diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/atngw100.h | 3 | ||||
| -rw-r--r-- | include/configs/atstk1002.h | 3 | ||||
| -rw-r--r-- | include/configs/atstk1003.h | 3 | ||||
| -rw-r--r-- | include/configs/atstk1004.h | 3 | ||||
| -rw-r--r-- | include/configs/atstk1006.h | 3 | ||||
| -rw-r--r-- | include/configs/cpuat91.h | 53 | ||||
| -rw-r--r-- | include/configs/favr-32-ezkit.h | 3 | ||||
| -rw-r--r-- | include/configs/hammerhead.h | 3 | ||||
| -rw-r--r-- | include/configs/jadecpu.h | 291 | ||||
| -rw-r--r-- | include/configs/meesc.h | 26 | ||||
| -rw-r--r-- | include/configs/mimc200.h | 3 | ||||
| -rw-r--r-- | include/configs/omap3_beagle.h | 4 | ||||
| -rw-r--r-- | include/configs/omap3_overo.h | 4 | ||||
| -rw-r--r-- | include/configs/otc570.h | 1 | ||||
| -rw-r--r-- | include/configs/s5p_goni.h | 2 | ||||
| -rw-r--r-- | include/configs/smdkc100.h | 2 | ||||
| -rw-r--r-- | include/mmc.h | 15 | ||||
| -rw-r--r-- | include/serial.h | 8 | ||||
| -rw-r--r-- | include/twl4030.h | 14 |
19 files changed, 411 insertions, 33 deletions
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 4ed5514..83056b6 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -49,6 +49,9 @@ #define CONFIG_SYS_CLKDIV_PBA 2 #define CONFIG_SYS_CLKDIV_PBB 1 +/* Reserve VM regions for SDRAM and NOR flash */ +#define CONFIG_SYS_NR_VM_REGIONS 2 + /* * The PLLOPT register controls the PLL like this: * icp = PLLOPT<2> diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index b258f2d..6416d17 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -73,6 +73,9 @@ */ #define CONFIG_SYS_CLKDIV_PBB 1 +/* Reserve VM regions for SDRAM and NOR flash */ +#define CONFIG_SYS_NR_VM_REGIONS 2 + /* * The PLLOPT register controls the PLL like this: * icp = PLLOPT<2> diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h index 2ef2552..a4d9b0b 100644 --- a/include/configs/atstk1003.h +++ b/include/configs/atstk1003.h @@ -73,6 +73,9 @@ */ #define CONFIG_SYS_CLKDIV_PBB 1 +/* Reserve VM regions for SDRAM and NOR flash */ +#define CONFIG_SYS_NR_VM_REGIONS 2 + /* * The PLLOPT register controls the PLL like this: * icp = PLLOPT<2> diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index 195be82..06bb5da 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -73,6 +73,9 @@ */ #define CONFIG_SYS_CLKDIV_PBB 1 +/* Reserve VM regions for SDRAM and NOR flash */ +#define CONFIG_SYS_NR_VM_REGIONS 2 + /* * The PLLOPT register controls the PLL like this: * icp = PLLOPT<2> diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index f93118e..d3cbee6 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -73,6 +73,9 @@ */ #define CONFIG_SYS_CLKDIV_PBB 1 +/* Reserve VM regions for SDRAM and NOR flash */ +#define CONFIG_SYS_NR_VM_REGIONS 2 + /* * The PLLOPT register controls the PLL like this: * icp = PLLOPT<2> diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index 049298c..9ef4523 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -1,5 +1,5 @@ /* - * CPUAT91 by (C) Copyright 2006 Eric Benard + * CPUAT91 by (C) Copyright 2006-2010 Eric Benard * eric@eukrea.com * * Configuration settings for the CPUAT91 board. @@ -23,15 +23,12 @@ * MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY +#ifndef _CONFIG_CPUAT91_H +#define _CONFIG_CPUAT91_H #ifdef CONFIG_CPUAT91_RAM #define CONFIG_SKIP_LOWLEVEL_INIT 1 #define CONFIG_SKIP_RELOCATE_UBOOT 1 -#define CONFIG_CPUAT91 1 #else #define CONFIG_BOOTDELAY 1 #endif @@ -43,6 +40,7 @@ #define CONFIG_ARM920T 1 #define CONFIG_AT91RM9200 1 +#define CONFIG_CPUAT91 1 #undef CONFIG_USE_IRQ #define USE_920T_MMU 1 @@ -89,16 +87,36 @@ #undef CONFIG_USART0 #undef CONFIG_USART1 -#define CONFIG_HARD_I2C 1 +#undef CONFIG_HARD_I2C +#define CONFIG_SOFT_I2C 1 +#define AT91_PIN_SDA (1<<25) +#define AT91_PIN_SCL (1<<26) + +#define CONFIG_SYS_I2C_INIT_BOARD 1 +#define CONFIG_SYS_I2C_SPEED 50000 +#define CONFIG_SYS_I2C_SLAVE 0 + +#define I2C_INIT i2c_init_board(); +#define I2C_ACTIVE writel(AT91_PMX_AA_TWD, &pio->pioa.mddr); +#define I2C_TRISTATE writel(AT91_PMX_AA_TWD, &pio->pioa.mder); +#define I2C_READ ((readl(&pio->pioa.pdsr) & AT91_PMX_AA_TWD) != 0) +#define I2C_SDA(bit) \ + if (bit) \ + writel(AT91_PMX_AA_TWD, &pio->pioa.sodr); \ + else \ + writel(AT91_PMX_AA_TWD, &pio->pioa.codr); +#define I2C_SCL(bit) \ + if (bit) \ + writel(AT91_PMX_AA_TWCK, &pio->pioa.sodr); \ + else \ + writel(AT91_PMX_AA_TWCK, &pio->pioa.codr); + +#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED) -#if defined(CONFIG_HARD_I2C) -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 -#endif #define CONFIG_BOOTP_BOOTFILESIZE 1 #define CONFIG_BOOTP_BOOTPATH 1 @@ -117,10 +135,8 @@ #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_NFS -#if defined(CONFIG_HARD_I2C) #define CONFIG_CMD_EEPROM 1 #define CONFIG_CMD_I2C 1 -#endif #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 @@ -148,6 +164,7 @@ #define PHYS_FLASH_1 0x10000000 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MAX_FLASH_SECT 128 +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #if defined(CONFIG_CMD_USB) #define CONFIG_USB_OHCI_NEW 1 @@ -206,7 +223,7 @@ "mtdparts=physmap-flash.0:" \ "128k(u-boot)ro," \ "128k(u-boot-env)," \ - "1408k(kernel)," \ + "1792k(kernel)," \ "-(rootfs)" #define CONFIG_BOOTARGS \ @@ -221,13 +238,13 @@ "1001FFFF; erase 10000000 1001FFFF; cp.b 21000000 " \ "10000000 ${filesize}\0" \ "flui=tftp 21000000 cpuat91/uImage; protect off 10040000 " \ - "1019ffff; erase 10040000 1019ffff; cp.b 21000000 " \ + "1019ffff; erase 10040000 101fffff; cp.b 21000000 " \ "10040000 ${filesize}\0" \ "flrfs=tftp 21000000 cpuat91/rootfs.jffs2; protect off " \ - "101a0000 10ffffff; erase 101a0000 10ffffff; cp.b " \ - "21000000 101A0000 ${filesize}\0" \ + "10200000 10ffffff; erase 10200000 10ffffff; cp.b " \ + "21000000 10200000 ${filesize}\0" \ "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ "flashboot=run ramargs;bootm 10040000\0" \ "netboot=run ramargs;tftpboot 21000000 cpuat91/uImage;" \ "bootm 21000000\0" -#endif /* __CONFIG_H */ +#endif /* _CONFIG_CPUAT91_H */ diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h index 739ff0d..1c381c7 100644 --- a/include/configs/favr-32-ezkit.h +++ b/include/configs/favr-32-ezkit.h @@ -70,6 +70,9 @@ */ #define CONFIG_SYS_CLKDIV_PBB 1 +/* Reserve VM regions for SDRAM and NOR flash */ +#define CONFIG_SYS_NR_VM_REGIONS 2 + /* * The PLLOPT register controls the PLL like this: * icp = PLLOPT<2> diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h index 0c70af5..8ca04ea 100644 --- a/include/configs/hammerhead.h +++ b/include/configs/hammerhead.h @@ -47,6 +47,9 @@ #define CONFIG_SYS_CLKDIV_PBA 2 #define CONFIG_SYS_CLKDIV_PBB 1 +/* Reserve VM regions for SDRAM and NOR flash */ +#define CONFIG_SYS_NR_VM_REGIONS 2 + /* * The PLLOPT register controls the PLL like this: * icp = PLLOPT<2> diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h new file mode 100644 index 