diff options
Diffstat (limited to 'include')
88 files changed, 1151 insertions, 1534 deletions
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index aef39d7..a63a87a 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -32,6 +32,10 @@ typedef struct bd_info { unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ +#ifdef CONFIG_AVR32 + unsigned char bi_phy_id[4]; /* PHY address for ATAG_ETHERNET */ + unsigned long bi_board_number;/* ATAG_BOARDINFO */ +#endif #ifdef CONFIG_ARM unsigned long bi_arm_freq; /* arm frequency */ unsigned long bi_dsp_freq; /* dsp core frequency */ diff --git a/include/common.h b/include/common.h index 9129454..77c55c6 100644 --- a/include/common.h +++ b/include/common.h @@ -253,6 +253,24 @@ int update_flash_size(int flash_size); int arch_early_init_r(void); /** + * Reserve all necessary stacks + * + * This is used in generic board init sequence in common/board_f.c. Each + * architecture could provide this function to tailor the required stacks. + * + * On entry gd->start_addr_sp is pointing to the suggested top of the stack. + * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures + * require only this can leave it untouched. + * + * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective + * positions of the stack. The stack pointer(s) will be set to this later. + * gd->irq_sp is only required, if the architecture needs it. + * + * @return 0 if no error + */ +__weak int arch_reserve_stacks(void); + +/** * Show the DRAM size in a board-specific way * * This is used by boards to display DRAM information in their own way. diff --git a/include/config_defaults.h b/include/config_defaults.h index 4d49315..ad08c1d 100644 --- a/include/config_defaults.h +++ b/include/config_defaults.h @@ -20,10 +20,4 @@ #define CONFIG_ZLIB 1 #define CONFIG_PARTITIONS 1 -#ifndef CONFIG_SPL_BUILD -#define CONFIG_DM_WARN -#define CONFIG_DM_DEVICE_REMOVE -#define CONFIG_DM_STDIO -#endif - #endif diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 49674f4..07a0b3b 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -10,6 +10,10 @@ #ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H #define _CONFIG_CMD_DISTRO_BOOTCMD_H +/* We need the part command */ +#define CONFIG_PARTITION_UUIDS +#define CONFIG_CMD_PART + #define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \ "if " #devtypel " dev ${devnum}; then " \ "setenv devtype " #devtypel "; " \ diff --git a/include/config_uncmd_spl.h b/include/config_uncmd_spl.h index 9cb7a9a..a9106f4 100644 --- a/include/config_uncmd_spl.h +++ b/include/config_uncmd_spl.h @@ -20,5 +20,18 @@ #undef CONFIG_CMD_SNTP #undef CONFIG_CMD_TFTPPUT #undef CONFIG_CMD_TFTPSRV +#undef CONFIG_OF_CONTROL + +#ifndef CONFIG_SPL_DM +#undef CONFIG_DM_SERIAL +#undef CONFIG_DM_GPIO +#undef CONFIG_DM_I2C +#undef CONFIG_DM_SPI +#endif + +#undef CONFIG_DM_WARN +#undef CONFIG_DM_DEVICE_REMOVE +#undef CONFIG_DM_STDIO + #endif /* CONFIG_SPL_BUILD */ #endif /* __CONFIG_UNCMD_SPL_H__ */ diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h deleted file mode 100644 index 0d3cf36..0000000 --- a/include/configs/a320evb.h +++ /dev/null @@ -1,211 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang <ratbert@faraday-tech.com> - * - * Configuation settings for the Faraday A320 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/a320.h> - -/* - * mach-type definition - */ -#define MACH_TYPE_FARADAY 758 -#define CONFIG_MACH_TYPE MACH_TYPE_FARADAY - -/* - * Linux kernel tagged list - */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS - -/* - * CPU and Board Configuration Options - */ -#undef CONFIG_SKIP_LOWLEVEL_INIT - -/* - * Power Management Unit - */ -#define CONFIG_FTPMU010_POWER - -/* - * Timer - */ - -/* - * Real Time Clock - */ -#define CONFIG_RTC_FTRTC010 - -/* - * Serial console configuration - */ - -/* FTUART is a high speed NS 16C550A compatible UART */ -#define CONFIG_BAUDRATE 38400 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_COM1 0x98200000 -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_CLK 18432000 - -/* - * Ethernet - */ -#define CONFIG_FTMAC100 - -#define CONFIG_BOOTDELAY 3 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_PING - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "A320 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) - -/* - * SDRAM controller configuration - */ -#define CONFIG_SYS_FTSDMC020_TP0 (FTSDMC020_TP0_TRAS(2) | \ - FTSDMC020_TP0_TRP(1) | \ - FTSDMC020_TP0_TRCD(1) | \ - FTSDMC020_TP0_TRF(3) | \ - FTSDMC020_TP0_TWR(1) | \ - FTSDMC020_TP0_TCL(2)) - -#define CONFIG_SYS_FTSDMC020_TP1 (FTSDMC020_TP1_INI_PREC(4) | \ - FTSDMC020_TP1_INI_REFT(8) | \ - FTSDMC020_TP1_REF_INTV(0x180)) - -#define CONFIG_SYS_FTSDMC020_BANK0_BSR (FTSDMC020_BANK_ENABLE | \ - FTSDMC020_BANK_DDW_X16 | \ - FTSDMC020_BANK_DSZ_256M | \ - FTSDMC020_BANK_MBW_32 | \ - FTSDMC020_BANK_SIZE_64M) - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) - -/* - * Load address and memory test area should agree with - * board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself. - */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x2000000) - -/* memtest works on 63 MB in DRAM */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x3F00000) - -#define CONFIG_SYS_TEXT_BASE 0 - -/* - * Static memory controller configuration - */ - -#define CONFIG_FTSMC020 -#include <faraday/ftsmc020.h> - -#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ - FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ - FTSMC020_BANK_SIZE_1M | \ - FTSMC020_BANK_MBW_8) - -#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_RBE | \ - FTSMC020_TPR_AST(3) | \ - FTSMC020_TPR_CTW(3) | \ - FTSMC020_TPR_ATI(0xf) | \ - FTSMC020_TPR_AT2(3) | \ - FTSMC020_TPR_WTC(3) | \ - FTSMC020_TPR_AHT(3) | \ - FTSMC020_TPR_TRNA(0xf)) - -#define FTSMC020_BANK1_CONFIG (FTSMC020_BANK_ENABLE | \ - FTSMC020_BANK_BASE(PHYS_FLASH_2) | \ - FTSMC020_BANK_SIZE_32M | \ - FTSMC020_BANK_MBW_32) - -#define FTSMC020_BANK1_TIMING (FTSMC020_TPR_AST(3) | \ - FTSMC020_TPR_CTW(3) | \ - FTSMC020_TPR_ATI(0xf) | \ - FTSMC020_TPR_AT2(3) | \ - FTSMC020_TPR_WTC(3) | \ - FTSMC020_TPR_AHT(3) | \ - FTSMC020_TPR_TRNA(0xf)) - -#define CONFIG_SYS_FTSMC020_CONFIGS { \ - { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ - { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ -} - -/* - * FLASH and environment organization - */ - -/* use CFI framework */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER - -/* support JEDEC */ -#define CONFIG_FLASH_CFI_LEGACY -#define CONFIG_SYS_FLASH_LEGACY_512Kx8 - -#define PHYS_FLASH_1 0x00000000 -#define PHYS_FLASH_2 0x00400000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2, } - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 - -/* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 - -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -#undef CONFIG_SYS_FLASH_EMPTY_INFO - -/* environments */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) -#define CONFIG_ENV_SIZE 0x20000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 2aea899..73e1b0a 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -20,8 +20,10 @@ */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL +#ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_serial_clock() +#endif #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 9c81e31..540e86a 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -143,7 +143,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index 7b4f9cf..35eae76 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -164,7 +164,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 8f3fd0b..a9c064a 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -104,6 +104,10 @@ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY +/* generic board */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R /* * Command line configuration. @@ -158,7 +162,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index bbe0aea..25090a6 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -159,7 +159,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index 8eeb15c..7a1499d 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -11,6 +11,10 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <linux/kconfig.h> + +#define CONFIG_SYS_GENERIC_BOARD + /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ @@ -19,10 +23,10 @@ * and Arches dual (460GT) */ #ifdef CONFIG_CANYONLANDS -#define CONFIG_460EX 1 /* Specific PPC460EX */ +#define CONFIG_460EX /* Specific PPC460EX */ #define CONFIG_HOSTNAME canyonlands #else -#define CONFIG_460GT 1 /* Specific PPC460GT */ +#define CONFIG_460GT /* Specific PPC460GT */ #ifdef CONFIG_GLACIER #define CONFIG_HOSTNAME glacier #else @@ -32,7 +36,7 @@ #endif #endif -#define CONFIG_440 1 +#define CONFIG_440 #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFFF80000 @@ -45,10 +49,10 @@ #define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_BOARD_TYPES 1 /* support board types */ +#define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */ +#define CONFIG_BOARD_EARLY_INIT_R /* Call board_early_init_r */ +#define CONFIG_MISC_INIT_R /* Call misc_init_r */ +#define CONFIG_BOARD_TYPES /* support board types */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -134,7 +138,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */ +#define CONFIG_SYS_FLASH_CFI_AMD_RESET /* Use AMD (Spansion) reset cmd */ #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ @@ -172,9 +176,9 @@ * I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot * code. */ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x50, 0x51} /* SPD i2c spd addresses*/ -#define CONFIG_DDR_ECC 1 /* with ECC support */ +#define CONFIG_DDR_ECC /* with ECC support */ #define CONFIG_DDR_RQDC_FIXED 0x80000038 /* fixed value for RQDC */ #else /* defined(CONFIG_ARCHES) */ @@ -262,8 +266,8 @@ #define CONFIG_4xx_CONFIG_BLOCKSIZE 16 /* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_AD7414 1 /* use AD7414 */ +#define CONFIG_DTT_LM75 /* ON Semi's LM75 */ +#define CONFIG_DTT_AD7414 /* use AD7414 */ #define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ #define CONFIG_SYS_DTT_MAX_TEMP 70 #define CONFIG_SYS_DTT_LOW_TEMP -30 @@ -275,14 +279,14 @@ #if !defined(CONFIG_ARCHES) /* RTC configuration */ -#define CONFIG_RTC_M41T62 1 +#define CONFIG_RTC_M41T62 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 #endif /*----------------------------------------------------------------------- * Ethernet *----------------------------------------------------------------------*/ -#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_IBM_EMAC4_V4 #define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 @@ -322,9 +326,9 @@ #define CONFIG_GPCS_PHY2_ADDR 0xC #endif /* !defined(CONFIG_ARCHES) */ -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ -#define CONFIG_PHY_DYNAMIC_ANEG 1 +#define CONFIG_PHY_RESET /* reset phy upon startup */ +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#define CONFIG_PHY_DYNAMIC_ANEG /*----------------------------------------------------------------------- * USB-OHCI diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h deleted file mode 100644 index 1cb54b3..0000000 --- a/include/configs/cm4008.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2004 - * Greg Ungerer <greg.ungerer@opengear.com>. - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_KS8695 1 /* it is a KS8695 CPU */ -#define CONFIG_CM4008 1 /* it is an OpenGear CM4008 boad */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_DRIVER_KS8695ETH /* use KS8695 ethernet driver */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_KS8695_SERIAL -#define CONFIG_SERIAL1 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_SAVEENV - - -#define CONFIG_BOOTDELAY 0 -#define CONFIG_BOOTARGS "mem=16M console=ttyAM0,115200" -#define CONFIG_BOOTCOMMAND "gofsk 0x02200000" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 16 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -#define CONFIG_SYS_INIT_SP_ADDR 0x00020000 /* lowest 128k of RAM */ - -#define PHYS_FLASH_1 0x02000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h deleted file mode 100644 index adebd4b..0000000 --- a/include/configs/cm41xx.