diff options
Diffstat (limited to 'include')
35 files changed, 231 insertions, 547 deletions
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index be2f207..d99d671 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -112,6 +112,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT diff --git a/include/configs/igep0033.h b/include/configs/am335x_igep0033.h index 3e18a65..3e18a65 100644 --- a/include/configs/igep0033.h +++ b/include/configs/am335x_igep0033.h diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index e158b0d..27e32e2 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -154,6 +154,7 @@ * USB Config */ #define CONFIG_USB_ATMEL 1 +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW 1 #define CONFIG_USB_KEYBOARD 1 #define CONFIG_USB_STORAGE 1 diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index d7fd6b0..248d6ee 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -185,6 +185,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index af56604..819ae72 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -146,6 +146,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 40e167c..e3faec7 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -279,6 +279,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW 1 #define CONFIG_DOS_PARTITION 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 28a7925..4cdaed1 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -83,6 +83,7 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_MMC #define CONFIG_CMD_FAT +#define CONFIG_CMD_USB #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x20000000 @@ -163,6 +164,18 @@ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END 0x26e00000 +/* USB host */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9n12" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_USB_STORAGE +#endif + #ifdef CONFIG_SYS_USE_SPIFLASH /* bootstrap + u-boot + env + linux in dataflash on CS0 */ diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 4a2ac9a..cb57be0 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -159,13 +159,14 @@ #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 #else +#define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_UPLL #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9x5" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 #endif -#define CONFIG_USB_ATMEL #define CONFIG_USB_STORAGE #endif diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index bc5b66c..eff35b9 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -23,6 +23,7 @@ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP_GPIO +#define CONFIG_CMD_GPIO #define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */ #define CONFIG_OMAP_COMMON @@ -169,7 +170,7 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ /* Environment information */ -#define CONFIG_BOOTDELAY 10 +#define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index 5b79ace..796dfc3 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -346,6 +346,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index 6742dbc..67732de 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -160,6 +160,7 @@ #if defined(CONFIG_CMD_USB) #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE #define CONFIG_DOS_PARTITION diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 3a4c06b..7186ce7 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -22,9 +22,14 @@ #define CONFIG_SYS_REDUNDAND_ENVIRONMENT #define CONFIG_CMD_SAVEENV +#if (CONFIG_CONS_INDEX == 1) #define CONSOLEDEV "ttyO0" -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 UART1_BASE +#elif (CONFIG_CONS_INDEX == 3) +#define CONSOLEDEV "ttyO2" +#endif +#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ +#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ +#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_OMAP_ABE_SYSCK diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index b8e672f..5c2c73a 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -36,7 +36,7 @@ #define CONFIG_SYS_TEXT_BASE 0x00000000 #else #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0x21f00000 +#define CONFIG_SYS_TEXT_BASE 0x21800000 #endif #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ #define CONFIG_STANDALONE_LOAD_ADDR 0x21000000 @@ -133,6 +133,7 @@ #define CONFIG_CMD_UBI #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_UBIFS + #define CONFIG_SYS_LONGHELP /* @@ -162,6 +163,7 @@ * Hardware drivers */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_AT91C_PQFP_UHPBUG #define CONFIG_USB_STORAGE diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index adf14be..7fd0b51 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -178,6 +178,7 @@ /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 82d4298..155663e 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -122,13 +122,13 @@ (3 << DV_DDR_SDCR_IBANK_SHIFT) | \ (2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) -#define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(2) | \ +#define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(1) | \ DAVINCI_ABCR_WSTROBE(2) | \ - DAVINCI_ABCR_WHOLD(1) | \ + DAVINCI_ABCR_WHOLD(0) | \ DAVINCI_ABCR_RSETUP(1) | \ - DAVINCI_ABCR_RSTROBE(4) | \ - DAVINCI_ABCR_RHOLD(0) | \ - DAVINCI_ABCR_TA(1) | \ + DAVINCI_ABCR_RSTROBE(2) | \ + DAVINCI_ABCR_RHOLD(1) | \ + DAVINCI_ABCR_TA(0) | \ DAVINCI_ABCR_ASIZE_8BIT) @@ -161,6 +161,7 @@ #undef CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST +#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) @@ -173,11 +174,10 @@ CONFIG_SYS_MALLOC_LEN - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_NAND_ECCPOS { \ - 24, 25, 26, 27, 28, \ - 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ - 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ - 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ - 59, 60, 61, 62, 63 } + 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \ + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, \ + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \ + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63} #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 #define CONFIG_SYS_NAND_ECCSIZE 512 @@ -230,15 +230,24 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS \ - "mem=128M console=ttyS0,115200n8 root=/dev/mtdblock0p4 rw noinitrd ip=dhcp" -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 2 #define CONFIG_EXTRA_ENV_SETTINGS \ + "defbootargs=setenv bootargs mem=128M console=ttyS0,115200n8 " \ + "root=/dev/mtdblock5 rw noinitrd " \ + "rootfstype=jffs2 noinitrd\0" \ "hwconfig=dsp:wake=yes\0" \ + "bootcmd=nboot kernel;run defbootargs addmtd;bootm 0xc0700000\0" \ + "bootfile=uImage\0" \ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "mtddevname=uboot-env\0" \ + "mtddevnum=0\0" \ "mtdids=" MTDIDS_DEFAULT "\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "u-boot=/tftpboot/ipam390/u-boot.ais\0" \ + "upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;" \ + "nand write c0000000 20000 ${filesize}\0" \ "setbootparms=nand read c0100000 200000 400000;" \ + "run defbootargs addmtd;" \ "spl export atags c0100000;" \ "nand erase.part bootparms;" \ "nand write c0000100 180000 20000\0" \ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index d2ec83c..46a8e01 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -157,6 +157,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT diff --git a/include/configs/igep00x0.h b/include/configs/omap3_igep00x0.h index e92bb68..e92bb68 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/omap3_igep00x0.h diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index e9f2383..ea56eeb 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -15,82 +15,61 @@ /* * High Level Configuration Options */ -#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP44XX 1 /* which is a 44XX */ #define CONFIG_OMAP4430 1 /* which is in a 4430 */ -#define CONFIG_OMAP_GPIO -#define CONFIG_OMAP_COMMON +#define CONFIG_MISC_INIT_R +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +#define CONFIG_SYS_THUMB_BUILD + +#ifndef CONFIG_SYS_L2CACHE_OFF +#define CONFIG_SYS_L2_PL310 1 +#define CONFIG_SYS_PL310_BASE 0x48242000 +#endif +#define CONFIG_SYS_CACHELINE_SIZE 32 /* Get CPU defs */ #include <asm/arch/cpu.h> #include <asm/arch/omap.h> -/* Display CPU and Board Info */ -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -#define CONFIG_MISC_INIT_R - -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 +/* Use General purpose timer 1 */ +#define CONFIG_SYS_TIMERBASE GPT2_BASE /* - * Size of malloc() pool * Total Size Environment - 128k - * Malloc - add 256k */ #define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) -/* Vector Base */ -#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE /* - * Hardware drivers + * For the DDR timing information we can either dynamically determine + * the timings to use or use pre-determined timings (based on using the + * dynamic method. Default to the static timing infomation. */ +#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +#endif + +#include <configs/ti_armv7_common.h> /* - * serial port - NS16550 compatible + * Hardware drivers */ -#define V_NS16550_CLK 48000000 - #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_SYS_NS16550_CLK 48000000 #define CONFIG_CONS_INDEX 3 #define CONFIG_SYS_NS16550_COM3 UART3_BASE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - -/* CPU */ -#define CONFIG_ARCH_CPU_INIT - -/* I2C */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 -#define CONFIG_I2C_MULTI_BUS 1 - /* TWL6030 */ #ifndef CONFIG_SPL_BUILD #define CONFIG_TWL6030_POWER 1 #endif -/* MMC */ -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 - - /* USB */ #define CONFIG_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1 @@ -100,36 +79,13 @@ #define CONFIG_USB_TTY 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -/* Flash */ -#define CONFIG_SYS_NO_FLASH 1 - -/* commands to include */ -#include <config_cmd_default.h> - -/* Enabled commands */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ - -/* Disabled commands */ +/* Per-Soc commands */ #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMLS /* List all found images */ /* * Environment setup */ - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 - -#define CONFIG_ENV_OVERWRITE - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyO2,115200n8\0" \ @@ -192,100 +148,10 @@ "fi; " \ "fi" -#define CONFIG_AUTO_COMPLETE 1 - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 512 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -/* - * memtest setup - */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x80000000 - -/* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/* - * SDRAM Memory Map - * Even though we use two CS all the memory - * is mapped to one contiguous block - */ -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) - -#ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_L2_PL310 1 -#define CONFIG_SYS_PL310_BASE 0x48242000 -#endif -#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* Defines for SDRAM init */ -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -#endif - /* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40304350 #define CONFIG_SPL_MAX_SIZE (38 * 1024) -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SPL_DISPLAY_PRINT - -/* - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 80E7FFC0--0x80E80000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80E80000 - -/* - * BSS and malloc area 64MB into memory to allow enough - * space for the kernel at the beginning of memory - */ -#define CONFIG_SPL_BSS_START_ADDR 0x84000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" -#define CONFIG_SYS_THUMB_BUILD - #endif /* __CONFIG_OMAP4_COMMON_H */ diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index 8294622..6820e42 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -48,8 +48,6 @@ /* ENV related config options */ #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_PROMPT "Panda # " - #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #endif /* __CONFIG_PANDA_H */ diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index acced46..b352511 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -32,6 +32,4 @@ #define CONFIG_ENV_OFFSET 0xE0000 #define CONFIG_CMD_SAVEENV -#define CONFIG_SYS_PROMPT "OMAP4430 SDP # " - #endif /* __CONFIG_SDP4430_H */ diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h index 827eaab..c7fa37e 100644 --- a/include/configs/omap5_common.h +++ b/include/configs/omap5_common.h @@ -70,10 +70,11 @@ #endif #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=" CONSOLEDEV ",115200n8\0" \ + "loadaddr=0x80200000\0" \ + "fdtaddr=0x80F80000\0" \ "fdt_high=0xffffffff\0" \ - "fdtaddr=0x80f80000\0" \ + "rdaddr=0x81000000\0" \ + "console=" CONSOLEDEV ",115200n8\0" \ "fdtfile=undefined\0" \ "bootpart=0:2\0" \ "bootdir=/boot\0" \ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index 543209c..d5eba58 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -207,6 +207,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h deleted file mode 100644 index d3e9017..0000000 --- a/include/configs/pdnb3.h +++ /dev/null @@ -1,322 +0,0 @@ -/* - * (C) Copyright 2006-2007 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * Configuation settings for the PDNB3 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_IXP425 1 /* This is an IXP425 CPU */ -#define CONFIG_PDNB3 1 /* on an PDNB3 board */ - -#define CONFIG_MACH_TYPE 1002 - -#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */ -#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */ - -/* - * Ethernet - */ -#define CONFIG_IXP4XX_NPE 1 /* include IXP4xx NPE support */ -#define CONFIG_PHY_ADDR 16 /* NPE0 PHY address */ -#define CONFIG_HAS_ETH1 -#define CONFIG_PHY1_ADDR 18 /* NPE1 PHY address */ -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_SYS_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ - -/* - * Misc configuration options - */ -#define CONFIG_BOOTCOUNT_LIMIT /* support for bootcount limit */ -#define CONFIG_SYS_BOOTCOUNT_ADDR 0x60003000 /* inside qmrg sram */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_IXP_SERIAL -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NET -#define CONFIG_CMD_MII -#define CONFIG_CMD_I2C -#define CONFIG_CMD_ELF -#define CONFIG_CMD_PING - -#if !defined(CONFIG_SCPU) -#define CONFIG_CMD_NAND -#endif - - -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ -#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */ - -#define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/*************************************************************** - * Platform/Board specific defines start here. - ***************************************************************/ - -/*----------------------------------------------------------------------- - * Default configuration (environment varibles...) - *----------------------------------------------------------------------*/ -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "hostname=pdnb3\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate} " \ - "mtdparts=${mtdparts}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ - "rootpath=/opt/buildroot\0" \ - "bootfile=/tftpboot/netbox/uImage\0" \ - "kernel_addr=50080000\0" \ - "ramdisk_addr=50200000\0" \ - "load=tftp 100000 /tftpboot/netbox/u-boot.bin\0" \ - "update=protect off 50000000 5007dfff;era 50000000 5007dfff;" \ - "cp.b 100000 50000000 ${filesize};" \ - "setenv filesize;saveenv\0" \ - "upd=run load update\0" \ - "ipaddr=10.0.0.233\0" \ - "serverip=10.0.0.152\0" \ - "netmask=255.255.0.0\0" \ - "ethaddr=c6:6f:13:36:f3:81\0" \ - "eth1addr=c6:6f:13:36:f3:82\0" \ - "mtdparts=IXP4XX-Flash.0:504k@0(uboot),4k@504k(env)," \ - "4k@508k(renv)\0" \ - "" -#define CONFIG_BOOTCOMMAND "run net_nfs" - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_TEXT_BASE 0x50000000 -#define CONFIG_SYS_FLASH_BASE 0x50000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#if defined(CONFIG_SCPU) -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 512 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (504 << 10) /* Reserve 512 kB for Monitor */ -#endif - -/* - * Expansion bus settings - */ -#if defined(CONFIG_SCPU) -#define CONFIG_SYS_EXP_CS0 0x94d23C42 /* 8bit, max size */ -#else -#define CONFIG_SYS_EXP_CS0 0x94913C43 /* 8bit, max size */ -#endif -#define CONFIG_SYS_EXP_CS1 0x85000043 /* 8bit, 512bytes */ - -/* - * SDRAM settings - */ -#define CONFIG_SYS_SDR_CONFIG 0x18 -#define CONFIG_SYS_SDR_MODE_CONFIG 0x1 -#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a - -/* - * FLASH and environment organization - */ -#if defined(CONFIG_SCPU) -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */ -#endif - -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size (width) */ -#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ -#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ -/* - * The following defines are added for buggy IOP480 byte interface. - * All other boards should use the standard values (CPCI405 etc.) - */ -#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ -#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ -#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#define CONFIG_ENV_IS_IN_FLASH 1 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -#if defined(CONFIG_SCPU) -/* no redundant environment