diff options
Diffstat (limited to 'include')
103 files changed, 7353 insertions, 366 deletions
diff --git a/include/405_mal.h b/include/405_mal.h index 0598586..2a42184 100644 --- a/include/405_mal.h +++ b/include/405_mal.h @@ -92,7 +92,7 @@ #define MAL_ESR_PBEI 0x00000001 /* ^^ ^^ */ /* Mal IER */ -#ifdef CONFIG_440SPE +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define MAL_IER_PT 0x00000080 #define MAL_IER_PRE 0x00000040 #define MAL_IER_PWE 0x00000020 diff --git a/include/440_i2c.h b/include/440_i2c.h index 9c90a9e..0c2bf36 100644 --- a/include/440_i2c.h +++ b/include/440_i2c.h @@ -1,7 +1,8 @@ #ifndef _440_i2c_h_ #define _440_i2c_h_ -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700) #else #define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400) diff --git a/include/_exports.h b/include/_exports.h index 61dcaaf..2b8ec3d 100644 --- a/include/_exports.h +++ b/include/_exports.h @@ -12,6 +12,9 @@ EXPORT_FUNC(udelay) EXPORT_FUNC(get_timer) EXPORT_FUNC(vprintf) EXPORT_FUNC(do_reset) +EXPORT_FUNC(getenv) +EXPORT_FUNC(setenv) +EXPORT_FUNC(simple_strtoul) #if (CONFIG_COMMANDS & CFG_CMD_I2C) EXPORT_FUNC(i2c_write) EXPORT_FUNC(i2c_read) diff --git a/include/ahci.h b/include/ahci.h new file mode 100644 index 0000000..80701e2 --- /dev/null +++ b/include/ahci.h @@ -0,0 +1,190 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * Author: Jason Jin<Jason.jin@freescale.com> + * Zhang Wei<wei.zhang@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#ifndef _AHCI_H_ +#define _AHCI_H_ + +#define AHCI_PCI_BAR 0x24 +#define AHCI_MAX_SG 56 /* hardware max is 64K */ +#define AHCI_CMD_SLOT_SZ 32 +#define AHCI_RX_FIS_SZ 256 +#define AHCI_CMD_TBL_HDR 0x80 +#define AHCI_CMD_TBL_CDB 0x40 +#define AHCI_CMD_TBL_SZ AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16) +#define AHCI_PORT_PRIV_DMA_SZ AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ \ + + AHCI_RX_FIS_SZ +#define AHCI_CMD_ATAPI (1 << 5) +#define AHCI_CMD_WRITE (1 << 6) +#define AHCI_CMD_PREFETCH (1 << 7) +#define AHCI_CMD_RESET (1 << 8) +#define AHCI_CMD_CLR_BUSY (1 << 10) + +#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */ + +/* Global controller registers */ +#define HOST_CAP 0x00 /* host capabilities */ +#define HOST_CTL 0x04 /* global host control */ +#define HOST_IRQ_STAT 0x08 /* interrupt status */ +#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */ +#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */ + +/* HOST_CTL bits */ +#define HOST_RESET (1 << 0) /* reset controller; self-clear */ +#define HOST_IRQ_EN (1 << 1) /* global IRQ enable */ +#define HOST_AHCI_EN (1 << 31) /* AHCI enabled */ + +/* Registers for each SATA port */ +#define PORT_LST_ADDR 0x00 /* command list DMA addr */ +#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */ +#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */ +#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */ +#define PORT_IRQ_STAT 0x10 /* interrupt status */ +#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */ +#define PORT_CMD 0x18 /* port command */ +#define PORT_TFDATA 0x20 /* taskfile data */ +#define PORT_SIG 0x24 /* device TF signature */ +#define PORT_CMD_ISSUE 0x38 /* command issue */ +#define PORT_SCR 0x28 /* SATA phy register block */ +#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */ +#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */ +#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */ +#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */ + +/* PORT_IRQ_{STAT,MASK} bits */ +#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */ +#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */ +#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */ +#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */ +#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */ +#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */ +#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */ +#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */ + +#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */ +#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */ +#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */ +#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */ +#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */ +#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */ +#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */ +#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */ +#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */ + +#define PORT_IRQ_FATAL PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_ERR \ + | PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_ERR + +#define DEF_PORT_IRQ PORT_IRQ_FATAL | PORT_IRQ_PHYRDY \ + | PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE \ + | PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS \ + | PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS \ + | PORT_IRQ_D2H_REG_FIS + +/* PORT_CMD bits */ +#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */ +#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */ +#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */ +#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */ +#define PORT_CMD_CLO (1 << 3) /* Command list override */ +#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */ +#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */ +#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */ + +#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */ +#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */ +#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */ + +#define AHCI_MAX_PORTS 32 + +/* SETFEATURES stuff */ +#define SETFEATURES_XFER 0x03 +#define XFER_UDMA_7 0x47 +#define XFER_UDMA_6 0x46 +#define XFER_UDMA_5 0x45 +#define XFER_UDMA_4 0x44 +#define XFER_UDMA_3 0x43 +#define XFER_UDMA_2 0x42 +#define XFER_UDMA_1 0x41 +#define XFER_UDMA_0 0x40 +#define XFER_MW_DMA_2 0x22 +#define XFER_MW_DMA_1 0x21 +#define XFER_MW_DMA_0 0x20 +#define XFER_SW_DMA_2 0x12 +#define XFER_SW_DMA_1 0x11 +#define XFER_SW_DMA_0 0x10 +#define XFER_PIO_4 0x0C +#define XFER_PIO_3 0x0B +#define XFER_PIO_2 0x0A +#define XFER_PIO_1 0x09 +#define XFER_PIO_0 0x08 +#define XFER_PIO_SLOW 0x00 + +#define ATA_FLAG_SATA (1 << 3) +#define ATA_FLAG_NO_LEGACY (1 << 4) /* no legacy mode check */ +#define ATA_FLAG_MMIO (1 << 6) /* use MMIO, not PIO */ +#define ATA_FLAG_SATA_RESET (1 << 7) /* (obsolete) use COMRESET */ +#define ATA_FLAG_PIO_DMA (1 << 8) /* PIO cmds via DMA */ +#define ATA_FLAG_NO_ATAPI (1 << 11) /* No ATAPI support */ + +struct ahci_cmd_hdr { + u32 opts; + u32 status; + u32 tbl_addr; + u32 tbl_addr_hi; + u32 reserved[4]; +}; + +struct ahci_sg { + u32 addr; + u32 addr_hi; + u32 reserved; + u32 flags_size; +}; + +struct ahci_ioports { + u32 cmd_addr; + u32 scr_addr; + u32 port_mmio; + struct ahci_cmd_hdr *cmd_slot; + struct ahci_sg *cmd_tbl_sg; + u32 cmd_tbl; + u32 rx_fis; +}; + +struct ahci_probe_ent { + pci_dev_t dev; + struct ahci_ioports port[AHCI_MAX_PORTS]; + u32 n_ports; + u32 hard_port_no; + u32 host_flags; + u32 host_set_flags; + u32 mmio_base; + u32 pio_mask; + u32 udma_mask; + u32 flags; + u32 cap; /* cache of HOST_CAP register */ + u32 port_map; /* cache of HOST_PORTS_IMPL reg */ + u32 link_port_map; /*linkup port map*/ +}; + +#endif diff --git a/include/arm925t.h b/include/arm925t.h index ab343ea..3d767b3 100644 --- a/include/arm925t.h +++ b/include/arm925t.h @@ -6,10 +6,6 @@ #ifndef __ARM925T_H__ #define __ARM925T_H__ -void gpioreserve(ushort mask); -void gpiosetdir(ushort mask, ushort in); -void gpiosetout(ushort mask, ushort out); -void gpioinit(void); void archflashwp(void *archdata, int wp); #endif /*__ARM925T_H__*/ diff --git a/include/asm-avr32/addrspace.h b/include/asm-avr32/addrspace.h new file mode 100644 index 0000000..b2ba1ee --- /dev/null +++ b/include/asm-avr32/addrspace.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_ADDRSPACE_H +#define __ASM_AVR32_ADDRSPACE_H + +/* Memory segments when segmentation is enabled */ +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 + +/* Returns the privileged segment base of a given address */ +#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) + +/* Returns the physical address of a PnSEG (n=1,2) address */ +#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) + +/* + * Map an address to a certain privileged segment + */ +#define P1SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG)) +#define P2SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG)) +#define P3SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG)) +#define P4SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG)) + +#endif /* __ASM_AVR32_ADDRSPACE_H */ diff --git a/include/asm-avr32/arch-at32ap7000/hmatrix2.h b/include/asm-avr32/arch-at32ap7000/hmatrix2.h new file mode 100644 index 0000000..e6df4b7 --- /dev/null +++ b/include/asm-avr32/arch-at32ap7000/hmatrix2.h @@ -0,0 +1,232 @@ +/* + * Register definition for the High-speed Bus Matrix + */ +#ifndef __ASM_AVR32_HMATRIX2_H__ +#define __ASM_AVR32_HMATRIX2_H__ + +/* HMATRIX2 register offsets */ +#define HMATRIX2_MCFG0 0x0000 +#define HMATRIX2_MCFG1 0x0004 +#define HMATRIX2_MCFG2 0x0008 +#define HMATRIX2_MCFG3 0x000c +#define HMATRIX2_MCFG4 0x0010 +#define HMATRIX2_MCFG5 0x0014 +#define HMATRIX2_MCFG6 0x0018 +#define HMATRIX2_MCFG7 0x001c +#define HMATRIX2_MCFG8 0x0020 +#define HMATRIX2_MCFG9 0x0024 +#define HMATRIX2_MCFG10 0x0028 +#define HMATRIX2_MCFG11 0x002c +#define HMATRIX2_MCFG12 0x0030 +#define HMATRIX2_MCFG13 0x0034 +#define HMATRIX2_MCFG14 0x0038 +#define HMATRIX2_MCFG15 0x003c +#define HMATRIX2_SCFG0 0x0040 +#define HMATRIX2_SCFG1 0x0044 +#define HMATRIX2_SCFG2 0x0048 +#define HMATRIX2_SCFG3 0x004c +#define HMATRIX2_SCFG4 0x0050 +#define HMATRIX2_SCFG5 0x0054 +#define HMATRIX2_SCFG6 0x0058 +#define HMATRIX2_SCFG7 0x005c +#define HMATRIX2_SCFG8 0x0060 +#define HMATRIX2_SCFG9 0x0064 +#define HMATRIX2_SCFG10 0x0068 +#define HMATRIX2_SCFG11 0x006c +#define HMATRIX2_SCFG12 0x0070 +#define HMATRIX2_SCFG13 0x0074 +#define HMATRIX2_SCFG14 0x0078 +#define HMATRIX2_SCFG15 0x007c +#define HMATRIX2_PRAS0 0x0080 +#define HMATRIX2_PRBS0 0x0084 +#define HMATRIX2_PRAS1 0x0088 +#define HMATRIX2_PRBS1 0x008c +#define HMATRIX2_PRAS2 0x0090 +#define HMATRIX2_PRBS2 0x0094 +#define HMATRIX2_PRAS3 0x0098 +#define HMATRIX2_PRBS3 0x009c +#define HMATRIX2_PRAS4 0x00a0 +#define HMATRIX2_PRBS4 0x00a4 +#define HMATRIX2_PRAS5 0x00a8 +#define HMATRIX2_PRBS5 0x00ac +#define HMATRIX2_PRAS6 0x00b0 +#define HMATRIX2_PRBS6 0x00b4 +#define HMATRIX2_PRAS7 0x00b8 +#define HMATRIX2_PRBS7 0x00bc +#define HMATRIX2_PRAS8 0x00c0 +#define HMATRIX2_PRBS8 0x00c4 +#define HMATRIX2_PRAS9 0x00c8 +#define HMATRIX2_PRBS9 0x00cc +#define HMATRIX2_PRAS10 0x00d0 +#define HMATRIX2_PRBS10 0x00d4 +#define HMATRIX2_PRAS11 0x00d8 +#define HMATRIX2_PRBS11 0x00dc +#define HMATRIX2_PRAS12 0x00e0 +#define HMATRIX2_PRBS12 0x00e4 +#define HMATRIX2_PRAS13 0x00e8 +#define HMATRIX2_PRBS13 0x00ec +#define HMATRIX2_PRAS14 0x00f0 +#define HMATRIX2_PRBS14 0x00f4 +#define HMATRIX2_PRAS15 0x00f8 +#define HMATRIX2_PRBS15 0x00fc +#define HMATRIX2_MRCR 0x0100 +#define HMATRIX2_SFR0 0x0110 +#define HMATRIX2_SFR1 0x0114 +#define HMATRIX2_SFR2 0x0118 +#define HMATRIX2_SFR3 0x011c +#define HMATRIX2_SFR4 0x0120 +#define HMATRIX2_SFR5 0x0124 +#define HMATRIX2_SFR6 0x0128 +#define HMATRIX2_SFR7 0x012c +#define HMATRIX2_SFR8 0x0130 +#define HMATRIX2_SFR9 0x0134 +#define HMATRIX2_SFR10 0x0138 +#define HMATRIX2_SFR11 0x013c +#define HMATRIX2_SFR12 0x0140 +#define HMATRIX2_SFR13 0x0144 +#define HMATRIX2_SFR14 0x0148 +#define HMATRIX2_SFR15 0x014c +#define HMATRIX2_VERSION 0x01fc + +/* Bitfields in MCFG0 */ +#define HMATRIX2_ULBT_OFFSET 0 +#define HMATRIX2_ULBT_SIZE 3 + +/* Bitfields in SCFG0 */ +#define HMATRIX2_SLOT_CYCLE_OFFSET 0 +#define HMATRIX2_SLOT_CYCLE_SIZE 8 +#define HMATRIX2_DEFMSTR_TYPE_OFFSET 16 +#define HMATRIX2_DEFMSTR_TYPE_SIZE 2 +#define HMATRIX2_FIXED_DEFMSTR_OFFSET 18 +#define HMATRIX2_FIXED_DEFMSTR_SIZE 4 +#define HMATRIX2_ARBT_OFFSET 24 +#define HMATRIX2_ARBT_SIZE 2 + +/* Bitfields in PRAS0 */ +#define HMATRIX2_M0PR_OFFSET 0 +#define HMATRIX2_M0PR_SIZE 4 +#define HMATRIX2_M1PR_OFFSET 4 +#define HMATRIX2_M1PR_SIZE 4 +#define HMATRIX2_M2PR_OFFSET 8 +#define HMATRIX2_M2PR_SIZE 4 +#define HMATRIX2_M3PR_OFFSET 12 +#define HMATRIX2_M3PR_SIZE 4 +#define HMATRIX2_M4PR_OFFSET 16 +#define HMATRIX2_M4PR_SIZE 4 +#define HMATRIX2_M5PR_OFFSET 20 +#define HMATRIX2_M5PR_SIZE 4 +#define HMATRIX2_M6PR_OFFSET 24 +#define HMATRIX2_M6PR_SIZE 4 +#define HMATRIX2_M7PR_OFFSET 28 +#define HMATRIX2_M7PR_SIZE 4 + +/* Bitfields in PRBS0 */ +#define HMATRIX2_M8PR_OFFSET 0 +#define HMATRIX2_M8PR_SIZE 4 +#define HMATRIX2_M9PR_OFFSET 4 +#define HMATRIX2_M9PR_SIZE 4 +#define HMATRIX2_M10PR_OFFSET 8 +#define HMATRIX2_M10PR_SIZE 4 +#define HMATRIX2_M11PR_OFFSET 12 +#define HMATRIX2_M11PR_SIZE 4 +#define HMATRIX2_M12PR_OFFSET 16 +#define HMATRIX2_M12PR_SIZE 4 +#define HMATRIX2_M13PR_OFFSET 20 +#define HMATRIX2_M13PR_SIZE 4 +#define HMATRIX2_M14PR_OFFSET 24 +#define HMATRIX2_M14PR_SIZE 4 +#define HMATRIX2_M15PR_OFFSET 28 +#define HMATRIX2_M15PR_SIZE 4 + +/* Bitfields in MRCR */ +#define HMATRIX2_RBC0_OFFSET 0 +#define HMATRIX2_RBC0_SIZE 1 +#define HMATRIX2_RBC1_OFFSET 1 +#define HMATRIX2_RBC1_SIZE 1 +#define HMATRIX2_RBC2_OFFSET 2 +#define HMATRIX2_RBC2_SIZE 1 +#define HMATRIX2_RBC3_OFFSET 3 +#define HMATRIX2_RBC3_SIZE 1 +#define HMATRIX2_RBC4_OFFSET 4 +#define HMATRIX2_RBC4_SIZE 1 +#define HMATRIX2_RBC5_OFFSET 5 +#define HMATRIX2_RBC5_SIZE 1 +#define HMATRIX2_RBC6_OFFSET 6 +#define HMATRIX2_RBC6_SIZE 1 +#define HMATRIX2_RBC7_OFFSET 7 +#define HMATRIX2_RBC7_SIZE 1 +#define HMATRIX2_RBC8_OFFSET 8 +#define HMATRIX2_RBC8_SIZE 1 +#define HMATRIX2_RBC9_OFFSET 9 +#define HMATRIX2_RBC9_SIZE 1 +#define HMATRIX2_RBC10_OFFSET 10 +#define HMATRIX2_RBC10_SIZE 1 +#define HMATRIX2_RBC11_OFFSET 11 +#define HMATRIX2_RBC11_SIZE 1 +#define HMATRIX2_RBC12_OFFSET 12 +#define HMATRIX2_RBC12_SIZE 1 +#define HMATRIX2_RBC13_OFFSET 13 +#define HMATRIX2_RBC13_SIZE 1 +#define HMATRIX2_RBC14_OFFSET 14 +#define HMATRIX2_RBC14_SIZE 1 +#define HMATRIX2_RBC15_OFFSET 15 +#define HMATRIX2_RBC15_SIZE 1 + +/* Bitfields in SFR0 */ +#define HMATRIX2_SFR_OFFSET 0 +#define HMATRIX2_SFR_SIZE 32 + +/* Bitfields in SFR4 */ +#define HMATRIX2_CS1A_OFFSET 1 +#define HMATRIX2_CS1A_SIZE 1 +#define HMATRIX2_CS3A_OFFSET 3 +#define HMATRIX2_CS3A_SIZE 1 +#define HMATRIX2_CS4A_OFFSET 4 +#define HMATRIX2_CS4A_SIZE 1 +#define HMATRIX2_CS5A_OFFSET 5 +#define HMATRIX2_CS5A_SIZE 1 +#define HMATRIX2_DBPUC_OFFSET 8 +#define HMATRIX2_DBPUC_SIZE 1 + +/* Bitfields in VERSION */ +#define HMATRIX2_VERSION_OFFSET 0 +#define HMATRIX2_VERSION_SIZE 12 +#define HMATRIX2_MFN_OFFSET 16 +#define HMATRIX2_MFN_SIZE 3 + +/* Constants for ULBT */ +#define HMATRIX2_ULBT_INFINITE 0 +#define HMATRIX2_ULBT_SINGLE 1 +#define HMATRIX2_ULBT_FOUR_BEAT 2 +#define HMATRIX2_ULBT_SIXTEEN_BEAT 4 + +/* Constants for DEFMSTR_TYPE */ +#define HMATRIX2_DEFMSTR_TYPE_NO_DEFAULT 0 +#define HMATRIX2_DEFMSTR_TYPE_LAST_DEFAULT 1 +#define HMATRIX2_DEFMSTR_TYPE_FIXED_DEFAULT 2 + +/* Constants for ARBT */ +#define HMATRIX2_ARBT_ROUND_ROBIN 0 +#define HMATRIX2_ARBT_FIXED_PRIORITY 1 + +/* Bit manipulation macros */ +#define HMATRIX2_BIT(name) \ + (1 << HMATRIX2_##name##_OFFSET) +#define HMATRIX2_BF(name,value) \ + (((value) & ((1 << HMATRIX2_##name##_SIZE) - 1)) \ + << HMATRIX2_##name##_OFFSET) +#define HMATRIX2_BFEXT(name,value) \ + (((value) >> HMATRIX2_##name##_OFFSET) \ + & ((1 << HMATRIX2_##name##_SIZE) - 1)) +#define HMATRIX2_BFINS(name,value,old) \ + (((old) & ~(((1 << HMATRIX2_##name##_SIZE) - 1) \ + << HMATRIX2_##name##_OFFSET)) \ + | HMATRIX2_BF(name,value)) + +/* Register access macros */ +#define hmatrix2_readl(port,reg) \ + readl((port)->regs + HMATRIX2_##reg) +#define hmatrix2_writel(port,reg,value) \ + writel((value), (port)->regs + HMATRIX2_##reg) + +#endif /* __ASM_AVR32_HMATRIX2_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/memory-map.h b/include/asm-avr32/arch-at32ap7000/memory-map.h new file mode 100644 index 0000000..8ffe851 --- /dev/null +++ b/include/asm-avr32/arch-at32ap7000/memory-map.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_PART_MEMORY_MAP_H__ +#define __ASM_AVR32_PART_MEMORY_MAP_H__ + +#define AUDIOC_BASE 0xFFF02800 +#define DAC_BASE 0xFFF02000 +#define DMAC_BASE 0xFF200000 +#define ECC_BASE 0xFFF03C00 +#define HISI_BASE 0xFFF02C00 +#define HMATRIX_BASE 0xFFF00800 +#define HSDRAMC_BASE 0xFFF03800 +#define HSMC_BASE 0xFFF03400 +#define LCDC_BASE 0xFF000000 +#define MACB0_BASE 0xFFF01800 +#define MACB1_BASE 0xFFF01C00 +#define MMCI_BASE 0xFFF02400 +#define PIOA_BASE 0xFFE02800 +#define PIOB_BASE 0xFFE02C00 +#define PIOC_BASE 0xFFE03000 +#define PIOD_BASE 0xFFE03400 +#define PIOE_BASE 0xFFE03800 +#define PSIF_BASE 0xFFE03C00 +#define PWM_BASE 0xFFF01400 +#define SM_BASE 0xFFF00000 +#define INTC_BASE 0XFFF00400 +#define SPI0_BASE 0xFFE00000 +#define SPI1_BASE 0xFFE00400 +#define SSC0_BASE 0xFFE01C00 +#define SSC1_BASE 0xFFE02000 +#define SSC2_BASE 0xFFE02400 +#define TIMER0_BASE 0xFFF00C00 +#define TIMER1_BASE 0xFFF01000 +#define TWI_BASE 0xFFE00800 +#define USART0_BASE 0xFFE00C00 +#define USART1_BASE 0xFFE01000 +#define USART2_BASE 0xFFE01400 +#define USART3_BASE 0xFFE01800 +#define USB_FIFO 0xFF300000 +#define USB_BASE 0xFFF03000 + +#endif /* __ASM_AVR32_PART_MEMORY_MAP_H__ */ diff --git a/include/asm-avr32/arch-at32ap7000/platform.h b/include/asm-avr32/arch-at32ap7000/platform.h new file mode 100644 index 0000000..7590501 --- /dev/null +++ b/include/asm-avr32/arch-at32ap7000/platform.h @@ -0,0 +1,146 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _ASM_AVR32_ARCH_PM_H +#define _ASM_AVR32_ARCH_PM_H + +#include <config.h> + +enum clock_domain_id { + CLOCK_CPU, + CLOCK_HSB, + CLOCK_PBA, + CLOCK_PBB, + NR_CLOCK_DOMAINS, +}; + +enum resource_type { + RESOURCE_GPIO, + RESOURCE_CLOCK, +}; + +enum gpio_func { + GPIO_FUNC_GPIO, + GPIO_FUNC_A, + GPIO_FUNC_B, +}; + +enum device_id { + DEVICE_HEBI, + DEVICE_PBA_BRIDGE, + DEVICE_PBB_BRIDGE, + DEVICE_HRAMC, + /* GPIO controllers must be kept together */ + DEVICE_PIOA, + DEVICE_PIOB, + DEVICE_PIOC, + DEVICE_PIOD, + DEVICE_PIOE, + DEVICE_SM, + DEVICE_INTC, + DEVICE_HMATRIX, +#if defined(CFG_HPDC) + DEVICE_HPDC, +#endif +#if defined(CFG_MACB0) + DEVICE_MACB0, +#endif +#if defined(CFG_MACB1) + DEVICE_MACB1, +#endif +#if defined(CFG_LCDC) + DEVICE_LCDC, +#endif +#if defined(CFG_USART0) + DEVICE_USART0, +#endif +#if defined(CFG_USART1) + DEVICE_USART1, +#endif +#if defined(CFG_USART2) + DEVICE_USART2, +#endif +#if defined(CFG_USART3) + DEVICE_USART3, +#endif +#if defined(CFG_MMCI) + DEVICE_MMCI, +#endif +#if defined(CFG_DMAC) + DEVICE_DMAC, +#endif + NR_DEVICES, + NO_DEVICE = -1, +}; + +struct resource { + enum resource_type type; + union { + struct { + unsigned long base; + } iomem; + struct { + unsigned char nr_pins; + enum device_id gpio_dev; + enum gpio_func func; + unsigned short start; + } gpio; + struct { + enum clock_domain_id id; + unsigned char index; + } clock; + } u; +}; + +struct device { + void *regs; + unsigned int nr_resources; + const struct resource *resource; +}; + +struct clock_domain { + unsigned short reg; + enum clock_domain_id id; + enum device_id bridge; +}; + +extern const struct device chip_device[NR_DEVICES]; +extern const struct clock_domain chip_clock[NR_CLOCK_DOMAINS]; + +/** + * Set up PIO, clock management and I/O memory for a device. + */ +const struct device *get_device(enum device_id devid); +void put_device(const struct device *dev); + +int gpio_set_func(enum device_id gpio_devid, unsigned int start, + unsigned int nr_pins, enum gpio_func func); +void gpio_free(enum device_id gpio_devid, unsigned int start, + unsigned int nr_pins); + +void pm_init(void); +int pm_enable_clock(enum clock_domain_id id, unsigned int index); +void pm_disable_clock(enum clock_domain_id id, unsigned int index); +unsigned long pm_get_clock_freq(enum clock_domain_id domain); + +void cpu_enable_sdram(void); + +#endif /* _ASM_AVR32_ARCH_PM_H */ diff --git a/include/asm-avr32/bitops.h b/include/asm-avr32/bitops.h new file mode 100644 index 0000000..f15fd46 --- /dev/null +++ b/include/asm-avr32/bitops.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_BITOPS_H +#define __ASM_AVR32_BITOPS_H + +#endif /* __ASM_AVR32_BITOPS_H */ diff --git a/include/asm-avr32/byteorder.h b/include/asm-avr32/byteorder.h new file mode 100644 index 0000000..2fe867e --- /dev/null +++ b/include/asm-avr32/byteorder.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_BYTEORDER_H +#define __ASM_AVR32_BYTEORDER_H + +#include <asm/types.h> + +#define __arch__swab32(x) __builtin_bswap_32(x) +#define __arch__swab16(x) __builtin_bswap_16(x) + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#include <linux/byteorder/big_endian.h> + +#endif /* __ASM_AVR32_BYTEORDER_H */ diff --git a/include/asm-avr32/cacheflush.h b/include/asm-avr32/cacheflush.h new file mode 100644 index 0000000..929f68e --- /dev/null +++ b/include/asm-avr32/cacheflush.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_CACHEFLUSH_H +#define __ASM_AVR32_CACHEFLUSH_H + +/* + * Invalidate any cacheline containing virtual address vaddr without + * writing anything back to memory. + * + * Note that this function may corrupt unrelated data structures when + * applied on buffers that are not cacheline aligned in both ends. + */ +static inline void dcache_invalidate_line(volatile void *vaddr) +{ + asm volatile("cache %0[0], 0x0b" : : "r"(vaddr) : "memory"); +} + +/* + * Make sure any cacheline containing virtual address vaddr is written + * to memory. + */ +static inline void dcache_clean_line(volatile void *vaddr) +{ + asm volatile("cache %0[0], 0x0c" : : "r"(vaddr) : "memory"); +} + +/* + * Make sure any cacheline containing virtual address vaddr is written + * to memory and then invalidate it. + */ +static inline void dcache_flush_line(volatile void *vaddr) +{ + asm volatile("cache %0[0], 0x0d" : : "r"(vaddr) : "memory"); +} + +/* + * Invalidate any instruction cacheline containing virtual address + * vaddr. + */ +static inline void icache_invalidate_line(volatile void *vaddr) +{ + asm volatile("cache %0[0], 0x01" : : "r"(vaddr) : "memory"); +} + +/* + * Applies the above functions on all lines that are touched by the + * specified virtual address range. + */ +void dcache_invalidate_range(volatile void *start, size_t len); +void dcache_clean_range(volatile void *start, size_t len); +void dcache_flush_range(volatile void *start, size_t len); +void icache_invalidate_range(volatile void *start, size_t len); + +static inline void dcache_flush_unlocked(void) +{ + asm volatile("cache %0[5], 0x08" : : "r"(0) : "memory"); +} + +/* + * Make sure any pending writes are completed before continuing. + */ +#define sync_write_buffer() asm volatile("sync 0" : : : "memory") + +#endif /* __ASM_AVR32_CACHEFLUSH_H */ diff --git a/include/asm-avr32/div64.h b/include/asm-avr32/div64.h new file mode 100644 index 0000000..2e0ba83 --- /dev/null +++ b/include/asm-avr32/div64.h @@ -0,0 +1,39 @@ +#ifndef _ASM_GENERIC_DIV64_H +#define _ASM_GENERIC_DIV64_H +/* + * Copyright (C) 2003 Bernardo Innocenti <bernie@develer.com> + * Based on former asm-ppc/div64.h and asm-m68knommu/div64.h + * + * The semantics of do_div() are: + * + * uint32_t do_div(uint64_t *n, uint32_t base) + * { + * uint32_t remainder = *n % base; + * *n = *n / base; + * return remainder; + * } + * + * NOTE: macro parameter n is evaluated multiple times, + * beware of side effects! + */ + +#include <linux/types.h> + +extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor); + +/* The unnecessary pointer compare is there + * to check for type safety (n must be 64bit) + */ +# define do_div(n,base) ({ \ + uint32_t __base = (base); \ + uint32_t __rem; \ + (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \ + if (((n) >> 32) == 0) { \ + __rem = (uint32_t)(n) % __base; \ + (n) = (uint32_t)(n) / __base; \ + } else \ + __rem = __div64_32(&(n), __base); \ + __rem; \ + }) + +#endif /* _ASM_GENERIC_DIV64_H */ diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h new file mode 100644 index 0000000..3b46fa3 --- /dev/null +++ b/include/asm-avr32/dma-mapping.h @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_DMA_MAPPING_H +#define __ASM_AVR32_DMA_MAPPING_H + +#include <asm/io.h> +#include <asm/cacheflush.h> + +enum dma_data_direction { + DMA_BIDIRECTIONAL = 0, + DMA_TO_DEVICE = 1, + DMA_FROM_DEVICE = 2, +}; +extern void *dma_alloc_coherent(size_t len, unsigned long *handle); + +static inline unsigned long dma_map_single(volatile void *vaddr, size_t len, + enum dma_data_direction dir) +{ + extern void __bad_dma_data_direction(void); + + switch (dir) { + case DMA_BIDIRECTIONAL: + dcache_flush_range(vaddr, len); + break; + case DMA_TO_DEVICE: + dcache_clean_range(vaddr, len); + break; + case DMA_FROM_DEVICE: + dcache_invalidate_range(vaddr, len); + break; + default: + /* This will cause a linker error */ + __bad_dma_data_direction(); + } + + return virt_to_phys(vaddr); +} + +static inline void dma_unmap_single(volatile void *vaddr, size_t len, + unsigned long paddr) +{ + +} + +#endif /* __ASM_AVR32_DMA_MAPPING_H */ diff --git a/include/asm-avr32/errno.h b/include/asm-avr32/errno.h new file mode 100644 index 0000000..ea3506f --- /dev/null +++ b/include/asm-avr32/errno.h @@ -0,0 +1,132 @@ +#ifndef _ASM_AVR32_ERRNO_H +#define _ASM_AVR32_ERRNO_H + +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Argument list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ +#define ECHILD 10 /* No child processes */ +#define EAGAIN 11 /* Try again */ +#define ENOMEM 12 /* Out of memory */ +#define EACCES 13 /* Permission denied */ +#define EFAULT 14 /* Bad address */ +#define ENOTBLK 15 /* Block device required */ +#define EBUSY 16 /* Device or resource busy */ +#define EEXIST 17 /* File exists */ +#define EXDEV 18 /* Cross-device link */ +#define ENODEV 19 /* No such device */ +#define ENOTDIR 20 /* Not a directory */ +#define EISDIR 21 /* Is a directory */ +#define EINVAL 22 /* Invalid argument */ +#define ENFILE 23 /* File table overflow */ +#define EMFILE 24 /* Too many open files */ +#define ENOTTY 25 /* Not a typewriter */ +#define ETXTBSY 26 /* Text file busy */ +#define EFBIG 27 /* File too large */ +#define ENOSPC 28 /* No space left on device */ +#define ESPIPE 29 /* Illegal seek */ +#define EROFS 30 /* Read-only file system */ +#define EMLINK 31 /* Too many links */ +#define EPIPE 32 /* Broken pipe */ +#define EDOM 33 /* Math argument out of domain of func */ +#define ERANGE 34 /* Math result not representable */ +#define EDEADLK 35 /* Resource deadlock would occur */ +#define ENAMETOOLONG 36 /* File name too long */ +#define ENOLCK 37 /* No record locks available */ +#define ENOSYS 38 /* Function not implemented */ +#define ENOTEMPTY 39 /* Directory not empty */ +#define ELOOP 40 /* Too many symbolic links encountered */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define ENOMSG 42 /* No message of desired type */ +#define EIDRM 43 /* Identifier removed */ +#define ECHRNG 44 /* Channel number out of range */ +#define EL2NSYNC 45 /* Level 2 not synchronized */ +#define EL3HLT 46 /* Level 3 halted */ +#define EL3RST 47 /* Level 3 reset */ +#define ELNRNG 48 /* Link number out of range */ +#define EUNATCH 49 /* Protocol driver not attached */ +#define ENOCSI 50 /* No CSI structure available */ +#define EL2HLT 51 /* Level 2 halted */ +#define EBADE 52 /* Invalid exchange */ +#define EBADR 53 /* Invalid request descriptor */ +#define EXFULL 54 /* Exchange full */ +#define ENOANO 55 /* No anode */ +#define EBADRQC 56 /* Invalid request code */ +#define EBADSLT 57 /* Invalid slot */ + +#define EDEADLOCK EDEADLK + +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EMULTIHOP 72 /* Multihop attempted */ +#define EDOTDOT 73 /* RFS specific error */ +#define EBADMSG 74 /* Not a data message */ +#define EOVERFLOW 75 /* Value too large for defined data type */ +#define ENOTUNIQ 76 /* Name not unique on network */ +#define EBADFD 77 /* File descriptor in bad state */ +#define EREMCHG 78 /* Remote address changed */ +#define ELIBACC 79 /* Can not access a needed shared library */ +#define ELIBBAD 80 /* Accessing a corrupted shared library */ +#define ELIBSCN 81 /* .lib section in a.out corrupted */ +#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 83 /* Cannot exec a shared library directly */ +#define EILSEQ 84 /* Illegal byte sequence */ +#define ERESTART 85 /* Interrupted system call should be restarted */ +#define ESTRPIPE 86 /* Streams pipe error */ +#define EUSERS 87 /* Too many users */ +#define ENOTSOCK 88 /* Socket operation on non-socket */ +#define EDESTADDRREQ 89 /* Destination address required */ +#define EMSGSIZE 90 /* Message too long */ +#define EPROTOTYPE 91 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 92 /* Protocol not available */ +#define EPROTONOSUPPORT 93 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ +#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 96 /* Protocol family not supported */ +#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ +#define EADDRINUSE 98 /* Address already in use */ +#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ +#define ENETDOWN 100 /* Network is down */ +#define ENETUNREACH 101 /* Network is unreachable */ +#define ENETRESET 102 /* Network dropped connection because of reset */ +#define ECONNABORTED 103 /* Software caused connection abort */ +#define ECONNRESET 104 /* Connection reset by peer */ +#define ENOBUFS 105 /* No buffer space available */ +#define EISCONN 106 /* Transport endpoint is already connected */ +#define ENOTCONN 107 /* Transport endpoint is not connected */ +#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 109 /* Too many references: cannot splice */ +#define ETIMEDOUT 110 /* Connection timed out */ +#define ECONNREFUSED 111 /* Connection refused */ +#define EHOSTDOWN 112 /* Host is down */ +#define EHOSTUNREACH 113 /* No route to host */ +#define EALREADY 114 /* Operation already in progress */ +#define EINPROGRESS 115 /* Operation now in progress */ +#define ESTALE 116 /* Stale NFS file handle */ +#define EUCLEAN 117 /* Structure needs cleaning */ +#define ENOTNAM 118 /* Not a XENIX named type file */ +#define ENAVAIL 119 /* No XENIX semaphores available */ +#define EISNAM 120 /* Is a named type file */ +#define EREMOTEIO 121 /* Remote I/O error */ +#define EDQUOT 122 /* Quota exceeded */ + +#define ENOMEDIUM 123 /* No medium found */ +#define EMEDIUMTYPE 124 /* Wrong medium type */ + +#endif /* _ASM_AVR32_ERRNO_H */ diff --git a/include/asm-avr32/global_data.h b/include/asm-avr32/global_data.h new file mode 100644 index 0000000..01d836c --- /dev/null +++ b/include/asm-avr32/global_data.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_GLOBAL_DATA_H__ +#define __ASM_GLOBAL_DATA_H__ + +/* + * The following data structure is placed in some memory wich is + * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or + * some locked parts of the data cache) to allow for a minimum set of + * global variables during system initialization (until we have set + * up the memory controller so that we can use RAM). + * + * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t) + */ + +typedef struct global_data { + bd_t *bd; + unsigned long flags; + const struct device *console_uart; + const struct device *sm; + unsigned long baudrate; + unsigned long sdram_size; + unsigned long have_console; /* serial_init() was called */ + unsigned long reloc_off; /* Relocation Offset */ + unsigned long env_addr; /* Address of env struct */ + unsigned long env_valid; /* Checksum of env valid? */ + unsigned long cpu_hz; /* cpu core clock frequency */ + void **jt; /* jump table */ +} gd_t; + +/* + * Global Data Flags + */ +#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ +#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ +#define GD_FLG_SILENT 0x00004 /* Silent mode */ + +#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm("r5") + +#endif /* __ASM_GLOBAL_DATA_H__ */ diff --git a/include/asm-avr32/initcalls.h b/include/asm-avr32/initcalls.h new file mode 100644 index 0000000..7ba25cd --- /dev/null +++ b/include/asm-avr32/initcalls.