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2005 - * Greg Ungerer <greg.ungerer@opengear.com>. - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_KS8695 1 /* it is a KS8695 CPU */ -#define CONFIG_CM41xx 1 /* it is an OpenGear CM41xx boad */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_DRIVER_KS8695ETH /* use KS8695 ethernet driver */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_KS8695_SERIAL -#define CONFIG_SERIAL1 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_SAVEENV - - -#define CONFIG_BOOTDELAY 0 -#define CONFIG_BOOTARGS "mem=32M console=ttyAM0,115200" -#define CONFIG_BOOTCOMMAND "gofsk 0x02200000" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 16 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -#define CONFIG_SYS_INIT_SP_ADDR 0x00020000 /* lowest 128k of RAM */ - -#define PHYS_FLASH_1 0x02000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 1f64495..4207504 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -21,14 +21,7 @@ #define CONFIG_MACH_TYPE 4273 #ifndef CONFIG_SPL_BUILD -#define CONFIG_DM -#define CONFIG_CMD_DM - -#define CONFIG_DM_GPIO #define CONFIG_CMD_GPIO - -#define CONFIG_DM_SERIAL -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif /* Display information on boot */ diff --git a/include/configs/dkb.h b/include/configs/dkb.h deleted file mode 100644 index 7ffbb14..0000000 --- a/include/configs/dkb.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Lei Wen <leiwen@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_DKB_H -#define __CONFIG_DKB_H - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-TTC DKB" - -/* - * High Level Configuration Options - */ -#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ -#define CONFIG_PANTHEON 1 /* SOC Family Name */ -#define CONFIG_MACH_TTC_DKB 1 /* Machine type */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) -#define CONFIG_NR_DRAM_BANKS_MAX 2 - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include <config_cmd_default.h> -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -#undef CONFIG_ARCH_MISC_INIT - -/* - * Environment variables configurations - */ -#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ -#define CONFIG_ENV_SIZE 0x20000 /* 64k */ - -#endif /* __CONFIG_DKB_H */ diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index 1f3ee55..59676ae 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -17,12 +17,6 @@ #include <linux/sizes.h> #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO @@ -42,7 +36,6 @@ #define CONFIG_ENV_OVERWRITE /* Size of malloc() pool before and after relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20)) /* select serial console configuration */ diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 0ba39a2..3ab8d55 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -126,6 +126,8 @@ #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) /* I2C */ + +/* TODO(sjg@chromium.org): Move these two options to Kconfig */ #define CONFIG_DM_I2C #define CONFIG_DM_I2C_COMPAT #define CONFIG_CMD_I2C diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index 9cef0b0..b1b8e1a 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -24,9 +24,6 @@ #define CONFIG_POWER_TPS65090 /* Enable keyboard */ -#define CONFIG_CROS_EC /* CROS_EC protocol */ -#define CONFIG_CROS_EC_KEYB /* CROS_EC keyboard input */ -#define CONFIG_CMD_CROS_EC #define CONFIG_KEYBOARD #endif diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h index 338d3dc..75bff4c 100644 --- a/include/configs/favr-32-ezkit.h +++ b/include/configs/favr-32-ezkit.h @@ -162,7 +162,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index 73534ad..54eb977 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -62,6 +62,10 @@ #define CONFIG_USART_BASE ATMEL_BASE_USART1 #define CONFIG_USART_ID 1 +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R + /* User serviceable stuff */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS @@ -151,7 +155,6 @@ CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 4f137fc..620f950 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -39,7 +39,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* Init Functions */ #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h index 4f0603a..0bc42f1 100644 --- a/include/configs/hammerhead.h +++ b/include/configs/hammerhead.h @@ -137,7 +137,6 @@ #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00400000) diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h deleted file mode 100644 index 1d78e72..0000000 --- a/include/configs/hawkboard.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Board - */ -#define CONFIG_SYS_USE_NAND 1 - -/* - * SoC Configuration - */ -#define CONFIG_MACH_DAVINCI_HAWK -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ -#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_AIS_CONFIG_FILE "board/$(BOARDDIR)/hawkboard-ais-nand.cfg" - -#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ - DAVINCI_SYSCFG_SUSPSRC_EMAC | \ - DAVINCI_SYSCFG_SUSPSRC_I2C | \ - DAVINCI_SYSCFG_SUSPSRC_SPI1 | \ - DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ - DAVINCI_SYSCFG_SUSPSRC_UART2) - -#if defined(CONFIG_UART_U_BOOT) -#define CONFIG_SYS_TEXT_BASE 0xc1080000 -#elif !defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_TEXT_BASE 0xc1180000 -#endif - -/* Spl */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_LIBGENERIC_SUPPORT /* for udelay and __div64_32 for NAND */ -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-hawk.lds" -#define CONFIG_SPL_TEXT_BASE 0xc1080000 -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR - -/* - * Memory Info - */ -#define CONFIG_SYS_MALLOC_LEN (1*1024*1024) /* malloc() len */ -#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE -#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ -#define CONFIG_SYS_SDRAM_BASE 0xc0000000 -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 -\ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_MONITOR_LEN 0x60000 - -/* memtest start addr */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) - -/* memtest will be run on 16MB */ -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ - -/* - * Serial Driver info - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * Network & Ethernet Configuration - */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 - -/* - * Nand Flash - */ -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_CLE_MASK 0x10 -#define CONFIG_ALE_MASK 0x8 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST /* SPL nand driver configuration */ -#define CFG_DAVINCI_STD_NAND_LAYOUT -#define CONFIG_SYS_NAND_CS 3 -#define CONFIG_SYS_NAND_PAGE_2K -/* Max number of NAND devices */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE_LIST { 0x62000000, } -/* Block 0--not used by bootcode */ -#define CONFIG_ENV_OFFSET 0x0 - -#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0xe0000 -#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1180000 -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ - CONFIG_SYS_NAND_U_BOOT_SIZE - \ - CONFIG_SYS_MALLOC_LEN - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_NAND_ECCPOS { \ - 24, 25, 26, 27, 28, \ - 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ - 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ - 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ - 59, 60, 61, 62, 63 } -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 10 -#define CONFIG_SYS_NAND_OOBSIZE 64 - -#endif /* CONFIG_SYS_USE_NAND */ - -/* USB Configs */ -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_OHCI_DA8XX -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x01E25000 -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "hawkboard" - -/* - * U-Boot general configuration - */ -#define CONFIG_MISC_INIT_R -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_PROMPT "hawkboard > " /* Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* - * Linux Information - */ -#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS \ - "mem=128M console=ttyS2,115200n8 root=/dev/ram0 rw initrd=0xc1180000,"\ - "4M ip=static" -#define CONFIG_BOOTDELAY 3 - -/* - * U-Boot commands - */ -#include <config_cmd_default.h> -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_USB -#define CONFIG_CMD_EXT2 - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_SYS_USE_NAND -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS -#define CONFIG_CMD_NAND -#endif - -#ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 4195fa3..49039d6 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -18,6 +18,8 @@ #define CONFIG_MX31 /* This is a mx31 */ #define CONFIG_MX31_CLK32 32000 +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h deleted file mode 100644 index 8175621..0000000 --- a/include/configs/jadecpu.h +++ /dev/null @@ -1,273 +0,0 @@ -/* - * (C) Copyright 2010 - * Matthias Weisser <weisserm@arcor.de> - * - * Configuation settings for the jadecpu board - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MB86R0x -#define CONFIG_MB86R0x_IOCLK get_bus_freq(0) -#define CONFIG_SYS_TEXT_BASE 0x10000000 - - -#define CONFIG_USE_ARCH_MEMCPY -#define CONFIG_USE_ARCH_MEMSET - -#define MACH_TYPE_JADECPU 2636 - -#define CONFIG_MACH_TYPE MACH_TYPE_JADECPU - -/* - * Environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "gs_fast_boot=setenv bootdelay 5\0" \ - "gs_slow_boot=setenv bootdelay 10\0" \ - "bootcmd=dcache off; mw.l 0x40000000 0 1024; usb start;" \ - "fatls usb 0; fatload usb 0 0x40000000 jadecpu-init.bin;" \ - "bootelf 0x40000000\0" \ - "" - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_BOARD_LATE_INIT - -/* - * Compressions - */ -#define CONFIG_LZO - -/* - * Hardware drivers - */ - -/* - * Serial - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_SYS_NS16550_COM1 0xfffe1000 /* UART 0 */ -#define CONFIG_SYS_NS16550_COM2 0xfff50000 /* UART 2 */ -#define CONFIG_SYS_NS16550_COM3 0xfff51000 /* UART 3 */ -#define CONFIG_SYS_NS16550_COM4 0xfff43000 /* UART 4 */ - -#define CONFIG_CONS_INDEX 4 - -/* - * Ethernet - */ -#define CONFIG_SMC911X -#define CONFIG_SMC911X_BASE 0x02000000 -#define CONFIG_SMC911X_16_BIT - -/* - * Video - */ -#define CONFIG_VIDEO -#define CONFIG_VIDEO_MB86R0xGDC -#define CONFIG_SYS_WHITE_ON_BLACK -#define CONFIG_CFB_CONSOLE -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE -#define CONFIG_VIDEO_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (800*480 + 256*4 + 10*1024) -#define VIDEO_FB_16BPP_WORD_SWAP -#define VIDEO_KBD_INIT_FCT 0 -#define VIDEO_TSTC_FCT serial_stub_tstc -#define VIDEO_GETC_FCT serial_stub_getc - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_XIMG - -#define CONFIG_CMD_BMP -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FAT -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_CACHE - -#define CONFIG_SYS_HUSH_PARSER - -/* USB */ -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0xFFF81000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mb86r0x" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x40000000 /* Start address of DDRRAM */ -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_SP_ADDR 0x01008000 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE 0x10000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (128 * 1024) - -/* - * CFI FLASH driver setup - */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster */ - -#define CONFIG_SYS_LOAD_ADDR 