SECNR_EDI5 | SECNR_EDI6 | SECNR_EDI7) - u32 sersr; /* System Error Status Register (SERR) */ - u32 sermr; /* System Error Mask Register (SERR) */ -#define SERR_IRQ0 0x80000000 /* IRQ0 MCP request */ -#define SERR_WDT 0x40000000 /* WDT MCP request */ -#define SERR_SBA 0x20000000 /* SBA MCP request */ -#if defined (CONFIG_MPC8349) -#define SERR_DDR 0x10000000 /* DDR MCP request */ -#define SERR_LBC 0x08000000 /* LBC MCP request */ -#define SERR_PCI1 0x04000000 /* PCI1 MCP request */ -#define SERR_PCI2 0x02000000 /* PCI2 MCP request */ -#endif -#if defined (CONFIG_MPC8360) -#define SERR_CIEE 0x10000000 /* CIEE MCP request */ -#define SERR_CMEE 0x08000000 /* CMEEMCP request */ -#define SERR_PCI 0x04000000 /* PCI MCP request */ -#endif -#define SERR_MU 0x01000000 /* MU MCP request */ -#define SERR_RNC 0x00010000 /* MU MCP request (!!! Non-visible for users !!!) */ -#if defined (CONFIG_MPC8349) -#define SERR_RES ~( SERR_IRQ0 | SERR_WDT | SERR_SBA | SERR_DDR \ - |SERR_LBC | SERR_PCI1 | SERR_PCI2 | SERR_MU \ - |SERR_RNC ) -#elif defined (CONFIG_MPC8360) -#define SERR_RES ~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_CIEE\ - |SERR_CMEE|SERR_PCI|SERR_MU) -#endif - u32 sercr; /* System Error Control Register (SERCR) */ -#define SERCR_MCPR 0x00000001 /* MCP Route */ -#define SERCR_RES ~(SERCR_MCPR) + u32 sepnr; /* System External Interrupt Pending Register */ + u32 smprr_a; /* System Mixed Interrupt Group A Priority Register */ + u32 smprr_b; /* System Mixed Interrupt Group B Priority Register */ + u32 semsr; /* System External Interrupt Mask Register */ + u32 secnr; /* System External Interrupt Control Register */ + u32 sersr; /* System Error Status Register */ + u32 sermr; /* System Error Mask Register */ + u32 sercr; /* System Error Control Register */ u8 res2[4]; - u32 sifcr_h; /* System Internal Interrupt Force Register - High (SIIH) */ - u32 sifcr_l; /* System Internal Interrupt Force Register - Low (SIIL) */ - u32 sefcr; /* System External Interrupt Force Register (SEI) */ - u32 serfr; /* System Error Force Register (SERR) */ + u32 sifcr_h; /* System Internal Interrupt Force Register - High */ + u32 sifcr_l; /* System Internal Interrupt Force Register - Low */ + u32 sefcr; /* System External Interrupt Force Register */ + u32 serfr; /* System Error Force Register */ u32 scvcr; /* System Critical Interrupt Vector Register */ -#define SCVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible - critical interrupt vector. */ -#define SCVCR_CVEC 0x0000007F /* Critical interrupt vector */ -#define SCVCR_RES ~(SCVCR_CVECX|SCVCR_CVEC) u32 smvcr; /* System Management Interrupt Vector Register */ -#define SMVCR_CVECX 0xFC000000 /* Backward (MPC8260) compatible - critical interrupt vector. */ -#define SMVCR_CVEC 0x0000007F /* Critical interrupt vector */ -#define SMVCR_RES ~(SMVCR_CVECX|SMVCR_CVEC) u8 res3[0x98]; } ipic83xx_t; @@ -491,43 +163,14 @@ typedef struct ipic83xx { */ typedef struct arbiter83xx { u32 acr; /* Arbiter Configuration Register */ -#define ACR_COREDIS 0x10000000 /* Core disable. */ -#define ACR_COREDIS_SHIFT (31-7) -#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth (number of outstanding transactions). */ -#define ACR_PIPE_DEP_SHIFT (31-15) -#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */ -#define ACR_PCI_RPTCNT_SHIFT (31-19) -#define ACR_RPTCNT 0x00000700 /* Repeat count. */ -#define ACR_RPTCNT_SHIFT (31-23) -#define ACR_APARK 0x00000030 /* Address parking. */ -#define ACR_APARK_SHIFT (31-27) -#define ACR_PARKM 0x0000000F /* Parking master. */ -#define ACR_PARKM_SHIFT (31-31) -#define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM) u32 atr; /* Arbiter Timers Register */ -#define ATR_DTO 0x00FF0000 /* Data time out. */ -#define ATR_ATO 0x000000FF /* Address time out. */ -#define ATR_RES ~(ATR_DTO|ATR_ATO) u8 res[4]; - u32 aer; /* Arbiter Event Register (AE) */ - u32 aidr; /* Arbiter Interrupt Definition Register (AE) */ - u32 amr; /* Arbiter Mask Register (AE) */ + u32 aer; /* Arbiter Event Register */ + u32 aidr; /* Arbiter Interrupt Definition Register */ + u32 amr; /* Arbiter Mask Register */ u32 aeatr; /* Arbiter Event Attributes Register */ -#define AEATR_EVENT 0x07000000 /* Event type. */ -#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */ -#define AEATR_TBST 0x00000800 /* Transfer burst. */ -#define AEATR_TSIZE 0x00000700 /* Transfer Size. */ -#define AEATR_TTYPE 0x0000001F /* Transfer Type. */ -#define AEATR_RES ~(AEATR_EVENT|AEATR_MSTR_ID|AEATR_TBST|AEATR_TSIZE|AEATR_TTYPE) u32 aeadr; /* Arbiter Event Address Register */ - u32 aerr; /* Arbiter Event Response Register (AE) */ -#define AE_ETEA 0x00000020 /* Transfer error. */ -#define AE_RES_ 0x00000010 /* Reserved transfer type. */ -#define AE_ECW 0x00000008 /* External control word transfer type. */ -#define AE_AO 0x00000004 /* Address Only transfer type. */ -#define AE_DTO 0x00000002 /* Data time out. */ -#define AE_ATO 0x00000001 /* Address time out. */ -#define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO) + u32 aerr; /* Arbiter Event Response Register */ u8 res1[0xDC]; } arbiter83xx_t; @@ -535,184 +178,24 @@ typedef struct arbiter83xx { * Reset Module */ typedef struct reset83xx { - u32 rcwl; /* RCWL Register */ -#define RCWL_LBIUCM 0x80000000 /* LBIUCM */ -#define RCWL_LBIUCM_SHIFT 31 -#define RCWL_DDRCM 0x40000000 /* DDRCM */ -#define RCWL_DDRCM_SHIFT 30 -#if defined (CONFIG_MPC8349) -#define RCWL_SVCOD 0x30000000 /* SVCOD */ -#endif -#define RCWL_SPMF 0x0f000000 /* SPMF */ -#define RCWL_SPMF_SHIFT 24 -#define RCWL_COREPLL 0x007F0000 /* COREPLL */ -#define RCWL_COREPLL_SHIFT 16 -#define RCWL_CEVCOD 0x000000C0 /* CEVCOD */ -#define RCWL_CEPDF 0x00000020 /* CEPDF */ -#define RCWL_CEPDF_SHIFT 5 -#define RCWL_CEPMF 0x0000001F /* CEPMF */ -#define RCWL_CEPMF_SHIFT 0 -#if defined (CONFIG_MPC8349) -#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF) -#elif defined (CONFIG_MPC8360) -#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SPMF|RCWL_COREPLL|RCWL_CEPDF|RCWL_CEPMF) -#endif - u32 rcwh; /* RCHL Register */ -#define RCWH_PCIHOST 0x80000000 /* PCIHOST */ -#define RCWH_PCIHOST_SHIFT 31 -#if defined (CONFIG_MPC8349) -#define RCWH_PCI64 0x40000000 /* PCI64 */ -#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB */ -#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB */ -#elif defined (CONFIG_MPC8360) -#define RCWH_PCIARB 0x20000000 /* PCI internal arbiter mode. */ -#define RCWH_PCICKDRV 0x10000000 /* PCI clock output drive. */ -#endif -#define RCWH_COREDIS 0x08000000 /* COREDIS */ -#define RCWH_BMS 0x04000000 /* BMS */ -#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ */ -#define RCWH_SWEN 0x00800000 /* SWEN */ -#define RCWH_ROMLOC 0x00700000 /* ROMLOC */ -#if defined (CONFIG_MPC8349) -#define RCWH_TSEC1M 0x0000c000 /* TSEC1M */ -#define RCWH_TSEC2M 0x00003000 /* TSEC2M */ -#define RCWH_TPR 0x00000100 /* TPR */ -#elif defined (CONFIG_MPC8360) -#define RCWH_SDDRIOE 0x00000010 /* Secondary DDR IO Enable. */ -#endif -#define RCWH_TLE 0x00000008 /* TLE */ -#define RCWH_LALE 0x00000004 /* LALE */ -#if defined (CONFIG_MPC8349) -#define RCWH_RES ~(RCWH_PCIHOST | RCWH_PCI64 | RCWH_PCI1ARB \ - | RCWH_PCI2ARB | RCWH_COREDIS | RCWH_BMS \ - | RCWH_BOOTSEQ | RCWH_SWEN | RCWH_ROMLOC \ - | RCWH_TSEC1M | RCWH_TSEC2M | RCWH_TPR \ - | RCWH_TLE | RCWH_LALE) -#elif defined (CONFIG_MPC8360) -#define RCWH_RES ~(RCWH_PCIHOST|RCWH_PCIARB|RCWH_PCICKDRV \ - |RCWH_COREDIS|RCWH_BMS|RCWH_BOOTSEQ|RCWH_SWEN \ - |RCWH_SDDRIOE |RCWH_TLE) -#endif + u32 rcwl; /* Reset Configuration Word Low Register */ + u32 rcwh; /* Reset Configuration Word High Register */ u8 res0[8]; - u32 rsr; /* Reset status Register */ -#define RSR_RSTSRC 0xE0000000 /* Reset source */ -#define RSR_RSTSRC_SHIFT 29 -#define RSR_BSF 0x00010000 /* Boot seq. fail */ -#define RSR_BSF_SHIFT 16 -#define RSR_SWSR 0x00002000 /* software soft reset */ -#define RSR_SWSR_SHIFT 13 -#define RSR_SWHR 0x00001000 /* software hard reset */ -#define RSR_SWHR_SHIFT 12 -#define RSR_JHRS 0x00000200 /* jtag hreset */ -#define RSR_JHRS_SHIFT 9 -#define RSR_JSRS 0x00000100 /* jtag sreset status */ -#define RSR_JSRS_SHIFT 8 -#define RSR_CSHR 0x00000010 /* checkstop reset status */ -#define RSR_CSHR_SHIFT 4 -#define RSR_SWRS 0x00000008 /* software watchdog reset status */ -#define RSR_SWRS_SHIFT 3 -#define RSR_BMRS 0x00000004 /* bus monitop reset status */ -#define RSR_BMRS_SHIFT 2 -#define RSR_SRS 0x00000002 /* soft reset status */ -#define RSR_SRS_SHIFT 1 -#define RSR_HRS 0x00000001 /* hard reset status */ -#define RSR_HRS_SHIFT 0 -#define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR | RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS | RSR_BMRS | RSR_SRS | RSR_HRS) - u32 rmr; /* Reset mode Register */ -#define RMR_CSRE 0x00000001 /* checkstop reset enable */ -#define RMR_CSRE_SHIFT 0 -#define RMR_RES ~(RMR_CSRE) - u32 rpr; /* Reset protection Register */ - u32 rcr; /* Reset Control Register */ -#define RCR_SWHR 0x00000002 /* software hard reset */ -#define RCR_SWSR 0x00000001 /* software soft reset */ -#define RCR_RES ~(RCR_SWHR | RCR_SWSR) - u32 rcer; /* Reset Control Enable Register */ -#define RCER_CRE 0x00000001 /* software hard reset */ -#define RCER_RES ~(RCER_CRE) + u32 rsr; /* Reset Status Register */ + u32 rmr; /* Reset Mode Register */ + u32 rpr; /* Reset protection Register */ + u32 rcr; /* Reset Control Register */ + u32 rcer; /* Reset Control Enable Register */ u8 res1[0xDC]; } reset83xx_t; +/* + * Clock Module + */ typedef struct clk83xx { - u32 spmr; /* system PLL mode Register */ -#define SPMR_LBIUCM 0x80000000 /* LBIUCM */ -#define SPMR_DDRCM 0x40000000 /* DDRCM */ -#if defined (CONFIG_MPC8349) -#define SPMR_SVCOD 0x30000000 /* SVCOD */ -#endif -#define SPMR_SPMF 0x0F000000 /* SPMF */ -#define SPMR_CKID 0x00800000 /* CKID */ -#define SPMR_CKID_SHIFT 23 -#define SPMR_COREPLL 0x007F0000 /* COREPLL */ -#define SPMR_CEVCOD 0x000000C0 /* CEVCOD */ -#define SPMR_CEPDF 0x00000020 /* CEPDF */ -#define SPMR_CEPMF 0x0000001F /* CEPMF */ -#if defined (CONFIG_MPC8349) -#define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SVCOD \ - | SPMR_SPMF | SPMR_CKID | SPMR_COREPLL \ - | SPMR_CEVCOD | SPMR_CEPDF | SPMR_CEPMF) -#elif defined (CONFIG_MPC8360) -#define SPMR_RES ~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SPMF \ - | SPMR_CKID | SPMR_COREPLL | SPMR_CEVCOD \ - | SPMR_CEPDF | SPMR_CEPMF) -#endif - u32 occr; /* output clock control Register */ -#define OCCR_PCICOE0 0x80000000 /* PCICOE0 */ -#define OCCR_PCICOE1 0x40000000 /* PCICOE1 */ -#define OCCR_PCICOE2 0x20000000 /* PCICOE2 */ -#if defined (CONFIG_MPC8349) -#define OCCR_PCICOE3 0x10000000 /* PCICOE3 */ -#define OCCR_PCICOE4 0x08000000 /* PCICOE4 */ -#define OCCR_PCICOE5 0x04000000 /* PCICOE5 */ -#define OCCR_PCICOE6 0x02000000 /* PCICOE6 */ -#define OCCR_PCICOE7 0x01000000 /* PCICOE7 */ -#endif -#define OCCR_PCICD0 0x00800000 /* PCICD0 */ -#define OCCR_PCICD1 0x00400000 /* PCICD1 */ -#define OCCR_PCICD2 0x00200000 /* PCICD2 */ -#if defined (CONFIG_MPC8349) -#define OCCR_PCICD3 0x00100000 /* PCICD3 */ -#define OCCR_PCICD4 0x00080000 /* PCICD4 */ -#define OCCR_PCICD5 0x00040000 /* PCICD5 */ -#define OCCR_PCICD6 0x00020000 /* PCICD6 */ -#define OCCR_PCICD7 0x00010000 /* PCICD7 */ -#define OCCR_PCI1CR 0x00000002 /* PCI1CR */ -#define OCCR_PCI2CR 0x00000001 /* PCI2CR */ -#define OCCR_RES ~(OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 \ - | OCCR_PCICOE3 | OCCR_PCICOE4 | OCCR_PCICOE5 \ - | OCCR_PCICOE6 | OCCR_PCICOE7 | OCCR_PCICD0 \ - | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICD3 \ - | OCCR_PCICD4 | OCCR_PCICD5 | OCCR_PCICD6 \ - | OCCR_PCICD7 | OCCR_PCI1CR | OCCR_PCI2CR ) -#endif -#if defined (CONFIG_MPC8360) -#define OCCR_PCICR 0x00000002 /* PCI clock rate */ -#define OCCR_RES ~(OCCR_PCICOE0|OCCR_PCICOE1|OCCR_PCICOE2 \ - |OCCR_PCICD0|OCCR_PCICD1|OCCR_PCICD2|OCCR_PCICR ) -#endif - u32 sccr; /* system clock control Register */ -#if defined (CONFIG_MPC8349) -#define SCCR_TSEC1CM 0xc0000000 /* TSEC1CM */ -#define SCCR_TSEC1CM_SHIFT 30 -#define SCCR_TSEC2CM 0x30000000 /* TSEC2CM */ -#define SCCR_TSEC2CM_SHIFT 28 -#endif -#define SCCR_ENCCM 0x03000000 /* ENCCM */ -#define SCCR_ENCCM_SHIFT 24 -#if defined (CONFIG_MPC8349) -#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM */ -#define SCCR_USBMPHCM_SHIFT 22 -#define SCCR_USBDRCM 0x00300000 /* USBDRCM */ -#define SCCR_USBDRCM_SHIFT 20 -#endif -#define SCCR_PCICM 0x00010000 /* PCICM */ -#if defined (CONFIG_MPC8349) -#define SCCR_RES ~( SCCR_TSEC1CM | SCCR_TSEC2CM | SCCR_ENCCM \ - | SCCR_USBMPHCM | SCCR_USBDRCM | SCCR_PCICM) -#endif -#if defined (CONFIG_MPC8360) -#define SCCR_RES ~(SCCR_ENCCM | SCCR_PCICM) -#endif + u32 spmr; /* system PLL mode Register */ + u32 occr; /* output clock control Register */ + u32 sccr; /* system clock control Register */ u8 res0[0xF4]; } clk83xx_t; @@ -720,27 +203,14 @@ typedef struct clk83xx { * Power Management Control Module */ typedef struct pmc83xx { - u32 pmccr; /* PMC Configuration Register */ -#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable */ -#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable */ -#if defined (CONFIG_MPC8360) -#define PMCCR_SDLPEN 0x00000004 /* Secondary DDR SDRAM Low Power Enable */ -#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN | PMCCR_SDLPEN) -#elif defined (CONFIG_MPC8349) -#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN) -#endif - u32 pmcer; /* PMC Event Register */ -#define PMCER_PMCI 0x00000001 /* PMC Interrupt */ -#define PMCER_RES ~(PMCER_PMCI) - u32 pmcmr; /* PMC Mask Register */ -#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable */ -#define PMCMR_RES ~(PMCMR_PMCIE) + u32 pmccr; /* PMC Configuration Register */ + u32 pmcer; /* PMC Event Register */ + u32 pmcmr; /* PMC Mask Register */ u8 res0[0xF4]; } pmc83xx_t; -#if defined (CONFIG_MPC8349) /* - * general purpose I/O module + * General purpose I/O module */ typedef struct gpio83xx { u32 dir; /* direction register */ @@ -751,124 +221,20 @@ typedef struct gpio83xx { u32 icr; /* external interrupt control register */ u8 res0[0xE8]; } gpio83xx_t; -#endif -#if defined (CONFIG_MPC8360) /* * QE Ports Interrupts Registers */ typedef struct qepi83xx { u8 res0[0xC]; u32 qepier; /* QE Ports Interrupt Event Register */ -#define QEPIER_PA15 0x80000000 -#define QEPIER_PA16 0x40000000 -#define QEPIER_PA29 0x20000000 -#define QEPIER_PA30 0x10000000 -#define QEPIER_PB3 0x08000000 -#define QEPIER_PB5 0x04000000 -#define QEPIER_PB12 0x02000000 -#define QEPIER_PB13 0x01000000 -#define QEPIER_PB26 0x00800000 -#define QEPIER_PB27 0x00400000 -#define QEPIER_PC27 0x00200000 -#define QEPIER_PC28 0x00100000 -#define QEPIER_PC29 0x00080000 -#define QEPIER_PD12 0x00040000 -#define QEPIER_PD13 0x00020000 -#define QEPIER_PD16 0x00010000 -#define QEPIER_PD17 0x00008000 -#define QEPIER_PD26 0x00004000 -#define QEPIER_PD27 0x00002000 -#define QEPIER_PE12 0x00001000 -#define QEPIER_PE13 0x00000800 -#define QEPIER_PE24 0x00000400 -#define QEPIER_PE25 0x00000200 -#define QEPIER_PE26 0x00000100 -#define QEPIER_PE27 0x00000080 -#define QEPIER_PE31 0x00000040 -#define QEPIER_PF20 0x00000020 -#define QEPIER_PG31 0x00000010 -#define QEPIER_RES ~(QEPIER_PA15|QEPIER_PA16|QEPIER_PA29|QEPIER_PA30|QEPIER_PB3 \ - |QEPIER_PB5|QEPIER_PB12|QEPIER_PB13|QEPIER_PB26|QEPIER_PB27 \ - |QEPIER_PC27|QEPIER_PC28|QEPIER_PC29|QEPIER_PD12|QEPIER_PD13 \ - |QEPIER_PD16|QEPIER_PD17|QEPIER_PD26|QEPIER_PD27|QEPIER_PE12 \ - |QEPIER_PE13|QEPIER_PE24|QEPIER_PE25|QEPIER_PE26|QEPIER_PE27 \ - |QEPIER_PE31|QEPIER_PF20|QEPIER_PG31) u32 qepimr; /* QE Ports Interrupt Mask Register */ -#define QEPIMR_PA15 0x80000000 -#define QEPIMR_PA16 0x40000000 -#define QEPIMR_PA29 0x20000000 -#define QEPIMR_PA30 0x10000000 -#define QEPIMR_PB3 0x08000000 -#define QEPIMR_PB5 0x04000000 -#define QEPIMR_PB12 0x02000000 -#define QEPIMR_PB13 0x01000000 -#define QEPIMR_PB26 0x00800000 -#define QEPIMR_PB27 0x00400000 -#define QEPIMR_PC27 0x00200000 -#define QEPIMR_PC28 0x00100000 -#define QEPIMR_PC29 0x00080000 -#define QEPIMR_PD12 0x00040000 -#define QEPIMR_PD13 0x00020000 -#define QEPIMR_PD16 0x00010000 -#define QEPIMR_PD17 0x00008000 -#define QEPIMR_PD26 0x00004000 -#define QEPIMR_PD27 0x00002000 -#define QEPIMR_PE12 0x00001000 -#define QEPIMR_PE13 0x00000800 -#define QEPIMR_PE24 0x00000400 -#define QEPIMR_PE25 0x00000200 -#define QEPIMR_PE26 0x00000100 -#define QEPIMR_PE27 0x00000080 -#define QEPIMR_PE31 0x00000040 -#define QEPIMR_PF20 0x00000020 -#define QEPIMR_PG31 0x00000010 -#define QEPIMR_RES ~(QEPIMR_PA15|QEPIMR_PA16|QEPIMR_PA29|QEPIMR_PA30|QEPIMR_PB3 \ - |QEPIMR_PB5|QEPIMR_PB12|QEPIMR_PB13|QEPIMR_PB26|QEPIMR_PB27 \ - |QEPIMR_PC27|QEPIMR_PC28|QEPIMR_PC29|QEPIMR_PD12|QEPIMR_PD13 \ - |QEPIMR_PD16|QEPIMR_PD17|QEPIMR_PD26|QEPIMR_PD27|QEPIMR_PE12 \ - |QEPIMR_PE13|QEPIMR_PE24|QEPIMR_PE25|QEPIMR_PE26|QEPIMR_PE27 \ - |QEPIMR_PE31|QEPIMR_PF20|QEPIMR_PG31) u32 qepicr; /* QE Ports Interrupt Control Register */ -#define QEPICR_PA15 0x80000000 -#define QEPICR_PA16 0x40000000 -#define QEPICR_PA29 0x20000000 -#define QEPICR_PA30 0x10000000 -#define QEPICR_PB3 0x08000000 -#define QEPICR_PB5 0x04000000 -#define QEPICR_PB12 0x02000000 -#define QEPICR_PB13 0x01000000 -#define QEPICR_PB26 0x00800000 -#define QEPICR_PB27 0x00400000 -#define QEPICR_PC27 0x00200000 -#define QEPICR_PC28 0x00100000 -#define QEPICR_PC29 0x00080000 -#define QEPICR_PD12 0x00040000 -#define QEPICR_PD13 0x00020000 -#define QEPICR_PD16 0x00010000 -#define QEPICR_PD17 0x00008000 -#define QEPICR_PD26 0x00004000 -#define QEPICR_PD27 0x00002000 -#define QEPICR_PE12 0x00001000 -#define QEPICR_PE13 0x00000800 -#define QEPICR_PE24 0x00000400 -#define QEPICR_PE25 0x00000200 -#define QEPICR_PE26 0x00000100 -#define QEPICR_PE27 0x00000080 -#define QEPICR_PE31 0x00000040 -#define QEPICR_PF20 0x00000020 -#define QEPICR_PG31 0x00000010 -#define QEPICR_RES ~(QEPICR_PA15|QEPICR_PA16|QEPICR_PA29|QEPICR_PA30|QEPICR_PB3 \ - |QEPICR_PB5|QEPICR_PB12|QEPICR_PB13|QEPICR_PB26|QEPICR_PB27 \ - |QEPICR_PC27|QEPICR_PC28|QEPICR_PC29|QEPICR_PD12|QEPICR_PD13 \ - |QEPICR_PD16|QEPICR_PD17|QEPICR_PD26|QEPICR_PD27|QEPICR_PE12 \ - |QEPICR_PE13|QEPICR_PE24|QEPICR_PE25|QEPICR_PE26|QEPICR_PE27 \ - |QEPICR_PE31|QEPICR_PF20|QEPICR_PG31) u8 res1[0xE8]; } qepi83xx_t; /* - * general purpose I/O module + * QE Parallel I/O Ports */ typedef struct gpio_n { u32 podr; /* Open Drain Register */ @@ -879,238 +245,93 @@ typedef struct gpio_n { u32 ppar2; /* Pin Assignment Register 2 */ } gpio_n_t; -typedef struct gpio83xx { +typedef struct qegpio83xx { gpio_n_t ioport[0x7]; u8 res0[0x358]; -} gpio83xx_t; +} qepio83xx_t; /* * QE Secondary Bus Access Windows */ - typedef struct qesba83xx { u32 lbmcsar; /* Local bus memory controller start address */ -#define LBMCSAR_SA 0x000FFFFF /* 20 most-significant bits of the start address */ -#define LBMCSAR_RES ~(LBMCSAR_SA) u32 sdmcsar; /* Secondary DDR memory controller start address */ -#define SDMCSAR_SA 0x000FFFFF /* 20 most-significant bits of the start address */ -#define SDMCSAR_RES ~(SDMCSAR_SA) u8 res0[0x38]; u32 lbmcear; /* Local bus memory controller end address */ -#define LBMCEAR_EA 0x000FFFFF /* 20 most-significant bits of the end address */ -#define LBMCEAR_RES ~(LBMCEAR_EA) u32 sdmcear; /* Secondary DDR memory controller end address */ -#define SDMCEAR_EA 0x000FFFFF /* 20 most-significant bits of the end address */ -#define SDMCEAR_RES ~(SDMCEAR_EA) u8 res1[0x38]; - u32 lbmcar; /* Local bus memory controller attributes */ -#define LBMCAR_WEN 0x00000001 /* Forward transactions to the QE local bus */ -#define LBMCAR_RES ~(LBMCAR_WEN) + u32 lbmcar; /* Local bus memory controller attributes */ u32 sdmcar; /* Secondary DDR memory controller attributes */ -#define SDMCAR_WEN 0x00000001 /* Forward transactions to the second DDR bus */ -#define SDMCAR_RES ~(SDMCAR_WEN) - u8 res2[0x778]; + u8 res2[0x378]; } qesba83xx_t; -#endif /* * DDR Memory Controller Memory Map */ typedef struct ddr_cs_bnds { u32 csbnds; -#define CSBNDS_SA 0x00FF0000 -#define CSBNDS_SA_SHIFT 8 -#define CSBNDS_EA 0x000000FF -#define CSBNDS_EA_SHIFT 24 u8 res0[4]; } ddr_cs_bnds_t; typedef struct ddr83xx { - ddr_cs_bnds_t csbnds[4]; /**< Chip Select x Memory Bounds */ + ddr_cs_bnds_t csbnds[4];/* Chip Select x Memory Bounds */ u8 res0[0x60]; - u32 cs_config[4]; /**< Chip Select x Configuration */ -#define CSCONFIG_EN 0x80000000 -#define CSCONFIG_AP 0x00800000 -#define CSCONFIG_ROW_BIT 0x00000700 -#define CSCONFIG_ROW_BIT_12 0x00000000 -#define CSCONFIG_ROW_BIT_13 0x00000100 -#define CSCONFIG_ROW_BIT_14 0x00000200 -#define CSCONFIG_COL_BIT 0x00000007 -#define CSCONFIG_COL_BIT_8 0x00000000 -#define CSCONFIG_COL_BIT_9 0x00000001 -#define CSCONFIG_COL_BIT_10 0x00000002 -#define CSCONFIG_COL_BIT_11 0x00000003 - u8 res1[0x78]; - u32 timing_cfg_1; /**< SDRAM Timing Configuration 1 */ -#define TIMING_CFG1_PRETOACT 0x70000000 -#define TIMING_CFG1_PRETOACT_SHIFT 28 -#define TIMING_CFG1_ACTTOPRE 0x0F000000 -#define TIMING_CFG1_ACTTOPRE_SHIFT 24 -#define TIMING_CFG1_ACTTORW 0x00700000 -#define TIMING_CFG1_ACTTORW_SHIFT 20 -#define TIMING_CFG1_CASLAT 0x00070000 -#define TIMING_CFG1_CASLAT_SHIFT 16 -#define TIMING_CFG1_REFREC 0x0000F000 -#define TIMING_CFG1_REFREC_SHIFT 12 -#define TIMING_CFG1_WRREC 0x00000700 -#define TIMING_CFG1_WRREC_SHIFT 8 -#define TIMING_CFG1_ACTTOACT 0x00000070 -#define TIMING_CFG1_ACTTOACT_SHIFT 4 -#define TIMING_CFG1_WRTORD 0x00000007 -#define TIMING_CFG1_WRTORD_SHIFT 0 -#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */ -#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ - - u32 timing_cfg_2; /**< SDRAM Timing Configuration 2 */ -#define TIMING_CFG2_CPO 0x0F000000 -#define TIMING_CFG2_CPO_SHIFT 24 -#define TIMING_CFG2_ACSM 0x00080000 -#define TIMING_CFG2_WR_DATA_DELAY 0x00001C00 -#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10 -#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ - - u32 sdram_cfg; /**< SDRAM Control Configuration */ -#define SDRAM_CFG_MEM_EN 0x80000000 -#define SDRAM_CFG_SREN 0x40000000 -#define SDRAM_CFG_ECC_EN 0x20000000 -#define SDRAM_CFG_RD_EN 0x10000000 -#define SDRAM_CFG_SDRAM_TYPE 0x03000000 -#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 -#define SDRAM_CFG_DYN_PWR 0x00200000 -#define SDRAM_CFG_32_BE 0x00080000 -#define SDRAM_CFG_8_BE 0x00040000 -#define SDRAM_CFG_NCAP 0x00020000 -#define SDRAM_CFG_2T_EN 0x00008000 -#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 - + u32 cs_config[4]; /* Chip Select x Configuration */ + u8 res1[0x70]; + u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */ + u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */ + u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */ + u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */ + u32 sdram_cfg; /* SDRAM Control Configuration */ + u32 sdram_cfg2; /* SDRAM Control Configuration 2 */ + u32 sdram_mode; /* SDRAM Mode Configuration */ + u32 sdram_mode2; /* SDRAM Mode Configuration 2 */ + u32 sdram_md_cntl; /* SDRAM Mode Control */ + u32 sdram_interval; /* SDRAM Interval Configuration */ + u32 ddr_data_init; /* SDRAM Data Initialization */ u8 res2[4]; - u32 sdram_mode; /**< SDRAM Mode Configuration */ -#define SDRAM_MODE_ESD 0xFFFF0000 -#define SDRAM_MODE_ESD_SHIFT 16 -#define SDRAM_MODE_SD 0x0000FFFF -#define SDRAM_MODE_SD_SHIFT 0 -#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */ -#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */ -#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */ -#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */ -#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */ -#define DDR_MODE_WEAK 0x0002 /* weak drivers */ -#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */ -#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */ -#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */ -#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */ -#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */ -#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */ -#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */ -#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */ -#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */ -#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */ -#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125 µs */ -#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */ -#define DDR_MODE_MODEREG 0x0000 /* select mode register */ - - u8 res3[8]; - u32 sdram_interval; /**< SDRAM Interval Configuration */ -#define SDRAM_INTERVAL_REFINT 0x3FFF0000 -#define SDRAM_INTERVAL_REFINT_SHIFT 16 -#define SDRAM_INTERVAL_BSTOPRE 0x00003FFF -#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0 - u8 res9[8]; - u32 sdram_clk_cntl; -#define DDR_SDRAM_CLK_CNTL_SS_EN 0x80000000 -#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025 0x01000000 -#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 0x02000000 -#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075 0x03000000 -#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_1 0x04000000 - - u8 res4[0xCCC]; - u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */ - u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */ - u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */ -#define ECC_ERR_INJECT_EMB (0x80000000>>22) /* ECC Mirror Byte */ -#define ECC_ERR_INJECT_EIEN (0x80000000>>23) /* Error Injection Enable */ -#define ECC_ERR_INJECT_EEIM (0xff000000>>24) /* ECC Erroe Injection Enable */ -#define ECC_ERR_INJECT_EEIM_SHIFT 0 - u8 res5[0x14]; - u32 capture_data_hi; /**< Memory Data Path Read Capture High */ - u32 capture_data_lo; /**< Memory Data Path Read Capture Low */ - u32 capture_ecc; /**< Memory Data Path Read Capture ECC */ -#define CAPTURE_ECC_ECE (0xff000000>>24) -#define CAPTURE_ECC_ECE_SHIFT 0 + u32 sdram_clk_cntl; /* SDRAM Clock Control */ + u8 res3[0x14]; + u32 ddr_init_addr; /* DDR training initialization address */ + u32 ddr_init_ext_addr; /* DDR training initialization extended address */ + u8 res4[0xAA8]; + u32 ddr_ip_rev1; /* DDR IP block revision 1 */ + u32 ddr_ip_rev2; /* DDR IP block revision 2 */ + u8 res5[0x200]; + u32 data_err_inject_hi; /* Memory Data Path Error Injection Mask High */ + u32 data_err_inject_lo; /* Memory Data Path Error Injection Mask Low */ + u32 ecc_err_inject; /* Memory Data Path Error Injection Mask ECC */ u8 res6[0x14]; - u32 err_detect; /**< Memory Error Detect */ -#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ -#define ECC_ERROR_DETECT_MBE (0x80000000>>28) /* Multiple-Bit Error */ -#define ECC_ERROR_DETECT_SBE (0x80000000>>29) /* Single-Bit ECC Error Pickup */ -#define ECC_ERROR_DETECT_MSE (0x80000000>>31) /* Memory Select Error */ - u32 err_disable; /**< Memory Error Disable */ -#define ECC_ERROR_DISABLE_MBED (0x80000000>>28) /* Multiple-Bit ECC Error Disable */ -#define ECC_ERROR_DISABLE_SBED (0x80000000>>29) /* Sinle-Bit ECC Error disable */ -#define ECC_ERROR_DISABLE_MSED (0x80000000>>31) /* Memory Select Error Disable */ -#define ECC_ERROR_ENABLE ~(ECC_ERROR_DISABLE_MSED|ECC_ERROR_DISABLE_SBED|ECC_ERROR_DISABLE_MBED) - u32 err_int_en; /**< Memory Error Interrupt Enable */ -#define ECC_ERR_INT_EN_MBEE (0x80000000>>28) /* Multiple-Bit ECC Error Interrupt Enable */ -#define ECC_ERR_INT_EN_SBEE (0x80000000>>29) /* Single-Bit ECC Error Interrupt Enable */ -#define ECC_ERR_INT_EN_MSEE (0x80000000>>31) /* Memory Select Error Interrupt Enable */ -#define ECC_ERR_INT_DISABLE ~(ECC_ERR_INT_EN_MBEE|ECC_ERR_INT_EN_SBEE|ECC_ERR_INT_EN_MSEE) - u32 capture_attributes; /**< Memory Error Attributes Capture */ -#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ -#define ECC_CAPT_ATTR_BNUM_SHIFT 28 -#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ -#define ECC_CAPT_ATTR_TSIZ_FOUR_DW 0 -#define ECC_CAPT_ATTR_TSIZ_ONE_DW 1 -#define ECC_CAPT_ATTR_TSIZ_TWO_DW 2 -#define ECC_CAPT_ATTR_TSIZ_THREE_DW 3 -#define ECC_CAPT_ATTR_TSIZ_SHIFT 24 -#define ECC_CAPT_ATTR_TSRC (0xf8000000>>11) /* Transaction Source */ -#define ECC_CAPT_ATTR_TSRC_E300_CORE_DT 0x0 -#define ECC_CAPT_ATTR_TSRC_E300_CORE_IF 0x2 -#define ECC_CAPT_ATTR_TSRC_TSEC1 0x4 -#define ECC_CAPT_ATTR_TSRC_TSEC2 0x5 -#define ECC_CAPT_ATTR_TSRC_USB (0x06|0x07) -#define ECC_CAPT_ATTR_TSRC_ENCRYPT 0x8 -#define ECC_CAPT_ATTR_TSRC_I2C 0x9 -#define ECC_CAPT_ATTR_TSRC_JTAG 0xA -#define ECC_CAPT_ATTR_TSRC_PCI1 0xD -#define ECC_CAPT_ATTR_TSRC_PCI2 0xE -#define ECC_CAPT_ATTR_TSRC_DMA 0xF -#define ECC_CAPT_ATTR_TSRC_SHIFT 16 -#define ECC_CAPT_ATTR_TTYP (0xe0000000>>18) /* Transaction Type */ -#define ECC_CAPT_ATTR_TTYP_WRITE 0x1 -#define ECC_CAPT_ATTR_TTYP_READ 0x2 -#define ECC_CAPT_ATTR_TTYP_R_M_W 0x3 -#define ECC_CAPT_ATTR_TTYP_SHIFT 12 -#define ECC_CAPT_ATTR_VLD (0x80000000>>31) /* Valid */ - u32 capture_address; /**< Memory Error Address Capture */ - u32 capture_ext_address;/**< Memory Error Extended Address Capture */ - u32 err_sbe; /**< Memory Single-Bit ECC Error Management */ -#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255 */ -#define ECC_ERROR_MAN_SBET_SHIFT 16 -#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */ -#define ECC_ERROR_MAN_SBEC_SHIFT 0 - u8 res7[0xA4]; + u32 capture_data_hi; /* Memory Data Path Read Capture High */ + u32 capture_data_lo; /* Memory Data Path Read Capture Low */ + u32 capture_ecc; /* Memory Data Path Read Capture ECC */ + u8 res7[0x14]; + u32 err_detect; /* Memory Error Detect */ + u32 err_disable; /* Memory Error Disable */ + u32 err_int_en; /* Memory Error Interrupt Enable */ + u32 capture_attributes; /* Memory Error Attributes Capture */ + u32 capture_address; /* Memory Error Address Capture */ + u32 capture_ext_address;/* Memory Error Extended Address Capture */ + u32 err_sbe; /* Memory Single-Bit ECC Error Management */ + u8 res8[0xA4]; u32 debug_reg; - u8 res8[0xFC]; + u8 res9[0xFC]; } ddr83xx_t; /* - * I2C1 Controller - */ - -/* * DUART */ typedef struct duart83xx { - u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */ - u8 uier_udmb; /**< combined register for UIER and UDMB */ - u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */ - u8 ulcr; /**< line control register */ - u8 umcr; /**< MODEM control register */ - u8 ulsr; /**< line status register */ - u8 umsr; /**< MODEM status register */ - u8 uscr; /**< scratch register */ + u8 urbr_ulcr_udlb; /* combined register for URBR, UTHR and UDLB */ + u8 uier_udmb; /* combined register for UIER and UDMB */ + u8 uiir_ufcr_uafr; /* combined register for UIIR, UFCR and UAFR */ + u8 ulcr; /* line control register */ + u8 umcr; /* MODEM control register */ + u8 ulsr; /* line status register */ + u8 umsr; /* MODEM status register */ + u8 uscr; /* scratch register */ u8 res0[8]; - u8 udsr; /**< DMA status register */ + u8 udsr; /* DMA status register */ u8 res1[3]; u8 res2[0xEC]; } duart83xx_t; @@ -1119,75 +340,52 @@ typedef struct duart83xx { * Local Bus Controller Registers */ typedef struct lbus_bank { - u32 br; /**< Base Register */ - u32 or; /**< Base Register */ + u32 br; /* Base Register */ + u32 or; /* Option Register */ } lbus_bank_t; typedef struct lbus83xx { lbus_bank_t bank[8]; u8 res0[0x28]; - u32 mar; /**< UPM Address Register */ + u32 mar; /* UPM Address Register */ u8 res1[0x4]; - u32 mamr; /**< UPMA Mode Register */ - u32 mbmr; /**< UPMB Mode Register */ - u32 mcmr; /**< UPMC Mode Register */ + u32 mamr; /* UPMA Mode Register */ + u32 mbmr; /* UPMB Mode Register */ + u32 mcmr; /* UPMC Mode Register */ u8 res2[0x8]; - u32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ - u32 mdr; /**< UPM Data Register */ + u32 mrtpr; /* Memory Refresh Timer Prescaler Register */ + u32 mdr; /* UPM Data Register */ u8 res3[0x8]; - u32 lsdmr; /**< SDRAM Mode Register */ + u32 lsdmr; /* SDRAM Mode Register */ u8 res4[0x8]; - u32 lurt; /**< UPM Refresh Timer */ - u32 lsrt; /**< SDRAM Refresh Timer */ + u32 lurt; /* UPM Refresh Timer */ + u32 lsrt; /* SDRAM Refresh Timer */ u8 res5[0x8]; - u32 ltesr; /**< Transfer Error Status Register */ - u32 ltedr; /**< Transfer Error Disable Register */ - u32 lteir; /**< Transfer Error Interrupt Register */ - u32 lteatr; /**< Transfer Error Attributes Register */ - u32 ltear; /**< Transfer Error Address Register */ + u32 ltesr; /* Transfer Error Status Register */ + u32 ltedr; /* Transfer Error Disable Register */ + u32 lteir; /* Transfer Error Interrupt Register */ + u32 lteatr; /* Transfer Error Attributes Register */ + u32 ltear; /* Transfer Error Address Register */ u8 res6[0xC]; - u32 lbcr; /**< Configuration Register */ -#define LBCR_LDIS 0x80000000 -#define LBCR_LDIS_SHIFT 31 -#define LBCR_BCTLC 0x00C00000 -#define LBCR_BCTLC_SHIFT 22 -#define LBCR_LPBSE 0x00020000 -#define LBCR_LPBSE_SHIFT 17 -#define LBCR_EPAR 0x00010000 -#define LBCR_EPAR_SHIFT 16 -#define LBCR_BMT 0x0000FF00 -#define LBCR_BMT_SHIFT 8 - u32 lcrr; /**< Clock Ratio Register */ -#define LCRR_DBYP 0x80000000 -#define LCRR_DBYP_SHIFT 31 -#define LCRR_BUFCMDC 0x30000000 -#define LCRR_BUFCMDC_SHIFT 28 -#define LCRR_ECL 0x03000000 -#define LCRR_ECL_SHIFT 24 -#define LCRR_EADC 0x00030000 -#define LCRR_EADC_SHIFT 16 -#define LCRR_CLKDIV 0x0000000F -#define LCRR_CLKDIV_SHIFT 0 - + u32 lbcr; /* Configuration Register */ + u32 lcrr; /* Clock Ratio Register */ u8 res7[0x28]; u8 res8[0xF00]; } lbus83xx_t; -#if defined (CONFIG_MPC8349) /* * Serial Peripheral Interface */ typedef struct spi83xx { - u32 mode; /**< mode register */ - u32 event; /**< event register */ - u32 mask; /**< mask register */ - u32 com; /**< command register */ + u32 mode; /* mode register */ + u32 event; /* event register */ + u32 mask; /* mask