diff options
Diffstat (limited to 'include')
28 files changed, 69 insertions, 560 deletions
diff --git a/include/common.h b/include/common.h index 94c354b..46f07fe 100644 --- a/include/common.h +++ b/include/common.h @@ -445,11 +445,6 @@ extern ssize_t spi_read (uchar *, int, uchar *, int); extern ssize_t spi_write (uchar *, int, uchar *, int); #endif -#ifdef CONFIG_HERMES -/* $(BOARD)/hermes.c */ -void hermes_start_lxt980 (int speed); -#endif - #ifdef CONFIG_EVB64260 void evb64260_init(void); void debug_led(int, int); diff --git a/include/commproc.h b/include/commproc.h index d78ab00..6875c4c 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -535,34 +535,6 @@ typedef struct scc_enet { #define SICR_ENET_CLKRT ((uint)0x00002600) #endif /* CONFIG_FPS850L, CONFIG_FPS860L */ -/*** HERMES-PRO ******************************************************/ - -/* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */ - -#ifdef CONFIG_HERMES - -#define FEC_ENET /* use FEC for EThernet */ -#undef SCC_ENET - - -#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ -#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ -#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ -#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ -#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ -#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ -#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ -#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ -#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ -#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ -#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ -#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ -#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ - -#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ - -#endif /* CONFIG_HERMES */ - /*** IP860 **********************************************************/ #if defined(CONFIG_IP860) diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index 120fdc6..d23d2c4 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -418,8 +418,6 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NOR_SUPPORT #define CONFIG_SPL_TEXT_BASE 0xfc000000 -#define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/mpc5xxx" -#define CONFIG_SPL_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ #define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 0fbfa3f..09ee10c 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -304,7 +304,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_LIBCOMMON_SUPPORT diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 8719f76..190ef0e 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -313,7 +313,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_LIBCOMMON_SUPPORT diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 1919cde..ccd9b88 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -321,7 +321,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index ca62461..930b08e 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -299,7 +299,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ diff --git a/include/configs/hermes.h b/include/configs/hermes.h deleted file mode 100644 index 736ffb61..0000000 --- a/include/configs/hermes.h +++ /dev/null @@ -1,315 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC860 1 /* This is a MPC860T CPU */ -#define CONFIG_HERMES 1 /* ...on a HERMES-PRO board */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_BOARD_TYPES 1 /* support board types */ - -#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ - -#define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */ -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 /* Non-Standard value! */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#ifdef DEBUG -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 124 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x4000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - * +0x0004 - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * +0x0000 => 0x000000C0 - */ -#define CONFIG_SYS_SIUMCR 0 - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - * +0x0200 => 0x00C2 - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - * +0x0240 => 0x0082 - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit, set PLL multiplication factor ! - */ -/* +0x0286 => 0x00B0D0C0 */ -#define CONFIG_SYS_PLPRCR \ - ( (11 << PLPRCR_MF_SHIFT) | \ - PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | \ - /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \ - PLPRCR_CSR | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/ \ - ) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -/* +0x0282 => 0x03800000 */ -#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS | \ - SCCR_RTDIV | SCCR_RTSEL | \ - /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \ - SCCR_EBDF00 | SCCR_DFSYNC00 | \ - SCCR_DFBRG00 | SCCR_DFNL000 | \ - SCCR_DFNH000) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/* +0x0220 => 0x00C3 */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration Register 19-4 - *----------------------------------------------------------------------- - */ -/* +0x09C4 => TIMEP=1 */ -#define CONFIG_SYS_RCCR 0x0100 - -/*----------------------------------------------------------------------- - * RMDS - RISC Microcode Development Support Control Register - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RMDS 0 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFE000000 /* FLASH bank #0 */ - -/* used to re-map FLASH - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -/* allow for max 4 MB of Flash */ -#define CONFIG_SYS_REMAP_OR_AM 0xFFC00000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 1, CSNT = 1, SCY = 5, EHTR = 0 */ -#define CONFIG_SYS_OR_TIMING_FLASH ( OR_CSNT_SAM | /*OR_ACS_DIV4 |*/ OR_BI | \ - OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -/* 8 bit, bank valid */ -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -/* - * BR1/OR1 - SDRAM - * - * Multiplexed addresses, GPL5 output to GPL5_A (don't care) - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank */ -#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ -#define SDRAM_TIMING 0x00000A00 /* SDRAM-Timing */ - -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB SDRAM */ - -#define CONFIG_SYS_OR1_PRELIM (SDRAM_PRELIM_OR_AM | SDRAM_TIMING ) -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* - * BR2/OR2 - HPRO2: PEB2256 @ 0xE0000000, 8 Bit wide - */ -#define HPRO2_BASE 0xE0000000 -#define HPRO2_OR_AM 0xFFFF8000 -#define HPRO2_TIMING 0x00000934 - -#define CONFIG_SYS_OR2 (HPRO2_OR_AM | HPRO2_TIMING) -#define CONFIG_SYS_BR2 ((HPRO2_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) - -/* - * BR3/OR3: not used - * BR4/OR4: not used - * BR5/OR5: not used - * BR6/OR6: not used - * BR7/OR7: not used - */ - -/* - * MAMR settings for SDRAM - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -#endif /* __CONFIG_H */ diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 5a5f940..1b9c277 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -28,7 +28,6 @@ #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x00908000 #define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7" #define CONFIG_SPL_STACK 0x0091FFB8 #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT @@ -46,7 +45,7 @@ #if defined(CONFIG_SPL_MMC_SUPPORT) #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 138 /* offset 69KB */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024) #endif diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 58e7295..d43db52 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -671,8 +671,6 @@ #define CONFIG_SPL_TEXT_BASE 0xffff0000 /* last 64 KiB for SPL */ #define CONFIG_SYS_SPL_MAX_LEN (64 << 10) #define CONFIG_UBOOT_PAD_TO 458752 /* decimal for 'dd' */ -#define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/ppc4xx" -#define CONFIG_SPL_LDSCRIPT "arch/powerpc/cpu/ppc4xx/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ #define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/mcx.h b/include/configs/mcx.h index b775ebd..26eb220 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -369,7 +369,7 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" /* NAND boot config */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 27bf89c..8bdc08f 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -75,7 +75,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" /* Partition tables */ diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h index 2daf13c..1185f42 100644 --- a/include/configs/omap3_evm_quick_mmc.h +++ b/include/configs/omap3_evm_quick_mmc.h @@ -87,7 +87,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif /* __OMAP3_EVM_QUICK_MMC_H */ diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h deleted file mode 100644 index 73a95e6..0000000 --- a/include/configs/ph1_ld4.