0x40000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024)) -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE) - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "jade> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 - -#define CONFIG_PREBOOT "" - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "delaygs" -#define CONFIG_AUTOBOOT_STOP_STR "stopgs" - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (10 << 20) -#define CONFIG_SYS_MEM_TOP_HIDE (4 << 20) - -/* - * Clock reset generator init - */ -#define CONFIG_SYS_CRG_CRHA_INIT 0xffff -#define CONFIG_SYS_CRG_CRPA_INIT 0xffff -#define CONFIG_SYS_CRG_CRPB_INIT 0xfffe -#define CONFIG_SYS_CRG_CRHB_INIT 0xffff -#define CONFIG_SYS_CRG_CRAM_INIT 0xffef - -/* - * Memory controller settings - */ -#define CONFIG_SYS_MEMC_MCFMODE0_INIT 0x00000001 /* 16bit */ -#define CONFIG_SYS_MEMC_MCFMODE2_INIT 0x00000001 /* 16bit */ -#define CONFIG_SYS_MEMC_MCFMODE4_INIT 0x00000021 /* 16bit, Page*/ -#define CONFIG_SYS_MEMC_MCFTIM0_INIT 0x16191008 -#define CONFIG_SYS_MEMC_MCFTIM2_INIT 0x03061008 -#define CONFIG_SYS_MEMC_MCFTIM4_INIT 0x03061804 -#define CONFIG_SYS_MEMC_MCFAREA0_INIT 0x000000c0 /* 0x0c000000 1MB */ -#define CONFIG_SYS_MEMC_MCFAREA2_INIT 0x00000020 /* 0x02000000 1MB */ -#define CONFIG_SYS_MEMC_MCFAREA4_INIT 0x001f0000 /* 0x10000000 32 MB */ - -/* - * DDR2 controller init settings - */ -#define CONFIG_SYS_DDR2_DRIMS_INIT 0x5555 -#define CONFIG_SYS_CCNT_CDCRC_INIT_1 0x00000002 -#define CONFIG_SYS_CCNT_CDCRC_INIT_2 0x00000003 -#define CONFIG_SYS_DDR2_DRIC1_INIT 0x003f -#define CONFIG_SYS_DDR2_DRIC2_INIT 0x0000 -#define CONFIG_SYS_DDR2_DRCA_INIT 0xc124 /* 512Mbit DDR2SDRAM x 2 */ -#define CONFIG_SYS_DDR2_DRCM_INIT 0x0032 -#define CONFIG_SYS_DDR2_DRCST1_INIT 0x3418 -#define CONFIG_SYS_DDR2_DRCST2_INIT 0x6e32 -#define CONFIG_SYS_DDR2_DRCR_INIT 0x0141 -#define CONFIG_SYS_DDR2_DRCF_INIT 0x0002 -#define CONFIG_SYS_DDR2_DRASR_INIT 0x0001 -#define CONFIG_SYS_DDR2_DROBS_INIT 0x0001 -#define CONFIG_SYS_DDR2_DROABA_INIT 0x0103 -#define CONFIG_SYS_DDR2_DRIBSODT1_INIT 0x003F -#define CONFIG_SYS_DDR2_DROS_INIT 0x0001 - -/* - * DRAM init sequence - */ - -/* PALL Command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_1 0x0017 -#define CONFIG_SYS_DDR2_INIT_DRIC2_1 0x0400 - -/* EMR(2) command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_2 0x0006 -#define CONFIG_SYS_DDR2_INIT_DRIC2_2 0x0000 - -/* EMR(3) command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_3 0x0007 -#define CONFIG_SYS_DDR2_INIT_DRIC2_3 0x0000 - -/* EMR(1) command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_4 0x0005 -#define CONFIG_SYS_DDR2_INIT_DRIC2_4 0x0000 - -/* MRS command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_5 0x0004 -#define CONFIG_SYS_DDR2_INIT_DRIC2_5 0x0532 - -/* PALL command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_6 0x0017 -#define CONFIG_SYS_DDR2_INIT_DRIC2_6 0x0400 - -/* REF command 1 */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_7 0x000f -#define CONFIG_SYS_DDR2_INIT_DRIC2_7 0x0000 - -/* MRS command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_8 0x0004 -#define CONFIG_SYS_DDR2_INIT_DRIC2_8 0x0432 - -/* EMR(1) command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_9 0x0005 -#define CONFIG_SYS_DDR2_INIT_DRIC2_9 0x0380 - -/* EMR(1) command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_10 0x0005 -#define CONFIG_SYS_DDR2_INIT_DRIC2_10 0x0002 - -#endif /* __CONFIG_H */ diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index f780f8b..2ed0855 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -195,7 +195,7 @@ } #ifndef __ASSEMBLY__ -#include <asm/arch-kirkwood/gpio.h> +#include <asm/arch/gpio.h> extern void __set_direction(unsigned pin, int high); void set_sda(int state); void set_scl(int state); diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h index 14fd290..12f9d42 100644 --- a/include/configs/km82xx.h +++ b/include/configs/km82xx.h @@ -34,6 +34,8 @@ #define CONFIG_SYS_TEXT_BASE 0xFE000000 +#define CONFIG_MISC_INIT_R + /* include common defines/options for all Keymile boards */ #include "km/keymile-common.h" #include "km/km-powerpc.h" diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 2874ccc..3dc4da3 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -510,6 +510,30 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" +#define CONFIG_SYS_PCI_64BIT + +#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 +#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ +#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 +#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ + +#define CONFIG_SYS_PCIE_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 +#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 +#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 +#define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */ + +#ifdef CONFIG_PCI +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP +#define CONFIG_E1000 +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 0a0bb5f..a13876b 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -303,6 +303,30 @@ #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" +#define CONFIG_SYS_PCI_64BIT + +#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 +#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ +#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 +#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ + +#define CONFIG_SYS_PCIE_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 +#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 +#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 +#define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */ + +#ifdef CONFIG_PCI +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP +#define CONFIG_E1000 +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 6fe032c..17a1cde 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -13,6 +13,7 @@ #define CONFIG_FSL_LSCH3 #define CONFIG_LS2085A #define CONFIG_GICV3 +#define CONFIG_FSL_TZPC_BP147 /* Link Definitions */ #define CONFIG_SYS_TEXT_BASE 0x30001000 @@ -26,9 +27,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_IDENT_STRING " LS2085A-EMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU" - /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP @@ -209,12 +207,10 @@ #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) #define CONFIG_SYS_LS_MC_FW_IN_NOR #define CONFIG_SYS_LS_MC_FW_ADDR 0x580200000ULL -/* TODO Actual FW length needs to be determined at runtime from FW header */ -#define CONFIG_SYS_LS_MC_FW_LENGTH (4U * 1024 * 1024) #define CONFIG_SYS_LS_MC_DPL_IN_NOR #define CONFIG_SYS_LS_MC_DPL_ADDR 0x5806C0000ULL /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ -#define CONFIG_SYS_LS_MC_DPL_LENGTH 4096 +#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH (256 * 1024) #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0xe00000 /* Carve the MC private DRAM block from the end of DRAM */ @@ -248,7 +244,8 @@ /* Physical Memory Map */ /* fixme: these need to be checked against the board */ #define CONFIG_CHIP_SELECTS_PER_CTRL 4 -#define CONFIG_SYS_CLK_FREQ 133333333 +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 133333333 #define CONFIG_NR_DRAM_BANKS 3 @@ -268,12 +265,14 @@ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581200000\0" \ - "kernel_load=0x806f0000\0" \ + "kernel_load=0xa0000000\0" \ "kernel_size=0x1000000\0" \ "console=ttyAMA0,38400n8\0" -#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ - "earlyprintk=uart8250-8bit,0x21c0600" +#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ + "earlycon=uart8250,mmio,0x21c0600,115200 " \ + "default_hugepagesz=2m hugepagesz=2m " \ + "hugepages=16" #define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ "$kernel_size && bootm $kernel_load" #define CONFIG_BOOTDELAY 1 diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h index 487cd99..a02d694 100644 --- a/include/configs/ls2085a_emu.h +++ b/include/configs/ls2085a_emu.h @@ -9,6 +9,9 @@ #include "ls2085a_common.h" +#define CONFIG_IDENT_STRING " LS2085A-EMU" +#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU" + #define CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR_EMU /* Support emulator */ #define SPD_EEPROM_ADDRESS1 0x51 @@ -17,4 +20,5 @@ #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD on I2C bus 1 */ +#define CONFIG_FSL_DDR_SYNC_REFRESH #endif /* __LS2_EMU_H */ diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2085a_simu.h index 0f40b78..af34f3f 100644 --- a/include/configs/ls2085a_simu.h +++ b/include/configs/ls2085a_simu.h @@ -9,6 +9,9 @@ #include "ls2085a_common.h" +#define CONFIG_IDENT_STRING " LS2085A-SIMU" +#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-SIMU" + /* SMSC 91C111 ethernet configuration */ #define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE (0x2210000) diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index a14bfe3..c354c29 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -56,6 +56,7 @@ * Commands configuration */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_ENV @@ -78,6 +79,9 @@ */ #include "mv-common.h" +/* loading initramfs images without uimage header */ +#define CONFIG_SUPPORT_RAW_INITRD + /* ST M25P40 */ #undef CONFIG_SPI_FLASH_MACRONIX #define CONFIG_SPI_FLASH_STMICRO @@ -125,27 +129,31 @@ "hdpart=0:1\0" \ "kernel_addr=0x00800000\0" \ "ramdisk_addr=0x01000000\0" \ - "fdt_addr=0x01ff0000\0" \ + "fdt_addr=0x00ff0000\0" \ "bootcmd_legacy=ide reset " \ - "&& load ide ${hdpart} 0x00100000 /uImage.buffalo " \ - "&& load ide ${hdpart} 0x00800000 /initrd.buffalo " \ - "&& bootm 0x00100000 0x00800000\0" \ - "bootcmd_net=bootp ${kernel_addr} uImage " \ - "&& tftpboot ${ramdisk_addr} uInitrd " \ + "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ + "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ + "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ + "&& tftpboot ${ramdisk_addr} initrd.img " \ + "&& setenv ramdisk_len ${filesize} " \ "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ - "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "&& bootz ${kernel_addr} " \ + "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ "bootcmd_hdd=ide reset " \ - "&& load ide ${hdpart} ${kernel_addr} /uImage " \ - "&& load ide ${hdpart} ${ramdisk_addr} /uInitrd " \ - "&& load ide ${hdpart} ${fdt_addr} " \ - "/" CONFIG_FDTFILE " " \ - "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ + "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ + "&& setenv ramdisk_len ${filesize} " \ + "&& load ide ${hdpart} ${fdt_addr} /dtb " \ + "&& bootz ${kernel_addr} " \ + "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ "bootcmd_usb=usb start " \ - "&& load usb 0:1 ${kernel_addr} /uImage " \ - "&& load usb 0:1 ${ramdisk_addr} /uInitrd " \ - "&& load usb 0:1 ${fdt_addr} " \ - "/" CONFIG_FDTFILE " " \ - "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ + "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ + "&& setenv ramdisk_len ${filesize} " \ + "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ + "&& bootz ${kernel_addr} " \ + "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ "eraseenv=sf probe 0 " \ "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h index fc7ecfa..2fd3add 100644 --- a/include/configs/mimc200.h +++ b/include/configs/mimc200.h @@ -157,7 +157,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) #define CONFIG_SYS_MALLOC_LEN (1024*1024) -#define CONFIG_SYS_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 0f4bd91..bed071f 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -14,6 +14,8 @@ /* High Level Configuration Options */ #define CONFIG_MX31 1 /* This is a mx31 */ +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index e0528ce..29b72b2 