diff options
Diffstat (limited to 'include')
50 files changed, 2514 insertions, 391 deletions
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h index ebcdcfe..2b3eb90 100644 --- a/include/asm-arm/arch-davinci/hardware.h +++ b/include/asm-arm/arch-davinci/hardware.h @@ -150,6 +150,8 @@ typedef volatile unsigned int * dv_reg_p; #define VDD3P3V_PWDN (0x01c40048) #define UART0_PWREMU_MGMT (0x01c20030) +#define UART1_PWREMU_MGMT (0x01c20430) +#define UART2_PWREMU_MGMT (0x01c20830) #define PSC_SILVER_BULLET (0x01c41a20) diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h new file mode 100644 index 0000000..2f0d809 --- /dev/null +++ b/include/asm-arm/arch-mx31/mx31-regs.h @@ -0,0 +1,151 @@ +/* + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MX31_REGS_H +#define __ASM_ARCH_MX31_REGS_H + +#define __REG(x) (*((volatile u32 *)(x))) +#define __REG16(x) (*((volatile u16 *)(x))) +#define __REG8(x) (*((volatile u8 *)(x))) + +#define CCM_BASE 0x53f80000 +#define CCM_CCMR (CCM_BASE + 0x00) +#define CCM_PDR0 (CCM_BASE + 0x04) +#define CCM_PDR1 (CCM_BASE + 0x08) +#define CCM_RCSR (CCM_BASE + 0x0c) +#define CCM_MPCTL (CCM_BASE + 0x10) +#define CCM_UPCTL (CCM_BASE + 0x10) +#define CCM_SPCTL (CCM_BASE + 0x18) +#define CCM_COSR (CCM_BASE + 0x1C) + +#define CCMR_MDS (1 << 7) +#define CCMR_SBYCS (1 << 4) +#define CCMR_MPE (1 << 3) +#define CCMR_PRCS_MASK (3 << 1) +#define CCMR_FPM (1 << 1) +#define CCMR_CKIH (2 << 1) + +#define PDR0_CSI_PODF(x) (((x) & 0x1ff) << 23) +#define PDR0_PER_PODF(x) (((x) & 0x1f) << 16) +#define PDR0_HSP_PODF(x) (((x) & 0x7) << 11) +#define PDR0_NFC_PODF(x) (((x) & 0x7) << 8) +#define PDR0_IPG_PODF(x) (((x) & 0x3) << 6) +#define PDR0_MAX_PODF(x) (((x) & 0x7) << 3) +#define PDR0_MCU_PODF(x) ((x) & 0x7) + +#define PLL_PD(x) (((x) & 0xf) << 26) +#define PLL_MFD(x) (((x) & 0x3ff) << 16) +#define PLL_MFI(x) (((x) & 0xf) << 10) +#define PLL_MFN(x) (((x) & 0x3ff) << 0) + +#define WEIM_BASE 0xb8002000 +#define CSCR_U(x) (WEIM_BASE + (x) * 0x10) +#define CSCR_L(x) (WEIM_BASE + 4 + (x) * 0x10) +#define CSCR_A(x) (WEIM_BASE + 8 + (x) * 0x10) + +#define IOMUXC_BASE 0x43FAC000 +#define IOMUXC_GPR (IOMUXC_BASE + 0x8) +#define IOMUXC_SW_MUX_CTL(x) (IOMUXC_BASE + 0xc + (x) * 4) +#define IOMUXC_SW_PAD_CTL(x) (IOMUXC_BASE + 0x154 + (x) * 4) + +#define IPU_BASE 0x53fc0000 +#define IPU_CONF IPU_BASE + +#define IPU_CONF_PXL_ENDIAN (1<<8) +#define IPU_CONF_DU_EN (1<<7) +#define IPU_CONF_DI_EN (1<<6) +#define IPU_CONF_ADC_EN (1<<5) +#define IPU_CONF_SDC_EN (1<<4) +#define IPU_CONF_PF_EN (1<<3) +#define IPU_CONF_ROT_EN (1<<2) +#define IPU_CONF_IC_EN (1<<1) +#define IPU_CONF_SCI_EN (1<<0) + +#define WDOG_BASE 0x53FDC000 + +/* + * Signal Multiplexing (IOMUX) + */ + +/* bits in the SW_MUX_CTL registers */ +#define MUX_CTL_OUT_GPIO_DR (0 << 4) +#define MUX_CTL_OUT_FUNC (1 << 4) +#define MUX_CTL_OUT_ALT1 (2 << 4) +#define MUX_CTL_OUT_ALT2 (3 << 4) +#define MUX_CTL_OUT_ALT3 (4 << 4) +#define MUX_CTL_OUT_ALT4 (5 << 4) +#define MUX_CTL_OUT_ALT5 (6 << 4) +#define MUX_CTL_OUT_ALT6 (7 << 4) +#define MUX_CTL_IN_NONE (0 << 0) +#define MUX_CTL_IN_GPIO (1 << 0) +#define MUX_CTL_IN_FUNC (2 << 0) +#define MUX_CTL_IN_ALT1 (4 << 0) +#define MUX_CTL_IN_ALT2 (8 << 0) + +#define MUX_CTL_FUNC (MUX_CTL_OUT_FUNC | MUX_CTL_IN_FUNC) +#define MUX_CTL_ALT1 (MUX_CTL_OUT_ALT1 | MUX_CTL_IN_ALT1) +#define MUX_CTL_ALT2 (MUX_CTL_OUT_ALT2 | MUX_CTL_IN_ALT2) +#define MUX_CTL_GPIO (MUX_CTL_OUT_GPIO_DR | MUX_CTL_IN_GPIO) + +/* Register offsets based on IOMUXC_BASE */ +/* 0x00 .. 0x7b */ +#define MUX_CTL_RTS1 0x7c +#define MUX_CTL_CTS1 0x7d +#define MUX_CTL_DTR_DCE1 0x7e +#define MUX_CTL_DSR_DCE1 0x7f +#define MUX_CTL_CSPI2_SCLK 0x80 +#define MUX_CTL_CSPI2_SPI_RDY 0x81 +#define MUX_CTL_RXD1 0x82 +#define MUX_CTL_TXD1 0x83 +#define MUX_CTL_CSPI2_MISO 0x84 +/* 0x85 .. 0x8a */ +#define MUX_CTL_CSPI2_MOSI 0x8b + +/* The modes a specific pin can be in + * these macros can be used in mx31_gpio_mux() and have the form + * MUX_[contact name]__[pin function] + */ +#define MUX_RXD1__UART1_RXD_MUX ((MUX_CTL_FUNC << 8) | MUX_CTL_RXD1) +#define MUX_TXD1__UART1_TXD_MUX ((MUX_CTL_FUNC << 8) | MUX_CTL_TXD1) +#define MUX_RTS1__UART1_RTS_B ((MUX_CTL_FUNC << 8) | MUX_CTL_RTS1) +#define MUX_RTS1__UART1_CTS_B ((MUX_CTL_FUNC << 8) | MUX_CTL_CTS1) + +#define MUX_CSPI2_MOSI__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MOSI) +#define MUX_CSPI2_MISO__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO) + +/* + * Memory regions and CS + */ +#define IPU_MEM_BASE 0x70000000 +#define CSD0_BASE 0x80000000 +#define CSD1_BASE 0x90000000 +#define CS0_BASE 0xA0000000 +#define CS1_BASE 0xA8000000 +#define CS2_BASE 0xB0000000 +#define CS3_BASE 0xB2000000 +#define CS4_BASE 0xB4000000 +#define CS4_PSRAM_BASE 0xB5000000 +#define CS5_BASE 0xB6000000 +#define PCMCIA_MEM_BASE 0xC0000000 + +#endif /* __ASM_ARCH_MX31_REGS_H */ diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h new file mode 100644 index 0000000..f89a401 --- /dev/null +++ b/include/asm-arm/arch-mx31/mx31.h @@ -0,0 +1,32 @@ +/* + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MX31_H +#define __ASM_ARCH_MX31_H + +u32 mx31_get_mpl_dpdgck_clk(void); +u32 mx31_get_mcu_main_clk(void); +u32 mx31_get_ipg_clk(void); +void mx31_gpio_mux(unsigned long mode); + +#endif /* __ASM_ARCH_MX31_H */ diff --git a/include/asm-arm/arch-arm1136/bits.h b/include/asm-arm/arch-omap24xx/bits.h index 8522335..8522335 100644 --- a/include/asm-arm/arch-arm1136/bits.h +++ b/include/asm-arm/arch-omap24xx/bits.h diff --git a/include/asm-arm/arch-arm1136/clocks.h b/include/asm-arm/arch-omap24xx/clocks.h index 2a95af1..2a95af1 100644 --- a/include/asm-arm/arch-arm1136/clocks.h +++ b/include/asm-arm/arch-omap24xx/clocks.h diff --git a/include/asm-arm/arch-arm1136/i2c.h b/include/asm-arm/arch-omap24xx/i2c.h index 7248950..7248950 100644 --- a/include/asm-arm/arch-arm1136/i2c.h +++ b/include/asm-arm/arch-omap24xx/i2c.h diff --git a/include/asm-arm/arch-arm1136/mem.h b/include/asm-arm/arch-omap24xx/mem.h index c81f1c4..c81f1c4 100644 --- a/include/asm-arm/arch-arm1136/mem.h +++ b/include/asm-arm/arch-omap24xx/mem.h diff --git a/include/asm-arm/arch-arm1136/mux.h b/include/asm-arm/arch-omap24xx/mux.h index 4fdb9c6..4fdb9c6 100644 --- a/include/asm-arm/arch-arm1136/mux.h +++ b/include/asm-arm/arch-omap24xx/mux.h diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-omap24xx/omap2420.h index 0c11bec..0c11bec 100644 --- a/include/asm-arm/arch-arm1136/omap2420.h +++ b/include/asm-arm/arch-omap24xx/omap2420.h diff --git a/include/asm-arm/arch-arm1136/sizes.h b/include/asm-arm/arch-omap24xx/sizes.h index aaba18f..aaba18f 100644 --- a/include/asm-arm/arch-arm1136/sizes.h +++ b/include/asm-arm/arch-omap24xx/sizes.h diff --git a/include/asm-arm/arch-arm1136/sys_info.h b/include/asm-arm/arch-omap24xx/sys_info.h index 53c231a..53c231a 100644 --- a/include/asm-arm/arch-arm1136/sys_info.h +++ b/include/asm-arm/arch-omap24xx/sys_info.h diff --git a/include/asm-arm/arch-arm1136/sys_proto.h b/include/asm-arm/arch-omap24xx/sys_proto.h index 9d8e5b2..9d8e5b2 100644 --- a/include/asm-arm/arch-arm1136/sys_proto.h +++ b/include/asm-arm/arch-omap24xx/sys_proto.h diff --git a/include/asm-blackfin/blackfin-config-post.h b/include/asm-blackfin/blackfin-config-post.h index 4422225..6a1ffa1 100644 --- a/include/asm-blackfin/blackfin-config-post.h +++ b/include/asm-blackfin/blackfin-config-post.h @@ -14,9 +14,9 @@ # error Memory Map does not fit into configuration #endif -/* Sanity check BFIN_CPU */ -#ifndef BFIN_CPU -# error BFIN_CPU: your board config needs to define this +/* Sanity check CONFIG_BFIN_CPU */ +#ifndef CONFIG_BFIN_CPU +# error CONFIG_BFIN_CPU: your board config needs to define this #endif /* Make sure the structure is properly aligned */ diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index b43dba3..9ccf7d6 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -74,7 +74,6 @@ typedef struct global_data { u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; - u32 ddr_clk; u32 pci_clk; #if defined(CONFIG_MPC837X) u32 pciexp1_clk; @@ -84,7 +83,7 @@ typedef struct global_data { u32 sata_clk; #endif #if defined(CONFIG_MPC8360) - u32 ddr_sec_clk; + u32 mem_sec_clk; #endif /* CONFIG_MPC8360 */ #endif #if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h new file mode 100644 index 0000000..67474c7 --- /dev/null +++ b/include/asm-sh/cache.h @@ -0,0 +1,35 @@ +#ifndef __ASM_SH_CACHE_H +#define __ASM_SH_CACHE_H + +#if defined(CONFIG_SH4) || defined(CONFIG_SH4A) + +#define L1_CACHE_BYTES 32 +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct *)(x)) + +void dcache_wback_range(u32 start, u32 end) +{ + u32 v; + + start &= ~(L1_CACHE_BYTES-1); + for (v = start; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbwb %0" + : /* no output */ + : "m" (__m(v))); + } +} + +void dcache_invalid_range(u32 start, u32 end) +{ + u32 v; + + start &= ~(L1_CACHE_BYTES-1); + for (v = start; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbi %0" + : /* no output */ + : "m" (__m(v))); + } +} +#endif /* CONFIG_SH4 || CONFIG_SH4A */ + +#endif /* __ASM_SH_CACHE_H */ diff --git a/include/asm-sh/cpu_sh4.h b/include/asm-sh/cpu_sh4.h index 2658039..c200ba5 100644 --- a/include/asm-sh/cpu_sh4.h +++ b/include/asm-sh/cpu_sh4.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) Copyright 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -30,12 +30,15 @@ #define CACHE_OC_NUM_ENTRIES 512 #define CACHE_OC_ENTRY_SHIFT 5 -#if defined (CONFIG_CPU_SH7750) -#include <asm/cpu_sh7750.h> +#if defined (CONFIG_CPU_SH7750) || \ + defined(CONFIG_CPU_SH7751) +# include <asm/cpu_sh7750.h> #elif defined (CONFIG_CPU_SH7722) -#include <asm/cpu_sh7722.h> +# include <asm/cpu_sh7722.h> +#elif defined (CONFIG_CPU_SH7780) +# include <asm/cpu_sh7780.h> #else -#error "Unknown SH4 variant" +# error "Unknown SH4 variant" #endif #endif /* _ASM_CPU_SH4_H_ */ diff --git a/include/asm-sh/cpu_sh7720.h b/include/asm-sh/cpu_sh7720.h index bafb8de..1b393b8 100644 --- a/include/asm-sh/cpu_sh7720.h +++ b/include/asm-sh/cpu_sh7720.h @@ -1,5 +1,9 @@ /* - * (C) Copyright 2007 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * Copyright 2007 (C) + * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * Copyright 2008 (C) + * Mark Jonas <mark.jonas@de.bosch.com> * * SH7720 Internal I/O register * @@ -201,6 +205,25 @@ #define PSELD (PFC_BASE + 0x2A) /* I/O Port */ +#define PORT_BASE 0xA4050100 +#define PADR (PORT_BASE + 0x40) +#define PBDR (PORT_BASE + 0x42) +#define PCDR (PORT_BASE + 0x44) +#define PDDR (PORT_BASE + 0x46) +#define PEDR (PORT_BASE + 0x48) +#define PFDR (PORT_BASE + 0x4A) +#define PGDR (PORT_BASE + 0x4C) +#define PHDR (PORT_BASE + 0x4E) +#define PJDR (PORT_BASE + 0x50) +#define PKDR (PORT_BASE + 0x52) +#define PLDR (PORT_BASE + 0x54) +#define PMDR (PORT_BASE + 0x56) +#define PPDR (PORT_BASE + 0x58) +#define PRDR (PORT_BASE + 0x5A) +#define PSDR (PORT_BASE + 0x5C) +#define PTDR (PORT_BASE + 0x5E) +#define PUDR (PORT_BASE + 0x60) +#define PVDR (PORT_BASE + 0x62) /* H-UDI */ diff --git a/include/asm-sh/cpu_sh7750.h b/include/asm-sh/cpu_sh7750.h index bb6461a..3c3c309 100644 --- a/include/asm-sh/cpu_sh7750.h +++ b/include/asm-sh/cpu_sh7750.h @@ -25,10 +25,10 @@ #ifdef CONFIG_CPU_TYPE_R #define CACHE_OC_NUM_WAYS 2 -#define CCR_CACHE_INIT 0x8000090d /* EMODE,ICI,ICE(16k),OCI,P1-wb,OCE(32k) */ +#define CCR_CACHE_INIT 0x8000090D /* EMODE,ICI,ICE(16k),OCI,P1-wb,OCE(32k) */ #else #define CACHE_OC_NUM_WAYS 1 -#define CCR_CACHE_INIT 0x0000090b +#define CCR_CACHE_INIT 0x0000090B #endif /* OCN */ diff --git