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2005, 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_INITCALLS_H__ +#define __ASM_AVR32_INITCALLS_H__ + +#include <config.h> + +extern int cpu_init(void); +extern int timer_init(void); +extern void board_init_memories(void); +extern void board_init_pio(void); +extern void board_init_info(void); + +#endif /* __ASM_AVR32_INITCALLS_H__ */ diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h new file mode 100644 index 0000000..e86c456 --- /dev/null +++ b/include/asm-avr32/io.h @@ -0,0 +1,92 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_IO_H +#define __ASM_AVR32_IO_H + +#ifdef __KERNEL__ + +/* + * Generic IO read/write. These perform native-endian accesses. Note + * that some architectures will want to re-define __raw_{read,write}w. + */ +extern void __raw_writesb(unsigned int addr, const void *data, int bytelen); +extern void __raw_writesw(unsigned int addr, const void *data, int wordlen); +extern void __raw_writesl(unsigned int addr, const void *data, int longlen); + +extern void __raw_readsb(unsigned int addr, void *data, int bytelen); +extern void __raw_readsw(unsigned int addr, void *data, int wordlen); +extern void __raw_readsl(unsigned int addr, void *data, int longlen); + +#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) + +#define __raw_readb(a) (*(volatile unsigned char *)(a)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_readl(a) (*(volatile unsigned int *)(a)) + +/* As long as I/O is only performed in P4 (or possibly P3), we're safe */ +#define writeb(v,a) __raw_writeb(v,a) +#define writew(v,a) __raw_writew(v,a) +#define writel(v,a) __raw_writel(v,a) + +#define readb(a) __raw_readb(a) +#define readw(a) __raw_readw(a) +#define readl(a) __raw_readl(a) + +/* + * Bad read/write accesses... + */ +extern void __readwrite_bug(const char *fn); + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * All I/O is memory mapped, so these macros doesn't make very much sense + */ +#define outb(v,p) __raw_writeb(v, p) +#define outw(v,p) __raw_writew(cpu_to_le16(v),p) +#define outl(v,p) __raw_writel(cpu_to_le32(v),p) + +#define inb(p) ({ unsigned int __v = __raw_readb(p); __v; }) +#define inw(p) ({ unsigned int __v = __le16_to_cpu(__raw_readw(p)); __v; }) +#define inl(p) ({ unsigned int __v = __le32_to_cpu(__raw_readl(p)); __v; }) + +#include <asm/addrspace.h> + +/* virt_to_phys will only work when address is in P1 or P2 */ +static __inline__ unsigned long virt_to_phys(volatile void *address) +{ + return PHYSADDR(address); +} + +static __inline__ void * phys_to_virt(unsigned long address) +{ + return (void *)P1SEGADDR(address); +} + +#define cached(addr) ((void *)P1SEGADDR(addr)) +#define uncached(addr) ((void *)P2SEGADDR(addr)) + +#endif /* __KERNEL__ */ + +#endif /* __ASM_AVR32_IO_H */ diff --git a/include/asm-avr32/posix_types.h b/include/asm-avr32/posix_types.h new file mode 100644 index 0000000..edf1bc1 --- /dev/null +++ b/include/asm-avr32/posix_types.h @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_POSIX_TYPES_H +#define __ASM_AVR32_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_dev_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef unsigned long __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) */ + +#endif /* __ASM_AVR32_POSIX_TYPES_H */ diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h new file mode 100644 index 0000000..cc59dfa --- /dev/null +++ b/include/asm-avr32/processor.h @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_PROCESSOR_H +#define __ASM_AVR32_PROCESSOR_H + +#ifndef __ASSEMBLY__ + +#define current_text_addr() ({ void *pc; __asm__("mov %0,pc" : "=r"(pc)); pc; }) + +struct avr32_cpuinfo { + unsigned long loops_per_jiffy; +}; + +extern struct avr32_cpuinfo boot_cpu_data; + +#ifdef CONFIG_SMP +extern struct avr32_cpuinfo cpu_data[]; +#define current_cpu_data cpu_data[smp_processor_id()] +#else +#define cpu_data (&boot_cpu_data) +#define current_cpu_data boot_cpu_data +#endif + +/* TODO: Make configurable (2GB will serve as a reasonable default) */ +#define TASK_SIZE 0x80000000 + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) + +#define cpu_relax() barrier() +#define cpu_sync_pipeline() asm volatile("sub pc, -2" : : : "memory") + +/* This struct contains the CPU context as stored by switch_to() */ +struct thread_struct { + unsigned long pc; + unsigned long ksp; /* Kernel stack pointer */ + unsigned long r7; + unsigned long r6; + unsigned long r5; + unsigned long r4; + unsigned long r3; + unsigned long r2; + unsigned long r1; + unsigned long r0; +}; + +#define INIT_THREAD { \ + .ksp = sizeof(init_stack) + (long)&init_stack, \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ +#define start_thread(regs, new_pc, new_sp) \ + set_fs(USER_DS); \ + regs->sr = 0; /* User mode. */ \ + regs->gr[REG_PC] = new_pc; \ + regs->gr[REG_SP] = new_sp + +struct task_struct; + +/* Free all resources held by a thread */ +extern void release_thread(struct task_struct *); + +/* Create a kernel thread without removing it from tasklists */ +extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while(0) + +/* Return saved PC of a blocked thread */ +#define thread_saved_pc(tsk) (tsk->thread.pc) + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_AVR32_PROCESSOR_H */ diff --git a/include/asm-avr32/ptrace.h b/include/asm-avr32/ptrace.h new file mode 100644 index 0000000..c770ba0 --- /dev/null +++ b/include/asm-avr32/ptrace.h @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_PTRACE_H +#define __ASM_AVR32_PTRACE_H + +/* + * Status Register bits + */ +#define SR_H 0x40000000 +#define SR_R 0x20000000 +#define SR_J 0x10000000 +#define SR_DM 0x08000000 +#define SR_D 0x04000000 +#define MODE_NMI 0x01c00000 +#define MODE_EXCEPTION 0x01800000 +#define MODE_INT3 0x01400000 +#define MODE_INT2 0x01000000 +#define MODE_INT1 0x00c00000 +#define MODE_INT0 0x00800000 +#define MODE_SUPERVISOR 0x00400000 +#define MODE_USER 0x00000000 +#define MODE_MASK 0x01c00000 +#define SR_EM 0x00200000 +#define SR_I3M 0x00100000 +#define SR_I2M 0x00080000 +#define SR_I1M 0x00040000 +#define SR_I0M 0x00020000 +#define SR_GM 0x00010000 + +#define MODE_SHIFT 22 +#define SR_EM_BIT 21 +#define SR_I3M_BIT 20 +#define SR_I2M_BIT 19 +#define SR_I1M_BIT 18 +#define SR_I0M_BIT 17 +#define SR_GM_BIT 16 + +/* The user-visible part */ +#define SR_Q 0x00000010 +#define SR_V 0x00000008 +#define SR_N 0x00000004 +#define SR_Z 0x00000002 +#define SR_C 0x00000001 + +/* + * The order is defined by the stdsp instruction. r0 is stored first, so it + * gets the highest address. + * + * Registers 0-12 are general-purpose registers (r12 is normally used for + * the function return value). + * Register 13 is the stack pointer + * Register 14 is the link register + * Register 15 is the program counter + */ +#define FRAME_SIZE_FULL 72 +#define REG_R12_ORIG 68 +#define REG_R0 64 +#define REG_R1 60 +#define REG_R2 56 +#define REG_R3 52 +#define REG_R4 48 +#define REG_R5 44 +#define REG_R6 40 +#define REG_R7 36 +#define REG_R8 32 +#define REG_R9 28 +#define REG_R10 34 +#define REG_R11 20 +#define REG_R12 16 +#define REG_SP 12 +#define REG_LR 8 + +#define FRAME_SIZE_MIN 8 +#define REG_PC 4 +#define REG_SR 0 + +#ifndef __ASSEMBLY__ +struct pt_regs { + /* These are always saved */ + unsigned long sr; + unsigned long pc; + + /* These are sometimes saved */ + unsigned long lr; + unsigned long sp; + unsigned long r12; + unsigned long r11; + unsigned long r10; + unsigned long r9; + unsigned long r8; + unsigned long r7; + unsigned long r6; + unsigned long r5; + unsigned long r4; + unsigned long r3; + unsigned long r2; + unsigned long r1; + unsigned long r0; + + /* Only saved on system call */ + unsigned long r12_orig; +}; + +#ifdef __KERNEL__ +# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER) +# define instruction_pointer(regs) ((regs)->pc) +extern void show_regs (struct pt_regs *); + +static __inline__ int valid_user_regs(struct pt_regs *regs) +{ + /* + * Some of the Java bits might be acceptable if/when we + * implement some support for that stuff... + */ + if ((regs->sr & 0xffff0000) == 0) + return 1; + + /* + * Force status register flags to be sane and report this + * illegal behaviour... + */ + regs->sr &= 0x0000ffff; + return 0; +} +#endif + +#endif /* ! __ASSEMBLY__ */ + +#endif /* __ASM_AVR32_PTRACE_H */ diff --git a/include/asm-avr32/sdram.h b/include/asm-avr32/sdram.h new file mode 100644 index 0000000..5057eef --- /dev/null +++ b/include/asm-avr32/sdram.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_SDRAM_H +#define __ASM_AVR32_SDRAM_H + +struct sdram_info { + unsigned long phys_addr; + unsigned int row_bits, col_bits, bank_bits; + unsigned int cas, twr, trc, trp, trcd, tras, txsr; +}; + +extern unsigned long sdram_init(const struct sdram_info *info); + +#endif /* __ASM_AVR32_SDRAM_H */ diff --git a/include/asm-avr32/sections.h b/include/asm-avr32/sections.h new file mode 100644 index 0000000..75373ab --- /dev/null +++ b/include/asm-avr32/sections.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_SECTIONS_H +#define __ASM_AVR32_SECTIONS_H + +/* References to section boundaries */ + +extern char _text[], _etext[]; +extern char __flashprog_start[], __flashprog_end[]; +extern char _data[], __data_lma[], _edata[], __edata_lma[]; +extern char __got_start[], __got_lma[], __got_end[]; +extern char _end[]; + +/* + * Everything in .flashprog will be locked in the icache so it doesn't + * get disturbed when executing flash commands. + */ +#define __flashprog __attribute__((section(".flashprog"), __noinline__)) + +#endif /* __ASM_AVR32_SECTIONS_H */ diff --git a/include/asm-avr32/setup.h b/include/asm-avr32/setup.h new file mode 100644 index 0000000..e6ef8d6 --- /dev/null +++ b/include/asm-avr32/setup.h @@ -0,0 +1,142 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * Based on linux/include/asm-arm/setup.h + * Copyright (C) 1997-1999 Russel King + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_SETUP_H__ +#define __ASM_AVR32_SETUP_H__ + +#define COMMAND_LINE_SIZE 256 + +/* Magic number indicating that a tag table is present */ +#define ATAG_MAGIC 0xa2a25441 + +#ifndef __ASSEMBLY__ + +/* + * Generic memory range, used by several tags. + * + * addr is always physical. + * size is measured in bytes. + * next is for use by the OS, e.g. for grouping regions into + * linked lists. + */ +struct tag_mem_range { + u32 addr; + u32 size; + struct tag_mem_range * next; +}; + +/* The list ends with an ATAG_NONE node. */ +#define ATAG_NONE 0x00000000 + +struct tag_header { + u32 size; + u32 tag; +}; + +/* The list must start with an ATAG_CORE node */ +#define ATAG_CORE 0x54410001 + +struct tag_core { + u32 flags; + u32 pagesize; + u32 rootdev; +}; + +/* it is allowed to have multiple ATAG_MEM nodes */ +#define ATAG_MEM 0x54410002 +/* ATAG_MEM uses tag_mem_range */ + +/* command line: \0 terminated string */ +#define ATAG_CMDLINE 0x54410003 + +struct tag_cmdline { + char cmdline[1]; /* this is the minimum size */ +}; + +/* Ramdisk image (may be compressed) */ +#define ATAG_RDIMG 0x54410004 +/* ATAG_RDIMG uses tag_mem_range */ + +/* Information about various clocks present in the system */ +#define ATAG_CLOCK 0x54410005 + +struct tag_clock { + u32 clock_id; /* Which clock are we talking about? */ + u32 clock_flags; /* Special features */ + u64 clock_hz; /* Clock speed in Hz */ +}; + +/* The clock types we know about */ +#define ACLOCK_BOOTCPU 0 /* The CPU we're booting from */ +#define ACLOCK_HSB 1 /* Deprecated */ + +/* Memory reserved for the system (e.g. the bootloader) */ +#define ATAG_RSVD_MEM 0x54410006 +/* ATAG_RSVD_MEM uses tag_mem_range */ + +/* Ethernet information */ + +#define ATAG_ETHERNET 0x54410007 + +struct tag_ethernet { + u8 mac_index; + u8 mii_phy_addr; + u8 hw_address[6]; +}; + +#define AETH_INVALID_PHY 0xff + +struct tag { + struct tag_header hdr; + union { + struct tag_core core; + struct tag_mem_range mem_range; + struct tag_cmdline cmdline; + struct tag_clock clock; + struct tag_ethernet ethernet; + } u; +}; + +struct tagtable { + u32 tag; + int (*parse)(struct tag *); +}; + +#define __tag __attribute_used__ __attribute__((__section__(".taglist"))) +#define __tagtable(tag, fn) \ + static struct tagtable __tagtable_##fn __tag = { tag, fn } + +#define tag_member_present(tag,member) \ + ((unsigned long)(&((struct tag *)0L)->member + 1) \ + <= (tag)->hdr.size * 4) + +#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size)) +#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) + +#define for_each_tag(t,base) \ + for (t = base; t->hdr.size; t = tag_next(t)) + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_AVR32_SETUP_H__ */ diff --git a/include/asm-avr32/string.h b/include/asm-avr32/string.h new file mode 100644 index 0000000..8b05d1a --- /dev/null +++ b/include/asm-avr32/string.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_STRING_H +#define __ASM_AVR32_STRING_H + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *s, int c, size_t n); + +#endif /* __ASM_AVR32_STRING_H */ diff --git a/include/asm-avr32/sysreg.h b/include/asm-avr32/sysreg.h new file mode 100644 index 0000000..72ad49e --- /dev/null +++ b/include/asm-avr32/sysreg.h @@ -0,0 +1,279 @@ +/* + * System registers for AVR32 + */ +#ifndef __ASM_AVR32_SYSREG_H__ +#define __ASM_AVR32_SYSREG_H__ + +/* system register offsets */ +#define SYSREG_SR 0x0000 +#define SYSREG_EVBA 0x0004 +#define SYSREG_ACBA 0x0008 +#define SYSREG_CPUCR 0x000c +#define SYSREG_ECR 0x0010 +#define SYSREG_RSR_SUP 0x0014 +#define SYSREG_RSR_INT0 0x0018 +#define SYSREG_RSR_INT1 0x001c +#define SYSREG_RSR_INT2 0x0020 +#define SYSREG_RSR_INT3 0x0024 +#define SYSREG_RSR_EX 0x0028 +#define SYSREG_RSR_NMI 0x002c +#define SYSREG_RSR_DBG 0x0030 +#define SYSREG_RAR_SUP 0x0034 +#define SYSREG_RAR_INT0 0x0038 +#define SYSREG_RAR_INT1 0x003c +#define SYSREG_RAR_INT2 0x0040 +#define SYSREG_RAR_INT3 0x0044 +#define SYSREG_RAR_EX 0x0048 +#define SYSREG_RAR_NMI 0x004c +#define SYSREG_RAR_DBG 0x0050 +#define SYSREG_JECR 0x0054 +#define SYSREG_JOSP 0x0058 +#define SYSREG_JAVA_LV0 0x005c +#define SYSREG_JAVA_LV1 0x0060 +#define SYSREG_JAVA_LV2 0x0064 +#define SYSREG_JAVA_LV3 0x0068 +#define SYSREG_JAVA_LV4 0x006c +#define SYSREG_JAVA_LV5 0x0070 +#define SYSREG_JAVA_LV6 0x0074 +#define SYSREG_JAVA_LV7 0x0078 +#define SYSREG_JTBA 0x007c +#define SYSREG_JBCR 0x0080 +#define SYSREG_CONFIG0 0x0100 +#define SYSREG_CONFIG1 0x0104 +#define SYSREG_COUNT 0x0108 +#define SYSREG_COMPARE 0x010c +#define SYSREG_TLBEHI 0x0110 +#define SYSREG_TLBELO 0x0114 +#define SYSREG_PTBR 0x0118 +#define SYSREG_TLBEAR 0x011c +#define SYSREG_MMUCR 0x0120 +#define SYSREG_TLBARLO 0x0124 +#define SYSREG_TLBARHI 0x0128 +#define SYSREG_PCCNT 0x012c +#define SYSREG_PCNT0 0x0130 +#define SYSREG_PCNT1 0x0134 +#define SYSREG_PCCR 0x0138 +#define SYSREG_BEAR 0x013c +#define SYSREG_SABAL 0x0300 +#define SYSREG_SABAH 0x0304 +#define SYSREG_SABD 0x0308 + +/* Bitfields in SR */ +#define SYSREG_SR_C_OFFSET 0 +#define SYSREG_SR_C_SIZE 1 +#define SYSREG_Z_OFFSET 1 +#define SYSREG_Z_SIZE 1 +#define SYSREG_SR_N_OFFSET 2 +#define SYSREG_SR_N_SIZE 1 +#define SYSREG_SR_V_OFFSET 3 +#define SYSREG_SR_V_SIZE 1 +#define SYSREG_Q_OFFSET 4 +#define SYSREG_Q_SIZE 1 +#define SYSREG_L_OFFSET 5 +#define SYSREG_L_SIZE 1 +#define SYSREG_T_OFFSET 14 +#define SYSREG_T_SIZE 1 +#define SYSREG_SR_R_OFFSET 15 +#define SYSREG_SR_R_SIZE 1 +#define SYSREG_GM_OFFSET 16 +#define SYSREG_GM_SIZE 1 +#define SYSREG_I0M_OFFSET 17 +#define SYSREG_I0M_SIZE 1 +#define SYSREG_I1M_OFFSET 18 +#define SYSREG_I1M_SIZE 1 +#define SYSREG_I2M_OFFSET 19 +#define SYSREG_I2M_SIZE 1 +#define SYSREG_I3M_OFFSET 20 +#define SYSREG_I3M_SIZE 1 +#define SYSREG_EM_OFFSET 21 +#define SYSREG_EM_SIZE 1 +#define SYSREG_M0_OFFSET 22 +#define SYSREG_M0_SIZE 1 +#define SYSREG_M1_OFFSET 23 +#define SYSREG_M1_SIZE 1 +#define SYSREG_M2_OFFSET 24 +#define SYSREG_M2_SIZE 1 +#define SYSREG_SR_D_OFFSET 26 +#define SYSREG_SR_D_SIZE 1 +#define SYSREG_DM_OFFSET 27 +#define SYSREG_DM_SIZE 1 +#define SYSREG_SR_J_OFFSET 28 +#define SYSREG_SR_J_SIZE 1 +#define SYSREG_H_OFFSET 29 +#define SYSREG_H_SIZE 1 + +/* Bitfields in CPUCR */ +#define SYSREG_BI_OFFSET 0 +#define SYSREG_BI_SIZE 1 +#define SYSREG_BE_OFFSET 1 +#define SYSREG_BE_SIZE 1 +#define SYSREG_FE_OFFSET 2 +#define SYSREG_FE_SIZE 1 +#define SYSREG_RE_OFFSET 3 +#define SYSREG_RE_SIZE 1 +#define SYSREG_IBE_OFFSET 4 +#define SYSREG_IBE_SIZE 1 +#define SYSREG_IEE_OFFSET 5 +#define SYSREG_IEE_SIZE 1 + +/* Bitfields in ECR */ +#define SYSREG_ECR_OFFSET 0 +#define SYSREG_ECR_SIZE 32 + +/* Bitfields in CONFIG0 */ +#define SYSREG_CONFIG0_R_OFFSET 0 +#define SYSREG_CONFIG0_R_SIZE 1 +#define SYSREG_CONFIG0_D_OFFSET 1 +#define SYSREG_CONFIG0_D_SIZE 1 +#define SYSREG_CONFIG0_S_OFFSET 2 +#define SYSREG_CONFIG0_S_SIZE 1 +#define SYSREG_O_OFFSET 3 +#define SYSREG_O_SIZE 1 +#define SYSREG_P_OFFSET 4 +#define SYSREG_P_SIZE 1 +#define SYSREG_CONFIG0_J_OFFSET 5 +#define SYSREG_CONFIG0_J_SIZE 1 +#define SYSREG_F_OFFSET 6 +#define SYSREG_F_SIZE 1 +#define SYSREG_MMUT_OFFSET 7 +#define SYSREG_MMUT_SIZE 3 +#define SYSREG_AR_OFFSET 10 +#define SYSREG_AR_SIZE 3 +#define SYSREG_AT_OFFSET 13 +#define SYSREG_AT_SIZE 3 +#define SYSREG_PROCESSORREVISION_OFFSET 16 +#define SYSREG_PROCESSORREVISION_SIZE 8 +#define SYSREG_PROCESSORID_OFFSET 24 +#define SYSREG_PROCESSORID_SIZE 8 + +/* Bitfields in CONFIG1 */ +#define SYSREG_DASS_OFFSET 0 +#define SYSREG_DASS_SIZE 3 +#define SYSREG_DLSZ_OFFSET 3 +#define SYSREG_DLSZ_SIZE 3 +#define SYSREG_DSET_OFFSET 6 +#define SYSREG_DSET_SIZE 4 +#define SYSREG_IASS_OFFSET 10 +#define SYSREG_IASS_SIZE 3 +#define SYSREG_ILSZ_OFFSET 13 +#define SYSREG_ILSZ_SIZE 3 +#define SYSREG_ISET_OFFSET 16 +#define SYSREG_ISET_SIZE 4 +#define SYSREG_DMMUSZ_OFFSET 20 +#define SYSREG_DMMUSZ_SIZE 6 +#define SYSREG_IMMUSZ_OFFSET 26 +#define SYSREG_IMMUSZ_SIZE 6 + +/* Bitfields in TLBEHI */ +#define SYSREG_ASID_OFFSET 0 +#define SYSREG_ASID_SIZE 8 +#define SYSREG_TLBEHI_I_OFFSET 8 +#define SYSREG_TLBEHI_I_SIZE 1 +#define SYSREG_TLBEHI_V_OFFSET 9 +#define SYSREG_TLBEHI_V_SIZE 1 +#define SYSREG_VPN_OFFSET 10 +#define SYSREG_VPN_SIZE 22 + +/* Bitfields in TLBELO */ +#define SYSREG_W_OFFSET 0 +#define SYSREG_W_SIZE 1 +#define SYSREG_TLBELO_D_OFFSET 1 +#define SYSREG_TLBELO_D_SIZE 1 +#define SYSREG_SZ_OFFSET 2 +#define SYSREG_SZ_SIZE 2 +#define SYSREG_AP_OFFSET 4 +#define SYSREG_AP_SIZE 3 +#define SYSREG_B_OFFSET 7 +#define SYSREG_B_SIZE 1 +#define SYSREG_G_OFFSET 8 +#define SYSREG_G_SIZE 1 +#define SYSREG_TLBELO_C_OFFSET 9 +#define SYSREG_TLBELO_C_SIZE 1 +#define SYSREG_PFN_OFFSET 10 +#define SYSREG_PFN_SIZE 22 + +/* Bitfields in MMUCR */ +#define SYSREG_E_OFFSET 0 +#define SYSREG_E_SIZE 1 +#define SYSREG_M_OFFSET 1 +#define SYSREG_M_SIZE 1 +#define SYSREG_MMUCR_I_OFFSET 2 +#define SYSREG_MMUCR_I_SIZE 1 +#define SYSREG_MMUCR_N_OFFSET 3 +#define SYSREG_MMUCR_N_SIZE 1 +#define SYSREG_MMUCR_S_OFFSET 4 +#define SYSREG_MMUCR_S_SIZE 1 +#define SYSREG_DLA_OFFSET 8 +#define SYSREG_DLA_SIZE 6 +#define SYSREG_DRP_OFFSET 14 +#define SYSREG_DRP_SIZE 6 +#define SYSREG_ILA_OFFSET 20 +#define SYSREG_ILA_SIZE 6 +#define SYSREG_IRP_OFFSET 26 +#define SYSREG_IRP_SIZE 6 + +/* Bitfields in PCCR */ +#define SYSREG_PCCR_R_OFFSET 1 +#define SYSREG_PCCR_R_SIZE 1 +#define SYSREG_PCCR_C_OFFSET 2 +#define SYSREG_PCCR_C_SIZE 1 +#define SYSREG_PCCR_S_OFFSET 3 +#define SYSREG_PCCR_S_SIZE 1 +#define SYSREG_IEC_OFFSET 4 +#define SYSREG_IEC_SIZE 1 +#define SYSREG_IE0_OFFSET 5 +#define SYSREG_IE0_SIZE 1 +#define SYSREG_IE1_OFFSET 6 +#define SYSREG_IE1_SIZE 1 +#define SYSREG_FC_OFFSET 8 +#define SYSREG_FC_SIZE 1 +#define SYSREG_F0_OFFSET 9 +#define SYSREG_F0_SIZE 1 +#define SYSREG_F1_OFFSET 10 +#define SYSREG_F1_SIZE 1 +#define SYSREG_CONF0_OFFSET 12 +#define SYSREG_CONF0_SIZE 6 +#define SYSREG_CONF1_OFFSET 18 +#define SYSREG_CONF1_SIZE 6 + +/* Constants for ECR */ +#define ECR_UNRECOVERABLE 0 +#define ECR_TLB_MULTIPLE 1 +#define ECR_BUS_ERROR_WRITE 2 +#define ECR_BUS_ERROR_READ 3 +#define ECR_NMI 4 +#define ECR_ADDR_ALIGN_X 5 +#define ECR_PROTECTION_X 6 +#define ECR_DEBUG 7 +#define ECR_ILLEGAL_OPCODE 8 +#define ECR_UNIMPL_INSTRUCTION 9 +#define ECR_PRIVILEGE_VIOLATION 10 +#define ECR_FPE 11 +#define ECR_COPROC_ABSENT 12 +#define ECR_ADDR_ALIGN_R 13 +#define ECR_ADDR_ALIGN_W 14 +#define ECR_PROTECTION_R 15 +#define ECR_PROTECTION_W 16 +#define ECR_DTLB_MODIFIED 17 +#define ECR_TLB_MISS_X 20 +#define ECR_TLB_MISS_R 24 +#define ECR_TLB_MISS_W 28 + +/* Bit manipulation macros */ +#define SYSREG_BIT(name) (1 << SYSREG_##name##_OFFSET) +#define SYSREG_BF(name,value) \ + (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) \ + << SYSREG_##name##_OFFSET) +#define SYSREG_BFEXT(name,value) \ + (((value) >> SYSREG_##name##_OFFSET) \ + & ((1 << SYSREG_##name##_SIZE) - 1)) +#define SYSREG_BFINS(name,value,old) \ + (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) \ + << SYSREG_##name##_OFFSET)) \ + | SYSREG_BF(name,value)) + +/* Register access macros */ +#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg) +#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value) + +#endif /* __ASM_AVR32_SYSREG_H__ */ diff --git a/include/asm-avr32/types.h b/include/asm-avr32/types.h new file mode 100644 index 0000000..e6c65d9 --- /dev/null +++ b/include/asm-avr32/types.h @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_AVR32_TYPES_H +#define __ASM_AVR32_TYPES_H + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +typedef __signed__ char s8; +typedef unsigned char u8; + +typedef __signed__ short s16; +typedef unsigned short u16; + +typedef __signed__ int s32; +typedef unsigned int u32; + +typedef __signed__ long long s64; +typedef unsigned long long u64; + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +#ifdef CONFIG_LBD +typedef u64 sector_t; +#define HAVE_SECTOR_T +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + + +#endif /* __ASM_AVR32_TYPES_H */ diff --git a/include/asm-avr32/u-boot.h b/include/asm-avr32/u-boot.h new file mode 100644 index 0000000..71dfcaf --- /dev/null +++ b/include/asm-avr32/u-boot.h @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_U_BOOT_H__ +#define __ASM_U_BOOT_H__ 1 + +typedef struct bd_info { + unsigned long bi_baudrate; + unsigned long bi_ip_addr; + unsigned char bi_enetaddr[6]; + unsigned char bi_phy_id[4]; + struct environment_s *bi_env; + unsigned long bi_board_number; + void *bi_boot_params; + struct { + unsigned long start; + unsigned long size; + } bi_dram[CONFIG_NR_DRAM_BANKS]; + unsigned long bi_flashstart; + unsigned long bi_flashsize; + unsigned long bi_flashoffset; +} bd_t; + +#define bi_memstart bi_dram[0].start +#define bi_memsize bi_dram[0].size + +/** + * container_of - cast a member of a structure out to the containing structure + * + * @ptr: the pointer to the member. + * @type: the type of the container struct this is embedded in. + * @member: the name of the member within the struct. + */ +#define container_of(ptr, type, member) ({ \ + const typeof( ((type *)0)->member ) *__mptr = (ptr); \ + (type *)( (char *)__mptr - offsetof(type,member) );}) + +#endif /* __ASM_U_BOOT_H__ */ diff --git a/include/asm-ppc/fsl_i2c.h b/include/asm-ppc/fsl_i2c.h new file mode 100644 index 0000000..76b1c43 --- /dev/null +++ b/include/asm-ppc/fsl_i2c.h @@ -0,0 +1,90 @@ +/* + * Freescale I2C Controller + * + * Copyright 2006 Freescale Semiconductor, Inc. + * + * Based on earlier versions by Gleb Natapov <gnatapov@mrv.com>, + * Xianghua Xiao <x.xiao@motorola.com>, Eran Liberty (liberty@freescale.com), + * and Jeff Brown. + * Some bits are taken from linux driver writen by adrian@humboldt.co.uk. + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_FSL_I2C_H_ +#define _ASM_FSL_I2C_H_ + +#include <asm/types.h> + +typedef struct fsl_i2c { + + u8 adr; /* I2C slave address */ + u8 res0[3]; +#define I2C_ADR 0xFE +#define I2C_ADR_SHIFT 1 +#define I2C_ADR_RES ~(I2C_ADR) + + u8 fdr; /* I2C frequency divider register */ + u8 res1[3]; +#define IC2_FDR 0x3F +#define IC2_FDR_SHIFT 0 +#define IC2_FDR_RES ~(IC2_FDR) + + u8 cr; /* I2C control redister */ + u8 res2[3]; +#define I2C_CR_MEN 0x80 +#define I2C_CR_MIEN 0x40 +#define I2C_CR_MSTA 0x20 +#define I2C_CR_MTX 0x10 +#define I2C_CR_TXAK 0x08 +#define I2C_CR_RSTA 0x04 +#define I2C_CR_BCST 0x01 + + u8 sr; /* I2C status register */ + u8 res3[3]; +#define I2C_SR_MCF 0x80 +#define I2C_SR_MAAS 0x40 +#define I2C_SR_MBB 0x20 +#define I2C_SR_MAL 0x10 +#define I2C_SR_BCSTM 0x08 +#define I2C_SR_SRW 0x04 +#define I2C_SR_MIF 0x02 +#define I2C_SR_RXAK 0x01 + + u8 dr; /* I2C data register */ + u8 res4[3]; +#define I2C_DR 0xFF +#define I2C_DR_SHIFT 0 +#define I2C_DR_RES ~(I2C_DR) + + u8 dfsrr; /* I2C digital filter sampling rate register */ + u8 res5[3]; +#define I2C_DFSRR 0x3F +#define I2C_DFSRR_SHIFT 0 +#define I2C_DFSRR_RES ~(I2C_DR) + + /* Fill out the reserved block */ + u8 res6[0xE8]; +} fsl_i2c_t; + + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#endif /* _ASM_I2C_H_ */ diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 2f10e95..5377c2e 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -9,6 +9,9 @@ #ifndef __IMMAP_85xx__ #define __IMMAP_85xx__ +#include <asm/types.h> +#include <asm/fsl_i2c.h> + /* * Local-Access Registers and ECM Registers(0x0000-0x2000) */ @@ -129,37 +132,8 @@ typedef struct ccsr_ddr { * I2C Registers(0x3000-0x4000) */ typedef struct ccsr_i2c { - u_char i2cadr; /* 0x3000 - I2C Address Register */ -#define MPC85xx_I2CADR_MASK 0xFE - char res1[3]; - u_char i2cfdr; /* 0x3004 - I2C Frequency Divider Register */ -#define MPC85xx_I2CFDR_MASK 0x3F - char res2[3]; - u_char i2ccr; /* 0x3008 - I2C Control Register */ -#define MPC85xx_I2CCR_MEN 0x80 -#define MPC85xx_I2CCR_MIEN 0x40 -#define MPC85xx_I2CCR_MSTA 0x20 -#define MPC85xx_I2CCR_MTX 0x10 -#define MPC85xx_I2CCR_TXAK 0x08 -#define MPC85xx_I2CCR_RSTA 0x04 -#define MPC85xx_I2CCR_BCST 0x01 - char res3[3]; - u_char i2csr; /* 0x300c - I2C Status Register */ -#define MPC85xx_I2CSR_MCF 0x80 -#define MPC85xx_I2CSR_MAAS 0x40 -#define MPC85xx_I2CSR_MBB 0x20 -#define MPC85xx_I2CSR_MAL 0x10 -#define MPC85xx_I2CSR_BCSTM 0x08 -#define MPC85xx_I2CSR_SRW 0x04 -#define MPC85xx_I2CSR_MIF 0x02 -#define MPC85xx_I2CSR_RXAK 0x01 - char res4[3]; - u_char i2cdr; /* 0x3010 - I2C Data Register */ -#define MPC85xx_I2CDR_DATA 0xFF - char res5[3]; - u_char i2cdfsrr; /* 0x3014 - I2C Digital Filtering Sampling Rate Register */ -#define MPC85xx_I2CDFSRR 0x3F - char res6[4075]; + struct fsl_i2c i2c[1]; + u8 res[4096 - 1 * sizeof(struct fsl_i2c)]; } ccsr_i2c_t; #if defined(CONFIG_MPC8540) \ @@ -246,7 +220,6 @@ typedef struct ccsr_lbc { /* * PCI Registers(0x8000-0x9000) - * Omitting Reserved(0x9000-0x2_0000) */ typedef struct ccsr_pcix { uint cfg_addr; /* 0x8000 - PCIX Configuration Address Register */ @@ -309,9 +282,27 @@ typedef struct ccsr_pcix { uint peextaddrcr; /* 0x8e14 - PCIX Error Extended Address Capture Register */ uint pedlcr; /* 0x8e18 - PCIX Error Data Low Capture Register */ uint pedhcr; /* 0x8e1c - PCIX Error Error Data High Capture Register */ - char res11[94688]; + uint gas_timr; /* 0x8e20 - PCIX Gasket Timer Register */ + char res11[476]; } ccsr_pcix_t; +#define PCIX_COMMAND 0x62 +#define POWAR_EN 0x80000000 +#define POWAR_IO_READ 0x00080000 +#define POWAR_MEM_READ 0x00040000 +#define POWAR_IO_WRITE 0x00008000 +#define POWAR_MEM_WRITE 0x00004000 +#define POWAR_MEM_512M 0x0000001c +#define POWAR_IO_1M 0x00000013 + +#define PIWAR_EN 0x80000000 +#define PIWAR_PF 0x20000000 +#define PIWAR_LOCAL 0x00f00000 +#define PIWAR_READ_SNOOP 0x00050000 +#define PIWAR_WRITE_SNOOP 0x00005000 +#define PIWAR_MEM_2G 0x0000001e + + /* * L2 Cache Registers(0x2_0000-0x2_1000) */ @@ -1572,6 +1563,8 @@ typedef struct ccsr_gur { char res15[61651]; } ccsr_gur_t; +#define PORDEVSR_PCI (0x00800000) /* PCI Mode */ + typedef struct immap { ccsr_local_ecm_t im_local_ecm; ccsr_ddr_t im_ddr; @@ -1579,6 +1572,8 @@ typedef struct immap { ccsr_duart_t im_duart; ccsr_lbc_t im_lbc; ccsr_pcix_t im_pcix; + ccsr_pcix_t im_pcix2; + char reserved[90112]; ccsr_l2cache_t im_l2cache; ccsr_dma_t im_dma; ccsr_tsec_t im_tsec1; diff --git a/include/asm-ppc/immap_86xx.h b/include/asm-ppc/immap_86xx.h new file mode 100644 index 0000000..a5552c4 --- /dev/null +++ b/include/asm-ppc/immap_86xx.h @@ -0,0 +1,1323 @@ +/* + * MPC86xx Internal Memory Map + * + * Copyright(c) 2004 Freescale Semiconductor + * Jeff Brown (Jeffrey@freescale.com) + * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) + * + */ + +#ifndef __IMMAP_86xx__ +#define __IMMAP_86xx__ + +#include <asm/types.h> +#include <asm/fsl_i2c.h> + +/* Local-Access Registers and MCM Registers(0x0000-0x2000) */ +typedef struct ccsr_local_mcm { + uint ccsrbar; /* 0x0 - Control Configuration Status Registers Base Address Register */ + char res1[4]; + uint altcbar; /* 0x8 - Alternate Configuration Base Address Register */ + char res2[4]; + uint altcar; /* 0x10 - Alternate Configuration Attribute Register */ + char res3[12]; + uint bptr; /* 0x20 - Boot Page Translation Register */ + char res4[3044]; + uint lawbar0; /* 0xc08 - Local Access Window 0 Base Address Register */ + char res5[4]; + uint lawar0; /* 0xc10 - Local Access Window 0 Attributes Register */ + char res6[20]; + uint lawbar1; /* 0xc28 - Local Access Window 1 Base Address Register */ + char res7[4]; + uint lawar1; /* 0xc30 - Local Access Window 1 Attributes Register */ + char res8[20]; + uint lawbar2; /* 0xc48 - Local Access Window 2 Base Address Register */ + char res9[4]; + uint lawar2; /* 0xc50 - Local Access Window 2 Attributes Register */ + char res10[20]; + uint lawbar3; /* 0xc68 - Local Access Window 3 Base Address Register */ + char res11[4]; + uint lawar3; /* 0xc70 - Local Access Window 3 Attributes Register */ + char res12[20]; + uint lawbar4; /* 0xc88 - Local Access Window 4 Base Address Register */ + char res13[4]; + uint lawar4; /* 0xc90 - Local Access Window 4 Attributes Register */ + char res14[20]; + uint lawbar5; /* 0xca8 - Local Access Window 5 Base Address Register */ + char res15[4]; + uint lawar5; /* 0xcb0 - Local Access Window 5 Attributes Register */ + char res16[20]; + uint lawbar6; /* 0xcc8 - Local Access Window 6 Base Address Register */ + char res17[4]; + uint lawar6; /* 0xcd0 - Local Access Window 6 Attributes Register */ + char res18[20]; + uint lawbar7; /* 0xce8 - Local Access Window 7 Base Address Register */ + char res19[4]; + uint lawar7; /* 0xcf0 - Local Access Window 7 Attributes Register */ + char res20[20]; + uint lawbar8; /* 0xd08 - Local Access Window 8 Base Address Register */ + char res21[4]; + uint lawar8; /* 0xd10 - Local Access Window 8 Attributes Register */ + char res22[20]; + uint lawbar9; /* 0xd28 - Local Access Window 9 Base Address Register */ + char res23[4]; + uint lawar9; /* 0xd30 - Local Access Window 9 Attributes Register */ + char res24[716]; + uint abcr; /* 0x1000 - MCM CCB Address Configuration Register */ + char res25[4]; + uint dbcr; /* 0x1008 - MCM MPX data bus Configuration Register */ + char res26[4]; + uint pcr; /* 0x1010 - MCM CCB Port Configuration Register */ + char res27[44]; + uint hpmr0; /* 0x1040 - MCM HPM Threshold Count Register 0 */ + uint hpmr1; /* 0x1044 - MCM HPM Threshold Count Register 1 */ + uint hpmr2; /* 0x1048 - MCM HPM Threshold Count Register 2 */ + uint hpmr3; /* 0x104c - MCM HPM Threshold Count Register 3 */ + char res28[16]; + uint hpmr4; /* 0x1060 - MCM HPM Threshold Count Register 4 */ + uint hpmr5; /* 0x1064 - MCM HPM Threshold Count Register 5 */ + uint hpmccr; /* 0x1068 - MCM HPM Cycle Count Register */ + char res29[3476]; + uint edr; /* 0x1e00 - MCM Error Detect Register */ + char res30[4]; + uint eer; /* 0x1e08 - MCM Error Enable Register */ + uint eatr; /* 0x1e0c - MCM Error Attributes Capture Register */ + uint eladr; /* 0x1e10 - MCM Error Low Address Capture Register */ + uint ehadr; /* 0x1e14 - MCM Error High Address Capture Register */ + char res31[488]; +} ccsr_local_mcm_t; + +/* DDR memory controller registers(0x2000-0x3000) and (0x6000-0x7000) */ + +typedef struct ccsr_ddr { + uint cs0_bnds; /* 0x2000 - DDR Chip Select 0 Memory Bounds */ + char res1[4]; + uint cs1_bnds; /* 0x2008 - DDR Chip Select 1 Memory Bounds */ + char res2[4]; + uint cs2_bnds; /* 0x2010 - DDR Chip Select 2 Memory Bounds */ + char res3[4]; + uint cs3_bnds; /* 0x2018 - DDR Chip Select 3 Memory Bounds */ + char res4[4]; + uint cs4_bnds; /* 0x2020 - DDR Chip Select 4 Memory Bounds */ + char res5[4]; + uint cs5_bnds; /* 0x2028 - DDR Chip Select 5 Memory Bounds */ + char res6[84]; + uint cs0_config; /* 0x2080 - DDR Chip Select Configuration */ + uint cs1_config; /* 0x2084 - DDR Chip Select Configuration */ + uint cs2_config; /* 0x2088 - DDR Chip Select Configuration */ + uint cs3_config; /* 0x208c - DDR Chip Select Configuration */ + uint cs4_config; /* 0x2090 - DDR Chip Select Configuration */ + uint cs5_config; /* 0x2094 - DDR Chip Select Configuration */ + char res7[104]; + uint ext_refrec; /* 0x2100 - DDR SDRAM extended refresh recovery */ + uint timing_cfg_0; /* 0x2104 - DDR SDRAM Timing Configuration Register 0 */ + uint timing_cfg_1; /* 0x2108 - DDR SDRAM Timing Configuration Register 1 */ + uint timing_cfg_2; /* 0x210c - DDR SDRAM Timing Configuration Register 2 */ + uint sdram_cfg_1; /* 0x2110 - DDR SDRAM Control Configuration 1 */ + uint sdram_cfg_2; /* 0x2114 - DDR SDRAM Control Configuration 2 */ + uint sdram_mode_1; /* 0x2118 - DDR SDRAM Mode Configuration 1 */ + uint sdram_mode_2; /* 0x211c - DDR SDRAM Mode Configuration 2 */ + uint sdram_mode_cntl; /* 0x2120 - DDR SDRAM Mode Control */ + uint sdram_interval; /* 0x2124 - DDR SDRAM Interval Configuration */ + uint sdram_data_init; /* 0x2128 - DDR SDRAM Data Initialization */ + char res8[4]; + uint sdram_clk_cntl; /* 0x2130 - DDR SDRAM Clock Control */ + char res9[12]; + uint sdram_ocd_cntl; /* 0x2140 - DDR SDRAM OCD Control */ + uint sdram_ocd_status; /* 0x2144 - DDR SDRAM OCD Status */ + uint init_addr; /* 0x2148 - DDR training initialzation address */ + uint init_addr_ext; /* 0x214C - DDR training initialzation extended address */ + char res10[2728]; + uint ip_rev1; /* 0x2BF8 - DDR IP Block Revision 1 */ + uint ip_rev2; /* 0x2BFC - DDR IP Block Revision 2 */ + char res11[512]; + uint data_err_inject_hi; /* 0x2e00 - DDR Memory Data Path Error Injection Mask High */ + uint data_err_inject_lo; /* 0x2e04 - DDR Memory Data Path Error Injection Mask Low */ + uint ecc_err_inject; /* 0x2e08 - DDR Memory Data Path Error Injection Mask ECC */ + char res12[20]; + uint capture_data_hi; /* 0x2e20 - DDR Memory Data Path Read Capture High */ + uint capture_data_lo; /* 0x2e24 - DDR Memory Data Path Read Capture Low */ + uint capture_ecc; /* 0x2e28 - DDR Memory Data Path Read Capture ECC */ + char res13[20]; + uint err_detect; /* 0x2e40 - DDR Memory Error Detect */ + uint err_disable; /* 0x2e44 - DDR Memory Error Disable */ + uint err_int_en; /* 0x2e48 - DDR Memory Error Interrupt Enable */ + uint capture_attributes; /* 0x2e4c - DDR Memory Error Attributes Capture */ + uint capture_address; /* 0x2e50 - DDR Memory Error Address Capture */ + uint capture_ext_address; /* 0x2e54 - DDR Memory Error Extended Address Capture */ + uint err_sbe; /* 0x2e58 - DDR Memory Single-Bit ECC Error Management */ + char res14[164]; + uint debug_1; /* 0x2f00 */ + uint debug_2; + uint debug_3; + uint debug_4; + uint debug_5; + char res15[236]; +} ccsr_ddr_t; + + +/* Daul I2C Registers(0x3000-0x4000) */ +typedef struct ccsr_i2c { + struct fsl_i2c i2c[2]; + u8 res[4096 - 2 * sizeof(struct fsl_i2c)]; +} ccsr_i2c_t; + +/* DUART