diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/fsl_qe.h | 299 |
1 files changed, 299 insertions, 0 deletions
diff --git a/include/fsl_qe.h b/include/fsl_qe.h new file mode 100644 index 0000000..77b18e9 --- /dev/null +++ b/include/fsl_qe.h @@ -0,0 +1,299 @@ +/* + * Copyright (C) 2006-2009 Freescale Semiconductor, Inc. + * + * Dave Liu <daveliu@freescale.com> + * based on source code of Shlomi Gridish + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __QE_H__ +#define __QE_H__ + +#include "common.h" +#ifdef CONFIG_U_QE +#include <linux/immap_qe.h> +#endif + +#define QE_NUM_OF_BRGS 16 +#define UCC_MAX_NUM 8 + +#define QE_DATAONLY_BASE 0 +#define QE_DATAONLY_SIZE (QE_MURAM_SIZE - QE_DATAONLY_BASE) + +/* QE threads SNUM +*/ +typedef enum qe_snum_state { + QE_SNUM_STATE_USED, /* used */ + QE_SNUM_STATE_FREE /* free */ +} qe_snum_state_e; + +typedef struct qe_snum { + u8 num; /* snum */ + qe_snum_state_e state; /* state */ +} qe_snum_t; + +/* QE RISC allocation +*/ +#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */ +#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */ +#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */ +#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */ +#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \ + QE_RISC_ALLOCATION_RISC2) +#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \ + QE_RISC_ALLOCATION_RISC2 | \ + QE_RISC_ALLOCATION_RISC3 | \ + QE_RISC_ALLOCATION_RISC4) + +/* QE CECR commands for UCC fast. +*/ +#define QE_CR_FLG 0x00010000 +#define QE_RESET 0x80000000 +#define QE_INIT_TX_RX 0x00000000 +#define QE_INIT_RX 0x00000001 +#define QE_INIT_TX 0x00000002 +#define QE_ENTER_HUNT_MODE 0x00000003 +#define QE_STOP_TX 0x00000004 +#define QE_GRACEFUL_STOP_TX 0x00000005 +#define QE_RESTART_TX 0x00000006 +#define QE_SWITCH_COMMAND 0x00000007 +#define QE_SET_GROUP_ADDRESS 0x00000008 +#define QE_INSERT_CELL 0x00000009 +#define QE_ATM_TRANSMIT 0x0000000a +#define QE_CELL_POOL_GET 0x0000000b +#define QE_CELL_POOL_PUT 0x0000000c +#define QE_IMA_HOST_CMD 0x0000000d +#define QE_ATM_MULTI_THREAD_INIT 0x00000011 +#define QE_ASSIGN_PAGE 0x00000012 +#define QE_START_FLOW_CONTROL 0x00000014 +#define QE_STOP_FLOW_CONTROL 0x00000015 +#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 +#define QE_GRACEFUL_STOP_RX 0x0000001a +#define QE_RESTART_RX 0x0000001b + +/* QE CECR Sub Block Code - sub block code of QE command. +*/ +#define QE_CR_SUBBLOCK_INVALID 0x00000000 +#define QE_CR_SUBBLOCK_USB 0x03200000 +#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 +#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 +#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 +#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 +#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 +#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 +#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 +#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 +#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 +#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 +#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 +#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 +#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 +#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 +#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 +#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 +#define QE_CR_SUBBLOCK_MCC1 0x03800000 +#define QE_CR_SUBBLOCK_MCC2 0x03a00000 +#define QE_CR_SUBBLOCK_MCC3 0x03000000 +#define QE_CR_SUBBLOCK_IDMA1 0x02800000 +#define QE_CR_SUBBLOCK_IDMA2 0x02a00000 +#define QE_CR_SUBBLOCK_IDMA3 0x02c00000 +#define QE_CR_SUBBLOCK_IDMA4 0x02e00000 +#define QE_CR_SUBBLOCK_HPAC 0x01e00000 +#define QE_CR_SUBBLOCK_SPI1 0x01400000 +#define QE_CR_SUBBLOCK_SPI2 0x01600000 +#define QE_CR_SUBBLOCK_RAND 0x01c00000 +#define QE_CR_SUBBLOCK_TIMER 0x01e00000 +#define QE_CR_SUBBLOCK_GENERAL 0x03c00000 + +/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command. +*/ +#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ +#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 +#define QE_CR_PROTOCOL_ATM_POS 0x0A +#define QE_CR_PROTOCOL_ETHERNET 0x0C +#define QE_CR_PROTOCOL_L2_SWITCH 0x0D +#define QE_CR_PROTOCOL_SHIFT 6 + +/* QE ASSIGN PAGE command +*/ +#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT 17 + +/* Communication Direction. +*/ +typedef enum comm_dir { + COMM_DIR_NONE = 0, + COMM_DIR_RX = 1, + COMM_DIR_TX = 2, + COMM_DIR_RX_AND_TX = 3 +} comm_dir_e; + +/* Clocks and BRG's +*/ +typedef enum qe_clock { + QE_CLK_NONE = 0, + QE_BRG1, /* Baud Rate Generator 1 */ + QE_BRG2, /* Baud Rate Generator 2 */ + QE_BRG3, /* Baud Rate Generator 3 */ + QE_BRG4, /* Baud Rate Generator 4 */ + QE_BRG5, /* Baud Rate Generator 5 */ + QE_BRG6, /* Baud Rate Generator 6 */ + QE_BRG7, /* Baud Rate Generator 7 */ + QE_BRG8, /* Baud Rate Generator 8 */ + QE_BRG9, /* Baud Rate Generator 9 */ + QE_BRG10, /* Baud Rate Generator 10 */ + QE_BRG11, /* Baud Rate Generator 11 */ + QE_BRG12, /* Baud Rate Generator 12 */ + QE_BRG13, /* Baud Rate Generator 13 */ + QE_BRG14, /* Baud Rate Generator 14 */ + QE_BRG15, /* Baud Rate Generator 15 */ + QE_BRG16, /* Baud Rate Generator 16 */ + QE_CLK1, /* Clock 1 */ + QE_CLK2, /* Clock 2 */ + QE_CLK3, /* Clock 3 */ + QE_CLK4, /* Clock 4 */ + QE_CLK5, /* Clock 5 */ + QE_CLK6, /* Clock 6 */ + QE_CLK7, /* Clock 7 */ + QE_CLK8, /* Clock 8 */ + QE_CLK9, /* Clock 9 */ + QE_CLK10, /* Clock 10 */ + QE_CLK11, /* Clock 11 */ + QE_CLK12, /* Clock 12 */ + QE_CLK13, /* Clock 13 */ + QE_CLK14, /* Clock 14 */ + QE_CLK15, /* Clock 15 */ + QE_CLK16, /* Clock 16 */ + QE_CLK17, /* Clock 17 */ + QE_CLK18, /* Clock 18 */ + QE_CLK19, /* Clock 19 */ + QE_CLK20, /* Clock 20 */ + QE_CLK21, /* Clock 21 */ + QE_CLK22, /* Clock 22 */ + QE_CLK23, /* Clock 23 */ + QE_CLK24, /* Clock 24 */ + QE_CLK_DUMMY +} qe_clock_e; + +/* QE CMXGCR register +*/ +#define QE_CMXGCR_MII_ENET_MNG_MASK 0x00007000 +#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 + +/* QE CMXUCR registers + */ +#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F + +/* QE BRG configuration register +*/ +#define QE_BRGC_ENABLE 0x00010000 +#define QE_BRGC_DIVISOR_SHIFT 1 +#define QE_BRGC_DIVISOR_MAX 0xFFF +#define QE_BRGC_DIV16 1 + +/* QE SDMA registers +*/ +#define QE_SDSR_BER1 0x02000000 +#define QE_SDSR_BER2 0x01000000 + +#define QE_SDMR_GLB_1_MSK 0x80000000 +#define QE_SDMR_ADR_SEL 0x20000000 +#define QE_SDMR_BER1_MSK 0x02000000 +#define QE_SDMR_BER2_MSK 0x01000000 +#define QE_SDMR_EB1_MSK 0x00800000 +#define QE_SDMR_ER1_MSK 0x00080000 +#define QE_SDMR_ER2_MSK 0x00040000 +#define QE_SDMR_CEN_MASK 0x0000E000 +#define QE_SDMR_SBER_1 