diff options
Diffstat (limited to 'include')
133 files changed, 3357 insertions, 1272 deletions
diff --git a/include/_exports.h b/include/_exports.h index 349a3c5..5944703 100644 --- a/include/_exports.h +++ b/include/_exports.h @@ -1,32 +1,73 @@ /* - * You do not need to use #ifdef around functions that may not exist + * You need to use #ifdef around functions that may not exist * in the final configuration (such as i2c). + * use a dummyfunction as first parameter to EXPORT_FUNC. + * As an example see the CONFIG_CMD_I2C section below */ -EXPORT_FUNC(get_version) -EXPORT_FUNC(getc) -EXPORT_FUNC(tstc) -EXPORT_FUNC(putc) -EXPORT_FUNC(puts) -EXPORT_FUNC(printf) -EXPORT_FUNC(install_hdlr) -EXPORT_FUNC(free_hdlr) -EXPORT_FUNC(malloc) -EXPORT_FUNC(free) -EXPORT_FUNC(udelay) -EXPORT_FUNC(get_timer) -EXPORT_FUNC(vprintf) -EXPORT_FUNC(do_reset) -EXPORT_FUNC(getenv) -EXPORT_FUNC(setenv) -EXPORT_FUNC(simple_strtoul) -EXPORT_FUNC(strict_strtoul) -EXPORT_FUNC(simple_strtol) -EXPORT_FUNC(strcmp) -EXPORT_FUNC(i2c_write) -EXPORT_FUNC(i2c_read) -EXPORT_FUNC(spi_init) -EXPORT_FUNC(spi_setup_slave) -EXPORT_FUNC(spi_free_slave) -EXPORT_FUNC(spi_claim_bus) -EXPORT_FUNC(spi_release_bus) -EXPORT_FUNC(spi_xfer) +#ifndef EXPORT_FUNC +#define EXPORT_FUNC(a, b, c, ...) +#endif + EXPORT_FUNC(get_version, unsigned long, get_version, void) + EXPORT_FUNC(getc, int, getc, void) + EXPORT_FUNC(tstc, int, tstc, void) + EXPORT_FUNC(putc, void, putc, const char) + EXPORT_FUNC(puts, void, puts, const char *) + EXPORT_FUNC(printf, int, printf, const char*, ...) +#if defined(CONFIG_X86) || defined(CONFIG_PPC) + EXPORT_FUNC(irq_install_handler, void, install_hdlr, + int, interrupt_handler_t, void*) + + EXPORT_FUNC(irq_free_handler, void, free_hdlr, int) +#else + EXPORT_FUNC(dummy, void, install_hdlr, void) + EXPORT_FUNC(dummy, void, free_hdlr, void) +#endif + EXPORT_FUNC(malloc, void *, malloc, size_t) + EXPORT_FUNC(free, void, free, void *) + EXPORT_FUNC(udelay, void, udelay, unsigned long) + EXPORT_FUNC(get_timer, unsigned long, get_timer, unsigned long) + EXPORT_FUNC(vprintf, int, vprintf, const char *, va_list) + EXPORT_FUNC(do_reset, int, do_reset, cmd_tbl_t *, + int , int , char * const []) + EXPORT_FUNC(getenv, char *, getenv, const char*) + EXPORT_FUNC(setenv, int, setenv, const char *, const char *) + EXPORT_FUNC(simple_strtoul, unsigned long, simple_strtoul, + const char *, char **, unsigned int) + EXPORT_FUNC(strict_strtoul, int, strict_strtoul, + const char *, unsigned int , unsigned long *) + EXPORT_FUNC(simple_strtol, long, simple_strtol, + const char *, char **, unsigned int) + EXPORT_FUNC(strcmp, int, strcmp, const char *cs, const char *ct) +#if defined(CONFIG_CMD_I2C) && \ + (!defined(CONFIG_DM_I2C) || defined(CONFIG_DM_I2C_COMPAT)) + EXPORT_FUNC(i2c_write, int, i2c_write, uchar, uint, int , uchar * , int) + EXPORT_FUNC(i2c_read, int, i2c_read, uchar, uint, int , uchar * , int) +#else + EXPORT_FUNC(dummy, void, i2c_write, void) + EXPORT_FUNC(dummy, void, i2c_read, void) +#endif + +#if !defined(CONFIG_CMD_SPI) || defined(CONFIG_DM_SPI) + EXPORT_FUNC(dummy, void, spi_init, void) + EXPORT_FUNC(dummy, void, spi_setup_slave, void) + EXPORT_FUNC(dummy, void, spi_free_slave, void) +#else + EXPORT_FUNC(spi_init, void, spi_init, void) + EXPORT_FUNC(spi_setup_slave, struct spi_slave *, spi_setup_slave, + unsigned int, unsigned int, unsigned int, unsigned int) + EXPORT_FUNC(spi_free_slave, void, spi_free_slave, struct spi_slave *) +#endif +#ifndef CONFIG_CMD_SPI + EXPORT_FUNC(dummy, void, spi_claim_bus, void) + EXPORT_FUNC(dummy, void, spi_release_bus, void) + EXPORT_FUNC(dummy, void, spi_xfer, void) +#else + EXPORT_FUNC(spi_claim_bus, int, spi_claim_bus, struct spi_slave *) + EXPORT_FUNC(spi_release_bus, void, spi_release_bus, struct spi_slave *) + EXPORT_FUNC(spi_xfer, int, spi_xfer, struct spi_slave *, + unsigned int, const void *, void *, unsigned long) +#endif + EXPORT_FUNC(ustrtoul, unsigned long, ustrtoul, + const char *, char **, unsigned int) + EXPORT_FUNC(ustrtoull, unsigned long long, ustrtoull, + const char *, char **, unsigned int) diff --git a/include/asm-generic/atomic-long.h b/include/asm-generic/atomic-long.h new file mode 100644 index 0000000..d0469ef --- /dev/null +++ b/include/asm-generic/atomic-long.h @@ -0,0 +1,260 @@ +#ifndef _ASM_GENERIC_ATOMIC_LONG_H +#define _ASM_GENERIC_ATOMIC_LONG_H +/* + * Copyright (C) 2005 Silicon Graphics, Inc. + * Christoph Lameter + * + * Allows to provide arch independent atomic definitions without the need to + * edit all arch specific atomic.h files. + */ + +#include <asm/types.h> + +/* + * Suppport for atomic_long_t + * + * Casts for parameters are avoided for existing atomic functions in order to + * avoid issues with cast-as-lval under gcc 4.x and other limitations that the + * macros of a platform may have. + */ + +#if BITS_PER_LONG == 64 + +typedef atomic64_t atomic_long_t; + +#define ATOMIC_LONG_INIT(i) ATOMIC64_INIT(i) + +static inline long atomic_long_read(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return (long)atomic64_read(v); +} + +static inline void atomic_long_set(atomic_long_t *l, long i) +{ + atomic64_t *v = (atomic64_t *)l; + + atomic64_set(v, i); +} + +static inline void atomic_long_inc(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + atomic64_inc(v); +} + +static inline void atomic_long_dec(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + atomic64_dec(v); +} + +static inline void atomic_long_add(long i, atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + atomic64_add(i, v); +} + +static inline void atomic_long_sub(long i, atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + atomic64_sub(i, v); +} + +static inline int atomic_long_sub_and_test(long i, atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return atomic64_sub_and_test(i, v); +} + +static inline int atomic_long_dec_and_test(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return atomic64_dec_and_test(v); +} + +static inline int atomic_long_inc_and_test(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return atomic64_inc_and_test(v); +} + +static inline int atomic_long_add_negative(long i, atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return atomic64_add_negative(i, v); +} + +static inline long atomic_long_add_return(long i, atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return (long)atomic64_add_return(i, v); +} + +static inline long atomic_long_sub_return(long i, atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return (long)atomic64_sub_return(i, v); +} + +static inline long atomic_long_inc_return(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return (long)atomic64_inc_return(v); +} + +static inline long atomic_long_dec_return(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return (long)atomic64_dec_return(v); +} + +static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u) +{ + atomic64_t *v = (atomic64_t *)l; + + return (long)atomic64_add_unless(v, a, u); +} + +#define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l)) + +#define atomic_long_cmpxchg(l, old, new) \ + (atomic64_cmpxchg((atomic64_t *)(l), (old), (new))) +#define atomic_long_xchg(v, new) \ + (atomic64_xchg((atomic64_t *)(v), (new))) + +#else /* BITS_PER_LONG == 64 */ + +typedef atomic_t atomic_long_t; + +#define ATOMIC_LONG_INIT(i) ATOMIC_INIT(i) +static inline long atomic_long_read(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return (long)atomic_read(v); +} + +static inline void atomic_long_set(atomic_long_t *l, long i) +{ + atomic_t *v = (atomic_t *)l; + + atomic_set(v, i); +} + +static inline void atomic_long_inc(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + atomic_inc(v); +} + +static inline void atomic_long_dec(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + atomic_dec(v); +} + +static inline void atomic_long_add(long i, atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + atomic_add(i, v); +} + +static inline void atomic_long_sub(long i, atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + atomic_sub(i, v); +} + +#ifndef __UBOOT__ +static inline int atomic_long_sub_and_test(long i, atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return atomic_sub_and_test(i, v); +} + +static inline int atomic_long_dec_and_test(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return atomic_dec_and_test(v); +} + +static inline int atomic_long_inc_and_test(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return atomic_inc_and_test(v); +} + +static inline int atomic_long_add_negative(long i, atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return atomic_add_negative(i, v); +} + +static inline long atomic_long_add_return(long i, atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return (long)atomic_add_return(i, v); +} + +static inline long atomic_long_sub_return(long i, atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return (long)atomic_sub_return(i, v); +} + +static inline long atomic_long_inc_return(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return (long)atomic_inc_return(v); +} + +static inline long atomic_long_dec_return(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return (long)atomic_dec_return(v); +} + +static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u) +{ + atomic_t *v = (atomic_t *)l; + + return (long)atomic_add_unless(v, a, u); +} + +#define atomic_long_inc_not_zero(l) atomic_inc_not_zero((atomic_t *)(l)) + +#define atomic_long_cmpxchg(l, old, new) \ + (atomic_cmpxchg((atomic_t *)(l), (old), (new))) +#define atomic_long_xchg(v, new) \ + (atomic_xchg((atomic_t *)(v), (new))) +#endif /* __UBOOT__ */ + +#endif /* BITS_PER_LONG == 64 */ + +#endif /* _ASM_GENERIC_ATOMIC_LONG_H */ diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 3d14d5f..6747619 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -73,7 +73,7 @@ typedef struct global_data { const void *fdt_blob; /* Our device tree, NULL if none */ void *new_fdt; /* Relocated FDT */ unsigned long fdt_size; /* Space reserved for relocated FDT */ - void **jt; /* jump table */ + struct jt_funcs *jt; /* jump table */ char env_buf[32]; /* buffer for getenv() before reloc. */ #ifdef CONFIG_TRACE void *trace_buff; /* The trace buffer */ diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 36a36c6..3b96b82 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -10,6 +10,15 @@ /* * Generic GPIO API for U-Boot * + * -- + * NB: This is deprecated. Please use the driver model functions instead: + * + * - gpio_request_by_name() + * - dm_gpio_get_value() etc. + * + * For now we need a dm_ prefix on some functions to avoid name collision. + * -- + * * GPIOs are numbered from 0 to GPIO_COUNT-1 which value is defined * by the SOC/architecture. * @@ -26,6 +35,7 @@ */ /** + * @deprecated Please use driver model instead * Request a GPIO. This should be called before any of the other functions * are used on this GPIO. * @@ -39,6 +49,7 @@ int gpio_request(unsigned gpio, const char *label); /** + * @deprecated Please use driver model instead * Stop using the GPIO. This function should not alter pin configuration. * * @param gpio GPIO number @@ -47,6 +58,7 @@ int gpio_request(unsigned gpio, const char *label); int gpio_free(unsigned gpio); /** + * @deprecated Please use driver model instead * Make a GPIO an input. * * @param gpio GPIO number @@ -55,6 +67,7 @@ int gpio_free(unsigned gpio); int gpio_direction_input(unsigned gpio); /** + * @deprecated Please use driver model instead * Make a GPIO an output, and set its value. * * @param gpio GPIO number @@ -64,6 +77,7 @@ int gpio_direction_input(unsigned gpio); int gpio_direction_output(unsigned gpio, int value); /** + * @deprecated Please use driver model instead * Get a GPIO's value. This will work whether the GPIO is an input * or an output. * @@ -73,6 +87,7 @@ int gpio_direction_output(unsigned gpio, int value); int gpio_get_value(unsigned gpio); /** + * @deprecated Please use driver model instead * Set an output GPIO's value. The GPIO must already be an output or * this function may have no effect. * @@ -95,6 +110,34 @@ enum gpio_func_t { struct udevice; +struct gpio_desc { + struct udevice *dev; /* Device, NULL for invalid GPIO */ + unsigned long flags; +#define GPIOD_REQUESTED (1 << 0) /* Requested/claimed */ +#define GPIOD_IS_OUT (1 << 1) /* GPIO is an output */ +#define GPIOD_IS_IN (1 << 2) /* GPIO is an output */ +#define GPIOD_ACTIVE_LOW (1 << 3) /* value has active low */ +#define GPIOD_IS_OUT_ACTIVE (1 << 4) /* set output active */ + + uint offset; /* GPIO offset within the device */ + /* + * We could consider adding the GPIO label in here. Possibly we could + * use this structure for internal GPIO information. + */ +}; + +/** + * dm_gpio_is_valid() - Check if a GPIO is gpio_is_valie + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return true if valid, false if not + */ +static inline bool dm_gpio_is_valid(struct gpio_desc *desc) +{ + return desc->dev != NULL; +} + /** * gpio_get_status() - get the current GPIO status as a string * @@ -106,6 +149,8 @@ struct udevice; * which means this is GPIO bank b, offset 4, currently set to input, current * value 1, [x] means that it is requested and the owner is 'sdmmc_cd' * + * TODO(sjg@chromium.org): This should use struct gpio_desc + * * @dev: Device to check * @offset: Offset of device GPIO to check * @buf: Place to put string @@ -118,6 +163,8 @@ int gpio_get_status(struct udevice *dev, int offset, char *buf, int buffsize); * * Note this returns GPIOF_UNUSED if the GPIO is not requested. * + * TODO(sjg@chromium.org): This should use struct gpio_desc + * * @dev: Device to check * @offset: Offset of device GPIO to check * @namep: If non-NULL, this is set to the nane given when the GPIO @@ -135,6 +182,8 @@ int gpio_get_function(struct udevice *dev, int offset, const char **namep); * Note this does not return GPIOF_UNUSED - it will always return the GPIO * driver's view of a pin function, even if it is not correctly set up. * + * TODO(sjg@chromium.org): This should use struct gpio_desc + * * @dev: Device to check * @offset: Offset of device GPIO to check * @namep: If non-NULL, this is set to the nane given when the GPIO @@ -155,6 +204,8 @@ int gpio_get_raw_function(struct udevice *dev, int offset, const char **namep); int gpio_requestf(unsigned gpio, const char *fmt, ...) __attribute__ ((format (__printf__, 2, 3))); +struct fdtdec_phandle_args; + /** * struct struct dm_gpio_ops - Driver model GPIO operations * @@ -198,6 +249,33 @@ struct dm_gpio_ops { * @return current function - GPIOF_... */ int (*get_function)(struct udevice *dev, unsigned offset); + + /** + * xlate() - Translate phandle arguments into a GPIO description + * + * This function should set up the fields in desc according to the + * information in the arguments. The uclass will have set up: + * + * @desc->dev to @dev + * @desc->flags to 0 + * @desc->offset to the value of the first argument in args, if any, + * otherwise -1 (which is invalid) + * + * This method is optional so if the above defaults suit it can be + * omitted. Typical behaviour is to set up the GPIOD_ACTIVE_LOW flag + * in desc->flags. + * + * Note that @dev is passed in as a parameter to follow driver model + * uclass conventions, even though it is already available as + * desc->dev. + * + * @dev: GPIO device + * @desc: Place to put GPIO description + * @args: Arguments provided in descripion + * @return 0 if OK, -ve on error + */ + int (*xlate)(struct udevice *dev, struct gpio_desc *desc, + struct fdtdec_phandle_args *args); }; /** @@ -268,4 +346,191 @@ int gpio_lookup_name(const char *name, struct udevice **devp, */ unsigned gpio_get_values_as_int(const int *gpio_list); +/** + * gpio_request_by_name() - Locate and request a GPIO by name + * + * This operates by looking up the given list name in the device (device + * tree property) and requesting the GPIO for use. The property must exist + * in @dev's node. + * + * Use @flags to specify whether the GPIO should be an input or output. In + * principle this can also come from the device tree binding but most + * bindings don't provide this information. Specifically, when the GPIO uclass + * calls the xlate() method, it can return default flags, which are then + * ORed with this @flags. + * + * If we find that requesting the GPIO is not always needed we could add a + * new function or a new GPIOD_NO_REQUEST flag. + * + * At present driver model has no reference counting so if one device + * requests a GPIO which subsequently is unbound, the @desc->dev pointer + * will be invalid. However this will only happen if the GPIO device is + * unbound, not if it is removed, so this seems like a reasonable limitation + * for now. There is no real use case for unbinding drivers in normal + * operation. + * + * The device tree binding is doc/device-tree-bindings/gpio/gpio.txt in + * generate terms and each specific device may add additional details in + * a binding file in the same directory. + * + * @dev: Device requesting the GPIO + * @list_name: Name of GPIO list (e.g. "board-id-gpios") + * @index: Index number of the GPIO in that list use request (0=first) + * @desc: Returns GPIO description information. If there is no such + * GPIO, dev->dev will be NULL. + * @flags: Indicates the GPIO input/output settings (GPIOD_...) + * @return 0 if OK, -ENOENT if the GPIO does not exist, -EINVAL if there is + * something wrong with the list, or other -ve for another error (e.g. + * -EBUSY if a GPIO was already requested) + */ +int gpio_request_by_name(struct udevice *dev, const char *list_name, + int index, struct gpio_desc *desc, int flags); + +/** + * gpio_request_list_by_name() - Request a list of GPIOs + * + * Reads all the GPIOs from a list and requetss them. See + * gpio_request_by_name() for additional details. Lists should not be + * misused to hold unrelated or optional GPIOs. They should only be used + * for things like parallel data lines. A zero phandle terminates the list + * the list. + * + * This function will either succeed, and request all GPIOs in the list, or + * fail and request none (it will free already-requested GPIOs in case of + * an error part-way through). + * + * @dev: Device requesting the GPIO + * @list_name: Name of GPIO list (e.g. "board-id-gpios") + * @desc_list: Returns a list of GPIO description information + * @max_count: Maximum number of GPIOs to return (@desc_list must be at least + * this big) + * @flags: Indicates the GPIO input/output settings (GPIOD_...) + * @return number of GPIOs requested, or -ve on error + */ +int gpio_request_list_by_name(struct udevice *dev, const char *list_name, + struct gpio_desc *desc_list, int max_count, + int flags); + +/** + * gpio_get_list_count() - Returns the number of GPIOs in a list + * + * Counts the GPIOs in a list. See gpio_request_by_name() for additional + * details. + * + * @dev: Device requesting the GPIO + * @list_name: Name of GPIO list (e.g. "board-id-gpios") + * @return number of GPIOs (0 for an empty property) or -ENOENT if the list + * does not exist + */ +int gpio_get_list_count(struct udevice *dev, const char *list_name); + +/** + * gpio_request_by_name_nodev() - request GPIOs without a device + * + * This is a version of gpio_request_list_by_name() that does not use a + * device. Avoid it unless the caller is not yet using driver model + */ +int gpio_request_by_name_nodev(const void *blob, int node, + const char *list_name, + int index, struct gpio_desc *desc, int flags); + +/** + * gpio_request_list_by_name_nodev() - request GPIOs without a device + * + * This is a version of gpio_request_list_by_name() that does not use a + * device. Avoid it unless the caller is not yet using driver model + */ +int gpio_request_list_by_name_nodev(const void *blob, int node, + const char *list_name, + struct gpio_desc *desc_list, int max_count, + int flags); + +/** + * dm_gpio_free() - Free a single GPIO + * + * This frees a single GPIOs previously returned from gpio_request_by_name(). + * + * @dev: Device which requested the GPIO + * @desc: GPIO to free + * @return 0 if OK, -ve on error + */ +int dm_gpio_free(struct udevice *dev, struct gpio_desc *desc); + +/** + * gpio_free_list() - Free a list of GPIOs + * + * This frees a list of GPIOs previously returned from + * gpio_request_list_by_name(). + * + * @dev: Device which requested the GPIOs + * @desc: List of GPIOs to free + * @count: Number of GPIOs in the list + * @return 0 if OK, -ve on error + */ +int gpio_free_list(struct udevice *dev, struct gpio_desc *desc, int count); + +/** + * gpio_free_list_nodev() - free GPIOs without a device + * + * This is a version of gpio_free_list() that does not use a + * device. Avoid it unless the caller is not yet using driver model + */ +int gpio_free_list_nodev(struct gpio_desc *desc, int count); + +/** + * dm_gpio_get_value() - Get the value of a GPIO + * + * This is the driver model version of the existing gpio_get_value() function + * and should be used instead of that. + * + * For now, these functions have a dm_ prefix since they conflict with + * existing names. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return GPIO value (0 for inactive, 1 for active) or -ve on error + */ +int dm_gpio_get_value(struct gpio_desc *desc); + +int dm_gpio_set_value(struct gpio_desc *desc, int value); + +/** + * dm_gpio_set_dir() - Set the direction for a GPIO + * + * This sets up the direction according tot the provided flags. It will do + * nothing unless the direction is actually specified. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return 0 if OK, -ve on error + */ +int dm_gpio_set_dir(struct gpio_desc *desc); + +/** + * dm_gpio_set_dir_flags() - Set direction using specific flags + * + * This is like dm_gpio_set_dir() except that the flags value is provided + * instead of being used from desc->flags. This is needed because in many + * cases the GPIO description does not include direction information. + * Note that desc->flags is updated by this function. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @flags: New flags to use + * @return 0 if OK, -ve on error, in which case desc->flags is not updated + */ +int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags); + +/** + * gpio_get_number() - Get the global GPIO number of a GPIO + * + * This should only be used for debugging or interest. It returns the nummber + * that should be used for gpio_get_value() etc. to access this GPIO. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return GPIO number, or -ve if not found + */ +int gpio_get_number(struct gpio_desc *desc); + #endif /* _ASM_GENERIC_GPIO_H_ */ diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index aef39d7..a63a87a 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -32,6 +32,10 @@ typedef struct bd_info { unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ +#ifdef CONFIG_AVR32 + unsigned char bi_phy_id[4]; /* PHY address for ATAG_ETHERNET */ + unsigned long bi_board_number;/* ATAG_BOARDINFO */ +#endif #ifdef CONFIG_ARM unsigned long bi_arm_freq; /* arm frequency */ unsigned long bi_dsp_freq; /* dsp core frequency */ diff --git a/include/atmel_lcd.h b/include/atmel_lcd.h new file mode 100644 index 0000000..fa8aa29 --- /dev/null +++ b/include/atmel_lcd.h @@ -0,0 +1,38 @@ +/* + * atmel_lcd.h - Atmel LCD Controller structures + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ATMEL_LCD_H_ +#define _ATMEL_LCD_H_ + +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 640) */ + ushort vl_row; /* Number of rows (i.e. 480) */ + u_long vl_clk; /* pixel clock in ps */ + + /* LCD configuration register */ + u_long vl_sync; /* Horizontal / vertical sync */ + u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ + u_long vl_tft; /* 0 = passive, 1 = TFT */ + u_long vl_cont_pol_low; /* contrast polarity is low */ + u_long vl_clk_pol; /* clock polarity */ + + /* Horizontal control register. */ + u_long vl_hsync_len; /* Length of horizontal sync */ + u_long vl_left_margin; /* Time from sync to picture */ + u_long vl_right_margin; /* Time from picture to sync */ + + /* Vertical control register. */ + u_long vl_vsync_len; /* Length of vertical sync */ + u_long vl_upper_margin; /* Time from sync to picture */ + u_long vl_lower_margin; /* Time from picture to sync */ + + u_long mmio; /* Memory mapped registers */ +} vidinfo_t; + +#endif diff --git a/include/axp221.h b/include/axp221.h index 6f24a61..a20e25c 100644 --- a/include/axp221.h +++ b/include/axp221.h @@ -12,7 +12,6 @@ #define AXP223_DEVICE_ADDR 0x3a3 #define AXP223_RUNTIME_ADDR 0x2d -#define AXP223_DEVICE_MODE_DATA 0x7c3e00 /* Page 0 addresses */ #define AXP221_CHIP_ID 0x03 diff --git a/include/bootstage.h b/include/bootstage.h index df13ab2..0276cb3 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -86,9 +86,9 @@ enum bootstage_id { BOOTSTAGE_ID_POST_FAIL_R, /* Post failure reported after reloc */ /* - * This set is reported ony by x86, and the meaning is different. In + * This set is reported only by x86, and the meaning is different. In * this case we are reporting completion of a particular stage. - * This should probably change in he x86 code (which doesn't report + * This should probably change in the x86 code (which doesn't report * errors in any case), but discussion this can perhaps wait until we * have a generic board implementation. */ @@ -194,6 +194,7 @@ enum bootstage_id { BOOTSTAGE_ID_MAIN_CPU_READY, BOOTSTAGE_ID_ACCUM_LCD, + BOOTSTAGE_ID_ACCUM_SCSI, /* a few spare for the user, from here */ BOOTSTAGE_ID_USER, diff --git a/include/common.h b/include/common.h index 4b3e0d3..77c55c6 100644 --- a/include/common.h +++ b/include/common.h @@ -183,6 +183,7 @@ typedef void (interrupt_handler_t)(void *); /* * Function Prototypes */ +int dram_init(void); void hang (void) __attribute__ ((noreturn)); @@ -228,12 +229,13 @@ int run_command_list(const char *cmd, int len, int flag); extern char console_buffer[]; /* arch/$(ARCH)/lib/board.c */ -void board_init_f(ulong); -void board_init_r (gd_t *, ulong) __attribute__ ((noreturn)); -int checkboard (void); -int checkflash (void); -int checkdram (void); -int last_stage_init(void); +void board_init_f(ulong); +void board_init_r(gd_t *, ulong) __attribute__ ((noreturn)); +int checkboard(void); +int show_board_info(void); +int checkflash(void); +int checkdram(void); +int last_stage_init(void); extern ulong monitor_flash_len; int mac_read_from_eeprom(void); extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ @@ -251,6 +253,24 @@ int update_flash_size(int flash_size); int arch_early_init_r(void); /** + * Reserve all necessary stacks + * + * This is used in generic board init sequence in common/board_f.c. Each + * architecture could provide this function to tailor the required stacks. + * + * On entry gd->start_addr_sp is pointing to the suggested top of the stack. + * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures + * require only this can leave it untouched. + * + * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective + * positions of the stack. The stack pointer(s) will be set to this later. + * gd->irq_sp is only required, if the architecture needs it. + * + * @return 0 if no error + */ +__weak int arch_reserve_stacks(void); + +/** * Show the DRAM size in a board-specific way * * This is used by boards to display DRAM information in their own way. diff --git a/include/config_defaults.h b/include/config_defaults.h index 4d49315..ad08c1d 100644 --- a/include/config_defaults.h +++ b/include/config_defaults.h @@ -20,10 +20,4 @@ #define CONFIG_ZLIB 1 #define CONFIG_PARTITIONS 1 -#ifndef CONFIG_SPL_BUILD -#define CONFIG_DM_WARN -#define CONFIG_DM_DEVICE_REMOVE -#define CONFIG_DM_STDIO -#endif - #endif diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index becbe3f..07a0b3b 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -10,10 +10,14 @@ #ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H #define _CONFIG_CMD_DISTRO_BOOTCMD_H +/* We need the part command */ +#define CONFIG_PARTITION_UUIDS +#define CONFIG_CMD_PART + #define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \ "if " #devtypel " dev ${devnum}; then " \ "setenv devtype " #devtypel "; " \ - "run scan_dev_for_boot; " \ + "run scan_dev_for_boot_part; " \ "fi\0" #define BOOTENV_SHARED_BLKDEV(devtypel) \ @@ -110,7 +114,7 @@ #define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \ "bootcmd_dhcp=" \ BOOTENV_RUN_USB_INIT \ - "if dhcp ${scriptaddr} boot.scr.uimg; then " \ + "if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \ "source ${scriptaddr}; " \ "fi\0" #define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \ @@ -154,8 +158,8 @@ BOOTENV_SHARED_IDE \ "boot_prefixes=/ /boot/\0" \ "boot_scripts=boot.scr.uimg boot.scr\0" \ + "boot_script_dhcp=boot.scr.uimg\0" \ BOOTENV_BOOT_TARGETS \ - "bootpart=1\0" \ \ "boot_extlinux=" \ "sysboot ${devtype} ${devnum}:${bootpart} any " \ @@ -186,17 +190,30 @@ "done\0" \ \ "scan_dev_for_boot=" \ - "echo Scanning ${devtype} ${devnum}...; " \ + "echo Scanning ${devtype} ${devnum}:${bootpart}...; " \ "for prefix in ${boot_prefixes}; do " \ "run scan_dev_for_extlinux; " \ "run scan_dev_for_scripts; " \ "done\0" \ \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "for bootpart in ${devplist}; do " \ + "if fstype ${devtype} ${devnum}:${bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + \ BOOT_TARGET_DEVICES(BOOTENV_DEV) \ \ - "bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \ + "distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \ "for target in ${boot_targets}; do " \ "run bootcmd_${target}; " \ "done\0" +#ifndef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTCOMMAND "run distro_bootcmd" +#endif + #endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 0004750..f1c270c 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -19,13 +19,11 @@ #include <configs/ti_am335x_common.h> #ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_FIT # define CONFIG_FIT +#endif # define CONFIG_TIMESTAMP # define CONFIG_LZO -# ifdef CONFIG_ENABLE_VBOOT -# define CONFIG_FIT_SIGNATURE -# define CONFIG_RSA -# endif #endif #define CONFIG_SYS_BOOTM_LEN (16 << 20) @@ -239,6 +237,7 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) /* NAND: driver related configs */ #define CONFIG_NAND_OMAP_GPMC +#define CONFIG_NAND_OMAP_GPMC_PREFETCH #define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 2aea899..73e1b0a 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -20,8 +20,10 @@ */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL +#ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_serial_clock() +#endif #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} diff --git a/include/configs/arcangel4-be.h b/include/configs/arcangel4-be.h deleted file mode 100644 index 76163ab..0000000 --- a/include/configs/arcangel4-be.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_ARCANGEL4_H_ -#define _CONFIG_ARCANGEL4_H_ - -/* - * CPU configuration - */ -#define CONFIG_SYS_BIG_ENDIAN -#define CONFIG_ARC700 -#define CONFIG_ARC_MMU_VER 3 -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ - -/* - * Board configuration - */ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ - -#define CONFIG_ARCH_EARLY_INIT_R - -/* - * Memory configuration - */ -#define CONFIG_SYS_TEXT_BASE 0x81000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 Mb */ - -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */ -#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */ -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - -#define CONFIG_SYS_NO_FLASH - -/* - * UART configuration - * - */ -#define CONFIG_ARC_SERIAL -#define CONFIG_ARC_UART_BASE 0xC0FC1000 -#define CONFIG_BAUDRATE 115200 - -/* - * Command line configuration - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ELF - -#define CONFIG_OF_LIBFDT - -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */ -#define CONFIG_ENV_OFFSET 0 - -/* - * Environment configuration - */ -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyARC0,115200n8" -#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR - -/* - * Console configuration - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "arcangel4# " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -#endif /* _CONFIG_ARCANGEL4_H_ */ diff --git a/include/configs/arcangel4.h b/include/configs/arcangel4.h index 81934a4..5e4097f 100644 --- a/include/configs/arcangel4.h +++ b/include/configs/arcangel4.h @@ -10,23 +10,11 @@ /* * CPU configuration */ -#define CONFIG_ARC700 -#define CONFIG_ARC_MMU_VER 3 -#define CONFIG_SYS_CACHELINE_SIZE 64 #define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ /* - * Board configuration - */ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ - -#define CONFIG_ARCH_EARLY_INIT_R - -/* * Memory configuration */ -#define CONFIG_SYS_TEXT_BASE 0x81000000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 diff --git a/include/configs/aristainetos.h b/include/configs/aristainetos.h index e6a08df..3066fd0 100644 --- a/include/configs/aristainetos.h +++ b/include/configs/aristainetos.h @@ -1,4 +1,5 @@ /* + * (C) Copyright 2015 * (C) Copyright 2014 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * @@ -24,8 +25,7 @@ #include <asm/imx-common/gpio.h> #define CONFIG_MACH_TYPE 4501 -#define CONFIG_MMCROOT "/dev/mmcblk0p2" -#define CONFIG_DEFAULT_FDT_FILE "aristainetos.dtb" +#define CONFIG_MMCROOT "/dev/mmcblk0p1" #define CONFIG_HOSTNAME aristainetos #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) @@ -81,7 +81,6 @@ #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 @@ -101,84 +100,108 @@ #define CONFIG_SYS_TEXT_BASE 0x17800000 #define CONFIG_EXTRA_ENV_SETTINGS \ - "uimage=uImage\0" \ - "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ - "fdt_addr_r=0x11000000\0" \ - "kernel_addr_r=0x12000000\0" \ - "kernel_file=uImage\0" \ - "boot_fdt=try\0" \ - "ip_dyn=yes\0" \ + "script=u-boot.scr\0" \ + "fit_file=/boot/system.itb\0" \ + "loadaddr=0x12000000\0" \ + "fit_addr_r=0x14000000\0" \ + "uboot=/boot/u-boot.imx\0" \ + "uboot_sz=d0000\0" \ + "rescue_sys_addr=f0000\0" \ + "rescue_sys_length=f10000\0" \ + "board_type=aristainetos7@1\0" \ + "panel=lb07wv8\0" \ + "splashpos=m,m\0" \ "console=" CONFIG_CONSOLE_DEV "\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ + "mtdids=nand0=gpmi-nand,nor0=spi3.0\0" \ + "mtdparts=mtdparts=spi3.0:832k(u-boot),64k(env),64k(env-red)," \ + "-(rescue-system);gpmi-nand:-(ubi)\0" \ + "addmisc=setenv bootargs ${bootargs} consoleblank=0\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \ + "default ${board_type}\0" \ + "get_env=mw ${loadaddr} 0 0x20000;" \ + "mmc rescan;" \ + "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \ + "env import -t ${loadaddr}\0" \ + "default_env=mw ${loadaddr} 0 0x20000;" \ + "env export -t ${loadaddr} serial# ethaddr eth1addr " \ + "board_type panel;" \ + "env default -a;" \ + "env import -t ${loadaddr}\0" \ + "loadbootscript=" \ + "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ "mmcpart=1\0" \ - "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcdev=0\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} " \ - "${uimage}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} " \ - "${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs;run loadimage loadfdt fdt_setup;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r};\0" \ - "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-sato-sdk\0" \ - "nfsopts=nfsvers=3 nolock rw\0" \ - "netdev=eth0\0" \ - "fdt_setup=fdt addr ${fdt_addr_r};fdt resize;fdt chosen;fdt board\0"\ - "load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \ - "load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "get_env=mw ${loadaddr} 0x00000000 0x20000;" \ - "tftp ${loadaddr} /tftpboot/aristainetos/env.txt;" \ - "env import -t ${loadaddr}\0" \ - "addmisc=setenv bootargs ${bootargs} maxcpus=1 loglevel=8\0" \ - "bootargs_defaults=setenv bootargs ${console} ${mtdoops} " \ - "${optargs}\0" \ - "net_args=run bootargs_defaults;setenv bootargs ${bootargs} " \ - "root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ - "${hostname}:${netdev}:off\0" \ - "net_nfs=run load_kernel load_fdt;run net_args addmtd addmisc;" \ - "run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "uboot=/tftpboot/aristainetos/u-boot.imx\0" \ - "load_uboot=tftp ${loadaddr} ${uboot}\0" \ - "uboot_sz=c0000\0" \ - "upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \ - "mw.b 10200000 0x00 ${uboot_sz};" \ - "run load_uboot;sf probe;sf erase 0 ${uboot_sz};" \ + "run mmcargs addmtd addmisc set_fit_default;" \ + "bootm ${fit_addr_r}\0" \ + "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ + "${fit_file}\0" \ + "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ + "${uboot}\0" \ + "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \ + "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \ + "setexpr uboot_maxsize ${uboot_sz} - 400;" \ + "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \ + "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \ "sf write ${loadaddr} 400 ${filesize};" \ - "sf read 10200000 400 ${uboot_sz};" \ - "cmp.b ${loadaddr} 10200000 bc000\0" \ - "ubi_prep=ubi part ubi 2048;ubifsmount ubi:kernel\0" \ - "load_kernel_ubi=ubifsload ${kernel_addr_r} uImage\0" \ - "load_fdt_ubi=ubifsload ${fdt_addr_r} aristainetos.dtb\0" \ - "ubi_nfs=run ubiprep load_kernel_ubi load_fdt_ubi;" \ - "run net_args addmtd addmisc;run fdt_setup;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "rootfsname=rootfs\0" \ - "ubi_args=run bootargs_defaults;setenv bootargs ${bootargs} " \ - "ubi.mtd=0,2048 root=ubi0:${rootfsname} rootfstype=ubifs " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ - "${hostname}:${netdev}:off\0" \ - "ubi_ubi=run ubi_prep load_kernel_ubi load_fdt_ubi;" \ - "run bootargs_defaults ubi_args addmtd addmisc;" \ - "run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "ubirootfs_file=/tftpboot/aristainetos/rootfs-minimal.ubifs\0" \ - "upd_ubirootfs=run ubi_prep;tftp ${loadaddr} ${ubirootfs_file};" \ - "ubi write ${loadaddr} rootfs ${filesize}\0" \ - "ksz=800000\0" \ - "rootsz=2000000\0" \ - "usersz=8000000\0" \ - "ubi_make=run ubi_prep;ubi create kernel ${ksz};" \ - "ubi create rootfs ${rootsz};ubi create userfs ${usersz}\0" + "sf read ${cmp_buf} 400 ${uboot_sz};" \ + "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \ + "ubiargs=setenv bootargs console=${console},${baudrate} " \ + "ubi.mtd=0,2048 root=ubi0:rootfs rootfstype=ubifs\0 " \ + "ubiboot=echo Booting from ubi ...; " \ + "run ubiargs addmtd addmisc set_fit_default;" \ + "bootm ${fit_addr_r}\0" \ + "ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \ + "ubifsload ${fit_addr_r} /boot/system.itb; " \ + "imi ${fit_addr_r}\0 " \ + "rescueargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/ram rw\0 " \ + "rescueboot=echo Booting rescue system from NOR ...; " \ + "run rescueargs addmtd addmisc set_fit_default;" \ + "bootm ${fit_addr_r}\0" \ + "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \ + "${rescue_sys_length}; imi ${fit_addr_r}\0 " #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev};" \ "if mmc rescan; then " \ - "run mmcboot;" \ - "else run ubi_ubi; fi" + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run mmc_load_fit; then " \ + "run mmcboot; " \ + "else " \ + "if run ubifs_load_fit; then " \ + "run ubiboot; " \ + "else " \ + "if run rescue_load_fit; then " \ + "run rescueboot; " \ + "else " \ + "echo RESCUE SYSTEM BOOT " \ + "FAILURE;" \ + "fi; " \ + "fi; " \ + "fi; " \ + "fi; " \ + "else " \ + "if run ubifs_load_fit; then " \ + "run ubiboot; " \ + "else " \ + "if run rescue_load_fit; then " \ + "run rescueboot; " \ + "else " \ + "echo RESCUE SYSTEM BOOT FAILURE;" \ + "fi; " \ + "fi; " \ + "fi" #define CONFIG_ARP_TIMEOUT 200UL @@ -227,8 +250,8 @@ #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE #define CONFIG_ENV_SECT_SIZE (0x010000) -#define CONFIG_ENV_OFFSET (0x0c0000) -#define CONFIG_ENV_OFFSET_REDUND (0x0d0000) +#define CONFIG_ENV_OFFSET (0x0d0000) +#define CONFIG_ENV_OFFSET_REDUND (0x0e0000) #define CONFIG_OF_LIBFDT @@ -289,9 +312,6 @@ #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS -#define MTDIDS_DEFAULT "nand0=gpmi-nand" -#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:-(ubi)" - #define CONFIG_MTD_UBI_FASTMAP #define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1 @@ -321,5 +341,4 @@ #define CONFIG_PWM_IMX #define CONFIG_IMX6_PWM_PER_CLK 66000000 - #endif /* __ARISTAINETOS_CONFIG_H */ diff --git a/include/configs/arndale.h b/include/configs/arndale.h index d68993b..3ad4a9b 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -51,8 +51,6 @@ /* PMIC */ #define CONFIG_PMIC #define CONFIG_POWER_I2C -#define CONFIG_POWER_MAX77686 - #define CONFIG_PREBOOT diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index a6a80de..c4b2e16 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -90,7 +90,6 @@ #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_MMC #define CONFIG_CMD_FAT #define CONFIG_CMD_USB 1 @@ -133,14 +132,17 @@ # define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK #endif -/* DataFlash */ #ifndef CONFIG_AT91SAM9G20EK_2MMC +/* DataFlash */ #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH 1 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ #define AT91_SPI_CLK 15000000 +#else +/* Enable MMC. The MCCK is conflicted with DataFlash */ +#define CONFIG_CMD_MMC #endif #ifdef CONFIG_AT91SAM9G20EK diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index b1d4baa..6d8b71d 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -203,11 +203,12 @@ "bootm 0x22000000" #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ -#define CONFIG_ENV_IS_IN_MMC -/* For FAT system, most cases it should be in the reserved sector */ -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_FILE "uboot.env" +#define FAT_ENV_DEVICE_AND_PART "0" +#define CONFIG_ENV_SIZE 0x4000 #endif #ifdef CONFIG_SYS_USE_MMC diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 9c81e31..540e86a 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -143,7 +143,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index 7b4f9cf..35eae76 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -164,7 +164,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 8f3fd0b..a9c064a 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -104,6 +104,10 @@ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY +/* generic board */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R /* * Command line configuration. @@ -158,7 +162,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index bbe0aea..25090a6 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -159,7 +159,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/axs101.h b/include/configs/axs101.h index c61ddd6..5fb8aca 100644 --- a/include/configs/axs101.h +++ b/include/configs/axs101.h @@ -10,22 +10,8 @@ /* * CPU configuration */ -#define CONFIG_ARC700 -#define CONFIG_ARC_MMU_VER 3 -#define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ -/* NAND controller DMA doesn't work correctly with D$ enabled */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Board configuration - */ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ - -#define CONFIG_ARCH_EARLY_INIT_R - #define ARC_FPGA_PERIPHERAL_BASE 0xE0000000 #define ARC_APB_PERIPHERAL_BASE 0xF0000000 #define ARC_DWMMC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x15000) @@ -34,7 +20,6 @@ /* * Memory configuration */ -#define CONFIG_SYS_TEXT_BASE 0x81000000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index 39982ef..2e0e922 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -97,7 +97,7 @@ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_OFFSET 0x4000 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x12000 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) #define ENV_IS_EMBEDDED diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index 8eeb15c..7a1499d 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -11,6 +11,10 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <linux/kconfig.h> + +#define CONFIG_SYS_GENERIC_BOARD + /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ @@ -19,10 +23,10 @@ * and Arches dual (460GT) */ #ifdef CONFIG_CANYONLANDS -#define CONFIG_460EX 1 /* Specific PPC460EX */ +#define CONFIG_460EX /* Specific PPC460EX */ #define CONFIG_HOSTNAME canyonlands #else -#define CONFIG_460GT 1 /* Specific PPC460GT */ +#define CONFIG_460GT /* Specific PPC460GT */ #ifdef CONFIG_GLACIER #define CONFIG_HOSTNAME glacier #else @@ -32,7 +36,7 @@ #endif #endif -#define CONFIG_440 1 +#define CONFIG_440 #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF80000 @@ -45,10 +49,10 @@ #define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_BOARD_TYPES 1 /* support board types */ +#define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */ +#define CONFIG_BOARD_EARLY_INIT_R /* Call board_early_init_r */ +#define CONFIG_MISC_INIT_R /* Call misc_init_r */ +#define CONFIG_BOARD_TYPES /* support board types */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -134,7 +138,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */ +#define CONFIG_SYS_FLASH_CFI_AMD_RESET /* Use AMD (Spansion) reset cmd */ #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ @@ -172,9 +176,9 @@ * I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot * code. */ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x50, 0x51} /* SPD i2c spd addresses*/ -#define CONFIG_DDR_ECC 1 /* with ECC support */ +#define CONFIG_DDR_ECC /* with ECC support */ #define CONFIG_DDR_RQDC_FIXED 0x80000038 /* fixed value for RQDC */ #else /* defined(CONFIG_ARCHES) */ @@ -262,8 +266,8 @@ #define CONFIG_4xx_CONFIG_BLOCKSIZE 16 /* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 1 /* use AD7414 */ +#define CONFIG_DTT_LM75 /* ON Semi's LM75 */ +#define CONFIG_DTT_AD7414 /* use AD7414 */ #define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ #define CONFIG_SYS_DTT_MAX_TEMP 70 #define CONFIG_SYS_DTT_LOW_TEMP -30 @@ -275,14 +279,14 @@ #if !defined(CONFIG_ARCHES) /* RTC configuration */ -#define CONFIG_RTC_M41T62 1 +#define CONFIG_RTC_M41T62 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 #endif /*----------------------------------------------------------------------- * Ethernet *----------------------------------------------------------------------*/ -#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_IBM_EMAC4_V4 #define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 @@ -322,9 +326,9 @@ #define CONFIG_GPCS_PHY2_ADDR 0xC #endif /* !defined(CONFIG_ARCHES) */ -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ -#define CONFIG_PHY_DYNAMIC_ANEG 1 +#define CONFIG_PHY_RESET /* reset phy upon startup */ +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#define CONFIG_PHY_DYNAMIC_ANEG /*----------------------------------------------------------------------- * USB-OHCI diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index f7277eb..4207504 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -21,14 +21,7 @@ #define CONFIG_MACH_TYPE 4273 #ifndef CONFIG_SPL_BUILD -#define CONFIG_DM -#define CONFIG_CMD_DM - -#define CONFIG_DM_GPIO #define CONFIG_CMD_GPIO - -#define CONFIG_DM_SERIAL -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif /* Display information on boot */ @@ -103,97 +96,98 @@ #define CONFIG_ENV_OFFSET (768 * 1024) #define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel=uImage-cm-fx6\0" \ + "stdin=serial,usbkbd\0" \ + "stdout=serial,vga\0" \ + "stderr=serial,vga\0" \ + "panel=HDMI\0" \ "autoload=no\0" \ + "kernel=uImage-cm-fx6\0" \ + "script=boot.scr\0" \ + "dtb=cm-fx6.dtb\0" \ + "bootm_low=18000000\0" \ "loadaddr=0x10800000\0" \ "fdtaddr=0x11000000\0" \ "console=ttymxc3,115200\0" \ "ethprime=FEC0\0" \ - "bootscr=boot.scr\0" \ - "bootm_low=18000000\0" \ "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \ "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \ - "fdtfile=cm-fx6.dtb\0" \ "doboot=bootm ${loadaddr}\0" \ - "loadfdt=false\0" \ + "doloadfdt=false\0" \ "setboottypez=setenv kernel zImage-cm-fx6;" \ "setenv doboot bootz ${loadaddr} - ${fdtaddr};" \ - "setenv loadfdt true;\0" \ + "setenv doloadfdt true;\0" \ "setboottypem=setenv kernel uImage-cm-fx6;" \ "setenv doboot bootm ${loadaddr};" \ - "setenv loadfdt false;\0"\ - "run_eboot=echo Starting EBOOT ...; "\ - "mmc dev ${mmcdev} && " \ - "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \ - "mmcdev=2\0" \ + "setenv doloadfdt false;\0"\ "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ - "loadmmcbootscript=load mmc ${mmcdev} ${loadaddr} ${bootscr}\0" \ - "mmcbootscript=echo Running bootscript from mmc ...; "\ - "source ${loadaddr}\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "root=${mmcroot} " \ - "${video}\0" \ - "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \ - "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "run doboot\0" \ - "satadev=0\0" \ "sataroot=/dev/sda2 rw rootwait\0" \ - "sataargs=setenv bootargs console=${console} " \ - "root=${sataroot} " \ - "${video}\0" \ - "loadsatabootscript=load sata ${satadev} ${loadaddr} ${bootscr}\0" \ - "satabootscript=echo Running bootscript from sata ...; " \ - "source ${loadaddr}\0" \ - "sataloadkernel=load sata ${satadev} ${loadaddr} ${kernel}\0" \ - "sataloadfdt=load sata ${satadev} ${fdtaddr} ${fdtfile}\0" \ - "sataboot=echo Booting from sata ...; "\ - "run sataargs; " \ - "run doboot\0" \ "nandroot=/dev/mtdblock4 rw\0" \ "nandrootfstype=ubifs\0" \ + "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \ + "${video}\0" \ + "sataargs=setenv bootargs console=${console} root=${sataroot} " \ + "${video}\0" \ "nandargs=setenv bootargs console=${console} " \ "root=${nandroot} " \ "rootfstype=${nandrootfstype} " \ "${video}\0" \ - "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${loadaddr} 0 780000; " \ - "if ${loadfdt}; then " \ + "nandboot=if run nandloadkernel; then " \ "run nandloadfdt;" \ - "fi; " \ - "run doboot\0" \ - "boot=mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "if run loadmmcbootscript; then " \ - "run mmcbootscript;" \ - "else " \ - "if run mmcloadkernel; then " \ - "if ${loadfdt}; then " \ - "run mmcloadfdt;" \ - "fi;" \ - "run mmcboot;" \ - "fi;" \ - "fi;" \ + "run setboottypem;" \ + "run storagebootcmd;" \ + "run setboottypez;" \ + "run storagebootcmd;" \ + "fi;\0" \ + "run_eboot=echo Starting EBOOT ...; "\ + "mmc dev 2 && " \ + "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \ + "loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\ + "loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\ + "loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \ + "bootscript=echo Running bootscript from ${storagetype} ...;" \ + "source ${loadaddr};\0" \ + "nandloadkernel=nand read ${loadaddr} 0 780000;\0" \ + "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \ + "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \ + "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \ + "setupnandboot=setenv storagetype nand;\0" \ + "setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \ + "storagebootcmd=echo Booting from ${storagetype} ...;" \ + "run ${storagetype}args; run doboot;\0" \ + "trybootk=if run loadkernel; then " \ + "if ${doloadfdt}; then " \ + "run loadfdt;" \ "fi;" \ - "if sata init; then " \ - "if run loadsatabootscript; then " \ - "run satabootscript;" \ - "else "\ - "if run sataloadkernel; then " \ - "if ${loadfdt}; then " \ - "run sataloadfdt; " \ - "fi;" \ - "run sataboot;" \ - "fi;" \ - "fi;" \ + "run storagebootcmd;" \ + "fi;\0" \ + "trybootsmz=if run loadscript; then " \ + "run bootscript;" \ "fi;" \ - "run nandboot\0" + "run setboottypem;" \ + "run trybootk;" \ + "run setboottypez;" \ + "run trybootk;\0" #define CONFIG_BOOTCOMMAND \ - "run setboottypem; run boot" + "run setupmmcboot;" \ + "mmc dev ${storagedev};" \ + "if mmc rescan; then " \ + "run trybootsmz;" \ + "fi;" \ + "run setupusbboot;" \ + "if usb start; then "\ + "if run loadscript; then " \ + "run bootscript;" \ + "fi;" \ + "fi;" \ + "run setupsataboot;" \ + "if sata init; then " \ + "run trybootsmz;" \ + "fi;" \ + "run setupnandboot;" \ + "run nandboot;" + +#define CONFIG_PREBOOT "usb start" /* SPI */ #define CONFIG_SPI @@ -243,6 +237,9 @@ #define CONFIG_MXC_USB_FLAGS 0 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP +#define CONFIG_SYS_STDIO_DEREGISTER /* I2C */ #define CONFIG_CMD_I2C @@ -281,7 +278,7 @@ /* misc */ #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_STACKSIZE (128 * 1024) -#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ #define CONFIG_OF_BOARD_SETUP @@ -296,4 +293,24 @@ #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) #define CONFIG_SPL_SPI_LOAD +/* Display */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_IPUV3 +#define CONFIG_IPUV3_CLK 260000000 +#define CONFIG_IMX_HDMI +#define CONFIG_IMX_VIDEO_SKIP +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_CONSOLE_MUX +#define CONFIG_VIDEO_SW_CURSOR + +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SOURCE +#define CONFIG_CMD_BMP +#define CONFIG_VIDEO_BMP_RLE8 + +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO + #endif /* __CONFIG_CM_FX6_H */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 9767512..b2a9f35 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -310,6 +310,7 @@ #define CONFIG_LCD #define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SOURCE #define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP #define CONFIG_SCF0403_LCD diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index cb03e33..1683a15 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -11,6 +11,8 @@ * High Level Configuration Options (easy to change) */ #define CONFIG_ARMADA_XP /* SOC Family Name */ +#define CONFIG_DB_784MP_GP /* Board target name for DDR training */ + #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO_LATE @@ -65,4 +67,51 @@ */ #include "mv-common.h" +/* + * Memory layout while starting into the bin_hdr via the + * BootROM: + * + * 0x4000.4000 - 0x4003.4000 headers space (192KiB) + * 0x4000.4030 bin_hdr start address + * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) + * 0x4007.fffc BootROM stack top + * + * The address space between 0x4007.fffc and 0x400f.fff is not locked in + * L2 cache thus cannot be used. + */ + +/* SPL */ +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40004030 +#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE (16 << 10) + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LDSCRIPT "arch/arm/mvebu-common/u-boot-spl.lds" + +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + +/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ +#define CONFIG_SYS_MVEBU_DDR +#define CONFIG_SPD_EEPROM 0x4e + #endif /* _CONFIG_DB_MV7846MP_GP_H */ diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index 1f3ee55..59676ae 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -17,12 +17,6 @@ #include <linux/sizes.h> #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO @@ -42,7 +36,6 @@ #define CONFIG_ENV_OVERWRITE /* Size of malloc() pool before and after relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20)) /* select serial console configuration */ diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index ad63f3c..3ab8d55 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -126,12 +126,13 @@ #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) /* I2C */ -#define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_SYS_I2C + +/* TODO(sjg@chromium.org): Move these two options to Kconfig */ +#define CONFIG_DM_I2C +#define CONFIG_DM_I2C_COMPAT #define CONFIG_CMD_I2C -#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ #define CONFIG_SYS_I2C_S3C24X0 -#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 #define CONFIG_I2C_EDID diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index 9cef0b0..b1b8e1a 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -24,9 +24,6 @@ #define CONFIG_POWER_TPS65090 /* Enable keyboard */ -#define CONFIG_CROS_EC /* CROS_EC protocol */ -#define CONFIG_CROS_EC_KEYB /* CROS_EC keyboard input */ -#define CONFIG_CMD_CROS_EC #define CONFIG_KEYBOARD #endif diff --git a/include/configs/exynos5250-common.h b/include/configs/exynos5250-common.h index 6714313..ae0e5ff 100644 --- a/include/configs/exynos5250-common.h +++ b/include/configs/exynos5250-common.h @@ -28,9 +28,6 @@ #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK -/* PMIC */ -#define CONFIG_POWER_MAX77686 - /* Sound */ #define CONFIG_CMD_SOUND #ifdef CONFIG_CMD_SOUND diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h index 338d3dc..75bff4c 100644 --- a/include/configs/favr-32-ezkit.h +++ b/include/configs/favr-32-ezkit.h @@ -162,7 +162,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/galileo.h b/include/configs/galileo.h new file mode 100644 index 0000000..d745f4e --- /dev/null +++ b/include/configs/galileo.h @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/x86-common.h> + +#define CONFIG_SYS_MONITOR_LEN (1 << 20) +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_X86_SERIAL + +/* ns16550 UART is memory-mapped in Quark SoC */ +#undef CONFIG_SYS_NS16550_PORT_MAPPED + +#define CONFIG_PCI_MEM_BUS 0x90000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x20000000 + +#define CONFIG_PCI_PREF_BUS 0xb0000000 +#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS +#define CONFIG_PCI_PREF_SIZE 0x20000000 + +#define CONFIG_PCI_IO_BUS 0x2000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0xe000 + +#define CONFIG_SYS_EARLY_PCI_INIT +#define CONFIG_PCI_PNP + +#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + +/* SATA is not supported in Quark SoC */ +#undef CONFIG_SCSI_AHCI +#undef CONFIG_CMD_SCSI + +/* Video is not supported in Quark SoC */ +#undef CONFIG_VIDEO +#undef CONFIG_CFB_CONSOLE + +/* SD/MMC support */ +#define CONFIG_MMC +#define CONFIG_SDHCI +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC_SDMA +#define CONFIG_CMD_MMC + +#endif /* __CONFIG_H */ diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index 73534ad..54eb977 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -62,6 +62,10 @@ #define CONFIG_USART_BASE ATMEL_BASE_USART1 #define CONFIG_USART_ID 1 +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R + /* User serviceable stuff */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS @@ -151,7 +155,6 @@ CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 4f137fc..620f950 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -39,7 +39,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* Init Functions */ #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h index 4f0603a..0bc42f1 100644 --- a/include/configs/hammerhead.h +++ b/include/configs/hammerhead.h @@ -137,7 +137,6 @@ #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00400000) diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index ac5ca9a..2a937c6 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -82,7 +82,7 @@ #define CONFIG_ENV_OFFSET 0x4000 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_SECT_SIZE 0x12000 /* Total Size of Environment Sector */ #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) #define ENV_IS_EMBEDDED #else diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index f084834..2384864 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -575,12 +575,9 @@ #define CONFIG_VERSION_VARIABLE -#define CONFIG_FIT -#define CONFIG_FIT_SIGNATURE #define CONFIG_IMAGE_FORMAT_LEGACY #define CONFIG_CMD_FDT #define CONFIG_CMD_HASH -#define CONFIG_RSA #define CONFIG_SHA1 #define CONFIG_SHA256 diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 1b9c277..21c5dce 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -61,11 +61,19 @@ #define CONFIG_SPL_LIBDISK_SUPPORT #endif +#if defined(CONFIG_MX6SX) +#define CONFIG_SPL_BSS_START_ADDR 0x88200000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x88300000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3200000 /* 50 MB */ +#define CONFIG_SYS_TEXT_BASE 0x87800000 +#else #define CONFIG_SPL_BSS_START_ADDR 0x18200000 #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ #define CONFIG_SYS_SPL_MALLOC_START 0x18300000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x3200000 /* 50 MB */ #define CONFIG_SYS_TEXT_BASE 0x17800000 #endif +#endif #endif diff --git a/include/configs/ip04.h b/include/configs/ip04.h index ec510bd..2ee215f 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -61,7 +61,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL 0xffc2ffc2 #define CONFIG_EBIU_AMBCTL1_VAL 0xffc2ffc2 -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index f780f8b..2ed0855 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -195,7 +195,7 @@ } #ifndef __ASSEMBLY__ -#include <asm/arch-kirkwood/gpio.h> +#include <asm/arch/gpio.h> extern void __set_direction(unsigned pin, int high); void set_sda(int state); void set_scl(int state); diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h index 14fd290..12f9d42 100644 --- a/include/configs/km82xx.h +++ b/include/configs/km82xx.h @@ -34,6 +34,8 @@ #define CONFIG_SYS_TEXT_BASE 0xFE000000 +#define CONFIG_MISC_INIT_R + /* include common defines/options for all Keymile boards */ #include "km/keymile-common.h" #include "km/km-powerpc.h" diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index a14bfe3..c354c29 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -56,6 +56,7 @@ * Commands configuration */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_ENV @@ -78,6 +79,9 @@ */ #include "mv-common.h" +/* loading initramfs images without uimage header */ +#define CONFIG_SUPPORT_RAW_INITRD + /* ST M25P40 */ #undef CONFIG_SPI_FLASH_MACRONIX #define CONFIG_SPI_FLASH_STMICRO @@ -125,27 +129,31 @@ "hdpart=0:1\0" \ "kernel_addr=0x00800000\0" \ "ramdisk_addr=0x01000000\0" \ - "fdt_addr=0x01ff0000\0" \ + "fdt_addr=0x00ff0000\0" \ "bootcmd_legacy=ide reset " \ - "&& load ide ${hdpart} 0x00100000 /uImage.buffalo " \ - "&& load ide ${hdpart} 0x00800000 /initrd.buffalo " \ - "&& bootm 0x00100000 0x00800000\0" \ - "bootcmd_net=bootp ${kernel_addr} uImage " \ - "&& tftpboot ${ramdisk_addr} uInitrd " \ + "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ + "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ + "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ + "&& tftpboot ${ramdisk_addr} initrd.img " \ + "&& setenv ramdisk_len ${filesize} " \ "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ - "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "&& bootz ${kernel_addr} " \ + "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ "bootcmd_hdd=ide reset " \ - "&& load ide ${hdpart} ${kernel_addr} /uImage " \ - "&& load ide ${hdpart} ${ramdisk_addr} /uInitrd " \ - "&& load ide ${hdpart} ${fdt_addr} " \ - "/" CONFIG_FDTFILE " " \ - "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ + "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ + "&& setenv ramdisk_len ${filesize} " \ + "&& load ide ${hdpart} ${fdt_addr} /dtb " \ + "&& bootz ${kernel_addr} " \ + "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ "bootcmd_usb=usb start " \ - "&& load usb 0:1 ${kernel_addr} /uImage " \ - "&& load usb 0:1 ${ramdisk_addr} /uInitrd " \ - "&& load usb 0:1 ${fdt_addr} " \ - "/" CONFIG_FDTFILE " " \ - "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ + "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ + "&& setenv ramdisk_len ${filesize} " \ + "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ + "&& bootz ${kernel_addr} " \ + "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ "eraseenv=sf probe 0 " \ "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ diff --git a/include/configs/malta.h b/include/configs/malta.h index 684d249..354672e 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -71,6 +71,7 @@ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_HUSH_PARSER #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING @@ -107,6 +108,16 @@ (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE) /* + * IDE/ATA + */ +#define CONFIG_SYS_IDE_MAXBUS 1 +#define CONFIG_SYS_IDE_MAXDEVICE 2 +#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO_BASE_ADDRESS +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01f0 +#define CONFIG_SYS_ATA_DATA_OFFSET 0 +#define CONFIG_SYS_ATA_REG_OFFSET 0 + +/* * Commands */ #include <config_cmd_default.h> @@ -118,6 +129,8 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IDE #define CONFIG_CMD_PCI #define CONFIG_CMD_PING diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 72217bd..5999d60 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -43,6 +43,8 @@ #define CONFIG_SF_DEFAULT_SPEED 1000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 #define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_BAR /* Environment in SPI NOR flash */ #define CONFIG_ENV_IS_IN_SPI_FLASH @@ -65,4 +67,51 @@ */ #include "mv-common.h" +/* + * Memory layout while starting into the bin_hdr via the + * BootROM: + * + * 0x4000.4000 - 0x4003.4000 headers space (192KiB) + * 0x4000.4030 bin_hdr start address + * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) + * 0x4007.fffc BootROM stack top + * + * The address space between 0x4007.fffc and 0x400f.fff is not locked in + * L2 cache thus cannot be used. + */ + +/* SPL */ +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40004030 +#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE (16 << 10) + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LDSCRIPT "arch/arm/mvebu-common/u-boot-spl.lds" + +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + +/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ +#define CONFIG_SYS_MVEBU_DDR +#define CONFIG_DDR_FIXED_SIZE (1 << 20) /* 1GiB */ + #endif /* _CONFIG_DB_MV7846MP_GP_H */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index bb07060..166ab4f 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -106,62 +106,22 @@ # define CONFIG_XILINX_TB_WATCHDOG #endif -/* - * memory layout - Example - * CONFIG_SYS_TEXT_BASE = 0x1200_0000; defined in config.mk - * CONFIG_SYS_SRAM_BASE = 0x1000_0000; - * CONFIG_SYS_SRAM_SIZE = 0x0400_0000; 64MB - * - * CONFIG_SYS_MONITOR_LEN = 0x40000 - * CONFIG_SYS_MALLOC_LEN = 3 * CONFIG_SYS_MONITOR_LEN = 0xC0000 - * - * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 - * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - CONFIG_SYS_MONITOR_LEN = 0x13FB_F000 - * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - CONFIG_SYS_MALLOC_LEN = 0x13EF_F000 - * - * 0x1000_0000 CONFIG_SYS_SDRAM_BASE - * MEMTEST_AREA 64kB - * FREE - * 0x1200_0000 CONFIG_SYS_TEXT_BASE - * U-BOOT code - * 0x1202_0000 - * FREE - * - * STACK - * 0x13EF_F000 CONFIG_SYS_MALLOC_BASE - * MALLOC_AREA 768kB Alloc - * 0x13FB_F000 CONFIG_SYS_MONITOR_BASE - * MONITOR_CODE 256kB Env - * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET - * GLOBAL_DATA 4kB bd, gd - * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - */ - +#ifndef CONFIG_OF_CONTROL /* ddr sdram - main memory */ -#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START -#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) - -/* global pointer */ -/* start of global data */ -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_SDRAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* monitor code */ -#define SIZE 0x40000 -#define CONFIG_SYS_MONITOR_LEN SIZE -#define CONFIG_SYS_MONITOR_BASE \ - (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \ - - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE) -#define CONFIG_SYS_MONITOR_END \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_MALLOC_LEN (SIZE * 3) -#define CONFIG_SYS_MALLOC_BASE \ - (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) - -/* stack */ -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE +# define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START +# define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE +#endif + +#define CONFIG_SYS_MALLOC_LEN 0xC0000 +#ifndef CONFIG_SPL_BUILD +# define CONFIG_SYS_MALLOC_F_LEN 1024 +#else +# define CONFIG_SYS_MALLOC_SIMPLE +# define CONFIG_SYS_MALLOC_F_LEN 0x150 +#endif + +/* Stack location before relocation */ +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_TEXT_BASE /* * CFI flash memory layout - Example @@ -452,7 +412,10 @@ #define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" #define CONFIG_SPL_RAM_DEVICE -#define CONFIG_SPL_NOR_SUPPORT +#ifdef CONFIG_SYS_FLASH_BASE +# define CONFIG_SPL_NOR_SUPPORT +# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE +#endif /* for booting directly linux */ #define CONFIG_SPL_OS_BOOT @@ -468,36 +431,20 @@ /* BRAM start */ #define CONFIG_SYS_INIT_RAM_ADDR 0x0 /* BRAM size - will be generated */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -/* Stack pointer prior relocation, must situated at on-chip RAM */ -#define CONFIG_SYS_SPL_MALLOC_END (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100 +#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -/* - * The main reason to do it in this way is that MALLOC_START - * can't be defined - common/spl/spl.c - */ -#if (CONFIG_SYS_SPL_MALLOC_SIZE != 0) -# define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_SPL_MALLOC_END - \ - CONFIG_SYS_SPL_MALLOC_SIZE) -# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_START -#else -# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_END -#endif +# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + CONFIG_SYS_MALLOC_F_LEN) /* Just for sure that there is a space for stack */ #define CONFIG_SPL_STACK_SIZE 0x100 -#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_INIT_RAM_ADDR - \ - GENERATED_GBL_DATA_SIZE - \ - CONFIG_SYS_SPL_MALLOC_SIZE - \ + CONFIG_SYS_MALLOC_F_LEN - \ CONFIG_SPL_STACK_SIZE) #endif /* __CONFIG_H */ diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h index fc7ecfa..2fd3add 100644 --- a/include/configs/mimc200.h +++ b/include/configs/mimc200.h @@ -157,7 +157,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (1024*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h new file mode 100644 index 0000000..823e051 --- /dev/null +++ b/include/configs/minnowmax.h @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/x86-common.h> + +#define CONFIG_SYS_MONITOR_LEN (1 << 20) +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_X86_SERIAL +#define CONFIG_SMSC_LPC47M + +#define CONFIG_PCI_MEM_BUS 0xd0000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_PREF_BUS 0xc0000000 +#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS +#define CONFIG_PCI_PREF_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x2000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0xe000 + +#define CONFIG_SYS_EARLY_PCI_INIT +#define CONFIG_PCI_PNP +#define CONFIG_RTL8169 +#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \ + "stdout=vga,serial\0" \ + "stderr=vga,serial\0" + +#define CONFIG_SCSI_DEV_LIST \ + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA} +#define CONFIG_SPI_FLASH_SST + +#define CONFIG_MMC +#define CONFIG_SDHCI +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC_SDMA +#define CONFIG_CMD_MMC + +#undef CONFIG_USB_MAX_CONTROLLER_COUNT +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 + +#define CONFIG_X86_OPTION_ROM_FILE vga.bin +#define CONFIG_X86_OPTION_ROM_ADDR 0xfff90000 + +#ifndef CONFIG_SYS_COREBOOT +#define CONFIG_VIDEO_VESA +#endif +#define VIDEO_IO_OFFSET 0 +#define CONFIG_X86EMU_RAW_IO +#define CONFIG_VGA_AS_SINGLE_DEVICE + +#define CONFIG_FIT_SIGNATURE +#define CONFIG_RSA + +/* Avoid a warning in the Realtek Ethernet driver */ +#define CONFIG_SYS_CACHELINE_SIZE 16 + +#endif /* __CONFIG_H */ diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index f0f721e..4aa8101 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -25,9 +25,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -#define CONFIG_DM -#define CONFIG_DM_THERMAL -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_IMX6_THERMAL #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index e6c4130..c567d9d 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -198,7 +198,7 @@ #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED #else -#define CONFIG_ENV_OFFSET (6 * SZ_64K) +#define CONFIG_ENV_OFFSET (8 * SZ_64K) #define CONFIG_ENV_IS_IN_MMC #endif diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index fbaae3f..a290129 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -18,6 +18,12 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#ifdef CONFIG_SPL +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#include "imx6_spl.h" +#endif + #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -28,7 +34,6 @@ #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART @@ -222,9 +227,6 @@ #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) #endif -#define CONFIG_DM -#define CONFIG_DM_THERMAL -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_IMX6_THERMAL #define CONFIG_CMD_FUSE @@ -255,7 +257,7 @@ #define FSL_QSPI_FLASH_NUM 2 #endif -#define CONFIG_ENV_OFFSET (6 * SZ_64K) +#define CONFIG_ENV_OFFSET (8 * SZ_64K) #define CONFIG_ENV_SIZE SZ_8K #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 982b689..46fc91e 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -28,6 +28,7 @@ #define CONFIG_OMAP3_RX51 /* working with RX51 */ #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ #define CONFIG_OMAP_COMMON +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 diff --git a/include/configs/novena.h b/include/configs/novena.h index ea75d2c..074110c 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -116,7 +116,6 @@ #define CONFIG_SYS_MEMTEST_END 0x20000000 #define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* SPL */ #define CONFIG_SPL_FAT_SUPPORT diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 807e96b..8b47537 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -177,12 +177,9 @@ /* I2C */ #define CONFIG_CMD_I2C -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_S3C24X0 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0 -#define CONFIG_MAX_I2C_NUM 8 -#define CONFIG_SYS_I2C_INIT_BOARD /* POWER */ #define CONFIG_POWER diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index b2b3750..6295ec5 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -29,11 +29,21 @@ #define CONFIG_REVISION_TAG 1 -/* define to enable boot progress via leds */ -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ - (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) -#define CONFIG_SHOW_BOOT_PROGRESS +/* Status LED */ +#define CONFIG_STATUS_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define CONFIG_GPIO_LED +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#define RED_LED_GPIO 27 +#endif +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) +#define RED_LED_GPIO 16 #endif +#define RED_LED_DEV 0 +#define STATUS_LED_BIT RED_LED_GPIO +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BOOT RED_LED_DEV /* GPIO banks */ #define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */ diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index 255c933..c061e93 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -108,6 +108,16 @@ #endif +/* SPL */ +#ifdef CONFIG_SPL +#include "imx6_spl.h" +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) +#define CONFIG_SPL_SPI_LOAD +#endif + #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII @@ -159,7 +169,6 @@ /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h index a1c980d..f04f061 100644 --- a/include/configs/peach-pi.h +++ b/include/configs/peach-pi.h @@ -43,8 +43,6 @@ #endif #define CONFIG_POWER_TPS65090_EC -#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */ -#define CONFIG_DM_CROS_EC #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_EXYNOS diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 6516a72..b5efbdc 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -43,8 +43,6 @@ #endif #define CONFIG_POWER_TPS65090_EC -#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */ -#define CONFIG_DM_CROS_EC #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_EXYNOS diff --git a/include/configs/platinum.h b/include/configs/platinum.h new file mode 100644 index 0000000..134bb45 --- /dev/null +++ b/include/configs/platinum.h @@ -0,0 +1,319 @@ +/* + * Copyright (C) 2014, Barco (www.barco.com) + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PLATINUM_CONFIG_H__ +#define __PLATINUM_CONFIG_H__ + +#define CONFIG_SYS_GENERIC_BOARD + +/* SPL */ +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT + +/* Location in NAND to read U-Boot from */ +#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024) + +#include "imx6_spl.h" /* common IMX6 SPL configuration */ +#include "mx6_common.h" +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> + +/* + * Console configuration + */ + +#include <config_cmd_default.h> +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FUSE +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_I2C +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_TIME +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_USB + +/* + * Hardware configuration + */ + +/* GPIO config */ +#define CONFIG_MXC_GPIO + +/* UART config */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_INDEX 1 + +/* I2C config */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* MMC config */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 1 +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_DOS_PARTITION + +/* Ethernet config */ +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR + +#define CONFIG_PHYLIB + +/* USB config */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + +/* Memory config */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#ifndef PHYS_SDRAM_SIZE +#define PHYS_SDRAM_SIZE (1024 << 20) +#endif + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#ifdef CONFIG_CMD_NAND + +/* NAND config */ +#define CONFIG_NAND_MXS +#ifndef CONFIG_SYS_NAND_MAX_CHIPS +#define CONFIG_SYS_NAND_MAX_CHIPS 2 +#endif +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* DMA config, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 + +/* Fuse support */ +#define CONFIG_MXC_OCOTP + +/* Environment in NAND */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (16 << 20) +#define CONFIG_ENV_SECT_SIZE (128 << 10) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10)) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#else /* CONFIG_CMD_NAND */ + +/* Environment in MMC */ +#define CONFIG_ENV_SIZE (8 << 10) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (6 * 64 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#endif /* CONFIG_CMD_NAND */ + +/* + * U-Boot configuration + */ + +/* Console boot messages */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Tag config */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Board startup config */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Device tree support */ +#define CONFIG_OF_LIBFDT + +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ + PHYS_SDRAM_SIZE - (12 << 20)) + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTCOMMAND "run bootubi_scr" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_PREBOOT + +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* MTD/UBI/UBIFS config */ +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_RBTREE + +#if (CONFIG_SYS_NAND_MAX_CHIPS == 1) +#define MTDIDS_DEFAULT "nand0=gpmi-nand" +#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \ + "512k(env1),512k(env2),-(ubi)" +#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2) +#define MTDIDS_DEFAULT "nand0=gpmi-nand" +#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \ + "512k(env1),512k(env2),495M(ubi0)," \ + "14M(res0),2M(res1)," \ + "512k(res2),512k(res3),-(ubi1)" +#endif + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +/* + * Environment configuration + */ + +#if (CONFIG_SYS_NAND_MAX_CHIPS == 1) +#define CONFIG_COMMON_ENV_UBI \ + "setubipartition=env set ubipartition ubi\0" \ + "setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0" +#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2) +#define CONFIG_COMMON_ENV_UBI \ + "setubipartition=env set ubipartition ubi$boot_vol\0" \ + "setubirfs=env set ubirfs ubi0:rootfs\0" +#endif + +#define CONFIG_COMMON_ENV_MISC \ + "user=user\0" \ + "project="CONFIG_PLATINUM_PROJECT"\0" \ + "uimage=uImage\0" \ + "dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \ + "serverip=serverip\0" \ + "memaddrlinux=0x10800000\0" \ + "memaddrsrc=0x11000000\0" \ + "memaddrdtb=0x12000000\0" \ + "console=ttymxc0\0" \ + "baudrate=115200\0" \ + "boot_scr=boot.uboot\0" \ + "boot_vol=0\0" \ + "mtdids="MTDIDS_DEFAULT"\0" \ + "mtdparts="MTDPARTS_DEFAULT"\0" \ + "mmcfs=ext2\0" \ + "mmcrootpart=1\0" \ + \ + "setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \ + "settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \ + "settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \ + "setubifilelinux=env set ubifilelinux boot/$uimage\0" \ + "setubipfiledtb=env set ubifiledtb boot/$dtb\0" \ + "setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \ + "setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \ + "setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \ + \ + "loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \ + "loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \ + "loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \ + "loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \ + "loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \ + "$mmcfilelinux\0" \ + "loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \ + "$mmcfiledtb\0" \ + \ + "ubipart=ubi part $ubipartition\0" \ + "ubimount=ubifsmount $ubirfs\0" \ + \ + "setbootargscommon=env set bootargs $bootargs " \ + "console=$console,$baudrate enable_wait_mode=off\0" \ + "setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \ + "setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \ + "setbootargsubirfs=env set bootargs $bootargs " \ + "ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \ + "setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \ + "nfsroot=$serverip:$nfspath,v3,tcp\0" \ + "setbootargsmmcrfs=env set bootargs $bootargs " \ + "root=$mmcrootdev rootwait rw\0" \ + \ + "bootnet=run settftpfilelinux settftpfiledtb setnfspath " \ + "setbootargscommon setbootargsmtd setbootargsdhcp " \ + "setbootargsnfsrfs;" \ + "run loadtftpkernel loadtftpdtb;" \ + "bootm $memaddrlinux - $memaddrdtb\0" \ + "bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \ + "run setubipartition setubirfs;" \ + "run setbootargscommon setbootargsmtd " \ + "setbootargsubirfs;" \ + "run loadtftpkernel loadtftpdtb;" \ + "bootm $memaddrlinux - $memaddrdtb\0" \ + "bootubi=run setubipartition setubirfs setubifilelinux " \ + "setubipfiledtb;" \ + "run setbootargscommon setbootargsmtd " \ + "setbootargsubirfs;" \ + "run ubipart ubimount loadubikernel loadubidtb;" \ + "bootm $memaddrlinux - $memaddrdtb\0" \ + "bootubi_scr=run setubipartition setubirfs;" \ + "run ubipart ubimount;" \ + "if ubifsload ${memaddrsrc} boot/${boot_scr}; " \ + "then source ${memaddrsrc}; else run bootubi; fi\0" \ + "bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \ + "setbootargscommon setbootargsmmcrfs;" \ + "run loadmmckernel loadmmcdtb;" \ + "bootm $memaddrlinux - $memaddrdtb\0" \ + \ + "bootcmd="CONFIG_BOOTCOMMAND"\0" + +#define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \ + CONFIG_COMMON_ENV_UBI +#endif /* __PLATINUM_CONFIG_H__ */ diff --git a/include/configs/platinum_picon.h b/include/configs/platinum_picon.h new file mode 100644 index 0000000..4590df5 --- /dev/null +++ b/include/configs/platinum_picon.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2014, Barco (www.barco.com) + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PLATINUM_PICON_CONFIG_H__ +#define __PLATINUM_PICON_CONFIG_H__ + +#define CONFIG_PLATINUM_PICON +#define CONFIG_PLATINUM_BOARD "Barco Picon" +#define CONFIG_PLATINUM_PROJECT "picon" +#define CONFIG_PLATINUM_CPU "imx6dl" + +#define CONFIG_MX6 + +#include <configs/platinum.h> + +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_FEC_MXC_PHYADDR 0 + +#define CONFIG_HOSTNAME picon + +#define CONFIG_SYS_PROMPT "picon > " + +#define CONFIG_PLATFORM_ENV_SETTINGS "\0" + +#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_COMMON_ENV_SETTINGS \ + CONFIG_PLATFORM_ENV_SETTINGS + +#endif /* __PLATINUM_PICON_CONFIG_H__ */ diff --git a/include/configs/platinum_titanium.h b/include/configs/platinum_titanium.h new file mode 100644 index 0000000..6789655 --- /dev/null +++ b/include/configs/platinum_titanium.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2014, Barco (www.barco.com) + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PLATINUM_TITANIUM_CONFIG_H__ +#define __PLATINUM_TITANIUM_CONFIG_H__ + +#define CONFIG_PLATINUM_TITANIUM +#define CONFIG_PLATINUM_BOARD "Barco Titanium" +#define CONFIG_PLATINUM_PROJECT "titanium" +#define CONFIG_PLATINUM_CPU "imx6q" + +#define CONFIG_MX6 + +#define PHYS_SDRAM_SIZE (512 << 20) +#define CONFIG_SYS_NAND_MAX_CHIPS 1 + +#include <configs/platinum.h> + +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_FEC_MXC_PHYADDR 4 + +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 +#define CONFIG_PHY_RESET_DELAY 1000 + +#define CONFIG_HOSTNAME titanium + +#define CONFIG_SYS_PROMPT "titanium > " + +#define CONFIG_PLATFORM_ENV_SETTINGS "\0" + +#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_COMMON_ENV_SETTINGS \ + CONFIG_PLATFORM_ENV_SETTINGS + +#endif /* __PLATINUM_TITANIUM_CONFIG_H__ */ diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h new file mode 100644 index 0000000..3121ac9 --- /dev/null +++ b/include/configs/rpi-common.h @@ -0,0 +1,186 @@ +/* + * (C) Copyright 2012,2015 Stephen Warren + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _RPI_COMMON_H_ +#define _RPI_COMMON_H_ + +#include <linux/sizes.h> + +/* Architecture, CPU, etc.*/ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_BCM2835 +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_SYS_DCACHE_OFF +/* + * 2835 is a SKU in a series for which the 2708 is the first or primary SoC, + * so 2708 has historically been used rather than a dedicated 2835 ID. + * + * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation + * chose to use someone else's previously registered machine ID (3139, MX51_GGC) + * rather than obtaining a valid ID:-/ + */ +#ifndef CONFIG_BCM2836 +#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 +#endif + +/* Memory layout */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_TEXT_BASE 0x00008000 +#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE +/* + * The board really has 256M. However, the VC (VideoCore co-processor) shares + * the RAM, and uses a configurable portion at the top. We tell U-Boot that a + * smaller amount of RAM is present in order to avoid stomping on the area + * the VC uses. + */ +#define CONFIG_SYS_SDRAM_SIZE SZ_128M +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_SDRAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_MALLOC_LEN SZ_4M +#define CONFIG_SYS_MEMTEST_START 0x00100000 +#define CONFIG_SYS_MEMTEST_END 0x00200000 +#define CONFIG_LOADADDR 0x00200000 + +/* Flash */ +#define CONFIG_SYS_NO_FLASH + +/* Devices */ +/* GPIO */ +#define CONFIG_BCM2835_GPIO +/* LCD */ +#define CONFIG_LCD +#define CONFIG_LCD_DT_SIMPLEFB +#define LCD_BPP LCD_COLOR16 +/* + * Prevent allocation of RAM for FB; the real FB address is queried + * dynamically from the VideoCore co-processor, and comes from RAM + * not owned by the ARM CPU. + */ +#define CONFIG_FB_ADDR 0 +#define CONFIG_VIDEO_BCM2835 +#define CONFIG_SYS_WHITE_ON_BLACK + +/* SD/MMC configuration */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_SDHCI +#define CONFIG_MMC_SDHCI_IO_ACCESSORS +#define CONFIG_BCM2835_SDHCI + +#define CONFIG_CMD_USB +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_DWC2 +#ifdef CONFIG_BCM2836 +#define CONFIG_USB_DWC2_REG_ADDR 0x3f980000 +#else +#define CONFIG_USB_DWC2_REG_ADDR 0x20980000 +#endif +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_MISC_INIT_R +#endif + +/* Console UART */ +#define CONFIG_PL01X_SERIAL +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 + +/* Console configuration */ +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Environment */ +#define CONFIG_ENV_SIZE SZ_16K +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0:1" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_FAT_WRITE +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_SYS_LOAD_ADDR 0x1000000 +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* Shell */ +#define CONFIG_SYS_MAXARGS 8 +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_COMMAND_HISTORY + +/* Commands */ +#include <config_cmd_default.h> +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_MMC +#define CONFIG_PARTITION_UUIDS +#define CONFIG_CMD_PART + +/* Device tree support */ +#define CONFIG_OF_BOARD_SETUP +/* ATAGs support for bootm/bootz */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG + +#include <config_distro_defaults.h> + +/* Some things don't make sense on this HW or yet */ +#undef CONFIG_CMD_FPGA + +/* Environment */ +#define ENV_DEVICE_SETTINGS \ + "stdin=serial,lcd\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" + +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it low in memory to avoid conflicts. + * + * pxefile_addr_r can be pretty much anywhere that doesn't conflict with + * something else. Put it low in memory to avoid conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define ENV_MEM_LAYOUT_SETTINGS \ + "scriptaddr=0x00000000\0" \ + "pxefile_addr_r=0x00100000\0" \ + "kernel_addr_r=0x01000000\0" \ + "fdt_addr_r=0x02000000\0" \ + "ramdisk_addr_r=0x02100000\0" \ + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> + +#define CONFIG_EXTRA_ENV_SETTINGS \ + ENV_DEVICE_SETTINGS \ + ENV_MEM_LAYOUT_SETTINGS \ + BOOTENV + +#define CONFIG_BOOTDELAY 2 + +#endif diff --git a/include/configs/rpi.h b/include/configs/rpi.h index c94f411..ab2f4db 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -1,193 +1,12 @@ /* - * (C) Copyright 2012 Stephen Warren + * (C) Copyright 2012,2015 Stephen Warren * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __CONFIG_H #define __CONFIG_H -#include <linux/sizes.h> - -/* Architecture, CPU, etc.*/ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_BCM2835 -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_DCACHE_OFF -/* - * 2835 is a SKU in a series for which the 2708 is the first or primary SoC, - * so 2708 has historically been used rather than a dedicated 2835 ID. - */ -#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 - -/* Enable driver model */ -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL - -/* Memory layout */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_TEXT_BASE 0x00008000 -#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -/* - * The board really has 256M. However, the VC (VideoCore co-processor) shares - * the RAM, and uses a configurable portion at the top. We tell U-Boot that a - * smaller amount of RAM is present in order to avoid stomping on the area - * the VC uses. - */ -#define CONFIG_SYS_SDRAM_SIZE SZ_128M -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_SDRAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_MALLOC_LEN SZ_4M -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x00200000 -#define CONFIG_LOADADDR 0x00200000 - -/* Flash */ -#define CONFIG_SYS_NO_FLASH - -/* Devices */ -/* GPIO */ -#define CONFIG_BCM2835_GPIO -/* LCD */ -#define CONFIG_LCD -#define CONFIG_LCD_DT_SIMPLEFB -#define LCD_BPP LCD_COLOR16 -/* - * Prevent allocation of RAM for FB; the real FB address is queried - * dynamically from the VideoCore co-processor, and comes from RAM - * not owned by the ARM CPU. - */ -#define CONFIG_FB_ADDR 0 -#define CONFIG_VIDEO_BCM2835 -#define CONFIG_SYS_WHITE_ON_BLACK - -/* SD/MMC configuration */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_SDHCI -#define CONFIG_MMC_SDHCI_IO_ACCESSORS -#define CONFIG_BCM2835_SDHCI - -#define CONFIG_CMD_USB -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_DWC2 -#define CONFIG_USB_DWC2_REG_ADDR 0x20980000 -#define CONFIG_USB_STORAGE -#define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_ETHER_SMSC95XX -#define CONFIG_MISC_INIT_R -#endif - -/* Console UART */ -#define CONFIG_PL01X_SERIAL -#define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 115200 - -/* Console configuration */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -/* Environment */ -#define CONFIG_ENV_SIZE SZ_16K -#define CONFIG_ENV_IS_IN_FAT -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "0:1" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_FAT_WRITE -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_SYS_LOAD_ADDR 0x1000000 -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* Shell */ -#define CONFIG_SYS_MAXARGS 8 -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_COMMAND_HISTORY - -/* Commands */ -#include <config_cmd_default.h> -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_MMC -#define CONFIG_PARTITION_UUIDS -#define CONFIG_CMD_PART - -/* Device tree support */ -#define CONFIG_OF_BOARD_SETUP -/* ATAGs support for bootm/bootz */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG - -#include <config_distro_defaults.h> - -/* Some things don't make sense on this HW or yet */ -#undef CONFIG_CMD_FPGA - -/* Environment */ -#define ENV_DEVICE_SETTINGS \ - "stdin=serial,lcd\0" \ - "stdout=serial,lcd\0" \ - "stderr=serial,lcd\0" - -/* - * Memory layout for where various images get loaded by boot scripts: - * - * scriptaddr can be pretty much anywhere that doesn't conflict with something - * else. Put it low in memory to avoid conflicts. - * - * pxefile_addr_r can be pretty much anywhere that doesn't conflict with - * something else. Put it low in memory to avoid conflicts. - * - * kernel_addr_r must be within the first 128M of RAM in order for the - * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will - * decompress itself to 0x8000 after the start of RAM, kernel_addr_r - * should not overlap that area, or the kernel will have to copy itself - * somewhere else before decompression. Similarly, the address of any other - * data passed to the kernel shouldn't overlap the start of RAM. Pushing - * this up to 16M allows for a sizable kernel to be decompressed below the - * compressed load address. - * - * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for - * the compressed kernel to be up to 16M too. - * - * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows - * for the FDT/DTB to be up to 1M, which is hopefully plenty. - */ -#define ENV_MEM_LAYOUT_SETTINGS \ - "scriptaddr=0x00000000\0" \ - "pxefile_addr_r=0x00100000\0" \ - "kernel_addr_r=0x01000000\0" \ - "fdt_addr_r=0x02000000\0" \ - "ramdisk_addr_r=0x02100000\0" \ - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(USB, usb, 0) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) -#include <config_distro_bootcmd.