diff options
Diffstat (limited to 'include')
40 files changed, 625 insertions, 64 deletions
diff --git a/include/common.h b/include/common.h index d0bf1e8..4ad17ea 100644 --- a/include/common.h +++ b/include/common.h @@ -300,7 +300,7 @@ int abortboot(int bootdelay); extern char console_buffer[]; /* arch/$(ARCH)/lib/board.c */ -void board_init_f (ulong) __attribute__ ((noreturn)); +void board_init_f(ulong); void board_init_r (gd_t *, ulong) __attribute__ ((noreturn)); int checkboard (void); int checkflash (void); @@ -311,6 +311,15 @@ int mac_read_from_eeprom(void); extern u8 _binary_dt_dtb_start[]; /* embedded device tree blob */ int set_cpu_clk_info(void); +/** + * Show the DRAM size in a board-specific way + * + * This is used by boards to display DRAM information in their own way. + * + * @param size Size of DRAM (which should be displayed along with other info) + */ +void board_show_dram(ulong size); + /* common/flash.c */ void flash_perror (int); diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index e82f642..2a82e19 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -56,6 +56,7 @@ #define CONFIG_CMD_LICENSE /* console license display */ #define CONFIG_CMD_LOADB /* loadb */ #define CONFIG_CMD_LOADS /* loads */ +#define CONFIG_CMD_MEMINFO /* meminfo */ #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ #define CONFIG_CMD_MFSL /* FSL support for Microblaze */ #define CONFIG_CMD_MII /* MII support */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index ab9549b..72459d8 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -240,6 +240,38 @@ #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_NAND_AM33XX_BCH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, \ + 18, 19, 20, 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, 31, 32, 33, \ + 34, 35, 36, 37, 38, 39, 40, 41, \ + 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, } + +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 14 + +#define CONFIG_SYS_NAND_ECCSTEPS 4 +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) + +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 + /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM * 64 bytes before this address should be set aside for u-boot.img's @@ -299,6 +331,24 @@ #define CONFIG_NET_MULTI #define CONFIG_PHY_GIGE #define CONFIG_PHYLIB +#define CONFIG_PHY_ADDR 0 #define CONFIG_PHY_SMSC +#define CONFIG_NAND +/* NAND support */ +#ifdef CONFIG_NAND +#define CONFIG_CMD_NAND +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ + /* to access nand at */ + /* CS0 */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND + devices */ +#undef CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#endif + #endif /* ! __CONFIG_AM335X_EVM_H */ diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 1317582..6fac5ac 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -90,6 +90,14 @@ #define CONFIG_CMD_NAND #define CONFIG_CMD_SF #define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_USB + +/* + * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0) + * NB: in this case, USB 1.1 devices won't be recognized. + */ + /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 @@ -142,9 +150,12 @@ /* MMC */ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC -#define CONFIG_CMD_FAT #define CONFIG_GENERIC_MMC #define CONFIG_GENERIC_ATMEL_MCI +#endif + +/* FAT */ +#ifdef CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION #endif @@ -154,6 +165,22 @@ #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_MACB_SEARCH_PHY +/* USB */ +#ifdef CONFIG_CMD_USB +#ifdef CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_ATMEL +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 +#else +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9x5" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 +#endif +#define CONFIG_USB_ATMEL +#define CONFIG_USB_STORAGE +#endif + #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE @@ -178,6 +205,16 @@ #define CONFIG_BOOTCOMMAND "sf probe 0; " \ "sf read 0x22000000 0x100000 0x300000; " \ "bootm 0x22000000" +#elif defined(CONFIG_SYS_USE_DATAFLASH) +/* bootstrap + u-boot + env + linux in data flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x4200 +#define CONFIG_ENV_SIZE 0x4200 +#define CONFIG_ENV_SECT_SIZE 0x210 +#define CONFIG_ENV_SPI_MAX_HZ 30000000 +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ + "sf read 0x22000000 0x84000 0x294000; " \ + "bootm 0x22000000" #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 568ae8e..7d07215 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -114,9 +114,15 @@ #define CONFIG_DOS_PARTITION /* USB */ -#define CONFIG_MUSB_UDC #define CONFIG_USB_OMAP3 +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_OMAP +#define CONFIG_USB_ULPI +#define CONFIG_USB_ULPI_VIEWPORT_OMAP +#define CONFIG_USB_STORAGE +#define CONFIG_MUSB_UDC #define CONFIG_TWL4030_USB +#define CONFIG_CMD_USB /* USB device configuration */ #define CONFIG_USB_DEVICE @@ -188,6 +194,7 @@ /* Environment information */ #define CONFIG_BOOTDELAY 10 +#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ @@ -282,7 +289,6 @@ */ #define CONFIG_NR_DRAM_BANKS 1 /* CS1 is never populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ /*----------------------------------------------------------------------- * FLASH and environment organization diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index adeace0..d8aabd4 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -159,6 +159,7 @@ #define CONFIG_CMD_GPIO #define CONFIG_CMD_IMI #undef CONFIG_CMD_IMLS +#define CONFIG_CMD_IO #define CONFIG_CMD_IRQ #define CONFIG_CMD_ITEST #define CONFIG_CMD_LOADB diff --git a/include/configs/dig297.h b/include/configs/dig297.h index dda7582..721b91c 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -263,7 +263,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /*----------------------------------------------------------------------- diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 5a0d321..459f568 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -168,14 +168,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0 #define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0 -/* If M5282 port is fully implemented the monitor base will be behind - * the vector table. */ -#if (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) -#else -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ -#endif - #define CONFIG_SYS_MONITOR_LEN 0x20000 #define CONFIG_SYS_MALLOC_LEN (256 << 10) #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 diff --git a/include/configs/h2200.h b/include/configs/h2200.h index ef14dd3..516a26e 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -154,4 +154,29 @@ #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8" +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_USB_DEV_PULLUP_GPIO 33 +/* USB VBUS GPIO 3 */ + +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING + +#define CONFIG_BOOTDELAY 2 +#define CONFIG_BOOTCOMMAND \ + "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \ + "if bootp ; then setenv downloaded 1 ; fi ; done ; " \ + "source :script ; " \ + "bootm ; " + +#define CONFIG_USB_GADGET_PXA2XX +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_SUBSET + +#define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01" +#define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + #endif /* __CONFIG_H */ diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index be7937d..f8131b1 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -67,6 +67,9 @@ #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +/* define to avoid U-Boot to hang while waiting for TEMT */ +#define CONFIG_SYS_NS16550_BROKEN_TEMT + /* select serial console configuration */ #define CONFIG_CONS_INDEX 3 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 @@ -236,7 +239,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* @@ -313,6 +315,7 @@ #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_I2C_SUPPORT diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 05480d4..f64748e 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -253,9 +253,6 @@ "load=tftpboot ${load_addr_r} ${u-boot}\0" \ "mtdids=" MTDIDS_DEFAULT "\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "stderr=serial\0" \ - "stdin=serial\0" \ - "stdout=serial\0" \ "" #endif /* CONFIG_KM_DEF_ENV */ diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 8097f28..59f151a 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -146,7 +146,7 @@ "config_nc_dhcp=setenv autoload_old ${autoload}; " \ "setenv