on SCPU */ -#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ -#else -#define CONFIG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */ -#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif - -#if !defined(CONFIG_SCPU) -/* - * NAND-FLASH stuff - */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x51000000 /* NAND FLASH Base Address */ -#endif - -/* - * GPIO settings - */ - -/* FPGA program pin configuration */ -#define CONFIG_SYS_GPIO_PRG 12 /* FPGA program pin (cpu output)*/ -#define CONFIG_SYS_GPIO_CLK 10 /* FPGA clk pin (cpu output) */ -#define CONFIG_SYS_GPIO_DATA 14 /* FPGA data pin (cpu output) */ -#define CONFIG_SYS_GPIO_INIT 13 /* FPGA init pin (cpu input) */ -#define CONFIG_SYS_GPIO_DONE 11 /* FPGA done pin (cpu input) */ - -/* other GPIO's */ -#define CONFIG_SYS_GPIO_RESTORE_INT 0 -#define CONFIG_SYS_GPIO_RESTART_INT 1 -#define CONFIG_SYS_GPIO_SYS_RUNNING 2 -#define CONFIG_SYS_GPIO_PCI_INTA 3 -#define CONFIG_SYS_GPIO_PCI_INTB 4 -#define CONFIG_SYS_GPIO_I2C_SCL 6 -#define CONFIG_SYS_GPIO_I2C_SDA 7 -#define CONFIG_SYS_GPIO_FPGA_RESET 9 -#define CONFIG_SYS_GPIO_CLK_33M 15 - -/* - * I2C stuff - */ - -/* enable I2C and select the hardware/software driver */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 83000 /* 83 kHz is supposed to work */ -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE -/* - * Software (bit-bang) I2C driver configuration - */ -#define PB_SCL (1 << CONFIG_SYS_GPIO_I2C_SCL) -#define PB_SDA (1 << CONFIG_SYS_GPIO_I2C_SDA) - -#define I2C_INIT GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_I2C_SCL) -#define I2C_ACTIVE GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_I2C_SDA) -#define I2C_TRISTATE GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_I2C_SDA) -#define I2C_READ ((*IXP425_GPIO_GPINR & PB_SDA) != 0) -#define I2C_SDA(bit) if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SDA); \ - else GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SDA) -#define I2C_SCL(bit) if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SCL); \ - else GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SCL) -#define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */ - -/* - * I2C RTC - */ -#if 0 /* test-only */ -#define CONFIG_RTC_DS1340 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#else -/* M41T11 Serial Access Timekeeper(R) SRAM */ -#define CONFIG_RTC_M41T11 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with the linux driver */ -#endif - -/* - * Spartan3 FPGA configuration support - */ -#define CONFIG_SYS_FPGA_MAX_SIZE 700*1024 /* 700kByte for XC3S500E */ - -#define CONFIG_SYS_FPGA_PRG (1 << CONFIG_SYS_GPIO_PRG) /* FPGA program pin (cpu output)*/ -#define CONFIG_SYS_FPGA_CLK (1 << CONFIG_SYS_GPIO_CLK) /* FPGA clk pin (cpu output) */ -#define CONFIG_SYS_FPGA_DATA (1 << CONFIG_SYS_GPIO_DATA) /* FPGA data pin (cpu output) */ -#define CONFIG_SYS_FPGA_INIT (1 << CONFIG_SYS_GPIO_INIT) /* FPGA init pin (cpu input) */ -#define CONFIG_SYS_FPGA_DONE (1 << CONFIG_SYS_GPIO_DONE) /* FPGA done pin (cpu input) */ - -/* - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 67b40b2..792f4cd 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -245,6 +245,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW 1 #define CONFIG_DOS_PARTITION 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 2b4335e..ff379a5 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -272,6 +272,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW 1 #define CONFIG_DOS_PARTITION 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 7d16bd8..f15ae6d 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -120,6 +120,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_UPLL #define CONFIG_USB_OHCI_NEW 1 #define CONFIG_DOS_PARTITION 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 79c0068..924d7fa 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -153,6 +153,7 @@ #ifdef CONFIG_CMD_USB #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_UPLL #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index 4ba2242..3cf693b 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -119,6 +119,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 17eb5f2..c5de89e 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -65,6 +65,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h index