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - ENV_DEVICE_SETTINGS \ - ENV_MEM_LAYOUT_SETTINGS \ - BOOTENV - -#define CONFIG_BOOTDELAY 2 +#include "rpi-common.h" #endif diff --git a/include/configs/rpi_2.h b/include/configs/rpi_2.h new file mode 100644 index 0000000..2e7e74f --- /dev/null +++ b/include/configs/rpi_2.h @@ -0,0 +1,15 @@ +/* + * (C) Copyright 2012,2015 Stephen Warren + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BCM2836 + +#include "rpi-common.h" + +#endif diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index dfa2e07..8fadc68 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -40,7 +40,6 @@ #define CONFIG_CMDLINE_EDITING /* Size of malloc() pool before and after relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20)) /* @@ -290,9 +289,5 @@ #define CONFIG_OF_LIBFDT #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL #endif /* __CONFIG_H */ diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 9458047..5dab61d 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -169,13 +169,14 @@ "bootz 0x22000000 - 0x21000000" #elif CONFIG_SYS_USE_MMC /* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_FILE "uboot.env" +#define FAT_ENV_DEVICE_AND_PART "0" +#define CONFIG_ENV_SIZE 0x4000 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d3_xplained.dtb; " \ "fatload mmc 0:1 0x22000000 zImage; " \ "bootz 0x22000000 - 0x21000000" -#define CONFIG_SYS_MMC_ENV_DEV 0 #else #define CONFIG_ENV_IS_NOWHERE #endif @@ -226,7 +227,7 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/u-boot-spl.lds #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index f2849d7..bd288be 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -191,6 +191,7 @@ #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) #define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE #endif #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ @@ -215,13 +216,14 @@ "bootm 0x22000000 - 0x21000000" #elif CONFIG_SYS_USE_MMC /* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_FILE "uboot.env" +#define FAT_ENV_DEVICE_AND_PART "0" +#define CONFIG_ENV_SIZE 0x4000 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ "fatload mmc 0:1 0x22000000 uImage; " \ "bootm 0x22000000 - 0x21000000" -#define CONFIG_SYS_MMC_ENV_DEV 0 #else #define CONFIG_ENV_IS_NOWHERE #endif @@ -272,7 +274,7 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/u-boot-spl.lds #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 996973d..6493d56 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -20,7 +20,9 @@ #define CONFIG_ARCH_CPU_INIT +#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT +#endif #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO @@ -66,8 +68,12 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x20000000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x210000 +#else #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ @@ -221,4 +227,54 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x200000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_PMECC_CAP 8 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 224 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER + +#elif CONFIG_SYS_USE_SERIALFLASH +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + +#endif #endif diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 09ab4d7..9e1b86a 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -20,7 +20,9 @@ #define CONFIG_ARCH_CPU_INIT +#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT +#endif #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO @@ -66,8 +68,12 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x20000000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x210000 +#else #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ @@ -219,4 +225,54 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x200000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_PMECC_CAP 8 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 224 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER + +#elif CONFIG_SYS_USE_SERIALFLASH +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + +#endif #endif diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 657f751..febbfb6 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -23,16 +23,6 @@ #define CONFIG_BOOTSTAGE #define CONFIG_BOOTSTAGE_REPORT -#define CONFIG_DM -#define CONFIG_CMD_DEMO -#define CONFIG_CMD_DM -#define CONFIG_DM_DEMO -#define CONFIG_DM_DEMO_SIMPLE -#define CONFIG_DM_DEMO_SHAPE -#define CONFIG_DM_GPIO -#define CONFIG_DM_TEST -#define CONFIG_DM_SERIAL -#define CONFIG_DM_CROS_EC #define CONFIG_SYS_STDIO_DEREGISTER @@ -41,9 +31,6 @@ #define CONFIG_OF_LIBFDT #define CONFIG_LMB -#define CONFIG_FIT -#define CONFIG_FIT_SIGNATURE -#define CONFIG_RSA #define CONFIG_CMD_FDT #define CONFIG_ANDROID_BOOT_IMAGE @@ -73,7 +60,6 @@ /* * Size of malloc() pool, before and after relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_MALLOC_F_ADDR 0x0010000 #define CONFIG_SYS_MALLOC_LEN (32 << 20) /* 32MB */ @@ -100,8 +86,6 @@ #define CONFIG_CMD_SF_TEST #define CONFIG_CMD_SPI #define CONFIG_SPI_FLASH -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SPI_FLASH_EON #define CONFIG_SPI_FLASH_GIGADEVICE @@ -112,7 +96,6 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_WINBOND -#define CONFIG_DM_I2C #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C_SANDBOX #define CONFIG_I2C_EDID @@ -158,9 +141,6 @@ #define CONFIG_BOOTARGS "" -#define CONFIG_CROS_EC -#define CONFIG_CMD_CROS_EC -#define CONFIG_CROS_EC_SANDBOX #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_BOARD_LATE_INIT @@ -183,7 +163,6 @@ #define LCD_BPP LCD_COLOR16 #define CONFIG_LCD_BMP_RLE8 -#define CONFIG_CROS_EC_KEYB #define CONFIG_KEYBOARD #define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial,cros-ec-keyb\0" \ diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 21c8bda..84029cb 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -33,6 +33,11 @@ #define CONFIG_LZO /* + * Enable device tree support + */ +#define CONFIG_OF_LIBFDT + +/* * Miscellaneous configurable options */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -51,6 +56,7 @@ #define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros @@ -141,6 +147,5 @@ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS -#define CONFIG_LZO #endif /* _CONFIG_SHEEVAPLUG_H */ diff --git a/include/configs/silk.h b/include/configs/silk.h new file mode 100644 index 0000000..a4235e9 --- /dev/null +++ b/include/configs/silk.h @@ -0,0 +1,117 @@ +/* + * include/configs/silk.h + * This file is silk board configuration. + * + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __SILK_H +#define __SILK_H + +#undef DEBUG +#define CONFIG_R8A7794 +#define CONFIG_RMOBILE_BOARD_STRING "Silk" + +#include "rcar-gen2-common.h" + +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x70000000 +#else +#define CONFIG_SYS_TEXT_BASE 0xE6304000 +#endif + +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC +#else +#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC +#endif +#define STACK_AREA_SIZE 0xC000 +#define LOW_LEVEL_MERAM_STACK \ + (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + +/* MEMORY */ +#define RCAR_GEN2_SDRAM_BASE 0x40000000 +#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024) +#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE +#define CONFIG_CONS_SCIF2 +#define CONFIG_SCIF_USE_EXT_CLK + +/* FLASH */ +#define CONFIG_SPI +#define CONFIG_SPI_FLASH_BAR +#define CONFIG_SH_QSPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_QUAD +#define CONFIG_SYS_NO_FLASH + +/* SH Ether */ +#define CONFIG_NET_MULTI +#define CONFIG_SH_ETHER +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x1 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* Board Clock */ +#define RMOBILE_XTAL_CLK 20000000u +#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK +#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */ +#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) +#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24) +#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */ + +#define CONFIG_SYS_TMU_CLK_DIV 4 + +/* i2c */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SH +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3 +#define CONFIG_SYS_I2C_SH_SPEED0 400000 +#define CONFIG_SYS_I2C_SH_SPEED1 400000 +#define CONFIG_SYS_I2C_SH_SPEED2 400000 +#define CONFIG_SH_I2C_DATA_HIGH 4 +#define CONFIG_SH_I2C_DATA_LOW 5 +#define CONFIG_SH_I2C_CLOCK 10000000 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ + +/* USB */ +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_RMOBILE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +/* MMCIF */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_MMC +#define CONFIG_SH_MMCIF +#define CONFIG_SH_MMCIF_ADDR 0xee200000 +#define CONFIG_SH_MMCIF_CLK 48000000 + +/* Module stop status bits */ +/* INTC-RT */ +#define CONFIG_SMSTP0_ENA 0x00400000 +/* MSIF */ +#define CONFIG_SMSTP2_ENA 0x00002000 +/* INTC-SYS, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 +/* SCIF2 */ +#define CONFIG_SMSTP7_ENA 0x00080000 + +#endif /* __SILK_H */ diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 8395372..3b06d30 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -18,6 +18,8 @@ #include <configs/exynos5250-common.h> +/* PMIC */ +#define CONFIG_POWER_MAX77686 #define CONFIG_BOARD_COMMON #define CONFIG_ARCH_EARLY_INIT_R diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 982d0dc..080fc3a 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -48,9 +48,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) -/* Small malloc pool before relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) - /* * select serial console configuration */ @@ -224,9 +221,5 @@ #define CONFIG_OF_LIBFDT #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL #endif /* __CONFIG_H */ diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 9fa644f..6c68596 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -21,11 +21,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* CPU */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/snow.h b/include/configs/snow.h index 7eaa586..fe802f2 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -20,7 +20,6 @@ #include <configs/exynos5-dt-common.h> -#define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */ #define CONFIG_POWER_TPS65090_I2C #define CONFIG_BOARD_COMMON diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 6b1f967..ee227fe 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -190,10 +190,6 @@ unsigned int cm_get_l4_sp_clk_hz(void); * QSPI support */ #ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */ -#define CONFIG_CMD_DM -#define CONFIG_DM -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH #define CONFIG_CADENCE_QSPI /* Enable multiple SPI NOR flash manufacturers */ #define CONFIG_SPI_FLASH /* SPI flash subsystem */ @@ -210,9 +206,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #endif #ifdef CONFIG_OF_CONTROL /* DW SPI is controlled via DT */ -#define CONFIG_CMD_DM -#define CONFIG_DM -#define CONFIG_DM_SPI #define CONFIG_DESIGNWARE_SPI #define CONFIG_CMD_SPI #endif diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index fd9bd63..156e0fa 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -28,21 +28,10 @@ (PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE) #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024) -#define CONFIG_SYS_MALLOC_F_LEN 0x2000 -#define CONFIG_DM /* serial port (PL011) configuration */ #define CONFIG_BAUDRATE 115200 -#ifdef CONFIG_DM -#define CONFIG_DM_SERIAL #define CONFIG_PL01X_SERIAL -#else -#define CONFIG_SYS_SERIAL0 0x80406000 -#define CONFIG_CONS_INDEX 0 -#define CONFIG_PL011_SERIAL -#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0} -#define CONFIG_PL011_CLOCK (2700 * 1000) -#endif /* user interface */ #define CONFIG_SYS_PROMPT "STV0991> " diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index 87d269b..1537e53 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -13,8 +13,6 @@ */ #define CONFIG_CLK_FULL_SPEED 1008000000 -#define CONFIG_MACH_TYPE 4104 - #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 @@ -25,4 +23,6 @@ */ #include <configs/sunxi-common.h> +#define CONFIG_MACH_TYPE (4104 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28)) + #endif /* __CONFIG_H */ diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index 52e3a6f..e755531 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -13,8 +13,6 @@ */ #define CONFIG_CLK_FULL_SPEED 1008000000 -#define CONFIG_MACH_TYPE 4138 - #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 @@ -25,4 +23,6 @@ */ #include <configs/sunxi-common.h> +#define CONFIG_MACH_TYPE (4138 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28)) + #endif /* __CONFIG_H */ diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 7cd7890..f817f73 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -14,8 +14,6 @@ */ #define CONFIG_CLK_FULL_SPEED 912000000 -#define CONFIG_MACH_TYPE 4283 - #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 @@ -31,4 +29,6 @@ */ #include <configs/sunxi-common.h> +#define CONFIG_MACH_TYPE (4283 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28)) + #endif /* __CONFIG_H */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 4a5cab2..bd7d049 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -13,26 +13,36 @@ #ifndef _SUNXI_COMMON_CONFIG_H #define _SUNXI_COMMON_CONFIG_H +#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT +/* + * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the + * expense of restricting some features, so the regular machine id values can + * be used. + */ +# define CONFIG_MACH_TYPE_COMPAT_REV 0 +#else +/* + * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. + * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass + * beyond the machine id check. + */ +# define CONFIG_MACH_TYPE_COMPAT_REV 1 +#endif + /* * High Level Configuration Options */ #define CONFIG_SUNXI /* sunxi family */ #ifdef CONFIG_SPL_BUILD -#ifndef CONFIG_SPL_FEL #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ #endif -#endif #include <asm/arch/cpu.h> /* get chip and board defs */ #define CONFIG_SYS_TEXT_BASE 0x4a000000 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM) -# define CONFIG_CMD_DM -# define CONFIG_DM_GPIO -# define CONFIG_DM_SERIAL # define CONFIG_DW_SERIAL -# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif /* @@ -146,10 +156,10 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_BOARD_LOAD_IMAGE + #ifdef CONFIG_SPL_FEL -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds" -#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi" #define CONFIG_SPL_TEXT_BASE 0x2000 #define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */ @@ -181,11 +191,30 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */ /* I2C */ +#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER #define CONFIG_SPL_I2C_SUPPORT +#endif + #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI #define CONFIG_SYS_I2C_SPEED 400000 #define CONFIG_SYS_I2C_SLAVE 0x7f + +#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) +#define CONFIG_SYS_I2C_SOFT +#define CONFIG_SYS_I2C_SOFT_SPEED 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 +#define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ +#define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ +/* We use pin names in Kconfig and sunxi_name_to_gpio() */ +#define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda +#define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl +#ifndef __ASSEMBLY__ +extern int soft_i2c_gpio_sda; +extern int soft_i2c_gpio_scl; +#endif +#endif + #define CONFIG_CMD_I2C /* PMU */ @@ -197,6 +226,20 @@ #define CONFIG_CONS_INDEX 1 /* UART0 */ #endif +#if CONFIG_CONS_INDEX == 1 +#ifdef CONFIG_MACH_SUN9I +#define OF_STDOUT_PATH "/soc/serial@07000000:115200" +#else +#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" +#endif +#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) +#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" +#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) +#define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" +#else +#error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. +#endif + /* GPIO */ #define CONFIG_SUNXI_GPIO #define CONFIG_SPL_GPIO_SUPPORT @@ -204,10 +247,10 @@ #ifdef CONFIG_VIDEO /* - * The amount of RAM that is reserved for the FB. This will not show up as - * RAM to the kernel, but will be reclaimed by a KMS driver in future. + * The amount of RAM to keep free at the top of RAM when relocating u-boot, + * to use as framebuffer. This must be a multiple of 4096. */ -#define CONFIG_SUNXI_FB_SIZE (9 << 20) +#define CONFIG_SUNXI_MAX_FB_SIZE (9 << 20) /* Do we want to initialize a simple FB? */ #define CONFIG_VIDEO_DT_SIMPLEFB @@ -225,8 +268,6 @@ /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ #define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF) - /* To be able to hook simplefb into dt */ #ifdef CONFIG_VIDEO_DT_SIMPLEFB #define CONFIG_OF_BOARD_SETUP diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 65468ad..2cf4558 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -21,9 +21,6 @@ */ #include <asm/hardware.h> -#define MACH_TYPE_TAURUS 2067 -#define MACH_TYPE_AXM 2068 - #define CONFIG_SYS_GENERIC_BOARD #if defined(CONFIG_SPL_BUILD) @@ -121,6 +118,12 @@ #define CONFIG_RMII #define CONFIG_AT91_WANTS_COMMON_PHY +#define CONFIG_AT91SAM9_WATCHDOG +#if !defined(CONFIG_SPL_BUILD) +/* Enable the watchdog */ +#define CONFIG_HW_WATCHDOG +#endif + /* USB */ #if defined(CONFIG_BOARD_TAURUS) #define CONFIG_USB_ATMEL diff --git a/include/configs/tb100.h b/include/configs/tb100.h index e9218f7..46df406 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -12,21 +12,11 @@ /* * CPU configuration */ -#define CONFIG_ARC700 -#define CONFIG_ARC_MMU_VER 3 -#define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ /* - * Board configuration - */ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_ARCH_EARLY_INIT_R - -/* * Memory configuration */ -#define CONFIG_SYS_TEXT_BASE 0x84000000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 8f1e370..005fc6a 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -18,16 +18,6 @@ #include <asm/arch/tegra.h> /* get chip and board defs */ -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#ifndef CONFIG_SPL_BUILD -#define CONFIG_DM_SERIAL -#endif -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH -#define CONFIG_DM_I2C - #define CONFIG_SYS_TIMER_RATE 1000000 #define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE @@ -47,7 +37,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */ diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 5ed86d9..20a55f4 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -20,12 +20,7 @@ #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC #ifndef CONFIG_SPL_BUILD -# define CONFIG_DM -# define CONFIG_CMD_DM -# define CONFIG_DM_GPIO -# define CONFIG_DM_SERIAL # define CONFIG_OMAP_SERIAL -# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif #include <asm/arch/omap.h> diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 3c634ee..840e108 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -19,12 +19,7 @@ #include <asm/arch/omap3.h> #ifndef CONFIG_SPL_BUILD -# define CONFIG_DM -# define CONFIG_CMD_DM -# define CONFIG_DM_GPIO -# define CONFIG_DM_SERIAL # define CONFIG_OMAP_SERIAL -# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif /* The chip has SDRC controller */ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 5a53c50..3f738fb 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012-2014 Panasonic Corporation + * Copyright (C) 2012-2015 Panasonic Corporation * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -43,6 +43,9 @@ #define CONFIG_SDRAM1_SIZE 0x10000000 #endif +#define CONFIG_I2C_EEPROM +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + /* * Support card address map */ @@ -77,8 +80,6 @@ #define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE #define CONFIG_SMC911X_32_BIT -#define CONFIG_SYS_MALLOC_F_LEN 0x2000 - /*----------------------------------------------------------------------- * MMU and Cache Setting *----------------------------------------------------------------------*/ @@ -92,6 +93,8 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_MISC_INIT_F +#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_BOARD_LATE_INIT @@ -187,8 +190,6 @@ #define CONFIG_FAT_WRITE #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_DM - /* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) @@ -232,11 +233,16 @@ "image_offset=0x00080000\0" \ "image_size=0x00f00000\0" \ "verify=n\0" \ - "norboot=run add_default_bootargs;" \ + "nandupdate=nand erase 0 0x100000 &&" \ + "tftpboot u-boot-spl.bin &&" \ + "nand write $loadaddr 0 0x10000 &&" \ + "tftpboot u-boot-dtb.img &&" \ + "nand write $loadaddr 0x10000 0xf0000\0" \ + "norboot=run add_default_bootargs &&" \ "bootm $image_offset\0" \ - "nandboot=run add_default_bootargs;" \ - "nand read $loadaddr $image_offset $image_size;" \ - "bootm\0" \ + "nandboot=run add_default_bootargs &&" \ + "nand read $loadaddr $image_offset $image_size &&" \ + "bootm\0" \ "add_default_bootargs=setenv bootargs $bootargs" \ " console=ttyS0,$baudrate\0" \ @@ -266,8 +272,6 @@ #define CONFIG_SPL_TEXT_BASE 0x00100000 #endif -#define CONFIG_BOARD_POSTCLK_INIT - #ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT #endif diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 027d78b..7fb28a5 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -11,9 +11,9 @@ /* We use generic board for v8 Versatile Express */ #define CONFIG_SYS_GENERIC_BOARD -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #ifndef CONFIG_SEMIHOSTING -#error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING +#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING #endif #define CONFIG_BOARD_LATE_INIT #define CONFIG_ARMV8_SWITCH_TO_EL1 @@ -21,8 +21,9 @@ #define CONFIG_REMAKE_ELF -#ifndef CONFIG_BASE_FVP -/* Base FVP not using GICv3 yet */ +#if !defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) && \ + !defined(CONFIG_TARGET_VEXPRESS64_JUNO) +/* Base FVP and Juno not using GICv3 yet */ #define CONFIG_GICV3 #endif @@ -40,10 +41,13 @@ #define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a" /* Link Definitions */ -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP /* ATF loads u-boot here for BASE_FVP model */ #define CONFIG_SYS_TEXT_BASE 0x88000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) +#elif CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_SYS_TEXT_BASE 0xe0000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #else #define CONFIG_SYS_TEXT_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) @@ -54,7 +58,7 @@ /* SMP Spin Table Definitions */ -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) #else #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) @@ -88,10 +92,15 @@ #define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6)) #define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7)) +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define V2M_UART0 0x7ff80000 +#define V2M_UART1 0x7ff70000 +#else /* Not Juno */ #define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9)) #define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10)) #define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11)) #define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12)) +#endif #define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15)) @@ -119,9 +128,12 @@ #define GICR_BASE (0x2f100000) #else -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #define GICD_BASE (0x2f000000) #define GICC_BASE (0x2c000000) +#elif CONFIG_TARGET_VEXPRESS64_JUNO +#define GICD_BASE (0x2C010000) +#define GICC_BASE (0x2C02f000) #else #define GICD_BASE (0x2C001000) #define GICC_BASE (0x2C002000) @@ -140,7 +152,11 @@ /* PL011 Serial Configuration */ #define CONFIG_PL011_SERIAL +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_PL011_CLOCK 7273800 +#else #define CONFIG_PL011_CLOCK 24000000 +#endif #define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ (void *)CONFIG_SYS_SERIAL1} #define CONFIG_CONS_INDEX 0 @@ -161,6 +177,7 @@ #define CONFIG_CMD_ENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI +#define CONFIG_CMD_LOADB #define CONFIG_CMD_MEMORY #define CONFIG_CMD_MII #define CONFIG_CMD_NET @@ -191,7 +208,7 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* Initial environment variables */ -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_name=uImage\0" \ "kernel_addr_r=0x80000000\0" \ diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 7e78f8a..2dea921 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -122,7 +122,7 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_SYS_L2CACHE_OFF 1 #define CONFIG_INITRD_TAG 1 - +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_OF_LIBFDT 1 /* Size of malloc() pool */ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 809017c..117d1f7 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -175,7 +175,7 @@ "if i2c probe 0x10; then " \ "setenv bootargs ${bootargs} " \ "video=mxcfb${nextcon}:dev=lcd,800x480@60," \ - "if=RGB666; " \ + "if=RGB666,bpp=32; " \ "if test 0 -eq ${nextcon}; then " \ "setenv fbmem fbmem=10M; " \ "else " \ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index ecedfc3..994874c 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -22,11 +22,6 @@ #define CONFIG_DISPLAY_BOARDINFO_LATE #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL - #define CONFIG_LMB #define CONFIG_OF_LIBFDT @@ -39,7 +34,6 @@ /* SATA AHCI storage */ #define CONFIG_SCSI_AHCI -#define CONFIG_SATA_INTEL #ifdef CONFIG_SCSI_AHCI #define CONFIG_LIBATA #define CONFIG_SYS_64BIT_LBA @@ -193,7 +187,6 @@ #define CONFIG_SYS_STACK_SIZE (32 * 1024) #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MALLOC_LEN 0x200000 -#define CONFIG_SYS_MALLOC_F_LEN (2 << 10) /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -245,6 +238,9 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTSTAGE +#define CONFIG_CMD_BOOTSTAGE + #define CONFIG_CMD_USB #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 2d28e89..864528a 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -276,17 +276,11 @@ #define CONFIG_OF_LIBFDT /* FIT support */ -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */ /* FDT support */ #define CONFIG_DISPLAY_BOARDINFO_LATE -/* RSA support */ -#define CONFIG_FIT_SIGNATURE -#define CONFIG_RSA - /* Extend size of kernel image for uncompression */ #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) diff --git a/include/cros_ec.h b/include/cros_ec.h index 9e13146..8457c80 100644 --- a/include/cros_ec.h +++ b/include/cros_ec.h @@ -13,6 +13,7 @@ #include <ec_commands.h> #include <fdtdec.h> #include <cros_ec_message.h> +#include <asm/gpio.h> #ifndef CONFIG_DM_CROS_EC /* Which interface is the device on? */ @@ -39,7 +40,7 @@ struct cros_ec_dev { unsigned int bus_num; /* Bus number (for I2C) */ unsigned int max_frequency; /* Maximum interface frequency */ #endif - struct fdt_gpio_state ec_int; /* GPIO used as EC interrupt line */ + struct gpio_desc ec_int; /* GPIO used as EC interrupt line */ int protocol_version; /* Protocol version to use */ int optimise_flash_write; /* Don't write erased flash blocks */ diff --git a/include/debug_uart.h b/include/debug_uart.h new file mode 100644 index 0000000..f56797b --- /dev/null +++ b/include/debug_uart.h @@ -0,0 +1,139 @@ +/* + * Early debug UART support + * + * (C) Copyright 2014 Google, Inc + * Writte