diff options
Diffstat (limited to 'include')
48 files changed, 636 insertions, 612 deletions
diff --git a/include/bios_emul.h b/include/bios_emul.h new file mode 100644 index 0000000..3643b82 --- /dev/null +++ b/include/bios_emul.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 1996-1999 SciTech Software, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _BIOS_EMUL_H +#define _BIOS_EMUL_H + +/* Include the register header directly here */ +#include "../drivers/bios_emulator/include/x86emu/regs.h" +#include <pci.h> + +/**************************************************************************** +REMARKS: +Data structure used to describe the details for the BIOS emulator system +environment as used by the X86 emulator library. + +HEADER: +biosemu.h + +MEMBERS: +vgaInfo - VGA BIOS information structure +biosmem_base - Base of the BIOS image +biosmem_limit - Limit of the BIOS image +busmem_base - Base of the VGA bus memory +****************************************************************************/ +typedef struct { + int function; + int device; + int bus; + u32 VendorID; + u32 DeviceID; + pci_dev_t pcidev; + void *BIOSImage; + u32 BIOSImageLen; + u8 LowMem[1536]; +} BE_VGAInfo; + +struct vbe_mode_info; + +int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int cleanUp); + +/* Run a BIOS ROM natively (only supported on x86 machines) */ +void bios_run_on_x86(pci_dev_t pcidev, unsigned long addr, int vesa_mode, + struct vbe_mode_info *mode_info); + +/** + * bios_set_interrupt_handler() - Install an interrupt handler for the BIOS + * + * This installs an interrupt handler that the BIOS will call when needed. + * + * @intnum: Interrupt number to install a handler for + * @int_handler_func: Function to call to handle interrupt + */ +void bios_set_interrupt_handler(int intnum, int (*int_handler_func)(void)); + +void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void)); + +int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo); + +int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len, + BE_VGAInfo *vga_info, int clean_up, int vesa_mode, + struct vbe_mode_info *mode_info); + +#endif diff --git a/include/common.h b/include/common.h index f1ab2cf..46f07fe 100644 --- a/include/common.h +++ b/include/common.h @@ -73,6 +73,9 @@ typedef volatile unsigned char vu_char; #ifdef CONFIG_ARM #define asmlinkage /* nothing */ #endif +#ifdef CONFIG_X86 +#define asmlinkage __attribute__((regparm(0))) +#endif #ifdef CONFIG_BLACKFIN #include <asm/blackfin.h> #endif @@ -442,11 +445,6 @@ extern ssize_t spi_read (uchar *, int, uchar *, int); extern ssize_t spi_write (uchar *, int, uchar *, int); #endif -#ifdef CONFIG_HERMES -/* $(BOARD)/hermes.c */ -void hermes_start_lxt980 (int speed); -#endif - #ifdef CONFIG_EVB64260 void evb64260_init(void); void debug_led(int, int); diff --git a/include/commproc.h b/include/commproc.h index d78ab00..6875c4c 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -535,34 +535,6 @@ typedef struct scc_enet { #define SICR_ENET_CLKRT ((uint)0x00002600) #endif /* CONFIG_FPS850L, CONFIG_FPS860L */ -/*** HERMES-PRO ******************************************************/ - -/* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */ - -#ifdef CONFIG_HERMES - -#define FEC_ENET /* use FEC for EThernet */ -#undef SCC_ENET - - -#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ -#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ -#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ -#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ -#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ -#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ -#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ -#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ -#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ -#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ -#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ -#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ -#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ - -#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ - -#endif /* CONFIG_HERMES */ - /*** IP860 **********************************************************/ #if defined(CONFIG_IP860) diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index 120fdc6..d23d2c4 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -418,8 +418,6 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NOR_SUPPORT #define CONFIG_SPL_TEXT_BASE 0xfc000000 -#define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/mpc5xxx" -#define CONFIG_SPL_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ #define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 0fbfa3f..09ee10c 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -304,7 +304,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_LIBCOMMON_SUPPORT diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 8719f76..190ef0e 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -313,7 +313,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_LIBCOMMON_SUPPORT diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h new file mode 100644 index 0000000..cc36330 --- /dev/null +++ b/include/configs/beagle_x15.h @@ -0,0 +1,88 @@ +/* + * (C) Copyright 2014 + * Texas Instruments Incorporated. + * Felipe Balbi <balbi@ti.com> + * + * Configuration settings for the TI Beagle x15 board. + * See ti_omap5_common.h for omap5 common settings. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_BEAGLE_X15_H +#define __CONFIG_BEAGLE_X15_H + +#define CONFIG_AM57XX + +#define CONFIG_NR_DRAM_BANKS 2 + +#define CONFIG_ENV_SIZE (64 << 10) +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0:1" +#define FAT_ENV_FILE "uboot.env" + +#define CONFIG_CMD_SAVEENV + +#define CONSOLEDEV "ttyO2" +#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ +#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ +#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_OMAP_ABE_SYSCK + +/* Define the default GPT table for eMMC */ +#define PARTS_DEFAULT \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" + +#include <configs/ti_omap5_common.h> + +/* Enhance our eMMC support / experience. */ +#define CONFIG_CMD_GPT +#define CONFIG_EFI_PARTITION +#define CONFIG_PARTITION_UUIDS +#define CONFIG_CMD_PART + +/* CPSW Ethernet */ +#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ +#define CONFIG_CMD_DHCP +#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ +#define CONFIG_MII /* Required in net/eth.c */ +#define CONFIG_PHY_GIGE /* per-board part of CPSW */ +#define CONFIG_PHYLIB + +#define CONFIG_SUPPORT_EMMC_BOOT + +/* USB xHCI HOST */ +#define CONFIG_CMD_USB +#define