a997331..95fc26b 100644 --- a/include/configs/stamp9g20.h +++ b/include/configs/stamp9g20.h @@ -165,6 +165,7 @@ /* USB configuration */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE #define CONFIG_DOS_PARTITION diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index d2e34ae..10fe47f 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -41,6 +41,17 @@ #define CONFIG_MII /* Required in net/eth.c */ /* + * RTC related defines. To use bootcount you must set bootlimit in the + * environment to a non-zero value. + */ +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 + +/* Enable the HW watchdog, since we can use this with bootcount */ +#define CONFIG_HW_WATCHDOG +#define CONFIG_OMAP_WATCHDOG + +/* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x402F0400 and 0x4030B800 as a download area and * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also @@ -50,6 +61,9 @@ #define CONFIG_SPL_TEXT_BASE 0x402F0400 #define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) +/* Enable the watchdog inside of SPL */ +#define CONFIG_SPL_WATCHDOG_SUPPORT + /* * Since SPL did pll and ddr initialization for us, * we don't need to do it twice. diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index e89e874..13ed875 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -202,7 +202,7 @@ #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100) +#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000 /* FAT */ #define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage" diff --git a/include/configs/top9000.h b/include/configs/top9000.h index a6d6928..159a8bc 100644 --- a/include/configs/top9000.h +++ b/include/configs/top9000.h @@ -174,6 +174,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index b102739..ac9a1dd 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -39,6 +39,9 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SILENT_CONSOLE +#define CONFIG_ZERO_BOOTDELAY_CHECK + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) @@ -53,12 +56,27 @@ #define CONFIG_OF_LIBFDT /* Size of malloc() pool */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ - /* Sector */ #define CONFIG_SYS_MALLOC_LEN (1024*1024) /* Hardware drivers */ +/* GPIO support */ +#define CONFIG_OMAP_GPIO + +/* LED support */ +#define CONFIG_STATUS_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define CONFIG_CMD_LED /* LED command */ +#define STATUS_LED_BIT (1 << 0) +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT1 (1 << 1) +#define STATUS_LED_STATE1 STATUS_LED_ON +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT2 (1 << 2) +#define STATUS_LED_STATE2 STATUS_LED_ON +#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) + /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL @@ -84,6 +102,13 @@ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_I2C_MULTI_BUS + +/* EEPROM */ +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_BUS_NUM 1 /* TWL4030 */ #define CONFIG_TWL4030_POWER @@ -92,13 +117,16 @@ /* Board NAND Info */ #define CONFIG_SYS_NO_FLASH /* no NOR flash */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nand0=nand" -#define MTDPARTS_DEFAULT "mtdparts=nand:" \ - "512k(u-boot-spl)," \ - "1920k(u-boot)," \ - "128k(u-boot-env)," \ - "4m(kernel)," \ - "-(fs)" +#define MTDIDS_DEFAULT "nand0=omap2-nand.0" +#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \ + "128k(SPL)," \ + "1m(u-boot)," \ + "384k(u-boot-env1)," \ + "1152k(mtdoops)," \ + "384k(u-boot-env2)," \ + "5m(kernel)," \ + "2m(fdt)," \ + "-(ubi)" #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ @@ -138,53 +166,104 @@ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS -/* Environment information */ -#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ +/* Environment information (this is the common part) */ -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 0 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ +/* hang() the board on panic() */ +#define CONFIG_PANIC_HANG + +/* environment placement (for NAND), is different for FLASHCARD but does not + * harm there */ +#define CONFIG_ENV_OFFSET 0x120000 /* env start */ +#define CONFIG_ENV_OFFSET_REDUND 0x2A0000 /* redundant env start */ +#define CONFIG_ENV_SIZE (16 << 10) /* use 16KiB for env */ +#define CONFIG_ENV_RANGE (384 << 10) /* allow badblocks in env */ + +/* the loadaddr is the same