Registers(0x4000-0x5000) */ +typedef struct ccsr_duart { + char res1[1280]; + u_char urbr1_uthr1_udlb1;/* 0x4500 - URBR1, UTHR1, UDLB1 with the same address offset of 0x04500 */ + u_char uier1_udmb1; /* 0x4501 - UIER1, UDMB1 with the same address offset of 0x04501 */ + u_char uiir1_ufcr1_uafr1;/* 0x4502 - UIIR1, UFCR1, UAFR1 with the same address offset of 0x04502 */ + u_char ulcr1; /* 0x4503 - UART1 Line Control Register */ + u_char umcr1; /* 0x4504 - UART1 Modem Control Register */ + u_char ulsr1; /* 0x4505 - UART1 Line Status Register */ + u_char umsr1; /* 0x4506 - UART1 Modem Status Register */ + u_char uscr1; /* 0x4507 - UART1 Scratch Register */ + char res2[8]; + u_char udsr1; /* 0x4510 - UART1 DMA Status Register */ + char res3[239]; + u_char urbr2_uthr2_udlb2;/* 0x4600 - URBR2, UTHR2, UDLB2 with the same address offset of 0x04600 */ + u_char uier2_udmb2; /* 0x4601 - UIER2, UDMB2 with the same address offset of 0x04601 */ + u_char uiir2_ufcr2_uafr2;/* 0x4602 - UIIR2, UFCR2, UAFR2 with the same address offset of 0x04602 */ + u_char ulcr2; /* 0x4603 - UART2 Line Control Register */ + u_char umcr2; /* 0x4604 - UART2 Modem Control Register */ + u_char ulsr2; /* 0x4605 - UART2 Line Status Register */ + u_char umsr2; /* 0x4606 - UART2 Modem Status Register */ + u_char uscr2; /* 0x4607 - UART2 Scratch Register */ + char res4[8]; + u_char udsr2; /* 0x4610 - UART2 DMA Status Register */ + char res5[2543]; +} ccsr_duart_t; + + +/* Local Bus Controller Registers(0x5000-0x6000) */ +typedef struct ccsr_lbc { + uint br0; /* 0x5000 - LBC Base Register 0 */ + uint or0; /* 0x5004 - LBC Options Register 0 */ + uint br1; /* 0x5008 - LBC Base Register 1 */ + uint or1; /* 0x500c - LBC Options Register 1 */ + uint br2; /* 0x5010 - LBC Base Register 2 */ + uint or2; /* 0x5014 - LBC Options Register 2 */ + uint br3; /* 0x5018 - LBC Base Register 3 */ + uint or3; /* 0x501c - LBC Options Register 3 */ + uint br4; /* 0x5020 - LBC Base Register 4 */ + uint or4; /* 0x5024 - LBC Options Register 4 */ + uint br5; /* 0x5028 - LBC Base Register 5 */ + uint or5; /* 0x502c - LBC Options Register 5 */ + uint br6; /* 0x5030 - LBC Base Register 6 */ + uint or6; /* 0x5034 - LBC Options Register 6 */ + uint br7; /* 0x5038 - LBC Base Register 7 */ + uint or7; /* 0x503c - LBC Options Register 7 */ + char res1[40]; + uint mar; /* 0x5068 - LBC UPM Address Register */ + char res2[4]; + uint mamr; /* 0x5070 - LBC UPMA Mode Register */ + uint mbmr; /* 0x5074 - LBC UPMB Mode Register */ + uint mcmr; /* 0x5078 - LBC UPMC Mode Register */ + char res3[8]; + uint mrtpr; /* 0x5084 - LBC Memory Refresh Timer Prescaler Register */ + uint mdr; /* 0x5088 - LBC UPM Data Register */ + char res4[8]; + uint lsdmr; /* 0x5094 - LBC SDRAM Mode Register */ + char res5[8]; + uint lurt; /* 0x50a0 - LBC UPM Refresh Timer */ + uint lsrt; /* 0x50a4 - LBC SDRAM Refresh Timer */ + char res6[8]; + uint ltesr; /* 0x50b0 - LBC Transfer Error Status Register */ + uint ltedr; /* 0x50b4 - LBC Transfer Error Disable Register */ + uint lteir; /* 0x50b8 - LBC Transfer Error Interrupt Register */ + uint lteatr; /* 0x50bc - LBC Transfer Error Attributes Register */ + uint ltear; /* 0x50c0 - LBC Transfer Error Address Register */ + char res7[12]; + uint lbcr; /* 0x50d0 - LBC Configuration Register */ + uint lcrr; /* 0x50d4 - LBC Clock Ratio Register */ + char res8[3880]; +} ccsr_lbc_t; + +/* PCI Express Registers(0x8000-0x9000) and (0x9000-0xA000) */ +typedef struct ccsr_pex { + uint cfg_addr; /* 0x8000 - PEX Configuration Address Register */ + uint cfg_data; /* 0x8004 - PEX Configuration Data Register */ + char res1[4]; + uint out_comp_to; /* 0x800C - PEX Outbound Completion Timeout Register */ + char res2[16]; + uint pme_msg_det; /* 0x8020 - PEX PME & message detect register */ + uint pme_msg_int_en; /* 0x8024 - PEX PME & message interrupt enable register */ + uint pme_msg_dis; /* 0x8028 - PEX PME & message disable register */ + uint pm_command; /* 0x802c - PEX PM Command register */ + char res3[3016]; + uint block_rev1; /* 0x8bf8 - PEX Block Revision register 1 */ + uint block_rev2; /* 0x8bfc - PEX Block Revision register 2 */ + uint potar0; /* 0x8c00 - PEX Outbound Transaction Address Register 0 */ + uint potear0; /* 0x8c04 - PEX Outbound Translation Extended Address Register 0 */ + char res4[8]; + uint powar0; /* 0x8c10 - PEX Outbound Window Attributes Register 0 */ + char res5[12]; + uint potar1; /* 0x8c20 - PEX Outbound Transaction Address Register 1 */ + uint potear1; /* 0x8c24 - PEX Outbound Translation Extended Address Register 1 */ + uint powbar1; /* 0x8c28 - PEX Outbound Window Base Address Register 1 */ + char res6[4]; + uint powar1; /* 0x8c30 - PEX Outbound Window Attributes Register 1 */ + char res7[12]; + uint potar2; /* 0x8c40 - PEX Outbound Transaction Address Register 2 */ + uint potear2; /* 0x8c44 - PEX Outbound Translation Extended Address Register 2 */ + uint powbar2; /* 0x8c48 - PEX Outbound Window Base Address Register 2 */ + char res8[4]; + uint powar2; /* 0x8c50 - PEX Outbound Window Attributes Register 2 */ + char res9[12]; + uint potar3; /* 0x8c60 - PEX Outbound Transaction Address Register 3 */ + uint potear3; /* 0x8c64 - PEX Outbound Translation Extended Address Register 3 */ + uint powbar3; /* 0x8c68 - PEX Outbound Window Base Address Register 3 */ + char res10[4]; + uint powar3; /* 0x8c70 - PEX Outbound Window Attributes Register 3 */ + char res11[12]; + uint potar4; /* 0x8c80 - PEX Outbound Transaction Address Register 4 */ + uint potear4; /* 0x8c84 - PEX Outbound Translation Extended Address Register 4 */ + uint powbar4; /* 0x8c88 - PEX Outbound Window Base Address Register 4 */ + char res12[4]; + uint powar4; /* 0x8c90 - PEX Outbound Window Attributes Register 4 */ + char res13[12]; + char res14[256]; + uint pitar3; /* 0x8da0 - PEX Inbound Translation Address Register 3 */ + char res15[4]; + uint piwbar3; /* 0x8da8 - PEX Inbound Window Base Address Register 3 */ + uint piwbear3; /* 0x8dac - PEX Inbound Window Base Extended Address Register 3 */ + uint piwar3; /* 0x8db0 - PEX Inbound Window Attributes Register 3 */ + char res16[12]; + uint pitar2; /* 0x8dc0 - PEX Inbound Translation Address Register 2 */ + char res17[4]; + uint piwbar2; /* 0x8dc8 - PEX Inbound Window Base Address Register 2 */ + uint piwbear2; /* 0x8dcc - PEX Inbound Window Base Extended Address Register 2 */ + uint piwar2; /* 0x8dd0 - PEX Inbound Window Attributes Register 2 */ + char res18[12]; + uint pitar1; /* 0x8de0 - PEX Inbound Translation Address Register 1 */ + char res19[4]; + uint piwbar1; /* 0x8de8 - PEX Inbound Window Base Address Register 1 */ + uint piwbear1; + uint piwar1; /* 0x8df0 - PEX Inbound Window Attributes Register 1 */ + char res20[12]; + uint pedr; /* 0x8e00 - PEX Error Detect Register */ + char res21[4]; + uint peer; /* 0x8e08 - PEX Error Interrupt Enable Register */ + char res22[4]; + uint pecdr; /* 0x8e10 - PEX Error Disable Register */ + char res23[12]; + uint peer_stat; /* 0x8e20 - PEX Error Capture Status Register */ + char res24[4]; + uint perr_cap0; /* 0x8e28 - PEX Error Capture Register 0 */ + uint perr_cap1; /* 0x8e2c - PEX Error Capture Register 1 */ + uint perr_cap2; /* 0x8e30 - PEX Error Capture Register 2 */ + uint perr_cap3; /* 0x8e34 - PEX Error Capture Register 3 */ + char res25[452]; + char res26[4]; +} ccsr_pex_t; + +/* Hyper Transport Register Block (0xA000-0xB000) */ +typedef struct ccsr_ht { + uint hcfg_addr; /* 0xa000 - HT Configuration Address register */ + uint hcfg_data; /* 0xa004 - HT Configuration Data register */ + char res1[3064]; + uint howtar0; /* 0xac00 - HT Outbound Window 0 Translation register */ + char res2[12]; + uint howar0; /* 0xac10 - HT Outbound Window 0 Attributes register */ + char res3[12]; + uint howtar1; /* 0xac20 - HT Outbound Window 1 Translation register */ + char res4[4]; + uint howbar1; /* 0xac28 - HT Outbound Window 1 Base Address register */ + char res5[4]; + uint howar1; /* 0xac30 - HT Outbound Window 1 Attributes register */ + char res6[12]; + uint howtar2; /* 0xac40 - HT Outbound Window 2 Translation register */ + char res7[4]; + uint howbar2; /* 0xac48 - HT Outbound Window 2 Base Address register */ + char res8[4]; + uint howar2; /* 0xac50 - HT Outbound Window 2 Attributes register */ + char res9[12]; + uint howtar3; /* 0xac60 - HT Outbound Window 3 Translation register */ + char res10[4]; + uint howbar3; /* 0xac68 - HT Outbound Window 3 Base Address register */ + char res11[4]; + uint howar3; /* 0xac70 - HT Outbound Window 3 Attributes register */ + char res12[12]; + uint howtar4; /* 0xac80 - HT Outbound Window 4 Translation register */ + char res13[4]; + uint howbar4; /* 0xac88 - HT Outbound Window 4 Base Address register */ + char res14[4]; + uint howar4; /* 0xac90 - HT Outbound Window 4 Attributes register */ + char res15[236]; + uint hiwtar4; /* 0xad80 - HT Inbound Window 4 Translation register */ + char res16[4]; + uint hiwbar4; /* 0xad88 - HT Inbound Window 4 Base Address register */ + char res17[4]; + uint hiwar4; /* 0xad90 - HT Inbound Window 4 Attributes register */ + char res18[12]; + uint hiwtar3; /* 0xada0 - HT Inbound Window 3 Translation register */ + char res19[4]; + uint hiwbar3; /* 0xada8 - HT Inbound Window 3 Base Address register */ + char res20[4]; + uint hiwar3; /* 0xadb0 - HT Inbound Window 3 Attributes register */ + char res21[12]; + uint hiwtar2; /* 0xadc0 - HT Inbound Window 2 Translation register */ + char res22[4]; + uint hiwbar2; /* 0xadc8 - HT Inbound Window 2 Base Address register */ + char res23[4]; + uint hiwar2; /* 0xadd0 - HT Inbound Window 2 Attributes register */ + char res24[12]; + uint hiwtar1; /* 0xade0 - HT Inbound Window 1 Translation register */ + char res25[4]; + uint hiwbar1; /* 0xade8 - HT Inbound Window 1 Base Address register */ + char res26[4]; + uint hiwar1; /* 0xadf0 - HT Inbound Window 1 Attributes register */ + char res27[12]; + uint hedr; /* 0xae00 - HT Error Detect register */ + char res28[4]; + uint heier; /* 0xae08 - HT Error Interrupt Enable register */ + char res29[4]; + uint hecdr; /* 0xae10 - HT Error Capture Disbale register */ + char res30[12]; + uint hecsr; /* 0xae20 - HT Error Capture Status register */ + char res31[4]; + uint hec0; /* 0xae28 - HT Error Capture 0 register */ + uint hec1; /* 0xae2c - HT Error Capture 1 register */ + uint hec2; /* 0xae30 - HT Error Capture 2 register */ + char res32[460]; +} ccsr_ht_t; + +/* DMA Registers(0x2_1000-0x2_2000) */ +typedef struct ccsr_dma { + char res1[256]; + uint mr0; /* 0x21100 - DMA 0 Mode Register */ + uint sr0; /* 0x21104 - DMA 0 Status Register */ + char res2[4]; + uint clndar0; /* 0x2110c - DMA 0 Current Link Descriptor Address Register */ + uint satr0; /* 0x21110 - DMA 0 Source Attributes Register */ + uint sar0; /* 0x21114 - DMA 0 Source Address Register */ + uint datr0; /* 0x21118 - DMA 0 Destination Attributes Register */ + uint dar0; /* 0x2111c - DMA 0 Destination Address Register */ + uint bcr0; /* 0x21120 - DMA 0 Byte Count Register */ + char res3[4]; + uint nlndar0; /* 0x21128 - DMA 0 Next Link Descriptor Address Register */ + char res4[8]; + uint clabdar0; /* 0x21134 - DMA 0 Current List - Alternate Base Descriptor Address Register */ + char res5[4]; + uint nlsdar0; /* 0x2113c - DMA 0 Next List Descriptor Address Register */ + uint ssr0; /* 0x21140 - DMA 0 Source Stride Register */ + uint dsr0; /* 0x21144 - DMA 0 Destination Stride Register */ + char res6[56]; + uint mr1; /* 0x21180 - DMA 1 Mode Register */ + uint sr1; /* 0x21184 - DMA 1 Status Register */ + char res7[4]; + uint clndar1; /* 0x2118c - DMA 1 Current Link Descriptor Address Register */ + uint satr1; /* 0x21190 - DMA 1 Source Attributes Register */ + uint sar1; /* 0x21194 - DMA 1 Source Address Register */ + uint datr1; /* 0x21198 - DMA 1 Destination Attributes Register */ + uint dar1; /* 0x2119c - DMA 1 Destination Address Register */ + uint bcr1; /* 0x211a0 - DMA 1 Byte Count Register */ + char res8[4]; + uint nlndar1; /* 0x211a8 - DMA 1 Next Link Descriptor Address Register */ + char res9[8]; + uint clabdar1; /* 0x211b4 - DMA 1 Current List - Alternate Base Descriptor Address Register */ + char res10[4]; + uint nlsdar1; /* 0x211bc - DMA 1 Next List Descriptor Address Register */ + uint ssr1; /* 0x211c0 - DMA 1 Source Stride Register */ + uint dsr1; /* 0x211c4 - DMA 1 Destination Stride Register */ + char res11[56]; + uint mr2; /* 0x21200 - DMA 2 Mode Register */ + uint sr2; /* 0x21204 - DMA 2 Status Register */ + char res12[4]; + uint clndar2; /* 0x2120c - DMA 2 Current Link Descriptor Address Register */ + uint satr2; /* 0x21210 - DMA 2 Source Attributes Register */ + uint sar2; /* 0x21214 - DMA 2 Source Address Register */ + uint datr2; /* 0x21218 - DMA 2 Destination Attributes Register */ + uint dar2; /* 0x2121c - DMA 2 Destination Address Register */ + uint bcr2; /* 0x21220 - DMA 2 Byte Count Register */ + char res13[4]; + uint nlndar2; /* 0x21228 - DMA 2 Next Link Descriptor Address Register */ + char res14[8]; + uint clabdar2; /* 0x21234 - DMA 2 Current List - Alternate Base Descriptor Address Register */ + char res15[4]; + uint nlsdar2; /* 0x2123c - DMA 2 Next List Descriptor Address Register */ + uint ssr2; /* 0x21240 - DMA 2 Source Stride Register */ + uint dsr2; /* 0x21244 - DMA 2 Destination Stride Register */ + char res16[56]; + uint mr3; /* 0x21280 - DMA 3 Mode Register */ + uint sr3; /* 0x21284 - DMA 3 Status Register */ + char res17[4]; + uint clndar3; /* 0x2128c - DMA 3 Current Link Descriptor Address Register */ + uint satr3; /* 0x21290 - DMA 3 Source Attributes Register */ + uint sar3; /* 0x21294 - DMA 3 Source Address Register */ + uint datr3; /* 0x21298 - DMA 3 Destination Attributes Register */ + uint dar3; /* 0x2129c - DMA 3 Destination Address Register */ + uint bcr3; /* 0x212a0 - DMA 3 Byte Count Register */ + char res18[4]; + uint nlndar3; /* 0x212a8 - DMA 3 Next Link Descriptor Address Register */ + char res19[8]; + uint clabdar3; /* 0x212b4 - DMA 3 Current List - Alternate Base Descriptor Address Register */ + char res20[4]; + uint nlsdar3; /* 0x212bc - DMA 3 Next List Descriptor Address Register */ + uint ssr3; /* 0x212c0 - DMA 3 Source Stride Register */ + uint dsr3; /* 0x212c4 - DMA 3 Destination Stride Register */ + char res21[56]; + uint dgsr; /* 0x21300 - DMA General Status Register */ + char res22[3324]; +} ccsr_dma_t; + +/* tsec1-4: 24000-28000 */ +typedef struct ccsr_tsec { + uint id; /* 0x24000 - Controller ID Register */ + char res1[12]; + uint ievent; /* 0x24010 - Interrupt Event Register */ + uint imask; /* 0x24014 - Interrupt Mask Register */ + uint edis; /* 0x24018 - Error Disabled Register */ + char res2[4]; + uint ecntrl; /* 0x24020 - Ethernet Control Register */ + char res2_1[4]; + uint ptv; /* 0x24028 - Pause Time Value Register */ + uint dmactrl; /* 0x2402c - DMA Control Register */ + uint tbipa; /* 0x24030 - TBI PHY Address Register */ + char res3[88]; + uint fifo_tx_thr; /* 0x2408c - FIFO transmit threshold register */ + char res4[8]; + uint fifo_tx_starve; /* 0x24098 - FIFO transmit starve register */ + uint fifo_tx_starve_shutoff;/* 0x2409c - FIFO transmit starve shutoff register */ + char res4_1[4]; + uint fifo_rx_pause; /* 0x240a4 - FIFO receive pause threshold register */ + uint fifo_rx_alarm; /* 0x240a8 - FIFO receive alarm threshold register */ + char res5[84]; + uint tctrl; /* 0x24100 - Transmit Control Register */ + uint tstat; /* 0x24104 - Transmit Status Register */ + uint dfvlan; /* 0x24108 - Default VLAN control word */ + char res6[4]; + uint txic; /* 0x24110 - Transmit interrupt coalescing Register */ + uint tqueue; /* 0x24114 - Transmit Queue Control Register */ + char res7[40]; + uint tr03wt; /* 0x24140 - TxBD Rings 0-3 round-robin weightings */ + uint tw47wt; /* 0x24144 - TxBD Rings 4-7 round-robin weightings */ + char res8[52]; + uint tbdbph; /* 0x2417c - Transmit Data Buffer Pointer High Register */ + char res9[4]; + uint tbptr0; /* 0x24184 - Transmit Buffer Descriptor Pointer for Ring 0 */ + char res10[4]; + uint tbptr1; /* 0x2418C - Transmit Buffer Descriptor Pointer for Ring 1 */ + char res11[4]; + uint tbptr2; /* 0x24194 - Transmit Buffer Descriptor Pointer for Ring 2 */ + char res12[4]; + uint tbptr3; /* 0x2419C - Transmit Buffer Descriptor Pointer for Ring 3 */ + char res13[4]; + uint tbptr4; /* 0x241A4 - Transmit Buffer Descriptor Pointer for Ring 4 */ + char res14[4]; + uint tbptr5; /* 0x241AC - Transmit Buffer Descriptor Pointer for Ring 5 */ + char res15[4]; + uint tbptr6; /* 0x241B4 - Transmit Buffer Descriptor Pointer for Ring 6 */ + char res16[4]; + uint tbptr7; /* 0x241BC - Transmit Buffer Descriptor Pointer for Ring 7 */ + char res17[64]; + uint tbaseh; /* 0x24200 - Transmit Descriptor Base Address High Register */ + uint tbase0; /* 0x24204 - Transmit Descriptor Base Address Register of Ring 0 */ + char res18[4]; + uint tbase1; /* 0x2420C - Transmit Descriptor base address of Ring 1 */ + char res19[4]; + uint tbase2; /* 0x24214 - Transmit Descriptor base address of Ring 2 */ + char res20[4]; + uint tbase3; /* 0x2421C - Transmit Descriptor base address of Ring 3 */ + char res21[4]; + uint tbase4; /* 0x24224 - Transmit Descriptor base address of Ring 4 */ + char res22[4]; + uint tbase5; /* 0x2422C - Transmit Descriptor base address of Ring 5 */ + char res23[4]; + uint tbase6; /* 0x24234 - Transmit Descriptor base address of Ring 6 */ + char res24[4]; + uint tbase7; /* 0x2423C - Transmit Descriptor base address of Ring 7 */ + char res25[192]; + uint rctrl; /* 0x24300 - Receive Control Register */ + uint rstat; /* 0x24304 - Receive Status Register */ + char res26[8]; + uint rxic; /* 0x24310 - Receive Interrupt Coalecing Register */ + uint rqueue; /* 0x24314 - Receive queue control register */ + char res27[24]; + uint rbifx; /* 0x24330 - Receive bit field extract control Register */ + uint rqfar; /* 0x24334 - Receive queue filing table address Register */ + uint rqfcr; /* 0x24338 - Receive queue filing table control Register */ + uint rqfpr; /* 0x2433c - Receive queue filing table property Register */ + uint mrblr; /* 0x24340 - Maximum Receive Buffer Length Register */ + char res28[56]; + uint rbdbph; /* 0x2437C - Receive Data Buffer Pointer High */ + char res29[4]; + uint rbptr0; /* 0x24384 - Receive Buffer Descriptor Pointer for Ring 0 */ + char res30[4]; + uint rbptr1; /* 0x2438C - Receive Buffer Descriptor Pointer for Ring 1 */ + char res31[4]; + uint rbptr2; /* 0x24394 - Receive Buffer Descriptor Pointer for Ring 2 */ + char res32[4]; + uint rbptr3; /* 0x2439C - Receive Buffer Descriptor Pointer for Ring 3 */ + char res33[4]; + uint rbptr4; /* 0x243A4 - Receive Buffer Descriptor Pointer for Ring 4 */ + char res34[4]; + uint rbptr5; /* 0x243AC - Receive Buffer Descriptor Pointer for Ring 5 */ + char res35[4]; + uint rbptr6; /* 0x243B4 - Receive Buffer Descriptor Pointer for Ring 6 */ + char res36[4]; + uint rbptr7; /* 0x243BC - Receive Buffer Descriptor Pointer for Ring 7 */ + char res37[64]; + uint rbaseh; /* 0x24400 - Receive Descriptor Base Address High 0 */ + uint rbase0; /* 0x24404 - Receive Descriptor Base Address of Ring 0 */ + char res38[4]; + uint rbase1; /* 0x2440C - Receive Descriptor Base Address of Ring 1 */ + char res39[4]; + uint rbase2; /* 0x24414 - Receive Descriptor Base Address of Ring 2 */ + char res40[4]; + uint rbase3; /* 0x2441C - Receive Descriptor Base Address of Ring 3 */ + char res41[4]; + uint rbase4; /* 0x24424 - Receive Descriptor Base Address of Ring 4 */ + char res42[4]; + uint rbase5; /* 0x2442C - Receive Descriptor Base Address of Ring 5 */ + char res43[4]; + uint rbase6; /* 0x24434 - Receive Descriptor Base Address of Ring 6 */ + char res44[4]; + uint rbase7; /* 0x2443C - Receive Descriptor Base Address of Ring 7 */ + char res45[192]; + uint maccfg1; /* 0x24500 - MAC Configuration 1 Register */ + uint maccfg2; /* 0x24504 - MAC Configuration 2 Register */ + uint ipgifg; /* 0x24508 - Inter Packet Gap/Inter Frame Gap Register */ + uint hafdup; /* 0x2450c - Half Duplex Register */ + uint maxfrm; /* 0x24510 - Maximum Frame Length Register */ + char res46[12]; + uint miimcfg; /* 0x24520 - MII Management Configuration Register */ + uint miimcom; /* 0x24524 - MII Management Command Register */ + uint miimadd; /* 0x24528 - MII Management Address Register */ + uint miimcon; /* 0x2452c - MII Management Control Register */ + uint miimstat; /* 0x24530 - MII Management Status Register */ + uint miimind; /* 0x24534 - MII Management Indicator Register */ + uint ifctrl; /* 0x24538 - Interface Contrl Register */ + uint ifstat; /* 0x2453c - Interface Status Register */ + uint macstnaddr1; /* 0x24540 - Station Address Part 1 Register */ + uint macstnaddr2; /* 0x24544 - Station Address Part 2 Register */ + uint mac01addr1; /* 0x24548 - MAC exact match address 1, part 1 */ + uint mac01addr2; /* 0x2454C - MAC exact match address 1, part 2 */ + uint mac02addr1; /* 0x24550 - MAC exact match address 2, part 1 */ + uint mac02addr2; /* 0x24554 - MAC exact match address 2, part 2 */ + uint mac03addr1; /* 0x24558 - MAC exact match address 3, part 1 */ + uint mac03addr2; /* 0x2455C - MAC exact match address 3, part 2 */ + uint mac04addr1; /* 0x24560 - MAC exact match address 4, part 1 */ + uint mac04addr2; /* 0x24564 - MAC exact match address 4, part 2 */ + uint mac05addr1; /* 0x24568 - MAC exact match address 5, part 1 */ + uint mac05addr2; /* 0x2456C - MAC exact match address 5, part 2 */ + uint mac06addr1; /* 0x24570 - MAC exact match address 6, part 1 */ + uint mac06addr2; /* 0x24574 - MAC exact match address 6, part 2 */ + uint mac07addr1; /* 0x24578 - MAC exact match address 7, part 1 */ + uint mac07addr2; /* 0x2457C - MAC exact match address 7, part 2 */ + uint mac08addr1; /* 0x24580 - MAC exact match address 8, part 1 */ + uint mac08addr2; /* 0x24584 - MAC exact match address 8, part 2 */ + uint mac09addr1; /* 0x24588 - MAC exact match address 9, part 1 */ + uint mac09addr2; /* 0x2458C - MAC exact match address 9, part 2 */ + uint mac10addr1; /* 0x24590 - MAC exact match address 10, part 1 */ + uint mac10addr2; /* 0x24594 - MAC exact match address 10, part 2 */ + uint mac11addr1; /* 0x24598 - MAC exact match address 11, part 1 */ + uint mac11addr2; /* 0x2459C - MAC exact match address 11, part 2 */ + uint mac12addr1; /* 0x245A0 - MAC exact match address 12, part 1 */ + uint mac12addr2; /* 0x245A4 - MAC exact match address 12, part 2 */ + uint mac13addr1; /* 0x245A8 - MAC exact match address 13, part 1 */ + uint mac13addr2; /* 0x245AC - MAC exact match address 13, part 2 */ + uint mac14addr1; /* 0x245B0 - MAC exact match address 14, part 1 */ + uint mac14addr2; /* 0x245B4 - MAC exact match address 14, part 2 */ + uint mac15addr1; /* 0x245B8 - MAC exact match address 15, part 1 */ + uint mac15addr2; /* 0x245BC - MAC exact match address 15, part 2 */ + char res48[192]; + uint tr64; /* 0x24680 - Transmit and Receive 64-byte Frame Counter */ + uint tr127; /* 0x24684 - Transmit and Receive 65-127 byte Frame Counter */ + uint tr255; /* 0x24688 - Transmit and Receive 128-255 byte Frame Counter */ + uint tr511; /* 0x2468c - Transmit and Receive 256-511 byte Frame Counter */ + uint tr1k; /* 0x24690 - Transmit and Receive 512-1023 byte Frame Counter */ + uint trmax; /* 0x24694 - Transmit and Receive 1024-1518 byte Frame Counter */ + uint trmgv; /* 0x24698 - Transmit and Receive 1519-1522 byte Good VLAN Frame */ + uint rbyt; /* 0x2469c - Receive Byte Counter */ + uint rpkt; /* 0x246a0 - Receive Packet Counter */ + uint rfcs; /* 0x246a4 - Receive FCS Error Counter */ + uint rmca; /* 0x246a8 - Receive Multicast Packet Counter */ + uint rbca; /* 0x246ac - Receive Broadcast Packet Counter */ + uint rxcf; /* 0x246b0 - Receive Control Frame Packet Counter */ + uint rxpf; /* 0x246b4 - Receive Pause Frame Packet Counter */ + uint rxuo; /* 0x246b8 - Receive Unknown OP Code Counter */ + uint raln; /* 0x246bc - Receive Alignment Error Counter */ + uint rflr; /* 0x246c0 - Receive Frame Length Error Counter */ + uint rcde; /* 0x246c4 - Receive Code Error Counter */ + uint rcse; /* 0x246c8 - Receive Carrier Sense Error Counter */ + uint rund; /* 0x246cc - Receive Undersize Packet Counter */ + uint rovr; /* 0x246d0 - Receive Oversize Packet Counter */ + uint rfrg; /* 0x246d4 - Receive Fragments Counter */ + uint rjbr; /* 0x246d8 - Receive Jabber Counter */ + uint rdrp; /* 0x246dc - Receive Drop Counter */ + uint tbyt; /* 0x246e0 - Transmit Byte Counter Counter */ + uint tpkt; /* 0x246e4 - Transmit Packet Counter */ + uint tmca; /* 0x246e8 - Transmit Multicast Packet Counter */ + uint tbca; /* 0x246ec - Transmit Broadcast Packet Counter */ + uint txpf; /* 0x246f0 - Transmit Pause Control Frame Counter */ + uint tdfr; /* 0x246f4 - Transmit Deferral Packet Counter */ + uint tedf; /* 0x246f8 - Transmit Excessive Deferral Packet Counter */ + uint tscl; /* 0x246fc - Transmit Single Collision Packet Counter */ + uint tmcl; /* 0x24700 - Transmit Multiple Collision Packet Counter */ + uint tlcl; /* 0x24704 - Transmit Late Collision Packet Counter */ + uint txcl; /* 0x24708 - Transmit Excessive Collision Packet Counter */ + uint tncl; /* 0x2470c - Transmit Total Collision Counter */ + char res49[4]; + uint tdrp; /* 0x24714 - Transmit Drop Frame Counter */ + uint tjbr; /* 0x24718 - Transmit Jabber Frame Counter */ + uint tfcs; /* 0x2471c - Transmit FCS Error Counter */ + uint txcf; /* 0x24720 - Transmit Control Frame Counter */ + uint tovr; /* 0x24724 - Transmit Oversize Frame Counter */ + uint tund; /* 0x24728 - Transmit Undersize Frame Counter */ + uint tfrg; /* 0x2472c - Transmit Fragments Frame Counter */ + uint car1; /* 0x24730 - Carry Register One */ + uint car2; /* 0x24734 - Carry Register Two */ + uint cam1; /* 0x24738 - Carry Mask Register One */ + uint cam2; /* 0x2473c - Carry Mask Register Two */ + uint rrej; /* 0x24740 - Receive filer rejected packet counter */ + char res50[188]; + uint iaddr0; /* 0x24800 - Indivdual address register 0 */ + uint iaddr1; /* 0x24804 - Indivdual address register 1 */ + uint iaddr2; /* 0x24808 - Indivdual address register 2 */ + uint iaddr3; /* 0x2480c - Indivdual address register 3 */ + uint iaddr4; /* 0x24810 - Indivdual address register 4 */ + uint iaddr5; /* 0x24814 - Indivdual address register 5 */ + uint iaddr6; /* 0x24818 - Indivdual address register 6 */ + uint iaddr7; /* 0x2481c - Indivdual address register 7 */ + char res51[96]; + uint gaddr0; /* 0x24880 - Global address register 0 */ + uint gaddr1; /* 0x24884 - Global address register 1 */ + uint gaddr2; /* 0x24888 - Global address register 2 */ + uint gaddr3; /* 0x2488c - Global address register 3 */ + uint gaddr4; /* 0x24890 - Global address register 4 */ + uint gaddr5; /* 0x24894 - Global address register 5 */ + uint gaddr6; /* 0x24898 - Global address register 6 */ + uint gaddr7; /* 0x2489c - Global address register 7 */ + char res52[352]; + uint fifocfg; /* 0x24A00 - FIFO interface configuration register */ + char res53[500]; + uint attr; /* 0x24BF8 - DMA Attribute register */ + uint attreli; /* 0x24BFC - DMA Attribute extract length and index register */ + char res54[1024]; +} ccsr_tsec_t; + +/* PIC Registers(0x4_0000-0x6_1000) */ + +typedef struct ccsr_pic { + char res1[64]; + uint ipidr0; /* 0x40040 - Interprocessor Interrupt Dispatch Register 0 */ + char res2[12]; + uint ipidr1; /* 0x40050 - Interprocessor Interrupt Dispatch Register 1 */ + char res3[12]; + uint ipidr2; /* 0x40060 - Interprocessor Interrupt Dispatch Register 2 */ + char res4[12]; + uint ipidr3; /* 0x40070 - Interprocessor Interrupt Dispatch Register 3 */ + char res5[12]; + uint ctpr; /* 0x40080 - Current Task Priority Register */ + char res6[12]; + uint whoami; /* 0x40090 - Who Am I Register */ + char res7[12]; + uint iack; /* 0x400a0 - Interrupt Acknowledge Register */ + char res8[12]; + uint eoi; /* 0x400b0 - End Of Interrupt Register */ + char res9[3916]; + uint frr; /* 0x41000 - Feature Reporting Register */ + char res10[28]; + uint gcr; /* 0x41020 - Global Configuration Register */ + char res11[92]; + uint vir; /* 0x41080 - Vendor Identification Register */ + char res12[12]; + uint pir; /* 0x41090 - Processor Initialization Register */ + char res13[12]; + uint ipivpr0; /* 0x410a0 - IPI Vector/Priority Register 0 */ + char res14[12]; + uint ipivpr1; /* 0x410b0 - IPI Vector/Priority Register 1 */ + char res15[12]; + uint ipivpr2; /* 0x410c0 - IPI Vector/Priority Register 2 */ + char res16[12]; + uint ipivpr3; /* 0x410d0 - IPI Vector/Priority Register 3 */ + char res17[12]; + uint svr; /* 0x410e0 - Spurious Vector Register */ + char res18[12]; + uint tfrr; /* 0x410f0 - Timer Frequency Reporting Register */ + char res19[12]; + uint gtccr0; /* 0x41100 - Global Timer Current Count Register 0 */ + char res20[12]; + uint gtbcr0; /* 0x41110 - Global Timer Base Count Register 0 */ + char res21[12]; + uint gtvpr0; /* 0x41120 - Global Timer Vector/Priority Register 0 */ + char res22[12]; + uint gtdr0; /* 0x41130 - Global Timer Destination Register 0 */ + char res23[12]; + uint gtccr1; /* 0x41140 - Global Timer Current Count Register 1 */ + char res24[12]; + uint gtbcr1; /* 0x41150 - Global Timer Base Count Register 1 */ + char res25[12]; + uint gtvpr1; /* 0x41160 - Global Timer Vector/Priority Register 1 */ + char res26[12]; + uint gtdr1; /* 0x41170 - Global Timer Destination Register 1 */ + char res27[12]; + uint gtccr2; /* 0x41180 - Global Timer Current Count Register 2 */ + char res28[12]; + uint gtbcr2; /* 0x41190 - Global Timer Base Count Register 2 */ + char res29[12]; + uint gtvpr2; /* 0x411a0 - Global Timer Vector/Priority Register 2 */ + char res30[12]; + uint gtdr2; /* 0x411b0 - Global Timer Destination Register 2 */ + char res31[12]; + uint gtccr3; /* 0x411c0 - Global Timer Current Count Register 3 */ + char res32[12]; + uint gtbcr3; /* 0x411d0 - Global Timer Base Count Register 3 */ + char res33[12]; + uint gtvpr3; /* 0x411e0 - Global Timer Vector/Priority Register 3 */ + char res34[12]; + uint gtdr3; /* 0x411f0 - Global Timer Destination Register 3 */ + char res35[268]; + uint tcr; /* 0x41300 - Timer Control Register */ + char res36[12]; + uint irqsr0; /* 0x41310 - IRQ_OUT Summary Register 0 */ + char res37[12]; + uint irqsr1; /* 0x41320 - IRQ_OUT Summary Register 1 */ + char res38[12]; + uint cisr0; /* 0x41330 - Critical Interrupt Summary Register 0 */ + char res39[12]; + uint cisr1; /* 0x41340 - Critical Interrupt Summary Register 1 */ + char res40[12]; + uint pm0mr0; /* 0x41350 - Performance monitor 0 mask register 0 */ + char res41[12]; + uint pm0mr1; /* 0x41360 - Performance monitor 0 mask register 1 */ + char res42[12]; + uint pm1mr0; /* 0x41370 - Performance monitor 1 mask register 0 */ + char res43[12]; + uint pm1mr1; /* 0x41380 - Performance monitor 1 mask register 1 */ + char res44[12]; + uint pm2mr0; /* 0x41390 - Performance monitor 2 mask register 0 */ + char res45[12]; + uint pm2mr1; /* 0x413A0 - Performance monitor 2 mask register 1 */ + char res46[12]; + uint pm3mr0; /* 0x413B0 - Performance monitor 3 mask register 0 */ + char res47[12]; + uint pm3mr1; /* 0x413C0 - Performance monitor 3 mask register 1 */ + char res48[60]; + uint msgr0; /* 0x41400 - Message Register 0 */ + char res49[12]; + uint msgr1; /* 0x41410 - Message Register 1 */ + char res50[12]; + uint msgr2; /* 0x41420 - Message Register 2 */ + char res51[12]; + uint msgr3; /* 0x41430 - Message Register 3 */ + char res52[204]; + uint mer; /* 0x41500 - Message Enable Register */ + char res53[12]; + uint msr; /* 0x41510 - Message Status Register */ + char res54[60140]; + uint eivpr0; /* 0x50000 - External Interrupt Vector/Priority Register 0 */ + char res55[12]; + uint eidr0; /* 0x50010 - External Interrupt Destination Register 0 */ + char res56[12]; + uint eivpr1; /* 0x50020 - External Interrupt Vector/Priority Register 1 */ + char res57[12]; + uint eidr1; /* 0x50030 - External Interrupt Destination Register 1 */ + char res58[12]; + uint eivpr2; /* 0x50040 - External Interrupt Vector/Priority Register 2 */ + char res59[12]; + uint eidr2; /* 0x50050 - External Interrupt Destination Register 2 */ + char res60[12]; + uint eivpr3; /* 0x50060 - External Interrupt Vector/Priority Register 3 */ + char res61[12]; + uint eidr3; /* 0x50070 - External Interrupt Destination Register 3 */ + char res62[12]; + uint eivpr4; /* 0x50080 - External Interrupt Vector/Priority Register 4 */ + char res63[12]; + uint eidr4; /* 0x50090 - External Interrupt Destination Register 4 */ + char res64[12]; + uint eivpr5; /* 0x500a0 - External Interrupt Vector/Priority Register 5 */ + char res65[12]; + uint eidr5; /* 0x500b0 - External Interrupt Destination Register 5 */ + char res66[12]; + uint eivpr6; /* 0x500c0 - External Interrupt Vector/Priority Register 6 */ + char res67[12]; + uint eidr6; /* 0x500d0 - External Interrupt Destination Register 6 */ + char res68[12]; + uint eivpr7; /* 0x500e0 - External Interrupt Vector/Priority Register 7 */ + char res69[12]; + uint eidr7; /* 0x500f0 - External Interrupt Destination Register 7 */ + char res70[12]; + uint eivpr8; /* 0x50100 - External Interrupt Vector/Priority Register 8 */ + char res71[12]; + uint eidr8; /* 0x50110 - External Interrupt Destination Register 8 */ + char res72[12]; + uint eivpr9; /* 0x50120 - External Interrupt Vector/Priority Register 9 */ + char res73[12]; + uint eidr9; /* 0x50130 - External Interrupt Destination Register 9 */ + char res74[12]; + uint eivpr10; /* 0x50140 - External Interrupt Vector/Priority Register 10 */ + char res75[12]; + uint eidr10; /* 0x50150 - External Interrupt Destination Register 10 */ + char res76[12]; + uint eivpr11; /* 0x50160 - External Interrupt Vector/Priority Register 11 */ + char res77[12]; + uint eidr11; /* 0x50170 - External Interrupt Destination Register 11 */ + char res78[140]; + uint iivpr0; /* 0x50200 - Internal Interrupt Vector/Priority Register 0 */ + char res79[12]; + uint iidr0; /* 0x50210 - Internal Interrupt Destination