register */ + u32 com; /* command register */ u8 res0[0x10]; - u32 tx; /**< transmit register */ - u32 rx; /**< receive register */ - u8 res1[0xD8]; + u32 tx; /* transmit register */ + u32 rx; /* receive register */ + u8 res1[0xFD8]; } spi83xx_t; -#endif /* * DMA/Messaging Unit @@ -1197,21 +395,17 @@ typedef struct dma83xx { u32 omisr; /* 0x30 Outbound message interrupt status register */ u32 omimr; /* 0x34 Outbound message interrupt mask register */ u32 res1[0x6]; /* 0x38-0x49 reserved */ - u32 imr0; /* 0x50 Inbound message register 0 */ u32 imr1; /* 0x54 Inbound message register 1 */ u32 omr0; /* 0x58 Outbound message register 0 */ u32 omr1; /* 0x5C Outbound message register 1 */ - u32 odr; /* 0x60 Outbound doorbell register */ u32 res2; /* 0x64-0x67 reserved */ u32 idr; /* 0x68 Inbound doorbell register */ u32 res3[0x5]; /* 0x6C-0x79 reserved */ - u32 imisr; /* 0x80 Inbound message interrupt status register */ u32 imimr; /* 0x84 Inbound message interrupt mask register */ u32 res4[0x1E]; /* 0x88-0x99 reserved */ - u32 dmamr0; /* 0x100 DMA 0 mode register */ u32 dmasr0; /* 0x104 DMA 0 status register */ u32 dmacdar0; /* 0x108 DMA 0 current descriptor address register */ @@ -1223,7 +417,6 @@ typedef struct dma83xx { u32 dmabcr0; /* 0x120 DMA 0 byte count register */ u32 dmandar0; /* 0x124 DMA 0 next descriptor address register */ u32 res8[0x16]; /* 0x128-0x179 reserved */ - u32 dmamr1; /* 0x180 DMA 1 mode register */ u32 dmasr1; /* 0x184 DMA 1 status register */ u32 dmacdar1; /* 0x188 DMA 1 current descriptor address register */ @@ -1235,7 +428,6 @@ typedef struct dma83xx { u32 dmabcr1; /* 0x1A0 DMA 1 byte count register */ u32 dmandar1; /* 0x1A4 DMA 1 next descriptor address register */ u32 res12[0x16]; /* 0x1A8-0x199 reserved */ - u32 dmamr2; /* 0x200 DMA 2 mode register */ u32 dmasr2; /* 0x204 DMA 2 status register */ u32 dmacdar2; /* 0x208 DMA 2 current descriptor address register */ @@ -1247,7 +439,6 @@ typedef struct dma83xx { u32 dmabcr2; /* 0x220 DMA 2 byte count register */ u32 dmandar2; /* 0x224 DMA 2 next descriptor address register */ u32 res16[0x16]; /* 0x228-0x279 reserved */ - u32 dmamr3; /* 0x280 DMA 3 mode register */ u32 dmasr3; /* 0x284 DMA 3 status register */ u32 dmacdar3; /* 0x288 DMA 3 current descriptor address register */ @@ -1258,39 +449,15 @@ typedef struct dma83xx { u32 res19; /* 0x29C reserved */ u32 dmabcr3; /* 0x2A0 DMA 3 byte count register */ u32 dmandar3; /* 0x2A4 DMA 3 next descriptor address register */ - u32 dmagsr; /* 0x2A8 DMA general status register */ u32 res20[0x15]; /* 0x2AC-0x2FF reserved */ } dma83xx_t; -/* DMAMRn bits */ -#define DMA_CHANNEL_START (0x00000001) /* Bit - DMAMRn CS */ -#define DMA_CHANNEL_TRANSFER_MODE_DIRECT (0x00000004) /* Bit - DMAMRn CTM */ -#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN (0x00001000) /* Bit - DMAMRn SAHE */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B (0x00000000) /* 2Bit- DMAMRn SAHTS 1byte */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B (0x00004000) /* 2Bit- DMAMRn SAHTS 2bytes */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B (0x00008000) /* 2Bit- DMAMRn SAHTS 4bytes */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B (0x0000c000) /* 2Bit- DMAMRn SAHTS 8bytes */ -#define DMA_CHANNEL_SNOOP (0x00010000) /* Bit - DMAMRn DMSEN */ - -/* DMASRn bits */ -#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */ -#define DMA_CHANNEL_TRANSFER_ERROR (0x00000080) /* Bit - DMASRn TE */ - /* * PCI Software Configuration Registers */ typedef struct pciconf83xx { u32 config_address; -#define PCI_CONFIG_ADDRESS_EN 0x80000000 -#define PCI_CONFIG_ADDRESS_BN_SHIFT 16 -#define PCI_CONFIG_ADDRESS_BN_MASK 0x00ff0000 -#define PCI_CONFIG_ADDRESS_DN_SHIFT 11 -#define PCI_CONFIG_ADDRESS_DN_MASK 0x0000f800 -#define PCI_CONFIG_ADDRESS_FN_SHIFT 8 -#define PCI_CONFIG_ADDRESS_FN_MASK 0x00000700 -#define PCI_CONFIG_ADDRESS_RN_SHIFT 0 -#define PCI_CONFIG_ADDRESS_RN_MASK 0x000000fc u32 config_data; u32 int_ack; u8 res[116]; @@ -1313,34 +480,6 @@ typedef struct pci_outbound_window { */ typedef struct ios83xx { pot83xx_t pot[6]; -#define POTAR_TA_MASK 0x000fffff -#define POBAR_BA_MASK 0x000fffff -#define POCMR_EN 0x80000000 -#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */ -#define POCMR_SE 0x20000000 /* streaming enable */ -#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */ -#define POCMR_CM_MASK 0x000fffff -#define POCMR_CM_4G 0x00000000 -#define POCMR_CM_2G 0x00080000 -#define POCMR_CM_1G 0x000C0000 -#define POCMR_CM_512M 0x000E0000 -#define POCMR_CM_256M 0x000F0000 -#define POCMR_CM_128M 0x000F8000 -#define POCMR_CM_64M 0x000FC000 -#define POCMR_CM_32M 0x000FE000 -#define POCMR_CM_16M 0x000FF000 -#define POCMR_CM_8M 0x000FF800 -#define POCMR_CM_4M 0x000FFC00 -#define POCMR_CM_2M 0x000FFE00 -#define POCMR_CM_1M 0x000FFF00 -#define POCMR_CM_512K 0x000FFF80 -#define POCMR_CM_256K 0x000FFFC0 -#define POCMR_CM_128K 0x000FFFE0 -#define POCMR_CM_64K 0x000FFFF0 -#define POCMR_CM_32K 0x000FFFF8 -#define POCMR_CM_16K 0x000FFFFC -#define POCMR_CM_8K 0x000FFFFE -#define POCMR_CM_4K 0x000FFFFF u8 res0[0x60]; u32 pmcr; u8 res1[4]; @@ -1353,74 +492,13 @@ typedef struct ios83xx { */ typedef struct pcictrl83xx { u32 esr; -#define ESR_MERR 0x80000000 -#define ESR_APAR 0x00000400 -#define ESR_PCISERR 0x00000200 -#define ESR_MPERR 0x00000100 -#define ESR_TPERR 0x00000080 -#define ESR_NORSP 0x00000040 -#define ESR_TABT 0x00000020 u32 ecdr; -#define ECDR_APAR 0x00000400 -#define ECDR_PCISERR 0x00000200 -#define ECDR_MPERR 0x00000100 -#define ECDR_TPERR 0x00000080 -#define ECDR_NORSP 0x00000040 -#define ECDR_TABT 0x00000020 u32 eer; -#define EER_APAR 0x00000400 -#define EER_PCISERR 0x00000200 -#define EER_MPERR 0x00000100 -#define EER_TPERR 0x00000080 -#define EER_NORSP 0x00000040 -#define EER_TABT 0x00000020 u32 eatcr; -#define EATCR_ERRTYPR_MASK 0x70000000 -#define EATCR_ERRTYPR_APR 0x00000000 /* address parity error */ -#define EATCR_ERRTYPR_WDPR 0x10000000 /* write data parity error */ -#define EATCR_ERRTYPR_RDPR 0x20000000 /* read data parity error */ -#define EATCR_ERRTYPR_MA 0x30000000 /* master abort */ -#define EATCR_ERRTYPR_TA 0x40000000 /* target abort */ -#define EATCR_ERRTYPR_SE 0x50000000 /* system error indication received */ -#define EATCR_ERRTYPR_PEA 0x60000000 /* parity error indication received on a read */ -#define EATCR_ERRTYPR_PEW 0x70000000 /* parity error indication received on a write */ -#define EATCR_BN_MASK 0x0f000000 /* beat number */ -#define EATCR_BN_1st 0x00000000 -#define EATCR_BN_2ed 0x01000000 -#define EATCR_BN_3rd 0x02000000 -#define EATCR_BN_4th 0x03000000 -#define EATCR_BN_5th 0x0400000 -#define EATCR_BN_6th 0x05000000 -#define EATCR_BN_7th 0x06000000 -#define EATCR_BN_8th 0x07000000 -#define EATCR_BN_9th 0x08000000 -#define EATCR_TS_MASK 0x00300000 /* transaction size */ -#define EATCR_TS_4 0x00000000 -#define EATCR_TS_1 0x00100000 -#define EATCR_TS_2 0x00200000 -#define EATCR_TS_3 0x00300000 -#define EATCR_ES_MASK 0x000f0000 /* error source */ -#define EATCR_ES_EM 0x00000000 /* external master */ -#define EATCR_ES_DMA 0x00050000 -#define EATCR_CMD_MASK 0x0000f000 -#if defined (CONFIG_MPC8349) -#define EATCR_HBE_MASK 0x00000f00 /* PCI high byte enable */ -#endif -#define EATCR_BE_MASK 0x000000f0 /* PCI byte enable */ -#if defined (CONFIG_MPC8349) -#define EATCR_HPB 0x00000004 /* high parity bit */ -#endif -#define EATCR_PB 0x00000002 /* parity bit */ -#define EATCR_VI 0x00000001 /* error information valid */ u32 eacr; u32 eeacr; -#if defined (CONFIG_MPC8349) u32 edlcr; u32 edhcr; -#elif defined (CONFIG_MPC8360) - u32 edcr; /* was edlcr */ - u8 res_edcr[0x4]; -#endif u32 gcr; u32 ecr; u32 gsr; @@ -1443,41 +521,8 @@ typedef struct pcictrl83xx { u8 res6[4]; u32 piwar0; u8 res7[132]; -#define PITAR_TA_MASK 0x000fffff -#define PIBAR_MASK 0xffffffff -#define PIEBAR_EBA_MASK 0x000fffff -#define PIWAR_EN 0x80000000 -#define PIWAR_PF 0x20000000 -#define PIWAR_RTT_MASK 0x000f0000 -#define PIWAR_RTT_NO_SNOOP 0x00040000 -#define PIWAR_RTT_SNOOP 0x00050000 -#define PIWAR_WTT_MASK 0x0000f000 -#define PIWAR_WTT_NO_SNOOP 0x00004000 -#define PIWAR_WTT_SNOOP 0x00005000 -#define PIWAR_IWS_MASK 0x0000003F -#define PIWAR_IWS_4K 0x0000000B -#define PIWAR_IWS_8K 0x0000000C -#define PIWAR_IWS_16K 0x0000000D -#define PIWAR_IWS_32K 0x0000000E -#define PIWAR_IWS_64K 0x0000000F -#define PIWAR_IWS_128K 0x00000010 -#define PIWAR_IWS_256K 0x00000011 -#define PIWAR_IWS_512K 0x00000012 -#define PIWAR_IWS_1M 0x00000013 -#define PIWAR_IWS_2M 0x00000014 -#define PIWAR_IWS_4M 0x00000015 -#define PIWAR_IWS_8M 0x00000016 -#define PIWAR_IWS_16M 0x00000017 -#define PIWAR_IWS_32M 0x00000018 -#define PIWAR_IWS_64M 0x00000019 -#define PIWAR_IWS_128M 0x0000001A -#define PIWAR_IWS_256M 0x0000001B -#define PIWAR_IWS_512M 0x0000001C -#define PIWAR_IWS_1G 0x0000001D -#define PIWAR_IWS_2G 0x0000001E } pcictrl83xx_t; -#if defined (CONFIG_MPC8349) /* * USB */ @@ -1491,7 +536,6 @@ typedef struct usb83xx { typedef struct tsec83xx { u8 fixme[0x1000]; } tsec83xx_t; -#endif /* * Security @@ -1500,581 +544,119 @@ typedef struct security83xx { u8 fixme[0x10000]; } security83xx_t; -#if defined (CONFIG_MPC8360) -/* - * iram - */ -typedef struct iram83xx { - u32 iadd; /* I-RAM address register */ - u32 idata; /* I-RAM data register */ - u8 res0[0x78]; -} iram83xx_t; - -/* - * Interrupt Controller - */ -typedef struct irq83xx { - u32 cicr; /* QE system interrupt configuration */ - u32 civec; /* QE system interrupt vector register */ - u32 cripnr; /* QE RISC interrupt pending register */ - u32 cipnr; /* QE system interrupt pending register */ - u32 cipxcc; /* QE interrupt priority register */ - u32 cipycc; /* QE interrupt priority register */ - u32 cipwcc; /* QE interrupt priority register */ - u32 cipzcc; /* QE interrupt priority register */ - u32 cimr; /* QE system interrupt mask register */ - u32 crimr; /* QE RISC interrupt mask register */ - u32 cicnr; /* QE system interrupt control register */ - u8 res0[0x4]; - u32 ciprta; /* QE system interrupt priority register for RISC tasks A */ - u32 ciprtb; /* QE system interrupt priority register for RISC tasks B */ - u8 res1[0x4]; - u32 cricr; /* QE system RISC interrupt control */ - u8 res2[0x20]; - u32 chivec; /* QE high system interrupt vector */ - u8 res3[0x1C]; -} irq83xx_t; - -/* - * Communications Processor - */ -typedef struct cp83xx { - u32 cecr; /* QE command register */ - u32 ceccr; /* QE controller configuration register */ - u32 cecdr; /* QE command data register */ - u8 res0[0xA]; - u16 ceter; /* QE timer event register */ - u8 res1[0x2]; - u16 cetmr; /* QE timers mask register */ - u32 cetscr; /* QE time-stamp timer control register */ - u32 cetsr1; /* QE time-stamp register 1 */ - u32 cetsr2; /* QE time-stamp register 2 */ - u8 res2[0x8]; - u32 cevter; /* QE virtual tasks event register */ - u32 cevtmr; /* QE virtual tasks mask register */ - u16 cercr; /* QE RAM control register */ - u8 res3[0x2]; - u8 res4[0x24]; - u16 ceexe1; /* QE external request 1 event register */ - u8 res5[0x2]; - u16 ceexm1; /* QE external request 1 mask register */ - u8 res6[0x2]; - u16 ceexe2; /* QE external request 2 event register */ - u8 res7[0x2]; - u16 ceexm2; /* QE external request 2 mask register */ - u8 res8[0x2]; - u16 ceexe3; /* QE external request 3 event register */ - u8 res9[0x2]; - u16 ceexm3; /* QE external request 3 mask register */ - u8 res10[0x2]; - u16 ceexe4; /* QE external request 4 event register */ - u8 res11[0x2]; - u16 ceexm4; /* QE external request 4 mask register */ - u8 res12[0x2]; - u8 res13[0x280]; -} cp83xx_t; - -/* - * QE Multiplexer - */ - -typedef struct qmx83xx { - u32 cmxgcr; /* CMX general clock route register */ - u32 cmxsi1cr_l; /* CMX SI1 clock route low register */ - u32 cmxsi1cr_h; /* CMX SI1 clock route high register */ - u32 cmxsi1syr; /* CMX SI1 SYNC route register */ - u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */ - u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */ - u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */ - u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */ - u32 cmxupcr; /* CMX UPC clock route register */ - u8 res0[0x1C]; -} qmx83xx_t; - -/* -* QE Timers -*/ - -typedef struct qet83xx { - u8 gtcfr1; /* Timer 1 and Timer 2 global configuration register */ - u8 res0[0x3]; - u8 gtcfr2; /* Timer 3 and timer 4 global configuration register */ - u8 res1[0xB]; - u16 gtmdr1; /* Timer 1 mode register */ - u16 gtmdr2; /* Timer 2 mode register */ - u16 gtrfr1; /* Timer 1 reference register */ - u16 gtrfr2; /* Timer 2 reference register */ - u16 gtcpr1; /* Timer 1 capture register */ - u16 gtcpr2; /* Timer 2 capture register */ - u16 gtcnr1; /* Timer 1 counter */ - u16 gtcnr2; /* Timer 2 counter */ - u16 gtmdr3; /* Timer 3 mode register */ - u16 gtmdr4; /* Timer 4 mode register */ - u16 gtrfr3; /* Timer 3 reference register */ - u16 gtrfr4; /* Timer 4 reference register */ - u16 gtcpr3; /* Timer 3 capture register */ - u16 gtcpr4; /* Timer 4 capture register */ - u16 gtcnr3; /* Timer 3 counter */ - u16 gtcnr4; /* Timer 4 counter */ - u16 gtevr1; /* Timer 1 event register */ - u16 gtevr2; /* Timer 2 event register */ - u16 gtevr3; /* Timer 3 event register */ - u16 gtevr4; /* Timer 4 event register */ - u16 gtps; /* Timer 1 prescale register */ - u8 res2[0x46]; -} qet83xx_t; - -/* -* spi -*/ - -typedef struct spi83xx { - u8 res0[0x20]; - u32 spmode; /* SPI mode register */ - u8 res1[0x2]; - u8 spie; /* SPI event register */ - u8 res2[0x1]; - u8 res3[0x2]; - u8 spim; /* SPI mask register */ - u8 res4[0x1]; - u8 res5[0x1]; - u8 spcom; /* SPI command register */ - u8 res6[0x2]; - u32 spitd; /* SPI transmit data register (cpu mode) */ - u32 spird; /* SPI receive data register (cpu mode) */ - u8 res7[0x8]; -} spi83xx_t; - -/* -* mcc -*/ - -typedef struct mcc83xx { - u32 mcce; /* MCC event register */ - u32 mccm; /* MCC mask register */ - u32 mccf; /* MCC configuration register */ - u32 merl; /* MCC emergency request level register */ - u8 res0[0xF0]; -} mcc83xx_t; - -/* -* brg -*/ - -typedef struct brg83xx { - u32 brgc1; /* BRG1 configuration register */ - u32 brgc2; /* BRG2 configuration register */ - u32 brgc3; /* BRG3 configuration register */ - u32 brgc4; /* BRG4 configuration register */ - u32 brgc5; /* BRG5 configuration register */ - u32 brgc6; /* BRG6 configuration register */ - u32 brgc7; /* BRG7 configuration register */ - u32 brgc8; /* BRG8 configuration register */ - u32 brgc9; /* BRG9 configuration register */ - u32 brgc10; /* BRG10 configuration register */ - u32 brgc11; /* BRG11 configuration register */ - u32 brgc12; /* BRG12 configuration register */ - u32 brgc13; /* BRG13 configuration register */ - u32 brgc14; /* BRG14 configuration register */ - u32 brgc15; /* BRG15 configuration register */ - u32 brgc16; /* BRG16 configuration register */ - u8 res0[0x40]; -} brg83xx_t; - -/* -* USB -*/ - -typedef struct usb83xx { - u8 usmod; /* USB mode register */ - u8 usadd; /* USB address register */ - u8 uscom; /* USB command register */ - u8 res0[0x1]; - u16 usep0; /* USB endpoint register 0 */ - u16 usep1; /* USB endpoint register 1 */ - u16 usep2; /* USB endpoint register 2 */ - u16 usep3; /* USB endpoint register 3 */ - u8 res1[0x4]; - u16 usber; /* USB event register */ - u8 res2[0x2]; - u16 usbmr; /* USB mask register */ - u8 res3[0x1]; - u8 usbs; /* USB status register */ - u32 ussft; /* USB start of frame timer */ - u8 res4[0x24]; -} usb83xx_t; - -/* -* SI -*/ - -typedef struct si1_83xx { - u16 siamr1; /* SI1 TDMA mode register */ - u16 sibmr1; /* SI1 TDMB mode register */ - u16 sicmr1; /* SI1 TDMC mode register */ - u16 sidmr1; /* SI1 TDMD mode register */ - u8 siglmr1_h; /* SI1 global mode register high */ - u8 res0[0x1]; - u8 sicmdr1_h; /* SI1 command register high */ - u8 res2[0x1]; - u8 sistr1_h; /* SI1 status register high */ - u8 res3[0x1]; - u16 sirsr1_h; /* SI1 RAM shadow address register high */ - u8 sitarc1; /* SI1 RAM counter Tx TDMA */ - u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ - u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ - u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ - u8 sirarc1; /* SI1 RAM counter Rx TDMA */ - u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ - u8 sircrc1; /* SI1 RAM counter Rx TDMC */ - u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ - u8 res4[0x8]; - u16 siemr1; /* SI1 TDME mode register 16 bits */ - u16 sifmr1; /* SI1 TDMF mode register 16 bits */ - u16 sigmr1; /* SI1 TDMG mode register 16 bits */ - u16 sihmr1; /* SI1 TDMH mode register 16 bits */ - u8 siglmg1_l; /* SI1 global mode register low 8 bits */ - u8 res5[0x1]; - u8 sicmdr1_l; /* SI1 command register low 8 bits */ - u8 res6[0x1]; - u8 sistr1_l; /* SI1 status register low 8 bits */ - u8 res7[0x1]; - u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */ - u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ - u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ - u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ - u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ - u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ - u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ - u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ - u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ - u8 res8[0x8]; - u32 siml1; /* SI1 multiframe limit register */ - u8 siedm1; /* SI1 extended diagnostic mode register */ - u8 res9[0xBB]; -} si1_83xx_t; - -/* -* SI Routing Tables -*/ - -typedef struct sir83xx { - u8 tx[0x400]; - u8 rx[0x400]; - u8 res0[0x800]; -} sir83xx_t; - -/* -* ucc -*/ - -typedef struct uslow { - u32 gumr_l; /* UCCx general mode register (low) */ - u32 gumr_h; /* UCCx general mode register (high) */ - u16 upsmr; /* UCCx protocol-specific mode register */ - u8 res0[0x2]; - u16 utodr; /* UCCx transmit on demand register */ - u16 udsr; /* UCCx data synchronization register */ - u16 ucce; /* UCCx event register */ - u8 res1[0x2]; - u16 uccm; /* UCCx mask register */ - u8 res2[0x1]; - u8 uccs; /* UCCx status register */ - u8 res3[0x1E8]; -} uslow_t; - -typedef struct ufast { - u32 gumr; /* UCCx general mode register */ - u32 upsmr; /* UCCx protocol-specific mode register */ - u16 utodr; /* UCCx transmit on demand register */ - u8 res0[0x2]; - u16 udsr; /* UCCx data synchronization register */ - u8 res1[0x2]; - u32 ucce; /* UCCx event register */ - u32 uccm; /* UCCx mask register. */ - u8 uccs; /* UCCx status register */ - u8 res2[0x7]; - u32 urfb; /* UCC receive FIFO base */ - u16 urfs; /* UCC receive FIFO size */ - u8 res3[0x2]; - u16 urfet; /* UCC receive FIFO emergency threshold */ - u16 urfset; /* UCC receive FIFO special emergency threshold */ - u32 utfb; /* UCC transmit FIFO base */ - u16 utfs; /* UCC transmit FIFO size */ - u8 res4[0x2]; - u16 utfet; /* UCC transmit FIFO emergency threshold */ - u8 res5[0x2]; - u16 utftt; /* UCC transmit FIFO transmit threshold */ - u8 res6[0x2]; - u16 utpt; /* UCC transmit polling timer */ - u32 urtry; /* UCC retry counter register */ - u8 res7[0x4C]; - u8 guemr; /* UCC general extended mode register */ - u8 res8[0x3]; - u8 res9[0x6C]; - u32 maccfg1; /* Mac configuration register #1 */ - u32 maccfg2; /* Mac configuration register #2 */ - u16 ipgifg; /* Interframe gap register */ - u8 res10[0x2]; - u32 hafdup; /* Half-duplex register */ - u8 res11[0xC]; - u32 emtr; /* Ethernet MAC test register */ - u32 miimcfg; /* MII mgmt configuration register */ - u32 miimcom; /* MII mgmt command register */ - u32 miimadd; /* MII mgmt address register */ - u32 miimcon; /* MII mgmt control register */ - u32 miistat; /* MII mgmt status register */ - u32 miimnd; /* MII mgmt indication register */ - u32 ifctl; /* Interface control register */ - u32 ifstat; /* Interface status register */ - u32 macstnaddr1; /* Station address part 1 register */ - u32 macstnaddr2; /* Station address part 2 register */ - u8 res12[0x8]; - u32 uempr; /* UCC Ethernet MAC parameter register */ - u32 utbipa; /* UCC TBI address */ - u16 uescr; /* UCC Ethernet statistics control register */ - u8 res13[0x26]; - u32 tx64; /* Transmit and receive 64-byte frame counter */ - u32 tx127; /* Transmit and receive 65- to 127-byte frame counter */ - u32 tx255; /* Transmit and receive 128- to 255-byte frame counter */ - u32 rx64; /* Receive and receive 64-byte frame counter */ - u32 rx127; /* Receive and receive 65- to 127-byte frame counter */ - u32 rx255; /* Receive and receive 128- to 255-byte frame counter */ - u32 txok; /* Transmit good bytes counter */ - u32 txcf; /* Transmit control frame counter */ - u32 tmca; /* Transmit multicast control frame counter */ - u32 tbca; /* Transmit broadcast packet counter */ - u32 rxfok; /* Receive frame OK counter */ - u32 rbyt; /* Receive good and bad bytes counter */ - u32 rxbok; /* Receive bytes OK counter */ - u32 rmca; /* Receive multicast packet counter */ - u32 rbca; /* Receive broadcast packet counter */ - u32 scar; /* Statistics carry register */ - u32 scam; /* Statistics carry mask register */ - u8 res14[0x3C]; -} ufast_t; - -typedef struct ucc83xx { - union { - uslow_t slow; - ufast_t fast; - }; -} ucc83xx_t; - -/* -* MultiPHY UTOPIA POS Controllers -*/ - -typedef struct upc83xx { - u32 upgcr; /* UTOPIA/POS general configuration register */ -#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ -#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ -#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ -#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing: */ -#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ - u32 uplpa; /* UTOPIA/POS last PHY address */ - u32 uphec; /* ATM HEC register */ - u32 upuc; /* UTOPIA/POS UCC configuration */ - u32 updc1; /* UTOPIA/POS device 1 configuration */ - u32 updc2; /* UTOPIA/POS device 2 configuration */ - u32 updc3; /* UTOPIA/POS device 3 configuration */ - u32 updc4; /* UTOPIA/POS device 4 configuration */ - u32 upstpa; /* UTOPIA/POS STPA threshold */ - u8 res0[0xC]; - u32 updrs1_h; /* UTOPIA/POS device 1 rate select */ - u32 updrs1_l; /* UTOPIA/POS device 1 rate select */ - u32 updrs2_h; /* UTOPIA/POS device 2 rate select */ - u32 updrs2_l; /* UTOPIA/POS device 2 rate select */ - u32 updrs3_h; /* UTOPIA/POS device 3 rate select */ - u32 updrs3_l; /* UTOPIA/POS device 3 rate select */ - u32 updrs4_h; /* UTOPIA/POS device 4 rate select */ - u32 updrs4_l; /* UTOPIA/POS device 4 rate select */ - u32 updrp1; /* UTOPIA/POS device 1 receive priority low */ - u32 updrp2; /* UTOPIA/POS device 2 receive priority low */ - u32 updrp3; /* UTOPIA/POS device 3 receive priority low */ - u32 updrp4; /* UTOPIA/POS device 4 receive priority low */ - u32 upde1; /* UTOPIA/POS device 1 event */ - u32 upde2; /* UTOPIA/POS device 2 event */ - u32 upde3; /* UTOPIA/POS device 3 event */ - u32 upde4; /* UTOPIA/POS device 4 event */ - u16 uprp1; - u16 uprp2; - u16 uprp3; - u16 uprp4; - u8 res1[0x8]; - u16 uptirr1_0; /* Device 1 transmit internal rate 0 */ - u16 uptirr1_1; /* Device 1 transmit internal rate 1 */ - u16 uptirr1_2; /* Device 1 transmit internal rate 2 */ - u16 uptirr1_3; /* Device 1 transmit internal rate 3 */ - u16 uptirr2_0; /* Device 2 transmit internal rate 0 */ - u16 uptirr2_1; /* Device 2 transmit internal rate 1 */ - u16 uptirr2_2; /* Device 2 transmit internal rate 2 */ - u16 uptirr2_3; /* Device 2 transmit internal rate 3 */ - u16 uptirr3_0; /* Device 3 transmit internal rate 0 */ - u16 uptirr3_1; /* Device 3 transmit internal rate 1 */ - u16 uptirr3_2; /* Device 3 transmit internal rate 2 */ - u16 uptirr3_3; /* Device 3 transmit internal rate 3 */ - u16 uptirr4_0; /* Device 4 transmit internal rate 0 */ - u16 uptirr4_1; /* Device 4 transmit internal rate 1 */ - u16 uptirr4_2; /* Device 4 transmit internal rate 2 */ - u16 uptirr4_3; /* Device 4 transmit internal rate 3 */ - u32 uper1; /* Device 1 port enable register */ - u32 uper2; /* Device 2 port enable register */ - u32 uper3; /* Device 3 port enable register */ - u32 uper4; /* Device 4 port enable register */ - u8 res2[0x150]; -} upc83xx_t; - -/* -* SDMA -*/ - -typedef struct sdma83xx { - u32 sdsr; /* Serial DMA status register */ - u32 sdmr; /* Serial DMA mode register */ - u32 sdtr1; /* SDMA system bus threshold register */ - u32 sdtr2; /* SDMA secondary bus threshold register */ - u32 sdhy1; /* SDMA system bus hysteresis register */ - u32 sdhy2; /* SDMA secondary bus hysteresis register */ - u32 sdta1; /* SDMA system bus address register */ - u32 sdta2; /* SDMA secondary bus address register */ - u32 sdtm1; /* SDMA system bus MSNUM register */ - u32 sdtm2; /* SDMA secondary bus MSNUM register */ - u8 res0[0x10]; - u32 sdaqr; /* SDMA address bus qualify register */ - u32 sdaqmr; /* SDMA address bus qualify mask register */ - u8 res1[0x4]; - u32 sdwbcr; /* SDMA CAM entries base register */ - u8 res2[0x38]; -} sdma83xx_t; - -/* -* Debug Space -*/ - -typedef struct dbg83xx { - u32 bpdcr; /* Breakpoint debug command register */ - u32 bpdsr; /* Breakpoint debug status register */ - u32 bpdmr; /* Breakpoint debug mask register */ - u32 bprmrr0; /* Breakpoint request mode risc register 0 */ - u32 bprmrr1; /* Breakpoint request mode risc register 1 */ - u8 res0[0x8]; - u32 bprmtr0; /* Breakpoint request mode trb register 0 */ - u32 bprmtr1; /* Breakpoint request mode trb register 1 */ - u8 res1[0x8]; - u32 bprmir; /* Breakpoint request mode immediate register */ - u32 bprmsr; /* Breakpoint request mode serial register */ - u32 bpemr; /* Breakpoint exit mode register */ - u8 res2[0x48]; -} dbg83xx_t; - -/* -* RISC Special Registers (Trap and Breakpoint) -*/ +#if defined(CONFIG_MPC834X) +typedef struct immap { + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + gpio83xx_t gpio[2]; /* General purpose I/O module */ + u8 res0[0x200]; + u8 dll_ddr[0x100]; + u8 dll_lbc[0x100]; + u8 res1[0xE00]; + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res2[0x1300]; + duart83xx_t duart[2]; /* DUART */ + u8 res3[0x900]; + lbus83xx_t lbus; /* Local Bus Controller Registers */ + u8 res4[0x1000]; + spi83xx_t spi; /* Serial Peripheral Interface */ + dma83xx_t dma; /* DMA */ + pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */ + ios83xx_t ios; /* Sequencer */ + pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ + u8 res5[0x19900]; + usb83xx_t usb; + tsec83xx_t tsec[2]; + u8 res6[0xA000]; + security83xx_t security; + u8 res7[0xC0000]; +} immap_t; -typedef struct rsp83xx { - u8 fixme[0x100]; -} rsp83xx_t; -#endif +#elif defined(CONFIG_MPC8360) +typedef struct immap { + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + u8 res0[0x200]; + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + qepi83xx_t qepi; /* QE Ports Interrupts Registers */ + u8 res1[0x300]; + u8 dll_ddr[0x100]; + u8 dll_lbc[0x100]; + u8 res2[0x200]; + qepio83xx_t qepio; /* QE Parallel I/O ports */ + qesba83xx_t qesba; /* QE Secondary Bus Access Windows */ + u8 res3[0x400]; + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res4[0x1300]; + duart83xx_t duart[2]; /* DUART */ + u8 res5[0x900]; + lbus83xx_t lbus; /* Local Bus Controller Registers */ + u8 res6[0x2000]; + dma83xx_t dma; /* DMA */ + pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ + u8 res7[128]; + ios83xx_t ios; /* Sequencer (IOS) */ + pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ + u8 res8[0x4A00]; + ddr83xx_t ddr_secondary; /* Secondary DDR Memory Controller Memory Map */ + u8 res9[0x22000]; + security83xx_t security; + u8 res10[0xC0000]; + u8 qe[0x100000]; /* QE block */ +} immap_t; +#elif defined(CONFIG_MPC832X) typedef struct immap { - sysconf83xx_t sysconf; /* System configuration */ - wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ - rtclk83xx_t rtc; /* Real Time Clock Module Registers */ - rtclk83xx_t pit; /* Periodic Interval Timer */ - gtm83xx_t gtm[2]; /* Global Timers Module */ - ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ - arbiter83xx_t arbiter; /* System Arbiter Registers */ - reset83xx_t reset; /* Reset Module */ - clk83xx_t clk; /* System Clock Module */ - pmc83xx_t pmc; /* Power Management Control Module */ -#if defined (CONFIG_MPC8349) - gpio83xx_t pgio[2]; /* general purpose I/O module */ -#elif defined (CONFIG_MPC8360) - qepi83xx_t qepi; /* QE Ports Interrupts Registers */ -#endif - u8 res0[0x200]; -#if defined (CONFIG_MPC8360) - u8 DLL_LBDDR[0x100]; -#endif - u8 DDL_DDR[0x100]; - u8 DDL_LBIU[0x100]; -#if defined (CONFIG_MPC8349) - u8 res1[0xE00]; -#elif defined (CONFIG_MPC8360) - u8 res1[0x200]; - gpio83xx_t gpio; /* General purpose I/O module */ - qesba83xx_t qesba; /* QE Secondary Bus Access Windows */ -#endif - ddr83xx_t ddr; /* DDR Memory Controller Memory */ - fsl_i2c_t i2c[2]; /* I2C Controllers */ - u8 res2[0x1300]; - duart83xx_t duart[2]; /* DUART */ -#if defined (CONFIG_MPC8349) - u8 res3[0x900]; - lbus83xx_t lbus; /* Local Bus Controller Registers */ - u8 res4[0x1000]; - spi83xx_t spi; /* Serial Peripheral Interface */ - u8 res5[0xF00]; -#elif defined (CONFIG_MPC8360) - u8 res3[0x900]; - lbus83xx_t lbus; /* Local Bus Controller */ - u8 res4[0x2000]; -#endif - dma83xx_t dma; /* DMA */ -#if defined (CONFIG_MPC8349) - pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */ - ios83xx_t ios; /* Sequencer */ - pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ - u8 res6[0x19900]; - usb83xx_t usb; - tsec83xx_t tsec[2]; - u8 res7[0xA000]; - security83xx_t security; -#elif defined (CONFIG_MPC8360) - pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ - u8 res_5[128]; - ios83xx_t ios; /* Sequencer (IOS) */ - pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ - u8 res6[0x4A00]; - ddr83xx_t ddr_secondary; /* Secondary DDR Memory Controller Memory Map */ - u8 res7[0x22000]; - security83xx_t security; - u8 res8[0xC0000]; - iram83xx_t iram; /* IRAM */ - irq83xx_t irq; /* Interrupt Controller */ - cp83xx_t cp; /* Communications Processor */ - qmx83xx_t qmx; /* QE Multiplexer */ - qet83xx_t qet; /* QE Timers */ - spi83xx_t spi[0x2]; /* spi */ - mcc83xx_t mcc; /* mcc */ - brg83xx_t brg; /* brg */ - usb83xx_t usb; /* USB */ - si1_83xx_t si1; /* SI */ - u8 res9[0x800]; - sir83xx_t sir; /* SI Routing Tables */ - ucc83xx_t ucc1; /* ucc1 */ - ucc83xx_t ucc3; /* ucc3 */ - ucc83xx_t ucc5; /* ucc5 */ - ucc83xx_t ucc7; /* ucc7 */ - u8 res10[0x600]; - upc83xx_t upc1; /* MultiPHY UTOPIA POS Controller 1 */ - ucc83xx_t ucc2; /* ucc2 */ - ucc83xx_t ucc4; /* ucc4 */ - ucc83xx_t ucc6; /* ucc6 */ - ucc83xx_t ucc8; /* ucc8 */ - u8 res11[0x600]; - upc83xx_t upc2; /* MultiPHY UTOPIA POS Controller 2 */ - sdma83xx_t sdma; /* SDMA */ - dbg83xx_t dbg; /* Debug Space */ - rsp83xx_t rsp[0x2]; /* RISC Special Registers (Trap and Breakpoint) */ - u8 res12[0x300]; - u8 res13[0x3A00]; - u8 res14[0x8000]; /* 0x108000 - 0x110000 */ - u8 res15[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ - u8 res16[0x24000]; /* 0x11C000 - 0x140000 */ - u8 res17[0xC0000]; /* 0x140000 - 0x200000 */ -#endif + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + qepi83xx_t qepi; /* QE Ports Interrupts Registers */ + u8 res0[0x300]; + u8 dll_ddr[0x100]; + u8 dll_lbc[0x100]; + u8 res1[0x200]; + qepio83xx_t qepio; /* QE Parallel I/O ports */ + u8 res2[0x800]; + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res3[0x1300]; + duart83xx_t duart[2]; /* DUART */ + u8 res4[0x900]; + lbus83xx_t lbus; /* Local Bus Controller Registers */ + u8 res5[0x2000]; + dma83xx_t dma; /* DMA */ + pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ + u8 res6[128]; + ios83xx_t ios; /* Sequencer (IOS) */ + pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ + u8 res7[0x27A00]; + security83xx_t security; + u8 res8[0xC0000]; + u8 qe[0x100000]; /* QE block */ } immap_t; +#endif #endif /* __IMMAP_83xx__ */ diff --git a/include/asm-ppc/immap_86xx.h b/include/asm-ppc/immap_86xx.h index a5552c4..0e3fc34 100644 --- a/include/asm-ppc/immap_86xx.h +++ b/include/asm-ppc/immap_86xx.h @@ -721,6 +721,8 @@ typedef struct ccsr_pic { uint frr; /* 0x41000 - Feature Reporting Register */ char res10[28]; uint gcr; /* 0x41020 - Global Configuration Register */ +#define MPC86xx_PICGCR_RST 0x80000000 +#define MPC86xx_PICGCR_MODE 0x20000000 char res11[92]; uint vir; /* 0x41080 - Vendor Identification Register */ char res12[12]; diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h index f385032..950b949 100644 --- a/include/asm-ppc/immap_qe.h +++ b/include/asm-ppc/immap_qe.h @@ -547,4 +547,10 @@ typedef struct qe_immap { extern qe_map_t *qe_immr; +#if defined(CONFIG_MPC8360) +#define QE_MURAM_SIZE 0xc000UL +#elif defined(CONFIG_MPC832X) +#define QE_MURAM_SIZE 0x4000UL +#endif + #endif /* __IMMAP_QE_H__ */ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index ad9fd49..0585962 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -298,6 +298,10 @@ #define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ #define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */ #define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */ +#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */ +#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */ +#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */ +#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */ #define SPRN_SRR0 0x01A /* Save/Restore Register 0 */ #define SPRN_SRR1 0x01B /* Save/Restore Register 1 */ #define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ @@ -529,6 +533,10 @@ #define SPRG1 SPRN_SPRG1 #define SPRG2 SPRN_SPRG2 #define SPRG3 SPRN_SPRG3 +#define SPRG4 SPRN_SPRG4 +#define SPRG5 SPRN_SPRG5 +#define SPRG6 SPRN_SPRG6 +#define