as CONFIG_SYS_LOAD_ADDR, unfortunately the defiend + * value can not be used here! */ +#define CONFIG_LOADADDR 0x82000000 + +#define CONFIG_COMMON_ENV_SETTINGS \ "console=ttyO2,115200n8\0" \ "mmcdev=0\0" \ - "vram=12M\0" \ - "lcdmode=800x600\0" \ + "vram=3M\0" \ "defaultdisplay=lcd\0" \ - "kernelopts=rw rootwait\0" \ + "kernelopts=mtdoops.mtddev=3\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ "commonargs=" \ "setenv bootargs console=${console} " \ + "${mtdparts} " \ + "${kernelopts} " \ + "vt.global_cursor_default=0 " \ "vram=${vram} " \ - "omapfb.mode=lcd:${lcdmode} " \ - "omapdss.def_disp=${defaultdisplay}\0" \ + "omapdss.def_disp=${defaultdisplay}\0" + +#define CONFIG_BOOTCOMMAND "run autoboot" + +/* specific environment settings for different use cases + * FLASHCARD: used to run a rdimage from sdcard to program the device + * 'NORMAL': used to boot kernel from sdcard, nand, ... + * + * The main aim for the FLASHCARD skin is to have an embedded environment + * which will not be influenced by any data already on the device. + */ +#ifdef CONFIG_FLASHCARD + +#define CONFIG_ENV_IS_NOWHERE + +/* the rdaddr is 16 MiB before the loadaddr */ +#define CONFIG_ENV_RDADDR "rdaddr=0x81000000\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_COMMON_ENV_SETTINGS \ + CONFIG_ENV_RDADDR \ + "autoboot=" \ + "run commonargs; " \ + "setenv bootargs ${bootargs} " \ + "flashy_updateimg=/dev/mmcblk0p1:corscience_update.img " \ + "rdinit=/sbin/init; " \ + "mmc dev ${mmcdev}; mmc rescan; " \ + "fatload mmc ${mmcdev} ${loadaddr} uImage; " \ + "fatload mmc ${mmcdev} ${rdaddr} uRamdisk; " \ + "bootm ${loadaddr} ${rdaddr}\0" + +#else /* CONFIG_FLASHCARD */ + +#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ + +#define CONFIG_ENV_IS_IN_NAND + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_COMMON_ENV_SETTINGS \ "mmcargs=" \ "run commonargs; " \ "setenv bootargs ${bootargs} " \ "root=/dev/mmcblk0p2 " \ - "${kernelopts}\0" \ + "rootwait " \ + "rw\0" \ "nandargs=" \ "run commonargs; " \ "setenv bootargs ${bootargs} " \ - "omapfb.mode=lcd:${lcdmode} " \ - "omapdss.def_disp=${defaultdisplay} " \ "root=ubi0:root " \ - "ubi.mtd=4 " \ + "ubi.mtd=7 " \ "rootfstype=ubifs " \ - "${kernelopts}\0" \ + "ro\0" \ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source ${loadaddr}\0" \ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ - "loaduimage_ubi=mtd default; " \ - "ubi part fs; " \ + "loaduimage_ubi=ubi part ubi; " \ "ubifsmount ubi:root; " \ "ubifsload ${loadaddr} /boot/uImage\0" \ + "loaduimage_nand=nand read ${loadaddr} kernel 0x500000\0" \ "nandboot=echo Booting from nand ...; " \ "run nandargs; " \ - "run loaduimage_ubi; " \ + "run loaduimage_nand; " \ "bootm ${loadaddr}\0" \ "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ @@ -197,12 +276,12 @@ "fi; " \ "else run nandboot; fi\0" - -#define CONFIG_BOOTCOMMAND "run autoboot" +#endif /* CONFIG_FLASHCARD */ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_CMDLINE_EDITING /* enable cmdline history */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_PROMPT "OMAP3 Tricorder # " #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ @@ -214,9 +293,9 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000) +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x00000000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - 0x01000000) /* 16MB */ + 0x07000000) /* 112 MB */ #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) @@ -239,9 +318,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ - #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 @@ -259,6 +335,7 @@ #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_I2C_SUPPORT @@ -277,7 +354,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ -#define CONFIG_SPL_MAX_SIZE (55 * 1024) /* 7 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (57 * 1024) /* 7 KB for stack */ #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ @@ -301,10 +378,12 @@ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x100000 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_SCRATCH 0x81000000 #endif /* __CONFIG_H */ diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h index e171ae4..f5d8564 100644 --- a/include/configs/vl_ma2sc.h +++ b/include/configs/vl_ma2sc.h @@ -116,6 +116,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT |