summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/actux1.h226
-rw-r--r--include/configs/actux2.h206
-rw-r--r--include/configs/actux3.h205
-rw-r--r--include/configs/actux4.h204
-rw-r--r--include/configs/dvlhost.h222
5 files changed, 0 insertions, 1063 deletions
diff --git a/include/configs/actux1.h b/include/configs/actux1.h
deleted file mode 100644
index 9b8bd78..0000000
--- a/include/configs/actux1.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * Configuration settings for the AcTux-1 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IXP425 1
-#define CONFIG_ACTUX1 1
-
-#define CONFIG_MACH_TYPE 1479
-
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_SYS_LDSCRIPT "board/actux1/u-boot.lds"
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command line configuration. */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#define CONFIG_PCI_PNP
-#define CONFIG_IXP_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI_ENUM
-#endif
-
-#define CONFIG_BOOTCOMMAND "run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_REVISION_TAG 1
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_KGDB_BAUDRATE 230400
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000
-#define CONFIG_SYS_MEMTEST_END 0x00800000
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK 66666666
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0x00010000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200, 230400 }
-#define CONFIG_SERIAL_RTS_ACTIVE 1
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0 0xbd113842
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x00000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#ifdef CONFIG_RAM_32MB
-# define CONFIG_SYS_SDR_CONFIG 0x18
-# define PHYS_SDRAM_1_SIZE 0x02000000
-# define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
-# define CONFIG_SYS_SDR_MODE_CONFIG 0x1
-# define CONFIG_SYS_DRAM_SIZE 0x02000000
-#else /* 16MB SDRAM */
-# define CONFIG_SYS_SDR_CONFIG 0x3A
-# define PHYS_SDRAM_1_SIZE 0x01000000
-# define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
-# define CONFIG_SYS_SDR_MODE_CONFIG 0x1
-# define CONFIG_SYS_DRAM_SIZE 0x01000000
-#endif
-
-/* FLASH organization */
-#define CONFIG_SYS_TEXT_BASE 0x50000000
-#ifdef CONFIG_FLASH2X2
-# define CONFIG_SYS_MAX_FLASH_BANKS 2
-/* max number of sectors on one chip */
-# define CONFIG_SYS_MAX_FLASH_SECT 40
-# define PHYS_FLASH_1 0x50000000
-# define PHYS_FLASH_2 0x50200000
-# define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
-#endif
-#ifdef CONFIG_FLASH1X8
-# define CONFIG_SYS_MAX_FLASH_BANKS 1
-/* max number of sectors on one chip */
-# define CONFIG_SYS_MAX_FLASH_SECT 140
-# define PHYS_FLASH_1 0x50000000
-# define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
-#endif
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_BOARD_SIZE_LIMIT 262144
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE 1
-/* NPE0 PHY address */
-#define CONFIG_PHY_ADDR 0
-/* NPE1 PHY address (HW Release E only) */
-#define CONFIG_PHY1_ADDR 1
-/* MII PHY management */
-#define CONFIG_MII 1
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER 16
-#define CONFIG_RESET_PHY_R 1
-
-#define CONFIG_HAS_ETH1 1
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef CONFIG_CMD_NFS
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/*
- * environment organization:
- * one flash sector, embedded in uboot area (bottom bootblock flash)
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000)
-#define CONFIG_SYS_USE_PPCENV 1
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "npe_ucode=50040000\0" \
- "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
- "kerneladdr=50050000\0" \
- "kernelfile=actux1/uImage\0" \
- "rootfile=actux1/rootfs\0" \
- "rootaddr=50170000\0" \
- "loadaddr=10000\0" \
- "updateboot_ser=mw.b 10000 ff 40000;" \
- " loady ${loadaddr};" \
- " run eraseboot writeboot\0" \
- "updateboot_net=mw.b 10000 ff 40000;" \
- " tftp ${loadaddr} actux1/u-boot.bin;" \
- " run eraseboot writeboot\0" \
- "eraseboot=protect off 50000000 50003fff;" \
- " protect off 50006000 5003ffff;" \
- " erase 50000000 50003fff;" \
- " erase 50006000 5003ffff\0" \
- "writeboot=cp.b 10000 50000000 4000;" \
- " cp.b 16000 50006000 3a000\0" \
- "updateucode=loady;" \
- " era ${npe_ucode} +${filesize};" \
- " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
- "updateroot=tftp ${loadaddr} ${rootfile};" \