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __PH1_XXX_H -#define __PH1_XXX_H - -/* - * Support Card Select - * - * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. - * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. - * CPLD is re-programmed for ARIMA board compatibility. - * No define - No support card. - */ - -#if 0 -#define CONFIG_PFC_MICRO_SUPPORT_CARD -#else -#define CONFIG_DCC_MICRO_SUPPORT_CARD -#endif - -/* - * Serial Configuration - * SoC UART : enable CONFIG_UNIPHIER_SERIAL - * On-board UART: enable CONFIG_SYS_NS16550_SERIAL - */ -#if 0 -#define CONFIG_SYS_NS16550_SERIAL -#endif - -#define CONFIG_SMC911X - -#define CONFIG_DDR_NUM_CH0 1 -#define CONFIG_DDR_NUM_CH1 1 - -/* - * Memory Size & Mapping - */ -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x10000000 -#define CONFIG_SDRAM1_BASE 0x90000000 -#define CONFIG_SDRAM1_SIZE 0x10000000 - -#define CONFIG_SPL_TEXT_BASE 0x40000 - -#include "uniphier-common.h" - -#endif /* __PH1_XXX_H */ diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h deleted file mode 100644 index fc5132d..0000000 --- a/include/configs/ph1_pro4.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __PH1_XXX_H -#define __PH1_XXX_H - -/* - * Support Card Select - * - * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. - * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. - * CPLD is re-programmed for ARIMA board compatibility. - * No define - No support card. - */ - -#if 0 -#define CONFIG_PFC_MICRO_SUPPORT_CARD -#else -#define CONFIG_DCC_MICRO_SUPPORT_CARD -#endif - -/* - * Serial Configuration - * SoC UART : enable CONFIG_UNIPHIER_SERIAL - * On-board UART: enable CONFIG_SYS_NS16550_SERIAL - */ -#if 0 -#define CONFIG_SYS_NS16550_SERIAL -#endif - -#define CONFIG_SMC911X - -#define CONFIG_DDR_NUM_CH0 2 -#define CONFIG_DDR_NUM_CH1 2 - -#define CONFIG_UNIPHIER_SMP - -/* - * Memory Size & Mapping - */ -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x20000000 -#define CONFIG_SDRAM1_BASE 0xa0000000 -#define CONFIG_SDRAM1_SIZE 0x20000000 - -#define CONFIG_SPL_TEXT_BASE 0x100000 - -#include "uniphier-common.h" - -#endif /* __PH1_XXX_H */ diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h deleted file mode 100644 index e2f1102..0000000 --- a/include/configs/ph1_sld8.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __PH1_XXX_H -#define __PH1_XXX_H - -/* - * Support Card Select - * - * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. - * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. - * CPLD is re-programmed for ARIMA board compatibility. - * No define - No support card. - */ - -#if 0 -#define CONFIG_PFC_MICRO_SUPPORT_CARD -#else -#define CONFIG_DCC_MICRO_SUPPORT_CARD -#endif - -/* - * Serial Configuration - * SoC UART : enable CONFIG_UNIPHIER_SERIAL - * On-board UART: enable CONFIG_SYS_NS16550_SERIAL - */ -#if 0 -#define CONFIG_SYS_NS16550_SERIAL -#endif - -#define CONFIG_SMC911X - -#define CONFIG_DDR_NUM_CH0 1 -#define CONFIG_DDR_NUM_CH1 1 - -/* #define CONFIG_DDR_STANDARD */ - -/* - * Memory Size & Mapping - */ -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x10000000 -#define CONFIG_SDRAM1_BASE 0x90000000 -#define CONFIG_SDRAM1_SIZE 0x10000000 - -#define CONFIG_SPL_TEXT_BASE 0x40000 - -#include "uniphier-common.h" - -#endif /* __PH1_XXX_H */ diff --git a/include/configs/rpi_b.h b/include/configs/rpi.h index 41e975f..4d5426e 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi.h @@ -105,15 +105,15 @@ /* Environment */ #define CONFIG_ENV_SIZE SZ_16K -#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0:1" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_FAT_WRITE #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_SYS_LOAD_ADDR 0x1000000 #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_PREBOOT \ - "if load mmc 0:1 ${loadaddr} /uEnv.txt; then " \ - "env import -t -r ${loadaddr} ${filesize}; " \ - "fi" /* Shell */ #define CONFIG_SYS_MAXARGS 8 @@ -138,7 +138,6 @@ /* Some things don't make sense on this HW or yet */ #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SAVEENV /* Environment */ #define ENV_DEVICE_SETTINGS \ @@ -175,7 +174,6 @@ "pxefile_addr_r=0x00100000\0" \ "kernel_addr_r=0x01000000\0" \ "fdt_addr_r=0x02000000\0" \ - "fdtfile=bcm2835-rpi-b.dtb\0" \ "ramdisk_addr_r=0x02100000\0" \ #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 5b77db2..d5588b1 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -230,7 +230,7 @@ #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index dfbf3cb..f2849d7 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -276,7 +276,7 @@ #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 0d5dba1..21e13e5 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -148,7 +148,7 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index a160329..7d2c0d2 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -304,7 +304,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 2fddef3..deb6bb2 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -178,7 +178,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index aeabb1b..87a4efc 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -144,7 +144,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index a8790c2..bc75172 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -233,7 +233,7 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ /* FAT sd card locations. */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #ifdef CONFIG_SPL_OS_BOOT diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 6e7a7fb..36621a5 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -349,7 +349,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier.h index 2140fcc..dd022fb 100644 --- a/include/configs/uniphier-common.h +++ b/include/configs/uniphier.h @@ -10,10 +10,37 @@ #ifndef __CONFIG_UNIPHIER_COMMON_H__ #define __CONFIG_UNIPHIER_COMMON_H__ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) && \ - defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -# error "Both CONFIG_PFC_MICRO_SUPPORT_CARD and CONFIG_DCC_MICRO_SUPPORT_CARD \ -are defined. Select only one of them." +#if defined(CONFIG_MACH_PH1_PRO4) +#define CONFIG_DDR_NUM_CH0 2 +#define CONFIG_DDR_NUM_CH1 2 + +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x20000000 +#define CONFIG_SDRAM1_BASE 0xa0000000 +#define CONFIG_SDRAM1_SIZE 0x20000000 +#endif + +#if defined(CONFIG_MACH_PH1_LD4) +#define CONFIG_DDR_NUM_CH0 1 +#define CONFIG_DDR_NUM_CH1 1 + +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x10000000 +#define CONFIG_SDRAM1_BASE 0x90000000 +#define CONFIG_SDRAM1_SIZE 0x10000000 +#endif + +#if defined(CONFIG_MACH_PH1_SLD8) +#define CONFIG_DDR_NUM_CH0 1 +#define CONFIG_DDR_NUM_CH1 1 + +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x10000000 +#define CONFIG_SDRAM1_BASE 0x90000000 +#define CONFIG_SDRAM1_SIZE 0x10000000 #endif /* @@ -40,6 +67,13 @@ are defined. Select only one of them." #define CONFIG_SYS_NS16550_REG_SIZE -2 #endif +/* TODO: move to Kconfig and device tree */ +#if 0 +#define CONFIG_SYS_NS16550_SERIAL +#endif + +#define CONFIG_SMC911X + #define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE #define CONFIG_SMC911X_32_BIT @@ -58,6 +92,7 @@ are defined. Select only one of them." #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) @@ -87,17 +122,7 @@ are defined. Select only one of them." #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -# define CONFIG_SYS_FLASH_BANKS_LIST {0x00000000} -# define CONFIG_SYS_FLASH_BANKS_SIZES {0x02000000} -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -# define CONFIG_SYS_FLASH_BANKS_LIST {0x04000000} -# define CONFIG_SYS_FLASH_BANKS_SIZES {0x04000000} -#endif +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2 /* serial console configuration */ #define CONFIG_BAUDRATE 115200 @@ -205,7 +230,6 @@ are defined. Select only one of them." "image_offset=0x00080000\0" \ "image_size=0x00f00000\0" \ "verify=n\0" \ - "autostart=yes\0" \ "norboot=run add_default_bootargs;" \ "bootm $image_offset\0" \ "nandboot=run add_default_bootargs;" \ @@ -233,6 +257,13 @@ are defined. Select only one of them." #define CONFIG_SYS_TEXT_BASE 0x84000000 +#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) +#define CONFIG_SPL_TEXT_BASE 0x00040000 +#endif +#if defined(CONFIG_MACH_PH1_PRO4) +#define CONFIG_SPL_TEXT_BASE 0x00100000 +#endif + #define CONFIG_BOARD_POSTCLK_INIT #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index c39c568..87b4fff 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -265,7 +265,7 @@ #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" diff --git a/include/linux/compat.h b/include/linux/compat.h index 47b0889..b40133c 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -215,13 +215,11 @@ typedef int wait_queue_head_t; #define cond_resched() do { } while (0) #define yield() do { } while (0) -#define __user #define __init #define __exit #define __devinit #define __devinitdata #define __devinitconst -#define __iomem #define kthread_create(...) __builtin_return_address(0) #define kthread_stop(...) do { } while (0) @@ -252,8 +250,6 @@ struct cdev { #define cdev_add(...) 0 #define cdev_del(...) do { } while (0) -#define MAX_ERRNO 4095 - #define prandom_u32(...) 0 typedef struct { |