diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-generic/sections.h | 2 | ||||
| -rw-r--r-- | include/configs/ls2080ardb.h | 26 | ||||
| -rw-r--r-- | include/configs/topic_miami.h | 149 | ||||
| -rw-r--r-- | include/configs/topic_miamiplus.h | 2 | ||||
| -rw-r--r-- | include/configs/xilinx_zynqmp_ep.h | 2 | ||||
| -rw-r--r-- | include/configs/zynq-common.h | 7 | ||||
| -rw-r--r-- | include/efi.h | 7 | ||||
| -rw-r--r-- | include/efi_api.h | 13 | ||||
| -rw-r--r-- | include/efi_loader.h | 2 | ||||
| -rw-r--r-- | include/elf.h | 13 | ||||
| -rw-r--r-- | include/zynqmppl.h | 6 | ||||
| -rw-r--r-- | include/zynqpl.h | 18 |
12 files changed, 242 insertions, 5 deletions
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h index d69bc60..daf021b 100644 --- a/include/asm-generic/sections.h +++ b/include/asm-generic/sections.h @@ -22,6 +22,8 @@ extern char __kprobes_text_start[], __kprobes_text_end[]; extern char __entry_text_start[], __entry_text_end[]; extern char __initdata_begin[], __initdata_end[]; extern char __start_rodata[], __end_rodata[]; +extern char __efi_hello_world_begin[]; +extern char __efi_hello_world_end[]; /* Start and end of .ctors section - used for constructor calls. */ extern char __ctors_start[], __ctors_end[]; diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index b9cb6d3..32fa0eb 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -316,10 +316,25 @@ unsigned long get_board_sys_clk(void); #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 +#undef CONFIG_CMDLINE_EDITING +#include <config_distro_defaults.h> + +#define BOOT_TARGET_DEVICES(func) \ + func(USB, usb, 0) \ + func(MMC, mmc, 0) \ + func(SCSI, scsi, 0) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> + /* Initial environment variables */ #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "scriptaddr=0x80800000\0" \ + "kernel_addr_r=0x81000000\0" \ + "pxefile_addr_r=0x81000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "ramdisk_addr_r=0x89000000\0" \ "loadaddr=0x80100000\0" \ "kernel_addr=0x100000\0" \ "ramdisk_addr=0x800000\0" \ @@ -329,8 +344,10 @@ unsigned long get_board_sys_clk(void); "kernel_start=0x581100000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ + "fdtfile=fsl-ls2080a-rdb.dtb\0" \ "mcinitcmd=fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" + " 0x580800000 \0" \ + BOOTENV #undef CONFIG_BOOTARGS #define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ @@ -338,6 +355,13 @@ unsigned long get_board_sys_clk(void); "ramdisk_size=0x2000000 default_hugepagesz=2m" \ " hugepagesz=2m hugepages=256" +#undef CONFIG_BOOTCOMMAND +/* Try to boot an on-NOR kernel first, then do normal distro boot */ +#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000" \ + " && cp.b $kernel_start $kernel_load $kernel_size" \ + " && bootm $kernel_load" \ + " || run distro_bootcmd" + /* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET #define CONFIG_PHYLIB_10G diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h new file mode 100644 index 0000000..3b0fa29 --- /dev/null +++ b/include/configs/topic_miami.h @@ -0,0 +1,149 @@ +/* + * (C) Copyright 2014 Topic Embedded Products + * + * Configuration for Zynq Evaluation and Development Board - Miami + * See zynq-common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_TOPIC_MIAMI_H +#define __CONFIG_TOPIC_MIAMI_H + +#define CONFIG_ZYNQ_PS_CLK_FREQ 