summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/acadia.h62
-rw-r--r--include/configs/adsvix.h17
-rw-r--r--include/configs/aev.h49
-rw-r--r--include/configs/alpr.h45
-rw-r--r--include/configs/armadillo.h8
-rw-r--r--include/configs/assabet.h15
-rw-r--r--include/configs/at91rm9200dk.h28
-rw-r--r--include/configs/atc.h24
-rw-r--r--include/configs/atstk1002.h57
9 files changed, 160 insertions, 145 deletions
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index 517d130..3f5d025 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -123,10 +123,8 @@
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-#define _CFG_CMD_INCLUDE (CFG_CMD_ALL)
#else
#define CFG_NO_FLASH 1 /* No NOR on Acadia when NAND-booting */
-#define _CFG_CMD_INCLUDE ((CFG_CMD_ALL) & ~(CFG_CMD_FLASH | CFG_CMD_IMLS))
#endif
#ifdef CFG_ENV_IS_IN_FLASH
@@ -301,27 +299,39 @@
#define CONFIG_SUPPORT_VFAT
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & _CFG_CMD_INCLUDE) | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DTT | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NAND | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_USB)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_USB
+
+/*
+ * No NOR on Acadia when NAND-booting
+ */
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#endif
+
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -330,7 +340,7 @@
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -373,7 +383,7 @@
*/
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405EZ CPU */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/
#endif
@@ -489,7 +499,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/adsvix.h b/include/configs/adsvix.h
index c410891..0d64013 100644
--- a/include/configs/adsvix.h
+++ b/include/configs/adsvix.h
@@ -68,10 +68,19 @@
#define CONFIG_DOS_PARTITION 1
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_NET) | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_IDE | CFG_CMD_PCMCIA)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_PCMCIA
+
+#undef CONFIG_CMD_NET
+
#undef CONFIG_SHOW_BOOT_PROGRESS
@@ -162,7 +171,7 @@
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
/* #define CONFIG_INITRD_TAG 1 */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/aev.h b/include/configs/aev.h
index f6f530c..ecd84d3 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -44,11 +44,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -98,27 +93,26 @@
#define CFG_CMD_POST_DIAG 0
#endif
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- ADD_BMP_CMD | \
- CFG_CMD_PCI | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ECHO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_POST
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
#define CONFIG_TIMESTAMP /* display image timestamps */
@@ -324,7 +318,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -343,6 +337,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
* which is normally part of the default commands (CFV_CMD_DFL)
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index df057d9..27f2831 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -210,25 +210,28 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_FPGA | \
- CFG_CMD_NAND | \
- CFG_CMD_REGINFO)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -237,7 +240,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -358,7 +361,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
index 9a1c559..7c77fa7 100644
--- a/include/configs/armadillo.h
+++ b/include/configs/armadillo.h
@@ -73,10 +73,12 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL) /* | CFG_CMD_JFFS2)*/
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200"
diff --git a/include/configs/assabet.h b/include/configs/assabet.h
index 1a69ebe..7c6a65a 100644
--- a/include/configs/assabet.h
+++ b/include/configs/assabet.h
@@ -66,18 +66,23 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
+#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "console=ttySA0,115200n8 root=/dev/nfs ip=bootp"
#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
#define CFG_AUTOLOAD "n" /* No autoload */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 8fad55d..db57dc1 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -97,18 +97,22 @@
#define CONFIG_BOOTDELAY 3
/* #define CONFIG_ENV_OVERWRITE 1 */
-#define CONFIG_COMMANDS \
- ((CONFIG_CMD_DFL | CFG_CMD_MII |\
- CFG_CMD_DHCP ) & \
- ~(CFG_CMD_BDI | \
- CFG_CMD_IMI | \
- CFG_CMD_AUTOSCRIPT | \
- CFG_CMD_FPGA | \
- CFG_CMD_MISC | \
- CFG_CMD_LOADS ))
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DHCP
+
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_LOADS
+
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define SECTORSIZE 512
diff --git a/include/configs/atc.h b/include/configs/atc.h
index bf6c170..cb4e747 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -126,25 +126,27 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_EEPROM | \
- CFG_CMD_PCI | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_DATE | \
- CFG_CMD_IDE)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_IDE
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+#define CONFIG_DOS_PARTITION
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -285,7 +287,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index beaf385..90fe8a5 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -111,44 +111,25 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_SUBNETMASK \
| CONFIG_BOOTP_GATEWAY)
-#define CONFIG_COMMANDS (CFG_CMD_BDI \
- | CFG_CMD_LOADS \
- | CFG_CMD_LOADB \
- | CFG_CMD_IMI \
- /* | CFG_CMD_CACHE */ \
- | CFG_CMD_FLASH \
- | CFG_CMD_MEMORY \
- | CFG_CMD_NET \
- | CFG_CMD_ENV \
- /* | CFG_CMD_IRQ */ \
- | CFG_CMD_BOOTD \
- | CFG_CMD_CONSOLE \
- /* | CFG_CMD_EEPROM */ \
- | CFG_CMD_ASKENV \
- | CFG_CMD_RUN \
- | CFG_CMD_ECHO \
- /* | CFG_CMD_I2C */ \
- | CFG_CMD_REGINFO \
- /* | CFG_CMD_DATE */ \
- | CFG_CMD_DHCP \
- /* | CFG_CMD_AUTOSCRIPT */ \
- /* | CFG_CMD_MII */ \
- | CFG_CMD_MISC \
- /* | CFG_CMD_SDRAM */ \
- /* | CFG_CMD_DIAG */ \
- /* | CFG_CMD_HWFLOW */ \
- /* | CFG_CMD_SAVES */ \
- /* | CFG_CMD_SPI */ \
- /* | CFG_CMD_PING */ \
- | CFG_CMD_MMC \
- | CFG_CMD_FAT \
- | CFG_CMD_IMLS \
- /* | CFG_CMD_ITEST */ \
- | CFG_CMD_EXT2 \
- | CFG_CMD_JFFS2 \
- )
-
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_REGINFO
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+
#define CONFIG_ATMEL_USART 1
#define CONFIG_MACB 1
generated by cgit v1.1 at 2024-11-24 06:45:56 +0000