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -28,6 +28,8 @@ #define CONFIG_SYS_PL310_BASE L2_PL310_BASE #endif +#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE + #define CONFIG_MP #define CONFIG_MXC_GPT_HCLK diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index f0f721e..4aa8101 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -25,9 +25,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -#define CONFIG_DM -#define CONFIG_DM_THERMAL -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_IMX6_THERMAL #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 404b922..a290129 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -227,9 +227,6 @@ #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) #endif -#define CONFIG_DM -#define CONFIG_DM_THERMAL -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_IMX6_THERMAL #define CONFIG_CMD_FUSE diff --git a/include/configs/novena.h b/include/configs/novena.h index ea75d2c..074110c 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -116,7 +116,6 @@ #define CONFIG_SYS_MEMTEST_END 0x20000000 #define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* SPL */ #define CONFIG_SPL_FAT_SUPPORT diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 9d5dbdc..8b47537 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -177,8 +177,6 @@ /* I2C */ #define CONFIG_CMD_I2C -#define CONFIG_DM_I2C -#define CONFIG_DM_I2C_COMPAT #define CONFIG_SYS_I2C_S3C24X0 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0 diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 6295ec5..a5e7d8f 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -29,21 +29,24 @@ #define CONFIG_REVISION_TAG 1 -/* Status LED */ +/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */ +#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032) #define CONFIG_STATUS_LED #define CONFIG_BOARD_SPECIFIC_LED #define CONFIG_GPIO_LED #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) #define RED_LED_GPIO 27 -#endif -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) +#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) #define RED_LED_GPIO 16 +#else +#error "status LED not defined for this machine." #endif #define RED_LED_DEV 0 #define STATUS_LED_BIT RED_LED_GPIO #define STATUS_LED_STATE STATUS_LED_ON #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) #define STATUS_LED_BOOT RED_LED_DEV +#endif /* GPIO banks */ #define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */ diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h index a1c980d..f04f061 100644 --- a/include/configs/peach-pi.h +++ b/include/configs/peach-pi.h @@ -43,8 +43,6 @@ #endif #define CONFIG_POWER_TPS65090_EC -#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */ -#define CONFIG_DM_CROS_EC #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_EXYNOS diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 6516a72..b5efbdc 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -43,8 +43,6 @@ #endif #define CONFIG_POWER_TPS65090_EC -#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */ -#define CONFIG_DM_CROS_EC #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_EXYNOS diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h new file mode 100644 index 0000000..3121ac9 --- /dev/null +++ b/include/configs/rpi-common.h @@ -0,0 +1,186 @@ +/* + * (C) Copyright 2012,2015 Stephen Warren + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _RPI_COMMON_H_ +#define _RPI_COMMON_H_ + +#include <linux/sizes.h> + +/* Architecture, CPU, etc.*/ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_BCM2835 +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_SYS_DCACHE_OFF +/* + * 2835 is a SKU in a series for which the 2708 is the first or primary SoC, + * so 2708 has historically been used rather than a dedicated 2835 ID. + * + * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation + * chose to use someone else's previously registered machine ID (3139, MX51_GGC) + * rather than obtaining a valid ID:-/ + */ +#ifndef CONFIG_BCM2836 +#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 +#endif + +/* Memory layout */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_TEXT_BASE 0x00008000 +#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE +/* + * The board really has 256M. However, the VC (VideoCore co-processor) shares + * the RAM, and uses a configurable portion at the top. We tell U-Boot that a + * smaller amount of RAM is present in order to avoid stomping on the area + * the VC uses. + */ +#define CONFIG_SYS_SDRAM_SIZE SZ_128M +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_SDRAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_MALLOC_LEN SZ_4M +#define CONFIG_SYS_MEMTEST_START 0x00100000 +#define CONFIG_SYS_MEMTEST_END 0x00200000 +#define CONFIG_LOADADDR 0x00200000 + +/* Flash */ +#define CONFIG_SYS_NO_FLASH + +/* Devices */ +/* GPIO */ +#define CONFIG_BCM2835_GPIO +/* LCD */ +#define CONFIG_LCD +#define CONFIG_LCD_DT_SIMPLEFB +#define LCD_BPP LCD_COLOR16 +/* + * Prevent allocation of RAM for FB; the real FB address is queried + * dynamically from the VideoCore co-processor, and comes from RAM + * not owned by the ARM CPU. + */ +#define CONFIG_FB_ADDR 0 +#define CONFIG_VIDEO_BCM2835 +#define CONFIG_SYS_WHITE_ON_BLACK + +/* SD/MMC configuration */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_SDHCI +#define CONFIG_MMC_SDHCI_IO_ACCESSORS +#define CONFIG_BCM2835_SDHCI + +#define CONFIG_CMD_USB +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_DWC2 +#ifdef CONFIG_BCM2836 +#define CONFIG_USB_DWC2_REG_ADDR 0x3f980000 +#else +#define CONFIG_USB_DWC2_REG_ADDR 0x20980000 +#endif +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_MISC_INIT_R +#endif + +/* Console UART */ +#define CONFIG_PL01X_SERIAL +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 + +/* Console configuration */ +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Environment */ +#define CONFIG_ENV_SIZE SZ_16K +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0:1" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_FAT_WRITE +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_SYS_LOAD_ADDR 0x1000000 +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* Shell */ +#define CONFIG_SYS_MAXARGS 8 +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_COMMAND_HISTORY + +/* Commands */ +#include <config_cmd_default.h> +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_MMC +#define CONFIG_PARTITION_UUIDS +#define CONFIG_CMD_PART + +/* Device tree support */ +#define CONFIG_OF_BOARD_SETUP +/* ATAGs support for bootm/bootz */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG + +#include <config_distro_defaults.h> + +/* Some things don't make sense on this HW or yet */ +#undef CONFIG_CMD_FPGA + +/* Environment */ +#define ENV_DEVICE_SETTINGS \ + "stdin=serial,lcd\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" + +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it low in memory to avoid conflicts. + * + * pxefile_addr_r can be pretty much anywhere that doesn't conflict with + * something else. Put it low in memory to avoid conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define ENV_MEM_LAYOUT_SETTINGS \ + "scriptaddr=0x00000000\0" \ + "pxefile_addr_r=0x00100000\0" \ + "kernel_addr_r=0x01000000\0" \ + "fdt_addr_r=0x02000000\0" \ + "ramdisk_addr_r=0x02100000\0" \ + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> + +#define CONFIG_EXTRA_ENV_SETTINGS \ + ENV_DEVICE_SETTINGS \ + ENV_MEM_LAYOUT_SETTINGS \ + BOOTENV + +#define CONFIG_BOOTDELAY 2 + +#endif diff --git a/include/configs/rpi.h b/include/configs/rpi.h index c94f411..ab2f4db 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -1,193 +1,12 @@ /* - * (C) Copyright 2012 Stephen Warren + * (C) Copyright 2012,2015 Stephen Warren * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __CONFIG_H #define __CONFIG_H -#include <linux/sizes.h> - -/* Architecture, CPU, etc.*/ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_BCM2835 -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_DCACHE_OFF -/* - * 2835 is a SKU in a series for which the 2708 is the first or primary SoC, - * so 2708 has historically been used rather than a dedicated 2835 ID. - */ -#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 - -/* Enable driver model */ -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL - -/* Memory layout */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_TEXT_BASE 0x00008000 -#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -/* - * The board really has 256M. However, the VC (VideoCore co-processor) shares - * the RAM, and uses a configurable portion at the top. We tell U-Boot that a - * smaller amount of RAM is present in order to avoid stomping on the area - * the VC uses. - */ -#define CONFIG_SYS_SDRAM_SIZE SZ_128M -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_SDRAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_MALLOC_LEN SZ_4M -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x00200000 -#define CONFIG_LOADADDR 0x00200000 - -/* Flash */ -#define CONFIG_SYS_NO_FLASH - -/* Devices */ -/* GPIO */ -#define CONFIG_BCM2835_GPIO -/* LCD */ -#define CONFIG_LCD -#define CONFIG_LCD_DT_SIMPLEFB -#define LCD_BPP LCD_COLOR16 -/* - * Prevent allocation of RAM for FB; the real FB address is queried - * dynamically from the VideoCore co-processor, and comes from RAM - * not owned by the ARM CPU. - */ -#define CONFIG_FB_ADDR 0 -#define CONFIG_VIDEO_BCM2835 -#define CONFIG_SYS_WHITE_ON_BLACK - -/* SD/MMC configuration */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_SDHCI -#define CONFIG_MMC_SDHCI_IO_ACCESSORS -#define CONFIG_BCM2835_SDHCI - -#define CONFIG_CMD_USB -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_DWC2 -#define CONFIG_USB_DWC2_REG_ADDR 0x20980000 -#define CONFIG_USB_STORAGE -#define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_ETHER_SMSC95XX -#define CONFIG_MISC_INIT_R -#endif - -/* Console UART */ -#define CONFIG_PL01X_SERIAL -#define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 115200 - -/* Console configuration */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -/* Environment */ -#define CONFIG_ENV_SIZE SZ_16K -#define CONFIG_ENV_IS_IN_FAT -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_DEVICE_AND_PART "0:1" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_FAT_WRITE -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_SYS_LOAD_ADDR 0x1000000 -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* Shell */ -#define CONFIG_SYS_MAXARGS 8 -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_COMMAND_HISTORY - -/* Commands */ -#include <config_cmd_default.h> -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_MMC -#define CONFIG_PARTITION_UUIDS -#define CONFIG_CMD_PART - -/* Device tree support */ -#define CONFIG_OF_BOARD_SETUP -/* ATAGs support for bootm/bootz */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG - -#include <config_distro_defaults.h> - -/* Some things don't make sense on this HW or yet */ -#undef CONFIG_CMD_FPGA - -/* Environment */ -#define ENV_DEVICE_SETTINGS \ - "stdin=serial,lcd\0" \ - "stdout=serial,lcd\0" \ - "stderr=serial,lcd\0" - -/* - * Memory layout for where various images get loaded by boot scripts: - * - * scriptaddr can be pretty much anywhere that doesn't conflict with something - * else. Put it low in memory to avoid conflicts. - * - * pxefile_addr_r can be pretty much anywhere that doesn't conflict with - * something else. Put it low in memory to avoid conflicts. - * - * kernel_addr_r must be within the first 128M of RAM in order for the - * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will - * decompress itself to 0x8000 after the start of RAM, kernel_addr_r - * should not overlap that area, or the kernel will have to copy itself - * somewhere else before decompression. Similarly, the address of any other - * data passed to the kernel shouldn't overlap the start of RAM. Pushing - * this up to 16M allows for a sizable kernel to be decompressed below the - * compressed load address. - * - * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for - * the compressed kernel to be up to 16M too. - * - * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows - * for the FDT/DTB to be up to 1M, which is hopefully plenty. - */ -#define ENV_MEM_LAYOUT_SETTINGS \ - "scriptaddr=0x00000000\0" \ - "pxefile_addr_r=0x00100000\0" \ - "kernel_addr_r=0x01000000\0" \ - "fdt_addr_r=0x02000000\0" \ - "ramdisk_addr_r=0x02100000\0" \ - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(USB, usb, 0) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) -#include <config_distro_bootcmd.