SPRG7 SPRN_SPRG7 #define SRR0 SPRN_SRR0 /* Save and Restore Register 0 */ #define SRR1 SPRN_SRR1 /* Save and Restore Register 1 */ #define SVR SPRN_SVR /* System Version Register */ @@ -731,6 +739,7 @@ #define PVR_405CR_RC 0x40110145 /* same as pc405gp rev e */ #define PVR_405EP_RA 0x51210950 #define PVR_405GPR_RB 0x50910951 +#define PVR_405EZ_RA 0x41511460 #define PVR_440GP_RB 0x40120440 #define PVR_440GP_RC 0x40120481 #define PVR_440EP_RA 0x42221850 diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h index 30b44e3..464f6b5 100644 --- a/include/asm-ppc/u-boot.h +++ b/include/asm-ppc/u-boot.h @@ -83,6 +83,7 @@ typedef struct bd_info { defined(CONFIG_405GP) || \ defined(CONFIG_405CR) || \ defined(CONFIG_405EP) || \ + defined(CONFIG_405EZ) || \ defined(CONFIG_440) unsigned char bi_s_version[4]; /* Version of this structure */ unsigned char bi_r_version[32]; /* Version of the ROM (AMCC) */ @@ -107,7 +108,8 @@ typedef struct bd_info { unsigned char bi_enet3addr[6]; #endif -#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \ +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \ + defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) unsigned int bi_opbfreq; /* OPB clock in Hz */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h new file mode 100644 index 0000000..cecb225 --- /dev/null +++ b/include/configs/MPC832XEMDS.h @@ -0,0 +1,631 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_QE 1 /* Has QE */ +#define CONFIG_MPC83XX 1 /* MPC83xx family */ +#define CONFIG_MPC832X 1 /* MPC832x CPU specific */ +#define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */ + +/* + * System Clock Setup + */ +#ifdef CONFIG_PCISLAVE +#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ +#else +#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ 66000000 +#endif + +/* + * Hardware Reset Configuration Word + */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_VCO_1X2 |\ + HRCWL_CSB_TO_CLKIN_2X1 |\ + HRCWL_CORE_TO_CSB_2X1 |\ + HRCWL_CE_PLL_VCO_DIV_2 |\ + HRCWL_CE_PLL_DIV_1X1 |\ + HRCWL_CE_TO_PLL_1X3) + +#ifdef CONFIG_PCISLAVE +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_AGENT |\ + HRCWH_PCI1_ARBITER_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LALE_NORMAL) +#else +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LALE_NORMAL) +#endif + +/* + * System IO Config + */ +#define CFG_SICRL 0x00000000 + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +/* + * IMMR new address + */ +#define CFG_IMMR 0xE0000000 + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDRCDR 0x73000002 /* DDR II voltage is 1.8V */ + +#undef CONFIG_SPD_EEPROM +#if defined(CONFIG_SPD_EEPROM) +/* Determine DDR configuration from I2C interface + */ +#define SPD_EEPROM_ADDRESS 0x51 /* DDR SODIMM */ +#else +/* Manually set up DDR parameters + */ +#define CFG_DDR_SIZE 128 /* MB */ +#define CFG_DDR_CS0_CONFIG 0x80840102 +#define CFG_DDR_TIMING_0 0x00220802 +#define CFG_DDR_TIMING_1 0x3935d322 +#define CFG_DDR_TIMING_2 0x0f9048ca +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_CLK_CNTL 0x02000000 +#define CFG_DDR_MODE 0x44400232 +#define CFG_DDR_MODE2 0x8000c000 +#define CFG_DDR_INTERVAL 0x03200064 +#define CFG_DDR_CS0_BNDS 0x00000007 +#define CFG_DDR_SDRAM_CFG 0x43080000 +#define CFG_DDR_SDRAM_CFG2 0x00401000 +#endif + +/* + * Memory test + */ +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00000000 /* memtest region */ +#define CFG_MEMTEST_END 0x00100000 + +/* + * The reserved memory + */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) +#define CFG_LBC_LBCR 0x00000000 + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */ + +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM + +/* + * BCSR on the Local Bus + */ +#define CFG_BCSR 0xF8000000 +#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ + +#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */ +#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ + +/* + * SDRAM on the Local Bus + */ +#undef CFG_LB_SDRAM /* The board has not SRDAM on local bus */ + +#ifdef CFG_LB_SDRAM +#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ + +/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 + * + * CFG_LBC_SDRAM_BASE should be masked and OR'ed into + * the top 17 bits of BR2. + */ + +#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */ + +/* + * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. + * + * For OR2, need: + * 64MB mask for AM, OR2[0:7] = 1111 1100 + * XAM, OR2[17:18] = 11 + * 9 columns OR2[19-21] = 010 + * 13 rows OR2[23-25] = 100 + * EAD set for extra time OR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 + */ + +#define CFG_OR2_PRELIM 0xfc006901 + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON 0x0063b723 + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) + +#endif + +/* + * Windows to access PIB via local bus + */ +#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */ +#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ + +/* + * CS2 on Local Bus, to PIB + */ +#define CFG_BR2_PRELIM 0xf8008801 /* CS2 base address at 0xf8008000 */ +#define CFG_OR2_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ + +/* + * CS3 on Local Bus, to PIB + */ +#define CFG_BR3_PRELIM 0xf8010801 /* CS3 base address at 0xf8010000 */ +#define CFG_OR3_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8323@0" +#define OF_SOC "soc8323@e0000000" +#define OF_QE "qe@e0100000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500" + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 + +/* + * Config on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI_MEM_BASE 0x80000000 +#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE +#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI_MMIO_BASE 0x90000000 +#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE +#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI_IO_BASE 0xE0300000 +#define CFG_PCI_IO_PHYS 0xE0300000 +#define CFG_PCI_IO_SIZE 0x100000 /* 1M */ + +#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE +#define CFG_PCI_SLV_MEM_BUS 0x00000000 +#define CFG_PCI_SLV_MEM_SIZE 0x80000000 + + +#ifdef CONFIG_PCI + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + +#endif /* CONFIG_PCI */ + + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#define CONFIG_ETHPRIME "Freescale GETH" + +#define CONFIG_UEC_ETH1 /* ETH3 */ + +#ifdef CONFIG_UEC_ETH1 +#define CFG_UEC1_UCC_NUM 2 /* UCC3 */ +#define CFG_UEC1_RX_CLK QE_CLK9 +#define CFG_UEC1_TX_CLK QE_CLK10 +#define CFG_UEC1_ETH_TYPE FAST_ETH +#define CFG_UEC1_PHY_ADDR 3 +#define CFG_UEC1_INTERFACE_MODE ENET_100_MII +#endif + +#define CONFIG_UEC_ETH2 /* ETH4 */ + +#ifdef CONFIG_UEC_ETH2 +#define CFG_UEC2_UCC_NUM 3 /* UCC4 */ +#define CFG_UEC2_RX_CLK QE_CLK7 +#define CFG_UEC2_TX_CLK QE_CLK8 +#define CFG_UEC2_ETH_TYPE FAST_ETH +#define CFG_UEC2_PHY_ADDR 4 +#define CFG_UEC2_INTERFACE_MODE ENET_100_MII +#endif + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_PCI \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#else +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#endif +#else +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PCI \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C) +#else +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C ) +#endif +#endif + +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Cache Config + */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ +#endif + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +/* IMMRBAR & PCI IO: cache-inhibit and guarded */ +#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* BCSR: cache-inhibit and guarded */ +#define CFG_IBAT2L (CFG_BCSR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CFG_IBAT3L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT3U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_DBAT3L (CFG_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U CFG_IBAT3U + +#define CFG_IBAT4L (0) +#define CFG_IBAT4U (0) +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10) +#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U + +#ifdef CONFIG_PCI +/* PCI MEM space: cacheable */ +#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +/* PCI MMIO space: cache-inhibit and guarded */ +#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#else +#define CFG_IBAT6L (0) +#define CFG_IBAT6U (0) +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_UEC_ETH) +#define CONFIG_ETHADDR 00:04:9f:ef:03:01 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02 +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=ramfs.83xx\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc832xemds.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + + +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 5bed2d0..0460be9 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -60,17 +60,6 @@ #endif #endif -#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK)) -#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */ -#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */ -#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */ -#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */ -#define CFG_SCCR_VAL ( CFG_SCCR_INIT \ - | CFG_SCCR_TSEC1CM \ - | CFG_SCCR_TSEC2CM \ - | CFG_SCCR_ENCCM \ - | CFG_SCCR_USBCM ) - #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ #define CFG_IMMR 0xE0000000 @@ -82,7 +71,7 @@ /* * DDR Setup */ -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_ECC /* support DDR ECC function */ #define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ @@ -101,8 +90,15 @@ #define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ #define CFG_SDRAM_BASE CFG_DDR_BASE #define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) #undef CONFIG_DDR_2T_TIMING +/* + * DDRCDR - DDR Control Driver Register + */ +#define CFG_DDRCDR_VALUE 0x80080001 + #if defined(CONFIG_SPD_EEPROM) /* * Determine DDR configuration from I2C interface. @@ -113,6 +109,21 @@ * Manually set up DDR parameters */ #define CFG_DDR_SIZE 256 /* MB */ +#if defined(CONFIG_DDR_II) +#define CFG_DDRCDR 0x80080001 +#define CFG_DDR_CS2_BNDS 0x0000000f +#define CFG_DDR_CS2_CONFIG 0x80330102 +#define CFG_DDR_TIMING_0 0x00220802 +#define CFG_DDR_TIMING_1 0x38357322 +#define CFG_DDR_TIMING_2 0x2f9048c8 +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_CLK_CNTL 0x02000000 +#define CFG_DDR_MODE 0x47d00432 +#define CFG_DDR_MODE2 0x8000c000 +#define CFG_DDR_INTERVAL 0x03cf0080 +#define CFG_DDR_SDRAM_CFG 0x43000000 +#define CFG_DDR_SDRAM_CFG2 0x00401000 +#else #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) #define CFG_DDR_TIMING_1 0x36332321 #define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ @@ -127,6 +138,7 @@ #define CFG_DDR_MODE 0x00000022 /* DLL,normal,seq,4/2.5, 4 burst len */ #endif #endif +#endif /* * SDRAM on the Local Bus @@ -140,19 +152,20 @@ #define CFG_FLASH_CFI /* use the Common Flash Interface */ #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ -#define CFG_FLASH_SIZE 8 /* flash size in MB */ +#define CFG_FLASH_SIZE 32 /* max flash size in MB */ /* #define CFG_FLASH_USE_BUFFER_WRITE */ #define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \ - (2 << BR_PS_SHIFT) | /* 32 bit port size */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ BR_V) /* valid */ - -#define CFG_OR0_PRELIM 0xFF806FF7 /* 8 MB flash size */ +#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ + OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) #define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */ -#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */ +#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32 MB window size */ #define CFG_MAX_FLASH_BANKS 1 /* number of banks */ -#define CFG_MAX_FLASH_SECT 64 /* sectors per device */ +#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ @@ -197,7 +210,11 @@ #define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) #define CFG_LBC_LBCR 0x00000000 -#define CFG_LB_SDRAM /* if board has SRDAM on local bus */ +/* + * The MPC834xEA MDS for 834xE rev3.1 may not be assembled SDRAM memory. + * if board has SRDAM on local bus, you can define CFG_LB_SDRAM + */ +#undef CFG_LB_SDRAM #ifdef CFG_LB_SDRAM /* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */ @@ -314,6 +331,7 @@ #define CFG_NS16550_COM1 (CFG_IMMR+0x4500) #define CFG_NS16550_COM2 (CFG_IMMR+0x4600) +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ /* Use the HUSH parser */ #define CFG_HUSH_PARSER #ifdef CFG_HUSH_PARSER diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index cbdbb29..37bbfb3 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -21,7 +21,7 @@ */ /* - MPC8349E-mITX board configuration file + MPC8349E-mITX and MPC8349E-mITX-GP board configuration file Memory map: @@ -31,11 +31,11 @@ 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) - 0xF000_0000-0xF000_FFFF Compact Flash + 0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only) 0xF001_0000-0xF001_FFFF Local bus expansion slot - 0xF800_0000-0xF801_FFFF GBE L2 Switch VSC7385 - 0xFF00_0000-0xFF7F_FFFF Alternative bank of Flash memory (8MB) - 0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB) + 0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only) + 0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory + 0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only) I2C address list: Align. Board @@ -56,7 +56,9 @@ #ifndef __CONFIG_H #define __CONFIG_H -#undef DEBUG +#if (TEXT_BASE == 0xFE000000) +#define CFG_LOWBOOT +#endif /* * High Level Configuration Options @@ -64,14 +66,26 @@ #define CONFIG_MPC834X /* MPC834x family (8343, 8347, 8349) */ #define CONFIG_MPC8349 /* MPC8349 specific */ -#define CONFIG_PCI +#define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */ + + +/* On-board devices */ +#ifdef CONFIG_MPC8349ITX #define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ -#define CONFIG_RTC_DS1337 +#define CONFIG_VSC7385 /* The Vitesse 7385 5-port switch */ +#endif -/* I2C */ +#define CONFIG_PCI +#define CONFIG_RTC_DS1337 #define CONFIG_HARD_I2C +#define CONFIG_TSEC_ENET /* TSEC Ethernet support */ +/* + * Device configurations + */ + +/* I2C */ #ifdef CONFIG_HARD_I2C #define CONFIG_MISC_INIT_F @@ -111,59 +125,40 @@ #endif -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE +/* Compact Flash */ +#ifdef CONFIG_COMPACT_FLASH -#define PCI_66M -#ifdef PCI_66M -#define CONFIG_83XX_CLKIN 66666666 /* in Hz */ -#else -#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ -#endif +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 1 -#ifndef CONFIG_SYS_CLK_FREQ -#ifdef PCI_66M -#define CONFIG_SYS_CLK_FREQ 66666666 -#else -#define CONFIG_SYS_CLK_FREQ 33333333 -#endif -#endif +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CFG_ATA_BASE_ADDR CFG_CF_BASE +#define CFG_ATA_DATA_OFFSET 0x0000 +#define CFG_ATA_REG_OFFSET 0 +#define CFG_ATA_ALT_OFFSET 0x0200 +#define CFG_ATA_STRIDE 2 -#define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */ +#define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */ -#undef CFG_DRAM_TEST /* memory test, takes time */ -#define CFG_MEMTEST_START 0x00003000 /* memtest region */ -#define CFG_MEMTEST_END 0x07100000 /* only has 128M */ +#define CONFIG_DOS_PARTITION -/* - * DDR Setup - */ -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ -#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ +#endif /* - * 32-bit data path mode. - * - * Please note that using this mode for devices with the real density of 64-bit - * effectively reduces the amount of available memory due to the effect of - * wrapping around while translating address to row/columns, for example in the - * 256MB module the upper 128MB get aliased with contents of the lower - * 128MB); normally this define should be used for devices with real 32-bit - * data path. + * DDR Setup */ -#undef CONFIG_DDR_32BIT - -#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CFG_SDRAM_BASE CFG_DDR_BASE -#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE -#undef CONFIG_DDR_2T_TIMING +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE #define CFG_83XX_DDR_USES_CS0 +#define CFG_MEMTEST_START 0x1000 /* memtest region */ +#define CFG_MEMTEST_END 0x2000 -#ifndef CONFIG_SPD_EEPROM -/* - * Manually set up DDR parameters - */ +#ifdef CONFIG_HARD_I2C +#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ +#endif + +#ifndef CONFIG_SPD_EEPROM /* No SPD? Then manually set up DDR parameters */ #define CFG_DDR_SIZE 256 /* Mb */ #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) @@ -171,46 +166,65 @@ #define CFG_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ #endif -/* FLASH on the Local Bus */ +/* + *Flash on the Local Bus + */ + #define CFG_FLASH_CFI /* use the Common Flash Interface */ #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ -#define CFG_FLASH_SIZE 16 /* FLASH size in MB */ #define CFG_FLASH_EMPTY_INFO +#define CFG_MAX_FLASH_SECT 135 /* 127 64KB sectors + 8 8KB sectors per device */ +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +/* The ITX has two flash chips, but the ITX-GP has only one. To support both +boards, we say we have two, but don't display a message if we find only one. */ +#define CFG_FLASH_QUIET_TEST +#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000} +#define CFG_FLASH_SIZE 16 /* FLASH size in MB */ +#define CFG_FLASH_SIZE_SHIFT 4 /* log2 of the above value */ + +/* + * BRx, ORx, LBLAWBARx, and LBLAWARx + */ + +/* Flash */ #define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V) #define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) -#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ -#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16Mb window bytes */ +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE +#define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT)) -/* VSC7385 on the Local Bus */ -#define CFG_VSC7385_BASE 0xF8000000 /* start of VSC7385 */ +/* Vitesse 7385 */ -#define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V) -#define CFG_OR1_PRELIM (0xFFFE0000 /* 128KB */ | \ - OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ - OR_GPCM_SETA | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) +#ifdef CONFIG_VSC7385 -#define CFG_LBLAWBAR1_PRELIM CFG_VSC7385_BASE /* Access window base at VSC7385 base */ -#define CFG_LBLAWAR1_PRELIM 0x80000010 /* Access window size 128K */ +#define CFG_VSC7385_BASE 0xF8000000 -#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ -#define CFG_MAX_FLASH_SECT 135 /* sectors per device */ +#define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V) +#define CFG_OR1_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ + OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \ + OR_GPCM_EHTR | OR_GPCM_EAD) -#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000} +#define CFG_LBLAWBAR1_PRELIM CFG_VSC7385_BASE +#define CFG_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) -#undef CFG_FLASH_CHECKSUM -#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#endif -#define CFG_LED_BASE 0xF9000000 /* start of LED and Board ID */ +/* LED */ + +#define CFG_LED_BASE 0xF9000000 #define CFG_BR2_PRELIM (CFG_LED_BASE | BR_PS_8 | BR_V) -#define CFG_OR2_PRELIM (0xFFE00000 /* 2MB */ | \ - OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | \ - OR_GPCM_SCY_9 | \ - OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) +#define CFG_OR2_PRELIM (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | \ + OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_TRLX | \ + OR_GPCM_EHTR | OR_GPCM_EAD) + +/* Compact Flash */ #ifdef CONFIG_COMPACT_FLASH @@ -219,32 +233,16 @@ #define CFG_BR3_PRELIM (CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V) #define CFG_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) -#define CFG_LBLAWBAR2_PRELIM CFG_CF_BASE /* Window base at flash base + LED & Board ID */ -#define CFG_LBLAWAR2_PRELIM 0x8000000F /* 64K bytes */ - -#undef CONFIG_IDE_RESET -#undef CONFIG_IDE_PREINIT - -#define CFG_IDE_MAXBUS 1 -#define CFG_IDE_MAXDEVICE 1 - -#define CFG_ATA_IDE0_OFFSET 0x0000 -#define CFG_ATA_BASE_ADDR CFG_CF_BASE -#define CFG_ATA_DATA_OFFSET 0x0000 -#define CFG_ATA_REG_OFFSET 0 -#define CFG_ATA_ALT_OFFSET 0x0200 -#define CFG_ATA_STRIDE 2 - -#define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */ +#define CFG_LBLAWBAR3_PRELIM CFG_CF_BASE +#define CFG_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) #endif -#define CONFIG_DOS_PARTITION - -#define CFG_MID_FLASH_JUMP 0x7F000000 +/* + * U-Boot memory configuration + */ #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ - #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) #define CFG_RAMBOOT #else @@ -253,10 +251,10 @@ #define CONFIG_L1_INIT_RAM #define CFG_INIT_RAM_LOCK -#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ -#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -272,98 +270,10 @@ #define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) #define CFG_LBC_LBCR 0x00000000 -#undef CFG_LB_SDRAM /* if board has SRDAM on local bus */ - -#ifdef CFG_LB_SDRAM -/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/ -/* - * Base Register 2 and Option Register 2 configure SDRAM. - * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. - * - * For BR2, need: - * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 - * port-size = 32-bits = BR2[19:20] = 11 - * no parity checking = BR2[21:22] = 00 - * SDRAM for MSEL = BR2[24:26] = 011 - * Valid = BR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 - */ - -#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ -#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -#define CFG_LBLAWBAR2_PRELIM 0xF0000000 -#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64M */ - -#define CFG_BR2_PRELIM (CFG_LBC_SDRAM_BASE | BR_PS_32 | BR_MS_SDRAM | BR_V) -#define CFG_OR2_PRELIM (0xFC000000 /* 64 MB */ | \ - OR_SDRAM_XAM | \ - ((9 - 7) << OR_SDRAM_COLS_SHIFT) | \ - ((13 - 9) << OR_SDRAM_ROWS_SHIFT) | \ - OR_SDRAM_EAD) - #define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ #define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/ /* - * LSDMR masks - */ -#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1)) -#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10)) -#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10)) -#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16)) -#define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16)) -#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16)) -#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19)) -#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19)) -#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) -#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22)) -#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) -#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) -#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23)) -#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27)) -#define CFG_LBC_LSDMR_WRC3 (3 << (31 - 27)) -#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27)) -#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29)) -#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31)) - -#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) -#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) - -#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \ - | CFG_LBC_LSDMR_BSMA1516 \ - | CFG_LBC_LSDMR_RFCR8 \ - | CFG_LBC_LSDMR_PRETOACT6 \ - | CFG_LBC_LSDMR_ACTTORW3 \ - | CFG_LBC_LSDMR_BL8 \ - | CFG_LBC_LSDMR_WRC3 \ - | CFG_LBC_LSDMR_CL3 \ - ) - -/* - * SDRAM Controller configuration sequence. - */ -#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ - | CFG_LBC_LSDMR_OP_PCHALL) -#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ - | CFG_LBC_LSDMR_OP_ARFRSH) -#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ - | CFG_LBC_LSDMR_OP_ARFRSH) -#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ - | CFG_LBC_LSDMR_OP_MRW) -#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ - | CFG_LBC_LSDMR_OP_NORMAL) -#endif - -/* * Serial Port */ #define CONFIG_CONS_INDEX 1 @@ -374,20 +284,16 @@ #define CFG_NS16550_CLK get_bus_freq(0) #define CFG_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CONFIG_BAUDRATE 115200 #define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) #define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) -/* Use the HUSH parser */ -#define CFG_HUSH_PARSER -#ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " -#endif - /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_FLAT_TREE +#define CONFIG_OF_BOARD_SETUP /* maximum size of the flat tree (8K) */ #define OF_FLAT_TREE_MAX_SIZE 8192 @@ -397,6 +303,9 @@ #define OF_TBCLK (bd->bi_busfreq / 4) #define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" +/* + * PCI + */ #ifdef CONFIG_PCI #define CONFIG_MPC83XX_PCI2 @@ -447,14 +356,18 @@ #endif +#define PCI_66M +#ifdef PCI_66M +#define CONFIG_83XX_CLKIN 66666666 /* in Hz */ +#else +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ +#endif + /* TSEC */ #ifdef CONFIG_TSEC_ENET -#ifndef CONFIG_NET_MULTI #define CONFIG_NET_MULTI -#endif - #define CONFIG_MII #define CONFIG_PHY_GIGE /* In case CFG_CMD_MII is specified */ @@ -468,6 +381,7 @@ #endif #ifdef CONFIG_MPC83XX_TSEC2 +#define CONFIG_HAS_ETH1 #define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" #define CFG_TSEC2_OFFSET 0x25000 #define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ @@ -479,14 +393,15 @@ #endif - /* * Environment */ +#define CONFIG_ENV_OVERWRITE + #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH - #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + (4 * CFG_ENV_SECT_SIZE)) #define CFG_ENV_SIZE 0x2000 #else #define CFG_NO_FLASH /* Flash is not usable now */ @@ -533,16 +448,23 @@ /* Watchdog */ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#ifdef CONFIG_WATCHDOG -#define CFG_WATCHDOG_VALUE 0xFFFFFFC3 -#endif /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CFG_HUSH_PARSER /* Use the HUSH parser */ +#define CFG_PROMPT_HUSH_PS2 "> " + #define CFG_LOAD_ADDR 0x2000000 /* default load address */ -#define CFG_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#ifdef CONFIG_MPC8349ITX +#define CFG_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "MPC8349E-mITX-GP> " /* Monitor Command Prompt */ +#endif #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -562,15 +484,15 @@ */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ -/* Cache Configuration */ +/* + * Cache Configuration + */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log2 of the above value */ #endif -#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ - #define CFG_HRCW_LOW (\ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ HRCWL_DDR_TO_SCB_CLK_1X1 |\ @@ -578,12 +500,12 @@ HRCWL_VCO_1X2 |\ HRCWL_CORE_TO_CSB_2X1) -#ifdef PCI_64BIT +#ifdef CFG_LOWBOOT #define CFG_HRCW_HIGH (\ HRCWH_PCI_HOST |\ - HRCWH_64_BIT_PCI |\ + HRCWH_32_BIT_PCI |\ HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_DISABLE |\ + HRCWH_PCI2_ARBITER_ENABLE |\ HRCWH_CORE_ENABLE |\ HRCWH_FROM_0X00000100 |\ HRCWH_BOOTSEQ_DISABLE |\ @@ -596,7 +518,7 @@ HRCWH_PCI_HOST |\ HRCWH_32_BIT_PCI |\ HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_DISABLE |\ + HRCWH_PCI2_ARBITER_ENABLE |\ HRCWH_CORE_ENABLE |\ HRCWH_FROM_0XFFF00100 |\ HRCWH_BOOTSEQ_DISABLE |\ @@ -606,30 +528,32 @@ HRCWH_TSEC2M_IN_GMII ) #endif -/* System performance */ +/* + * System performance + */ #define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ #define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ #define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ #define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ #define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ #define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ -#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count */ -/* System IO Config */ +/* + * System IO Config + */ #define CFG_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ #define CFG_SICRL (SICRL_LDP_A | SICRL_USB1) -#define CFG_HID0_INIT 0x000000000 - -#define CFG_HID0_FINAL CFG_HID0_INIT +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL CFG_HID0_INIT #define CFG_HID2 HID2_HBE -/* DDR @ 0x00000000 */ +/* DDR */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -/* PCI @ 0x80000000 */ +/* PCI */ #ifdef CONFIG_PCI #define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) @@ -706,97 +630,72 @@ #endif #ifdef CONFIG_MPC83XX_TSEC2 -#define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 #endif -#if 1 -#define CONFIG_IPADDR 10.82.19.159 -#define CONFIG_SERVERIP 10.82.48.106 -#define CONFIG_GATEWAYIP 10.82.19.254 -#define CONFIG_NETMASK 255.255.252.0 -#define CONFIG_NETDEV eth0 - -#define CONFIG_HOSTNAME mpc8349emitx -#define CONFIG_ROOTPATH /nfsroot0/u/timur/itx-ltib/rootfs -#define CONFIG_BOOTFILE timur/uImage - -#define CONFIG_UBOOTPATH timur/u-boot.bin -#else #define CONFIG_IPADDR 192.168.1.253 #define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 #define CONFIG_NETMASK 255.255.252.0 #define CONFIG_NETDEV eth0 +#ifdef CONFIG_MPC8349ITX #define CONFIG_HOSTNAME mpc8349emitx -#define CONFIG_ROOTPATH /nfsroot/rootfs -#define CONFIG_BOOTFILE uImage - -#define CONFIG_UBOOTPATH u-boot.bin +#else +#define CONFIG_HOSTNAME mpc8349emitxgp #endif -#define CONFIG_UBOOTSTART fe700000 -#define CONFIG_UBOOTEND fe77ffff - -#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ - -#define CONFIG_BAUDRATE 115200 +/* Default path and filenames */ +#define CONFIG_ROOTPATH /nfsroot/rootfs +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ -#undef CONFIG_BOOTCOMMAND -#ifdef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTDELAY 6 +#ifdef CONFIG_MPC8349ITX +#define CONFIG_FDTFILE mpc8349emitx.dtb #else -#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#define CONFIG_FDTFILE mpc8349emitxgp.dtb #endif +#define CONFIG_BOOTDELAY 0 + #define XMK_STR(x) #x #define MK_STR(x) XMK_STR(x) #define CONFIG_BOOTARGS \ "root=/dev/nfs rw" \ " nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \ - " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \ + " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \ MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \ MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \ " console=ttyS0," MK_STR(CONFIG_BAUDRATE) #define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ - "tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \ - "erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ - "cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \ - "cmp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize\0" \ - "tftpupdate=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \ - "protect off FEF00000 FEF7FFFF; " \ - "erase FEF00000 FEF7FFFF; " \ - "cp.b $loadaddr FEF00000 $filesize; " \ - "protect on FEF00000 FEF7FFFF; " \ - "cmp.b $loadaddr FEF00000 $filesize\0" \ - "tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \ - "copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \ - "cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0" \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ "fdtaddr=400000\0" \ - "fdtfile=mpc8349emitx.dtb\0" \ - "" + "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" #define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" + "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \ + " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + " console=$console,$baudrate $othbootargs; " \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - + "setenv bootargs root=/dev/ram rw" \ + " console=$console,$baudrate $othbootargs; " \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #undef MK_STR #undef XMK_STR diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 8ad6551..79937dc 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -100,12 +100,19 @@ #define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ #define CFG_SDRAM_BASE CFG_DDR_BASE #define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) #define CFG_83XX_DDR_USES_CS0 -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_ECC /* support DDR ECC function */ #define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ +/* + * DDRCDR - DDR Control Driver Register + */ +#define CFG_DDRCDR_VALUE 0x80080001 + #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #if defined(CONFIG_SPD_EEPROM) /* @@ -117,6 +124,21 @@ * Manually set up DDR parameters */ #define CFG_DDR_SIZE 256 /* MB */ +#if defined(CONFIG_DDR_II) +#define CFG_DDRCDR 0x80080001 +#define CFG_DDR_CS0_BNDS 0x0000000f +#define CFG_DDR_CS0_CONFIG 0x80330102 +#define CFG_DDR_TIMING_0 0x00220802 +#define CFG_DDR_TIMING_1 0x38357322 +#define CFG_DDR_TIMING_2 0x2f9048c8 +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_CLK_CNTL 0x02000000 +#define CFG_DDR_MODE 0x47d00432 +#define CFG_DDR_MODE2 0x8000c000 +#define CFG_DDR_INTERVAL 0x03cf0080 +#define CFG_DDR_SDRAM_CFG 0x43000000 +#define CFG_DDR_SDRAM_CFG2 0x00401000 +#else #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9) #define CFG_DDR_TIMING_1 0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */ #define CFG_DDR_TIMING_2 0x00000800 /* may need tuning */ @@ -124,6 +146,7 @@ #define CFG_DDR_MODE 0x20000162 /* DLL,normal,seq,4/2.5 */ #define CFG_DDR_INTERVAL 0x045b0100 /* page mode */ #endif +#endif /* * Memory test @@ -168,7 +191,7 @@ #define CFG_FLASH_CFI /* use the Common Flash Interface */ #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ -#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */ +#define CFG_FLASH_SIZE 32 /* max FLASH size is 32M */ #define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ #define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ @@ -176,10 +199,12 @@ #define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ BR_V) /* valid */ -#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ +#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ + OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) #define CFG_MAX_FLASH_BANKS 1 /* number of banks */ -#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ +#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */ #undef CFG_FLASH_CHECKSUM @@ -188,7 +213,7 @@ */ #define CFG_BCSR 0xF8000000 #define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ -#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ +#define CFG_LBLAWAR1_PRELIM 0x8000000F /* Access window size 64K */ #define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */ #define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ @@ -278,8 +303,8 @@ /* * Windows to access PIB via local bus */ -#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */ -#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ +#define CFG_LBLAWBAR3_PRELIM 0xf8010000 /* windows base 0xf8010000 */ +#define CFG_LBLAWAR3_PRELIM 0x8000000e /* windows size 32KB */ /* * CS4 on Local Bus, to PIB @@ -309,6 +334,7 @@ #define CFG_NS16550_COM1 (CFG_IMMR+0x4500) #define CFG_NS16550_COM2 (CFG_IMMR+0x4600) +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ /* Use the HUSH parser */ #define CFG_HUSH_PARSER #ifdef CFG_HUSH_PARSER @@ -316,14 +342,19 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 +#undef CONFIG_OF_FLAT_TREE #define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_HAS_BD_T 1 +#define CONFIG_OF_HAS_UBOOT_ENV 1 + /* maximum size of the flat tree (8K) */ #define OF_FLAT_TREE_MAX_SIZE 8192 #define OF_CPU "PowerPC,8360@0" #define OF_SOC "soc8360@e0000000" +#define OF_QE "qe@e0100000" #define OF_TBCLK (bd->bi_busfreq / 4) #define OF_STDOUT_PATH "/soc8360@e0000000/serial@4500" @@ -609,7 +640,7 @@ "ramdiskaddr=1000000\0" \ "ramdiskfile=ramfs.83xx\0" \ "fdtaddr=400000\0" \ - "fdtfile=mpc8349emds.dtb\0" \ + "fdtfile=mpc8360emds.dtb\0" \ "" #define CONFIG_NFSBOOTCOMMAND \ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 246ac7f..bbe3505 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -212,7 +212,6 @@ #endif #if defined(CFG_RAMBOOT) -#undef CFG_FLASH_CFI_DRIVER #undef CONFIG_SPD_EEPROM #define CFG_SDRAM_SIZE 256 #endif @@ -468,7 +467,6 @@ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 #else - #define CFG_NO_FLASH 1 /* Flash is not usable now */ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) #define CFG_ENV_SIZE 0x2000 @@ -486,21 +484,13 @@ | CFG_CMD_SCSI \ | CFG_CMD_EXT2) \ & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_IMLS \ - | CFG_CMD_FLASH \ - | CFG_CMD_LOADS)) + ~(CFG_CMD_ENV)) #else #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_SCSI \ - | CGF_CMD_EXT2) \ + | CFG_CMD_I2C) \ & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_IMLS \ - | CFG_CMD_FLASH \ - | CFG_CMD_LOADS)) + ~(CFG_CMD_ENV)) #endif #else #if defined(CONFIG_PCI) diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 9d5c4f4..027dd22 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -1,6 +1,9 @@ /* + * (C) Copyright 2007 + * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com + * * (C) Copyright 2001-2004 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this * project. @@ -32,8 +35,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_IDENT_STRING " $Name: esd_PCI405_05_07_28 $" - #define CONFIG_405GP 1 /* This is a PPC405 CPU */ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_PCI405 1 /* ...on a PCI405 board */ @@ -53,9 +54,9 @@ "mem_linux=14336k\0" \ "optargs=panic=0\0" \ "ramargs=setenv bootargs mem=$mem_linux root=/dev/ram rw\0" \ - "addcon=setenv bootargs $bootargs console=ttyS0,$baudrate $optargs\0" \ + "addcons=setenv bootargs $bootargs console=ttyS0,$baudrate $optargs\0" \ "" -#define CONFIG_BOOTCOMMAND "run ramargs;run addcon;loadpci" +#define CONFIG_BOOTCOMMAND "run ramargs;run addcons;loadpci" #define CONFIG_PREBOOT /* enable preboot variable */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index dd5d831..d02c39b 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -51,17 +51,13 @@ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if 0 /* test-only */ #define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_PHY1_ADDR 1 /* PHY address */ -#else -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ -#endif #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 728083b..ed03577 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -57,17 +57,6 @@ */ #define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) -#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK)) -#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */ -#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */ -#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */ -#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */ -#define CFG_SCCR_VAL ( CFG_SCCR_INIT \ - | CFG_SCCR_TSEC1CM \ - | CFG_SCCR_TSEC2CM \ - | CFG_SCCR_ENCCM \ - | CFG_SCCR_USBCM ) - /* board pre init: do not call, nothing to do */ #undef CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/acadia.h b/include/configs/acadia.h new file mode 100644 index 0000000..9e02ca3 --- /dev/null +++ b/include/configs/acadia.h @@ -0,0 +1,424 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * acadia.h - configuration for AMCC Acadia (405EZ) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_ACADIA 1 /* Board is Acadia */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405EZ 1 /* Specifc 405EZ support*/ +#undef CFG_DRAM_TEST /* Disable-takes long time */ +#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ + +#define CONFIG_NO_SERIAL_EEPROM +/*#undef CONFIG_NO_SERIAL_EEPROM*/ + +#ifdef CONFIG_NO_SERIAL_EEPROM + +/*---------------------------------------------------------------------------- + * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI, + * assuming a 66MHz input clock to the 405EZ. + *---------------------------------------------------------------------------*/ +/* #define PLLMR0_100_100_12 */ +#define PLLMR0_200_133_66 +/* #define PLLMR0_266_160_80 */ +/* #define PLLMR0_333_166_83 */ +#endif + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFE000000 +#define CFG_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (384 * 1024)/* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_USB_HOST 0xef603000 /* USB OHCI 1.1 controller */ + +/* + * Define here the location of the environment variables (FLASH). + * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only + * supported for backward compatibility. + */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) + #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#else + #define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#endif + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=acadia\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "bootfile=acadia/uImage\0" \ + "kernel_addr=fff10000\0" \ + "ramdisk_addr=fff20000\0" \ + "initrd_high=30000000\0" \ + "load=tftp 200000 acadia/u-boot.bin\0" \ + "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ + "cp.b ${fileaddr} fffc0000 ${filesize};" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "kozio=bootm ffc60000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0 /* PHY address */ +#define CONFIG_NET_MULTI 1 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ + +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +#if 0 /* test-only */ +#define TEST_ONLY_NAND +#endif + +#ifdef TEST_ONLY_NAND +#define CMD_NAND CFG_CMD_NAND +#else +#define CMD_NAND 0 +#endif + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +#define CONFIG_SUPPORT_VFAT + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_DTT | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CMD_NAND | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CFG_CMD_USB) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CFG_BASE_BAUD 691200 +#define CONFIG_BAUDRATE 115200 + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_AD7414 1 /* use AD7414 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 + +#if 0 /* test-only... */ +/*----------------------------------------------------------------------- + * SPI stuff - Define to include SPI control + *----------------------------------------------------------------------- + */ +#define CONFIG_SPI +#endif + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ + +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +#ifdef TEST_ONLY_NAND +/*----------------------------------------------------------------------- + * NAND FLASH + *----------------------------------------------------------------------*/ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CFG_NAND_BASE (CFG_NAND + CFG_NAND_CS) +#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 /* For AMCC 405EZ CPU */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ +#endif + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ +#define CFG_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */ +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SRAM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ +#define CFG_NAND 0xd0000000 +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ + +/* Memory Bank 0 (Flash) initialization */ +#define CFG_EBC_PB0AP 0x03337200 +#define CFG_EBC_PB0CR 0xfe0bc000 /* BAS=0xFE0,BS=32MB,BU=R/W,BW=32bit */ + +/* Memory Bank 1 (CRAM) initialization */ +#define CFG_EBC_PB1AP 0x030400c0 +#define CFG_EBC_PB1CR 0x000bc000 + +/* Memory Bank 2 (CRAM) initialization */ +#define CFG_EBC_PB2AP 0x030400c0 +#define CFG_EBC_PB2CR 0x020bc000 + +/* Memory Bank 3 (NAND-FLASH) initialization */ +#define CFG_EBC_PB3AP 0x018003c0 +#define CFG_EBC_PB3CR (CFG_NAND | 0x1c000) + +/* Memory Bank 4 (CPLD) initialization */ +#define CFG_EBC_PB4AP 0x04006000 +#define CFG_EBC_PB4CR 0x80018000 /* BAS=0x000,BS=16MB,BU=R/W,BW=32bit */ + +#define CFG_EBC_CFG 0xf8400000 + +/*----------------------------------------------------------------------- + * Definitions for GPIO_0 setup (PPC405EZ specific) + * + * GPIO0[0-3] - External Bus Controller CS_4 - CS_7 Outputs + * GPIO0[4] - External Bus Controller Hold Input + * GPIO0[5] - External Bus Controller Priority Input + * GPIO0[6] - External Bus Controller HLDA Output + * GPIO0[7] - External Bus Controller Bus Request Output + * GPIO0[8] - CRAM Clk Output + * GPIO0[9] - External Bus Controller Ready Input + * GPIO0[10] - CRAM Adv Output + * GPIO0[11-24] - NAND Flash Control Data -> Bypasses GPIO when enabled + * GPIO0[25] - External DMA Request Input + * GPIO0[26] - External DMA EOT I/O + * GPIO0[25] - External DMA Ack_n Output + * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs + * GPIO0[28-30] - Trace Outputs / PWM Inputs + * GPIO0[31] - PWM_8 I/O + */ +#define CFG_GPIO0_TCR 0xC0000000 +#define CFG_GPIO0_OSRL 0x50000000 +#define CFG_GPIO0_OSRH 0x00000055 +#define CFG_GPIO0_ISR1L 0x00000000 +#define CFG_GPIO0_ISR1H 0x00000055 +#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TSRH 0x00000055 + +/*----------------------------------------------------------------------- + * Definitions for GPIO_1 setup (PPC405EZ specific) + * + * GPIO1[0-6] - PWM_9 to PWM_15 I/O + * GPIO1[7] - PWM_DIV_CLK (Out) / IRQ4 Input + * GPIO1[8] - TS5 Output / DAC_IP_TRIG Input + * GPIO1[9] - TS6 Output / ADC_IP_TRIG Input + * GPIO1[10-12] - UART0 Control Inputs + * GPIO1[13] - UART0_DTR_N Output/IEEE_1588_TS Output/TMRCLK Input + * GPIO1[14] - UART0_RTS_N Output/SPI_SS_2_N Output + * GPIO1[15] - SPI_SS_3_N Output/UART0_RI_N Input + * GPIO1[16] - SPI_SS_1_N Output + * GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs + */ +#define CFG_GPIO1_OSRH 0x55455555 +#define CFG_GPIO1_OSRL 0x40000110 +#define CFG_GPIO1_ISR1H 0x00000000 +#define CFG_GPIO1_ISR1L 0x15555445 +#define CFG_GPIO1_TSRH 0x00000000 +#define CFG_GPIO1_TSRL 0x00000000 +#define CFG_GPIO1_TCR 0xFFFF8014 + +/*----------------------------------------------------------------------- + * EPLD Regs. + */ +#define EPLD_BASE 0x80000000 +#define EPLD_ETHRSTBOOT 0x10 +#define EPLD_CTRL 0x14 +#define EPLD_MUXOE 0x16 + +/* + * State definations + */ +#define LOAK_INIT 0x494e4954 /* ASCII "INIT" */ +#define LOAK_NONE 0x4e4f4e45 /* ASCII "NONE" */ +#define LOAK_CRAM 0x4352414d /* ASCII "CRAM" */ +#define LOAK_PSRAM 0x50535241 /* ASCII "PSRA" - PSRAM */ +#define LOAK_OCM 0x4f434d20 /* ASCII "OCM " */ +#define LOAK_ZERO 0x5a45524f /* ASCII "ZERO" */ +#define LOAK_SPL 0x53504c20 /* ASCII "SPL" */ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ + #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h new file mode 100644 index 0000000..65dfc81 --- /dev/null +++ b/include/configs/bf533-ezkit.h @@ -0,0 +1,228 @@ +/* + * U-boot - Configuration file for BF533 EZKIT board + */ + +#ifndef __CONFIG_EZKIT533_H__ +#define __CONFIG_EZKIT533_H__ + +#define CONFIG_BAUDRATE 57600 +#define CONFIG_STAMP 1 + +#define CONFIG_BOOTDELAY 5 +#define CFG_AUTOLOAD "no" /*rarpb, bootp or dhcp commands will perform only a */ + +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_LOADADDR 0x01000000 /* default load address */ +#define CONFIG_BOOTCOMMAND "tftp $(loadaddr) linux" +/* #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" */ + +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x20310300 + +#if 0 +#define CONFIG_MII +#define CFG_DISCOVER_PHY +#endif + +#define CONFIG_RTC_BFIN 1 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ + +/* + * Boot Mode Set + * Blackfin can support several boot modes + */ +#define BF533_BYPASS_BOOT 0x0001 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ +#define BF533_PARA_BOOT 0x0002 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ +#define BF533_SPI_BOOT 0x0004 /* Bootmode 3: Boot from SPI flash */ +/* Define the boot mode */ +#define BFIN_BOOT_MODE BF533_BYPASS_BOOT +/* #define BFIN_BOOT_MODE BF533_SPI_BOOT */ + +#define CONFIG_PANIC_HANG 1 + +#define ADSP_BF531 0x31 +#define ADSP_BF532 0x32 +#define ADSP_BF533 0x33 +#define BFIN_CPU ADSP_BF533 + +/* This sets the default state of the cache on U-Boot's boot */ +#define CONFIG_ICACHE_ON +#define CONFIG_DCACHE_ON + +/* Define where the uboot will be loaded by on-chip boot rom */ +#define APP_ENTRY 0x00001000 + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 27000000 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 22 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 +/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */ +/* Values can range from 2-65535 */ +/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ +#define CONFIG_SPI_BAUD 2 +#define CONFIG_SPI_BAUD_INITBLOCK 4 + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#define CONFIG_MEM_SIZE 32 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC16M16A2TG_75 1 + +#define CONFIG_LOADS_ECHO 1 + + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DATE) +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600" + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MEMTEST_START 0x00000000 /* memtest works on */ +#define CFG_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 1024 * 1024) /* 1 ... 31 MB in DRAM */ +#define CFG_LOAD_ADDR 0x01000000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) +#define CFG_FLASH_BASE 0x20000000 + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_FLASH0_BASE 0x20000000 +#define CFG_FLASH1_BASE 0x20200000 +#define CFG_FLASH2_BASE 0x20280000 +#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 40 /* max number of sectors on one chip */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 11 + + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#define POLL_MODE 1 +#define FLASH_TOT_SECT 40 +#define FLASH_SIZE 0x220000 +#define CFG_FLASH_SIZE 0x220000 + +/* + * Initialize PSD4256 registers for using I2C + */ +#define CONFIG_MISC_INIT_R + +/* + * I2C settings + * By default PF1 is used as SDA and PF0 as SCL on the Stamp board + */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF0 +#define PF_SDA PF1 + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE + +#define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ + +/* 0xFF, 0x7BB07BB0, 0x22547BB0 */ +/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \ + ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN) +#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \ + B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN) +*/ +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0x7BB07BB0 +#define AMBCTL1VAL 0xFFC27BB0 + +#define CONFIG_VDSP 1 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h new file mode 100644 index 0000000..79a1404 --- /dev/null +++ b/include/configs/bf533-stamp.h @@ -0,0 +1,467 @@ +/* + * U-boot - Configuration file for BF533 STAMP board + */ + +#ifndef __CONFIG_STAMP_H__ +#define __CONFIG_STAMP_H__ + +#define CONFIG_STAMP 1 +#define CONFIG_RTC_BFIN 1 +#define CONFIG_BF533 1 +/* + * Boot Mode Set + * Blackfin can support several boot modes + */ +#define BF533_BYPASS_BOOT 0x0001 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ +#define BF533_PARA_BOOT 0x0002 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ +#define BF533_SPI_BOOT 0x0004 /* Bootmode 3: Boot from SPI flash */ +/* Define the boot mode */ +#define BFIN_BOOT_MODE BF533_BYPASS_BOOT +/* #define BFIN_BOOT_MODE BF533_SPI_BOOT */ + +#define CONFIG_PANIC_HANG 1 + +#define ADSP_BF531 0x31 +#define ADSP_BF532 0x32 +#define ADSP_BF533 0x33 +#define BFIN_CPU ADSP_BF533 + +/* This sets the default state of the cache on U-Boot's boot */ +#define CONFIG_ICACHE_ON +#define CONFIG_DCACHE_ON + +/* Define where the uboot will be loaded by on-chip boot rom */ +#define APP_ENTRY 0x00001000 + +/* + * Stringize definitions - needed for environmental settings + */ +#define STRINGIZE2(x) #x +#define STRINGIZE(x) STRINGIZE2(x) + +/* + * Board settings + */ +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x20300300 + +/* FLASH/ETHERNET uses the same address range */ +#define SHARED_RESOURCES 1 + +/* Is I2C bit-banged? */ +#define CONFIG_SOFT_I2C 1 + +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF3 +#define PF_SDA PF2 + +/* + * Video splash screen support + */ +#define CONFIG_VIDEO 0 + +#define CONFIG_VDSP 1 + +/* + * Clock settings + */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 11059200 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 36 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is*/ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 +/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */ +/* Values can range from 2-65535 */ +/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ +#define CONFIG_SPI_BAUD 2 + +#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#define CONFIG_SPI_BAUD_INITBLOCK 4 +#endif + +/* + * Network settings + */ + +#if (CONFIG_DRIVER_SMC91111) +#if 0 +#define CONFIG_MII +#endif + +/* network support */ +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME STAMP +#define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs + +/* To remove hardcoding and enable MAC storage in EEPROM */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ +#endif /* CONFIG_DRIVER_SMC91111 */ + +/* + * Flash settings + */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_AMD_RESET + +#define CFG_FLASH_BASE 0x20000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ + +#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20004000 +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#define CFG_ENV_IS_IN_EEPROM 1 +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_HEADER (CFG_ENV_OFFSET + 0x12A) /* 0x12A is the length of LDR file header */ +#endif + +#define CFG_ENV_SIZE 0x2000 +#define CFG_ENV_SECT_SIZE 0x2000 /* Total Size of Environment Sector */ +#define ENV_IS_EMBEDDED + +#define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */ +#define CFG_FLASH_ERASEBLOCK_TOUT 5000 /* Timeout for Block Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 11 + +/* + * following timeouts shall be used once the + * Flash real protection is enabled + */ +#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ + +/* + * SDRAM settings & memory map + */ + +#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC64M4A2FB_7E 1 + +#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) +#define CFG_MEMTEST_START 0x00000000 /* memtest works on */ +#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#endif + +#define CFG_SDRAM_BASE 0x00000000 + +#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 *1024) +#define CFG_MEMTEST_END (CFG_MAX_RAM_SIZE - 0x80000 - 1) +#define CONFIG_LOADADDR 0x01000000 + +#define CFG_LOAD_ADDR CONFIG_LOADADDR +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_GBL_DATA_SIZE 0x4000 /* Reserve 16k for Global Data */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - 0x40000) +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +/* Check to make sure everything fits in SDRAM */ +#if ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) > CFG_MAX_RAM_SIZE) + #error Memory Map does not fit into configuration +#endif + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000) +#define CONFIG_SPI_FLASH_FAST_READ 1 /* Needed if SPI_CLK > 20 MHz */ +#else +#undef CONFIG_SPI_FLASH_FAST_READ +#endif +#endif + +/* + * Command settings + */ + +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) +#define CFG_AUTOLOAD "no" /*rarpb, bootp or dhcp commands will perform only a */ +#endif + +/* configuration lookup from the BOOTP/DHCP server, */ +/* but not try to load any image using TFTP */ + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ +#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) +#define CONFIG_BOOTCOMMAND "run ramboot" +#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#define CONFIG_BOOTCOMMAND "eeprom read 0x1000000 0x100000 0x180000;icache on;dcache on;bootm 0x1000000" +#endif + +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" + +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DATE) + +#else +#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ + CFG_CMD_ELF | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DATE) +#endif + +#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ + "$(rootpath) console=ttyBF0,57600\0" \ + "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \ + "$(gatewayip):$(netmask):$(hostname):eth0:off\0" \ + "ramboot=tftpboot $(loadaddr) linux; " \ + "run ramargs;run addip;bootelf\0" \ + "nfsboot=tftpboot $(loadaddr) linux; " \ + "run nfsargs;run addip;bootelf\0" \ + "flashboot=bootm 0x20100000\0" \ + "update=tftpboot $(loadaddr) u-boot.bin; " \ + "protect off 0x20000000 0x2003FFFF; erase 0x20000000 0x2003FFFF;" \ + "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \ + "" +#else +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "flashboot=bootm 0x20100000\0" \ + " +#endif + +#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ + "$(rootpath) console=ttyBF0,57600\0" \ + "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \ + "$(gatewayip):$(netmask):$(hostname):eth0:off\0" \ + "ramboot=tftpboot $(loadaddr) linux; " \ + "run ramargs;run addip;bootelf\0" \ + "nfsboot=tftpboot $(loadaddr) linux; " \ + "run nfsargs;run addip;bootelf\0" \ + "flashboot=bootm 0x20100000\0" \ + "update=tftpboot $(loadaddr) u-boot.ldr;" \ + "eeprom write $(loadaddr) 0x0 $(filesize);\0"\ + "" +#endif + +#ifdef CONFIG_SOFT_I2C +#if (!CONFIG_SOFT_I2C) +#undef CONFIG_SOFT_I2C +#endif +#endif + +#if (CONFIG_SOFT_I2C) +#define CONFIG_COMMANDS2 CFG_CMD_I2C +#else +#define CONFIG_COMMANDS2 0 +#endif /* CONFIG_SOFT_I2C */ + +#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) +#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 | CFG_CMD_DHCP) +#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2) +#endif + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Console settings + */ + +#define CONFIG_BAUDRATE 57600 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#if (BFIN_CPU == ADSP_BF531) +#define CFG_PROMPT "serial_bf531> " /* Monitor Command Prompt */ +#elif (BFIN_CPU == ADSP_BF532) +#define CFG_PROMPT "serial_bf532> " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "serial_bf533> " /* Monitor Command Prompt */ +#endif +#else +#if (BFIN_CPU == ADSP_BF531) +#define CFG_PROMPT "bf531> " /* Monitor Command Prompt */ +#elif (BFIN_CPU == ADSP_BF532) +#define CFG_PROMPT "bf532> " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "bf533> " /* Monitor Command Prompt */ +#endif +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_LOADS_ECHO 1 + +/* + * I2C settings + * By default PF2 is used as SDA and PF3 as SCL on the Stamp board + */ +#if (CONFIG_SOFT_I2C) + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE +#endif /* CONFIG_SOFT_I2C */ + +/* + * Compact Flash settings + */ + +/* Enabled below option for CF support */ +/* #define CONFIG_STAMP_CF 1 */ + +#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE) + +#define CONFIG_MISC_INIT_R 1 +#define CONFIG_DOS_PARTITION 1 +/* + * IDE/ATA stuff + */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ + +#define CFG_ATA_BASE_ADDR 0x20200000 +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */ + +#define CFG_ATA_STRIDE 2 +#endif + +/* + * Miscellaneous configurable options + */ + +#define CFG_HZ 1000 /* 1ms time tick */ + +#define CFG_BOOTM_LEN 0x4000000/* Large Image Length, set to 64 Meg */ + +#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ + +#define CONFIG_SPI + +#ifdef CONFIG_VIDEO +#if (CONFIG_VIDEO) +#define CONFIG_SPLASH_SCREEN 1 +#define CONFIG_SILENT_CONSOLE 1 +#else +#undef CONFIG_VIDEO +#endif +#endif + +/* + * FLASH organization and environment definitions + */ +#define CFG_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ + +/* 0xFF, 0xBBC3BBc3, 0x99B39983 */ +/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ + B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) +#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ + B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) +*/ +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0xBBC3BBC3 +#define AMBCTL1VAL 0x99B39983 +#define CF_AMBCTL1VAL 0x99B3ffc2 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h new file mode 100644 index 0000000..f6755ac --- /dev/null +++ b/include/configs/bf537-stamp.h @@ -0,0 +1,502 @@ +/* + * U-boot - Configuration file for BF537 STAMP board + */ + +#ifndef __CONFIG_BF537_H__ +#define __CONFIG_BF537_H__ + +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_BAUDRATE 57600 +/* Set default serial console for bf537 */ +#define CONFIG_UART_CONSOLE 0 +#define CONFIG_BF537 1 +#define CONFIG_BOOTDELAY 5 +/* define CONFIG_BF537_STAMP_LEDCMD to enable LED command*/ +/*#define CONFIG_BF537_STAMP_LEDCMD 1*/ + +/* + * Boot Mode Set + * Blackfin can support several boot modes + */ +#define BF537_BYPASS_BOOT 0x0011 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ +#define BF537_PARA_BOOT 0x0012 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ +#define BF537_SPI_MASTER_BOOT 0x0014 /* Bootmode 3: SPI master mode boot from SPI flash */ +#define BF537_SPI_SLAVE_BOOT 0x0015 /* Bootmode 4: SPI slave mode boot from SPI flash */ +#define BF537_TWI_MASTER_BOOT 0x0016 /* Bootmode 5: TWI master mode boot from EEPROM */ +#define BF537_TWI_SLAVE_BOOT 0x0017 /* Bootmode 6: TWI slave mode boot from EEPROM */ +#define BF537_UART_BOOT 0x0018 /* Bootmode 7: UART slave mdoe boot via UART host */ +/* Define the boot mode */ +#define BFIN_BOOT_MODE BF537_BYPASS_BOOT + +#define CONFIG_PANIC_HANG 1 + +#define ADSP_BF534 0x34 +#define ADSP_BF536 0x36 +#define ADSP_BF537 0x37 +#define BFIN_CPU ADSP_BF537 + +/* This sets the default state of the cache on U-Boot's boot */ +#define CONFIG_ICACHE_ON +#define CONFIG_DCACHE_ON + +/* Define if want to do post memory test */ +#undef CONFIG_POST_TEST + +/* Define where the uboot will be loaded by on-chip boot rom */ +#define APP_ENTRY 0x00001000 + +#define CONFIG_RTC_BFIN 1 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 25000000 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL*/ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 20 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is*/ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 +/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */ +/* Values can range from 2-65535 */ +/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ +#define CONFIG_SPI_BAUD 2 +#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#define CONFIG_SPI_BAUD_INITBLOCK 4 +#endif + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000) +#define CONFIG_SPI_FLASH_FAST_READ 1 /* Needed if SPI_CLK > 20 MHz */ +#else +#undef CONFIG_SPI_FLASH_FAST_READ +#endif +#endif + +#define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 10 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC32M8A2_75 1 + +#define CONFIG_LOADS_ECHO 1 + +/* + * rarpb, bootp or dhcp commands will perform only a + * configuration lookup from the BOOTP/DHCP server + * but not try to load any image using TFTP + */ +#define CFG_AUTOLOAD "no" + +/* + * Network Settings + */ +/* network support */ +#if (BFIN_CPU != ADSP_BF534) +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME BF537 +#endif + +#define CONFIG_ROOTPATH /romfs +/* Uncomment next line to use fixed MAC address */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ +/* This is the routine that copies the MAC in Flash to the 'ethaddr' setting */ + +#define CFG_LONGHELP 1 +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ +#define CONFIG_BOOTCOMMAND "run ramboot" + +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) && defined(CONFIG_POST_TEST) +/* POST support */ +#define CONFIG_POST ( CFG_POST_MEMORY | \ + CFG_POST_UART | \ + CFG_POST_FLASH | \ + CFG_POST_ETHER | \ + CFG_POST_LED | \ + CFG_POST_BUTTON) +#else +#undef CONFIG_POST +#endif + +#ifdef CONFIG_POST +#define CFG_CMD_POST_DIAG CFG_CMD_DIAG +#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */ +#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */ +#else +#define CFG_CMD_POST_DIAG 0 +#endif + +/* CF-CARD IDE-HDD Support */ + +/* #define CONFIG_BFIN_TRUE_IDE */ /* Add CF flash card support */ +/* #define CONFIG_BFIN_CF_IDE */ /* Add CF flash card support */ +/* #define CONFIG_BFIN_HDD_IDE */ /* Add IDE Disk Drive (HDD) support */ + +#if defined(CONFIG_BFIN_CF_IDE) || defined(CONFIG_BFIN_HDD_IDE) || defined(CONFIG_BFIN_TRUE_IDE) +# define CONFIG_BFIN_IDE 1 +# define ADD_IDE_CMD CFG_CMD_IDE +#else +# define ADD_IDE_CMD 0 +#endif + +/*#define CONFIG_BF537_NAND */ /* Add nand flash support */ + +#ifdef CONFIG_BF537_NAND +# define ADD_NAND_CMD CFG_CMD_NAND +#else +# define ADD_NAND_CMD 0 +#endif + +#define CONFIG_NETCONSOLE 1 +#define CONFIG_NET_MULTI 1 + +#if (BFIN_CPU == ADSP_BF534) +#define CONFIG_BFIN_CMD (CONFIG_CMD_DFL & ~CFG_CMD_NET) +#else +#define CONFIG_BFIN_CMD (CONFIG_CMD_DFL | CFG_CMD_PING) +#endif + +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) +#define CONFIG_COMMANDS (CONFIG_BFIN_CMD| \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DHCP | \ + ADD_IDE_CMD | \ + ADD_NAND_CMD | \ + CFG_CMD_POST_DIAG | \ + CFG_CMD_DATE) +#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#define CONFIG_COMMANDS (CONFIG_BFIN_CMD| \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_EEPROM | \ + ADD_IDE_CMD | \ + CFG_CMD_DATE) +#endif + +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" +#define CONFIG_LOADADDR 0x1000000 + +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) +#if (BFIN_CPU != ADSP_BF534) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath) console=ttyBF0,57600\0"\ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):eth0:off\0" \ + "ramboot=tftpboot $(loadaddr) linux;" \ + "run ramargs;run addip;bootelf\0" \ + "nfsboot=tftpboot $(loadaddr) linux;" \ + "run nfsargs;run addip;bootelf\0" \ + "flashboot=bootm 0x20100000\0" \ + "update=tftpboot $(loadaddr) u-boot.bin;" \ + "protect off 0x20000000 0x2007FFFF;" \ + "erase 0x20000000 0x2007FFFF;cp.b 0x1000000 0x20000000 $(filesize)\0" \ + "" +#else +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "flashboot=bootm 0x20100000\0" \ + "" +#endif +#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#if (BFIN_CPU != ADSP_BF534) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath) console=ttyBF0,57600\0"\ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):eth0:off\0" \ + "ramboot=tftpboot $(loadaddr) linux;" \ + "run ramargs;run addip;bootelf\0" \ + "nfsboot=tftpboot $(loadaddr) linux;" \ + "run nfsargs;run addip;bootelf\0" \ + "flashboot=bootm 0x20100000\0" \ + "update=tftpboot $(loadaddr) u-boot.ldr;" \ + "eeprom write $(loadaddr) 0x0 $(filesize);\0" \ + "" +#else +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "flashboot=bootm 0x20100000\0" \ + "" +#endif +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#if (BFIN_CPU == ADSP_BF534) +#define CFG_PROMPT "serial_bf534> " /* Monitor Command Prompt */ +#elif (BFIN_CPU == ADSP_BF536) +#define CFG_PROMPT "serial_bf536> " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "serial_bf537> " /* Monitor Command Prompt */ +#endif +#else +#if (BFIN_CPU == ADSP_BF534) +#define CFG_PROMPT "bf534> " /* Monitor Command Prompt */ +#elif (BFIN_CPU == ADSP_BF536) +#define CFG_PROMPT "bf536> " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "bf537> " /* Monitor Command Prompt */ +#endif +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024*1024) +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MEMTEST_START 0x0 /* memtest works on */ +#define CFG_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 1024*1024) /* 1 ... 