diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/lsxl.h | 40 |
1 files changed, 31 insertions, 9 deletions
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 97a8bb7..f5f4961 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -66,6 +66,7 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_CMD_USB +#define CONFIG_CMD_FS_GENERIC #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION @@ -109,20 +110,41 @@ #define CONFIG_LOADADDR 0x00800000 #define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}" #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2" + +#if defined(CONFIG_LSXHL) +#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" +#elif defined(CONFIG_LSCHLV2) +#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" +#else +#error "Unsupported board" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "bootsource=hdd\0" \ + "bootsource=legacy\0" \ "hdpart=0:1\0" \ - "bootcmd_net=bootp 0x00100000 uImage " \ - "&& tftpboot 0x00800000 uInitrd " \ + "kernel_addr=0x00800000\0" \ + "ramdisk_addr=0x01000000\0" \ + "fdt_addr=0x01ff0000\0" \ + "bootcmd_legacy=ide reset " \ + "&& load ide ${hdpart} 0x00100000 /uImage.buffalo " \ + "&& load ide ${hdpart} 0x00800000 /initrd.buffalo " \ "&& bootm 0x00100000 0x00800000\0" \ + "bootcmd_net=bootp ${kernel_addr} uImage " \ + "&& tftpboot ${ramdisk_addr} uInitrd " \ + "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ + "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "bootcmd_hdd=ide reset " \ - "&& ext2load ide ${hdpart} 0x00100000 /uImage " \ - "&& ext2load ide ${hdpart} 0x00800000 /uInitrd " \ - "&& bootm 0x00100000 0x00800000\0" \ + "&& load ide ${hdpart} ${kernel_addr} /uImage " \ + "&& load ide ${hdpart} ${ramdisk_addr} /uInitrd " \ + "&& load ide ${hdpart} ${fdt_addr} " \ + "/" CONFIG_FDTFILE " " \ + "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "bootcmd_usb=usb start " \ - "&& fatload usb 0:1 0x00100000 /uImage " \ - "&& fatload usb 0:1 0x00800000 /uInitrd " \ - "&& bootm 0x00100000 0x00800000\0" \ + "&& load usb 0:1 ${kernel_addr} /uImage " \ + "&& load usb 0:1 ${ramdisk_addr} /uInitrd " \ + "&& load usb 0:1 ${fdt_addr} " \ + "/" CONFIG_FDTFILE " " \ + "&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ "eraseenv=sf probe 0 " \ "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ |