diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/omap3_evm.h | 422 |
1 files changed, 226 insertions, 196 deletions
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 7a76288..ed6da30 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -36,42 +36,80 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ -#define CONFIG_OMAP3_EVM 1 /* working with EVM */ +#define CONFIG_OMAP /* This is TI OMAP core */ +#define CONFIG_OMAP34XX /* belonging to 34XX family */ +#define CONFIG_OMAP3430 /* which is in a 3430 */ -#define CONFIG_SDRC /* The chip has SDRC controller */ +#define CONFIG_SDRC /* The chip has SDRC controller */ -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap3.h> +#define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */ +#define CONFIG_OMAP3_MICRON_DDR /* with MICRON DDR part */ +#define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */ /* - * Display CPU and Board information + * Get cpu and chip specific definitions */ -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 +#include <asm/arch/cpu.h> +#include <asm/arch/omap3.h> + +#undef CONFIG_USE_IRQ /* no support for IRQs */ -/* Clock Defines */ +/* + * Clock related definitions + */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ -#define CONFIG_MISC_INIT_R +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* Size of environment - 128KB */ +#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 +/* Size of malloc pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) /* - * Size of malloc() pool + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ +#endif + /* + * Physical Memory Map + * Note 1: CS1 may or may not be populated + * Note 2: SDRAM size is expected to be at least 32MB + */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE (32 << 20) +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C + +/* Limits for memtest */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +/* Default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) + +/* ----------------------------------------------------------------------------- * Hardware drivers + * ----------------------------------------------------------------------------- */ /* @@ -88,29 +126,88 @@ * select serial console configuration */ #define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 #define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -#define CONFIG_MMC 1 -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 -/* DDR - I use Micron DDR */ -#define CONFIG_OMAP3_MICRON_DDR 1 +/* + * I2C + */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_OMAP34XX_I2C + +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 + +/* + * PISMO support + */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +/* Monitor at start of flash - Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) + +/* Start location & size of environment */ +#define ONENAND_ENV_OFFSET 0x260000 +#define SMNAND_ENV_OFFSET 0x260000 + +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ + +/* + * NAND + */ +/* Physical address to access NAND */ +#define CONFIG_SYS_NAND_ADDR NAND_BASE + +/* Physical address to access NAND at CS0 */ +#define CONFIG_SYS_NAND_BASE NAND_BASE + +/* Max number of NAND devices */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Timeout values (in ticks) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) + +#define CONFIG_SYS_JFFS2_MEM_NAND +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* Start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +/* Size of jffs2 partition */ +#define CONFIG_JFFS2_PART_SIZE 0xf980000 + +/* + * MMC + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION /* USB + * * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard * Enable CONFIG_MUSB_UDD for Device functionalities. */ -#define CONFIG_USB_OMAP3 1 -#define CONFIG_MUSB_HCD 1 -/* #define CONFIG_MUSB_UDC 1 */ +#define CONFIG_USB_OMAP3 +#define CONFIG_MUSB_HCD +/* #define CONFIG_MUSB_UDC */ #ifdef CONFIG_USB_OMAP3 @@ -123,16 +220,17 @@ #ifdef CONFIG_USB_KEYBOARD #define CONFIG_SYS_USB_EVENT_POLL -#define CONFIG_PREBOOT "usb start" +#define CONFIG_PREBOOT "usb start" #endif /* CONFIG_USB_KEYBOARD */ #endif /* CONFIG_MUSB_HCD */ #ifdef CONFIG_MUSB_UDC /* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +#define CONFIG_USB_DEVICE +#define CONFIG_USB_TTY +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + /* Change these to suit your needs */ #define CONFIG_USBD_VENDORID 0x0451 #define CONFIG_USBD_PRODUCTID 0x5678 @@ -142,7 +240,44 @@ #endif /* CONFIG_USB_OMAP3 */ -/* commands to include */ +/* ---------------------------------------------------------------------------- + * U-boot features + * ---------------------------------------------------------------------------- + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "OMAP3_EVM # " +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_MAXARGS 16 /* max args for a command */ + +/* Display CPU and Board information */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Add auto-completion support */ +#define CONFIG_AUTO_COMPLETE + +/* Size of Console IO buffer */ +#define CONFIG_SYS_CBSIZE 512 + +/* Size of print buffer */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Size of bootarg buffer */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +/* Default commands to include */ #include <config_cmd_default.h> #define CONFIG_CMD_EXT2 /* EXT2 Support */ @@ -160,40 +295,64 @@ #undef CONFIG_CMD_IMI /* iminfo */ #undef CONFIG_CMD_IMLS /* List all found images */ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_BUS 0 -#define CONFIG_SYS_I2C_BUS_SELECT 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 - /* - * TWL4030 + * Additional definitions that depend on chosen commands */ -#define CONFIG_TWL4030_POWER 1 +/* NAND */ +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE -/* - * Board NAND Info. +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET +#elif defined(CONFIG_CMD_ONENAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP + +#define CONFIG_ENV_IS_IN_ONENAND +#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET +#endif + +#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET + +#if defined(CONFIG_CMD_NET) + +/* Ethernet (SMSC9115 from SMSC9118 family) */ +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE 0x2C000000 + +/* BOOTP fields */ +#define CONFIG_BOOTP_SUBNETMASK 0x00000001 +#define CONFIG_BOOTP_GATEWAY 0x00000002 +#define CONFIG_BOOTP_HOSTNAME 0x00000004 +#define CONFIG_BOOTP_BOOTPATH 0x00000010 + +#endif /* CONFIG_CMD_NET */ + +/* Support for relocation */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +/* ----------------------------------------------------------------------------- + * Board specific + * ----------------------------------------------------------------------------- */ -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ - /* to access nand */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access */ - /* nand at CS0 */ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ - /* NAND devices */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ +#define CONFIG_SYS_NO_FLASH -/* Environment information */ -#define CONFIG_BOOTDELAY 10 +/* Uncomment to define the board revision statically */ +/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ +/* ----------------------------------------------------------------------------- + * Default environment + * ----------------------------------------------------------------------------- + */ +#define CONFIG_BOOTDELAY 10 #define CONFIG_BOOTFILE "uImage" #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -231,133 +390,4 @@ "fi; " \ "else run nandboot; fi" -#define CONFIG_AUTO_COMPLETE 1 -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "OMAP3_EVM # " -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command */ - /* args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ - 0x01F00000) /* 31MB */ - -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ - /* address */ - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE -#elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE -#endif - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_NAND_OMAP_GPMC -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET -#elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_ENV_IS_IN_ONENAND 1 -#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET -#endif - -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET - -/* - * Support for relocation - */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* - * Define the board revision statically - */ -/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ - -/*---------------------------------------------------------------------------- - * SMSC9115 Ethernet from SMSC9118 family - *---------------------------------------------------------------------------- - */ -#if defined(CONFIG_CMD_NET) - -#define CONFIG_SMC911X -#define CONFIG_SMC911X_32_BIT -#define CONFIG_SMC911X_BASE 0x2C000000 - -#endif /* (CONFIG_CMD_NET) */ - -/* - * BOOTP fields - */ - -#define CONFIG_BOOTP_SUBNETMASK 0x00000001 -#define CONFIG_BOOTP_GATEWAY 0x00000002 -#define CONFIG_BOOTP_HOSTNAME 0x00000004 -#define CONFIG_BOOTP_BOOTPATH 0x00000010 - #endif /* __CONFIG_H */ |