63 MB in DRAM */ +#define CFG_LOAD_ADDR CONFIG_LOADADDR /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_SDRAM_BASE 0x00000000 + +#define CFG_FLASH_BASE 0x20000000 + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ + +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_UART_BOOT) +/* for bf537-stamp, usrt boot mode still store env in flash */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20004000 +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#define CFG_ENV_IS_IN_EEPROM 1 +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_HEADER (CFG_ENV_OFFSET + 0x16e) /* 0x12A is the length of LDR file header */ +#endif +#define CFG_ENV_SIZE 0x2000 +#define CFG_ENV_SECT_SIZE 0x2000 /* Total Size of Environment Sector */ +/* #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) */ +#define ENV_IS_EMBEDDED +/* #endif */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 15 + +#define CONFIG_SPI + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#define POLL_MODE 1 +#define FLASH_TOT_SECT 71 +#define FLASH_SIZE 0x400000 +#define CFG_FLASH_SIZE 0x400000 + +/* + * Board NAND Infomation + */ + +#define CFG_NAND_ADDR 0x20212000 +#define CFG_NAND_BASE CFG_NAND_ADDR +#define CFG_MAX_NAND_DEVICE 1 +#define SECTORSIZE 512 +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define BFIN_NAND_READY PF3 + +#define NAND_WAIT_READY(nand) \ + do { \ + int timeout = 0; \ + while(!(*pPORTFIO & PF3)) \ + if (timeout++ > 100000) \ + break; \ + } while (0) + +#define BFIN_NAND_CLE (1<<2) /* A2 -> Command Enable */ +#define BFIN_NAND_ALE (1<<1) /* A1 -> Address Enable */ + +#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | BFIN_NAND_CLE) = (__u8)(d); } while(0) +#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | BFIN_NAND_ALE) = (__u8)(d); } while(0) +#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) +#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) + +/* + * Initialize PSD4256 registers for using I2C + */ +#define CONFIG_MISC_INIT_R + +#define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ + +/* + * I2C settings + * By default PF1 is used as SDA and PF0 as SCL on the Stamp board + */ +/* #define CONFIG_SOFT_I2C 1*/ /* I2C bit-banged */ +#define CONFIG_HARD_I2C 1 /* I2C TWI */ +#if defined CONFIG_HARD_I2C +#define CONFIG_TWICLK_KHZ 50 +#endif + +#if defined CONFIG_SOFT_I2C +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF0 +#define PF_SDA PF1 + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ +#endif + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE + +/* 0xFF, 0x7BB07BB0, 0x22547BB0 */ +/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \ + ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN) +#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \ + B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN) +*/ + +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0x7BB07BB0 +#define AMBCTL1VAL 0xFFC27BB0 + +#define CONFIG_VDSP 1 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#if defined(CONFIG_BFIN_IDE) + +#define CONFIG_DOS_PARTITION 1 +/* + * IDE/ATA stuff + */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ + +#undef AMBCTL1VAL +#define AMBCTL1VAL 0xFFC3FFC3 + +#define CONFIG_CF_ATASEL_DIS 0x20311800 +#define CONFIG_CF_ATASEL_ENA 0x20311802 + +#if defined(CONFIG_BFIN_TRUE_IDE) +/* + * Note that these settings aren't for the most part used in include/ata.h + * when all of the ATA registers are setup + */ +#define CFG_ATA_BASE_ADDR 0x2031C000 +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x001C /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 2 /* CF.A0 --> Blackfin.Ax */ +#endif /* CONFIG_BFIN_TRUE_IDE */ + +#if defined(CONFIG_BFIN_CF_IDE) /* USE CompactFlash Storage Card in the common memory space */ +#define CFG_ATA_BASE_ADDR 0x20211800 +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x000E /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 1 /* CF.A0 --> Blackfin.Ax */ +#endif /* CONFIG_BFIN_CF_IDE */ + +#if defined(CONFIG_BFIN_HDD_IDE) /* USE TRUE IDE */ +#define CFG_ATA_BASE_ADDR 0x20314000 +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x001C /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 2 /* CF.A0 --> Blackfin.A1 */ + +#undef CONFIG_SCLK_DIV +#define CONFIG_SCLK_DIV 8 +#endif /* CONFIG_BFIN_HDD_IDE */ + +#endif /*CONFIG_BFIN_IDE */ + +#endif diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h new file mode 100644 index 0000000..8d826fa --- /dev/null +++ b/include/configs/bf561-ezkit.h @@ -0,0 +1,244 @@ +/* + * U-boot - Configuration file for BF561 EZKIT board + */ + +#ifndef __CONFIG_EZKIT561_H__ +#define __CONFIG_EZKIT561_H__ + +#define CONFIG_VDSP 1 +#define CONFIG_BF561 1 + +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_BAUDRATE 57600 +/* Set default serial console for bf537 */ +#define CONFIG_UART_CONSOLE 0 +#define CONFIG_EZKIT561 1 +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_PANIC_HANG 1 + +/* +* Boot Mode Set +* Blackfin can support several boot modes +*/ +#define BF561_BYPASS_BOOT 0x21 +#define BF561_PARA_BOOT 0x22 +#define BF561_SPI_BOOT 0x24 +/* Define the boot mode */ +#define BFIN_BOOT_MODE BF561_BYPASS_BOOT + +/* This sets the default state of the cache on U-Boot's boot */ +#define CONFIG_ICACHE_ON +#define CONFIG_DCACHE_ON + +/* Define where the uboot will be loaded by on-chip boot rom */ +#define APP_ENTRY 0x00001000 + +/* + * Stringize definitions - needed for environmental settings + */ +#define STRINGIZE2(x) #x +#define STRINGIZE(x) STRINGIZE2(x) + +/* + * Board settings + */ +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x2C010300 +#define CONFIG_ASYNC_EBIU_BASE CONFIG_SMC91111_BASE & ~(4*1024*1024) +#define CONFIG_SMC_USE_32_BIT 1 +#define CONFIG_MISC_INIT_R 1 + +/* + * Clock settings + */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 30000000 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 20 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 +/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */ +/* Values can range from 2-65535 */ +/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ +#define CONFIG_SPI_BAUD 2 +#define CONFIG_SPI_BAUD_INITBLOCK 4 + +/* + * Network settings + */ +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME ezkit561 +#define CONFIG_ROOTPATH /arm-cross-build/BF561/uClinux-dist/romfs +#endif /* CONFIG_DRIVER_SMC91111 */ + +/* + * Flash settings + */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_AMD_RESET +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_FLASH_BASE 0x20000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 135 /* max number of sectors on one chip */ +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 8 + +/* + * SDRAM settings & memory map + */ + +#define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC16M16A2TG_75 1 + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) + +#define CFG_MEMTEST_START 0x0 /* memtest works on */ +#define CFG_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 1024*1024) /* 1 ... 63 MB in DRAM */ + +#define CONFIG_LOADADDR 0x01000000 /* default load address */ +#define CFG_LOAD_ADDR CONFIG_LOADADDR +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) + +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) + +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +/* + * Command settings + */ + +#define CFG_AUTOLOAD "no" /* rarpb, bootp, dhcp commands will */ + /* only perform a configuration */ + /* lookup from the BOOTP/DHCP server */ + /* but not try to load any image */ + /* using TFTP */ +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, */ + /* currently its disabled */ +#define CONFIG_BOOTCOMMAND "run ramboot" +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" + +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DHCP) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ + "$(rootpath) console=ttyBF0,57600\0" \ + "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \ + "$(gatewayip):$(netmask):$(hostname):eth0:off\0" \ + "ramboot=tftpboot $(loadaddr) linux; " \ + "run ramargs; run addip; bootelf\0" \ + "nfsboot=tftpboot $(loadaddr) linux; " \ + "run nfsargs; run addip; bootelf\0" \ + "update=tftpboot $(loadaddr) u-boot.bin; " \ + "protect off 0x20000000 0x2003FFFF; " \ + "erase 0x20000000 0x2003FFFF; " \ + "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \ + "" +#else +#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ + CFG_CMD_ELF | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "flashboot=bootm 0x20100000\0" \ + "" +#endif + +#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Console settings + */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_LOADS_ECHO 1 + +/* + * Miscellaneous configurable options + */ +#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ +#define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ + +/* + * FLASH organization and environment definitions + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +#define AMGCTLVAL 0x3F +#define AMBCTL0VAL 0x7BB07BB0 +#define AMBCTL1VAL 0xFFC27BB0 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif /* __CONFIG_EZKIT561_H__ */ diff --git a/include/configs/ebony.h b/include/configs/ebony.h index 6c4d7cc..a42319b 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -133,8 +133,9 @@ /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x53,0x52} /* SPD i2c spd addresses */ +#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x53,0x52} /* SPD i2c spd addresses */ +#define CONFIG_PROG_SDRAM_TLB 1 /* setup SDRAM TLB's dynamically*/ /*----------------------------------------------------------------------- * I2C diff --git a/include/configs/ezkit533.h b/include/configs/ezkit533.h deleted file mode 100644 index 5eda673..0000000 --- a/include/configs/ezkit533.h +++ /dev/null @@ -1,188 +0,0 @@ -#ifndef __CONFIG_EZKIT533_H__ -#define __CONFIG_EZKIT533_H__ - -#define CFG_LONGHELP 1 -#define CONFIG_BAUDRATE 57600 -#define CONFIG_STAMP 1 -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_DRIVER_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x20310300 -#if 0 -#define CONFIG_MII -#define CFG_DISCOVER_PHY -#endif - -#define CONFIG_RTC_BF533 1 -#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ - -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 27000000 -/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ -/* 1=CLKIN/2 */ -#define CONFIG_CLKIN_HALF 0 -/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ -/* 1=bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ -/* Values can range from 1-64 */ -#define CONFIG_VCO_MULT 22 -/* CONFIG_CCLK_DIV controls what the core clock divider is */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 5 - -#if ( CONFIG_CLKIN_HALF == 0 ) -#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) -#else -#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) -#endif - -#if (CONFIG_PLL_BYPASS == 0) -#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) -#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#define CONFIG_MEM_SIZE 32 /* 128, 64, 32, 16 */ -#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */ -#define CONFIG_MEM_MT48LC16M16A2TG_75 1 - -#define CONFIG_LOADS_ECHO 1 - - -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DATE) -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off" - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x01F00000 /* 1 ... 31 MB in DRAM */ -#define CFG_LOAD_ADDR 0x01000000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_MAX_RAM_SIZE 0x02000000 -#define CFG_FLASH_BASE 0x20000000 - -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) -#define CFG_GBL_DATA_SIZE 0x4000 -#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) -#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) - -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#define CFG_FLASH0_BASE 0x20000000 -#define CFG_FLASH1_BASE 0x20200000 -#define CFG_FLASH2_BASE 0x20280000 -#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 40 /* max number of sectors on one chip */ - -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR 0x20020000 -#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ - -/* JFFS Partition offset set */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_NUM_BANKS 1 -/* 512k reserved for u-boot */ -#define CFG_JFFS2_FIRST_SECTOR 11 - - -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - -#define POLL_MODE 1 -#define FLASH_TOT_SECT 40 -#define FLASH_SIZE 0x220000 -#define CFG_FLASH_SIZE 0x220000 - -/* - * Initialize PSD4256 registers for using I2C - */ -#define CONFIG_MISC_INIT_R - -/* - * I2C settings - * By default PF1 is used as SDA and PF0 as SCL on the Stamp board - */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -/* - * Software (bit-bang) I2C driver configuration - */ -#define PF_SCL PF0 -#define PF_SDA PF1 - -#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") -#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") -#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") -#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") -#define I2C_SDA(bit) if(bit) { \ - *pFIO_FLAG_S = PF_SDA; \ - asm("ssync;"); \ - } \ - else { \ - *pFIO_FLAG_C = PF_SDA; \ - asm("ssync;"); \ - } -#define I2C_SCL(bit) if(bit) { \ - *pFIO_FLAG_S = PF_SCL; \ - asm("ssync;"); \ - } \ - else { \ - *pFIO_FLAG_C = PF_SCL; \ - asm("ssync;"); \ - } -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#define CFG_I2C_SPEED 50000 -#define CFG_I2C_SLAVE 0xFE - - -#define __ADSPLPBLACKFIN__ 1 -#define __ADSPBF533__ 1 - -/* 0xFF, 0x7BB07BB0, 0x22547BB0 */ -/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) -#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \ - ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN) -#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \ - B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN) -*/ -#define AMGCTLVAL 0xFF -#define AMBCTL0VAL 0x7BB07BB0 -#define AMBCTL1VAL 0xFFC27BB0 - -#define CONFIG_VDSP 1 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif - -#endif diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index cfaf153..095b5f6 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -210,6 +210,7 @@ */ #define CONFIG_MPC5xxx_FEC 1 #define CONFIG_PHY_ADDR 0x00 +#define CONFIG_MII 1 /* MII PHY management */ /* * GPIO configuration diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h new file mode 100644 index 0000000..5b97526 --- /dev/null +++ b/include/configs/jupiter.h @@ -0,0 +1,291 @@ +/* + * (C) Copyright 2007 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* especially an MPC5200 */ +#define CONFIG_JUPITER 1 /* ... on Jupiter board */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define CONFIG_BOARD_EARLY_INIT_R 1 +#define CONFIG_BOARD_EARLY_INIT_F 1 + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + */ +/*#define CONFIG_PCI */ + +#if defined(CONFIG_PCI) +#define CONFIG_PCI_PNP 1 +#define CONFIG_PCI_SCAN_SHOW 1 + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 +#define ADD_PCI_CMD CFG_CMD_PCI +#endif + +#define CFG_XLB_PIPELINING 1 + +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 +#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_NFS | \ + CFG_CMD_SNTP) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip addcons;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "addcons=setenv bootargs ${bootargs} console=${contyp}," \ + "${baudrate}\0" \ + "contyp=ttyS0\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "bootfile=/tftpboot/jupiter/uImage\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +/* + * IPB Bus clocking configuration. + */ +#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ + +#if 0 +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 8) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" +#endif + +#if 0 +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ + +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 +#endif + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE 0xFF000000 +#define CFG_FLASH_SIZE 0x01000000 + +#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ + +#define CFG_ENV_ADDR (TEXT_BASE + 0x40000) /* third sector */ + +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT +#define CFG_UPDATE_FLASH_SIZE 1 +#define CFG_FLASH_USE_BUFFER_WRITE 1 + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x20000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_OVERWRITE 1 + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +/* + * Define CONFIG_FEC_10MBIT to force FEC at 10Mb + */ +/* #define CONFIG_FEC_10MBIT 1 */ +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration + */ +#define CFG_GPS_PORT_CONFIG 0x10000004 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ +#define CFG_ALT_MEMTEST 1 + +#define CFG_LOAD_ADDR 0x200000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00047801 +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333333 + +#define CFG_RESET_ADDRESS 0xff000000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index f350155..1606d0d 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -108,6 +108,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses*/ +#define CONFIG_DDR_ECC 1 /* with ECC support */ #undef CONFIG_STRESS /*----------------------------------------------------------------------- diff --git a/include/configs/luan.h b/include/configs/luan.h index 5c9d208..9c8769b 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -37,8 +37,9 @@ #define CONFIG_440 1 #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -132,10 +133,9 @@ /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#undef CONFIG_SPD_EEPROM /* SPD EEPROM init doesn't support DDR2 */ -#define SPD_EEPROM_ADDRESS {0x52,0x53} /* I2C SPD addresses */ -#define IIC0_DIMM0_ADDR 0x52 -#define IIC0_DIMM1_ADDR 0x53 +#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ +#undef CONFIG_DDR_ECC /* no ECC support for now */ /*----------------------------------------------------------------------- * I2C @@ -206,11 +206,6 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* needed for NetConsole */ -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION - #ifdef DEBUG #define CONFIG_PANIC_HANG #else @@ -219,9 +214,7 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ - CFG_CMD_CACHE | \ CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ CFG_CMD_ELF | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ @@ -232,7 +225,6 @@ CFG_CMD_PCI | \ CFG_CMD_PING | \ CFG_CMD_REGINFO | \ - CFG_CMD_SETGETDCR | \ CFG_CMD_SDRAM | \ 0) diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index 0e3660b..fe4e638 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -148,8 +148,9 @@ /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x53,0x52} /* SPD i2c spd addresses */ +#define CONFIG_PROG_SDRAM_TLB 1 /* setup SDRAM TLB's dynamically*/ /*----------------------------------------------------------------------- * I2C diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h new file mode 100644 index 0000000..65aac5c --- /dev/null +++ b/include/configs/sbc8349.h @@ -0,0 +1,734 @@ +/* + * WindRiver SBC8349 U-Boot configuration file. + * Copyright (c) 2006, 2007 Wind River Systems, Inc. + * + * Paul Gortmaker <paul.gortmaker@windriver.com> + * Based on the MPC8349EMDS config. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * sbc8349 board configuration file. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 Family */ +#define CONFIG_MPC83XX 1 /* MPC83XX family */ +#define CONFIG_MPC834X 1 /* MPC834X family */ +#define CONFIG_MPC8349 1 /* MPC8349 specific */ +#define CONFIG_SBC8349 1 /* WRS SBC8349 board specific */ + +#undef CONFIG_PCI +/* Don't enable PCI2 on sbc834x - it doesn't exist physically. */ +#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ + +#define PCI_66M +#ifdef PCI_66M +#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ +#else +#define CONFIG_83XX_CLKIN 33000000 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#ifdef PCI_66M +#define CONFIG_SYS_CLK_FREQ 66000000 +#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 +#else +#define CONFIG_SYS_CLK_FREQ 33000000 +#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 +#endif +#endif + +#undef CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +#define CFG_IMMR 0xE0000000 + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00000000 /* memtest region */ +#define CFG_MEMTEST_END 0x00100000 + +/* + * DDR Setup + */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ +#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ +#define CFG_83XX_DDR_USES_CS0 /* WRS; Fsl board uses CS2/CS3 */ + +/* + * 32-bit data path mode. + * + * Please note that using this mode for devices with the real density of 64-bit + * effectively reduces the amount of available memory due to the effect of + * wrapping around while translating address to row/columns, for example in the + * 256MB module the upper 128MB get aliased with contents of the lower + * 128MB); normally this define should be used for devices with real 32-bit + * data path. + */ +#undef CONFIG_DDR_32BIT + +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) +#define CONFIG_DDR_2T_TIMING + +#if defined(CONFIG_SPD_EEPROM) +/* + * Determine DDR configuration from I2C interface. + */ +#define SPD_EEPROM_ADDRESS 0x52 /* DDR DIMM */ + +#else +/* + * Manually set up DDR parameters + * NB: manual DDR setup untested on sbc834x + */ +#define CFG_DDR_SIZE 256 /* MB */ +#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) +#define CFG_DDR_TIMING_1 0x36332321 +#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ +#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ +#define CFG_DDR_INTERVAL 0x04060100 /* autocharge,no open page */ + +#if defined(CONFIG_DDR_32BIT) +/* set burst length to 8 for 32-bit data path */ +#define CFG_DDR_MODE 0x00000023 /* DLL,normal,seq,4/2.5, 8 burst len */ +#else +/* the default burst length is 4 - for 64-bit data path */ +#define CFG_DDR_MODE 0x00000022 /* DLL,normal,seq,4/2.5, 4 burst len */ +#endif +#endif + +/* + * SDRAM on the Local Bus + */ +#define CFG_LBC_SDRAM_BASE 0x10000000 /* Localbus SDRAM */ +#define CFG_LBC_SDRAM_SIZE 128 /* LBC SDRAM is 128MB */ + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFF800000 /* start of FLASH */ +#define CFG_FLASH_SIZE 8 /* flash size in MB */ +/* #define CFG_FLASH_USE_BUFFER_WRITE */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 32 bit port size */ \ + BR_V) /* valid */ + +#define CFG_OR0_PRELIM 0xFF806FF7 /* 8 MB flash size */ +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 64 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CFG_MID_FLASH_JUMP 0x7F000000 +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Local Bus LCRR and LBCR regs + * LCRR: DLL bypass, Clock divider is 4 + * External Local Bus rate is + * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CFG_LBC_LBCR 0x00000000 + +#undef CFG_LB_SDRAM /* if board has SDRAM on local bus */ + +#ifdef CFG_LB_SDRAM +/* Local bus BR2, OR2 definition for SDRAM if soldered on the board*/ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port-size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 + * + * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into + * FIXME: the top 17 bits of BR2. + */ + +#define CFG_BR2_PRELIM 0xF0001861 /* Port-size=32bit, MSEL=SDRAM */ +#define CFG_LBLAWBAR2_PRELIM 0xF0000000 +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64M */ + +/* + * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. + * + * For OR2, need: + * 64MB mask for AM, OR2[0:7] = 1111 1100 + * XAM, OR2[17:18] = 11 + * 9 columns OR2[19-21] = 010 + * 13 rows OR2[23-25] = 100 + * EAD set for extra time OR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901 + */ + +#define CFG_OR2_PRELIM 0xFC006901 + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1)) +#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10)) +#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10)) +#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16)) +#define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16)) +#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16)) +#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) +#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22)) +#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) +#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) +#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23)) +#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27)) +#define CFG_LBC_LSDMR_WRC3 (3 << (31 - 27)) +#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27)) +#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29)) +#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31)) + +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \ + | CFG_LBC_LSDMR_BSMA1516 \ + | CFG_LBC_LSDMR_RFCR8 \ + | CFG_LBC_LSDMR_PRETOACT6 \ + | CFG_LBC_LSDMR_ACTTORW3 \ + | CFG_LBC_LSDMR_BL8 \ + | CFG_LBC_LSDMR_WRC3 \ + | CFG_LBC_LSDMR_CL3 \ + ) + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) +#endif + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8349@0" +#define OF_SOC "soc8349@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ +#define CFG_I2C1_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 +#define CFG_I2C_OFFSET CFG_I2C2_OFFSET +/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SPD_BUS_NUM... */ + +/* TSEC */ +#define CFG_TSEC1_OFFSET 0x24000 +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) +#define CFG_TSEC2_OFFSET 0x25000 +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CFG_PCI2_MEM_BASE 0xA0000000 +#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_MMIO_BASE 0xB0000000 +#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE +#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_IO_BASE 0x00000000 +#define CFG_PCI2_IO_PHYS 0xE2100000 +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ + +#if defined(CONFIG_PCI) + +#define PCI_64BIT +#define PCI_ONE_PCI1 +#if defined(PCI_64BIT) +#undef PCI_ALL_PCI1 +#undef PCI_TWO_PCI1 +#undef PCI_ONE_PCI1 +#endif + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_TULIP + +#if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xFIXME + #define PCI_ENET0_MEMADDR 0xFIXME + #define PCI_IDSEL_NUMBER 0xFIXME +#endif + +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ + +#endif /* CONFIG_PCI */ + +/* + * TSEC configuration + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ + +#if defined(CONFIG_TSEC_ENET) +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +#define CONFIG_MPC83XX_TSEC1 1 +#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" +#define CONFIG_MPC83XX_TSEC2 1 +#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_PHY_BCM5421S 1 +#define TSEC1_PHY_ADDR 0x19 +#define TSEC2_PHY_ADDR 0x1a +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC0" + +#endif /* CONFIG_TSEC_ENET */ + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_PCI \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#else +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#endif +#else +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PCI \ + | CFG_CMD_PING \ + | CFG_CMD_I2C \ + ) +#else +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_I2C \ + | CFG_CMD_MII \ + ) +#endif +#endif + +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#endif + +#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#if 1 /*528/264*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X2 |\ + HRCWL_CORE_TO_CSB_2X1) +#elif 0 /*396/132*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_3X1) +#elif 0 /*264/132*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_2X1) +#elif 0 /*132/132*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_1X1) +#elif 0 /*264/264 */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_1X1) +#endif + +#if defined(PCI_64BIT) +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_64_BIT_PCI |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCI2_ARBITER_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_TSEC1M_IN_GMII |\ + HRCWH_TSEC2M_IN_GMII ) +#else +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_32_BIT_PCI |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCI2_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_TSEC1M_IN_GMII |\ + HRCWH_TSEC2M_IN_GMII ) +#endif + +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 +#define CFG_SICRL SICRL_LDP_A + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK + +/* #define CFG_HID0_FINAL (\ + HID0_ENABLE_INSTRUCTION_CACHE |\ + HID0_ENABLE_M_BIT |\ + HID0_ENABLE_ADDRESS_BROADCAST ) */ + + +#define CFG_HID2 HID2_HBE + +/* DDR @ 0x00000000 */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#ifdef CONFIG_PCI +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT1L (0) +#define CFG_IBAT1U (0) +#define CFG_IBAT2L (0) +#define CFG_IBAT2U (0) +#endif + +#ifdef CONFIG_MPC83XX_PCI2 +#define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_IBAT4L (0) +#define CFG_IBAT4U (0) +#endif + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */ +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_ETHADDR 00:a0:1e:a0:13:8d +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:a0:1e:a0:13:8e +#endif + +#define CONFIG_IPADDR 192.168.1.234 + +#define CONFIG_HOSTNAME SBC8349 +#define CONFIG_ROOTPATH /tftpboot/rootfs +#define CONFIG_BOOTFILE uImage + +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.255.0 + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=sbc8349\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "load=tftp 100000 /tftpboot/sbc8349/u-boot.bin\0" \ + "update=protect off fff00000 fff3ffff; " \ + "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \ + "upd=run load;run update\0" \ + "fdtaddr=400000\0" \ + "fdtfile=sbc8349.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +#endif /* __CONFIG_H */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index f2f0598..8298084 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -113,10 +113,13 @@ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=ttyS0,${baudrate}\0" \ + "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "flash_nand=run nand_args addip addcon;bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "flash_nand=run nand_args addip addcons;bootm ${kernel_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \ + "bootm\0" \ "rootpath=/opt/eldk/ppc_4xx\0" \ "bootfile=/tftpboot/sc3/uImage\0" \ "u-boot=/tftpboot/sc3/u-boot.bin\0" \ diff --git a/include/configs/stamp.h b/include/configs/stamp.h deleted file mode 100644 index 248ca70..0000000 --- a/include/configs/stamp.h +++ /dev/null @@ -1,333 +0,0 @@ -/* - * U-boot - stamp.h Configuration file for STAMP board - * having BF533 processor - * - * Copyright (c) 2005 blackfin.uclinux.org - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_STAMP_H__ -#define __CONFIG_STAMP_H__ - -/* - * Board settings - * - */ - -#define __ADSPLPBLACKFIN__ 1 -#define __ADSPBF533__ 1 -#define CONFIG_STAMP 1 -#define CONFIG_RTC_BF533 1 - -/* FLASH/ETHERNET uses the same address range */ -#define SHARED_RESOURCES 1 - -#define CONFIG_VDSP 1 - -/* - * Clock settings - * - */ - -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 11059200 -/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ -/* 1=CLKIN/2 */ -#define CONFIG_CLKIN_HALF 0 -/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ -/* 1=bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ -/* Values can range from 1-64 */ -#define CONFIG_VCO_MULT 45 -/* CONFIG_CCLK_DIV controls what the core clock divider is */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 6 - -/* - * Network Settings - */ -/* network support */ -#define CONFIG_IPADDR 192.168.0.15 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_SERVERIP 192.168.0.2 -#define CONFIG_HOSTNAME STAMP -#define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs - -/* To remove hardcoding and enable MAC storage in EEPROM */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ - -/* - * Command settings - * - */ - -#define CFG_LONGHELP 1 - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ -#define CONFIG_BOOTCOMMAND "run ramboot" -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" - -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DATE) -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ - ":$(hostname):eth0:off\0" \ - "ramboot=tftpboot 0x1000000 linux;" \ - "run ramargs;run addip;bootelf\0" \ - "nfsboot=tftpboot 0x1000000 linux;" \ - "run nfsargs;run addip;bootelf\0" \ - "flashboot=bootm 0x20100000\0" \ - "" - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -/* - * Console settings - * - */ - -#define CONFIG_BAUDRATE 57600 -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#define CFG_PROMPT "stamp>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_LOADS_ECHO 1 - -/* - * Network settings - * - */ - -#define CONFIG_DRIVER_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x20300300 -/* To remove hardcoding and enable MAC storage in EEPROM */ -/* #define HARDCODE_MAC 1 */ - -/* - * Flash settings - * - */ - -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CFG_FLASH_CFI_AMD_RESET - -#define CFG_ENV_IS_IN_FLASH 1 - -#define CFG_FLASH_BASE 0x20000000 -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CFG_ENV_ADDR 0x20020000 -#define CFG_ENV_SIZE 0x10000 -#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ - -#define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */ -#define CFG_FLASH_ERASEBLOCK_TOUT 5000 /* Timeout for Block Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ - -/* JFFS Partition offset set */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_NUM_BANKS 1 -/* 512k reserved for u-boot */ -#define CFG_JFFS2_FIRST_SECTOR 11 - -/* - * following timeouts shall be used once the - * Flash real protection is enabled - */ -#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ - -/* - * I2C settings - * By default PF2 is used as SDA and PF3 as SCL on the Stamp board - */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -/* - * Software (bit-bang) I2C driver configuration - */ -#define PF_SCL PF3 -#define PF_SDA PF2 - -#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") -#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") -#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") -#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") -#define I2C_SDA(bit) if(bit) { \ - *pFIO_FLAG_S = PF_SDA; \ - asm("ssync;"); \ - } \ - else { \ - *pFIO_FLAG_C = PF_SDA; \ - asm("ssync;"); \ - } -#define I2C_SCL(bit) if(bit) { \ - *pFIO_FLAG_S = PF_SCL; \ - asm("ssync;"); \ - } \ - else { \ - *pFIO_FLAG_C = PF_SCL; \ - asm("ssync;"); \ - } -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#define CFG_I2C_SPEED 50000 -#define CFG_I2C_SLAVE 0xFE - -/* - * Compact Flash settings - */ - -/* Enabled below option for CF support */ -/* #define CONFIG_STAMP_CF 1 */ - -#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE) - -#define CONFIG_MISC_INIT_R 1 -#define CONFIG_DOS_PARTITION 1 - -/* - * IDE/ATA stuff - */ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* no reset for ide supported */ - -#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ - -#define CFG_ATA_BASE_ADDR 0x20200000 -#define CFG_ATA_IDE0_OFFSET 0x0000 - -#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ -#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ -#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */ - -#define CFG_ATA_STRIDE 2 -#endif - -/* - * SDRAM settings - * - */ - -#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */ -#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ -#define CONFIG_MEM_MT48LC64M4A2FB_7E 1 - -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x07EFFFFF /* 1 ... 