0x00000200 +#define QE_SDMR_SBER_2 0x00000200 +#define QE_SDMR_EB1_PR_MASK 0x000000C0 +#define QE_SDMR_ER1_PR 0x00000008 + +#define QE_SDMR_CEN_SHIFT 13 +#define QE_SDMR_EB1_PR_SHIFT 6 + +#define QE_SDTM_MSNUM_SHIFT 24 + +#define QE_SDEBCR_BA_MASK 0x01FFFFFF + +/* Communication Processor */ +#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */ +#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */ +#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */ + +/* I-RAM */ +#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ +#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ +#define QE_IRAM_READY 0x80000000 + +/* Structure that defines QE firmware binary files. + * + * See doc/README.qe_firmware for a description of these fields. + */ +struct qe_firmware { + struct qe_header { + u32 length; /* Length of the entire structure, in bytes */ + u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */ + u8 version; /* Version of this layout. First ver is '1' */ + } header; + u8 id[62]; /* Null-terminated identifier string */ + u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */ + u8 count; /* Number of microcode[] structures */ + struct { + u16 model; /* The SOC model */ + u8 major; /* The SOC revision major */ + u8 minor; /* The SOC revision minor */ + } __attribute__ ((packed)) soc; + u8 padding[4]; /* Reserved, for alignment */ + u64 extended_modes; /* Extended modes */ + u32 vtraps[8]; /* Virtual trap addresses */ + u8 reserved[4]; /* Reserved, for future expansion */ + struct qe_microcode { + u8 id[32]; /* Null-terminated identifier */ + u32 traps[16]; /* Trap addresses, 0 == ignore */ + u32 eccr; /* The value for the ECCR register */ + u32 iram_offset;/* Offset into I-RAM for the code */ + u32 count; /* Number of 32-bit words of the code */ + u32 code_offset;/* Offset of the actual microcode */ + u8 major; /* The microcode version major */ + u8 minor; /* The microcode version minor */ + u8 revision; /* The microcode version revision */ + u8 padding; /* Reserved, for alignment */ + u8 reserved[4]; /* Reserved, for future expansion */ + } __attribute__ ((packed)) microcode[1]; + /* All microcode binaries should be located here */ + /* CRC32 should be located here, after the microcode binaries */ +} __attribute__ ((packed)); + +struct qe_firmware_info { + char id[64]; /* Firmware name */ + u32 vtraps[8]; /* Virtual trap addresses */ + u64 extended_modes; /* Extended modes */ +}; + +void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign); +void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data); +uint qe_muram_alloc(uint size, uint align); +void *qe_muram_addr(uint offset); +int qe_get_snum(void); +void qe_put_snum(u8 snum); +void qe_init(uint qe_base); +void qe_reset(void); +void qe_assign_page(uint snum, uint para_ram_base); +int qe_set_brg(uint brg, uint rate); +int qe_set_mii_clk_src(int ucc_num); +int qe_upload_firmware(const struct qe_firmware *firmware); +struct qe_firmware_info *qe_get_firmware_info(void); +void ft_qe_setup(void *blob); +void qe_init(uint qe_base); +void qe_reset(void); + +#ifdef CONFIG_U_QE +void u_qe_init(void); +int u_qe_upload_firmware(const struct qe_firmware *firmware); +void u_qe_resume(void); +int u_qe_firmware_resume(const struct qe_firmware *firmware, + qe_map_t *qe_immrr); +#endif + +#endif /* __QE_H__ */ |