diff options
Diffstat (limited to 'include')
32 files changed, 24 insertions, 255 deletions
diff --git a/include/common.h b/include/common.h index 695478c..2af555e 100644 --- a/include/common.h +++ b/include/common.h @@ -911,7 +911,7 @@ static inline struct in_addr getenv_ip(char *var) int pcmcia_init (void); -#ifdef CONFIG_STATUS_LED +#ifdef CONFIG_LED_STATUS # include <status_led.h> #endif diff --git a/include/configs/PATI.h b/include/configs/PATI.h index c8d0a58..9589c35 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -50,8 +50,6 @@ #define CONFIG_WATCHDOG /* turn on platform specific watchdog */ -/*#define CONFIG_STATUS_LED 1 */ /* Enable status led */ - #define CONFIG_LOADS_ECHO 1 /* Echo on for serial download */ /* diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 2fd5fa3..41879f8 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -76,12 +76,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#if defined(CONFIG_LCD) -# undef CONFIG_STATUS_LED /* disturbs display */ -#else -# define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#endif /* CONFIG_LCD */ - #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ /* diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 11bba09..ad5c922 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -74,12 +74,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#ifdef CONFIG_LCD -# undef CONFIG_STATUS_LED /* disturbs display */ -#else -# define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#endif /* CONFIG_LCD */ - #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ /* diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 548f1bc..03c7cb9 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -69,8 +69,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ /* diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 582b934..3c716ce 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -69,8 +69,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ /* diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 814290f..c4c90aa 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -71,8 +71,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ /* diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 4a657ff..56e2a45 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -71,8 +71,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ /* enable I2C and select the hardware/software driver */ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index bdfe509..1875609 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -71,8 +71,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ /* diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index ce6b404..15df1da 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -71,8 +71,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ /* diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 66dbcb6..b3b0722 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -74,8 +74,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ /* diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 478f16b..45f10e5 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -74,8 +74,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ /* diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 5501622..8f3efec 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -85,8 +85,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ /* enable I2C and select the hardware/software driver */ diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index b246926..d75b25d 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -79,8 +79,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ /* enable I2C and select the hardware/software driver */ diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index d0a364c..7d75e73 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -138,22 +138,6 @@ #define CONFIG_UART_CONSOLE 1 /* define to enable run status via led */ -/* #define CONFIG_STATUS_LED */ -#ifdef CONFIG_STATUS_LED -#define CONFIG_GPIO_LED -#define CONFIG_BOARD_SPECIFIC_LED -/* use LED0 to indicate booting/alive */ -#define STATUS_LED_BOOT 0 -#define STATUS_LED_BIT GPIO_PF8 -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4) -/* use LED1 to indicate crash */ -#define STATUS_LED_CRASH 1 -#define STATUS_LED_BIT1 GPIO_PG11 -#define STATUS_LED_STATE1 STATUS_LED_ON -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -/* #define STATUS_LED_BIT2 GPIO_PG12 */ -#endif /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index ec4d93c..afb3ef6 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -186,22 +186,6 @@ /* #define CONFIG_SHOW_BOOT_PROGRESS */ /* define to enable run status via led */ -/* #define CONFIG_STATUS_LED */ -#ifdef CONFIG_STATUS_LED -#define CONFIG_GPIO_LED -#define CONFIG_BOARD_SPECIFIC_LED -/* use LED0 to indicate booting/alive */ -#define STATUS_LED_BOOT 0 -#define STATUS_LED_BIT GPIO_PF2 -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4) -/* use LED1 to indicate crash */ -#define STATUS_LED_CRASH 1 -#define STATUS_LED_BIT1 GPIO_PF3 -#define STATUS_LED_STATE1 STATUS_LED_ON -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -/* #define STATUS_LED_BIT2 GPIO_PF4 */ -#endif /* define to enable splash screen support */ diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h index 8297182..6692acc 100644 --- a/include/configs/cl-som-am57x.h +++ b/include/configs/cl-som-am57x.h @@ -28,17 +28,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_REVISION_TAG -/* Status LED */ -#define CONFIG_STATUS_LED /* Status LED enabled */ -#define CONFIG_GPIO_LED -#define CONFIG_BOARD_SPECIFIC_LED -#define GREEN_LED_DEV 0 - /* cl_som_am57x Green LED is GPIO2_5 */ -#define GREEN_LED_GPIO 37 -#define STATUS_LED_BIT GREEN_LED_GPIO -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) - /* PMIC I2C bus number */ #define CONFIG_SYS_SPD_BUS_NUM 3 diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index e693a5f..8d5f26a 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -152,14 +152,7 @@ #define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin) /* Status LED */ -#define CONFIG_STATUS_LED -#define CONFIG_GPIO_LED -#define CONFIG_BOARD_SPECIFIC_LED -#define STATUS_LED_BIT GPIO_PIN(2, 0) /* Status LED polarity is inversed, so init it in the "off" state */ -#define STATUS_LED_STATE STATUS_LED_OFF -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BOOT 0 /* EEPROM */ #define CONFIG_CMD_EEPROM diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 0c72443..ab695cb 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -254,20 +254,12 @@ GENERATED_GBL_DATA_SIZE) /* Status LED */ -#define CONFIG_STATUS_LED /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED -#define CONFIG_GPIO_LED #define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */ -#define GREEN_LED_DEV 0 -#define STATUS_LED_BIT GREEN_LED_GPIO -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BOOT GREEN_LED_DEV #define CONFIG_SPLASHIMAGE_GUARD /* GPIO banks */ -#ifdef CONFIG_STATUS_LED +#ifdef CONFIG_LED_STATUS #define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ #endif diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index 874a889..6ee61d5 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -257,18 +257,10 @@ GENERATED_GBL_DATA_SIZE) /* Status LED */ -#define CONFIG_STATUS_LED /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED -#define CONFIG_GPIO_LED #define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */ -#define GREEN_LED_DEV 0 -#define STATUS_LED_BIT GREEN_LED_GPIO -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BOOT GREEN_LED_DEV /* GPIO banks */ -#ifdef CONFIG_STATUS_LED +#ifdef CONFIG_LED_STATUS #define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ #endif diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 4a868c5..dc08db6 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -35,13 +35,7 @@ #define CONFIG_HW_WATCHDOG -#define CONFIG_STATUS_LED -#define CONFIG_BOARD_SPECIFIC_LED #define STATUS_LED_ACTIVE 0 -#define STATUS_LED_BIT 0x0008 /* Timer7 GPIO */ -#define STATUS_LED_BOOT 0 -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_STATE STATUS_LED_OFF /*----------------------------------------------------------------------* * Configuration for environment * @@ -65,7 +59,6 @@ */ #define CONFIG_CMDLINE_EDITING #define CONFIG_CMD_DATE -#define CONFIG_CMD_LED #define CONFIG_MCFTMR diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 9080b9a..9cc62ed 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -102,20 +102,7 @@ #define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0} /* Status LED */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED 1 -#define STATUS_LED_GREEN 0 -#define STATUS_LED_RED 1 -/* Green */ -#define STATUS_LED_BIT STATUS_LED_GREEN -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -/* Red */ -#define STATUS_LED_BIT1 STATUS_LED_RED -#define STATUS_LED_STATE1 STATUS_LED_OFF -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) /* Optional value */ -#define STATUS_LED_BOOT STATUS_LED_BIT /* Network hardware configuration */ #define CONFIG_DRIVER_EP93XX_MAC diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 