127 MB in DRAM */ -#define CFG_LOAD_ADDR 0x01000000 /* default load address */ - -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_MAX_RAM_SIZE 0x08000000 - -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) - -#if ( CONFIG_CLKIN_HALF == 0 ) -#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) -#else -#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) -#endif - -#if (CONFIG_PLL_BYPASS == 0) -#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) -#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -/* - * Miscellaneous configurable options - */ -#define CFG_HZ 1000 /* 1ms time tick */ - -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) -#define CFG_GBL_DATA_SIZE 0x4000 -#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) -#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) - -#define CFG_LARGE_IMAGE_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ - -#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ - -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - -/* - * FLASH organization and environment definitions - */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* 0xFF, 0xBBC3BBc3, 0x99B39983 */ -/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) -#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ - B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) -#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ - B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) -*/ -#define AMGCTLVAL 0xFF -#define AMBCTL0VAL 0xBBC3BBC3 -#define AMBCTL1VAL 0x99B39983 -#define CF_AMBCTL1VAL 0x99B3ffc2 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif - -#endif diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 6417ed8..eb4859c 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -45,11 +45,11 @@ #define EXTCLK_50 50000000 #define EXTCLK_83 83333333 -#define CONFIG_IBM_EMAC4_V4 1 -#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS #undef CONFIG_STRESS -#undef ENABLE_ECC + /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) @@ -118,10 +118,9 @@ /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses */ -#define IIC0_DIMM0_ADDR 0x53 -#define IIC0_DIMM1_ADDR 0x52 +#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ +#undef CONFIG_DDR_ECC /* no ECC support for now */ /*----------------------------------------------------------------------- * I2C @@ -211,6 +210,7 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CONFIG_IBM_EMAC4_V4 1 #define CONFIG_MII 1 /* MII PHY management */ #undef CONFIG_NET_MULTI #define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ diff --git a/include/fdt.h b/include/fdt.h new file mode 100644 index 0000000..48ccfd9 --- /dev/null +++ b/include/fdt.h @@ -0,0 +1,60 @@ +#ifndef _FDT_H +#define _FDT_H + +#ifndef __ASSEMBLY__ + +struct fdt_header { + uint32_t magic; /* magic word FDT_MAGIC */ + uint32_t totalsize; /* total size of DT block */ + uint32_t off_dt_struct; /* offset to structure */ + uint32_t off_dt_strings; /* offset to strings */ + uint32_t off_mem_rsvmap; /* offset to memory reserve map */ + uint32_t version; /* format version */ + uint32_t last_comp_version; /* last compatible version */ + + /* version 2 fields below */ + uint32_t boot_cpuid_phys; /* Which physical CPU id we're + booting on */ + /* version 3 fields below */ + uint32_t size_dt_strings; /* size of the strings block */ + + /* version 17 fields below */ + uint32_t size_dt_struct; /* size of the structure block */ +}; + +struct fdt_reserve_entry { + uint64_t address; + uint64_t size; +}; + +struct fdt_node_header { + uint32_t tag; + char name[0]; +}; + +struct fdt_property { + uint32_t tag; + uint32_t len; + uint32_t nameoff; + char data[0]; +}; + +#endif /* !__ASSEMBLY */ + +#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ +#define FDT_TAGSIZE sizeof(uint32_t) + +#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ +#define FDT_END_NODE 0x2 /* End node */ +#define FDT_PROP 0x3 /* Property: name off, + size, content */ +#define FDT_NOP 0x4 /* nop */ +#define FDT_END 0x9 + +#define FDT_V1_SIZE (7*sizeof(uint32_t)) +#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t)) +#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t)) +#define FDT_V16_SIZE FDT_V3_SIZE +#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t)) + +#endif /* _FDT_H */ diff --git a/include/flash.h b/include/flash.h index 55b6d8f..43b9c6b 100644 --- a/include/flash.h +++ b/include/flash.h @@ -252,6 +252,8 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define STM_ID_x800AB 0x005B005B /* M29W800AB ID (8M = 512K x 16 ) */ #define STM_ID_29W320DT 0x22CA22CA /* M29W320DT ID (32 M, top boot sector) */ #define STM_ID_29W320DB 0x22CB22CB /* M29W320DB ID (32 M, bottom boot sect) */ +#define STM_ID_29W320ET 0x22562256 /* M29W320ET ID (32 M, top boot sector) */ +#define STM_ID_29W320EB 0x22572257 /* M29W320EB ID (32 M, bottom boot sect)*/ #define STM_ID_29W040B 0x00E300E3 /* M29W040B ID (4M = 512K x 8) */ #define FLASH_PSD4256GV 0x00E9 /* PSD4256 Flash and CPLD combination */ diff --git a/include/i2c.h b/include/i2c.h index d31c72d..6e6c845 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -63,6 +63,9 @@ #if !defined(CFG_DTT_BUS_NUM) #define CFG_DTT_BUS_NUM 0 #endif +#if !defined(CFG_SPD_BUS_NUM) +#define CFG_SPD_BUS_NUM 0 +#endif /* * Initialization, must be called once on start up, may be called diff --git a/include/libfdt.h b/include/libfdt.h new file mode 100644 index 0000000..a0b4d55 --- /dev/null +++ b/include/libfdt.h @@ -0,0 +1,138 @@ +#ifndef _LIBFDT_H +#define _LIBFDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <fdt.h> +#include <libfdt_env.h> + +#define FDT_FIRST_SUPPORTED_VERSION 0x10 +#define FDT_LAST_SUPPORTED_VERSION 0x11 + +/* Error codes: informative error codes */ +#define FDT_ERR_NOTFOUND 1 +#define FDT_ERR_EXISTS 2 +#define FDT_ERR_NOSPACE 3 + +/* Error codes: codes for bad parameters */ +#define FDT_ERR_BADOFFSET 4 +#define FDT_ERR_BADPATH 5 +#define FDT_ERR_BADSTATE 6 + +/* Error codes: codes for bad device tree blobs */ +#define FDT_ERR_TRUNCATED 7 +#define FDT_ERR_BADMAGIC 8 +#define FDT_ERR_BADVERSION 9 +#define FDT_ERR_BADSTRUCTURE 10 +#define FDT_ERR_BADLAYOUT 11 + +#define FDT_ERR_MAX 11 + +#define fdt_get_header(fdt, field) \ + (fdt32_to_cpu(((struct fdt_header *)(fdt))->field)) +#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) +#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) +#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) +#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) +#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) +#define fdt_version(fdt) (fdt_get_header(fdt, version)) +#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) +#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) +#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) +#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) + +#define fdt_set_header(fdt, field, val) \ + ((struct fdt_header *)(fdt))->field = cpu_to_fdt32(val) + +void *fdt_offset_ptr(const void *fdt, int offset, int checklen); + +#define fdt_offset_ptr_typed(fdt, offset, var) \ + ((typeof(var))(fdt_offset_ptr((fdt), (offset), sizeof(*(var))))) + +int fdt_move(const void *fdt, void *buf, int bufsize); + +/* Read-only functions */ +char *fdt_string(const void *fdt, int stroffset); + +int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, + const char *name, int namelen); +int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); + +int fdt_path_offset(const void *fdt, const char *path); + +struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, + const char *name, int *lenp); +void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp); + +uint32_t fdt_next_tag(const void *fdt, int offset, + int *nextoffset, char **namep); + +/* Write-in-place functions */ +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +#define fdt_setprop_inplace_typed(fdt, nodeoffset, name, val) \ + ({ \ + typeof(val) x = val; \ + fdt_setprop_inplace(fdt, nodeoffset, name, &x, sizeof(x)); \ + }) + +int fdt_nop_property(void *fdt, int nodeoffset, const char *name); +int fdt_nop_node(void *fdt, int nodeoffset); + +/* Sequential-write functions */ +int fdt_create(void *buf, int bufsize); +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); +int fdt_finish_reservemap(void *fdt); +int fdt_begin_node(void *fdt, const char *name); +int fdt_property(void *fdt, const char *name, const void *val, int len); +#define fdt_property_typed(fdt, name, val) \ + ({ \ + typeof(val) x = (val); \ + fdt_property((fdt), (name), &x, sizeof(x)); \ + }) +#define fdt_property_string(fdt, name, str) \ + fdt_property(fdt, name, str, strlen(str)+1) +int fdt_end_node(void *fdt); +int fdt_finish(void *fdt); + +/* Read-write functions */ +int fdt_open_into(void *fdt, void *buf, int bufsize); +int fdt_pack(void *fdt); + +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); +#define fdt_setprop_typed(fdt, nodeoffset, name, val) \ + ({ \ + typeof(val) x = (val); \ + fdt_setprop((fdt), (nodeoffset), (name), &x, sizeof(x)); \ + }) +#define fdt_setprop_string(fdt, nodeoffset, name, str) \ + fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) +int fdt_delprop(void *fdt, int nodeoffset, const char *name); +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen); +int fdt_add_subnode(void *fdt, int parentoffset, const char *name); +int fdt_del_node(void *fdt, int nodeoffset); + +/* Extra functions */ +const char *fdt_strerror(int errval); + +#endif /* _LIBFDT_H */ diff --git a/include/libfdt_env.h b/include/libfdt_env.h new file mode 100644 index 0000000..6c77852 --- /dev/null +++ b/include/libfdt_env.h @@ -0,0 +1,16 @@ +#ifndef _LIBFDT_ENV_H +#define _LIBFDT_ENV_H + +#include <stddef.h> +#include <linux/types.h> +#include <asm/byteorder.h> +#include <linux/string.h> + +struct fdt_header *fdt; /* Pointer to the working fdt */ + +#define fdt32_to_cpu(x) __be32_to_cpu(x) +#define cpu_to_fdt32(x) __cpu_to_be32(x) +#define fdt64_to_cpu(x) __be64_to_cpu(x) +#define cpu_to_fdt64(x) __cpu_to_be64(x) + +#endif /* _LIBFDT_ENV_H */ diff --git a/include/linux/stat.h b/include/linux/stat.h index f9422cb..4d05aa9 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -67,7 +67,7 @@ struct stat { #endif /* __PPC__ */ -#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__blackfin__) +#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__bfin__) struct stat { unsigned short st_dev; diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 03dd0ca..c2a4ff5 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -10,12 +10,6 @@ * the License, or (at your option) any later version. */ -/* - * mpc83xx.h - * - * MPC83xx specific definitions - */ - #ifndef __MPC83XX_H__ #define __MPC83XX_H__ @@ -24,406 +18,1005 @@ #include <asm/e300.h> #endif -/* - * MPC83xx cpu provide RCR register to do reset thing specially. easier - * to implement +/* MPC83xx cpu provide RCR register to do reset thing specially */ - #define MPC83xx_RESET -/* - * System reset offset (PowerPC standard) +/* System reset offset (PowerPC standard) */ -#define EXC_OFF_SYS_RESET 0x0100 +#define EXC_OFF_SYS_RESET 0x0100 -/* - * Default Internal Memory Register Space (Freescale recomandation) +/* IMMRBAR - Internal Memory Register Base Address */ -#define CONFIG_DEFAULT_IMMR 0xFF400000 +#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */ +#define IMMRBAR 0x0000 /* Register offset to immr */ +#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */ +#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR) -/* - * Watchdog +/* LAWBAR - Local Access Window Base Address Register */ -#define SWCRR 0x0204 -#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */ -#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */ -#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit. */ -#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */ -#define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR) +#define LBLAWBAR0 0x0020 /* Register offset to immr */ +#define LBLAWAR0 0x0024 +#define LBLAWBAR1 0x0028 +#define LBLAWAR1 0x002C +#define LBLAWBAR2 0x0030 +#define LBLAWAR2 0x0034 +#define LBLAWBAR3 0x0038 +#define LBLAWAR3 0x003C +#define LAWBAR_BAR 0xFFFFF000 /* Base address mask */ + +/* SPRIDR - System Part and Revision ID Register + */ +#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification */ +#define SPRIDR_REVID 0x0000FFFF /* Revision Identification */ + +#define SPR_8349E_REV10 0x80300100 +#define SPR_8349_REV10 0x80310100 +#define SPR_8347E_REV10_TBGA 0x80320100 +#define SPR_8347_REV10_TBGA 0x80330100 +#define SPR_8347E_REV10_PBGA 0x80340100 +#define SPR_8347_REV10_PBGA 0x80350100 +#define SPR_8343E_REV10 0x80360100 +#define SPR_8343_REV10 0x80370100 + +#define SPR_8349E_REV11 0x80300101 +#define SPR_8349_REV11 0x80310101 +#define SPR_8347E_REV11_TBGA 0x80320101 +#define SPR_8347_REV11_TBGA 0x80330101 +#define SPR_8347E_REV11_PBGA 0x80340101 +#define SPR_8347_REV11_PBGA 0x80350101 +#define SPR_8343E_REV11 0x80360101 +#define SPR_8343_REV11 0x80370101 + +#define SPR_8349E_REV31 0x80300300 +#define SPR_8349_REV31 0x80310300 +#define SPR_8347E_REV31_TBGA 0x80320300 +#define SPR_8347_REV31_TBGA 0x80330300 +#define SPR_8347E_REV31_PBGA 0x80340300 +#define SPR_8347_REV31_PBGA 0x80350300 +#define SPR_8343E_REV31 0x80360300 +#define SPR_8343_REV31 0x80370300 + +#define SPR_8360E_REV10 0x80480010 +#define SPR_8360_REV10 0x80490010 +#define SPR_8360E_REV11 0x80480011 +#define SPR_8360_REV11 0x80490011 +#define SPR_8360E_REV12 0x80480012 +#define SPR_8360_REV12 0x80490012 +#define SPR_8360E_REV20 0x80480020 +#define SPR_8360_REV20 0x80490020 + +#define SPR_8323E_REV10 0x80620010 +#define SPR_8323_REV10 0x80630010 +#define SPR_8321E_REV10 0x80660010 +#define SPR_8321_REV10 0x80670010 +#define SPR_8323E_REV11 0x80620011 +#define SPR_8323_REV11 0x80630011 +#define SPR_8321E_REV11 0x80660011 +#define SPR_8321_REV11 0x80670011 + +/* SPCR - System Priority Configuration Register + */ +#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */ +#define SPCR_PCIHPE_SHIFT (31-3) +#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority */ +#define SPCR_PCIPR_SHIFT (31-7) +#define SPCR_OPT 0x00800000 /* Optimize */ +#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable */ +#define SPCR_TBEN_SHIFT (31-9) +#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority */ +#define SPCR_COREPR_SHIFT (31-11) + +#if defined(CONFIG_MPC834X) +/* SPCR bits - MPC8349 specific */ +#define SPCR_TSEC1DP 0x00003000 /* TSEC1 data priority */ +#define SPCR_TSEC1DP_SHIFT (31-19) +#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority */ +#define SPCR_TSEC1BDP_SHIFT (31-21) +#define SPCR_TSEC1EP 0x00000300 /* TSEC1 emergency priority */ +#define SPCR_TSEC1EP_SHIFT (31-23) +#define SPCR_TSEC2DP 0x00000030 /* TSEC2 data priority */ +#define SPCR_TSEC2DP_SHIFT (31-27) +#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority */ +#define SPCR_TSEC2BDP_SHIFT (31-29) +#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */ +#define SPCR_TSEC2EP_SHIFT (31-31) +#endif -#define SWCNR 0x0208 -#define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field. -#define SWCNR_RES ~(SWCNR_SWCN) +/* SICRL/H - System I/O Configuration Register Low/High + */ +#if defined(CONFIG_MPC834X) +/* SICRL bits - MPC8349 specific */ +#define SICRL_LDP_A 0x80000000 +#define SICRL_USB1 0x40000000 +#define SICRL_USB0 0x20000000 +#define SICRL_UART 0x0C000000 +#define SICRL_GPIO1_A 0x02000000 +#define SICRL_GPIO1_B 0x01000000 +#define SICRL_GPIO1_C 0x00800000 +#define SICRL_GPIO1_D 0x00400000 +#define SICRL_GPIO1_E 0x00200000 +#define SICRL_GPIO1_F 0x00180000 +#define SICRL_GPIO1_G 0x00040000 +#define SICRL_GPIO1_H 0x00020000 +#define SICRL_GPIO1_I 0x00010000 +#define SICRL_GPIO1_J 0x00008000 +#define SICRL_GPIO1_K 0x00004000 +#define SICRL_GPIO1_L 0x00003000 + +/* SICRH bits - MPC8349 specific */ +#define SICRH_DDR 0x80000000 +#define SICRH_TSEC1_A 0x10000000 +#define SICRH_TSEC1_B 0x08000000 +#define SICRH_TSEC1_C 0x04000000 +#define SICRH_TSEC1_D 0x02000000 +#define SICRH_TSEC1_E 0x01000000 +#define SICRH_TSEC1_F 0x00800000 +#define SICRH_TSEC2_A 0x00400000 +#define SICRH_TSEC2_B 0x00200000 +#define SICRH_TSEC2_C 0x00100000 +#define SICRH_TSEC2_D 0x00080000 +#define SICRH_TSEC2_E 0x00040000 +#define SICRH_TSEC2_F 0x00020000 +#define SICRH_TSEC2_G 0x00010000 +#define SICRH_TSEC2_H 0x00008000 +#define SICRH_GPIO2_A 0x00004000 +#define SICRH_GPIO2_B 0x00002000 +#define SICRH_GPIO2_C 0x00001000 +#define SICRH_GPIO2_D 0x00000800 +#define SICRH_GPIO2_E 0x00000400 +#define SICRH_GPIO2_F 0x00000200 +#define SICRH_GPIO2_G 0x00000180 +#define SICRH_GPIO2_H 0x00000060 +#define SICRH_TSOBI1 0x00000002 +#define SICRH_TSOBI2 0x00000001 + +#elif defined(CONFIG_MPC8360) +/* SICRL bits - MPC8360 specific */ +#define SICRL_LDP_A 0xC0000000 +#define SICRL_LCLK_1 0x10000000 +#define SICRL_LCLK_2 0x08000000 +#define SICRL_SRCID_A 0x03000000 +#define SICRL_IRQ_CKSTP_A 0x00C00000 + +/* SICRH bits - MPC8360 specific */ +#define SICRH_DDR 0x80000000 +#define SICRH_SECONDARY_DDR 0x40000000 +#define SICRH_SDDROE 0x20000000 +#define SICRH_IRQ3 0x10000000 +#define SICRH_UC1EOBI 0x00000004 +#define SICRH_UC2E1OBI 0x00000002 +#define SICRH_UC2E2OBI 0x00000001 + +#elif defined(CONFIG_MPC832X) +/* SICRL bits - MPC832X specific */ +#define SICRL_LDP_LCS_A 0x80000000 +#define SICRL_IRQ_CKS 0x20000000 +#define SICRL_PCI_MSRC 0x10000000 +#define SICRL_URT_CTPR 0x06000000 +#define SICRL_IRQ_CTPR 0x00C00000 +#endif -#define SWSRR 0x020E +/* SWCRR - System Watchdog Control Register + */ +#define SWCRR 0x0204 /* Register offset to immr */ +#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count */ +#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit */ +#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit */ +#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit */ +#define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR) + +/* SWCNR - System Watchdog Counter Register + */ +#define SWCNR 0x0208 /* Register offset to immr */ +#define SWCNR_SWCN 0x0000FFFF /* Software Watchdog Count mask */ +#define SWCNR_RES ~(SWCNR_SWCN) -/* - * Default Internal Memory Register Space (Freescale recomandation) +/* SWSRR - System Watchdog Service Register */ -#define IMMRBAR 0x0000 -#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Identifies the 12 most-significant address bits of the base of the 1 MByte internal memory window. */ -#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR) +#define SWSRR 0x020E /* Register offset to immr */ -/* - * Default Internal Memory Register Space (Freescale recomandation) +/* ACR - Arbiter Configuration Register */ -#define LBLAWBAR0 0x0020 -#define LBLAWAR0 0x0024 -#define LBLAWBAR1 0x0028 -#define LBLAWAR1 0x002C -#define LBLAWBAR2 0x0030 -#define LBLAWAR2 0x0034 -#define LBLAWBAR3 0x0038 -#define LBLAWAR3 0x003C +#define ACR_COREDIS 0x10000000 /* Core disable */ +#define ACR_COREDIS_SHIFT (31-7) +#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth */ +#define ACR_PIPE_DEP_SHIFT (31-15) +#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count */ +#define ACR_PCI_RPTCNT_SHIFT (31-19) +#define ACR_RPTCNT 0x00000700 /* Repeat count */ +#define ACR_RPTCNT_SHIFT (31-23) +#define ACR_APARK 0x00000030 /* Address parking */ +#define ACR_APARK_SHIFT (31-27) +#define ACR_PARKM 0x0000000F /* Parking master */ +#define ACR_PARKM_SHIFT (31-31) + +/* ATR - Arbiter Timers Register + */ +#define ATR_DTO 0x00FF0000 /* Data time out */ +#define ATR_ATO 0x000000FF /* Address time out */ -/* - * The device ID and revision numbers - */ -#define SPR_8349E_REV10 0x80300100 -#define SPR_8349_REV10 0x80310100 -#define SPR_8347E_REV10_TBGA 0x80320100 -#define SPR_8347_REV10_TBGA 0x80330100 -#define SPR_8347E_REV10_PBGA 0x80340100 -#define SPR_8347_REV10_PBGA 0x80350100 -#define SPR_8343E_REV10 0x80360100 -#define SPR_8343_REV10 0x80370100 - -#define SPR_8349E_REV11 0x80300101 -#define SPR_8349_REV11 0x80310101 -#define SPR_8347E_REV11_TBGA 0x80320101 -#define SPR_8347_REV11_TBGA 0x80330101 -#define SPR_8347E_REV11_PBGA 0x80340101 -#define SPR_8347_REV11_PBGA 0x80350101 -#define SPR_8343E_REV11 0x80360101 -#define SPR_8343_REV11 0x80370101 - -#define SPR_8360E_REV10 0x80480010 -#define SPR_8360_REV10 0x80490010 -#define SPR_8360E_REV11 0x80480011 -#define SPR_8360_REV11 0x80490011 -#define SPR_8360E_REV12 0x80480012 -#define SPR_8360_REV12 0x80490012 +/* AER - Arbiter Event Register + */ +#define AER_ETEA 0x00000020 /* Transfer error */ +#define AER_RES 0x00000010 /* Reserved transfer type */ +#define AER_ECW 0x00000008 /* External control word transfer type */ +#define AER_AO 0x00000004 /* Address Only transfer type */ +#define AER_DTO 0x00000002 /* Data time out */ +#define AER_ATO 0x00000001 /* Address time out */ + +/* AEATR - Arbiter Event Address Register + */ +#define AEATR_EVENT 0x07000000 /* Event type */ +#define AEATR_MSTR_ID 0x001F0000 /* Master Id */ +#define AEATR_TBST 0x00000800 /* Transfer burst */ +#define AEATR_TSIZE 0x00000700 /* Transfer Size */ +#define AEATR_TTYPE 0x0000001F /* Transfer Type */ -/* - * Base Registers & Option Registers - */ -#define BR0 0x5000 -#define BR1 0x5008 -#define BR2 0x5010 -#define BR3 0x5018 -#define BR4 0x5020 -#define BR5 0x5028 -#define BR6 0x5030 -#define BR7 0x5038 - -#define BR_BA 0xFFFF8000 -#define BR_BA_SHIFT 15 -#define BR_PS 0x00001800 -#define BR_PS_SHIFT 11 -#define BR_PS_8 0x00000800 /* Port Size 8 bit */ -#define BR_PS_16 0x00001000 /* Port Size 16 bit */ -#define BR_PS_32 0x00001800 /* Port Size 32 bit */ -#define BR_DECC 0x00000600 -#define BR_DECC_SHIFT 9 -#define BR_WP 0x00000100 -#define BR_WP_SHIFT 8 -#define BR_MSEL 0x000000E0 -#define BR_MSEL_SHIFT 5 -#define BR_MS_GPCM 0x00000000 /* GPCM */ -#define BR_MS_SDRAM 0x00000060 /* SDRAM */ -#define BR_MS_UPMA 0x00000080 /* UPMA */ -#define BR_MS_UPMB 0x000000A0 /* UPMB */ -#define BR_MS_UPMC 0x000000C0 /* UPMC */ -#if defined (CONFIG_MPC8360) -#define BR_ATOM 0x0000000C -#define BR_ATOM_SHIFT 2 +/* HRCWL - Hard Reset Configuration Word Low + */ +#define HRCWL_LBIUCM 0x80000000 +#define HRCWL_LBIUCM_SHIFT 31 +#define HRCWL_LCL_BUS_TO_SCB_CLK_1X1 0x00000000 +#define HRCWL_LCL_BUS_TO_SCB_CLK_2X1 0x80000000 + +#define HRCWL_DDRCM 0x40000000 +#define HRCWL_DDRCM_SHIFT 30 +#define HRCWL_DDR_TO_SCB_CLK_1X1 0x00000000 +#define HRCWL_DDR_TO_SCB_CLK_2X1 0x40000000 + +#define HRCWL_SPMF 0x0f000000 +#define HRCWL_SPMF_SHIFT 24 +#define HRCWL_CSB_TO_CLKIN_16X1 0x00000000 +#define HRCWL_CSB_TO_CLKIN_1X1 0x01000000 +#define HRCWL_CSB_TO_CLKIN_2X1 0x02000000 +#define HRCWL_CSB_TO_CLKIN_3X1 0x03000000 +#define HRCWL_CSB_TO_CLKIN_4X1 0x04000000 +#define HRCWL_CSB_TO_CLKIN_5X1 0x05000000 +#define HRCWL_CSB_TO_CLKIN_6X1 0x06000000 +#define HRCWL_CSB_TO_CLKIN_7X1 0x07000000 +#define HRCWL_CSB_TO_CLKIN_8X1 0x08000000 +#define HRCWL_CSB_TO_CLKIN_9X1 0x09000000 +#define HRCWL_CSB_TO_CLKIN_10X1 0x0A000000 +#define HRCWL_CSB_TO_CLKIN_11X1 0x0B000000 +#define HRCWL_CSB_TO_CLKIN_12X1 0x0C000000 +#define HRCWL_CSB_TO_CLKIN_13X1 0x0D000000 +#define HRCWL_CSB_TO_CLKIN_14X1 0x0E000000 +#define HRCWL_CSB_TO_CLKIN_15X1 0x0F000000 + +#define HRCWL_VCO_BYPASS 0x00000000 +#define HRCWL_VCO_1X2 0x00000000 +#define HRCWL_VCO_1X4 0x00200000 +#define HRCWL_VCO_1X8 0x00400000 + +#define HRCWL_COREPLL 0x007F0000 +#define HRCWL_COREPLL_SHIFT 16 +#define HRCWL_CORE_TO_CSB_BYPASS 0x00000000 +#define HRCWL_CORE_TO_CSB_1X1 0x00020000 +#define HRCWL_CORE_TO_CSB_1_5X1 0x00030000 +#define HRCWL_CORE_TO_CSB_2X1 0x00040000 +#define HRCWL_CORE_TO_CSB_2_5X1 0x00050000 +#define HRCWL_CORE_TO_CSB_3X1 0x00060000 + +#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) +#define HRCWL_CEVCOD 0x000000C0 +#define HRCWL_CEVCOD_SHIFT 6 +#define HRCWL_CE_PLL_VCO_DIV_4 0x00000000 +#define HRCWL_CE_PLL_VCO_DIV_8 0x00000040 +#define HRCWL_CE_PLL_VCO_DIV_2 0x00000080 + +#define HRCWL_CEPDF 0x00000020 +#define HRCWL_CEPDF_SHIFT 5 +#define HRCWL_CE_PLL_DIV_1X1 0x00000000 +#define HRCWL_CE_PLL_DIV_2X1 0x00000020 + +#define HRCWL_CEPMF 0x0000001F +#define HRCWL_CEPMF_SHIFT 0 +#define HRCWL_CE_TO_PLL_1X16_ 0x00000000 +#define HRCWL_CE_TO_PLL_1X2 0x00000002 +#define HRCWL_CE_TO_PLL_1X3 0x00000003 +#define HRCWL_CE_TO_PLL_1X4 0x00000004 +#define HRCWL_CE_TO_PLL_1X5 0x00000005 +#define HRCWL_CE_TO_PLL_1X6 0x00000006 +#define HRCWL_CE_TO_PLL_1X7 0x00000007 +#define HRCWL_CE_TO_PLL_1X8 0x00000008 +#define HRCWL_CE_TO_PLL_1X9 0x00000009 +#define HRCWL_CE_TO_PLL_1X10 0x0000000A +#define HRCWL_CE_TO_PLL_1X11 0x0000000B +#define HRCWL_CE_TO_PLL_1X12 0x0000000C +#define HRCWL_CE_TO_PLL_1X13 0x0000000D +#define HRCWL_CE_TO_PLL_1X14 0x0000000E +#define HRCWL_CE_TO_PLL_1X15 0x0000000F +#define HRCWL_CE_TO_PLL_1X16 0x00000010 +#define HRCWL_CE_TO_PLL_1X17 0x00000011 +#define HRCWL_CE_TO_PLL_1X18 0x00000012 +#define HRCWL_CE_TO_PLL_1X19 0x00000013 +#define HRCWL_CE_TO_PLL_1X20 0x00000014 +#define HRCWL_CE_TO_PLL_1X21 0x00000015 +#define HRCWL_CE_TO_PLL_1X22 0x00000016 +#define HRCWL_CE_TO_PLL_1X23 0x00000017 +#define HRCWL_CE_TO_PLL_1X24 0x00000018 +#define HRCWL_CE_TO_PLL_1X25 0x00000019 +#define HRCWL_CE_TO_PLL_1X26 0x0000001A +#define HRCWL_CE_TO_PLL_1X27 0x0000001B +#define HRCWL_CE_TO_PLL_1X28 0x0000001C +#define HRCWL_CE_TO_PLL_1X29 0x0000001D +#define HRCWL_CE_TO_PLL_1X30 0x0000001E +#define HRCWL_CE_TO_PLL_1X31 0x0000001F #endif -#define BR_V 0x00000001 -#define BR_V_SHIFT 0 -#if defined (CONFIG_MPC8349) -#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) -#elif defined (CONFIG_MPC8360) -#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_ATOM|BR_V) + +/* HRCWH - Hardware Reset Configuration Word High + */ +#define HRCWH_PCI_HOST 0x80000000 +#define HRCWH_PCI_HOST_SHIFT 31 +#define HRCWH_PCI_AGENT 0x00000000 + +#if defined(CONFIG_MPC834X) +#define HRCWH_32_BIT_PCI 0x00000000 +#define HRCWH_64_BIT_PCI 0x40000000 #endif -#define OR0 0x5004 -#define OR1 0x500C -#define OR2 0x5014 -#define OR3 0x501C -#define OR4 0x5024 -#define OR5 0x502C -#define OR6 0x5034 -#define OR7 0x503C +#define HRCWH_PCI1_ARBITER_DISABLE 0x00000000 +#define HRCWH_PCI1_ARBITER_ENABLE 0x20000000 -#define OR_GPCM_AM 0xFFFF8000 -#define OR_GPCM_AM_SHIFT 15 -#define OR_GPCM_BCTLD 0x00001000 -#define OR_GPCM_BCTLD_SHIFT 12 -#define OR_GPCM_CSNT 0x00000800 -#define OR_GPCM_CSNT_SHIFT 11 -#define OR_GPCM_ACS 0x00000600 -#define OR_GPCM_ACS_SHIFT 9 -#define OR_GPCM_ACS_0b10 0x00000400 -#define OR_GPCM_ACS_0b11 0x00000600 -#define OR_GPCM_XACS 0x00000100 -#define OR_GPCM_XACS_SHIFT 8 -#define OR_GPCM_SCY 0x000000F0 -#define OR_GPCM_SCY_SHIFT 4 -#define OR_GPCM_SCY_1 0x00000010 -#define OR_GPCM_SCY_2 0x00000020 -#define OR_GPCM_SCY_3 0x00000030 -#define OR_GPCM_SCY_4 0x00000040 -#define OR_GPCM_SCY_5 0x00000050 -#define OR_GPCM_SCY_6 0x00000060 -#define OR_GPCM_SCY_7 0x00000070 -#define OR_GPCM_SCY_8 0x00000080 -#define OR_GPCM_SCY_9 0x00000090 -#define OR_GPCM_SCY_10 0x000000a0 -#define OR_GPCM_SCY_11 0x000000b0 -#define OR_GPCM_SCY_12 0x000000c0 -#define OR_GPCM_SCY_13 0x000000d0 -#define OR_GPCM_SCY_14 0x000000e0 -#define OR_GPCM_SCY_15 0x000000f0 -#define OR_GPCM_SETA 0x00000008 -#define OR_GPCM_SETA_SHIFT 3 -#define OR_GPCM_TRLX 0x00000004 -#define OR_GPCM_TRLX_SHIFT 2 -#define OR_GPCM_EHTR 0x00000002 -#define OR_GPCM_EHTR_SHIFT 1 -#define OR_GPCM_EAD 0x00000001 -#define OR_GPCM_EAD_SHIFT 0 - -#define OR_UPM_AM 0xFFFF8000 -#define OR_UPM_AM_SHIFT 15 -#define OR_UPM_XAM 0x00006000 -#define OR_UPM_XAM_SHIFT 13 -#define OR_UPM_BCTLD 0x00001000 -#define OR_UPM_BCTLD_SHIFT 12 -#define OR_UPM_BI 0x00000100 -#define OR_UPM_BI_SHIFT 8 -#define OR_UPM_TRLX 0x00000004 -#define OR_UPM_TRLX_SHIFT 2 -#define OR_UPM_EHTR 0x00000002 -#define OR_UPM_EHTR_SHIFT 1 -#define OR_UPM_EAD 0x00000001 -#define OR_UPM_EAD_SHIFT 0 - -#define OR_SDRAM_AM 0xFFFF8000 -#define OR_SDRAM_AM_SHIFT 15 -#define OR_SDRAM_XAM 0x00006000 -#define OR_SDRAM_XAM_SHIFT 13 -#define OR_SDRAM_COLS 0x00001C00 -#define OR_SDRAM_COLS_SHIFT 10 -#define OR_SDRAM_ROWS 0x000001C0 -#define OR_SDRAM_ROWS_SHIFT 6 -#define OR_SDRAM_PMSEL 0x00000020 -#define OR_SDRAM_PMSEL_SHIFT 5 -#define OR_SDRAM_EAD 0x00000001 -#define OR_SDRAM_EAD_SHIFT 0 +#define HRCWH_PCI_ARBITER_DISABLE 0x00000000 +#define HRCWH_PCI_ARBITER_ENABLE 0x20000000 -/* - * Hard Reset Configration Word - High - */ -#define HRCWH_PCI_AGENT 0x00000000 -#define HRCWH_PCI_HOST 0x80000000 +#if defined(CONFIG_MPC834X) +#define HRCWH_PCI2_ARBITER_DISABLE 0x00000000 +#define HRCWH_PCI2_ARBITER_ENABLE 0x10000000 -#if defined (CONFIG_MPC8349) -#define HRCWH_32_BIT_PCI 0x00000000 -#define HRCWH_64_BIT_PCI 0x40000000 +#elif defined(CONFIG_MPC8360) +#define HRCWH_PCICKDRV_DISABLE 0x00000000 +#define HRCWH_PCICKDRV_ENABLE 0x10000000 #endif -#define HRCWH_PCI1_ARBITER_DISABLE 0x00000000 -#define HRCWH_PCI1_ARBITER_ENABLE 0x20000000 +#define HRCWH_CORE_DISABLE 0x08000000 +#define HRCWH_CORE_ENABLE 0x00000000 + +#define HRCWH_FROM_0X00000100 0x00000000 +#define HRCWH_FROM_0XFFF00100 0x04000000 + +#define HRCWH_BOOTSEQ_DISABLE 0x00000000 +#define HRCWH_BOOTSEQ_NORMAL 0x01000000 +#define HRCWH_BOOTSEQ_EXTENDED 0x02000000 + +#define HRCWH_SW_WATCHDOG_DISABLE 0x00000000 +#define HRCWH_SW_WATCHDOG_ENABLE 0x00800000 -#if defined (CONFIG_MPC8349) -#define HRCWH_PCI2_ARBITER_DISABLE 0x00000000 -#define HRCWH_PCI2_ARBITER_ENABLE 0x10000000 -#elif defined (CONFIG_MPC8360) -#define HRCWH_PCICKDRV_DISABLE 0x00000000 -#define HRCWH_PCICKDRV_ENABLE 0x10000000 +#define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000 +#define HRCWH_ROM_LOC_PCI1 0x00100000 +#if defined(CONFIG_MPC834X) +#define HRCWH_ROM_LOC_PCI2 0x00200000 +#endif +#define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000 +#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 +#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 + +#if defined(CONFIG_MPC834X) +#define HRCWH_TSEC1M_IN_RGMII 0x00000000 +#define HRCWH_TSEC1M_IN_RTBI 0x00004000 +#define HRCWH_TSEC1M_IN_GMII 0x00008000 +#define HRCWH_TSEC1M_IN_TBI 0x0000C000 +#define HRCWH_TSEC2M_IN_RGMII 0x00000000 +#define HRCWH_TSEC2M_IN_RTBI 0x00001000 +#define HRCWH_TSEC2M_IN_GMII 0x00002000 +#define HRCWH_TSEC2M_IN_TBI 0x00003000 +#endif + +#if defined(CONFIG_MPC8360) +#define HRCWH_SECONDARY_DDR_DISABLE 0x00000000 +#define HRCWH_SECONDARY_DDR_ENABLE 0x00000010 #endif -#define HRCWH_CORE_DISABLE 0x08000000 -#define HRCWH_CORE_ENABLE 0x00000000 +#define HRCWH_BIG_ENDIAN 0x00000000 +#define HRCWH_LITTLE_ENDIAN 0x00000008 -#define HRCWH_FROM_0X00000100 0x00000000 -#define HRCWH_FROM_0XFFF00100 0x04000000 +#define HRCWH_LALE_NORMAL 0x00000000 +#define HRCWH_LALE_EARLY 0x00000004 -#define HRCWH_BOOTSEQ_DISABLE 0x00000000 -#define HRCWH_BOOTSEQ_NORMAL 0x01000000 -#define HRCWH_BOOTSEQ_EXTENDED 0x02000000 +#define HRCWH_LDP_SET 0x00000000 +#define HRCWH_LDP_CLEAR 0x00000002 -#define HRCWH_SW_WATCHDOG_DISABLE 0x00000000 -#define HRCWH_SW_WATCHDOG_ENABLE 0x00800000 +/* RSR - Reset Status Register + */ +#define RSR_RSTSRC 0xE0000000 /* Reset source */ +#define RSR_RSTSRC_SHIFT 29 +#define RSR_BSF 0x00010000 /* Boot seq. fail */ +#define RSR_BSF_SHIFT 16 +#define RSR_SWSR 0x00002000 /* software soft reset */ +#define RSR_SWSR_SHIFT 13 +#define RSR_SWHR 0x00001000 /* software hard reset */ +#define RSR_SWHR_SHIFT 12 +#define RSR_JHRS 0x00000200 /* jtag hreset */ +#define RSR_JHRS_SHIFT 9 +#define RSR_JSRS 0x00000100 /* jtag