autoload no " \ "&& bootp " \ - "&& setenv ncip ${serverip} " \ + "&& setenv ncip " \ "&& setenv autoload ${autoload_old}; " \ "setenv autoload_old\0" \ "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 3f37e84..6887171 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -178,6 +178,8 @@ "512k(environment)," \ "512k(redundant-environment)," \ "4m(kernel)," \ + "128k(fdt)," \ + "8m(ramdisk)," \ "-(filesystem)" #else #define CONFIG_ENV_IS_NOWHERE diff --git a/include/configs/mcx.h b/include/configs/mcx.h index e304c99..185faa7 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -322,7 +322,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 7086d1d..405a842 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -92,7 +92,7 @@ /* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1MiB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024 * 4) /* 4MiB for malloc() */ /* * Other required minimal configurations diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 88b2bd6..0db92a7 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -95,6 +95,7 @@ #include <config_cmd_default.h> +#define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index fa0db38..cb3d938 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -34,10 +34,6 @@ #define CONFIG_SYS_TEXT_BASE 0x97800000 #include <asm/arch/imx-regs.h> -/* - * Disabled for now due to build problems under Debian and a significant - * increase in the final file size: 144260 vs. 109536 Bytes. - */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index e30502b..996396b 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -39,6 +39,7 @@ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT #define CONFIG_MXC_GPIO #define CONFIG_REVISION_TAG @@ -112,7 +113,7 @@ #define CONFIG_ETHPRIME "FEC0" -#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ +#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */ #define CONFIG_SYS_TEXT_BASE 0x77800000 #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -120,11 +121,8 @@ "uimage=uImage\0" \ "mmcdev=0\0" \ "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ + "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ + "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot} " \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h index 0f226f7..bd2fb10 100644 --- a/include/configs/mx6qsabre_common.h +++ b/include/configs/mx6qsabre_common.h @@ -41,7 +41,6 @@ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_MMC #define CONFIG_CMD_MMC @@ -78,7 +77,7 @@ #define CONFIG_BOOTDELAY 1 -#define CONFIG_LOADADDR 0x10800000 +#define CONFIG_LOADADDR 0x12000000 #define CONFIG_SYS_TEXT_BASE 0x17800000 #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -166,7 +165,6 @@ #if defined(CONFIG_ENV_IS_IN_MMC) #define CONFIG_ENV_OFFSET (6 * 64 * 1024) -#define CONFIG_SYS_MMC_ENV_DEV 0 #endif #define CONFIG_OF_LIBFDT diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index 760f3ce..f1ff201 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -20,4 +20,9 @@ #include "mx6qsabre_common.h" +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#if defined(CONFIG_ENV_IS_IN_MMC) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#endif + #endif /* __MX6QSABREAUTO_CONFIG_H */ diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 4ce4d4c..0f6bbb4 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -148,7 +148,7 @@ #define CONFIG_PREBOOT "" -#define CONFIG_LOADADDR 0x10800000 +#define CONFIG_LOADADDR 0x12000000 #define CONFIG_SYS_TEXT_BASE 0x17800000 #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6qsabresd.h index 771d129..a1d9285 100644 --- a/include/configs/mx6qsabresd.h +++ b/include/configs/mx6qsabresd.h @@ -25,4 +25,10 @@ #include "mx6qsabre_common.h" +#define CONFIG_SYS_FSL_USDHC_NUM 3 +#if defined(CONFIG_ENV_IS_IN_MMC) +#define CONFIG_SYS_MMC_ENV_DEV 2 /* eMMC/uSDHC4 */ +#define CONFIG_SYS_MMC_ENV_PART 1 /* Boot partition 1 */ +#endif + #endif /* __MX6QSABRESD_CONFIG_H */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 12d65f2..d0daa45 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -285,7 +285,7 @@ "else run userbutton_nonxm; fi;\0" \ "userbutton_xm=gpio input 4;\0" \ "userbutton_nonxm=gpio input 7;\0" -/* "run userbutton" will return 1 (false) if is pressed and 0 (false) if not */ +/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run userbutton; then " \ diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 67af314..09a0b2f 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -251,7 +251,6 @@ */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 #define CONFIG_ENV_IS_NOWHERE 1 diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 8a8a5d1..217f306 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -221,7 +221,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 #define CONFIG_SYS_TEXT_BASE 0x80008000 diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 2a890c9..b02ec85 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -303,7 +303,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /*--------------------------------------------------------------------------*/ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index e152055..ee4cbd7 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -252,7 +252,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /*----------------------------------------------------------------------- diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index d681424..a6b48a8 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -221,7 +221,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /*----------------------------------------------------------------------- diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h new file mode 100644 index 0000000..bf6bd4d --- /dev/null +++ b/include/configs/sh7752evb.h @@ -0,0 +1,153 @@ +/* + * Configuation settings for the sh7752evb board + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __SH7752EVB_H +#define __SH7752EVB_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4A 1 +#define CONFIG_SH_32BIT 1 +#define CONFIG_CPU_SH7752 1 +#define CONFIG_SH7752EVB 1 + +#define CONFIG_SYS_TEXT_BASE 0x5ff80000 +#define CONFIG_SYS_LDSCRIPT "board/renesas/sh7752evb/u-boot.lds" + +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_NFS +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SF +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_MD5SUM +#define CONFIG_MD5 +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp" + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE + +/* MEMORY */ +#define SH7752EVB_SDRAM_BASE (0x40000000) +#define SH7752EVB_SDRAM_SIZE (512 * 1024 * 1024) + +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE 512 +#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF2 1 +#undef CONFIG_SYS_CONSOLE_INFO_QUIET +#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE + +#define CONFIG_SYS_MEMTEST_START (SH7752EVB_SDRAM_BASE) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ + 480 * 1024 * 1024) +#undef CONFIG_SYS_ALT_MEMTEST +#undef CONFIG_SYS_MEMTEST_SCRATCH +#undef CONFIG_SYS_LOADS_BAUD_CHANGE + +#define CONFIG_SYS_SDRAM_BASE (SH7752EVB_SDRAM_BASE) +#define CONFIG_SYS_SDRAM_SIZE (SH7752EVB_SDRAM_SIZE) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \ + 128 * 1024 * 1024) + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CONFIG_SYS_NO_FLASH + +/* Ether */ +#define CONFIG_SH_ETHER 1 +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 18 +#define CONFIG_SH_ETHER_CACHE_WRITEBACK 1 +#define CONFIG_SH_ETHER_USE_GETHER 1 +#define CONFIG_PHYLIB +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RGMII +#define CONFIG_PHY_VITESSE + +#define SH7752EVB_ETHERNET_MAC_BASE_SPI 0x00090000 +#define SH7752EVB_SPI_SECTOR_SIZE (64 * 1024) +#define SH7752EVB_ETHERNET_MAC_BASE SH7752EVB_ETHERNET_MAC_BASE_SPI +#define SH7752EVB_ETHERNET_MAC_SIZE 17 +#define SH7752EVB_ETHERNET_NUM_CH 2 +#define CONFIG_BOARD_LATE_INIT + +/* SPI */ +#define CONFIG_SH_SPI 1 +#define CONFIG_SH_SPI_BASE 0xfe002000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO 1 +#define CONFIG_SPI_FLASH_MACRONIX 1 + +/* MMCIF */ +#define CONFIG_MMC 1 +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_SH_MMCIF 1 +#define CONFIG_SH_MMCIF_ADDR 0xffcb0000 +#define CONFIG_SH_MMCIF_CLK 48000000 + +/* ENV setting */ +#define CONFIG_ENV_IS_EMBEDDED +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_ADDR (0x00080000) +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR) +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netboot=bootp; bootm\0" + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 