Register 0 */ + char res80[12]; + uint iivpr1; /* 0x50220 - Internal Interrupt Vector/Priority Register 1 */ + char res81[12]; + uint iidr1; /* 0x50230 - Internal Interrupt Destination Register 1 */ + char res82[12]; + uint iivpr2; /* 0x50240 - Internal Interrupt Vector/Priority Register 2 */ + char res83[12]; + uint iidr2; /* 0x50250 - Internal Interrupt Destination Register 2 */ + char res84[12]; + uint iivpr3; /* 0x50260 - Internal Interrupt Vector/Priority Register 3 */ + char res85[12]; + uint iidr3; /* 0x50270 - Internal Interrupt Destination Register 3 */ + char res86[12]; + uint iivpr4; /* 0x50280 - Internal Interrupt Vector/Priority Register 4 */ + char res87[12]; + uint iidr4; /* 0x50290 - Internal Interrupt Destination Register 4 */ + char res88[12]; + uint iivpr5; /* 0x502a0 - Internal Interrupt Vector/Priority Register 5 */ + char res89[12]; + uint iidr5; /* 0x502b0 - Internal Interrupt Destination Register 5 */ + char res90[12]; + uint iivpr6; /* 0x502c0 - Internal Interrupt Vector/Priority Register 6 */ + char res91[12]; + uint iidr6; /* 0x502d0 - Internal Interrupt Destination Register 6 */ + char res92[12]; + uint iivpr7; /* 0x502e0 - Internal Interrupt Vector/Priority Register 7 */ + char res93[12]; + uint iidr7; /* 0x502f0 - Internal Interrupt Destination Register 7 */ + char res94[12]; + uint iivpr8; /* 0x50300 - Internal Interrupt Vector/Priority Register 8 */ + char res95[12]; + uint iidr8; /* 0x50310 - Internal Interrupt Destination Register 8 */ + char res96[12]; + uint iivpr9; /* 0x50320 - Internal Interrupt Vector/Priority Register 9 */ + char res97[12]; + uint iidr9; /* 0x50330 - Internal Interrupt Destination Register 9 */ + char res98[12]; + uint iivpr10; /* 0x50340 - Internal Interrupt Vector/Priority Register 10 */ + char res99[12]; + uint iidr10; /* 0x50350 - Internal Interrupt Destination Register 10 */ + char res100[12]; + uint iivpr11; /* 0x50360 - Internal Interrupt Vector/Priority Register 11 */ + char res101[12]; + uint iidr11; /* 0x50370 - Internal Interrupt Destination Register 11 */ + char res102[12]; + uint iivpr12; /* 0x50380 - Internal Interrupt Vector/Priority Register 12 */ + char res103[12]; + uint iidr12; /* 0x50390 - Internal Interrupt Destination Register 12 */ + char res104[12]; + uint iivpr13; /* 0x503a0 - Internal Interrupt Vector/Priority Register 13 */ + char res105[12]; + uint iidr13; /* 0x503b0 - Internal Interrupt Destination Register 13 */ + char res106[12]; + uint iivpr14; /* 0x503c0 - Internal Interrupt Vector/Priority Register 14 */ + char res107[12]; + uint iidr14; /* 0x503d0 - Internal Interrupt Destination Register 14 */ + char res108[12]; + uint iivpr15; /* 0x503e0 - Internal Interrupt Vector/Priority Register 15 */ + char res109[12]; + uint iidr15; /* 0x503f0 - Internal Interrupt Destination Register 15 */ + char res110[12]; + uint iivpr16; /* 0x50400 - Internal Interrupt Vector/Priority Register 16 */ + char res111[12]; + uint iidr16; /* 0x50410 - Internal Interrupt Destination Register 16 */ + char res112[12]; + uint iivpr17; /* 0x50420 - Internal Interrupt Vector/Priority Register 17 */ + char res113[12]; + uint iidr17; /* 0x50430 - Internal Interrupt Destination Register 17 */ + char res114[12]; + uint iivpr18; /* 0x50440 - Internal Interrupt Vector/Priority Register 18 */ + char res115[12]; + uint iidr18; /* 0x50450 - Internal Interrupt Destination Register 18 */ + char res116[12]; + uint iivpr19; /* 0x50460 - Internal Interrupt Vector/Priority Register 19 */ + char res117[12]; + uint iidr19; /* 0x50470 - Internal Interrupt Destination Register 19 */ + char res118[12]; + uint iivpr20; /* 0x50480 - Internal Interrupt Vector/Priority Register 20 */ + char res119[12]; + uint iidr20; /* 0x50490 - Internal Interrupt Destination Register 20 */ + char res120[12]; + uint iivpr21; /* 0x504a0 - Internal Interrupt Vector/Priority Register 21 */ + char res121[12]; + uint iidr21; /* 0x504b0 - Internal Interrupt Destination Register 21 */ + char res122[12]; + uint iivpr22; /* 0x504c0 - Internal Interrupt Vector/Priority Register 22 */ + char res123[12]; + uint iidr22; /* 0x504d0 - Internal Interrupt Destination Register 22 */ + char res124[12]; + uint iivpr23; /* 0x504e0 - Internal Interrupt Vector/Priority Register 23 */ + char res125[12]; + uint iidr23; /* 0x504f0 - Internal Interrupt Destination Register 23 */ + char res126[12]; + uint iivpr24; /* 0x50500 - Internal Interrupt Vector/Priority Register 24 */ + char res127[12]; + uint iidr24; /* 0x50510 - Internal Interrupt Destination Register 24 */ + char res128[12]; + uint iivpr25; /* 0x50520 - Internal Interrupt Vector/Priority Register 25 */ + char res129[12]; + uint iidr25; /* 0x50530 - Internal Interrupt Destination Register 25 */ + char res130[12]; + uint iivpr26; /* 0x50540 - Internal Interrupt Vector/Priority Register 26 */ + char res131[12]; + uint iidr26; /* 0x50550 - Internal Interrupt Destination Register 26 */ + char res132[12]; + uint iivpr27; /* 0x50560 - Internal Interrupt Vector/Priority Register 27 */ + char res133[12]; + uint iidr27; /* 0x50570 - Internal Interrupt Destination Register 27 */ + char res134[12]; + uint iivpr28; /* 0x50580 - Internal Interrupt Vector/Priority Register 28 */ + char res135[12]; + uint iidr28; /* 0x50590 - Internal Interrupt Destination Register 28 */ + char res136[12]; + uint iivpr29; /* 0x505a0 - Internal Interrupt Vector/Priority Register 29 */ + char res137[12]; + uint iidr29; /* 0x505b0 - Internal Interrupt Destination Register 29 */ + char res138[12]; + uint iivpr30; /* 0x505c0 - Internal Interrupt Vector/Priority Register 30 */ + char res139[12]; + uint iidr30; /* 0x505d0 - Internal Interrupt Destination Register 30 */ + char res140[12]; + uint iivpr31; /* 0x505e0 - Internal Interrupt Vector/Priority Register 31 */ + char res141[12]; + uint iidr31; /* 0x505f0 - Internal Interrupt Destination Register 31 */ + char res142[4108]; + uint mivpr0; /* 0x51600 - Messaging Interrupt Vector/Priority Register 0 */ + char res143[12]; + uint midr0; /* 0x51610 - Messaging Interrupt Destination Register 0 */ + char res144[12]; + uint mivpr1; /* 0x51620 - Messaging Interrupt Vector/Priority Register 1 */ + char res145[12]; + uint midr1; /* 0x51630 - Messaging Interrupt Destination Register 1 */ + char res146[12]; + uint mivpr2; /* 0x51640 - Messaging Interrupt Vector/Priority Register 2 */ + char res147[12]; + uint midr2; /* 0x51650 - Messaging Interrupt Destination Register 2 */ + char res148[12]; + uint mivpr3; /* 0x51660 - Messaging Interrupt Vector/Priority Register 3 */ + char res149[12]; + uint midr3; /* 0x51670 - Messaging Interrupt Destination Register 3 */ + char res150[59852]; + uint ipi0dr0; /* 0x60040 - Processor 0 Interprocessor Interrupt Dispatch Register 0 */ + char res151[12]; + uint ipi0dr1; /* 0x60050 - Processor 0 Interprocessor Interrupt Dispatch Register 1 */ + char res152[12]; + uint ipi0dr2; /* 0x60060 - Processor 0 Interprocessor Interrupt Dispatch Register 2 */ + char res153[12]; + uint ipi0dr3; /* 0x60070 - Processor 0 Interprocessor Interrupt Dispatch Register 3 */ + char res154[12]; + uint ctpr0; /* 0x60080 - Current Task Priority Register for Processor 0 */ + char res155[12]; + uint whoami0; /* 0x60090 - Who Am I Register for Processor 0 */ + char res156[12]; + uint iack0; /* 0x600a0 - Interrupt Acknowledge Register for Processor 0 */ + char res157[12]; + uint eoi0; /* 0x600b0 - End Of Interrupt Register for Processor 0 */ + char res158[3916]; +} ccsr_pic_t; + +/* RapidIO Registers(0xc_0000-0xe_0000) */ + +typedef struct ccsr_rio { + uint didcar; /* 0xc0000 - Device Identity Capability Register */ + uint dicar; /* 0xc0004 - Device Information Capability Register */ + uint aidcar; /* 0xc0008 - Assembly Identity Capability Register */ + uint aicar; /* 0xc000c - Assembly Information Capability Register */ + uint pefcar; /* 0xc0010 - Processing Element Features Capability Register */ + uint spicar; /* 0xc0014 - Switch Port Information Capability Register */ + uint socar; /* 0xc0018 - Source Operations Capability Register */ + uint docar; /* 0xc001c - Destination Operations Capability Register */ + char res1[32]; + uint msr; /* 0xc0040 - Mailbox Command And Status Register */ + uint pwdcsr; /* 0xc0044 - Port-Write and Doorbell Command And Status Register */ + char res2[4]; + uint pellccsr; /* 0xc004c - Processing Element Logic Layer Control Command and Status Register */ + char res3[12]; + uint lcsbacsr; /* 0xc005c - Local Configuration Space Base Address Command and Status Register */ + uint bdidcsr; /* 0xc0060 - Base Device ID Command and Status Register */ + char res4[4]; + uint hbdidlcsr; /* 0xc0068 - Host Base Device ID Lock Command and Status Register */ + uint ctcsr; /* 0xc006c - Component Tag Command and Status Register */ + char res5[144]; + uint pmbh0csr; /* 0xc0100 - 8/16 LP-LVDS Port Maintenance Block Header 0 Command and Status Register */ + char res6[28]; + uint pltoccsr; /* 0xc0120 - Port Link Time-out Control Command and Status Register */ + uint prtoccsr; /* 0xc0124 - Port Response Time-out Control Command and Status Register */ + char res7[20]; + uint pgccsr; /* 0xc013c - Port General Command and Status Register */ + uint plmreqcsr; /* 0xc0140 - Port Link Maintenance Request Command and Status Register */ + uint plmrespcsr; /* 0xc0144 - Port Link Maintenance Response Command and Status Register */ + uint plascsr; /* 0xc0148 - Port Local Ackid Status Command and Status Register */ + char res8[12]; + uint pescsr; /* 0xc0158 - Port Error and Status Command and Status Register */ + uint pccsr; /* 0xc015c - Port Control Command and Status Register */ + char res9[1184]; + uint erbh; /* 0xc0600 - Error Reporting Block Header Register */ + char res10[4]; + uint ltledcsr; /* 0xc0608 - Logical/Transport layer error detect status register */ + uint ltleecsr; /* 0xc060c - Logical/Transport layer error enable register */ + char res11[4]; + uint ltlaccsr; /* 0xc0614 - Logical/Transport layer addresss capture register */ + uint ltldidccsr; /* 0xc0618 - Logical/Transport layer device ID capture register */ + uint ltlcccsr; /* 0xc061c - Logical/Transport layer control capture register */ + char res12[32]; + uint edcsr; /* 0xc0640 - Port 0 error detect status register */ + uint erecsr; /* 0xc0644 - Port 0 error rate enable status register */ + uint ecacsr; /* 0xc0648 - Port 0 error capture attributes register */ + uint pcseccsr0; /* 0xc064c - Port 0 packet/control symbol error capture register 0 */ + uint peccsr1; /* 0xc0650 - Port 0 error capture command and status register 1 */ + uint peccsr2; /* 0xc0654 - Port 0 error capture command and status register 2 */ + uint peccsr3; /* 0xc0658 - Port 0 error capture command and status register 3 */ + char res13[12]; + uint ercsr; /* 0xc0668 - Port 0 error rate command and status register */ + uint ertcsr; /* 0xc066C - Port 0 error rate threshold status register*/ + char res14[63892]; + uint llcr; /* 0xd0004 - Logical Layer Configuration Register */ + char res15[12]; + uint epwisr; /* 0xd0010 - Error / Port-Write Interrupt Status Register */ + char res16[12]; + uint lretcr; /* 0xd0020 - Logical Retry Error Threshold Configuration Register */ + char res17[92]; + uint pretcr; /* 0xd0080 - Physical Retry Erorr Threshold Configuration Register */ + char res18[124]; + uint adidcsr; /* 0xd0100 - Port 0 Alt. Device ID Command and Status Register */ + char res19[28]; + uint ptaacr; /* 0xd0120 - Port 0 Pass-Through/Accept-All Configuration Register */ + char res20[12]; + uint iecsr; /* 0xd0130 - Port 0 Implementation Error Status Register */ + char res21[12]; + uint pcr; /* 0xd0140 - Port 0 Phsyical Configuration RegisterRegister */ + char res22[20]; + uint slcsr; /* 0xd0158 - Port 0 Serial Link Command and Status Register */ + char res23[4]; + uint sleir; /* 0xd0160 - Port 0 Serial Link Error Injection Register */ + char res24[2716]; + uint rowtar0; /* 0xd0c00 - RapidIO Outbound Window Translation Address Register 0 */ + uint rowtear0; /* 0xd0c04 - RapidIO Outbound Window Translation Ext. Address Register 0 */ + char res25[8]; + uint rowar0; /* 0xd0c10 - RapidIO Outbound Attributes Register 0 */ + char res26[12]; + uint rowtar1; /* 0xd0c20 - RapidIO Outbound Window Translation Address Register 1 */ + uint rowtear1; /* 0xd0c24 - RapidIO Outbound Window Translation Ext. Address Register 1 */ + uint rowbar1; /* 0xd0c28 - RapidIO Outbound Window Base Address Register 1 */ + char res27[4]; + uint rowar1; /* 0xd0c30 - RapidIO Outbound Attributes Register 1 */ + uint rows1r1; /* 0xd0c34 - RapidIO Outbound Window Segment 1 Register 1 */ + uint rows2r1; /* 0xd0c38 - RapidIO Outbound Window Segment 2 Register 1 */ + uint rows3r1; /* 0xd0c3c - RapidIO Outbound Window Segment 3 Register 1 */ + uint rowtar2; /* 0xd0c40 - RapidIO Outbound Window Translation Address Register 2 */ + uint rowtear2; /* 0xd0c44 - RapidIO Outbound Window Translation Ext. Address Register 2 */ + uint rowbar2; /* 0xd0c48 - RapidIO Outbound Window Base Address Register 2 */ + char res28[4]; + uint rowar2; /* 0xd0c50 - RapidIO Outbound Attributes Register 2 */ + uint rows1r2; /* 0xd0c54 - RapidIO Outbound Window Segment 1 Register 2 */ + uint rows2r2; /* 0xd0c58 - RapidIO Outbound Window Segment 2 Register 2 */ + uint rows3r2; /* 0xd0c5c - RapidIO Outbound Window Segment 3 Register 2 */ + uint rowtar3; /* 0xd0c60 - RapidIO Outbound Window Translation Address Register 3 */ + uint rowtear3; /* 0xd0c64 - RapidIO Outbound Window Translation Ext. Address Register 3 */ + uint rowbar3; /* 0xd0c68 - RapidIO Outbound Window Base Address Register 3 */ + char res29[4]; + uint rowar3; /* 0xd0c70 - RapidIO Outbound Attributes Register 3 */ + uint rows1r3; /* 0xd0c74 - RapidIO Outbound Window Segment 1 Register 3 */ + uint rows2r3; /* 0xd0c78 - RapidIO Outbound Window Segment 2 Register 3 */ + uint rows3r3; /* 0xd0c7c - RapidIO Outbound Window Segment 3 Register 3 */ + uint rowtar4; /* 0xd0c80 - RapidIO Outbound Window Translation Address Register 4 */ + uint rowtear4; /* 0xd0c84 - RapidIO Outbound Window Translation Ext. Address Register 4 */ + uint rowbar4; /* 0xd0c88 - RapidIO Outbound Window Base Address Register 4 */ + char res30[4]; + uint rowar4; /* 0xd0c90 - RapidIO Outbound Attributes Register 4 */ + uint rows1r4; /* 0xd0c94 - RapidIO Outbound Window Segment 1 Register 4 */ + uint rows2r4; /* 0xd0c98 - RapidIO Outbound Window Segment 2 Register 4 */ + uint rows3r4; /* 0xd0c9c - RapidIO Outbound Window Segment 3 Register 4 */ + uint rowtar5; /* 0xd0ca0 - RapidIO Outbound Window Translation Address Register 5 */ + uint rowtear5; /* 0xd0ca4 - RapidIO Outbound Window Translation Ext. Address Register 5 */ + uint rowbar5; /* 0xd0ca8 - RapidIO Outbound Window Base Address Register 5 */ + char res31[4]; + uint rowar5; /* 0xd0cb0 - RapidIO Outbound Attributes Register 5 */ + uint rows1r5; /* 0xd0cb4 - RapidIO Outbound Window Segment 1 Register 5 */ + uint rows2r5; /* 0xd0cb8 - RapidIO Outbound Window Segment 2 Register 5 */ + uint rows3r5; /* 0xd0cbc - RapidIO Outbound Window Segment 3 Register 5 */ + uint rowtar6; /* 0xd0cc0 - RapidIO Outbound Window Translation Address Register 6 */ + uint rowtear6; /* 0xd0cc4 - RapidIO Outbound Window Translation Ext. Address Register 6 */ + uint rowbar6; /* 0xd0cc8 - RapidIO Outbound Window Base Address Register 6 */ + char res32[4]; + uint rowar6; /* 0xd0cd0 - RapidIO Outbound Attributes Register 6 */ + uint rows1r6; /* 0xd0cd4 - RapidIO Outbound Window Segment 1 Register 6 */ + uint rows2r6; /* 0xd0cd8 - RapidIO Outbound Window Segment 2 Register 6 */ + uint rows3r6; /* 0xd0cdc - RapidIO Outbound Window Segment 3 Register 6 */ + uint rowtar7; /* 0xd0ce0 - RapidIO Outbound Window Translation Address Register 7 */ + uint rowtear7; /* 0xd0ce4 - RapidIO Outbound Window Translation Ext. Address Register 7 */ + uint rowbar7; /* 0xd0ce8 - RapidIO Outbound Window Base Address Register 7 */ + char res33[4]; + uint rowar7; /* 0xd0cf0 - RapidIO Outbound Attributes Register 7 */ + uint rows1r7; /* 0xd0cf4 - RapidIO Outbound Window Segment 1 Register 7 */ + uint rows2r7; /* 0xd0cf8 - RapidIO Outbound Window Segment 2 Register 7 */ + uint rows3r7; /* 0xd0cfc - RapidIO Outbound Window Segment 3 Register 7 */ + uint rowtar8; /* 0xd0d00 - RapidIO Outbound Window Translation Address Register 8 */ + uint rowtear8; /* 0xd0d04 - RapidIO Outbound Window Translation Ext. Address Register 8 */ + uint rowbar8; /* 0xd0d08 - RapidIO Outbound Window Base Address Register 8 */ + char res34[4]; + uint rowar8; /* 0xd0d10 - RapidIO Outbound Attributes Register 8 */ + uint rows1r8; /* 0xd0d14 - RapidIO Outbound Window Segment 1 Register 8 */ + uint rows2r8; /* 0xd0d18 - RapidIO Outbound Window Segment 2 Register 8 */ + uint rows3r8; /* 0xd0d1c - RapidIO Outbound Window Segment 3 Register 8 */ + char res35[64]; + uint riwtar4; /* 0xd0d60 - RapidIO Inbound Window Translation Address Register 4 */ + uint riwbar4; /* 0xd0d68 - RapidIO Inbound Window Base Address Register 4 */ + char res36[4]; + uint riwar4; /* 0xd0d70 - RapidIO Inbound Attributes Register 4 */ + char res37[12]; + uint riwtar3; /* 0xd0d80 - RapidIO Inbound Window Translation Address Register 3 */ + char res38[4]; + uint riwbar3; /* 0xd0d88 - RapidIO Inbound Window Base Address Register 3 */ + char res39[4]; + uint riwar3; /* 0xd0d90 - RapidIO Inbound Attributes Register 3 */ + char res40[12]; + uint riwtar2; /* 0xd0da0 - RapidIO Inbound Window Translation Address Register 2 */ + char res41[4]; + uint riwbar2; /* 0xd0da8 - RapidIO Inbound Window Base Address Register 2 */ + char res42[4]; + uint riwar2; /* 0xd0db0 - RapidIO Inbound Attributes Register 2 */ + char res43[12]; + uint riwtar1; /* 0xd0dc0 - RapidIO Inbound Window Translation Address Register 1 */ + char res44[4]; + uint riwbar1; /* 0xd0dc8 - RapidIO Inbound Window Base Address Register 1 */ + char res45[4]; + uint riwar1; /* 0xd0dd0 - RapidIO Inbound Attributes Register 1 */ + char res46[12]; + uint riwtar0; /* 0xd0de0 - RapidIO Inbound Window Translation Address Register 0 */ + char res47[12]; + uint riwar0; /* 0xd0df0 - RapidIO Inbound Attributes Register 0 */ + char res48[12]; + uint pnfedr; /* 0xd0e00 - Port Notification/Fatal Error Detect Register */ + uint pnfedir; /* 0xd0e04 - Port Notification/Fatal Error Detect Register */ + uint pnfeier; /* 0xd0e08 - Port Notification/Fatal Error Interrupt Enable Register */ + uint pecr; /* 0xd0e0c - Port Error Control Register */ + uint pepcsr0; /* 0xd0e10 - Port Error Packet/Control Symbol Register 0 */ + uint pepr1; /* 0xd0e14 - Port Error Packet Register 1 */ + uint pepr2; /* 0xd0e18 - Port Error Packet Register 2 */ + char res49[4]; + uint predr; /* 0xd0e20 - Port Recoverable Error Detect Register */ + char res50[4]; + uint pertr; /* 0xd0e28 - Port Error Recovery Threshold Register */ + uint prtr; /* 0xd0e2c - Port Retry Threshold Register */ + char res51[8656]; + uint omr; /* 0xd3000 - Outbound Mode Register */ + uint osr; /* 0xd3004 - Outbound Status Register */ + uint eodqtpar; /* 0xd3008 - Extended Outbound Descriptor Queue Tail Pointer Address Register */ + uint odqtpar; /* 0xd300c - Outbound Descriptor Queue Tail Pointer Address Register */ + uint eosar; /* 0xd3010 - Extended Outbound Unit Source Address Register */ + uint osar; /* 0xd3014 - Outbound Unit Source Address Register */ + uint odpr; /* 0xd3018 - Outbound Destination Port Register */ + uint odatr; /* 0xd301c - Outbound Destination Attributes Register */ + uint odcr; /* 0xd3020 - Outbound Doubleword Count Register */ + uint eodqhpar; /* 0xd3024 - Extended Outbound Descriptor Queue Head Pointer Address Register */ + uint odqhpar; /* 0xd3028 - Outbound Descriptor Queue Head Pointer Address Register */ + uint oretr; /* 0xd302C - Outbound Retry Error Threshold Register */ + uint omgr; /* 0xd3030 - Outbound Multicast Group Register */ + uint omlr; /* 0xd3034 - Outbound Multicast List Register */ + char res52[40]; + uint imr; /* 0xd3060 - Outbound Mode Register */ + uint isr; /* 0xd3064 - Inbound Status Register */ + uint eidqtpar; /* 0xd3068 - Extended Inbound Descriptor Queue Tail Pointer Address Register */ + uint idqtpar; /* 0xd306c - Inbound Descriptor Queue Tail Pointer Address Register */ + uint eifqhpar; /* 0xd3070 - Extended Inbound Frame Queue Head Pointer Address Register */ + uint ifqhpar; /* 0xd3074 - Inbound Frame Queue Head Pointer Address Register */ + uint imirir; /* 0xd3078 - Inbound Maximum Interrutp Report Interval Register */ + char res53[900]; + uint oddmr; /* 0xd3400 - Outbound Doorbell Mode Register */ + uint oddsr; /* 0xd3404 - Outbound Doorbell Status Register */ + char res54[16]; + uint oddpr; /* 0xd3418 - Outbound Doorbell Destination Port Register */ + uint oddatr; /* 0xd341C - Outbound Doorbell Destination Attributes Register */ + char res55[12]; + uint oddretr; /* 0xd342C - Outbound Doorbell Retry Threshold Configuration Register */ + char res56[48]; + uint idmr; /* 0xd3460 - Inbound Doorbell Mode Register */ + uint idsr; /* 0xd3464 - Inbound Doorbell Status Register */ + uint iedqtpar; /* 0xd3468 - Extended Inbound Doorbell Queue Tail Pointer Address Register */ + uint iqtpar; /* 0xd346c - Inbound Doorbell Queue Tail Pointer Address Register */ + uint iedqhpar; /* 0xd3470 - Extended Inbound Doorbell Queue Head Pointer Address Register */ + uint idqhpar; /* 0xd3474 - Inbound Doorbell Queue Head Pointer Address Register */ + uint idmirir; /* 0xd3478 - Inbound Doorbell Max Interrupt Report Interval Register */ + char res57[100]; + uint pwmr; /* 0xd34e0 - Port-Write Mode Register */ + uint pwsr; /* 0xd34e4 - Port-Write Status Register */ + uint epwqbar; /* 0xd34e8 - Extended Port-Write Queue Base Address Register */ + uint pwqbar; /* 0xd34ec - Port-Write Queue Base Address Register */ + char res58[51984]; +} ccsr_rio_t; + +/* Global Utilities Register Block(0xe_0000-0xf_ffff) */ +typedef struct ccsr_gur { + uint porpllsr; /* 0xe0000 - POR PLL ratio status register */ + uint porbmsr; /* 0xe0004 - POR boot mode status register */ +#define MPC86xx_PORBMSR_HA 0x00060000 + uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */ + uint pordevsr; /* 0xe000c - POR I/O device status regsiter */ +#define MPC86xx_PORDEVSR_IO_SEL 0x000F0000 + uint pordbgmsr; /* 0xe0010 - POR debug mode status register */ + char res1[12]; + uint gpporcr; /* 0xe0020 - General-purpose POR configuration register */ + char res2[12]; + uint gpiocr; /* 0xe0030 - GPIO control register */ + char res3[12]; + uint gpoutdr; /* 0xe0040 - General-purpose output data register */ + char res4[12]; + uint gpindr; /* 0xe0050 - General-purpose input data register */ + char res5[12]; + uint pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */ + char res6[12]; + uint devdisr; /* 0xe0070 - Device disable control */ +#define MPC86xx_DEVDISR_PCIEX1 0x80000000 +#define MPC86xx_DEVDISR_PCIEX2 0x40000000 + char res7[12]; + uint powmgtcsr; /* 0xe0080 - Power management status and control register */ + char res8[12]; + uint mcpsumr; /* 0xe0090 - Machine check summary register */ + char res9[12]; + uint pvr; /* 0xe00a0 - Processor version register */ + uint svr; /* 0xe00a4 - System version register */ + char res10[3416]; + uint clkocr; /* 0xe0e00 - Clock out select register */ + char res11[12]; + uint ddrdllcr; /* 0xe0e10 - DDR DLL control register */ + char res12[12]; + uint lbcdllcr; /* 0xe0e20 - LBC DLL control register */ + int res13[57]; + uint lynxdcr1; /* 0xe0f08 - Lynx debug control register 1*/ + int res14[6]; + uint ddrioovcr; /* 0xe0f24 - DDR IO Overdrive Control register */ + char res15[61656]; +} ccsr_gur_t; + +typedef struct immap { + ccsr_local_mcm_t im_local_mcm; + ccsr_ddr_t im_ddr1; + ccsr_i2c_t im_i2c; + ccsr_duart_t im_duart; + ccsr_lbc_t im_lbc; + ccsr_ddr_t im_ddr2; + char res1[4096]; + ccsr_pex_t im_pex1; + ccsr_pex_t im_pex2; + ccsr_ht_t im_ht; + char res2[90112]; + ccsr_dma_t im_dma; + char res3[8192]; + ccsr_tsec_t im_tsec1; + ccsr_tsec_t im_tsec2; + ccsr_tsec_t im_tsec3; + ccsr_tsec_t im_tsec4; + char res4[98304]; + ccsr_pic_t im_pic; + char res5[389120]; + ccsr_rio_t im_rio; + ccsr_gur_t im_gur; +} immap_t; + +extern immap_t *immr; + +#endif /*__IMMAP_86xx__*/ diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h index baaf6f7..914f28b 100644 --- a/include/asm-ppc/mmu.h +++ b/include/asm-ppc/mmu.h @@ -117,8 +117,8 @@ typedef struct _P601_BAT { */ typedef struct _pte { - unsigned long page_num:20; - unsigned long flags:12; /* Page flags (some unused bits) */ + unsigned long page_num:20; + unsigned long flags:12; /* Page flags (some unused bits) */ } pte; #define PD_SHIFT (10+12) /* Page directory */ @@ -434,9 +434,14 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower); #define BOOKE_PAGESZ_1GB 10 #define BOOKE_PAGESZ_4GB 11 +#if defined(CONFIG_MPC86xx) +#define LAWBAR_BASE_ADDR 0x00FFFFFF +#define LAWAR_TRGT_IF 0x01F00000 +#else #define LAWBAR_BASE_ADDR 0x000FFFFF -#define LAWAR_EN 0x80000000 #define LAWAR_TRGT_IF 0x00F00000 +#endif +#define LAWAR_EN 0x80000000 #define LAWAR_SIZE 0x0000003F #define LAWAR_TRGT_IF_PCI 0x00000000 @@ -445,8 +450,11 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower); #define LAWAR_TRGT_IF_PCI2 0x00100000 #define LAWAR_TRGT_IF_LBC 0x00400000 #define LAWAR_TRGT_IF_CCSR 0x00800000 +#define LAWAR_TRGT_IF_DDR_INTERLEAVED 0x00B00000 #define LAWAR_TRGT_IF_RIO 0x00c00000 #define LAWAR_TRGT_IF_DDR 0x00f00000 +#define LAWAR_TRGT_IF_DDR1 0x00f00000 +#define LAWAR_TRGT_IF_DDR2 0x01600000 #define LAWAR_SIZE_BASE 0xa #define LAWAR_SIZE_4K (LAWAR_SIZE_BASE+1) @@ -469,6 +477,10 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower); #define LAWAR_SIZE_512M (LAWAR_SIZE_BASE+18) #define LAWAR_SIZE_1G (LAWAR_SIZE_BASE+19) #define LAWAR_SIZE_2G (LAWAR_SIZE_BASE+20) +#define LAWAR_SIZE_4G (LAWAR_SIZE_BASE+21) +#define LAWAR_SIZE_8G (LAWAR_SIZE_BASE+22) +#define LAWAR_SIZE_16G (LAWAR_SIZE_BASE+23) +#define LAWAR_SIZE_32G (LAWAR_SIZE_BASE+24) #ifdef CONFIG_440SPE /*----------------------------------------------------------------------------+ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 44b23f1..388dea4 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -264,6 +264,7 @@ #define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ #define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ #define SPRN_IMMR 0x27E /* Internal Memory Map Register */ +#define SPRN_LDSTCR 0x3F8 /* Load/Store Control Register */ #define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ #define SPRN_LR 0x008 /* Link Register */ #define SPRN_MBAR 0x137 /* System memory base address */ @@ -443,6 +444,11 @@ #define SPRN_MCSR 0x23c /* Machine Check Syndrome register */ #define ESR_ST 0x00800000 /* Store Operation */ +#if defined(CONFIG_MPC86xx) +#define SPRN_MSSCRO 0x3f6 +#endif + + /* Short-hand versions for a number of the above SPRNs */ #define CTR SPRN_CTR /* Counter Register */ @@ -501,10 +507,14 @@ #define ICMP SPRN_ICMP /* Instruction TLB Compare Register */ #define IMISS SPRN_IMISS /* Instruction TLB Miss Register */ #define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */ +#define LDSTCR SPRN_LDSTCR /* Load/Store Control Register */ #define L2CR SPRN_L2CR /* PPC 750 L2 control register */ #define LR SPRN_LR #define MBAR SPRN_MBAR /* System memory base address */ -#if defined(CONFIG_E500) +#if defined(CONFIG_MPC86xx) +#define MSSCR0 SPRN_MSSCRO +#endif +#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx) #define PIR SPRN_PIR #endif #define SVR SPRN_SVR /* System-On-Chip Version Register */ @@ -538,7 +548,7 @@ #define CSRR0 SPRN_CSRR0 #define CSRR1 SPRN_CSRR1 #define IVPR SPRN_IVPR -#define USPRG0 SPRN_USPRG0 +#define USPRG0 SPRN_USPRG #define SPRG4R SPRN_SPRG4R #define SPRG5R SPRN_SPRG5R #define SPRG6R SPRN_SPRG6R @@ -728,6 +738,10 @@ #define PVR_440EP_RC 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */ #define PVR_440GR_RA 0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */ #define PVR_440GR_RB 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */ +#define PVR_440EPX1_RA 0x216218D0 /* 440EPX rev A with Security / Kasumi */ +#define PVR_440EPX2_RA 0x216218D4 /* 440EPX rev A without Security / Kasumi */ +#define PVR_440GRX1_RA 0x216218D8 /* 440GRX rev A with Security / Kasumi */ +#define PVR_440GRX2_RA 0x216218DC /* 440GRX rev A without Security / Kasumi */ #define PVR_440GX_RA 0x51B21850 #define PVR_440GX_RB 0x51B21851 #define PVR_440GX_RC 0x51B21892 @@ -759,6 +773,8 @@ #define PVR_85xx_REV1 (PVR_85xx | 0x0010) #define PVR_85xx_REV2 (PVR_85xx | 0x0020) +#define PVR_86xx 0x80040000 +#define PVR_86xx_REV1 (PVR_86xx | 0x0010) /* * For the 8xx processors, all of them report the same PVR family for @@ -794,6 +810,8 @@ #define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */ #define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revison field */ +#define SVR_SUBVER(svr) (((svr) >> 8) & 0xFF) /* Process/MFG sub-version */ + #define SVR_FAM(svr) (((svr) >> 20) & 0xFFF) /* Family field */ #define SVR_MEM(svr) (((svr) >> 16) & 0xF) /* Member field */ @@ -811,6 +829,7 @@ #define SVR_8541 0x807A #define SVR_8548 0x8031 #define SVR_8548_E 0x8039 +#define SVR_8641 0x8090 /* I am just adding a single entry for 8260 boards. I think we may be diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h index f7aa55f..30b44e3 100644 --- a/include/asm-ppc/u-boot.h +++ b/include/asm-ppc/u-boot.h @@ -45,7 +45,7 @@ typedef struct bd_info { unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ #if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \ - || defined(CONFIG_E500) + || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) unsigned long bi_immr_base; /* base of IMMR register */ #endif #if defined(CONFIG_MPC5xxx) @@ -108,7 +108,8 @@ typedef struct bd_info { #endif #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \ - defined(CONFIG_440EP) || defined(CONFIG_440GR) + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) unsigned int bi_opbfreq; /* OPB clock in Hz */ int bi_iic_fast[2]; /* Use fast i2c mode */ #endif diff --git a/include/common.h b/include/common.h index e4637ad..ac78d1c 100644 --- a/include/common.h +++ b/include/common.h @@ -79,6 +79,10 @@ typedef volatile unsigned char vu_char; #endif #include <asm/immap_8260.h> #endif +#ifdef CONFIG_MPC86xx +#include <mpc86xx.h> +#include <asm/immap_86xx.h> +#endif #ifdef CONFIG_MPC85xx #include <mpc85xx.h> #include <asm/immap_85xx.h> @@ -109,6 +113,12 @@ typedef volatile unsigned char vu_char; #define debugX(level,fmt,args...) #endif /* DEBUG */ +#define BUG() do { \ + printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \ + panic("BUG!"); \ +} while (0) +#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0) + typedef void (interrupt_handler_t)(void *); #include <asm/u-boot.h> /* boot information for Linux kernel */ @@ -194,6 +204,9 @@ int checkdram (void); char * strmhz(char *buf, long hz); int last_stage_init(void); extern ulong monitor_flash_len; +#ifdef CFG_ID_EEPROM +int mac_read_from_eeprom(void); +#endif /* common/flash.c */ void flash_perror (int); @@ -245,6 +258,9 @@ void pciinfo (int, int); void pci_master_init (struct pci_controller *); # endif int is_pci_host (struct pci_controller *); +#if defined(CONFIG_440SPE) + void pcie_setup_hoses(void); +#endif #endif int misc_init_f (void); @@ -254,7 +270,7 @@ int misc_init_r (void); void jumptable_init(void); /* common/memsize.c */ -int get_ram_size (volatile long *, long); +long get_ram_size (volatile long *, long); /* $(BOARD)/$(BOARD).c */ void reset_phy (void); @@ -304,7 +320,8 @@ void board_ether_init (void); #if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_MBX) || \ defined(CONFIG_IAD210) || defined(CONFIG_XPEDITE1K) || \ - defined(CONFIG_METROBOX) || defined(CONFIG_KAREF) + defined(CONFIG_METROBOX) || defined(CONFIG_KAREF) || \ + defined(CONFIG_V38B) void board_get_enetaddr (uchar *addr); #endif @@ -367,6 +384,7 @@ void trap_init (ulong); defined (CONFIG_74xx) || \ defined (CONFIG_MPC8220) || \ defined (CONFIG_MPC85xx) || \ + defined (CONFIG_MPC86xx) || \ defined (CONFIG_MPC83XX) unsigned char in8(unsigned int); void out8(unsigned int, unsigned char); @@ -455,6 +473,10 @@ ulong get_bus_freq (ulong); typedef MPC85xx_SYS_INFO sys_info_t; void get_sys_info ( sys_info_t * ); #endif +#if defined(CONFIG_MPC86xx) +typedef MPC86xx_SYS_INFO sys_info_t; +void get_sys_info ( sys_info_t * ); +#endif #if defined(CONFIG_4xx) || defined(CONFIG_IOP480) # if defined(CONFIG_440) @@ -462,6 +484,7 @@ void get_sys_info ( sys_info_t * ); # if defined(CONFIG_440SPE) unsigned long determine_sysper(void); unsigned long determine_pci_clock_per(void); + int ppc440spe_revB(void); # endif # else typedef PPC405_SYS_INFO sys_info_t; @@ -473,7 +496,7 @@ void get_sys_info ( sys_info_t * ); #if defined(CONFIG_8xx) || defined(CONFIG_8260) void cpu_init_f (volatile immap_t *immr); #endif -#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) +#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx) void cpu_init_f (void); #endif @@ -599,7 +622,7 @@ void show_boot_progress (int status); #endif #ifdef CONFIG_INIT_CRITICAL -#error CONFIG_INIT_CRITICAL is depracted! +#error CONFIG_INIT_CRITICAL is deprecated! #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. #endif diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h index a5bc773..90d3a8d 100644 --- a/include/configs/CPCI440.h +++ b/include/configs/CPCI440.h @@ -31,7 +31,8 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_EBONY 1 /* Board is ebony */ +#define CONFIG_CPCI440 1 /* Board is ebony */ +#define CONFIG_440GP 1 /* Specifc GP support */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index 244e45a..bc23fc0 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -74,7 +74,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " -#define CFG_AUTO_COMPLETE 1 +#define CONFIG_AUTO_COMPLETE 1 /* Define which ETH port will be used for connecting the network */ #define CFG_ETH_PORT ETH_0 diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index 7a1dada..ce969ec 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -527,7 +527,7 @@ PSDMR_LDOTOPRE_1C |\ PSDMR_WRC_1C |\ PSDMR_CL_2) - + /* * Init Memory Controller: * diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 7bbceb0..2ad6f06 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -200,7 +200,6 @@ /* Include auto complete with tabs */ #define CONFIG_AUTO_COMPLETE 1 -#define CFG_AUTO_COMPLETE 1 #define CFG_ALT_MEMTEST 1 /* use real memory test */ diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index b965571..465a4ec 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -268,7 +268,7 @@ /* Include auto complete with tabs */ #define CONFIG_AUTO_COMPLETE 1 -#define CFG_AUTO_COMPLETE 1 +#define CONFIG_AUTO_COMPLETE 1 #define CFG_ALT_MEMTEST 1 /* use real memory test */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 131c832..74a84f4 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -68,6 +68,10 @@ * The board, however, can run at 66MHz. In any event, this value * must match the settings of some switches. Details can be found * in the README.mpc85xxads. + * + * XXX -- Can't we run at 66 MHz, anyway? PCI should drop to + * 33MHz to accommodate, based on a PCI pin. + * Note that PCI-X won't work at 33MHz. */ #ifndef CONFIG_SYS_CLK_FREQ @@ -293,12 +297,31 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8540@0" +#define OF_SOC "soc8540@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 8) +#define OF_STDOUT_PATH "/soc8540@e0000000/serial@4500" + +#define CFG_64BIT_VSPRINTF 1 +#define CFG_64BIT_STRTOUL 1 + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* RapidIO MMU */ #define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ @@ -312,9 +335,10 @@ #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PCI1_IO_BASE 0xe2000000 -#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ + +#define CFG_PCI1_IO_BASE 0x0 +#define CFG_PCI1_IO_PHYS 0xe2000000 +#define CFG_PCI1_IO_SIZE 0x100000 /* 1M */ #if defined(CONFIG_PCI) @@ -497,8 +521,10 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ - "ramdiskaddr=400000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" + "ramdiskaddr=600000\0" \ + "ramdiskfile=your.ramdisk.u-boot\0" \ + "fdtaddr=400000\0" \ + "fdtfile=your.fdt.dtb\0" #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ @@ -506,13 +532,15 @@ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr $ramdiskaddr" #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 1af9231..418a3a3 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -179,12 +179,16 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* General PCI */ #define CFG_PCI_MEM_BASE 0x80000000 diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index c96b98b..db389cf 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -308,13 +308,29 @@ extern unsigned long get_clock_freq(void); #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8541@0" +#define OF_SOC "soc8541@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 8) +#define OF_STDOUT_PATH "/soc8541@e0000000/serial@4600" + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_EEPROM_ADDR 0x57 #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* * General PCI @@ -323,32 +339,27 @@ extern unsigned long get_clock_freq(void); #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PCI1_IO_BASE 0xe2000000 -#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xe2000000 +#define CFG_PCI1_IO_SIZE 0x100000 /* 1M */ #define CFG_PCI2_MEM_BASE 0xa0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE #define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PCI2_IO_BASE 0xe3000000 -#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE -#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI2_IO_BASE 0x00000000 +#define CFG_PCI2_IO_PHYS 0xe2100000 +#define CFG_PCI2_IO_SIZE 0x100000 /* 1M */ #if defined(CONFIG_PCI) +#define CONFIG_MPC85XX_PCI2 #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ #undef CONFIG_EEPRO100 #undef CONFIG_TULIP -#if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xe0000000 - #define PCI_ENET0_MEMADDR 0xe0000000 - #define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/ -#endif - #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ @@ -482,8 +493,10 @@ extern unsigned long get_clock_freq(void); #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS1\0" \ - "ramdiskaddr=400000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" + "ramdiskaddr=600000\0" \ + "ramdiskfile=your.ramdisk.u-boot\0" \ + "fdtaddr=400000\0" \ + "fdtfile=your.fdt.dtb\0" #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ @@ -491,7 +504,8 @@ extern unsigned long get_clock_freq(void); "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 4ca8bc3..7c4849f 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -314,13 +314,29 @@ extern unsigned long get_clock_freq(void); #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8548@0" +#define OF_SOC "soc8548@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 8) +#define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600" + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_EEPROM_ADDR 0x57 #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* * General PCI @@ -329,32 +345,27 @@ extern unsigned long get_clock_freq(void); #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PCI1_IO_BASE 0xe2000000 -#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xe2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ #define CFG_PCI2_MEM_BASE 0xa0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE #define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PCI2_IO_BASE 0xe3000000 -#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE -#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI2_IO_BASE 0x00000000 +#define CFG_PCI2_IO_PHYS 0xe2100000 +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ #if defined(CONFIG_PCI) #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_85XX_PCI2 #undef CONFIG_EEPRO100 #undef CONFIG_TULIP -#if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xe0000000 - #define PCI_ENET0_MEMADDR 0xe0000000 - #define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/ -#endif - #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ @@ -374,7 +385,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_MPC85XX_TSEC2_NAME "eTSEC1" #define CONFIG_MPC85XX_TSEC3 1 #define CONFIG_MPC85XX_TSEC3_NAME "eTSEC2" -#define CONFIG_MPC85XX_TSEC4 1 +#undef CONFIG_MPC85XX_TSEC4 #define CONFIG_MPC85XX_TSEC4_NAME "eTSEC3" #undef CONFIG_MPC85XX_FEC @@ -382,13 +393,11 @@ extern unsigned long get_clock_freq(void); #define TSEC2_PHY_ADDR 1 #define TSEC3_PHY_ADDR 2 #define TSEC4_PHY_ADDR 3 -#define FEC_PHY_ADDR 3 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 -#define FEC_PHYIDX 0 /* Options are: eTSEC[0-3] */ #define CONFIG_ETHPRIME "eTSEC0" @@ -476,6 +485,8 @@ extern unsigned long get_clock_freq(void); #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD +#define CONFIG_HAS_ETH3 +#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253 @@ -498,8 +509,11 @@ extern unsigned long get_clock_freq(void); #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS1\0" \ - "ramdiskaddr=400000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" + "ramdiskaddr=600000\0" \ + "ramdiskfile=your.ramdisk.u-boot\0" \ + "fdtaddr=400000\0" \ + "fdtfile=your.fdt.dtb\0" + #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ @@ -507,7 +521,9 @@ extern unsigned long get_clock_freq(void); "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index a44e3ec..4c8b4e7 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -308,13 +308,29 @@ extern unsigned long get_clock_freq(void); #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8555@0" +#define OF_SOC "soc8555@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 8) +#define OF_STDOUT_PATH "/soc8555@e0000000/serial@4600" + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_EEPROM_ADDR 0x57 #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* * General PCI @@ -323,33 +339,28 @@ extern unsigned long get_clock_freq(void); #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PCI1_IO_BASE 0xe2000000 -#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xe2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ #define CFG_PCI2_MEM_BASE 0xa0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE #define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PCI2_IO_BASE 0xe3000000 -#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE -#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI2_IO_BASE 0x00000000 +#define CFG_PCI2_IO_PHYS 0xe2100000 +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ #if defined(CONFIG_PCI) #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_MPC85XX_PCI2 #undef CONFIG_EEPRO100 #undef CONFIG_TULIP -#if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xe0000000 - #define PCI_ENET0_MEMADDR 0xe0000000 - #define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/ -#endif - -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ #endif /* CONFIG_PCI */ @@ -482,8 +493,10 @@ extern unsigned long get_clock_freq(void); #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS1\0" \ - "ramdiskaddr=400000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" + "ramdiskaddr=600000\0" \ + "ramdiskfile=your.ramdisk.u-boot\0" \ + "fdtaddr=400000\0" \ + "fdtfile=your.fdt.dtb\0" #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ @@ -491,7 +504,8 @@ extern unsigned long get_clock_freq(void); "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 2d5031b..835bf5c 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -290,12 +290,28 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8560@0" +#define OF_SOC "soc8560@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 8) +#define OF_STDOUT_PATH "/soc8560@e0000000/serial@4500" + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* RapidIO MMU */ #define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h new file mode 100644 index 0000000..246ac7f --- /dev/null +++ b/include/configs/MPC8641HPCN.h @@ -0,0 +1,634 @@ +/* + * Copyright 2006 Freescale Semiconductor. + * + * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * MPC8641HPCN board configuration file + * + * Make sure you change the MAC address and other network params first, + * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_MPC86xx 1 /* MPC86xx */ +#define CONFIG_MPC8641 1 /* MPC8641 specific */ +#define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */ +#define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */ +#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ +#undef DEBUG + +#ifdef RUN_DIAG +#define CFG_DIAG_ADDR 0xff800000 +#endif + +#define CFG_RESET_ADDRESS 0xfff00100 + +/*#undef CONFIG_PCI*/ +#define CONFIG_PCI + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ +#undef CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ +#define CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#define CONFIG_NUM_DDR_CONTROLLERS 2 +/* #define CONFIG_DDR_INTERLEAVE 1 */ +#define CACHE_LINE_INTERLEAVING 0x20000000 +#define PAGE_INTERLEAVING 0x21000000 +#define BANK_INTERLEAVING 0x22000000 +#define SUPER_BANK_INTERLEAVING 0x23000000 + + +#define CONFIG_ALTIVEC 1 + +/* + * L2CR setup -- make sure this is right for your board! + */ +#define CFG_L2 +#define L2_INIT 0 +#define L2_ENABLE (L2CR_L2E) + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) +#endif + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ +#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ + +/* + * DDR Setup + */ +#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CONFIG_VERY_BIG_RAM + +#define MPC86xx_DDR_SDRAM_CLK_CNTL + +#if defined(CONFIG_SPD_EEPROM) + /* + * Determine DDR configuration from I2C interface. + */ + #define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */ + +#else + /* + * Manually set up DDR1 parameters + */ + + #define CFG_SDRAM_SIZE 256 /* DDR is 256MB */ + + #define CFG_DDR_CS0_BNDS 0x0000000F + #define CFG_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ + #define CFG_DDR_EXT_REFRESH 0x00000000 + #define CFG_DDR_TIMING_0 0x00260802 + #define CFG_DDR_TIMING_1 0x39357322 + #define CFG_DDR_TIMING_2 0x14904cc8 + #define CFG_DDR_MODE_1 0x00480432 + #define CFG_DDR_MODE_2 0x00000000 + #define CFG_DDR_INTERVAL 0x06090100 + #define CFG_DDR_DATA_INIT 0xdeadbeef + #define CFG_DDR_CLK_CTRL 0x03800000 + #define CFG_DDR_OCD_CTRL 0x00000000 + #define CFG_DDR_OCD_STATUS 0x00000000 + #define CFG_DDR_CONTROL 0xe3008000 /* Type = DDR2 */ + #define CFG_DDR_CONTROL2 0x04400000 + + /* Not used in fixed_sdram function */ + + #define CFG_DDR_MODE 0x00000022 + #define CFG_DDR_CS1_BNDS 0x00000000 + #define CFG_DDR_CS2_BNDS 0x00000FFF /* Not done */ + #define CFG_DDR_CS3_BNDS 0x00000FFF /* Not done */ + #define CFG_DDR_CS4_BNDS 0x00000FFF /* Not done */ + #define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */ +#endif + +#define CFG_ID_EEPROM 1 +#define ID_EEPROM_ADDR 0x57 + +/* + * In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000. + * There is an 8MB flash. In effect, the addresses from fe000000 to fe7fffff + * map to fe800000 to ffffffff, and ff000000 to ff7fffff map to ffffffff. + * However, when u-boot comes up, the flash_init needs hard start addresses + * to build its info table. For user convenience, the flash addresses is + * fe800000 and ff800000. That way, u-boot knows where the flash is + * and the user can download u-boot code from promjet to fef00000, a + * more intuitive location than fe700000. + * + * Note that, on switching the boot location, fef00000 becomes fff00000. + */ +#define CFG_FLASH_BASE 0xfe800000 /* start of FLASH 32M */ +#define CFG_FLASH_BASE2 0xff800000 + +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2} + +#define CFG_BR0_PRELIM 0xff001001 /* port size 16bit */ +#define CFG_OR0_PRELIM 0xff006ff7 /* 16MB Boot Flash area*/ + +#define CFG_BR1_PRELIM 0xfe001001 /* port size 16bit */ +#define CFG_OR1_PRELIM 0xff006ff7 /* 16MB Alternate Boot Flash area*/ + +#define CFG_BR2_PRELIM 0xf8201001 /* port size 16bit */ +#define CFG_OR2_PRELIM 0xfff06ff7 /* 1MB Compact Flash area*/ + +#define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */ +#define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ + + +#define PIXIS_BASE 0xf8100000 /* PIXIS registers */ +#define PIXIS_ID 0x0 /* Board ID at offset 0 */ +#define PIXIS_VER 0x1 /* Board version at offset 1 */ +#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ +#define PIXIS_RST 0x4 /* PIXIS Reset Control register */ +#define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch register */ +#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ +#define PIXIS_VCTL 0x10 /* VELA Control Register */ +#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ +#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ +#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ +#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ +#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ +#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ +#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ + +#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ +#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_FLASH_EMPTY_INFO + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#if defined(CFG_RAMBOOT) +#undef CFG_FLASH_CFI_DRIVER +#undef CONFIG_SPD_EEPROM +#define CFG_SDRAM_SIZE 256 +#endif + +#undef CONFIG_CLOCKS_IN_MHZ + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#ifndef CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ +#else +#define CFG_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ +#endif +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* + * Pass open firmware flat tree to kernel + */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8641@0" +#define OF_SOC "soc8641@f8000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8641@f8000000/serial@4500" + +#define CFG_64BIT_VSPRINTF 1 +#define CFG_64BIT_STRTOUL 1 + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3100 + +/* + * RapidIO MMU + */ +#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ +#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE +#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI1_IO_BASE 0xe2000000 +#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE +#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ + +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 + +/* For RTL8139 */ +#define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);}) +#define _IO_BASE 0x00000000 + +#define CFG_PCI2_MEM_BASE 0xa0000000 +#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_IO_BASE 0xe3000000 +#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE +#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ + +#if defined(CONFIG_PCI) + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#undef CFG_SCSI_SCAN_BUS_REVERSE + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#define CONFIG_RTL8139 + +#undef CONFIG_EEPRO100 +#undef CONFIG_TULIP + +#if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xe0000000 + #define PCI_ENET0_MEMADDR 0xe0000000 + #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ +#endif + +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#define CONFIG_DOS_PARTITION +#define CONFIG_SCSI_AHCI + +#ifdef CONFIG_SCSI_AHCI +#define CONFIG_SATA_ULI5288 +#define CFG_SCSI_MAX_SCSI_ID 4 +#define CFG_SCSI_MAX_LUN 1 +#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) +#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE +#endif + +#endif /* CONFIG_PCI */ + +#if defined(CONFIG_TSEC_ENET) + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +#define CONFIG_MII 1 /* MII PHY management */ + +#define CONFIG_MPC86XX_TSEC1 1 +#define CONFIG_MPC86XX_TSEC1_NAME "eTSEC1" +#define CONFIG_MPC86XX_TSEC2 1 +#define CONFIG_MPC86XX_TSEC2_NAME "eTSEC2" +#define CONFIG_MPC86XX_TSEC3 1 +#define CONFIG_MPC86XX_TSEC3_NAME "eTSEC3" +#define CONFIG_MPC86XX_TSEC4 1 +#define CONFIG_MPC86XX_TSEC4_NAME "eTSEC4" + +#define TSEC1_PHY_ADDR 0 +#define TSEC2_PHY_ADDR 1 +#define TSEC3_PHY_ADDR 2 +#define TSEC4_PHY_ADDR 3 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 +#define TSEC4_PHYIDX 0 + +#define CONFIG_ETHPRIME "eTSEC1" + +#endif /* CONFIG_TSEC_ENET */ + +/* + * BAT0 2G Cacheable, non-guarded + * 0x0000_0000 2G DDR + */ +#define CFG_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) +#define CFG_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) +#define CFG_IBAT0U CFG_DBAT0U + +/* + * BAT1 1G Cache-inhibited, guarded + * 0x8000_0000 512M PCI-Express 1 Memory + * 0xa000_0000 512M PCI-Express 2 Memory + * Changed it for operating from 0xd0000000 + */ +#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT1U CFG_DBAT1U + +/* + * BAT2 512M Cache-inhibited, guarded + * 0xc000_0000 512M RapidIO Memory + */ +#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT2U CFG_DBAT2U + +/* + * BAT3 4M Cache-inhibited, guarded + * 0xf800_0000 4M CCSR + */ +#define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT3U CFG_DBAT3U + +/* + * BAT4 32M Cache-inhibited, guarded + * 0xe200_0000 16M PCI-Express 1 I/O + * 0xe300_0000 16M PCI-Express 2 I/0 + * Note that this is at 0xe0000000 + */ +#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT4U CFG_DBAT4U + +/* + * BAT5 128K Cacheable, non-guarded + * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory) + */ +#define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_DBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_IBAT5L CFG_DBAT5L +#define CFG_IBAT5U CFG_DBAT5U + +/* + * BAT6 32M Cache-inhibited, guarded + * 0xfe00_0000 32M FLASH + */ +#define CFG_DBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT6U ((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_IBAT6U CFG_DBAT6U + +#define CFG_DBAT7L 0x00000000 +#define CFG_DBAT7U 0x00000000 +#define CFG_IBAT7L 0x00000000 +#define CFG_IBAT7U 0x00000000 + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) + #if defined(CONFIG_PCI) + #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_PCI \ + | CFG_CMD_I2C \ + | CFG_CMD_SCSI \ + | CFG_CMD_EXT2) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_IMLS \ + | CFG_CMD_FLASH \ + | CFG_CMD_LOADS)) + #else + #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_I2C \ + | CFG_CMD_SCSI \ + | CGF_CMD_EXT2) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_IMLS \ + | CFG_CMD_FLASH \ + | CFG_CMD_LOADS)) + #endif +#else + #if defined(CONFIG_PCI) + #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PCI \ + | CFG_CMD_PING \ + | CFG_CMD_I2C \ + | CFG_CMD_SCSI \ + | CFG_CMD_EXT2) + #else + #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_I2C) + #endif +#endif + +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +/* The mac addresses for all ethernet interface */ +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_ETHADDR 00:E0:0C:00:00:01 +#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD +#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD +#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD +#endif + +#define CONFIG_HAS_ETH1 1 +#define CONFIG_HAS_ETH2 1 +#define CONFIG_HAS_ETH3 1 + +#define CONFIG_IPADDR 192.168.1.100 + +#define CONFIG_HOSTNAME unknown +#define CONFIG_ROOTPATH /opt/nfsroot +#define CONFIG_BOOTFILE uImage + +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.255.0 + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=your.ramdisk.u-boot\0" \ + "dtbaddr=400000\0" \ + "dtbfile=mpc8641_hpcn.dtb\0" \ + "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ + "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ + "maxcpus=2" + + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr $ramdiskaddr $dtbaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/PM854.h b/include/configs/PM854.h index da01186..4fb5440 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -193,12 +193,16 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* * EEPROM configuration diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 4d83487..87ab934 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -190,12 +190,16 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* * EEPROM configuration diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 0451b20..f8e3397 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -214,12 +214,16 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 #define CFG_PCI_MEM_BASE 0xC0000000 #define CFG_PCI_MEM_PHYS 0xC0000000 diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index be83b67..08674ca 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -37,7 +37,8 @@ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ -#ifndef CONFIG_CAM5200 /* On a Cameron board or ... */ +/* On a Cameron or on a FO300 board or ... */ +#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300) #define CONFIG_STK52XX 1 /* ... on a STK52XX board */ #endif @@ -58,6 +59,20 @@ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#ifdef CONFIG_FO300 +#define CFG_DEVICE_NULLDEV 1 /* enable null device */ +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* used to detect S1 switch position */ +#define CONFIG_USB_BIN_FIXUP 1 /* for a buggy USB device */ +#if 0 +#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */ + /* switch is closed */ +#endif + +#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* silent console on PSC1 when S1 */ + /* switch is open */ +#endif /* CONFIG_FO300 */ + #ifdef CONFIG_STK52XX #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ #define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ @@ -105,12 +120,18 @@ #define CONFIG_VIDEO_SM501_32BPP #define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_LOGO -#define CONFIG_VGA_AS_SINGLE_DEVICE + +#ifndef CONFIG_FO300 #define CONFIG_CONSOLE_EXTRA_INFO +#else +#define CONFIG_VIDEO_BMP_LOGO +#endif + +#define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN #define CFG_CONSOLE_IS_IN_ENV -#endif +#endif /* #ifndef CONFIG_TQM5200S */ #ifdef CONFIG_VIDEO #define ADD_BMP_CMD CFG_CMD_BMP @@ -124,7 +145,7 @@ #define CONFIG_ISO_PARTITION /* USB */ -#ifdef CONFIG_STK52XX +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) #define CONFIG_USB_OHCI #define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE @@ -148,7 +169,7 @@ #endif /* IDE */ -#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) +#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300) #define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) #else #define ADD_IDE_CMD 0 @@ -196,37 +217,19 @@ #undef CONFIG_BOOTARGS -#ifdef CONFIG_STK52XX -# if defined(CONFIG_TQM5200_B) -# if defined(CFG_LOWBOOT) -# define ENV_UPDT \ - "update=protect off FC000000 FC07FFFF;" \ - "erase FC000000 FC07FFFF;" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC07FFFF\0" -# else /* highboot */ -# define ENV_UPDT \ - "update=protect off FFF00000 FFF7FFFF;" \ - "erase FFF00000 FFF7FFFF;" \ +#if defined(CONFIG_TQM5200_B) && !defined(CFG_LOWBOOT) +# define ENV_UPDT \ + "update=protect off FFF00000 +${filesize};" \ + "erase FFF00000 +${filesize};" \ "cp.b 200000 FFF00000 ${filesize};" \ - "protect on FFF00000 FFF7FFFF\0" -# endif /* CFG_LOWBOOT */ -# else /* !CONFIG_TQM5200_B */ -# define ENV_UPDT \ - "update=protect off FC000000 FC05FFFF;" \ - "erase FC000000 FC05FFFF;" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC05FFFF\0" -# endif /* CONFIG_TQM5200_B */ -#elif defined (CONFIG_CAM5200) + "protect on FFF00000 +${filesize}\0" +#else /* default lowboot configuration */ # define ENV_UPDT \ - "update=protect off FC000000 FC03FFFF;" \ - "erase FC000000 FC03FFFF;" \ + "update=protect off FC000000 +${filesize};" \ + "erase FC000000 +${filesize};" \ "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC03FFFF\0" -#else -# error "Unknown Carrier Board" -#endif /* CONFIG_STK52XX */ + "protect on FC000000 +${filesize}\0" +#endif #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ @@ -258,7 +261,7 @@ */ #define CFG_IPBSPEED_133 /* define for 133MHz speed */ -#if defined(CFG_IPBSPEED_133) +#if defined(CFG_IPBSPEED_133) && !defined(CONFIG_CAM5200) /* * PCI Bus clocking configuration * @@ -322,13 +325,29 @@ */ #define CFG_FLASH_BASE 0xFC000000 +#ifndef CONFIG_CAM5200 /* use CFI flash driver */ #define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ #define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ #define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#else /* CONFIG_CAM5200 */ +#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks + (= chip selects) */ +#define CFG_FLASH_WORD_SIZE unsigned int /* main flash device with */ +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_ADDR0 0x555 +#define CFG_FLASH_ADDR1 0x2AA +#define CFG_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */ +#define CFG_MAX_FLASH_SECT 128 +#endif /* ifndef CONFIG_CAM5200 */ + #define CFG_FLASH_EMPTY_INFO #define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ -#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ #define CFG_FLASH_USE_BUFFER_WRITE 1 #if defined (CONFIG_CAM5200) @@ -339,9 +358,6 @@ # define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) #endif -#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks - (= chip selects) */ - /* Dynamic MTD partition support */ #define CONFIG_JFFS2_CMDLINE #define MTDIDS_DEFAULT "nor0=TQM5200-0" @@ -374,8 +390,13 @@ #elif defined (CONFIG_CAM5200) # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \ "1792k(kernel)," \ - "3584k(small-fs)," \ + "5632k(rootfs)," \ + "24m(home)" +#elif defined (CONFIG_FO300) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ "2m(initrd)," \ + "4m(small-fs)," \ "8m(misc)," \ "16m(big-fs)" #else @@ -387,7 +408,7 @@ */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */ -#if defined(CONFIG_TQM5200_B) +#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200) #define CFG_ENV_SECT_SIZE 0x40000 #else #define CFG_ENV_SECT_SIZE 0x20000 @@ -445,28 +466,43 @@ /* * GPIO configuration * - * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1): - * Bit 0 (mask: 0x80000000): 1 + * use CS1: Bit 0 (mask: 0x80000000): + * 1 -> Pin gpio_wkup_6 as second SDRAM chip select (mem_cs1). * use ALT CAN position: Bits 2-3 (mask: 0x30000000): - * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. - * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. - * Use for REV200 STK52XX boards. Do not use with REV100 modules - * (because, there I2C1 is used as I2C bus) - * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 - * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) - * 000 -> All PSC2 pins are GIOPs - * 001 -> CAN1/2 on PSC2 pins - * Use for REV100 STK52xx boards - * use PSC6: - * on STK52xx: - * use as UART. Pins PSC6_0 to PSC6_3 are used. - * Bits 9:11 (mask: 0x00700000): - * 101 -> PSC6 : Extended POST test is not available - * on MINI-FAP and TQM5200_IB: - * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000): - * 000 -> PSC6 could not be used as UART, CODEC or IrDA - * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST - * tests. + * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. + * SPI on PSC3 according to PSC3 setting. Use for CAM5200. + * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. + * Use for REV200 STK52XX boards and FO300 boards. Do not use + * with REV100 modules (because, there I2C1 is used as I2C bus). + * use ATA: Bits 6-7 (mask 0x03000000): + * 00 -> No ATA chip selects, csb_4/5 used as normal chip selects. + * Use for CAM5200 board. + * 01 -> ATA cs0/1 on csb_4/5. Use for the remaining boards. + * use PSC6: Bits 9-11 (mask 0x00700000): + * 000 -> use PSC6_0 to PSC6_3 as GPIO, PSC6 could not be used as + * UART, CODEC or IrDA. + * GPIO on PSC6_3 is used in post_hotkeys_pressed() to + * enable extended POST tests. + * Use for MINI-FAP and TQM5200_IB boards. + * 101 -> use PSC6 as UART. Pins PSC6_0 to PSC6_3 are used. + * Extended POST test is not available. + * Use for STK52xx, FO300 and CAM5200 boards. + * use PCI_DIS: Bit 16 (mask 0x00008000): + * 1 -> disable PCI controller (on CAM5200 board). + * use USB: Bits 18-19 (mask 0x00003000): + * 10 -> two UARTs (on FO300 and CAM5200). + * use PSC3: Bits 20-23 (mask: 0x00000f00): + * 0000 -> All PSC3 pins are GPIOs. + * 1100 -> UART/SPI (on FO300 board). + * 0100 -> UART (on CAM5200 board). + * use PSC2: Bits 25:27 (mask: 0x00000030): + * 000 -> All PSC2 pins are GPIOs. + * 100 -> UART (on CAM5200 board). + * 001 -> CAN1/2 on PSC2 pins. + * Use for REV100 STK52xx boards + * 01x -> Use AC97 (on FO300 board). + * use PSC1: Bits 29-31 (mask: 0x00000007): + * 100 -> UART (on all boards). */ #if defined (CONFIG_MINIFAP) # define CFG_GPS_PORT_CONFIG 0x91000004 @@ -480,6 +516,10 @@ # define CFG_GPS_PORT_CONFIG 0x91500004 # endif # endif +#elif defined (CONFIG_FO300) +# define CFG_GPS_PORT_CONFIG 0x91502c24 +#elif defined (CONFIG_CAM5200) +# define CFG_GPS_PORT_CONFIG 0x8050A444 #else /* TMQ5200 Inbetriebnahme-Board */ # define CFG_GPS_PORT_CONFIG 0x81000004 #endif @@ -502,6 +542,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #define CFG_PROMPT_HUSH_PS2 "> " @@ -574,6 +615,16 @@ #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ +#if defined(CONFIG_CAM5200) +#define CFG_CS4_START 0xB0000000 +#define CFG_CS4_SIZE 0x00010000 +#define CFG_CS4_CFG 0x01019C10 + +#define CFG_CS5_START 0xD0000000 +#define CFG_CS5_SIZE 0x01208000 +#define CFG_CS5_CFG 0x1414BF10 +#endif + #define CFG_RESET_ADDRESS 0xff000000 /*----------------------------------------------------------------------- diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index b1c70f8..247f705 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -123,9 +123,8 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if 0 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 9f958f5..1461b5f 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -112,9 +112,8 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if 0 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index 49c3872..ffd5c0b 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -237,6 +237,13 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index cec7e3e..4bbee97 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -353,6 +353,12 @@ extern int tqm834x_num_flash_banks; #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -422,9 +428,9 @@ extern int tqm834x_num_flash_banks; #define CFG_SICRL SICRL_LDP_A /* i-cache and d-cache disabled */ -#define CFG_HID0_INIT 0x000000000 -#define CFG_HID0_FINAL CFG_HID0_INIT -#define CFG_HID2 0x000000000 +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL CFG_HID0_INIT +#define CFG_HID2 HID2_HBE /* DDR 0 - 512M */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) @@ -437,12 +443,21 @@ extern int tqm834x_num_flash_banks; #define CFG_IBAT2U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) /* PCI */ -#define CFG_IBAT3L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#ifdef CONFIG_PCI +#define CFG_IBAT3L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT3U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_IBAT4L (CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT4L (CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT4U (CFG_PCI1_MEM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP) #define CFG_IBAT5L (CFG_PCI1_IO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CFG_IBAT5U (CFG_PCI1_IO_BASE + 0x10000000 | BATU_BL_16M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_IBAT4L (0) +#define CFG_IBAT4U (0) +#define CFG_IBAT5L (0) +#define CFG_IBAT5U (0) +#endif /* IMMRBAR */ #define CFG_IBAT6L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 16b2ce3..90ecbad 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -104,9 +104,8 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if 0 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index bbc6960..b3f8f8d 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -102,9 +102,8 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if 0 