sreset status */ +#define RSR_JSRS_SHIFT 8 +#define RSR_CSHR 0x00000010 /* checkstop reset status */ +#define RSR_CSHR_SHIFT 4 +#define RSR_SWRS 0x00000008 /* software watchdog reset status */ +#define RSR_SWRS_SHIFT 3 +#define RSR_BMRS 0x00000004 /* bus monitop reset status */ +#define RSR_BMRS_SHIFT 2 +#define RSR_SRS 0x00000002 /* soft reset status */ +#define RSR_SRS_SHIFT 1 +#define RSR_HRS 0x00000001 /* hard reset status */ +#define RSR_HRS_SHIFT 0 +#define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR |\ + RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\ + RSR_BMRS | RSR_SRS | RSR_HRS) +/* RMR - Reset Mode Register + */ +#define RMR_CSRE 0x00000001 /* checkstop reset enable */ +#define RMR_CSRE_SHIFT 0 +#define RMR_RES ~(RMR_CSRE) -#define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000 -#define HRCWH_ROM_LOC_PCI1 0x00100000 -#if defined (CONFIG_MPC8349) -#define HRCWH_ROM_LOC_PCI2 0x00200000 +/* RCR - Reset Control Register + */ +#define RCR_SWHR 0x00000002 /* software hard reset */ +#define RCR_SWSR 0x00000001 /* software soft reset */ +#define RCR_RES ~(RCR_SWHR | RCR_SWSR) + +/* RCER - Reset Control Enable Register + */ +#define RCER_CRE 0x00000001 /* software hard reset */ +#define RCER_RES ~(RCER_CRE) + +/* SPMR - System PLL Mode Register + */ +#define SPMR_LBIUCM 0x80000000 +#define SPMR_DDRCM 0x40000000 +#define SPMR_SPMF 0x0F000000 +#define SPMR_CKID 0x00800000 +#define SPMR_CKID_SHIFT 23 +#define SPMR_COREPLL 0x007F0000 +#define SPMR_CEVCOD 0x000000C0 +#define SPMR_CEPDF 0x00000020 +#define SPMR_CEPMF 0x0000001F + +/* OCCR - Output Clock Control Register + */ +#define OCCR_PCICOE0 0x80000000 +#define OCCR_PCICOE1 0x40000000 +#define OCCR_PCICOE2 0x20000000 +#define OCCR_PCICOE3 0x10000000 +#define OCCR_PCICOE4 0x08000000 +#define OCCR_PCICOE5 0x04000000 +#define OCCR_PCICOE6 0x02000000 +#define OCCR_PCICOE7 0x01000000 +#define OCCR_PCICD0 0x00800000 +#define OCCR_PCICD1 0x00400000 +#define OCCR_PCICD2 0x00200000 +#define OCCR_PCICD3 0x00100000 +#define OCCR_PCICD4 0x00080000 +#define OCCR_PCICD5 0x00040000 +#define OCCR_PCICD6 0x00020000 +#define OCCR_PCICD7 0x00010000 +#define OCCR_PCI1CR 0x00000002 +#define OCCR_PCI2CR 0x00000001 +#define OCCR_PCICR OCCR_PCI1CR + +/* SCCR - System Clock Control Register + */ +#define SCCR_ENCCM 0x03000000 +#define SCCR_ENCCM_SHIFT 24 +#define SCCR_ENCCM_0 0x00000000 +#define SCCR_ENCCM_1 0x01000000 +#define SCCR_ENCCM_2 0x02000000 +#define SCCR_ENCCM_3 0x03000000 + +#define SCCR_PCICM 0x00010000 +#define SCCR_PCICM_SHIFT 16 + +/* SCCR bits - MPC8349 specific */ +#ifdef CONFIG_MPC834X +#define SCCR_TSEC1CM 0xc0000000 +#define SCCR_TSEC1CM_SHIFT 30 +#define SCCR_TSEC1CM_0 0x00000000 +#define SCCR_TSEC1CM_1 0x40000000 +#define SCCR_TSEC1CM_2 0x80000000 +#define SCCR_TSEC1CM_3 0xC0000000 + +#define SCCR_TSEC2CM 0x30000000 +#define SCCR_TSEC2CM_SHIFT 28 +#define SCCR_TSEC2CM_0 0x00000000 +#define SCCR_TSEC2CM_1 0x10000000 +#define SCCR_TSEC2CM_2 0x20000000 +#define SCCR_TSEC2CM_3 0x30000000 #endif -#define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000 -#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 -#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 - -#if defined (CONFIG_MPC8349) -#define HRCWH_TSEC1M_IN_RGMII 0x00000000 -#define HRCWH_TSEC1M_IN_RTBI 0x00004000 -#define HRCWH_TSEC1M_IN_GMII 0x00008000 -#define HRCWH_TSEC1M_IN_TBI 0x0000C000 - -#define HRCWH_TSEC2M_IN_RGMII 0x00000000 -#define HRCWH_TSEC2M_IN_RTBI 0x00001000 -#define HRCWH_TSEC2M_IN_GMII 0x00002000 -#define HRCWH_TSEC2M_IN_TBI 0x00003000 + +#define SCCR_USBMPHCM 0x00c00000 +#define SCCR_USBMPHCM_SHIFT 22 +#define SCCR_USBDRCM 0x00300000 +#define SCCR_USBDRCM_SHIFT 20 + +#define SCCR_USBCM_0 0x00000000 +#define SCCR_USBCM_1 0x00500000 +#define SCCR_USBCM_2 0x00A00000 +#define SCCR_USBCM_3 0x00F00000 + +/* CSn_BDNS - Chip Select memory Bounds Register + */ +#define CSBNDS_SA 0x00FF0000 +#define CSBNDS_SA_SHIFT 8 +#define CSBNDS_EA 0x000000FF +#define CSBNDS_EA_SHIFT 24 + +/* CSn_CONFIG - Chip Select Configuration Register + */ +#define CSCONFIG_EN 0x80000000 +#define CSCONFIG_AP 0x00800000 +#define CSCONFIG_ROW_BIT 0x00000700 +#define CSCONFIG_ROW_BIT_12 0x00000000 +#define CSCONFIG_ROW_BIT_13 0x00000100 +#define CSCONFIG_ROW_BIT_14 0x00000200 +#define CSCONFIG_COL_BIT 0x00000007 +#define CSCONFIG_COL_BIT_8 0x00000000 +#define CSCONFIG_COL_BIT_9 0x00000001 +#define CSCONFIG_COL_BIT_10 0x00000002 +#define CSCONFIG_COL_BIT_11 0x00000003 + +/* TIMING_CFG_1 - DDR SDRAM Timing Configuration 1 + */ +#define TIMING_CFG1_PRETOACT 0x70000000 +#define TIMING_CFG1_PRETOACT_SHIFT 28 +#define TIMING_CFG1_ACTTOPRE 0x0F000000 +#define TIMING_CFG1_ACTTOPRE_SHIFT 24 +#define TIMING_CFG1_ACTTORW 0x00700000 +#define TIMING_CFG1_ACTTORW_SHIFT 20 +#define TIMING_CFG1_CASLAT 0x00070000 +#define TIMING_CFG1_CASLAT_SHIFT 16 +#define TIMING_CFG1_REFREC 0x0000F000 +#define TIMING_CFG1_REFREC_SHIFT 12 +#define TIMING_CFG1_WRREC 0x00000700 +#define TIMING_CFG1_WRREC_SHIFT 8 +#define TIMING_CFG1_ACTTOACT 0x00000070 +#define TIMING_CFG1_ACTTOACT_SHIFT 4 +#define TIMING_CFG1_WRTORD 0x00000007 +#define TIMING_CFG1_WRTORD_SHIFT 0 +#define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */ +#define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ + +/* TIMING_CFG_2 - DDR SDRAM Timing Configuration 2 + */ +#define TIMING_CFG2_CPO 0x0F800000 +#define TIMING_CFG2_CPO_SHIFT 23 +#define TIMING_CFG2_ACSM 0x00080000 +#define TIMING_CFG2_WR_DATA_DELAY 0x00001C00 +#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10 +#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ + +/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration + */ +#define SDRAM_CFG_MEM_EN 0x80000000 +#define SDRAM_CFG_SREN 0x40000000 +#define SDRAM_CFG_ECC_EN 0x20000000 +#define SDRAM_CFG_RD_EN 0x10000000 +#define SDRAM_CFG_SDRAM_TYPE 0x03000000 +#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 +#define SDRAM_CFG_DYN_PWR 0x00200000 +#define SDRAM_CFG_32_BE 0x00080000 +#define SDRAM_CFG_8_BE 0x00040000 +#define SDRAM_CFG_NCAP 0x00020000 +#define SDRAM_CFG_2T_EN 0x00008000 +#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 + +/* DDR_SDRAM_MODE - DDR SDRAM Mode Register + */ +#define SDRAM_MODE_ESD 0xFFFF0000 +#define SDRAM_MODE_ESD_SHIFT 16 +#define SDRAM_MODE_SD 0x0000FFFF +#define SDRAM_MODE_SD_SHIFT 0 +#define DDR_MODE_EXT_MODEREG 0x4000 /* select extended mode reg */ +#define DDR_MODE_EXT_OPMODE 0x3FF8 /* operating mode, mask */ +#define DDR_MODE_EXT_OP_NORMAL 0x0000 /* normal operation */ +#define DDR_MODE_QFC 0x0004 /* QFC / compatibility, mask */ +#define DDR_MODE_QFC_COMP 0x0000 /* compatible to older SDRAMs */ +#define DDR_MODE_WEAK 0x0002 /* weak drivers */ +#define DDR_MODE_DLL_DIS 0x0001 /* disable DLL */ +#define DDR_MODE_CASLAT 0x0070 /* CAS latency, mask */ +#define DDR_MODE_CASLAT_15 0x0010 /* CAS latency 1.5 */ +#define DDR_MODE_CASLAT_20 0x0020 /* CAS latency 2 */ +#define DDR_MODE_CASLAT_25 0x0060 /* CAS latency 2.5 */ +#define DDR_MODE_CASLAT_30 0x0030 /* CAS latency 3 */ +#define DDR_MODE_BTYPE_SEQ 0x0000 /* sequential burst */ +#define DDR_MODE_BTYPE_ILVD 0x0008 /* interleaved burst */ +#define DDR_MODE_BLEN_2 0x0001 /* burst length 2 */ +#define DDR_MODE_BLEN_4 0x0002 /* burst length 4 */ +#define DDR_REFINT_166MHZ_7US 1302 /* exact value for 7.8125us */ +#define DDR_BSTOPRE 256 /* use 256 cycles as a starting point */ +#define DDR_MODE_MODEREG 0x0000 /* select mode register */ + +/* DDR_SDRAM_INTERVAL - DDR SDRAM Interval Register + */ +#define SDRAM_INTERVAL_REFINT 0x3FFF0000 +#define SDRAM_INTERVAL_REFINT_SHIFT 16 +#define SDRAM_INTERVAL_BSTOPRE 0x00003FFF +#define SDRAM_INTERVAL_BSTOPRE_SHIFT 0 + +/* DDR_SDRAM_CLK_CNTL - DDR SDRAM Clock Control Register + */ +#define DDR_SDRAM_CLK_CNTL_SS_EN 0x80000000 +#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025 0x01000000 +#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 0x02000000 +#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075 0x03000000 +#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_1 0x04000000 + +/* ECC_ERR_INJECT - Memory data path error injection mask ECC + */ +#define ECC_ERR_INJECT_EMB (0x80000000>>22) /* ECC Mirror Byte */ +#define ECC_ERR_INJECT_EIEN (0x80000000>>23) /* Error Injection Enable */ +#define ECC_ERR_INJECT_EEIM (0xff000000>>24) /* ECC Erroe Injection Enable */ +#define ECC_ERR_INJECT_EEIM_SHIFT 0 + +/* CAPTURE_ECC - Memory data path read capture ECC + */ +#define CAPTURE_ECC_ECE (0xff000000>>24) +#define CAPTURE_ECC_ECE_SHIFT 0 + +/* ERR_DETECT - Memory error detect + */ +#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ +#define ECC_ERROR_DETECT_MBE (0x80000000>>28) /* Multiple-Bit Error */ +#define ECC_ERROR_DETECT_SBE (0x80000000>>29) /* Single-Bit ECC Error Pickup */ +#define ECC_ERROR_DETECT_MSE (0x80000000>>31) /* Memory Select Error */ + +/* ERR_DISABLE - Memory error disable + */ +#define ECC_ERROR_DISABLE_MBED (0x80000000>>28) /* Multiple-Bit ECC Error Disable */ +#define ECC_ERROR_DISABLE_SBED (0x80000000>>29) /* Sinle-Bit ECC Error disable */ +#define ECC_ERROR_DISABLE_MSED (0x80000000>>31) /* Memory Select Error Disable */ +#define ECC_ERROR_ENABLE ~(ECC_ERROR_DISABLE_MSED | ECC_ERROR_DISABLE_SBED |\ + ECC_ERROR_DISABLE_MBED) +/* ERR_INT_EN - Memory error interrupt enable + */ +#define ECC_ERR_INT_EN_MBEE (0x80000000>>28) /* Multiple-Bit ECC Error Interrupt Enable */ +#define ECC_ERR_INT_EN_SBEE (0x80000000>>29) /* Single-Bit ECC Error Interrupt Enable */ +#define ECC_ERR_INT_EN_MSEE (0x80000000>>31) /* Memory Select Error Interrupt Enable */ +#define ECC_ERR_INT_DISABLE ~(ECC_ERR_INT_EN_MBEE | ECC_ERR_INT_EN_SBEE |\ + ECC_ERR_INT_EN_MSEE) +/* CAPTURE_ATTRIBUTES - Memory error attributes capture + */ +#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ +#define ECC_CAPT_ATTR_BNUM_SHIFT 28 +#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ +#define ECC_CAPT_ATTR_TSIZ_FOUR_DW 0 +#define ECC_CAPT_ATTR_TSIZ_ONE_DW 1 +#define ECC_CAPT_ATTR_TSIZ_TWO_DW 2 +#define ECC_CAPT_ATTR_TSIZ_THREE_DW 3 +#define ECC_CAPT_ATTR_TSIZ_SHIFT 24 +#define ECC_CAPT_ATTR_TSRC (0xf8000000>>11) /* Transaction Source */ +#define ECC_CAPT_ATTR_TSRC_E300_CORE_DT 0x0 +#define ECC_CAPT_ATTR_TSRC_E300_CORE_IF 0x2 +#define ECC_CAPT_ATTR_TSRC_TSEC1 0x4 +#define ECC_CAPT_ATTR_TSRC_TSEC2 0x5 +#define ECC_CAPT_ATTR_TSRC_USB (0x06|0x07) +#define ECC_CAPT_ATTR_TSRC_ENCRYPT 0x8 +#define ECC_CAPT_ATTR_TSRC_I2C 0x9 +#define ECC_CAPT_ATTR_TSRC_JTAG 0xA +#define ECC_CAPT_ATTR_TSRC_PCI1 0xD +#define ECC_CAPT_ATTR_TSRC_PCI2 0xE +#define ECC_CAPT_ATTR_TSRC_DMA 0xF +#define ECC_CAPT_ATTR_TSRC_SHIFT 16 +#define ECC_CAPT_ATTR_TTYP (0xe0000000>>18) /* Transaction Type */ +#define ECC_CAPT_ATTR_TTYP_WRITE 0x1 +#define ECC_CAPT_ATTR_TTYP_READ 0x2 +#define ECC_CAPT_ATTR_TTYP_R_M_W 0x3 +#define ECC_CAPT_ATTR_TTYP_SHIFT 12 +#define ECC_CAPT_ATTR_VLD (0x80000000>>31) /* Valid */ + +/* ERR_SBE - Single bit ECC memory error management + */ +#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255 */ +#define ECC_ERROR_MAN_SBET_SHIFT 16 +#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */ +#define ECC_ERROR_MAN_SBEC_SHIFT 0 + +/* BR - Base Registers + */ +#define BR0 0x5000 /* Register offset to immr */ +#define BR1 0x5008 +#define BR2 0x5010 +#define BR3 0x5018 +#define BR4 0x5020 +#define BR5 0x5028 +#define BR6 0x5030 +#define BR7 0x5038 + +#define BR_BA 0xFFFF8000 +#define BR_BA_SHIFT 15 +#define BR_PS 0x00001800 +#define BR_PS_SHIFT 11 +#define BR_PS_8 0x00000800 /* Port Size 8 bit */ +#define BR_PS_16 0x00001000 /* Port Size 16 bit */ +#define BR_PS_32 0x00001800 /* Port Size 32 bit */ +#define BR_DECC 0x00000600 +#define BR_DECC_SHIFT 9 +#define BR_WP 0x00000100 +#define BR_WP_SHIFT 8 +#define BR_MSEL 0x000000E0 +#define BR_MSEL_SHIFT 5 +#define BR_MS_GPCM 0x00000000 /* GPCM */ +#define BR_MS_SDRAM 0x00000060 /* SDRAM */ +#define BR_MS_UPMA 0x00000080 /* UPMA */ +#define BR_MS_UPMB 0x000000A0 /* UPMB */ +#define BR_MS_UPMC 0x000000C0 /* UPMC */ +#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) +#define BR_ATOM 0x0000000C +#define BR_ATOM_SHIFT 2 #endif +#define BR_V 0x00000001 +#define BR_V_SHIFT 0 -#if defined (CONFIG_MPC8360) -#define HRCWH_SECONDARY_DDR_DISABLE 0x00000000 -#define HRCWH_SECONDARY_DDR_ENABLE 0x00000010 +#if defined(CONFIG_MPC834X) +#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V) +#elif defined(CONFIG_MPC8360) +#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V) #endif -#define HRCWH_BIG_ENDIAN 0x00000000 -#define HRCWH_LITTLE_ENDIAN 0x00000008 +/* OR - Option Registers + */ +#define OR0 0x5004 /* Register offset to immr */ +#define OR1 0x500C +#define OR2 0x5014 +#define OR3 0x501C +#define OR4 0x5024 +#define OR5 0x502C +#define OR6 0x5034 +#define OR7 0x503C + +#define OR_GPCM_AM 0xFFFF8000 +#define OR_GPCM_AM_SHIFT 15 +#define OR_GPCM_BCTLD 0x00001000 +#define OR_GPCM_BCTLD_SHIFT 12 +#define OR_GPCM_CSNT 0x00000800 +#define OR_GPCM_CSNT_SHIFT 11 +#define OR_GPCM_ACS 0x00000600 +#define OR_GPCM_ACS_SHIFT 9 +#define OR_GPCM_ACS_0b10 0x00000400 +#define OR_GPCM_ACS_0b11 0x00000600 +#define OR_GPCM_XACS 0x00000100 +#define OR_GPCM_XACS_SHIFT 8 +#define OR_GPCM_SCY 0x000000F0 +#define OR_GPCM_SCY_SHIFT 4 +#define OR_GPCM_SCY_1 0x00000010 +#define OR_GPCM_SCY_2 0x00000020 +#define OR_GPCM_SCY_3 0x00000030 +#define OR_GPCM_SCY_4 0x00000040 +#define OR_GPCM_SCY_5 0x00000050 +#define OR_GPCM_SCY_6 0x00000060 +#define OR_GPCM_SCY_7 0x00000070 +#define OR_GPCM_SCY_8 0x00000080 +#define OR_GPCM_SCY_9 0x00000090 +#define OR_GPCM_SCY_10 0x000000a0 +#define OR_GPCM_SCY_11 0x000000b0 +#define OR_GPCM_SCY_12 0x000000c0 +#define OR_GPCM_SCY_13 0x000000d0 +#define OR_GPCM_SCY_14 0x000000e0 +#define OR_GPCM_SCY_15 0x000000f0 +#define OR_GPCM_SETA 0x00000008 +#define OR_GPCM_SETA_SHIFT 3 +#define OR_GPCM_TRLX 0x00000004 +#define OR_GPCM_TRLX_SHIFT 2 +#define OR_GPCM_EHTR 0x00000002 +#define OR_GPCM_EHTR_SHIFT 1 +#define OR_GPCM_EAD 0x00000001 +#define OR_GPCM_EAD_SHIFT 0 + +#define OR_UPM_AM 0xFFFF8000 +#define OR_UPM_AM_SHIFT 15 +#define OR_UPM_XAM 0x00006000 +#define OR_UPM_XAM_SHIFT 13 +#define OR_UPM_BCTLD 0x00001000 +#define OR_UPM_BCTLD_SHIFT 12 +#define OR_UPM_BI 0x00000100 +#define OR_UPM_BI_SHIFT 8 +#define OR_UPM_TRLX 0x00000004 +#define OR_UPM_TRLX_SHIFT 2 +#define OR_UPM_EHTR 0x00000002 +#define OR_UPM_EHTR_SHIFT 1 +#define OR_UPM_EAD 0x00000001 +#define OR_UPM_EAD_SHIFT 0 + +#define OR_SDRAM_AM 0xFFFF8000 +#define OR_SDRAM_AM_SHIFT 15 +#define OR_SDRAM_XAM 0x00006000 +#define OR_SDRAM_XAM_SHIFT 13 +#define OR_SDRAM_COLS 0x00001C00 +#define OR_SDRAM_COLS_SHIFT 10 +#define OR_SDRAM_ROWS 0x000001C0 +#define OR_SDRAM_ROWS_SHIFT 6 +#define OR_SDRAM_PMSEL 0x00000020 +#define OR_SDRAM_PMSEL_SHIFT 5 +#define OR_SDRAM_EAD 0x00000001 +#define OR_SDRAM_EAD_SHIFT 0 + +#define OR_AM_32KB 0xFFFF8000 +#define OR_AM_64KB 0xFFFF0000 +#define OR_AM_128KB 0xFFFE0000 +#define OR_AM_256KB 0xFFFC0000 +#define OR_AM_512KB 0xFFF80000 +#define OR_AM_1MB 0xFFF00000 +#define OR_AM_2MB 0xFFE00000 +#define OR_AM_4MB 0xFFC00000 +#define OR_AM_8MB 0xFF800000 +#define OR_AM_16MB 0xFF000000 +#define OR_AM_32MB 0xFE000000 +#define OR_AM_64MB 0xFC000000 +#define OR_AM_128MB 0xF8000000 +#define OR_AM_256MB 0xF0000000 +#define OR_AM_512MB 0xE0000000 +#define OR_AM_1GB 0xC0000000 +#define OR_AM_2GB 0x80000000 +#define OR_AM_4GB 0x00000000 + +#define LBLAWAR_EN 0x80000000 +#define LBLAWAR_4KB 0x0000000B +#define LBLAWAR_8KB 0x0000000C +#define LBLAWAR_16KB 0x0000000D +#define LBLAWAR_32KB 0x0000000E +#define LBLAWAR_64KB 0x0000000F +#define LBLAWAR_128KB 0x00000010 +#define LBLAWAR_256KB 0x00000011 +#define LBLAWAR_512KB 0x00000012 +#define LBLAWAR_1MB 0x00000013 +#define LBLAWAR_2MB 0x00000014 +#define LBLAWAR_4MB 0x00000015 +#define LBLAWAR_8MB 0x00000016 +#define LBLAWAR_16MB 0x00000017 +#define LBLAWAR_32MB 0x00000018 +#define LBLAWAR_64MB 0x00000019 +#define LBLAWAR_128MB 0x0000001A +#define LBLAWAR_256MB 0x0000001B +#define LBLAWAR_512MB 0x0000001C +#define LBLAWAR_1GB 0x0000001D +#define LBLAWAR_2GB 0x0000001E + +/* LBCR - Local Bus Configuration Register + */ +#define LBCR_LDIS 0x80000000 +#define LBCR_LDIS_SHIFT 31 +#define LBCR_BCTLC 0x00C00000 +#define LBCR_BCTLC_SHIFT 22 +#define LBCR_LPBSE 0x00020000 +#define LBCR_LPBSE_SHIFT 17 +#define LBCR_EPAR 0x00010000 +#define LBCR_EPAR_SHIFT 16 +#define LBCR_BMT 0x0000FF00 +#define LBCR_BMT_SHIFT 8 + +/* LCRR - Clock Ratio Register + */ +#define LCRR_DBYP 0x80000000 +#define LCRR_DBYP_SHIFT 31 +#define LCRR_BUFCMDC 0x30000000 +#define LCRR_BUFCMDC_SHIFT 28 +#define LCRR_BUFCMDC_1 0x10000000 +#define LCRR_BUFCMDC_2 0x20000000 +#define LCRR_BUFCMDC_3 0x30000000 +#define LCRR_BUFCMDC_4 0x00000000 +#define LCRR_ECL 0x03000000 +#define LCRR_ECL_SHIFT 24 +#define LCRR_ECL_4 0x00000000 +#define LCRR_ECL_5 0x01000000 +#define LCRR_ECL_6 0x02000000 +#define LCRR_ECL_7 0x03000000 +#define LCRR_EADC 0x00030000 +#define LCRR_EADC_SHIFT 16 +#define LCRR_EADC_1 0x00010000 +#define LCRR_EADC_2 0x00020000 +#define LCRR_EADC_3 0x00030000 +#define LCRR_EADC_4 0x00000000 +#define LCRR_CLKDIV 0x0000000F +#define LCRR_CLKDIV_SHIFT 0 +#define LCRR_CLKDIV_2 0x00000002 +#define LCRR_CLKDIV_4 0x00000004 +#define LCRR_CLKDIV_8 0x00000008 + +/* DMAMR - DMA Mode Register + */ +#define DMA_CHANNEL_START 0x00000001 /* Bit - DMAMRn CS */ +#define DMA_CHANNEL_TRANSFER_MODE_DIRECT 0x00000004 /* Bit - DMAMRn CTM */ +#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN 0x00001000 /* Bit - DMAMRn SAHE */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B 0x00000000 /* 2Bit- DMAMRn SAHTS 1byte */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B 0x00004000 /* 2Bit- DMAMRn SAHTS 2bytes */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B 0x00008000 /* 2Bit- DMAMRn SAHTS 4bytes */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B 0x0000c000 /* 2Bit- DMAMRn SAHTS 8bytes */ +#define DMA_CHANNEL_SNOOP 0x00010000 /* Bit - DMAMRn DMSEN */ + +/* DMASR - DMA Status Register + */ +#define DMA_CHANNEL_BUSY 0x00000004 /* Bit - DMASRn CB */ +#define DMA_CHANNEL_TRANSFER_ERROR 0x00000080 /* Bit - DMASRn TE */ -#define HRCWH_LALE_NORMAL 0x00000000 -#define HRCWH_LALE_EARLY 0x00000004 +/* CONFIG_ADDRESS - PCI Config Address Register + */ +#define PCI_CONFIG_ADDRESS_EN 0x80000000 +#define PCI_CONFIG_ADDRESS_BN_SHIFT 16 +#define PCI_CONFIG_ADDRESS_BN_MASK 0x00ff0000 +#define PCI_CONFIG_ADDRESS_DN_SHIFT 11 +#define PCI_CONFIG_ADDRESS_DN_MASK 0x0000f800 +#define PCI_CONFIG_ADDRESS_FN_SHIFT 8 +#define PCI_CONFIG_ADDRESS_FN_MASK 0x00000700 +#define PCI_CONFIG_ADDRESS_RN_SHIFT 0 +#define PCI_CONFIG_ADDRESS_RN_MASK 0x000000fc + +/* POTAR - PCI Outbound Translation Address Register + */ +#define POTAR_TA_MASK 0x000fffff -#define HRCWH_LDP_SET 0x00000000 -#define HRCWH_LDP_CLEAR 0x00000002 +/* POBAR - PCI Outbound Base Address Register + */ +#define POBAR_BA_MASK 0x000fffff -/* - * Hard Reset Configration Word - Low - */ -#define HRCWL_LCL_BUS_TO_SCB_CLK_1X1 0x00000000 -#define HRCWL_LCL_BUS_TO_SCB_CLK_2X1 0x80000000 - -#define HRCWL_DDR_TO_SCB_CLK_1X1 0x00000000 -#define HRCWL_DDR_TO_SCB_CLK_2X1 0x40000000 - -#define HRCWL_CSB_TO_CLKIN_16X1 0x00000000 -#define HRCWL_CSB_TO_CLKIN_1X1 0x01000000 -#define HRCWL_CSB_TO_CLKIN_2X1 0x02000000 -#define HRCWL_CSB_TO_CLKIN_3X1 0x03000000 -#define HRCWL_CSB_TO_CLKIN_4X1 0x04000000 -#define HRCWL_CSB_TO_CLKIN_5X1 0x05000000 -#define HRCWL_CSB_TO_CLKIN_6X1 0x06000000 -#define HRCWL_CSB_TO_CLKIN_7X1 0x07000000 -#define HRCWL_CSB_TO_CLKIN_8X1 0x08000000 -#define HRCWL_CSB_TO_CLKIN_9X1 0x09000000 -#define HRCWL_CSB_TO_CLKIN_10X1 0x0A000000 -#define HRCWL_CSB_TO_CLKIN_11X1 0x0B000000 -#define HRCWL_CSB_TO_CLKIN_12X1 0x0C000000 -#define HRCWL_CSB_TO_CLKIN_13X1 0x0D000000 -#define HRCWL_CSB_TO_CLKIN_14X1 0x0E000000 -#define HRCWL_CSB_TO_CLKIN_15X1 0x0F000000 - -#define HRCWL_VCO_BYPASS 0x00000000 -#define HRCWL_VCO_1X2 0x00000000 -#define HRCWL_VCO_1X4 0x00200000 -#define HRCWL_VCO_1X8 0x00400000 - -#define HRCWL_CORE_TO_CSB_BYPASS 0x00000000 -#define HRCWL_CORE_TO_CSB_1X1 0x00020000 -#define HRCWL_CORE_TO_CSB_1_5X1 0x00030000 -#define HRCWL_CORE_TO_CSB_2X1 0x00040000 -#define HRCWL_CORE_TO_CSB_2_5X1 0x00050000 -#define HRCWL_CORE_TO_CSB_3X1 0x00060000 - -#if defined (CONFIG_MPC8360) -#define HRCWL_CE_PLL_VCO_DIV_4 0x00000000 -#define HRCWL_CE_PLL_VCO_DIV_8 0x00000040 -#define HRCWL_CE_PLL_VCO_DIV_2 0x00000080 - -#define HRCWL_CE_PLL_DIV_1X1 0x00000000 -#define HRCWL_CE_PLL_DIV_2X1 0x00000020 - -#define HRCWL_CE_TO_PLL_1X16_ 0x00000000 -#define HRCWL_CE_TO_PLL_1X2 0x00000002 -#define HRCWL_CE_TO_PLL_1X3 0x00000003 -#define HRCWL_CE_TO_PLL_1X4 0x00000004 -#define HRCWL_CE_TO_PLL_1X5 0x00000005 -#define HRCWL_CE_TO_PLL_1X6 0x00000006 -#define HRCWL_CE_TO_PLL_1X7 0x00000007 -#define HRCWL_CE_TO_PLL_1X8 0x00000008 -#define HRCWL_CE_TO_PLL_1X9 0x00000009 -#define HRCWL_CE_TO_PLL_1X10 0x0000000A -#define HRCWL_CE_TO_PLL_1X11 0x0000000B -#define HRCWL_CE_TO_PLL_1X12 0x0000000C -#define HRCWL_CE_TO_PLL_1X13 0x0000000D -#define HRCWL_CE_TO_PLL_1X14 0x0000000E -#define HRCWL_CE_TO_PLL_1X15 0x0000000F -#define HRCWL_CE_TO_PLL_1X16 0x00000010 -#define HRCWL_CE_TO_PLL_1X17 0x00000011 -#define HRCWL_CE_TO_PLL_1X18 0x00000012 -#define HRCWL_CE_TO_PLL_1X19 0x00000013 -#define HRCWL_CE_TO_PLL_1X20 0x00000014 -#define HRCWL_CE_TO_PLL_1X21 0x00000015 -#define HRCWL_CE_TO_PLL_1X22 0x00000016 -#define HRCWL_CE_TO_PLL_1X23 0x00000017 -#define HRCWL_CE_TO_PLL_1X24 0x00000018 -#define HRCWL_CE_TO_PLL_1X25 0x00000019 -#define HRCWL_CE_TO_PLL_1X26 0x0000001A -#define HRCWL_CE_TO_PLL_1X27 0x0000001B -#define HRCWL_CE_TO_PLL_1X28 0x0000001C -#define HRCWL_CE_TO_PLL_1X29 0x0000001D -#define HRCWL_CE_TO_PLL_1X30 0x0000001E -#define HRCWL_CE_TO_PLL_1X31 0x0000001F -#endif +/* POCMR - PCI Outbound Comparision Mask Register + */ +#define POCMR_EN 0x80000000 +#define POCMR_IO 0x40000000 /* 0-memory space 1-I/O space */ +#define POCMR_SE 0x20000000 /* streaming enable */ +#define POCMR_DST 0x10000000 /* 0-PCI1 1-PCI2 */ +#define POCMR_CM_MASK 0x000fffff +#define POCMR_CM_4G 0x00000000 +#define POCMR_CM_2G 0x00080000 +#define POCMR_CM_1G 0x000C0000 +#define POCMR_CM_512M 0x000E0000 +#define POCMR_CM_256M 0x000F0000 +#define POCMR_CM_128M 0x000F8000 +#define POCMR_CM_64M 0x000FC000 +#define POCMR_CM_32M 0x000FE000 +#define POCMR_CM_16M 0x000FF000 +#define POCMR_CM_8M 0x000FF800 +#define POCMR_CM_4M 0x000FFC00 +#define POCMR_CM_2M 0x000FFE00 +#define POCMR_CM_1M 0x000FFF00 +#define POCMR_CM_512K 0x000FFF80 +#define POCMR_CM_256K 0x000FFFC0 +#define POCMR_CM_128K 0x000FFFE0 +#define POCMR_CM_64K 0x000FFFF0 +#define POCMR_CM_32K 0x000FFFF8 +#define POCMR_CM_16K 0x000FFFFC +#define POCMR_CM_8K 0x000FFFFE +#define POCMR_CM_4K 0x000FFFFF + +/* PITAR - PCI Inbound Translation Address Register + */ +#define PITAR_TA_MASK 0x000fffff -/* - * LCRR - Clock Ratio Register (10.3.1.16) - */ -#define LCRR_DBYP 0x80000000 -#define LCRR_DBYP_SHIFT 31 -#define LCRR_BUFCMDC 0x30000000 -#define LCRR_BUFCMDC_1 0x10000000 -#define LCRR_BUFCMDC_2 0x20000000 -#define LCRR_BUFCMDC_3 0x30000000 -#define LCRR_BUFCMDC_4 0x00000000 -#define LCRR_BUFCMDC_SHIFT 28 -#define LCRR_ECL 0x03000000 -#define LCRR_ECL_4 0x00000000 -#define LCRR_ECL_5 0x01000000 -#define LCRR_ECL_6 0x02000000 -#define LCRR_ECL_7 0x03000000 -#define LCRR_ECL_SHIFT 24 -#define LCRR_EADC 0x00030000 -#define LCRR_EADC_1 0x00010000 -#define LCRR_EADC_2 0x00020000 -#define LCRR_EADC_3 0x00030000 -#define LCRR_EADC_4 0x00000000 -#define LCRR_EADC_SHIFT 16 -#define LCRR_CLKDIV 0x0000000F -#define LCRR_CLKDIV_2 0x00000002 -#define LCRR_CLKDIV_4 0x00000004 -#define LCRR_CLKDIV_8 0x00000008 -#define LCRR_CLKDIV_SHIFT 0 +/* PIBAR - PCI Inbound Base/Extended Address Register + */ +#define PIBAR_MASK 0xffffffff +#define PIEBAR_EBA_MASK 0x000fffff -/* - * SCCR-System Clock Control Register - */ -#define SCCR_TSEC1CM_0 0x00000000 -#define SCCR_TSEC1CM_1 0x40000000 -#define SCCR_TSEC1CM_2 0x80000000 -#define SCCR_TSEC1CM_3 0xC0000000 -#define SCCR_TSEC2CM_0 0x00000000 -#define SCCR_TSEC2CM_1 0x10000000 -#define SCCR_TSEC2CM_2 0x20000000 -#define SCCR_TSEC2CM_3 0x30000000 -#define SCCR_ENCCM_0 0x00000000 -#define SCCR_ENCCM_1 0x01000000 -#define SCCR_ENCCM_2 0x02000000 -#define SCCR_ENCCM_3 0x03000000 -#define SCCR_USBCM_0 0x00000000 -#define SCCR_USBCM_1 0x00500000 -#define SCCR_USBCM_2 0x00A00000 -#define SCCR_USBCM_3 0x00F00000 - -#define SCCR_CLK_MASK ( SCCR_TSEC1CM_3 \ - | SCCR_TSEC2CM_3 \ - | SCCR_ENCCM_3 \ - | SCCR_USBCM_3 ) - -#define SCCR_DEFAULT 0xFFFFFFFF +/* PIWAR - PCI Inbound Windows Attributes Register + */ +#define PIWAR_EN 0x80000000 +#define PIWAR_PF 0x20000000 +#define PIWAR_RTT_MASK 0x000f0000 +#define PIWAR_RTT_NO_SNOOP 0x00040000 +#define PIWAR_RTT_SNOOP 0x00050000 +#define PIWAR_WTT_MASK 0x0000f000 +#define PIWAR_WTT_NO_SNOOP 0x00004000 +#define PIWAR_WTT_SNOOP 0x00005000 +#define PIWAR_IWS_MASK 0x0000003F +#define PIWAR_IWS_4K 0x0000000B +#define PIWAR_IWS_8K 0x0000000C +#define PIWAR_IWS_16K 0x0000000D +#define PIWAR_IWS_32K 0x0000000E +#define PIWAR_IWS_64K 0x0000000F +#define PIWAR_IWS_128K 0x00000010 +#define PIWAR_IWS_256K 0x00000011 +#define PIWAR_IWS_512K 0x00000012 +#define PIWAR_IWS_1M 0x00000013 +#define PIWAR_IWS_2M 0x00000014 +#define PIWAR_IWS_4M 0x00000015 +#define PIWAR_IWS_8M 0x00000016 +#define PIWAR_IWS_16M 0x00000017 +#define PIWAR_IWS_32M 0x00000018 +#define PIWAR_IWS_64M 0x00000019 +#define PIWAR_IWS_128M 0x0000001A +#define PIWAR_IWS_256M 0x0000001B +#define PIWAR_IWS_512M 0x0000001C +#define PIWAR_IWS_1G 0x0000001D +#define PIWAR_IWS_2G 0x0000001E #endif /* __MPC83XX_H__ */ diff --git a/include/ppc405.h b/include/ppc405.h index a49912c..08f10d2 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -117,6 +117,48 @@ /*-----------------------------------------------------------------------------+ | Universal interrupt controller interrupts +-----------------------------------------------------------------------------*/ +#if defined(CONFIG_405EZ) +#define UIC_DMA0 0x80000000 /* DMA chan. 0 */ +#define UIC_DMA1 0x40000000 /* DMA chan. 1 */ +#define UIC_DMA2 0x20000000 /* DMA chan. 2 */ +#define UIC_DMA3 0x10000000 /* DMA chan. 3 */ +#define UIC_1588 0x08000000 /* IEEE 1588 network synchronization */ +#define UIC_UART0 0x04000000 /* UART 0 */ +#define UIC_UART1 0x02000000 /* UART 1 */ +#define UIC_CAN0 0x01000000 /* CAN 0 */ +#define UIC_CAN1 0x00800000 /* CAN 1 */ +#define UIC_SPI 0x00400000 /* SPI */ +#define UIC_IIC 0x00200000 /* IIC */ +#define UIC_CHT0 0x00100000 /* Chameleon timer high pri interrupt */ +#define UIC_CHT1 0x00080000 /* Chameleon timer high pri interrupt */ +#define UIC_USBH1 0x00040000 /* USB Host 1 */ +#define UIC_USBH2 0x00020000 /* USB Host 2 */ +#define UIC_USBDEV 0x00010000 /* USB Device */ +#define UIC_ENET 0x00008000 /* Ethernet interrupt status */ +#define UIC_ENET1 0x00008000 /* dummy define */ +#define UIC_EMAC_WAKE 0x00004000 /* EMAC wake up */ + +#define UIC_MADMAL 0x00002000 /* Logical OR of following MadMAL int */ +#define UIC_MAL_SERR 0x00002000 /* MAL SERR */ +#define UIC_MAL_TXDE 0x00002000 /* MAL TXDE */ +#define UIC_MAL_RXDE 0x00002000 /* MAL RXDE */ + +#define UIC_MAL_TXEOB 0x00001000 /* MAL TXEOB */ +#define UIC_MAL_TXEOB1 0x00000800 /* MAL TXEOB1 */ +#define UIC_MAL_RXEOB 0x00000400 /* MAL RXEOB */ +#define UIC_NAND 0x00000200 /* NAND Flash controller */ +#define UIC_ADC 0x00000100 /* ADC */ +#define UIC_DAC 0x00000080 /* DAC */ +#define UIC_OPB2PLB 0x00000040 /* OPB to PLB bridge interrupt */ +#define UIC_RESERVED0 0x00000020 /* Reserved */ +#define UIC_EXT0 0x00000010 /* External interrupt 0 */ +#define UIC_EXT1 0x00000008 /* External interrupt 1 */ +#define UIC_EXT2 0x00000004 /* External interrupt 2 */ +#define UIC_EXT3 0x00000002 /* External interrupt 3 */ +#define UIC_EXT4 0x00000001 /* External interrupt 4 */ + +#else /* !defined(CONFIG_405EZ) */ + #define UIC_UART0 0x80000000 /* UART 0 */ #define UIC_UART1 0x40000000 /* UART 1 */ #define UIC_IIC 0x20000000 /* IIC */ @@ -144,6 +186,7 @@ #define UIC_EXT4 0x00000004 /* External interrupt 4 */ #define UIC_EXT5 0x00000002 /* External interrupt 5 */ #define UIC_EXT6 0x00000001 /* External interrupt 6 */ +#endif /* defined(CONFIG_405EZ) */ /****************************************************************************** * SDRAM Controller @@ -496,6 +539,325 @@ */ #define VCO_MIN 500 #define VCO_MAX 1000 +#elif defined(CONFIG_405EZ) +/****************************************************************************** + * SDR Registers + ******************************************************************************/ +#define SDR_DCR_BASE 0x0E +#define sdrcfga (SDR_DCR_BASE+0x0) /* ADDR */ +#define sdrcfgd (SDR_DCR_BASE+0x1) /* Data */ + +#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data) +#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd) + +#define sdrnand0 0x4000 +#define sdrultra0 0x4040 +#define sdrultra1 0x4050 +#define sdricintstat 0x4510 + +#define SDR_NAND0_NDEN 0x80000000 + +#define SDR_ULTRA0_NDGPIOBP 0x80000000 +#define SDR_ULTRA0_CSN_MASK 0x78000000 +#define SDR_ULTRA0_CSNSEL0 0x40000000 +#define SDR_ULTRA0_CSNSEL1 0x20000000 +#define SDR_ULTRA0_CSNSEL2 0x10000000 +#define SDR_ULTRA0_CSNSEL3 0x08000000 + +#define SDR_ULTRA1_LEDNENABLE 0x40000000 + +#define SDR_ICRX_STAT 0x80000000 +#define SDR_ICTX0_STAT 0x40000000 +#define SDR_ICTX1_STAT 0x20000000 + +/****************************************************************************** + * Control + ******************************************************************************/ +#define CNTRL_DCR_BASE 0x0C +#define cprcfga (CNTRL_DCR_BASE+0x0) /* CPR addr reg */ +#define cprcfgd (CNTRL_DCR_BASE+0x1) /* CPR data reg */ + +/* CPR Registers */ +#define cprclkupd 0x020 /* CPR_CLKUPD */ +#define cprpllc 0x040 /* CPR_PLLC */ +#define cprplld 0x060 /* CPR_PLLD */ +#define cprprimad 0x080 /* CPR_PRIMAD */ +#define cprperd0 0x0e0 /* CPR_PERD0 */ +#define cprperd1 0x0e1 /* CPR_PERD1 */ +#define cprperc0 0x180 /* CPR_PERC0 */ +#define cprmisc0 0x181 /* CPR_MISC0 */ +#define cprmisc1 0x182 /* CPR_MISC1 */ + +/* + * Macro for accessing the indirect CPR register + */ +#define mtcpr(reg, data) mtdcr(cprcfga,reg);mtdcr(cprcfgd,data) +#define mfcpr(reg, data) mtdcr(cprcfga,reg);data = mfdcr(cprcfgd) + +#define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */ +#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */ +#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */ + +#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */ +#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */ +#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */ + +#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */ +#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */ +#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */ +#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */ + +#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */ +#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */ +#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */ +#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */ + +#if 0 /* Deprecated */ +#define CNTRL_DCR_BASE 0x0f0 +#define cpc0_pllmr0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */ +#define cpc0_boot (CNTRL_DCR_BASE+0x1) /* Clock status register */ +#define cpc0_epctl (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */ +#define cpc0_pllmr1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */ +#define cpc0_ucr (CNTRL_DCR_BASE+0x5) /* UART control register */ +#define cpc0_pci (CNTRL_DCR_BASE+0x9) /* PCI control register */ + +#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */ +#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */ +#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */ +#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register*/ +#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */ +#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */ +#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */ +#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */ +#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */ +#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */ + +/* Bit definitions */ +#define PLLMR0_CPU_DIV_MASK 0x00300000 /* CPU clock divider */ +#define PLLMR0_CPU_DIV_BYPASS 0x00000000 +#define PLLMR0_CPU_DIV_2 0x00100000 +#define PLLMR0_CPU_DIV_3 0x00200000 +#define PLLMR0_CPU_DIV_4 0x00300000 + +#define PLLMR0_CPU_TO_PLB_MASK 0x00030000 /* CPU:PLB Frequency Divisor */ +#define PLLMR0_CPU_PLB_DIV_1 0x00000000 +#define PLLMR0_CPU_PLB_DIV_2 0x00010000 +#define PLLMR0_CPU_PLB_DIV_3 0x00020000 +#define PLLMR0_CPU_PLB_DIV_4 0x00030000 + +#define PLLMR0_OPB_TO_PLB_MASK 0x00003000 /* OPB:PLB Frequency Divisor */ +#define PLLMR0_OPB_PLB_DIV_1 0x00000000 +#define PLLMR0_OPB_PLB_DIV_2 0x00001000 +#define PLLMR0_OPB_PLB_DIV_3 0x00002000 +#define PLLMR0_OPB_PLB_DIV_4 0x00003000 + +#define PLLMR0_EXB_TO_PLB_MASK 0x00000300 /* External Bus:PLB Divisor */ +#define PLLMR0_EXB_PLB_DIV_2 0x00000000 +#define PLLMR0_EXB_PLB_DIV_3 0x00000100 +#define PLLMR0_EXB_PLB_DIV_4 0x00000200 +#define PLLMR0_EXB_PLB_DIV_5 0x00000300 + +#define PLLMR0_MAL_TO_PLB_MASK 0x00000030 /* MAL:PLB Divisor */ +#define PLLMR0_MAL_PLB_DIV_1 0x00000000 +#define PLLMR0_MAL_PLB_DIV_2 0x00000010 +#define PLLMR0_MAL_PLB_DIV_3 0x00000020 +#define PLLMR0_MAL_PLB_DIV_4 0x00000030 + +#define PLLMR0_PCI_TO_PLB_MASK 0x00000003 /* PCI:PLB Frequency Divisor */ +#define PLLMR0_PCI_PLB_DIV_1 0x00000000 +#define