diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/AmigaOneG3SE.h | 404 |
1 files changed, 0 insertions, 404 deletions
diff --git a/include/configs/AmigaOneG3SE.h b/include/configs/AmigaOneG3SE.h deleted file mode 100644 index 0dfb23b..0000000 --- a/include/configs/AmigaOneG3SE.h +++ /dev/null @@ -1,404 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * - * Configuration settings for the AmigaOneG3SE board. - * - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_AMIGAONEG3SE 1 - -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R 1 - -#define CONFIG_VERY_BIG_RAM 1 - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks passed to Linux in Hz */ - -#define CONFIG_BOOTARGS "root=/dev/ram rw ramdisk_size=4096" - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_AMIGA_PARTITION - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BSP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_NET -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FDC -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_USB -#define CONFIG_CMD_BSP -#define CONFIG_CMD_PCI - - -#define CONFIG_PCI 1 -/* #define CONFIG_PCI_SCAN_SHOW 1 */ -#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ - -#define atoi(x) simple_strtoul(x,NULL,10) - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "] " /* Monitor Command Prompt */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ -/* #undef CONFIG_SYS_HUSH_PARSER */ -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#endif -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -#define CONFIG_SYS_MAXARGS 64 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00500000 /* Default load address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFF00000 -#define CONFIG_SYS_FLASH_MAX_SIZE 0x00080000 -/* Maximum amount of RAM. - */ -#define CONFIG_SYS_MAX_RAM_SIZE 0x80000000 /* 2G */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* Reserve 512 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (2500 << 10) /* Reserve 128 kB for malloc() */ - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_SDRAM_BASE && \ - CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ - -/* Size in bytes reserved for initial data - */ -/* HJF: used to be 0x400000 */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_INIT_RAM_LOCK - -/* - * Temporary buffer for serial data until the real serial driver - * is initialised (memtest will destroy this buffer) - */ -#define CONFIG_SYS_SCONSOLE_ADDR CONFIG_SYS_INIT_RAM_ADDR -#define CONFIG_SYS_SCONSOLE_SIZE 0x0002000 - -/* SDRAM 0 - 256MB - */ - -/*HJF: #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_4M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U*/ - -#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -/* PCI Range - */ -#define CONFIG_SYS_DBAT1L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT1L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT1U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) -/* HJF: -#define CONFIG_SYS_IBAT1L ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR) | BATL_PP_RW) -#define CONFIG_SYS_IBAT1U ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR) | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT1L ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR + 0x20000) | BATL_PP_RW ) -#define CONFIG_SYS_DBAT1U ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR + 0x20000) | BATU_BL_256M | BATU_VS | BATU_VP) -*/ - -/* Init RAM in the CPU DCache (no backing memory) - */ -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -/* This used to be commented out */ -#define CONFIG_SYS_IBAT2L CONFIG_SYS_DBAT2L -/* This here too */ -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U - - -/* I/O and PCI memory at 0xf0000000 - */ -#define CONFIG_SYS_DBAT3L (0xf0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xf0000000 | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - */ -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_BUS_HZ 133000000 /* bus speed - 100 mhz */ -#define CONFIG_SYS_CPU_CLK 133000000 -#define CONFIG_SYS_BUS_CLK 133000000 