CONFIG_USB_HOST +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_OMAP +#define CONFIG_USB_STORAGE +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 + +#define CONFIG_OMAP_USB_PHY +#define CONFIG_OMAP_USB3PHY1_HOST + +/* SATA */ +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_CMD_SCSI +#define CONFIG_LIBATA +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) + +#endif /* __CONFIG_BEAGLE_X5_H */ diff --git a/include/configs/chromebook_link.h b/include/configs/chromebook_link.h index 8caeca6..645b31c 100644 --- a/include/configs/chromebook_link.h +++ b/include/configs/chromebook_link.h @@ -21,7 +21,6 @@ #define CONFIG_DCACHE_RAM_MRC_VAR_SIZE 0x4000 #define CONFIG_SYS_X86_START16 0xfffff800 #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_DISPLAY_CPUINFO #define CONFIG_X86_RESET_VECTOR @@ -40,20 +39,9 @@ {PCI_VENDOR_ID_INTEL, \ PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE} -/* - * These common x86 features are not yet supported, but are added in - * follow-on patches in this series. Add undefs here to avoid every patch - * having to put things back into x86-common.h - */ -#undef CONFIG_VIDEO -#undef CONFIG_CFB_CONSOLE -#undef CONFIG_ICH_SPI -#undef CONFIG_SPI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_SF -#undef CONFIG_USB_EHCI -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_SCSI +#define CONFIG_X86_OPTION_ROM_FILENAME pci8086,0166.bin +#define CONFIG_X86_OPTION_ROM_ADDR 0xfff90000 +#define CONFIG_VIDEO_X86 #define CONFIG_PCI_MEM_BUS 0xe0000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS @@ -67,6 +55,18 @@ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0xefff +#define CONFIG_SYS_EARLY_PCI_INIT +#define CONFIG_PCI_PNP + +#define CONFIG_BIOSEMU +#define VIDEO_IO_OFFSET 0 +#define CONFIG_X86EMU_RAW_IO + +#define CONFIG_CROS_EC +#define CONFIG_CROS_EC_LPC +#define CONFIG_CMD_CROS_EC +#define CONFIG_ARCH_EARLY_INIT_R + #define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \ "stdout=vga,serial\0" \ "stderr=vga,serial\0" diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 1919cde..ccd9b88 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -321,7 +321,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index 641ab48..92ce1e1 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -16,7 +16,6 @@ #include <configs/ti_omap5_common.h> -#undef CONFIG_MISC_INIT_R #undef CONFIG_SPL_OS_BOOT /* Enable Generic board */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index ca62461..930b08e 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -299,7 +299,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 2eaabde..174a711 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -50,6 +50,7 @@ #define CONFIG_EFI_PARTITION #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART +#define CONFIG_HSMMC2_8BIT /* CPSW Ethernet */ #define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ diff --git a/include/configs/hermes.h b/include/configs/hermes.h deleted file mode 100644 index 736ffb61..0000000 --- a/include/configs/hermes.h +++ /dev/null @@ -1,315 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC860 1 /* This is a MPC860T CPU */ -#define CONFIG_HERMES 1 /* ...on a HERMES-PRO board */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_BOARD_TYPES 1 /* support board types */ - -#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ - -#define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */ -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 /* Non-Standard value! */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#ifdef DEBUG -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 124 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x4000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - * +0x0004 - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * +0x0000 => 0x000000C0 - */ -#define CONFIG_SYS_SIUMCR 0 - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - * +0x0200 => 0x00C2 - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - * +0x0240 => 0x0082 - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit, set PLL multiplication factor ! - */ -/* +0x0286 => 0x00B0D0C0 */ -#define CONFIG_SYS_PLPRCR \ - ( (11 << PLPRCR_MF_SHIFT) | \ - PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | \ - /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \ - PLPRCR_CSR | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/ \ - ) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -/* +0x0282 => 0x03800000 */ -#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS | \ - SCCR_RTDIV | SCCR_RTSEL | \ - /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \ - SCCR_EBDF00 | SCCR_DFSYNC00 | \ - SCCR_DFBRG00 | SCCR_DFNL000 | \ - SCCR_DFNH000) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/* +0x0220 => 0x00C3 */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration Register 19-4 - *----------------------------------------------------------------------- - */ -/* +0x09C4 => TIMEP=1 */ -#define CONFIG_SYS_RCCR 0x0100 - -/*----------------------------------------------------------------------- - * RMDS - RISC Microcode Development Support Control Register - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RMDS 0 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFE000000 /* FLASH bank #0 */ - -/* used to re-map FLASH - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -/* allow for max 4 MB of Flash */ -#define CONFIG_SYS_REMAP_OR_AM 0xFFC00000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 1, CSNT = 1, SCY = 5, EHTR = 0 */ -#define CONFIG_SYS_OR_TIMING_FLASH ( OR_CSNT_SAM | /*OR_ACS_DIV4 |*/ OR_BI | \ - OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -/* 8 bit, bank valid */ -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -/* - * BR1/OR1 - SDRAM - * - * Multiplexed addresses, GPL5 output to GPL5_A (don't care) - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank */ -#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ -#define SDRAM_TIMING 0x00000A00 /* SDRAM-Timing */ - -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB SDRAM */ - -#define CONFIG_SYS_OR1_PRELIM (SDRAM_PRELIM_OR_AM | SDRAM_TIMING ) -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* - * BR2/OR2 - HPRO2: PEB2256 @ 0xE0000000, 8 Bit wide - */ -#define HPRO2_BASE 0xE0000000 -#define HPRO2_OR_AM 0xFFFF8000 -#define HPRO2_TIMING 0x00000934 - -#define CONFIG_SYS_OR2 (HPRO2_OR_AM | HPRO2_TIMING) -#define CONFIG_SYS_BR2 ((HPRO2_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) - -/* - * BR3/OR3: not used - * BR4/OR4: not used - * BR5/OR5: not used - * BR6/OR6: not used - * BR7/OR7: not used - */ - -/* - * MAMR settings for SDRAM - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -#endif /* __CONFIG_H */ diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 5a5f940..1b9c277 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -28,7 +28,6 @@ #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x00908000 #define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7" #define CONFIG_SPL_STACK 0x0091FFB8 #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT @@ -46,7 +45,7 @@ #if defined(CONFIG_SPL_MMC_SUPPORT) #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 138 /* offset 69KB */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024) #endif diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 58e7295..d43db52 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -671,8 +671,6 @@ #define CONFIG_SPL_TEXT_BASE 0xffff0000 /* last 64 KiB for SPL */ #define CONFIG_SYS_SPL_MAX_LEN (64 << 10) #define CONFIG_UBOOT_PAD_TO 458752 /* decimal for 'dd' */ -#define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/ppc4xx" -#define CONFIG_SPL_LDSCRIPT "arch/powerpc/cpu/ppc4xx/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ #define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/mcx.h b/include/configs/mcx.h index b775ebd..26eb220 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -369,7 +369,7 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" /* NAND boot config */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 27bf89c..8bdc08f 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -75,7 +75,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" /* Partition tables */ diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h index 2daf13c..1185f42 100644 --- a/include/configs/omap3_evm_quick_mmc.h +++ b/include/configs/omap3_evm_quick_mmc.h @@ -87,7 +87,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif /* __OMAP3_EVM_QUICK_MMC_H */ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index e8dc462..e07795f 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -23,6 +23,7 @@ #define CONFIG_SYS_NS16550_COM3 UART3_BASE #define CONFIG_BAUDRATE 115200 +#define CONFIG_MISC_INIT_R /* MMC ENV related defines */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h deleted file mode 100644 index 73a95e6..0000000 --- a/include/configs/ph1_ld4.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __PH1_XXX_H -#define __PH1_XXX_H - -/* - * Support Card Select - * - * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. - * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. - * CPLD is re-programmed for ARIMA board compatibility. - * No define - No support card. - */ - -#if 0 -#define CONFIG_PFC_MICRO_SUPPORT_CARD -#else -#define CONFIG_DCC_MICRO_SUPPORT_CARD -#endif - -/* - * Serial Configuration - * SoC UART : enable CONFIG_UNIPHIER_SERIAL - * On-board UART: enable CONFIG_SYS_NS16550_SERIAL - */ -#if 0 -#define CONFIG_SYS_NS16550_SERIAL -#endif - -#define CONFIG_SMC911X - -#define CONFIG_DDR_NUM_CH0 1 -#define CONFIG_DDR_NUM_CH1 1 - -/* - * Memory Size & Mapping - */ -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x10000000 -#define CONFIG_SDRAM1_BASE 0x90000000 -#define CONFIG_SDRAM1_SIZE 0x10000000 - -#define CONFIG_SPL_TEXT_BASE 0x40000 - -#include "uniphier-common.h" - -#endif /* __PH1_XXX_H */ diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h deleted file mode 100644 index fc5132d..0000000 --- a/include/configs/ph1_pro4.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __PH1_XXX_H -#define __PH1_XXX_H - -/* - * Support Card Select - * - * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. - * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. - * CPLD is re-programmed for ARIMA board compatibility. - * No define - No support card. - */ - -#if 0 -#define CONFIG_PFC_MICRO_SUPPORT_CARD -#else -#define CONFIG_DCC_MICRO_SUPPORT_CARD -#endif - -/* - * Serial Configuration - * SoC UART : enable CONFIG_UNIPHIER_SERIAL - * On-board UART: enable CONFIG_SYS_NS16550_SERIAL - */ -#if 0 -#define CONFIG_SYS_NS16550_SERIAL -#endif - -#define CONFIG_SMC911X - -#define CONFIG_DDR_NUM_CH0 2 -#define CONFIG_DDR_NUM_CH1 2 - -#define CONFIG_UNIPHIER_SMP - -/* - * Memory Size & Mapping - */ -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x20000000 -#define CONFIG_SDRAM1_BASE 0xa0000000 -#define CONFIG_SDRAM1_SIZE 0x20000000 - -#define CONFIG_SPL_TEXT_BASE 0x100000 - -#include "uniphier-common.h" - -#endif /* __PH1_XXX_H */ diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h deleted file mode 100644 index e2f1102..0000000 --- a/include/configs/ph1_sld8.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __PH1_XXX_H -#define __PH1_XXX_H - -/* - * Support Card Select - * - * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. - * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. - * CPLD is re-programmed for ARIMA board compatibility. - * No define - No support card. - */ - -#if 0 -#define CONFIG_PFC_MICRO_SUPPORT_CARD -#else -#define CONFIG_DCC_MICRO_SUPPORT_CARD -#endif - -/* - * Serial Configuration - * SoC UART : enable CONFIG_UNIPHIER_SERIAL - * On-board UART: enable CONFIG_SYS_NS16550_SERIAL - */ -#if 0 -#define CONFIG_SYS_NS16550_SERIAL -#endif - -#define CONFIG_SMC911X - -#define CONFIG_DDR_NUM_CH0 1 -#define CONFIG_DDR_NUM_CH1 1 - -/* #define CONFIG_DDR_STANDARD */ - -/* - * Memory Size & Mapping - */ -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x10000000 -#define CONFIG_SDRAM1_BASE 0x90000000 -#define CONFIG_SDRAM1_SIZE 0x10000000 - -#define CONFIG_SPL_TEXT_BASE 0x40000 - -#include "uniphier-common.h" - -#endif /* __PH1_XXX_H */ diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index d75d562..946b2c8 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -150,4 +150,8 @@ #define CONFIG_SYS_CONSOLE_FG_COL 0x00 #endif +#ifndef CONFIG_SPL_BUILD +#define CONFIG_FIT +#endif + #endif /* ! __CONFIG_PXM2_H */ diff --git a/include/configs/rpi_b.h b/include/configs/rpi.h index 41e975f..4d5426e 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi.h @@ -105,15 +105,15 @@ /* Environment */ #define CONFIG_ENV_SIZE SZ_16K -#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0:1" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_FAT_WRITE #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_SYS_LOAD_ADDR 0x1000000 #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_PREBOOT \ - "if load mmc 0:1 ${loadaddr} /uEnv.txt; then " \ - "env import -t -r ${loadaddr} ${filesize}; " \ - "fi" /* Shell */ #define CONFIG_SYS_MAXARGS 8 @@ -138,7 +138,6 @@ /* Some things don't make sense on this HW or yet */ #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SAVEENV /* Environment */ #define ENV_DEVICE_SETTINGS \ @@ -175,7 +174,6 @@ "pxefile_addr_r=0x00100000\0" \ "kernel_addr_r=0x01000000\0" \ "fdt_addr_r=0x02000000\0" \ - "fdtfile=bcm2835-rpi-b.dtb\0" \ "ramdisk_addr_r=0x02100000\0" \ #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/rut.h b/include/configs/rut.h index 6bddede..0067ea4 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -154,4 +154,8 @@ #define CONFIG_SYS_CONSOLE_FG_COL 0x00 #endif +#ifndef CONFIG_SPL_BUILD +#define CONFIG_FIT +#endif + #endif /* ! __CONFIG_RUT_H */ diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 5b77db2..d5588b1 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -230,7 +230,7 @@ #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index dfbf3cb..f2849d7 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -276,7 +276,7 @@ #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 0d5dba1..21e13e5 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -148,7 +148,7 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index a160329..7d2c0d2 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -304,7 +304,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 2fddef3..deb6bb2 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -178,7 +178,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index aeabb1b..87a4efc 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -144,7 +144,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index a8790c2..bc75172 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -233,7 +233,7 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ /* FAT sd card locations. */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #ifdef CONFIG_SPL_OS_BOOT diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 3166392..c47651d 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -19,7 +19,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_MISC_INIT_R #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_CACHELINE_SIZE 64 @@ -79,7 +78,7 @@ "partitions=" PARTS_DEFAULT "\0" \ "optargs=\0" \ "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk1p2 rw\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ "mmcrootfstype=ext4 rootwait\0" \ "mmcargs=setenv bootargs console=${console} " \ "${optargs} " \ @@ -118,6 +117,8 @@ "setenv fdtfile dra7-evm.dtb; fi;" \ "if test $board_name = dra72x; then " \ "setenv fdtfile dra72-evm.dtb; fi;" \ + "if test $board_name = beagle_x15; then " \ + "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 6e7a7fb..36621a5 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -349,7 +349,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier.h index 7c4dba0..dd022fb 100644 --- a/include/configs/uniphier-common.h +++ b/include/configs/uniphier.h @@ -10,10 +10,37 @@ #ifndef __CONFIG_UNIPHIER_COMMON_H__ #define __CONFIG_UNIPHIER_COMMON_H__ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) && \ - defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -# error "Both CONFIG_PFC_MICRO_SUPPORT_CARD and CONFIG_DCC_MICRO_SUPPORT_CARD \ -are defined. Select only one of them." +#if defined(CONFIG_MACH_PH1_PRO4) +#define CONFIG_DDR_NUM_CH0 2 +#define CONFIG_DDR_NUM_CH1 2 + +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x20000000 +#define CONFIG_SDRAM1_BASE 0xa0000000 +#define CONFIG_SDRAM1_SIZE 0x20000000 +#endif + +#if defined(CONFIG_MACH_PH1_LD4) +#define CONFIG_DDR_NUM_CH0 1 +#define CONFIG_DDR_NUM_CH1 1 + +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x10000000 +#define CONFIG_SDRAM1_BASE 0x90000000 +#define CONFIG_SDRAM1_SIZE 0x10000000 +#endif + +#if defined(CONFIG_MACH_PH1_SLD8) +#define CONFIG_DDR_NUM_CH0 1 +#define CONFIG_DDR_NUM_CH1 1 + +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x10000000 +#define CONFIG_SDRAM1_BASE 0x90000000 +#define CONFIG_SDRAM1_SIZE 0x10000000 #endif /* @@ -40,6 +67,13 @@ are defined. Select only one of them." #define CONFIG_SYS_NS16550_REG_SIZE -2 #endif +/* TODO: move to Kconfig and device tree */ +#if 0 +#define CONFIG_SYS_NS16550_SERIAL +#endif + +#define CONFIG_SMC911X + #define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE #define CONFIG_SMC911X_32_BIT @@ -58,6 +92,7 @@ are defined. Select only one of them." #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) @@ -87,17 +122,7 @@ are defined. Select only one of them." #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -# define CONFIG_SYS_FLASH_BANKS_LIST {0x00000000} -# define CONFIG_SYS_FLASH_BANKS_SIZES {0x02000000} -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -# define CONFIG_SYS_FLASH_BANKS_LIST {0x04000000} -# define CONFIG_SYS_FLASH_BANKS_SIZES {0x04000000} -#endif +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2 /* serial console configuration */ #define CONFIG_BAUDRATE 115200 @@ -112,7 +137,6 @@ are defined. Select only one of them." #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -143,15 +167,6 @@ are defined. Select only one of them." */ #define CONFIG_ARP_TIMEOUT 500UL /* 0.5 msec */ -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_TIME -#define CONFIG_CMD_NAND /* NAND flash suppport */ - #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 2 #define CONFIG_SYS_NAND_ONFI_DETECTION @@ -167,7 +182,6 @@ are defined. Select only one of them." #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 /* USB */ -#define CONFIG_CMD_USB #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE @@ -216,7 +230,6 @@ are defined. Select only one of them." "image_offset=0x00080000\0" \ "image_size=0x00f00000\0" \ "verify=n\0" \ - "autostart=yes\0" \ "norboot=run add_default_bootargs;" \ "bootm $image_offset\0" \ "nandboot=run add_default_bootargs;" \ @@ -225,10 +238,6 @@ are defined. Select only one of them." "add_default_bootargs=setenv bootargs $bootargs" \ " console=ttyS0,$baudrate\0" \ -/* FIT support */ -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ - /* Open Firmware flat tree */ #define CONFIG_OF_LIBFDT @@ -248,6 +257,13 @@ are defined. Select only one of them." #define CONFIG_SYS_TEXT_BASE 0x84000000 +#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) +#define CONFIG_SPL_TEXT_BASE 0x00040000 +#endif +#if defined(CONFIG_MACH_PH1_PRO4) +#define CONFIG_SPL_TEXT_BASE 0x00100000 +#endif + #define CONFIG_BOARD_POSTCLK_INIT #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index c39c568..87b4fff 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -265,7 +265,7 @@ #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" diff --git a/include/fdtdec.h b/include/fdtdec.h index 3da9fab..d2b665c 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -120,6 +120,9 @@ enum fdt_compat_id { COMPAT_INTEL_LPC, /* Intel Low Pin Count I/F */ COMPAT_INTEL_MICROCODE, /* Intel microcode update */ COMPAT_MEMORY_SPD, /* Memory SPD information */ + COMPAT_INTEL_PANTHERPOINT_AHCI, /* Intel Pantherpoint AHCI */ + COMPAT_INTEL_MODEL_206AX, /* Intel Model 206AX CPU */ + COMPAT_INTEL_GMA, /* Intel Graphics Media Accelerator */ COMPAT_COUNT, }; @@ -390,17 +393,6 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int node, int *seqp); /** - * Get the offset of the given alias node - * - * This looks up an alias in /aliases then finds the offset of that node. - * - * @param blob Device tree blob (if NULL, then error is returned) - * @param name Alias name, e.g. "console" - * @return Node offset referred to by that alias, or -ve FDT_ERR_... - */ -int fdtdec_get_alias_node(const void *blob, const char *name); - -/** * Get the offset of the given chosen node * * This looks up a property in /chosen containing the path to another node, diff --git a/include/linux/compat.h b/include/linux/compat.h index 47b0889..b40133c 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -215,13 +215,11 @@ typedef int wait_queue_head_t; #define cond_resched() do { } while (0) #define yield() do { } while (0) -#define __user #define __init #define __exit #define __devinit #define __devinitdata #define __devinitconst -#define __iomem #define kthread_create(...) __builtin_return_address(0) #define kthread_stop(...) do { } while (0) @@ -252,8 +250,6 @@ struct cdev { #define cdev_add(...) 0 #define cdev_del(...) do { } while (0) -#define MAX_ERRNO 4095 - #define prandom_u32(...) 0 typedef struct { diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 89fcae0..0b61671 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -16,7 +16,9 @@ #define LLONG_MAX ((long long)(~0ULL>>1)) #define LLONG_MIN (-LLONG_MAX - 1) #define ULLONG_MAX (~0ULL) +#ifndef SIZE_MAX #define SIZE_MAX (~(size_t)0) +#endif #define U8_MAX ((u8)~0U) #define S8_MAX ((s8)(U8_MAX>>1)) diff --git a/include/linux/usb/xhci-omap.h b/include/linux/usb/xhci-omap.h index 82630ad..cb166e6 100644 --- a/include/linux/usb/xhci-omap.h +++ b/include/linux/usb/xhci-omap.h @@ -14,6 +14,10 @@ #define OMAP_XHCI_BASE 0x488d0000 #define OMAP_OCP1_SCP_BASE 0x4A081000 #define OMAP_OTG_WRAPPER_BASE 0x488c0000 +#elif defined CONFIG_AM57XX +#define OMAP_XHCI_BASE 0x48890000 +#define OMAP_OCP1_SCP_BASE 0x4A084c00 +#define OMAP_OTG_WRAPPER_BASE 0x48880000 #elif defined CONFIG_AM43XX #define OMAP_XHCI_BASE 0x483d0000 #define OMAP_OCP1_SCP_BASE 0x483E8000 diff --git a/include/mmc.h b/include/mmc.h index d74a190..adffc35 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -385,6 +385,7 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); int mmc_legacy_init(int verbose); #endif +void board_mmc_power_init(void); int board_mmc_init(bd_t *bis); int cpu_mmc_init(bd_t *bis); int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr); diff --git a/include/pci.h b/include/pci.h index d211351..216f448 100644 --- a/include/pci.h +++ b/include/pci.h @@ -678,5 +678,28 @@ extern void pci_mpc824x_init (struct pci_controller *hose); extern void pci_mpc85xx_init (struct pci_controller *hose); #endif +/** + * pci_write_bar32() - Write the address of a BAR including control bits + * + * This writes a raw address (with control bits) to a bar + * + * @hose: PCI hose to use + * @dev: PCI device to update + * @barnum: BAR number (0-5) + * @addr: BAR address with control bits + */ +void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum, + u32 addr_and_ctrl); + +/** + * pci_read_bar32() - read the address of a bar + * + * @hose: PCI hose to use + * @dev: PCI device to inspect + * @barnum: BAR number (0-5) + * @return address of the bar, masking out any control bits + * */ +u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum); + #endif /* __ASSEMBLY__ */ #endif /* _PCI_H */ diff --git a/include/pci_ids.h b/include/pci_ids.h index f84c13a..ee98bee 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -526,7 +526,19 @@ #define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302 #define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303 #define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304 -#define PCI_DEVICE_ID_AMD_15H_NB_MISC 0x1603 +#define PCI_DEVICE_ID_AMD_15H_M10H_F3 0x1403 +#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F3 0x141d +#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F4 0x141e +#define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600 +#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601 +#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602 +#define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603 +#define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604 +#define PCI_DEVICE_ID_AMD_15H_NB_F5 0x1605 +#define PCI_DEVICE_ID_AMD_16H_NB_F3 0x1533 +#define PCI_DEVICE_ID_AMD_16H_NB_F4 0x1534 +#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F3 0x1583 +#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F4 0x1584 #define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703 #define PCI_DEVICE_ID_AMD_LANCE 0x2000 #define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001 @@ -569,8 +581,9 @@ #define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A #define PCI_DEVICE_ID_AMD_LX_VIDEO 0x2081 #define PCI_DEVICE_ID_AMD_LX_AES 0x2082 -#define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c #define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800 +#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b +#define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c #define PCI_VENDOR_ID_TRIDENT 0x1023 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000 @@ -616,6 +629,8 @@ #define PCI_DEVICE_ID_MATROX_G550 0x2527 #define PCI_DEVICE_ID_MATROX_VIA 0x4536 +#define PCI_VENDOR_ID_MOBILITY_ELECTRONICS 0x14f2 + #define PCI_VENDOR_ID_CT 0x102c #define PCI_DEVICE_ID_CT_69000 0x00c0 #define PCI_DEVICE_ID_CT_65545 0x00d8 @@ -724,6 +739,7 @@ #define PCI_DEVICE_ID_SI_7018 0x7018 #define PCI_VENDOR_ID_HP 0x103c +#define PCI_VENDOR_ID_HP_3PAR 0x1590 #define PCI_DEVICE_ID_HP_VISUALIZE_EG 0x1005 #define PCI_DEVICE_ID_HP_VISUALIZE_FX6 0x1006 #define PCI_DEVICE_ID_HP_VISUALIZE_FX4 0x1008 @@ -755,6 +771,8 @@ #define PCI_DEVICE_ID_HP_CISSD 0x3238 #define PCI_DEVICE_ID_HP_CISSE 0x323a #define PCI_DEVICE_ID_HP_CISSF 0x323b +#define PCI_DEVICE_ID_HP_CISSH 0x323c +#define PCI_DEVICE_ID_HP_CISSI 0x3239 #define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031 #define PCI_VENDOR_ID_PCTECH 0x1042 @@ -779,6 +797,29 @@ #define PCI_DEVICE_ID_ELSA_QS3000 0x3000 #define PCI_VENDOR_ID_STMICRO 0x104A +#define PCI_DEVICE_ID_STMICRO_USB_HOST 0xCC00 +#define PCI_DEVICE_ID_STMICRO_USB_OHCI 0xCC01 +#define PCI_DEVICE_ID_STMICRO_USB_OTG 0xCC02 +#define PCI_DEVICE_ID_STMICRO_UART_HWFC 