summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/microblaze-generic.h (renamed from include/configs/ml401.h)121
1 files changed, 71 insertions, 50 deletions
diff --git a/include/configs/ml401.h b/include/configs/microblaze-generic.h
index c802dcb..4c6cc9f 100644
--- a/include/configs/ml401.h
+++ b/include/configs/microblaze-generic.h
@@ -25,32 +25,33 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#include "../board/xilinx/ml401/xparameters.h"
+#include "../board/xilinx/microblaze-generic/xparameters.h"
#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */
#define MICROBLAZE_V5 1
-#define CONFIG_ML401 1 /* ML401 Board */
/* uart */
#ifdef XILINX_UARTLITE_BASEADDR
-#define CONFIG_XILINX_UARTLITE
-#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
-#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
-#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+ #define CONFIG_XILINX_UARTLITE
+ #define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
+ #define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
+ #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+ #define CONSOLE_ARG "console=console=ttyUL0,115200\0"
#elif XILINX_UART16550_BASEADDR
-#define CONFIG_SYS_NS16550 1
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
-#define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
-#define CONFIG_BAUDRATE 115200
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+ #define CONFIG_SYS_NS16550 1
+ #define CONFIG_SYS_NS16550_SERIAL
+ #define CONFIG_SYS_NS16550_REG_SIZE -4
+ #define CONFIG_CONS_INDEX 1
+ #define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
+ #define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
+ #define CONFIG_BAUDRATE 115200
+
+ /* The following table includes the supported baudrates */
+ #define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+ #define CONSOLE_ARG "console=console=ttyS0,115200\0"
#else
-#error Undefined uart
+ #error Undefined uart
#endif
/* setting reset address */
@@ -58,44 +59,44 @@
/* ethernet */
#ifdef XILINX_EMAC_BASEADDR
-#define CONFIG_XILINX_EMAC 1
-#define CONFIG_SYS_ENET
-#else
-#ifdef XILINX_EMACLITE_BASEADDR
-#define CONFIG_XILINX_EMACLITE 1
-#define CONFIG_SYS_ENET
-#endif
+ #define CONFIG_XILINX_EMAC 1
+ #define CONFIG_SYS_ENET
+#elif XILINX_EMACLITE_BASEADDR
+ #define CONFIG_XILINX_EMACLITE 1
+ #define CONFIG_SYS_ENET
+#elif XILINX_LLTEMAC_BASEADDR
+ #define CONFIG_XILINX_LL_TEMAC 1
+ #define CONFIG_SYS_ENET
#endif
+
#undef ET_DEBUG
/* gpio */
#ifdef XILINX_GPIO_BASEADDR
-#define CONFIG_SYS_GPIO_0 1
-#define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
+ #define CONFIG_SYS_GPIO_0 1
+ #define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
#endif
/* interrupt controller */
#ifdef XILINX_INTC_BASEADDR
-#define CONFIG_SYS_INTC_0 1
-#define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
-#define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
+ #define CONFIG_SYS_INTC_0 1
+ #define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
+ #define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
#endif
/* timer */
#ifdef XILINX_TIMER_BASEADDR
-#if (XILINX_TIMER_IRQ != -1)
-#define CONFIG_SYS_TIMER_0 1
-#define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
-#define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
-#define FREQUENCE XILINX_CLOCK_FREQ
-#define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
-#endif
-#else
-#ifdef XILINX_CLOCK_FREQ
-#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
+ #if (XILINX_TIMER_IRQ != -1)
+ #define CONFIG_SYS_TIMER_0 1
+ #define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
+ #define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
+ #define FREQUENCE XILINX_CLOCK_FREQ
+ #define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
+ #endif
+#elif XILINX_CLOCK_FREQ
+ #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
#else
-#error BAD CLOCK FREQ
-#endif
+ #error BAD CLOCK FREQ
#endif
/* FSL */
/* #define CONFIG_SYS_FSL_2 */
@@ -160,7 +161,7 @@
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
- #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
#define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */
#ifdef RAMENV
@@ -170,9 +171,9 @@
#else /* !RAMENV */
#define CONFIG_ENV_IS_IN_FLASH 1
- #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
- #define CONFIG_ENV_SIZE 0x40000
+ #define CONFIG_ENV_SIZE 0x20000
#endif /* !RAMBOOT */
#else /* !FLASH */
/* ENV in RAM */
@@ -193,6 +194,18 @@
#define CONFIG_DOS_PARTITION
#endif
+#if defined(XILINX_USE_ICACHE)
+ #define CONFIG_ICACHE
+#else
+ #undef CONFIG_ICACHE
+#endif
+
+#if defined(XILINX_USE_DCACHE)
+ #define CONFIG_DCACHE
+#else
+ #undef CONFIG_DCACHE
+#endif
+
/*
* BOOTP options
*/
@@ -207,9 +220,15 @@
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MFSL
+#define CONFIG_CMD_ECHO
+
+#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
+ #define CONFIG_CMD_CACHE
+#else
+ #undef CONFIG_CMD_CACHE
+#endif
#ifndef CONFIG_SYS_ENET
#undef CONFIG_CMD_NET
@@ -233,7 +252,9 @@
#define CONFIG_CMD_SAVES
#endif
#else
+ #undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_FLASH
+ #undef CONFIG_CMD_JFFS2
#endif
#if defined(CONFIG_CMD_JFFS2)
@@ -253,11 +274,11 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_LOAD_ADDR 0x12000000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START /* default load address */
-#define CONFIG_BOOTDELAY 30
+#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
#define CONFIG_BOOTARGS "root=romfs"
-#define CONFIG_HOSTNAME "ml401"
+#define CONFIG_HOSTNAME XILINX_BOARD_NAME
#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_IPADDR 192.168.0.3
#define CONFIG_SERVERIP 192.168.0.5
@@ -268,7 +289,7 @@
#define CONFIG_SYS_USR_EXCEP /* user exception */
#define CONFIG_SYS_HZ 1000
-#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo"
+#define CONFIG_PREBOOT "echo U-BOOT for $(hostname);setenv preboot;echo"
#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\
"nor0=ml401-0\0"\