917350f..9b8a7ea 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -283,24 +283,10 @@ /* * Status LED configuration */ -#define CONFIG_STATUS_LED /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED #define ENABLE_GPIO_OUT 0x00000024 #define LED_ON 0x00000010 -#ifndef __ASSEMBLY__ -/* - * In case of Motion-PRO, a LED is identified by its corresponding - * GPT Enable and Mode Select Register. - */ -typedef volatile unsigned long * led_id_t; - -extern void __led_init(led_id_t id, int state); -extern void __led_toggle(led_id_t id); -extern void __led_set(led_id_t id, int state); -#endif /* __ASSEMBLY__ */ - /* * Temperature sensor */ diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index 36ff7ce..d05b922 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_LED - /* Memory configuration */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ @@ -34,13 +32,6 @@ #endif /* Status LED */ -#define CONFIG_STATUS_LED -#define CONFIG_GPIO_LED -#define CONFIG_BOARD_SPECIFIC_LED -#define STATUS_LED_BOOT 0 -#define STATUS_LED_BIT MX23_PAD_SSP1_DETECT__GPIO_2_1 -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* USB */ #ifdef CONFIG_CMD_USB diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 9850aa6..c69b325 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -35,16 +35,6 @@ #define CONFIG_ENV_OVERWRITE /* Status LED */ -#define CONFIG_STATUS_LED 1 -#define CONFIG_BOARD_SPECIFIC_LED 1 -#define STATUS_LED_BIT 0x01 -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BIT1 0x02 -#define STATUS_LED_STATE1 STATUS_LED_ON -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BOOT STATUS_LED_BIT -#define STATUS_LED_GREEN STATUS_LED_BIT1 /* Enable Multi Bus support for I2C */ #define CONFIG_I2C_MULTI_BUS 1 @@ -88,7 +78,6 @@ "4m(kernel),-(fs)" #define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_LED /* LED support */ #define CONFIG_VIDEO_OMAP3 /* DSS Support */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index e6d7db0..ac0df3e 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -30,19 +30,11 @@ /* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */ #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) -#define CONFIG_STATUS_LED -#define CONFIG_BOARD_SPECIFIC_LED -#define CONFIG_GPIO_LED #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) #define RED_LED_GPIO 27 #elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) #define RED_LED_GPIO 16 #endif -#define RED_LED_DEV 0 -#define STATUS_LED_BIT RED_LED_GPIO -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BOOT RED_LED_DEV #endif /* GPIO banks */ diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index 94d10a3..427d559 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -15,7 +15,6 @@ #define CONFIG_HW_WATCHDOG #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_LED /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on VINING_FPGA */ @@ -43,21 +42,6 @@ * 2 ... Bottom Green * 3 ... Bottom Red */ -#define CONFIG_STATUS_LED -#define CONFIG_GPIO_LED -#define CONFIG_BOARD_SPECIFIC_LED -#define STATUS_LED_BIT 48 -#define STATUS_LED_STATE STATUS_LED_OFF -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BIT1 53 -#define STATUS_LED_STATE1 STATUS_LED_OFF -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BIT2 54 -#define STATUS_LED_STATE2 STATUS_LED_OFF -#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BIT3 65 -#define STATUS_LED_STATE3 STATUS_LED_OFF -#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) /* Ethernet on SoC (EMAC) */ #if defined(CONFIG_CMD_NET) diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index f05c1aa..6b35641 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -42,7 +42,6 @@ #define CONFIG_ENV_SECT_SIZE (128 << 10) #define CONFIG_ENV_SIZE (8 << 10) -#define CONFIG_BOARD_SPECIFIC_LED #define CONFIG_RED_LED 110 #define CONFIG_GREEN_LED 109 diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h index 96f15cd..a378406 100644 --- a/include/configs/tqma6_wru4.h +++ b/include/configs/tqma6_wru4.h @@ -37,27 +37,6 @@ #define CONFIG_CMD_DATE /* LED */ -#define CONFIG_CMD_LED -#define CONFIG_STATUS_LED -#define CONFIG_BOARD_SPECIFIC_LED -#define STATUS_LED_BIT 0 -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BIT1 1 -#define STATUS_LED_STATE1 STATUS_LED_ON -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BIT2 2 -#define STATUS_LED_STATE2 STATUS_LED_ON -#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BIT3 3 -#define STATUS_LED_STATE3 STATUS_LED_ON -#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BIT4 4 -#define STATUS_LED_STATE4 