0xCC03 +#define PCI_DEVICE_ID_STMICRO_UART_NO_HWFC 0xCC04 +#define PCI_DEVICE_ID_STMICRO_SOC_DMA 0xCC05 +#define PCI_DEVICE_ID_STMICRO_SATA 0xCC06 +#define PCI_DEVICE_ID_STMICRO_I2C 0xCC07 +#define PCI_DEVICE_ID_STMICRO_SPI_HS 0xCC08 +#define PCI_DEVICE_ID_STMICRO_MAC 0xCC09 +#define PCI_DEVICE_ID_STMICRO_SDIO_EMMC 0xCC0A +#define PCI_DEVICE_ID_STMICRO_SDIO 0xCC0B +#define PCI_DEVICE_ID_STMICRO_GPIO 0xCC0C +#define PCI_DEVICE_ID_STMICRO_VIP 0xCC0D +#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_DMA 0xCC0E +#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_SRCS 0xCC0F +#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_MSPS 0xCC10 +#define PCI_DEVICE_ID_STMICRO_CAN 0xCC11 +#define PCI_DEVICE_ID_STMICRO_MLB 0xCC12 +#define PCI_DEVICE_ID_STMICRO_DBP 0xCC13 +#define PCI_DEVICE_ID_STMICRO_SATA_PHY 0xCC14 +#define PCI_DEVICE_ID_STMICRO_ESRAM 0xCC15 +#define PCI_DEVICE_ID_STMICRO_VIC 0xCC16 #define PCI_VENDOR_ID_BUSLOGIC 0x104B #define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140 @@ -1294,6 +1335,8 @@ #define PCI_VENDOR_ID_TUNDRA 0x10e3 #define PCI_DEVICE_ID_TUNDRA_CA91C042 0x0000 +#define PCI_VENDOR_ID_AMCC 0x10e8 + #define PCI_VENDOR_ID_INTERG 0x10ea #define PCI_DEVICE_ID_INTERG_1682 0x1682 #define PCI_DEVICE_ID_INTERG_2000 0x2000 @@ -1322,6 +1365,7 @@ #define PCI_SUBDEVICE_ID_CREATIVE_SB08801 0x0041 #define PCI_SUBDEVICE_ID_CREATIVE_SB08802 0x0042 #define PCI_SUBDEVICE_ID_CREATIVE_SB08803 0x0043 +#define PCI_SUBDEVICE_ID_CREATIVE_SB1270 0x0062 #define PCI_SUBDEVICE_ID_CREATIVE_HENDRIX 0x6000 #define PCI_VENDOR_ID_ECTIVA 0x1102 /* duplicate: CREATIVE */ @@ -1411,6 +1455,7 @@ #define PCI_DEVICE_ID_VIA_CX700_IDE 0x0581 #define PCI_DEVICE_ID_VIA_VX800 0x8353 #define PCI_DEVICE_ID_VIA_VX855 0x8409 +#define PCI_DEVICE_ID_VIA_VX900 0x8410 #define PCI_DEVICE_ID_VIA_8371_1 0x8391 #define PCI_DEVICE_ID_VIA_82C598_1 0x8598 #define PCI_DEVICE_ID_VIA_838X_1 0xB188 @@ -1551,6 +1596,8 @@ #define PCI_DEVICE_ID_RICOH_RL5C476 0x0476 #define PCI_DEVICE_ID_RICOH_RL5C478 0x0478 #define PCI_DEVICE_ID_RICOH_R5C822 0x0822 +#define PCI_DEVICE_ID_RICOH_R5CE822 0xe822 +#define PCI_DEVICE_ID_RICOH_R5CE823 0xe823 #define PCI_DEVICE_ID_RICOH_R5C832 0x0832 #define PCI_DEVICE_ID_RICOH_R5C843 0x0843 @@ -1586,6 +1633,7 @@ #define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334 #define PCI_VENDOR_ID_MARVELL 0x11ab +#define PCI_VENDOR_ID_MARVELL_EXT 0x1b4b #define PCI_DEVICE_ID_MARVELL_GT64111 0x4146 #define PCI_DEVICE_ID_MARVELL_GT64260 0x6430 #define PCI_DEVICE_ID_MARVELL_MV64360 0x6460 @@ -1798,6 +1846,8 @@ #define PCI_VENDOR_ID_ESDGMBH 0x12fe #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 +#define PCI_VENDOR_ID_CB 0x1307 /* Measurement Computing */ + #define PCI_VENDOR_ID_SIIG 0x131f #define PCI_SUBVENDOR_ID_SIIG 0x131f #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 @@ -1860,8 +1910,23 @@ #define PCI_VENDOR_ID_QUATECH 0x135C #define PCI_DEVICE_ID_QUATECH_QSC100 0x0010 #define PCI_DEVICE_ID_QUATECH_DSC100 0x0020 +#define PCI_DEVICE_ID_QUATECH_DSC200 0x0030 +#define PCI_DEVICE_ID_QUATECH_QSC200 0x0040 #define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050 #define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060 +#define PCI_DEVICE_ID_QUATECH_QSCP100 0x0120 +#define PCI_DEVICE_ID_QUATECH_DSCP100 0x0130 +#define PCI_DEVICE_ID_QUATECH_QSCP200 0x0140 +#define PCI_DEVICE_ID_QUATECH_DSCP200 0x0150 +#define PCI_DEVICE_ID_QUATECH_QSCLP100 0x0170 +#define PCI_DEVICE_ID_QUATECH_DSCLP100 0x0180 +#define PCI_DEVICE_ID_QUATECH_DSC100E 0x0181 +#define PCI_DEVICE_ID_QUATECH_SSCLP100 0x0190 +#define PCI_DEVICE_ID_QUATECH_QSCLP200 0x01A0 +#define PCI_DEVICE_ID_QUATECH_DSCLP200 0x01B0 +#define PCI_DEVICE_ID_QUATECH_DSC200E 0x01B1 +#define PCI_DEVICE_ID_QUATECH_SSCLP200 0x01C0 +#define PCI_DEVICE_ID_QUATECH_ESCLP100 0x01E0 #define PCI_DEVICE_ID_QUATECH_SPPXP_100 0x0278 #define PCI_VENDOR_ID_SEALEVEL 0x135e @@ -1978,6 +2043,9 @@ #define PCI_DEVICE_ID_EXAR_XR17C152 0x0152 #define PCI_DEVICE_ID_EXAR_XR17C154 0x0154 #define PCI_DEVICE_ID_EXAR_XR17C158 0x0158 +#define PCI_DEVICE_ID_EXAR_XR17V352 0x0352 +#define PCI_DEVICE_ID_EXAR_XR17V354 0x0354 +#define PCI_DEVICE_ID_EXAR_XR17V358 0x0358 #define PCI_VENDOR_ID_MICROGATE 0x13c0 #define PCI_DEVICE_ID_MICROGATE_USC 0x0010 @@ -2002,6 +2070,10 @@ #define PCI_DEVICE_ID_CMEDIA_CM8738 0x0111 #define PCI_DEVICE_ID_CMEDIA_CM8738B 0x0112 +#define PCI_VENDOR_ID_ADVANTECH 0x13fe + +#define PCI_VENDOR_ID_MEILHAUS 0x1402 + #define PCI_VENDOR_ID_LAVA 0x1407 #define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */ #define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */ @@ -2047,6 +2119,8 @@ #define PCI_VENDOR_ID_CHELSIO 0x1425 +#define PCI_VENDOR_ID_ADLINK 0x144a + #define PCI_VENDOR_ID_SAMSUNG 0x144d #define PCI_VENDOR_ID_GIGABYTE 0x1458 @@ -2080,6 +2154,8 @@ #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182 #define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150 +#define PCI_VENDOR_ID_AMPLICON 0x14dc + #define PCI_VENDOR_ID_BCM_GVC 0x14a4 #define PCI_VENDOR_ID_BROADCOM 0x14e4 #define PCI_DEVICE_ID_TIGON3_5752 0x1600 @@ -2100,19 +2176,25 @@ #define PCI_DEVICE_ID_NX2_57711E 0x1650 #define PCI_DEVICE_ID_TIGON3_5705 0x1653 #define PCI_DEVICE_ID_TIGON3_5705_2 0x1654 +#define PCI_DEVICE_ID_TIGON3_5719 0x1657 #define PCI_DEVICE_ID_TIGON3_5721 0x1659 #define PCI_DEVICE_ID_TIGON3_5722 0x165a #define PCI_DEVICE_ID_TIGON3_5723 0x165b #define PCI_DEVICE_ID_TIGON3_5705M 0x165d #define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e +#define PCI_DEVICE_ID_NX2_57712 0x1662 +#define PCI_DEVICE_ID_NX2_57712E 0x1663 +#define PCI_DEVICE_ID_NX2_57712_MF 0x1663 #define PCI_DEVICE_ID_TIGON3_5714 0x1668 #define PCI_DEVICE_ID_TIGON3_5714S 0x1669 #define PCI_DEVICE_ID_TIGON3_5780 0x166a #define PCI_DEVICE_ID_TIGON3_5780S 0x166b #define PCI_DEVICE_ID_TIGON3_5705F 0x166e +#define PCI_DEVICE_ID_NX2_57712_VF 0x166f #define PCI_DEVICE_ID_TIGON3_5754M 0x1672 #define PCI_DEVICE_ID_TIGON3_5755M 0x1673 #define PCI_DEVICE_ID_TIGON3_5756 0x1674 +#define PCI_DEVICE_ID_TIGON3_5750 0x1676 #define PCI_DEVICE_ID_TIGON3_5751 0x1677 #define PCI_DEVICE_ID_TIGON3_5715 0x1678 #define PCI_DEVICE_ID_TIGON3_5715S 0x1679 @@ -2124,6 +2206,9 @@ #define PCI_DEVICE_ID_TIGON3_5761E 0x1680 #define PCI_DEVICE_ID_TIGON3_5761 0x1681 #define PCI_DEVICE_ID_TIGON3_5764 0x1684 +#define PCI_DEVICE_ID_NX2_57800 0x168a +#define PCI_DEVICE_ID_NX2_57840 0x168d +#define PCI_DEVICE_ID_NX2_57810 0x168e #define PCI_DEVICE_ID_TIGON3_5787M 0x1693 #define PCI_DEVICE_ID_TIGON3_5782 0x1696 #define PCI_DEVICE_ID_TIGON3_5784 0x1698 @@ -2131,11 +2216,19 @@ #define PCI_DEVICE_ID_TIGON3_5787 0x169b #define