- " era ${rootaddr} +${filesize};" \
- " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
- "updatekern=tftp ${loadaddr} ${kernelfile};" \
- " era ${kerneladdr} +${filesize};" \
- " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
- "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \
- "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
- "boot_flash=run flashargs addtty addeth;" \
- " bootm ${kerneladdr}\0" \
- "boot_net=run netargs addtty addeth;" \
- " tftpboot ${loadaddr} ${kernelfile};" \
- " bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
deleted file mode 100644
index f0cbff7..0000000
--- a/include/configs/actux2.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * Configuration settings for the AcTux-2 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IXP425 1
-#define CONFIG_ACTUX2 1
-
-#define CONFIG_MACH_TYPE 1480
-
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_SYS_LDSCRIPT "board/actux2/u-boot.lds"
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command line configuration. */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#undef CONFIG_CMD_PCI
-#undef CONFIG_PCI
-
-#define CONFIG_BOOTCOMMAND "run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_REVISION_TAG 1
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_KGDB_BAUDRATE 230400
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000
-#define CONFIG_SYS_MEMTEST_END 0x00800000
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK 66666666
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0x00010000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200, 230400 }
-#define CONFIG_SERIAL_RTS_ACTIVE 1
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0 0xbd113042
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x00000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-/* 16MB SDRAM */
-#define CONFIG_SYS_SDR_CONFIG 0x3A
-#define PHYS_SDRAM_1_SIZE 0x01000000
-#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
-#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
-#define CONFIG_SYS_DRAM_SIZE 0x01000000
-
-/* FLASH organization */
-#define CONFIG_SYS_TEXT_BASE 0x50000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT 140
-#define PHYS_FLASH_1 0x50000000
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_BOARD_SIZE_LIMIT 262144
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE 1
-/* NPE0 PHY address */
-#define CONFIG_PHY_ADDR 0x00
-/* MII PHY management */
-#define CONFIG_MII 1
-/* fixed-speed switch without standard PHY registers on MII */
-#define CONFIG_MII_NPE0_FIXEDLINK 1
-#define CONFIG_MII_NPE0_SPEED 100
-#define CONFIG_MII_NPE0_FULLDUPLEX 1
-
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER 16
-#define CONFIG_RESET_PHY_R 1
-/* ethernet switch connected to MII port */
-#define CONFIG_MII_ETHSWITCH 1
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef CONFIG_CMD_NFS
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/*
- * environment organization:
- * one flash sector, embedded in uboot area (bottom bootblock flash)
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000)
-#define CONFIG_SYS_USE_PPCENV 1
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "npe_ucode=50040000\0" \
- "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
- "kerneladdr=50050000\0" \
- "kernelfile=actux2/uImage\0" \
- "rootfile=actux2/rootfs\0" \
- "rootaddr=50170000\0" \
- "loadaddr=10000\0" \
- "updateboot_ser=mw.b 10000 ff 40000;" \
- " loady ${loadaddr};" \
- " run eraseboot writeboot\0" \
- "updateboot_net=mw.b 10000 ff 40000;" \
- " tftp ${loadaddr} actux2/u-boot.bin;" \
- " run eraseboot writeboot\0" \
- "eraseboot=protect off 50000000 50003fff;" \
- " protect off 50006000 5003ffff;" \
- " erase 50000000 50003fff;" \
- " erase 50006000 5003ffff\0" \
- "writeboot=cp.b 10000 50000000 4000;" \
- " cp.b 16000 50006000 3a000\0" \
- "updateucode=loady;" \
- " era ${npe_ucode} +${filesize};" \
- " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
- "updateroot=tftp ${loadaddr} ${rootfile};" \
- " era ${rootaddr} +${filesize};" \
- " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
- "updatekern=tftp ${loadaddr} ${kernelfile};" \
- " era ${kerneladdr} +${filesize};" \
- " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
- "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
- "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
- "boot_flash=run flashargs addtty addeth;" \
- " bootm ${kerneladdr}\0" \
- "boot_net=run netargs addtty addeth;" \
- " tftpboot ${loadaddr} ${kernelfile};" \
- " bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/actux3.h b/include/configs/actux3.h
deleted file mode 100644
index 7639107..0000000
--- a/include/configs/actux3.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * Configuration settings for the AcTux-3 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IXP425 1
-#define CONFIG_ACTUX3 1
-
-#define CONFIG_MACH_TYPE 1481
-
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_SYS_LDSCRIPT "board/actux3/u-boot.lds"
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command line configuration. */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-
-#define CONFIG_BOOTCOMMAND "run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_REVISION_TAG 1
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_KGDB_BAUDRATE 230400
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000
-#define CONFIG_SYS_MEMTEST_END 0x00800000
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK 66666666
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0x00010000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200, 230400 }
-#define CONFIG_SERIAL_RTS_ACTIVE 1
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0 0xbd113442
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x00000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-/* 16MB SDRAM */
-#define CONFIG_SYS_SDR_CONFIG 0x3A
-#define PHYS_SDRAM_1_SIZE 0x01000000
-#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
-#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
-#define CONFIG_SYS_DRAM_SIZE 0x01000000
-
-/* FLASH organization */
-#define CONFIG_SYS_TEXT_BASE 0x50000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT 140
-#define PHYS_FLASH_1 0x50000000
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_BOARD_SIZE_LIMIT 262144
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE 1
-
-/* NPE0 PHY address */
-#define CONFIG_PHY_ADDR 0x10
-/* MII PHY management */
-#define CONFIG_MII 1
-/* fixed-speed switch without standard PHY registers on MII */
-#define CONFIG_MII_NPE0_FIXEDLINK 1
-#define CONFIG_MII_NPE0_SPEED 100
-#define CONFIG_MII_NPE0_FULLDUPLEX 1
-
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER 16
-#define CONFIG_RESET_PHY_R 1
-/* ethernet switch connected to MII port */
-#define CONFIG_MII_ETHSWITCH 1
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef CONFIG_CMD_NFS
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/*
- * environment organization:
- * one flash sector, embedded in uboot area (bottom bootblock flash)
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000)
-#define CONFIG_SYS_USE_PPCENV 1
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "npe_ucode=50040000\0" \
- "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
- "kerneladdr=50050000\0" \
- "kernelfile=actux3/uImage\0" \
- "rootfile=actux3/rootfs\0" \
- "rootaddr=50170000\0" \
- "loadaddr=10000\0" \
- "updateboot_ser=mw.b 10000 ff 40000;" \
- " loady ${loadaddr};" \
- " run eraseboot writeboot\0" \
- "updateboot_net=mw.b 10000 ff 40000;" \
- " tftp ${loadaddr} actux3/u-boot.bin;" \
- " run eraseboot writeboot\0" \
- "eraseboot=protect off 50000000 50003fff;" \
- " protect off 50006000 5003ffff;" \
- " erase 50000000 50003fff;" \
- " erase 50006000 5003ffff\0" \
- "writeboot=cp.b 10000 50000000 4000;" \
- " cp.b 16000 50006000 3a000\0" \
- "updateucode=loady;" \
- " era ${npe_ucode} +${filesize};" \
- " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
- "updateroot=tftp ${loadaddr} ${rootfile};" \
- " era ${rootaddr} +${filesize};" \
- " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
- "updatekern=tftp ${loadaddr} ${kernelfile};" \
- " era ${kerneladdr} +${filesize};" \
- " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
- "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \
- "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
- "boot_flash=run flashargs addtty addeth;" \
- " bootm ${kerneladdr}\0" \
- "boot_net=run netargs addtty addeth;" \
- " tftpboot ${loadaddr} ${kernelfile};" \
- " bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/actux4.h b/include/configs/actux4.h
deleted file mode 100644
index 12bd98a..0000000