PLLMR0_PCI_PLB_DIV_2 0x00000001 +#define PLLMR0_PCI_PLB_DIV_3 0x00000002 +#define PLLMR0_PCI_PLB_DIV_4 0x00000003 + +#define PLLMR1_SSCS_MASK 0x80000000 /* Select system clock source */ +#define PLLMR1_PLLR_MASK 0x40000000 /* PLL reset */ +#define PLLMR1_FBMUL_MASK 0x00F00000 /* PLL feedback multiplier value */ +#define PLLMR1_FBMUL_DIV_16 0x00000000 +#define PLLMR1_FBMUL_DIV_1 0x00100000 +#define PLLMR1_FBMUL_DIV_2 0x00200000 +#define PLLMR1_FBMUL_DIV_3 0x00300000 +#define PLLMR1_FBMUL_DIV_4 0x00400000 +#define PLLMR1_FBMUL_DIV_5 0x00500000 +#define PLLMR1_FBMUL_DIV_6 0x00600000 +#define PLLMR1_FBMUL_DIV_7 0x00700000 +#define PLLMR1_FBMUL_DIV_8 0x00800000 +#define PLLMR1_FBMUL_DIV_9 0x00900000 +#define PLLMR1_FBMUL_DIV_10 0x00A00000 +#define PLLMR1_FBMUL_DIV_11 0x00B00000 +#define PLLMR1_FBMUL_DIV_12 0x00C00000 +#define PLLMR1_FBMUL_DIV_13 0x00D00000 +#define PLLMR1_FBMUL_DIV_14 0x00E00000 +#define PLLMR1_FBMUL_DIV_15 0x00F00000 + +#define PLLMR1_FWDVA_MASK 0x00070000 /* PLL forward divider A value */ +#define PLLMR1_FWDVA_DIV_8 0x00000000 +#define PLLMR1_FWDVA_DIV_7 0x00010000 +#define PLLMR1_FWDVA_DIV_6 0x00020000 +#define PLLMR1_FWDVA_DIV_5 0x00030000 +#define PLLMR1_FWDVA_DIV_4 0x00040000 +#define PLLMR1_FWDVA_DIV_3 0x00050000 +#define PLLMR1_FWDVA_DIV_2 0x00060000 +#define PLLMR1_FWDVA_DIV_1 0x00070000 +#define PLLMR1_FWDVB_MASK 0x00007000 /* PLL forward divider B value */ +#define PLLMR1_TUNING_MASK 0x000003FF /* PLL tune bits */ + +/* Defines for CPC0_EPRCSR register */ +#define CPC0_EPRCSR_E0NFE 0x80000000 +#define CPC0_EPRCSR_E1NFE 0x40000000 +#define CPC0_EPRCSR_E1RPP 0x00000080 +#define CPC0_EPRCSR_E0RPP 0x00000040 +#define CPC0_EPRCSR_E1ERP 0x00000020 +#define CPC0_EPRCSR_E0ERP 0x00000010 +#define CPC0_EPRCSR_E1PCI 0x00000002 +#define CPC0_EPRCSR_E0PCI 0x00000001 + +/* Defines for CPC0_BOOR Register */ +#define CPC0_BOOT_SEP 0x00000002 /* serial EEPROM present */ + +/* Defines for CPC0_PLLMR1 Register fields */ +#define PLL_ACTIVE 0x80000000 +#define CPC0_PLLMR1_SSCS 0x80000000 +#define PLL_RESET 0x40000000 +#define CPC0_PLLMR1_PLLR 0x40000000 + /* Feedback multiplier */ +#define PLL_FBKDIV 0x00F00000 +#define CPC0_PLLMR1_FBDV 0x00F00000 +#define PLL_FBKDIV_16 0x00000000 +#define PLL_FBKDIV_1 0x00100000 +#define PLL_FBKDIV_2 0x00200000 +#define PLL_FBKDIV_3 0x00300000 +#define PLL_FBKDIV_4 0x00400000 +#define PLL_FBKDIV_5 0x00500000 +#define PLL_FBKDIV_6 0x00600000 +#define PLL_FBKDIV_7 0x00700000 +#define PLL_FBKDIV_8 0x00800000 +#define PLL_FBKDIV_9 0x00900000 +#define PLL_FBKDIV_10 0x00A00000 +#define PLL_FBKDIV_11 0x00B00000 +#define PLL_FBKDIV_12 0x00C00000 +#define PLL_FBKDIV_13 0x00D00000 +#define PLL_FBKDIV_14 0x00E00000 +#define PLL_FBKDIV_15 0x00F00000 + /* Forward A divisor */ +#define PLL_FWDDIVA 0x00070000 +#define CPC0_PLLMR1_FWDVA 0x00070000 +#define PLL_FWDDIVA_8 0x00000000 +#define PLL_FWDDIVA_7 0x00010000 +#define PLL_FWDDIVA_6 0x00020000 +#define PLL_FWDDIVA_5 0x00030000 +#define PLL_FWDDIVA_4 0x00040000 +#define PLL_FWDDIVA_3 0x00050000 +#define PLL_FWDDIVA_2 0x00060000 +#define PLL_FWDDIVA_1 0x00070000 + /* Forward B divisor */ +#define PLL_FWDDIVB 0x00007000 +#define CPC0_PLLMR1_FWDVB 0x00007000 +#define PLL_FWDDIVB_8 0x00000000 +#define PLL_FWDDIVB_7 0x00001000 +#define PLL_FWDDIVB_6 0x00002000 +#define PLL_FWDDIVB_5 0x00003000 +#define PLL_FWDDIVB_4 0x00004000 +#define PLL_FWDDIVB_3 0x00005000 +#define PLL_FWDDIVB_2 0x00006000 +#define PLL_FWDDIVB_1 0x00007000 + /* PLL tune bits */ +#define PLL_TUNE_MASK 0x000003FF +#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */ +#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */ +#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */ +#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */ +#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */ +#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */ +#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */ + +/* Defines for CPC0_PLLMR0 Register fields */ + /* CPU divisor */ +#define PLL_CPUDIV 0x00300000 +#define CPC0_PLLMR0_CCDV 0x00300000 +#define PLL_CPUDIV_1 0x00000000 +#define PLL_CPUDIV_2 0x00100000 +#define PLL_CPUDIV_3 0x00200000 +#define PLL_CPUDIV_4 0x00300000 + /* PLB divisor */ +#define PLL_PLBDIV 0x00030000 +#define CPC0_PLLMR0_CBDV 0x00030000 +#define PLL_PLBDIV_1 0x00000000 +#define PLL_PLBDIV_2 0x00010000 +#define PLL_PLBDIV_3 0x00020000 +#define PLL_PLBDIV_4 0x00030000 + /* OPB divisor */ +#define PLL_OPBDIV 0x00003000 +#define CPC0_PLLMR0_OPDV 0x00003000 +#define PLL_OPBDIV_1 0x00000000 +#define PLL_OPBDIV_2 0x00001000 +#define PLL_OPBDIV_3 0x00002000 +#define PLL_OPBDIV_4 0x00003000 + /* EBC divisor */ +#define PLL_EXTBUSDIV 0x00000300 +#define CPC0_PLLMR0_EPDV 0x00000300 +#define PLL_EXTBUSDIV_2 0x00000000 +#define PLL_EXTBUSDIV_3 0x00000100 +#define PLL_EXTBUSDIV_4 0x00000200 +#define PLL_EXTBUSDIV_5 0x00000300 + /* MAL divisor */ +#define PLL_MALDIV 0x00000030 +#define CPC0_PLLMR0_MPDV 0x00000030 +#define PLL_MALDIV_1 0x00000000 +#define PLL_MALDIV_2 0x00000010 +#define PLL_MALDIV_3 0x00000020 +#define PLL_MALDIV_4 0x00000030 + /* PCI divisor */ +#define PLL_PCIDIV 0x00000003 +#define CPC0_PLLMR0_PPFD 0x00000003 +#define PLL_PCIDIV_1 0x00000000 +#define PLL_PCIDIV_2 0x00000001 +#define PLL_PCIDIV_3 0x00000002 +#define PLL_PCIDIV_4 0x00000003 + +/* + *------------------------------------------------------------------------------- + * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI, + * assuming a 33.3MHz input clock to the 405EP. + *------------------------------------------------------------------------------- + */ +#define PLLMR0_266_133_66 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PLLMR1_266_133_66 (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_133_66_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PLLMR1_133_66_66_33 (PLL_FBKDIV_4 | \ + PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \ + PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_266_66_33_33 (PLL_CPUDIV_1 | PLL_PLBDIV_4 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_2) +#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) + +/* + * PLL Voltage Controlled Oscillator (VCO) definitions + * Maximum and minimum values (in MHz) for correct PLL operation. + */ +#define VCO_MIN 500 +#define VCO_MAX 1000 +#endif /* #if 0 */ #else /* #ifdef CONFIG_405EP */ /****************************************************************************** * Control @@ -578,6 +940,121 @@ /****************************************************************************** * Memory Access Layer ******************************************************************************/ +#if defined(CONFIG_405EZ) +#define MAL_DCR_BASE 0x380 +#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ +#define malesr (MAL_DCR_BASE+0x01) /* Err Status reg (Read/Clear)*/ +#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */ +#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */ +#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set)*/ +#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */ +#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */ +#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */ +/* 0x08-0x0F Reserved */ +#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set)*/ +#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */ +#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */ +#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */ +/* 0x14-0x1F Reserved */ +#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table ptr reg */ +#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table ptr reg */ +#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table ptr reg */ +#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table ptr reg */ +#define maltxctp4r (MAL_DCR_BASE+0x24) /* TX 4 Channel table ptr reg */ +#define maltxctp5r (MAL_DCR_BASE+0x25) /* TX 5 Channel table ptr reg */ +#define maltxctp6r (MAL_DCR_BASE+0x26) /* TX 6 Channel table ptr reg */ +#define maltxctp7r (MAL_DCR_BASE+0x27) /* TX 7 Channel table ptr reg */ +#define maltxctp8r (MAL_DCR_BASE+0x28) /* TX 8 Channel table ptr reg */ +#define maltxctp9r (MAL_DCR_BASE+0x29) /* TX 9 Channel table ptr reg */ +#define maltxctp10r (MAL_DCR_BASE+0x2A) /* TX 10 Channel table ptr reg */ +#define maltxctp11r (MAL_DCR_BASE+0x2B) /* TX 11 Channel table ptr reg */ +#define maltxctp12r (MAL_DCR_BASE+0x2C) /* TX 12 Channel table ptr reg */ +#define maltxctp13r (MAL_DCR_BASE+0x2D) /* TX 13 Channel table ptr reg */ +#define maltxctp14r (MAL_DCR_BASE+0x2E) /* TX 14 Channel table ptr reg */ +#define maltxctp15r (MAL_DCR_BASE+0x2F) /* TX 15 Channel table ptr reg */ +#define maltxctp16r (MAL_DCR_BASE+0x30) /* TX 16 Channel table ptr reg */ +#define maltxctp17r (MAL_DCR_BASE+0x31) /* TX 17 Channel table ptr reg */ +#define maltxctp18r (MAL_DCR_BASE+0x32) /* TX 18 Channel table ptr reg */ +#define maltxctp19r (MAL_DCR_BASE+0x33) /* TX 19 Channel table ptr reg */ +#define maltxctp20r (MAL_DCR_BASE+0x34) /* TX 20 Channel table ptr reg */ +#define maltxctp21r (MAL_DCR_BASE+0x35) /* TX 21 Channel table ptr reg */ +#define maltxctp22r (MAL_DCR_BASE+0x36) /* TX 22 Channel table ptr reg */ +#define maltxctp23r (MAL_DCR_BASE+0x37) /* TX 23 Channel table ptr reg */ +#define maltxctp24r (MAL_DCR_BASE+0x38) /* TX 24 Channel table ptr reg */ +#define maltxctp25r (MAL_DCR_BASE+0x39) /* TX 25 Channel table ptr reg */ +#define maltxctp26r (MAL_DCR_BASE+0x3A) /* TX 26 Channel table ptr reg */ +#define maltxctp27r (MAL_DCR_BASE+0x3B) /* TX 27 Channel table ptr reg */ +#define maltxctp28r (MAL_DCR_BASE+0x3C) /* TX 28 Channel table ptr reg */ +#define maltxctp29r (MAL_DCR_BASE+0x3D) /* TX 29 Channel table ptr reg */ +#define maltxctp30r (MAL_DCR_BASE+0x3E) /* TX 30 Channel table ptr reg */ +#define maltxctp31r (MAL_DCR_BASE+0x3F) /* TX 31 Channel table ptr reg */ +#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table ptr reg */ +#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table ptr reg */ +#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table ptr reg */ +#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table ptr reg */ +#define malrxctp4r (MAL_DCR_BASE+0x44) /* RX 4 Channel table ptr reg */ +#define malrxctp5r (MAL_DCR_BASE+0x45) /* RX 5 Channel table ptr reg */ +#define malrxctp6r (MAL_DCR_BASE+0x46) /* RX 6 Channel table ptr reg */ +#define malrxctp7r (MAL_DCR_BASE+0x47) /* RX 7 Channel table ptr reg */ +#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table ptr reg */ +#define malrxctp9r (MAL_DCR_BASE+0x49) /* RX 9 Channel table ptr reg */ +#define malrxctp10r (MAL_DCR_BASE+0x4A) /* RX 10 Channel table ptr reg */ +#define malrxctp11r (MAL_DCR_BASE+0x4B) /* RX 11 Channel table ptr reg */ +#define malrxctp12r (MAL_DCR_BASE+0x4C) /* RX 12 Channel table ptr reg */ +#define malrxctp13r (MAL_DCR_BASE+0x4D) /* RX 13 Channel table ptr reg */ +#define malrxctp14r (MAL_DCR_BASE+0x4E) /* RX 14 Channel table ptr reg */ +#define malrxctp15r (MAL_DCR_BASE+0x4F) /* RX 15 Channel table ptr reg */ +#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table ptr reg */ +#define malrxctp17r (MAL_DCR_BASE+0x51) /* RX 17 Channel table ptr reg */ +#define malrxctp18r (MAL_DCR_BASE+0x52) /* RX 18 Channel table ptr reg */ +#define malrxctp19r (MAL_DCR_BASE+0x53) /* RX 19 Channel table ptr reg */ +#define malrxctp20r (MAL_DCR_BASE+0x54) /* RX 20 Channel table ptr reg */ +#define malrxctp21r (MAL_DCR_BASE+0x55) /* RX 21 Channel table ptr reg */ +#define malrxctp22r (MAL_DCR_BASE+0x56) /* RX 22 Channel table ptr reg */ +#define malrxctp23r (MAL_DCR_BASE+0x57) /* RX 23 Channel table ptr reg */ +#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table ptr reg */ +#define malrxctp25r (MAL_DCR_BASE+0x59) /* RX 25 Channel table ptr reg */ +#define malrxctp26r (MAL_DCR_BASE+0x5A) /* RX 26 Channel table ptr reg */ +#define malrxctp27r (MAL_DCR_BASE+0x5B) /* RX 27 Channel table ptr reg */ +#define malrxctp28r (MAL_DCR_BASE+0x5C) /* RX 28 Channel table ptr reg */ +#define malrxctp29r (MAL_DCR_BASE+0x5D) /* RX 29 Channel table ptr reg */ +#define malrxctp30r (MAL_DCR_BASE+0x5E) /* RX 30 Channel table ptr reg */ +#define malrxctp31r (MAL_DCR_BASE+0x5F) /* RX 31 Channel table ptr reg */ +#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ +#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ +#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */ +#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */ +#define malrcbs4 (MAL_DCR_BASE+0x64) /* RX 4 Channel buffer size reg */ +#define malrcbs5 (MAL_DCR_BASE+0x65) /* RX 5 Channel buffer size reg */ +#define malrcbs6 (MAL_DCR_BASE+0x66) /* RX 6 Channel buffer size reg */ +#define malrcbs7 (MAL_DCR_BASE+0x67) /* RX 7 Channel buffer size reg */ +#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */ +#define malrcbs9 (MAL_DCR_BASE+0x69) /* RX 9 Channel buffer size reg */ +#define malrcbs10 (MAL_DCR_BASE+0x6A) /* RX 10 Channel buffer size reg */ +#define malrcbs11 (MAL_DCR_BASE+0x6B) /* RX 11 Channel buffer size reg */ +#define malrcbs12 (MAL_DCR_BASE+0x6C) /* RX 12 Channel buffer size reg */ +#define malrcbs13 (MAL_DCR_BASE+0x6D) /* RX 13 Channel buffer size reg */ +#define malrcbs14 (MAL_DCR_BASE+0x6E) /* RX 14 Channel buffer size reg */ +#define malrcbs15 (MAL_DCR_BASE+0x6F) /* RX 15 Channel buffer size reg */ +#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */ +#define malrcbs17 (MAL_DCR_BASE+0x71) /* RX 17 Channel buffer size reg */ +#define malrcbs18 (MAL_DCR_BASE+0x72) /* RX 18 Channel buffer size reg */ +#define malrcbs19 (MAL_DCR_BASE+0x73) /* RX 19 Channel buffer size reg */ +#define malrcbs20 (MAL_DCR_BASE+0x74) /* RX 20 Channel buffer size reg */ +#define malrcbs21 (MAL_DCR_BASE+0x75) /* RX 21 Channel buffer size reg */ +#define malrcbs22 (MAL_DCR_BASE+0x76) /* RX 22 Channel buffer size reg */ +#define malrcbs23 (MAL_DCR_BASE+0x77) /* RX 23 Channel buffer size reg */ +#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */ +#define malrcbs25 (MAL_DCR_BASE+0x79) /* RX 25 Channel buffer size reg */ +#define malrcbs26 (MAL_DCR_BASE+0x7A) /* RX 26 Channel buffer size reg */ +#define malrcbs27 (MAL_DCR_BASE+0x7B) /* RX 27 Channel buffer size reg */ +#define malrcbs28 (MAL_DCR_BASE+0x7C) /* RX 28 Channel buffer size reg */ +#define malrcbs29 (MAL_DCR_BASE+0x7D) /* RX 29 Channel buffer size reg */ +#define malrcbs30 (MAL_DCR_BASE+0x7E) /* RX 30 Channel buffer size reg */ +#define malrcbs31 (MAL_DCR_BASE+0x7F) /* RX 31 Channel buffer size reg */ + +#else /* !defined(CONFIG_405EZ) */ + #define MAL_DCR_BASE 0x180 #define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ #define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */ @@ -598,6 +1075,7 @@ #define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */ #define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ #define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ +#endif /* defined(CONFIG_405EZ) */ /*----------------------------------------------------------------------------- | IIC Register Offsets @@ -635,15 +1113,76 @@ /****************************************************************************** * On Chip Memory ******************************************************************************/ +#if defined(CONFIG_405EZ) +#define OCM_DCR_BASE 0x020 +#define ocmplb3cr1 (OCM_DCR_BASE+0x00) /* OCM PLB3 Bank 1 Config Reg */ +#define ocmplb3cr2 (OCM_DCR_BASE+0x01) /* OCM PLB3 Bank 2 Config Reg */ +#define ocmplb3bear (OCM_DCR_BASE+0x02) /* OCM PLB3 Bus Error Add Reg */ +#define ocmplb3besr0 (OCM_DCR_BASE+0x03) /* OCM PLB3 Bus Error Stat Reg 0 */ +#define ocmplb3besr1 (OCM_DCR_BASE+0x04) /* OCM PLB3 Bus Error Stat Reg 1 */ +#define ocmcid (OCM_DCR_BASE+0x05) /* OCM Core ID */ +#define ocmrevid (OCM_DCR_BASE+0x06) /* OCM Revision ID */ +#define ocmplb3dpc (OCM_DCR_BASE+0x07) /* OCM PLB3 Data Parity Check */ +#define ocmdscr1 (OCM_DCR_BASE+0x08) /* OCM D-side Bank 1 Config Reg */ +#define ocmdscr2 (OCM_DCR_BASE+0x09) /* OCM D-side Bank 2 Config Reg */ +#define ocmiscr1 (OCM_DCR_BASE+0x0A) /* OCM I-side Bank 1 Config Reg */ +#define ocmiscr2 (OCM_DCR_BASE+0x0B) /* OCM I-side Bank 2 Config Reg */ +#define ocmdsisdpc (OCM_DCR_BASE+0x0C) /* OCM D-side/I-side Data Par Chk*/ +#define ocmdsisbear (OCM_DCR_BASE+0x0D) /* OCM D-side/I-side Bus Err Addr*/ +#define ocmdsisbesr (OCM_DCR_BASE+0x0E) /* OCM D-side/I-side Bus Err Stat*/ +#else #define OCM_DCR_BASE 0x018 #define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */ #define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */ #define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */ #define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */ +#endif /* CONFIG_405EZ */ /****************************************************************************** * GPIO macro register defines ******************************************************************************/ +#if defined(CONFIG_405EZ) +/* Only the 405EZ has 2 GPIOs */ +#define GPIO_BASE 0xEF600700 +#define GPIO0_OR (GPIO_BASE+0x0) +#define GPIO0_TCR (GPIO_BASE+0x4) +#define GPIO0_OSRL (GPIO_BASE+0x8) +#define GPIO0_OSRH (GPIO_BASE+0xC) +#define GPIO0_TSRL (GPIO_BASE+0x10) +#define GPIO0_TSRH (GPIO_BASE+0x14) +#define GPIO0_ODR (GPIO_BASE+0x18) +#define GPIO0_IR (GPIO_BASE+0x1C) +#define GPIO0_RR1 (GPIO_BASE+0x20) +#define GPIO0_RR2 (GPIO_BASE+0x24) +#define GPIO0_RR3 (GPIO_BASE+0x28) +#define GPIO0_ISR1L (GPIO_BASE+0x30) +#define GPIO0_ISR1H (GPIO_BASE+0x34) +#define GPIO0_ISR2L (GPIO_BASE+0x38) +#define GPIO0_ISR2H (GPIO_BASE+0x3C) +#define GPIO0_ISR3L (GPIO_BASE+0x40) +#define GPIO0_ISR3H (GPIO_BASE+0x44) + +#define GPIO1_BASE 0xEF600800 +#define GPIO1_OR (GPIO1_BASE+0x0) +#define GPIO1_TCR (GPIO1_BASE+0x4) +#define GPIO1_OSRL (GPIO1_BASE+0x8) +#define GPIO1_OSRH (GPIO1_BASE+0xC) +#define GPIO1_TSRL (GPIO1_BASE+0x10) +#define GPIO1_TSRH (GPIO1_BASE+0x14) +#define GPIO1_ODR (GPIO1_BASE+0x18) +#define GPIO1_IR (GPIO1_BASE+0x1C) +#define GPIO1_RR1 (GPIO1_BASE+0x20) +#define GPIO1_RR2 (GPIO1_BASE+0x24) +#define GPIO1_RR3 (GPIO1_BASE+0x28) +#define GPIO1_ISR1L (GPIO1_BASE+0x30) +#define GPIO1_ISR1H (GPIO1_BASE+0x34) +#define GPIO1_ISR2L (GPIO1_BASE+0x38) +#define GPIO1_ISR2H (GPIO1_BASE+0x3C) +#define GPIO1_ISR3L (GPIO1_BASE+0x40) +#define GPIO1_ISR3H (GPIO1_BASE+0x44) + +#else /* !405EZ */ + #define GPIO_BASE 0xEF600700 #define GPIO0_OR (GPIO_BASE+0x0) #define GPIO0_TCR (GPIO_BASE+0x4) @@ -660,6 +1199,7 @@ #define GPIO0_ISR2H (GPIO_BASE+0x38) #define GPIO0_ISR2L (GPIO_BASE+0x3C) +#endif /* CONFIG_405EZ */ /* * Macro for accessing the indirect EBC register diff --git a/include/ppc440.h b/include/ppc440.h index 1c7f11c..9b15c2c 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -417,7 +417,9 @@ #define SDR0_PEGPLLSET1 0x000003A0 /* PE Pll LC Tank Setting1 */ #define SDR0_PEGPLLSET2 0x000003A1 /* PE Pll LC Tank Setting2 */ #define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */ +#endif /* CONFIG_440SPE */ +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) /*----------------------------------------------------------------------------+ | SDRAM Controller +----------------------------------------------------------------------------*/ @@ -453,9 +455,16 @@ /*-----------------------------------------------------------------------------+ | Memory Bank 0-7 configuration +-----------------------------------------------------------------------------*/ -#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */ +#if defined(CONFIG_440SPE) +#define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */ #define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFFE00000)>>2) #define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFFE00000)<<2) +#endif /* CONFIG_440SPE */ +#if defined(CONFIG_440SP) +#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */ +#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFF800000)) +#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFF800000)) +#endif /* CONFIG_440SP */ #define SDRAM_RXBAS_SDSZ_MASK 0x0000FFC0 /* Size */ #define SDRAM_RXBAS_SDSZ_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<6) #define SDRAM_RXBAS_SDSZ_DECODE(n) ((((unsigned long)(n))>>6)&0x3FF) @@ -2167,6 +2176,20 @@ /*-----------------------------------------------------------------------------+ | SDR0 Bit Settings +-----------------------------------------------------------------------------*/ +#if defined(CONFIG_440SP) +#define SDR0_SRST 0x0200 + +#define SDR0_DDR0 0x00E1 +#define SDR0_DDR0_DPLLRST 0x80000000 +#define SDR0_DDR0_DDRM_MASK 0x60000000 +#define SDR0_DDR0_DDRM_DDR1 0x20000000 +#define SDR0_DDR0_DDRM_DDR2 0x40000000 +#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29) +#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03) +#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0) +#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF) +#endif + #if defined(CONFIG_440SPE) #define SDR0_CP440 0x0180 #define SDR0_CP440_ERPN_MASK 0x30000000 @@ -3293,26 +3316,26 @@ typedef struct { unsigned long add; /* gpio core base address */ /* * Macros for accessing the indirect EBC registers */ -#define mtebc(reg, data) { mtdcr(ebccfga,reg);mtdcr(ebccfgd,data); } -#define mfebc(reg, data) { mtdcr(ebccfga,reg);data = mfdcr(ebccfgd); } +#define mtebc(reg, data) do { mtdcr(ebccfga,reg);mtdcr(ebccfgd,data); } while (0) +#define mfebc(reg, data) do { mtdcr(ebccfga,reg);data = mfdcr(ebccfgd); } while (0) /* * Macros for accessing the indirect SDRAM controller registers */ -#define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } -#define mfsdram(reg, data) { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } +#define mtsdram(reg, data) do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0) +#define mfsdram(reg, data) do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0) /* * Macros for accessing the indirect clocking controller registers */ -#define mtclk(reg, data) { mtdcr(clkcfga,reg);mtdcr(clkcfgd,data); } -#define mfclk(reg, data) { mtdcr(clkcfga,reg);data = mfdcr(clkcfgd); } +#define mtclk(reg, data) do { mtdcr(clkcfga,reg);mtdcr(clkcfgd,data); } while (0) +#define mfclk(reg, data) do { mtdcr(clkcfga,reg);data = mfdcr(clkcfgd); } while (0) /* * Macros for accessing the sdr controller registers */ -#define mtsdr(reg, data) { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } -#define mfsdr(reg, data) { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } +#define mtsdr(reg, data) do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } while (0) +#define mfsdr(reg, data) do { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } while (0) #ifndef __ASSEMBLY__ diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h index 43c5ca4..3d8ca09 100644 --- a/include/ppc4xx_enet.h +++ b/include/ppc4xx_enet.h @@ -130,13 +130,13 @@ typedef struct emac_4xx_hw_st { #if defined(CONFIG_440GX) -#define EMAC_NUM_DEV 4 +#define EMAC_NUM_DEV 4 #elif (defined(CONFIG_440) || defined(CONFIG_405EP)) && \ defined(CONFIG_NET_MULTI) && \ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) -#define EMAC_NUM_DEV 2 +#define EMAC_NUM_DEV 2 #else -#define EMAC_NUM_DEV 1 +#define EMAC_NUM_DEV 1 #endif #ifdef CONFIG_IBM_EMAC4_V4 /* EMAC4 V4 changed bit setting */ @@ -153,16 +153,16 @@ typedef struct emac_4xx_hw_st { /*ZMII Bridge Register addresses */ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) -#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00) +#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00) #else -#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780) +#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780) #endif -#define ZMII_FER (ZMII_BASE) -#define ZMII_SSR (ZMII_BASE + 4) -#define ZMII_SMIISR (ZMII_BASE + 8) +#define ZMII_FER (ZMII_BASE) +#define ZMII_SSR (ZMII_BASE + 4) +#define ZMII_SMIISR (ZMII_BASE + 8) -#define ZMII_RMII 0x22000000 -#define ZMII_MDI0 0x80000000 +#define ZMII_RMII 0x22000000 +#define ZMII_MDI0 0x80000000 /* ZMII FER Register Bit Definitions */ #define ZMII_FER_DIS (0x0) @@ -299,49 +299,41 @@ typedef struct emac_4xx_hw_st { #if defined(CONFIG_440) #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) -#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00) +#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00) #else -#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800) +#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800) #endif #else -#define EMAC_BASE 0xEF600800 +#if defined(CONFIG_405EZ) +#define EMAC_BASE 0xEF600900 +#else +#define EMAC_BASE 0xEF600800 +#endif #endif -#define EMAC_M0 (EMAC_BASE) -#define EMAC_M1 (EMAC_BASE + 4) -#define EMAC_TXM0 (EMAC_BASE + 8) -#define EMAC_TXM1 (EMAC_BASE + 12) -#define EMAC_RXM (EMAC_BASE + 16) -#define EMAC_ISR (EMAC_BASE + 20) -#define EMAC_IER (EMAC_BASE + 24) -#define EMAC_IAH (EMAC_BASE + 28) -#define EMAC_IAL (EMAC_BASE + 32) -#define EMAC_VLAN_TPID_REG (EMAC_BASE + 36) -#define EMAC_VLAN_TCI_REG (EMAC_BASE + 40) +#define EMAC_M0 (EMAC_BASE) +#define EMAC_M1 (EMAC_BASE + 4) +#define EMAC_TXM0 (EMAC_BASE + 8) +#define EMAC_TXM1 (EMAC_BASE + 12) +#define EMAC_RXM (EMAC_BASE + 16) +#define EMAC_ISR (EMAC_BASE + 20) +#define EMAC_IER (EMAC_BASE + 24) +#define EMAC_IAH (EMAC_BASE + 28) +#define EMAC_IAL (EMAC_BASE + 32) #define EMAC_PAUSE_TIME_REG (EMAC_BASE + 44) -#define EMAC_IND_HASH_1 (EMAC_BASE + 48) -#define EMAC_IND_HASH_2 (EMAC_BASE + 52) -#define EMAC_IND_HASH_3 (EMAC_BASE + 56) -#define EMAC_IND_HASH_4 (EMAC_BASE + 60) -#define EMAC_GRP_HASH_1 (EMAC_BASE + 64) -#define EMAC_GRP_HASH_2 (EMAC_BASE + 68) -#define EMAC_GRP_HASH_3 (EMAC_BASE + 72) -#define EMAC_GRP_HASH_4 (EMAC_BASE + 76) -#define EMAC_LST_SRC_LOW (EMAC_BASE + 80) -#define EMAC_LST_SRC_HI (EMAC_BASE + 84) #define EMAC_I_FRAME_GAP_REG (EMAC_BASE + 88) -#define EMAC_STACR (EMAC_BASE + 92) -#define EMAC_TRTR (EMAC_BASE + 96) -#define EMAC_RX_HI_LO_WMARK (EMAC_BASE + 100) +#define EMAC_STACR (EMAC_BASE + 92) +#define EMAC_TRTR (EMAC_BASE + 96) +#define EMAC_RX_HI_LO_WMARK (EMAC_BASE + 100) /* bit definitions */ /* MODE REG 0 */ -#define EMAC_M0_RXI (0x80000000) -#define EMAC_M0_TXI (0x40000000) -#define EMAC_M0_SRST (0x20000000) -#define EMAC_M0_TXE (0x10000000) -#define EMAC_M0_RXE (0x08000000) -#define EMAC_M0_WKE (0x04000000) +#define EMAC_M0_RXI (0x80000000) +#define EMAC_M0_TXI (0x40000000) +#define EMAC_M0_SRST (0x20000000) +#define EMAC_M0_TXE (0x10000000) +#define EMAC_M0_RXE (0x08000000) +#define EMAC_M0_WKE (0x04000000) /* on 440GX EMAC_MR1 has a different layout! */ #if defined(CONFIG_440GX) || \ @@ -351,23 +343,23 @@ typedef struct emac_4xx_hw_st { #define EMAC_M1_FDE (0x80000000) #define EMAC_M1_ILE (0x40000000) #define EMAC_M1_VLE (0x20000000) -#define EMAC_M1_EIFC (0x10000000) -#define EMAC_M1_APP (0x08000000) -#define EMAC_M1_RSVD (0x06000000) -#define EMAC_M1_IST (0x01000000) -#define EMAC_M1_MF_1000MBPS (0x00800000) /* 0's for 10MBPS */ -#define EMAC_M1_MF_100MBPS (0x00400000) -#define EMAC_M1_RFS_16K (0x00280000) /* ~4k for 512 byte */ -#define EMAC_M1_RFS_8K (0x00200000) /* ~4k for 512 byte */ -#define EMAC_M1_RFS_4K (0x00180000) /* ~4k for 512 byte */ -#define EMAC_M1_RFS_2K (0x00100000) -#define EMAC_M1_RFS_1K (0x00080000) -#define EMAC_M1_TX_FIFO_16K (0x00050000) /* 0's for 512 byte */ -#define EMAC_M1_TX_FIFO_8K (0x00040000) -#define EMAC_M1_TX_FIFO_4K (0x00030000) +#define EMAC_M1_EIFC (0x10000000) +#define EMAC_M1_APP (0x08000000) +#define EMAC_M1_RSVD (0x06000000) +#define EMAC_M1_IST (0x01000000) +#define EMAC_M1_MF_1000MBPS (0x00800000) /* 0's for 10MBPS */ +#define EMAC_M1_MF_100MBPS (0x00400000) +#define EMAC_M1_RFS_16K (0x00280000) /* ~4k for 512 byte */ +#define EMAC_M1_RFS_8K (0x00200000) /* ~4k for 512 byte */ +#define EMAC_M1_RFS_4K (0x00180000) /* ~4k for 512 byte */ +#define EMAC_M1_RFS_2K (0x00100000) +#define EMAC_M1_RFS_1K (0x00080000) +#define EMAC_M1_TX_FIFO_16K (0x00050000) /* 0's for 512 byte */ +#define EMAC_M1_TX_FIFO_8K (0x00040000) +#define EMAC_M1_TX_FIFO_4K (0x00030000) #define EMAC_M1_TX_FIFO_2K (0x00020000) -#define EMAC_M1_TX_FIFO_1K (0x00010000) -#define EMAC_M1_TR_MULTI (0x00008000) /* 0'x for single packet */ +#define EMAC_M1_TX_FIFO_1K (0x00010000) +#define EMAC_M1_TR_MULTI (0x00008000) /* 0'x for single packet */ #define EMAC_M1_MWSW (0x00007000) #define EMAC_M1_JUMBO_ENABLE (0x00000800) #define EMAC_M1_IPPA (0x000007c0) @@ -378,34 +370,34 @@ typedef struct emac_4xx_hw_st { #define EMAC_M1_RSVD1 (0x00000007) #else /* defined(CONFIG_440GX) */ /* EMAC_MR1 is the same on 405GP, 405GPr, 405EP, 440GP, 440EP */ -#define EMAC_M1_FDE 0x80000000 -#define EMAC_M1_ILE 0x40000000 -#define EMAC_M1_VLE 0x20000000 -#define EMAC_M1_EIFC 0x10000000 -#define EMAC_M1_APP 0x08000000 -#define EMAC_M1_AEMI 0x02000000 -#define EMAC_M1_IST 0x01000000 -#define EMAC_M1_MF_1000MBPS 0x00800000 /* 0's for 10MBPS */ -#define EMAC_M1_MF_100MBPS 0x00400000 -#define EMAC_M1_RFS_4K 0x00300000 /* ~4k for 512 byte */ -#define EMAC_M1_RFS_2K 0x00200000 -#define EMAC_M1_RFS_1K 0x00100000 -#define EMAC_M1_TX_FIFO_2K 0x00080000 /* 0's for 512 byte */ -#define EMAC_M1_TX_FIFO_1K 0x00040000 -#define EMAC_M1_TR0_DEPEND 0x00010000 /* 0'x for single packet */ -#define EMAC_M1_TR0_MULTI 0x00008000 -#define EMAC_M1_TR1_DEPEND 0x00004000 -#define EMAC_M1_TR1_MULTI 0x00002000 +#define EMAC_M1_FDE 0x80000000 +#define EMAC_M1_ILE 0x40000000 +#define EMAC_M1_VLE 0x20000000 +#define EMAC_M1_EIFC 0x10000000 +#define EMAC_M1_APP 0x08000000 +#define EMAC_M1_AEMI 0x02000000 +#define EMAC_M1_IST 0x01000000 +#define EMAC_M1_MF_1000MBPS 0x00800000 /* 0's for 10MBPS */ +#define EMAC_M1_MF_100MBPS 0x00400000 +#define EMAC_M1_RFS_4K 0x00300000 /* ~4k for 512 byte */ +#define EMAC_M1_RFS_2K 0x00200000 +#define EMAC_M1_RFS_1K 0x00100000 +#define EMAC_M1_TX_FIFO_2K 0x00080000 /* 0's for 512 byte */ +#define EMAC_M1_TX_FIFO_1K 0x00040000 +#define EMAC_M1_TR0_DEPEND 0x00010000 /* 0'x for single packet */ +#define EMAC_M1_TR0_MULTI 0x00008000 +#define EMAC_M1_TR1_DEPEND 0x00004000 +#define EMAC_M1_TR1_MULTI 0x00002000 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) -#define EMAC_M1_JUMBO_ENABLE 0x00001000 +#define EMAC_M1_JUMBO_ENABLE 0x00001000 #endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */ #endif /* defined(CONFIG_440GX) */ /* Transmit Mode Register 0 */ -#define EMAC_TXM0_GNP0 (0x80000000) -#define EMAC_TXM0_GNP1 (0x40000000) -#define EMAC_TXM0_GNPD (0x20000000) -#define EMAC_TXM0_FC (0x10000000) +#define EMAC_TXM0_GNP0 (0x80000000) +#define EMAC_TXM0_GNP1 (0x40000000) +#define EMAC_TXM0_GNPD (0x20000000) +#define EMAC_TXM0_FC (0x10000000) /* Receive Mode Register */ #define EMAC_RMR_SP (0x80000000) @@ -427,39 +419,38 @@ typedef struct emac_4xx_hw_st { #define EMAC_ISR_PP (0x01000000) #define EMAC_ISR_BP (0x00800000) #define EMAC_ISR_RP (0x00400000) -#define EMAC_ISR_SE (0x00200000) -#define EMAC_ISR_SYE (0x00100000) -#define EMAC_ISR_BFCS (0x00080000) -#define EMAC_ISR_PTLE (0x00040000) -#define EMAC_ISR_ORE (0x00020000) -#define EMAC_ISR_IRE (0x00010000) -#define EMAC_ISR_DBDM (0x00000200) -#define EMAC_ISR_DB0 (0x00000100) -#define EMAC_ISR_SE0 (0x00000080) -#define EMAC_ISR_TE0 (0x00000040) -#define EMAC_ISR_DB1 (0x00000020) -#define EMAC_ISR_SE1 (0x00000010) -#define EMAC_ISR_TE1 (0x00000008) -#define EMAC_ISR_MOS (0x00000002) -#define EMAC_ISR_MOF (0x00000001) - +#define EMAC_ISR_SE (0x00200000) +#define EMAC_ISR_SYE (0x00100000) +#define EMAC_ISR_BFCS (0x00080000) +#define EMAC_ISR_PTLE (0x00040000) +#define EMAC_ISR_ORE (0x00020000) +#define EMAC_ISR_IRE (0x00010000) +#define EMAC_ISR_DBDM (0x00000200) +#define EMAC_ISR_DB0 (0x00000100) +#define EMAC_ISR_SE0 (0x00000080) +#define EMAC_ISR_TE0 (0x00000040) +#define EMAC_ISR_DB1 (0x00000020) +#define EMAC_ISR_SE1 (0x00000010) +#define EMAC_ISR_TE1 (0x00000008) +#define EMAC_ISR_MOS (0x00000002) +#define EMAC_ISR_MOF (0x00000001) /* STA CONTROL REG */ -#define EMAC_STACR_OC (0x00008000) -#define EMAC_STACR_PHYE (0x00004000) +#define EMAC_STACR_OC (0x00008000) +#define EMAC_STACR_PHYE (0x00004000) #ifdef CONFIG_IBM_EMAC4_V4 /* EMAC4 V4 changed bit setting */ -#define EMAC_STACR_INDIRECT_MODE (0x00002000) -#define EMAC_STACR_WRITE (0x00000800) /* $BUC */ -#define EMAC_STACR_READ (0x00001000) /* $BUC */ -#define EMAC_STACR_OP_MASK (0x00001800) -#define EMAC_STACR_MDIO_ADDR (0x00000000) -#define EMAC_STACR_MDIO_WRITE (0x00000800) -#define EMAC_STACR_MDIO_READ (0x00001800) -#define EMAC_STACR_MDIO_READ_INC (0x00001000) +#define EMAC_STACR_INDIRECT_MODE (0x00002000) +#define EMAC_STACR_WRITE (0x00000800) /* $BUC */ +#define EMAC_STACR_READ (0x00001000) /* $BUC */ +#define EMAC_STACR_OP_MASK (0x00001800) +#define EMAC_STACR_MDIO_ADDR (0x00000000) +#define EMAC_STACR_MDIO_WRITE (0x00000800) +#define EMAC_STACR_MDIO_READ (0x00001800) +#define EMAC_STACR_MDIO_READ_INC (0x00001000) #else -#define EMAC_STACR_WRITE (0x00002000) -#define EMAC_STACR_READ (0x00001000) +#define EMAC_STACR_WRITE (0x00002000) +#define EMAC_STACR_READ (0x00001000) #endif #define EMAC_STACR_CLK_83MHZ (0x00000800) /* 0's for 50Mhz */ @@ -467,9 +458,9 @@ typedef struct emac_4xx_hw_st { #define EMAC_STACR_CLK_100MHZ (0x00000C00) /* Transmit Request Threshold Register */ -#define EMAC_TRTR_256 (0x18000000) /* 0's for 64 Bytes */ -#define EMAC_TRTR_192 (0x10000000) -#define EMAC_TRTR_128 (0x01000000) +#define EMAC_TRTR_256 (0x18000000) /* 0's for 64 Bytes */ +#define EMAC_TRTR_192 (0x10000000) +#define EMAC_TRTR_128 (0x01000000) /* the follwing defines are for the MadMAL status and control registers. */ /* For bits 0..5 look at the mal.h file */ |