PCI_DEVICE_ID_TIGON3_5788 0x169c #define PCI_DEVICE_ID_TIGON3_5789 0x169d +#define PCI_DEVICE_ID_NX2_57840_4_10 0x16a1 +#define PCI_DEVICE_ID_NX2_57840_2_20 0x16a2 +#define PCI_DEVICE_ID_NX2_57840_MF 0x16a4 +#define PCI_DEVICE_ID_NX2_57800_MF 0x16a5 #define PCI_DEVICE_ID_TIGON3_5702X 0x16a6 #define PCI_DEVICE_ID_TIGON3_5703X 0x16a7 #define PCI_DEVICE_ID_TIGON3_5704S 0x16a8 +#define PCI_DEVICE_ID_NX2_57800_VF 0x16a9 #define PCI_DEVICE_ID_NX2_5706S 0x16aa #define PCI_DEVICE_ID_NX2_5708S 0x16ac +#define PCI_DEVICE_ID_NX2_57840_VF 0x16ad +#define PCI_DEVICE_ID_NX2_57810_MF 0x16ae +#define PCI_DEVICE_ID_NX2_57810_VF 0x16af #define PCI_DEVICE_ID_TIGON3_5702A3 0x16c6 #define PCI_DEVICE_ID_TIGON3_5703A3 0x16c7 #define PCI_DEVICE_ID_TIGON3_5781 0x16dd @@ -2307,6 +2400,8 @@ #define PCI_VENDOR_ID_TOPSPIN 0x1867 +#define PCI_VENDOR_ID_COMMTECH 0x18f7 + #define PCI_VENDOR_ID_SILAN 0x1904 #define PCI_VENDOR_ID_RENESAS 0x1912 @@ -2316,6 +2411,11 @@ #define PCI_DEVICE_ID_RENESAS_SH7785 0x0007 #define PCI_DEVICE_ID_RENESAS_SH7786 0x0010 +#define PCI_VENDOR_ID_SOLARFLARE 0x1924 +#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0 0x0703 +#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1 0x6703 +#define PCI_DEVICE_ID_SOLARFLARE_SFC4000B 0x0710 + #define PCI_VENDOR_ID_TDI 0x192E #define PCI_DEVICE_ID_TDI_EHCI 0x0101 @@ -2414,6 +2514,11 @@ #define PCI_VENDOR_ID_AZWAVE 0x1a3b +#define PCI_VENDOR_ID_ASMEDIA 0x1b21 + +#define PCI_VENDOR_ID_CIRCUITCO 0x1cc8 +#define PCI_SUBSYSTEM_ID_CIRCUITCO_MINNOWBOARD 0x0001 + #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 @@ -2463,6 +2568,9 @@ #define PCI_VENDOR_ID_INTEL 0x8086 #define PCI_DEVICE_ID_INTEL_EESSC 0x0008 +#define PCI_DEVICE_ID_INTEL_SNB_IMC 0x0100 +#define PCI_DEVICE_ID_INTEL_IVB_IMC 0x0154 +#define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00 #define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320 #define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321 #define PCI_DEVICE_ID_INTEL_PXH_0 0x0329 @@ -2485,6 +2593,7 @@ #define PCI_DEVICE_ID_INTEL_MRST_SD2 0x084F #define PCI_DEVICE_ID_INTEL_I960 0x0960 #define PCI_DEVICE_ID_INTEL_I960RM 0x0962 +#define PCI_DEVICE_ID_INTEL_CENTERTON_ILB 0x0c60 #define PCI_DEVICE_ID_INTEL_82541ER 0x1078 #define PCI_DEVICE_ID_INTEL_82541GI_LF 0x107c #define PCI_DEVICE_ID_INTEL_82542 0x1000 @@ -2564,13 +2673,50 @@ #define PCI_DEVICE_ID_INTEL_COUGARPOINT_HDA 0x1c20 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN 0x1c41 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_Z68 0x1c44 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_P67 0x1c46 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_UM67 0x1c47 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_HM65 0x1c49 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_H67 0x1c4a +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_HM67 0x1c4b +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_Q65 0x1c4c +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_QS67 0x1c4d +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_Q67 0x1c4e +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_QM67 0x1c4f +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_B65 0x1c50 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_C202 0x1c52 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_C204 0x1c54 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_C206 0x1c56 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_H61 0x1c5c #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f -#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE 0x1e03 -#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_HDA 0x1e20 -#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN 0x1e41 -#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX 0x1e5f #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC 0x1d40 +#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40 +#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE 0x1e03 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_HDA 0x1e20 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI 0x1e31 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN 0x1e41 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_B75 0x1e49 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_C216 0x1e53 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_H77 0x1e4A +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_HM70 0x1e5e +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_HM75 0x1e5d +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_HM76 0x1e59 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_HM77 0x1e57 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MBL_SAMPLE 0x1e42 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_NM70 0x1e5f +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_Q75 0x1e48 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_Q77 0x1e47 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_QM77 0x1e55 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_QS77 0x1e56 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_SFF_SAMPLE 0x1e43 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_UM77 0x1e58 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_Z75 0x1e46 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_Z77 0x1e44 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX 0x1e5f +#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN 0x2310 +#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX 0x231f #define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 #define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411 #define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413 @@ -2783,8 +2929,30 @@ #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN 0x3b00 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX 0x3b1f #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB0 0x3c20 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB1 0x3c21 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB2 0x3c22 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB3 0x3c23 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB4 0x3c24 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB5 0x3c25 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB6 0x3c26 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB7 0x3c27 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB8 0x3c2e +#define PCI_DEVICE_ID_INTEL_IOAT_SNB9 0x3c2f +#define PCI_DEVICE_ID_INTEL_UNC_HA 0x3c46 +#define PCI_DEVICE_ID_INTEL_UNC_IMC0 0x3cb0 +#define PCI_DEVICE_ID_INTEL_UNC_IMC1 0x3cb1 +#define PCI_DEVICE_ID_INTEL_UNC_IMC2 0x3cb4 +#define PCI_DEVICE_ID_INTEL_UNC_IMC3 0x3cb5 +#define