--- a/include/configs/actux4.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * Configuration settings for the AcTux-4 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IXP425 1
-#define CONFIG_ACTUX4 1
-
-#define CONFIG_MACH_TYPE 1532
-
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-#define CONFIG_BOARD_EARLY_INIT_F 1
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command line configuration */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-
-#define CONFIG_PCI
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#define CONFIG_PCI_PNP
-#define CONFIG_IXP_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI_ENUM
-#endif
-
-#define CONFIG_BOOTCOMMAND "run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_KGDB_BAUDRATE 230400
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000
-#define CONFIG_SYS_MEMTEST_END 0x00800000
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK 66000000
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0x00010000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200, 230400 }
-#define CONFIG_SERIAL_RTS_ACTIVE 1
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0 0xbd113003
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x00000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-/* 32MB SDRAM */
-#define CONFIG_SYS_SDR_CONFIG 0x18
-#define PHYS_SDRAM_1_SIZE 0x02000000
-#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
-#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
-#define CONFIG_SYS_DRAM_SIZE 0x02000000
-
-/* FLASH organization */
-#define CONFIG_SYS_TEXT_BASE 0x50000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
-/* max # of sectors per chip */
-#define CONFIG_SYS_MAX_FLASH_SECT 70
-#define PHYS_FLASH_1 0x50000000
-#define PHYS_FLASH_2 0x51000000
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (252 << 10)
-#define CONFIG_BOARD_SIZE_LIMIT 258048
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* board provides its own flash_init code */
-#define CONFIG_FLASH_CFI_LEGACY 1
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-/* SST 39VF020 etc. support */
-#define CONFIG_SYS_FLASH_LEGACY_256Kx8 1
-
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE 1
-
-/* NPE0 PHY address */
-#define CONFIG_PHY_ADDR 0x1C
-/* MII PHY management */
-#define CONFIG_MII 1
-
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER 16
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef CONFIG_CMD_NFS
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/* environment organization: one complete 4k flash sector */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x1000
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x3f000)
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "npe_ucode=51000000\0" \
- "mtd=IXP4XX-Flash.0:252k(uboot),4k(uboot_env);" \
- "IXP4XX-Flash.1:128k(ucode),1280k(linux),-(root)\0" \
- "kerneladdr=51020000\0" \
- "kernelfile=actux4/uImage\0" \
- "rootfile=actux4/rootfs\0" \
- "rootaddr=51160000\0" \
- "loadaddr=10000\0" \
- "updateboot_ser=mw.b 10000 ff 40000;" \
- " loady ${loadaddr};" \
- " run eraseboot writeboot\0" \
- "updateboot_net=mw.b 10000 ff 40000;" \
- " tftp ${loadaddr} actux4/u-boot.bin;" \
- " run eraseboot writeboot\0" \
- "eraseboot=protect off 50000000 5003efff;" \
- " erase 50000000 +${filesize}\0" \
- "writeboot=cp.b 10000 50000000 ${filesize}\0" \
- "updateucode=loady;" \
- " era ${npe_ucode} +${filesize};" \
- " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
- "updateroot=tftp ${loadaddr} ${rootfile};" \
- " era ${rootaddr} +${filesize};" \
- " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
- "updatekern=tftp ${loadaddr} ${kernelfile};" \
- " era ${kerneladdr} +${filesize};" \
- " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
- "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
- "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
- "boot_flash=run flashargs addtty addeth;" \
- " bootm ${kerneladdr}\0" \
- "boot_net=run netargs addtty addeth;" \
- " tftpboot ${loadaddr} ${kernelfile};" \
- " bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h
deleted file mode 100644
index 1af7f16..0000000
--- a/include/configs/dvlhost.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * (C) Copyright 2009
- * Michael Schwingen, michael@schwingen.org
- *
- * Configuration settings for the
- * dLAN200 AV Wireless G ("dvlhost") board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IXP425 1
-#define CONFIG_DVLHOST 1
-
-#define CONFIG_MACH_TYPE 1343
-
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_SYS_LDSCRIPT "board/dvlhost/u-boot.lds"
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command line configuration. */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#define CONFIG_PCI
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#define CONFIG_PCI_PNP
-#define CONFIG_IXP_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI_ENUM
-#endif
-
-#define CONFIG_BOOTCOMMAND "run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_KGDB_BAUDRATE 230400
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000
-#define CONFIG_SYS_MEMTEST_END 0x01D80000
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK 66666666
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0x00010000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200, 230400 }
-#define CONFIG_SERIAL_RTS_ACTIVE 1
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0 0xbd113442
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x00000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-/* 32MB SDRAM: 2* 8Mx16, CL3 */
-#define CONFIG_SYS_SDR_CONFIG 0x18
-#define PHYS_SDRAM_1_SIZE 0x02000000
-#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x800
-#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
-#define CONFIG_SYS_DRAM_SIZE PHYS_SDRAM_1_SIZE
-
-/* FLASH organization: one Spansion S29AL032D-04 Flash */
-#define CONFIG_SYS_TEXT_BASE 0x50000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT 140
-#define PHYS_FLASH_1 0x50000000
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_BOARD_SIZE_LIMIT 262144
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE 1
-
-/* NPE0 PHY: MII dLAN200 AVmodule, 100BaseT-FDX fixed */
-#define CONFIG_PHY_ADDR 0x18
-/* NPE1 PHY: MII IP175 switch, port 5 is host port */
-#define CONFIG_PHY1_ADDR 0x05
-/* MII PHY management */
-#define CONFIG_MII 1
-/* fixed-speed powerline modem without standard PHY registers on MII */
-#define CONFIG_MII_NPE0_FIXEDLINK 1
-#define CONFIG_MII_NPE0_SPEED 100
-#define CONFIG_MII_NPE0_FULLDUPLEX 1
-/* fixed-speed switch without standard PHY registers on MII */
-#define CONFIG_MII_NPE1_FIXEDLINK 1
-#define CONFIG_MII_NPE1_SPEED 100
-#define CONFIG_MII_NPE1_FULLDUPLEX 1
-
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER 16
-#define CONFIG_RESET_PHY_R 1
-/* ethernet switch connected to MII port */
-#define CONFIG_MII_ETHSWITCH 1
-#define CONFIG_HAS_ETH1 1
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef CONFIG_CMD_NFS
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/*
- * environment organization:
- * one flash sector, embedded in uboot area (bottom bootblock flash)
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000)
-#define CONFIG_SYS_USE_PPCENV 1
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "npe_ucode=50040000\0" \
- "ethprime=NPE1\0" \
- "ethrotate=no\0" \
- "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root),\0" \
- "kerneladdr=50050000\0" \
- "kernelfile=dvlhost/uImage\0" \
- "rootfile=dvlhost/rootfs\0" \
- "rootaddr=50170000\0" \
- "loadaddr=10000\0" \
- "updateboot_ser=mw.b 10000 ff 40000;" \
- " loady ${loadaddr};" \
- " run eraseboot writeboot\0" \
- "updateboot_net=mw.b 10000 ff 40000;" \
- " tftp ${loadaddr} dvlhost/u-boot.bin;" \
- " run eraseboot writeboot\0" \
- "eraseboot=protect off 50000000 50003fff;" \
- " protect off 50006000 5003ffff;" \
- " erase 50000000 50003fff;" \
- " erase 50006000 5003ffff\0" \
- "writeboot=cp.b 10000 50000000 4000;" \
- " cp.b 16000 50006000 3a000\0" \
- "updateucode=loady;" \
- " era ${npe_ucode} +${filesize};" \
- " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
- "updateroot=tftp ${loadaddr} ${rootfile};" \
- " era ${rootaddr} +${filesize};" \
- " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
- "updatekern=tftp ${loadaddr} ${kernelfile};" \
- " era ${kerneladdr} +${filesize};" \
- " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
- "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
- " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
- "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
- "boot_flash=run flashargs addtty addeth;" \
- " bootm ${kerneladdr}\0" \
- "boot_net=run netargs addtty addeth;" \
- " tftpboot ${loadaddr} ${kernelfile};" \
- " bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
generated by cgit v1.1 at 2024-12-14 07:42:03 +0000