by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _DEBUG_UART_H +#define _DEBUG_UART_H + +#include <linux/linkage.h> + +/* + * The debug UART is intended for use very early in U-Boot to debug problems + * when an ICE or other debug mechanism is not available. + * + * To use it you should: + * - Make sure your UART supports this interface + * - Enable CONFIG_DEBUG_UART + * - Enable the CONFIG for your UART to tell it to provide this interface + * (e.g. CONFIG_DEBUG_UART_NS16550) + * - Define the required settings as needed (see below) + * - Call debug_uart_init() before use + * - Call printch() to output a character + * + * Depending on your platform it may be possible to use this UART before a + * stack is available. + * + * If your UART does not support this interface you can probably add support + * quite easily. Remember that you cannot use driver model and it is preferred + * to use no stack. + * + * You must not use this UART once driver model is working and the serial + * drivers are up and running (done in serial_init()). Otherwise the drivers + * may conflict and you will get strange output. + * + * + * To enable the debug UART in your serial driver: + * + * - #include <debug_uart.h> + * - Define debug_uart_init(), trying to avoid using the stack + * - Define _debug_uart_putc() as static inline (avoiding stack usage) + * - Immediately afterwards, add DEBUG_UART_FUNCS to define the rest of the + * functionality (printch(), etc.) + */ + +/** + * debug_uart_init() - Set up the debug UART ready for use + * + * This sets up the UART with the correct baud rate, etc. + * + * Available CONFIG is: + * + * - CONFIG_DEBUG_UART_BASE: Base address of UART + * - CONFIG_BAUDRATE: Requested baud rate + * - CONFIG_DEBUG_UART_CLOCK: Input clock for UART + */ +void debug_uart_init(void); + +/** + * printch() - Output a character to the debug UART + * + * @ch: Character to output + */ +asmlinkage void printch(int ch); + +/** + * printascii() - Output an ASCII string to the debug UART + * + * @str: String to output + */ +asmlinkage void printascii(const char *str); + +/** + * printhex2() - Output a 2-digit hex value + * + * @value: Value to output + */ +asmlinkage void printhex2(uint value); + +/** + * printhex4() - Output a 4-digit hex value + * + * @value: Value to output + */ +asmlinkage void printhex4(uint value); + +/** + * printhex8() - Output a 8-digit hex value + * + * @value: Value to output + */ +asmlinkage void printhex8(uint value); + +/* + * Now define some functions - this should be inserted into the serial driver + */ +#define DEBUG_UART_FUNCS \ + asmlinkage void printch(int ch) \ + { \ + _debug_uart_putc(ch); \ + } \ +\ + asmlinkage void printascii(const char *str) \ + { \ + while (*str) \ + _debug_uart_putc(*str++); \ + } \ +\ + static inline void printhex1(uint digit) \ + { \ + digit &= 0xf; \ + _debug_uart_putc(digit > 9 ? digit - 10 + 'a' : digit + '0'); \ + } \ +\ + static inline void printhex(uint value, int digits) \ + { \ + while (digits-- > 0) \ + printhex1(value >> (4 * digits)); \ + } \ +\ + asmlinkage void printhex2(uint value) \ + { \ + printhex(value, 2); \ + } \ +\ + asmlinkage void printhex4(uint value) \ + { \ + printhex(value, 4); \ + } \ +\ + asmlinkage void printhex8(uint value) \ + { \ + printhex(value, 8); \ + } + +#endif diff --git a/include/dm-demo.h b/include/dm-demo.h index a24fec6..03722d0 100644 --- a/include/dm-demo.h +++ b/include/dm-demo.h @@ -25,10 +25,14 @@ struct dm_demo_pdata { struct demo_ops { int (*hello)(struct udevice *dev, int ch); int (*status)(struct udevice *dev, int *status); + int (*set_light)(struct udevice *dev, int light); + int (*get_light)(struct udevice *dev); }; int demo_hello(struct udevice *dev, int ch); int demo_status(struct udevice *dev, int *status); +int demo_set_light(struct udevice *dev, int light); +int demo_get_light(struct udevice *dev); int demo_list(void); int demo_parse_dt(struct udevice *dev); diff --git a/include/dm/device-internal.h b/include/dm/device-internal.h index f0cc794..e2418fe 100644 --- a/include/dm/device-internal.h +++ b/include/dm/device-internal.h @@ -101,7 +101,11 @@ static inline int device_remove(struct udevice *dev) { return 0; } * @dev: Pointer to device to unbind * @return 0 if OK, -ve on error */ +#ifdef CONFIG_DM_DEVICE_REMOVE int device_unbind(struct udevice *dev); +#else +static inline int device_unbind(struct udevice *dev) { return 0; } +#endif #ifdef CONFIG_DM_DEVICE_REMOVE void device_free(struct udevice *dev); diff --git a/include/dm/device.h b/include/dm/device.h index 13598a1..7a48eb8 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -12,6 +12,7 @@ #define _DM_DEVICE_H #include <dm/uclass-id.h> +#include <fdtdec.h> #include <linker_lists.h> #include <linux/list.h> @@ -26,6 +27,9 @@ struct driver_info; /* DM should init this device prior to relocation */ #define DM_FLAG_PRE_RELOC (1 << 2) +/* DM is responsible for allocating and freeing parent_platdata */ +#define DM_FLAG_ALLOC_PARENT_PDATA (1 << 3) + /** * struct udevice - An instance of a driver * @@ -46,6 +50,7 @@ struct driver_info; * @driver: The driver used by this device * @name: Name of device, typically the FDT node name * @platdata: Configuration data for this device + * @parent_platdata: The parent bus's configuration data for this device * @of_offset: Device tree node offset for this device (- for none) * @of_id: Pointer to the udevice_id structure which created the device * @parent: Parent of this device, or NULL for the top level device @@ -65,6 +70,7 @@ struct udevice { struct driver *driver; const char *name; void *platdata; + void *parent_platdata; int of_offset; const struct udevice_id *of_id; struct udevice *parent; @@ -127,6 +133,7 @@ struct udevice_id { * @remove: Called to remove a device, i.e. de-activate it * @unbind: Called to unbind a device from its driver * @ofdata_to_platdata: Called before probe to decode device tree data + * @child_post_bind: Called after a new child has been bound * @child_pre_probe: Called before a child device is probed. The device has * memory allocated but it has not yet been probed. * @child_post_remove: Called after a child device is removed. The device @@ -146,6 +153,9 @@ struct udevice_id { * device_probe_child() pass it in. So far the use case for allocating it * is SPI, but I found that unsatisfactory. Since it is here I will leave it * until things are clearer. + * @per_child_platdata_auto_alloc_size: A bus likes to store information about + * its children. If non-zero this is the size of this data, to be allocated + * in the child's parent_platdata pointer. * @ops: Driver-specific operations. This is typically a list of function * pointers defined by the driver, to implement driver functions required by * the uclass. @@ -160,11 +170,13 @@ struct driver { int (*remove)(struct udevice *dev); int (*unbind)(struct udevice *dev); int (*ofdata_to_platdata)(struct udevice *dev); + int (*child_post_bind)(struct udevice *dev); int (*child_pre_probe)(struct udevice *dev); int (*child_post_remove)(struct udevice *dev); int priv_auto_alloc_size; int platdata_auto_alloc_size; int per_child_auto_alloc_size; + int per_child_platdata_auto_alloc_size; const void *ops; /* driver-specific operations */ uint32_t flags; }; @@ -184,6 +196,16 @@ struct driver { void *dev_get_platdata(struct udevice *dev); /** + * dev_get_parent_platdata() - Get the parent platform data for a device + * + * This checks that dev is not NULL, but no other checks for now + * + * @dev Device to check + * @return parent's platform data, or NULL if none + */ +void *dev_get_parent_platdata(struct udevice *dev); + +/** * dev_get_parentdata() - Get the parent data for a device * * The parent data is data stored in the device but owned by the parent. @@ -224,6 +246,14 @@ struct udevice *dev_get_parent(struct udevice *child); */ ulong dev_get_of_data(struct udevice *dev); +/* + * device_get_uclass_id() - return the uclass ID of a device + * + * @dev: Device to check + * @return uclass ID for the device + */ +enum uclass_id device_get_uclass_id(struct udevice *dev); + /** * device_get_child() - Get the child of a device by index * @@ -322,4 +352,13 @@ int device_find_first_child(struct udevice *parent, struct udevice **devp); */ int device_find_next_child(struct udevice **devp); +/** + * dev_get_addr() - Get the reg property of a device + * + * @dev: Pointer to a device + * + * @return addr + */ +fdt_addr_t dev_get_addr(struct udevice *dev); + #endif diff --git a/include/dm/platform_data/serial_sh.h b/include/dm/platform_data/serial_sh.h new file mode 100644 index 0000000..0271ad6 --- /dev/null +++ b/include/dm/platform_data/serial_sh.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * Copyright (c) 2014 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __serial_sh_h +#define __serial_sh_h + +enum sh_clk_mode { + INT_CLK, + EXT_CLK, +}; + +enum sh_serial_type { + PORT_SCI, + PORT_SCIF, + PORT_SCIFA, + PORT_SCIFB, +}; + +/* + * Information about SCIF port + * + * @base: Register base address + * @clk: Input clock rate, used for calculating the baud rate divisor + * @clk_mode: Clock mode, set internal (INT) or external (EXT) + * @type: Type of SCIF + */ +struct sh_serial_platdata { + unsigned long base; + unsigned int clk; + enum sh_clk_mode clk_mode; + enum sh_serial_type type; +}; +#endif /* __serial_sh_h */ diff --git a/include/dm/test.h b/include/dm/test.h index f08c05d..707c69e 100644 --- a/include/dm/test.h +++ b/include/dm/test.h @@ -67,6 +67,8 @@ enum { struct dm_test_priv { int ping_total; int op_count[DM_TEST_OP_COUNT]; + int uclass_flag; + int uclass_total; }; /** @@ -88,6 +90,7 @@ struct dm_test_uclass_priv { * * @sum: Test value used to check parent data works correctly * @flag: Used to track calling of parent operations + * @uclass_flag: Used to track calling of parent operations by uclass */ struct dm_test_parent_data { int sum; diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index f17c3c2..91bb90d 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -33,6 +33,7 @@ enum uclass_id { UCLASS_I2C, /* I2C bus */ UCLASS_I2C_GENERIC, /* Generic I2C device */ UCLASS_I2C_EEPROM, /* I2C EEPROM device */ + UCLASS_MOD_EXP, /* RSA Mod Exp device */ UCLASS_COUNT, UCLASS_INVALID = -1, diff --git a/include/dm/uclass-internal.h b/include/dm/uclass-internal.h index f718f37..f2f254a 100644 --- a/include/dm/uclass-internal.h +++ b/include/dm/uclass-internal.h @@ -44,6 +44,17 @@ int uclass_bind_device(struct udevice *dev); int uclass_unbind_device(struct udevice *dev); /** + * uclass_pre_probe_child() - Deal with a child that is about to be probed + * + * Perform any pre-processing that is needed by the uclass before it can be + * probed. + * + * @dev: Pointer to the device + * #return 0 on success, -ve on error + */ +int uclass_pre_probe_child(struct udevice *dev); + +/** * uclass_post_probe_device() - Deal with a device that has just been probed * * Perform any post-processing of a probed device that is needed by the diff --git a/include/dm/uclass.h b/include/dm/uclass.h index f6ec6d7..d6c40c6 100644 --- a/include/dm/uclass.h +++ b/include/dm/uclass.h @@ -40,6 +40,9 @@ struct uclass { struct udevice; +/* Members of this uclass sequence themselves with aliases */ +#define DM_UC_FLAG_SEQ_ALIAS (1 << 0) + /** * struct uclass_driver - Driver for the uclass * @@ -52,6 +55,7 @@ struct udevice; * @pre_unbind: Called before a device is unbound from this uclass * @post_probe: Called after a new device is probed * @pre_remove: Called before a device is removed + * @child_post_bind: Called after a child is bound to a device in this uclass * @init: Called to set up the uclass * @destroy: Called to destroy the uclass * @priv_auto_alloc_size: If non-zero this is the size of the private data @@ -60,8 +64,16 @@ struct udevice; * @per_device_auto_alloc_size: Each device can hold private data owned * by the uclass. If required this will be automatically allocated if this * value is non-zero. + * @per_child_auto_alloc_size: Each child device (of a parent in this + * uclass) can hold parent data for the device/uclass. This value is only + * used as a falback if this member is 0 in the driver. + * @per_child_platdata_auto_alloc_size: A bus likes to store information about + * its children. If non-zero this is the size of this data, to be allocated + * in the child device's parent_platdata pointer. This value is only used as + * a falback if this member is 0 in the driver. * @ops: Uclass operations, providing the consistent interface to devices * within the uclass. + * @flags: Flags for this uclass (DM_UC_...) */ struct uclass_driver { const char *name; @@ -70,11 +82,16 @@ struct uclass_driver { int (*pre_unbind)(struct udevice *dev); int (*post_probe)(struct udevice *dev); int (*pre_remove)(struct udevice *dev); + int (*child_post_bind)(struct udevice *dev); + int (*child_pre_probe)(struct udevice *dev); int (*init)(struct uclass *class); int (*destroy)(struct uclass *class); int priv_auto_alloc_size; int per_device_auto_alloc_size; + int per_child_auto_alloc_size; + int per_child_platdata_auto_alloc_size; const void *ops; + uint32_t flags; }; /* Declare a new uclass_driver */ @@ -141,6 +158,8 @@ int uclass_get_device_by_of_offset(enum uclass_id id, int node, /** * uclass_first_device() - Get the first device in a uclass * + * The device returned is probed if necessary, and ready for use + * * @id: Uclass ID to look up * @devp: Returns pointer to the first device in that uclass, or NULL if none * @return 0 if OK (found or not found), -1 on error @@ -150,6 +169,8 @@ int uclass_first_device(enum uclass_id id, struct udevice **devp); /** * uclass_next_device() - Get the next device in a uclass * + * The device returned is probed if necessary, and ready for use + * * @devp: On entry, pointer to device to lookup. On exit, returns pointer * to the next device in the same uclass, or NULL if none * @return 0 if OK (found or not found), -1 on error diff --git a/include/dt-bindings/mrc/quark.h b/include/dt-bindings/mrc/quark.h new file mode 100644 index 0000000..e3ca8a2 --- /dev/null +++ b/include/dt-bindings/mrc/quark.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Intel Quark MRC bindings include several properties + * as part of an Intel Quark MRC node. In most cases, + * the value of these properties uses the standard values + * defined in this header. + */ + +#ifndef _DT_BINDINGS_QRK_MRC_H_ +#define _DT_BINDINGS_QRK_MRC_H_ + +/* MRC platform data flags */ +#define MRC_FLAG_ECC_EN 0x00000001 +#define MRC_FLAG_SCRAMBLE_EN 0x00000002 +#define MRC_FLAG_MEMTEST_EN 0x00000004 +/* 0b DDR "fly-by" topology else 1b DDR "tree" topology */ +#define MRC_FLAG_TOP_TREE_EN 0x00000008 +/* If set ODR signal is asserted to DRAM devices on writes */ +#define MRC_FLAG_WR_ODT_EN 0x00000010 + +/* DRAM width */ +#define DRAM_WIDTH_X8 0 +#define DRAM_WIDTH_X16 1 +#define DRAM_WIDTH_X32 2 + +/* DRAM speed */ +#define DRAM_FREQ_800 0 +#define DRAM_FREQ_1066 1 + +/* DRAM type */ +#define DRAM_TYPE_DDR3 0 +#define DRAM_TYPE_DDR3L 1 + +/* DRAM rank mask */ +#define DRAM_RANK(n) (1 << (n)) + +/* DRAM channel mask */ +#define DRAM_CHANNEL(n) (1 << (n)) + +/* DRAM channel width */ +#define DRAM_CHANNEL_WIDTH_X8 0 +#define DRAM_CHANNEL_WIDTH_X16 1 +#define DRAM_CHANNEL_WIDTH_X32 2 + +/* DRAM address mode */ +#define DRAM_ADDR_MODE0 0 +#define DRAM_ADDR_MODE1 1 +#define DRAM_ADDR_MODE2 2 + +/* DRAM refresh rate */ +#define DRAM_REFRESH_RATE_195US 1 +#define DRAM_REFRESH_RATE_39US 2 +#define DRAM_REFRESH_RATE_785US 3 + +/* DRAM SR temprature range */ +#define DRAM_SRT_RANGE_NORMAL 0 +#define DRAM_SRT_RANGE_EXTENDED 1 + +/* DRAM ron value */ +#define DRAM_RON_34OHM 0 +#define DRAM_RON_40OHM 1 + +/* DRAM rtt nom value */ +#define DRAM_RTT_NOM_40OHM 0 +#define DRAM_RTT_NOM_60OHM 1 +#define DRAM_RTT_NOM_120OHM 2 + +/* DRAM rd odt value */ +#define DRAM_RD_ODT_OFF 0 +#define DRAM_RD_ODT_60OHM 1 +#define DRAM_RD_ODT_120OHM 2 +#define DRAM_RD_ODT_180OHM 3 + +/* DRAM density */ +#define DRAM_DENSITY_512M 0 +#define DRAM_DENSITY_1G 1 +#define DRAM_DENSITY_2G 2 +#define DRAM_DENSITY_4G 3 + +#endif /* _DT_BINDINGS_QRK_MRC_H_ */ diff --git a/include/dwmmc.h b/include/dwmmc.h index 109f7c8..86a5491 100644 --- a/include/dwmmc.h +++ b/include/dwmmc.h @@ -141,9 +141,9 @@ struct dwmci_host { int dev_index; int dev_id; int buswidth; - u32 clksel_val; u32 fifoth_val; struct mmc *mmc; + void *priv; void (*clksel)(struct dwmci_host *host); void (*board_init)(struct dwmci_host *host); diff --git a/include/exports.h b/include/exports.h index 41d5085..205affe 100644 --- a/include/exports.h +++ b/include/exports.h @@ -3,6 +3,8 @@ #ifndef __ASSEMBLY__ +struct spi_slave; + /* These are declarations of exported functions available in C code */ unsigned long get_version(void); int getc(void); @@ -10,22 +12,23 @@ int tstc(void); void putc(const char); void puts(const char*); int printf(const char* fmt, ...); -void install_hdlr(int, void (*interrupt_handler_t)(void *), void*); +void install_hdlr(int, interrupt_handler_t, void*); void free_hdlr(int); void *malloc(size_t); void free(void*); void __udelay(unsigned long); unsigned long get_timer(unsigned long); int vprintf(const char *, va_list); -unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base); +unsigned long simple_strtoul(const char *cp, char **endp, unsigned int base); int strict_strtoul(const char *cp, unsigned int base, unsigned long *res); char *getenv (const char *name); int setenv (const char *varname, const char *varvalue); -long simple_strtol(const char *cp,char **endp,unsigned int base); -int strcmp(const char * cs,const char * ct); +long simple_strtol(const char *cp, char **endp, unsigned int base); +int strcmp(const char *cs, const char *ct); unsigned long ustrtoul(const char *cp, char **endp, unsigned int base); unsigned long long ustrtoull(const char *cp, char **endp, unsigned int base); -#if defined(CONFIG_CMD_I2C) +#if defined(CONFIG_CMD_I2C) && \ + (!defined(CONFIG_DM_I2C) || defined(CONFIG_DM_I2C_COMPAT)) int i2c_write (uchar, uint, int , uchar* , int); int i2c_read (uchar, uint, int , uchar* , int); #endif @@ -34,15 +37,14 @@ void app_startup(char * const *); #endif /* ifndef __ASSEMBLY__ */ -enum { -#define EXPORT_FUNC(x) XF_ ## x , +struct jt_funcs { +#define EXPORT_FUNC(impl, res, func, ...) res(*func)(__VA_ARGS__); #include <_exports.h> #undef EXPORT_FUNC - - XF_MAX }; -#define XF_VERSION 6 + +#define XF_VERSION 7 #if defined(CONFIG_X86) extern gd_t *global_data; diff --git a/include/exynos_lcd.h b/include/exynos_lcd.h new file mode 100644 index 0000000..cf389da --- /dev/null +++ b/include/exynos_lcd.h @@ -0,0 +1,81 @@ +/* + * exynos_lcd.h - Exynos LCD Controller structures + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _EXYNOS_LCD_H_ +#define _EXYNOS_LCD_H_ + +enum { + FIMD_RGB_INTERFACE = 1, + FIMD_CPU_INTERFACE = 2, +}; + +enum exynos_fb_rgb_mode_t { + MODE_RGB_P = 0, + MODE_BGR_P = 1, + MODE_RGB_S = 2, + MODE_BGR_S = 3, +}; + +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 640) */ + ushort vl_row; /* Number of rows (i.e. 480) */ + ushort vl_width; /* Width of display area in millimeters */ + ushort vl_height; /* Height of display area in millimeters */ + + /* LCD configuration register */ + u_char vl_freq; /* Frequency */ + u_char vl_clkp; /* Clock polarity */ + u_char vl_oep; /* Output Enable polarity */ + u_char vl_hsp; /* Horizontal Sync polarity */ + u_char vl_vsp; /* Vertical Sync polarity */ + u_char vl_dp; /* Data polarity */ + u_char vl_bpix; /* Bits per pixel */ + + /* Horizontal control register. Timing from data sheet */ + u_char vl_hspw; /* Horz sync pulse width */ + u_char vl_hfpd; /* Wait before of line */ + u_char vl_hbpd; /* Wait end of line */ + + /* Vertical control register. */ + u_char vl_vspw; /* Vertical sync pulse width */ + u_char vl_vfpd; /* Wait before of frame */ + u_char vl_vbpd; /* Wait end of frame */ + u_char vl_cmd_allow_len; /* Wait end of frame */ + + unsigned int win_id; + unsigned int init_delay; + unsigned int power_on_delay; + unsigned int reset_delay; + unsigned int interface_mode; + unsigned int mipi_enabled; + unsigned int dp_enabled; + unsigned int cs_setup; + unsigned int wr_setup; + unsigned int wr_act; + unsigned int wr_hold; + unsigned int logo_on; + unsigned int logo_width; + unsigned int logo_height; + int logo_x_offset; + int logo_y_offset; + unsigned long logo_addr; + unsigned int rgb_mode; + unsigned int resolution; + + /* parent clock name(MPLL, EPLL or VPLL) */ + unsigned int pclk_name; + /* ratio value for source clock from parent clock. */ + unsigned int sclk_div; + + unsigned int dual_lcd_enabled; +} vidinfo_t; + +void init_panel_info(vidinfo_t *vid); + +#endif diff --git a/include/fdt_simplefb.h b/include/fdt_simplefb.h new file mode 100644 index 0000000..8c89a19 --- /dev/null +++ b/include/fdt_simplefb.h @@ -0,0 +1,14 @@ +/* + * Simplefb device tree support + * + * (C) Copyright 2015 + * Stephen Warren <swarren@wwwdotorg.