diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/at91rm9200dk.h | 46 | ||||
| -rw-r--r-- | include/configs/cmc_pu2.h | 46 | ||||
| -rw-r--r-- | include/configs/csb637.h | 46 | ||||
| -rw-r--r-- | include/configs/mp2usb.h | 46 |
4 files changed, 92 insertions, 92 deletions
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 746f0ef..c7e83cc 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -45,33 +45,33 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 /* flash */ -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ /* clocks */ -#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ +#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ /* sdram */ -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000080 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ #else #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index cdd308d..d9acb47 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -44,33 +44,33 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 /* flash */ -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ /* clocks */ -#define PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */ -#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */ +#define CONFIG_SYS_PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */ /* sdram */ -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR_VAL 0x3399c1d4 /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000080 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ #else #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/include/configs/csb637.h b/include/configs/csb637.h index 682db44..2df77cf 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -45,33 +45,33 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 /* flash */ -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ /* clocks */ -#define PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */ -#define PLLBR_VAL 0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */ -#define MCKR_VAL 0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */ +#define CONFIG_SYS_PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */ /* sdram */ -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR_VAL 0x21914159 /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000080 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x21914159 /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ #else #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index cbbdb0c..fb10616 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -49,33 +49,33 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 /* flash */ -#define MC_PUIA_VAL 0x00000000 -#define MC_PUP_VAL 0x00000000 -#define MC_PUER_VAL 0x00000000 -#define MC_ASR_VAL 0x00000000 -#define MC_AASR_VAL 0x00000000 -#define EBI_CFGR_VAL 0x00000000 -#define SMC_CSR0_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ +#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 +#define CONFIG_SYS_MC_PUP_VAL 0x00000000 +#define CONFIG_SYS_MC_PUER_VAL 0x00000000 +#define CONFIG_SYS_MC_ASR_VAL 0x00000000 +#define CONFIG_SYS_MC_AASR_VAL 0x00000000 +#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 +#define CONFIG_SYS_SMC_CSR0_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ /* clocks */ -#define PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */ -#define PLLBR_VAL 0x1048bE0E /* 48 MHz (divider by 2 for USB) */ -#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */ +#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */ +#define CONFIG_SYS_PLLBR_VAL 0x1048bE0E /* 48 MHz (divider by 2 for USB) */ +#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */ /* sdram */ -#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define PIOC_BSR_VAL 0x00000000 -#define PIOC_PDR_VAL 0xFFFF0000 -#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define SDRC_CR_VAL 0x3211295A /* set up the SDRAM */ -#define SDRAM 0x20000000 /* address of the SDRAM */ -#define SDRAM1 0x20000020 /* address of the SDRAM */ -#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define SDRC_MR_VAL1 0x00000004 /* refresh */ -#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 +#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 +#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_CR_VAL 0x3211295A /* set up the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM1 0x20000020 /* address of the CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ +#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ +#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ #else #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ |