diff options
Diffstat (limited to 'include')
109 files changed, 1544 insertions, 594 deletions
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 74df210..9c5a1e1 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -91,6 +91,7 @@ typedef struct global_data { unsigned long malloc_limit; /* limit address */ unsigned long malloc_ptr; /* current address */ #endif + struct udevice *cur_serial_dev; /* current serial device */ struct arch_global_data arch; /* architecture-specific data */ } gd_t; #endif @@ -107,5 +108,6 @@ typedef struct global_data { #define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */ #define GD_FLG_ENV_READY 0x00080 /* Env. imported into hash table */ #define GD_FLG_SERIAL_READY 0x00100 /* Pre-reloc serial console ready */ +#define GD_FLG_FULL_MALLOC_INIT 0x00200 /* Full malloc() is ready */ #endif /* __ASM_GENERIC_GBL_DATA_H */ diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index f81b51a..36a36c6 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -257,6 +257,15 @@ const char *gpio_get_bank_info(struct udevice *dev, int *offset_count); int gpio_lookup_name(const char *name, struct udevice **devp, unsigned int *offsetp, unsigned int *gpiop); -int name_to_gpio(const char *name); +/** + * get_gpios() - Turn the values of a list of GPIOs into an integer + * + * This puts the value of the first GPIO into bit 0, the second into bit 1, + * etc. then returns the resulting integer. + * + * @gpio_list: List of GPIOs to collect + * @return resulting integer value + */ +unsigned gpio_get_values_as_int(const int *gpio_list); #endif /* _ASM_GENERIC_GPIO_H_ */ diff --git a/include/common.h b/include/common.h index ecf7fca..f1ab2cf 100644 --- a/include/common.h +++ b/include/common.h @@ -23,6 +23,7 @@ typedef volatile unsigned char vu_char; #include <linux/stringify.h> #include <asm/ptrace.h> #include <stdarg.h> +#include <linux/kernel.h> #if defined(CONFIG_PCI) && defined(CONFIG_4xx) #include <pci.h> #endif @@ -96,15 +97,19 @@ typedef volatile unsigned char vu_char; #define _DEBUG 0 #endif +#ifndef pr_fmt +#define pr_fmt(fmt) fmt +#endif + /* * Output a debug text when condition "cond" is met. The "cond" should be * computed by a preprocessor in the best case, allowing for the best * optimization. */ -#define debug_cond(cond, fmt, args...) \ - do { \ - if (cond) \ - printf(fmt, ##args); \ +#define debug_cond(cond, fmt, args...) \ + do { \ + if (cond) \ + printf(pr_fmt(fmt), ##args); \ } while (0) #define debug(fmt, args...) \ @@ -126,7 +131,7 @@ void __assert_fail(const char *assertion, const char *file, unsigned line, __assert_fail(#x, __FILE__, __LINE__, __func__); }) #define error(fmt, args...) do { \ - printf("ERROR: " fmt "\nat %s:%d/%s()\n", \ + printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \ ##args, __FILE__, __LINE__, __func__); \ } while (0) @@ -168,58 +173,6 @@ typedef void (interrupt_handler_t)(void *); # endif #endif -/* - * General Purpose Utilities - */ -#define min(X, Y) \ - ({ typeof(X) __x = (X); \ - typeof(Y) __y = (Y); \ - (__x < __y) ? __x : __y; }) - -#define max(X, Y) \ - ({ typeof(X) __x = (X); \ - typeof(Y) __y = (Y); \ - (__x > __y) ? __x : __y; }) - -#define min3(X, Y, Z) \ - ({ typeof(X) __x = (X); \ - typeof(Y) __y = (Y); \ - typeof(Z) __z = (Z); \ - __x < __y ? (__x < __z ? __x : __z) : \ - (__y < __z ? __y : __z); }) - -#define max3(X, Y, Z) \ - ({ typeof(X) __x = (X); \ - typeof(Y) __y = (Y); \ - typeof(Z) __z = (Z); \ - __x > __y ? (__x > __z ? __x : __z) : \ - (__y > __z ? __y : __z); }) - -/* - * Return the absolute value of a number. - * - * This handles unsigned and signed longs, ints, shorts and chars. For all - * input types abs() returns a signed long. - * - * For 64-bit types, use abs64() - */ -#define abs(x) ({ \ - long ret; \ - if (sizeof(x) == sizeof(long)) { \ - long __x = (x); \ - ret = (__x < 0) ? -__x : __x; \ - } else { \ - int __x = (x); \ - ret = (__x < 0) ? -__x : __x; \ - } \ - ret; \ - }) - -#define abs64(x) ({ \ - s64 __x = (x); \ - (__x < 0) ? -__x : __x; \ - }) - #if defined(CONFIG_ENV_IS_EMBEDDED) #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ @@ -230,17 +183,6 @@ typedef void (interrupt_handler_t)(void *); #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN #endif -/** - * container_of - cast a member of a structure out to the containing structure - * @ptr: the pointer to the member. - * @type: the type of the container struct this is embedded in. - * @member: the name of the member within the struct. - * - */ -#define container_of(ptr, type, member) ({ \ - const typeof( ((type *)0)->member ) *__mptr = (ptr); \ - (type *)( (char *)__mptr - offsetof(type,member) );}) - /* * Function Prototypes */ @@ -947,31 +889,7 @@ static inline phys_addr_t map_to_sysmem(const void *ptr) #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. #endif -#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) - #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) -#define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d)) -#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) -#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) - -/* - * Divide positive or negative dividend by positive divisor and round - * to closest integer. Result is undefined for negative divisors and - * for negative dividends if the divisor variable type is unsigned. - */ -#define DIV_ROUND_CLOSEST(x, divisor)( \ -{ \ - typeof(x) __x = x; \ - typeof(divisor) __d = divisor; \ - (((typeof(x))-1) > 0 || \ - ((typeof(divisor))-1) > 0 || (__x) > 0) ? \ - (((__x) + ((__d) / 2)) / (__d)) : \ - (((__x) - ((__d) / 2)) / (__d)); \ -} \ -) - -#define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1) -#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask)) /* * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It @@ -1053,7 +971,7 @@ static inline phys_addr_t map_to_sysmem(const void *ptr) * Usage of this macro shall be avoided or used with extreme care! */ #define DEFINE_ALIGN_BUFFER(type, name, size, align) \ - static char __##name[roundup(size * sizeof(type), align)] \ + static char __##name[ALIGN(size * sizeof(type), align)] \ __aligned(align); \ \ static type *name = (type *)__##name diff --git a/include/config_defaults.h b/include/config_defaults.h index ad08c1d..4d49315 100644 --- a/include/config_defaults.h +++ b/include/config_defaults.h @@ -20,4 +20,10 @@ #define CONFIG_ZLIB 1 #define CONFIG_PARTITIONS 1 +#ifndef CONFIG_SPL_BUILD +#define CONFIG_DM_WARN +#define CONFIG_DM_DEVICE_REMOVE +#define CONFIG_DM_STDIO +#endif + #endif diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 1d0664d..2178f9d 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -730,7 +730,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 2bb86e4..216f34f 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -745,7 +745,6 @@ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 2733358..2f381e7 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -791,7 +791,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 400d979..47b3bd5 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -750,7 +750,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index a97f5fa..94078f5 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -20,8 +20,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T /* This is an ARM920T Core */ -#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C24X0 /* This is a SAMSUNG S3C24x0-type SoC */ #define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */ #define CONFIG_VCMA9 /* on a MPL VCMA9 Board */ #define CONFIG_MACH_TYPE MACH_TYPE_MPL_VCMA9 /* Machine type */ diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index a4050f3..120fdc6 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -14,6 +14,8 @@ #define CONFIG_MPC5200 #define CONFIG_A3M071 /* A3M071 board */ +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_TEXT_BASE 0x01000000 /* boot low for 32 MiB boards */ diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index cc88ac1..3c67655 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -19,6 +19,8 @@ #define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_A4M072 1 /* ... on A4M072 board */ #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_TEXT_BASE 0xFE000000 diff --git a/include/configs/apf27.h b/include/configs/apf27.h index 4424c30..403692d 100644 --- a/include/configs/apf27.h +++ b/include/configs/apf27.h @@ -18,8 +18,7 @@ /* * SoC configurations */ -#define CONFIG_ARM926EJS /* this is an ARM926EJS CPU */ -#define CONFIG_MX27 /* in a Freescale i.MX27 Chip */ +#define CONFIG_MX27 /* This is a Freescale i.MX27 Chip */ #define CONFIG_MACH_TYPE 1698 /* APF27 */ #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index b073b97..72469f3 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -10,7 +10,6 @@ #define __ARMADILLO_800EVA_H #undef DEBUG -#define CONFIG_ARMV7 #define CONFIG_R8A7740 #define CONFIG_RMOBILE_BOARD_STRING "Armadillo-800EVA Board\n" #define CONFIG_SH_GPIO_PFC diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index bf09939..1045779 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -10,8 +10,7 @@ #include <linux/sizes.h> #include <asm/arch/sysmap.h> -/* Architecture, CPU, chip, mach, etc */ -#define CONFIG_ARMV7 +/* CPU, chip, mach, etc */ #define CONFIG_KONA #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/bcm_ep_board.h b/include/configs/bcm_ep_board.h index 827844e..fb85c72 100644 --- a/include/configs/bcm_ep_board.h +++ b/include/configs/bcm_ep_board.h @@ -9,8 +9,6 @@ #include <asm/arch/configs.h> -/* Architecture, CPU, chip, etc */ -#define CONFIG_ARMV7 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index d0828d5..39982ef 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -122,8 +122,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 20f6ed1..50e85ca 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -134,8 +134,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index c33d035..7fc882a 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -131,8 +131,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h index b497f26..c2958e8 100644 --- a/include/configs/bf527-ad7160-eval.h +++ b/include/configs/bf527-ad7160-eval.h @@ -119,8 +119,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 0bca53f..79e440a 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -134,8 +134,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h index 9d43b81..b374ab5 100644 --- a/include/configs/bf527-sdp.h +++ b/include/configs/bf527-sdp.h @@ -103,8 +103,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 3bc364c..6df89af 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -121,8 +121,8 @@ /* * I2C settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI #define CONFIG_SYS_I2C_SPEED 50000 #define