diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/xm250.h | 369 |
1 files changed, 0 insertions, 369 deletions
diff --git a/include/configs/xm250.h b/include/configs/xm250.h deleted file mode 100644 index a35bce3..0000000 --- a/include/configs/xm250.h +++ /dev/null @@ -1,369 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_XM250 1 /* on a MicroSys XM250 Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define CONFIG_SYS_TEXT_BASE 0x0 - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Size of malloc() pool; this lives below the uppermost 128 KiB which are - * used for the RAM copy of the uboot code - * - */ -#define CONFIG_SYS_MALLOC_LEN (256*1024) - -/* - * Hardware drivers - */ -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x04000300 -#undef CONFIG_SMC91111_EXT_PHY -#define CONFIG_SMC_USE_32_BIT -#undef CONFIG_SHOW_ACTIVITY -#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ - -/* - * I2C bus - */ -#define CONFIG_I2C_MV 1 -#define CONFIG_MV_I2C_REG 0x40301680 -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0xfe - -#define CONFIG_RTC_PCF8563 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58 /* A0 = 0 (hardwired) */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 4 bits = 16 octets */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* length of address */ -#define CONFIG_SYS_EEPROM_SIZE 2048 /* size in bytes */ -#undef CONFIG_SYS_I2C_INIT_BOARD /* board has no own init */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ELF -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C - - -#define CONFIG_BOOTDELAY 3 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/400/100 MHz */ - - /* valid baudrates */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * Definitions related to passing arguments to kernel. - */ -#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ -#define CONFIG_INITRD_TAG 1 /* do not send initrd params */ - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 4 -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ -#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Set Lock Bit */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Clear Lock Bits */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_ENV_SECT_SIZE 0x40000 /* Size of the Environment Sector */ -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128 KiB */ - -/****************************************************************************** - * - * CPU specific defines - * - ******************************************************************************/ - -/* - * GPIO settings - * - * GPIO pin assignments - * GPIO Name Dir Out AF - * 0 NC - * 1 NC - * 2 SIRQ1 I - * 3 SIRQ2 I - * 4 SIRQ3 I - * 5 DMAACK1 O 0 - * 6 DMAACK2 O 0 - * 7 DMAACK3 O 0 - * 8 TC1 O 0 - * 9 TC2 O 0 - * 10 TC3 O 0 - * 11 nDMAEN O 1 - * 12 AENCTRL O 0 - * 13 PLDTC O 0 - * 14 ETHIRQ I - * 15 NC - * 16 NC - * 17 NC - * 18 RDY I - * 19 DMASIO I - * 20 ETHIRQ NC - * 21 NC - * 22 PGMEN O 1 FIXME for debug only enable flash - * 23 NC - * 24 NC - * 25 NC - * 26 NC - * 27 NC - * 28 NC - * 29 NC - * 30 NC - * 31 NC - * 32 NC - * 33 NC - * 34 FFRXD I 01 - * 35 FFCTS I 01 - * 36 FFDCD I 01 - * 37 FFDSR I 01 - * 38 FFRI I 01 - * 39 FFTXD O 1 10 - * 40 FFDTR O 0 10 - * 41 FFRTS O 0 10 - * 42 RS232FOFF O 0 00 - * 43 NC - * 44 NC - * 45 IRSL0 O 0 - * 46 IRRX0 I 01 - * 47 IRTX0 O 0 10 - * 48 NC - * 49 nIOWE O 0 - * 50 NC - * 51 NC - * 52 NC - * 53 NC - * 54 NC - * 55 NC - * 56 NC - * 57 NC - * 58 DKDIRQ I - * 59 NC - * 60 NC - * 61 NC - * 62 NC - * 63 NC - * 64 COMLED O 0 - * 65 COMLED O 0 - * 66 COMLED O 0 - * 67 COMLED O 0 - * 68 COMLED O 0 - * 69 COMLED O 0 - * 70 COMLED O 0 - * 71 COMLED O 0 - * 72 NC - * 73 NC - * 74 NC - * 75 NC - * 76 NC - * 77 NC - * 78 CSIO O 1 - * 79 NC - * 80 CSETH O 1 - * - * NOTE: All NC's are defined to be outputs - * - */ -/* Pin direction control */ -#define CONFIG_SYS_GPDR0_VAL 0xd3808000 -#define CONFIG_SYS_GPDR1_VAL 0xfcffab83 -#define CONFIG_SYS_GPDR2_VAL 0x0001ffff -/* Set and Clear registers */ -#define CONFIG_SYS_GPSR0_VAL 0x00008000 -#define CONFIG_SYS_GPSR1_VAL 0x00ff0002 -#define CONFIG_SYS_GPSR2_VAL 0x0001c000 -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -/* Edge detect registers (these are set by the kernel) */ -#define CONFIG_SYS_GRER0_VAL 0x00002180 -#define CONFIG_SYS_GRER1_VAL 0x00000000 -#define CONFIG_SYS_GRER2_VAL 0x00000000 -#define CONFIG_SYS_GFER0_VAL 0x000043e0 -#define CONFIG_SYS_GFER1_VAL 0x00000000 -#define CONFIG_SYS_GFER2_VAL 0x00000000 -/* Alternate function registers */ -#define CONFIG_SYS_GAFR0_L_VAL 0x80000004 -#define CONFIG_SYS_GAFR0_U_VAL 0x595a8010 -#define CONFIG_SYS_GAFR1_L_VAL 0x699a9559 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5aaaa -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - -/* - * Clocks, power control and interrupts - */ -#define CONFIG_SYS_PSSR_VAL 0x00000030 -#define CONFIG_SYS_CCCR 0x00000161 /* 100 MHz memory, 400 MHz CPU, 400 Turbo */ -#define CONFIG_SYS_CKEN 0x000141ec /* FFUART and STUART enabled */ -#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ - -/* FIXME - * - * RTC settings - * Watchdog - * - */ - -/* - * Memory settings - * - */ -#define CONFIG_SYS_MSC0_VAL 0x122423f0 /* FLASH / LAN (cs0)/(cS1) */ -#define CONFIG_SYS_MSC1_VAL 0x35f4aa4c /* USB / ST3+ST5 (cs2)/(cS3) */ -#define CONFIG_SYS_MSC2_VAL 0x35f435fc /* IDE / BCR + WatchDog (cs4)/(cS5) */ -#define CONFIG_SYS_MDCNFG_VAL 0x000009c9 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_MDREFR_VAL 0x000da018 /* Initial setting, individual bits set in lowlevel_init.S */ -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init) - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00004715 -#define CONFIG_SYS_MCIO1_VAL 0x00004715 - -/* Board specific defines */ - -#ifndef __ASSEMBLY__ - -/* global prototypes */ -void led_code(int code, int color); - -#endif - -#endif /* __CONFIG_H */ |