48000000 +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 +#endif /* __SH7752EVB_H */ diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h index 42077bd..5633d2a 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5.h @@ -65,7 +65,7 @@ #define CONFIG_SYS_BOOTMAPSZ ((256*1024*1024) - (4*1024)) #define CONFIG_SPL_RAM_DEVICE -#define CONFIG_SPL_STACK (&__stack_start) +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SYS_SPL_MALLOC_START ((unsigned long) (&__malloc_start)) #define CONFIG_SYS_SPL_MALLOC_SIZE (&__malloc_end - &__malloc_start) diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index ee73c27..9f1fb9f 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -189,7 +189,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* @@ -358,7 +357,6 @@ * I2C EEPROM */ #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) - /* * The I2C EEPROM on the TAM3517 contains * mac address and production data @@ -384,24 +382,29 @@ struct tam3517_module_info { unsigned char _rev[100]; }; -#define TAM3517_READ_MAC_FROM_EEPROM \ -do { \ - struct tam3517_module_info info;\ - char buf[80], ethname[20]; \ - int i; \ +#define TAM3517_READ_EEPROM(info, ret) \ +do { \ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \ if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \ - (void *)&info, sizeof(info))) \ - break; \ + (void *)info, sizeof(*info))) \ + ret = 1; \ + else \ + ret = 0; \ +} while (0) + +#define TAM3517_READ_MAC_FROM_EEPROM(info) \ +do { \ + char buf[80], ethname[20]; \ + int i; \ memset(buf, 0, sizeof(buf)); \ - for (i = 0 ; i < ARRAY_SIZE(info.eth_addr); i++) { \ + for (i = 0 ; i < ARRAY_SIZE((info)->eth_addr); i++) { \ sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", \ - info.eth_addr[i][5], \ - info.eth_addr[i][4], \ - info.eth_addr[i][3], \ - info.eth_addr[i][2], \ - info.eth_addr[i][1], \ - info.eth_addr[i][0]); \ + (info)->eth_addr[i][5], \ + (info)->eth_addr[i][4], \ + (info)->eth_addr[i][3], \ + (info)->eth_addr[i][2], \ + (info)->eth_addr[i][1], \ + (info)->eth_addr[i][0]); \ \ if (i) \ sprintf(ethname, "eth%daddr", i); \ @@ -411,6 +414,30 @@ do { \ setenv(ethname, buf); \ } \ } while (0) + +/* The following macros are taken from Technexion's documentation */ +#define TAM3517_sequence_number(info) \ + ((info)->sequence_number % 0x1000000000000LL) +#define TAM3517_week_of_year(info) (((info)->sequence_number >> 48) % 0x100) +#define TAM3517_year(info) ((info)->sequence_number >> 56) +#define TAM3517_revision_fixed(info) ((info)->revision % 0x100) +#define TAM3517_revision_major(info) (((info)->revision >> 8) % 0x100) +#define TAM3517_revision_tn(info) ((info)->revision >> 16) + +#define TAM3517_PRINT_SOM_INFO(info) \ +do { \ + printf("Vendor:%s\n", (info)->customer); \ + printf("SOM: %s\n", (info)->product); \ + printf("SeqNr: %02llu%02llu%012llu\n", \ + TAM3517_year(info), \ + TAM3517_week_of_year(info), \ + TAM3517_sequence_number(info)); \ + printf("Rev: TN%u %u.%u\n", \ + TAM3517_revision_tn(info), \ + TAM3517_revision_major(info), \ + TAM3517_revision_fixed(info)); \ +} while (0) + #endif #endif /* __TAM3517_H */ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index be0d2ec..bcb0350 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -247,7 +247,6 @@ /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* at least 128 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* NAND and environment organization */ diff --git a/include/configs/wireless_space.h b/include/configs/wireless_space.h new file mode 100644 index 0000000..eb20492 --- /dev/null +++ b/include/configs/wireless_space.h @@ -0,0 +1,194 @@ +/* + * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net> + * + * Based on the netspace_v2 code which is + * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _CONFIG_WIRELESS_SPACE_H +#define _CONFIG_WIRELESS_SPACE_H + +/* + * Machine number definition + */ +#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */ +#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE +#define CONFIG_IDENT_STRING " Wireless Space" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD /* SoC Family Name */ +/* SoC name */ +#define CONFIG_KW88F6281 +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_USB + +/* + * Core clock definition + */ +#define CONFIG_SYS_TCLK 166000000 /* 166MHz */ + +/* + * SDRAM configuration + */ +#define CONFIG_NR_DRAM_BANKS 1 + +/* + * Different SDRAM configuration and size for some of the boards derived + * from the Network Space v2 + */ + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* Remove or override few declarations from mv-common.h */ +#undef CONFIG_RBTREE +#undef CONFIG_SYS_IDE_MAXBUS +#undef CONFIG_SYS_IDE_MAXDEVICE +#define CONFIG_SYS_IDE_MAXBUS 1 +#define CONFIG_SYS_IDE_MAXDEVICE 1 +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "ws> " + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */ +#define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */ +#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */ +#define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */ +#define CONFIG_MII +#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#define CONFIG_NETCONSOLE +#define CONFIG_MV88E61XX_SWITCH +#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE +#define CONFIG_MV88E61XX_CMD +#define CONFIG_CMD_TFTPPUT +#endif /* CONFIG_CMD_NET */ + +/* + * SATA Driver configuration + */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#endif /* CONFIG_MVSATA_IDE */ + +/* + * Enable GPI0 support + */ +#define CONFIG_KIRKWOOD_GPIO + +/* + * Enable I2C support + */ +#ifdef CONFIG_CMD_I2C +/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */ +#endif /* CONFIG_CMD_I2C */ + +/* + * Partition support + */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION + +/* + * File systems support + */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT + +/* + * Use the HUSH parser + */ +#define CONFIG_SYS_HUSH_PARSER + +/* + * Console configuration + */ +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* + * Enable device tree support + */ +#define CONFIG_OF_LIBFDT + +/* + * Environment variables configurations + */ + +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ +#define CONFIG_ENV_SIZE 0x20000 /* 128KB */ +#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ + +/* + * Board-specific command to make using buttons etc easier + */ + +#define CONFIG_WIRELESS_SPACE_CMD + +/* + * Default environment variables + */ +#define CONFIG_PREBOOT + +#define CONFIG_BOOTARGS "console=ttyS0,115200" + +#define CONFIG_BOOTCOMMAND \ + "if run usbload || run diskload; then bootm; fi" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" \ + "bootfile=uImage\0" \ + "loadaddr=0x800000\0" \ + "autoload=no\0" \ + "netconsole=" \ + "set stdin $stdin,nc; " \ + "set stdout $stdout,nc; " \ + "set stderr $stderr,nc;\0" \ + "diskload=ide reset && " \ + "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \ + "usbload=usb start && " \ + "fatload usb 0:1 $loadaddr /boot/$bootfile\0" \ + "preboot=" \ + "dhcp && run netconsole\0" + +#endif /* _CONFIG_WIRELESS_SPACE_H */ diff --git a/include/env_callback.h b/include/env_callback.h index 47fdc6f..c583120 100644 --- a/include/env_callback.h +++ b/include/env_callback.h @@ -68,8 +68,16 @@ void env_callback_init(ENTRY *var_entry); * when associated through the ".callbacks" environment variable, the callback * will be executed any time the variable is inserted, overwritten, or deleted. */ +#ifdef CONFIG_SPL_BUILD +#define U_BOOT_ENV_CALLBACK(name, callback) \ + static inline void _u_boot_env_noop_##name(void) \ + { \ + (void)callback; \ + } +#else #define U_BOOT_ENV_CALLBACK(name, callback) \ ll_entry_declare(struct env_clbk_tbl, name, env_clbk, env_clbk) = \ {#name, callback} +#endif #endif /* __ENV_CALLBACK_H__ */ diff --git a/include/flash.h b/include/flash.h index 7db599e..c7acc97 100644 --- a/include/flash.h +++ b/include/flash.h @@ -44,6 +44,7 @@ typedef struct { ulong buffer_write_tout; /* maximum buffer write timeout */ ushort vendor; /* the primary vendor id */ ushort cmd_reset; /* vendor specific reset command */ + uchar cmd_erase_sector; /* vendor specific erase sect. command */ ushort interface; /* used for x8/x16 adjustments */ ushort legacy_unlock; /* support Intel legacy (un)locking */ ushort manufacturer_id; /* manufacturer id */ diff --git a/include/image.h b/include/image.h index b958b18..f5adc50 100644 --- a/include/image.h +++ b/include/image.h @@ -179,6 +179,9 @@ #define IH_MAGIC 0x27051956 /* Image Magic Number */ #define