CONFIG_SYS_I2C_SLAVE 0 diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index ba74a69..4f2b2cb 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -142,8 +142,8 @@ /* * I2C settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index 0b723cf..d01d88f 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -120,8 +120,8 @@ /* * I2C settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI #define CONFIG_SYS_I2C_SPEED 50000 #define CONFIG_SYS_I2C_SLAVE 0 diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 29f9316..7b5a5a7 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -128,8 +128,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index a655282..e60558e 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -126,8 +126,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index da5f029..e71e6d3 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -134,8 +134,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 12192ff..878009f 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -81,8 +81,8 @@ #define CONFIG_PHYLIB /* i2c Settings */ -#define CONFIG_BFIN_TWI_I2C -#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* * Flash Settings diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 07ec5f2..143d3dd 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -73,7 +73,7 @@ # ifdef CONFIG_SPI_FLASH # define CONFIG_CMD_SF # endif -# if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) +# if defined(CONFIG_SYS_I2C) || defined(CONFIG_SYS_I2C_SOFT) # define CONFIG_CMD_I2C # define CONFIG_SOFT_I2C_READ_REPEATED_START # endif @@ -301,7 +301,7 @@ /* * I2C Settings */ -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) +#if defined(CONFIG_SYS_I2C) || defined(CONFIG_SYS_I2C_SOFT) # ifndef CONFIG_SYS_I2C_SPEED # define CONFIG_SYS_I2C_SPEED 50000 # endif diff --git a/include/configs/br4.h b/include/configs/br4.h index 3f24008..48cf184 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -102,8 +102,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C -#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/calimain.h b/include/configs/calimain.h index b27f973..44c947f 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -24,7 +24,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_CALIMAIN -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 5f30279..f8785db 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -14,7 +14,6 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ #define CONFIG_SOC_DM365 diff --git a/include/configs/chromebook_link.h b/include/configs/chromebook_link.h new file mode 100644 index 0000000..8caeca6 --- /dev/null +++ b/include/configs/chromebook_link.h @@ -0,0 +1,74 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * (C) Copyright 2008 + * Graeme Russ, graeme.russ@gmail.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/x86-common.h> + +#define CONFIG_SYS_CAR_ADDR 0xff7e0000 +#define CONFIG_SYS_CAR_SIZE (128 * 1024) +#define CONFIG_SYS_MONITOR_LEN (1 << 20) +#define CONFIG_DCACHE_RAM_MRC_VAR_SIZE 0x4000 +#define CONFIG_SYS_X86_START16 0xfffff800 +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_X86_RESET_VECTOR +#define CONFIG_NR_DRAM_BANKS 8 +#define CONFIG_X86_MRC_START 0xfffa0000 +#define CONFIG_CACHE_MRC_SIZE_KB 512 + +#define CONFIG_COREBOOT_SERIAL + +#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_NM10_AHCI}, \ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE}, \ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6}, \ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE} + +/* + * These common x86 features are not yet supported, but are added in + * follow-on patches in this series. Add undefs here to avoid every patch + * having to put things back into x86-common.h + */ +#undef CONFIG_VIDEO +#undef CONFIG_CFB_CONSOLE +#undef CONFIG_ICH_SPI +#undef CONFIG_SPI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_SF +#undef CONFIG_USB_EHCI +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_SCSI + +#define CONFIG_PCI_MEM_BUS 0xe0000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_PREF_BUS 0xd0000000 +#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS +#define CONFIG_PCI_PREF_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x1000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0xefff + +#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \ + "stdout=vga,serial\0" \ + "stderr=vga,serial\0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index f5351ad..643c837 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -113,8 +113,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 1729b44..e059568 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -122,8 +122,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 272aa74..1f26457 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -120,8 +120,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 7f27eda..72eafc5 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -104,8 +104,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index fef267f..2581380 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -6,7 +6,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <asm/ibmpc.h> /* * board/config.h - configuration options, board specific */ @@ -14,27 +13,23 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <configs/x86-common.h> + /* * High Level Configuration Options * (easy to change) */ #define CONFIG_SYS_COREBOOT -#define CONFIG_SHOW_BOOT_PROGRESS #define CONFIG_LAST_STAGE_INIT -#define CONFIG_SYS_VSNPRINTF -#define CONFIG_ZBOOT_32 -#define CONFIG_PHYSMEM #define CONFIG_SYS_EARLY_PCI_INIT -#define CONFIG_DISPLAY_BOARDINFO_LATE -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL +#define CONFIG_SYS_CAR_ADDR 0x19200000 +#define CONFIG_SYS_CAR_SIZE (16 * 1024) +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_LMB -#define CONFIG_OF_LIBFDT +#define CONFIG_TRACE_EARLY_SIZE (8 << 20) +#define CONFIG_TRACE_EARLY +#define CONFIG_TRACE_EARLY_ADDR 0x01400000 #define CONFIG_BOOTSTAGE #define CONFIG_BOOTSTAGE_REPORT @@ -45,26 +40,6 @@ #define CONFIG_BOOTSTAGE_STASH_SIZE 0x7fc #define CONFIG_BOOTSTAGE_USER_COUNT 60 -#define CONFIG_LZO -#define CONFIG_FIT -#undef CONFIG_ZLIB -#undef CONFIG_GZIP -#define CONFIG_SYS_BOOTM_LEN (16 << 20) - -/*----------------------------------------------------------------------- - * Watchdog Configuration - */ -#undef CONFIG_WATCHDOG -#undef CONFIG_HW_WATCHDOG - -/* SATA AHCI storage */ - -#define CONFIG_SCSI_AHCI - -#ifdef CONFIG_SCSI_AHCI -#define CONFIG_LIBATA -#define CONFIG_SYS_64BIT_LBA -#define CONFIG_SATA_INTEL 1 #define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \ PCI_DEVICE_ID_INTEL_NM10_AHCI}, \ {PCI_VENDOR_ID_INTEL, \ @@ -74,249 +49,27 @@ {PCI_VENDOR_ID_INTEL, \ PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE} -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) -#endif - -/* Generic TPM interfaced through LPC bus */ -#define CONFIG_TPM -#define CONFIG_TPM_TIS_LPC -#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000 - -/*----------------------------------------------------------------------- - * Real Time Clock Configuration - */ -#define CONFIG_RTC_MC146818 -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0 -#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_BASE_ADDRESS - -/*----------------------------------------------------------------------- - * Serial Configuration - */ #define CONFIG_COREBOOT_SERIAL -#define CONFIG_SYS_NS16550 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, \ - 9600, 19200, 38400, 115200} -#define CONFIG_SYS_NS16550_PORT_MAPPED #define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \ "stdout=vga,serial,cbmem\0" \ "stderr=vga,serial,cbmem\0" -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_STDIO_DEREGISTER #define CONFIG_CBMEM_CONSOLE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_COMMAND_HISTORY -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER - -#define CONFIG_SUPPORT_VFAT -/************************************************************ - * ATAPI support (experimental) - ************************************************************/ -#define CONFIG_ATAPI - -/************************************************************ - * DISK Partition support - ************************************************************/ -#define CONFIG_EFI_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_MAC_PARTITION -#define CONFIG_ISO_PARTITION /* Experimental */ - -#define CONFIG_CMD_PART -#define CONFIG_CMD_CBFS -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE -#define CONFIG_PARTITION_UUIDS - -/*----------------------------------------------------------------------- - * Video Configuration - */ -#define CONFIG_VIDEO #define CONFIG_VIDEO_COREBOOT -#define CONFIG_VIDEO_SW_CURSOR -#define VIDEO_FB_16BPP_WORD_SWAP -#define CONFIG_I8042_KBD -#define CONFIG_CFB_CONSOLE -#define CONFIG_SYS_CONSOLE_INFO_QUIET -/* x86 GPIOs are accessed through a PCI device */ -#define CONFIG_INTEL_ICH6_GPIO - -/*----------------------------------------------------------------------- - * Command line configuration. - */ -#include <config_cmd_default.h> +#define CONFIG_NR_DRAM_BANKS 4 #define CONFIG_TRACE #define CONFIG_CMD_TRACE #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) -#define CONFIG_TRACE_EARLY_SIZE (8 << 20) -#define CONFIG_TRACE_EARLY -#define CONFIG_TRACE_EARLY_ADDR 0x01400000 - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ECHO -#undef CONFIG_CMD_FLASH -#define CONFIG_CMD_FPGA -#define CONFIG_CMD_FPGA_LOADMK -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#define CONFIG_CMD_IO -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_ITEST -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#define CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_SETGETDCR -#define CONFIG_CMD_SOURCE -#define CONFIG_CMD_TIME -#define CONFIG_CMD_GETTIME -#define CONFIG_CMD_XIMG -#define CONFIG_CMD_SCSI - -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 - -#define CONFIG_CMD_ZBOOT -#define CONFIG_CMD_ELF #define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS \ - "root=/dev/sdb3 init=/sbin/init rootwait ro" -#define CONFIG_BOOTCOMMAND \ - "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" - - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + \ - 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x01000000 -#define CONFIG_SYS_LOAD_ADDR 0x20000000 - -/*----------------------------------------------------------------------- - * SDRAM Configuration - */ -#define CONFIG_NR_DRAM_BANKS 4 - -/* CONFIG_SYS_SDRAM_DRCTMCTL Overrides the following*/ -#undef CONFIG_SYS_SDRAM_PRECHARGE_DELAY -#undef CONFIG_SYS_SDRAM_RAS_CAS_DELAY -#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T -#undef CONFIG_SYS_SDRAM_CAS_LATENCY_3T - -/*----------------------------------------------------------------------- - * CPU Features - */ - -#define CONFIG_SYS_X86_TSC_TIMER -#define CONFIG_SYS_PCAT_INTERRUPTS -#define CONFIG_SYS_PCAT_TIMER -#define CONFIG_SYS_NUM_IRQS 16 - -/*----------------------------------------------------------------------- - * Memory organization: - * 32kB Stack - * 16kB Cache-As-RAM @ 0x19200000 - * 256kB Monitor - * (128kB + Environment Sector Size) malloc pool - */ -#define CONFIG_SYS_STACK_SIZE (32 * 1024) -#define CONFIG_SYS_CAR_ADDR 0x19200000 -#define CONFIG_SYS_CAR_SIZE (16 * 1024) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_SYS_MALLOC_LEN (0x20000 + 128 * 1024) -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/*----------------------------------------------------------------------- - * FLASH configuration - */ -#define CONFIG_ICH_SPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_MACRONIX -#define CONFIG_SPI_FLASH_WINBOND -#define CONFIG_SPI_FLASH_GIGADEVICE -#define CONFIG_SYS_NO_FLASH -#define CONFIG_CMD_SF -#define CONFIG_CMD_SF_TEST -#define CONFIG_CMD_SPI -#define CONFIG_SPI - -/*----------------------------------------------------------------------- - * Environment configuration - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x01000 - -/*----------------------------------------------------------------------- - * PCI configuration - */ -#define CONFIG_PCI #define CONFIG_CROS_EC #define CONFIG_CROS_EC_LPC #define CONFIG_CMD_CROS_EC #define CONFIG_ARCH_EARLY_INIT_R -/*----------------------------------------------------------------------- - * USB configuration - */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_PCI -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_USB_STORAGE -#define CONFIG_USB_KEYBOARD -#define CONFIG_SYS_USB_EVENT_POLL - -#define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_ETHER_ASIX -#define CONFIG_USB_ETHER_SMSC95XX -#define CONFIG_TFTP_TSIZE -#define CONFIG_CMD_DHCP -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -#define CONFIG_CMD_USB - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_STD_DEVICES_SETTINGS - #endif /* __CONFIG_H */ diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index ce52101..8c7d97a 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -26,7 +26,6 @@ #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) -#define CONFIG_ARM920T #define CONFIG_AT91RM9200 #define CONFIG_CPUAT91 #define USE_920T_MMU diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 2717195..0bdcef7 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -21,7 +21,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_DA830_EVM -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA830 /* TI DA830 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 5f85755..e5f8afe 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -25,7 +25,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index c2e187e..16b901b 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ #define CONFIG_SOC_DM355 diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index 5188fdf..4eed722 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -14,7 +14,6 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ #define CONFIG_SOC_DM355 /* DM355 based board */ diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index c4fccfd..c50c059 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ #define CONFIG_SOC_DM365 diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index b1b18ad..2c5a837 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -15,7 +15,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU */ /* Clock rates detection */ #ifndef __ASSEMBLY__ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index 9b3d0fe..2467f70 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -41,7 +41,6 @@ /*===================*/ /* SoC Configuration */ /*===================*/ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SOC_DM644X diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 96c8fe2..2505465 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -19,7 +19,6 @@ /*===================*/ /* SoC Configuration */ /*===================*/ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SOC_DM644X diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 6e07cce..e773835 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_USE_NAND #define CONFIG_SYS_USE_DSPLINK /* don't power up the DSP. */ /* SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SOC_DM644X diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index cd23aaca..dae37cd 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -43,7 +43,6 @@ /*===================*/ /* SoC Configuration */ /*===================*/ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SOC_DM644X diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index af0d602..a9cfc10 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -35,6 +35,7 @@ /* new uImage format support */ #define CONFIG_FIT #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ +#define CONFIG_FIT_DISABLE_SHA256 #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ @@ -59,8 +60,14 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DTT +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_NFS /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 1d50a37..ae89368 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -28,7 +28,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 47a8420..a82e8bc 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -85,8 +85,7 @@ #endif /* High-level configuration options */ -#define CONFIG_ARM920T 1 /* This is an ARM920T core... */ -#define CONFIG_EP93XX 1 /* in a Cirrus Logic 93xx SoC */ +#define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */ #define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */ #undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 1df4fc1..70a698a 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -23,7 +23,6 @@ */ #define CONFIG_MARVELL 1 -#define CONFIG_ARM926EJS 1 /* Basic Architecture */ #define CONFIG_FEROCEON 1 /* CPU Core subversion */ #define CONFIG_88F5182 1 /* SOC Name */ #define CONFIG_MACH_EDMINIV2 1 /* Machine type */ diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 30ca95f..cdea4a8 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -25,7 +25,6 @@ /* * SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 8417567..bf02829 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -16,7 +16,6 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ #define CONFIG_MX35 #define CONFIG_SYS_DCACHE_OFF diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h index 8188c7b..1d78e72 100644 --- a/include/configs/hawkboard.h +++ b/include/configs/hawkboard.h @@ -20,7 +20,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_HAWK -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h new file mode 100644 index 0000000..e7df9ad --- /dev/null +++ b/include/configs/hrcon.h @@ -0,0 +1,614 @@ +/* + * (C) Copyright 2014 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_MPC83xx 1 /* MPC83xx family */ +#define CONFIG_MPC830x 1 /* MPC830x family */ +#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ +#define CONFIG_HRCON 1 /* HRCON board specific */ + +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + +#define CONFIG_IDENT_STRING " hrcon 0.01" + +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_LAST_STAGE_INIT + +/* new uImage format support */ +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 + +#define CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 + +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 + +#define CONFIG_CMD_FPGAD +#define CONFIG_CMD_IOLOOP + +/* + * System Clock Setup + */ +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN + +/* + * Hardware Reset Configuration Word + * if CLKIN is 66.66MHz, then + * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz + * We choose the A type silicon as default, so the core is 400Mhz. + */ +#define CONFIG_SYS_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_SVCOD_DIV_2 |\ + HRCWL_CSB_TO_CLKIN_4X1 |\ + HRCWL_CORE_TO_CSB_3X1) +/* + * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits + * in 8308's HRCWH according to the manual, but original Freescale's + * code has them and I've expirienced some problems using the board + * with BDI3000 attached when I've tried to set these bits to zero + * (UART doesn't work after the 'reset run' command). + */ +#define CONFIG_SYS_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN) + +/* + * System IO Config + */ +#define CONFIG_SYS_SICRH (\ + SICRH_ESDHC_A_SD |\ + SICRH_ESDHC_B_SD |\ + SICRH_ESDHC_C_SD |\ + SICRH_GPIO_A_GPIO |\ + SICRH_GPIO_B_GPIO |\ + SICRH_IEEE1588_A_GPIO |\ + SICRH_USB |\ + SICRH_GTM_GPIO |\ + SICRH_IEEE1588_B_GPIO |\ + SICRH_ETSEC2_GPIO |\ + SICRH_GPIOSEL_1 |\ + SICRH_TMROBI_V3P3 |\ + SICRH_TSOBI1_V2P5 |\ + SICRH_TSOBI2_V2P5) /* 0x0037f103 */ +#define CONFIG_SYS_SICRL (\ + SICRL_SPI_PF0 |\ + SICRL_UART_PF0 |\ + SICRL_IRQ_PF0 |\ + SICRL_I2C2_PF0 |\ + SICRL_ETSEC1_GTX_CLK125) /* 0x00000000 */ + +/* + * IMMR new address + */ +#define CONFIG_SYS_IMMR 0xE0000000 + +/* + * SERDES + */ +#define CONFIG_FSL_SERDES +#define CONFIG_FSL_SERDES1 0xe3000 + +/* + * Arbiter Setup + */ +#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ +#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ +#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */ + +/* + * DDR Setup + */ +#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 +#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ + | DDRCDR_PZ_LOZ \ + | DDRCDR_NZ_LOZ \ + | DDRCDR_ODT \ + | DDRCDR_Q_DRN) + /* 0x7b880001 */ +/* + * Manually set up DDR parameters + * consist of one chip NT5TU64M16HG from NANYA + */ + +#define CONFIG_SYS_DDR_SIZE 128 /* MB */ + +#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ + | CSCONFIG_ODT_RD_NEVER \ + | CSCONFIG_ODT_WR_ONLY_CURRENT \ + | CSCONFIG_BANK_BIT_3 \ + | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) + /* 0x80010102 */ +#define CONFIG_SYS_DDR_TIMING_3 0 +#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ + | (0 << TIMING_CFG0_WRT_SHIFT) \ + | (0 << TIMING_CFG0_RRT_SHIFT) \ + | (0 << TIMING_CFG0_WWT_SHIFT) \ + | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ + | (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ + | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ + | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) + /* 0x00260802 */ +#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \ + | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \ + | (2 << TIMING_CFG1_ACTTORW_SHIFT) \ + | (7 << TIMING_CFG1_CASLAT_SHIFT) \ + | (9 << TIMING_CFG1_REFREC_SHIFT) \ + | (2 << TIMING_CFG1_WRREC_SHIFT) \ + | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ + | (2 << TIMING_CFG1_WRTORD_SHIFT)) + /* 0x26279222 */ +#define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \ + | (4 << TIMING_CFG2_CPO_SHIFT) \ + | (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ + | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ + | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ + | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ + | (5 << TIMING_CFG2_FOUR_ACT_SHIFT)) + /* 0x021848c5 */ +#define CONFIG_SYS_DDR_INTERVAL ((0x0824 << SDRAM_INTERVAL_REFINT_SHIFT) \ + | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) + /* 0x08240100 */ +#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ + | SDRAM_CFG_DBW_16) + /* 0x43100000 */ + +#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */ +#define CONFIG_SYS_DDR_MODE ((0x0440 << SDRAM_MODE_ESD_SHIFT) \ + | (0x0242 << SDRAM_MODE_SD_SHIFT)) + /* ODT 150ohm CL=4, AL=0 on SDRAM */ +#define CONFIG_SYS_DDR_MODE2 0x00000000 + +/* + * Memory test + */ +#define CONFIG_SYS_MEMTEST_START 0x00001000 /* memtest region */ +#define CONFIG_SYS_MEMTEST_END 0x07f00000 + +/* + * The reserved memory + */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ + +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 +#define CONFIG_SYS_LBC_LBCR 0x00040000 + +/* + * FLASH on the Local Bus + */ +#if 1 +#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ +#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_FLASH_CFI_LEGACY +#define CONFIG_SYS_FLASH_LEGACY_512Kx16 +#else +#define CONFIG_SYS_NO_FLASH +#endif + +#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ + +/* Window base at flash base */ +#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) + +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_UPM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET) + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 135 + +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +/* + * FPGA + */ +#define CONFIG_SYS_FPGA0_BASE 0xE0600000 +#define CONFIG_SYS_FPGA0_SIZE 1 /* FPGA size is 1M */ + +/* Window base at FPGA base */ +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA0_BASE +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_1MB) + +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA0_BASE \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_FPGA0_SIZE) \ + | OR_UPM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET) + +#define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE +#define CONFIG_SYS_FPGA_DONE(k) 0x0010 + +#define CONFIG_SYS_FPGA_COUNT 1 + +#define CONFIG_SYS_MCLINK_MAX 3 + +#define CONFIG_SYS_FPGA_PTR \ + { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, NULL, NULL, NULL } + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 2 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER + +/* Pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 + +#define CONFIG_PCA953X /* NXP PCA9554 */ +#define CONFIG_PCA9698 /* NXP PCA9698 */ + +#define CONFIG_SYS_I2C_IHS +#define CONFIG_SYS_I2C_IHS_CH0 +#define CONFIG_SYS_I2C_IHS_SPEED_0 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_IHS_CH1 +#define CONFIG_SYS_I2C_IHS_SPEED_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH2 +#define CONFIG_SYS_I2C_IHS_SPEED_2 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_2 0x7F +#define CONFIG_SYS_I2C_IHS_CH3 +#define CONFIG_SYS_I2C_IHS_SPEED_3 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F + +/* + * Software (bit-bang) I2C driver configuration + */ +#define CONFIG_SYS_I2C_SOFT +#define CONFIG_SYS_I2C_SOFT_SPEED 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F +#define I2C_SOFT_DECLARATIONS2 +#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x7F +#define I2C_SOFT_DECLARATIONS3 +#define CONFIG_SYS_I2C_SOFT_SPEED_3 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_3 0x7F +#define I2C_SOFT_DECLARATIONS4 +#define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F + +#define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8} +#define CONFIG_SYS_CH7301_I2C {5, 6, 7, 8} +#define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} + +#ifndef __ASSEMBLY__ +void fpga_gpio_set(unsigned int bus, int pin); +void fpga_gpio_clear(unsigned int bus, int pin); +int fpga_gpio_get(unsigned int bus, int pin); +#endif + +#define I2C_ACTIVE { } +#define I2C_TRISTATE { } +#define I2C_READ \ + (fpga_gpio_get(I2C_ADAP_HWNR, 0x0040) ? 1 : 0) +#define I2C_SDA(bit) \ + do { \ + if (bit) \ + fpga_gpio_set(I2C_ADAP_HWNR, 0x0040); \ + else \ + fpga_gpio_clear(I2C_ADAP_HWNR, 0x0040); \ + } while (0) +#define I2C_SCL(bit) \ + do { \ + if (bit) \ + fpga_gpio_set(I2C_ADAP_HWNR, 0x0020); \ + else \ + fpga_gpio_clear(I2C_ADAP_HWNR, 0x0020); \ + } while (0) +#define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */ + +/* + * Software (bit-bang) MII driver configuration + */ +#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ +#define CONFIG_BITBANGMII_MULTI + +/* + * OSD Setup + */ +#define CONFIG_SYS_OSD_SCREENS 1 +#define CONFIG_SYS_DP501_DIFFERENTIAL +#define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CONFIG_SYS_PCIE1_BASE 0xA0000000 +#define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000 +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 +#define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000 +#define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000 +#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 + +/* enable PCIE clock */ +#define CONFIG_SYS_SCCR_PCIEXP1CM 1 + +#define CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_PCIE + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ +#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1 + +/* + * TSEC + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) + +/* + * TSEC ethernet configuration + */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_TSEC1 +#define CONFIG_TSEC1_NAME "eTSEC0" +#define TSEC1_PHY_ADDR 1 +#define TSEC1_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT + +/* Options are: eTSEC[0-1] */ +#define CONFIG_ETHPRIME "eTSEC0" + +/* + * Environment + */ +#if 1 +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#else +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ + +#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */ +#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ +#define CONFIG_AUTOBOOT_STOP_STR " " + +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * For booting Linux, the board info and command line data + * have to be in the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CONFIG_SYS_HID0_INIT 0x000000000 +#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_INSTRUCTION_CACHE | \ + HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) +#define CONFIG_SYS_HID2 HID2_HBE + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U + +/* IMMRBAR, PCI IO and FPGA: cache-inhibit and guarded */ +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_RW | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \ + BATU_VP) +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ + BATL_CACHEINHIBIT | \ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U + +/* + * Environment Configuration + */ + +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ + +#define CONFIG_HOSTNAME hrcon +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" + +#define CONFIG_PREBOOT /* enable preboot variable */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS1\0" \ + "u-boot=u-boot.bin\0" \ + "kernel_addr=1000000\0" \ + "fdt_addr=C00000\0" \ + "fdtfile=hrcon.dtb\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\ + " +${filesize};cp.b ${fileaddr} " \ + __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ + "upd=run load update\0" \ + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp ${kernel_addr} $bootfile;" \ + "tftp ${fdt_addr} $fdtfile;" \ + "bootm ${kernel_addr} - ${fdt_addr}" + +#define CONFIG_MMCBOOTCOMMAND \ + "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "ext2load mmc 0:2 ${kernel_addr} $bootfile;" \ + "ext2load mmc 0:2 ${fdt_addr} $fdtfile;" \ + "bootm ${kernel_addr} - ${fdt_addr}" + +#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND + + +#endif /* __CONFIG_H */ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 3e55247..f084834 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -484,7 +484,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + sizeof(CONFIG_SYS_PROMPT)+16) diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 9c25efe..386dbd8 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -13,7 +13,6 @@ /* * SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_MX27 #define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 8428d84..0f22032 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -15,8 +15,7 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_MX31 1 /* This is a mx31 */ #define CONFIG_MX31_CLK32 32000 #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index ffb67c2..4195fa3 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -15,8 +15,7 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 /* in a mx31 */ +#define CONFIG_MX31 /* This is a mx31 */ #define CONFIG_MX31_CLK32 32000 #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 98e819b..310d5e2 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -25,7 +25,6 @@ * SoC Configuration */ #define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ #define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index 759e112..8175621 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -14,7 +14,6 @@ #define CONFIG_MB86R0x_IOCLK get_bus_freq(0) #define CONFIG_SYS_TEXT_BASE 0x10000000 -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ #define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index dd5050f..42280ca 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_THUMB_BUILD /* SoC Configuration */ -#define CONFIG_ARMV7 #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_TEXT_BASE 0x0c001000 diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index d1f6ea7..b19a60f 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -344,7 +344,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 3c73af8..e98e102 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -245,7 +245,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 51b1a14..0f4bd91 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -12,8 +12,7 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_MX31 1 /* This is a mx31 */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index bc4583b..2a3e53c 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -17,8 +17,7 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 /* in a mx31 */ +#define CONFIG_MX31 /* This is a mx31 */ #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index ab48144..a145f08 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -16,7 +16,6 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ #define CONFIG_MX35 #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 5419f55..52cde41 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -12,7 +12,6 @@ #include <nomadik.h> -#define CONFIG_ARM926EJS #define CONFIG_NOMADIK_8815 /* cpu variant */ #define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */ diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index f3c21c4..bf1d34d 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -18,7 +18,6 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */ #define CONFIG_MACH_TYPE MACH_TYPE_MVBLX diff --git a/include/configs/pr1.h b/include/configs/pr1.h index 0f57e86..13fb675 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -102,8 +102,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C -#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/qong.h b/include/configs/qong.h index f9d6642..d383fe8 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -12,8 +12,7 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 /* in a mx31 */ +#define CONFIG_MX31 /* This is a mx31 */ #define CONFIG_QONG #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h index ca27f9a..41e975f 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi_b.h @@ -21,7 +21,6 @@ /* Architecture, CPU, etc.