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _FDT_SIMPLEFB_H_ +#define _FDT_SIMPLEFB_H_ +int lcd_dt_simplefb_add_node(void *blob); +int lcd_dt_simplefb_enable_existing_node(void *blob); +#endif diff --git a/include/fdt_support.h b/include/fdt_support.h index 1f19fe4..ae5e8a3 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -100,7 +100,7 @@ void ft_pci_setup(void *blob, bd_t *bd); */ int ft_system_setup(void *blob, bd_t *bd); -void set_working_fdt_addr(void *addr); +void set_working_fdt_addr(ulong addr); int fdt_shrink_to_minimum(void *blob); int fdt_increase_size(void *fdt, int add_len); diff --git a/include/fdtdec.h b/include/fdtdec.h index 8c2bd21..1bc70db 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -115,9 +115,6 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA20_USB, /* Tegra20 USB port */ COMPAT_NVIDIA_TEGRA30_USB, /* Tegra30 USB port */ COMPAT_NVIDIA_TEGRA114_USB, /* Tegra114 USB port */ - COMPAT_NVIDIA_TEGRA114_I2C, /* Tegra114 I2C w/single clock source */ - COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra20 i2c */ - COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra20 dvc (really just i2c) */ COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */ COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */ COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra20 Keyboard */ @@ -127,9 +124,6 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA124_SDMMC, /* Tegra124 SDMMC controller */ COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */ COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */ - COMPAT_NVIDIA_TEGRA20_SFLASH, /* Tegra 2 SPI flash controller */ - COMPAT_NVIDIA_TEGRA20_SLINK, /* Tegra 2 SPI SLINK controller */ - COMPAT_NVIDIA_TEGRA114_SPI, /* Tegra 114 SPI controller */ COMPAT_NVIDIA_TEGRA124_PCIE, /* Tegra 124 PCIe controller */ COMPAT_NVIDIA_TEGRA30_PCIE, /* Tegra 30 PCIe controller */ COMPAT_NVIDIA_TEGRA20_PCIE, /* Tegra 20 PCIe controller */ @@ -140,7 +134,6 @@ enum fdt_compat_id { COMPAT_SAMSUNG_S3C2440_I2C, /* Exynos I2C Controller */ COMPAT_SAMSUNG_EXYNOS5_SOUND, /* Exynos Sound */ COMPAT_WOLFSON_WM8994_CODEC, /* Wolfson WM8994 Sound Codec */ - COMPAT_SAMSUNG_EXYNOS_SPI, /* Exynos SPI */ COMPAT_GOOGLE_CROS_EC, /* Google CROS_EC Protocol */ COMPAT_GOOGLE_CROS_EC_KEYB, /* Google CROS_EC Keyboard */ COMPAT_SAMSUNG_EXYNOS_EHCI, /* Exynos EHCI controller */ @@ -174,42 +167,63 @@ enum fdt_compat_id { COMPAT_INTEL_GMA, /* Intel Graphics Media Accelerator */ COMPAT_AMS_AS3722, /* AMS AS3722 PMIC */ COMPAT_INTEL_ICH_SPI, /* Intel ICH7/9 SPI controller */ + COMPAT_INTEL_QRK_MRC, /* Intel Quark MRC */ COMPAT_COUNT, }; -/* GPIOs are numbered from 0 */ -enum { - FDT_GPIO_NONE = -1U, /* an invalid GPIO used to end our list */ - - FDT_GPIO_ACTIVE_LOW = 1 << 0, /* input is active low (else high) */ -}; - -/* This is the state of a GPIO pin as defined by the fdt */ -struct fdt_gpio_state { - const char *name; /* name of the fdt property defining this */ - uint gpio; /* GPIO number, or FDT_GPIO_NONE if none */ - u8 flags; /* FDT_GPIO_... flags */ +#define MAX_PHANDLE_ARGS 16 +struct fdtdec_phandle_args { + int node; + int args_count; + uint32_t args[MAX_PHANDLE_ARGS]; }; -/* This tells us whether a fdt_gpio_state record is valid or not */ -#define fdt_gpio_isvalid(x) ((x)->gpio != FDT_GPIO_NONE) - /** - * Read the GPIO taking into account the polarity of the pin. + * fdtdec_parse_phandle_with_args() - Find a node pointed by phandle in a list * - * @param gpio pointer to the decoded gpio - * @return value of the gpio if successful, < 0 if unsuccessful - */ -int fdtdec_get_gpio(struct fdt_gpio_state *gpio); - -/** - * Write the GPIO taking into account the polarity of the pin. + * This function is useful to parse lists of phandles and their arguments. + * + * Example: + * + * phandle1: node1 { + * #list-cells = <2>; + * } + * + * phandle2: node2 { + * #list-cells = <1>; + * } + * + * node3 { + * list = <&phandle1 1 2 &phandle2 3>; + * } + * + * To get a device_node of the `node2' node you may call this: + * fdtdec_parse_phandle_with_args(blob, node3, "list", "#list-cells", 0, 1, + * &args); + * + * (This function is a modified version of __of_parse_phandle_with_args() from + * Linux 3.18) + * + * @blob: Pointer to device tree + * @src_node: Offset of device tree node containing a list + * @list_name: property name that contains a list + * @cells_name: property name that specifies the phandles' arguments count, + * or NULL to use @cells_count + * @cells_count: Cell count to use if @cells_name is NULL + * @index: index of a phandle to parse out + * @out_args: optional pointer to output arguments structure (will be filled) + * @return 0 on success (with @out_args filled out if not NULL), -ENOENT if + * @list_name does not exist, a phandle was not found, @cells_name + * could not be found, the arguments were truncated or there were too + * many arguments. * - * @param gpio pointer to the decoded gpio - * @return 0 if successful */ -int fdtdec_set_gpio(struct fdt_gpio_state *gpio, int val); +int fdtdec_parse_phandle_with_args(const void *blob, int src_node, + const char *list_name, + const char *cells_name, + int cell_count, int index, + struct fdtdec_phandle_args *out_args); /** * Find the next numbered alias for a peripheral. This is used to enumerate @@ -592,50 +606,6 @@ const u32 *fdtdec_locate_array(const void *blob, int node, int fdtdec_get_bool(const void *blob, int node, const char *prop_name); /** - * Decode a single GPIOs from an FDT. - * - * If the property is not found, then the GPIO structure will still be - * initialised, with gpio set to FDT_GPIO_NONE. This makes it easy to - * provide optional GPIOs. - * - * @param blob FDT blob to use - * @param node Node to look at - * @param prop_name Node property name - * @param gpio gpio elements to fill from FDT - * @return 0 if ok, -FDT_ERR_NOTFOUND if the property is missing. - */ -int fdtdec_decode_gpio(const void *blob, int node, const char *prop_name, - struct fdt_gpio_state *gpio); - -/** - * Decode a list of GPIOs from an FDT. This creates a list of GPIOs with no - * terminating item. - * - * @param blob FDT blob to use - * @param node Node to look at - * @param prop_name Node property name - * @param gpio Array of gpio elements to fill from FDT. This will be - * untouched if either 0 or an error is returned - * @param max_count Maximum number of elements allowed - * @return number of GPIOs read if ok, -FDT_ERR_BADLAYOUT if max_count would - * be exceeded, or -FDT_ERR_NOTFOUND if the property is missing. - */ -int fdtdec_decode_gpios(const void *blob, int node, const char *prop_name, - struct fdt_gpio_state *gpio, int max_count); - -/** - * Set up a GPIO pin according to the provided gpio information. At present this - * just requests the GPIO. - * - * If the gpio is FDT_GPIO_NONE, no action is taken. This makes it easy to - * deal with optional GPIOs. - * - * @param gpio GPIO info to use for set up - * @return 0 if all ok or gpio was FDT_GPIO_NONE; -1 on error - */ -int fdtdec_setup_gpio(struct fdt_gpio_state *gpio); - -/** * Look in the FDT for a config item with the given name and return its value * as a 32-bit integer. The property must have at least 4 bytes of data. The * value of the first cell is returned. diff --git a/include/fs.h b/include/fs.h index ffb6ce7..fd1e4ab 100644 --- a/include/fs.h +++ b/include/fs.h @@ -109,4 +109,10 @@ int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], int fstype); +/* + * Determine the type of the specified filesystem and print it. Optionally it is + * possible to store the type directly in env. + */ +int do_fs_type(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); + #endif /* _FS_H */ diff --git a/include/hash.h b/include/hash.h index d8ec4f0..f4eb100 100644 --- a/include/hash.h +++ b/include/hash.h @@ -17,7 +17,6 @@ enum { HASH_FLAG_ENV = 1 << 1, /* Allow env vars */ }; -#ifndef USE_HOSTCC #if defined(CONFIG_SHA1SUM_VERIFY) || defined(CONFIG_CRC32_VERIFY) #define CONFIG_HASH_VERIFY #endif @@ -77,6 +76,7 @@ struct hash_algo { int size); }; +#ifndef USE_HOSTCC /** * hash_command: Process a hash command for a particular algorithm * @@ -115,6 +115,23 @@ int hash_block(const char *algo_name, const void *data, unsigned int len, uint8_t *output, int *output_size); /** + * hash_show() - Print out a hash algorithm and value + * + * You will get a message like this (without a newline at the end): + * + * "sha1 for 9eb3337c ... 9eb3338f ==> 7942ef1df479fd3130f716eb9613d107dab7e257" + * + * @algo: Algorithm used for hash + * @addr: Address of data that was hashed + * @len: Length of data that was hashed + * @output: Hash value to display + */ +void hash_show(struct hash_algo *algo, ulong addr, ulong len, + uint8_t *output); + +#endif /* !USE_HOSTCC */ + +/** * hash_lookup_algo() - Look up the hash_algo struct for an algorithm * * The function returns the pointer to the struct or -EPROTONOSUPPORT if the @@ -128,18 +145,17 @@ int hash_block(const char *algo_name, const void *data, unsigned int len, int hash_lookup_algo(const char *algo_name, struct hash_algo **algop); /** - * hash_show() - Print out a hash algorithm and value + * hash_progressive_lookup_algo() - Look up hash_algo for prog. hash support * - * You will get a message like this (without a newline at the end): + * The function returns the pointer to the struct or -EPROTONOSUPPORT if the + * algorithm is not available with progressive hash support. * - * "sha1 for 9eb3337c ... 9eb3338f ==> 7942ef1df479fd3130f716eb9613d107dab7e257" + * @algo_name: Hash algorithm to look up + * @algop: Pointer to the hash_algo struct if found * - * @algo: Algorithm used for hash - * @addr: Address of data that was hashed - * @len: Length of data that was hashed - * @output: Hash value to display + * @return 0 if ok, -EPROTONOSUPPORT for an unknown algorithm. */ -void hash_show(struct hash_algo *algo, ulong addr, ulong len, - uint8_t *output); -#endif /* !USE_HOSTCC */ +int hash_progressive_lookup_algo(const char *algo_name, + struct hash_algo **algop); + #endif diff --git a/include/i2c.h b/include/i2c.h index 9c6a60c..31b0389 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -25,22 +25,21 @@ * enough as to be incompatible for compilation purposes. */ -#ifdef CONFIG_DM_I2C - enum dm_i2c_chip_flags { DM_I2C_CHIP_10BIT = 1 << 0, /* Use 10-bit addressing */ DM_I2C_CHIP_RD_ADDRESS = 1 << 1, /* Send address for each read byte */ DM_I2C_CHIP_WR_ADDRESS = 1 << 2, /* Send address for each write byte */ }; +struct udevice; /** * struct dm_i2c_chip - information about an i2c chip * * An I2C chip is a device on the I2C bus. It sits at a particular address * and normally supports 7-bit or 10-bit addressing. * - * To obtain this structure, use dev_get_parentdata(dev) where dev is the - * chip to examine. + * To obtain this structure, use dev_get_parent_platdata(dev) where dev is + * the chip to examine. * * @chip_addr: Chip address on bus * @offset_len: Length of offset in bytes. A single byte offset can @@ -75,7 +74,7 @@ struct dm_i2c_bus { }; /** - * i2c_read() - read bytes from an I2C chip + * dm_i2c_read() - read bytes from an I2C chip * * To obtain an I2C device (called a 'chip') given the I2C bus address you * can use i2c_get_chip(). To obtain a bus by bus number use @@ -91,13 +90,12 @@ struct dm_i2c_bus { * * @return 0 on success, -ve on failure */ -int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, - int len); +int dm_i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len); /** - * i2c_write() - write bytes to an I2C chip + * dm_i2c_write() - write bytes to an I2C chip * - * See notes for i2c_read() above. + * See notes for dm_i2c_read() above. * * @dev: Chip to write to * @offset: Offset within chip to start writing @@ -106,11 +104,11 @@ int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, * * @return 0 on success, -ve on failure */ -int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, - int len); +int dm_i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, + int len); /** - * i2c_probe() - probe a particular chip address + * dm_i2c_probe() - probe a particular chip address * * This can be useful to check for the existence of a chip on the bus. * It is typically implemented by writing the chip address to the bus @@ -122,25 +120,25 @@ int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, * @devp: Returns the device found, or NULL if none * @return 0 if a chip was found at that address, -ve if not */ -int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, - struct udevice **devp); +int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, + struct udevice **devp); /** - * i2c_set_bus_speed() - set the speed of a bus + * dm_i2c_set_bus_speed() - set the speed of a bus * * @bus: Bus to adjust * @speed: Requested speed in Hz * @return 0 if OK, -EINVAL for invalid values */ -int i2c_set_bus_speed(struct udevice *bus, unsigned int speed); +int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed); /** - * i2c_get_bus_speed() - get the speed of a bus + * dm_i2c_get_bus_speed() - get the speed of a bus * * @bus: Bus to check * @return speed of selected I2C bus in Hz, -ve on error */ -int i2c_get_bus_speed(struct udevice *bus); +int dm_i2c_get_bus_speed(struct udevice *bus); /** * i2c_set_chip_flags() - set flags for a chip @@ -185,6 +183,80 @@ int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len); */ int i2c_deblock(struct udevice *bus); +#ifdef CONFIG_DM_I2C_COMPAT +/** + * i2c_probe() - Compatibility function for driver model + * + * Calls dm_i2c_probe() on the current bus + */ +int i2c_probe(uint8_t chip_addr); + +/** + * i2c_read() - Compatibility function for driver model + * + * Calls dm_i2c_read() with the device corresponding to @chip_addr, and offset + * set to @addr. @alen must match the current setting for the device. + */ +int i2c_read(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer, + int len); + +/** + * i2c_write() - Compatibility function for driver model + * + * Calls dm_i2c_write() with the device corresponding to @chip_addr, and offset + * set to @addr. @alen must match the current setting for the device. + */ +int i2c_write(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer, + int len); + +/** + * i2c_get_bus_num_fdt() - Compatibility function for driver model + * + * @return the bus number associated with the given device tree node + */ +int i2c_get_bus_num_fdt(int node); + +/** + * i2c_get_bus_num() - Compatibility function for driver model + * + * @return the 'current' bus number + */ +unsigned int i2c_get_bus_num(void); + +/** + * i2c_set_bus_num() - Compatibility function for driver model + * + * Sets the 'current' bus + */ +int i2c_set_bus_num(unsigned int bus); + +static inline void I2C_SET_BUS(unsigned int bus) +{ + i2c_set_bus_num(bus); +} + +static inline unsigned int I2C_GET_BUS(void) +{ + return i2c_get_bus_num(); +} + +/** + * i2c_init() - Compatibility function for driver model + * + * This function does nothing. + */ +void i2c_init(int speed, int slaveaddr); + +/** + * board_i2c_init() - Compatibility function for driver model + * + * @param blob Device tree blbo + * @return the number of I2C bus + */ +void board_i2c_init(const void *blob); + +#endif + /* * Not all of these flags are implemented in the U-Boot API */ @@ -330,10 +402,12 @@ struct dm_i2c_ops { * * @bus: Bus to examine * @chip_addr: Chip address for the new device + * @offset_len: Length of a register offset in bytes (normally 1) * @devp: Returns pointer to new device if found or -ENODEV if not * found */ -int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp); +int i2c_get_chip(struct udevice *bus, uint chip_addr, uint offset_len, + struct udevice **devp); /** * i2c_get_chip() - get a device to use to access a chip on a bus number @@ -343,10 +417,12 @@ int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp); * * @busnum: Bus number to examine * @chip_addr: Chip address for the new device + * @offset_len: Length of a register offset in bytes (normally 1) * @devp: Returns pointer to new device if found or -ENODEV if not * found */ -int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp); +int i2c_get_chip_for_busnum(int busnum, int chip_addr, uint offset_len, + struct udevice **devp); /** * i2c_chip_ofdata_to_platdata() - Decode standard I2C platform data @@ -362,8 +438,6 @@ int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp); int i2c_chip_ofdata_to_platdata(const void *blob, int node, struct dm_i2c_chip *chip); -#endif - #ifndef CONFIG_DM_I2C /* diff --git a/include/image.h b/include/image.h index ee3afe3..0e6af00 100644 --- a/include/image.h +++ b/include/image.h @@ -751,6 +751,7 @@ int fit_parse_conf(const char *spec, ulong addr_curr, int fit_parse_subimage(const char *spec, ulong addr_curr, ulong *addr, const char **image_name); +int fit_get_subimage_count(const void *fit, int images_noffset); void fit_print_contents(const void *fit); void fit_image_print(const void *fit, int noffset, const char *p); @@ -927,8 +928,9 @@ struct checksum_algo { #if IMAGE_ENABLE_SIGN const EVP_MD *(*calculate_sign)(void); #endif - void (*calculate)(const struct image_region region[], - int region_count, uint8_t *checksum); + int (*calculate)(const char *name, + const struct image_region region[], + int region_count, uint8_t *checksum); const uint8_t *rsa_padding; }; diff --git a/include/lcd.h b/include/lcd.h index 160f940..f049fd3 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -13,21 +13,19 @@ #ifndef _LCD_H_ #define _LCD_H_ #include <lcd_console.h> +#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN) +#include <bmp_layout.h> +#include <asm/byteorder.h> +#endif extern char lcd_is_enabled; - extern int lcd_line_length; - extern struct vidinfo panel_info; void lcd_ctrl_init(void *lcdbase); void lcd_enable(void); - -/* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */ void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue); -void lcd_initcolregs(void); -/* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, void **alloc_addr); int bmp_display(ulong addr, int x, int y); @@ -41,227 +39,38 @@ int bmp_display(ulong addr, int x, int y); void lcd_set_flush_dcache(int flush); #if defined CONFIG_MPC823 -/* - * LCD controller stucture for MPC823 CPU - */ -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */ - u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ - u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ - u_char vl_clor; /* Color, 0 = mono, 1 = color */ - u_char vl_tft; /* 0 = passive, 1 = TFT */ - - /* Horizontal control register. Timing from data sheet */ - ushort vl_wbl; /* Wait between lines */ - - /* Vertical control register */ - u_char vl_vpw; /* Vertical sync pulse width */ - u_char vl_lcdac; /* LCD AC timing */ - u_char vl_wbf; /* Wait between frames */ -} vidinfo_t; - +#include <mpc823_lcd.h> #elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \ defined CONFIG_CPU_MONAHANS -/* - * PXA LCD DMA descriptor - */ -struct pxafb_dma_descriptor { - u_long fdadr; /* Frame descriptor address register */ - u_long fsadr; /* Frame source address register */ - u_long fidr; /* Frame ID register */ - u_long ldcmd; /* Command register */ -}; - -/* - * PXA LCD info - */ -struct pxafb_info { - - /* Misc registers */ - u_long reg_lccr3; - u_long reg_lccr2; - u_long reg_lccr1; - u_long reg_lccr0; - u_long fdadr0; - u_long fdadr1; - - /* DMA descriptors */ - struct pxafb_dma_descriptor * dmadesc_fblow; - struct pxafb_dma_descriptor * dmadesc_fbhigh; - struct pxafb_dma_descriptor * dmadesc_palette; - - u_long screen; /* physical address of frame buffer */ - u_long palette; /* physical address of palette memory */ - u_int palette_size; -}; - -/* - * LCD controller stucture for PXA CPU - */ -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ - u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ - u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ - u_char vl_clor; /* Color, 0 = mono, 1 = color */ - u_char vl_tft; /* 0 = passive, 1 = TFT */ - - /* Horizontal control register. Timing from data sheet */ - ushort vl_hpw; /* Horz sync pulse width */ - u_char vl_blw; /* Wait before of line */ - u_char vl_elw; /* Wait end of line */ - - /* Vertical control register. */ - u_char vl_vpw; /* Vertical sync pulse width */ - u_char vl_bfw; /* Wait before of frame */ - u_char vl_efw; /* Wait end of frame */ - - /* PXA LCD controller params */ - struct pxafb_info pxa; -} vidinfo_t; - +#include <pxa_lcd.h> #elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD) - -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - u_long vl_clk; /* pixel clock in ps */ - - /* LCD configuration register */ - u_long vl_sync; /* Horizontal / vertical sync */ - u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ - u_long vl_tft; /* 0 = passive, 1 = TFT */ - u_long vl_cont_pol_low; /* contrast polarity is low */ - u_long vl_clk_pol; /* clock polarity */ - - /* Horizontal control register. */ - u_long vl_hsync_len; /* Length of horizontal sync */ - u_long vl_left_margin; /* Time from sync to picture */ - u_long vl_right_margin; /* Time from picture to sync */ - - /* Vertical control register. */ - u_long vl_vsync_len; /* Length of vertical sync */ - u_long vl_upper_margin; /* Time from sync to picture */ - u_long vl_lower_margin; /* Time from picture to sync */ - - u_long mmio; /* Memory mapped registers */ -} vidinfo_t; - +#include <atmel_lcd.h> #elif defined(CONFIG_EXYNOS_FB) - -enum { - FIMD_RGB_INTERFACE = 1, - FIMD_CPU_INTERFACE = 2, -}; - -enum exynos_fb_rgb_mode_t { - MODE_RGB_P = 0, - MODE_BGR_P = 1, - MODE_RGB_S = 2, - MODE_BGR_S = 3, -}; - -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register */ - u_char vl_freq; /* Frequency */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel */ - - /* Horizontal control register. Timing from data sheet */ - u_char vl_hspw; /* Horz sync pulse width */ - u_char vl_hfpd; /* Wait before of line */ - u_char vl_hbpd; /* Wait end of line */ - - /* Vertical control register. */ - u_char vl_vspw; /* Vertical sync pulse width */ - u_char vl_vfpd; /* Wait before of frame */ - u_char vl_vbpd; /* Wait end of frame */ - u_char vl_cmd_allow_len; /* Wait end of frame */ - - unsigned int win_id; - unsigned int init_delay; - unsigned int power_on_delay; - unsigned int reset_delay; - unsigned int interface_mode; - unsigned int mipi_enabled; - unsigned int dp_enabled; - unsigned int cs_setup; - unsigned int wr_setup; - unsigned int wr_act; - unsigned int wr_hold; - unsigned int logo_on; - unsigned int logo_width; - unsigned int logo_height; - int logo_x_offset; - int logo_y_offset; - unsigned long logo_addr; - unsigned int rgb_mode; - unsigned int resolution; - - /* parent clock name(MPLL, EPLL or VPLL) */ - unsigned int pclk_name; - /* ratio value for source clock from parent clock. */ - unsigned int sclk_div; - - unsigned int dual_lcd_enabled; -} vidinfo_t; - -void init_panel_info(vidinfo_t *vid); - +#include <exynos_lcd.h> #else - typedef struct vidinfo { ushort vl_col; /* Number of columns (i.e. 160) */ ushort vl_row; /* Number of rows (i.e. 100) */ - u_char vl_bpix; /* Bits per pixel, 0 = 1 */ - ushort *cmap; /* Pointer to the colormap */ - void *priv; /* Pointer to driver-specific data */ } vidinfo_t; -#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_ATMEL_LCD */ +static __maybe_unused ushort *configuration_get_cmap(void) +{ + return panel_info.cmap; +} +#endif -extern vidinfo_t panel_info; +ushort *configuration_get_cmap(void); -/* Video functions */ +extern vidinfo_t panel_info; -void lcd_putc(const char c); -void lcd_puts(const char *s); -void lcd_printf(const char *fmt, ...); -void lcd_clear(void); -int lcd_display_bitmap(ulong bmp_image, int x, int y); +void lcd_putc(const char c); +void lcd_puts(const char *s); +void lcd_printf(const char *fmt, ...); +void lcd_clear(void); +int lcd_display_bitmap(ulong bmp_image, int x, int y); /** * Get the width of the LCD in pixels @@ -319,20 +128,9 @@ void lcd_show_board_info(void); /* Return the size of the LCD frame buffer, and the line length */ int lcd_get_size(int *line_length); -int lcd_dt_simplefb_add_node(void *blob); -int lcd_dt_simplefb_enable_existing_node(void *blob); - /* Update the LCD / flush the cache */ void lcd_sync(void); -/************************************************************************/ -/* ** BITMAP DISPLAY SUPPORT */ -/************************************************************************/ -#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN) -# include <bmp_layout.h> -# include <asm/byteorder.h> -#endif - /* * Information about displays we are using. This is for configuring * the LCD controller and memory allocation. Someone has to know what @@ -347,38 +145,32 @@ void lcd_sync(void); #define LCD_COLOR8 3 #define LCD_COLOR16 4 #define LCD_COLOR32 5 -/*----------------------------------------------------------------------*/ + #if defined(CONFIG_LCD_INFO_BELOW_LOGO) -# define LCD_INFO_X 0 -# define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT) +#define LCD_INFO_X 0 +#define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT) #elif defined(CONFIG_LCD_LOGO) -# define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH) -# define LCD_INFO_Y VIDEO_FONT_HEIGHT +#define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH) +#define LCD_INFO_Y VIDEO_FONT_HEIGHT #else -# define LCD_INFO_X VIDEO_FONT_WIDTH -# define LCD_INFO_Y VIDEO_FONT_HEIGHT +#define LCD_INFO_X VIDEO_FONT_WIDTH +#define LCD_INFO_Y VIDEO_FONT_HEIGHT #endif /* Default to 8bpp if bit depth not specified */ #ifndef LCD_BPP -# define LCD_BPP LCD_COLOR8 +#define LCD_BPP LCD_COLOR8 #endif + #ifndef LCD_DF -# define LCD_DF 1 +#define LCD_DF 1 #endif /* Calculate nr. of bits per pixel and nr. of colors */ #define NBITS(bit_code) (1 << (bit_code)) #define NCOLORS(bit_code) (1 << NBITS(bit_code)) -/************************************************************************/ -/* ** CONSOLE CONSTANTS */ -/************************************************************************/ #if LCD_BPP == LCD_COLOR8 - -/* - * 8bpp color definitions - */ # define CONSOLE_COLOR_BLACK 0 # define CONSOLE_COLOR_RED 1 # define CONSOLE_COLOR_GREEN 2 @@ -387,38 +179,25 @@ void lcd_sync(void); # define CONSOLE_COLOR_MAGENTA 5 # define CONSOLE_COLOR_CYAN 6 # define CONSOLE_COLOR_GREY 14 -# define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */ - +# define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */ #elif LCD_BPP == LCD_COLOR32 -/* - * 32bpp color definitions - */ -# define CONSOLE_COLOR_RED 0x00ff0000 -# define CONSOLE_COLOR_GREEN 0x0000ff00 -# define CONSOLE_COLOR_YELLOW 0x00ffff00 -# define CONSOLE_COLOR_BLUE 0x000000ff -# define CONSOLE_COLOR_MAGENTA 0x00ff00ff -# define CONSOLE_COLOR_CYAN 0x0000ffff -# define CONSOLE_COLOR_GREY 0x00aaaaaa -# define CONSOLE_COLOR_BLACK 0x00000000 -# define CONSOLE_COLOR_WHITE 0x00ffffff /* Must remain last / highest*/ -# define NBYTES(bit_code) (NBITS(bit_code) >> 3) - -#else - -/* - * 16bpp color definitions - */ -# define CONSOLE_COLOR_BLACK 0x0000 -# define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */ - +#define CONSOLE_COLOR_RED 0x00ff0000 +#define CONSOLE_COLOR_GREEN 0x0000ff00 +#define CONSOLE_COLOR_YELLOW 0x00ffff00 +#define CONSOLE_COLOR_BLUE 0x000000ff +#define CONSOLE_COLOR_MAGENTA 0x00ff00ff +#define CONSOLE_COLOR_CYAN 0x0000ffff +#define CONSOLE_COLOR_GREY 0x00aaaaaa +#define CONSOLE_COLOR_BLACK 0x00000000 +#define CONSOLE_COLOR_WHITE 0x00ffffff /* Must remain last / highest */ +#define NBYTES(bit_code) (NBITS(bit_code) >> 3) +#else /* 16bpp color definitions */ +#define CONSOLE_COLOR_BLACK 0x0000 +#define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */ #endif /* color definitions */ -/************************************************************************/ #ifndef PAGE_SIZE -# define PAGE_SIZE 4096 +#define PAGE_SIZE 4096 #endif -/************************************************************************/ - #endif /* _LCD_H_ */ diff --git a/include/linker_lists.h b/include/linker_lists.h index d37fba4..940c871 100644 --- a/include/linker_lists.h +++ b/include/linker_lists.h @@ -23,7 +23,7 @@ /** * A linker list is constructed by grouping together linker input - * sections, each containning one entry of the list. Each input section + * sections, each containing one entry of the list. Each input section * contains a constant initialized variable which holds the entry's * content. Linker list input sections are constructed from the list * and entry names, plus a prefix which allows grouping all lists @@ -39,7 +39,7 @@ * This ensures uniqueness for both input section and C variable name. * * Note that the names differ only in the first character, "." for the - * setion and "_" for the variable, so that the linker cannot confuse + * section and "_" for the variable, so that the linker cannot confuse * section and symbol names. From now on, both names will be referred * to as * diff --git a/include/linux/compat.h b/include/linux/compat.h index b40133c..6eac17f 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -262,7 +262,6 @@ typedef struct { /* from include/linux/types.h */ -typedef int atomic_t; /** * struct callback_head - callback structure for use with RCU and task_work * @next: next update requests in a list diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h new file mode 100644 index 0000000..c8c5659 --- /dev/null +++ b/include/linux/compiler-gcc5.h @@ -0,0 +1,65 @@ +#ifndef __LINUX_COMPILER_H +#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead." +#endif + +#define __used __attribute__((__used__)) +#define __must_check __attribute__((warn_unused_result)) +#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) + +/* Mark functions as cold. gcc will assume any path leading to a call + to them will be unlikely. This means a lot of manual unlikely()s + are unnecessary now for any paths leading to the usual suspects + like BUG(), printk(), panic() etc. [but let's keep them for now for + older compilers] + + Early snapshots of gcc 4.3 don't support this and we can't detect this + in the preprocessor, but we can live with this because they're unreleased. + Maketime probing would be overkill here. + + gcc also has a __attribute__((__hot__)) to move hot functions into + a special section, but I don't see any sense in this right now in + the kernel context */ +#define __cold __attribute__((__cold__)) + +#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) + +#ifndef __CHECKER__ +# define __compiletime_warning(message) __attribute__((warning(message))) +# define __compiletime_error(message) __attribute__((error(message))) +#endif /* __CHECKER__ */ + +/* + * Mark a position in code as unreachable. This can be used to + * suppress control flow warnings after asm blocks that transfer + * control elsewhere. + * + * Early snapshots of gcc 4.5 don't support this and we can't detect + * this in the preprocessor, but we can live with this because they're + * unreleased. Really, we need to have autoconf for the kernel. + */ +#define unreachable() __builtin_unreachable() + +/* Mark a function definition as prohibited from being cloned. */ +#define __noclone __attribute__((__noclone__)) + +/* + * Tell the optimizer that something else uses this function or variable. + */ +#define __visible __attribute__((externally_visible)) + +/* + * GCC 'asm goto' miscompiles certain code sequences: + * + * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 + * + * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. + * + * (asm goto is automatically volatile - the naming reflects this.) + */ +#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) + +#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP +#define __HAVE_BUILTIN_BSWAP32__ +#define __HAVE_BUILTIN_BSWAP64__ +#define __HAVE_BUILTIN_BSWAP16__ +#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ diff --git a/include/mmc.h b/include/mmc.h index 09101e2..7d6feca 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -14,24 +14,41 @@ #include <linux/compiler.h> #include <part.h> -#define SD_VERSION_SD 0x20000 -#define SD_VERSION_3 (SD_VERSION_SD | 0x300) -#define SD_VERSION_2 (SD_VERSION_SD | 0x200) -#define SD_VERSION_1_0 (SD_VERSION_SD | 0x100) -#define SD_VERSION_1_10 (SD_VERSION_SD | 0x10a) -#define MMC_VERSION_MMC 0x10000 -#define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC) -#define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x102) -#define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x104) -#define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x202) -#define MMC_VERSION_3 (MMC_VERSION_MMC | 0x300) -#define MMC_VERSION_4 (MMC_VERSION_MMC | 0x400) -#define MMC_VERSION_4_1 (MMC_VERSION_MMC | 0x401) -#define MMC_VERSION_4_2 (MMC_VERSION_MMC | 0x402) -#define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x403) -#define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429) -#define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405) -#define MMC_VERSION_5_0 (MMC_VERSION_MMC | 0x500) +/* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */ +#define SD_VERSION_SD (1U << 31) +#define MMC_VERSION_MMC (1U << 30) + +#define MAKE_SDMMC_VERSION(a, b, c) \ + ((((u32)(a)) << 16) | ((u32)(b) << 8) | (u32)(c)) +#define MAKE_SD_VERSION(a, b, c) \ + (SD_VERSION_SD | MAKE_SDMMC_VERSION(a, b, c)) +#define MAKE_MMC_VERSION(a, b, c) \ + (MMC_VERSION_MMC | MAKE_SDMMC_VERSION(a, b, c)) + +#define EXTRACT_SDMMC_MAJOR_VERSION(x) \ + (((u32)(x) >> 16) & 0xff) +#define EXTRACT_SDMMC_MINOR_VERSION(x) \ + (((u32)(x) >> 8) & 0xff) +#define EXTRACT_SDMMC_CHANGE_VERSION(x) \ + ((u32)(x) & 0xff) + +#define SD_VERSION_3 MAKE_SD_VERSION(3, 0, 0) +#define SD_VERSION_2 MAKE_SD_VERSION(2, 0, 0) +#define SD_VERSION_1_0 MAKE_SD_VERSION(1, 0, 0) +#define SD_VERSION_1_10 MAKE_SD_VERSION(1, 10, 0) + +#define MMC_VERSION_UNKNOWN MAKE_MMC_VERSION(0, 0, 0) +#define MMC_VERSION_1_2 MAKE_MMC_VERSION(1, 2, 0) +#define MMC_VERSION_1_4 MAKE_MMC_VERSION(1, 4, 0) +#define MMC_VERSION_2_2 MAKE_MMC_VERSION(2, 2, 0) +#define MMC_VERSION_3 MAKE_MMC_VERSION(3, 0, 0) +#define MMC_VERSION_4 MAKE_MMC_VERSION(4, 0, 0) +#define MMC_VERSION_4_1 MAKE_MMC_VERSION(4, 1, 0) +#define MMC_VERSION_4_2 MAKE_MMC_VERSION(4, 2, 0) +#define MMC_VERSION_4_3 MAKE_MMC_VERSION(4, 3, 0) +#define MMC_VERSION_4_41 MAKE_MMC_VERSION(4, 4, 1) +#define MMC_VERSION_4_5 MAKE_MMC_VERSION(4, 5, 0) +#define MMC_VERSION_5_0 MAKE_MMC_VERSION(5, 0, 0) #define MMC_MODE_HS (1 << 0) #define MMC_MODE_HS_52MHz (1 << 1) @@ -43,7 +60,8 @@ #define SD_DATA_4BIT 0x00040000 -#define IS_SD(x) (x->version & SD_VERSION_SD) +#define IS_SD(x) ((x)->version & SD_VERSION_SD) +#define IS_MMC(x) ((x)->version & SD_VERSION_MMC) #define MMC_DATA_READ 1 #define MMC_DATA_WRITE 2 @@ -438,6 +456,20 @@ int board_mmc_init(bd_t *bis); int cpu_mmc_init(bd_t *bis); int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr); +struct pci_device_id; + +/** + * pci_mmc_init() - set up PCI MMC devices + * + * This finds all the matching PCI IDs and sets them up as MMC devices. + * + * @name: Name to use for devices + * @mmc_supported: PCI IDs to search for + * @num_ids: Number of elements in @mmc_supported + */ +int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported, + int num_ids); + /* Set block count limit because of 16 bit register limit on some hardware*/ #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 diff --git a/include/mpc823_lcd.h b/include/mpc823_lcd.h new file mode 100644 index 0000000..7e210e3 --- /dev/null +++ b/include/mpc823_lcd.h @@ -0,0 +1,43 @@ +/* + * mpc823_lcd.h - MPC823 LCD Controller structures + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MPC823_LCD_H_ +#define _MPC823_LCD_H_ + +/* + * LCD controller stucture for MPC823 CPU + */ +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 640) */ + ushort vl_row; /* Number of rows (i.e. 480) */ + ushort vl_width; /* Width of display area in millimeters */ + ushort vl_height; /* Height of display area in millimeters */ + + /* LCD configuration register */ + u_char vl_clkp; /* Clock polarity */ + u_char vl_oep; /* Output Enable polarity */ + u_char vl_hsp; /* Horizontal Sync polarity */ + u_char vl_vsp; /* Vertical Sync polarity */ + u_char vl_dp; /* Data polarity */ + u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */ + u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ + u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ + u_char vl_clor; /* Color, 0 = mono, 1 = color */ + u_char vl_tft; /* 0 = passive, 1 = TFT */ + + /* Horizontal control register. Timing from data sheet */ + ushort vl_wbl; /* Wait between lines */ + + /* Vertical control register */ + u_char vl_vpw; /* Vertical sync pulse width */ + u_char vl_lcdac; /* LCD AC timing */ + u_char vl_wbf; /* Wait between frames */ +} vidinfo_t; + +#endif diff --git a/include/net.h b/include/net.h index 73ea88b..43e3d28 100644 --- a/include/net.h +++ b/include/net.h @@ -512,10 +512,6 @@ unsigned add_ip_checksums(unsigned offset, unsigned sum, unsigned new_sum); */ int ip_checksum_ok(const void *addr, unsigned nbytes); -/* Checksum */ -extern int NetCksumOk(uchar *, int); /* Return true if cksum OK */ -extern uint NetCksum(uchar *, int); /* Calculate the checksum */ - /* Callbacks */ extern rxhand_f *net_get_udp_handler(void); /* Get UDP RX packet handler */ extern void net_set_udp_handler(rxhand_f *); /* Set UDP RX packet handler */ diff --git a/include/pci.h b/include/pci.h index 4fbb8f6..004a048 100644 --- a/include/pci.h +++ b/include/pci.h @@ -644,8 +644,7 @@ extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device, int index); extern pci_dev_t pci_find_devices (struct pci_device_id *ids, int index); -extern pci_dev_t pci_find_class(int wanted_class, int wanted_sub_code, - int wanted_prog_if, int index); +pci_dev_t pci_find_class(unsigned int find_class, int index); extern int pci_hose_config_device(struct pci_controller *hose, pci_dev_t dev, diff --git a/include/pci_ids.h b/include/pci_ids.h index 26f4748..dc2ca21 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -1346,6 +1346,7 @@ #define PCI_VENDOR_ID_REALTEK 0x10ec #define PCI_DEVICE_ID_REALTEK_8139 0x8139 +#define PCI_DEVICE_ID_REALTEK_8168 0x8168 #define PCI_VENDOR_ID_XILINX 0x10ee #define PCI_DEVICE_ID_RME_DIGI96 0x3fc0 @@ -2591,9 +2592,17 @@ #define PCI_DEVICE_ID_INTEL_MFD_EMMC0 0x0823 #define PCI_DEVICE_ID_INTEL_MFD_EMMC1 0x0824 #define PCI_DEVICE_ID_INTEL_MRST_SD2 0x084F +#define PCI_DEVICE_ID_INTEL_QRK_SDIO 0x08A7 +#define PCI_DEVICE_ID_INTEL_QRK_UART 0x0936 +#define PCI_DEVICE_ID_INTEL_QRK_EMAC 0x0937 +#define PCI_DEVICE_ID_INTEL_QRK_ILB 0x095E #define PCI_DEVICE_ID_INTEL_I960 0x0960 #define PCI_DEVICE_ID_INTEL_I960RM 0x0962 #define PCI_DEVICE_ID_INTEL_CENTERTON_ILB 0x0c60 +#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SDIO 0x0f15 +#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SDCARD 0x0f16 +#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_LPC 0x0f1c +#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA 0x0f23 #define PCI_DEVICE_ID_INTEL_82541ER 0x1078 #define PCI_DEVICE_ID_INTEL_82541GI_LF 0x107c #define PCI_DEVICE_ID_INTEL_82542 0x1000 diff --git a/include/pci_rom.h b/include/pci_rom.h index 4ba36eb..2f1665d 100644 --- a/include/pci_rom.h +++ b/include/pci_rom.h @@ -33,14 +33,25 @@ struct pci_rom_data { uint16_t reserved_2; }; +/* + * Determines which execution method is used and whether we allow falling back + * to the other if the requested method is not available. + */ +enum pci_rom_emul { + PCI_ROM_EMULATE = 0 << 0, + PCI_ROM_USE_NATIVE = 1 << 0, + PCI_ROM_ALLOW_FALLBACK = 1 << 1, +}; + /** * pci_run_vga_bios() - Run the VGA BIOS in an x86 PC * * @dev: Video device containing the BIOS * @int15_handler: Function to call to handle int 0x15 - * @emulate: true to use the x86 emulator, false to run native + * @exec_method: flags from enum pci_rom_emul */ -int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), bool emulate); +int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), + int exec_method); /** * board_map_oprom_vendev() - map several PCI IDs to the one the ROM expects diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h index 1118489..d304658 100644 --- a/include/power/pfuze100_pmic.h +++ b/include/power/pfuze100_pmic.h @@ -16,14 +16,34 @@ enum { PFUZE100_SW1ABVOL = 0x20, PFUZE100_SW1ABSTBY = 0x21, + PFUZE100_SW1ABOFF = 0x22, + PFUZE100_SW1ABMODE = 0x23, PUZE_100_SW1ABCONF = 0x24, PFUZE100_SW1CVOL = 0x2e, PFUZE100_SW1CSTBY = 0x2f, + PFUZE100_SW1COFF = 0x30, + PFUZE100_SW1CMODE = 0x31, PFUZE100_SW1CCONF = 0x32, PFUZE100_SW2VOL = 0x35, + PFUZE100_SW2STBY = 0x36, + PFUZE100_SW2OFF = 0x37, + PFUZE100_SW2MODE = 0x38, + PFUZE100_SW2CONF = 0x39, PFUZE100_SW3AVOL = 0x3c, + PFUZE100_SW3ASTBY = 0x3D, + PFUZE100_SW3AOFF = 0x3E, + PFUZE100_SW3AMODE = 0x3F, + PFUZE100_SW3ACONF = 0x40, PFUZE100_SW3BVOL = 0x43, + PFUZE100_SW3BSTBY = 0x44, + PFUZE100_SW3BOFF = 0x45, + PFUZE100_SW3BMODE = 0x46, + PFUZE100_SW3BCONF = 0x47, PFUZE100_SW4VOL = 0x4a, + PFUZE100_SW4STBY = 0x4b, + PFUZE100_SW4OFF = 0x4c, + PFUZE100_SW4MODE = 0x4d, + PFUZE100_SW4CONF = 0x4e, PFUZE100_SWBSTCON1 = 0x66, PFUZE100_VREFDDRCON = 0x6a, PFUZE100_VSNVSVOL = 0x6b, @@ -41,6 +61,8 @@ enum { * Buck Regulators */ +#define PFUZE100_SW1ABC_SETP(x) ((x - 3000) / 250) + /* SW1A/B/C Output Voltage Configuration */ #define SW1x_0_300V 0 #define SW1x_0_325V 1 @@ -177,5 +199,38 @@ enum { #define SWBST_MODE_AUTO (2 << 2) #define SWBST_MODE_APS (2 << 3) +/* + * Regulator Mode Control + * + * OFF: The regulator is switched off and the output voltage is discharged. + * PFM: In this mode, the regulator is always in PFM mode, which is useful + * at light loads for optimized efficiency. + * PWM: In this mode, the regulator is always in PWM mode operation + * regardless of load conditions. + * APS: In this mode, the regulator moves automatically between pulse + * skipping mode and PWM mode depending on load conditions. + * + * SWxMODE[3:0] + * Normal Mode | Standby Mode | value + * OFF OFF 0x0 + * PWM OFF 0x1 + * PFM OFF 0x3 + * APS OFF 0x4 + * PWM PWM 0x5 + * PWM APS 0x6 + * APS APS 0x8 + * APS PFM 0xc + * PWM PFM 0xd + */ +#define OFF_OFF 0x0 +#define PWM_OFF 0x1 +#define PFM_OFF 0x3 +#define APS_OFF 0x4 +#define PWM_PWM 0x5 +#define PWM_APS 0x6 +#define APS_APS 0x8 +#define APS_PFM 0xc +#define PWM_PFM 0xd + int power_pfuze100_init(unsigned char bus); #endif diff --git a/include/pxa_lcd.h b/include/pxa_lcd.h new file mode 100644 index 0000000..723f6ab --- /dev/null +++ b/include/pxa_lcd.h @@ -0,0 +1,80 @@ +/* + * pxa_lcd.h - PXA LCD Controller structures + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _PXA_LCD_H_ +#define _PXA_LCD_H_ + +/* + * PXA LCD DMA descriptor + */ +struct pxafb_dma_descriptor { + u_long fdadr; /* Frame descriptor address register */ + u_long fsadr; /* Frame source address register */ + u_long fidr; /* Frame ID register */ + u_long ldcmd; /* Command register */ +}; + +/* + * PXA LCD info + */ +struct pxafb_info { + /* Misc registers */ + u_long reg_lccr3; + u_long reg_lccr2; + u_long reg_lccr1; + u_long reg_lccr0; + u_long fdadr0; + u_long fdadr1; + + /* DMA descriptors */ + struct pxafb_dma_descriptor *dmadesc_fblow; + struct pxafb_dma_descriptor *dmadesc_fbhigh; + struct pxafb_dma_descriptor *dmadesc_palette; + + u_long screen; /* physical address of frame buffer */ + u_long palette; /* physical address of palette memory */ + u_int palette_size; +}; + +/* + * LCD controller stucture for PXA CPU + */ +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 640) */ + ushort vl_row; /* Number of rows (i.e. 480) */ + ushort vl_width; /* Width of display area in millimeters */ + ushort vl_height; /* Height of display area in millimeters */ + + /* LCD configuration register */ + u_char vl_clkp; /* Clock polarity */ + u_char vl_oep; /* Output Enable polarity */ + u_char vl_hsp; /* Horizontal Sync polarity */ + u_char vl_vsp; /* Vertical Sync polarity */ + u_char vl_dp; /* Data polarity */ + u_char vl_bpix;/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ + u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ + u_char vl_splt;/* Split display, 0 = single-scan, 1 = dual-scan */ + u_char vl_clor; /* Color, 0 = mono, 1 = color */ + u_char vl_tft; /* 0 = passive, 1 = TFT */ + + /* Horizontal control register. Timing from data sheet */ + ushort vl_hpw; /* Horz sync pulse width */ + u_char vl_blw; /* Wait before of line */ + u_char vl_elw; /* Wait end of line */ + + /* Vertical control register. */ + u_char vl_vpw; /* Vertical sync pulse width */ + u_char vl_bfw; /* Wait before of frame */ + u_char vl_efw; /* Wait end of frame */ + + /* PXA LCD controller params */ + struct pxafb_info pxa; +} vidinfo_t; + +#endif diff --git a/include/sdhci.h b/include/sdhci.h index aa4a0e9..23893b5 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -12,7 +12,7 @@ #include <asm/io.h> #include <mmc.h> -#include <fdtdec.h> +#include <asm/gpio.h> /* * Controller registers @@ -246,8 +246,8 @@ struct sdhci_host { int index; int bus_width; - struct fdt_gpio_state pwr_gpio; /* Power GPIO */ - struct fdt_gpio_state cd_gpio; /* Card Detect GPIO */ + struct gpio_desc pwr_gpio; /* Power GPIO */ + struct gpio_desc cd_gpio; /* Card Detect GPIO */ void (*set_control_reg)(struct sdhci_host *host); void (*set_clock)(int dev_index, unsigned int div); diff --git a/include/spi.h b/include/spi.h index ec17bd0..c58e453 100644 --- a/include/spi.h +++ b/include/spi.h @@ -56,20 +56,42 @@ #define SPI_DEFAULT_WORDLEN 8 #ifdef CONFIG_DM_SPI +/* TODO(sjg@chromium.org): Remove this and use max_hz from struct spi_slave */ struct dm_spi_bus { uint max_hz; }; +/** + * struct dm_spi_platdata - platform data for all SPI slaves + * + * This describes a SPI slave, a child device of the SPI bus. To obtain this + * struct from a spi_slave, use dev_get_parent_platdata(dev) or + * dev_get_parent_platdata(slave->dev). + * + * This data is immuatable. Each time the device is probed, @max_hz and @mode + * will be copied to struct spi_slave. + * + * @cs: Chip select number (0..n-1) + * @max_hz: Maximum bus speed that this slave can tolerate + * @mode: SPI mode to use for this device (see SPI mode flags) + */ +struct dm_spi_slave_platdata { + unsigned int cs; + uint max_hz; + uint mode; +}; + #endif /* CONFIG_DM_SPI */ /** * struct spi_slave - Representation of a SPI slave * * For driver model this is the per-child data used by the SPI bus. It can - * be accessed using dev_get_parentdata() on the slave device. Each SPI - * driver should define this child data in its U_BOOT_DRIVER() definition: - * - * .per_child_auto_alloc_size = sizeof(struct spi_slave), + * be accessed using dev_get_parentdata() on the slave device. The SPI uclass + * sets uip per_child_auto_alloc_size to sizeof(struct spi_slave), and the + * driver should not override it. Two platform data fields (max_hz and mode) + * are copied into this structure to provide an initial value. This allows + * them to be changed, since we should never change platform data in drivers. * * If not using driver model, drivers are expected to extend this with * controller-specific data. @@ -97,8 +119,8 @@ struct spi_slave { uint mode; #else unsigned int bus; -#endif unsigned int cs; +#endif u8 op_mode_rx; u8 op_mode_tx; unsigned int wordlen; @@ -545,16 +567,16 @@ int spi_chip_select(struct udevice *slave); int spi_find_chip_select(struct udevice *bus, int cs, struct udevice **devp); /** - * spi_ofdata_to_platdata() - decode standard SPI platform data + * spi_slave_ofdata_to_platdata() - decode standard SPI platform data * - * This decodes the speed and mode from a device tree node and puts it into - * the spi_slave structure. + * This decodes the speed and mode for a slave from a device tree node * * @blob: Device tree blob * @node: Node offset to read from - * @spi: Place to put the decoded information + * @plat: Place to put the decoded information */ -int spi_ofdata_to_platdata(const void *blob, int node, struct spi_slave *spi); +int spi_slave_ofdata_to_platdata(const void *blob, int node, + struct dm_spi_slave_platdata *plat); /** * spi_cs_info() - Check information on a chip select diff --git a/include/splash.h b/include/splash.h index 89ee7b2..7ae7a68 100644 --- a/include/splash.h +++ b/include/splash.h @@ -22,7 +22,20 @@ #ifndef _SPLASH_H_ #define _SPLASH_H_ +#include <errno.h> +enum splash_storage { + SPLASH_STORAGE_NAND, + SPLASH_STORAGE_SF, +}; + +struct splash_location { + char *name; + enum splash_storage storage; + u32 offset; /* offset from start of storage */ +}; + +int splash_source_load(struct splash_location *locations, uint size); int splash_screen_prepare(void); #ifdef CONFIG_SPLASH_SCREEN_ALIGN @@ -31,6 +44,15 @@ void splash_get_pos(int *x, int *y); static inline void splash_get_pos(int *x, int *y) { } #endif +#if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_LCD) +int lcd_splash(ulong addr); +#else +static inline int lcd_splash(ulong addr) +{ + return -ENOSYS; +} +#endif + #define BMP_ALIGN_CENTER 0x7FFF #endif diff --git a/include/u-boot/rsa-checksum.h b/include/u-boot/rsa-checksum.h index c996fb3..3c69d85 100644 --- a/include/u-boot/rsa-checksum.h +++ b/include/u-boot/rsa-checksum.h @@ -16,9 +16,18 @@ extern const uint8_t padding_sha256_rsa4096[]; extern const uint8_t padding_sha256_rsa2048[]; extern const uint8_t padding_sha1_rsa2048[]; -void sha256_calculate(const struct image_region region[], int region_count, - uint8_t *checksum); -void sha1_calculate(const struct image_region region[], int region_count, - uint8_t *checksum); +/** + * hash_calculate() - Calculate hash over the data + * + * @name: Name of algorithm to be used for hash calculation + * @region: Array having info of regions over which hash needs to be calculated + * @region_count: Number of regions in the region array + * @checksum: Buffer contanining the output hash + * + * @return 0 if OK, < 0 if error + */ +int hash_calculate(const char *name, + const struct image_region region[], int region_count, + uint8_t *checksum); #endif diff --git a/include/u-boot/rsa-mod-exp.h b/include/u-boot/rsa-mod-exp.h new file mode 100644 index 0000000..fce445a --- /dev/null +++ b/include/u-boot/rsa-mod-exp.h @@ -0,0 +1,75 @@ +/* + * Copyright (c) 2014, Ruchika Gupta. + * + * SPDX-License-Identifier: GPL-2.0+ +*/ + +#ifndef _RSA_MOD_EXP_H +#define _RSA_MOD_EXP_H + +#include <errno.h> +#include <image.h> + +/** + * struct key_prop - holder for a public key properties + * + * The struct has pointers to modulus (Typically called N), + * The inverse, R^2, exponent. These can be typecasted and + * used as byte arrays or converted to the required format + * as per requirement of RSA implementation. + */ +struct key_prop { + const void *rr; /* R^2 can be treated as byte array */ + const void *modulus; /* modulus as byte array */ + const void *public_exponent; /* public exponent as byte array */ + uint32_t n0inv; /* -1 / modulus[0] mod 2^32 */ + int num_bits; /* Key length in bits */ + uint32_t exp_len; /* Exponent length in number of uint8_t */ +}; + +/** + * rsa_mod_exp_sw() - Perform RSA Modular Exponentiation in sw + * + * Operation: out[] = sig ^ exponent % modulus + * + * @sig: RSA PKCS1.5 signature + * @sig_len: Length of signature in number of bytes + * @node: Node with RSA key elements like modulus, exponent, R^2, n0inv + * @out: Result in form of byte array of len equal to sig_len + */ +int rsa_mod_exp_sw(const uint8_t *sig, uint32_t sig_len, + struct key_prop *node, uint8_t *out); + +int rsa_mod_exp(struct udevice *dev, const uint8_t *sig, uint32_t sig_len, + struct key_prop *node, uint8_t *out); + +/** + * struct struct mod_exp_ops - Driver model for RSA Modular Exponentiation + * operations + * + * The uclass interface is implemented by all crypto devices which use + * driver model. + */ +struct mod_exp_ops { + /** + * Perform Modular Exponentiation + * + * Operation: out[] = sig ^ exponent % modulus + * + * @dev: RSA Device + * @sig: RSA PKCS1.5 signature + * @sig_len: Length of signature in number of bytes + * @node: Node with RSA key elements like modulus, exponent, + * R^2, n0inv + * @out: Result in form of byte array of len equal to sig_len + * + * This function computes exponentiation over the signature. + * Returns: 0 if exponentiation is successful, or a negative value + * if it wasn't. + */ + int (*mod_exp)(struct udevice *dev, const uint8_t *sig, + uint32_t sig_len, struct key_prop *node, + uint8_t *outp); +}; + +#endif |