diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/MERGERBOX.h | 14 | ||||
| -rw-r--r-- | include/configs/MPC8308RDB.h | 39 | ||||
| -rw-r--r-- | include/configs/MPC8313ERDB.h | 70 | ||||
| -rw-r--r-- | include/configs/MPC8315ERDB.h | 35 | ||||
| -rw-r--r-- | include/configs/MPC8323ERDB.h | 84 | ||||
| -rw-r--r-- | include/configs/MPC832XEMDS.h | 143 | ||||
| -rw-r--r-- | include/configs/MPC8349EMDS.h | 55 | ||||
| -rw-r--r-- | include/configs/MPC8349ITX.h | 33 | ||||
| -rw-r--r-- | include/configs/MPC8360EMDS.h | 93 | ||||
| -rw-r--r-- | include/configs/MPC8360ERDK.h | 40 | ||||
| -rw-r--r-- | include/configs/MPC837XEMDS.h | 44 | ||||
| -rw-r--r-- | include/configs/MPC837XERDB.h | 42 | ||||
| -rw-r--r-- | include/configs/MVBLM7.h | 15 | ||||
| -rw-r--r-- | include/configs/SIMPC8313.h | 14 | ||||
| -rw-r--r-- | include/configs/TQM834x.h | 5 | ||||
| -rw-r--r-- | include/configs/km/km83xx-common.h | 14 | ||||
| -rw-r--r-- | include/configs/kmeter1.h | 7 | ||||
| -rw-r--r-- | include/configs/kmsupx5.h | 4 | ||||
| -rw-r--r-- | include/configs/mpc8308_p1m.h | 32 | ||||
| -rw-r--r-- | include/configs/sbc8349.h | 55 | ||||
| -rw-r--r-- | include/configs/suvd3.h | 2 | ||||
| -rw-r--r-- | include/configs/tuda1.h | 13 | ||||
| -rw-r--r-- | include/configs/tuxa1.h | 13 | ||||
| -rw-r--r-- | include/configs/ve8313.h | 25 | ||||
| -rw-r--r-- | include/configs/vme8349.h | 55 |
25 files changed, 541 insertions, 405 deletions
diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h index aa35c1c..8176916 100644 --- a/include/configs/MERGERBOX.h +++ b/include/configs/MERGERBOX.h @@ -159,11 +159,13 @@ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V) +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 |\ + BR_MS_GPCM | BR_V) #define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_FLASH_BASE | OR_UPM_XAM |\ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 |\ - OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX |\ - OR_GPCM_EHTR | OR_GPCM_EAD) + OR_GPCM_XACS | OR_GPCM_SCY_15 |\ + OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET |\ + OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 512 @@ -180,14 +182,14 @@ #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BASE 0xE0600000 -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE | (2<<BR_DECC_SHIFT) |\ +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE | BR_DECC_CHK_GEN |\ BR_PS_8 | BR_MS_FCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 | OR_FCM_BCTLD | OR_FCM_CST |\ +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_BCTLD | OR_FCM_CST |\ OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_RST |\ OR_FCM_TRLX | OR_FCM_EHTR) #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) /* * Serial Port diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 334c96e..47ff2f5 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -239,19 +239,18 @@ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) -#define CONFIG_SYS_BR0_PRELIM (\ - CONFIG_SYS_FLASH_BASE /* Flash Base address */ |\ - (2 << BR_PS_SHIFT) /* 16 bit port size */ |\ - BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ | OR_UPM_XAM \ | OR_GPCM_CSNT \ | OR_GPCM_ACS_DIV2 \ | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ - | OR_GPCM_EAD) + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ /* 127 64KB sectors and 8 8KB top sectors per device */ @@ -264,12 +263,13 @@ * NAND Flash on the Local Bus */ #define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ +#define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) /* 0x00008000 */ #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit port */ \ + | BR_DECC_CHK_GEN /* Use HW ECC */ \ + | BR_PS_8 /* 8 bit Port */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 /* length 32K */ \ +#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \ | OR_FCM_CSCT \ | OR_FCM_CST \ | OR_FCM_CHT \ @@ -283,9 +283,22 @@ #ifdef CONFIG_VSC7385_ENET #define CONFIG_TSEC2 + /* VSC7385 Base address on CS2 */ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 -#define CONFIG_SYS_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */ -#define CONFIG_SYS_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/ +#define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ + | BR_PS_8 /* 8-bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ + /* 0xF0000801 */ +#define CONFIG_SYS_OR2_PRELIM (P2SZ_TO_AM(CONFIG_SYS_VSC7385_SIZE) \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_SETA \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET) + /* 0xFFFE09FF */ /* Access window base at VSC7385 base */ #define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE /* Access window size 128K */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 93e1b1b..21771fd 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -205,9 +205,10 @@ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ #define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \ - | (2 << BR_PS_SHIFT) /* 16 bit port */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_NOR_OR_PRELIM (0xFF800000 /* 8 MByte */ \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ | OR_GPCM_XACS \ | OR_GPCM_SCY_9 \ | OR_GPCM_EHTR \ @@ -215,7 +216,8 @@ /* 0xFF006FF7 TODO SLOW 16 MB flash size */ /* window base at flash base */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000017 /* 16 MB window size */ + /* 16 MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */ @@ -271,14 +273,16 @@ #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 +#define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) #define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_DECC_CHK_GEN /* Use HW ECC */ \ | BR_PS_8 /* 8 bit port */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFF8000 /* length 32K */ \ +#define CONFIG_SYS_NAND_OR_PRELIM \ + (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \ | OR_FCM_CSCT \ | OR_FCM_CST \ | OR_FCM_CHT \ @@ -300,31 +304,57 @@ #endif #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM -/* local bus read write buffer mapping */ -#define CONFIG_SYS_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */ -#define CONFIG_SYS_OR3_PRELIM 0xFFFF8FF7 /* 32kB */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM 0xFA000000 -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ +/* local bus write LED / read status buffer (BCSR) mapping */ +#define CONFIG_SYS_BCSR_ADDR 0xFA000000 +#define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */ + /* map at 0xFA000000 on LCS3 */ +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_BCSR_ADDR \ + | BR_PS_8 /* 8 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ + /* 0xFA000801 */ +#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(CONFIG_SYS_BCSR_SIZE) \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xFFFF8FF7 */ +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_BCSR_ADDR +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) /* Vitesse 7385 */ -#define CONFIG_SYS_VSC7385_BASE 0xF0000000 - #ifdef CONFIG_VSC7385_ENET - /* VSC7385 Base address */ -#define CONFIG_SYS_BR2_PRELIM 0xf0000801 - /* VSC7385, 128K bytes*/ -#define CONFIG_SYS_OR2_PRELIM 0xfffe09ff + /* VSC7385 Base address on LCS2 */ +#define CONFIG_SYS_VSC7385_BASE 0xF0000000 +#define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ + +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ + | BR_PS_8 /* 8 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR2_PRELIM (P2SZ_TO_AM(CONFIG_SYS_VSC7385_SIZE) \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_SETA \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xFFFE09FF */ + /* Access window base at VSC7385 base */ #define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE - /* Access window size 128K */ -#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010 +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) #endif diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 0ae1d99..2ebe6ad 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -229,20 +229,21 @@ /* Window base at flash base */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) #define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \ - | (2 << BR_PS_SHIFT) /* 16 bit port */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_NOR_OR_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ - | OR_GPCM_EAD) + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_UPM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ /* 127 64KB sectors and 8 8KB top sectors per device */ @@ -273,7 +274,8 @@ #define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE 16384 +#define CONFIG_SYS_NAND_BLOCK_SIZE 16384 +#define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) /* 0x00008000 */ #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000 @@ -282,11 +284,12 @@ #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 #define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_DECC_CHK_GEN /* Use HW ECC */ \ | BR_PS_8 /* 8 bit port */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFF8000 /* length 32K */ \ +#define CONFIG_SYS_NAND_OR_PRELIM \ + (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \ | OR_FCM_CSCT \ | OR_FCM_CST \ | OR_FCM_CHT \ @@ -308,7 +311,7 @@ #endif #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 28c61ca..40e9546 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -185,12 +185,22 @@ /* Window base at flash base */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | (2 << BR_PS_SHIFT) /* 16 bit port */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xFE006FF7 */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ @@ -198,72 +208,6 @@ #undef CONFIG_SYS_FLASH_CHECKSUM /* - * SDRAM on the Local Bus - */ -#undef CONFIG_SYS_LB_SDRAM /* The board has not SRDAM on local bus */ - -#ifdef CONFIG_SYS_LB_SDRAM -#define CONFIG_SYS_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base addr */ -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_LBC_SDRAM_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ - -/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ -/* - * Base Register 2 and Option Register 2 configure SDRAM. - * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. - * - * For BR2, need: - * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 - * port size = 32-bits = BR2[19:20] = 11 - * no parity checking = BR2[21:22] = 00 - * SDRAM for MSEL = BR2[24:26] = 011 - * Valid = BR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 - * - * CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into - * the top 17 bits of BR2. - */ - - /*Port size=32bit, MSEL=SDRAM */ -#define CONFIG_SYS_BR2_PRELIM 0xf0001861 - -/* - * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. - * - * For OR2, need: - * 64MB mask for AM, OR2[0:7] = 1111 1100 - * XAM, OR2[17:18] = 11 - * 9 