0000000..29c534c --- /dev/null +++ b/include/configs/jadecpu.h @@ -0,0 +1,291 @@ +/* + * (C) Copyright 2010 + * Matthias Weisser <weisserm@arcor.de> + * + * Configuation settings for the jadecpu board + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MB86R0x +#define CONFIG_MB86R0x_IOCLK get_bus_freq(0) +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Environment settings + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "gs_fast_boot=setenv bootdelay 5\0" \ + "gs_slow_boot=setenv bootdelay 10\0" \ + "bootcmd=mw.l 0x40000000 0 1024; usb start;" \ + "fatls usb 0; fatload usb 0 0x40000000 jadecpu-init.bin;" \ + "bootelf 0x40000000\0" \ + "" + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define BOARD_LATE_INIT 1 + +/* + * Compressions + */ +#define CONFIG_LZO + +/* + * Hardware drivers + */ + +/* + * Serial + */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#define CONFIG_SYS_NS16550_COM1 0xfffe1000 /* UART 0 */ +#define CONFIG_SYS_NS16550_COM2 0xfff50000 /* UART 2 */ +#define CONFIG_SYS_NS16550_COM3 0xfff51000 /* UART 3 */ +#define CONFIG_SYS_NS16550_COM4 0xfff43000 /* UART 4 */ + +#define CONFIG_CONS_INDEX 4 + +/* + * Ethernet + */ +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X +#define CONFIG_SMC911X_BASE 0x02000000 +#define CONFIG_SMC911X_16_BIT + +/* + * Video + */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_MB86R0xGDC +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CFB_CONSOLE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE +#define CONFIG_VIDEO_LOGO +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (800*480 + 256*4 + 10*1024) +#define VIDEO_FB_16BPP_WORD_SWAP +#define VIDEO_KBD_INIT_FCT 0 +#define VIDEO_TSTC_FCT serial_tstc +#define VIDEO_GETC_FCT serial_getc + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_XIMG + +#define CONFIG_CMD_BMP 1 +#define CONFIG_CMD_CAN 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_ELF 1 +#define CONFIG_CMD_FAT 1 +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_USB 1 + +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* USB */ +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0xFFF81000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mb86r0x" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x40000000 /* Start address of DDRRAM */ +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ + +/* + * FLASH and environment organization + */ +#define CONFIG_SYS_FLASH_BASE 0x10000000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE (128 * 1024) + +/* + * CFI FLASH driver setup + */ +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster */ + +#define CONFIG_SYS_LOAD_ADDR 0x40000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024)) +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_PROMPT "jade> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define CONFIG_PREBOOT "" + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR "delaygs" +#define CONFIG_AUTOBOOT_STOP_STR "stopgs" + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (0x400000 - 0x8000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +/* + * Clock reset generator init + */ +#define CONFIG_SYS_CRG_CRHA_INIT 0xffff +#define CONFIG_SYS_CRG_CRPA_INIT 0xffff +#define CONFIG_SYS_CRG_CRPB_INIT 0xfffe +#define CONFIG_SYS_CRG_CRHB_INIT 0xffff +#define CONFIG_SYS_CRG_CRAM_INIT 0xffef + +/* + * Memory controller settings + */ +#define CONFIG_SYS_MEMC_MCFMODE0_INIT 0x00000001 /* 16bit */ +#define CONFIG_SYS_MEMC_MCFMODE2_INIT 0x00000001 /* 16bit */ +#define CONFIG_SYS_MEMC_MCFMODE4_INIT 0x00000021 /* 16bit, Page*/ +#define CONFIG_SYS_MEMC_MCFTIM0_INIT 0x16191008 +#define CONFIG_SYS_MEMC_MCFTIM2_INIT 0x03061008 +#define CONFIG_SYS_MEMC_MCFTIM4_INIT 0x03061804 +#define CONFIG_SYS_MEMC_MCFAREA0_INIT 0x000000c0 /* 0x0c000000 1MB */ +#define CONFIG_SYS_MEMC_MCFAREA2_INIT 0x00000020 /* 0x02000000 1MB */ +#define CONFIG_SYS_MEMC_MCFAREA4_INIT 0x001f0000 /* 0x10000000 32 MB */ + +/* + * DDR2 controller init settings + */ +#define CONFIG_SYS_DDR2_DRIMS_INIT 0x5555 +#define CONFIG_SYS_CCNT_CDCRC_INIT_1 0x00000002 +#define CONFIG_SYS_CCNT_CDCRC_INIT_2 0x00000003 +#define CONFIG_SYS_DDR2_DRIC1_INIT 0x003f +#define CONFIG_SYS_DDR2_DRIC2_INIT 0x0000 +#define CONFIG_SYS_DDR2_DRCA_INIT 0xc124 /* 512Mbit DDR2SDRAM x 2 */ +#define CONFIG_SYS_DDR2_DRCM_INIT 0x0032 +#define CONFIG_SYS_DDR2_DRCST1_INIT 0x3418 +#define CONFIG_SYS_DDR2_DRCST2_INIT 0x6e32 +#define CONFIG_SYS_DDR2_DRCR_INIT 0x0141 +#define CONFIG_SYS_DDR2_DRCF_INIT 0x0002 +#define CONFIG_SYS_DDR2_DRASR_INIT 0x0001 +#define CONFIG_SYS_DDR2_DROBS_INIT 0x0001 +#define CONFIG_SYS_DDR2_DROABA_INIT 0x0103 +#define CONFIG_SYS_DDR2_DRIBSODT1_INIT 0x003F +#define CONFIG_SYS_DDR2_DROS_INIT 0x0001 + +/* + * DRAM init sequence + */ + +/* PALL Command */ +#define CONFIG_SYS_DDR2_INIT_DRIC1_1 0x0017 +#define CONFIG_SYS_DDR2_INIT_DRIC2_1 0x0400 + +/* EMR(2) command */ +#define CONFIG_SYS_DDR2_INIT_DRIC1_2 0x0006 +#define CONFIG_SYS_DDR2_INIT_DRIC2_2 0x0000 + +/* EMR(3) command */ +#define CONFIG_SYS_DDR2_INIT_DRIC1_3 0x0007 +#define CONFIG_SYS_DDR2_INIT_DRIC2_3 0x0000 + +/* EMR(1) command */ +#define CONFIG_SYS_DDR2_INIT_DRIC1_4 0x0005 +#define CONFIG_SYS_DDR2_INIT_DRIC2_4 0x0000 + +/* MRS command */ +#define CONFIG_SYS_DDR2_INIT_DRIC1_5 0x0004 +#define CONFIG_SYS_DDR2_INIT_DRIC2_5 0x0532 + +/* PALL command */ +#define CONFIG_SYS_DDR2_INIT_DRIC1_6 0x0017 +#define CONFIG_SYS_DDR2_INIT_DRIC2_6 0x0400 + +/* REF command 1 */ +#define CONFIG_SYS_DDR2_INIT_DRIC1_7 0x000f +#define CONFIG_SYS_DDR2_INIT_DRIC2_7 0x0000 + +/* MRS command */ +#define CONFIG_SYS_DDR2_INIT_DRIC1_8 0x0004 +#define CONFIG_SYS_DDR2_INIT_DRIC2_8 0x0432 + +/* EMR(1) command */ +#define CONFIG_SYS_DDR2_INIT_DRIC1_9 0x0005 +#define CONFIG_SYS_DDR2_INIT_DRIC2_9 0x0380 + +/* EMR(1) command */ +#define CONFIG_SYS_DDR2_INIT_DRIC1_10 0x0005 +#define CONFIG_SYS_DDR2_INIT_DRIC2_10 0x0002 + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index e085f4a..dbb2531 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -3,7 +3,7 @@ * Stelian Pop <stelian.pop@leadtechdesign.com> * Lead Tech Design <www.leadtechdesign.com> * - * (C) Copyright 2009 + * (C) Copyright 2009-2010 * Daniel Gorsulowski <daniel.gorsulowski@esd.eu> * esd electronic system design gmbh <www.esd.eu> * @@ -31,13 +31,12 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_AT91_LEGACY - /* Common stuff */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq */ #define CONFIG_MEESC 1 /* Board is esd MEESC */ #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ #define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */ +#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq */ #define CONFIG_DISPLAY_BOARDINFO 1 #define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */ #define CONFIG_PREBOOT /* enable preboot variable */ @@ -85,11 +84,11 @@ #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_USB #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 /* LED */ #define CONFIG_AT91_LED 1 @@ -121,9 +120,9 @@ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 - +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ @@ -133,6 +132,17 @@ #define CONFIG_NET_RETRY_COUNT 20 #undef CONFIG_RESET_PHY_R +/* USB */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_CMD_FAT 1 + #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h index 36488b3..6ed9e75 100644 --- a/include/configs/mimc200.h +++ b/include/configs/mimc200.h @@ -51,6 +51,9 @@ #define CONFIG_SYS_CLKDIV_PBA 2 #define CONFIG_SYS_CLKDIV_PBB 1 +/* Reserve VM regions for SDRAM, NOR flash and FRAM */ +#define CONFIG_SYS_NR_VM_REGIONS 3 + /* * The PLLOPT register controls the PLL like this: * icp = PLLOPT<2> diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index ae5a791..71553f9 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -158,6 +158,7 @@ /* * Board NAND Info. */ +#define CONFIG_SYS_NAND_QUIET_TEST 1 #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ @@ -183,6 +184,7 @@ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ "console=ttyS2,115200n8\0" \ + "mpurate=500\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16@60\0" \ "defaultdisplay=dvi\0" \ @@ -191,6 +193,7 @@ "nandroot=/dev/mtdblock4 rw\0" \ "nandrootfstype=jffs2\0" \ "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ "vram=${vram} " \ "omapfb.mode=dvi:${dvimode} " \ "omapfb.debug=y " \ @@ -198,6 +201,7 @@ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ "nandargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ "vram=${vram} " \ "omapfb.mode=dvi:${dvimode} " \ "omapfb.debug=y " \ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 3a3b389..a0e0f24 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -129,6 +129,7 @@ /* * Board NAND Info. */ +#define CONFIG_SYS_NAND_QUIET_TEST 1 #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ @@ -153,6 +154,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyS2,115200n8\0" \ + "mpurate=500\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16@60\0" \ "defaultdisplay=dvi\0" \ @@ -161,6 +163,7 @@ "nandroot=/dev/mtdblock4 rw\0" \ "nandrootfstype=jffs2\0" \ "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ "vram=${vram} " \ "omapfb.mode=dvi:${dvimode} " \ "omapfb.debug=y " \ @@ -168,6 +171,7 @@ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ "nandargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ "vram=${vram} " \ "omapfb.mode=dvi:${dvimode} " \ "omapfb.debug=y " \ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index fb0f576..4a1cede 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -35,6 +35,7 @@ #define CONFIG_OTC570 1 /* Board is esd OTC570 */ #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ #define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */ +#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ #define CONFIG_SYS_HZ 1000 /* decrementer freq */ #define CONFIG_DISPLAY_BOARDINFO 1 #define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index c8ea8fd..dc01ceb 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -30,7 +30,7 @@ /* High Level Configuration Options */ #define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ -#define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */ +#define CONFIG_S5P 1 /* which is in a S5P Family */ #define CONFIG_S5PC110 1 /* which is in a S5PC110 */ #define CONFIG_MACH_GONI 1 /* working with Goni */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 76a47c4..595d174 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -34,7 +34,7 @@ */ #define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ -#define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */ +#define CONFIG_S5P 1 /* which is in a S5P Family */ #define CONFIG_S5PC100 1 /* which is in a S5PC100 */ #define CONFIG_SMDKC100 1 /* working with SMDKC100 */ diff --git a/include/mmc.h b/include/mmc.h index fcb237e..9f94f42 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -179,6 +179,16 @@ struct mmc_cid { char pnm[7]; }; +/* + * WARNING! + * + * This structure is used by atmel_mci.c only. + * It works for the AVR32 architecture but NOT + * for ARM/AT91 architectures. + * Its use is highly depreciated. + * After the atmel_mci.c driver for AVR32 has + * been replaced this structure will be removed. + */ struct mmc_csd { u8 csd_structure:2, @@ -275,7 +285,10 @@ int mmc_set_dev(int dev_num); void print_mmc_devices(char separator); int board_mmc_getcd(u8 *cd, struct mmc *mmc); -#ifndef CONFIG_GENERIC_MMC +#ifdef CONFIG_GENERIC_MMC +int atmel_mci_init(void *regs); +#else int mmc_legacy_init(int verbose); #endif + #endif /* _MMC_H_ */ diff --git a/include/serial.h b/include/serial.h index 6513d8e..15ab73c 100644 --- a/include/serial.h +++ b/include/serial.h @@ -25,9 +25,9 @@ extern struct serial_device * default_serial_console (void); #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) || \ - defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC83xx) || \ - defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \ - defined(CONFIG_SYS_SC520) + defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \ + defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ + defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) extern struct serial_device serial0_device; extern struct serial_device serial1_device; #if defined(CONFIG_SYS_NS16550_SERIAL) @@ -52,7 +52,7 @@ extern struct serial_device s3c24xx_serial1_device; extern struct serial_device s3c24xx_serial2_device; #endif -#if defined(CONFIG_S5PC1XX) +#if defined(CONFIG_S5P) extern struct serial_device s5p_serial0_device; extern struct serial_device s5p_serial1_device; extern struct serial_device s5p_serial2_device; diff --git a/include/twl4030.h b/include/twl4030.h index 2b2f5ae..930c285 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -304,6 +304,17 @@ #define TWL4030_PM_RECEIVER_MAINREF_TYPE 0xF0 #define TWL4030_PM_RECEIVER_MAINREF_REMAP 0xF1 +/* Voltage Selection in PM Receiver Module */ +#define TWL4030_PM_RECEIVER_VAUX2_VSEL_18 0x05 +#define TWL4030_PM_RECEIVER_VAUX3_VSEL_28 0x03 +#define TWL4030_PM_RECEIVER_VPLL2_VSEL_18 0x05 +#define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03 +#define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02 + +/* Device Selection in PM Receiver Module */ +#define TWL4030_PM_RECEIVER_DEV_GRP_P1 0x20 +#define TWL4030_PM_RECEIVER_DEV_GRP_ALL 0xE0 + /* LED */ #define TWL4030_LED_LEDEN 0xEE #define TWL4030_LED_LEDEN_LEDAON (1 << 0) @@ -500,6 +511,9 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg) /* For hardware resetting */ void twl4030_power_reset_init(void); +/* For setting device group and voltage */ +void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, + u8 dev_grp, u8 dev_grp_sel); /* For initializing power device */ void twl4030_power_init(void); /* For initializing mmc power */ |