33333333UL + +#define CONFIG_ZYNQ_I2C0 +#define CONFIG_ZYNQ_I2C1 + +/* Speed up boot time by ignoring the environment which we never used */ +#define CONFIG_ENV_IS_NOWHERE + +#include "zynq-common.h" + +/* Fixup settings */ +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE 0x8000 +#undef CONFIG_ENV_OFFSET +#define CONFIG_ENV_OFFSET 0x80000 + +/* SPL settings */ +#undef CONFIG_SPL_ETH_SUPPORT +#undef CONFIG_SYS_SPI_U_BOOT_OFFS +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#undef CONFIG_SPL_MAX_FOOTPRINT +#define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" + +/* sspi command isn't useful */ +#undef CONFIG_CMD_SPI + +/* No useful gpio */ +#undef CONFIG_ZYNQ_GPIO +#undef CONFIG_CMD_GPIO + +/* No falcon support */ +#undef CONFIG_SPL_OS_BOOT +#undef CONFIG_SPL_FPGA_SUPPORT + +/* FPGA commands that we don't use */ +#undef CONFIG_CMD_FPGA_LOADMK +#undef CONFIG_CMD_FPGA_LOADP +#undef CONFIG_CMD_FPGA_LOADBP +#undef CONFIG_CMD_FPGA_LOADFS + +/* Extras */ +#define CONFIG_CMD_MEMTEST +#undef CONFIG_SYS_MEMTEST_START +#define CONFIG_SYS_MEMTEST_START 0 +#undef CONFIG_SYS_MEMTEST_END +#define CONFIG_SYS_MEMTEST_END 0x18000000 + +/* Faster flash, ours may run at 108 MHz */ +#undef CONFIG_SF_DEFAULT_SPEED +#define CONFIG_SF_DEFAULT_SPEED 108000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#undef CONFIG_SF_DUAL_FLASH +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#undef CONFIG_SPI_FLASH_WINBOND +#undef CONFIG_SPI_FLASH_ISSI + +/* Setup proper boot sequences for Miami boards */ + +#if defined(CONFIG_USB) +# define EXTRA_ENV_USB \ + "usbreset=i2c dev 1 && i2c mw 41 1 ff && i2c mw 41 3 fe && "\ + "i2c mw 41 1 fe && i2c mw 41 1 ff\0" \ + "usbboot=run usbreset && if usb start; then " \ + "echo Booting from USB... && " \ + "if load usb 0 0x1900000 ${bootscript}; then "\ + "source 0x1900000; fi; " \ + "load usb 0 ${kernel_addr} ${kernel_image} && " \ + "load usb 0 ${devicetree_addr} ${devicetree_image} && " \ + "load usb 0 ${ramdisk_load_address} ${ramdisk_image} && " \ + "bootm ${kernel_addr} ${ramdisk_load_address} "\ + "${devicetree_addr}; " \ + "fi\0" + /* Note that addresses here should match the addresses in the env */ +# undef DFU_ALT_INFO +# define DFU_ALT_INFO \ + "dfu_alt_info=" \ + "uImage ram 0x2080000 0x500000;" \ + "devicetree.dtb ram 0x2000000 0x20000;" \ + "uramdisk.image.gz ram 0x4000000 0x10000000\0" \ + "dfu_ram=run usbreset && dfu 0 ram 0\0" \ + "thor_ram=run usbreset && thordown 0 ram 0\0" +#else +# define EXTRA_ENV_USB +#endif + +#undef CONFIG_PREBOOT + +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_image=uImage\0" \ + "kernel_addr=0x2080000\0" \ + "ramdisk_image=uramdisk.image.gz\0" \ + "ramdisk_load_address=0x4000000\0" \ + "devicetree_image=devicetree.dtb\0" \ + "devicetree_addr=0x2000000\0" \ + "bitstream_image=fpga.bin\0" \ + "bootscript=autorun.scr\0" \ + "loadbit_addr=0x100000\0" \ + "loadbootenv_addr=0x2000000\0" \ + "kernel_size=0x400000\0" \ + "devicetree_size=0x10000\0" \ + "boot_size=0xF00000\0" \ + "fdt_high=0x20000000\0" \ + "initrd_high=0x20000000\0" \ + "mmc_loadbit=echo Loading bitstream from SD/MMC/eMMC to RAM.. && " \ + "mmcinfo && " \ + "load mmc 0 ${loadbit_addr} ${bitstream_image} && " \ + "fpga load 0 ${loadbit_addr} ${filesize}\0" \ + "qspiboot=echo Booting from QSPI flash... && " \ + "sf probe && " \ + "sf read ${devicetree_addr} 0xA0000 ${devicetree_size} && " \ + "sf read ${kernel_addr} 0xC0000 ${kernel_size} && " \ + "bootm ${kernel_addr} - ${devicetree_addr}\0" \ + "sdboot=if mmcinfo; then " \ + "setenv bootargs console=ttyPS0,115200 " \ + "root=/dev/mmcblk0p2 rw rootfstype=ext4 " \ + "rootwait quiet ; " \ + "load mmc 0 ${kernel_addr} ${kernel_image}&& " \ + "load mmc 0 ${devicetree_addr} ${devicetree_image}&& " \ + "bootm ${kernel_addr} - ${devicetree_addr}; " \ + "fi\0" \ + EXTRA_ENV_USB \ + DFU_ALT_INFO + +#undef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTCOMMAND "if mmcinfo; then " \ + "if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; " \ + "fi; fi; run $modeboot" +#undef CONFIG_DISPLAY_BOARDINFO + +/* Further tweaks to reduce image size */ +#undef CONFIG_CMD_BOOTZ +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_AES + +#endif /* __CONFIG_TOPIC_MIAMI_H */ diff --git a/include/configs/topic_miamiplus.h b/include/configs/topic_miamiplus.h new file mode 100644 index 0000000..46ca6bd --- /dev/null +++ b/include/configs/topic_miamiplus.h @@ -0,0 +1,2 @@ +#include "topic_miami.h" +#define CONFIG_SF_DUAL_FLASH diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h index 8e4b960..d0ce768 100644 --- a/include/configs/xilinx_zynqmp_ep.h +++ b/include/configs/xilinx_zynqmp_ep.h @@ -14,7 +14,7 @@ #define __CONFIG_ZYNQMP_EP_H #define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 -#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ << 9) +#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ >> 9) #define CONFIG_ZYNQ_EEPROM #define CONFIG_SATA_CEVA #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 4f0253c..3a2080f 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -76,6 +76,13 @@ # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #endif +#ifdef CONFIG_NAND_ZYNQ +#define CONFIG_CMD_NAND_LOCK_UNLOCK +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_MTD_DEVICE +#endif + /* MMC */ #if defined(CONFIG_ZYNQ_SDHCI) # define CONFIG_MMC diff --git a/include/efi.h b/include/efi.h index d07187c..3d58780 100644 --- a/include/efi.h +++ b/include/efi.h @@ -30,8 +30,11 @@ struct efi_device_path; #define EFI_BITS_PER_LONG BITS_PER_LONG -/* With 64-bit EFI stub, EFI_BITS_PER_LONG has to be 64 */ -#ifdef CONFIG_EFI_STUB_64BIT +/* + * With 64-bit EFI stub, EFI_BITS_PER_LONG has to be 64. EFI_STUB is set + * in lib/efi/Makefile, when building the stub. + */ +#if defined(CONFIG_EFI_STUB_64BIT) && defined(EFI_STUB) #undef EFI_BITS_PER_LONG #define EFI_BITS_PER_LONG 64 #endif diff --git a/include/efi_api.h b/include/efi_api.h index bdb600e..5c3836a 100644 --- a/include/efi_api.h +++ b/include/efi_api.h @@ -268,6 +268,19 @@ struct efi_device_path { u16 length; }; +struct efi_mac_addr { + u8 addr[32]; +}; + +#define DEVICE_PATH_TYPE_MESSAGING_DEVICE 0x03 +# define DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR 0x0b + +struct efi_device_path_mac_addr { + struct efi_device_path dp; + struct efi_mac_addr mac; + u8 if_type; +}; + #define DEVICE_PATH_TYPE_MEDIA_DEVICE 0x04 # define DEVICE_PATH_SUB_TYPE_FILE_PATH 0x04 diff --git a/include/efi_loader.h b/include/efi_loader.h index 35b3fe2..99619f5 100644 --- a/include/efi_loader.h +++ b/include/efi_loader.h @@ -181,7 +181,7 @@ void efi_get_time_init(void); /* Without CONFIG_EFI_LOADER we don't have a runtime section, stub it out */ #define __efi_runtime_data #define __efi_runtime -static inline void efi_add_runtime_mmio(void **mmio_ptr, u64 len) { } +static inline void efi_add_runtime_mmio(void *mmio_ptr, u64 len) { } /* No loader configured, stub out EFI_ENTRY */ static inline void efi_restore_gd(void) { } diff --git a/include/elf.h b/include/elf.h index bcc5eb7..aaecac7 100644 --- a/include/elf.h +++ b/include/elf.h @@ -13,6 +13,7 @@ #ifndef _ELF_H #define _ELF_H +#ifndef __ASSEMBLER__ #include "compiler.h" /* @@ -517,6 +518,8 @@ unsigned long elf_hash(const unsigned char *name); #define ELF_TARG_VER 1 /* The ver for which this code is intended */ +#endif /* __ASSEMBLER */ + /* * XXX - PowerPC defines really don't belong in here, * but we'll put them in for simplicity. @@ -602,6 +605,16 @@ unsigned long elf_hash(const unsigned char *name); that may still be in object files. */ #define R_PPC_TOC16 255 + /* ARM relocs */ +#define R_ARM_NONE 0 /* No reloc */ +#define R_ARM_RELATIVE 23 /* Adjust by program base */ + +/* AArch64 relocs */ +#define R_AARCH64_NONE 0 /* No relocation. */ +#define R_AARCH64_RELATIVE 1027 /* Adjust by program base. */ + +#ifndef __ASSEMBLER__ int valid_elf_image(unsigned long addr); +#endif #endif /* _ELF_H */ diff --git a/include/zynqmppl.h b/include/zynqmppl.h index 542ace9..fb5200e 100644 --- a/include/zynqmppl.h +++ b/include/zynqmppl.h @@ -16,6 +16,12 @@ #define ZYNQMP_FPGA_OP_LOAD (1 << 1) #define ZYNQMP_FPGA_OP_DONE (1 << 2) +#define ZYNQMP_CSU_IDCODE_DEVICE_CODE_SHIFT 15 +#define ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK (0xf << \ + ZYNQMP_CSU_IDCODE_DEVICE_CODE_SHIFT) +#define ZYNQMP_CSU_IDCODE_SVD_SHIFT 12 +#define ZYNQMP_CSU_IDCODE_SVD_MASK (0xe << ZYNQMP_CSU_IDCODE_SVD_SHIFT) + extern struct xilinx_fpga_op zynqmp_op; #define XILINX_ZYNQMP_DESC \ diff --git a/include/zynqpl.h b/include/zynqpl.h index 1d37a51..5a34a17 100644 --- a/include/zynqpl.h +++ b/include/zynqpl.h @@ -19,7 +19,10 @@ extern struct xilinx_fpga_op zynq_op; # define FPGA_ZYNQPL_OPS NULL #endif +#define XILINX_ZYNQ_7007S 0x3 #define XILINX_ZYNQ_7010 0x2 +#define XILINX_ZYNQ_7012S 0x1c +#define XILINX_ZYNQ_7014S 0x8 #define XILINX_ZYNQ_7015 0x1b #define XILINX_ZYNQ_7020 0x7 #define XILINX_ZYNQ_7030 0xc @@ -28,7 +31,10 @@ extern struct xilinx_fpga_op zynq_op; #define XILINX_ZYNQ_7100 0x16 /* Device Image Sizes */ +#define XILINX_XC7Z007S_SIZE 16669920/8 #define XILINX_XC7Z010_SIZE 16669920/8 +#define XILINX_XC7Z012S_SIZE 28085344/8 +#define XILINX_XC7Z014S_SIZE 32364512/8 #define XILINX_XC7Z015_SIZE 28085344/8 #define XILINX_XC7Z020_SIZE 32364512/8 #define XILINX_XC7Z030_SIZE 47839328/8 @@ -37,10 +43,22 @@ extern struct xilinx_fpga_op zynq_op; #define XILINX_XC7Z100_SIZE 139330784/8 /* Descriptor Macros */ +#define XILINX_XC7Z007S_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z007S_SIZE, NULL, cookie, FPGA_ZYNQPL_OPS, \ + "7z007s" } + #define XILINX_XC7Z010_DESC(cookie) \ { xilinx_zynq, devcfg, XILINX_XC7Z010_SIZE, NULL, cookie, FPGA_ZYNQPL_OPS, \ "7z010" } +#define XILINX_XC7Z012S_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z012S_SIZE, NULL, cookie, FPGA_ZYNQPL_OPS, \ + "7z012s" } + +#define XILINX_XC7Z014S_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z014S_SIZE, NULL, cookie, FPGA_ZYNQPL_OPS, \ + "7z014s" } + #define XILINX_XC7Z015_DESC(cookie) \ { xilinx_zynq, devcfg, XILINX_XC7Z015_SIZE, NULL, cookie, FPGA_ZYNQPL_OPS, \ "7z015" } |