PCI_DEVICE_ID_INTEL_UNC_QPI0 0x3c41 +#define PCI_DEVICE_ID_INTEL_UNC_QPI1 0x3c42 +#define PCI_DEVICE_ID_INTEL_UNC_R2PCIE 0x3c43 +#define PCI_DEVICE_ID_INTEL_UNC_R3QPI0 0x3c44 +#define PCI_DEVICE_ID_INTEL_UNC_R3QPI1 0x3c45 +#define PCI_DEVICE_ID_INTEL_JAKETOWN_UBOX 0x3ce0 #define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f #define PCI_DEVICE_ID_INTEL_5100_16 0x65f0 +#define PCI_DEVICE_ID_INTEL_5100_19 0x65f3 #define PCI_DEVICE_ID_INTEL_5100_21 0x65f5 #define PCI_DEVICE_ID_INTEL_5100_22 0x65f6 #define PCI_DEVICE_ID_INTEL_5400_ERR 0x4030 @@ -2823,6 +2991,7 @@ #define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601 #define PCI_DEVICE_ID_INTEL_SCH_LPC 0x8119 #define PCI_DEVICE_ID_INTEL_SCH_IDE 0x811a +#define PCI_DEVICE_ID_INTEL_ITC_LPC 0x8186 #define PCI_DEVICE_ID_INTEL_82454GX 0x84c4 #define PCI_DEVICE_ID_INTEL_82450GX 0x84c5 #define PCI_DEVICE_ID_INTEL_82451NX 0x84ca @@ -2905,7 +3074,11 @@ #define PCI_DEVICE_ID_NETMOS_9845 0x9845 #define PCI_DEVICE_ID_NETMOS_9855 0x9855 #define PCI_DEVICE_ID_NETMOS_9865 0x9865 +#define PCI_DEVICE_ID_NETMOS_9900 0x9900 #define PCI_DEVICE_ID_NETMOS_9901 0x9901 +#define PCI_DEVICE_ID_NETMOS_9904 0x9904 +#define PCI_DEVICE_ID_NETMOS_9912 0x9912 +#define PCI_DEVICE_ID_NETMOS_9922 0x9922 #define PCI_VENDOR_ID_3COM_2 0xa727 @@ -2927,3 +3100,5 @@ #define PCI_VENDOR_ID_XEN 0x5853 #define PCI_DEVICE_ID_XEN_PLATFORM 0x0001 + +#define PCI_VENDOR_ID_OCZ 0x1b85 diff --git a/include/pci_rom.h b/include/pci_rom.h new file mode 100644 index 0000000..8b2674c --- /dev/null +++ b/include/pci_rom.h @@ -0,0 +1,58 @@ +/* + * From coreboot file of same name + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _PCI_ROM_H +#define _PCI_ROM_H + +#define PCI_ROM_HDR 0xaa55 +#define PCI_VGA_RAM_IMAGE_START 0xc0000 + +struct pci_rom_header { + uint16_t signature; + uint8_t size; + uint8_t init[3]; + uint8_t reserved[0x12]; + uint16_t data; +}; + +struct pci_rom_data { + uint32_t signature; + uint16_t vendor; + uint16_t device; + uint16_t reserved_1; + uint16_t dlen; + uint8_t drevision; + uint8_t class_lo; + uint16_t class_hi; + uint16_t ilen; + uint16_t irevision; + uint8_t type; + uint8_t indicator; + uint16_t reserved_2; +}; + + /** + * pci_run_vga_bios() - Run the VGA BIOS in an x86 PC + * + * @dev: Video device containing the BIOS + * @int15_handler: Function to call to handle int 0x15 + * @emulate: true to use the x86 emulator, false to run native + */ +int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), bool emulate); + +/** + * board_map_oprom_vendev() - map several PCI IDs to the one the ROM expects + * + * Some VGA option roms are used for several chipsets but they only have one + * PCI ID in their header. If we encounter such an option rom, we need to do + * the mapping ourselves. + * + * @vendev: Vendor and device for the video device + * @return standard vendor and device expected by the ROM + */ +uint32_t board_map_oprom_vendev(uint32_t vendev); + +#endif diff --git a/include/rtc.h b/include/rtc.h index c034966..d11aa8b 100644 --- a/include/rtc.h +++ b/include/rtc.h @@ -50,4 +50,9 @@ void to_tm (int, struct rtc_time *); unsigned long mktime (unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int); +/** + * rtc_init() - Set up the real time clock ready for use + */ +void rtc_init(void); + #endif /* _RTC_H_ */ diff --git a/include/twl4030.h b/include/twl4030.h index f33cd1e..50f8da8 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -651,7 +651,7 @@ void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, /* For initializing power device */ void twl4030_power_init(void); /* For initializing mmc power */ -void twl4030_power_mmc_init(void); +void twl4030_power_mmc_init(int dev_index); /* * LED diff --git a/include/vbe.h b/include/vbe.h new file mode 100644 index 0000000..d405691 --- /dev/null +++ b/include/vbe.h @@ -0,0 +1,103 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * Copyright (c) 2009 Pattrick Hueper <phueper@hueper.net> + * All rights reserved. + * + * SPDX-License-Identifier: BSD-2-Clause + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ +#ifndef _VBE_H +#define _VBE_H + +/* these structs are for input from and output to OF */ +struct __packed screen_info { + u8 display_type; /* 0=NONE, 1= analog, 2=digital */ + u16 screen_width; + u16 screen_height; + /* bytes per line in framebuffer, may be more than screen_width */ + u16 screen_linebytes; + u8 color_depth; /* color depth in bits per pixel */ + u32 framebuffer_address; + u8 edid_block_zero[128]; +}; + +struct __packed screen_info_input { + u8 signature[4]; + u16 size_reserved; + u8 monitor_number; + u16 max_screen_width; + u8 color_depth; +}; + +/* these structs only store the required a subset of the VBE-defined fields */ +struct __packed vbe_info { + char signature[4]; + u16 version; + u8 *oem_string_ptr; + u32 capabilities; + u16 video_mode_list[256]; + u16 total_memory; +}; + +struct __packed vesa_mode_info { + u16 mode_attributes; /* 00 */ + u8 win_a_attributes; /* 02 */ + u8 win_b_attributes; /* 03 */ + u16 win_granularity; /* 04 */ + u16 win_size; /* 06 */ + u16 win_a_segment; /* 08 */ + u16 win_b_segment; /* 0a */ + u32 win_func_ptr; /* 0c */ + u16 bytes_per_scanline; /* 10 */ + u16 x_resolution; /* 12 */ + u16 y_resolution; /* 14 */ + u8 x_charsize; /* 16 */ + u8 y_charsize; /* 17 */ + u8 number_of_planes; /* 18 */ + u8 bits_per_pixel; /* 19 */ + u8 number_of_banks; /* 20 */ + u8 memory_model; /* 21 */ + u8 bank_size; /* 22 */ + u8 number_of_image_pages; /* 23 */ + u8 reserved_page; + u8 red_mask_size; + u8 red_mask_pos; + u8 green_mask_size; + u8 green_mask_pos; + u8 blue_mask_size; + u8 blue_mask_pos; + u8 reserved_mask_size; + u8 reserved_mask_pos; + u8 direct_color_mode_info; + u32 phys_base_ptr; + u32 offscreen_mem_offset; + u16 offscreen_mem_size; + u8 reserved[206]; +}; + +struct vbe_mode_info { + u16 video_mode; + bool valid; + union { + struct vesa_mode_info vesa; + u8 mode_info_block[256]; + }; +}; + +struct vbe_ddc_info { + u8 port_number; /* i.e. monitor number */ + u8 edid_transfer_time; + u8 ddc_level; + u8 edid_block_zero[128]; +}; + +#define VESA_GET_INFO 0x4f00 +#define VESA_GET_MODE_INFO 0x4f01 +#define VESA_SET_MODE 0x4f02 + +struct graphic_device; +int vbe_get_video_info(struct graphic_device *gdev); + +#endif diff --git a/include/video_fb.h b/include/video_fb.h index 6cd4e37..55ec24d 100644 --- a/include/video_fb.h +++ b/include/video_fb.h @@ -40,7 +40,7 @@ /* Export Graphic Driver Control */ /******************************************************************************/ -typedef struct { +typedef struct graphic_device { unsigned int isaBase; unsigned int pciBase; unsigned int dprBase; |