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 198db19..49aaeea 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -107,9 +107,8 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if 0 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index e25a7a2..50df49e 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -141,9 +141,8 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if 0 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 780f274..f45f3a2 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -186,18 +186,23 @@ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -/* Use the HUSH parser */ -#define CFG_HUSH_PARSER +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x48} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 /* I2C RTC */ #define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */ @@ -424,7 +429,7 @@ #define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ #define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ "echo" #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ @@ -449,7 +454,7 @@ "run nfsargs addip addcons;bootm\0" \ "rootpath=/opt/eldk/ppc_85xx\0" \ "kernel_addr=FE000000\0" \ - "ramdisk_addr=FE100000\0" \ + "ramdisk_addr=FE180000\0" \ "load=tftp 100000 /tftpboot/$hostname/u-boot.bin\0" \ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ "cp.b 100000 fffc0000 40000;" \ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 4a1a432..9be5db1 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -110,9 +110,8 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if 0 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 4b754ba..37f6c98 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -108,9 +108,8 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if 0 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 1dc9f74..f03690a 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -110,9 +110,8 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if 0 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 3df060c..4959340 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -110,9 +110,8 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if 0 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 8f9c2c9..148490b 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -151,11 +151,10 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if 0 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_PROMPT_HUSH_PS2 "> " #endif #if (CONFIG_COMMANDS & CFG_CMD_KGDB) diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index ede4e3b..d470ade 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -160,11 +160,10 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if 0 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ #ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_PROMPT_HUSH_PS2 "> " #endif #if (CONFIG_COMMANDS & CFG_CMD_KGDB) diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h new file mode 100644 index 0000000..458ebab --- /dev/null +++ b/include/configs/atstk1002.h @@ -0,0 +1,183 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * Configuration settings for the ATSTK1002 CPU daughterboard + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_AVR32 1 +#define CONFIG_AT32AP 1 +#define CONFIG_AT32AP7000 1 +#define CONFIG_ATSTK1002 1 +#define CONFIG_ATSTK1000 1 + +#define CONFIG_ATSTK1000_EXT_FLASH 1 + +/* + * Timer clock frequency. We're using the CPU-internal COUNT register + * for this, so this is equivalent to the CPU core clock frequency + */ +#define CFG_HZ 1000 + +/* + * Set up the PLL to run at 199.5 MHz, the CPU to run at 1/2 the PLL + * frequency and the peripherals to run at 1/4 the PLL frequency. + */ +#define CONFIG_PLL 1 +#define CFG_POWER_MANAGER 1 +#define CFG_OSC0_HZ 20000000 +#define CFG_PLL0_DIV 1 +#define CFG_PLL0_MUL 7 +#define CFG_PLL0_SUPPRESS_CYCLES 16 +#define CFG_CLKDIV_CPU 0 +#define CFG_CLKDIV_HSB 1 +#define CFG_CLKDIV_PBA 2 +#define CFG_CLKDIV_PBB 1 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CFG_PLL0_OPT 0x04 + +#define CFG_USART1 1 + +#define CFG_CONSOLE_UART_DEV DEVICE_USART1 + +/* User serviceable stuff */ +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "console=ttyUS0 root=/dev/mtdblock1 fbmem=600k" + +#define CONFIG_COMMANDS (CFG_CMD_BDI \ + | CFG_CMD_LOADS \ + | CFG_CMD_LOADB \ + /* | CFG_CMD_IMI */ \ + /* | CFG_CMD_CACHE */ \ + | CFG_CMD_FLASH \ + | CFG_CMD_MEMORY \ + /* | CFG_CMD_NET */ \ + | CFG_CMD_ENV \ + /* | CFG_CMD_IRQ */ \ + | CFG_CMD_BOOTD \ + | CFG_CMD_CONSOLE \ + /* | CFG_CMD_EEPROM */ \ + | CFG_CMD_ASKENV \ + | CFG_CMD_RUN \ + | CFG_CMD_ECHO \ + /* | CFG_CMD_I2C */ \ + | CFG_CMD_REGINFO \ + /* | CFG_CMD_DATE */ \ + /* | CFG_CMD_DHCP */ \ + /* | CFG_CMD_AUTOSCRIPT */ \ + /* | CFG_CMD_MII */ \ + | CFG_CMD_MISC \ + /* | CFG_CMD_SDRAM */ \ + /* | CFG_CMD_DIAG */ \ + /* | CFG_CMD_HWFLOW */ \ + /* | CFG_CMD_SAVES */ \ + /* | CFG_CMD_SPI */ \ + /* | CFG_CMD_PING */ \ + /* | CFG_CMD_MMC */ \ + /* | CFG_CMD_FAT */ \ + /* | CFG_CMD_IMLS */ \ + /* | CFG_CMD_ITEST */ \ + /* | CFG_CMD_EXT2 */ \ + ) + +#include <cmd_confdefs.h> + +#define CONFIG_ATMEL_USART 1 +#define CONFIG_PIO2 1 +#define CFG_NR_PIOS 5 +#define CFG_HSDRAMC 1 + +#define CFG_DCACHE_LINESZ 32 +#define CFG_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +/* External flash on STK1000 */ +#if 0 +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#endif + +#define CFG_FLASH_BASE 0x00000000 +#define CFG_FLASH_SIZE 0x800000 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 135 + +#define CFG_MONITOR_BASE CFG_FLASH_BASE + +#define CFG_INTRAM_BASE 0x24000000 +#define CFG_INTRAM_SIZE 0x8000 + +#define CFG_SDRAM_BASE 0x10000000 + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 65536 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE) + +#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) + +#define CFG_MALLOC_LEN (256*1024) +#define CFG_MALLOC_END \ + ({ \ + DECLARE_GLOBAL_DATA_PTR; \ + CFG_SDRAM_BASE + gd->sdram_size; \ + }) +#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN) + +#define CFG_DMA_ALLOC_LEN (16384) +#define CFG_DMA_ALLOC_END (CFG_MALLOC_START) +#define CFG_DMA_ALLOC_START (CFG_DMA_ALLOC_END - CFG_DMA_ALLOC_LEN) +/* Allow 2MB for the kernel run-time image */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000) +#define CFG_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CFG_PROMPT "Uboot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 8 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 + +#define CFG_MEMTEST_START \ + ({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; }) +#define CFG_MEMTEST_END \ + ({ \ + DECLARE_GLOBAL_DATA_PTR; \ + gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; \ + }) +#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } + +#endif /* __CONFIG_H */ diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 2c1c319..4961011 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -73,6 +73,7 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in SDRAM) *----------------------------------------------------------------------*/ +#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ @@ -310,11 +311,11 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ - CFG_CMD_EEPROM | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ CFG_CMD_DIAG | \ CFG_CMD_ELF | \ + CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_IRQ | \ CFG_CMD_MII | \ @@ -358,13 +359,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING - -#ifdef CONFIG_CMDLINE_EDITING -#undef CONFIG_AUTO_COMPLETE -#else -#define CONFIG_AUTO_COMPLETE -#endif +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 4a79835..a66cdc3 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -200,8 +200,9 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/ebony.h b/include/configs/ebony.h index a26af69..d8882ea 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -143,7 +143,13 @@ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ @@ -205,6 +211,7 @@ CFG_CMD_DHCP | \ CFG_CMD_DIAG | \ CFG_CMD_ELF | \ + CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_IRQ | \ CFG_CMD_MII | \ @@ -243,8 +250,9 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h new file mode 100644 index 0000000..a77ccef --- /dev/null +++ b/include/configs/ep82xxm.h @@ -0,0 +1,395 @@ +/* + * Copyright (C) 2006 Embedded Planet, LLC. + * + * U-Boot configuration for Embedded Planet EP82xxM boards. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MPC8260 +#define CPU_ID_STR "MPC8270" + +#define CONFIG_EP82XXM /* Embedded Planet EP82xxM H 1.0 board */ + /* 256MB SDRAM / 64MB FLASH */ + +#undef DEBUG + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ + +/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ +#define CONFIG_ENV_OVERWRITE + +/* + * Select serial console configuration + * + * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then + * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 + * for SCC). + */ +#define CONFIG_CONS_ON_SMC /* Console is on SMC */ +#undef CONFIG_CONS_ON_SCC /* It's not on SCC */ +#undef CONFIG_CONS_NONE /* It's not on external UART */ +#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */ + +#define CFG_BCSR 0xFA000000 + +/* + * Select ethernet configuration + * + * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, + * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for + * SCC, 1-3 for FCC) + * + * If CONFIG_ETHER_NONE is defined, then either the ethernet routines + * must be defined elsewhere (as for the console), or CFG_CMD_NET must + * be removed from CONFIG_COMMANDS to remove support for networking. + */ +#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ +#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ +#undef CONFIG_ETHER_NONE /* No external Ethernet */ + +#define CONFIG_NET_MULTI + +#define CONFIG_ETHER_ON_FCC2 +#define CONFIG_ETHER_ON_FCC3 + +#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK) +#define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK16) +#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) +#define CFG_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) + +#define CFG_CPMFCR_RAMTYPE 0 +#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */ + +/* + * GPIO pins used for bit-banged MII communications + */ +#define MDIO_PORT 0 /* Not used - implemented in BCSR */ +#define MDIO_ACTIVE (*(vu_char *)(CFG_BCSR + 8) &= 0xFB) +#define MDIO_TRISTATE (*(vu_char *)(CFG_BCSR + 8) |= 0x04) +#define MDIO_READ (*(vu_char *)(CFG_BCSR + 8) & 1) + +#define MDIO(bit) if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x01; \ + else *(vu_char *)(CFG_BCSR + 8) &= 0xFE + +#define MDC(bit) if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x02; \ + else *(vu_char *)(CFG_BCSR + 8) &= 0xFD + +#define MIIDELAY udelay(1) + + +#ifndef CONFIG_8260_CLKIN +#define CONFIG_8260_CLKIN 66000000 /* in Hz */ +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_DHCP \ + | CFG_CMD_ECHO \ + | CFG_CMD_I2C \ + | CFG_CMD_IMMAP \ + | CFG_CMD_MII \ + | CFG_CMD_PING \ + | CFG_CMD_DATE \ + | CFG_CMD_DTT \ + | CFG_CMD_EEPROM \ + | CFG_CMD_PCI \ + | CFG_CMD_DIAG \ + ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_ETHADDR 00:10:EC:00:88:65 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:10:EC:80:88:65 +#define CONFIG_IPADDR 10.0.0.245 +#define CONFIG_HOSTNAME EP82xxM +#define CONFIG_SERVERIP 10.0.0.26 +#define CONFIG_GATEWAYIP 10.0.0.1 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CFG_ENV_IN_OWN_SECT 1 +#define CONFIG_AUTO_COMPLETE 1 +#define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3 ETHERNET" + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ +#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ +#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ +#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */ +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ +#endif + +#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ +#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "ep82xxm=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +/* + * Define here the location of the environment variables (FLASH or EEPROM). + * Note: DENX encourages to use redundant environment in FLASH. + */ +#if 1 +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#else +#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#endif + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0xFC000000 +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector in flinfo */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#endif /* CFG_ENV_IS_IN_FLASH */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +/* EEPROM Configuration */ +#define CFG_EEPROM_SIZE 0x1000 +#define CFG_I2C_EEPROM_ADDR 0x54 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#ifdef CFG_ENV_IS_IN_EEPROM +#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */ +#define CFG_ENV_OFFSET 0x0 +#endif /* CFG_ENV_IS_IN_EEPROM */ + +/* RTC Configuration */ +#define CONFIG_RTC_M41T11 1 /* uses a M41T81 */ +#define CFG_I2C_RTC_ADDR 0x68 +#define CONFIG_M41T11_BASE_YEAR 1900 + +/* I2C SYSMON (LM75) */ +#define CONFIG_DTT_LM75 1 +#define CONFIG_DTT_SENSORS {0} +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 + +/*----------------------------------------------------------------------- + * NVRAM Configuration + *----------------------------------------------------------------------- + */ +#define CFG_NVRAM_BASE_ADDR 0xFA080000 +#define CFG_NVRAM_SIZE (128*1024)-16 + + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_PCI_BOOTDELAY 0 + +/* PCI Memory map (if different from default map */ +#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */ +#define CFG_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +#define CFG_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \ + PICMR_PREFETCH_EN) + +/* + * These are the windows that allow the CPU to access PCI address space. + * All three PCI master windows, which allow the CPU to access PCI + * prefetch, non prefetch, and IO space (see below), must all fit within + * these windows. + */ + +/* + * Master window that allows the CPU to access PCI Memory (prefetch). + * This window will be setup with the second set of Outbound ATU registers + * in the bridge. + */ + +#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ +#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ +#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL +#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ +#define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN) + +/* + * Master window that allows the CPU to access PCI Memory (non-prefetch). + * This window will be setup with the second set of Outbound ATU registers + * in the bridge. + */ + +#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ +#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ +#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL +#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ +#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) + +/* + * Master window that allows the CPU to access PCI IO space. + * This window will be setup with the first set of Outbound ATU registers + * in the bridge. + */ + +#define CFG_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */ +#define CFG_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ +#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL +#define CFG_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */ +#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO) + + +/* PCIBR0 - for PCI IO*/ +#define CFG_PCI_MSTR0_LOCAL CFG_PCI_MSTR_IO_LOCAL /* Local base */ +#define CFG_PCIMSK0_MASK ~(CFG_PCI_MSTR_IO_SIZE - 1U) /* Size of window */ +/* PCIBR1 - prefetch and non-prefetch regions joined together */ +#define CFG_PCI_MSTR1_LOCAL CFG_PCI_MSTR_MEM_LOCAL +#define CFG_PCIMSK1_MASK ~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U) + + +#define CFG_DIRECT_FLASH_TFTP + +#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS +#define CFG_JFFS2_FIRST_SECTOR 0 +#define CFG_JFFS2_LAST_SECTOR 62 +#define CFG_JFFS2_SORT_FRAGMENTS +#define CFG_JFFS_CUSTOM_PART +#endif /* CFG_CMD_JFFS2 */ + +#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#define CONFIG_HARD_I2C 1 /* To enable I2C support */ +#define CFG_I2C_SPEED 100000 /* I2C speed */ +#define CFG_I2C_SLAVE 0x7F /* I2C slave address */ +#endif /* CFG_CMD_I2C */ + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#endif + +#define CFG_MONITOR_LEN (512 << 10) /* Reserve 256KB for Monitor */ + +#define CFG_DEFAULT_IMMR 0x00010000 +#define CFG_IMMR 0xF0000000 + +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + + +/* Hard reset configuration word */ +#define CFG_HRCW_MASTER 0 /*0x1C800641*/ /* Not used - provided by CPLD */ +/* No slaves */ +#define CFG_HRCW_SLAVE1 0 +#define CFG_HRCW_SLAVE2 0 +#define CFG_HRCW_SLAVE3 0 +#define CFG_HRCW_SLAVE4 0 +#define CFG_HRCW_SLAVE5 0 +#define CFG_HRCW_SLAVE6 0 +#define CFG_HRCW_SLAVE7 0 + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 + +#define CFG_HID2 0 + +#define CFG_SIUMCR 0x02610000 +#define CFG_SYPCR 0xFFFF0689 +#define CFG_BCR 0x8080E000 +#define CFG_SCCR 0x00000001 + +#define CFG_RMR 0 +#define CFG_TMCNTSC 0x000000C3 +#define CFG_PISCR 0x00000083 +#define CFG_RCCR 0 + +#define CFG_MPTPR 0x0A00 +#define CFG_PSDMR 0xC432246E +#define CFG_PSRT 0x32 + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_BR (CFG_SDRAM_BASE | 0x00000041) +#define CFG_SDRAM_OR 0xF0002900 + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00001801) +#define CFG_OR0_PRELIM 0xFC000882 +#define CFG_BR4_PRELIM (CFG_BCSR | 0x00001001) +#define CFG_OR4_PRELIM 0xFFF00050 + +#define CFG_RESET_ADDRESS 0xFFF00100 + +#endif /* __CONFIG_H */ diff --git a/include/configs/luan.h b/include/configs/luan.h index 0335a00..0350e91 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -145,6 +145,13 @@ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ "echo" @@ -215,6 +222,7 @@ CFG_CMD_DHCP | \ CFG_CMD_DIAG | \ CFG_CMD_ELF | \ + CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_IRQ | \ CFG_CMD_MII | \ @@ -253,6 +261,12 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index ce33b85..0c935bf 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -37,12 +37,12 @@ #define CONFIG_MISC_INIT_R -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* @@ -51,16 +51,36 @@ * To select console on the one of 8 external UARTs, * define CONFIG_QUART_CONSOLE as 1, 2, 3, or 4 for the first Quad UART, * or as 5, 6, 7, or 8 for the second Quad UART. + * COM11, COM12, COM13, COM14 are located on the second Quad UART. * * CONFIG_PSC_CONSOLE must be undefined in this case. */ -/* #define CONFIG_QUART_CONSOLE 1 */ /* console is on UART1 of QUART1 */ +#if !defined(CONFIG_PRS200) +/* MCC200 configuration: */ +#ifdef CONFIG_CONSOLE_COM12 +#define CONFIG_QUART_CONSOLE 6 /* console is on UARTF of QUART2 */ +#else +#define CONFIG_QUART_CONSOLE 8 /* console is on UARTH of QUART2 */ +#endif +#else +/* PRS200 configuration: */ +#undef CONFIG_QUART_CONSOLE +#endif /* CONFIG_PRS200 */ /* * To select console on PSC1, define CONFIG_PSC_CONSOLE as 1 * and undefine CONFIG_QUART_CONSOLE. */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) +#if !defined(CONFIG_PRS200) +/* MCC200 configuration: */ +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_PSC_CONSOLE 1 /* PSC1 may be COM */ +#define CONFIG_PSC_CONSOLE2 2 /* PSC2 is PSoC */ +#else +/* PRS200 configuration: */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#endif +#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) && \ + !defined(CONFIG_SERIAL_MULTI) #error "Select only one console device!" #endif #define CONFIG_BAUDRATE 115200 @@ -72,7 +92,7 @@ /* USB */ #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE /* @@ -98,33 +118,46 @@ #undef CONFIG_BOOTARGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#ifdef CONFIG_PRS200 +# define CFG__BOARDNAME "prs200" +# define CFG__LINUX_CONSOLE "ttyS0" +#else +# define CFG__BOARDNAME "mcc200" +# define CFG__LINUX_CONSOLE "ttyEU7" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "hostname=mcc200\0" \ + "hostname=" CFG__BOARDNAME "\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=${console},${baudrate}\0" \ + "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ + "flash_self=run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "net_nfs=tftp 200000 ${bootfile};" \ + "run nfsargs addip addcons;bootm\0" \ + "console=" CFG__LINUX_CONSOLE "\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/mcc200/uImage\0" \ - "baudrate=115200\0" \ - "load=tftp 200000 /tftpboot/mcc200/u-boot.bin\0" \ - "update=protect off FFF00000 +${filesize};" \ - "era FFF00000 +${filesize};" \ - "cp.b 200000 FFF00000 ${filesize}\0" \ - "serverip=192.168.1.1\0" \ - "ipaddr=192.168.133.144\0" \ - "netmask=255.255.0.0\0" \ + "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \ + "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \ + "text_base=" MK_STR(TEXT_BASE) "\0" \ + "update=protect off ${text_base} +${filesize};" \ + "era ${text_base} +${filesize};" \ + "cp.b 200000 ${text_base} ${filesize}\0" \ "unlock=yes\0" \ - "ethaddr=00:02:44:7D:73:3B\0" \ "" +#undef MK_STR +#undef XMK_STR #define CONFIG_BOOTCOMMAND "run flash_self" @@ -134,7 +167,7 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ /* * I2C configuration @@ -150,9 +183,9 @@ * TEXT base always at 0xFFF00000 * ENV_ADDR always at 0xFFF40000 * FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!) - * 0xFE000000 for 32 MB - * 0xFF000000 for 16 MB - * 0xFF800000 for 8 MB + * 0xFE000000 for 32 MB + * 0xFF000000 for 16 MB + * 0xFF800000 for 8 MB */ #define CFG_FLASH_BASE 0xfc000000 #define CFG_FLASH_SIZE 0x04000000 @@ -174,9 +207,9 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ -#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -206,7 +239,7 @@ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) # define CFG_RAMBOOT 1 #endif @@ -226,27 +259,45 @@ #define CONFIG_PHY_ADDR 1 /* + * LCD Splash Screen + */ +#if !defined(CONFIG_PRS200) +#define CONFIG_LCD 1 +#endif + +#if defined(CONFIG_LCD) +#define CONFIG_SPLASH_SCREEN 1 +#define CFG_CONSOLE_IS_IN_ENV 1 +#define LCD_BPP LCD_MONOCHROME +#endif + +/* * GPIO configuration */ /* 0x10000004 = 32MB SDRAM */ /* 0x90000004 = 64MB SDRAM */ +#if defined(CONFIG_LCD) +/* set PSC2 in UART mode */ +#define CFG_GPS_PORT_CONFIG 0x00000044 +#else #define CFG_GPS_PORT_CONFIG 0x00000004 +#endif /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ #define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #define CFG_LOAD_ADDR 0x100000 /* default load address */ @@ -309,7 +360,7 @@ * One of four SC16C554 UARTs is selected with * A3-A4 (DA5-DA6) lines. */ -#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) +#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) && !defined(CONFIG_PRS200) #define CFG_NS16550_COM1 (CFG_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5) #elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9) #define CFG_NS16550_COM1 (CFG_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5) diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index a13d6a8..89e9164 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -158,7 +158,13 @@ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ @@ -219,6 +225,9 @@ #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ #define CONFIG_PHY_RESET_DELAY 1000 +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ @@ -226,6 +235,7 @@ CFG_CMD_DHCP | \ CFG_CMD_DIAG | \ CFG_CMD_ELF | \ + CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_IRQ | \ CFG_CMD_MII | \ @@ -264,15 +274,12 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ -#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ - -#define CONFIG_NETCONSOLE /* include NetConsole support */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 50c1c4f..23bdfc8 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -63,6 +63,7 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in SDRAM) *----------------------------------------------------------------------*/ +#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (8 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 5a434dc..6e4fdb2 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -197,12 +197,16 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 #define CFG_PCI_MEM_BASE 0xC0000000 #define CFG_PCI_MEM_PHYS 0xC0000000 diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h new file mode 100644 index 0000000..1a460cd --- /dev/null +++ b/include/configs/sequoia.h @@ -0,0 +1,430 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2006 + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * sequoia.h - configuration for Sequoia board (PowerPC440EPx) + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */ +#ifndef CONFIG_RAINIER +#define CONFIG_SEQUOIA 1 /* Board is Sequoia */ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#else +#define CONFIG_440GRX 1 /* Specific PPC440GRx */ +#endif +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ + +#define CFG_BOOT_BASE_ADDR 0xf0000000 +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */ +#define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + +/* Don't change either of these */ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ + +#define CFG_USB2D0_BASE 0xe0000100 +#define CFG_USB_DEVICE 0xe0000000 +#define CFG_USB_HOST 0xe0000400 +#define CFG_BCSR_BASE 0xc0000000 + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer + *----------------------------------------------------------------------*/ +/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ +#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ +#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ + +#define CFG_INIT_RAM_END (4 << 10) +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI 1 +/* define this if you want console on UART1 */ +#undef CONFIG_UART1_CONSOLE + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#else +#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#endif + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/* + * IPL (Initial Program Loader, integrated inside CPU) + * Will load first 4k from NAND (SPL) into cache and execute it from there. + * + * SPL (Secondary Program Loader) + * Will load special U-Boot version (NUB) from NAND and execute it. This SPL + * has to fit into 4kByte. It sets up the CPU and configures the SDRAM + * controller and the NAND controller so that the special U-Boot image can be + * loaded from NAND to SDRAM. + * + * NUB (NAND U-Boot) + * This NAND U-Boot (NUB) is a special U-Boot version which can be started + * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + * + * On 440EPx the SPL is copied to SDRAM before the NAND controller is + * set up. While still running from cache, I experienced problems accessing + * the NAND controller. sr - 2006-08-25 + */ +#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ +#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ +#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */ +#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ +#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) + +/* + * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + */ +#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ + +/* + * Now the NAND chip has to be defined (no autodetection used!) + */ +#define CFG_NAND_PAGE_SIZE (512) /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT (32) /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS (5) /* Location of bad block marker */ +#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ + +#ifdef CFG_ENV_IS_IN_NAND +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/sequoia/u-boot-nand.lds for details. + */ +#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CFG_MBYTES_SDRAM (256) /* 256MB */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_AD7414 1 /* use AD7414 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=sequoia\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xxFP\0" \ + "bootfile=/tftpboot/sequoia/uImage\0" \ + "kernel_addr=FC000000\0" \ + "ramdisk_addr=FC180000\0" \ + "load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0" \ + "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ + "cp.b 100000 FFFA0000 60000\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_M88E1111_PHY 1 +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 1 + +/* USB */ +#ifdef CONFIG_440EPX +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* Comment this out to enable USB 1.1 device */ +#define USB_2_0_DEVICE + +#define CMD_USB CFG_CMD_USB +#else +#define CMD_USB 0 /* no USB on 440GRx */ +#endif /* CONFIG_440EPX */ + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_DTT | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NAND | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CMD_USB) + +#define CONFIG_SUPPORT_VFAT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------*/ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE +#define CFG_NAND 0xD0000000 +#define CFG_CPLD 0xC0000000 + +/* + * On Sequoia CS0 and CS3 are switched when configuring for NAND booting + */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CFG_NAND_CS 3 /* NAND chip connected to CSx */ +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x03017300 +#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000) + +/* Memory Bank 3 (NAND-FLASH) initialization */ +#define CFG_EBC_PB3AP 0x018003c0 +#define CFG_EBC_PB3CR (CFG_NAND | 0x1c000) +#else +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ +/* Memory Bank 3 (NOR-FLASH) initialization */ +#define CFG_EBC_PB3AP 0x03017300 +#define CFG_EBC_PB3CR (CFG_FLASH | 0xda000) + +/* Memory Bank 0 (NAND-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x018003c0 +#define CFG_EBC_PB0CR (CFG_NAND | 0x1c000) +#endif + +/* Memory Bank 2 (CPLD) initialization */ +#define CFG_EBC_PB2AP 0x24814580 +#define CFG_EBC_PB2CR (CFG_CPLD | 0x38000) + +/*----------------------------------------------------------------------- + * NAND FLASH + *----------------------------------------------------------------------*/ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) +#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h index 3d907f8..4937638 100644 --- a/include/configs/sorcery.h +++ b/include/configs/sorcery.h @@ -261,6 +261,7 @@ #define CONFIG_MPC8220_FEC 1 #define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ #define CONFIG_PHY_ADDR 0x1F +#define CONFIG_MII 1 /* * Miscellaneous configurable options diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index e218597..625cf20 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -172,8 +172,11 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F @@ -183,6 +186,7 @@ /* I did the 'if 0' so we could keep the syntax above if ever needed. */ #undef CFG_I2C_NOPROBES #endif +#define CFG_I2C_OFFSET 0x3000 /* RapdIO Map configuration, mapped 1:1. */ diff --git a/include/configs/v38b.h b/include/configs/v38b.h new file mode 100644 index 0000000..554a7a4 --- /dev/null +++ b/include/configs/v38b.h @@ -0,0 +1,343 @@ +/* + * (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering, + * wd@denx.de. + * + * See file CREDITS for list of people who contributed to this project. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ +#define CONFIG_V38B 1 /* ...on V38B board */ +#define CFG_MPC5XXX_CLKIN 33000000 /* ...running at 33.000000MHz */ + +#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */ +#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */ + +#undef CONFIG_HW_WATCHDOG /* don't use watchdog */ + +#define CONFIG_NETCONSOLE 1 + +#define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */ + +#define CFG_XLB_PIPELINING 1 /* gives better performance */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * DDR + */ +#define SDRAM_DDR 1 /* is DDR */ +/* Settings for XLB = 132 MHz */ +#define SDRAM_MODE 0x018D0000 +#define SDRAM_EMODE 0x40090000 +#define SDRAM_CONTROL 0x704f0f00 +#define SDRAM_CONFIG1 0x73722930 +#define SDRAM_CONFIG2 0x47770000 +#define SDRAM_TAPDELAY 0x10000000 + +/* + * PCI - no suport + */ +#undef CONFIG_PCI + +/* + * Partitions + */ +#define CONFIG_MAC_PARTITION 1 +#define CONFIG_DOS_PARTITION 1 + +/* + * USB + */ +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IDE | \ + CFG_CMD_PING | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_IRQ | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_MII | \ + CFG_CMD_SDRAMi | \ + CFG_CMD_DATE | \ + CFG_CMD_USB | \ + CFG_CMD_FAT) + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Boot low with 16 MB Flash + */ +#define CFG_LOWBOOT 1 +#define CFG_LOWBOOT16 1 + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootcmd=run net_nfs\0" \ + "bootdelay=3\0" \ + "baudrate=115200\0" \ + "preboot=echo;echo Type \"run flash_nfs\" to mount root " \ + "filesystem over NFS; echo\0" \ + "netdev=eth0\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):" \ + "$(netmask):$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;bootm $(kernel_addr) " \ + "$(ramdisk_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "hostname=v38b\0" \ + "ethact=FEC ETHERNET\0" \ + "rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \ + "update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \ + "cp.b 200000 ff000000 $(filesize);" \ + "prot on ff000000 ff03ffff\0" \ + "load=tftp 200000 $(u-boot)\0" \ + "netmask=255.255.0.0\0" \ + "ipaddr=192.168.160.18\0" \ + "serverip=192.168.1.1\0" \ + "ethaddr=00:e0:ee:00:05:2e\0" \ + "bootfile=/tftpboot/v38b/uImage\0" \ + "u-boot=/tftpboot/v38b/u-boot.bin\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run net_nfs" + +#if defined(CONFIG_MPC5200) +/* + * IPB Bus clocking configuration. + */ +#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#endif + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 + +/* + * RTC configuration + */ +#define CFG_I2C_RTC_ADDR 0x51 + +/* + * Flash configuration - use CFI driver + */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_CFI_AMD_RESET 1 +#define CFG_FLASH_BASE 0xFF000000 +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_SIZE 0x01000000 /* 16 MiB */ +#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* flash write speed-up */ + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000) +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_OVERWRITE 1 + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Linux initial memory map */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_PHY_ADDR 0x00 +#define CONFIG_MII 1 + +/* + * GPIO configuration + */ +#define CFG_GPS_PORT_CONFIG 0x90001404 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00047801 +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333333 + +#define CFG_RESET_ADDRESS 0xff000000 + +/* + * IDE/ATA (supports IDE harddisk) + */ +#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */ +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +#define CFG_ATA_DATA_OFFSET (0x0060) /* data I/O offset */ + +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) /* normal register accesses offset */ + +#define CFG_ATA_ALT_OFFSET (0x005C) /* alternate registers offset */ + +#define CFG_ATA_STRIDE 4 /* Interval between registers */ + +/* + * Status LED + */ +#define CONFIG_STATUS_LED /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ + +#define CFG_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */ +#ifndef __ASSEMBLY__ +typedef unsigned int led_id_t; + +#define __led_toggle(_msk) \ + do { \ + *((volatile long *) (CFG_LED_BASE)) ^= (_msk); \ + } while(0) + +#define __led_set(_msk, _st) \ + do { \ + if ((_st)) \ + *((volatile long *) (CFG_LED_BASE)) &= ~(_msk); \ + else \ + *((volatile long *) (CFG_LED_BASE)) |= (_msk); \ + } while(0) + +#define __led_init(_msk, st) \ + do { \ + *((volatile long *) (CFG_LED_BASE)) |= 0x34; \ + } while(0) +#endif /* __ASSEMBLY__ */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/walnut.h b/include/configs/walnut.h index 1171ee5..28abd6e 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -90,6 +90,11 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ +#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* needed for NetConsole */ + #define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ @@ -97,6 +102,7 @@ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ CFG_CMD_I2C | \ CFG_CMD_IRQ | \ @@ -156,16 +162,12 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ -#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ - -#define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_NET_MULTI /* needed for NetConsole */ - /*----------------------------------------------------------------------- * I2C stuff *----------------------------------------------------------------------- @@ -175,6 +177,13 @@ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h index 7d55566..ba27f37 100644 --- a/include/configs/yellowstone.h +++ b/include/configs/yellowstone.h @@ -65,6 +65,7 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in SDRAM) *----------------------------------------------------------------------*/ +#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (8 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ @@ -109,6 +110,8 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ + #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #ifdef CFG_ENV_IS_IN_FLASH @@ -229,6 +232,7 @@ CFG_CMD_DHCP | \ CFG_CMD_DIAG | \ CFG_CMD_ELF | \ + CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_IRQ | \ CFG_CMD_MII | \ @@ -265,6 +269,12 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index a81cf34..3d7b4a2 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -65,6 +65,7 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in SDRAM) *----------------------------------------------------------------------*/ +#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (8 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ @@ -231,6 +232,7 @@ CFG_CMD_DHCP | \ CFG_CMD_DIAG | \ CFG_CMD_ELF | \ + CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_IRQ | \ CFG_CMD_MII | \ @@ -272,6 +274,12 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 0e58e7e..a6532b5 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -31,9 +31,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define DEBUG -#undef DEBUG - /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ @@ -63,17 +60,20 @@ #define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ #define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */ -#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CFG_PCI_MEMBASE1 0x90000000 /* mapped pci memory */ -#define CFG_PCI_MEMBASE2 0xa0000000 /* mapped pci memory */ -#define CFG_PCI_MEMBASE3 0xb0000000 /* mapped pci memory */ - +#define CFG_PCI_MEMBASE 0x80000000 /* mapped PCI memory */ #define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */ -#define CFG_PCI_TARGBASE 0x80000000 /*PCIaddr mapped to CFG_PCI_MEMBASE*/ +#define CFG_PCI_TARGBASE CFG_PCI_MEMBASE + +#define CFG_PCIE_MEMBASE 0xb0000000 /* mapped PCIe memory */ +#define CFG_PCIE_MEMSIZE 0x01000000 +#define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ -/* #define CFG_PCI_BASE_IO 0xB8000000 */ /* internal PCI I-O */ -/* #define CFG_PCI_BASE_REGS 0xBEC00000 */ /* internal PCI regs */ -/* #define CFG_PCI_BASE_CYCLE 0xBED00000 */ /* internal PCI regs */ +#define CFG_PCIE0_CFGBASE 0xc0000000 +#define CFG_PCIE0_XCFGBASE 0xc0000400 +#define CFG_PCIE1_CFGBASE 0xc0001000 +#define CFG_PCIE1_XCFGBASE 0xc0001400 +#define CFG_PCIE2_CFGBASE 0xc0002000 +#define CFG_PCIE2_XCFGBASE 0xc0002400 /* System RAM mapped to PCI space */ #define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE @@ -220,6 +220,9 @@ #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* needed for NetConsole */ + #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -245,6 +248,12 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ @@ -292,6 +301,7 @@ */ /* Support for Intel 82557/82559/82559ER chips. */ #define CONFIG_EEPRO100 + /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is @@ -506,8 +516,8 @@ #define FPGA_REG1C_PE1_WAKE 0x0040 #define FPGA_REG1C_PE2_WAKE 0x0020 #define FPGA_REG1C_PE0_PERST 0x0010 -#define FPGA_REG1C_PE1_PERST 0x0080 -#define FPGA_REG1C_PE2_PERST 0x0040 +#define FPGA_REG1C_PE1_PERST 0x0008 +#define FPGA_REG1C_PE2_PERST 0x0004 /*----------------------------------------------------------------------------+ | Defines diff --git a/include/environment.h b/include/environment.h index 422f800..26b0712 100644 --- a/include/environment.h +++ b/include/environment.h @@ -79,6 +79,10 @@ # ifdef CFG_ENV_OFFSET_REDUND # define CFG_REDUNDAND_ENVIRONMENT # endif +# if defined(CONFIG_NAND_U_BOOT) +/* Use embedded environment in NAND boot versions */ +# define ENV_IS_EMBEDDED 1 +# endif #endif /* CFG_ENV_IS_IN_NAND */ diff --git a/include/exports.h b/include/exports.h index 0eaf66e..8f7f617 100644 --- a/include/exports.h +++ b/include/exports.h @@ -20,6 +20,9 @@ void udelay(unsigned long); unsigned long get_timer(unsigned long); void vprintf(const char *, va_list); void do_reset (void); +unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base); +char *getenv (char *name); +void setenv (char *varname, char *varvalue); #if (CONFIG_COMMANDS & CFG_CMD_I2C) int i2c_write (uchar, uint, int , uchar* , int); int i2c_read (uchar, uint, int , uchar* , int); @@ -37,7 +40,7 @@ enum { XF_MAX }; -#define XF_VERSION 2 +#define XF_VERSION 3 #if defined(CONFIG_I386) extern gd_t *global_data; diff --git a/include/fat.h b/include/fat.h index 0645458..92638d5 100644 --- a/include/fat.h +++ b/include/fat.h @@ -175,15 +175,19 @@ typedef struct dir_slot { __u8 name11_12[4]; /* Last 2 characters in name */ } dir_slot; -/* Private filesystem parameters */ +/* Private filesystem parameters + * + * Note: FAT buffer has to be 32 bit aligned + * (see FAT32 accesses) + */ typedef struct { + __u8 fatbuf[FATBUFSIZE]; /* Current FAT buffer */ int fatsize; /* Size of FAT in bits */ __u16 fatlength; /* Length of FAT in sectors */ __u16 fat_sect; /* Starting sector of the FAT */ __u16 rootdir_sect; /* Start sector of root directory */ __u16 clust_size; /* Size of clusters in sectors */ short data_begin; /* The sector of the first cluster, can be negative */ - __u8 fatbuf[FATBUFSIZE]; /* Current FAT buffer */ int fatbufnum; /* Used by get_fatent, init to -1 */ } fsdata; diff --git a/include/flash.h b/include/flash.h index 84b48a9..9c57cbc 100644 --- a/include/flash.h +++ b/include/flash.h @@ -43,9 +43,14 @@ typedef struct { ulong write_tout; /* maximum write timeout */ ulong buffer_write_tout; /* maximum buffer write timeout */ ushort vendor; /* the primary vendor id */ - ushort cmd_reset; /* Vendor specific reset command */ + ushort cmd_reset; /* vendor specific reset command */ ushort interface; /* used for x8/x16 adjustments */ ushort legacy_unlock; /* support Intel legacy (un)locking */ + uchar manufacturer_id; /* manufacturer id */ + ushort device_id; /* device id */ + ushort device_id2; /* extended device id */ + ushort ext_addr; /* extended query table address */ + ushort cfi_version; /* cfi version */ #endif } flash_info_t; @@ -209,6 +214,9 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define AMD_ID_GL064M_3 0x22012201 /* 3rd ID word for S29GL064M-R6 */ #define AMD_ID_GL064MT_2 0x22102210 /* 2nd ID word for S29GL064M-R3 (top boot sector) */ #define AMD_ID_GL064MT_3 0x22012201 /* 3rd ID word for S29GL064M-R3 (top boot sector) */ +#define AMD_ID_GL128N_2 0x22212221 /* 2nd ID word for S29GL128N */ +#define AMD_ID_GL128N_3 0x22012201 /* 3rd ID word for S29GL128N */ + #define AMD_ID_LV320B_2 0x221A221A /* 2d ID word for AM29LV320MB at 0x38 */ #define AMD_ID_LV320B_3 0x22002200 /* 3d ID word for AM29LV320MB at 0x3c */ @@ -417,6 +425,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define FLASH_FUJLV650 0x00D0 /* Fujitsu MBM 29LV650UE/651UE */ #define FLASH_MT28S4M16LC 0x00E1 /* Micron MT28S4M16LC */ #define FLASH_S29GL064M 0x00F0 /* Spansion S29GL064M-R6 */ +#define FLASH_S29GL128N 0x00F1 /* Spansion S29GL128N */ #define FLASH_UNKNOWN 0xFFFF /* unknown flash type */ @@ -435,6 +444,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define FLASH_MAN_MT 0x00400000 #define FLASH_MAN_SHARP 0x00500000 #define FLASH_MAN_ATM 0x00600000 +#define FLASH_MAN_CFI 0x01000000 #define FLASH_TYPEMASK 0x0000FFFF /* extract FLASH type information */ diff --git a/include/ft_build.h b/include/ft_build.h index 47ca575..89c689c 100644 --- a/include/ft_build.h +++ b/include/ft_build.h @@ -36,19 +36,18 @@ struct boot_param_header { struct ft_cxt { struct boot_param_header *bph; - int max_size; /* maximum size of tree */ - int overflow; /* set when this happens */ - u8 *p, *pstr, *pres; /* running pointers */ - u8 *p_begin, *pstr_begin, *pres_begin; /* starting pointers */ - u8 *p_anchor; /* start of constructed area */ - int struct_size, strings_size, res_size; + u8 *p_rsvmap; + u8 *p_start; /* pointer to beginning of dt_struct */ + u8 *p_end; /* pointer to end of dt_strings */ + u8 *p; /* pointer to end of dt_struct and beginning of dt_strings */ }; void ft_begin_node(struct ft_cxt *cxt, const char *name); +void ft_init_cxt(struct ft_cxt *cxt, void *blob); void ft_end_node(struct ft_cxt *cxt); -void ft_begin_tree(struct ft_cxt *cxt); -int ft_end_tree(struct ft_cxt *cxt); +void ft_end_tree(struct ft_cxt *cxt); +void ft_finalize_tree(struct ft_cxt *cxt); void ft_nop(struct ft_cxt *cxt); void ft_prop(struct ft_cxt *cxt, const char *name, const void *data, int sz); @@ -57,12 +56,16 @@ void ft_prop_int(struct ft_cxt *cxt, const char *name, int val); void ft_begin(struct ft_cxt *cxt, void *blob, int max_size); void ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size); -void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_end); +void ft_setup(void *blob, bd_t * bd, ulong initrd_start, ulong initrd_end); void ft_dump_blob(const void *bphp); void ft_merge_blob(struct ft_cxt *cxt, void *blob); void *ft_get_prop(void *bphp, const char *propname, int *szp); +#ifdef CONFIG_OF_BOARD_SETUP void ft_board_setup(void *blob, bd_t *bd); +void ft_cpu_setup(void *blob, bd_t *bd); +void ft_pci_setup(void *blob, bd_t *bd); +#endif #endif diff --git a/include/image.h b/include/image.h index 139df0b..2f575fd 100644 --- a/include/image.h +++ b/include/image.h @@ -76,6 +76,7 @@ #define IH_CPU_MICROBLAZE 14 /* MicroBlaze */ #define IH_CPU_NIOS2 15 /* Nios-II */ #define IH_CPU_BLACKFIN 16 /* Blackfin */ +#define IH_CPU_AVR32 17 /* AVR32 */ /* * Image Types @@ -124,6 +125,7 @@ #define IH_TYPE_FIRMWARE 5 /* Firmware Image */ #define IH_TYPE_SCRIPT 6 /* Script file */ #define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */ +#define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */ /* * Compression Types diff --git a/include/lcd.h b/include/lcd.h index 7e23736..b688583 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -148,7 +148,14 @@ typedef struct vidinfo { extern vidinfo_t panel_info; -#endif /* CONFIG_MPC823 or CONFIG_PXA250 */ +#elif defined(CONFIG_MCC200) +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 160) */ + ushort vl_row; /* Number of rows (i.e. 100) */ + + u_char vl_bpix; /* Bits per pixel, 0 = 1 */ +} vidinfo_t; +#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 */ /* Video functions */ diff --git a/include/linux/mtd/compat.h b/include/linux/mtd/compat.h index 460cd45..fe55087 100644 --- a/include/linux/mtd/compat.h +++ b/include/linux/mtd/compat.h @@ -31,11 +31,13 @@ #define max_t(type,x,y) \ ({ type __x = (x); type __y = (y); __x > __y ? __x: __y; }) +#ifndef BUG #define BUG() do { \ printf("U-Boot BUG at %s:%d!\n", __FILE__, __LINE__); \ } while (0) #define BUG_ON(condition) do { if (condition) BUG(); } while(0) +#endif /* BUG */ #define likely(x) __builtin_expect(!!(x), 1) #define unlikely(x) __builtin_expect(!!(x), 0) diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h new file mode 100644 index 0000000..d0558a9 --- /dev/null +++ b/include/linux/mtd/ndfc.h @@ -0,0 +1,67 @@ +/* + * linux/include/linux/mtd/ndfc.h + * + * Copyright (c) 2006 Thomas Gleixner <tglx@linutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Info: + * Contains defines, datastructures for ndfc nand controller + * + */ +#ifndef __LINUX_MTD_NDFC_H +#define __LINUX_MTD_NDFC_H + +/* NDFC Register definitions */ +#define NDFC_CMD 0x00 +#define NDFC_ALE 0x04 +#define NDFC_DATA 0x08 +#define NDFC_ECC 0x10 +#define NDFC_BCFG0 0x30 +#define NDFC_BCFG1 0x34 +#define NDFC_BCFG2 0x38 +#define NDFC_BCFG3 0x3c +#define NDFC_CCR 0x40 +#define NDFC_STAT 0x44 +#define NDFC_HWCTL 0x48 +#define NDFC_REVID 0x50 + +#define NDFC_STAT_IS_READY 0x01000000 + +#define NDFC_CCR_RESET_CE 0x80000000 /* CE Reset */ +#define NDFC_CCR_RESET_ECC 0x40000000 /* ECC Reset */ +#define NDFC_CCR_RIE 0x20000000 /* Interrupt Enable on Device Rdy */ +#define NDFC_CCR_REN 0x10000000 /* Enable wait for Rdy in LinearR */ +#define NDFC_CCR_ROMEN 0x08000000 /* Enable ROM In LinearR */ +#define NDFC_CCR_ARE 0x04000000 /* Auto-Read Enable */ +#define NDFC_CCR_BS(x) (((x) & 0x3) << 24) /* Select Bank on CE[x] */ +#define NDFC_CCR_BS_MASK 0x03000000 /* Select Bank */ +#define NDFC_CCR_ARAC0 0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */ +#define NDFC_CCR_ARAC1 0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */ +#define NDFC_CCR_ARAC2 0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */ +#define NDFC_CCR_ARAC3 0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */ +#define NDFC_CCR_ARAC_MASK 0x00003000 /* Auto-Read mode Addr Cycles */ +#define NDFC_CCR_RPG 0x0000C000 /* Auto-Read Page */ +#define NDFC_CCR_EBCC 0x00000004 /* EBC Configuration Completed */ +#define NDFC_CCR_DHC 0x00000002 /* Direct Hardware Control Enable */ + +#define NDFC_BxCFG_EN 0x80000000 /* Bank Enable */ +#define NDFC_BxCFG_CED 0x40000000 /* nCE Style */ +#define NDFC_BxCFG_SZ_MASK 0x08000000 /* Bank Size */ +#define NDFC_BxCFG_SZ_8BIT 0x00000000 /* 8bit */ +#define NDFC_BxCFG_SZ_16BIT 0x08000000 /* 16bit */ + +#define NDFC_MAX_BANKS 4 + +struct ndfc_controller_settings { + uint32_t ccr_settings; + uint64_t ndfc_erpn; +}; + +struct ndfc_chip_settings { + uint32_t bank_settings; +}; + +#endif diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h index 50a6ac1..089aa13 100644 --- a/include/mpc5xxx.h +++ b/include/mpc5xxx.h @@ -188,7 +188,14 @@ #define MPC5XXX_WU_GPIO_ENABLE (MPC5XXX_WU_GPIO + 0x0000) #define MPC5XXX_WU_GPIO_ODE (MPC5XXX_WU_GPIO + 0x0004) #define MPC5XXX_WU_GPIO_DIR (MPC5XXX_WU_GPIO + 0x0008) -#define MPC5XXX_WU_GPIO_DATA (MPC5XXX_WU_GPIO + 0x000c) +#define MPC5XXX_WU_GPIO_DATA_O (MPC5XXX_WU_GPIO + 0x000c) +#define MPC5XXX_WU_GPIO_DATA_I (MPC5XXX_WU_GPIO + 0x0020) + +/* GPIO pins */ +#define GPIO_WKUP_7 0x80000000UL +#define GPIO_PSC6_0 0x10000000UL +#define GPIO_PSC3_9 0x04000000UL +#define GPIO_PSC1_4 0x01000000UL /* PCI registers */ #define MPC5XXX_PCI_CMD (MPC5XXX_PCI + 0x04) @@ -232,23 +239,92 @@ #define MPC5XXX_ICTL_PER_STS (MPC5XXX_ICTL + 0x0030) #define MPC5XXX_ICTL_BUS_STS (MPC5XXX_ICTL + 0x0038) +#define NR_IRQS 64 + +/* IRQ mapping - these are our logical IRQ numbers */ +#define MPC5XXX_CRIT_IRQ_NUM 4 +#define MPC5XXX_MAIN_IRQ_NUM 17 +#define MPC5XXX_SDMA_IRQ_NUM 17 +#define MPC5XXX_PERP_IRQ_NUM 23 + +#define MPC5XXX_CRIT_IRQ_BASE 1 +#define MPC5XXX_MAIN_IRQ_BASE (MPC5XXX_CRIT_IRQ_BASE + MPC5XXX_CRIT_IRQ_NUM) +#define MPC5XXX_SDMA_IRQ_BASE (MPC5XXX_MAIN_IRQ_BASE + MPC5XXX_MAIN_IRQ_NUM) +#define MPC5XXX_PERP_IRQ_BASE (MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM) + +#define MPC5XXX_IRQ0 (MPC5XXX_CRIT_IRQ_BASE + 0) +#define MPC5XXX_SLICE_TIMER_0_IRQ (MPC5XXX_CRIT_IRQ_BASE + 1) +#define MPC5XXX_HI_INT_IRQ (MPC5XXX_CRIT_IRQ_BASE + 2) +#define MPC5XXX_CCS_IRQ (MPC5XXX_CRIT_IRQ_BASE + 3) + +#define MPC5XXX_IRQ1 (MPC5XXX_MAIN_IRQ_BASE + 1) +#define MPC5XXX_IRQ2 (MPC5XXX_MAIN_IRQ_BASE + 2) +#define MPC5XXX_IRQ3 (MPC5XXX_MAIN_IRQ_BASE + 3) +#define MPC5XXX_RTC_PINT_IRQ (MPC5XXX_MAIN_IRQ_BASE + 5) +#define MPC5XXX_RTC_SINT_IRQ (MPC5XXX_MAIN_IRQ_BASE + 6) +#define MPC5XXX_RTC_GPIO_STD_IRQ (MPC5XXX_MAIN_IRQ_BASE + 7) +#define MPC5XXX_RTC_GPIO_WKUP_IRQ (MPC5XXX_MAIN_IRQ_BASE + 8) +#define MPC5XXX_TMR0_IRQ (MPC5XXX_MAIN_IRQ_BASE + 9) +#define MPC5XXX_TMR1_IRQ (MPC5XXX_MAIN_IRQ_BASE + 10) +#define MPC5XXX_TMR2_IRQ (MPC5XXX_MAIN_IRQ_BASE + 11) +#define MPC5XXX_TMR3_IRQ (MPC5XXX_MAIN_IRQ_BASE + 12) +#define MPC5XXX_TMR4_IRQ (MPC5XXX_MAIN_IRQ_BASE + 13) +#define MPC5XXX_TMR5_IRQ (MPC5XXX_MAIN_IRQ_BASE + 14) +#define MPC5XXX_TMR6_IRQ (MPC5XXX_MAIN_IRQ_BASE + 15) +#define MPC5XXX_TMR7_IRQ (MPC5XXX_MAIN_IRQ_BASE + 16) + +#define MPC5XXX_SDMA_IRQ (MPC5XXX_PERP_IRQ_BASE + 0) +#define MPC5XXX_PSC1_IRQ (MPC5XXX_PERP_IRQ_BASE + 1) +#define MPC5XXX_PSC2_IRQ (MPC5XXX_PERP_IRQ_BASE + 2) +#define MPC5XXX_PSC3_IRQ (MPC5XXX_PERP_IRQ_BASE + 3) +#define MPC5XXX_PSC6_IRQ (MPC5XXX_PERP_IRQ_BASE + 4) +#define MPC5XXX_IRDA_IRQ (MPC5XXX_PERP_IRQ_BASE + 4) +#define MPC5XXX_FEC_IRQ (MPC5XXX_PERP_IRQ_BASE + 5) +#define MPC5XXX_USB_IRQ (MPC5XXX_PERP_IRQ_BASE + 6) +#define MPC5XXX_ATA_IRQ (MPC5XXX_PERP_IRQ_BASE + 7) +#define MPC5XXX_PCI_CNTRL_IRQ (MPC5XXX_PERP_IRQ_BASE + 8) +#define MPC5XXX_PCI_SCIRX_IRQ (MPC5XXX_PERP_IRQ_BASE + 9) +#define MPC5XXX_PCI_SCITX_IRQ (MPC5XXX_PERP_IRQ_BASE + 10) +#define MPC5XXX_PSC4_IRQ (MPC5XXX_PERP_IRQ_BASE + 11) +#define MPC5XXX_PSC5_IRQ (MPC5XXX_PERP_IRQ_BASE + 12) +#define MPC5XXX_SPI_MODF_IRQ (MPC5XXX_PERP_IRQ_BASE + 13) +#define MPC5XXX_SPI_SPIF_IRQ (MPC5XXX_PERP_IRQ_BASE + 14) +#define MPC5XXX_I2C1_IRQ (MPC5XXX_PERP_IRQ_BASE + 15) +#define MPC5XXX_I2C2_IRQ (MPC5XXX_PERP_IRQ_BASE + 16) +#define MPC5XXX_MSCAN1_IRQ (MPC5XXX_PERP_IRQ_BASE + 17) +#define MPC5XXX_MSCAN2_IRQ (MPC5XXX_PERP_IRQ_BASE + 18) +#define MPC5XXX_IR_RX_IRQ (MPC5XXX_PERP_IRQ_BASE + 19) +#define MPC5XXX_IR_TX_IRQ (MPC5XXX_PERP_IRQ_BASE + 20) +#define MPC5XXX_XLB_ARB_IRQ (MPC5XXX_PERP_IRQ_BASE + 21) +#define MPC5XXX_BDLC_IRQ (MPC5XXX_PERP_IRQ_BASE + 22) + /* General Purpose Timers registers */ #define MPC5XXX_GPT0_ENABLE (MPC5XXX_GPT + 0x0) #define MPC5XXX_GPT0_COUNTER (MPC5XXX_GPT + 0x4) +#define MPC5XXX_GPT0_STATUS (MPC5XXX_GPT + 0x0C) #define MPC5XXX_GPT1_ENABLE (MPC5XXX_GPT + 0x10) #define MPC5XXX_GPT1_COUNTER (MPC5XXX_GPT + 0x14) +#define MPC5XXX_GPT1_STATUS (MPC5XXX_GPT + 0x1C) #define MPC5XXX_GPT2_ENABLE (MPC5XXX_GPT + 0x20) #define MPC5XXX_GPT2_COUNTER (MPC5XXX_GPT + 0x24) +#define MPC5XXX_GPT2_STATUS (MPC5XXX_GPT + 0x2C) #define MPC5XXX_GPT3_ENABLE (MPC5XXX_GPT + 0x30) #define MPC5XXX_GPT3_COUNTER (MPC5XXX_GPT + 0x34) +#define MPC5XXX_GPT3_STATUS (MPC5XXX_GPT + 0x3C) #define MPC5XXX_GPT4_ENABLE (MPC5XXX_GPT + 0x40) #define MPC5XXX_GPT4_COUNTER (MPC5XXX_GPT + 0x44) +#define MPC5XXX_GPT4_STATUS (MPC5XXX_GPT + 0x4C) #define MPC5XXX_GPT5_ENABLE (MPC5XXX_GPT + 0x50) +#define MPC5XXX_GPT5_STATUS (MPC5XXX_GPT + 0x5C) #define MPC5XXX_GPT5_COUNTER (MPC5XXX_GPT + 0x54) #define MPC5XXX_GPT6_ENABLE (MPC5XXX_GPT + 0x60) #define MPC5XXX_GPT6_COUNTER (MPC5XXX_GPT + 0x64) +#define MPC5XXX_GPT6_STATUS (MPC5XXX_GPT + 0x6C) #define MPC5XXX_GPT7_ENABLE (MPC5XXX_GPT + 0x70) #define MPC5XXX_GPT7_COUNTER (MPC5XXX_GPT + 0x74) +#define MPC5XXX_GPT7_STATUS (MPC5XXX_GPT + 0x7C) + +#define MPC5XXX_GPT_GPIO_PIN(status) ((0x00000100 & (status)) >> 8) #define MPC5XXX_GPT7_PWMCFG (MPC5XXX_GPT + 0x78) diff --git a/include/mpc86xx.h b/include/mpc86xx.h new file mode 100644 index 0000000..bc8ba3f --- /dev/null +++ b/include/mpc86xx.h @@ -0,0 +1,116 @@ +/* + * Copyright 2006 Freescale Semiconductor. + * Jeffrey Brown + * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) + */ + +#ifndef __MPC86xx_H__ +#define __MPC86xx_H__ + +#define EXC_OFF_SYS_RESET 0x0100 /* System reset offset */ + +/* + * l2cr values. Look in config_<BOARD>.h for the actual setup + */ +#define l2cr 1017 + +#define L2CR_L2E 0x80000000 /* bit 0 - enable */ +#define L2CR_L2PE 0x40000000 /* bit 1 - data parity */ +#define L2CR_L2I 0x00200000 /* bit 10 - global invalidate bit */ +#define L2CR_L2CTL 0x00100000 /* bit 11 - l2 ram control */ +#define L2CR_L2DO 0x00010000 /* bit 15 - data-only mode */ +#define L2CR_REP 0x00001000 /* bit 19 - l2 replacement alg */ +#define L2CR_HWF 0x00000800 /* bit 20 - hardware flush */ +#define L2CR_L2IP 0x00000001 /* global invalidate in progress */ + +/* + * BAT settings. Look in config_<BOARD>.h for the actual setup + */ + +#define BATU_BL_128K 0x00000000 +#define BATU_BL_256K 0x00000004 +#define BATU_BL_512K 0x0000000c +#define BATU_BL_1M 0x0000001c +#define BATU_BL_2M 0x0000003c +#define BATU_BL_4M 0x0000007c +#define BATU_BL_8M 0x000000fc +#define BATU_BL_16M 0x000001fc +#define BATU_BL_32M 0x000003fc +#define BATU_BL_64M 0x000007fc +#define BATU_BL_128M 0x00000ffc +#define BATU_BL_256M 0x00001ffc +#define BATU_BL_512M 0x00003ffc +#define BATU_BL_1G 0x00007ffc +#define BATU_BL_2G 0x0000fffc +#define BATU_BL_4G 0x0001fffc + +#define BATU_VS 0x00000002 +#define BATU_VP 0x00000001 +#define BATU_INVALID 0x00000000 + +#define BATL_WRITETHROUGH 0x00000040 +#define BATL_CACHEINHIBIT 0x00000020 +#define BATL_MEMCOHERENCE 0x00000010 +#define BATL_GUARDEDSTORAGE 0x00000008 +#define BATL_NO_ACCESS 0x00000000 + +#define BATL_PP_MSK 0x00000003 +#define BATL_PP_00 0x00000000 /* No access */ +#define BATL_PP_01 0x00000001 /* Read-only */ +#define BATL_PP_10 0x00000002 /* Read-write */ +#define BATL_PP_11 0x00000003 + +#define BATL_PP_NO_ACCESS BATL_PP_00 +#define BATL_PP_RO BATL_PP_01 +#define BATL_PP_RW BATL_PP_10 + +#define HID0_XBSEN 0x00000100 +#define HID0_HIGH_BAT_EN 0x00800000 +#define HID0_XAEN 0x00020000 + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long freqProcessor; + unsigned long freqSystemBus; +} MPC86xx_SYS_INFO; + +#define l1icache_enable icache_enable + +void l2cache_enable(void); +void l1dcache_enable(void); + +static __inline__ unsigned long get_hid0 (void) +{ + unsigned long hid0; + asm volatile("mfspr %0, 1008" : "=r" (hid0) :); + return hid0; +} + +static __inline__ unsigned long get_hid1 (void) +{ + unsigned long hid1; + asm volatile("mfspr %0, 1009" : "=r" (hid1) :); + return hid1; +} + +static __inline__ void set_hid0 (unsigned long hid0) +{ + asm volatile("mtspr 1008, %0" : : "r" (hid0)); +} + +static __inline__ void set_hid1 (unsigned long hid1) +{ + asm volatile("mtspr 1009, %0" : : "r" (hid1)); +} + + +static __inline__ unsigned long get_l2cr (void) +{ + unsigned long l2cr_val; + asm volatile("mfspr %0, 1017" : "=r" (l2cr_val) :); + return l2cr_val; +} + +#endif /* _ASMLANGUAGE */ +#endif /* __MPC86xx_H__ */ diff --git a/include/nand.h b/include/nand.h index 905115b..23493f7 100644 --- a/include/nand.h +++ b/include/nand.h @@ -60,4 +60,65 @@ static inline int nand_erase(nand_info_t *info, ulong off, ulong size) return info->erase(info, &instr); } + +/***************************************************************************** + * declarations from nand_util.c + ****************************************************************************/ + +struct nand_write_options { + u_char *buffer; /* memory block containing image to write */ + ulong length; /* number of bytes to write */ + ulong offset; /* start address in NAND */ + int quiet; /* don't display progress messages */ + int autoplace; /* if true use auto oob layout */ + int forcejffs2; /* force jffs2 oob layout */ + int forceyaffs; /* force yaffs oob layout */ + int noecc; /* write without ecc */ + int writeoob; /* image contains oob data */ + int pad; /* pad to page size */ + int blockalign; /* 1|2|4 set multiple of eraseblocks + * to align to */ +}; + +typedef struct nand_write_options nand_write_options_t; + +struct nand_read_options { + u_char *buffer; /* memory block in which read image is written*/ + ulong length; /* number of bytes to read */ + ulong offset; /* start address in NAND */ + int quiet; /* don't display progress messages */ + int readoob; /* put oob data in image */ +}; + +typedef struct nand_read_options nand_read_options_t; + +struct nand_erase_options { + ulong length; /* number of bytes to erase */ + ulong offset; /* first address in NAND to erase */ + int quiet; /* don't display progress messages */ + int jffs2; /* if true: format for jffs2 usage + * (write appropriate cleanmarker blocks) */ + int scrub; /* if true, really clean NAND by erasing + * bad blocks (UNSAFE) */ +}; + +typedef struct nand_erase_options nand_erase_options_t; + +int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts); + +int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts); +int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts); + +#define NAND_LOCK_STATUS_TIGHT 0x01 +#define NAND_LOCK_STATUS_LOCK 0x02 +#define NAND_LOCK_STATUS_UNLOCK 0x04 + +int nand_lock( nand_info_t *meminfo, int tight ); +int nand_unlock( nand_info_t *meminfo, ulong start, ulong length ); +int nand_get_lock_status(nand_info_t *meminfo, ulong offset); + +#ifdef CFG_NAND_SELECT_DEVICE +void board_nand_select_device(struct nand_chip *nand, int chip); +#endif + #endif diff --git a/include/pci.h b/include/pci.h index 0fc00e4..7c9a0e3 100644 --- a/include/pci.h +++ b/include/pci.h @@ -270,6 +270,15 @@ #define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 4x rate */ #define PCI_AGP_SIZEOF 12 +/* PCI-X registers */ + +#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ +#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */ +#define PCI_X_CMD_MAX_READ 0x0000 /* Max Memory Read Byte Count */ +#define PCI_X_CMD_MAX_SPLIT 0x0030 /* Max Outstanding Split Transactions */ +#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ + + /* Slot Identification */ #define PCI_SID_ESR 2 /* Expansion Slot Register */ @@ -492,4 +501,7 @@ extern int pci_hose_config_device(struct pci_controller *hose, extern void pci_mpc824x_init (struct pci_controller *hose); #endif +#ifdef CONFIG_MPC85xx +extern void pci_mpc85xx_init (struct pci_controller *hose); +#endif #endif /* _PCI_H */ diff --git a/include/pci_ids.h b/include/pci_ids.h index 8cc3ec0..3b10452 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -1045,6 +1045,9 @@ #define PCI_DEVICE_ID_REALTEK_8139 0x8139 #define PCI_DEVICE_ID_REALTEK_8169 0x8169 +#define PCI_VENDOR_ID_DLINK 0x1186 +#define PCI_DEVICE_ID_DLINK_8139 0x1300 + #define PCI_VENDOR_ID_XILINX 0x10ee #define PCI_DEVICE_ID_TURBOPAM 0x4020 diff --git a/include/ppc440.h b/include/ppc440.h index d5a9f66..e407320 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -82,7 +82,10 @@ #define ivor13 0x19d /* interrupt vector offset register 13 */ #define ivor14 0x19e /* interrupt vector offset register 14 */ #define ivor15 0x19f /* interrupt vector offset register 15 */ -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define mcsrr0 0x23a /* machine check save/restore register 0 */ #define mcsrr1 0x23b /* mahcine check save/restore register 1 */ #define mcsr 0x23c /* machine check status register */ @@ -151,7 +154,18 @@ #define sdr_ecid1 0x0081 #define sdr_ecid2 0x0082 #define sdr_jtag 0x00c0 +#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) #define sdr_ddrdl 0x00e0 +#else +#define sdr_cfg 0x00e0 +#define SDR_CFG_LT2_MASK 0x01000000 /* Leakage test 2*/ +#define SDR_CFG_64_32BITS_MASK 0x01000000 /* Switch DDR 64 bits or 32 bits */ +#define SDR_CFG_32BITS 0x00000000 /* 32 bits */ +#define SDR_CFG_64BITS 0x01000000 /* 64 bits */ +#define SDR_CFG_MC_V2518_MASK 0x02000000 /* Low VDD2518 (2.5 or 1.8V) */ +#define SDR_CFG_MC_V25 0x00000000 /* 2.5 V */ +#define SDR_CFG_MC_V18 0x02000000 /* 1.8 V */ +#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */ #define sdr_ebc 0x0100 #define sdr_uart0 0x0120 /* UART0 Config */ #define sdr_uart1 0x0121 /* UART1 Config */ @@ -180,6 +194,54 @@ #define sdr_plbtr 0x4200 #define sdr_mfr 0x4300 /* SDR0_MFR reg */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* test-only!!!! */ +#define DDR0_00 0x00 +#define DDR0_01 0x01 +#define DDR0_02 0x02 +#define DDR0_03 0x03 +#define DDR0_04 0x04 +#define DDR0_05 0x05 +#define DDR0_06 0x06 +#define DDR0_07 0x07 +#define DDR0_08 0x08 +#define DDR0_09 0x09 +#define DDR0_10 0x0A +#define DDR0_11 0x0B +#define DDR0_12 0x0C +#define DDR0_13 0x0D +#define DDR0_14 0x0E +#define DDR0_15 0x0F +#define DDR0_16 0x10 +#define DDR0_17 0x11 +#define DDR0_18 0x12 +#define DDR0_19 0x13 +#define DDR0_20 0x14 +#define DDR0_21 0x15 +#define DDR0_22 0x16 +#define DDR0_23 0x17 +#define DDR0_24 0x18 +#define DDR0_25 0x19 +#define DDR0_26 0x1A +#define DDR0_27 0x1B +#define DDR0_28 0x1C +#define DDR0_29 0x1D +#define DDR0_30 0x1E +#define DDR0_31 0x1F +#define DDR0_32 0x20 +#define DDR0_33 0x21 +#define DDR0_34 0x22 +#define DDR0_35 0x23 +#define DDR0_36 0x24 +#define DDR0_37 0x25 +#define DDR0_38 0x26 +#define DDR0_39 0x27 +#define DDR0_40 0x28 +#define DDR0_41 0x29 +#define DDR0_42 0x2A +#define DDR0_43 0x2B +#define DDR0_44 0x2C +#endif /*CONFIG_440EPX*/ + /*----------------------------------------------------------------------------- | SDRAM Controller +----------------------------------------------------------------------------*/ @@ -787,7 +849,8 @@ #define xbcfg 0x23 /* external bus configuration reg */ #define xbcid 0x24 /* external bus core id reg */ -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* PLB4 to PLB3 Bridge OUT */ #define P4P3_DCR_BASE 0x020 @@ -877,6 +940,7 @@ #define plb1_bearl (PLB_ARBITER_BASE+ 0x0C) #define plb1_bearh (PLB_ARBITER_BASE+ 0x0D) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) /* Pin Function Control Register 1 */ #define SDR0_PFC1 0x4101 #define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */ @@ -918,6 +982,178 @@ #define SDR0_USB0_LEEN_DISABLE 0x00000000 /* Little Endian Disable */ #define SDR0_USB0_LEEN_ENABLE 0x00000001 /* Little Endian Enable */ +/* Miscealleneaous Function Reg. */ +#define SDR0_MFR 0x4300 +#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */ +#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000 +#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */ +#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000 +#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */ +#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */ +#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */ +#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */ +#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */ +#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */ +#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */ +#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3) + +#define SDR0_MFR_ERRATA3_EN0 0x00800000 +#define SDR0_MFR_ERRATA3_EN1 0x00400000 +#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */ +#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Enable on both EMAC3 0-1 */ +#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */ +#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */ +#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */ + +#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */ + +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR_USB2D0CR 0x0320 +#define SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK 0x00000004 /* USB 2.0 Device/EBC Master Selection */ +#define SDR0_USB2D0CR_USB2DEV_SELECTION 0x00000004 /* USB 2.0 Device Selection */ +#define SDR0_USB2D0CR_EBC_SELECTION 0x00000000 /* EBC Selection */ + +#define SDR0_USB2D0CR_USB_DEV_INT_SEL_MASK 0x00000002 /* USB Device Interface Selection */ +#define SDR0_USB2D0CR_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */ +#define SDR0_USB2D0CR_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */ + +#define SDR0_USB2D0CR_LEEN_MASK 0x00000001 /* Little Endian selection */ +#define SDR0_USB2D0CR_LEEN_DISABLE 0x00000000 /* Little Endian Disable */ +#define SDR0_USB2D0CR_LEEN_ENABLE 0x00000001 /* Little Endian Enable */ + +/* USB2 Host Control Register */ +#define SDR0_USB2H0CR 0x0340 +#define SDR0_USB2H0CR_WDINT_MASK 0x00000001 /* Host UTMI Word Interface */ +#define SDR0_USB2H0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit/60MHz */ +#define SDR0_USB2H0CR_WDINT_16BIT_30MHZ 0x00000001 /* 16-bit/30MHz */ +#define SDR0_USB2H0CR_EFLADJ_MASK 0x0000007e /* EHCI Frame Length Adjustment */ + +/* Pin Function Control Register 1 */ +#define SDR0_PFC1 0x4101 +#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */ +#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */ +#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */ + +#define SDR0_PFC1_SELECT_MASK 0x01C00000 /* Ethernet Pin Select EMAC 0 */ +#define SDR0_PFC1_SELECT_CONFIG_1_1 0x00C00000 /* 1xMII using RGMII bridge */ +#define SDR0_PFC1_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */ +#define SDR0_PFC1_SELECT_CONFIG_2 0x00C00000 /* 1xGMII using RGMII bridge */ +#define SDR0_PFC1_SELECT_CONFIG_3 0x01000000 /* 1xTBI using RGMII bridge */ +#define SDR0_PFC1_SELECT_CONFIG_4 0x01400000 /* 2xRGMII using RGMII bridge */ +#define SDR0_PFC1_SELECT_CONFIG_5 0x01800000 /* 2xRTBI using RGMII bridge */ +#define SDR0_PFC1_SELECT_CONFIG_6 0x00800000 /* 2xSMII using ZMII bridge */ + +#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */ +#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */ +#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */ +#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */ +#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */ +#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */ +#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */ +#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */ +#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */ +#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold Req Selection */ +#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */ +#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */ +#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5) Selection */ +#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */ +#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */ +#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27) Selection */ +#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En. Selected */ +#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */ +#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject Selection */ +#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject Disable */ +#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject Enable */ + +#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor En. Selection */ +#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor Enable */ +#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */ +#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */ + +/* Ethernet PLL Configuration Register */ +#define SDR0_PFC2 0x4102 +#define SDR0_PFC2_TUNE_MASK 0x01FF8000 /* Loop stability tuning bits */ +#define SDR0_PFC2_MULTI_MASK 0x00007C00 /* Frequency multiplication selector */ +#define SDR0_PFC2_RANGEB_MASK 0x00000380 /* PLLOUTB/C frequency selector */ +#define SDR0_PFC2_RANGEA_MASK 0x00000071 /* PLLOUTA frequency selector */ + +#define SDR0_PFC2_SELECT_MASK 0xE0000000 /* Ethernet Pin select EMAC1 */ +#define SDR0_PFC2_SELECT_CONFIG_1_1 0x60000000 /* 1xMII using RGMII bridge */ +#define SDR0_PFC2_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */ +#define SDR0_PFC2_SELECT_CONFIG_2 0x60000000 /* 1xGMII using RGMII bridge */ +#define SDR0_PFC2_SELECT_CONFIG_3 0x80000000 /* 1xTBI using RGMII bridge */ +#define SDR0_PFC2_SELECT_CONFIG_4 0xA0000000 /* 2xRGMII using RGMII bridge */ +#define SDR0_PFC2_SELECT_CONFIG_5 0xC0000000 /* 2xRTBI using RGMII bridge */ +#define SDR0_PFC2_SELECT_CONFIG_6 0x40000000 /* 2xSMII using ZMII bridge */ + +/* USB2PHY0 Control Register */ +#define SDR0_USB2PHY0CR 0x4103 +#define SDR0_USB2PHY0CR_UTMICN_MASK 0x00100000 /* PHY UTMI interface connection */ +#define SDR0_USB2PHY0CR_UTMICN_DEV 0x00000000 /* Device support */ +#define SDR0_USB2PHY0CR_UTMICN_HOST 0x00100000 /* Host support */ + +#define SDR0_USB2PHY0CR_DWNSTR_MASK 0x00400000 /* Select downstream port mode */ +#define SDR0_USB2PHY0CR_DWNSTR_DEV 0x00000000 /* Device */ +#define SDR0_USB2PHY0CR_DWNSTR_HOST 0x00400000 /* Host */ + +#define SDR0_USB2PHY0CR_DVBUS_MASK 0x00800000 /* VBus detect (Device mode only) */ +#define SDR0_USB2PHY0CR_DVBUS_PURDIS 0x00000000 /* Pull-up resistance on D+ is disabled */ +#define SDR0_USB2PHY0CR_DVBUS_PUREN 0x00800000 /* Pull-up resistance on D+ is enabled */ + +#define SDR0_USB2PHY0CR_WDINT_MASK 0x01000000 /* PHY UTMI data width and clock select */ +#define SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit data/60MHz */ +#define SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ 0x01000000 /* 16-bit data/30MHz */ + +#define SDR0_USB2PHY0CR_LOOPEN_MASK 0x02000000 /* Loop back test enable */ +#define SDR0_USB2PHY0CR_LOOP_ENABLE 0x00000000 /* Loop back disabled */ +#define SDR0_USB2PHY0CR_LOOP_DISABLE 0x02000000 /* Loop back enabled (only test purposes) */ + +#define SDR0_USB2PHY0CR_XOON_MASK 0x04000000 /* Force XO block on during a suspend */ +#define SDR0_USB2PHY0CR_XO_ON 0x00000000 /* PHY XO block is powered-on */ +#define SDR0_USB2PHY0CR_XO_OFF 0x04000000 /* PHY XO block is powered-off when all ports are suspended */ + +#define SDR0_USB2PHY0CR_PWRSAV_MASK 0x08000000 /* Select PHY power-save mode */ +#define SDR0_USB2PHY0CR_PWRSAV_OFF 0x00000000 /* Non-power-save mode */ +#define SDR0_USB2PHY0CR_PWRSAV_ON 0x08000000 /* Power-save mode. Valid only for full-speed operation */ + +#define SDR0_USB2PHY0CR_XOREF_MASK 0x10000000 /* Select reference clock source */ +#define SDR0_USB2PHY0CR_XOREF_INTERNAL 0x00000000 /* PHY PLL uses chip internal 48M clock as a reference */ +#define SDR0_USB2PHY0CR_XOREF_XO 0x10000000 /* PHY PLL uses internal XO block output as a reference */ + +#define SDR0_USB2PHY0CR_XOCLK_MASK 0x20000000 /* Select clock for XO block */ +#define SDR0_USB2PHY0CR_XOCLK_EXTERNAL 0x00000000 /* PHY macro used an external clock */ +#define SDR0_USB2PHY0CR_XOCLK_CRYSTAL 0x20000000 /* PHY macro uses the clock from a crystal */ + +#define SDR0_USB2PHY0CR_CLKSEL_MASK 0xc0000000 /* Select ref clk freq */ +#define SDR0_USB2PHY0CR_CLKSEL_12MHZ 0x00000000 /* Select ref clk freq = 12 MHz*/ +#define SDR0_USB2PHY0CR_CLKSEL_48MHZ 0x40000000 /* Select ref clk freq = 48 MHz*/ +#define SDR0_USB2PHY0CR_CLKSEL_24MHZ 0x80000000 /* Select ref clk freq = 24 MHz*/ + +/* Miscealleneaous Function Reg. */ +#define SDR0_MFR 0x4300 +#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */ +#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000 +#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */ +#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000 +#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */ +#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */ +#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */ +#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */ +#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */ +#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3) + +#define SDR0_MFR_ERRATA3_EN0 0x00800000 +#define SDR0_MFR_ERRATA3_EN1 0x00400000 +#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */ +#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Enable on both EMAC3 0-1 */ +#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */ +#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */ +#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */ + +#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */ + /* CUST0 Customer Configuration Register0 */ #define SDR0_CUST0 0x4000 #define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */ @@ -1007,27 +1243,18 @@ #define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */ #define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */ -/* Miscealleneaous Function Reg. */ -#define SDR0_MFR 0x4300 -#define SDR0_MFR_ETH0_CLK_SEL 0x08000000 /* Ethernet0 Clock Select */ -#define SDR0_MFR_ETH1_CLK_SEL 0x04000000 /* Ethernet1 Clock Select */ -#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */ -#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */ -#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */ -#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */ -#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */ -#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */ -#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */ -#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) -#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3) - -#define SDR0_MFR_ERRATA3_EN0 0x00800000 -#define SDR0_MFR_ERRATA3_EN1 0x00400000 -#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */ -#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */ -#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */ -#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */ -#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */ +/*----------------------------------------------------------------------------- + | Internal SRAM + +----------------------------------------------------------------------------*/ +#define ISRAM0_DCR_BASE 0x380 +#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/ +#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */ +#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */ +#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */ +#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */ +#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */ +#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */ +#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */ #else @@ -1121,7 +1348,7 @@ #define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */ #define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */ -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define UIC2_DCR_BASE 0xe0 #define uic2sr (UIC0_DCR_BASE+0x0) /* UIC2 status-Read Clear */ #define uic2srs (UIC0_DCR_BASE+0x1) /* UIC2 status-Read Set */ @@ -1343,8 +1570,8 @@ #define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */ #define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */ #if defined(CONFIG_440GX) -#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 0 Channel table pointer reg */ -#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 1 Channel table pointer reg */ +#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */ +#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */ #endif /* CONFIG_440GX */ #define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ #define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ @@ -1423,6 +1650,46 @@ #define UIC_EIR6 0x00000004 /* External interrupt 6 */ #define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ #define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ + +#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + +#define UIC_U0 0x80000000 /* UART 0 */ +#define UIC_U1 0x40000000 /* UART 1 */ +#define UIC_IIC0 0x20000000 /* IIC */ +#define UIC_KRD 0x10000000 /* Kasumi Ready for data */ +#define UIC_KDA 0x08000000 /* Kasumi Data Available */ +#define UIC_PCRW 0x04000000 /* PCI command register write */ +#define UIC_PPM 0x02000000 /* PCI power management */ +#define UIC_IIC1 0x01000000 /* IIC */ +#define UIC_SPI 0x00800000 /* SPI */ +#define UIC_EPCISER 0x00400000 /* External PCI SERR */ +#define UIC_MTE 0x00200000 /* MAL TXEOB */ +#define UIC_MRE 0x00100000 /* MAL RXEOB */ +#define UIC_D0 0x00080000 /* DMA channel 0 */ +#define UIC_D1 0x00040000 /* DMA channel 1 */ +#define UIC_D2 0x00020000 /* DMA channel 2 */ +#define UIC_D3 0x00010000 /* DMA channel 3 */ +#define UIC_UD0 0x00008000 /* UDMA irq 0 */ +#define UIC_UD1 0x00004000 /* UDMA irq 1 */ +#define UIC_UD2 0x00002000 /* UDMA irq 2 */ +#define UIC_UD3 0x00001000 /* UDMA irq 3 */ +#define UIC_HSB2D 0x00000800 /* USB2.0 Device */ +#define UIC_OHCI1 0x00000400 /* USB2.0 Host OHCI irq 1 */ +#define UIC_OHCI2 0x00000200 /* USB2.0 Host OHCI irq 2 */ +#define UIC_EIP94 0x00000100 /* Security EIP94 */ +#define UIC_ETH0 0x00000080 /* Emac 0 */ +#define UIC_ETH1 0x00000040 /* Emac 1 */ +#define UIC_EHCI 0x00000020 /* USB2.0 Host EHCI */ +#define UIC_EIR4 0x00000010 /* External interrupt 4 */ +#define UIC_UIC2NC 0x00000008 /* UIC2 non-critical interrupt */ +#define UIC_UIC2C 0x00000004 /* UIC2 critical interrupt */ +#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ +#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ + +/* For compatibility with 405 code */ +#define UIC_MAL_TXEOB UIC_MTE +#define UIC_MAL_RXEOB UIC_MRE + #elif !defined(CONFIG_440SPE) #define UIC_U0 0x80000000 /* UART 0 */ #define UIC_U1 0x40000000 /* UART 1 */ @@ -1531,6 +1798,48 @@ #define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ #define UIC_ETH1 0x00000002 /* Ethernet 1 */ #define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */ + +#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + +#define UIC_MS 0x80000000 /* MAL SERR */ +#define UIC_MTDE 0x40000000 /* MAL TXDE */ +#define UIC_MRDE 0x20000000 /* MAL RXDE */ +#define UIC_U2 0x10000000 /* UART 2 */ +#define UIC_U3 0x08000000 /* UART 3 */ +#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ +#define UIC_NDFC 0x02000000 /* NDFC */ +#define UIC_KSLE 0x01000000 /* KASUMI slave error */ +#define UIC_CT5 0x00800000 /* GPT compare timer 5 */ +#define UIC_CT6 0x00400000 /* GPT compare timer 6 */ +#define UIC_PLB34I0 0x00200000 /* PLB3X4X MIRQ0 */ +#define UIC_PLB34I1 0x00100000 /* PLB3X4X MIRQ1 */ +#define UIC_PLB34I2 0x00080000 /* PLB3X4X MIRQ2 */ +#define UIC_PLB34I3 0x00040000 /* PLB3X4X MIRQ3 */ +#define UIC_PLB34I4 0x00020000 /* PLB3X4X MIRQ4 */ +#define UIC_PLB34I5 0x00010000 /* PLB3X4X MIRQ5 */ +#define UIC_CT0 0x00008000 /* GPT compare timer 0 */ +#define UIC_CT1 0x00004000 /* GPT compare timer 1 */ +#define UIC_EIR7 0x00002000 /* External interrupt 7 */ +#define UIC_EIR8 0x00001000 /* External interrupt 8 */ +#define UIC_EIR9 0x00000800 /* External interrupt 9 */ +#define UIC_CT2 0x00000400 /* GPT compare timer 2 */ +#define UIC_CT3 0x00000200 /* GPT compare timer 3 */ +#define UIC_CT4 0x00000100 /* GPT compare timer 4 */ +#define UIC_SRE 0x00000080 /* Serial ROM error */ +#define UIC_GPTDC 0x00000040 /* GPT decrementer pulse */ +#define UIC_RSVD0 0x00000020 /* Reserved */ +#define UIC_EPCIPER 0x00000010 /* External PCI PERR */ +#define UIC_EIR0 0x00000008 /* External interrupt 0 */ +#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ +#define UIC_EIR1 0x00000002 /* External interrupt 1 */ +#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */ + +/* For compatibility with 405 code */ +#define UIC_MAL_SERR UIC_MS +#define UIC_MAL_TXDE UIC_MTDE +#define UIC_MAL_RXDE UIC_MRDE +#define UIC_ENET UIC_ETH0 + #elif !defined(CONFIG_440SPE) #define UIC_MS 0x80000000 /* MAL SERR */ #define UIC_MTDE 0x40000000 /* MAL TXDE */ @@ -1608,6 +1917,20 @@ #define UIC_RSVD29 0x00000004 /* Reserved */ #define UIC_RSVD30 0x00000002 /* Reserved */ #define UIC_RSVD31 0x00000001 /* Reserved */ + +#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */ + +#define UIC_EIR5 0x80000000 /* External interrupt 5 */ +#define UIC_EIR6 0x40000000 /* External interrupt 6 */ +#define UIC_OPB 0x20000000 /* OPB to PLB bridge interrupt stat */ +#define UIC_EIR2 0x10000000 /* External interrupt 2 */ +#define UIC_EIR3 0x08000000 /* External interrupt 3 */ +#define UIC_DDR2 0x04000000 /* DDR2 sdram */ +#define UIC_MCTX0 0x02000000 /* MAl intp coalescence TX0 */ +#define UIC_MCTX1 0x01000000 /* MAl intp coalescence TX1 */ +#define UIC_MCTR0 0x00800000 /* MAl intp coalescence TR0 */ +#define UIC_MCTR1 0x00400000 /* MAl intp coalescence TR1 */ + #endif /* CONFIG_440GX */ /*---------------------------------------------------------------------------+ @@ -1623,6 +1946,17 @@ #define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \ UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI) + +#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + +#define UICB0_UIC1CI 0x00000000 /* UIC1 Critical Interrupt */ +#define UICB0_UIC1NCI 0x00000000 /* UIC1 Noncritical Interrupt */ +#define UICB0_UIC2CI 0x00000000 /* UIC2 Critical Interrupt */ +#define UICB0_UIC2NCI 0x00000000 /* UIC2 Noncritical Interrupt */ + +#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \ + UICB0_UIC1CI | UICB0_UIC2NCI) + #endif /* CONFIG_440GX */ /*---------------------------------------------------------------------------+ | Universal interrupt controller interrupts @@ -2262,7 +2596,8 @@ #define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13) #define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15) #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 21) #define SDR0_SDSTP1_PAME_MASK (0x80000000 >> 27) #endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */ @@ -2390,11 +2725,81 @@ #define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */ #define SDR0_MFR_ERRATA3_EN0 0x00800000 #define SDR0_MFR_ERRATA3_EN1 0x00400000 +#if defined(CONFIG_440GX) /* test-only: only 440GX or 440SPE??? */ #define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */ #define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */ #define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */ #define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */ #define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */ +#endif + +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR0_PFC1_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<22) +#define SDR0_PFC1_EPS_DECODE(n) ((((unsigned long)(n))>>22)&0x07) +#define SDR0_PFC2_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<29) +#define SDR0_PFC2_EPS_DECODE(n) ((((unsigned long)(n))>>29)&0x07) +#endif + +#define SDR0_MFR_ECS_MASK 0x10000000 +#define SDR0_MFR_ECS_INTERNAL 0x10000000 + +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR0_SRST0 0x200 +#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */ +#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */ +#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */ +#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */ +#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/transmitter 0 */ +#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/transmitter 1 */ +#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */ +#define SDR0_SRST0_USB2H 0x01000000 /* USB2.0 Host */ +#define SDR0_SRST0_GPIO 0x00800000 /* General purpose I/O */ +#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */ +#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */ +#define SDR0_SRST0_PCI 0x00100000 /* PCI */ +#define SDR0_SRST0_EMAC0 0x00080000 /* Ethernet media access controller 0 */ +#define SDR0_SRST0_EMAC1 0x00040000 /* Ethernet media access controller 1 */ +#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */ +#define SDR0_SRST0_ZMII 0x00010000 /* ZMII bridge */ +#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0 */ +#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1 */ +#define SDR0_SRST0_IIC1 0x00002000 /* Inter integrated circuit 1 */ +#define SDR0_SRST0_SCP 0x00001000 /* Serial communications port */ +#define SDR0_SRST0_BGI 0x00000800 /* OPB to PLB bridge */ +#define SDR0_SRST0_DMA 0x00000400 /* Direct memory access controller */ +#define SDR0_SRST0_DMAC 0x00000200 /* DMA channel */ +#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */ +#define SDR0_SRST0_USB2D 0x00000080 /* USB2.0 device */ +#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */ +#define SDR0_SRST0_P4P3 0x00000010 /* PLB4 to PLB3 bridge */ +#define SDR0_SRST0_P3P4 0x00000008 /* PLB3 to PLB4 bridge */ +#define SDR0_SRST0_PLB3 0x00000004 /* PLB3 arbiter */ +#define SDR0_SRST0_UART2 0x00000002 /* Universal asynchronous receiver/transmitter 2 */ +#define SDR0_SRST0_UART3 0x00000001 /* Universal asynchronous receiver/transmitter 3 */ + +#define SDR0_SRST1 0x201 +#define SDR0_SRST1_NDFC 0x80000000 /* Nand flash controller */ +#define SDR0_SRST1_OPBA1 0x40000000 /* OPB Arbiter attached to PLB4 */ +#define SDR0_SRST1_P4OPB0 0x20000000 /* PLB4 to OPB Bridge0 */ +#define SDR0_SRST1_PLB42OPB0 SDR0_SRST1_P4OPB0 +#define SDR0_SRST1_DMA4 0x10000000 /* DMA to PLB4 */ +#define SDR0_SRST1_DMA4CH 0x08000000 /* DMA Channel to PLB4 */ +#define SDR0_SRST1_OPBA2 0x04000000 /* OPB Arbiter attached to PLB4 USB 2.0 Host */ +#define SDR0_SRST1_OPB2PLB40 0x02000000 /* OPB to PLB4 Bridge attached to USB 2.0 Host */ +#define SDR0_SRST1_PLB42OPB1 0x01000000 /* PLB4 to OPB Bridge attached to USB 2.0 Host */ +#define SDR0_SRST1_CPM1 0x00800000 /* Clock and Power management 1 */ +#define SDR0_SRST1_UIC2 0x00400000 /* Universal Interrupt Controller 2 */ +#define SDR0_SRST1_CRYP0 0x00200000 /* Security Engine */ +#define SDR0_SRST1_USB20PHY 0x00100000 /* USB 2.0 Phy */ +#define SDR0_SRST1_USB2HUTMI 0x00080000 /* USB 2.0 Host UTMI Interface */ +#define SDR0_SRST1_USB2HPHY 0x00040000 /* USB 2.0 Host Phy Interface */ +#define SDR0_SRST1_SRAM0 0x00020000 /* Internal SRAM Controller */ +#define SDR0_SRST1_RGMII0 0x00010000 /* RGMII Bridge */ +#define SDR0_SRST1_ETHPLL 0x00008000 /* Ethernet PLL */ +#define SDR0_SRST1_FPU 0x00004000 /* Floating Point Unit */ +#define SDR0_SRST1_KASU0 0x00002000 /* Kasumi Engine */ + +#else #define SDR0_SRST_BGO 0x80000000 #define SDR0_SRST_PLB 0x40000000 @@ -2427,10 +2832,15 @@ #define SDR0_SRST_EMAC3 0x00000008 #define SDR0_SRST_RGMII 0x00000001 +#endif + /*-----------------------------------------------------------------------------+ | Clocking +-----------------------------------------------------------------------------*/ -#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) +#if !defined (CONFIG_440GX) && \ + !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \ + !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \ + !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) #define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */ #define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */ #define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */ @@ -2498,6 +2908,120 @@ #define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */ #endif /* CONFIG_440GX */ +#if defined (CONFIG_440EPX) || defined (CONFIG_440GRX) +/*--------------------------------------*/ +#define CPR0_PLLC 0x40 +#define CPR0_PLLC_RST_MASK 0x80000000 +#define CPR0_PLLC_RST_PLLLOCKED 0x00000000 +#define CPR0_PLLC_RST_PLLRESET 0x80000000 +#define CPR0_PLLC_ENG_MASK 0x40000000 +#define CPR0_PLLC_ENG_DISABLE 0x00000000 +#define CPR0_PLLC_ENG_ENABLE 0x40000000 +#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30) +#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01) +#define CPR0_PLLC_SRC_MASK 0x20000000 +#define CPR0_PLLC_SRC_PLLOUTA 0x00000000 +#define CPR0_PLLC_SRC_PLLOUTB 0x20000000 +#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29) +#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01) +#define CPR0_PLLC_SEL_MASK 0x07000000 +#define CPR0_PLLC_SEL_PLL 0x00000000 +#define CPR0_PLLC_SEL_CPU 0x01000000 +#define CPR0_PLLC_SEL_PER 0x05000000 +#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07) +#define CPR0_PLLC_TUNE_MASK 0x000003FF +#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) +/*--------------------------------------*/ +#define CPR0_PLLD 0x60 +#define CPR0_PLLD_FBDV_MASK 0x1F000000 +#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1) +#define CPR0_PLLD_FWDVA_MASK 0x000F0000 +#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16) +#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1) +#define CPR0_PLLD_FWDVB_MASK 0x00000700 +#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8) +#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1) +#define CPR0_PLLD_LFBDV_MASK 0x0000003F +#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0) +#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1) +/*--------------------------------------*/ +#define CPR0_PRIMAD 0x80 +#define CPR0_PRIMAD_PRADV0_MASK 0x07000000 +#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1) +/*--------------------------------------*/ +#define CPR0_PRIMBD 0xA0 +#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000 +#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1) +/*--------------------------------------*/ +#if 0 +#define CPR0_CPM0_ER 0xB0 /* CPM Enable Register */ +#define CPR0_CPM0_FR 0xB1 /* CPM Force Register */ +#define CPR0_CPM0_SR 0xB2 /* CPM Status Register */ +#define CPR0_CPM0_IIC0 0x80000000 /* Inter-Intergrated Circuit0 */ +#define CPR0_CPM0_IIC1 0x40000000 /* Inter-Intergrated Circuit1 */ +#define CPR0_CPM0_PCI 0x20000000 /* Peripheral Component Interconnect */ +#define CPR0_CPM0_USB1H 0x08000000 /* USB1.1 Host */ +#define CPR0_CPM0_FPU 0x04000000 /* PPC440 FPU */ +#define CPR0_CPM0_CPU 0x02000000 /* PPC440x5 Processor Core */ +#define CPR0_CPM0_DMA 0x01000000 /* Direct Memory Access Controller */ +#define CPR0_CPM0_BGO 0x00800000 /* PLB to OPB Bridge */ +#define CPR0_CPM0_BGI 0x00400000 /* OPB to PLB Bridge */ +#define CPR0_CPM0_EBC 0x00200000 /* External Bus Controller */ +#define CPR0_CPM0_NDFC 0x00100000 /* Nand Flash Controller */ +#define CPR0_CPM0_MADMAL 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */ +#define CPR0_CPM0_DMC 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */ +#define CPR0_CPM0_PLB4 0x00040000 /* PLB4 Arbiter */ +#define CPR0_CPM0_PLB4x3x 0x00020000 /* PLB4 to PLB3 */ +#define CPR0_CPM0_PLB3x4x 0x00010000 /* PLB3 to PLB4 */ +#define CPR0_CPM0_PLB3 0x00008000 /* PLB3 Arbiter */ +#define CPR0_CPM0_PPM 0x00002000 /* PLB Performance Monitor */ +#define CPR0_CPM0_UIC1 0x00001000 /* Universal Interrupt Controller 1 */ +#define CPR0_CPM0_GPIO 0x00000800 /* General Purpose IO */ +#define CPR0_CPM0_GPT 0x00000400 /* General Purpose Timer */ +#define CPR0_CPM0_UART0 0x00000200 /* Universal Asynchronous Rcver/Xmitter 0 */ +#define CPR0_CPM0_UART1 0x00000100 /* Universal Asynchronous Rcver/Xmitter 1 */ +#define CPR0_CPM0_UIC0 0x00000080 /* Universal Interrupt Controller 0 */ +#define CPR0_CPM0_TMRCLK 0x00000040 /* CPU Timer */ +#define CPR0_CPM0_EMC0 0x00000020 /* Ethernet 0 */ +#define CPR0_CPM0_EMC1 0x00000010 /* Ethernet 1 */ +#define CPR0_CPM0_UART2 0x00000008 /* Universal Asynchronous Rcver/Xmitter 2 */ +#define CPR0_CPM0_UART3 0x00000004 /* Universal Asynchronous Rcver/Xmitter 3 */ +#define CPR0_CPM0_USB2D 0x00000002 /* USB2.0 Device */ +#define CPR0_CPM0_USB2H 0x00000001 /* USB2.0 Host */ +#endif +/*--------------------------------------*/ +#define CPR0_OPBD 0xC0 +#define CPR0_OPBD_OPBDV0_MASK 0x03000000 +#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) +/*--------------------------------------*/ +#define CPR0_PERD 0xE0 +#define CPR0_PERD_PERDV0_MASK 0x07000000 +#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1) +/*--------------------------------------*/ +#define CPR0_MALD 0x100 +#define CPR0_MALD_MALDV0_MASK 0x03000000 +#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) +/*--------------------------------------*/ +#define CPR0_SPCID 0x120 +#define CPR0_SPCID_SPCIDV0_MASK 0x03000000 +#define CPR0_SPCID_SPCIDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define CPR0_SPCID_SPCIDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) +/*--------------------------------------*/ +#define CPR0_ICFG 0x140 +#define CPR0_ICFG_RLI_MASK 0x80000000 +#define CPR0_ICFG_RLI_RESETCPR 0x00000000 +#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000 +#define CPR0_ICFG_ICS_MASK 0x00000007 +#endif /* defined (CONFIG_440EPX) || defined (CONFIG_440GRX) */ + /*----------------------------------------------------------------------------- | IIC Register Offsets '----------------------------------------------------------------------------*/ @@ -2539,7 +3063,8 @@ #define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000) #define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000) -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* PCI Local Configuration Registers --------------------------------- */ @@ -2625,6 +3150,33 @@ #endif /* !defined(CONFIG_440EP) !defined(CONFIG_440GR) */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + +/* USB2.0 Device */ +#define USB2D0_BASE CFG_USB2D0_BASE + +#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000) + +#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000) /* Interrupt register for Endpoint 0 plus IN Endpoints 1 to 3 */ +#define USB2D0_POWER (USB2D0_BASE + 0x00000000) /* Power management register */ +#define USB2D0_FADDR (USB2D0_BASE + 0x00000000) /* Function address register */ +#define USB2D0_INTRINE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRIN */ +#define USB2D0_INTROUT (USB2D0_BASE + 0x00000000) /* Interrupt register for OUT Endpoints 1 to 3 */ +#define USB2D0_INTRUSBE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRUSB */ +#define USB2D0_INTRUSB (USB2D0_BASE + 0x00000000) /* Interrupt register for common USB interrupts */ +#define USB2D0_INTROUTE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for IntrOut */ +#define USB2D0_TSTMODE (USB2D0_BASE + 0x00000000) /* Enables the USB 2.0 test modes */ +#define USB2D0_INDEX (USB2D0_BASE + 0x00000000) /* Index register for selecting the Endpoint status/control registers */ +#define USB2D0_FRAME (USB2D0_BASE + 0x00000000) /* Frame number */ +#define USB2D0_INCSR0 (USB2D0_BASE + 0x00000000) /* Control Status register for Endpoint 0. (Index register set to select Endpoint 0) */ +#define USB2D0_INCSR (USB2D0_BASE + 0x00000000) /* Control Status register for IN Endpoint. (Index register set to select Endpoints 13) */ +#define USB2D0_INMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet size for IN Endpoint. (Index register set to select Endpoints 13) */ +#define USB2D0_OUTCSR (USB2D0_BASE + 0x00000000) /* Control Status register for OUT Endpoint. (Index register set to select Endpoints 13) */ +#define USB2D0_OUTMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet size for OUT Endpoint. (Index register set to select Endpoints 13) */ +#define USB2D0_OUTCOUNT0 (USB2D0_BASE + 0x00000000) /* Number of received bytes in Endpoint 0 FIFO. (Index register set to select Endpoint 0) */ +#define USB2D0_OUTCOUNT (USB2D0_BASE + 0x00000000) /* Number of bytes in OUT Endpoint FIFO. (Index register set to select Endpoints 13) */ +#endif + /****************************************************************************** * GPIO macro register defines ******************************************************************************/ @@ -2640,7 +3192,8 @@ #define GPIO0_IR (GPIO0_BASE+0x1C) #endif /* CONFIG_440GP */ -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000B00) #define GPIO1_BASE (CFG_PERIPHERAL_BASE+0x00000C00) diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h index ec2e362..43c5ca4 100644 --- a/include/ppc4xx_enet.h +++ b/include/ppc4xx_enet.h @@ -145,12 +145,14 @@ typedef struct emac_4xx_hw_st { #define EMAC_STACR_OC_MASK (0x00000000) #endif -#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define SDR0_PFC1_EM_1000 (0x00200000) #endif /*ZMII Bridge Register addresses */ -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00) #else #define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780) @@ -163,6 +165,7 @@ typedef struct emac_4xx_hw_st { #define ZMII_MDI0 0x80000000 /* ZMII FER Register Bit Definitions */ +#define ZMII_FER_DIS (0x0) #define ZMII_FER_MDI (0x8) #define ZMII_FER_SMII (0x4) #define ZMII_FER_RMII (0x2) @@ -197,7 +200,11 @@ typedef struct emac_4xx_hw_st { #define ZMII_SMIISR_V(__x) ((3 - __x) * 8) /* RGMII Register Addresses */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x1000) +#else #define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x0790) +#endif #define RGMII_FER (RGMII_BASE + 0x00) #define RGMII_SSR (RGMII_BASE + 0x04) @@ -216,7 +223,11 @@ typedef struct emac_4xx_hw_st { #define RGMII_SSR_SP_100MBPS (0x02) #define RGMII_SSR_SP_1000MBPS (0x04) +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define RGMII_SSR_V(__x) ((__x) * 8) +#else #define RGMII_SSR_V(__x) ((__x -2) * 8) +#endif /*---------------------------------------------------------------------------+ @@ -286,7 +297,8 @@ typedef struct emac_4xx_hw_st { /* Ethernet MAC Regsiter Addresses */ #if defined(CONFIG_440) -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00) #else #define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800) @@ -332,7 +344,9 @@ typedef struct emac_4xx_hw_st { #define EMAC_M0_WKE (0x04000000) /* on 440GX EMAC_MR1 has a different layout! */ -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* MODE Reg 1 */ #define EMAC_M1_FDE (0x80000000) #define EMAC_M1_ILE (0x40000000) diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index 72d690e..3e47e82 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -312,7 +312,7 @@ label: \ lwz r3,GOT(transfer_to_handler); \ mtlr r3; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ - li r20,MSR_KERNEL; \ + li r20,(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \ rlwimi r20,r23,0,25,25; \ blrl ; \ .L_ ## label : \ diff --git a/include/serial.h b/include/serial.h index 8c7b1c2..4880059 100644 --- a/include/serial.h +++ b/include/serial.h @@ -26,6 +26,13 @@ extern struct serial_device * default_serial_console (void); || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx) extern struct serial_device serial0_device; extern struct serial_device serial1_device; +#if defined(CFG_NS16550_SERIAL) +extern struct serial_device eserial1_device; +extern struct serial_device eserial2_device; +extern struct serial_device eserial3_device; +extern struct serial_device eserial4_device; +#endif /* CFG_NS16550_SERIAL */ + #endif diff --git a/include/status_led.h b/include/status_led.h index a56883b..db4c60f 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -346,6 +346,15 @@ void status_led_set (int led, int state); #elif defined(CONFIG_NIOS2) /* XXX empty just to avoid the error */ /************************************************************************/ +#elif defined(CONFIG_V38B) + +# define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */ +# define STATUS_LED_PERIOD (CFG_HZ / 2) +# define STATUS_LED_STATE STATUS_LED_BLINKING + +# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ +# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ + #else # error Status LED configuration missing #endif |