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* Max number of sectors in one bank */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ - -/* - * Environment is stored in NVRAM. - */ -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_ADDR 0xFD0E0000 /* This should be 0xFD0E0000, but we skip bytes to - * protect softex's settings for now. - * Original 768 bytes where not enough. - */ -#define CONFIG_ENV_SIZE 0x8000 /* Size of the Environment. See comment above */ - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 /* stdin/stdout/stderr are in environment */ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 -#define CONFIG_ENV_OVERWRITE 1 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * L2 cache - */ -#define CONFIG_SYS_L2 -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ - L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) -#define L2_ENABLE (L2_INIT | L2CR_L2E) - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - - -/*----------------------------------------------------------------------- - * IDE ATAPI Configuration - */ - -#define CONFIG_ATAPI 1 -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE 4 -#define CONFIG_ISO_PARTITION 1 - -#define CONFIG_SYS_ATA_BASE_ADDR 0xFE000000 /* was: via_get_base_addr() */ -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1F0 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 - -#define CONFIG_SYS_ATA_REG_OFFSET 0 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0200 - -/*----------------------------------------------------------------------- - * Disk-On-Chip configuration - */ - -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ - -#define CONFIG_SYS_DOC_SUPPORT_2000 -#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM - -/*----------------------------------------------------------------------- - RTC -*/ -#define CONFIG_RTC_MC146818 - -/*----------------------------------------------------------------------- - * NS16550 Configuration - */ - -#define CONFIG_SYS_NS16550 - -#define CONFIG_SYS_NS16550_COM1 0xFE0003F8 -#define CONFIG_SYS_NS16550_COM2 0xFE0002F8 - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -/* base address for ISA I/O - */ -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0xFE000000 - -/* ISA Interrupt stuff (taken from JWL) */ - -#define ISA_INT1_OCW1 0x21 -#define ISA_INT2_OCW1 0xA1 -#define ISA_INT1_OCW2 0x20 -#define ISA_INT2_OCW2 0xA0 -#define ISA_INT1_OCW3 0x20 -#define ISA_INT2_OCW3 0xA0 - -#define ISA_INT1_ICW1 0x20 -#define ISA_INT2_ICW1 0xA0 -#define ISA_INT1_ICW2 0x21 -#define ISA_INT2_ICW2 0xA1 -#define ISA_INT1_ICW3 0x21 -#define ISA_INT2_ICW3 0xA1 -#define ISA_INT1_ICW4 0x21 -#define ISA_INT2_ICW4 0xA1 - - -/* - * misc - */ - -#define CONFIG_NET_MULTI -#define CONFIG_SYS_BOARD_ASM_INIT -#define CONFIG_LAST_STAGE_INIT - -/* #define CONFIG_ETHADDR 00:09:D2:10:00:76 */ -/* #define CONFIG_IPADDR 192.168.0.2 */ -/* #define CONFIG_NETMASK 255.255.255.240 */ -/* #define CONFIG_GATEWAYIP 192.168.0.3 */ - -#define CONFIG_3COM -/* #define CONFIG_BOOTP_RANDOM_DELAY */ - -/* - * USB configuration - */ -#define CONFIG_USB_UHCI 1 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_USB_KEYBOARD 1 -#define CONFIG_SYS_STDIO_DEREGISTER 1 /* needed by CONFIG_USB_KEYBOARD */ - -/* - * Autoboot stuff - */ -#define CONFIG_BOOTDELAY 5 /* Boot automatically after five seconds */ -#define CONFIG_PREBOOT "" -#define CONFIG_BOOTCOMMAND "fdcboot; diskboot" -#define CONFIG_MENUPROMPT \ - "Press any key to interrupt autoboot: %2d ", bootdelay -#define CONFIG_MENUKEY ' ' -#define CONFIG_MENUCOMMAND "menu" -/* #define CONFIG_AUTOBOOT_KEYED */ - -/* - * Extra ENV stuff - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "stdout=vga\0" \ - "stdin=ps2kbd\0" \ - "ide_doreset=on\0" \ - "ide_maxbus=2\0" \ - "ide_cd_timeout=30\0" \ - "menucmd=menu\0" \ - "pci_irqa=9\0" \ - "pci_irqa_select=edge\0" \ - "pci_irqb=10\0" \ - "pci_irqb_select=edge\0" \ - "pci_irqc=11\0" \ - "pci_irqc_select=edge\0" \ - "pci_irqd=7\0" \ - "pci_irqd_select=edge\0" - - -/* #define CONFIG_MII 1 */ -/* #define CONFIG_BITBANGMII 1 */ - - -#endif /* __CONFIG_H */ |