*/ #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_ARM1176 #define CONFIG_BCM2835 #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_DCACHE_OFF diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index ee4b244..2b03841 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -48,6 +48,7 @@ #define CONFIG_ANDROID_BOOT_IMAGE #define CONFIG_FS_FAT +#define CONFIG_FAT_WRITE #define CONFIG_FS_EXT4 #define CONFIG_EXT4_WRITE #define CONFIG_CMD_FAT @@ -57,6 +58,7 @@ #define CONFIG_DOS_PARTITION #define CONFIG_HOST_MAX_DEVICES 4 #define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_MD5SUM #define CONFIG_SYS_VSNPRINTF diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index e6d272d..f4a40bb 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -10,8 +10,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */ -#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */ +#define CONFIG_IMX 1 /* This is a Motorola MC9328MXL Chip */ #define CONFIG_SCB9328 1 /* on a scb9328tronix board */ #define CONFIG_IMX_SERIAL diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index d4ae19f..b83c15f 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -17,8 +17,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T /* This is an ARM920T Core */ -#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C24X0 /* This is a SAMSUNG S3C24x0-type SoC */ #define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */ #define CONFIG_SMDK2410 /* on a SAMSUNG SMDK2410 Board */ diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 1ebee71..942af2e 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -15,11 +15,17 @@ #include <asm/hardware.h> #include <linux/sizes.h> -#define CONFIG_SYS_TEXT_BASE 0x20000000 +#define CONFIG_SYS_TEXT_BASE 0x21f00000 /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DM +#define CONFIG_CMD_DM +#define CONFIG_DM_GPIO +#define CONFIG_DM_SERIAL +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* CPU */ #define CONFIG_ARCH_CPU_INIT @@ -84,8 +90,10 @@ /* UARTs/Serial console */ #define CONFIG_ATMEL_USART +#ifndef CONFIG_DM_SERIAL #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS +#endif #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_PROMPT "Snapper> " @@ -159,7 +167,7 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_FAT #define CONFIG_CMD_I2C -#undef CONFIG_CMD_GPIO +#define CONFIG_CMD_GPIO #define CONFIG_CMD_USB #define CONFIG_CMD_MII #define CONFIG_CMD_NAND diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index c436fda..c4ac94d 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -11,7 +11,6 @@ /* Virtual target or real hardware */ #undef CONFIG_SOCFPGA_VIRTUAL_TARGET -#define CONFIG_ARMV7 #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SOCFPGA diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index d687717..a160329 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -16,7 +16,6 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP_GPIO diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index 6673026..e96a742 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -103,8 +103,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 9998343..42129fb 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -122,8 +122,8 @@ /* * I2C Settings */ -#define CONFIG_BFIN_TWI_I2C 1 -#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_ADI /* diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 5d2b12a..d690045 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -118,7 +118,9 @@ #define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) +#ifndef CONFIG_SPL_BUILD #define CONFIG_USE_ARCH_MEMCPY +#endif /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h index 162826f..00a1a9e 100644 --- a/include/configs/tnetv107x_evm.h +++ b/include/configs/tnetv107x_evm.h @@ -16,7 +16,6 @@ #include <asm/arch/clock.h> /* Architecture, CPU, etc */ -#define CONFIG_ARM1176 #define CONFIG_TNETV107X #define CONFIG_TNETV107X_EVM #define CONFIG_TNETV107X_WATCHDOG diff --git a/include/configs/tt01.h b/include/configs/tt01.h index 0937653..cf169a4 100644 --- a/include/configs/tt01.h +++ b/include/configs/tt01.h @@ -13,7 +13,6 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 #define CONFIG_MX31 #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/udoo.h b/include/configs/udoo.h index 700e9c1..b4a6245 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -191,7 +191,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 29c32fe..900b89c 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -19,8 +19,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ -#define CONFIG_VERSATILE 1 /* in Versatile Platform Board */ +#define CONFIG_VERSATILE 1 /* This is Versatile Platform Board */ #define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */ #define CONFIG_SYS_MEMTEST_START 0x100000 diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index d3d3e69..c7a17f7 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -14,7 +14,6 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ #define CONFIG_MX35 #define CONFIG_MX35_HCLK_FREQ 24000000 diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h new file mode 100644 index 0000000..f16ae32 --- /dev/null +++ b/include/configs/x86-common.h @@ -0,0 +1,251 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * (C) Copyright 2008 + * Graeme Russ, graeme.russ@gmail.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/ibmpc.h> + +#ifndef __CONFIG_X86_COMMON_H +#define __CONFIG_X86_COMMON_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_SHOW_BOOT_PROGRESS +#define CONFIG_SYS_VSNPRINTF +#define CONFIG_ZBOOT_32 +#define CONFIG_PHYSMEM +#define CONFIG_DISPLAY_BOARDINFO_LATE +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_DM +#define CONFIG_CMD_DM +#define CONFIG_DM_GPIO +#define CONFIG_DM_SERIAL + +#define CONFIG_LMB +#define CONFIG_OF_LIBFDT + +#define CONFIG_LZO +#define CONFIG_FIT +#undef CONFIG_ZLIB +#undef CONFIG_GZIP +#define CONFIG_SYS_BOOTM_LEN (16 << 20) + +/* SATA AHCI storage */ + +#define CONFIG_SCSI_AHCI +#define CONFIG_SATA_INTEL +#ifdef CONFIG_SCSI_AHCI +#define CONFIG_LIBATA +#define CONFIG_SYS_64BIT_LBA + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#endif + +/* Generic TPM interfaced through LPC bus */ +#define CONFIG_TPM +#define CONFIG_TPM_TIS_LPC +#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000 + +/*----------------------------------------------------------------------- + * Real Time Clock Configuration + */ +#define CONFIG_RTC_MC146818 +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0 +#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_BASE_ADDRESS + +/*----------------------------------------------------------------------- + * Serial Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, \ + 9600, 19200, 38400, 115200} +#define CONFIG_SYS_NS16550_PORT_MAPPED + +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_STDIO_DEREGISTER + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_COMMAND_HISTORY +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +#define CONFIG_SUPPORT_VFAT +/************************************************************ + * ATAPI support (experimental) + ************************************************************/ +#define CONFIG_ATAPI + +/************************************************************ + * DISK Partition support + ************************************************************/ +#define CONFIG_EFI_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_ISO_PARTITION /* Experimental */ + +#define CONFIG_CMD_PART +#define CONFIG_CMD_CBFS +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_PARTITION_UUIDS + +#define CONFIG_SYS_CONSOLE_INFO_QUIET + +/* x86 GPIOs are accessed through a PCI device */ +#define CONFIG_INTEL_ICH6_GPIO + +/*----------------------------------------------------------------------- + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ECHO +#undef CONFIG_CMD_FLASH +#define CONFIG_CMD_FPGA +#define CONFIG_CMD_FPGA_LOADMK +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_IMI +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_IO +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ITEST +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_SETGETDCR +#define CONFIG_CMD_SOURCE +#define CONFIG_CMD_TIME +#define CONFIG_CMD_GETTIME +#define CONFIG_CMD_XIMG +#define CONFIG_CMD_SCSI + +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + +#define CONFIG_CMD_ZBOOT +#define CONFIG_CMD_ELF + +#define CONFIG_BOOTARGS \ + "root=/dev/sdb3 init=/sbin/init rootwait ro" +#define CONFIG_BOOTCOMMAND \ + "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_CBSIZE 512 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + \ + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START 0x00100000 +#define CONFIG_SYS_MEMTEST_END 0x01000000 +#define CONFIG_SYS_LOAD_ADDR 0x20000000 + +/*----------------------------------------------------------------------- + * Video Configuration + */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_SW_CURSOR +#define VIDEO_FB_16BPP_WORD_SWAP +#define CONFIG_I8042_KBD +#define CONFIG_CFB_CONSOLE + +/*----------------------------------------------------------------------- + * CPU Features + */ + +#define CONFIG_SYS_X86_TSC_TIMER +#define CONFIG_SYS_PCAT_INTERRUPTS +#define CONFIG_SYS_PCAT_TIMER +#define CONFIG_SYS_NUM_IRQS 16 + +#define CONFIG_SYS_STACK_SIZE (32 * 1024) +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MALLOC_LEN 0x200000 +#define CONFIG_SYS_MALLOC_F_LEN (2 << 10) + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/*----------------------------------------------------------------------- + * FLASH configuration + */ +#define CONFIG_ICH_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_MACRONIX +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SPI_FLASH_GIGADEVICE +#define CONFIG_SYS_NO_FLASH +#define CONFIG_CMD_SF +#define CONFIG_CMD_SF_TEST +#define CONFIG_CMD_SPI +#define CONFIG_SPI + +/*----------------------------------------------------------------------- + * Environment configuration + */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x01000 + +/*----------------------------------------------------------------------- + * PCI configuration + */ +#define CONFIG_PCI + +/*----------------------------------------------------------------------- + * USB configuration + */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_PCI +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL + +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_TFTP_TSIZE +#define CONFIG_CMD_DHCP +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +#define CONFIG_CMD_USB + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_STD_DEVICES_SETTINGS + +#endif /* __CONFIG_H */ diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 8ffe6f1..356ac88 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -12,7 +12,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_MX25 #define CONFIG_SYS_TEXT_BASE 0xA0000000 diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 2bc1562..c39c568 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -10,9 +10,6 @@ #ifndef __CONFIG_ZYNQ_COMMON_H #define __CONFIG_ZYNQ_COMMON_H -/* High Level configuration Options */ -#define CONFIG_ARMV7 - /* CPU clock */ #ifndef CONFIG_CPU_FREQ_HZ # define CONFIG_CPU_FREQ_HZ 800000000 diff --git a/include/dm/device-internal.h b/include/dm/device-internal.h index 44cb7ef..f0cc794 100644 --- a/include/dm/device-internal.h +++ b/include/dm/device-internal.h @@ -87,7 +87,11 @@ int device_probe_child(struct udevice *dev, void *parent_priv); * @dev: Pointer to device to remove * @return 0 if OK, -ve on error (an error here is normally a very bad thing) */ +#ifdef CONFIG_DM_DEVICE_REMOVE int device_remove(struct udevice *dev); +#else +static inline int device_remove(struct udevice *dev) { return 0; } +#endif /** * device_unbind() - Unbind a device, destroying it @@ -99,6 +103,12 @@ int device_remove(struct udevice *dev); */ int device_unbind(struct udevice *dev); +#ifdef CONFIG_DM_DEVICE_REMOVE +void device_free(struct udevice *dev); +#else +static inline void device_free(struct udevice *dev) {} +#endif + /* Cast away any volatile pointer */ #define DM_ROOT_NON_CONST (((gd_t *)gd)->dm_root) #define DM_UCLASS_ROOT_NON_CONST (((gd_t *)gd)->uclass_root) diff --git a/include/dm/device.h b/include/dm/device.h index 9ce95a8..13598a1 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -47,6 +47,7 @@ struct driver_info; * @name: Name of device, typically the FDT node name * @platdata: Configuration data for this device * @of_offset: Device tree node offset for this device (- for none) + * @of_id: Pointer to the udevice_id structure which created the device * @parent: Parent of this device, or NULL for the top level device * @priv: Private data for this device * @uclass: Pointer to uclass for this device @@ -65,6 +66,7 @@ struct udevice { const char *name; void *platdata; int of_offset; + const struct udevice_id *of_id; struct udevice *parent; void *priv; struct uclass *uclass; @@ -206,6 +208,23 @@ void *dev_get_parentdata(struct udevice *dev); void *dev_get_priv(struct udevice *dev); /** + * struct dev_get_parent() - Get the parent of a device + * + * @child: Child to check + * @return parent of child, or NULL if this is the root device + */ +struct udevice *dev_get_parent(struct udevice *child); + +/** + * dev_get_of_data() - get the device tree data used to bind a device + * + * When a device is bound using a device tree node, it matches a + * particular compatible string as in struct udevice_id. This function + * returns the associated data value for that compatible string + */ +ulong dev_get_of_data(struct udevice *dev); + +/** * device_get_child() - Get the child of a device by index * * Returns the numbered child, 0 being the first. This does not use diff --git a/include/dm/lists.h b/include/dm/lists.h index 704e33e..1b50af9 100644 --- a/include/dm/lists.h +++ b/include/dm/lists.h @@ -60,4 +60,17 @@ int lists_bind_drivers(struct udevice *parent, bool pre_reloc_only); int lists_bind_fdt(struct udevice *parent, const void *blob, int offset, struct udevice **devp); +/** + * device_bind_driver() - bind a device to a driver + * + * This binds a new device to a driver. + * + * @parent: Parent device + * @drv_name: Name of driver to attach to this parent + * @dev_name: Name of the new device thus created + * @devp: Returns the newly bound device + */ +int device_bind_driver(struct udevice *parent, const char *drv_name, + const char *dev_name, struct udevice **devp); + #endif diff --git a/include/dm/util.h b/include/dm/util.h index 6ac3a38..0cec17b 100644 --- a/include/dm/util.h +++ b/include/dm/util.h @@ -7,7 +7,13 @@ #ifndef __DM_UTIL_H #define __DM_UTIL_H +#ifdef CONFIG_DM_WARN void dm_warn(const char *fmt, ...); +#else +static inline void dm_warn(const char *fmt, ...) +{ +} +#endif #ifdef DEBUG void dm_dbg(const char *fmt, ...); diff --git a/include/ext4fs.h b/include/ext4fs.h index 6c419f3..6888adc 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -125,24 +125,28 @@ int ext4fs_init(void); void ext4fs_deinit(void); int ext4fs_filename_check(char *filename); int ext4fs_write(const char *fname, unsigned char *buffer, - unsigned long sizebytes); + unsigned long sizebytes); +int ext4_write_file(const char *filename, void *buf, loff_t offset, loff_t len, + loff_t *actwrite); #endif struct ext_filesystem *get_fs(void); -int ext4fs_open(const char *filename); -int ext4fs_read(char *buf, unsigned len); +int ext4fs_open(const char *filename, loff_t *len); +int ext4fs_read(char *buf, loff_t len, loff_t *actread); int ext4fs_mount(unsigned part_length); void ext4fs_close(void); void ext4fs_reinit_global(void); int ext4fs_ls(const char *dirname); int ext4fs_exists(const char *filename); -int ext4fs_size(const char *filename); +int ext4fs_size(const char *filename, loff_t *size); void ext4fs_free_node(struct ext2fs_node *node, struct ext2fs_node *currroot); int ext4fs_devread(lbaint_t sector, int byte_offset, int byte_len, char *buf); void ext4fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info); long int read_allocated_block(struct ext2_inode *inode, int fileblock); int ext4fs_probe(block_dev_desc_t *fs_dev_desc, disk_partition_t *fs_partition); -int ext4_read_file(const char *filename, void *buf, int offset, int len); +int ext4_read_file(const char *filename, void *buf, loff_t offset, loff_t len, + loff_t *actread); int ext4_read_superblock(char *buffer); +int ext4fs_uuid(char *uuid_str); #endif diff --git a/include/fat.h b/include/fat.h index 20ca3f3..3038bd7 100644 --- a/include/fat.h +++ b/include/fat.h @@ -178,8 +178,8 @@ typedef struct { typedef int (file_detectfs_func)(void); typedef int (file_ls_func)(const char *dir); -typedef long (file_read_func)(const char *filename, void *buffer, - unsigned long maxsize); +typedef int (file_read_func)(const char *filename, void *buffer, + int maxsize); struct filesystem { file_detectfs_func *detect; @@ -198,15 +198,17 @@ int file_cd(const char *path); int file_fat_detectfs(void); int file_fat_ls(const char *dir); int fat_exists(const char *filename); -int fat_size(const char *filename); -long file_fat_read_at(const char *filename, unsigned long pos, void *buffer, - unsigned long maxsize); -long file_fat_read(const char *filename, void *buffer, unsigned long maxsize); +int fat_size(const char *filename, loff_t *size); +int file_fat_read_at(const char *filename, loff_t pos, void *buffer, + loff_t maxsize, loff_t *actread); +int file_fat_read(const char *filename, void *buffer, int maxsize); const char *file_getfsname(int idx); int fat_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info); int fat_register_device(block_dev_desc_t *dev_desc, int part_no); -int file_fat_write(const char *filename, void *buffer, unsigned long maxsize); -int fat_read_file(const char *filename, void *buf, int offset, int len); +int file_fat_write(const char *filename, void *buf, loff_t offset, loff_t len, + loff_t *actwrite); +int fat_read_file(const char *filename, void *buf, loff_t offset, loff_t len, + loff_t *actread); void fat_close(void); #endif /* _FAT_H_ */ diff --git a/include/fdtdec.h b/include/fdtdec.h index 4ae77be..abfd678 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -118,6 +118,8 @@ enum fdt_compat_id { COMPAT_SAMSUNG_EXYNOS_SYSMMU, /* Exynos sysmmu */ COMPAT_PARADE_PS8625, /* Parade PS8622 EDP->LVDS bridge */ COMPAT_INTEL_LPC, /* Intel Low Pin Count I/F */ + COMPAT_INTEL_MICROCODE, /* Intel microcode update */ + COMPAT_MEMORY_SPD, /* Memory SPD information */ COMPAT_COUNT, }; @@ -445,6 +447,22 @@ int fdtdec_get_int_array(const void *blob, int node, const char *prop_name, u32 *array, int count); /** + * Look up a property in a node and return its contents in an integer + * array of given length. The property must exist but may have less data that + * expected (4*count bytes). It may have more, but this will be ignored. + * + * @param blob FDT blob + * @param node node to examine + * @param prop_name name of property to find + * @param array array to fill with data + * @param count number of array elements + * @return number of array elements if ok, or -FDT_ERR_NOTFOUND if the + * property is not found + */ +int fdtdec_get_int_array_count(const void *blob, int node, + const char *prop_name, u32 *array, int count); + +/** * Look up a property in a node and return a pointer to its contents as a * unsigned int array of given length. The property must have at least enough * data for the array ('count' cells). It may have more, but this will be diff --git a/include/flash.h b/include/flash.h index 5454c9e..30aa080 100644 --- a/include/flash.h +++ b/include/flash.h @@ -158,6 +158,7 @@ extern flash_info_t *flash_get_info(ulong base); #define EXCEL_MANUFACT 0x004A004A /* Excel Semiconductor */ #define AMIC_MANUFACT 0x00370037 /* AMIC manuf. ID in D23..D16, D7..D0 */ #define WINB_MANUFACT 0x00DA00DA /* Winbond manuf. ID in D23..D16, D7..D0 */ +#define EON_ALT_MANU 0x001C001C /* EON manuf. ID in D23..D16, D7..D0 */ /* Manufacturers inside bank 1 have ids like 0x01xx01xx */ #define EON_MANUFACT 0x011C011C /* EON manuf. ID in D23..D16, D7..D0 */ diff --git a/include/fs.h b/include/fs.h index 06a45f2..ffb6ce7 100644 --- a/include/fs.h +++ b/include/fs.h @@ -51,32 +51,41 @@ int fs_ls(const char *dirname); int fs_exists(const char *filename); /* - * Determine a file's size + * fs_size - Determine a file's size * - * Returns the file's size in bytes, or a negative value if it doesn't exist. + * @filename: Name of the file + * @size: Size of file + * @return 0 if ok with valid *size, negative on error */ -int fs_size(const char *filename); +int fs_size(const char *filename, loff_t *size); /* - * Read file "filename" from the partition previously set by fs_set_blk_dev(), - * to address "addr", starting at byte offset "offset", and reading "len" - * bytes. "offset" may be 0 to read from the start of the file. "len" may be - * 0 to read the entire file. Note that not all filesystem types support - * either/both offset!