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - ENV_DEVICE_SETTINGS \ - ENV_MEM_LAYOUT_SETTINGS \ - BOOTENV - -#define CONFIG_BOOTDELAY 2 +#include "rpi-common.h" #endif diff --git a/include/configs/rpi_2.h b/include/configs/rpi_2.h new file mode 100644 index 0000000..2e7e74f --- /dev/null +++ b/include/configs/rpi_2.h @@ -0,0 +1,15 @@ +/* + * (C) Copyright 2012,2015 Stephen Warren + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BCM2836 + +#include "rpi-common.h" + +#endif diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index dfa2e07..8fadc68 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -40,7 +40,6 @@ #define CONFIG_CMDLINE_EDITING /* Size of malloc() pool before and after relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20)) /* @@ -290,9 +289,5 @@ #define CONFIG_OF_LIBFDT #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL #endif /* __CONFIG_H */ diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 5a0ab28..5dab61d 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -227,7 +227,7 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/u-boot-spl.lds #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index cccc1ed..bd288be 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -274,7 +274,7 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/u-boot-spl.lds #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index e9d3f32..febbfb6 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -23,15 +23,6 @@ #define CONFIG_BOOTSTAGE #define CONFIG_BOOTSTAGE_REPORT -#define CONFIG_CMD_DEMO -#define CONFIG_CMD_DM -#define CONFIG_DM_DEMO -#define CONFIG_DM_DEMO_SIMPLE -#define CONFIG_DM_DEMO_SHAPE -#define CONFIG_DM_GPIO -#define CONFIG_DM_TEST -#define CONFIG_DM_SERIAL -#define CONFIG_DM_CROS_EC #define CONFIG_SYS_STDIO_DEREGISTER @@ -69,7 +60,6 @@ /* * Size of malloc() pool, before and after relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_MALLOC_F_ADDR 0x0010000 #define CONFIG_SYS_MALLOC_LEN (32 << 20) /* 32MB */ @@ -96,8 +86,6 @@ #define CONFIG_CMD_SF_TEST #define CONFIG_CMD_SPI #define CONFIG_SPI_FLASH -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SPI_FLASH_EON #define CONFIG_SPI_FLASH_GIGADEVICE @@ -108,7 +96,6 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_WINBOND -#define CONFIG_DM_I2C #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C_SANDBOX #define CONFIG_I2C_EDID @@ -154,9 +141,6 @@ #define CONFIG_BOOTARGS "" -#define CONFIG_CROS_EC -#define CONFIG_CMD_CROS_EC -#define CONFIG_CROS_EC_SANDBOX #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_BOARD_LATE_INIT @@ -179,7 +163,6 @@ #define LCD_BPP LCD_COLOR16 #define CONFIG_LCD_BMP_RLE8 -#define CONFIG_CROS_EC_KEYB #define CONFIG_KEYBOARD #define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial,cros-ec-keyb\0" \ diff --git a/include/configs/silk.h b/include/configs/silk.h new file mode 100644 index 0000000..a4235e9 --- /dev/null +++ b/include/configs/silk.h @@ -0,0 +1,117 @@ +/* + * include/configs/silk.h + * This file is silk board configuration. + * + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __SILK_H +#define __SILK_H + +#undef DEBUG +#define CONFIG_R8A7794 +#define CONFIG_RMOBILE_BOARD_STRING "Silk" + +#include "rcar-gen2-common.h" + +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x70000000 +#else +#define CONFIG_SYS_TEXT_BASE 0xE6304000 +#endif + +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC +#else +#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC +#endif +#define STACK_AREA_SIZE 0xC000 +#define LOW_LEVEL_MERAM_STACK \ + (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + +/* MEMORY */ +#define RCAR_GEN2_SDRAM_BASE 0x40000000 +#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024) +#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE +#define CONFIG_CONS_SCIF2 +#define CONFIG_SCIF_USE_EXT_CLK + +/* FLASH */ +#define CONFIG_SPI +#define CONFIG_SPI_FLASH_BAR +#define CONFIG_SH_QSPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_QUAD +#define CONFIG_SYS_NO_FLASH + +/* SH Ether */ +#define CONFIG_NET_MULTI +#define CONFIG_SH_ETHER +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x1 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* Board Clock */ +#define RMOBILE_XTAL_CLK 20000000u +#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK +#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */ +#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) +#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24) +#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */ + +#define CONFIG_SYS_TMU_CLK_DIV 4 + +/* i2c */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SH +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3 +#define CONFIG_SYS_I2C_SH_SPEED0 400000 +#define CONFIG_SYS_I2C_SH_SPEED1 400000 +#define CONFIG_SYS_I2C_SH_SPEED2 400000 +#define CONFIG_SH_I2C_DATA_HIGH 4 +#define CONFIG_SH_I2C_DATA_LOW 5 +#define CONFIG_SH_I2C_CLOCK 10000000 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ + +/* USB */ +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_RMOBILE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +/* MMCIF */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_MMC +#define CONFIG_SH_MMCIF +#define CONFIG_SH_MMCIF_ADDR 0xee200000 +#define CONFIG_SH_MMCIF_CLK 48000000 + +/* Module stop status bits */ +/* INTC-RT */ +#define CONFIG_SMSTP0_ENA 0x00400000 +/* MSIF */ +#define CONFIG_SMSTP2_ENA 0x00002000 +/* INTC-SYS, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 +/* SCIF2 */ +#define CONFIG_SMSTP7_ENA 0x00080000 + +#endif /* __SILK_H */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 982d0dc..080fc3a 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -48,9 +48,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) -/* Small malloc pool before relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) - /* * select serial console configuration */ @@ -224,9 +221,5 @@ #define CONFIG_OF_LIBFDT #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL #endif /* __CONFIG_H */ diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 9fa644f..6c68596 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -21,11 +21,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* CPU */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/snow.h b/include/configs/snow.h index ce6676e..fe802f2 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -20,9 +20,7 @@ #include <configs/exynos5-dt-common.h> -#define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */ #define CONFIG_POWER_TPS65090_I2C -#define CONFIG_DM_CROS_EC #define CONFIG_BOARD_COMMON #define CONFIG_ARCH_EARLY_INIT_R diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 6b1f967..ee227fe 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -190,10 +190,6 @@ unsigned int cm_get_l4_sp_clk_hz(void); * QSPI support */ #ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */ -#define CONFIG_CMD_DM -#define CONFIG_DM -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH #define CONFIG_CADENCE_QSPI /* Enable multiple SPI NOR flash manufacturers */ #define CONFIG_SPI_FLASH /* SPI flash subsystem */ @@ -210,9 +206,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #endif #ifdef CONFIG_OF_CONTROL /* DW SPI is controlled via DT */ -#define CONFIG_CMD_DM -#define CONFIG_DM -#define CONFIG_DM_SPI #define CONFIG_DESIGNWARE_SPI #define CONFIG_CMD_SPI #endif diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index fd9bd63..156e0fa 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -28,21 +28,10 @@ (PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE) #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024) -#define CONFIG_SYS_MALLOC_F_LEN 0x2000 -#define CONFIG_DM /* serial port (PL011) configuration */ #define CONFIG_BAUDRATE 115200 -#ifdef CONFIG_DM -#define CONFIG_DM_SERIAL #define CONFIG_PL01X_SERIAL -#else -#define CONFIG_SYS_SERIAL0 0x80406000 -#define CONFIG_CONS_INDEX 0 -#define CONFIG_PL011_SERIAL -#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0} -#define CONFIG_PL011_CLOCK (2700 * 1000) -#endif /* user interface */ #define CONFIG_SYS_PROMPT "STV0991> " diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index 87d269b..1537e53 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -13,8 +13,6 @@ */ #define CONFIG_CLK_FULL_SPEED 1008000000 -#define CONFIG_MACH_TYPE 4104 - #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 @@ -25,4 +23,6 @@ */ #include <configs/sunxi-common.h> +#define CONFIG_MACH_TYPE (4104 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28)) + #endif /* __CONFIG_H */ diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index 52e3a6f..e755531 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -13,8 +13,6 @@ */ #define CONFIG_CLK_FULL_SPEED 1008000000 -#define CONFIG_MACH_TYPE 4138 - #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 @@ -25,4 +23,6 @@ */ #include <configs/sunxi-common.h> +#define CONFIG_MACH_TYPE (4138 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28)) + #endif /* __CONFIG_H */ diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 7cd7890..f817f73 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -14,8 +14,6 @@ */ #define CONFIG_CLK_FULL_SPEED 912000000 -#define CONFIG_MACH_TYPE 4283 - #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 @@ -31,4 +29,6 @@ */ #include <configs/sunxi-common.h> +#define CONFIG_MACH_TYPE (4283 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28)) + #endif /* __CONFIG_H */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index cea52db..bd7d049 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -13,26 +13,36 @@ #ifndef _SUNXI_COMMON_CONFIG_H #define _SUNXI_COMMON_CONFIG_H +#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT +/* + * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the + * expense of restricting some features, so the regular machine id values can + * be used. + */ +# define CONFIG_MACH_TYPE_COMPAT_REV 0 +#else +/* + * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. + * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass + * beyond the machine id check. + */ +# define CONFIG_MACH_TYPE_COMPAT_REV 1 +#endif + /* * High Level Configuration Options */ #define CONFIG_SUNXI /* sunxi family */ #ifdef CONFIG_SPL_BUILD -#ifndef CONFIG_SPL_FEL #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ #endif -#endif #include <asm/arch/cpu.h> /* get chip and board defs */ #define CONFIG_SYS_TEXT_BASE 0x4a000000 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM) -# define CONFIG_CMD_DM -# define CONFIG_DM_GPIO -# define CONFIG_DM_SERIAL # define CONFIG_DW_SERIAL -# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif /* @@ -85,9 +95,6 @@ #define CONFIG_CMD_MEMORY #define CONFIG_CMD_SETEXPR -#define CONFIG_PARTITION_UUIDS -#define CONFIG_CMD_PART - #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG @@ -149,10 +156,10 