columns OR2[19-21] = 010 - * 13 rows OR2[23-25] = 100 - * EAD set for extra time OR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 - */ - -#define CONFIG_SYS_OR2_PRELIM 0xfc006901 - - /* LB sdram refresh timer, about 6us */ -#define CONFIG_SYS_LBC_LSRT 0x32000000 - /* LB refresh timer prescal, 266MHz/32 */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 - -#define CONFIG_SYS_LBC_LSDMR_COMMON 0x0063b723 - -#endif - -/* - * Windows to access PIB via local bus - */ - /* windows base 0xf8008000 */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM 0xf8008000 -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ - -/* * Serial Port */ #define CONFIG_CONS_INDEX 1 diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index d552046..4ed5a97 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -210,12 +210,22 @@ /* Window base at flash base */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | (2 << BR_PS_SHIFT) /* 16 bit port */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xfe006ff7 */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ @@ -228,94 +238,67 @@ #define CONFIG_SYS_BCSR 0xF8000000 /* Access window base at BCSR base */ #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR - /* Access window size 32K */ -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E - - /* Port size=8bit, MSEL=GPCM */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR|0x00000801) -#define CONFIG_SYS_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ - -/* - * SDRAM on the Local Bus - */ -#undef CONFIG_SYS_LB_SDRAM /* The board has not SRDAM on local bus */ - -#ifdef CONFIG_SYS_LB_SDRAM -#define CONFIG_SYS_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_LBC_SDRAM_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ - -/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ -/* - * Base Register 2 and Option Register 2 configure SDRAM. - * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. - * - * For BR2, need: - * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 - * port size = 32-bits = BR2[19:20] = 11 - * no parity checking = BR2[21:22] = 00 - * SDRAM for MSEL = BR2[24:26] = 011 - * Valid = BR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 - * - * CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into - * the top 17 bits of BR2. - */ - -#define CONFIG_SYS_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */ - -/* - * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. - * - * For OR2, need: - * 64MB mask for AM, OR2[0:7] = 1111 1100 - * XAM, OR2[17:18] = 11 - * 9 columns OR2[19-21] = 010 - * 13 rows OR2[23-25] = 100 - * EAD set for extra time OR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 - */ - -#define CONFIG_SYS_OR2_PRELIM 0xfc006901 - - /* LB sdram refresh timer, about 6us */ -#define CONFIG_SYS_LBC_LSRT 0x32000000 - /* LB refresh timer prescal, 266MHz/32 */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 - -#define CONFIG_SYS_LBC_LSDMR_COMMON 0x0063b723 - -#endif +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) + +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ + | BR_PS_8 \ + | BR_MS_GPCM \ + | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xFFFFE9F7 */ /* * Windows to access PIB via local bus */ - /* windows base 0xf8008000 */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM 0xf8008000 - /* windows size 64KB */ -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000f + /* PIB window base 0xF8008000 */ +#define CONFIG_SYS_PIB_BASE 0xF8008000 +#define CONFIG_SYS_PIB_WINDOW_SIZE (32 * 1024) +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PIB_BASE +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) /* * CS2 on Local Bus, to PIB */ - /* CS2 base address at 0xf8008000 */ -#define CONFIG_SYS_BR2_PRELIM 0xf8008801 - /* size 32KB, port size 8bit, GPCM */ -#define CONFIG_SYS_OR2_PRELIM 0xffffe9f7 +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_PIB_BASE \ + | BR_PS_8 \ + | BR_MS_GPCM \ + | BR_V) + /* 0xF8008801 */ +#define CONFIG_SYS_OR2_PRELIM (P2SZ_TO_AM(CONFIG_SYS_PIB_WINDOW_SIZE) \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xffffe9f7 */ /* * CS3 on Local Bus, to PIB */ - /* CS3 base address at 0xf8010000 */ -#define CONFIG_SYS_BR3_PRELIM 0xf8010801 - /* size 32KB, port size 8bit, GPCM */ -#define CONFIG_SYS_OR3_PRELIM 0xffffe9f7 +#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_PIB_BASE + \ + CONFIG_SYS_PIB_WINDOW_SIZE) \ + | BR_PS_8 \ + | BR_MS_GPCM \ + | BR_V) + /* 0xF8010801 */ +#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(CONFIG_SYS_PIB_WINDOW_SIZE) \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xffffe9f7 */ /* * Serial Port diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 0c0e904..a6aebb7 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -178,21 +178,23 @@ #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - (2 << BR_PS_SHIFT) | /* 16 bit port */ \ - BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ | OR_UPM_XAM \ | OR_GPCM_CSNT \ | OR_GPCM_ACS_DIV2 \ | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) + /* window base at flash base */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32 MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -215,11 +217,19 @@ #define CONFIG_SYS_BCSR 0xE2400000 /* Access window base at BCSR base */ #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR - /* Access window size 32K */ -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E - /* Port-size=8bit, MSEL=GPCM */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR|0x00000801) -#define CONFIG_SYS_OR1_PRELIM 0xFFFFE8F0 /* length 32K */ +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ + | BR_PS_8 \ + | BR_MS_GPCM \ + | BR_V) + /* 0x00000801 */ +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_CLEAR \ + | OR_GPCM_EHTR_CLEAR) + /* 0xFFFFE8F0 */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ @@ -263,15 +273,15 @@ * * 0 4 8 12 16 20 24 28 * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 - * - * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into - * FIXME: the top 17 bits of BR2. */ - /* Port-size=32bit, MSEL=SDRAM */ -#define CONFIG_SYS_BR2_PRELIM 0xF0001861 -#define CONFIG_SYS_LBLAWBAR2_PRELIM 0xF0000000 -#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000019 /* 64M */ +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LBC_SDRAM_BASE \ + | BR_PS_32 /* 32-bit port */ \ + | BR_MS_SDRAM /* MSEL = SDRAM */ \ + | BR_V) /* Valid */ + /* 0xF0001861 */ +#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_LBC_SDRAM_BASE +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. @@ -287,7 +297,12 @@ * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901 */ -#define CONFIG_SYS_OR2_PRELIM 0xFC006901 +#define CONFIG_SYS_OR2_PRELIM (OR_AM_64MB \ + | OR_SDRAM_XAM \ + | ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \ + | ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \ + | OR_SDRAM_EAD) + /* 0xFC006901 */ /* LB sdram refresh timer, about 6us */ #define CONFIG_SYS_LBC_LSRT 0x32000000 diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 3fb558f..a2ceba7 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -235,7 +235,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_FLASH_BANKS_LIST \ {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000} #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */ -#define CONFIG_SYS_FLASH_SIZE_SHIFT 4 /* log2 of the above value */ #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ /* Vitesse 7385 */ @@ -256,19 +255,21 @@ boards, we say we have two, but don't display a message if we find only one. */ /* Flash */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ + | BR_PS_16 \ + | BR_MS_GPCM \ + | BR_V) +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ | OR_UPM_XAM \ | OR_GPCM_CSNT \ | OR_GPCM_ACS_DIV2 \ | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN \ - | (0x13 + CONFIG_SYS_FLASH_SIZE_SHIFT)) +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) /* Vitesse 7385 */ @@ -276,14 +277,17 @@ boards, we say we have two, but don't display a message if we find only one. */ #ifdef CONFIG_VSC7385_ENET -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE | BR_PS_8 | BR_V) +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE \ + | BR_PS_8 \ + | BR_MS_GPCM \ + | BR_V) #define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB \ | OR_GPCM_CSNT \ | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ | OR_GPCM_SETA \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_VSC7385_BASE @@ -294,14 +298,17 @@ boards, we say we have two, but don't display a message if we find only one. */ /* LED */ #define CONFIG_SYS_LED_BASE 0xF9000000 -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE | BR_PS_8 | BR_V) +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE \ + | BR_PS_8 \ + | BR_MS_GPCM \ + | BR_V) #define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB \ | OR_GPCM_CSNT \ | OR_GPCM_ACS_DIV2 \ | OR_GPCM_XACS \ | OR_GPCM_SCY_9 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) /* Compact Flash */ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 3a5af2d..aaff93f 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -207,19 +207,20 @@ /* Window base at flash base */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | (2 << BR_PS_SHIFT) /* 16 bit port */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ - | OR_UPM_XAM \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_GPCM_XAM \ | OR_GPCM_CSNT \ | OR_GPCM_ACS_DIV2 \ | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ @@ -233,11 +234,21 @@ #define CONFIG_SYS_BCSR 0xF8000000 /* Access window base at BCSR base */ #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000F /* Access window size 64K */ - - /* Port size=8bit, MSEL=GPCM */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR|0x00000801) -#define CONFIG_SYS_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) + +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ + | BR_PS_8 \ + | BR_MS_GPCM \ + | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xFFFFE9F7 */ /* * SDRAM on the Local Bus @@ -249,7 +260,7 @@ #ifdef CONFIG_SYS_LB_SDRAM #define CONFIG_SYS_LBLAWBAR2 0 -#define CONFIG_SYS_LBLAWAR2 0x80000019 /* 64MB */ +#define CONFIG_SYS_LBLAWAR2 (LBLAWAR_EN | LBLAWAR_64MB) /*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ /* @@ -266,7 +277,8 @@ * xxxx xxxx xxxx xxxx x001 1000 0110 0001 = 00001861 */ -#define CONFIG_SYS_BR2 0x00001861 /*Port size=32bit, MSEL=SDRAM */ +/* Port size=32bit, MSEL=DRAM */ +#define CONFIG_SYS_BR2 (BR_PS_32 | BR_MS_SDRAM | BR_V) /* 0xF0001861 */ /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. @@ -282,7 +294,12 @@ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 */ -#define CONFIG_SYS_OR2 0xfc006901 +#define CONFIG_SYS_OR2 (MEG_TO_AM(CONFIG_SYS_LBC_SDRAM_SIZE) \ + | OR_SDRAM_XAM \ + | ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \ + | ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \ + | OR_SDRAM_EAD) + /* 0xFC006901 */ /* LB sdram refresh timer, about 6us */ #define CONFIG_SYS_LBC_LSRT 0x32000000 @@ -303,22 +320,54 @@ #endif /* - * Windows to access PIB via local bus + * Windows to access Platform I/O Boards (PIB) via local bus */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM 0xf8010000 /* windows base 0xf8010000 */ -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000e /* windows size 32KB */ +#define CONFIG_SYS_PIB_BASE 0xF8008000 +#define CONFIG_SYS_PIB_WINDOW_SIZE (32 * 1024) + +/* [RFC] This LBLAW only covers the 2nd window (CS5) */ +#define CONFIG_SYS_LBLAWBAR3_PRELIM \ + CONFIG_SYS_PIB_BASE + CONFIG_SYS_PIB_WINDOW_SIZE +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) /* * CS4 on Local Bus, to PIB */ -#define CONFIG_SYS_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */ -#define CONFIG_SYS_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ + /* CS4 base address at 0xf8008000 */ +#define CONFIG_SYS_BR4_PRELIM (CONFIG_SYS_PIB_BASE \ + | BR_PS_8 \ + | BR_MS_GPCM \ + | BR_V) + /* 0xF8008801 */ +#define CONFIG_SYS_OR4_PRELIM (OR_AM_32KB \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xffffe9f7 */ /* * CS5 on Local Bus, to PIB */ -#define CONFIG_SYS_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */ -#define CONFIG_SYS_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ + /* CS5 base address at 0xf8010000 */ +#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_PIB_BASE + \ + CONFIG_SYS_PIB_WINDOW_SIZE) \ + | BR_PS_8 \ + | BR_MS_GPCM \ + | BR_V) + /* 0xF8010801 */ +#define CONFIG_SYS_OR5_PRELIM (CONFIG_SYS_PIB_BASE \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xffffe9f7 */ /* * Serial Port diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index bc574a6..ea634a6 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -198,19 +198,20 @@ /* Window base at flash base */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | (2 << BR_PS_SHIFT) /* 16 bit port */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ | OR_UPM_XAM \ | OR_GPCM_CSNT \ | OR_GPCM_ACS_DIV2 \ | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ @@ -228,11 +229,20 @@ #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001b /* Access window size 4K */ +/* + * [RFC] Comment said 4KB window; code said 256MB window; OR1 says 64MB + * ... What's correct? + */ +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) /* Port size 8 bit, UPMA */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE | 0x00000881) -#define CONFIG_SYS_OR1_PRELIM 0xfc000001 +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ + | BR_PS_8 \ + | BR_MS_UPMA \ + | BR_V) + /* 0x60000881 */ +#define CONFIG_SYS_OR1_PRELIM (OR_AM_64MB | OR_UPM_EAD) + /* 0xFC000001 */ /* * Fujitsu MB86277 (MINT) graphics controller @@ -240,12 +250,16 @@ #define CONFIG_SYS_VIDEO_BASE 0x70000000 #define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VIDEO_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000019 /* Access window size 64MB */ +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) /* Port size 32 bit, UPMB */ - /* PS=11, UPMB */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VIDEO_BASE | 0x000018a1) -#define CONFIG_SYS_OR2_PRELIM 0xfc000001 /* (64MB, EAD=1) */ +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VIDEO_BASE \ + | BR_PS_32 \ + | BR_MS_UPMB \ + | BR_V) + /* 0x000018a1 */ +#define CONFIG_SYS_OR2_PRELIM (OR_AM_64MB | OR_UPM_EAD) + /* 0xFC000001 */ /* * Serial Port diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 8c2af08..d7ee405 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -243,19 +243,20 @@ /* Window base at flash base */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | (2 << BR_PS_SHIFT) /* 16 bit port */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ | OR_UPM_XAM \ | OR_GPCM_CSNT \ | OR_GPCM_ACS_DIV2 \ | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) /* 0xFE000FF7 */ @@ -272,11 +273,22 @@ #define CONFIG_SYS_BCSR 0xF8000000 /* Access window base at BCSR base */ #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ - - /* Port size=8bit, MSEL=GPCM */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR | 0x00000801) -#define CONFIG_SYS_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) + +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ + | BR_PS_8 \ + | BR_MS_GPCM \ + | BR_V) + /* 0xF8000801 */ +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xFFFFE9F7 */ /* * NAND Flash on the Local Bus @@ -286,13 +298,13 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ +#define CONFIG_SYS_NAND_BASE 0xE0600000 #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_DECC_CHK_GEN /* Use HW ECC */ \ | BR_PS_8 /* 8 bit port */ \ | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR3_PRELIM (0xFFFF8000 /* length 32K */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB \ | OR_FCM_BCTLD \ | OR_FCM_CST \ | OR_FCM_CHT \ @@ -303,7 +315,7 @@ /* 0xFFFF919E */ #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) /* * Serial Port diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index bf8a94d..f249cbb 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -275,14 +275,15 @@ #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */ #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | (2 << BR_PS_SHIFT) /* 16 bit port */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (0xFF800000 /* 8 MByte */ \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ | OR_GPCM_XACS \ | OR_GPCM_SCY_9 \ - | OR_GPCM_EHTR \ + | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) - /* 0xFF806FF7 TODO SLOW 8 MB flash size */ + /* 0xFF800191 */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -294,13 +295,13 @@ /* * NAND Flash on the Local Bus */ -#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ +#define CONFIG_SYS_NAND_BASE 0xE0600000 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ - | (2 << BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 | /* 8 bit Port */ \ - | BR_MS_FCM | /* MSEL = FCM */ \ + | BR_DECC_CHK_GEN /* Use HW ECC */ \ + | BR_PS_8 /* 8 bit port */ \ + | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 /* length 32K */ \ +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ | OR_FCM_CSCT \ | OR_FCM_CST \ | OR_FCM_CHT \ @@ -308,7 +309,7 @@ | OR_FCM_TRLX \ | OR_FCM_EHTR) #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) /* Vitesse 7385 */ @@ -316,11 +317,24 @@ #ifdef CONFIG_VSC7385_ENET -#define CONFIG_SYS_BR2_PRELIM 0xf0000801 /* Base address */ -#define CONFIG_SYS_OR2_PRELIM 0xfffe09ff /* 128K bytes*/ +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ + | BR_PS_8 \ + | BR_MS_GPCM \ + | BR_V) + /* 0xF0000801 */ +#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_SETA \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xfffe09ff */ + /* Access Base */ #define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010 /* Access Size 128K */ +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) #endif diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index f0d4e80..8b20f72 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -103,26 +103,27 @@ #define CONFIG_SYS_FLASH_BASE 0xFF800000 #define CONFIG_SYS_FLASH_SIZE 8 -#define CONFIG_SYS_FLASH_SIZE_SHIFT 3 #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ + | BR_PS_16 \ + | BR_MS_GPCM \ + | BR_V) +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ | OR_UPM_XAM \ | OR_GPCM_CSNT \ | OR_GPCM_ACS_DIV2 \ | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN \ - | (0x13 + CONFIG_SYS_FLASH_SIZE_SHIFT)) +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) /* * U-Boot memory configuration diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index e7d477d..77be360 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -151,26 +151,26 @@ #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_DECC_CHK_GEN /* Use HW ECC */ \ | BR_PS_8 /* 8 bit Port */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ #ifdef CONFIG_NAND_SP -#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFF8000 /* length 32K */ \ +#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ | OR_FCM_CSCT \ | OR_FCM_CST \ | OR_FCM_CHT \ | OR_FCM_SCY_1 \ | OR_FCM_TRLX \ | OR_FCM_EHTR) -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000000E /* 32KB */ -#define CONFIG_SYS_NAND_PAGE_SIZE (512) /* NAND chip page size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) +#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */ /* NAND chip block size */ #define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) #define NAND_CACHE_PAGES 32 #elif defined(CONFIG_NAND_LP) -#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ +#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB \ | OR_FCM_PGS \ | OR_FCM_CSCT \ | OR_FCM_CST \ @@ -178,8 +178,8 @@ | OR_FCM_SCY_1 \ | OR_FCM_TRLX \ | OR_FCM_EHTR) -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000011 /* 256KB */ -#define CONFIG_SYS_NAND_PAGE_SIZE (2048) /* NAND chip page size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256KB) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 /* NAND chip page size */ /* NAND chip block size */ #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) #define NAND_CACHE_PAGES 64 diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index ae296eb..0b53702 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -119,13 +119,12 @@ | OR_GPCM_SCY_5 \ | OR_GPCM_TRLX) -#define CONFIG_SYS_PRELIM_OR_AM 0xc0000000 /* OR addr mask: 1 GiB */ +#define CONFIG_SYS_PRELIM_OR_AM OR_AM_1GB /* OR addr mask: 1 GiB */ #define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM \ | CONFIG_SYS_OR_TIMING_FLASH) - /* 1 GiB window size (2^(size + 1)) */ -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001D +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_1GB) /* Window base at flash base */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index 0d411c2..06ecb8a 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -103,16 +103,17 @@ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001b /* 256MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_PS_16 | /* 16 bit port size */ \ + BR_MS_GPCM | /* MSEL = GPCM */ \ BR_V) #define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX | OR_GPCM_EAD) + OR_GPCM_TRLX_SET | OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -123,15 +124,16 @@ */ /* Window base at flash base */ #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001A /* 128MB window size */ +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ - (1 << BR_PS_SHIFT) | /* 8 bit port size */ \ + BR_PS_8 | /* 8 bit port size */ \ + BR_MS_GPCM | /* MSEL = GPCM */ \ BR_V) #define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) | \ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX | OR_GPCM_EAD) + OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * Serial Port diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index c04bde9..6b5a6fe 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -137,15 +137,16 @@ * PAXE on the local bus CS3 */ #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */ +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_512MB) #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PAXE_BASE | \ - (1 << BR_PS_SHIFT) | /* 8 bit port size */ \ + BR_PS_8 | /* 8 bit port size */ \ + BR_MS_GPCM | /* MSEL = GPCM */ \ BR_V) #define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX | OR_GPCM_EAD) + OR_GPCM_TRLX_SET | OR_GPCM_EAD) /* * MMU Setup diff --git a/include/configs/kmsupx5.h b/include/configs/kmsupx5.h index ccc1561..b0dd88c 100644 --- a/include/configs/kmsupx5.h +++ b/include/configs/kmsupx5.h @@ -69,8 +69,8 @@ OR_GPCM_CSNT | \ OR_GPCM_ACS_DIV4 | \ OR_GPCM_SCY_2 | \ - (OR_GPCM_TRLX & \ - (~OR_GPCM_EHTR)) | /* EHTR = 0 */ \ + OR_GPCM_TRLX_SET | \ + OR_GPCM_EHTR_CLEAR | \ OR_GPCM_EAD) /* LPXF: icache cacheable, but dcache-inhibit and guarded */ diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index fbce800..20fc641 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -248,18 +248,18 @@ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE /* Flash Base addr */ \ - | (2 << BR_PS_SHIFT) /* 16 bit port */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ | OR_UPM_XAM \ | OR_GPCM_CSNT \ | OR_GPCM_ACS_DIV2 \ | OR_GPCM_XACS \ | OR_GPCM_SCY_4 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ - | OR_GPCM_EAD) + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 @@ -274,11 +274,12 @@ */ #define CONFIG_SYS_SJA1000_BASE 0xFBFF0000 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_SJA1000_BASE \ - | (1 << BR_PS_SHIFT) /* 8 bit port */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 /* length 32K */ \ + | BR_PS_8 /* 8 bit port size */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ | OR_GPCM_SCY_5 \ - | OR_GPCM_EHTR) + | OR_GPCM_EHTR_SET) /* 0xFFFF8052 */ #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_SJA1000_BASE @@ -289,11 +290,12 @@ */ #define CONFIG_SYS_CPLD_BASE 0xFBFF8000 #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_CPLD_BASE \ - | (1 << BR_PS_SHIFT) /* 8 bit port */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR2_PRELIM (0xFFFF8000 /* length 32K */ \ + | BR_PS_8 /* 8 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB \ | OR_GPCM_SCY_4 \ - | OR_GPCM_EHTR) + | OR_GPCM_EHTR_SET) /* 0xFFFF8042 */ #define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_CPLD_BASE diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 99f8fb7..4812f68 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -136,8 +136,8 @@ /* * SDRAM on the Local Bus */ -#define CONFIG_SYS_LBC_SDRAM_BASE 0x10000000 /* Localbus SDRAM */ -#define CONFIG_SYS_LBC_SDRAM_SIZE 128 /* LBC SDRAM is 128MB */ +#define CONFIG_SYS_LBC_SDRAM_BASE 0xF0000000 /* Localbus SDRAM */ +#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ /* * FLASH on the Local Bus @@ -148,14 +148,25 @@ #define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */ /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | (2 << BR_PS_SHIFT) /* 16 bit port */ \ - | BR_V) /* valid */ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ + | BR_PS_16 /* 16 bit port */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ + +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xFF806FF7 */ -#define CONFIG_SYS_OR0_PRELIM 0xFF806FF7 /* 8 MB flash size */ /* window base at flash base */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ @@ -212,15 +223,15 @@ * * 0 4 8 12 16 20 24 28 * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 - * - * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into - * FIXME: the top 17 bits of BR2. */ - /* Port-size=32bit, MSEL=SDRAM */ -#define CONFIG_SYS_BR2_PRELIM 0xF0001861 -#define CONFIG_SYS_LBLAWBAR2_PRELIM 0xF0000000 -#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000019 /* 64M */ +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LBC_SDRAM_BASE \ + | BR_PS_32 \ + | BR_MS_SDRAM \ + | BR_V) + /* 0xF0001861 */ +#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_LBC_SDRAM_BASE +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. @@ -236,7 +247,12 @@ * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901 */ -#define CONFIG_SYS_OR2_PRELIM 0xFC006901 +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_LBC_SDRAM_SIZE) \ + | OR_SDRAM_XAM \ + | ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \ + | ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \ + | OR_SDRAM_EAD) + /* 0xFC006901 */ /* LB sdram refresh timer, about 6us */ #define CONFIG_SYS_LBC_LSRT 0x32000000 @@ -615,12 +631,15 @@ | BATU_VS \ | BATU_VP) -/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ -#define CONFIG_SYS_IBAT6L (0xF0000000 \ +/* LBC SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CONFIG_SYS_IBAT6L (CONFIG_SYS_LBC_SDRAM_BASE \ | BATL_PP_RW \ | BATL_MEMCOHERENCE \ | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT6U (CONFIG_SYS_LBC_SDRAM_BASE \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP) #define CONFIG_SYS_IBAT7L (0) #define CONFIG_SYS_IBAT7U (0) diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h index 5f2e1e3..ae19701 100644 --- a/include/configs/suvd3.h +++ b/include/configs/suvd3.h @@ -70,7 +70,7 @@ OR_GPCM_CSNT | \ OR_GPCM_ACS_DIV4 | \ OR_GPCM_SCY_3 | \ - OR_GPCM_TRLX) + OR_GPCM_TRLX_SET) #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ diff --git a/include/configs/tuda1.h b/include/configs/tuda1.h index 7ae7d58..577bbd0 100644 --- a/include/configs/tuda1.h +++ b/include/configs/tuda1.h @@ -73,8 +73,8 @@ OR_GPCM_CSNT | \ OR_GPCM_ACS_DIV4 | \ OR_GPCM_SCY_2 | \ - (OR_GPCM_TRLX & \ - (~OR_GPCM_EHTR)) | /* EHTR = 0 */ \ + OR_GPCM_TRLX_SET | \ + OR_GPCM_EHTR_CLEAR | \ OR_GPCM_EAD) /* * PINC3 on the local bus CS3 @@ -91,11 +91,10 @@ #define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ OR_GPCM_CSNT | \ - (OR_GPCM_ACS_DIV2 & /* ACS = 11 */\ - (~OR_GPCM_XACS)) | /* XACS = 0 */\ - (OR_GPCM_SCY_2 & \ - (~OR_GPCM_EHTR)) | /* EHTR = 0 */ \ - OR_GPCM_TRLX) + OR_GPCM_ACS_DIV2 | \ + OR_GPCM_SCY_2 | \ + OR_GPCM_TRLX_SET | \ + OR_GPCM_EHTR_CLEAR) #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ diff --git a/include/configs/tuxa1.h b/include/configs/tuxa1.h index 815c260..2d9af3f 100644 --- a/include/configs/tuxa1.h +++ b/include/configs/tuxa1.h @@ -67,8 +67,8 @@ OR_GPCM_CSNT | \ OR_GPCM_ACS_DIV4 | \ OR_GPCM_SCY_2 | \ - (OR_GPCM_TRLX & \ - (~OR_GPCM_EHTR)) | /* EHTR = 0 */ \ + OR_GPCM_TRLX_SET | \ + OR_GPCM_EHTR_CLEAR | \ OR_GPCM_EAD) /* * PINC2 on the local bus CS3 @@ -85,11 +85,10 @@ #define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_PINC2_SIZE) | \ OR_GPCM_CSNT | \ - (OR_GPCM_ACS_DIV2 & /* ACS = 11 */ \ - (~OR_GPCM_XACS)) | /* XACS = 0 */ \ - (OR_GPCM_SCY_2 & \ - (~OR_GPCM_EHTR)) | /* EHTR = 0 */ \ - OR_GPCM_TRLX) + OR_GPCM_ACS_DIV2 | \ + OR_GPCM_SCY_2 | \ + OR_GPCM_TRLX_SET | \ + OR_GPCM_EHTR_CLEAR) #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 69f29c7..1d45889 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -146,18 +146,19 @@ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ #define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \ - | (2 << BR_PS_SHIFT) /* 16 bit */ \ - | BR_V) /* valid */ + | BR_PS_16 /* 16 bit */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ #define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ | OR_GPCM_CSNT \ | OR_GPCM_ACS_DIV4 \ | OR_GPCM_SCY_5 \ - | OR_GPCM_TRLX \ + | OR_GPCM_TRLX_SET \ | OR_GPCM_EAD) /* 0xfe000c55 */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32 MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per dev */ @@ -209,7 +210,7 @@ | BR_MS_FCM \ | BR_V) /* valid */ /* 0x61000c21 */ -#define CONFIG_SYS_NAND_OR_PRELIM (0xffff8000 \ +#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ | OR_FCM_BCTLD \ | OR_FCM_CHT \ | OR_FCM_SCY_2 \ @@ -223,7 +224,7 @@ #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM @@ -233,12 +234,12 @@ | BR_PS_8 \ | BR_V) /* 0x60000801 */ -#define CONFIG_SYS_OR2_PRELIM (0xfffe0000 \ +#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB \ | OR_GPCM_CSNT \ | OR_GPCM_XACS \ | OR_GPCM_SCY_3 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) /* 0xfffe0937 */ /* local bus read write buffer mapping SRAM@0x64000000 */ @@ -247,12 +248,12 @@ | BR_V) /* 0x62001001 */ -#define CONFIG_SYS_OR3_PRELIM (0xfe000000 \ +#define CONFIG_SYS_OR3_PRELIM (OR_AM_32MB \ | OR_GPCM_CSNT \ | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EHTR \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ | OR_GPCM_EAD) /* 0xfe0009f7 */ diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 8e9b1f0..67a5c89 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -123,29 +123,56 @@ #define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */ #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - (2 << BR_PS_SHIFT) | /* 16bit */ \ - BR_V) /* valid */ - -#define CONFIG_SYS_OR0_PRELIM 0xffc06ff7 /* 4 MB flash size */ + BR_PS_16 | /* 16bit */ \ + BR_MS_GPCM | /* MSEL = GPCM */ \ + BR_V) /* valid */ + +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xffc06ff7 */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000015 /* 4 MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_4MB) #else #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */ #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - (2 << BR_PS_SHIFT) | /* 16bit */ \ - BR_V) /* valid */ - -#define CONFIG_SYS_OR0_PRELIM 0xf8006ff7 /* 128 MB flash size */ + BR_PS_16 | /* 16bit */ \ + BR_MS_GPCM | /* MSEL = GPCM */ \ + BR_V) /* valid */ + +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xf8006ff7 */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001a /* 128 MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) #endif /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ -#define CONFIG_SYS_BR1_PRELIM (0xf0000000 | 0x00001801) -#define CONFIG_SYS_OR1_PRELIM (0xfffc0008 | 0x00000200) -#define CONFIG_SYS_LBLAWBAR1_PRELIM 0xf0000000 -#define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x00000011) +#define CONFIG_SYS_WINDOW1_BASE 0xf0000000 +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_WINDOW1_BASE \ + | BR_PS_32 \ + | BR_MS_GPCM \ + | BR_V) + /* 0xF0001801 */ +#define CONFIG_SYS_OR1_PRELIM (OR_AM_256KB \ + | OR_GPCM_SETA) + /* 0xfffc0208 */ +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_WINDOW1_BASE +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_256KB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/ |