=0 or len!=0. + * fs_read - Read file from the partition previously set by fs_set_blk_dev() + * Note that not all filesystem types support either/both offset!=0 or len!=0. * - * Returns number of bytes read on success. Returns <= 0 on error. + * @filename: Name of file to read from + * @addr: The address to read into + * @offset: The offset in file to read from + * @len: The number of bytes to read. Maybe 0 to read entire file + * @actread: Returns the actual number of bytes read + * @return 0 if ok with valid *actread, -1 on error conditions */ -int fs_read(const char *filename, ulong addr, int offset, int len); +int fs_read(const char *filename, ulong addr, loff_t offset, loff_t len, + loff_t *actread); /* - * Write file "filename" to the partition previously set by fs_set_blk_dev(), - * from address "addr", starting at byte offset "offset", and writing "len" - * bytes. "offset" may be 0 to write to the start of the file. Note that not - * all filesystem types support offset!=0. + * fs_write - Write file to the partition previously set by fs_set_blk_dev() + * Note that not all filesystem types support offset!=0. * - * Returns number of bytes read on success. Returns <= 0 on error. + * @filename: Name of file to read from + * @addr: The address to read into + * @offset: The offset in file to read from. Maybe 0 to write to start of file + * @len: The number of bytes to write + * @actwrite: Returns the actual number of bytes written + * @return 0 if ok with valid *actwrite, -1 on error conditions */ -int fs_write(const char *filename, ulong addr, int offset, int len); +int fs_write(const char *filename, ulong addr, loff_t offset, loff_t len, + loff_t *actwrite); /* * Common implementation for various filesystem commands, optionally limited @@ -93,4 +102,11 @@ int file_exists(const char *dev_type, const char *dev_part, const char *file, int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], int fstype); +/* + * Determine the UUID of the specified filesystem and print it. Optionally it is + * possible to store the UUID directly in env. + */ +int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], + int fstype); + #endif /* _FS_H */ diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index 276a01e..8a5efe7 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -61,6 +61,22 @@ struct ihs_osd { u16 y_pos; }; +struct ihs_mdio { + u16 control; + u16 address_data; + u16 rx_data; +}; + +struct ihs_io_ep { + u16 transmit_data; + u16 rx_tx_control; + u16 receive_data; + u16 rx_tx_status; + u16 reserved; + u16 device_address; + u16 target_address; +}; + #ifdef CONFIG_NEO struct ihs_fpga { u16 reflection_low; /* 0x0000 */ @@ -119,12 +135,50 @@ struct ihs_fpga { u16 versions; /* 0x0002 */ u16 fpga_version; /* 0x0004 */ u16 fpga_features; /* 0x0006 */ - u16 reserved_0[6]; /* 0x0008 */ + u16 reserved_0[1]; /* 0x0008 */ + u16 top_interrupt; /* 0x000a */ + u16 reserved_1[4]; /* 0x000c */ + struct ihs_gpio gpio; /* 0x0014 */ + u16 mpc3w_control; /* 0x001a */ + u16 reserved_2[2]; /* 0x001c */ + struct ihs_io_ep ep; /* 0x0020 */ + u16 reserved_3[9]; /* 0x002e */ + struct ihs_i2c i2c; /* 0x0040 */ + u16 reserved_4[10]; /* 0x004c */ + u16 mc_int; /* 0x0060 */ + u16 mc_int_en; /* 0x0062 */ + u16 mc_status; /* 0x0064 */ + u16 mc_control; /* 0x0066 */ + u16 mc_tx_data; /* 0x0068 */ + u16 mc_tx_address; /* 0x006a */ + u16 mc_tx_cmd; /* 0x006c */ + u16 mc_res; /* 0x006e */ + u16 mc_rx_cmd_status; /* 0x0070 */ + u16 mc_rx_data; /* 0x0072 */ + u16 reserved_5[69]; /* 0x0074 */ + u16 reflection_high; /* 0x00fe */ + struct ihs_osd osd; /* 0x0100 */ + u16 reserved_6[889]; /* 0x010e */ + u16 videomem[31736]; /* 0x0800 */ +}; +#endif + +#ifdef CONFIG_HRCON +struct ihs_fpga { + u16 reflection_low; /* 0x0000 */ + u16 versions; /* 0x0002 */ + u16 fpga_version; /* 0x0004 */ + u16 fpga_features; /* 0x0006 */ + u16 reserved_0[1]; /* 0x0008 */ + u16 top_interrupt; /* 0x000a */ + u16 reserved_1[4]; /* 0x000c */ struct ihs_gpio gpio; /* 0x0014 */ u16 mpc3w_control; /* 0x001a */ - u16 reserved_1[18]; /* 0x001c */ + u16 reserved_2[2]; /* 0x001c */ + struct ihs_io_ep ep; /* 0x0020 */ + u16 reserved_3[9]; /* 0x002e */ struct ihs_i2c i2c; /* 0x0040 */ - u16 reserved_2[10]; /* 0x004c */ + u16 reserved_4[10]; /* 0x004c */ u16 mc_int; /* 0x0060 */ u16 mc_int_en; /* 0x0062 */ u16 mc_status; /* 0x0064 */ @@ -135,10 +189,10 @@ struct ihs_fpga { u16 mc_res; /* 0x006e */ u16 mc_rx_cmd_status; /* 0x0070 */ u16 mc_rx_data; /* 0x0072 */ - u16 reserved_3[69]; /* 0x0074 */ + u16 reserved_5[69]; /* 0x0074 */ u16 reflection_high; /* 0x00fe */ struct ihs_osd osd; /* 0x0100 */ - u16 reserved_4[889]; /* 0x010e */ + u16 reserved_6[889]; /* 0x010e */ u16 videomem[31736]; /* 0x0800 */ }; #endif diff --git a/include/linux/compat.h b/include/linux/compat.h index 7ff6064..47b0889 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -57,17 +57,6 @@ void *kmem_cache_alloc(struct kmem_cache *obj, int flag); #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) -/* - * ..and if you can't take the strict - * types, you can specify one yourself. - * - * Or not use min/max at all, of course. - */ -#define min_t(type,x,y) \ - ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; }) -#define max_t(type,x,y) \ - ({ type __x = (x); type __y = (y); __x > __y ? __x: __y; }) - #ifndef BUG #define BUG() do { \ printf("U-Boot BUG at %s:%d!\n", __FILE__, __LINE__); \ @@ -81,24 +70,6 @@ void *kmem_cache_alloc(struct kmem_cache *obj, int flag); #define PAGE_SIZE 4096 -/** - * upper_32_bits - return MSB bits 32-63 of a number if little endian, or - * return MSB bits 0-31 of a number if big endian. - * @n: the number we're accessing - * - * A basic shift-right of a 64- or 32-bit quantity. Use this to suppress - * the "right shift count >= width of type" warning when that quantity is - * 32-bits. - */ -#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16)) - -/** - * lower_32_bits - return LSB bits 0-31 of a number if little endian, or - * return LSB bits 32-63 of a number if big endian. - * @n: the number we're accessing - */ -#define lower_32_bits(n) ((u32)(n)) - /* drivers/char/random.c */ #define get_random_bytes(...) @@ -152,17 +123,6 @@ typedef unsigned long blkcnt_t; #define ENOTSUPP 524 /* Operation is not supported */ -/* from include/linux/kernel.h */ -/* - * This looks more complex than it should be. But we need to - * get the type for the ~ right in round_down (it needs to be - * as wide as the result!), and we want to evaluate the macro - * arguments just once each. - */ -#define __round_mask(x, y) ((__typeof__(x))((y)-1)) -#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1) -#define round_down(x, y) ((x) & ~__round_mask(x, y)) - /* module */ #define THIS_MODULE 0 #define try_module_get(...) 1 @@ -198,18 +158,6 @@ typedef unsigned long blkcnt_t; #define blocking_notifier_call_chain(...) 0 -/* - * Multiplies an integer by a fraction, while avoiding unnecessary - * overflow or loss of precision. - */ -#define mult_frac(x, numer, denom)( \ -{ \ - typeof(x) quot = (x) / (denom); \ - typeof(x) rem = (x) % (denom); \ - (quot * (numer)) + ((rem * (numer)) / (denom)); \ -} \ -) - #define __initdata #define late_initcall(...) @@ -267,8 +215,6 @@ typedef int wait_queue_head_t; #define cond_resched() do { } while (0) #define yield() do { } while (0) -#define INT_MAX ((int)(~0U>>1)) - #define __user #define __init #define __exit diff --git a/include/linux/kernel.h b/include/linux/kernel.h new file mode 100644 index 0000000..89fcae0 --- /dev/null +++ b/include/linux/kernel.h @@ -0,0 +1,245 @@ +#ifndef _LINUX_KERNEL_H +#define _LINUX_KERNEL_H + + +#include <linux/types.h> + +#define USHRT_MAX ((u16)(~0U)) +#define SHRT_MAX ((s16)(USHRT_MAX>>1)) +#define SHRT_MIN ((s16)(-SHRT_MAX - 1)) +#define INT_MAX ((int)(~0U>>1)) +#define INT_MIN (-INT_MAX - 1) +#define UINT_MAX (~0U) +#define LONG_MAX ((long)(~0UL>>1)) +#define LONG_MIN (-LONG_MAX - 1) +#define ULONG_MAX (~0UL) +#define LLONG_MAX ((long long)(~0ULL>>1)) +#define LLONG_MIN (-LLONG_MAX - 1) +#define ULLONG_MAX (~0ULL) +#define SIZE_MAX (~(size_t)0) + +#define U8_MAX ((u8)~0U) +#define S8_MAX ((s8)(U8_MAX>>1)) +#define S8_MIN ((s8)(-S8_MAX - 1)) +#define U16_MAX ((u16)~0U) +#define S16_MAX ((s16)(U16_MAX>>1)) +#define S16_MIN ((s16)(-S16_MAX - 1)) +#define U32_MAX ((u32)~0U) +#define S32_MAX ((s32)(U32_MAX>>1)) +#define S32_MIN ((s32)(-S32_MAX - 1)) +#define U64_MAX ((u64)~0ULL) +#define S64_MAX ((s64)(U64_MAX>>1)) +#define S64_MIN ((s64)(-S64_MAX - 1)) + +#define STACK_MAGIC 0xdeadbeef + +#define REPEAT_BYTE(x) ((~0ul / 0xff) * (x)) + +#define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1) +#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask)) +#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a))) +#define IS_ALIGNED(x, a) (((x) & ((typeof(x))(a) - 1)) == 0) + +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +/* + * This looks more complex than it should be. But we need to + * get the type for the ~ right in round_down (it needs to be + * as wide as the result!), and we want to evaluate the macro + * arguments just once each. + */ +#define __round_mask(x, y) ((__typeof__(x))((y)-1)) +#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1) +#define round_down(x, y) ((x) & ~__round_mask(x, y)) + +#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) +#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) + +#if BITS_PER_LONG == 32 +# define DIV_ROUND_UP_SECTOR_T(ll,d) DIV_ROUND_UP_ULL(ll, d) +#else +# define DIV_ROUND_UP_SECTOR_T(ll,d) DIV_ROUND_UP(ll,d) +#endif + +/* The `const' in roundup() prevents gcc-3.3 from calling __divdi3 */ +#define roundup(x, y) ( \ +{ \ + const typeof(y) __y = y; \ + (((x) + (__y - 1)) / __y) * __y; \ +} \ +) +#define rounddown(x, y) ( \ +{ \ + typeof(x) __x = (x); \ + __x - (__x % (y)); \ +} \ +) + +/* + * Divide positive or negative dividend by