diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/ata.h | 60 | ||||
-rw-r--r-- | include/configs/JSE.h | 1 | ||||
-rw-r--r-- | include/configs/sc520_cdp.h | 9 | ||||
-rw-r--r-- | include/sata.h | 108 |
4 files changed, 178 insertions, 0 deletions
diff --git a/include/ata.h b/include/ata.h index 8584226..aa6e90d 100644 --- a/include/ata.h +++ b/include/ata.h @@ -83,6 +83,66 @@ #define ATA_DEVICE(x) ((x & 1)<<4) #define ATA_LBA 0xE0 +enum { + ATA_MAX_DEVICES = 1, /* per bus/port */ + ATA_MAX_PRD = 256, /* we could make these 256/256 */ + ATA_SECT_SIZE = 256, /*256 words per sector */ + + /* bits in ATA command block registers */ + ATA_HOB = (1 << 7), /* LBA48 selector */ + ATA_NIEN = (1 << 1), /* disable-irq flag */ + /*ATA_LBA = (1 << 6), */ /* LBA28 selector */ + ATA_DEV1 = (1 << 4), /* Select Device 1 (slave) */ + ATA_DEVICE_OBS = (1 << 7) | (1 << 5), /* obs bits in dev reg */ + ATA_DEVCTL_OBS = (1 << 3), /* obsolete bit in devctl reg */ + ATA_BUSY = (1 << 7), /* BSY status bit */ + ATA_DRDY = (1 << 6), /* device ready */ + ATA_DF = (1 << 5), /* device fault */ + ATA_DRQ = (1 << 3), /* data request i/o */ + ATA_ERR = (1 << 0), /* have an error */ + ATA_SRST = (1 << 2), /* software reset */ + ATA_ABORTED = (1 << 2), /* command aborted */ + /* ATA command block registers */ + ATA_REG_DATA = 0x00, + ATA_REG_ERR = 0x01, + ATA_REG_NSECT = 0x02, + ATA_REG_LBAL = 0x03, + ATA_REG_LBAM = 0x04, + ATA_REG_LBAH = 0x05, + ATA_REG_DEVICE = 0x06, + ATA_REG_STATUS = 0x07, + ATA_PCI_CTL_OFS = 0x02, + /* and their aliases */ + ATA_REG_FEATURE = ATA_REG_ERR, + ATA_REG_CMD = ATA_REG_STATUS, + ATA_REG_BYTEL = ATA_REG_LBAM, + ATA_REG_BYTEH = ATA_REG_LBAH, + ATA_REG_DEVSEL = ATA_REG_DEVICE, + ATA_REG_IRQ = ATA_REG_NSECT, + + /* SETFEATURES stuff */ + SETFEATURES_XFER = 0x03, + XFER_UDMA_7 = 0x47, + XFER_UDMA_6 = 0x46, + XFER_UDMA_5 = 0x45, + XFER_UDMA_4 = 0x44, + XFER_UDMA_3 = 0x43, + XFER_UDMA_2 = 0x42, + XFER_UDMA_1 = 0x41, + XFER_UDMA_0 = 0x40, + XFER_MW_DMA_2 = 0x22, + XFER_MW_DMA_1 = 0x21, + XFER_MW_DMA_0 = 0x20, + XFER_PIO_4 = 0x0C, + XFER_PIO_3 = 0x0B, + XFER_PIO_2 = 0x0A, + XFER_PIO_1 = 0x09, + XFER_PIO_0 = 0x08, + XFER_SW_DMA_2 = 0x12, + XFER_SW_DMA_1 = 0x11, + XFER_SW_DMA_0 = 0x10, + XFER_PIO_SLOW = 0x00 +}; /* * ATA Commands (only mandatory commands listed here) */ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index ccd1f19..7fa9ed2 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -49,6 +49,7 @@ /* Map the SystemACE chip (CS#1) here. (Must be a multiple of 1Meg) */ #define CONFIG_SYSTEMACE 1 #define CFG_SYSTEMACE_BASE 0xf0000000 +#define CFG_SYSTEMACE_WIDTH 8 #define CONFIG_DOS_PARTITION 1 /* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */ diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h index d7d07a6..8b2ec07 100644 --- a/include/configs/sc520_cdp.h +++ b/include/configs/sc520_cdp.h @@ -182,6 +182,15 @@ #undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */ /************************************************************ +*SATA/Native Stuff +************************************************************/ +#define CFG_SATA_SUPPORTED 1 +#define CFG_SATA_MAXBUS 2 /*Max Sata buses supported */ +#define CFG_SATA_DEVS_PER_BUS 2 /*Max no. of devices per bus/port */ +#define CFG_SATA_MAXDEVICES (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS) +#define CFG_ATA_PIIX 1 /*Supports ata_piix driver */ + +/************************************************************ * ATAPI support (experimental) ************************************************************/ #define CONFIG_ATAPI /* enable ATAPI Support */ diff --git a/include/sata.h b/include/sata.h new file mode 100644 index 0000000..a8713f8 --- /dev/null +++ b/include/sata.h @@ -0,0 +1,108 @@ + +#if (DEBUG_SATA) +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +struct sata_ioports { + unsigned long cmd_addr; + unsigned long data_addr; + unsigned long error_addr; + unsigned long feature_addr; + unsigned long nsect_addr; + unsigned long lbal_addr; + unsigned long lbam_addr; + unsigned long lbah_addr; + unsigned long device_addr; + unsigned long status_addr; + unsigned long command_addr; + unsigned long altstatus_addr; + unsigned long ctl_addr; + unsigned long bmdma_addr; + unsigned long scr_addr; +}; + +struct sata_port { + unsigned char port_no; /* primary=0, secondary=1 */ + struct sata_ioports ioaddr; /* ATA cmd/ctl/dma reg blks */ + unsigned char ctl_reg; + unsigned char last_ctl; + unsigned char port_state; /* 1-port is present and */ + 0-port is not available */ + unsigned char dev_mask; +}; + +/***********SATA LIBRARY SPECIFIC DEFINITIONS AND DECLARATIONS**************/ +#ifdef SATA_DECL /*SATA library specific declarations */ +#define ata_id_has_lba48(id) ((id)[83] & (1 << 10)) +#define ata_id_has_lba(id) ((id)[49] & (1 << 9)) +#define ata_id_has_dma(id) ((id)[49] & (1 << 8)) +#define ata_id_u32(id,n) \ + (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)])) +#define ata_id_u64(id,n) \ + (((u64) (id)[(n) + 3] << 48) | \ + ((u64) (id)[(n) + 2] << 32) | \ + ((u64) (id)[(n) + 1] << 16) | \ + ((u64) (id)[(n) + 0]) ) +#endif + +#ifdef SATA_DECL /*SATA library specific declarations */ +static inline void +ata_dump_id (u16 * id) +{ + PRINTF ("49==0x%04x " + "53==0x%04x " + "63==0x%04x " + "64==0x%04x " + "75==0x%04x \n", id[49], id[53], id[63], id[64], id[75]); + PRINTF ("80==0x%04x " + "81==0x%04x " + "82==0x%04x " + "83==0x%04x " + "84==0x%04x \n", id[80], id[81], id[82], id[83], id[84]); + PRINTF ("88==0x%04x " "93==0x%04x\n", id[88], id[93]); +} +#endif + +#ifdef SATA_DECL /*SATA library specific declarations */ +int sata_bus_softreset (int num); +void sata_identify (int num, int dev); +void sata_port (struct sata_ioports *ioport); +void set_Feature_cmd (int num, int dev); +int sata_devchk (struct sata_ioports *ioaddr, int dev); +void dev_select (struct sata_ioports *ioaddr, int dev); +u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int max); +u8 sata_chk_status (struct sata_ioports *ioaddr); +ulong sata_read (int device, lbaint_t blknr, ulong blkcnt, ulong * buffer); +ulong sata_write (int device, lbaint_t blknr, ulong blkcnt, ulong * buffer); +void msleep (int count); +#else +extern int sata_bus_softreset (int num); +extern void sata_identify (int num, int dev); +extern void sata_port (struct sata_ioports *ioport); +extern void set_Feature_cmd (int num, int dev); +extern ulong sata_read (int device, lbaint_t blknr, + ulong blkcnt, ulong * buffer); +extern ulong sata_write (int device, lbaint_t blknr, + ulong blkcnt, ulong * buffer); +extern void msleep (int count); +#endif + +/************DRIVER SPECIFIC DEFINITIONS AND DECLARATIONS**************/ + +#ifdef DRV_DECL /*Driver specific declaration */ +int init_sata (void); +#else +extern int init_sata (void); +#endif + +#ifdef DRV_DECL /*Defines Driver Specific variables */ +struct sata_port port[CFG_SATA_MAXBUS]; +block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES]; +int curr_dev = -1; +#else +extern struct sata_port port[CFG_SATA_MAXBUS]; +extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES]; +extern int curr_dev; +#endif |