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_BOARD_LOAD_IMAGE + #ifdef CONFIG_SPL_FEL -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds" -#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi" #define CONFIG_SPL_TEXT_BASE 0x2000 #define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */ @@ -192,6 +199,22 @@ #define CONFIG_SYS_I2C_MVTWSI #define CONFIG_SYS_I2C_SPEED 400000 #define CONFIG_SYS_I2C_SLAVE 0x7f + +#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) +#define CONFIG_SYS_I2C_SOFT +#define CONFIG_SYS_I2C_SOFT_SPEED 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 +#define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ +#define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ +/* We use pin names in Kconfig and sunxi_name_to_gpio() */ +#define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda +#define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl +#ifndef __ASSEMBLY__ +extern int soft_i2c_gpio_sda; +extern int soft_i2c_gpio_scl; +#endif +#endif + #define CONFIG_CMD_I2C /* PMU */ @@ -203,6 +226,20 @@ #define CONFIG_CONS_INDEX 1 /* UART0 */ #endif +#if CONFIG_CONS_INDEX == 1 +#ifdef CONFIG_MACH_SUN9I +#define OF_STDOUT_PATH "/soc/serial@07000000:115200" +#else +#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" +#endif +#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) +#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" +#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) +#define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" +#else +#error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. +#endif + /* GPIO */ #define CONFIG_SUNXI_GPIO #define CONFIG_SPL_GPIO_SUPPORT @@ -210,10 +247,10 @@ #ifdef CONFIG_VIDEO /* - * The amount of RAM that is reserved for the FB. This will not show up as - * RAM to the kernel, but will be reclaimed by a KMS driver in future. + * The amount of RAM to keep free at the top of RAM when relocating u-boot, + * to use as framebuffer. This must be a multiple of 4096. */ -#define CONFIG_SUNXI_FB_SIZE (9 << 20) +#define CONFIG_SUNXI_MAX_FB_SIZE (9 << 20) /* Do we want to initialize a simple FB? */ #define CONFIG_VIDEO_DT_SIMPLEFB @@ -231,8 +268,6 @@ /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ #define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF) - /* To be able to hook simplefb into dt */ #ifdef CONFIG_VIDEO_DT_SIMPLEFB #define CONFIG_OF_BOARD_SETUP diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 8f1e370..005fc6a 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -18,16 +18,6 @@ #include <asm/arch/tegra.h> /* get chip and board defs */ -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#ifndef CONFIG_SPL_BUILD -#define CONFIG_DM_SERIAL -#endif -#define CONFIG_DM_SPI -#define CONFIG_DM_SPI_FLASH -#define CONFIG_DM_I2C - #define CONFIG_SYS_TIMER_RATE 1000000 #define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE @@ -47,7 +37,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */ diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 598526b..20a55f4 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -20,14 +20,7 @@ #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC #ifndef CONFIG_SPL_BUILD -#ifndef CONFIG_DM -# define CONFIG_DM -#endif -# define CONFIG_CMD_DM -# define CONFIG_DM_GPIO -# define CONFIG_DM_SERIAL # define CONFIG_OMAP_SERIAL -# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif #include <asm/arch/omap.h> diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 3c634ee..840e108 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -19,12 +19,7 @@ #include <asm/arch/omap3.h> #ifndef CONFIG_SPL_BUILD -# define CONFIG_DM -# define CONFIG_CMD_DM -# define CONFIG_DM_GPIO -# define CONFIG_DM_SERIAL # define CONFIG_OMAP_SERIAL -# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif /* The chip has SDRC controller */ diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h deleted file mode 100644 index 00a1a9e..0000000 --- a/include/configs/tnetv107x_evm.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com> - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <linux/sizes.h> -#include <asm/arch/hardware.h> -#include <asm/arch/clock.h> - -/* Architecture, CPU, etc */ -#define CONFIG_TNETV107X -#define CONFIG_TNETV107X_EVM -#define CONFIG_TNETV107X_WATCHDOG -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_DISABLE_TCM -#define CONFIG_PERIPORT_REMAP -#define CONFIG_PERIPORT_BASE 0x2000000 -#define CONFIG_PERIPORT_SIZE 0x10 -#define CONFIG_SYS_CLK_FREQ clk_get_rate(TNETV107X_LPSC_ARM) - -#define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0) - -#define CONFIG_PLL_SYS_EXT_FREQ 25000000 -#define CONFIG_PLL_TDM_EXT_FREQ 19200000 -#define CONFIG_PLL_ETH_EXT_FREQ 25000000 - -/* Memory Info */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) -#define PHYS_SDRAM_1 TNETV107X_DDR_EMIF_DATA_BASE -#define PHYS_SDRAM_1_SIZE 0x04000000 -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* Serial Driver Info */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 TNETV107X_UART1_BASE -#define CONFIG_SYS_NS16550_CLK clk_get_rate(TNETV107X_LPSC_UART1) -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Flash and environment info */ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (SZ_128K) -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_NAND_1BIT_ECC -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE -#define CONFIG_SYS_NAND_MASK_CLE 0x10 -#define CONFIG_SYS_NAND_MASK_ALE 0x8 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_PARTITIONS -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define CONFIG_JFFS2_NAND -#define CONFIG_ENV_OFFSET 0x180000 - -/* - * davinci_nand is a bit of a misnomer since this particular EMIF block is - * commonly used across multiple TI devices. Unfortunately, this misnomer - * (amongst others) carries forward into the kernel too. Consequently, if we - * use a different device name here, the mtdparts variable won't be usable as - * a kernel command-line argument. - */ -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" -#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ - "1536k(uboot)ro," \ - "128k(params)ro," \ - "4m(kernel)," \ - "-(filesystem)" - -/* General U-Boot configuration */ -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_SYS_PROMPT "U-Boot > " -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + \ - 0x700000) -#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=32M console=ttyS1,115200n8 " \ - "root=/dev/mmcblk0p1 rw noinitrd" -#define CONFIG_BOOTCOMMAND "" -#define CONFIG_BOOTDELAY 1 - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_EDITENV -#define CONFIG_CMD_IMI -#define CONFIG_CMD_ITEST -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_SOURCE -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NAND -#define CONFIG_CMD_JFFS2 - -#endif /* __CONFIG_H */ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 9420e6b..3f738fb 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -80,8 +80,6 @@ #define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE #define CONFIG_SMC911X_32_BIT -#define CONFIG_SYS_MALLOC_F_LEN 0x2000 - /*----------------------------------------------------------------------- * MMU and Cache Setting *----------------------------------------------------------------------*/ @@ -192,8 +190,6 @@ #define CONFIG_FAT_WRITE #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_DM - /* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 062e6c2..994874c 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -22,11 +22,6 @@ #define CONFIG_DISPLAY_BOARDINFO_LATE #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DM -#define CONFIG_CMD_DM -#define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL - #define CONFIG_LMB #define CONFIG_OF_LIBFDT @@ -192,7 +187,6 @@ #define CONFIG_SYS_STACK_SIZE (32 * 1024) #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MALLOC_LEN 0x200000 -#define CONFIG_SYS_MALLOC_F_LEN (2 << 10) /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 356ac88..342fa2c 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -15,6 +15,8 @@ #define CONFIG_MX25 #define CONFIG_SYS_TEXT_BASE 0xA0000000 +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_SYS_TIMER_RATE 32768 #define CONFIG_SYS_TIMER_COUNTER \ (&((struct gpt_regs *)IMX_GPT1_BASE)->counter) diff --git a/include/debug_uart.h b/include/debug_uart.h new file mode 100644 index 0000000..f56797b --- /dev/null +++ b/include/debug_uart.h @@ -0,0 +1,139 @@ +/* + * Early debug UART support + * + * (C) Copyright 2014 Google, Inc + * Writte by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _DEBUG_UART_H +#define _DEBUG_UART_H + +#include <linux/linkage.h> + +/* + * The debug UART is intended for use very early in U-Boot to debug problems + * when an ICE or other debug mechanism is not available. + * + * To use it you should: + * - Make sure your UART supports this interface + * - Enable CONFIG_DEBUG_UART + * - Enable the CONFIG for your UART to tell it to provide this interface + * (e.g. CONFIG_DEBUG_UART_NS16550) + * - Define the required settings as needed (see below) + * - Call debug_uart_init() before use + * - Call printch() to output a character + * + * Depending on your platform it may be possible to use this UART before a + * stack is available. + * + * If your UART does not support this interface you can probably add support + * quite easily. Remember that you cannot use driver model and it is preferred + * to use no stack. + * + * You must not use this UART once driver model is working and the serial + * drivers are up and running (done in serial_init()). Otherwise the drivers + * may conflict and you will get strange output. + * + * + * To enable the debug UART in your serial driver: + * + * - #include <debug_uart.h> + * - Define debug_uart_init(), trying to avoid using the stack + * - Define _debug_uart_putc() as static inline (avoiding stack usage) + * - Immediately afterwards, add DEBUG_UART_FUNCS to define the rest of the + * functionality (printch(), etc.) + */ + +/** + * debug_uart_init() - Set up the debug UART ready for use + * + * This sets up the UART with the correct baud rate, etc. + * + * Available CONFIG is: + * + * - CONFIG_DEBUG_UART_BASE: Base address of UART + * - CONFIG_BAUDRATE: Requested baud rate + * - CONFIG_DEBUG_UART_CLOCK: Input clock for UART + */ +void debug_uart_init(void); + +/** + * printch() - Output a character to the debug UART + * + * @ch: Character to output + */ +asmlinkage void printch(int ch); + +/** + * printascii() - Output an ASCII string to the debug UART + * + * @str: String to output + */ +asmlinkage void printascii(const char *str); + +/** + * printhex2() - Output a 2-digit hex value + * + * @value: Value to output + */ +asmlinkage void printhex2(uint value); + +/** + * printhex4() - Output a 4-digit hex value + * + * @value: Value to output + */ +asmlinkage void printhex4(uint value); + +/** + * printhex8() - Output a 8-digit hex value + * + * @value: Value to output + */ +asmlinkage void printhex8(uint value); + +/* + * Now define some functions - this should be inserted into the serial driver + */ +#define DEBUG_UART_FUNCS \ + asmlinkage void printch(int ch) \ + { \ + _debug_uart_putc(ch); \ + } \ +\ + asmlinkage void printascii(const char *str) \ + { \ + while (*str) \ + _debug_uart_putc(*str++); \ + } \ +\ + static inline void printhex1(uint digit) \ + { \ + digit &= 0xf; \ + _debug_uart_putc(digit > 9 ? digit - 10 + 'a' : digit + '0'); \ + } \ +\ + static inline void printhex(uint value, int digits) \ + { \ + while (digits-- > 0) \ + printhex1(value >> (4 * digits)); \ + } \ +\ + asmlinkage void printhex2(uint value) \ + { \ + printhex(value, 2); \ + } \ +\ + asmlinkage void printhex4(uint value) \ + { \ + printhex(value, 4); \ + } \ +\ + asmlinkage void printhex8(uint value) \ + { \ + printhex(value, 8); \ + } + +#endif diff --git a/include/dm/device-internal.h b/include/dm/device-internal.h index f0cc794..e2418fe 100644 --- a/include/dm/device-internal.h +++ b/include/dm/device-internal.h @@ -101,7 +101,11 @@ static inline int device_remove(struct udevice *dev) { return 0; } * @dev: Pointer to device to unbind * @return 0 if OK, -ve on error */ +#ifdef CONFIG_DM_DEVICE_REMOVE int device_unbind(struct udevice *dev); +#else +static inline int device_unbind(struct udevice *dev) { return 0; } +#endif #ifdef CONFIG_DM_DEVICE_REMOVE void device_free(struct udevice *dev); diff --git a/include/dm/device.h b/include/dm/device.h index 81afa8c..7a48eb8 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -12,6 +12,7 @@ #define _DM_DEVICE_H #include <dm/uclass-id.h> +#include <fdtdec.h> #include <linker_lists.h> #include <linux/list.h> @@ -351,4 +352,13 @@ int device_find_first_child(struct udevice *parent, struct udevice **devp); */ int device_find_next_child(struct udevice **devp); +/** + * dev_get_addr() - Get the reg property of a device + * + * @dev: Pointer to a device + * + * @return addr + */ +fdt_addr_t dev_get_addr(struct udevice *dev); + #endif diff --git a/include/dm/platform_data/serial_sh.h b/include/dm/platform_data/serial_sh.h new file mode 100644 index 0000000..0271ad6 --- /dev/null +++ b/include/dm/platform_data/serial_sh.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * Copyright (c) 2014 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __serial_sh_h +#define __serial_sh_h + +enum sh_clk_mode { + INT_CLK, + EXT_CLK, +}; + +enum sh_serial_type { + PORT_SCI, + PORT_SCIF, + PORT_SCIFA, + PORT_SCIFB, +}; + +/* + * Information about SCIF port + * + * @base: Register base address + * @clk: Input clock rate, used for calculating the baud rate divisor + * @clk_mode: Clock mode, set internal (INT) or external (EXT) + * @type: Type of SCIF + */ +struct sh_serial_platdata { + unsigned long base; + unsigned int clk; + enum sh_clk_mode clk_mode; + enum sh_serial_type type; +}; +#endif /* __serial_sh_h */ diff --git a/include/dwmmc.h b/include/dwmmc.h index 109f7c8..86a5491 100644 --- a/include/dwmmc.h +++ b/include/dwmmc.h @@ -141,9 +141,9 @@ struct dwmci_host { int dev_index; int dev_id; int buswidth; - u32 clksel_val; u32 fifoth_val; struct mmc *mmc; + void *priv; void (*clksel)(struct dwmci_host *host); void (*board_init)(struct dwmci_host *host); diff --git a/include/fdt_support.h b/include/fdt_support.h index 1f19fe4..ae5e8a3 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -100,7 +100,7 @@ void ft_pci_setup(void *blob, bd_t *bd); */ int ft_system_setup(void *blob, bd_t *bd); -void set_working_fdt_addr(void *addr); +void set_working_fdt_addr(ulong addr); int fdt_shrink_to_minimum(void *blob); int fdt_increase_size(void *fdt, int add_len); diff --git a/include/fsl-mc/fsl_dpmng.h b/include/fsl-mc/fsl_dpmng.h new file mode 100644 index 0000000..c2e1ddd --- /dev/null +++ b/include/fsl-mc/fsl_dpmng.h @@ -0,0 +1,121 @@ +/* Copyright 2014 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/*! + * @file fsl_dpmng.h + * @brief Management Complex General API + */ + +#ifndef __FSL_DPMNG_H +#define __FSL_DPMNG_H + +/*! + * @Group grp_dpmng Management Complex General API + * + * @brief Contains general API for the Management Complex firmware + * @{ + */ + +struct fsl_mc_io; + +/** + * @brief Management Complex firmware version information + */ +#define MC_VER_MAJOR 4 +#define MC_VER_MINOR 0 + +struct mc_version { + uint32_t major; + /*!< Major version number: incremented on API compatibility changes */ + uint32_t minor; + /*!< Minor version number: incremented on API additions (that are + * backward compatible); reset when major version is incremented + */ + uint32_t revision; + /*!< Internal revision number: incremented on implementation changes + * and/or bug fixes that have no impact on API + */ +}; + +/** + * @brief Retrieves the Management Complex firmware version information + * + * @param[in] mc_io Pointer to opaque I/O object + * @param[out] mc_ver_info Pointer to version information structure + * + * @returns '0' on Success; Error code otherwise. + */ +int mc_get_version(struct fsl_mc_io *mc_io, struct mc_version *mc_ver_info); + +/** + * @brief Resets an AIOP tile + * + * @param[in] mc_io Pointer to opaque I/O object + * @param[in] container_id AIOP container ID + * @param[in] aiop_tile_id AIOP tile ID to reset + * + * @returns '0' on Success; Error code otherwise. + */ +int dpmng_reset_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id); + +/** + * @brief Loads an image to AIOP tile + * + * @param[in] mc_io Pointer to opaque I/O object + * @param[in] container_id AIOP container ID + * @param[in] aiop_tile_id AIOP tile ID to reset + * @param[in] img_iova I/O virtual address of AIOP ELF image + * @param[in] img_size Size of AIOP ELF image in memory (in bytes) + * + * @returns '0' on Success; Error code otherwise. + */ +int dpmng_load_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id, + uint64_t img_iova, + uint32_t img_size); + +/** + * @brief AIOP run configuration + */ +struct dpmng_aiop_run_cfg { + uint32_t cores_mask; + /*!< Mask of AIOP cores to run (core 0 in most significant bit) */ + uint64_t options; + /*!< Execution options (currently none defined) */ +}; + +/** + * @brief Starts AIOP tile execution + * + * @param[in] mc_io Pointer to MC portal's I/O object + * @param[in] container_id AIOP container ID + * @param[in] aiop_tile_id AIOP tile ID to reset + * @param[in] cfg AIOP run configuration + * + * @returns '0' on Success; Error code otherwise. + */ +int dpmng_run_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id, + const struct dpmng_aiop_run_cfg *cfg); + +/** + * @brief Resets MC portal + * + * This function closes all object handles (tokens) that are currently + * open in the MC portal on which the command is submitted. This allows + * cleanup of stale handles that belong to non-functional user processes. + * + * @param[in] mc_io Pointer to MC portal's I/O object + * + * @returns '0' on Success; Error code otherwise. + */ +int dpmng_reset_mc_portal(struct fsl_mc_io *mc_io); + +/** @} */ + +#endif /* __FSL_DPMNG_H */ diff --git a/include/fsl_mc.h b/include/fsl-mc/fsl_mc.h index b9f089e..b9f089e 100644 --- a/include/fsl_mc.h +++ b/include/fsl-mc/fsl_mc.h diff --git a/include/fsl-mc/fsl_mc_cmd.h b/include/fsl-mc/fsl_mc_cmd.h new file mode 100644 index 0000000..e7fcb5b --- /dev/null +++ b/include/fsl-mc/fsl_mc_cmd.h @@ -0,0 +1,132 @@ +/* Copyright 2014 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __FSL_MC_CMD_H +#define __FSL_MC_CMD_H + +#define MC_CMD_NUM_OF_PARAMS 7 + +#define MAKE_UMASK64(_width) \ + ((uint64_t)((_width) < 64 ? ((uint64_t)1 << (_width)) - 1 : -1)) + +static inline uint64_t u64_enc(int lsoffset, int width, uint64_t val) +{ + return (uint64_t)(((uint64_t)val & MAKE_UMASK64(width)) << lsoffset); +} +static inline uint64_t u64_dec(uint64_t val, int lsoffset, int width) +{ + return (uint64_t)((val >> lsoffset) & MAKE_UMASK64(width)); +} + +struct mc_command { + uint64_t header; + uint64_t params[MC_CMD_NUM_OF_PARAMS]; +}; + +enum mc_cmd_status { + MC_CMD_STATUS_OK = 0x0, /*!< Completed successfully */ + MC_CMD_STATUS_READY = 0x1, /*!< Ready to be processed */ + MC_CMD_STATUS_AUTH_ERR = 0x3, /*!< Authentication error */ + MC_CMD_STATUS_NO_PRIVILEGE = 0x4, /*!< No privilege */ + MC_CMD_STATUS_DMA_ERR = 0x5, /*!< DMA or I/O error */ + MC_CMD_STATUS_CONFIG_ERR = 0x6, /*!< Configuration error */ + MC_CMD_STATUS_TIMEOUT = 0x7, /*!< Operation timed out */ + MC_CMD_STATUS_NO_RESOURCE = 0x8, /*!< No resources */ + MC_CMD_STATUS_NO_MEMORY = 0x9, /*!< No memory available */ + MC_CMD_STATUS_BUSY = 0xA, /*!< Device is busy */ + MC_CMD_STATUS_UNSUPPORTED_OP = 0xB, /*!< Unsupported operation */ + MC_CMD_STATUS_INVALID_STATE = 0xC /*!< Invalid state */ +}; + +#define MC_CMD_HDR_CMDID_O 52 /* Command ID field offset */ +#define MC_CMD_HDR_CMDID_S 12 /* Command ID field size */ +#define MC_CMD_HDR_AUTHID_O 38 /* Authentication ID field offset */ +#define MC_CMD_HDR_AUTHID_S 10 /* Authentication ID field size */ +#define MC_CMD_HDR_STATUS_O 16 /* Status field offset */ +#define MC_CMD_HDR_STATUS_S 8 /* Status field size*/ +#define MC_CMD_HDR_PRI_O 15 /* Priority field offset */ +#define MC_CMD_HDR_PRI_S 1 /* Priority field size */ + +#define MC_CMD_HDR_READ_STATUS(_hdr) \ + ((enum mc_cmd_status)u64_dec((_hdr), \ + MC_CMD_HDR_STATUS_O, MC_CMD_HDR_STATUS_S)) + +#define MC_CMD_HDR_READ_AUTHID(_hdr) \ + ((uint16_t)u64_dec((_hdr), MC_CMD_HDR_AUTHID_O, MC_CMD_HDR_AUTHID_S)) + +#define MC_CMD_PRI_LOW 0 /*!< Low Priority command indication */ +#define MC_CMD_PRI_HIGH 1 /*!< High Priority command indication */ + +#define MC_CMD_OP(_cmd, _param, _offset, _width, _type, _arg) \ + ((_cmd).params[_param] |= u64_enc((_offset), (_width), _arg)) + +#define MC_RSP_OP(_cmd, _param, _offset, _width, _type, _arg) \ + (_arg = (_type)u64_dec(_cmd.params[_param], (_offset), (_width))) + +static inline uint64_t mc_encode_cmd_header(uint16_t cmd_id, + uint8_t priority, + uint16_t auth_id) +{ + uint64_t hdr; + + hdr = u64_enc(MC_CMD_HDR_CMDID_O, MC_CMD_HDR_CMDID_S, cmd_id); + hdr |= u64_enc(MC_CMD_HDR_AUTHID_O, MC_CMD_HDR_AUTHID_S, auth_id); + hdr |= u64_enc(MC_CMD_HDR_PRI_O, MC_CMD_HDR_PRI_S, priority); + hdr |= u64_enc(MC_CMD_HDR_STATUS_O, MC_CMD_HDR_STATUS_S, + MC_CMD_STATUS_READY); + + return hdr; +} + +/** + * mc_write_command - writes a command to a Management Complex (MC) portal + * + * @portal: pointer to an MC portal + * @cmd: pointer to a filled command + */ +static inline void mc_write_command(struct mc_command __iomem *portal, + struct mc_command *cmd) +{ + int i; + + /* copy command parameters into the portal */ + for (i = 0; i < MC_CMD_NUM_OF_PARAMS; i++) + writeq(cmd->params[i], &portal->params[i]); + + /* submit the command by writing the header */ + writeq(cmd->header, &portal->header); +} + +/** + * mc_read_response - reads the response for the last MC command from a + * Management Complex (MC) portal + * + * @portal: pointer to an MC portal + * @resp: pointer to command response buffer + * + * Returns MC_CMD_STATUS_OK on Success; Error code otherwise. + */ +static inline enum mc_cmd_status mc_read_response( + struct mc_command __iomem *portal, + struct mc_command *resp) +{ + int i; + enum mc_cmd_status status; + + /* Copy command response header from MC portal: */ + resp->header = readq(&portal->header); + status = MC_CMD_HDR_READ_STATUS(resp->header); + if (status != MC_CMD_STATUS_OK) + return status; + + /* Copy command response data from MC portal: */ + for (i = 0; i < MC_CMD_NUM_OF_PARAMS; i++) + resp->params[i] = readq(&portal->params[i]); + + return status; +} + +int mc_send_command(struct fsl_mc_io *mc_io, struct mc_command *cmd); + +#endif /* __FSL_MC_CMD_H */ diff --git a/include/fsl-mc/fsl_mc_sys.h b/include/fsl-mc/fsl_mc_sys.h new file mode 100644 index 0000000..c0befe0 --- /dev/null +++ b/include/fsl-mc/fsl_mc_sys.h @@ -0,0 +1,26 @@ +/* + * Freescale Layerscape Management Complex (MC) Environment-specific code + * + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _FSL_MC_SYS_H +#define _FSL_MC_SYS_H + +#include <asm/io.h> + +struct mc_command; + +/* + * struct mc_portal_wrapper - MC command portal wrapper object + */ +struct fsl_mc_io { + struct mc_command __iomem *mmio_regs; +}; + +int mc_send_command(struct fsl_mc_io *mc_io, + struct mc_command *cmd); + +#endif /* _FSL_MC_SYS_H */ diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h index 3286c95..feccef9 100644 --- a/include/fsl_ddr.h +++ b/include/fsl_ddr.h @@ -44,11 +44,12 @@ u32 fsl_ddr_get_version(void); * to this specific DDR technology. */ static __inline__ int -compute_dimm_parameters(const generic_spd_eeprom_t *spd, +compute_dimm_parameters(const unsigned int ctrl_num, + const generic_spd_eeprom_t *spd, dimm_params_t *pdimm, unsigned int dimm_number) { - return ddr_compute_dimm_parameters(spd, pdimm, dimm_number); + return ddr_compute_dimm_parameters(ctrl_num, spd, pdimm, dimm_number); } #endif @@ -92,13 +93,15 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, unsigned int size_only); const char *step_to_string(unsigned int step); -unsigned int compute_fsl_memctl_config_regs(const memctl_options_t *popts, +unsigned int compute_fsl_memctl_config_regs(const unsigned int ctrl_num, + const memctl_options_t *popts, fsl_ddr_cfg_regs_t *ddr, const common_timing_params_t *common_dimm, const dimm_params_t *dimm_parameters, unsigned int dbw_capacity_adjust, unsigned int size_only); unsigned int compute_lowest_common_dimm_parameters( + const unsigned int ctrl_num, const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, unsigned int number_of_dimms); @@ -108,13 +111,15 @@ unsigned int populate_memctl_options(int all_dimms_registered, unsigned int ctrl_num); void check_interleaving_options(fsl_ddr_info_t *pinfo); -unsigned int mclk_to_picos(unsigned int mclk); -unsigned int get_memory_clk_period_ps(void); -unsigned int picos_to_mclk(unsigned int picos); +unsigned int mclk_to_picos(const unsigned int ctrl_num, unsigned int mclk); +unsigned int get_memory_clk_period_ps(const unsigned int ctrl_num); +unsigned int picos_to_mclk(const unsigned int ctrl_num, unsigned int picos); void fsl_ddr_set_lawbar( const common_timing_params_t *memctl_common_params, unsigned int memctl_interleaved, unsigned int ctrl_num); +void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl, + unsigned int last_ctrl); int fsl_ddr_interactive_env_var_exists(void); unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set); diff --git a/include/fsl_ddr_dimm_params.h b/include/fsl_ddr_dimm_params.h index 09a67a6..751e935 100644 --- a/include/fsl_ddr_dimm_params.h +++ b/include/fsl_ddr_dimm_params.h @@ -112,7 +112,7 @@ typedef struct dimm_params_s { #endif } dimm_params_t; -extern unsigned int ddr_compute_dimm_parameters( +unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, const generic_spd_eeprom_t *spd, dimm_params_t *pdimm, unsigned int dimm_number); diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index e3d6581..57295b4 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -108,6 +108,7 @@ #define XFERTYP_RSPTYP_48_BUSY 0x00030000 #define XFERTYP_MSBSEL 0x00000020 #define XFERTYP_DTDSEL 0x00000010 +#define XFERTYP_DDREN 0x00000008 #define XFERTYP_AC12EN 0x00000004 #define XFERTYP_BCEN 0x00000002 #define XFERTYP_DMAEN 0x00000001 diff --git a/include/fsl_sec.h b/include/fsl_sec.h index aa850a3..b6e6f04 100644 --- a/include/fsl_sec.h +++ b/include/fsl_sec.h @@ -175,6 +175,32 @@ struct jr_regs { u32 jrcr; }; +/* + * Scatter Gather Entry - Specifies the the Scatter Gather Format + * related information + */ +struct sg_entry { +#ifdef CONFIG_SYS_FSL_SEC_LE + uint32_t addr_lo; /* Memory Address - lo */ + uint16_t addr_hi; /* Memory Address of start of buffer - hi */ + uint16_t reserved_zero; +#else + uint16_t reserved_zero; + uint16_t addr_hi; /* Memory Address of start of buffer - hi */ + uint32_t addr_lo; /* Memory Address - lo */ +#endif + + uint32_t len_flag; /* Length of the data in the frame */ +#define SG_ENTRY_LENGTH_MASK 0x3FFFFFFF +#define SG_ENTRY_EXTENSION_BIT 0x80000000 +#define SG_ENTRY_FINAL_BIT 0x40000000 + uint32_t bpid_offset; +#define SG_ENTRY_BPID_MASK 0x00FF0000 +#define SG_ENTRY_BPID_SHIFT 16 +#define SG_ENTRY_OFFSET_MASK 0x00001FFF +#define SG_ENTRY_OFFSET_SHIFT 0 +}; + int sec_init(void); #endif diff --git a/include/hw_sha.h b/include/hw_sha.h index 783350d..ab19a99 100644 --- a/include/hw_sha.h +++ b/include/hw_sha.h @@ -7,7 +7,7 @@ */ #ifndef __HW_SHA_H #define __HW_SHA_H - +#include <hash.h> /** * Computes hash value of input pbuf using h/w acceleration @@ -34,4 +34,43 @@ void hw_sha256(const uchar * in_addr, uint buflen, */ void hw_sha1(const uchar * in_addr, uint buflen, uchar * out_addr, uint chunk_size); + +/* + * Create the context for sha progressive hashing using h/w acceleration + * + * @algo: Pointer to the hash_algo struct + * @ctxp: Pointer to the pointer of the context for hashing + * @return 0 if ok, -ve on error + */ +int hw_sha_init(struct hash_algo *algo, void **ctxp); + +/* + * Update buffer for sha progressive hashing using h/w acceleration + * + * The context is freed by this function if an error occurs. + * + * @algo: Pointer to the hash_algo struct + * @ctx: Pointer to the context for hashing + * @buf: Pointer to the buffer being hashed + * @size: Size of the buffer being hashed + * @is_last: 1 if this is the last update; 0 otherwise + * @return 0 if ok, -ve on error + */ +int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf, + unsigned int size, int is_last); + +/* + * Copy sha hash result at destination location + * + * The context is freed after completion of hash operation or after an error. + * + * @algo: Pointer to the hash_algo struct + * @ctx: Pointer to the context for hashing + * @dest_buf: Pointer to the destination buffer where hash is to be copied + * @size: Size of the buffer being hashed + * @return 0 if ok, -ve on error + */ +int hw_sha_finish(struct hash_algo *algo, void *ctx, void *dest_buf, + int size); + #endif diff --git a/include/i2c.h b/include/i2c.h index 27fe00f..31b0389 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -25,14 +25,13 @@ * enough as to be incompatible for compilation purposes. */ -#ifdef CONFIG_DM_I2C - enum dm_i2c_chip_flags { DM_I2C_CHIP_10BIT = 1 << 0, /* Use 10-bit addressing */ DM_I2C_CHIP_RD_ADDRESS = 1 << 1, /* Send address for each read byte */ DM_I2C_CHIP_WR_ADDRESS = 1 << 2, /* Send address for each write byte */ }; +struct udevice; /** * struct dm_i2c_chip - information about an i2c chip * @@ -125,21 +124,21 @@ int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, struct udevice **devp); /** - * i2c_set_bus_speed() - set the speed of a bus + * dm_i2c_set_bus_speed() - set the speed of a bus * * @bus: Bus to adjust * @speed: Requested speed in Hz * @return 0 if OK, -EINVAL for invalid values */ -int i2c_set_bus_speed(struct udevice *bus, unsigned int speed); +int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed); /** - * i2c_get_bus_speed() - get the speed of a bus + * dm_i2c_get_bus_speed() - get the speed of a bus * * @bus: Bus to check * @return speed of selected I2C bus in Hz, -ve on error */ -int i2c_get_bus_speed(struct udevice *bus); +int dm_i2c_get_bus_speed(struct udevice *bus); /** * i2c_set_chip_flags() - set flags for a chip @@ -439,8 +438,6 @@ int i2c_get_chip_for_busnum(int busnum, int chip_addr, uint offset_len, int i2c_chip_ofdata_to_platdata(const void *blob, int node, struct dm_i2c_chip *chip); -#endif - #ifndef CONFIG_DM_I2C /* diff --git a/include/mmc.h b/include/mmc.h index e4b071e..2ad0f19 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -14,24 +14,41 @@ #include <linux/compiler.h> #include <part.h> -#define SD_VERSION_SD 0x20000 -#define SD_VERSION_3 (SD_VERSION_SD | 0x300) -#define SD_VERSION_2 (SD_VERSION_SD | 0x200) -#define SD_VERSION_1_0 (SD_VERSION_SD | 0x100) -#define SD_VERSION_1_10 (SD_VERSION_SD | 0x10a) -#define MMC_VERSION_MMC 0x10000 -#define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC) -#define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x102) -#define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x104) -#define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x202) -#define MMC_VERSION_3 (MMC_VERSION_MMC | 0x300) -#define MMC_VERSION_4 (MMC_VERSION_MMC | 0x400) -#define MMC_VERSION_4_1 (MMC_VERSION_MMC | 0x401) -#define MMC_VERSION_4_2 (MMC_VERSION_MMC | 0x402) -#define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x403) -#define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429) -#define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405) -#define MMC_VERSION_5_0 (MMC_VERSION_MMC | 0x500) +/* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */ +#define SD_VERSION_SD (1U << 31) +#define MMC_VERSION_MMC (1U << 30) + +#define MAKE_SDMMC_VERSION(a, b, c) \ + ((((u32)(a)) << 16) | ((u32)(b) << 8) | (u32)(c)) +#define MAKE_SD_VERSION(a, b, c) \ + (SD_VERSION_SD | MAKE_SDMMC_VERSION(a, b, c)) +#define MAKE_MMC_VERSION(a, b, c) \ + (MMC_VERSION_MMC | MAKE_SDMMC_VERSION(a, b, c)) + +#define EXTRACT_SDMMC_MAJOR_VERSION(x) \ + (((u32)(x) >> 16) & 0xff) +#define EXTRACT_SDMMC_MINOR_VERSION(x) \ + (((u32)(x) >> 8) & 0xff) +#define EXTRACT_SDMMC_CHANGE_VERSION(x) \ + ((u32)(x) & 0xff) + +#define SD_VERSION_3 MAKE_SD_VERSION(3, 0, 0) +#define SD_VERSION_2 MAKE_SD_VERSION(2, 0, 0) +#define SD_VERSION_1_0 MAKE_SD_VERSION(1, 0, 0) +#define SD_VERSION_1_10 MAKE_SD_VERSION(1, 10, 0) + +#define MMC_VERSION_UNKNOWN MAKE_MMC_VERSION(0, 0, 0) +#define MMC_VERSION_1_2 MAKE_MMC_VERSION(1, 2, 0) +#define MMC_VERSION_1_4 MAKE_MMC_VERSION(1, 4, 0) +#define MMC_VERSION_2_2 MAKE_MMC_VERSION(2, 2, 0) +#define MMC_VERSION_3 MAKE_MMC_VERSION(3, 0, 0) +#define MMC_VERSION_4 MAKE_MMC_VERSION(4, 0, 0) +#define MMC_VERSION_4_1 MAKE_MMC_VERSION(4, 1, 0) +#define MMC_VERSION_4_2 MAKE_MMC_VERSION(4, 2, 0) +#define MMC_VERSION_4_3 MAKE_MMC_VERSION(4, 3, 0) +#define MMC_VERSION_4_41 MAKE_MMC_VERSION(4, 4, 1) +#define MMC_VERSION_4_5 MAKE_MMC_VERSION(4, 5, 0) +#define MMC_VERSION_5_0 MAKE_MMC_VERSION(5, 0, 0) #define MMC_MODE_HS (1 << 0) #define MMC_MODE_HS_52MHz (1 << 1) @@ -43,7 +60,8 @@ #define SD_DATA_4BIT 0x00040000 -#define IS_SD(x) (x->version & SD_VERSION_SD) +#define IS_SD(x) ((x)->version & SD_VERSION_SD) +#define IS_MMC(x) ((x)->version & SD_VERSION_MMC) #define MMC_DATA_READ 1 #define MMC_DATA_WRITE 2 diff --git a/include/net.h b/include/net.h index 73ea88b..43e3d28 100644 --- a/include/net.h +++ b/include/net.h @@ -512,10 +512,6 @@ unsigned add_ip_checksums(unsigned offset, unsigned sum, unsigned new_sum); */ int ip_checksum_ok(const void *addr, unsigned nbytes); -/* Checksum */ -extern int NetCksumOk(uchar *, int); /* Return true if cksum OK */ -extern uint NetCksum(uchar *, int); /* Calculate the checksum */ - /* Callbacks */ extern rxhand_f *net_get_udp_handler(void); /* Get UDP RX packet handler */ extern void net_set_udp_handler(rxhand_f *); /* Set UDP RX packet handler */ diff --git a/include/netdev.h b/include/netdev.h index daffc12..90140bd 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -55,7 +55,6 @@ int ftmac100_initialize(bd_t *bits); int ftmac110_initialize(bd_t *bits); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); -int ks8695_eth_initialize(void); int ks8851_mll_initialize(u8 dev_num, int base_addr); int lan91c96_initialize(u8 dev_num, int base_addr); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); diff --git a/include/serial.h b/include/serial.h index 66ed12c..de40e94 100644 --- a/include/serial.h +++ b/include/serial.h @@ -29,7 +29,7 @@ extern struct serial_device *default_serial_console(void); #if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_440) || \ - defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \ + defined(CONFIG_MPC5xxx) || \ defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \ defined(CONFIG_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \ @@ -182,7 +182,6 @@ void evb64260_serial_initialize(void); void imx_serial_initialize(void); void iop480_serial_initialize(void); void jz_serial_initialize(void); -void ks8695_serial_initialize(void); void leon2_serial_initialize(void); void leon3_serial_initialize(void); void lh7a40x_serial_initialize(void); |