positive divisor and round + * to closest integer. Result is undefined for negative divisors and + * for negative dividends if the divisor variable type is unsigned. + */ +#define DIV_ROUND_CLOSEST(x, divisor)( \ +{ \ + typeof(x) __x = x; \ + typeof(divisor) __d = divisor; \ + (((typeof(x))-1) > 0 || \ + ((typeof(divisor))-1) > 0 || (__x) > 0) ? \ + (((__x) + ((__d) / 2)) / (__d)) : \ + (((__x) - ((__d) / 2)) / (__d)); \ +} \ +) + +/* + * Multiplies an integer by a fraction, while avoiding unnecessary + * overflow or loss of precision. + */ +#define mult_frac(x, numer, denom)( \ +{ \ + typeof(x) quot = (x) / (denom); \ + typeof(x) rem = (x) % (denom); \ + (quot * (numer)) + ((rem * (numer)) / (denom)); \ +} \ +) + +/** + * upper_32_bits - return bits 32-63 of a number + * @n: the number we're accessing + * + * A basic shift-right of a 64- or 32-bit quantity. Use this to suppress + * the "right shift count >= width of type" warning when that quantity is + * 32-bits. + */ +#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16)) + +/** + * lower_32_bits - return bits 0-31 of a number + * @n: the number we're accessing + */ +#define lower_32_bits(n) ((u32)(n)) + +/* + * abs() handles unsigned and signed longs, ints, shorts and chars. For all + * input types abs() returns a signed long. + * abs() should not be used for 64-bit types (s64, u64, long long) - use abs64() + * for those. + */ +#define abs(x) ({ \ + long ret; \ + if (sizeof(x) == sizeof(long)) { \ + long __x = (x); \ + ret = (__x < 0) ? -__x : __x; \ + } else { \ + int __x = (x); \ + ret = (__x < 0) ? -__x : __x; \ + } \ + ret; \ + }) + +#define abs64(x) ({ \ + s64 __x = (x); \ + (__x < 0) ? -__x : __x; \ + }) + +/* + * min()/max()/clamp() macros that also do + * strict type-checking.. See the + * "unnecessary" pointer comparison. + */ +#define min(x, y) ({ \ + typeof(x) _min1 = (x); \ + typeof(y) _min2 = (y); \ + (void) (&_min1 == &_min2); \ + _min1 < _min2 ? _min1 : _min2; }) + +#define max(x, y) ({ \ + typeof(x) _max1 = (x); \ + typeof(y) _max2 = (y); \ + (void) (&_max1 == &_max2); \ + _max1 > _max2 ? _max1 : _max2; }) + +#define min3(x, y, z) min((typeof(x))min(x, y), z) +#define max3(x, y, z) max((typeof(x))max(x, y), z) + +/** + * min_not_zero - return the minimum that is _not_ zero, unless both are zero + * @x: value1 + * @y: value2 + */ +#define min_not_zero(x, y) ({ \ + typeof(x) __x = (x); \ + typeof(y) __y = (y); \ + __x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); }) + +/** + * clamp - return a value clamped to a given range with strict typechecking + * @val: current value + * @lo: lowest allowable value + * @hi: highest allowable value + * + * This macro does strict typechecking of lo/hi to make sure they are of the + * same type as val. See the unnecessary pointer comparisons. + */ +#define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi) + +/* + * ..and if you can't take the strict + * types, you can specify one yourself. + * + * Or not use min/max/clamp at all, of course. + */ +#define min_t(type, x, y) ({ \ + type __min1 = (x); \ + type __min2 = (y); \ + __min1 < __min2 ? __min1: __min2; }) + +#define max_t(type, x, y) ({ \ + type __max1 = (x); \ + type __max2 = (y); \ + __max1 > __max2 ? __max1: __max2; }) + +/** + * clamp_t - return a value clamped to a given range using a given type + * @type: the type of variable to use + * @val: current value + * @lo: minimum allowable value + * @hi: maximum allowable value + * + * This macro does no typechecking and uses temporary variables of type + * 'type' to make all the comparisons. + */ +#define clamp_t(type, val, lo, hi) min_t(type, max_t(type, val, lo), hi) + +/** + * clamp_val - return a value clamped to a given range using val's type + * @val: current value + * @lo: minimum allowable value + * @hi: maximum allowable value + * + * This macro does no typechecking and uses temporary variables of whatever + * type the input argument 'val' is. This is useful when val is an unsigned + * type and min and max are literals that will otherwise be assigned a signed + * integer type. + */ +#define clamp_val(val, lo, hi) clamp_t(typeof(val), val, lo, hi) + + +/* + * swap - swap value of @a and @b + */ +#define swap(a, b) \ + do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0) + +/** + * container_of - cast a member of a structure out to the containing structure + * @ptr: the pointer to the member. + * @type: the type of the container struct this is embedded in. + * @member: the name of the member within the struct. + * + */ +#define container_of(ptr, type, member) ({ \ + const typeof( ((type *)0)->member ) *__mptr = (ptr); \ + (type *)( (char *)__mptr - offsetof(type,member) );}) + +#endif diff --git a/include/malloc.h b/include/malloc.h index c33f3b4..5df6348 100644 --- a/include/malloc.h +++ b/include/malloc.h @@ -872,33 +872,46 @@ extern Void_t* sbrk(); #else -#ifdef USE_DL_PREFIX -#define cALLOc dlcalloc -#define fREe dlfree -#define mALLOc dlmalloc -#define mEMALIGn dlmemalign -#define rEALLOc dlrealloc -#define vALLOc dlvalloc -#define pvALLOc dlpvalloc -#define mALLINFo dlmallinfo -#define mALLOPt dlmallopt -#else /* USE_DL_PREFIX */ -#define cALLOc calloc -#define fREe free -#define mALLOc malloc -#define mEMALIGn memalign -#define rEALLOc realloc -#define vALLOc valloc -#define pvALLOc pvalloc -#define mALLINFo mallinfo -#define mALLOPt mallopt -#endif /* USE_DL_PREFIX */ +#ifdef CONFIG_SYS_MALLOC_SIMPLE +#define malloc malloc_simple +#define realloc realloc_simple +#define memalign memalign_simple +static inline void free(void *ptr) {} +void *calloc(size_t nmemb, size_t size); +void *memalign_simple(size_t alignment, size_t bytes); +void *realloc_simple(void *ptr, size_t size); +#else + +# ifdef USE_DL_PREFIX +# define cALLOc dlcalloc +# define fREe dlfree +# define mALLOc dlmalloc +# define mEMALIGn dlmemalign +# define rEALLOc dlrealloc +# define vALLOc dlvalloc +# define pvALLOc dlpvalloc +# define mALLINFo dlmallinfo +# define mALLOPt dlmallopt +# else /* USE_DL_PREFIX */ +# define cALLOc calloc +# define fREe free +# define mALLOc malloc +# define mEMALIGn memalign +# define rEALLOc realloc +# define vALLOc valloc +# define pvALLOc pvalloc +# define mALLINFo mallinfo +# define mALLOPt mallopt +# endif /* USE_DL_PREFIX */ #endif /* Public routines */ -#if __STD_C +/* Simple versions which can be used when space is tight */ +void *malloc_simple(size_t size); + +# if __STD_C Void_t* mALLOc(size_t); void fREe(Void_t*); @@ -913,7 +926,7 @@ size_t malloc_usable_size(Void_t*); void malloc_stats(void); int mALLOPt(int, int); struct mallinfo mALLINFo(void); -#else +# else Void_t* mALLOc(); void fREe(); Void_t* rEALLOc(); @@ -927,6 +940,7 @@ size_t malloc_usable_size(); void malloc_stats(); int mALLOPt(); struct mallinfo mALLINFo(); +# endif #endif /* diff --git a/include/os.h b/include/os.h index 0230a7f..e3645e0 100644 --- a/include/os.h +++ b/include/os.h @@ -217,9 +217,10 @@ const char *os_dirent_get_typename(enum os_dirent_t type); * Get the size of a file * * @param fname Filename to check - * @return size of file, or -1 if an error ocurred + * @param size size of file is returned if no error + * @return 0 on success or -1 if an error ocurred */ -ssize_t os_get_filesize(const char *fname); +int os_get_filesize(const char *fname, loff_t *size); /** * Write a character to the controlling OS terminal diff --git a/include/pci.h b/include/pci.h index 2ff7365..d211351 100644 --- a/include/pci.h +++ b/include/pci.h @@ -623,6 +623,7 @@ extern void pci_register_hose(struct pci_controller* hose); extern struct pci_controller* pci_bus_to_hose(int bus); extern struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr); +extern int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev); extern int pci_hose_scan(struct pci_controller *hose); extern int pci_hose_scan_bus(struct pci_controller *hose, int bus); diff --git a/include/sandboxfs.h b/include/sandboxfs.h index e7c3262..4c7745d 100644 --- a/include/sandboxfs.h +++ b/include/sandboxfs.h @@ -20,14 +20,18 @@ int sandbox_fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info); -long sandbox_fs_read_at(const char *filename, unsigned long pos, - void *buffer, unsigned long maxsize); +int sandbox_fs_read_at(const char *filename, loff_t pos, void *buffer, + loff_t maxsize, loff_t *actread); +int sandbox_fs_write_at(const char *filename, loff_t pos, void *buffer, + loff_t maxsize, loff_t *actwrite); void sandbox_fs_close(void); int sandbox_fs_ls(const char *dirname); int sandbox_fs_exists(const char *filename); -int sandbox_fs_size(const char *filename); -int fs_read_sandbox(const char *filename, void *buf, int offset, int len); -int fs_write_sandbox(const char *filename, void *buf, int offset, int len); +int sandbox_fs_size(const char *filename, loff_t *size); +int fs_read_sandbox(const char *filename, void *buf, loff_t offset, loff_t len, + loff_t *actread); +int fs_write_sandbox(const char *filename, void *buf, loff_t offset, + loff_t len, loff_t *actwrite); #endif diff --git a/include/spi.h b/include/spi.h index aa0a48e..5b78271 100644 --- a/include/spi.h +++ b/include/spi.h @@ -534,18 +534,14 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode, int spi_chip_select(struct udevice *slave); /** - * spi_bind_device() - bind a device to a bus's chip select - * - * This binds a new device to an given chip select (which must be unused). + * spi_find_chip_select() - Find the slave attached to chip select * * @bus: SPI bus to search - * @cs: Chip select to attach to - * @drv_name: Name of driver to attach to this chip select - * @dev_name: Name of the new device thus created - * @devp: Returns the newly bound device + * @cs: Chip select to look for + * @devp: Returns the slave device if found + * @return 0 if found, -ENODEV on error */ -int spi_bind_device(struct udevice *bus, int cs, const char *drv_name, - const char *dev_name, struct udevice **devp); +int spi_find_chip_select(struct udevice *bus, int cs, struct udevice **devp); /** * spi_ofdata_to_platdata() - decode standard SPI platform data diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h index 1fd15f4..324fe72 100644 --- a/include/ubi_uboot.h +++ b/include/ubi_uboot.h @@ -51,6 +51,14 @@ #undef CONFIG_MTD_UBI_BLOCK +/* ubi_init() disables returning error codes when built into the Linux + * kernel so that it doesn't hang the Linux kernel boot process. Since + * the U-Boot driver code depends on getting valid error codes from this + * function we just tell the UBI layer that we are building as a module + * (which only enables the additional error reporting). + */ +#define CONFIG_MTD_UBI_MODULE + #if !defined(CONFIG_MTD_UBI_BEB_LIMIT) #define CONFIG_MTD_UBI_BEB_LIMIT 20 #endif |