IH_NMLEN 32 /* Image Name Length */ +/* Reused from common.h */ +#define ROUND(a, b) (((a) + (b) - 1) & ~((b) - 1)) + /* * Legacy format image header, * all data in network byte order (aka natural aka bigendian). diff --git a/include/netdev.h b/include/netdev.h index b8d303d..7f158d4 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -163,10 +163,9 @@ static inline int pci_eth_init(bd_t *bis) * the stuct and enums here are used to specify switch configuration params */ #if defined(CONFIG_MV88E61XX_SWITCH) -enum mv88e61xx_cfg_vlan { - MV88E61XX_VLANCFG_DEFAULT, - MV88E61XX_VLANCFG_ROUTER -}; + +/* constants for any 88E61xx switch */ +#define MV88E61XX_MAX_PORTS_NUM 6 enum mv88e61xx_cfg_mdip { MV88E61XX_MDIP_NOCHANGE, @@ -192,7 +191,7 @@ enum mv88e61xx_cfg_prtstt { struct mv88e61xx_config { char *name; - enum mv88e61xx_cfg_vlan vlancfg; + u8 vlancfg[MV88E61XX_MAX_PORTS_NUM]; enum mv88e61xx_cfg_rgmiid rgmii_delay; enum mv88e61xx_cfg_prtstt portstate; enum mv88e61xx_cfg_ledinit led_init; @@ -201,6 +200,18 @@ struct mv88e61xx_config { u8 cpuport; }; +/* + * Common mappings for Internal VLANs + * These mappings consider that all ports are useable; the driver + * will mask inexistent/unused ports. + */ + +/* Switch mode : routes any port to any port */ +#define MV88E61XX_VLANCFG_SWITCH { 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F } + +/* Router mode: routes only CPU port 5 to/from non-CPU ports 0-4 */ +#define MV88E61XX_VLANCFG_ROUTER { 0x20, 0x20, 0x20, 0x20, 0x20, 0x1F } + int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig); #endif /* CONFIG_MV88E61XX_SWITCH */ diff --git a/include/twl4030.h b/include/twl4030.h index 0c17f59..5aa1841 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -580,6 +580,50 @@ #define TWL4030_USB_PHY_CLK_CTRL 0xFE #define TWL4030_USB_PHY_CLK_CTRL_STS 0xFF +/* GPIO */ +#define TWL4030_GPIO_GPIODATAIN1 0x00 +#define TWL4030_GPIO_GPIODATAIN2 0x01 +#define TWL4030_GPIO_GPIODATAIN3 0x02 +#define TWL4030_GPIO_GPIODATADIR1 0x03 +#define TWL4030_GPIO_GPIODATADIR2 0x04 +#define TWL4030_GPIO_GPIODATADIR3 0x05 +#define TWL4030_GPIO_GPIODATAOUT1 0x06 +#define TWL4030_GPIO_GPIODATAOUT2 0x07 +#define TWL4030_GPIO_GPIODATAOUT3 0x08 +#define TWL4030_GPIO_CLEARGPIODATAOUT1 0x09 +#define TWL4030_GPIO_CLEARGPIODATAOUT2 0x0A +#define TWL4030_GPIO_CLEARGPIODATAOUT3 0x0B +#define TWL4030_GPIO_SETGPIODATAOUT1 0x0C +#define TWL4030_GPIO_SETGPIODATAOUT2 0x0D +#define TWL4030_GPIO_SETGPIODATAOUT3 0x0E +#define TWL4030_GPIO_GPIO_DEBEN1 0x0F +#define TWL4030_GPIO_GPIO_DEBEN2 0x10 +#define TWL4030_GPIO_GPIO_DEBEN3 0x11 +#define TWL4030_GPIO_GPIO_CTRL 0x12 +#define TWL4030_GPIO_GPIOPUPDCTR1 0x13 +#define TWL4030_GPIO_GPIOPUPDCTR2 0x14 +#define TWL4030_GPIO_GPIOPUPDCTR3 0x15 +#define TWL4030_GPIO_GPIOPUPDCTR4 0x16 +#define TWL4030_GPIO_GPIOPUPDCTR5 0x17 +#define TWL4030_GPIO_GPIO_ISR1A 0x19 +#define TWL4030_GPIO_GPIO_ISR2A 0x1A +#define TWL4030_GPIO_GPIO_ISR3A 0x1B +#define TWL4030_GPIO_GPIO_IMR1A 0x1C +#define TWL4030_GPIO_GPIO_IMR2A 0x1D +#define TWL4030_GPIO_GPIO_IMR3A 0x1E +#define TWL4030_GPIO_GPIO_ISR1B 0x1F +#define TWL4030_GPIO_GPIO_ISR2B 0x20 +#define TWL4030_GPIO_GPIO_ISR3B 0x21 +#define TWL4030_GPIO_GPIO_IMR1B 0x22 +#define TWL4030_GPIO_GPIO_IMR2B 0x23 +#define TWL4030_GPIO_GPIO_IMR3B 0x24 +#define TWL4030_GPIO_GPIO_EDR1 0x28 +#define TWL4030_GPIO_GPIO_EDR2 0x29 +#define TWL4030_GPIO_GPIO_EDR3 0x2A +#define TWL4030_GPIO_GPIO_EDR4 0x2B +#define TWL4030_GPIO_GPIO_EDR5 0x2C +#define TWL4030_GPIO_GPIO_SIH_CTRL 0x2D + /* * Convience functions to read and write from TWL4030 * diff --git a/include/twl6035.h b/include/twl6035.h index e21ddba..ce74348 100644 --- a/include/twl6035.h +++ b/include/twl6035.h @@ -39,4 +39,4 @@ int twl6035_i2c_write_u8(u8 chip_no, u8 val, u8 reg); int twl6035_i2c_read_u8(u8 chip_no, u8 *val, u8 reg); void twl6035_init_settings(void); -void twl6035_mmc1_poweron_ldo(void); +int twl6035_mmc1_poweron_ldo(void); diff --git a/include/usb.h b/include/usb.h index 8d8a2c9..d79c865 100644 --- a/include/usb.h +++ b/include/usb.h @@ -392,5 +392,6 @@ int hub_port_reset(struct usb_device *dev, int port, struct usb_device *usb_alloc_new_device(void *controller); int usb_new_device(struct usb_device *dev); +void usb_free_device(void); #endif /*_USB_H_ */ |