diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/zynq-common.h | 77 |
1 files changed, 77 insertions, 0 deletions
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index d6dc745..c7eee0a 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -228,4 +228,81 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_TFTPPUT +/* SPL part */ +#define CONFIG_SPL +#define CONFIG_CMD_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/zynq/u-boot-spl.lds" + +/* Disable dcache for SPL just for sure */ +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_DCACHE_OFF +#undef CONFIG_FPGA +#endif + +/* MMC support */ +#ifdef CONFIG_ZYNQ_SDHCI0 +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#endif + +/* Address in RAM where the parameters must be copied by SPL. */ +#define CONFIG_SYS_SPL_ARGS_ADDR 0x10000000 + +#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "system.dtb" +#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage" + +/* Not using MMC raw mode - just for compilation purpose */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 + +/* qspi mode is working fine */ +#ifdef CONFIG_ZYNQ_QSPI +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000 +#define CONFIG_SPL_SPI_CS 0 +#endif + +/* for booting directly linux */ +#define CONFIG_SPL_OS_BOOT + +/* SP location before relocation, must use scratch RAM */ +#define CONFIG_SPL_TEXT_BASE 0x0 + +/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */ +#define CONFIG_SPL_MAX_SIZE 0x30000 + +/* The highest 64k OCM address */ +#define OCM_HIGH_ADDR 0xffff0000 + +/* Just define any reasonable size */ +#define CONFIG_SPL_STACK_SIZE 0x1000 + +/* SPL stack position - and stack goes down */ +#define CONFIG_SPL_STACK (OCM_HIGH_ADDR + CONFIG_SPL_STACK_SIZE) + +/* On the top of OCM space */ +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_STACK + \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x1000 + +/* BSS setup */ +#define CONFIG_SPL_BSS_START_ADDR 0x100000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 + +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE + #endif /* __CONFIG_ZYNQ_COMMON_H */ |