a/include/asm-sh/cpu_sh7780.h b/include/asm-sh/cpu_sh7780.h new file mode 100644 index 0000000..d4f824e --- /dev/null +++ b/include/asm-sh/cpu_sh7780.h @@ -0,0 +1,503 @@ +#ifndef _ASM_CPU_SH7780_H_ +#define _ASM_CPU_SH7780_H_ + +/* + * Copyright (c) 2007,2008 Nobuhiro Iwamatsu + * Copyright (c) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#define CACHE_OC_NUM_WAYS 1 +#define CCR_CACHE_INIT 0x0000090b + +/* Exceptions */ +#define TRA 0xFF000020 +#define EXPEVT 0xFF000024 +#define INTEVT 0xFF000028 + +/* Memory Management Unit */ +#define PTEH 0xFF000000 +#define PTEL 0xFF000004 +#define TTB 0xFF000008 +#define TEA 0xFF00000C +#define MMUCR 0xFF000010 +#define PASCR 0xFF000070 +#define IRMCR 0xFF000078 + +/* Cache Controller */ +#define CCR 0xFF00001C +#define QACR0 0xFF000038 +#define QACR1 0xFF00003C +#define RAMCR 0xFF000074 + +/* L Memory */ +#define RAMCR 0xFF000074 +#define LSA0 0xFF000050 +#define LSA1 0xFF000054 +#define LDA0 0xFF000058 +#define LDA1 0xFF00005C + +/* Interrupt Controller */ +#define ICR0 0xFFD00000 +#define ICR1 0xFFD0001C +#define INTPRI 0xFFD00010 +#define INTREQ 0xFFD00024 +#define INTMSK0 0xFFD00044 +#define INTMSK1 0xFFD00048 +#define INTMSK2 0xFFD40080 +#define INTMSKCLR0 0xFFD00064 +#define INTMSKCLR1 0xFFD00068 +#define INTMSKCLR2 0xFFD40084 +#define NMIFCR 0xFFD000C0 +#define USERIMASK 0xFFD30000 +#define INT2PRI0 0xFFD40000 +#define INT2PRI1 0xFFD40004 +#define INT2PRI2 0xFFD40008 +#define INT2PRI3 0xFFD4000C +#define INT2PRI4 0xFFD40010 +#define INT2PRI5 0xFFD40014 +#define INT2PRI6 0xFFD40018 +#define INT2PRI7 0xFFD4001C +#define INT2A0 0xFFD40030 +#define INT2A1 0xFFD40034 +#define INT2MSKR 0xFFD40038 +#define INT2MSKCR 0xFFD4003C +#define INT2B0 0xFFD40040 +#define INT2B1 0xFFD40044 +#define INT2B2 0xFFD40048 +#define INT2B3 0xFFD4004C +#define INT2B4 0xFFD40050 +#define INT2B5 0xFFD40054 +#define INT2B6 0xFFD40058 +#define INT2B7 0xFFD4005C +#define INT2GPIC 0xFFD40090 + +/* local Bus State Controller */ +#define MMSELR 0xFF400020 +#define BCR 0xFF801000 +#define CS0BCR 0xFF802000 +#define CS1BCR 0xFF802010 +#define CS2BCR 0xFF802020 +#define CS4BCR 0xFF802040 +#define CS5BCR 0xFF802050 +#define CS6BCR 0xFF802060 +#define CS0WCR 0xFF802008 +#define CS1WCR 0xFF802018 +#define CS2WCR 0xFF802028 +#define CS4WCR 0xFF802048 +#define CS5WCR 0xFF802058 +#define CS6WCR 0xFF802068 +#define CS5PCR 0xFF802070 +#define CS6PCR 0xFF802080 + +/* DDR-SDRAM I/F */ +#define MIM_1 0xFE800008 +#define MIM_2 0xFE80000C +#define SCR_1 0xFE800010 +#define SCR_2 0xFE800014 +#define STR_1 0xFE800018 +#define STR_2 0xFE80001C +#define SDR_1 0xFE800030 +#define SDR_2 0xFE800034 +#define DBK_1 0xFE800400 +#define DBK_2 0xFE800404 + +/* PCI Controller */ +#define SH7780_PCIECR 0xFE000008 +#define SH7780_PCIVID 0xFE040000 +#define SH7780_PCIDID 0xFE040002 +#define SH7780_PCICMD 0xFE040004 +#define SH7780_PCISTATUS 0xFE040006 +#define SH7780_PCIRID 0xFE040008 +#define SH7780_PCIPIF 0xFE040009 +#define SH7780_PCISUB 0xFE04000A +#define SH7780_PCIBCC 0xFE04000B +#define SH7780_PCICLS 0xFE04000C +#define SH7780_PCILTM 0xFE04000D +#define SH7780_PCIHDR 0xFE04000E +#define SH7780_PCIBIST 0xFE04000F +#define SH7780_PCIIBAR 0xFE040010 +#define SH7780_PCIMBAR0 0xFE040014 +#define SH7780_PCIMBAR1 0xFE040018 +#define SH7780_PCISVID 0xFE04002C +#define SH7780_PCISID 0xFE04002E +#define SH7780_PCICP 0xFE040034 +#define SH7780_PCIINTLINE 0xFE04003C +#define SH7780_PCIINTPIN 0xFE04003D +#define SH7780_PCIMINGNT 0xFE04003E +#define SH7780_PCIMAXLAT 0xFE04003F +#define SH7780_PCICID 0xFE040040 +#define SH7780_PCINIP 0xFE040041 +#define SH7780_PCIPMC 0xFE040042 +#define SH7780_PCIPMCSR 0xFE040044 +#define SH7780_PCIPMCSRBSE 0xFE040046 +#define SH7780_PCI_CDD 0xFE040047 +#define SH7780_PCICR 0xFE040100 +#define SH7780_PCILSR0 0xFE040104 +#define SH7780_PCILSR1 0xFE040108 +#define SH7780_PCILAR0 0xFE04010C +#define SH7780_PCILAR1 0xFE040110 +#define SH7780_PCIIR 0xFE040114 +#define SH7780_PCIIMR 0xFE040118 +#define SH7780_PCIAIR 0xFE04011C +#define SH7780_PCICIR 0xFE040120 +#define SH7780_PCIAINT 0xFE040130 +#define SH7780_PCIAINTM 0xFE040134 +#define SH7780_PCIBMIR 0xFE040138 +#define SH7780_PCIPAR 0xFE0401C0 +#define SH7780_PCIPINT 0xFE0401CC +#define SH7780_PCIPINTM 0xFE0401D0 +#define SH7780_PCIMBR0 0xFE0401E0 +#define SH7780_PCIMBMR0 0xFE0401E4 +#define SH7780_PCIMBR1 0xFE0401E8 +#define SH7780_PCIMBMR1 0xFE0401EC +#define SH7780_PCIMBR2 0xFE0401F0 +#define SH7780_PCIMBMR2 0xFE0401F4 +#define SH7780_PCIIOBR 0xFE0401F8 +#define SH7780_PCIIOBMR 0xFE0401FC +#define SH7780_PCICSCR0 0xFE040210 +#define SH7780_PCICSCR1 0xFE040214 +#define SH7780_PCICSAR0 0xFE040218 +#define SH7780_PCICSAR1 0xFE04021C +#define SH7780_PCIPDR 0xFE040220 + +/* DMAC */ +#define DMAC_SAR0 0xFC808020 +#define DMAC_DAR0 0xFC808024 +#define DMAC_TCR0 0xFC808028 +#define DMAC_CHCR0 0xFC80802C +#define DMAC_SAR1 0xFC808030 +#define DMAC_DAR1 0xFC808034 +#define DMAC_TCR1 0xFC808038 +#define DMAC_CHCR1 0xFC80803C +#define DMAC_SAR2 0xFC808040 +#define DMAC_DAR2 0xFC808044 +#define DMAC_TCR2 0xFC808048 +#define DMAC_CHCR2 0xFC80804C +#define DMAC_SAR3 0xFC808050 +#define DMAC_DAR3 0xFC808054 +#define DMAC_TCR3 0xFC808058 +#define DMAC_CHCR3 0xFC80805C +#define DMAC_DMAOR0 0xFC808060 +#define DMAC_SAR4 0xFC808070 +#define DMAC_DAR4 0xFC808074 +#define DMAC_TCR4 0xFC808078 +#define DMAC_CHCR4 0xFC80807C +#define DMAC_SAR5 0xFC808080 +#define DMAC_DAR5 0xFC808084 +#define DMAC_TCR5 0xFC808088 +#define DMAC_CHCR5 0xFC80808C +#define DMAC_SARB0 0xFC808120 +#define DMAC_DARB0 0xFC808124 +#define DMAC_TCRB0 0xFC808128 +#define DMAC_SARB1 0xFC808130 +#define DMAC_DARB1 0xFC808134 +#define DMAC_TCRB1 0xFC808138 +#define DMAC_SARB2 0xFC808140 +#define DMAC_DARB2 0xFC808144 +#define DMAC_TCRB2 0xFC808148 +#define DMAC_SARB3 0xFC808150 +#define DMAC_DARB3 0xFC808154 +#define DMAC_TCRB3 0xFC808158 +#define DMAC_DMARS0 0xFC809000 +#define DMAC_DMARS1 0xFC809004 +#define DMAC_DMARS2 0xFC809008 +#define DMAC_SAR6 0xFC818020 +#define DMAC_DAR6 0xFC818024 +#define DMAC_TCR6 0xFC818028 +#define DMAC_CHCR6 0xFC81802C +#define DMAC_SAR7 0xFC818030 +#define DMAC_DAR7 0xFC818034 +#define DMAC_TCR7 0xFC818038 +#define DMAC_CHCR7 0xFC81803C +#define DMAC_SAR8 0xFC818040 +#define DMAC_DAR8 0xFC818044 +#define DMAC_TCR8 0xFC818048 +#define DMAC_CHCR8 0xFC81804C +#define DMAC_SAR9 0xFC818050 +#define DMAC_DAR9 0xFC818054 +#define DMAC_TCR9 0xFC818058 +#define DMAC_CHCR9 0xFC81805C +#define DMAC_DMAOR1 0xFC818060 +#define DMAC_SAR10 0xFC818070 +#define DMAC_DAR10 0xFC818074 +#define DMAC_TCR10 0xFC818078 +#define DMAC_CHCR10 0xFC81807C +#define DMAC_SAR11 0xFC818080 +#define DMAC_DAR11 0xFC818084 +#define DMAC_TCR11 0xFC818088 +#define DMAC_CHCR11 0xFC81808C +#define DMAC_SARB6 0xFC818120 +#define DMAC_DARB6 0xFC818124 +#define DMAC_TCRB6 0xFC818128 +#define DMAC_SARB7 0xFC818130 +#define DMAC_DARB7 0xFC818134 +#define DMAC_TCRB7 0xFC818138 +#define DMAC_SARB8 0xFC818140 +#define DMAC_DARB8 0xFC818144 +#define DMAC_TCRB8 0xFC818148 +#define DMAC_SARB9 0xFC818150 +#define DMAC_DARB9 0xFC818154 +#define DMAC_TCRB9 0xFC818158 + +/* Clock Pulse Generator */ +#define FRQCR 0xFFC80000 +#define PLLCR 0xFFC80024 +#define MSTPCR 0xFFC80030 + +/* Watchdog Timer and Reset */ +#define WTCNT WDTCNT +#define WDTST 0xFFCC0000 +#define WDTCSR 0xFFCC0004 +#define WDTBST 0xFFCC0008 +#define WDTCNT 0xFFCC0010 +#define WDTBCNT 0xFFCC0018 + +/* System Control */ +#define MSTPCR 0xFFC80030 + +/* Timer Unit */ +#define TSTR TSTR0 +#define TOCR 0xFFD80000 +#define TSTR0 0xFFD80004 +#define TCOR0 0xFFD80008 +#define TCNT0 0xFFD8000C +#define TCR0 0xFFD80010 +#define TCOR1 0xFFD80014 +#define TCNT1 0xFFD80018 +#define TCR1 0xFFD8001C +#define TCOR2 0xFFD80020 +#define TCNT2 0xFFD80024 +#define TCR2 0xFFD80028 +#define TCPR2 0xFFD8002C +#define TSTR1 0xFFDC0004 +#define TCOR3 0xFFDC0008 +#define TCNT3 0xFFDC000C +#define TCR3 0xFFDC0010 +#define TCOR4 0xFFDC0014 +#define TCNT4 0xFFDC0018 +#define TCR4 0xFFDC001C +#define TCOR5 0xFFDC0020 +#define TCNT5 0xFFDC0024 +#define TCR5 0xFFDC0028 + +/* Timer/Counter */ +#define CMTCFG 0xFFE30000 +#define CMTFRT 0xFFE30004 +#define CMTCTL 0xFFE30008 +#define CMTIRQS 0xFFE3000C +#define CMTCH0T 0xFFE30010 +#define CMTCH0ST 0xFFE30020 +#define CMTCH0C 0xFFE30030 +#define CMTCH1T 0xFFE30014 +#define CMTCH1ST 0xFFE30024 +#define CMTCH1C 0xFFE30034 +#define CMTCH2T 0xFFE30018 +#define CMTCH2C 0xFFE30038 +#define CMTCH3T 0xFFE3001C +#define CMTCH3C 0xFFE3003C + +/* Realtime Clock */ +#define R64CNT 0xFFE80000 +#define RSECCNT 0xFFE80004 +#define RMINCNT 0xFFE80008 +#define RHRCNT 0xFFE8000C +#define RWKCNT 0xFFE80010 +#define RDAYCNT 0xFFE80014 +#define RMONCNT 0xFFE80018 +#define RYRCNT 0xFFE8001C +#define RSECAR 0xFFE80020 +#define RMINAR 0xFFE80024 +#define RHRAR 0xFFE80028 +#define RWKAR 0xFFE8002C +#define RDAYAR 0xFFE80030 +#define RMONAR 0xFFE80034 +#define RCR1 0xFFE80038 +#define RCR2 0xFFE8003C +#define RCR3 0xFFE80050 +#define RYRAR 0xFFE80054 + +/* Serial Communication Interface with FIFO */ +#define SCIF0_BASE SCSMR0 +#define SCSMR0 0xFFE00000 +#define SCBRR0 0xFFE00004 +#define SCSCR0 0xFFE00008 +#define SCFSR0 0xFFE00010 +#define SCFCR0 0xFFE00018 +#define SCTFDR0 0xFFE0001C +#define SCRFDR0 0xFFE00020 +#define SCSPTR0 0xFFE00024 +#define SCLSR0 0xFFE00028 +#define SCRER0 0xFFE0002C +#define SCSMR1 0xFFE10000 +#define SCBRR1 0xFFE10004 +#define SCSCR1 0xFFE10008 +#define SCFSR1 0xFFE10010 +#define SCFCR1 0xFFE10018 +#define SCTFDR1 0xFFE1001C +#define SCRFDR1 0xFFE10020 +#define SCSPTR1 0xFFE10024 +#define SCLSR1 0xFFE10028 +#define SCRER1 0xFFE1002C + +/* Serial I/O with FIFO */ +#define SIMDR 0xFFE20000 +#define SISCR 0xFFE20002 +#define SITDAR 0xFFE20004 +#define SIRDAR 0xFFE20006 +#define SICDAR 0xFFE20008 +#define SICTR 0xFFE2000C +#define SIFCTR 0xFFE20010 +#define SISTR 0xFFE20014 +#define SIIER 0xFFE20016 +#define SITCR 0xFFE20028 +#define SIRCR 0xFFE2002C +#define SPICR 0xFFE20030 + +/* Serial Protocol Interface */ +#define SPCR 0xFFE50000 +#define SPSR 0xFFE50004 +#define SPSCR 0xFFE50008 +#define SPTBR 0xFFE5000C +#define SPRBR 0xFFE50010 + +/* Multimedia Card Interface */ +#define CMDR0 0xFFE60000 +#define CMDR1 0xFFE60001 +#define CMDR2 0xFFE60002 +#define CMDR3 0xFFE60003 +#define CMDR4 0xFFE60004 +#define CMDR5 0xFFE60005 +#define CMDSTRT 0xFFE60006 +#define OPCR 0xFFE6000A +#define CSTR 0xFFE6000B +#define INTCR0 0xFFE6000C +#define INTCR1 0xFFE6000D +#define INTSTR0 0xFFE6000E +#define INTSTR1 0xFFE6000F +#define CLKON 0xFFE60010 +#define CTOCR 0xFFE60011 +#define TBCR 0xFFE60014 +#define MODER 0xFFE60016 +#define CMDTYR 0xFFE60018 +#define RSPTYR 0xFFE60019 +#define TBNCR 0xFFE6001A +#define RSPR0 0xFFE60020 +#define RSPR1 0xFFE60021 +#define RSPR2 0xFFE60022 +#define RSPR3 0xFFE60023 +#define RSPR4 0xFFE60024 +#define RSPR5 0xFFE60025 +#define RSPR6 0xFFE60026 +#define RSPR7 0xFFE60027 +#define RSPR8 0xFFE60028 +#define RSPR9 0xFFE60029 +#define RSPR10 0xFFE6002A +#define RSPR11 0xFFE6002B +#define RSPR12 0xFFE6002C +#define RSPR13 0xFFE6002D +#define RSPR14 0xFFE6002E +#define RSPR15 0xFFE6002F +#define RSPR16 0xFFE60030 +#define RSPRD 0xFFE60031 +#define DTOUTR 0xFFE60032 +#define DR 0xFFE60040 +#define DMACR 0xFFE60044 +#define INTCR2 0xFFE60046 +#define INTSTR2 0xFFE60048 + +/* Audio Codec Interface */ +#define HACCR 0xFFE40008 +#define HACCSAR 0xFFE40020 +#define HACCSDR 0xFFE40024 +#define HACPCML 0xFFE40028 +#define HACPCMR 0xFFE4002C +#define HACTIER 0xFFE40050 +#define HACTSR 0xFFE40054 +#define HACRIER 0xFFE40058 +#define HACRSR 0xFFE4005C +#define HACACR 0xFFE40060 + +/* Serial Sound Interface */ +#define SSICR 0xFFE70000 +#define SSISR 0xFFE70004 +#define SSITDR 0xFFE70008 +#define SSIRDR 0xFFE7000C + +/* Flash memory Controller */ +#define FLCMNCR 0xFFE90000 +#define FLCMDCR 0xFFE90004 +#define FLCMCDR 0xFFE90008 +#define FLADR 0xFFE9000C +#define FLDATAR 0xFFE90010 +#define FLDTCNTR 0xFFE90014 +#define FLINTDMACR 0xFFE90018 +#define FLBSYTMR 0xFFE9001C +#define FLBSYCNT 0xFFE90020 +#define FLTRCR 0xFFE9002C + +/* General Purpose I/O */ +#define PACR 0xFFEA0000 +#define PBCR 0xFFEA0002 +#define PCCR 0xFFEA0004 +#define PDCR 0xFFEA0006 +#define PECR 0xFFEA0008 +#define PFCR 0xFFEA000A +#define PGCR 0xFFEA000C +#define PHCR 0xFFEA000E +#define PJCR 0xFFEA0010 +#define PKCR 0xFFEA0012 +#define PLCR 0xFFEA0014 +#define PMCR 0xFFEA0016 +#define PADR 0xFFEA0020 +#define PBDR 0xFFEA0022 +#define PCDR 0xFFEA0024 +#define PDDR 0xFFEA0026 +#define PEDR 0xFFEA0028 +#define PFDR 0xFFEA002A +#define PGDR 0xFFEA002C +#define PHDR 0xFFEA002E +#define PJDR 0xFFEA0030 +#define PKDR 0xFFEA0032 +#define PLDR 0xFFEA0034 +#define PMDR 0xFFEA0036 +#define PEPUPR 0xFFEA0048 +#define PHPUPR 0xFFEA004E +#define PJPUPR 0xFFEA0050 +#define PKPUPR 0xFFEA0052 +#define PMPUPR 0xFFEA0056 +#define PPUPR1 0xFFEA0060 +#define PPUPR2 0xFFEA0062 +#define PMSELR 0xFFEA0080 + +/* User Break Controller */ +#define CBR0 0xFF200000 +#define CRR0 0xFF200004 +#define CAR0 0xFF200008 +#define CAMR0 0xFF20000C +#define CBR1 0xFF200020 +#define CRR1 0xFF200024 +#define CAR1 0xFF200028 +#define CAMR1 0xFF20002C +#define CDR1 0xFF200030 +#define CDMR1 0xFF200034 +#define CETR1 0xFF200038 +#define CCMFR 0xFF200600 +#define CBCR 0xFF200620 + +#endif /* _ASM_CPU_SH7780_H_ */ diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h new file mode 100644 index 0000000..bc59491 --- /dev/null +++ b/include/asm-sh/pci.h @@ -0,0 +1,47 @@ +/* + * SH4 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * u-boot/include/asm-sh/pci.h + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _ASM_PCI_H_ +#define _ASM_PCI_H_ + +#include <pci.h> +#if defined(CONFIG_SH7751_PCI) +int pci_sh7751_init(struct pci_controller *hose); +#elif defined(CONFIG_SH7780_PCI) +int pci_sh7780_init(struct pci_controller *hose); +#else +#error "Not support PCI." +#endif + +/* PCI dword read for sh4 */ +int pci_sh4_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 *value); + +/* PCI dword write for sh4 */ +int pci_sh4_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 value); + +#endif /* _ASM_PCI_H_ */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index bb9a35f..388aa69 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -2,7 +2,8 @@ #define _ASM_SH_PROCESSOR_H_ #if defined CONFIG_SH3 # include <asm/cpu_sh3.h> -#elif defined (CONFIG_SH4) +#elif defined (CONFIG_SH4) || \ + defined (CONFIG_SH4A) # include <asm/cpu_sh4.h> #endif #endif diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 4fb6921..d54da97 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -157,10 +157,9 @@ */ #define CFG_MBYTES_SDRAM (1024) /* 512 MiB TODO: remove */ #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ +#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ -#if 0 -#define CONFIG_ZERO_SDRAM /* Zero SDRAM after setup */ -#endif #define CONFIG_DDR_ECC /* Use ECC when available */ #define SPD_EEPROM_ADDRESS {0x50} #define CONFIG_PROG_SDRAM_TLB @@ -244,9 +243,6 @@ "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ "cp.b 100000 FFFA0000 60000\0" \ "" -#if 0 -#define CONFIG_BOOTCOMMAND "run flash_self" -#endif #define CONFIG_PREBOOT /* enable preboot variable */ @@ -264,7 +260,7 @@ int du440_phy_addr(int devnum); #define CONFIG_PHY_ADDR du440_phy_addr(0) /* PHY address */ #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_GIGE 1 /* Include GbE detection */ +#undef CONFIG_PHY_GIGE /* no GbE detection */ #define CONFIG_HAS_ETH0 #define CFG_RX_ETH_BUFFER 128 @@ -295,7 +291,9 @@ int du440_phy_addr(int devnum); #include <config_cmd_default.h> +#define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_BSP +#define CONFIG_CMD_BMP #define CONFIG_CMD_DATE #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP @@ -431,8 +429,6 @@ int du440_phy_addr(int devnum); #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif -#if 0 -#define CONFIG_SHOW_ACTIVITY 1 -#endif +#define CONFIG_AUTOSCRIPT 1 #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index af78726..432fb31 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -349,6 +349,29 @@ #define CONFIG_ETHPRIME "eTSEC1" /* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* * Environment */ #ifndef CFG_RAMBOOT diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 94c4c6b..92d7aa4 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -323,8 +323,11 @@ /* * Config on-board EEPROM */ -#define CFG_I2C_EEPROM_ADDR 0x50 -#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CFG_EEPROM_PAGE_WRITE_ENABLE /* * General PCI @@ -341,7 +344,7 @@ #define CFG_PCI1_IO_SIZE 0x04000000 /* 64M */ #ifdef CONFIG_PCI - +#define CONFIG_PCI_SKIP_HOST_BRIDGE #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ @@ -549,6 +552,9 @@ #define CONFIG_HAS_ETH1 /* add support for "eth1addr" */ #define CONFIG_ETH1ADDR 00:04:9f:ef:03:02 +/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */ +#define CFG_I2C_MAC_OFFSET 0x7f00 /* MAC address offset in I2C EEPROM */ + #define CONFIG_IPADDR 10.0.0.2 #define CONFIG_SERVERIP 10.0.0.1 #define CONFIG_GATEWAYIP 10.0.0.1 diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index b307bf7..7c4e76e 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -389,6 +389,34 @@ /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "eTSEC1" +/* SERDES */ +#define CONFIG_FSL_SERDES +#define CONFIG_FSL_SERDES1 0xe3000 +#define CONFIG_FSL_SERDES2 0xe3100 + +/* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + /* * Environment */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 90812e9..eaac525 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -416,6 +416,29 @@ #endif /* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* * Environment */ #ifndef CFG_RAMBOOT diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h new file mode 100644 index 0000000..99e1179 --- /dev/null +++ b/include/configs/MigoR.h @@ -0,0 +1,151 @@ +/* + * Configuation settings for the Renesas Solutions Migo-R board + * + * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MIGO_R_H +#define __MIGO_R_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7722 1 +#define CONFIG_MIGO_R 1 + +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_NFS +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_ENV + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.10.100 +#define CONFIG_SERVERIP 192.168.10.77 +#define CONFIG_GATEWAYIP 192.168.10.77 + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* SMC9111 */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE (0xB0000000) + +/* MEMORY */ +#define MIGO_R_SDRAM_BASE (0x8C000000) +#define MIGO_R_FLASH_BASE_1 (0xA0000000) +#define MIGO_R_FLASH_BANK_SIZE (64 * 1024 * 1024) + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Buffer size for input from the Console */ +#define CFG_PBSIZE 256 /* Buffer size for Console output */ +#define CFG_MAXARGS 16 /* max args accepted for monitor commands */ +#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */ +#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ + +/* SCIF */ +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF0 1 +#undef CFG_CONSOLE_INFO_QUIET /* Suppress display of console + information at boot */ +#undef CFG_CONSOLE_OVERWRITE_ROUTINE +#undef CFG_CONSOLE_ENV_OVERWRITE + +#define CFG_MEMTEST_START (MIGO_R_SDRAM_BASE) +#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) + +/* Enable alternate, more extensive, memory test */ +#undef CFG_ALT_MEMTEST +/* Scratch address used by the alternate memory test */ +#undef CFG_MEMTEST_SCRATCH + +/* Enable temporary baudrate change while serial download */ +#undef CFG_LOADS_BAUD_CHANGE + +#define CFG_SDRAM_BASE (MIGO_R_SDRAM_BASE) +/* maybe more, but if so u-boot doesn't know about it... */ +#define CFG_SDRAM_SIZE (64 * 1024 * 1024) +/* default load address for scripts ?!? */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 16 * 1024 * 1024) + +/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ +#define CFG_MONITOR_BASE (MIGO_R_FLASH_BASE_1) +/* Monitor size */ +#define CFG_MONITOR_LEN (128 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CFG_MALLOC_LEN (256 * 1024) +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#undef CFG_FLASH_QUIET_TEST +/* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_EMPTY_INFO +/* Physical start address of Flash memory */ +#define CFG_FLASH_BASE (MIGO_R_FLASH_BASE_1) +/* Max number of sectors on each Flash chip */ +#define CFG_MAX_FLASH_SECT 512 + +/* if you use all NOR Flash , you change dip-switch. Please see MIGO_R01 Manual. */ +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * MIGO_R_FLASH_BANK_SIZE) } + +/* Timeout for Flash erase operations (in ms) */ +#define CFG_FLASH_ERASE_TOUT (3 * 1000) +/* Timeout for Flash write operations (in ms) */ +#define CFG_FLASH_WRITE_TOUT (3 * 1000) +/* Timeout for Flash set sector lock bit operations (in ms) */ +#define CFG_FLASH_LOCK_TOUT (3 * 1000) +/* Timeout for Flash clear lock bit operations (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) + +/* Use hardware flash sectors protection instead of U-Boot software protection */ +#undef CFG_FLASH_PROTECTION +#undef CFG_DIRECT_FLASH_TFTP + +/* ENV setting */ +#define CFG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OVERWRITE 1 +#define CFG_ENV_SECT_SIZE (128 * 1024) +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +/* Offset of env Flash sector relative to CFG_FLASH_BASE */ +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE) + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +#endif /* __MIGO_R_H */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 38fb7c6..3e906c4 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006-2007 + * (C) Copyright 2006-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -35,6 +35,7 @@ #define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define CONFIG_4xx_DCACHE /* Enable i- and d-cache */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -144,6 +145,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth3\0" \ "hostname=alpr\0" \ + "fdt_file=alpr/alpr.dtb\0" \ + "fdt_addr=400000\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath} ${init}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -158,6 +161,10 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ + "net_nfs_fdt=tftp 200000 ${bootfile};" \ + "tftp ${fdt_addr} ${fdt_file};" \ + "run nfsargs addip addtty;" \ + "bootm 200000 - ${fdt_addr}\0" \ "rootpath=/opt/projects/alpr/nfs_root\0" \ "bootfile=/alpr/uImage\0" \ "kernel_addr=fff00000\0" \ @@ -370,4 +377,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index f2c8703..2f551ad 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -8,7 +8,6 @@ #include <asm/blackfin-config-pre.h> #define CONFIG_BAUDRATE 57600 -#define CONFIG_STAMP 1 #define CONFIG_BOOTDELAY 5 #define CFG_AUTOLOAD "no" /*rarpb, bootp or dhcp commands will perform only a */ @@ -30,28 +29,15 @@ #define CONFIG_RTC_BFIN 1 #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ -/* - * Boot Mode Set - * Blackfin can support several boot modes - */ -#define BF533_BYPASS_BOOT 0x0001 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ -#define BF533_PARA_BOOT 0x0002 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ -#define BF533_SPI_BOOT 0x0004 /* Bootmode 3: Boot from SPI flash */ -/* Define the boot mode */ -#define BFIN_BOOT_MODE BF533_BYPASS_BOOT -/* #define BFIN_BOOT_MODE BF533_SPI_BOOT */ - #define CONFIG_PANIC_HANG 1 #define CONFIG_BFIN_CPU bf533-0.3 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS /* This sets the default state of the cache on U-Boot's boot */ #define CONFIG_ICACHE_ON #define CONFIG_DCACHE_ON -/* Define where the uboot will be loaded by on-chip boot rom */ -#define APP_ENTRY 0x00001000 - /* CONFIG_CLKIN_HZ is any value in Hz */ #define CONFIG_CLKIN_HZ 27000000 /* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ @@ -216,24 +202,14 @@ #define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ -/* 0xFF, 0x7BB07BB0, 0x22547BB0 */ -/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) -#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \ - ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN) -#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \ - B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN) -*/ -#define AMGCTLVAL 0xFF -#define AMBCTL0VAL 0x7BB07BB0 -#define AMBCTL1VAL 0xFFC27BB0 - -#define CONFIG_VDSP 1 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif +#define CONFIG_EBIU_SDRRC_VAL 0x398 +#define CONFIG_EBIU_SDGCTL_VAL 0x91118d +#define CONFIG_EBIU_SDBCTL_VAL 0x13 + +#define CONFIG_EBIU_AMGCTL_VAL 0xFF +#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 +#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 + +#include <asm/blackfin-config-post.h> #endif diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 76dd2fa..66a0af6 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -7,37 +7,17 @@ #include <asm/blackfin-config-pre.h> -#define CONFIG_STAMP 1 #define CONFIG_RTC_BFIN 1 -#define CONFIG_BF533 1 -/* - * Boot Mode Set - * Blackfin can support several boot modes - */ -#define BF533_BYPASS_BOOT 0x0001 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ -#define BF533_PARA_BOOT 0x0002 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ -#define BF533_SPI_BOOT 0x0004 /* Bootmode 3: Boot from SPI flash */ -/* Define the boot mode */ -#define BFIN_BOOT_MODE BF533_BYPASS_BOOT -/* #define BFIN_BOOT_MODE BF533_SPI_BOOT */ #define CONFIG_PANIC_HANG 1 #define CONFIG_BFIN_CPU bf533-0.3 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS /* This sets the default state of the cache on U-Boot's boot */ #define CONFIG_ICACHE_ON #define CONFIG_DCACHE_ON -/* Define where the uboot will be loaded by on-chip boot rom */ -#define APP_ENTRY 0x00001000 - -/* - * Stringize definitions - needed for environmental settings - */ -#define STRINGIZE2(x) #x -#define STRINGIZE(x) STRINGIZE2(x) - /* * Board settings */ @@ -61,8 +41,6 @@ */ #define CONFIG_VIDEO 0 -#define CONFIG_VDSP 1 - /* * Clock settings */ @@ -88,10 +66,7 @@ /* Values can range from 2-65535 */ /* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ #define CONFIG_SPI_BAUD 2 - -#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) #define CONFIG_SPI_BAUD_INITBLOCK 4 -#endif /* * Network settings @@ -126,14 +101,14 @@ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR 0x20004000 -#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) #define CFG_ENV_IS_IN_EEPROM 1 #define CFG_ENV_OFFSET 0x4000 #define CFG_ENV_HEADER (CFG_ENV_OFFSET + 0x12A) /* 0x12A is the length of LDR file header */ +#else +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20004000 +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) #endif #define CFG_ENV_SIZE 0x2000 @@ -165,11 +140,7 @@ #define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ #define CONFIG_MEM_MT48LC64M4A2FB_7E 1 -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #define CFG_MEMTEST_START 0x00000000 /* memtest works on */ -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#endif #define CFG_SDRAM_BASE 0x00000000 @@ -207,14 +178,6 @@ #define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ #endif -#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000) -#define CONFIG_SPI_FLASH_FAST_READ 1 /* Needed if SPI_CLK > 20 MHz */ -#else -#undef CONFIG_SPI_FLASH_FAST_READ -#endif -#endif - /* * Command settings */ @@ -222,26 +185,18 @@ #define CFG_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #define CFG_AUTOLOAD "no" /*rarpb, bootp or dhcp commands will perform only a */ -#endif /* configuration lookup from the BOOTP/DHCP server, */ /* but not try to load any image using TFTP */ #define CONFIG_BOOTDELAY 5 #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #define CONFIG_BOOTCOMMAND "run ramboot" -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#define CONFIG_BOOTCOMMAND "eeprom read 0x1000000 0x100000 0x180000;icache on;dcache on;bootm 0x1000000" -#endif #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) -#if (CONFIG_DRIVER_SMC91111) #define CONFIG_EXTRA_ENV_SETTINGS \ "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ @@ -257,29 +212,6 @@ "protect off 0x20000000 0x2003FFFF; erase 0x20000000 0x2003FFFF;" \ "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \ "" -#else -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "flashboot=bootm 0x20100000\0" \ - " -#endif - -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ - "$(rootpath) console=ttyBF0,57600\0" \ - "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \ - "$(gatewayip):$(netmask):$(hostname):eth0:off\0" \ - "ramboot=tftpboot $(loadaddr) linux; " \ - "run ramargs;run addip;bootelf\0" \ - "nfsboot=tftpboot $(loadaddr) linux; " \ - "run nfsargs;run addip;bootelf\0" \ - "flashboot=bootm 0x20100000\0" \ - "update=tftpboot $(loadaddr) u-boot.ldr;" \ - "eeprom write $(loadaddr) 0x0 $(filesize);\0"\ - "" -#endif #ifdef CONFIG_SOFT_I2C #if (!CONFIG_SOFT_I2C) @@ -316,9 +248,7 @@ #define CONFIG_CMD_I2C #endif -#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #define CONFIG_CMD_DHCP -#endif /* @@ -428,25 +358,16 @@ /* * FLASH organization and environment definitions */ -#define CFG_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ - -/* 0xFF, 0xBBC3BBc3, 0x99B39983 */ -/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) -#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ - B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) -#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ - B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) -*/ -#define AMGCTLVAL 0xFF -#define AMBCTL0VAL 0xBBC3BBC3 -#define AMBCTL1VAL 0x99B39983 -#define CF_AMBCTL1VAL 0x99B3ffc2 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif + +#define CONFIG_EBIU_SDRRC_VAL 0x268 +#define CONFIG_EBIU_SDGCTL_VAL 0x911109 +#define CONFIG_EBIU_SDBCTL_VAL 0x37 + +#define CONFIG_EBIU_AMGCTL_VAL 0xFF +#define CONFIG_EBIU_AMBCTL0_VAL 0xBBC3BBC3 +#define CONFIG_EBIU_AMBCTL1_VAL 0x99B39983 +#define CF_CONFIG_EBIU_AMBCTL1_VAL 0x99B3ffc2 + +#include <asm/blackfin-config-post.h> #endif diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 0e189d4..39c7359 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -12,28 +12,15 @@ #define CONFIG_BAUDRATE 57600 /* Set default serial console for bf537 */ #define CONFIG_UART_CONSOLE 0 -#define CONFIG_BF537 1 #define CONFIG_BOOTDELAY 5 /* define CONFIG_BF537_STAMP_LEDCMD to enable LED command*/ /*#define CONFIG_BF537_STAMP_LEDCMD 1*/ -/* - * Boot Mode Set - * Blackfin can support several boot modes - */ -#define BF537_BYPASS_BOOT 0x0011 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ -#define BF537_PARA_BOOT 0x0012 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ -#define BF537_SPI_MASTER_BOOT 0x0014 /* Bootmode 3: SPI master mode boot from SPI flash */ -#define BF537_SPI_SLAVE_BOOT 0x0015 /* Bootmode 4: SPI slave mode boot from SPI flash */ -#define BF537_TWI_MASTER_BOOT 0x0016 /* Bootmode 5: TWI master mode boot from EEPROM */ -#define BF537_TWI_SLAVE_BOOT 0x0017 /* Bootmode 6: TWI slave mode boot from EEPROM */ -#define BF537_UART_BOOT 0x0018 /* Bootmode 7: UART slave mdoe boot via UART host */ -/* Define the boot mode */ -#define BFIN_BOOT_MODE BF537_BYPASS_BOOT - #define CONFIG_PANIC_HANG 1 #define CONFIG_BFIN_CPU bf537-0.2 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS + #define CONFIG_BFIN_MAC /* This sets the default state of the cache on U-Boot's boot */ @@ -43,9 +30,6 @@ /* Define if want to do post memory test */ #undef CONFIG_POST_TEST -/* Define where the uboot will be loaded by on-chip boot rom */ -#define APP_ENTRY 0x00001000 - #define CONFIG_RTC_BFIN 1 #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ @@ -70,9 +54,7 @@ /* Values can range from 2-65535 */ /* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ #define CONFIG_SPI_BAUD 2 -#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) #define CONFIG_SPI_BAUD_INITBLOCK 4 -#endif #if ( CONFIG_CLKIN_HALF == 0 ) #define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) @@ -88,14 +70,6 @@ #define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ #endif -#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) -#if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000) -#define CONFIG_SPI_FLASH_FAST_READ 1 /* Needed if SPI_CLK > 20 MHz */ -#else -#undef CONFIG_SPI_FLASH_FAST_READ -#endif -#endif - #define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */ #define CONFIG_MEM_ADD_WDTH 10 /* 8, 9, 10, 11 */ #define CONFIG_MEM_MT48LC32M8A2_75 1 @@ -131,7 +105,7 @@ #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ #define CONFIG_BOOTCOMMAND "run ramboot" -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) && defined(CONFIG_POST_TEST) +#if defined(CONFIG_POST_TEST) /* POST support */ #define CONFIG_POST ( CFG_POST_MEMORY | \ CFG_POST_UART | \ @@ -177,8 +151,6 @@ */ #include <config_cmd_default.h> -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) - #define CONFIG_CMD_ELF #define CONFIG_CMD_I2C #define CONFIG_CMD_CACHE @@ -198,10 +170,6 @@ #define CONFIG_CMD_IDE #endif -#endif - -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) - #define CONFIG_CMD_DHCP #if defined(CONFIG_POST) @@ -212,14 +180,10 @@ #define CONFIG_CMD_NAND #endif -#endif - #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" #define CONFIG_LOADADDR 0x1000000 -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) -#ifdef CONFIG_BFIN_MAC #define CONFIG_EXTRA_ENV_SETTINGS \ "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -236,36 +200,6 @@ "protect off 0x20000000 0x2007FFFF;" \ "erase 0x20000000 0x2007FFFF;cp.b 0x1000000 0x20000000 $(filesize)\0" \ "" -#else -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "flashboot=bootm 0x20100000\0" \ - "" -#endif -#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) -#ifdef CONFIG_BFIN_MAC -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath) console=ttyBF0,57600\0"\ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ - ":$(hostname):eth0:off\0" \ - "ramboot=tftpboot $(loadaddr) linux;" \ - "run ramargs;run addip;bootelf\0" \ - "nfsboot=tftpboot $(loadaddr) linux;" \ - "run nfsargs;run addip;bootelf\0" \ - "flashboot=bootm 0x20100000\0" \ - "update=tftpboot $(loadaddr) u-boot.ldr;" \ - "eeprom write $(loadaddr) 0x0 $(filesize);\0" \ - "" -#else -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ - "flashboot=bootm 0x20100000\0" \ - "" -#endif -#endif #define CFG_PROMPT "bfin> " /* Monitor Command Prompt */ @@ -300,21 +234,18 @@ #define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) #define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) -#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_UART_BOOT) -/* for bf537-stamp, usrt boot mode still store env in flash */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR 0x20004000 -#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) -#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) #define CFG_ENV_IS_IN_EEPROM 1 #define CFG_ENV_OFFSET 0x4000 #define CFG_ENV_HEADER (CFG_ENV_OFFSET + 0x16e) /* 0x12A is the length of LDR file header */ +#else +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20004000 +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) #endif #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_SECT_SIZE 0x2000 /* Total Size of Environment Sector */ -/* #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) */ #define ENV_IS_EMBEDDED -/* #endif */ /* JFFS Partition offset set */ #define CFG_JFFS2_FIRST_BANK 0 @@ -383,6 +314,14 @@ #define CONFIG_TWICLK_KHZ 50 #endif +#define CONFIG_EBIU_SDRRC_VAL 0x306 +#define CONFIG_EBIU_SDGCTL_VAL 0x91114d +#define CONFIG_EBIU_SDBCTL_VAL 0x25 + +#define CONFIG_EBIU_AMGCTL_VAL 0xFF +#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 +#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 + #if defined CONFIG_SOFT_I2C /* * Software (bit-bang) I2C driver configuration @@ -428,15 +367,6 @@ #define AMBCTL0VAL 0x7BB07BB0 #define AMBCTL1VAL 0xFFC27BB0 -#define CONFIG_VDSP 1 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif - #if defined(CONFIG_BFIN_IDE) #define CONFIG_DOS_PARTITION 1 @@ -492,4 +422,6 @@ #endif /*CONFIG_BFIN_IDE */ +#include <asm/blackfin-config-post.h> + #endif diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index c29555a..641548d 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -7,9 +7,6 @@ #include <asm/blackfin-config-pre.h> -#define CONFIG_VDSP 1 -#define CONFIG_BF561 1 - #define CFG_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_BAUDRATE 57600 @@ -21,30 +18,12 @@ #define CONFIG_PANIC_HANG 1 #define CONFIG_BFIN_CPU bf561-0.3 - -/* -* Boot Mode Set -* Blackfin can support several boot modes -*/ -#define BF561_BYPASS_BOOT 0x21 -#define BF561_PARA_BOOT 0x22 -#define BF561_SPI_BOOT 0x24 -/* Define the boot mode */ -#define BFIN_BOOT_MODE BF561_BYPASS_BOOT +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS /* This sets the default state of the cache on U-Boot's boot */ #define CONFIG_ICACHE_ON #define CONFIG_DCACHE_ON -/* Define where the uboot will be loaded by on-chip boot rom */ -#define APP_ENTRY 0x00001000 - -/* - * Stringize definitions - needed for environmental settings - */ -#define STRINGIZE2(x) #x -#define STRINGIZE(x) STRINGIZE2(x) - /* * Board settings */ @@ -242,17 +221,14 @@ /* * FLASH organization and environment definitions */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_EBIU_SDRRC_VAL 0x306 +#define CONFIG_EBIU_SDGCTL_VAL 0x91114d +#define CONFIG_EBIU_SDBCTL_VAL 0x15 -#define AMGCTLVAL 0x3F -#define AMBCTL0VAL 0x7BB07BB0 -#define AMBCTL1VAL 0xFFC27BB0 +#define CONFIG_EBIU_AMGCTL_VAL 0x3F +#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 +#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif +#include <asm/blackfin-config-post.h> #endif /* __CONFIG_EZKIT561_H__ */ diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index a4bcc65..a1c6674 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -27,16 +27,21 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_CANYONLANDS 1 /* Board is Canyonlands */ +/* This config file is used for Canyonlands (460EX) and Glacier (460GT) */ +#ifndef CONFIG_CANYONLANDS +#define CONFIG_460GT 1 /* Specific PPC460GT */ +#else +#define CONFIG_460EX 1 /* Specific PPC460EX */ +#endif #define CONFIG_440 1 #define CONFIG_4xx 1 /* ... PPC4xx family */ -#define CONFIG_460EX 1 /* Specific PPC460EX support */ #define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_BOARD_TYPES 1 /* support board types */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -262,8 +267,15 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ #define CONFIG_PHY1_ADDR 1 -#define CONFIG_HAS_ETH0 1 -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +/* Only Glacier (460GT) has 4 EMAC interfaces */ +#ifdef CONFIG_460GT +#define CONFIG_PHY2_ADDR 2 +#define CONFIG_PHY3_ADDR 3 +#define CONFIG_HAS_ETH2 +#define CONFIG_HAS_ETH3 +#endif #define CONFIG_NET_MULTI 1 #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ @@ -275,6 +287,8 @@ /*----------------------------------------------------------------------- * USB-OHCI *----------------------------------------------------------------------*/ +/* Only Canyonlands (460EX) has USB */ +#ifdef CONFIG_460EX #define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE #undef CFG_OHCI_BE_CONTROLLER /* 460EX has little endian descriptors */ @@ -283,6 +297,7 @@ #define CFG_USB_OHCI_REGS_BASE (CFG_AHB_BASE | 0xd0000) #define CFG_USB_OHCI_SLOT_NAME "ppc440" #define CFG_USB_OHCI_MAX_ROOT_PORTS 15 +#endif /*----------------------------------------------------------------------- * Default environment @@ -293,9 +308,21 @@ #undef CONFIG_BOOTARGS +/* Setup some board specific values for the default environment variables */ +#ifdef CONFIG_CANYONLANDS +#define CONFIG_HOSTNAME canyonlands +#define CFG_BOOTFILE "bootfile=canyonlands/uImage\0" +#define CFG_DTBFILE "fdt_file=canyonlands/canyonlands.dtb\0" +#else +#define CONFIG_HOSTNAME glacier +#define CFG_BOOTFILE "bootfile=glacier/uImage\0" +#define CFG_DTBFILE "fdt_file=glacier/glacier.dtb\0" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ + CFG_BOOTFILE \ + CFG_DTBFILE \ "netdev=eth0\0" \ - "hostname=canyonlands\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -315,18 +342,16 @@ "flash_self=run ramargs addip addtty;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "rootpath=/opt/eldk/ppc_4xxFP\0" \ - "bootfile=canyonlands/uImage\0" \ - "fdt_file=canyonlands/canyonlands.dtb\0" \ "fdt_addr=400000\0" \ "kernel_addr=fc000000\0" \ "ramdisk_addr=fc200000\0" \ "initrd_high=30000000\0" \ - "load=tftp 200000 canyonlands/u-boot.bin\0" \ + "load=tftp 200000 ${hostname}/u-boot.bin\0" \ "update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \ "cp.b ${fileaddr} fffa0000 ${filesize};" \ "setenv filesize;saveenv\0" \ "upd=run load update\0" \ - "nload=tftp 200000 canyonlands/u-boot-nand.bin\0" \ + "nload=tftp 200000 ${hostname}/u-boot-nand.bin\0" \ "nupdate=nand erase 0 60000;nand write 200000 0 60000;" \ "setenv filesize;saveenv\0" \ "nupd=run nload nupdate\0" \ @@ -361,8 +386,6 @@ #define CONFIG_CMD_DIAG #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_MII @@ -373,7 +396,11 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SDRAM +#ifdef CONFIG_460EX +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT #define CONFIG_CMD_USB +#endif /* Partitions */ #define CONFIG_MAC_PARTITION @@ -487,6 +514,8 @@ /* * PPC4xx GPIO Configuration */ +#ifdef CONFIG_460EX +/* 460EX: Use USB configuration */ #define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ { \ /* GPIO Core 0 */ \ @@ -559,6 +588,81 @@ {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ } \ } +#else +/* 460GT: Use EMAC2+3 configuration */ +#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ +{ \ +/* GPIO Core 0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0) USB2HostD(0) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1) USB2HostD(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2) USB2HostD(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3) USB2HostD(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4) USB2HostD(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5) USB2HostD(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6) USB2HostD(6) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7) USB2HostD(7) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0) USB2OTGD(0) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1) USB2OTGD(1) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2) USB2OTGD(2) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3) USB2OTGD(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4) USB2OTGD(4) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5) USB2OTGD(5) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6) USB2OTGD(6) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7) USB2OTGD(7) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMC1TxER USB2HostStop */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD USB2HostNext */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER USB2HostDir */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMC1TxEN USB2OTGStop */ \ +{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS USB2OTGNext */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV USB2OTGDir */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0 DMAReq2 IRQ(7)*/ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1 DMAAck2 IRQ(8)*/ \ +}, \ +{ \ +/* GPIO Core 1 */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2 EOT2/TC2 IRQ(9)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3 DMAReq3 IRQ(4)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3 UART3_SIN*/ \ +{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EOT3/TC3 UART3_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6) DMAAck0 IRQ(14)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7) EOT/TC0 IRQ(15)*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ +} \ +} +#endif /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index 8ecd059..17d3b03 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -52,6 +52,9 @@ #define DV_EVM #define CFG_NAND_SMALLPAGE #define CFG_USE_NOR +#define CFG_USE_INTEL_NOR /* Define this when your DVEVM has Intel + * flash instead of AMD flash + */ /*===================*/ /* SoC Configuration */ /*===================*/ @@ -60,6 +63,24 @@ #define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ #define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CFG_HZ 1000 +#define CFG_DAVINCI_PINMUX_0 0x00000c1f +#define CFG_DAVINCI_WAITCFG 0x00000000 +#define CFG_DAVINCI_ACFG2 0x3ffffffd /* CE configs */ +#define CFG_DAVINCI_ACFG3 0x3ffffffd +#define CFG_DAVINCI_ACFG4 0x3ffffffd +#define CFG_DAVINCI_ACFG5 0x3ffffffd +#undef CFG_DAVINCI_NANDCE /* When using NAND, define 2,3 or 4 */ +#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */ +#define CFG_DAVINCI_SDREF 0x000005c3 +#define CFG_DAVINCI_SDCFG 0x00178632 /* 8 banks */ +#define CFG_DAVINCI_SDTIM0 0x28923211 +#define CFG_DAVINCI_SDTIM1 0x0016c722 +#define CFG_DAVINCI_MMARG_BRF0 0x00444400 +/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */ +#define CFG_DAVINCI_PLL1_PLLM 0x15 +#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */ +#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */ +#define CFG_DAVINCI_PLL2_DIV2 0x01 /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ /* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ @@ -114,7 +135,7 @@ #ifdef CFG_USE_NAND #undef CFG_ENV_IS_IN_FLASH #define CFG_NO_FLASH -#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ #ifdef CFG_NAND_SMALLPAGE #define CFG_ENV_SECT_SIZE 512 /* Env sector Size */ #define CFG_ENV_SIZE SZ_16K @@ -139,24 +160,31 @@ #undef CONFIG_SKIP_RELOCATE_UBOOT #endif #define CFG_ENV_IS_IN_FLASH -#undef CFG_NO_FLASH +#undef CFG_NO_FLASH #define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI #define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */ -#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3) -#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) +#define CFG_ENV_OFFSET (CFG_ENV_ADDR) +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ #define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ -#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ +#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ #define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ) #define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */ +#ifdef CFG_USE_INTEL_NOR +#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size INTEL Flash */ +#define CFG_FLASH_PROTECTION 1 +#else +#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */ +#endif #endif /*==============================*/ /* U-Boot general configuration */ /*==============================*/ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY +#undef CONFIG_BOOTDELAY #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 96c9a30..cb69535 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -35,6 +35,24 @@ #define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ #define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CFG_HZ 1000 +#define CFG_DAVINCI_PINMUX_0 0x00000c1f +#define CFG_DAVINCI_WAITCFG 0x00000000 +#define CFG_DAVINCI_ACFG2 0x0432229c /* CE configs */ +#define CFG_DAVINCI_ACFG3 0x3ffffffd +#define CFG_DAVINCI_ACFG4 0x3ffffffd +#define CFG_DAVINCI_ACFG5 0x3ffffffd +#define CFG_DAVINCI_NANDCE 2 /* When using NAND, define 2,3 or 4 */ +#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */ +#define CFG_DAVINCI_SDREF 0x000005c3 +#define CFG_DAVINCI_SDCFG 0x00178622 /* 4 banks */ +#define CFG_DAVINCI_SDTIM0 0x28923211 +#define CFG_DAVINCI_SDTIM1 0x0016c722 +#define CFG_DAVINCI_MMARG_BRF0 0x00444400 +/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */ +#define CFG_DAVINCI_PLL1_PLLM 0x15 +#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */ +#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */ +#define CFG_DAVINCI_PLL2_DIV2 0x01 /*=============*/ /* Memory Info */ /*=============*/ @@ -46,7 +64,6 @@ #define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ -#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ /*====================*/ /* Serial Driver info */ /*====================*/ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index de8c4fa..b2c0d7d 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -60,6 +60,24 @@ #define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ #define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CFG_HZ 1000 +#define CFG_DAVINCI_PINMUX_0 0x00000c1f +#define CFG_DAVINCI_WAITCFG 0x00000000 +#define CFG_DAVINCI_ACFG2 0x3ffffffd /* CE configs */ +#define CFG_DAVINCI_ACFG3 0x3ffffffd +#define CFG_DAVINCI_ACFG4 0x3ffffffd +#define CFG_DAVINCI_ACFG5 0x3ffffffd +#undef CFG_DAVINCI_NANDCE /* When using NAND, define 2,3 or 4 */ +#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */ +#define CFG_DAVINCI_SDREF 0x000005c3 +#define CFG_DAVINCI_SDCFG 0x00178632 /* 8 banks */ +#define CFG_DAVINCI_SDTIM0 0x28923211 +#define CFG_DAVINCI_SDTIM1 0x0016c722 +#define CFG_DAVINCI_MMARG_BRF0 0x00444400 +/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */ +#define CFG_DAVINCI_PLL1_PLLM 0x15 +#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */ +#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */ +#define CFG_DAVINCI_PLL2_DIV2 0x01 /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ /* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h new file mode 100644 index 0000000..a6ed77a --- /dev/null +++ b/include/configs/imx31_litekit.h @@ -0,0 +1,167 @@ +/* + * (C) Copyright 2004 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Kshitij Gupta <kshitij@ti.com> + * + * Configuration settings for the 242x TI H4 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + /* High Level Configuration Options */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_MX31_HCLK_FREQ 26000000 +#define CONFIG_MX31_CLK32 32000 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Temporarily disabled */ +#if 0 +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#endif + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024) +#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +#define CONFIG_MX31_UART 1 +#define CFG_MX31_UART1 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.23.168 +#define CONFIG_SERVERIP 192.168.23.2 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ + "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ + "ip=dhcp nfsroot=$(serverip):$(nfsrootfs), v3, tcp\0" \ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ + "tftpboot 0x80000000 uImage-mx31; bootm\0" \ + "prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; " \ + "protect off all; erase 0xa00d0000 0xa01effff; " \ + "cp.b 0x80000000 0xa00d0000 $(filesize)\0" + +#define CONFIG_DRIVER_SMC911X 1 +#define CONFIG_DRIVER_SMC911X_BASE 0xb4020000 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "uboot> " +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0 /* memtest works on */ +#define CFG_MEMTEST_END 0x10000 + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0 /* default load address */ + +#define CFG_HZ 32000 + +#define CONFIG_CMDLINE_EDITING 1 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_FLASH_BASE 0xa0000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +/* Monitor at beginning of flash */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE + +#define CFG_ENV_ADDR 0xa01f0000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SECT_SIZE (64 * 1024) +#define CFG_ENV_SIZE (64 * 1024) + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ + +/* + * JFFS2 partitions + */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h new file mode 100644 index 0000000..647b05b --- /dev/null +++ b/include/configs/imx31_phycore.h @@ -0,0 +1,190 @@ +/* + * (C) Copyright 2004 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Kshitij Gupta <kshitij@ti.com> + * + * Configuration settings for the 242x TI H4 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + /* High Level Configuration Options */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_MX31_HCLK_FREQ 26000000 +#define CONFIG_MX31_CLK32 32000 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Temporarily disabled */ +#if 0 +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#endif + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024) +#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +#define CONFIG_HARD_I2C 1 +#define CONFIG_I2C_MXC 1 +#define CFG_I2C_MX31_PORT2 1 +#define CFG_I2C_SPEED 100000 +#define CFG_I2C_SLAVE 0xfe + +#define CONFIG_MX31_UART 1 +#define CFG_MX31_UART1 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C + +#define CONFIG_BOOTDELAY 3 + +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)" + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.23.168 +#define CONFIG_SERVERIP 192.168.23.2 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ + "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ + "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ + "bootargs_flash=setenv bootargs $(bootargs) " \ + "root=/dev/mtdblock2 rootfstype=jffs2\0" \ + "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ + "tftpboot 0x80000000 $(uimage); bootm\0" \ + "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; " \ + "bootm 0x80000000\0" \ + "unlock=yes\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "prg_uboot=tftpboot 0x80000000 $(uboot); " \ + "protect off 0xa0000000 +0x20000; " \ + "erase 0xa0000000 +0x20000; " \ + "cp.b 0x80000000 0xa0000000 $(filesize)\0" \ + "prg_kernel=tftpboot 0x80000000 $(uimage); " \ + "erase 0xa0040000 +0x180000; " \ + "cp.b 0x80000000 0xa0040000 $(filesize)\0" \ + "prg_jffs2=tftpboot 0x80000000 $(jffs2); " \ + "erase 0xa01c0000 0xa1ffffff; " \ + "cp.b 0x80000000 0xa01c0000 $(filesize)\0" + +#define CONFIG_DRIVER_SMC911X 1 +#define CONFIG_DRIVER_SMC911X_BASE 0xa8000000 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "uboot> " +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0 /* memtest works on */ +#define CFG_MEMTEST_END 0x10000 + +#define CFG_LOAD_ADDR 0 /* default load address */ + +#define CFG_HZ 32000 + +#define CONFIG_CMDLINE_EDITING 1 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_FLASH_BASE 0xa0000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 259 /* max number of sectors on one chip */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ + +#define CFG_ENV_IS_IN_EEPROM 1 +#define CFG_ENV_OFFSET 0x00 /* environment starts here */ +#define CFG_ENV_SIZE 4096 +#define CFG_I2C_EEPROM_ADDR 0x52 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* length of byte address */ + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ + +/* + * JFFS2 partitions + */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/korat.h b/include/configs/korat.h index dcec9b0..48d73ac 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -45,10 +45,10 @@ * Manufacturer's information serial EEPROM parameters */ #define MAN_DATA_EEPROM_ADDR 0x53 /* EEPROM I2C address */ -#define MAN_SERIAL_NO_FIELD 2 -#define MAN_SERIAL_NO_LENGTH 13 +#define MAN_INFO_FIELD 2 +#define MAN_INFO_LENGTH 9 #define MAN_MAC_ADDR_FIELD 3 -#define MAN_MAC_ADDR_LENGTH 17 +#define MAN_MAC_ADDR_LENGTH 12 /* * Base addresses -- Note these are effective addresses where the actual @@ -57,17 +57,18 @@ #define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kiB for Monitor */ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kiB for malloc() */ -#define CFG_BOOT_BASE_ADDR 0xf0000000 #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ +#define CFG_FLASH0_SIZE 0x01000000 +#define CFG_FLASH0_ADDR (-CFG_FLASH0_SIZE) +#define CFG_FLASH1_TOP 0xF8000000 +#define CFG_FLASH1_MAX_SIZE 0x08000000 +#define CFG_FLASH1_ADDR (CFG_FLASH1_TOP - CFG_FLASH1_MAX_SIZE) +#define CFG_FLASH_BASE CFG_FLASH1_ADDR /* start of FLASH */ #define CFG_MONITOR_BASE TEXT_BASE #define CFG_OCM_BASE 0xe0010000 /* ocm */ #define CFG_OCM_DATA_ADDR CFG_OCM_BASE #define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ #define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 -#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 -#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 /* Don't change either of these */ #define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ @@ -108,13 +109,14 @@ /* * FLASH related */ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CONFIG_FLASH_CFI_LEGACY /* Allow hard-coded config for FLASH0 */ -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_BANKS_LIST { CFG_FLASH1_ADDR, CFG_FLASH0_ADDR } -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 1024 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ @@ -126,12 +128,12 @@ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ #define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_FLASH1_TOP - CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ -/* Address and size of Redundant Environment Sector */ -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE /* * DDR SDRAM @@ -144,6 +146,8 @@ #define SPD_EEPROM_ADDRESS {0x50} #define CONFIG_PROG_SDRAM_TLB #define CFG_DRAM_TEST +#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ /* * I2C @@ -180,6 +184,7 @@ #define CFG_BOOTFILE "bootfile=/tftpboot/korat/uImage\0" #define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0" +/* Note: kernel_addr and ramdisk_addr assume that FLASH1 is 64 MiB. */ #define CONFIG_EXTRA_ENV_SETTINGS \ CFG_BOOTFILE \ CFG_ROOTPATH \ @@ -197,8 +202,8 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ - "kernel_addr=FC000000\0" \ - "ramdisk_addr=FC180000\0" \ + "kernel_addr=F4000000\0" \ + "ramdisk_addr=F4400000\0" \ "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ "cp.b 200000 FFFA0000 60000\0" \ @@ -216,7 +221,7 @@ #define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */ #define CONFIG_PHY_DYNAMIC_ANEG 1 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#undef CONFIG_PHY_RESET /* Don't do software PHY reset */ #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #define CONFIG_HAS_ETH0 @@ -322,6 +327,11 @@ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ /* + * Korat-specific options + */ +#define CFG_KORAT_MAN_RESET_MS 10000 /* timeout for manufacturer reset */ + +/* * PCI stuff */ /* General PCI */ @@ -350,12 +360,23 @@ */ /* Memory Bank 0 (NOR-FLASH) initialization */ +#if CFG_FLASH0_SIZE == 0x01000000 +#define CFG_EBC_PB0AP 0x04017300 +#define CFG_EBC_PB0CR (CFG_FLASH0_ADDR | 0x0009A000) +#elif CFG_FLASH0_SIZE == 0x04000000 #define CFG_EBC_PB0AP 0x04017300 -#define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0x000DA000) +#define CFG_EBC_PB0CR (CFG_FLASH0_ADDR | 0x000DA000) +#else +#error Unable to configure chip select for current CFG_FLASH0_SIZE +#endif /* Memory Bank 1 (NOR-FLASH) initialization */ +#if CFG_FLASH1_MAX_SIZE == 0x08000000 #define CFG_EBC_PB1AP 0x04017300 -#define CFG_EBC_PB1CR (0xF8000000 | 0x000DA000) +#define CFG_EBC_PB1CR (CFG_FLASH1_ADDR | 0x000FA000) +#else +#error Unable to configure chip select for current CFG_FLASH1_MAX_SIZE +#endif /* Memory Bank 2 (CPLD) initialization */ #define CFG_EBC_PB2AP 0x04017300 @@ -426,6 +447,7 @@ * GPIO63 xxxx x x (reserved for trace port) */ +#define CFG_GPIO_ATMEGA_RESET_ 12 #define CFG_GPIO_ATMEGA_SS_ 13 #define CFG_GPIO_PHY0_FIBER_SEL 27 #define CFG_GPIO_PHY1_FIBER_SEL 28 @@ -435,6 +457,7 @@ #define CFG_GPIO_SFP1_TX_EN_ 33 #define CFG_GPIO_PHY0_EN 45 #define CFG_GPIO_PHY1_EN 46 +#define CFG_GPIO_RESET_PRESSED_ 47 /* * PPC440 GPIO Configuration diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index ced7ba6..4398b87 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -86,6 +86,8 @@ #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6) /* unused GPT0 COMP reg */ +#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ /* Additional registers for watchdog timer post test */ @@ -149,12 +151,8 @@ #define CFG_MBYTES_SDRAM (256) /* 256MB */ #define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ #define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */ -#if 0 /* test-only: disable ECC for now */ #define CONFIG_DDR_ECC 1 /* enable ECC */ #define CFG_POST_ECC_ON CFG_POST_ECC -#else -#define CFG_POST_ECC_ON 0 -#endif /* POST support */ #define CONFIG_POST (CFG_POST_CACHE | \ diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h new file mode 100644 index 0000000..0fc0b97 --- /dev/null +++ b/include/configs/mpr2.h @@ -0,0 +1,92 @@ +/* + * Configuation settings for MPR2 + * + * Copyright (C) 2008 + * Mark Jonas <mark.jonas@de.bosch.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MPR2_H +#define __MPR2_H + +/* Supported commands */ +#define CONFIG_CMD_ENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_FLASH + +/* Default environment variables */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS "console=ttySC0,115200" +#define CONFIG_BOOTFILE /boot/zImage +#define CONFIG_LOADADDR 0x8E000000 +#define CONFIG_VERSION_VARIABLE + +/* CPU and platform */ +#define CONFIG_SH 1 +#define CONFIG_SH3 1 +#define CONFIG_CPU_SH7720 1 +#define CONFIG_MPR2 1 + +/* U-Boot internals */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Buffer size for input from the Console */ +#define CFG_PBSIZE 256 /* Buffer size for Console output */ +#define CFG_MAXARGS 16 /* max args accepted for monitor commands */ +#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */ +#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024) +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (128 * 1024) +#define CFG_MALLOC_LEN (256 * 1024) +#define CFG_GBL_DATA_SIZE 256 + +/* Memory */ +#define CFG_SDRAM_BASE 0x8C000000 +#define CFG_SDRAM_SIZE (64 * 1024 * 1024) +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) + +/* Flash */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_BASE 0xA0000000 +#define CFG_MAX_FLASH_SECT 256 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE (128 * 1024) +#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 120000 +#define CFG_FLASH_WRITE_TOUT 500 + +/* Clocks */ +#define CONFIG_SYS_CLK_FREQ 24000000 +#define TMU_CLK_DIVIDER 4 /* 4 (default), 16, 64, 256 or 1024 */ +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +/* UART */ +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF0 1 + +#endif /* __MPR2_H */ diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h new file mode 100644 index 0000000..be7f3c6 --- /dev/null +++ b/include/configs/mx31ads.h @@ -0,0 +1,170 @@ +/* + * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de> + * + * Configuration settings for the MX31ADS Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/mx31-regs.h> + + /* High Level Configuration Options */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */ +#define CONFIG_MX31_CLK32 32000 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* + * Disabled for now due to build problems under Debian and + * a significant increase in the final file size: 144260 vs. 109536 Bytes + */ +#if 0 +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#endif + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024) +#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +#define CONFIG_MX31_UART 1 +#define CFG_MX31_UART1 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.23.168 +#define CONFIG_SERVERIP 192.168.23.2 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ + "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ + "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ + "tftpboot 0x80000000 uImage-mx31; bootm\0" \ + "prg_uboot=tftpboot 0x80000000 u-boot-mx31ads.bin; " \ + "protect off 0xa0000000 0xa001ffff; " \ + "erase 0xa0000000 0xa001ffff; " \ + "cp.b 0x80000000 0xa0000000 $(filesize)\0" + +#define CONFIG_DRIVER_CS8900 1 +#define CS8900_BASE 0xb4020300 +#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0 /* memtest works on */ +#define CFG_MEMTEST_END 0x10000 + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR CSD0_BASE /* default load address */ + +#define CFG_HZ 32000 + +#define CONFIG_CMDLINE_EDITING 1 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_FLASH_BASE CS0_BASE +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 262 /* max number of sectors on one chip */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ +#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128KiB */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SECT_SIZE (32 * 1024) +#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +/* S29WS256N NOR flash has 4 32KiB small sectors at beginning and end. + * The rest of 32MiB is in 128KiB big sectors. + * U-Boot occupies the low 4 sectors, + * if we put environment next to it, we will have to occupy 128KiB for it. + * Putting it at the top of flash we use only 32KiB. */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 32 * 1024 * 1024 - CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#if 0 /* Doesn't work yet, work in progress */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes(~10x faster)*/ +#endif +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +/* + * JFFS2 partitions + */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/pmdra.h b/include/configs/pmdra.h new file mode 100644 index 0000000..e170ee9 --- /dev/null +++ b/include/configs/pmdra.h @@ -0,0 +1,186 @@ +/* + * Copyright (C) 2008 Prodrive BV <pieter.voorthijsen@prodrive.nl> + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/*=======*/ +/* Board */ +/*=======*/ +#define CFG_PMDRA +#define CFG_NAND_LARGEPAGE +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ ((CFG_HZ_CLOCK * (CFG_DAVINCI_PLL1_PLLM + 1))/2) +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +#define CFG_DAVINCI_PINMUX_0 0x00000c1f +#define CFG_DAVINCI_WAITCFG 0x10000000 +#define CFG_DAVINCI_ACFG2 0x00460385 /* NOR CE Config */ +#define CFG_DAVINCI_ACFG3 0x0822218c /* NAND CE Config */ +#define CFG_DAVINCI_ACFG4 0x3ffffffd +#define CFG_DAVINCI_ACFG5 0x3ffffffd +#define CFG_DAVINCI_NANDCE 3 /* Use CE3 for NAND */ +#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */ +#define CFG_DAVINCI_SDREF 0x000005c3 +#define CFG_DAVINCI_SDCFG 0x00178832 /* 8 banks , CAS = 4*/ +#define CFG_DAVINCI_SDTIM0 0x28923211 +#define CFG_DAVINCI_SDTIM1 0x0016c722 +#define CFG_DAVINCI_MMARG_BRF0 0x00444400 +/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */ +#define CFG_DAVINCI_PLL1_PLLM 0x12 +#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */ +#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */ +#define CFG_DAVINCI_PLL2_DIV2 0x01 +/*====================================================*/ +/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ +/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ +/*====================================================*/ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */ +#define DDR_8BANKS /* 8-bank DDR2 (256MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_COM2 0x01c20800 /* Base address of UART2 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 50000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#define CFG_USE_NAND +#define CFG_NAND_BASE 0x04000000 +#undef CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define DEF_BOOTM "" +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) +#define CFG_ENV_OFFSET (CFG_ENV_ADDR) +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster)*/ +#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ +#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ +#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ +#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ) +#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */ +#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size INTEL Flash */ +#define CFG_FLASH_PROTECTION 1 +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +#define CONFIG_ENV_OVERWRITE +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 2 +#define CONFIG_BOOTARGS \ + "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "run nand" +#define CONFIG_EXTRA_ENV_SETTINGS "ethaddr=00:11:22:33:44:55\n" +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#define CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h new file mode 100644 index 0000000..c20baca --- /dev/null +++ b/include/configs/r2dplus.h @@ -0,0 +1,150 @@ +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7751 1 +#define CONFIG_CPU_SH_TYPE_R 1 +#define CONFIG_R2DPLUS 1 +#define __LITTLE_ENDIAN__ 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DFL +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_IDE +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION + +/* SCIF */ +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_SCIF1 1 +#define BOARD_LATE_INIT 1 + +#define CONFIG_BOOTDELAY -1 +#define CONFIG_BOOTARGS "console=ttySC0,115200" +#define CONFIG_ENV_OVERWRITE 1 + +/* Network setting */ +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_IPADDR 10.0.192.51 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 + +/* SDRAM */ +#define CFG_SDRAM_BASE (0x8C000000) +#define CFG_SDRAM_SIZE (0x04000000) + +#define CFG_LONGHELP +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 +#define CFG_PBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } + +#define CFG_MEMTEST_START (CFG_SDRAM_BASE) +#define CFG_MEMTEST_END (TEXT_BASE - 0x100000) + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024) +/* Address of u-boot image in Flash */ +#define CFG_MONITOR_BASE (CFG_FLASH_BASE) +#define CFG_MONITOR_LEN (128 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CFG_MALLOC_LEN (256 * 1024) +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* + * NOR Flash + */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER + +#if defined(CONFIG_R2DPLUS_OLD) +#define CFG_FLASH_BASE (0xA0000000) +#define CFG_MAX_FLASH_BANKS (1) /* Max number of + * Flash memory banks + */ +#define CFG_MAX_FLASH_SECT 142 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#else /* CONFIG_R2DPLUS_OLD */ + +#define CFG_FLASH_BASE (0xA0000000) +#define CFG_FLASH_CFI_WIDTH 0x04 /* 32bit */ +#define CFG_MAX_FLASH_BANKS (2) +#define CFG_MAX_FLASH_SECT 270 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ + CFG_FLASH_BASE + 0x100000,\ + CFG_FLASH_BASE + 0x400000,\ + CFG_FLASH_BASE + 0x700000, } +#endif /* CONFIG_R2DPLUS_OLD */ + +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 120000 +#define CFG_FLASH_WRITE_TOUT 500 + +/* + * SuperH Clock setting + */ +#define CONFIG_SYS_CLK_FREQ 60000000 +#define TMU_CLK_DIVIDER 4 +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CFG_PLL_SETTLING_TIME 100/* in us */ + +/* + * IDE support + */ +#define CONFIG_IDE_RESET 1 +#define CFG_PIO_MODE 1 +#define CFG_IDE_MAXBUS 1 /* IDE bus */ +#define CFG_IDE_MAXDEVICE 1 +#define CFG_ATA_BASE_ADDR 0xb4000000 +#define CFG_ATA_STRIDE 2 /* 1bit shift */ +#define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */ +#define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */ +#define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */ + +/* + * SuperH PCI Bridge Configration + */ +#define CONFIG_PCI +#define CONFIG_SH4_PCI +#define CONFIG_SH7751_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW 1 +#define __io +#define __mem_pci + +#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ +#define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */ +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */ + +/* + * Network device (RTL8139) support + */ +#define CONFIG_NET_MULTI +#define CONFIG_RTL8139 +#define _IO_BASE 0x00000000 +#define KSEG1ADDR(x) (x) + +#endif /* __CONFIG_H */ diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h new file mode 100644 index 0000000..42787f4 --- /dev/null +++ b/include/configs/r7780mp.h @@ -0,0 +1,165 @@ +/* + * Configuation settings for the Renesas R7780MP board + * + * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __R7780RP_H +#define __R7780RP_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4A 1 +#define CONFIG_CPU_SH7780 1 +#define CONFIG_R7780MP 1 +#define __LITTLE_ENDIAN 1 + +/* + * Command line configuration. + */ +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_ENV +#define CONFIG_CMD_NFS +#define CONFIG_CMD_IDE +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION + +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_SCIF0 1 + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC0,115200" +#define CONFIG_ENV_OVERWRITE 1 + +/* check for keypress on bootdelay==0 */ +/*#define CONFIG_ZERO_BOOTDELAY_CHECK*/ + +/* Network setting */ +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_IPADDR 10.0.192.82 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 + +#define CFG_SDRAM_BASE (0x08000000) +#define CFG_SDRAM_SIZE (128 * 1024 * 1024) + +#define CFG_LONGHELP +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 +#define CFG_PBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } + +#define CFG_MEMTEST_START (CFG_SDRAM_BASE) +#define CFG_MEMTEST_END (TEXT_BASE - 0x100000) + +/* NOR Flash (S29PL127J60TFI130) */ +#define CFG_FLASH_BASE (0xA0000000) +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT +#define CFG_MAX_FLASH_BANKS (2) +#define CFG_MAX_FLASH_SECT 270 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ + CFG_FLASH_BASE + 0x100000,\ + CFG_FLASH_BASE + 0x400000,\ + CFG_FLASH_BASE + 0x700000, } + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) +/* Address of u-boot image in Flash */ +#define CFG_MONITOR_BASE (CFG_FLASH_BASE) +#define CFG_MONITOR_LEN (112 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CFG_MALLOC_LEN (256 * 1024) + +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) +#define CFG_RX_ETH_BUFFER (8) + +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#undef CFG_FLASH_CFI_BROKEN_TABLE +#undef CFG_FLASH_QUIET_TEST +/* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_EMPTY_INFO + +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE (16 * 1024) +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 120000 +#define CFG_FLASH_WRITE_TOUT 500 + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define TMU_CLK_DIVIDER 4 +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +/* PCI Controller */ +#if defined(CONFIG_CMD_PCI) +#define CONFIG_PCI +#define CONFIG_SH4_PCI +#define CONFIG_SH7780_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW 1 +#define __io +#define __mem_pci + +#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ + +#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ +#endif /* CONFIG_CMD_PCI */ + +#if defined(CONFIG_CMD_NET) +/* #define CONFIG_NET_MULTI + #define CONFIG_RTL8169 */ +/* AX88696L Support(NE2000 base chip) */ +#define CONFIG_DRIVER_NE2000 +#define CONFIG_DRIVER_AX88796L +#define CONFIG_DRIVER_NE2000_BASE 0xA4100000 +#endif + +/* Compact flash Support */ +#if defined(CONFIG_CMD_IDE) +#define CONFIG_IDE_RESET 1 +#define CFG_PIO_MODE 1 +#define CFG_IDE_MAXBUS 1 /* IDE bus */ +#define CFG_IDE_MAXDEVICE 1 +#define CFG_ATA_BASE_ADDR 0xb4000000 +#define CFG_ATA_STRIDE 2 /* 1bit shift */ +#define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */ +#define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */ +#define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */ +#endif /* CONFIG_CMD_IDE */ + +#endif /* __R7780RP_H */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index dfa8779..555316f 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -221,6 +221,8 @@ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ #endif +#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ /* * I2C @@ -275,7 +277,7 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ - "addmisc=setenv bootargs ${bootargs} mem=${mem}\0" \ + "addmisc=setenv bootargs ${bootargs}\0" \ "flash_nfs=run nfsargs addip addtty addmisc;" \ "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip addtty addmisc;" \ diff --git a/include/linux/stat.h b/include/linux/stat.h index 37f2924..2ce1c25 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -126,7 +126,7 @@ struct stat { #endif /* __MIPS__ */ -#if defined(__AVR32__) +#if defined(__AVR32__) || defined(__SH__) struct stat { unsigned long st_dev; @@ -149,7 +149,7 @@ struct stat { unsigned long __unused5; }; -#endif /* __AVR32__ */ +#endif /* __AVR32__ || __SH__ */ #ifdef __cplusplus } diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 4ee38aa..d2e1e2b 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -48,71 +48,36 @@ /* SPRIDR - System Part and Revision ID Register */ -#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification */ -#define SPRIDR_REVID 0x0000FFFF /* Revision Identification */ - -#define SPR_8349E_REV10 0x80300100 -#define SPR_8349_REV10 0x80310100 -#define SPR_8347E_REV10_TBGA 0x80320100 -#define SPR_8347_REV10_TBGA 0x80330100 -#define SPR_8347E_REV10_PBGA 0x80340100 -#define SPR_8347_REV10_PBGA 0x80350100 -#define SPR_8343E_REV10 0x80360100 -#define SPR_8343_REV10 0x80370100 - -#define SPR_8349E_REV11 0x80300101 -#define SPR_8349_REV11 0x80310101 -#define SPR_8347E_REV11_TBGA 0x80320101 -#define SPR_8347_REV11_TBGA 0x80330101 -#define SPR_8347E_REV11_PBGA 0x80340101 -#define SPR_8347_REV11_PBGA 0x80350101 -#define SPR_8343E_REV11 0x80360101 -#define SPR_8343_REV11 0x80370101 - -#define SPR_8349E_REV31 0x80300300 -#define SPR_8349_REV31 0x80310300 -#define SPR_8347E_REV31_TBGA 0x80320300 -#define SPR_8347_REV31_TBGA 0x80330300 -#define SPR_8347E_REV31_PBGA 0x80340300 -#define SPR_8347_REV31_PBGA 0x80350300 -#define SPR_8343E_REV31 0x80360300 -#define SPR_8343_REV31 0x80370300 - -#define SPR_8360E_REV10 0x80480010 -#define SPR_8360_REV10 0x80490010 -#define SPR_8360E_REV11 0x80480011 -#define SPR_8360_REV11 0x80490011 -#define SPR_8360E_REV12 0x80480012 -#define SPR_8360_REV12 0x80490012 -#define SPR_8360E_REV20 0x80480020 -#define SPR_8360_REV20 0x80490020 -#define SPR_8360E_REV21 0x80480021 -#define SPR_8360_REV21 0x80490021 - -#define SPR_8323E_REV10 0x80620010 -#define SPR_8323_REV10 0x80630010 -#define SPR_8321E_REV10 0x80660010 -#define SPR_8321_REV10 0x80670010 -#define SPR_8323E_REV11 0x80620011 -#define SPR_8323_REV11 0x80630011 -#define SPR_8321E_REV11 0x80660011 -#define SPR_8321_REV11 0x80670011 - -#define SPR_8313E_REV10 0x80B00010 -#define SPR_8313_REV10 0x80B10010 -#define SPR_8311E_REV10 0x80B20010 -#define SPR_8311_REV10 0x80B30010 -#define SPR_8315E_REV10 0x80B40010 -#define SPR_8315_REV10 0x80B50010 -#define SPR_8314E_REV10 0x80B60010 -#define SPR_8314_REV10 0x80B70010 - -#define SPR_8379E_REV10 0x80C20010 -#define SPR_8379_REV10 0x80C30010 -#define SPR_8378E_REV10 0x80C40010 -#define SPR_8378_REV10 0x80C50010 -#define SPR_8377E_REV10 0x80C60010 -#define SPR_8377_REV10 0x80C70010 +#define SPRIDR_PARTID 0xFFFF0000 /* Part Id */ +#define SPRIDR_REVID 0x0000FFFF /* Revision Id */ + +#if defined(CONFIG_MPC834X) +#define REVID_MAJOR(spridr) ((spridr & 0x0000FF00) >> 8) +#define REVID_MINOR(spridr) (spridr & 0x000000FF) +#else +#define REVID_MAJOR(spridr) ((spridr & 0x000000F0) >> 4) +#define REVID_MINOR(spridr) (spridr & 0x0000000F) +#endif + +#define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16) +#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) /* has SEC */ + +#define SPR_8311 0x80B2 +#define SPR_8313 0x80B0 +#define SPR_8314 0x80B6 +#define SPR_8315 0x80B4 +#define SPR_8321 0x8066 +#define SPR_8323 0x8062 +#define SPR_8343 0x8036 +#define SPR_8347_TBGA_ 0x8032 +#define SPR_8347_PBGA_ 0x8034 +#define SPR_8349 0x8030 +#define SPR_8358_TBGA_ 0x804A +#define SPR_8358_PBGA_ 0x804E +#define SPR_8360 0x8048 +#define SPR_8377 0x80C6 +#define SPR_8378 0x80C4 +#define SPR_8379 0x80C2 /* SPCR - System Priority Configuration Register */ diff --git a/include/ppc440.h b/include/ppc440.h index 10517cb..642d1de 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -2023,9 +2023,13 @@ #define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */ #define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */ #define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table pointer reg */ +#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table pointer reg */ +#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table pointer reg */ #define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */ #define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */ #define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */ +#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */ +#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */ #endif /* CONFIG_440GX */ diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h index 0208454..89ff26f 100644 --- a/include/ppc4xx_enet.h +++ b/include/ppc4xx_enet.h @@ -213,6 +213,10 @@ typedef struct emac_4xx_hw_st { #define RGMII_FER (RGMII_BASE + 0x00) #define RGMII_SSR (RGMII_BASE + 0x04) +#if defined(CONFIG_460GT) +#define RGMII1_BASE_OFFSET 0x100 +#endif + /* RGMII Function Enable (FER) Register Bit Definitions */ /* Note: for EMAC 2 and 3 only, 440GX only */ #define RGMII_FER_DIS (0x00) |