STATUS_LED_ON -#define STATUS_LED_PERIOD4 (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BIT5 5 -#define STATUS_LED_STATE5 STATUS_LED_ON -#define STATUS_LED_PERIOD5 (CONFIG_SYS_HZ / 2) /* Bootcounter */ #define CONFIG_BOOTCOUNT_LIMIT diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index a300f38..a961e5c 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -60,18 +60,6 @@ #define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 are in GPIO bank 2 */ /* LED support */ -#define CONFIG_STATUS_LED -#define CONFIG_BOARD_SPECIFIC_LED -#define CONFIG_CMD_LED /* LED command */ -#define STATUS_LED_BIT (1 << 0) -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BIT1 (1 << 1) -#define STATUS_LED_STATE1 STATUS_LED_ON -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BIT2 (1 << 2) -#define STATUS_LED_STATE2 STATUS_LED_ON -#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 229c242..7d01323 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -291,8 +291,6 @@ /* * Status LED */ -#define CONFIG_STATUS_LED /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ #define CONFIG_SYS_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */ #ifndef __ASSEMBLY__ diff --git a/include/status_led.h b/include/status_led.h index 396ea88..f838f36 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -17,11 +17,24 @@ #ifndef _STATUS_LED_H_ #define _STATUS_LED_H_ -#ifdef CONFIG_STATUS_LED - -#define STATUS_LED_OFF 0 -#define STATUS_LED_BLINKING 1 -#define STATUS_LED_ON 2 +#ifdef CONFIG_LED_STATUS + +#define LED_STATUS_PERIOD (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ) +#ifdef CONFIG_LED_STATUS1 +#define LED_STATUS_PERIOD1 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ1) +#endif /* CONFIG_LED_STATUS1 */ +#ifdef CONFIG_LED_STATUS2 +#define LED_STATUS_PERIOD2 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ2) +#endif /* CONFIG_LED_STATUS2 */ +#ifdef CONFIG_LED_STATUS3 +#define LED_STATUS_PERIOD3 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ3) +#endif /* CONFIG_LED_STATUS3 */ +#ifdef CONFIG_LED_STATUS4 +#define LED_STATUS_PERIOD4 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ4) +#endif /* CONFIG_LED_STATUS4 */ +#ifdef CONFIG_LED_STATUS5 +#define LED_STATUS_PERIOD5 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ5) +#endif /* CONFIG_LED_STATUS5 */ void status_led_init(void); void status_led_tick (unsigned long timestamp); @@ -34,14 +47,8 @@ void status_led_set (int led, int state); # define STATUS_LED_ODR im_cpm.cp_pbodr # define STATUS_LED_DAT im_cpm.cp_pbdat -# define STATUS_LED_BIT 0x00000001 -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - # define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - /***** MVS v1 **********************************************************/ #elif (defined(CONFIG_MVS) && CONFIG_MVS < 2) # define STATUS_LED_PAR im_ioport.iop_pdpar @@ -49,17 +56,10 @@ void status_led_set (int led, int state); # undef STATUS_LED_ODR # define STATUS_LED_DAT im_ioport.iop_pddat -# define STATUS_LED_BIT 0x00000001 -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - # define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - /***** Someone else defines these *************************************/ #elif defined(STATUS_LED_PAR) - /* * ADVICE: Define in your board configuration file rather than * filling this file up with lots of custom board stuff. @@ -67,26 +67,9 @@ void status_led_set (int led, int state); #elif defined(CONFIG_V38B) -# define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */ -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - # define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -#elif defined(CONFIG_MOTIONPRO) - -#define STATUS_LED_BIT ((vu_long *) MPC5XXX_GPT6_ENABLE) -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10) -#define STATUS_LED_STATE STATUS_LED_BLINKING - -#define STATUS_LED_BIT1 ((vu_long *) MPC5XXX_GPT7_ENABLE) -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 10) -#define STATUS_LED_STATE1 STATUS_LED_OFF - -#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ -#elif defined(CONFIG_BOARD_SPECIFIC_LED) +#elif defined(CONFIG_LED_STATUS_BOARD_SPECIFIC) /* led_id_t is unsigned long mask */ typedef unsigned long led_id_t; @@ -99,11 +82,11 @@ void __led_blink(led_id_t mask, int freq); #endif /************************************************************************/ -#ifndef CONFIG_BOARD_SPECIFIC_LED +#ifndef CONFIG_LED_STATUS_BOARD_SPECIFIC # include <asm/status_led.h> #endif -#endif /* CONFIG_STATUS_LED */ +#endif /* CONFIG_LED_STATUS */ /* * Coloured LEDs API |